summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Master/texmf-dist/doc/generic/minifp/README9
-rw-r--r--Master/texmf-dist/doc/generic/minifp/minifp.pdfbin418427 -> 419173 bytes
-rw-r--r--Master/texmf-dist/doc/generic/minifp/test1.tex19
-rw-r--r--Master/texmf-dist/source/generic/minifp/minifp.dtx385
-rw-r--r--Master/texmf-dist/tex/generic/minifp/mfpextra.tex45
-rw-r--r--Master/texmf-dist/tex/generic/minifp/minifp.sty8
6 files changed, 249 insertions, 217 deletions
diff --git a/Master/texmf-dist/doc/generic/minifp/README b/Master/texmf-dist/doc/generic/minifp/README
index f6b413bf9ee..eec67f09a9e 100644
--- a/Master/texmf-dist/doc/generic/minifp/README
+++ b/Master/texmf-dist/doc/generic/minifp/README
@@ -13,7 +13,7 @@ Purpose:
Minifp should work in both latex and plaintex.
- This is version 0.9. It should work reasonably well, barring any bugs,
+ This is version 0.92. It should work reasonably well, barring any bugs,
but I expect to spend some time fine-tuning it for version 1.0.
License:
@@ -79,12 +79,13 @@ Manifest:
This distribution, the latest updates, and possibly some past
versions, should also be available at my web site:
- <http://comp.uark.edu/~luecking/tex/>.
+ <http://comp.uark.edu/~luecking/tex/tex.html>.
History:
- Version 0.9 : maximum possible accuracy achieved for angle, at some
- cost to speed.
+ Version 0.92 : Bugfixes: correct sign of floor and ceiling. Correct
+ occasional minus sign in front of 0 for sin or cos.
+ Version 0.9 : angle: near maximum accuracy, at some cost to speed.
Version 0.8 : exp: now more accurate for many cases.
Version 0.7 : sqrt: now exact when possible and much more accurate.
Version 0.6 : Added angle to mfpextra. Changed package name to minifp.
diff --git a/Master/texmf-dist/doc/generic/minifp/minifp.pdf b/Master/texmf-dist/doc/generic/minifp/minifp.pdf
index 94d43d6488f..baca0c62f24 100644
--- a/Master/texmf-dist/doc/generic/minifp/minifp.pdf
+++ b/Master/texmf-dist/doc/generic/minifp/minifp.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/generic/minifp/test1.tex b/Master/texmf-dist/doc/generic/minifp/test1.tex
index 024e5c5a44d..c08127eb8b9 100644
--- a/Master/texmf-dist/doc/generic/minifp/test1.tex
+++ b/Master/texmf-dist/doc/generic/minifp/test1.tex
@@ -80,16 +80,16 @@ Exponential:\Rexp\y
Back to $21.34$:\Rpop\X\Rpush{21.34}\y
Square:\Rsq\y
\Rpop\X\Rpush{21.34}%
-\tracingmacros1
Inversion:\Rinv\y
-\tracingmacros0
\Rpop\X\Rpush{21.34}%
+\tracingmacros1
Floor:\Rfloor\y
+\tracingmacros0
\Rpop\X\Rpush{21.34}%
Ceiling:\Rceil\y
\Rpop\X\Rpush{21.34}%
Square root:\Rsqrt\y
-Now put $21.34$ and $12.34$ in that order:\Rpop\X\Rpush{21.34}\Rpush{12.34}\y
+Now push $21.34$ and $12.34$ in that order:\Rpop\X\Rpush{21.34}\Rpush{12.34}\y
Compare: \Rcmp
21.34 is\IFlt{}{ not} less than 12.34.
21.34 is\IFgt{}{ not} more than 12.34.
@@ -404,7 +404,16 @@ negative:^^J}
Square root of $8$:\MFPsqrt{8}\Z\w
Square root of $9$:\MFPsqrt{9}\Z\w
Square root of $10$:\MFPsqrt{10}\Z\w
- Square root of $1524157.65279684$ (should be exact):\MFPsqrt{1524157.65279684}\Z\w
+ Square root of $99$:\MFPsqrt{99}\Z\w
+ Square root of $500$:\MFPsqrt{500}\Z\w
+ Square root of $1000$:\MFPsqrt{1000}\Z\w
+ Square root of $5000$:\MFPsqrt{5000}\Z\w
+ Square root of $9999$:\MFPsqrt{9999}\Z\w
+Square root of $100000$:\MFPsqrt{100000}\Z\w
+Square root of $100000$:\MFPsqrt{100000}\Z\w
+Square root of $1500000$:\MFPsqrt{1500000}\Z\w
+Square root of $1524157.65279684$ (should be exact):\MFPsqrt{1524157.65279684}\Z\w
+Square root of $15000000$:\MFPsqrt{15000000}\Z\w
Square root of $99999998.00000001$ (should be exact):\MFPsqrt{99999998.00000001}\Z\w
Square root of $9999.99$:\MFPsqrt{9999.99}\Z\w
Square root of $9999.999 999$:\MFPsqrt{9999.999999}\Z\W
@@ -418,7 +427,7 @@ Subtract $Y-X$:\MFPsub\Y\X\Z\w
Subtract $X-X$:\MFPsub\X\X\Z\w
Subtract $Y-Y$:\MFPsub\Y\Y\Z\w
Multiply:\MFPmul\X\Y\Z\w
-Multiply $10^4\times10^4$:\MFPmul{10000}{10000}\Z\w
+Multiply $10^{4}\times10^4$ (loses the overflow digit):\MFPmul{10000}{10000}\Z\w
Divide $X/Y$:\MFPdiv\X\Y\Z\w
Divide $Y/X$:\MFPdiv\Y\X\Z\w
Max:\MFPmax\X\Y\Z\w
diff --git a/Master/texmf-dist/source/generic/minifp/minifp.dtx b/Master/texmf-dist/source/generic/minifp/minifp.dtx
index 3c3ff629144..77f56099f70 100644
--- a/Master/texmf-dist/source/generic/minifp/minifp.dtx
+++ b/Master/texmf-dist/source/generic/minifp/minifp.dtx
@@ -13,8 +13,8 @@
% minifp has maintenance status "author-maintained". The Current Maintainer
% is Daniel H. Luecking. The Base Interpreter is TeX (plain TeX or LaTeX).
%<*driver|sty>
-\def\MFPfiledate{2013/01/01}%
-\def\MFPfileversion{0.9}%
+\def\MFPfiledate{2013/02/01}%
+\def\MFPfileversion{0.92}%
%</driver|sty>
%
%<*driver>
@@ -102,7 +102,7 @@
\end{document}
%</driver>
%\fi
-% \CheckSum{3325}
+% \CheckSum{3339}
% \CharacterTable
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
@@ -136,22 +136,22 @@
% In working on an application that needed to be able to automatically
% generate numeric labels on the axes of a graph, I needed to be able
% to make simple calculations with real numbers. What \TeX{} provides is
-% far to limited. In fact, its only native user-level support for real
+% far too limited. In fact, its only native user-level support for real
% numbers is as factors for dimensions. For example one can ``multiply''
% $3.1\times 0.2$ by \verb$\dimen0=0.2pt \dimen0=3.1\dimen0 $.
%
-% Unfortunately \TeX{} stores dimensions as integer multiples of of the
+% Unfortunately \TeX{} stores dimensions as integer multiples of the
% ``scaled point'' (\dim{sp}) with \dim{sp}${}=2^{-16}$\dim{pt}, and
% therefore \dim{.2pt} is approximated by $\frac{13107}{65536}$, which is
% not exact. Then mutiplying by $3.1$ produces $\frac{40631}{65536}$. If
-% we ask for 5 digit accuracy, this produces $0.61998$\dim{pt} and not the
+% we ask for five digit accuracy, this produces $0.61998$\dim{pt} and not the
% exact value $0.62$. This is sufficiently accurate for positioning
% elements on a page, but not for displaying automatically computed axis
-% labels if 5 digit accuracy is needed.
+% labels if five digit accuracy is needed.
%
% The \mfp{} package was written to provide the necessary calculations
% with the necessary accuracy for this application. The implementation
-% would have been an order of magnitude smaller and faster if only 4 digit
+% would have been an order of magnitude smaller and faster if only four digit
% accuracy were provided (and I may eventually do that for the application
% under consideration), but I have decided to clean up what I have
% produced and release it as is. The full \mfp{} package provides nearly
@@ -161,8 +161,8 @@
% the \prog{mfpic} drawing package.
%
% I decided on eight digits on both sides of the decimal point essentially
-% because I wanted at least 5 digits and the design I chose made multiples
-% of 4 the easiest to work with.
+% because I wanted at least five digits and the design I chose made multiples
+% of four the easiest to work with.
%
% \Mfp{} also provides a simple stack-based language for writing assembly
% language-like programs. Originally, this was to be the native
@@ -186,14 +186,14 @@
% Another simplification: multiplication has to be done by breaking the
% number into parts. \TeX{} can multiply any two 4-digit integers without
% overflow, but it cannot multiply most pairs of 5-digit integers. Two
-% 8-digit numbers conveniently break ito four 4-digit parts. To get even
+% 8-digit numbers conveniently break into four 4-digit parts. To get even
% nine digits of accuracy would require six parts (five, if we don't
% insist on a separation occuring at the decimal point). The complexity of
% the multiplication process goes up as the square of the number of parts,
% so six parts would more than double the complexity.
%
-% A final simplification: \TeX{} places a limit of 9 on the number of
-% arguments a macro can have. Quite often the last argument is needed
+% A final simplification: \TeX{} places a limit of nine on the number of
+% arguments a macro can have. Quite often the last argument is needed to
% clear out unused text to be discarded. Thus, a string of eight digits
% can quite often be processed with one execution of one nine-argument
% macro.
@@ -208,7 +208,7 @@
% Multiplication is carried out internally to an exact 16-digit answer,
% which is then rounded to an 8-digit result. Overflow (more than 8
% digits in the integer part) is discarded. Division is internally
-% carried to 9 digits after the decimal, which is then also rounded to
+% carried to nine digits after the decimal, which is then also rounded to
% an 8-digit result.
%
% We supply two kinds of operations in this package. There are stack-based
@@ -239,10 +239,10 @@
% in the same way. The internal commands will thus have a standard form to
% operate on. All results are returned in standard form.
%
-% The standard form referred to above is an integer part (1 to 8 digits
+% The standard form referred to above is an integer part (one to eight digits
% with no unnecessary leading zeros nor unnecessary sign) followed by the
% decimal point (always a dot, which is ASCII \number`\.), followed by exactly
-% 8 digits, all of this preceded by a minus sign if the number is
+% eight digits, all of this preceded by a minus sign if the number is
% negative. Thus, $-{-0.25}$ would be processed and stored as
% ``\texttt{0.25000000}'' and $-.333333$ as ``\texttt{-0.33333300}''.
%
@@ -293,7 +293,7 @@
% \Rpush{3.4}
% \Radd
% \Rpop\X \end{verbatim}
-% which would push first \texttt{1.20000000} then \texttt{3.40000000} onto
+% which would \op{push} first \texttt{1.20000000} then \texttt{3.40000000} onto
% the stack, then replace them with \texttt{4.60000000}, then remove that
% and store it in \verb$\X$. Clearly the stack is intended for
% calculations that produce a lot of intermediate values and only the
@@ -318,8 +318,8 @@
% \meta{num} can be any decimal real number with at most 8
% digits on each side of the decimal point, or they can be macros that
% contain such a number. If the decimal dot is absent, the fractional part
-% will be taken to be 0, if the integer part or the fractional part is
-% absent, it will be taken to be 0. (One consequence of these rules is
+% will be taken to be $0$, if the integer part or the fractional part is
+% absent, it will be taken to be $0$. (One consequence of these rules is
% that all the following arguments produce the same internal
% representation of zero: \marg{0.0}, \marg{0.}, \marg{.0},
% \marg{0}, \marg{.}, and \marg{}\,.) Spaces may appear anywhere in the
@@ -389,12 +389,12 @@
% \SpecialUsageIndex{\MFPint}^^A
% \cs{MFPint}\mmarg{num}\cs{macro}&
% Replaces the part of \meta{num} after the decimal point with zeros
-% (keeps the sign unless the result is zero) and stores the result in
+% (keeps the sign unless the result is $0$) and stores the result in
% \cs{macro}.\\
% \SpecialUsageIndex{\MFPfrac}^^A
% \cs{MFPfrac}\mmarg{num}\cs{macro}&
-% Replaces the part of \meta{num} before the decimal point with zero
-% (keeps the sign unless the result is zero) and stores the result in
+% Replaces the part of \meta{num} before the decimal point with $0$
+% (keeps the sign unless the result is $0$) and stores the result in
% \cs{macro}.\\
% \SpecialUsageIndex{\MFPfloor}^^A
% \cs{MFPfloor}\mmarg{num}\cs{macro}&
@@ -432,7 +432,7 @@
% The command \cs{MFPzero} is useful for ``macro programs''. If you want
% to do something to a number depending on the outcome of a test, you may
% occasionally want to simply absorbed the number and output a default
-% result. (There are more efficient ways to simply store 0 in a macro.)
+% result. (There are more efficient ways to simply store $0$ in a macro.)
%
% Note that one could easily double, halve, square, increment,
% decrement or invert a \meta{num} using the binary versions of
@@ -502,10 +502,10 @@
% \medskip
% Issuing \verb$\MFPchk{\X}$ will check the sign of the number stored in
% the macro \cs{X}. Then \verb$\IFneg{A}{B}$ will produce `\verb$A$' if it
-% is negative and `\verb$B$' if it is 0 or positive. Similarly,
+% is negative and `\verb$B$' if it is $0$ or positive. Similarly,
% \verb$\MFPcmp{\X}{1}$ will compare the number stored in \cs{X} to $1$.
% Afterward, \verb$\IFlt{A}{B}$ will produce `\verb$A$' if \cs{X} is less
-% than $1$ and `\verb$B$' if \cs{X} is equal to or greater than 1.
+% than $1$ and `\verb$B$' if \cs{X} is equal to or greater than $1$.
%
% If users finds it tiresome to type two separate commands, they can
% easily define a single command that both checks a value and runs
@@ -584,8 +584,8 @@
% for the absolute values. The processing will remove redundant signs
% along with redundant leading zeros: \verb$\MFPtruncate{-3}{-+123.456}$
% will produce \texttt{0}. The rounding rule is as follows: round up if
-% the digit to the right of the rounding point is 5 or more, round down if
-% the digit is 4 or less.
+% the digit to the right of the rounding point is $5$ or more, round down if
+% the digit is $4$ or less.
%
%
% \subsection{Stack-based macros}\label{stack}
@@ -608,7 +608,7 @@
% and define the given macro to have that number as its definition.
%
% All the binary operations remove the last two numbers from the stack,
-% operate on them in the order they were put on the stack, and push the
+% operate on them in the order they were put on the stack, and \op{push} the
% result on the stack. Thus the program
% \begin{verbatim}
% \Rpush{1.2}
@@ -683,13 +683,13 @@
% Obtains the reciprocal. Slightly more efficient than the equivalent
% division.\\
% \SpecialUsageIndex{\Rincr}\cs{Rincr}&
-% Increases by 1. Slightly more efficient than the equivalent
+% Increases by $1$. Slightly more efficient than the equivalent
% addition.\\
% \SpecialUsageIndex{\Rdecr}\cs{Rdecr}&
-% Decreases by 1. Slightly more efficient than the equivalent
+% Decreases by $1$. Slightly more efficient than the equivalent
% subtraction.\\
% \SpecialUsageIndex{\Rzero}\cs{Rzero}&
-% Replaces the number with zero. Slightly more convenient than the
+% Replaces the number with $0$. Slightly more convenient than the
% equivalent \cs{Rpop}\cs{X} followed by a \cs{Rpush}\marg{0}.\\
% \end{tabular}}
%
@@ -808,12 +808,12 @@
%
% \subsection{Errors}
%
-% If one tries to pop from an empty stack, an error message will be
+% If one tries to \op{pop}from an empty stack, an error message will be
% issued. Ignoring the error causes the macro to have the value stored
% in the macro \SpecialUsageIndex{\EndofStack}\verb$\EndofStack$.
% Its default is \texttt{0.00000000}.
%
-% If one tries to divide by zero, an error message will be issued.
+% If one tries to divide by $0$, an error message will be issued.
% Ignoring the error causes the result to be one of the following:
% \begin{itemize}
% \item Dividing $0$ by $0$ gives a result whose integer part is stored
@@ -1020,7 +1020,7 @@
% I have been lax at making sure \cs{MFP@z@Ovr} is properly initiallized
% and properly checked whenever it could be relevant, and properly
% passed on. I think every internal command \cs{MFP@R}\textit{xxx}
-% should ensure it starts being 0 and ends with a numerical value. I
+% should ensure it starts being $0$ and ends with a numerical value. I
% notice that division might make it empty.
%
% \cs{MFP@subroutine} executes its argument (typically a single command) with
@@ -1052,7 +1052,7 @@
%
% \DescribeMacro{\EndofStack}
% We define here the error messages: popping from an empty stack and
-% dividing by zero. In addition to the error messages, we provide some
+% dividing by $0$. In addition to the error messages, we provide some
% default values that hopefully allow some operations to continue.
%
% We also have a warning or two.
@@ -1065,7 +1065,7 @@
\errmessage{MiniFP error: #1}%
\endgroup}%
\def\MFP@popempty@err{%
- \MFP@errmsg{cannot pop from an empty stack}%
+ \MFP@errmsg{cannot POP from an empty stack}%
{There were no items on the stack for the POP operation. %
If you continue, ^^Jthe macro will contain the %
value \EndofStack.}}%
@@ -1087,7 +1087,7 @@
% \DescribeMacro{\MaxRealInt}These are the largest possible integer and
% fractional parts of a real
% \DescribeMacro{\MaxRealFrac}number. They are returned for division by
-% zero, for logarithm of 0, and when overflow is detected in the
+% $0$, for logarithm of $0$, and when overflow is detected in the
% exponential function.
% \begin{macrocode}
\def\MaxRealInt {99999999}%
@@ -1096,11 +1096,11 @@
%
% \SpecialUsageIndex{\MaxRealInt}
% \SpecialUsageIndex{\MaxRealFrac}
-% These are the results returned when trying to divide by zero. Two are
+% These are the results returned when trying to divide by $0$. Two are
% \DescribeMacro{\xOverZeroInt}
% \DescribeMacro{\xOverZeroFrac}
-% used when dividing a nonzero number by zero and and two when trying to
-% divide zero by zero.
+% used when dividing a nonzero number by $0$ and and two when trying to
+% divide $0$ by $0$.
% \DescribeMacro{\ZeroOverZeroInt}
% \DescribeMacro{\ZeroOverZeroFrac}
% \begin{macrocode}
@@ -1111,8 +1111,8 @@
% \end{macrocode}
%
% These macros strip the spaces, process a number into sign, integer and
-% fractional parts, and pad the fractional part out to 8 decimals. They
-% are used in PUSH so that the stack will only contains reals in a
+% fractional parts, and pad the fractional part out to eight decimals. They
+% are used in \op{push} so that the stack will only contains reals in a
% normalized form. Some of them are also used to preprocess the reals in
% the operand versions of commands
%
@@ -1120,7 +1120,7 @@
% stored in \cs{MFP@*@Sgn} as $-1$, $0$ or $1$.
%
% We strip the spaces and pad the fractional parts separately because
-% they are unnecessary when processing POPed reals (though they wouldn't
+% they are unnecessary when processing \op{pop}ed reals (though they wouldn't
% hurt).
%
% The number to be parsed is \arg4 and the macros to contain the parts
@@ -1152,14 +1152,14 @@
\@xp\MFPsplit@dot#1..\mfp@end #3#4%
% \end{macrocode}
%
-% This is the first place where having at most 8 digits simplifies things.
+% This is the first place where having at most eight digits simplifies things.
% At this point \arg3 could contain any number of consecutive signs
-% followed by any 8 digits. It could be zero, so to avoid losing the sign
-% we append a \texttt{1} (for up to 9 digits). We temporarily define the
+% followed by any eight digits. It could be $0$, so to avoid losing the sign
+% we append a \texttt{1} (for up to nine digits). We temporarily define the
% sign based on the result, but may need to drop it if both the integer
-% and fractional parts are zero.
+% and fractional parts are $0$.
%
-% Prepending a zero to the fractional part pemits it to be empty.
+% Prepending a 0 to the fractional part permits it to be empty.
% In the final \cs{edef}, \arg3 is made positive.
% \begin{macrocode}
\ifnum#31<0
@@ -1183,7 +1183,7 @@
% \end{macrocode}
%
% This is used to pad the fractional part to eight places with zeros. If
-% a number with more than 8 digits survives to this point, it gets
+% a number with more than eight digits survives to this point, it gets
% truncated.
% \begin{macrocode}
\def\MFPpadto@eight#1{%
@@ -1191,7 +1191,7 @@
% \end{macrocode}
%
% These take operands off the stack. We know already that there are no
-% spaces and that the fractional part has 8 digits.
+% spaces and that the fractional part has eight digits.
% \begin{macrocode}
\def\MFPgetoperand@x{\Rpop\MFP@x@Val
\MFPprocess@into@parts\MFP@x@Val\MFP@x@Sgn\MFP@x@Int\MFP@x@Frc}%
@@ -1225,8 +1225,8 @@
\def\MFPpush@result{\MFP@Rchk\MFPcurr@Sgn\MFP@Rcat\MFP@z@Val}%
% \end{macrocode}
%
-% When POP encounters an empty stack it gobbles the code that would
-% perform the pop (\arg1) and defines the macro (\arg2) to contain
+% When \op{pop} encounters an empty stack it gobbles the code that would
+% perform the \op{pop} (\arg1) and defines the macro (\arg2) to contain
% \cs{EndofStack}. The default meaning for this macro is $0$.
% \begin{macrocode}
\def\if@EndofStack{%
@@ -1238,7 +1238,7 @@
% \end{macrocode}
%
% The macro \cs{Rpop} calls \cs{MFP@popit} followed by the contents of the
-% stack, the token \cs{mfp@end} and the macro to pop into. If the stack is
+% stack, the token \cs{mfp@end} and the macro to \op{pop} into. If the stack is
% not empty, \cs{doMFP@popit} will read the first group \arg1 into that macro
% \arg3, and then redefine the stack to be the rest of the argument \arg2.
% If the stack is empty, \cs{doMFP@EOS} will equate the macro to
@@ -1365,7 +1365,7 @@
% \item[cmp] compare $x$ and $y$ (stack version does not change stack).
% \item[chk] examine the sign of $x$ (stack version does not change stack).
% \item[dup] stack only, duplicate the top element of the stack.
-% \item[push] stack only, push a value onto the stack.
+% \item[push] stack only, put a value on top of the stack.
% \item[pop] stack only, remove the top element of the stack,
% store it in a variable.
% \item[exch] stack only, exchange top two elements of the stack.
@@ -1561,7 +1561,7 @@
%
% These are the wrappers for binary operations. The top level definitions
% are almost identical to those of the unary operations. The only difference
-% is they pop or parse two operands.
+% is they \op{pop} or parse two operands.
% \begin{macrocode}
\def\MFP@stack@Binary#1{%
\MFPgetoperand@y \MFPgetoperand@x
@@ -1589,12 +1589,12 @@
% \end{macrocode}
%
% The doubling and halving operations are more efficient ways to
-% multiply or divide a number by 2. For doubling, copy $x$ to $y$
+% multiply or divide a number by $2$. For doubling, copy $x$ to $y$
% and add. For halving, we use basic \TeX{} integer division, more
% efficient than multiplying by $0.5$ and far more than using
% \cs{MFP@Rdiv}.
%
-% In \cs{MFP@Rhalve}. we add 1 to the fractional part for rounding
+% In \cs{MFP@Rhalve}. we add $1$ to the fractional part for rounding
% purposes, and we move any odd 1 from the end of the integer part to the
% start of the fractional part.
% \begin{macrocode}
@@ -1629,7 +1629,7 @@
% \end{macrocode}
%
% The inversion operation just calls \cs{MFP@Rdiv} after copying $x$ to
-% $y$ and 1 to $x$.
+% $y$ and $1$ to $x$.
% \begin{macrocode}
\def\MFP@Rinv{\MFP@Rcopy xy\MFP@Rload x110\MFP@Rdiv}%
% \end{macrocode}
@@ -1640,13 +1640,13 @@
\MFP@Rloadz {\ifnum\MFP@x@Int=0 0\else\MFP@x@Sgn\fi}\MFP@x@Int 0}%
% \end{macrocode}
%
-% Fractional part: replace integer part with a zero.
+% Fractional part: replace integer part with a $0$.
% \begin{macrocode}
\def\MFP@Rfrac{%
\MFP@Rloadz {\ifnum\MFP@x@Frc=0 0\else\MFP@x@Sgn\fi}0\MFP@x@Frc}%
% \end{macrocode}
%
-% To increment and decrement by 1, except in border cases, we need only
+% To increment and decrement by $1$, except in border cases, we need only
% address the integer part of a number. This doesn't seem so simple
% written out but, even so, it is more efficient than full-blown addition.
% It would be very slightly more efficient to repeat the increment code in
@@ -1693,7 +1693,7 @@
\advance\MFP@tempa1
\fi
\fi
- \MFP@Rloadz{\ifnum\MFP@z@Int=0 0\else\MFP@x@Sgn\fi}\MFP@tempa0}%
+ \MFP@Rloadz{\ifnum\MFP@x@Int=0 0\else\MFP@x@Sgn\fi}\MFP@tempa0}%
\def\MFP@Rfloor{\MFP@Rfloororceil>}%
\def\MFP@Rceil {\MFP@Rfloororceil<}%
% \end{macrocode}
@@ -1726,14 +1726,14 @@
% \end{macrocode}
%
% We will store the intermediate and final products in \cs{MFP@z@*}. Each one
-% is ultimately reduced to 4 digits, like the parts of $x$ and $y$. As each
+% is ultimately reduced to four digits, like the parts of $x$ and $y$. As each
% base-$10000$ digit of $y$ is multiplied by a digit of $x$, we add the
% result to the appropriate digit of the partial result $z$. Thus, we need
% to zero out $z$ at the start (or treat the first iteration differently):
%
% The underflow ends up in \cs{MFP@z@Frc@iv} and \cs{MFP@z@Frc@iii}.
% Overflow will be in \cs{MFP@z@Int@iii}. Unlike the rest, it can be up to
-% 8 digits because we do not need to carry results out of it.
+% eight digits because we do not need to carry results out of it.
% \begin{macrocode}
\def\MFPmore@init@z{%
\def\MFP@z@Frc@iv {0}%
@@ -1940,7 +1940,7 @@
% \end{macrocode}
%
% \cs{MFP@Rmul} first computes the (theoretical) sign of the product: if
-% zero return 0, otherwise provisionally set the sign of the product and
+% $0$, return $0$, otherwise provisionally set the sign of the product and
% call \cs{MFP@@Rmul}.
% \begin{macrocode}
\def\MFP@Rmul{%
@@ -1955,9 +1955,9 @@
%
% \cs{MFP@@Rmul} splits the four expected macros into eight macros
% considered to be four base-10000 digits for each of $x$ and $y$.
-% Then each digit of $y$ is used to multiply the 4 digits of $x$ and the
+% Then each digit of $y$ is used to multiply the four digits of $x$ and the
% results are added to corresponding digits of $z$, which have been
-% initialized to 0 by \cs{MFPmore@init@z}.
+% initialized to $0$ by \cs{MFPmore@init@z}.
% \begin{macrocode}
\def\MFP@@Rmul{%
\MFPmore@init@z
@@ -1991,13 +1991,13 @@
\MFP@carrym\MFP@z@Int@i \MFP@z@Int@ii
\MFP@carrym\MFP@z@Int@ii\MFP@z@Int@iii
% \end{macrocode}
-% To end, we arrange for all macros to hold 4 digits (except
+% To end, we arrange for all macros to hold four digits (except
% \cs{MFP@z@Int@ii} which doesn't need leading 0s, and \cs{MFP@z@Int@iii}
% which also doesn't) and load them into the appropriate 8-digit macros.
% The underflow digits are stored in \cs{MFP@z@Und} in case we ever need
% to examine them, and the overflow in \cs{MFP@z@Ovr} in case we ever need
% to implement an overflow error. Theoretically $z \ne 0$, but it is
-% possible that $z=0$ after rounding to 8 places. If so, we must reset
+% possible that $z=0$ after rounding to eight places. If so, we must reset
% \cs{MFP@z@Sgn}.
% \begin{macrocode}
\makeMFP@fourdigits\MFP@z@Frc@iv
@@ -2019,9 +2019,9 @@
% For division, we will obtain the result one digit at a time until the
% $9$th digit after the decimal is found. That $9$th will be used to round
% to eight digits (and stored as underflow). We normalize the denominator
-% by shifting left until the integer part is 8 digits. We do the same for
-% the numerator. The integer quotient of the integer parts will be 1 digit
-% (possibly 0). If the denominator is shifted $d$ digits left and the
+% by shifting left until the integer part is eight digits. We do the same for
+% the numerator. The integer quotient of the integer parts will be one digit
+% (possibly a 0). If the denominator is shifted $d$ digits left and the
% numerator $n$ digits left, the quotient will have to be shifted $n-d$
% places right or $d-n$ places left. Since the result is supposed to have
% $9$ digits after the dot, our quotient needs $9+d-n+1$ total digits.
@@ -2031,7 +2031,7 @@
% only $16$ significant digits should be retained in any case.) If $d$ is
% $0$ and $n$ is $15$ we would need $-5$ digits. That means the first
% nonzero digit is in the 15th or 16th place after the dot and the
-% quotient is effectively 0.
+% quotient is effectively $0$.
%
% Here I explain why we normalize the parts in this way. If a numerator
% has the form $n_1.n_2$ and the denominator has the form $d_1.d_2$ then
@@ -2041,9 +2041,9 @@
% however is the largest integer $q$ such that $q(d_1.d_2) \le n_1.n_2$.
% It can easily be shown that $q \le q_1$. It is true, but not so easily
% shown, that $q \ge q_1 - 1$. This is only true if $d_1$ is large enough,
-% in our case it has to be at least 5 digits. Thus we only have to do one
+% in our case it has to be at least five digits. Thus we only have to do one
% simple division and decide if we need to reduce the quotient by one. If
-% we arrange for $d_1$ to have 8 digits, then $q_1$ will be one digit and
+% we arrange for $d_1$ to have eight digits, then $q_1$ will be one digit and
% the test for whether we need to reduce it becomes easier.
%
% This test is done as follows. The first trial quotient, $q_1$, will work
@@ -2069,14 +2069,14 @@
%
% Now I need to get it organized. \cs{MFP@Rdiv} will have \cs{MFP@x@*} and
% \cs{MFP@y@*} available. One step (could be first or last). Is to calculate
-% the sign. Let's do it first (because we need to check for 0 anyway).
+% the sign. Let's do it first (because we need to check for $0$ anyway).
%
-% We invoke an error message upon division by 0, but nevertheless return
-% a value. By default they are $0$ for $0/0$ and the maximum possible real
-% for $x/0$ when $x$ is not zero. If the numerator is 0 and the
-% denominator not, we do nothing as $z$ was initialized to be 0.
+% We invoke an error message upon division by $0$, but nevertheless return
+% a value. By default it is $0$ for $0/0$ and the maximum possible real
+% for $x/0$ when $x$ is not $0$. If the numerator is $0$ and the
+% denominator not, we do nothing as $z$ was initialized to be $0$.
%
-% If neither is 0, we calculate the sign of the result and call
+% If neither is $0$, we calculate the sign of the result and call
% \cs{MFP@@Rdiv} to divide the absolute values.
% \begin{macrocode}
\def\MFP@Rdiv{%
@@ -2106,7 +2106,7 @@
% but knowing the shift will give us the correct quotient in the end.
%
% We first arrange that \cs{MFP@y@Int} is nonzero by making it \cs{MFP@y@Frc} if
-% it is zero (a shift of eight digits). Then the macro
+% it is $0$ (a shift of eight digits). Then the macro
% \cs{MFP@numdigits@toshift} computes $8$ minus the number of digits in
% \cs{MFP@y@Int}, which is how many positions left $y$ will be shifted.
% We then call \cs{MFP@doshift@y} on the concatenation of the digits in
@@ -2180,7 +2180,7 @@
%
% If \arg1 of \cs{MFP@numdigits@toshift}, has $n$ digits then
% \cs{MFP@numdigits@toshift} picks out the value $8-n$. \cs{MFP@doshift@x}
-% reads the first eight digits into \cs{MFP@x@Int} and then pulls out 8 more
+% reads the first eight digits into \cs{MFP@x@Int} and then pulls out eight more
% from the rest (\arg9) inside \cs{MFP@x@Frc}. The same with
% \cs{MFP@doshift@y}.
% \begin{macrocode}
@@ -2328,7 +2328,7 @@
%
% The macro \cs{MFPget@Intdigits} should have exactly 17 digits following it.
% It puts eight of them in \cs{MFP@z@Int}, then calls \cs{MFPget@Frcdigits} to
-% read the fractional part. That requires exactly 9 digits follow it,
+% read the fractional part. That requires exactly nine digits follow it,
% putting eight in \cs{MFP@z@Frc} and the last in \cs{MFP@z@Und}. Still, to
% allow a graceful exit should there be more, we gobble the rest of the
% digits.
@@ -2450,10 +2450,10 @@
%
% \DescribeMacro{\MFPstrip}
% Stripping zeros from the right end of the fractional part. The star form
-% differs only in the handling of a zero fractional part. So we check
-% whether it is zero and when it is, we either append `\texttt{.0}' or
+% differs only in the handling of a $0$ fractional part. So we check
+% whether it is $0$ and when it is, we either append `\texttt{.0}' or
% nothing. The rest of the code grabs a digit at a time and stops when the
-% rest are zero.
+% rest are $0$.
% \begin{macrocode}
\def\MFPstrip{%
\@ifstar{\MFP@strip{}}{\MFP@strip{.0}}}%
@@ -2647,7 +2647,7 @@
%
% \DescribeMacro{\LogOfZeroInt}
% \DescribeMacro{\LogOfZeroFrac}
-% Trying to take the logarithm of 0 will result in an error message.
+% Trying to take the logarithm of $0$ will result in an error message.
% If one allows \TeX{} to continue, the returned value will be negative,
% with an integer part equal to the contents of \cs{LogOfZeroInt} and a
% fractional part equal to the contents of \cs{LogOfZeroFrac}. The
@@ -2766,7 +2766,7 @@
%
% Our degree/radian conversions try to be more accurate than a simple
% multiplication by $57.2957 7951$ or $0.0174 5329$. These conversion
-% factors are accurate to only 8 digits, and the rounding error is
+% factors are accurate to only eight digits, and the rounding error is
% magnified by multiplication. Thus we will use 16 digits for these
% constants. That is, we multiply first by $57.2957 7951$, then by the
% next eight digits ($.30823208\times 10^{-8}$), performing the ``${}\times
@@ -2794,16 +2794,16 @@
\MFP@Rcopy sy\MFP@Radd}%
% \end{macrocode}
%
-% There are very few angles that are expressible in 8 digits whose sine
-% or cosine can be expressed exactly in 8 digits. For these, we do obtain
+% There are very few angles that are expressible in eight digits whose sine
+% or cosine can be expressed exactly in eight digits. For these, we do obtain
% an exact result. Other values produce inexact results. It would be nice
-% if we could at least obtain these correctly rounded to 8 decimals, but
-% unfortunately our methods will often produce a result off by 1 in the
+% if we could at least obtain these correctly rounded to eight decimals, but
+% unfortunately our methods will often produce a result off by $1$ in the
% eighth decimal from the correctly rounded value. Anything that
% involves the addition of two or more rounded results can have this
% problem. The only way to get correctly rounded results is to carry out
% all operations internally to additional places. Even then, there will be
-% the occasional $.4999\dots$ that should round to 0 but rounds to 1
+% the occasional $.4999\dots$ that should round to $0$ but rounds to $1$
% instead.
%
% For the cosine, just compute $\sin(90-x)$.
@@ -2889,7 +2889,7 @@
% and correspondingly increasing the appropriate factors. Since the
% number of significant figures of a product is limited by the least
% number of significant figures of the two factors, the bottleneck on
-% accuracy is that of the smaller term: all our numbers have 8 digits
+% accuracy is that of the smaller term: all our numbers have eight digits
% so if a number is small, the number of nonzero digits is small.
%
% Dividing by 100 seems a good choice (so our units are
@@ -2900,41 +2900,64 @@
% computations amount to concatenating the top six digits of
% \cs{MFP@tempb} to the digits of \cs{MFP@tempa}. This will produce the
% integer form of the fractional part of $x/100$ (the integer part of
-% $x/100$ is 0).
+% $x/100$ is $0$).
+%
+% Division by $100$ can turn a number into $0$. This is one place we can
+% lose accuracy in the last digit of the result. In compensation, the rest
+% of the calculations become extremely accurate.
% \begin{macrocode}
- \advance\MFP@tempb 50
- \divide\MFP@tempb 100
- \multiply\MFP@tempa 1000000
- \advance\MFP@tempb\MFP@tempa
- \MFP@Rsin@prog
- \fi}%
+ \advance\MFP@tempb 50 \divide\MFP@tempb 100
+ \multiply\MFP@tempa 1000000 \advance\MFP@tempb\MFP@tempa
+ \ifnum\MFP@tempb=0
+ \MFP@Rzero
+ \else
% \end{macrocode}
%
-% \cs{MFP@Rsin@prog} is the power series computation. We save some
-% multiplications by working with $t=x^2$. As we don't need the original
-% $x$ anymore, we simply replace it with the new reduced value. We also
-% save this $x$ in another register, \texttt{s}, as we will need it again
-% at the end, and our intermediate calculations do not preserve the
-% \texttt{x} register. Then we square $x$ and save it in another temporary
-% register \texttt{t}:
+% We save some multiplications by working with $t=x^2$. As we don't need
+% the original $x$ anymore, we simply replace it with the newly reduced
+% value. We also save this reduced $x$ in another register, \texttt{s}, as
+% we will need it again at the end, and our intermediate calculations do
+% not preserve the \texttt{x} register. Then we square $x$ and, if that
+% square is $0$ we can skip all the power series and simply return $x$
+% converted to radians (that's the last multiplication). If $x^2$ is not
+% $0$, we save it in temporary register \texttt{t} and call our power
+% series. When this program is finished, all that remains is a final
+% multiplication by a conversion factor\dots
+% \begin{macrocode}
+ \MFP@Rload x10\MFP@tempb
+ \MFP@Rcopy xs%
+ \MFP@Rsq
+ \ifnum \MFP@z@Frc>0
+ \MFP@Rcopyz t\MFP@Rsin@prog
+ \else
+ \MFP@Rcopy sx%
+ \fi
+ \MFP@Rload y11{74532925}\MFP@Rmul
+% \end{macrocode}
+% \dots except this fiddle about the sign. Theoretically, all cases
+% where $\sin x$ can be $0$ were previously weeded out. However, I am not
+% 100 percent certain that rounding in \cs{MFP@Rsin@prog} will never
+% lead to a value of $0$.
% \begin{macrocode}
-\def\MFP@Rsin@prog{%
- \MFP@Rload x10\MFP@tempb
- \MFP@Rcopy xs%
- \MFP@Rsq
- \MFP@Rcopyz t%
+ \ifnum\MFP@z@Sgn=0 \else
+ \let\MFP@z@Sgn\MFP@sin@Sgn
+ \fi
+ \fi
+ \fi}%
% \end{macrocode}
%
-% The power series need only go to 8 terms as the ninth would be less than
-% $.5*10^{-8}$ and so our 8-place computations would return $0$. Our
-% 8-term series is:
+% \cs{MFP@Rsin@prog} is the power series computation. The power series
+% need only go to eight terms as the ninth would be less than $.5*10^{-8}$ and
+% so our 8-place computations would return $0$. Our 8-term series is:
% $$
% rx(1 - r^2t/3! + r^4t^2/5! - r^6t^3/7! + r^8t^4/9! - r^{10}t^5/11! +
% r^{12}t^6/13! - r^{14}t^7/15!)
% $$
% where $r$ is the factor that converts $x$ to radian measure
-% (hectodegrees to radians). We minimize any multiplications of tiny
-% numbers by computing this as
+% (hectodegrees to radians). When $x$ is so small as to produce $t = 0$ we
+% have skipped all this.
+%
+% We minimize any multiplications of tiny numbers by computing this as
% $$
% r(1 - gt(1 - ft(1 - et(1 - dt(1 - ct(1 - bt(1 - at))))))).
% $$
@@ -2949,13 +2972,13 @@
% from the previous one (e.g., if $u = t^3/7!$ is the fourth term, the next
% one is $u*t*(1/(8*9))$). This is a bit more complicated to code and requires
% moving values around more. It would have the advantage that we can stop
-% whenever a term evaluates to 0, making computation faster for small
+% whenever a term evaluates to $0$, making computation faster for small
% values of $x$.
%
% We avoid divisions by precomputing the coefficients $a$, $b$, $c$, etc.
% Note that without the reduction in $x$, the value of $a$ for example
-% would be $0.00000145$, with only 3 significant figures of accuracy.
-% Now we can have 7, and the accuracy is more-or-less determined by that
+% would be $0.00000145$, with only three significant figures of accuracy.
+% Now we can have seven, and the accuracy is more-or-less determined by that
% of the reduced x.
% $$
% \vcenter{\centering
@@ -2974,8 +2997,11 @@
%
% The macro \cs{MFP@com@iter} `flips' the previous result then multiplies
% by $t$ and the indicated coefficient. (The name of this macro stands for
-% ``common iterated'' code; it is reused for other power series
-% computations.)
+% ``common iterated'' code; it is reused for some other power series.)
+%
+% For extra efficiency, the power series uses a ``small'' version of
+% multiplication \cs{MFP@Rsmul}, used only when the factors are sure to
+% lie in $[0,1]$.
%
% Despite what I said above, our chosen method of computation has a
% slightly improved accuracy (in numerical experiments) if we take it one
@@ -2984,23 +3010,18 @@
% It has provably better worst-case accuracy, but on average, who knows?
% We are right at the edge of our 8-digit accuracy anyway. The constant
% \texttt{00559959} corresponds to half of $r^2/16/17$.
-%
-% For extra efficiency I am using a ``small'' version of multiplication
-% \cs{MFP@Rsmul}, used only when the multiplicands are sure to lie in
-% $[0,1]$.
% \begin{macrocode}
+\def\MFP@Rsin@prog{%
\MFP@Rcopy tx%
\MFP@Rload y10{00559959}\MFP@Rsmul\MFP@com@iter{01450559}%
\MFP@com@iter{01952675}\MFP@com@iter{02769249}\MFP@com@iter{04230797}%
\MFP@com@iter{07252796}\MFP@com@iter{15230871}\MFP@com@iter{50769570}%
- \MFP@flipz\MFP@Rcopyzx\MFP@Rcopy sy\MFP@Rsmul
- \MFP@Rcopyzx\MFP@Rload y11{74532925}\MFP@Rmul
- \let\MFP@z@Sgn\MFP@sin@Sgn}%
+ \MFP@flipz \MFP@Rcopyzx \MFP@Rcopy sy\MFP@Rsmul \MFP@Rcopyzx}%
\def\MFP@flipz{%
\ifnum\MFP@z@Sgn=0
\MFP@Rloadz 110%
\else
- \MFP@tempa\MFP@ttteight % representing 1.00000000
+ \MFP@tempa\MFP@ttteight
\advance\MFP@tempa-\MFP@z@Frc\relax
\MFP@Rloadz{\ifcase\MFP@tempa 0\else1\fi}0\MFP@tempa
\fi}%
@@ -3011,7 +3032,7 @@
%
% As to the accuracy of these computations, we can certainly lose accuracy
% at each step. In principle, if $x$ is known to 10 significant figures
-% ($x \ge 10$~degrees), then even though we lose 2 figures with division
+% ($x \ge 10$~degrees), then even though we lose two figures with division
% by 100, the accuracy bottleneck is the fact that our coefficients have
% only seven figures. Now we have 17 multiplications, and while products
% are said to have the same number of significant figures as the factors,
@@ -3021,26 +3042,26 @@
% isn't that bad, probably because the direction of inaccuracies usually
% varies randomly, and inaccuracies in one direction compensate for those
% going the other way. I have not seen a case where the result is off by
-% more than 1 in the last decimal place (i.e., $\pm 1.5\times 10^{-8}$).
+% more than $1$ in the last decimal place (i.e., $\pm 1.5\times 10^{-8}$).
% In the case where we can know the result exactly, $x=30$, we get an
-% exact answer, even though we don't single it out (as we do 0, 90 and
-% 180).
+% exact answer, even though we don't single it out (as we do $0$, $90$ and
+% $180$).
%
% The following is the ``small'' version of \cs{MFP@Rmul}. Limited to
-% non-negative numbers less than or equal to 1. Theoretically all the
+% non-negative numbers less than or equal to $1$. Theoretically all the
% numbers are strictly between $0$ and $1$, but in practice a
% multiplication could round to $0$ and then, after subtraction, a $1$
% could occur. We handle those easy cases separately, so that in
-% \cs{MFP@@Rsmul} we don't have to wory about the integer parts at all.
+% \cs{MFP@@Rsmul} we don't have to worry about the integer parts at all.
% \begin{macrocode}
\def\MFP@Rsmul{%
\ifnum \MFP@x@Sgn=0
\MFP@Rzero
\else\ifnum \MFP@y@Sgn=0
\MFP@Rzero
- \else\ifnum\MFP@x@Int>0 % x must be 1.0
+ \else\ifnum\MFP@x@Int>0
\MFP@Rcopy yz%
- \else\ifnum\MFP@y@Int>0 % y must be 1.0
+ \else\ifnum\MFP@y@Int>0
\MFP@Rcopy xz%
\else
\MFP@@Rsmul
@@ -3081,12 +3102,6 @@
% the two coordinates of a point and computes its angle in polar
% coordinates. One then has, for example, $\arctan x =
% \mathop{\rm angle}(1,x)$ and $\arccos x = \angle(x, \sqrt{1-x^2})$.
-% The latter could be obtain in a program by:
-% \begin{verbatim}
-% \Rpush\X \Rdup
-% \Rsq \Rchs
-% \Rincr \Rsqrt
-% \Rangle \end{verbatim}
%
% We start, as usual, with a few reductions. When the $y$-part is $0$, we
% immediately return $0$ or $180$. If the $y$-part is negative, we compute
@@ -3162,7 +3177,7 @@
% To get the accuracy we need we work in ``scaled reals''. That is, we
% get 10 decimal places of accuracy by letting two digits of the integer
% part represent the first two digits after the decimal point, and the
-% 8 digits of the fractional part represent digits 3 through 10 after the
+% eight digits of the fractional part represent digits 3 through 10 after the
% point. The macro \cs{MFP@RmulC} (around line 19 of the definition of
% \cs{MFP@@@Rangle}) is a quick multiplication by 100, converting the
% argument of the arctangent command to a scaled real.
@@ -3211,7 +3226,7 @@
% \end{macrocode}
%
% Here are fast multiplication and division by 100. We need these because
-% we are going to comput the arctangent in radians to ten decimal places.
+% we are going to compute the arctangent in radians to ten decimal places.
% We do this by computing with scaled reals in which, for example, $0.5$
% is represented by $50.0$. When we do this, multiplication requires a
% division by 100: $.5\times.5 = .25$ would be computed as $(50\times50) /
@@ -3244,7 +3259,7 @@
% around $0.25$ (represented by $25.0$), we have to sum to at least its
% $15$th power ($4^{-15}/15 \approx .6\times 10^{-10}$ and the next term
% in the series is effectively $0$). Fortunately, the power series has
-% only odd terms, so there are only 8 terms we actually need to calculate.
+% only odd terms, so there are only eight terms we actually need to calculate.
% The calculation proceeds much like the one for the sine, starting with
% the sum
% $$
@@ -3282,9 +3297,9 @@
% Now for logarithms. We are going to compute a base 10 logarithm. This
% allows the first step of the calculation to be essentially trivial: to
% get the integer part of the log for numbers with positive integer part,
-% count the digits in the integer part and subtract 1. For numbers less
+% count the digits in the integer part and subtract $1$. For numbers less
% than one, count the number of zeros at the beginning of the fractional
-% part and add 1 (subtract this from the result of the second part). This
+% part and add $1$ (subtract this from the result of the second part). This
% reduces the problem to numbers $1 \le x < 10$. A few divisions (when
% necessary) reduce to the case where $x = 1 + u$ with $u$ small enough
% that the power series for $\log (1 + u)$ can be computed accurately in
@@ -3307,7 +3322,7 @@
\MFP@Rload s000%
% \end{macrocode}
%
-% If the integer part is zero, the fractional part is not. Save the
+% If the integer part is $0$, the fractional part is not. Save the
% number of places that will be shifted in \cs{MFP@tempa}. We use
% \cs{number} to strip the leading zeros and (essentially) we count
% the number of digits that remain. Then we shift left, putting the first
@@ -3325,7 +3340,7 @@
\MFPpadto@eight\MFP@t@Frc
\else
% \end{macrocode}
-% When the integer part is not zero, we get the number of digits to
+% When the integer part is not $0$, we get the number of digits to
% shift again in \cs{MFP@tempa}. We actually want one less than the
% number of digits, so that is what \cs{MFP@numdigits} actually produces.
% \begin{macrocode}
@@ -3341,7 +3356,7 @@
% The integer part of $\log x$ is now known, so save it in value-so-far.
% Also, set the sign of the reduced argument to positive. Then call
% \cs{MFP@log@reduce}, which reduces $x$ to at most $10^{1/16} \approx
-% 1.155\,$. Finally, if the reduced $x$ is 1, return the value so far,
+% 1.155\,$. Finally, if the reduced $x$ is $1$, return the value so far,
% otherwise call the power series program.
% \begin{macrocode}
\edef\MFP@s@Int{\number\MFP@tempa}%
@@ -3396,8 +3411,8 @@
% \log (1 + u) = \frac{1}{\ln 10} \sum_{n=0}^\infty (-1)^n \frac{u^{n+1}}{n+1}.
% $$
% We only need to carry it far enough to assure that the next term would
-% be 0 in our finite resolution arithmetic, that is $.155^{k}/k/\ln10 < .5\times
-% 10^{-8}$. This is satisfied by $k=9$, so we only need 8 terms.
+% be $0$ in our finite resolution arithmetic, that is $.155^{k}/k/\ln10 < .5\times
+% 10^{-8}$. This is satisfied by $k=9$, so we only need eight terms.
%
% Again, we compute this by
% $$
@@ -3424,7 +3439,7 @@
%
% \subsection{Powers}
%
-% With the exponential function we immediately return 1 if $x=0$. We
+% With the exponential function we immediately return $1$ if $x=0$. We
% call two separate handlers for positive and negative $x$. This is
% because the issues are different between positive and negative
% exponents.
@@ -3436,7 +3451,7 @@
\MFP@Rexp@pos
\else
\def\MFP@x@Sgn{1}%
- \MFP@Rexp@neg % computes e^{-x}, not e^x
+ \MFP@Rexp@neg
\fi}%
% \end{macrocode}
%
@@ -3445,8 +3460,9 @@
% overflow is $18.42068074$ so we first compare to that; if larger,
% issue the error message and return $99999999.99999999$.
%
-% We compute the integer power first, using an \cs{ifcase}, because
-% there are only 19 cases to consider.
+% We compute the integer power first, using an \cs{ifcase}. Because there
+% are only 19 cases to consider a table lookup is faster than
+% multiplications.
%
% Then, we examine the first digit $d$ after the decimal and compute
% $e^{0.d}$, again by cases. This is multiplied by the integer power
@@ -3513,8 +3529,8 @@
\fi}%
% \end{macrocode}
%
-% Since the $x$ value is now less than $0.1$, we can get 8 places of
-% accuracy with only 6 terms of the power series. We can also arrange to
+% Since the $x$ value is now less than $0.1$, we can get eight places of
+% accuracy with only six terms of the power series. We can also arrange to
% use the more efficient \cs{MFP@Rsmul} for multiplication.
%
% We organize the computation thusly
@@ -3525,7 +3541,7 @@
% \texttt{z}, then repeatedly run \cs{MFP@Rexp@iter} feeding it the
% successive values of $1/n$. This iterator first multiplies the most
% recent result (the \texttt{z} register) by $1/n$, then that by $x$ and
-% then adds $x$ to that. The final step is to add 1.
+% then adds $x$ to that. The final step is to add $1$.
% \begin{macrocode}
\def\MFP@Rexp@pos@prog{%
\MFP@Rcopy tz\MFP@Rexp@iter{16666667}\MFP@Rexp@iter{20000000}%
@@ -3541,15 +3557,15 @@
% in $e^x$, That is, knowing $x$ only to $10^{-8}$ means $e^x$ is off by
% (about) $e^x\cdot 10^{-8}$. Roughly speaking, this means only about $8$
% places of $e^x$ are accurate, so if the integer part of $e^x$ has six
-% places then only 2 places after the decimal are significant. Even if
-% $x$ is exact (say $x=10$), we can only represent $e$ itself to 8
-% decimals and the repeated multiplications accumulate errors in such a
-% way that one still cannot get more than 8 significant figures.
+% places then only two places after the decimal are significant. Even if
+% $x$ is exact, we can only represent $e$ itself to eight decimals and the
+% repeated multiplications accumulate errors in such a way that one still
+% cannot get more than eight significant figures.
%
% \bigskip
% The first issue with negative exponents is that it doesn't take much to
-% produce a value of $e^{-x}$ that rounds to 0. Any $x > 19.11382792$. So
-% we start by comparing to that value and simply return 0 if $x$ is
+% produce a value of $e^{-x}$ that rounds to $0$. Any $x > 19.11382792$. So
+% we start by comparing to that value and simply return $0$ if $x$ is
% larger.
%
% We perform exactly the same reductions as for positive exponents,
@@ -3624,7 +3640,7 @@
% Since this has exactly the same form as the the power series calculation
% for $\log$ and $\sin$, we can reuse the code in \cs{MFP@com@iter}. We
% end with the final multiplication by $x$ and the subtraction from 1
-% rather than call \cs{MFP@com@iter} with a useless multiplication by 1.
+% rather than call \cs{MFP@com@iter} with a useless multiplication by $1$.
% \begin{macrocode}
\def\MFP@Rexp@neg@prog{%
\MFP@Rcopy tx\MFP@Rload y10{16666667}\MFP@Rsmul
@@ -3671,13 +3687,13 @@
\MFP@msgbreak The fractional part will be ignored}%
\fi
\MFP@loopctr=\MFP@y@Int\relax
- \ifnum\MFP@loopctr=0 % zero power = 1
+ \ifnum\MFP@loopctr=0
\MFP@Rloadz 110%
\else
\ifnum\MFP@x@Sgn=0
- \ifnum\MFP@y@Sgn>0 % + powers of zero are 0
+ \ifnum\MFP@y@Sgn>0
\MFP@Rloadz 000%
- \else % - powers are errors
+ \else
\MFP@badpower@err
\MFP@Rloadz 1\xOverZeroInt\xOverZeroFrac
\fi
@@ -3762,14 +3778,14 @@
% $\sqrt{9} = 3$. In fact, if a square root can be expressed exactly
% within our 8-digit precision, our code will find it.
%
-% For the square root we return 0 if $x$ is not positive. If the integer
+% For the square root we return $0$ if $x$ is not positive. If the integer
% part of $x$ is $0$, we copy the fractional part to the integer part
% (that is, we multiply by $10^{8}$, remembering to multiply by $10^{-4}$
% later). This makes the square root of such numbers slightly more
% accurate. We then compute the square root using an algorithm that will
% be exact whenever possible. We perform one additional processing step.
% To explain it, note that our algorithm actually produces the largest
-% number $s$ with 4 digits right of the decimal place that satisfies $s^2
+% number $s$ with four digits right of the decimal place that satisfies $s^2
% \le x$. That is
% $$
% s^2 \le x < \left( s + 10^{-4} \right)^2
@@ -3790,7 +3806,7 @@
%
% I originally tried power series methods, but they failed to produce
% exact answers when they existed (unless they were inconveniently carried
-% to 9 decimals and then rounded to 8). Then I tried the ``exact when
+% to nine decimals and then rounded to eight). Then I tried the ``exact when
% possible'' algorithm to get $s$, but correcting it as follows: find
% $\sqrt{x/s^2}$ by power series and multiply by $s$. But this turned out
% to be remarkably inaccurate, being paradoxically worst when $s$ is
@@ -3842,12 +3858,12 @@
% The process turns out to be simpler if we convert $10^8 x$ to base 4
% rather than binary. Also, instead of producing the square root encoded
% in a string of binary digits, we simply build the numerical result as we
-% discover the binary digits (multiply previous value by 2 and add the
+% discover the binary digits (multiply previous value by two and add the
% new digit.) Fortunately, the square root of $10^8 x$ (and the
% temporary scratch registers used in the code) will never exceed \TeX{}'s
% limit for integers.
%
-% The macro \cs{MFP@ItoQ} implements the conversion to base 4 digits.
+% The macro \cs{MFP@ItoQ} implements the conversion to base-4 digits.
% The two arguments are the integer and fractional part of $x$. The
% result is stored in \cs{MFP@ItoQ@Tmp}, which is so far only used by the
% square root code.
@@ -3856,9 +3872,9 @@
% Combining two of them yields the quadrenary digits. The
% \cs{ifodd}\cs{MFP@tempa} tests are there to check whether there
% will be a remainder after division by $2$, which should then be
-% inserted at the front of \cs{MFP@tempb} before division by 2. Two
-% divisions by 2 each iteration amounts to division by 4. This is slightly
-% more efficient than dividing by 4 and determining the remainder.
+% inserted at the front of \cs{MFP@tempb} before division by $2$. Two
+% divisions by $2$ each iteration amounts to division by $4$. This is slightly
+% more efficient than dividing by $4$ and determining the remainder.
% \begin{macrocode}
\def\MFP@ItoQ#1#2{%
\MFP@tempa#1\relax\MFP@tempb#2\relax
@@ -3883,7 +3899,7 @@
% \end{macrocode}
%
% This integer square root $n$ is $10^4$ times the largest number $y$
-% satisfying $y^2 \le x$ and having at most 4 decimal places. The rest of
+% satisfying $y^2 \le x$ and having at most four decimal places. The rest of
% the code after the \cs{MFP@Isqrt@loop} is intended to divide $n$
% (returned in \cs{MFP@tempc}) by $10^4$ in order to get the number $y$
% itself.
@@ -3905,9 +3921,8 @@
%
% The following is a loop that essentially performs a base-2 version of
% the base-10 algorithm that I learned at age 12 from my father
-% (apparently it was taught in 8th or 9th grade in his day: he never
-% finished grade 9). Seeing it written out, I am surprise at how concise
-% and elegant it is!
+% (apparently it was taught in eighth or ninth grade in his day). Seeing
+% it written out, I am surprise at how concise and elegant it is!
% \begin{macrocode}
\def\MFP@Isqrt@loop#1{%
\ifx\mfp@end #1%
@@ -3930,7 +3945,7 @@
% \cs{MFP@tempb}, but only if the last digit is a 1. Then the next
% quadrenary digit is appended to \cs{MFP@tempb}. Finally, the last binary
% digit found is added (not appended) to \cs{MFP@tempa}. The ``appending''
-% of a digit means a multiplication by 2 (or 4) and the addition of the
+% of a digit means a multiplication by $2$ (or $4$) and the addition of the
% digit. We perform such additions only if the digit is a 1, and we
% determine if the digit is 1 or 0 by the \cs{ifnum} test.
%\Finale
diff --git a/Master/texmf-dist/tex/generic/minifp/mfpextra.tex b/Master/texmf-dist/tex/generic/minifp/mfpextra.tex
index 7d541bd4747..2e9a6d88bf0 100644
--- a/Master/texmf-dist/tex/generic/minifp/mfpextra.tex
+++ b/Master/texmf-dist/tex/generic/minifp/mfpextra.tex
@@ -124,29 +124,36 @@
\ifnum\MFP@tempa=90
\MFP@Rloadz \MFP@sin@Sgn10%
\else
- \advance\MFP@tempb 50
- \divide\MFP@tempb 100
- \multiply\MFP@tempa 1000000
- \advance\MFP@tempb\MFP@tempa
- \MFP@Rsin@prog
+ \advance\MFP@tempb 50 \divide\MFP@tempb 100
+ \multiply\MFP@tempa 1000000 \advance\MFP@tempb\MFP@tempa
+ \ifnum\MFP@tempb=0
+ \MFP@Rzero
+ \else
+ \MFP@Rload x10\MFP@tempb
+ \MFP@Rcopy xs%
+ \MFP@Rsq
+ \ifnum \MFP@z@Frc>0
+ \MFP@Rcopyz t\MFP@Rsin@prog
+ \else
+ \MFP@Rcopy sx%
+ \fi
+ \MFP@Rload y11{74532925}\MFP@Rmul
+ \ifnum\MFP@z@Sgn=0 \else
+ \let\MFP@z@Sgn\MFP@sin@Sgn
+ \fi
+ \fi
\fi}%
\def\MFP@Rsin@prog{%
- \MFP@Rload x10\MFP@tempb
- \MFP@Rcopy xs%
- \MFP@Rsq
- \MFP@Rcopyz t%
\MFP@Rcopy tx%
\MFP@Rload y10{00559959}\MFP@Rsmul\MFP@com@iter{01450559}%
\MFP@com@iter{01952675}\MFP@com@iter{02769249}\MFP@com@iter{04230797}%
\MFP@com@iter{07252796}\MFP@com@iter{15230871}\MFP@com@iter{50769570}%
- \MFP@flipz\MFP@Rcopyzx\MFP@Rcopy sy\MFP@Rsmul
- \MFP@Rcopyzx\MFP@Rload y11{74532925}\MFP@Rmul
- \let\MFP@z@Sgn\MFP@sin@Sgn}%
+ \MFP@flipz \MFP@Rcopyzx \MFP@Rcopy sy\MFP@Rsmul \MFP@Rcopyzx}%
\def\MFP@flipz{%
\ifnum\MFP@z@Sgn=0
\MFP@Rloadz 110%
\else
- \MFP@tempa\MFP@ttteight % representing 1.00000000
+ \MFP@tempa\MFP@ttteight
\advance\MFP@tempa-\MFP@z@Frc\relax
\MFP@Rloadz{\ifcase\MFP@tempa 0\else1\fi}0\MFP@tempa
\fi}%
@@ -158,9 +165,9 @@
\MFP@Rzero
\else\ifnum \MFP@y@Sgn=0
\MFP@Rzero
- \else\ifnum\MFP@x@Int>0 % x must be 1.0
+ \else\ifnum\MFP@x@Int>0
\MFP@Rcopy yz%
- \else\ifnum\MFP@y@Int>0 % y must be 1.0
+ \else\ifnum\MFP@y@Int>0
\MFP@Rcopy xz%
\else
\MFP@@Rsmul
@@ -370,7 +377,7 @@
\MFP@Rexp@pos
\else
\def\MFP@x@Sgn{1}%
- \MFP@Rexp@neg % computes e^{-x}, not e^x
+ \MFP@Rexp@neg
\fi}%
\def\MFP@Rexp@pos{%
\MFP@Rload y1{18}{42068074}\MFP@Rcmp
@@ -506,13 +513,13 @@
\MFP@msgbreak The fractional part will be ignored}%
\fi
\MFP@loopctr=\MFP@y@Int\relax
- \ifnum\MFP@loopctr=0 % zero power = 1
+ \ifnum\MFP@loopctr=0
\MFP@Rloadz 110%
\else
\ifnum\MFP@x@Sgn=0
- \ifnum\MFP@y@Sgn>0 % + powers of zero are 0
+ \ifnum\MFP@y@Sgn>0
\MFP@Rloadz 000%
- \else % - powers are errors
+ \else
\MFP@badpower@err
\MFP@Rloadz 1\xOverZeroInt\xOverZeroFrac
\fi
diff --git a/Master/texmf-dist/tex/generic/minifp/minifp.sty b/Master/texmf-dist/tex/generic/minifp/minifp.sty
index 21462ece64f..321ec4197f1 100644
--- a/Master/texmf-dist/tex/generic/minifp/minifp.sty
+++ b/Master/texmf-dist/tex/generic/minifp/minifp.sty
@@ -21,8 +21,8 @@
%% is Daniel H. Luecking. The Base Interpreters associated
%% with minifp are plain TeX and LaTeX.
%%
-\def\MFPfiledate{2013/01/01}%
-\def\MFPfileversion{0.9}%
+\def\MFPfiledate{2013/02/01}%
+\def\MFPfileversion{0.92}%
\expandafter
\ifx \csname MFP@finish\endcsname\relax
\else \expandafter\endinput \fi
@@ -144,7 +144,7 @@
\errmessage{MiniFP error: #1}%
\endgroup}%
\def\MFP@popempty@err{%
- \MFP@errmsg{cannot pop from an empty stack}%
+ \MFP@errmsg{cannot POP from an empty stack}%
{There were no items on the stack for the POP operation. %
If you continue, ^^Jthe macro will contain the %
value \EndofStack.}}%
@@ -387,7 +387,7 @@
\advance\MFP@tempa1
\fi
\fi
- \MFP@Rloadz{\ifnum\MFP@z@Int=0 0\else\MFP@x@Sgn\fi}\MFP@tempa0}%
+ \MFP@Rloadz{\ifnum\MFP@x@Int=0 0\else\MFP@x@Sgn\fi}\MFP@tempa0}%
\def\MFP@Rfloor{\MFP@Rfloororceil>}%
\def\MFP@Rceil {\MFP@Rfloororceil<}%
\def\MFP@split#1#2#3{%