summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r--Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx652
-rw-r--r--Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins62
2 files changed, 714 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx
new file mode 100644
index 00000000000..9022bfe6df8
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx
@@ -0,0 +1,652 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2011 by Sven Harder
+% -----------------------------------
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in:
+%
+% http://www.latex-project.org/lppl.txt
+%
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+%
+% The Current Maintainer of this work is Sven Harder.
+%
+% This work consists of the files cookingsymbols.dtx and cookingsymbols.ins
+% and the derived files cookingsymbols.sty and cookingsymbols.mf.
+%
+% \fi
+%
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{cookingsymbols}
+%<package>[2011/11/02 v1.0 symbols for recipes by Sven Harder]
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{cookingsymbols}
+\usepackage[T1]{fontenc}
+\usepackage{lmodern}
+\usepackage{booktabs}
+\usepackage{mflogo}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+\addtolength{\oddsidemargin}{-1cm}
+\begin{document}
+ \DocInput{cookingsymbols.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{47}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+%
+% \changes{v1.0}{2011/11/02}{Initial version}
+%
+% \GetFileInfo{cookingsymbols.sty}
+%
+% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ }
+% \DoNotIndex{\@ne}
+% \DoNotIndex{\advance,\begingroup,\catcode,\closein}
+% \DoNotIndex{\closeout,\day,\def,\edef,\else,\empty,\endgroup}
+% \DoNotIndex{\begin,\end,\equal,beginchar,endchar}
+%
+% \title{The \textsf{cookingsymbols} package\thanks{This document
+% corresponds to \textsf{cookingsymbols}~\fileversion,
+% dated \filedate.}}
+% \author{Sven Harder \\ \texttt{sven\_one1@gmx.de}}
+%
+% \maketitle
+%
+% \section{Introduction}
+% This package includes 11 symbols. They are original created, when I was searching for symbols for typesetting recipes. However, I didn't find any symbols, so I decided to create my own ones. This is the result ;)
+%
+% At the end of creating these symbols, I realized that \MF\ is out of date. But at this time, I had no time to create the same symbols as vector based fonts. This is still a task for the future.
+%
+% \section{Symbols}
+% The following symbols are created by this package and are available by these macros. \textbf{Important:} The symbols are enhanced for a better view (by \textbackslash Large).
+% \begin{center}
+% \begin{tabular}[h]{rl}
+% \bf Macro & \bf Symbol \\
+% \toprule
+% \textbackslash Oven & \Large\Oven \\
+% \textbackslash Topbottomheat & \Large\Topbottomheat \\
+% \textbackslash Topheat & \Large\Topheat\\
+% \textbackslash Bottomheat & \Large\Bottomheat\\
+% \textbackslash Fanoven & \Large\Fanoven\\
+% \textbackslash Gasstove & \Large\Gasstove\\
+% \textbackslash Dish & \Large\Dish\\
+% \textbackslash Knife & \Large\Knife\\
+% \textbackslash Fork & \Large\Fork\\
+% \textbackslash Spoon & \Large\Spoon\\
+% \textbackslash Gloves & \Large\Gloves\\
+% \end{tabular}
+% \end{center}
+% And now have fun with these new symbols!
+%
+% \StopEventually{\PrintIndex}
+%
+% \section{Implementation}
+%
+% \subsection{cookingsymbols.sty}
+% The following content can be found in the derived file \textsf{cookingsymbols.sty}. It includes the macros for an easy access and the definition of the (new) font.
+% \begin{macrocode}
+%<*package>
+
+\DeclareFontFamily{U}{cookingsymbols}{}
+
+\DeclareFontShape{U}{cookingsymbols}{m}{n}{<-> cookingsymbols}{}
+\DeclareFontShape{U}{cookingsymbols}{bx}{n}{<-> sub cookingsymbols/m/n }{}
+
+\newcommand{\Oven}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{0}}}
+\newcommand{\Topbottomheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{1}}}
+\newcommand{\Topheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{2}}}
+\newcommand{\Bottomheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{3}}}
+\newcommand{\Fanoven}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{4}}}
+\newcommand{\Gasstove}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{5}}}
+\newcommand{\Dish}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{6}}}
+\newcommand{\Knife}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{7}}}
+\newcommand{\Fork}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{8}}}
+\newcommand{\Spoon}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{9}}}
+\newcommand{\Gloves}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{10}}}
+
+%</package>
+% \end{macrocode}
+%
+% \subsection{cookingsymbols.mf}
+% The following content can be found in the derived file \textsf{cookingsymbols.mf}. In this file the symbols are defined by using \MF.
+% \begin{macrocode}
+%<*mf>
+
+mode_setup;
+
+font_coding_scheme = "cookingsymbols for recipes";
+font_identifier = "cookingsymbols";
+
+u#:=0.68pt#;
+define_pixels(u);
+
+font_size 10pt#;
+%design_size=10pt#;
+linewidth=0.4pt;
+
+thinpen.w := 0.5linewidth;
+pen normalpen, thinpen;
+normalpen := pencircle scaled 1linewidth;
+thinpen := pencircle scaled thinpen.w;
+
+% \end{macrocode}
+%
+% \subsubsection{Oven}
+% \begin{macrocode}
+%% oven symbol
+"Oven";
+beginchar(0,10u#,10u#,0);
+ pickup pencircle scaled 0.75 linewidth;
+
+ % Umrandung
+ y1=y2; y3=y4;
+ x1=x4; x2=x3;
+ x2-x1=w;
+ y2-y3=h;
+ z4=(0u, 0u);
+ draw z1--z2--z3--z4--cycle;
+
+ % Ofenklappe
+ r:=1u; % Radius
+ z5=z4+(r+0.7u, 0.7u);
+ x5=x8; x6=x7;
+ x9=x12; x10=x11;
+ y5=y12; y6=y11;
+ y7=y10; y8=y9;
+
+ z6=z5+(-r, r);
+ z8=z7+(r,r);
+ z10=z9+(r,-r);
+ x11-x6=w-1.4u; % Breite
+ y8-y5=6.3u; % Höhe
+
+ fill z5{left}..z6{up}..z7{up}..z8{right}..z9{right}..z10{down}..z11{down}..z12{left}..cycle;
+
+ % Ofengriff
+ b:=3.2u; % Breite vom Griff
+ h1:=0.5u; % Höhe
+ z14=z8+((x9-x8)/2-b/2, -0.8u);
+ x14=x13; x15=x16;
+ x16=x13+b;
+ y14=y13+h1;
+ y15=y14;
+ y16=y13;
+
+ unfill z13--z14--z15--z16--cycle;
+
+ % Display
+ b:=2.8u; % Breite vom Display
+ h1:=1.05u; % Höhe
+ z17=z1+(0.8u, -1u);
+ x18=x19; x20=x17;
+ y18=y17; y19=y20;
+ x18-x17=b;
+ y18-y19=h1;
+
+ fill z17--z18--z19--z20--cycle;
+
+ % Knöpfe
+ r:=0.48u; % Radius der Knöpfe
+ b:=1.3u; % Abstand der Knöpfe untereinander
+ h1:=y19+(y18-y19)/2;
+ x:=x18+0.8u;
+ x21=x23; y24=y22;
+ z24=(x,h1);
+ z23=(x+r,h1-r);
+ x22=x24+2*r;
+ y21=y23+2*r;
+ %fill z21..z22..z23..z24..cycle;
+
+ for i=0 upto 3:
+ fill (z21+(i*1b,0))..(z22+(i*b,0))..(z23+(i*b,0))..(z24+(i*b,0))..cycle;
+ endfor
+
+ %labels(range 1 thru 24);
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Top and bottom heat}
+% \begin{macrocode}
+%% top and bottomheat symbol
+"Topbottomheat";
+beginchar(1,11u#,10u#,0);
+ pickup normalpen;
+ % Umrandung
+ ra:=1.0u; % Radius der Umrandung
+ y1=y4; y2=y3;
+ y5=y8; y6=y7;
+ x1=x8; x2=x7;
+ x3=x6; x4=x5;
+
+ z2=z1+(ra,ra);
+ z4=z3+(ra,-ra);
+ z8=z7+(-ra,ra);
+ x4-x1=w;
+ y2-y7=h;
+ z8=(0,ra);
+
+ draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+
+ % Stäbe
+ pickup pensquare scaled 1.15linewidth;
+ % Oberhitze
+ xa:=1.4u; % Abstand zum Rand
+ ya:=1.85u;
+ z9=(xa, (y2-y7)-ya);
+ x10=(x4-x1)-xa;
+ y10=y9;
+ draw z9..z10;
+
+ % Unterhitze
+ x11=x9;x12=x10;
+ y11=ya;
+ y12=y11;
+ draw z11..z12;
+
+ %labels(range 1 thru 12);
+
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Top heat}
+% This is nearly the same definition as \textsf{Topbottomheat}, except there is only one rod.
+% \begin{macrocode}
+%% top heat symbol
+"Topheat";
+beginchar(2,11u#,10u#,0);
+ pickup normalpen;
+ % Umrandung
+ ra:=1.0u; % Radius der Umrandung
+ y1=y4; y2=y3;
+ y5=y8; y6=y7;
+ x1=x8; x2=x7;
+ x3=x6; x4=x5;
+
+ z2=z1+(ra,ra);
+ z4=z3+(ra,-ra);
+ z8=z7+(-ra,ra);
+ x4-x1=w;
+ y2-y7=h;
+ z8=(0,ra);
+
+ draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+
+ % Stäbe
+ pickup pensquare scaled 1.15linewidth;
+ % Oberhitze
+ xa:=1.4u; % Abstand zum Rand
+ ya:=1.85u;
+ z9=(xa, (y2-y7)-ya);
+ x10=(x4-x1)-xa;
+ y10=y9;
+ draw z9..z10;
+
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Bottom heat}
+% This is nearly the same definition as \textsf{Topbottomheat}, except there is only one rod.
+% \begin{macrocode}
+%% bottom heat symbol
+"Bottomheat";
+beginchar(3,11u#,10u#,0);
+ pickup normalpen;
+ % Umrandung
+ ra:=1.0u; % Radius der Umrandung
+ y1=y4; y2=y3;
+ y5=y8; y6=y7;
+ x1=x8; x2=x7;
+ x3=x6; x4=x5;
+
+ z2=z1+(ra,ra);
+ z4=z3+(ra,-ra);
+ z8=z7+(-ra,ra);
+ x4-x1=w;
+ y2-y7=h;
+ z8=(0,ra);
+
+ draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+
+ % Stäbe
+ pickup pensquare scaled 1.15linewidth;
+ % Oberhitze
+ xa:=1.4u; % Abstand zum Rand
+ ya:=1.85u;
+ z9=(xa, (y2-y7)-ya);
+ x10=(x4-x1)-xa;
+ y10=y9;
+
+ % Unterhitze
+ x11=x9;x12=x10;
+ y11=ya;
+ y12=y11;
+ draw z11..z12;
+
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Fanoven}
+% \begin{macrocode}
+%% fanoven symbol
+"Fanoven";
+beginchar(4,11u#,10u#,0);
+ pickup normalpen;
+ % Umrandung
+ ra:=1.0u; % Radius der Umrandung
+ y1=y4; y2=y3;
+ y5=y8; y6=y7;
+ x1=x8; x2=x7;
+ x3=x6; x4=x5;
+
+ z2=z1+(ra,ra);
+ z4=z3+(ra,-ra);
+ z8=z7+(-ra,ra);
+ x4-x1=w;
+ y2-y7=h;
+ z8=(0,ra);
+
+ draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+
+ % Propeller
+ z15=(w/2,(h/2)-1.05u); % Rotationspunkt
+ a:=1.3; % Skalierungsfaktor
+ z9=z15+a*(0.95u,2.66u);
+ %z9=z15+(0.8u,3u);
+ y10=y9;
+ x10=w-x9;
+ z11=z9 rotatedaround(z15,120);
+ z12=z10 rotatedaround(z15,120);
+ z13=z9 rotatedaround(z15,-120);
+ z14=z10 rotatedaround(z15,-120);
+
+ z16=z15 + a*(0,4u);
+ z17=z16 rotatedaround(z15,120);
+ z18=z16 rotatedaround(z15,-120);
+
+ %draw z15..z9{1,3}..z10{-1,-3}..z15..z13..z14..z15..z11..z12..cycle;
+ %draw z9..z16{dir 180}..z10..z13..z18{dir 60}..z14..z11..z17{dir 300}..z12..cycle;
+ %fill z9..z16{dir 180}..z10..z13..z18{dir 60}..z14..z11..z17{dir 300}..z12..cycle;
+ fill z9{dir 90}..z16{dir 180}..z10{dir 270}..z13{dir -30}..z18{dir 60}..z14{dir 150}..z11{dir 210}..z17{dir 300}..z12{dir 30}..cycle;
+
+ %labels(range 1 thru 18);
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Gasstove}
+% \begin{macrocode}
+%% gasstove symbol
+"Gasstove";
+beginchar(5,11u#,10u#,0);
+ pickup normalpen;
+ % Umrandung
+ ra:=1.0u; % Radius der Umrandung
+ y1=y4; y2=y3;
+ y5=y8; y6=y7;
+ x1=x8; x2=x7;
+ x3=x6; x4=x5;
+
+ z2=z1+(ra,ra);
+ z4=z3+(ra,-ra);
+ z8=z7+(-ra,ra);
+ x4-x1=w;
+ y2-y7=h;
+ z8=(0,ra);
+
+ draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+
+ % Flamme
+ z9=(w/2,1.0u); % Ursprung
+ z10=(w/2,9u); % Endpunkt
+ z11=z9+(-1.4u, 3.1u);
+ x12=w-x11;y12=y11;
+ %z12=z9+(1.5u, 3.5u);
+
+ fill z9{dir 135}..z11{up}..z10{dir 70}--cycle;
+ %fill z9{dir 145}..z10{dir 65}--cycle;
+
+ fill z9{dir 45}..z12{up}..z10{dir 110}--cycle;
+
+ % Innere Flamme
+ z13=z9+(0,0.7u); % Urspung
+ z14=z13+(0, 3.7u); % Endpunkt
+ z15=z9+(-0.5u,2.1u);
+ z16=z9+(0.5u, 2.1u);
+
+ unfill z13{dir 130}..z15{up}..z14{dir 65}--cycle;
+
+ unfill z13{dir 60}..z16{up}..z14{dir 115}--cycle;
+
+ %labels(range 1 thru 16);
+
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Dish}
+% This is the definition of two circles (with different radii).
+% \begin{macrocode}
+%% dish symbol
+"Dish";
+beginchar(6,10u#,10u#,0);
+ pickup normalpen;
+ ra:=0.5h;
+ x1=x3;y4=y2;
+ z4=(0,ra);
+ z3=(ra,0);
+ x2=x4+2*ra;
+ y1=y3+2*ra;
+ draw z1..z2..z3..z4..cycle;
+
+ ri:=3.7u;
+ x5=x7;y8=y6;
+ z8=(ra-ri,ra);
+ z7=(ra,ra-ri);
+ y6=0.5*(y5-y7) + (ra-ri);
+ x5=0.5*(x6-x8) + (ra-ri);
+ draw z5..z6..z7..z8..cycle;
+
+% labels(range 1 thru 8);
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Knife}
+% \begin{macrocode}
+%% knife symbol
+"Knife";
+beginchar(7,1.7u#,10u#,0);
+ pickup normalpen;
+ b:=0.8u; % Breite des Stiels
+ z1=(w, 0u);
+ x2=x1-b; y2=y1;
+
+ z5=(x2,4.8u);
+ z6=z5+(-0.85u, 2u);
+ x7=x1; y7=y1+10u;
+
+
+ fill z1--z2--z5{dir 150}..z6{up}..z7--cycle;
+
+ %labels(range 1 thru 11);
+
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Fork}
+% \begin{macrocode}
+%% fork symbol
+"Fork";
+beginchar(8,2u#,10u#,0);
+ pickup normalpen;
+
+ b:=0.8u; % Breite des Stiels
+ zb:=0.2u; % Zackenbreite
+ za=0.4u; % Zackenabstand
+ z1=(w/2+b/2, 0u);
+ x2=x1-b; y2=y1;
+ x3=x2; y3=y2+6u;
+ x4=x1; y4=y3;
+
+ fill z1--z2--z3--z4--cycle;
+
+ x5=x3-(4*zb+3*za)/2 +b/2;
+ y5=y3+1.9u;
+ x6=x5; y6=y5+2.1u;
+ x7=x6+zb; y7=y6;
+ x8=x7; y8=y5;
+
+ x9=x8+za; y9=y8;
+ x10=x9; y10=y6;
+ x11=x10+zb; y11=y10;
+ x12=x11; y12=y9;
+
+ x13=x12+za; y13=y12;
+ x14=x13; y14=y6;
+ x15=x14+zb; y15=y14;
+ x16=x15; y16=y5;
+
+ x17=x16+za; y17=y16;
+ x18=x17; y18=y6;
+ x19=x18+zb; y19=y18;
+ x20=x19; y20=y5;
+
+ fill z3{dir 130}..z5{up}--z6--z7--z8--z9--z10--z11--z12--z13--z14--z15--z16--z17--z18--z19--z20{down}..z4{dir 230}..cycle;
+
+ %labels(range 1 thru 20);
+
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Spoon}
+% \begin{macrocode}
+%% spoon symbol
+"Spoon";
+beginchar(9, 3.4u#, 10u#,0);
+ pickup normalpen;
+
+ b:=0.8u; % Breite des Stiels
+ % Stiel
+ z1=(w/2+b/2, 0u);
+ x2=x1-b; y2=y1;
+ x3=x2; y3=y2+5.74u;
+ x4=x1; y4=y3;
+
+ fill z1--z2--z3--z4--cycle;
+
+ % Oberteil
+ x5=x3-1.0u;
+ x6=x4+(x3-x5);
+ y5=y6=y3+(y7-y3)/2 - 0.2u; % halbe Breite
+ z7=(x3+(x4-x3)/2, y3+4u); % y: maximale Ausdehnung
+
+ draw z7{dir -170}..z5{down}..(x3+(x4-x3)/2, y3){dir -10};
+ draw (x3+(x4-x3)/2, y3){dir 10}..z6{up}..z7{dir 170};%..(z7-(b/2, 0));
+ %draw z3{dir 150}..z5{up}..z7{right}; umdrehen!
+ %draw z7{right}..z6{down}..z4{dir -150}..z3;
+ %draw z3{dir 170}..z5{dir 75}..z7{right}..z6{dir -75}..z4{dir -170}..z3;
+
+ %labels(range 1 thru 12);
+endchar;
+
+% \end{macrocode}
+%
+% \subsubsection{Gloves}
+% \begin{macrocode}
+%% gloves symbol
+"Gloves";
+beginchar(10,10.4u#,10u#,0);
+ pickup thinpen;
+
+ a:=1.05; % Skalierungsfaktor
+ breite:=a*4.3u; % Breite unten am Handschuh
+ hoehe:=a*1.8u;
+
+ z5=a*(3.3u-0.4u, 3u); % Rotationspunkt 1. Handschuh
+ z9=z5 + a*(-0.55u, 0.1u); % Rotationspunkt 2. Handschuh
+ alpha:=-37; % Rotationswinkel -37
+ beta:=-26; % Verschiebung des zweiten Handschuhs bzgl. des oberen
+
+ % Oberer Handschuh
+ z4=(0.8u, 1u);
+ x1=x4; x2=x3;
+ y1=y2; y3=y4;
+ x2-x1=breite;
+ y1-y4=hoehe;
+
+ fill z1--z2--z3--z4--cycle rotatedaround(z5, alpha);
+
+ % Daumen
+ z7=z1 + a*(0.5thinpen.w+0.2u, 3.5u);
+ z6=z7 + a*(-1.2u, 1.3u);
+
+ draw ((z1+(0.5thinpen.w,0)){up}..z6{dir 75}..z7{dir -80}) rotatedaround(z5, alpha);
+
+ % Oberer Rand/Begrenzung
+ z8=z1 + ((x2-x1)/2 + a*0.2u, a*8.2u);
+
+ draw (z7{dir 90}..z8{right}..(z2+(-0.5thinpen.w,0)){dir -90}) rotatedaround(z5, alpha);
+
+
+
+ % Zweiter Handschuh
+ fill z1--(z1-(-a*0.8u, (y1-y4)/2+a*0.6u))--z4--cycle rotatedaround(z9, alpha+beta);
+
+ fill z4--z2--z3--cycle rotatedaround(z9, alpha+beta);
+
+ %z10=z1 + a*(1u, 7.55u); % Schnittpunkt der beiden Handschuhe
+ z10=z1 + a*(1u, 7.75u);
+
+ draw (z10..z8{right}..z2{dir -90}) rotatedaround(z9, alpha+beta);
+
+
+
+ % 'Weißer' Trennstrich
+ z11=z3 - (0, 0.5thinpen.w);
+ x12=x1; y12=y11;
+ unfill (z4--z3--z11--z12--cycle) rotatedaround(z5, alpha);
+
+
+ %labels(range 1 thru 20);
+endchar;
+
+end
+%</mf>
+% \end{macrocode}
+%
+% \Finale
+\endinput \ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins
new file mode 100644
index 00000000000..0dc0cbafb47
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins
@@ -0,0 +1,62 @@
+ %% --------------------- cookingsymbols.ins -------------------------
+
+
+\def\filedate{2011/11/02}
+\def\batchfile{cookingsymbols.ins}
+
+\input docstrip
+\ifx\generate\undefined
+ \obeyspaces
+ \Msg{************************************************}
+ \Msg{* *}
+ \Msg{* This installation requires docstrip *}
+ \Msg{* version 2.4 or later. *}
+ \Msg{* *}
+ \Msg{* An older version of docstrip has been input. *}
+ \Msg{* *}
+ \Msg{************************************************}
+ \errhelp{Move or rename old docstrip.tex and get a newer one.}
+ \errmessage{Old docstrip in input path}
+ \batchmode
+ \csname @@end\endcsname\end
+\fi
+
+\keepsilent
+\askforoverwritefalse
+
+\preamble
+
+This is a generated file.
+Copyright (C) 2011 by Sven Harder
+
+This file may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.3 of this license or (at your option) any later
+version. The latest version of this license is in:
+
+http://www.latex-project.org/lppl.txt
+
+and version 1.3 or later is part of all distributions of
+LaTeX version 2005/12/01 or later.
+\endpreamble
+
+\declarepostamble\mfpostamble
+\endpostamble
+
+\generate
+{%
+ \file{cookingsymbols.sty}{\from{cookingsymbols.dtx}{package}}
+ \usepostamble\mfpostamble
+ \file{cookingsymbols.mf}{\from{cookingsymbols.dtx}{mf}}
+}
+ \obeyspaces
+ \Msg{**********************************************************************}
+ \Msg{* *}
+ \Msg{* To finish the installation you have to copy the file *}
+ \Msg{* *}
+ \Msg{* *.sty and *.mf into a directory in the search path by TeX *}
+ \Msg{* *}
+ \Msg{**********************************************************************}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\endinput