cookingsymbols (6nov11)

git-svn-id: svn://tug.org/texlive/trunk@24526 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 714 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx
new file mode 100644
index 00000000000..9022bfe6df8
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.dtx
@@ -0,0 +1,652 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2011 by Sven Harder
+% -----------------------------------
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in:
+%
+% http://www.latex-project.org/lppl.txt
+%
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+% 
+% The Current Maintainer of this work is Sven Harder.
+%
+% This work consists of the files cookingsymbols.dtx and cookingsymbols.ins
+% and the derived files cookingsymbols.sty and cookingsymbols.mf.
+%
+% \fi
+%
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{cookingsymbols}
+%<package>[2011/11/02 v1.0 symbols for recipes by Sven Harder]
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{cookingsymbols}
+\usepackage[T1]{fontenc}
+\usepackage{lmodern}
+\usepackage{booktabs}
+\usepackage{mflogo}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+\addtolength{\oddsidemargin}{-1cm}
+\begin{document}
+    \DocInput{cookingsymbols.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{47}
+%
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+%
+% \changes{v1.0}{2011/11/02}{Initial version}
+%
+% \GetFileInfo{cookingsymbols.sty}
+%
+% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ }
+% \DoNotIndex{\@ne}
+% \DoNotIndex{\advance,\begingroup,\catcode,\closein}
+% \DoNotIndex{\closeout,\day,\def,\edef,\else,\empty,\endgroup}
+% \DoNotIndex{\begin,\end,\equal,beginchar,endchar}
+%
+% \title{The \textsf{cookingsymbols} package\thanks{This document
+% corresponds to \textsf{cookingsymbols}~\fileversion,
+% dated \filedate.}}
+% \author{Sven Harder \\ \texttt{sven\_one1@gmx.de}}
+%
+% \maketitle
+%
+% \section{Introduction}
+%  This package includes 11 symbols. They are original created, when I was searching for symbols for typesetting recipes. However, I didn't find any symbols, so I decided to create my own ones. This is the result ;)
+%
+%  At the end of creating these symbols, I realized that \MF\ is out of date. But at this time, I had no time to create the same symbols as vector based fonts. This is still a task for the future.
+%
+%  \section{Symbols}
+%  The following symbols are created by this package and are available by these macros. \textbf{Important:} The symbols are enhanced for a better view (by \textbackslash Large).
+%  \begin{center}
+%    \begin{tabular}[h]{rl}
+%      \bf Macro & \bf Symbol \\
+%      \toprule
+%      \textbackslash Oven & \Large\Oven \\
+%      \textbackslash Topbottomheat & \Large\Topbottomheat \\
+%      \textbackslash Topheat & \Large\Topheat\\
+%      \textbackslash Bottomheat & \Large\Bottomheat\\
+%      \textbackslash Fanoven & \Large\Fanoven\\
+%      \textbackslash Gasstove & \Large\Gasstove\\
+%      \textbackslash Dish & \Large\Dish\\
+%      \textbackslash Knife & \Large\Knife\\
+%      \textbackslash Fork & \Large\Fork\\
+%      \textbackslash Spoon & \Large\Spoon\\
+%      \textbackslash Gloves & \Large\Gloves\\
+%    \end{tabular}
+%  \end{center}
+%  And now have fun with these new symbols!
+%
+% \StopEventually{\PrintIndex}
+%
+% \section{Implementation}
+%
+% \subsection{cookingsymbols.sty}
+% The following content can be found in the derived file \textsf{cookingsymbols.sty}. It includes the macros for an easy access and the definition of the (new) font.
+%    \begin{macrocode}
+%<*package>
+
+\DeclareFontFamily{U}{cookingsymbols}{}
+
+\DeclareFontShape{U}{cookingsymbols}{m}{n}{<-> cookingsymbols}{}
+\DeclareFontShape{U}{cookingsymbols}{bx}{n}{<-> sub cookingsymbols/m/n }{}
+
+\newcommand{\Oven}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{0}}}
+\newcommand{\Topbottomheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{1}}}
+\newcommand{\Topheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{2}}}
+\newcommand{\Bottomheat}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{3}}}
+\newcommand{\Fanoven}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{4}}}
+\newcommand{\Gasstove}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{5}}}
+\newcommand{\Dish}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{6}}}
+\newcommand{\Knife}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{7}}}
+\newcommand{\Fork}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{8}}}
+\newcommand{\Spoon}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{9}}}
+\newcommand{\Gloves}{{\usefont{U}{cookingsymbols}{m}{n}\symbol{10}}}
+
+%</package>
+%    \end{macrocode}
+%
+% \subsection{cookingsymbols.mf}
+% The following content can be found in the derived file \textsf{cookingsymbols.mf}. In this file the symbols are defined by using \MF. 
+%    \begin{macrocode}
+%<*mf>
+
+mode_setup;
+
+font_coding_scheme = "cookingsymbols for recipes"; 
+font_identifier = "cookingsymbols";
+
+u#:=0.68pt#;
+define_pixels(u);
+
+font_size 10pt#;
+%design_size=10pt#;
+linewidth=0.4pt;
+
+thinpen.w := 0.5linewidth;
+pen normalpen, thinpen;
+normalpen := pencircle scaled 1linewidth;
+thinpen := pencircle scaled thinpen.w;
+
+%    \end{macrocode}
+%
+% \subsubsection{Oven}
+%    \begin{macrocode}
+%% oven symbol
+"Oven";
+beginchar(0,10u#,10u#,0);
+  pickup pencircle scaled 0.75 linewidth;
+
+  % Umrandung
+  y1=y2; y3=y4;
+  x1=x4; x2=x3;
+  x2-x1=w;
+  y2-y3=h;
+  z4=(0u, 0u);
+  draw z1--z2--z3--z4--cycle;
+
+  % Ofenklappe
+  r:=1u; % Radius
+  z5=z4+(r+0.7u, 0.7u);
+  x5=x8; x6=x7;
+  x9=x12; x10=x11;
+  y5=y12; y6=y11;
+  y7=y10; y8=y9;
+  
+  z6=z5+(-r, r);
+  z8=z7+(r,r);
+  z10=z9+(r,-r);
+  x11-x6=w-1.4u; % Breite
+  y8-y5=6.3u; % Höhe
+  
+  fill z5{left}..z6{up}..z7{up}..z8{right}..z9{right}..z10{down}..z11{down}..z12{left}..cycle;
+  
+  % Ofengriff
+  b:=3.2u; % Breite vom Griff
+  h1:=0.5u; % Höhe
+  z14=z8+((x9-x8)/2-b/2, -0.8u);
+  x14=x13; x15=x16;
+  x16=x13+b;
+  y14=y13+h1;
+  y15=y14;
+  y16=y13;
+  
+  unfill z13--z14--z15--z16--cycle;
+  
+  % Display
+  b:=2.8u; % Breite vom Display
+  h1:=1.05u;   % Höhe
+  z17=z1+(0.8u, -1u);
+  x18=x19; x20=x17;
+  y18=y17; y19=y20;
+  x18-x17=b;
+  y18-y19=h1;
+  
+  fill z17--z18--z19--z20--cycle;
+  
+  % Knöpfe
+  r:=0.48u; % Radius der Knöpfe
+  b:=1.3u; % Abstand der Knöpfe untereinander
+  h1:=y19+(y18-y19)/2;
+  x:=x18+0.8u;
+  x21=x23; y24=y22;
+  z24=(x,h1);
+  z23=(x+r,h1-r);
+  x22=x24+2*r;
+  y21=y23+2*r;  
+  %fill z21..z22..z23..z24..cycle;
+  
+  for i=0 upto 3:
+    fill (z21+(i*1b,0))..(z22+(i*b,0))..(z23+(i*b,0))..(z24+(i*b,0))..cycle;
+  endfor
+  
+  %labels(range 1 thru 24);
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Top and bottom heat}
+%    \begin{macrocode}
+%% top and bottomheat symbol
+"Topbottomheat";
+beginchar(1,11u#,10u#,0);
+  pickup normalpen;
+  % Umrandung
+  ra:=1.0u; % Radius der Umrandung
+  y1=y4; y2=y3;
+  y5=y8; y6=y7;
+  x1=x8; x2=x7;
+  x3=x6; x4=x5;
+  
+  z2=z1+(ra,ra);
+  z4=z3+(ra,-ra);
+  z8=z7+(-ra,ra);
+  x4-x1=w;
+  y2-y7=h;
+  z8=(0,ra);
+  
+  draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+  
+  % Stäbe
+  pickup pensquare scaled 1.15linewidth;
+  % Oberhitze
+  xa:=1.4u; % Abstand zum Rand
+  ya:=1.85u;
+  z9=(xa, (y2-y7)-ya);
+  x10=(x4-x1)-xa;
+  y10=y9;
+  draw z9..z10;
+  
+  % Unterhitze
+  x11=x9;x12=x10;
+  y11=ya;
+  y12=y11;
+  draw z11..z12;
+  
+  %labels(range 1 thru 12);
+
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Top heat}
+% This is nearly the same definition as \textsf{Topbottomheat}, except there is only one rod.
+%    \begin{macrocode}
+%% top heat symbol
+"Topheat";
+beginchar(2,11u#,10u#,0);
+  pickup normalpen;
+  % Umrandung
+  ra:=1.0u; % Radius der Umrandung
+  y1=y4; y2=y3;
+  y5=y8; y6=y7;
+  x1=x8; x2=x7;
+  x3=x6; x4=x5;
+  
+  z2=z1+(ra,ra);
+  z4=z3+(ra,-ra);
+  z8=z7+(-ra,ra);
+  x4-x1=w;
+  y2-y7=h;
+  z8=(0,ra);
+  
+  draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+  
+  % Stäbe
+  pickup pensquare scaled 1.15linewidth;
+  % Oberhitze
+  xa:=1.4u; % Abstand zum Rand
+  ya:=1.85u;
+  z9=(xa, (y2-y7)-ya);
+  x10=(x4-x1)-xa;
+  y10=y9;
+  draw z9..z10;
+  
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Bottom heat}
+% This is nearly the same definition as \textsf{Topbottomheat}, except there is only one rod.
+%    \begin{macrocode}
+%% bottom heat symbol
+"Bottomheat";
+beginchar(3,11u#,10u#,0);
+  pickup normalpen;
+  % Umrandung
+  ra:=1.0u; % Radius der Umrandung
+  y1=y4; y2=y3;
+  y5=y8; y6=y7;
+  x1=x8; x2=x7;
+  x3=x6; x4=x5;
+  
+  z2=z1+(ra,ra);
+  z4=z3+(ra,-ra);
+  z8=z7+(-ra,ra);
+  x4-x1=w;
+  y2-y7=h;
+  z8=(0,ra);
+  
+  draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+  
+  % Stäbe
+  pickup pensquare scaled 1.15linewidth;
+  % Oberhitze
+  xa:=1.4u; % Abstand zum Rand
+  ya:=1.85u;
+  z9=(xa, (y2-y7)-ya);
+  x10=(x4-x1)-xa;
+  y10=y9;
+  
+  % Unterhitze
+  x11=x9;x12=x10;
+  y11=ya;
+  y12=y11;
+  draw z11..z12;
+  
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Fanoven}
+%    \begin{macrocode}
+%% fanoven symbol
+"Fanoven";
+beginchar(4,11u#,10u#,0);
+  pickup normalpen;
+  % Umrandung
+  ra:=1.0u; % Radius der Umrandung
+  y1=y4; y2=y3;
+  y5=y8; y6=y7;
+  x1=x8; x2=x7;
+  x3=x6; x4=x5;
+  
+  z2=z1+(ra,ra);
+  z4=z3+(ra,-ra);
+  z8=z7+(-ra,ra);
+  x4-x1=w;
+  y2-y7=h;
+  z8=(0,ra);
+  
+  draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+  
+  % Propeller
+  z15=(w/2,(h/2)-1.05u); % Rotationspunkt
+  a:=1.3; % Skalierungsfaktor
+  z9=z15+a*(0.95u,2.66u);
+  %z9=z15+(0.8u,3u);
+  y10=y9;
+  x10=w-x9;
+  z11=z9 rotatedaround(z15,120);
+  z12=z10 rotatedaround(z15,120);
+  z13=z9 rotatedaround(z15,-120);
+  z14=z10 rotatedaround(z15,-120);
+  
+  z16=z15 + a*(0,4u);
+  z17=z16 rotatedaround(z15,120);
+  z18=z16 rotatedaround(z15,-120);
+  
+  %draw z15..z9{1,3}..z10{-1,-3}..z15..z13..z14..z15..z11..z12..cycle;
+  %draw z9..z16{dir 180}..z10..z13..z18{dir 60}..z14..z11..z17{dir 300}..z12..cycle;
+  %fill z9..z16{dir 180}..z10..z13..z18{dir 60}..z14..z11..z17{dir 300}..z12..cycle;
+  fill z9{dir 90}..z16{dir 180}..z10{dir 270}..z13{dir -30}..z18{dir 60}..z14{dir 150}..z11{dir 210}..z17{dir 300}..z12{dir 30}..cycle;
+  
+  %labels(range 1 thru 18);
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Gasstove}
+%    \begin{macrocode}
+%% gasstove symbol
+"Gasstove";
+beginchar(5,11u#,10u#,0);
+  pickup normalpen;
+  % Umrandung
+  ra:=1.0u; % Radius der Umrandung
+  y1=y4; y2=y3;
+  y5=y8; y6=y7;
+  x1=x8; x2=x7;
+  x3=x6; x4=x5;
+  
+  z2=z1+(ra,ra);
+  z4=z3+(ra,-ra);
+  z8=z7+(-ra,ra);
+  x4-x1=w;
+  y2-y7=h;
+  z8=(0,ra);
+  
+  draw z1{up}..z2{right}..z3{right}..z4{down}..z5{down}..z6{left}..z7{left}..z8{up}..cycle;
+  
+  % Flamme
+  z9=(w/2,1.0u); % Ursprung
+  z10=(w/2,9u);  % Endpunkt
+  z11=z9+(-1.4u, 3.1u); 
+  x12=w-x11;y12=y11;
+  %z12=z9+(1.5u, 3.5u);
+  
+  fill z9{dir 135}..z11{up}..z10{dir 70}--cycle;
+  %fill z9{dir 145}..z10{dir 65}--cycle;
+  
+  fill z9{dir 45}..z12{up}..z10{dir 110}--cycle;
+  
+  % Innere Flamme
+  z13=z9+(0,0.7u); % Urspung
+  z14=z13+(0, 3.7u); % Endpunkt
+  z15=z9+(-0.5u,2.1u);
+  z16=z9+(0.5u, 2.1u);
+  
+  unfill z13{dir 130}..z15{up}..z14{dir 65}--cycle;
+  
+  unfill z13{dir 60}..z16{up}..z14{dir 115}--cycle;
+  
+  %labels(range 1 thru 16);
+
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Dish}
+% This is the definition of two circles (with different radii).
+%    \begin{macrocode}
+%% dish symbol
+"Dish";
+beginchar(6,10u#,10u#,0);
+  pickup normalpen;
+  ra:=0.5h;
+  x1=x3;y4=y2;
+  z4=(0,ra);
+  z3=(ra,0);
+  x2=x4+2*ra;
+  y1=y3+2*ra;
+  draw z1..z2..z3..z4..cycle;
+  
+  ri:=3.7u;
+  x5=x7;y8=y6;
+  z8=(ra-ri,ra);
+  z7=(ra,ra-ri);
+  y6=0.5*(y5-y7) + (ra-ri);
+  x5=0.5*(x6-x8) + (ra-ri);
+  draw z5..z6..z7..z8..cycle;
+  
+%  labels(range 1 thru 8);
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Knife}
+%    \begin{macrocode}
+%% knife symbol
+"Knife";
+beginchar(7,1.7u#,10u#,0);
+  pickup normalpen;
+  b:=0.8u; % Breite des Stiels
+  z1=(w, 0u);
+  x2=x1-b; y2=y1;
+  
+  z5=(x2,4.8u);  
+  z6=z5+(-0.85u, 2u);
+  x7=x1; y7=y1+10u;
+
+
+  fill z1--z2--z5{dir 150}..z6{up}..z7--cycle;
+  
+  %labels(range 1 thru 11);
+
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Fork}
+%    \begin{macrocode}
+%% fork symbol
+"Fork";
+beginchar(8,2u#,10u#,0);
+  pickup normalpen;
+
+  b:=0.8u;  % Breite des Stiels
+  zb:=0.2u; % Zackenbreite
+  za=0.4u;  % Zackenabstand
+  z1=(w/2+b/2, 0u);
+  x2=x1-b; y2=y1;
+  x3=x2; y3=y2+6u;
+  x4=x1; y4=y3;
+  
+  fill z1--z2--z3--z4--cycle;
+  
+  x5=x3-(4*zb+3*za)/2 +b/2;
+  y5=y3+1.9u;
+  x6=x5; y6=y5+2.1u;
+  x7=x6+zb; y7=y6;
+  x8=x7; y8=y5;
+  
+  x9=x8+za; y9=y8;
+  x10=x9; y10=y6;
+  x11=x10+zb; y11=y10;
+  x12=x11; y12=y9;
+  
+  x13=x12+za; y13=y12;
+  x14=x13; y14=y6;
+  x15=x14+zb; y15=y14;
+  x16=x15; y16=y5;
+  
+  x17=x16+za; y17=y16;
+  x18=x17; y18=y6;
+  x19=x18+zb; y19=y18;
+  x20=x19; y20=y5; 
+  
+  fill z3{dir 130}..z5{up}--z6--z7--z8--z9--z10--z11--z12--z13--z14--z15--z16--z17--z18--z19--z20{down}..z4{dir 230}..cycle;
+  
+  %labels(range 1 thru 20);
+
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Spoon}
+%    \begin{macrocode}
+%% spoon symbol
+"Spoon";
+beginchar(9, 3.4u#, 10u#,0);
+  pickup normalpen;
+
+  b:=0.8u;  % Breite des Stiels
+  % Stiel
+  z1=(w/2+b/2, 0u);
+  x2=x1-b; y2=y1;
+  x3=x2; y3=y2+5.74u;
+  x4=x1; y4=y3;
+  
+  fill z1--z2--z3--z4--cycle;
+  
+  % Oberteil
+  x5=x3-1.0u;
+  x6=x4+(x3-x5);
+  y5=y6=y3+(y7-y3)/2 - 0.2u; % halbe Breite
+  z7=(x3+(x4-x3)/2, y3+4u); % y: maximale Ausdehnung
+  
+  draw z7{dir -170}..z5{down}..(x3+(x4-x3)/2, y3){dir -10};
+  draw (x3+(x4-x3)/2, y3){dir 10}..z6{up}..z7{dir 170};%..(z7-(b/2, 0));
+  %draw z3{dir 150}..z5{up}..z7{right}; umdrehen!
+  %draw z7{right}..z6{down}..z4{dir -150}..z3;
+  %draw z3{dir 170}..z5{dir 75}..z7{right}..z6{dir -75}..z4{dir -170}..z3;
+  
+  %labels(range 1 thru 12);
+endchar;
+
+%    \end{macrocode}
+%
+% \subsubsection{Gloves}
+%    \begin{macrocode}
+%% gloves symbol
+"Gloves";
+beginchar(10,10.4u#,10u#,0);
+  pickup thinpen;
+
+  a:=1.05; % Skalierungsfaktor
+  breite:=a*4.3u; % Breite unten am Handschuh
+  hoehe:=a*1.8u;
+  
+  z5=a*(3.3u-0.4u, 3u); % Rotationspunkt 1. Handschuh
+  z9=z5 + a*(-0.55u, 0.1u); % Rotationspunkt 2. Handschuh
+  alpha:=-37; % Rotationswinkel -37
+  beta:=-26;  % Verschiebung des zweiten Handschuhs bzgl. des oberen
+  
+  % Oberer Handschuh
+  z4=(0.8u, 1u);
+  x1=x4; x2=x3;
+  y1=y2; y3=y4;
+  x2-x1=breite;
+  y1-y4=hoehe;
+  
+  fill z1--z2--z3--z4--cycle rotatedaround(z5, alpha);
+  
+  % Daumen
+  z7=z1 + a*(0.5thinpen.w+0.2u, 3.5u);
+  z6=z7 + a*(-1.2u, 1.3u);
+  
+  draw ((z1+(0.5thinpen.w,0)){up}..z6{dir 75}..z7{dir -80}) rotatedaround(z5, alpha);
+  
+  % Oberer Rand/Begrenzung
+  z8=z1 + ((x2-x1)/2 + a*0.2u, a*8.2u);
+  
+  draw (z7{dir 90}..z8{right}..(z2+(-0.5thinpen.w,0)){dir -90}) rotatedaround(z5, alpha);
+  
+  
+  
+  % Zweiter Handschuh
+  fill z1--(z1-(-a*0.8u, (y1-y4)/2+a*0.6u))--z4--cycle rotatedaround(z9, alpha+beta);
+
+  fill z4--z2--z3--cycle rotatedaround(z9, alpha+beta);
+  
+  %z10=z1 + a*(1u, 7.55u); % Schnittpunkt der beiden Handschuhe
+  z10=z1 + a*(1u, 7.75u);
+  
+  draw (z10..z8{right}..z2{dir -90}) rotatedaround(z9, alpha+beta);
+  
+  
+  
+  % 'Weißer' Trennstrich
+  z11=z3 - (0, 0.5thinpen.w);
+  x12=x1; y12=y11;
+  unfill (z4--z3--z11--z12--cycle) rotatedaround(z5, alpha);
+  
+  
+  %labels(range 1 thru 20);
+endchar;
+
+end
+%</mf>
+%    \end{macrocode}
+%
+% \Finale
+\endinput
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins
new file mode 100644
index 00000000000..0dc0cbafb47
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cookingsymbols/cookingsymbols.ins
@@ -0,0 +1,62 @@
+  %% --------------------- cookingsymbols.ins -------------------------
+
+
+\def\filedate{2011/11/02}
+\def\batchfile{cookingsymbols.ins}
+
+\input docstrip
+\ifx\generate\undefined
+  \obeyspaces
+  \Msg{************************************************}
+  \Msg{*                                              *}
+  \Msg{* This installation requires docstrip          *}
+  \Msg{* version 2.4 or later.                        *}
+  \Msg{*                                              *}
+  \Msg{* An older version of docstrip has been input. *}
+  \Msg{*                                              *}
+  \Msg{************************************************}
+  \errhelp{Move or rename old docstrip.tex and get a newer one.}
+  \errmessage{Old docstrip in input path}
+  \batchmode
+  \csname @@end\endcsname\end
+\fi
+
+\keepsilent
+\askforoverwritefalse
+
+\preamble
+
+This is a generated file.
+Copyright (C) 2011 by Sven Harder
+
+This file may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.3 of this license or (at your option) any later
+version. The latest version of this license is in:
+
+http://www.latex-project.org/lppl.txt
+
+and version 1.3 or later is part of all distributions of
+LaTeX version 2005/12/01 or later.
+\endpreamble
+
+\declarepostamble\mfpostamble
+\endpostamble
+
+\generate
+{%
+    \file{cookingsymbols.sty}{\from{cookingsymbols.dtx}{package}}
+	\usepostamble\mfpostamble
+    \file{cookingsymbols.mf}{\from{cookingsymbols.dtx}{mf}}
+}
+  \obeyspaces
+  \Msg{**********************************************************************}
+  \Msg{*                                                                    *}
+  \Msg{*   To finish the installation you have to copy the file             *}
+  \Msg{*                                                                    *}
+  \Msg{*   *.sty and *.mf into a directory in the search path by TeX        *}
+  \Msg{*                                                                    *}
+  \Msg{**********************************************************************}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\endinput