summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Build/source/texk/texlive/linked_scripts/Makefile.am105
-rw-r--r--Build/source/texk/texlive/linked_scripts/Makefile.in278
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/musixtex/musixtex.lua44
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/ChangeLog748
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/allcm.128
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/allcm.sh118
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/allec.128
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/allneeded.130
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/allneeded.sh46
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.122
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/dvi2fax.sh41
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/dvired.163
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/dvired.sh98
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/e2pall.155
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/e2pall.pl89
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/fmtutil-sys.sh29
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/fmtutil.1113
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf126
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf.577
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/fmtutil.sh1017
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/fontinst.145
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/fontinst.sh16
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/kpsetool.1106
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/kpsetool.sh118
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.150
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/kpsewhere.sh63
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/ps2frag.141
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/ps2frag.sh11
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/pslatex.144
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/pslatex.sh46
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/rubibtex.163
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/rubibtex.sh110
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.163
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/rumakeindex.sh77
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/tcfmgr386
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/tcfmgr.map10
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/texconfig-dialog.sh486
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/texconfig-sys.sh31
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/texconfig.1215
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/texconfig.sh1432
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/texlinks.166
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/texlinks.sh335
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/updmap-sys.sh30
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/updmap.1360
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/updmap.cfg.5155
-rw-r--r--Build/source/texk/texlive/linked_scripts/tetex/updmap.help2man100
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/tetex/updmap.pl2306
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/ChangeLog25
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/README20
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/addons/README.underbracket64
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/gpl.txt251
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/musixtex-install.pdfbin94387 -> 94410 bytes
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/musixtex-install.tex16
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.143
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.html84
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.pdfbin4339 -> 0 bytes
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.188
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.html163
-rw-r--r--Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.pdfbin4276 -> 0 bytes
-rwxr-xr-xMaster/texmf-dist/scripts/musixtex/Windows/musixflx.bat6
-rwxr-xr-xMaster/texmf-dist/scripts/musixtex/Windows/musixtex.bat6
-rwxr-xr-xMaster/texmf-dist/scripts/musixtex/musixtex.lua44
-rw-r--r--Master/texmf/doc/man/man1/musixtex.18
-rw-r--r--Master/texmf/doc/man/man1/musixtex.man1.pdfbin4298 -> 4381 bytes
-rwxr-xr-xMaster/tlpkg/libexec/ctan2tds30
65 files changed, 439 insertions, 10329 deletions
diff --git a/Build/source/texk/texlive/linked_scripts/Makefile.am b/Build/source/texk/texlive/linked_scripts/Makefile.am
index 297f0ddeb3e..a53ab4cc3c3 100644
--- a/Build/source/texk/texlive/linked_scripts/Makefile.am
+++ b/Build/source/texk/texlive/linked_scripts/Makefile.am
@@ -1,6 +1,6 @@
## Makefile.am for the TeX Live subdirectory texk/texlive/linked_scripts/
##
-## Copyright (C) 2009-2012 Peter Breitenlohner <tex-live@tug.org>
+## Copyright (C) 2009-2013 Peter Breitenlohner <tex-live@tug.org>
## You may freely use, modify and/or distribute this file.
##
## TeX Live's extra scripts.
@@ -51,21 +51,9 @@ installdirs-local:
## scripts because they are correctly handled by the wrapper binaries.
##
texmf_scriptsdir = $(datarootdir)/texmf/scripts
-texmf_shell_scripts = \
- tetex/fmtutil.sh \
- tetex/texconfig.sh \
- tetex/texconfig-dialog.sh \
- tetex/texconfig-sys.sh \
- tetex/texlinks.sh
-texmf_other_scripts = \
- tetex/fmtutil-sys.sh \
+nobase_dist_texmf_scripts_SCRIPTS = \
texlive/rungs.tlu \
texlive/tlmgr.pl
-texmf_context_scripts =
-nobase_dist_texmf_scripts_SCRIPTS = \
- $(texmf_shell_scripts) \
- $(texmf_other_scripts) \
- $(texmf_context_scripts)
texmf_dist_scriptsdir = $(datarootdir)/texmf-dist/scripts
texmf_dist_shell_scripts = \
@@ -90,17 +78,6 @@ texmf_dist_shell_scripts = \
pdfjam/pdfpun \
pst-pdf/ps4pdf \
simpdftex/simpdftex \
- tetex/allcm.sh \
- tetex/allneeded.sh \
- tetex/dvi2fax.sh \
- tetex/dvired.sh \
- tetex/fontinst.sh \
- tetex/kpsetool.sh \
- tetex/kpsewhere.sh \
- tetex/ps2frag.sh \
- tetex/pslatex.sh \
- tetex/rubibtex.sh \
- tetex/rumakeindex.sh \
typeoutfileinfo/typeoutfileinfo.sh
texmf_dist_other_scripts = \
a2ping/a2ping.pl \
@@ -160,9 +137,6 @@ texmf_dist_other_scripts = \
splitindex/perl/splitindex.pl \
sty2dtx/sty2dtx.pl \
svn-multi/svn-multi.pl \
- tetex/e2pall.pl \
- tetex/updmap.pl \
- tetex/updmap-sys.sh \
texdoc/texdoc.tlu \
texcount/texcount.pl \
texdef/texdef.pl \
@@ -189,10 +163,6 @@ bin_links = \
pdfcrop:rpdfcrop
if !WIN32
bin_links += \
- allcm:allec \
- fmtutil:mktexfmt \
- kpsetool:kpsexpand \
- kpsetool:kpsepath \
lua2dox_lua:lua2dox_filter
endif !WIN32
@@ -200,48 +170,8 @@ endif !WIN32
dist_man_MANS = \
context/context.1 \
context/mptopdf.1 \
- tetex/allcm.1 \
- tetex/allec.1 \
- tetex/allneeded.1 \
- tetex/dvi2fax.1 \
- tetex/dvired.1 \
- tetex/e2pall.1 \
- tetex/fmtutil.1 \
- tetex/fmtutil.cnf.5 \
- tetex/fontinst.1 \
- tetex/kpsetool.1 \
- tetex/kpsewhere.1 \
- tetex/ps2frag.1 \
- tetex/pslatex.1 \
- tetex/rubibtex.1 \
- tetex/rumakeindex.1 \
- tetex/texconfig.1 \
- tetex/texlinks.1 \
- tetex/updmap.1 \
- tetex/updmap.cfg.5 \
thumbpdf/thumbpdf.1
-man1_links = \
- fmtutil:fmtutil-sys \
- kpsetool:kpsexpand \
- kpsetool:kpsepath \
- fmtutil:mktexfmt \
- texconfig:texconfig-sys \
- updmap:updmap-sys
-
-include $(top_srcdir)/../am/man1_links.am
-
-## Old ../../tetex/ChangeLog
-EXTRA_DIST += tetex/ChangeLog
-
-## Support files
-texconfigdir = $(datarootdir)/texmf/texconfig
-dist_texconfig_SCRIPTS = tetex/tcfmgr
-dist_texconfig_DATA = tetex/tcfmgr.map
-
-web2cdir = $(datarootdir)/texmf/web2c
-dist_web2c_DATA = tetex/fmtutil.cnf
-
# The idea is to install the scripts themselves in texmf*/scripts, and
# have bin/arch/foo be a symlink to, say,
# ../../texmf-dist/scripts/foo/foo.pl. That way we save a bit of disk
@@ -266,7 +196,7 @@ EXTRA_DIST += ../../../build-aux/relpath
relpath = $(SHELL) $(top_srcdir)/../../build-aux/relpath
runscript = $(top_srcdir)/w32_wrapper/runscript.exe
ctxscript = $(top_srcdir)/w32_wrapper/context/mtxrun.exe
-install-data-hook: installdirs-local install-man1-links
+install-data-hook: installdirs-local
if WIN32
@for s in $(texmf_other_scripts) $(texmf_dist_other_scripts); do \
t=`basename $$s | sed 's,\.[^/]*$$,,' | tr '[A-Z]' '[a-z]'`; \
@@ -334,7 +264,7 @@ if WIN32
WINEXT = $(EXEEXT)
endif WIN32
-uninstall-hook: uninstall-man1-links
+uninstall-hook:
@for s in $(nobase_dist_texmf_scripts_SCRIPTS) $(nobase_dist_texmf_dist_scripts_SCRIPTS); do \
target=`basename $$s | tr '[A-Z]' '[a-z]'`; \
echo "$$s" | grep listings-ext.sh >/dev/null \
@@ -351,16 +281,6 @@ if !WIN32
else :; fi
endif !WIN32
-## Generate the updmap man page using help2man plus a bit of
-## handwritten material. But don't actually update updmap.1,
-## we don't want to require help2man for an install. Leave that to be
-## done by hand.
-.PHONY: xupdmap.1
-xupdmap.1: tetex/updmap.help2man tetex/updmap.pl
- help2man --include=$< --source="TeX Live" --no-info \
- $(srcdir)/tetex/updmap.pl >/tmp/$@
-EXTRA_DIST += tetex/updmap.help2man
-
##
## This target is invoked by check-wrapper-consistency (run from cron).
.PHONY: echo-shell-scripts
@@ -368,20 +288,3 @@ shell_scripts = $(texmf_shell_scripts) $(texmf_dist_shell_scripts)
shell_scripts += $(texmf_dist_context_scripts)
echo-shell-scripts:
@echo $(shell_scripts)
-
-##
-## This target is invoked by the top-level make,
-.PHONY: run-texlinks
-## to create the per-format engine symlinks in $(bindir),
-## after everything else is installed. We explicitly specify the
-## fmtutil.cnf file to use for the sake of distro builds.
-## We pass along the executable extension for the sake of cygwin, so we
-## don't create dangling symlinks there (even though they work).
-run_texlinks = $(DESTDIR)$(bindir)/texlinks -v \
- -f $(DESTDIR)$(web2cdir)/fmtutil.cnf \
- -e "$(EXEEXT)" $(DESTDIR)$(bindir)
-run-texlinks:
-if !WIN32
- PATH="$(DESTDIR)$(bindir):$(PATH)"; export PATH; $(run_texlinks)
-endif !WIN32
-
diff --git a/Build/source/texk/texlive/linked_scripts/Makefile.in b/Build/source/texk/texlive/linked_scripts/Makefile.in
index f9e7a4e0669..cfc816151cb 100644
--- a/Build/source/texk/texlive/linked_scripts/Makefile.in
+++ b/Build/source/texk/texlive/linked_scripts/Makefile.in
@@ -14,7 +14,6 @@
@SET_MAKE@
-
VPATH = @srcdir@
am__make_dryrun = \
{ \
@@ -50,18 +49,13 @@ NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
@WIN32_FALSE@am__append_1 = \
-@WIN32_FALSE@ allcm:allec \
-@WIN32_FALSE@ fmtutil:mktexfmt \
-@WIN32_FALSE@ kpsetool:kpsexpand \
-@WIN32_FALSE@ kpsetool:kpsepath \
@WIN32_FALSE@ lua2dox_lua:lua2dox_filter
-DIST_COMMON = $(top_srcdir)/../am/man1_links.am $(srcdir)/Makefile.in \
- $(srcdir)/Makefile.am $(dist_texconfig_SCRIPTS) \
+subdir = linked_scripts
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(nobase_dist_texmf_dist_scripts_SCRIPTS) \
$(nobase_dist_texmf_scripts_SCRIPTS) $(dist_man_MANS) \
- $(dist_texconfig_DATA) $(dist_web2c_DATA) ChangeLog README
-subdir = linked_scripts
+ ChangeLog README
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-win32.m4 \
$(top_srcdir)/configure.ac
@@ -97,13 +91,9 @@ am__uninstall_files_from_dir = { \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
-am__installdirs = "$(DESTDIR)$(texconfigdir)" \
- "$(DESTDIR)$(texmf_dist_scriptsdir)" \
- "$(DESTDIR)$(texmf_scriptsdir)" "$(DESTDIR)$(man1dir)" \
- "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(texconfigdir)" \
- "$(DESTDIR)$(web2cdir)"
-SCRIPTS = $(dist_texconfig_SCRIPTS) \
- $(nobase_dist_texmf_dist_scripts_SCRIPTS) \
+am__installdirs = "$(DESTDIR)$(texmf_dist_scriptsdir)" \
+ "$(DESTDIR)$(texmf_scriptsdir)" "$(DESTDIR)$(man1dir)"
+SCRIPTS = $(nobase_dist_texmf_dist_scripts_SCRIPTS) \
$(nobase_dist_texmf_scripts_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
@@ -125,10 +115,8 @@ am__can_run_installinfo = \
*) (install-info --version) >/dev/null 2>&1;; \
esac
man1dir = $(mandir)/man1
-man5dir = $(mandir)/man5
NROFF = nroff
MANS = $(dist_man_MANS)
-DATA = $(dist_texconfig_DATA) $(dist_web2c_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
@@ -239,32 +227,17 @@ DISTCLEANFILES = scripts-list
#
# We support native builds, multiplatform or not, as well as distro builds.
#
-EXTRA_DIST = scripts.lst tetex/ChangeLog ../../../build-aux/relpath \
- tetex/updmap.help2man
+EXTRA_DIST = scripts.lst ../../../build-aux/relpath
# Copies of these scripts exist here for the sake of avoiding
# dangling symlinks produced by `make install'.
# The instances in texmf* are the masters (except when it is CTAN).
#
texmf_scriptsdir = $(datarootdir)/texmf/scripts
-texmf_shell_scripts = \
- tetex/fmtutil.sh \
- tetex/texconfig.sh \
- tetex/texconfig-dialog.sh \
- tetex/texconfig-sys.sh \
- tetex/texlinks.sh
-
-texmf_other_scripts = \
- tetex/fmtutil-sys.sh \
+nobase_dist_texmf_scripts_SCRIPTS = \
texlive/rungs.tlu \
texlive/tlmgr.pl
-texmf_context_scripts =
-nobase_dist_texmf_scripts_SCRIPTS = \
- $(texmf_shell_scripts) \
- $(texmf_other_scripts) \
- $(texmf_context_scripts)
-
texmf_dist_scriptsdir = $(datarootdir)/texmf-dist/scripts
texmf_dist_shell_scripts = \
adhocfilelist/adhocfilelist.sh \
@@ -288,17 +261,6 @@ texmf_dist_shell_scripts = \
pdfjam/pdfpun \
pst-pdf/ps4pdf \
simpdftex/simpdftex \
- tetex/allcm.sh \
- tetex/allneeded.sh \
- tetex/dvi2fax.sh \
- tetex/dvired.sh \
- tetex/fontinst.sh \
- tetex/kpsetool.sh \
- tetex/kpsewhere.sh \
- tetex/ps2frag.sh \
- tetex/pslatex.sh \
- tetex/rubibtex.sh \
- tetex/rumakeindex.sh \
typeoutfileinfo/typeoutfileinfo.sh
texmf_dist_other_scripts = \
@@ -359,9 +321,6 @@ texmf_dist_other_scripts = \
splitindex/perl/splitindex.pl \
sty2dtx/sty2dtx.pl \
svn-multi/svn-multi.pl \
- tetex/e2pall.pl \
- tetex/updmap.pl \
- tetex/updmap-sys.sh \
texdoc/texdoc.tlu \
texcount/texcount.pl \
texdef/texdef.pl \
@@ -388,54 +347,18 @@ bin_links = epstopdf:repstopdf pdfcrop:rpdfcrop $(am__append_1)
dist_man_MANS = \
context/context.1 \
context/mptopdf.1 \
- tetex/allcm.1 \
- tetex/allec.1 \
- tetex/allneeded.1 \
- tetex/dvi2fax.1 \
- tetex/dvired.1 \
- tetex/e2pall.1 \
- tetex/fmtutil.1 \
- tetex/fmtutil.cnf.5 \
- tetex/fontinst.1 \
- tetex/kpsetool.1 \
- tetex/kpsewhere.1 \
- tetex/ps2frag.1 \
- tetex/pslatex.1 \
- tetex/rubibtex.1 \
- tetex/rumakeindex.1 \
- tetex/texconfig.1 \
- tetex/texlinks.1 \
- tetex/updmap.1 \
- tetex/updmap.cfg.5 \
thumbpdf/thumbpdf.1
-man1_links = \
- fmtutil:fmtutil-sys \
- kpsetool:kpsexpand \
- kpsetool:kpsepath \
- fmtutil:mktexfmt \
- texconfig:texconfig-sys \
- updmap:updmap-sys
-
-texconfigdir = $(datarootdir)/texmf/texconfig
-dist_texconfig_SCRIPTS = tetex/tcfmgr
-dist_texconfig_DATA = tetex/tcfmgr.map
-web2cdir = $(datarootdir)/texmf/web2c
-dist_web2c_DATA = tetex/fmtutil.cnf
relpath = $(SHELL) $(top_srcdir)/../../build-aux/relpath
runscript = $(top_srcdir)/w32_wrapper/runscript.exe
ctxscript = $(top_srcdir)/w32_wrapper/context/mtxrun.exe
@WIN32_TRUE@WINEXT = $(EXEEXT)
shell_scripts = $(texmf_shell_scripts) $(texmf_dist_shell_scripts) \
$(texmf_dist_context_scripts)
-run_texlinks = $(DESTDIR)$(bindir)/texlinks -v \
- -f $(DESTDIR)$(web2cdir)/fmtutil.cnf \
- -e "$(EXEEXT)" $(DESTDIR)$(bindir)
-
all: all-am
.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/../am/man1_links.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@@ -456,7 +379,6 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
-$(top_srcdir)/../am/man1_links.am:
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
@@ -466,41 +388,6 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
-install-dist_texconfigSCRIPTS: $(dist_texconfig_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(dist_texconfig_SCRIPTS)'; test -n "$(texconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(texconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(texconfigdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(texconfigdir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(texconfigdir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-dist_texconfigSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_texconfig_SCRIPTS)'; test -n "$(texconfigdir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(texconfigdir)'; $(am__uninstall_files_from_dir)
install-nobase_dist_texmf_dist_scriptsSCRIPTS: $(nobase_dist_texmf_dist_scripts_SCRIPTS)
@$(NORMAL_INSTALL)
@list='$(nobase_dist_texmf_dist_scripts_SCRIPTS)'; test -n "$(texmf_dist_scriptsdir)" || list=; \
@@ -628,91 +515,6 @@ uninstall-man1:
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-install-man5: $(dist_man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(dist_man_MANS)'; \
- test -n "$(man5dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.5[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
- done; }
-
-uninstall-man5:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man5dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.5[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
-install-dist_texconfigDATA: $(dist_texconfig_DATA)
- @$(NORMAL_INSTALL)
- @list='$(dist_texconfig_DATA)'; test -n "$(texconfigdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(texconfigdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(texconfigdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(texconfigdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(texconfigdir)" || exit $$?; \
- done
-
-uninstall-dist_texconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_texconfig_DATA)'; test -n "$(texconfigdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(texconfigdir)'; $(am__uninstall_files_from_dir)
-install-dist_web2cDATA: $(dist_web2c_DATA)
- @$(NORMAL_INSTALL)
- @list='$(dist_web2c_DATA)'; test -n "$(web2cdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(web2cdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(web2cdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(web2cdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(web2cdir)" || exit $$?; \
- done
-
-uninstall-dist_web2cDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_web2c_DATA)'; test -n "$(web2cdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(web2cdir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
@@ -752,9 +554,9 @@ distdir: $(DISTFILES)
done
check-am: all-am
check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS) $(DATA) all-local
+all-am: Makefile $(SCRIPTS) $(MANS) all-local
installdirs: installdirs-local
- for dir in "$(DESTDIR)$(texconfigdir)" "$(DESTDIR)$(texmf_dist_scriptsdir)" "$(DESTDIR)$(texmf_scriptsdir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(texconfigdir)" "$(DESTDIR)$(web2cdir)"; do \
+ for dir in "$(DESTDIR)$(texmf_dist_scriptsdir)" "$(DESTDIR)$(texmf_scriptsdir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
@@ -808,9 +610,8 @@ info: info-am
info-am:
-install-data-am: install-dist_texconfigDATA \
- install-dist_texconfigSCRIPTS install-dist_web2cDATA \
- install-man install-nobase_dist_texmf_dist_scriptsSCRIPTS \
+install-data-am: install-man \
+ install-nobase_dist_texmf_dist_scriptsSCRIPTS \
install-nobase_dist_texmf_scriptsSCRIPTS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
@@ -828,7 +629,7 @@ install-info: install-info-am
install-info-am:
-install-man: install-man1 install-man5
+install-man: install-man1
install-pdf: install-pdf-am
@@ -856,33 +657,28 @@ ps: ps-am
ps-am:
-uninstall-am: uninstall-dist_texconfigDATA \
- uninstall-dist_texconfigSCRIPTS uninstall-dist_web2cDATA \
- uninstall-man uninstall-nobase_dist_texmf_dist_scriptsSCRIPTS \
+uninstall-am: uninstall-man \
+ uninstall-nobase_dist_texmf_dist_scriptsSCRIPTS \
uninstall-nobase_dist_texmf_scriptsSCRIPTS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-uninstall-man: uninstall-man1 uninstall-man5
+uninstall-man: uninstall-man1
.MAKE: install-am install-data-am install-strip uninstall-am
.PHONY: all all-am all-local check check-am clean clean-generic \
cscopelist-am ctags-am distclean distclean-generic distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-data-hook \
- install-dist_texconfigDATA install-dist_texconfigSCRIPTS \
- install-dist_web2cDATA install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man1 install-man5 \
- install-nobase_dist_texmf_dist_scriptsSCRIPTS \
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-nobase_dist_texmf_dist_scriptsSCRIPTS \
install-nobase_dist_texmf_scriptsSCRIPTS install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-local \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am uninstall-dist_texconfigDATA \
- uninstall-dist_texconfigSCRIPTS uninstall-dist_web2cDATA \
- uninstall-hook uninstall-man uninstall-man1 uninstall-man5 \
+ uninstall-am uninstall-hook uninstall-man uninstall-man1 \
uninstall-nobase_dist_texmf_dist_scriptsSCRIPTS \
uninstall-nobase_dist_texmf_scriptsSCRIPTS
@@ -902,24 +698,7 @@ scripts-list: Makefile
installdirs-local:
$(MKDIR_P) $(DESTDIR)$(bindir)
-.PHONY: install-man1-links uninstall-man1-links
-
-install-man1-links:
- @cd $(DESTDIR)$(man1dir) && \
- for s in $(man1_links); do \
- link=`echo $$s | sed 's,.*:,,'`; \
- file=`echo $$s | sed 's,:.*,,'`; \
- rm -f $$link.1; \
- echo "creating link '$$link.1' -> '$$file.1'"; \
- echo ".so man1/$$file.1" >$$link.1; \
- done
-
-uninstall-man1-links:
- @for s in $(man1_links); do \
- link=`echo $$s | sed 's,.*:,,'`; \
- rm -f $(DESTDIR)$(man1dir)/$$link.1; \
- done
-install-data-hook: installdirs-local install-man1-links
+install-data-hook: installdirs-local
@WIN32_TRUE@ @for s in $(texmf_other_scripts) $(texmf_dist_other_scripts); do \
@WIN32_TRUE@ t=`basename $$s | sed 's,\.[^/]*$$,,' | tr '[A-Z]' '[a-z]'`; \
@WIN32_TRUE@ echo "$(INSTALL_SCRIPT) '$(runscript)' '$(DESTDIR)$(bindir)/$$t.exe'"; \
@@ -973,7 +752,7 @@ install-data-hook: installdirs-local install-man1-links
.PHONY: install-links
install-links:
-uninstall-hook: uninstall-man1-links
+uninstall-hook:
@for s in $(nobase_dist_texmf_scripts_SCRIPTS) $(nobase_dist_texmf_dist_scripts_SCRIPTS); do \
target=`basename $$s | tr '[A-Z]' '[a-z]'`; \
echo "$$s" | grep listings-ext.sh >/dev/null \
@@ -988,19 +767,10 @@ uninstall-hook: uninstall-man1-links
@WIN32_FALSE@ rm -f $(DESTDIR)$(bindir)/man; \
@WIN32_FALSE@ else :; fi
-.PHONY: xupdmap.1
-xupdmap.1: tetex/updmap.help2man tetex/updmap.pl
- help2man --include=$< --source="TeX Live" --no-info \
- $(srcdir)/tetex/updmap.pl >/tmp/$@
-
.PHONY: echo-shell-scripts
echo-shell-scripts:
@echo $(shell_scripts)
-.PHONY: run-texlinks
-run-texlinks:
-@WIN32_FALSE@ PATH="$(DESTDIR)$(bindir):$(PATH)"; export PATH; $(run_texlinks)
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Build/source/texk/texlive/linked_scripts/musixtex/musixtex.lua b/Build/source/texk/texlive/linked_scripts/musixtex/musixtex.lua
index 6bac25e8d8a..1386db71fde 100755
--- a/Build/source/texk/texlive/linked_scripts/musixtex/musixtex.lua
+++ b/Build/source/texk/texlive/linked_scripts/musixtex/musixtex.lua
@@ -1,11 +1,11 @@
#!/usr/bin/env texlua
-VERSION = "0.4"
+VERSION = "0.6"
--[[
musixtex.lua: processes MusiXTeX files (and deletes intermediate files)
- (c) Copyright 2011 Bob Tennent rdt@cs.queensu.ca
+ (c) Copyright 2012 Bob Tennent rdt@cs.queensu.ca
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
@@ -26,6 +26,11 @@ VERSION = "0.4"
--[[
ChangeLog:
+ version 0.6 2012-09-14 RDT
+ Add -1 (one-pass [pdf][la]tex processing) option.
+
+ version 0.5 2011-11-28 RDT
+ Add -i (retain intermediate files) option.
version 0.4 2011-04-30 RDT
Allow multiple filenames (and options).
@@ -49,6 +54,8 @@ function usage()
print(" -p pdfetex (or pdflatex)")
print(" -d dvipdfm")
print(" -s stop at dvi")
+ print(" -i retain intermediate files")
+ print(" -1 one-pass [pdf][la]tex processing")
print(" -f restore default processing")
end
@@ -66,7 +73,9 @@ end
tex = "etex"
musixflx = "musixflx"
dvi = "dvips"
-ps2pdf = "ps2pdf"
+ps2pdf = "/usr/local/bin/ps2pdf"
+intermediate = 1
+passes = 2
exit_code = 0
narg = 1
@@ -94,8 +103,12 @@ repeat
dvi = "dvipdfm"; ps2pdf = ""
elseif this_arg == "-s" then
dvi = ""; ps2pdf = ""
+ elseif this_arg == "-i" then
+ intermediate = 0
+ elseif this_arg == "-1" then
+ passes = 1
elseif this_arg == "-f" then
- tex = "etex"; dvi = "dvips"; ps2pdf = "ps2pdf"
+ tex = "etex"; dvi = "dvips"; ps2pdf = "ps2pdf"; intermediate = 1; passes = 2
else
filename = this_arg
if filename ~= "" and string.sub(filename, -4, -1) == ".tex" then
@@ -106,24 +119,27 @@ repeat
else
print("Processing ".. filename .. ".tex.")
os.remove( filename .. ".mx2" )
- if (os.execute(tex .. " " .. filename) == 0) and
- (os.execute(musixflx .. " " .. filename) == 0) and
+ if (passes == 1 or os.execute(tex .. " " .. filename) == 0) and
+ (passes == 1 or os.execute(musixflx .. " " .. filename) == 0) and
(os.execute(tex .. " " .. filename) == 0) and
((tex ~= "latex" and tex ~= "pdflatex")
or (os.execute(tex .. " " .. filename) == 0)) and
(dvi == "" or (os.execute(dvi .. " " .. filename) == 0)) and
(ps2pdf == "" or (os.execute(ps2pdf .. " " .. filename .. ".ps") == 0) )
- then -- clean-up:
- os.remove( filename .. ".mx1" )
- os.remove( filename .. ".mx2" )
- if dvi ~= "" then
- os.remove( filename .. ".dvi" )
- end
+ then
if ps2pdf ~= "" then
print(filename .. ".pdf generated by " .. ps2pdf .. ".")
- os.remove( filename .. ".ps" )
end
- print("")
+ if intermediate == 1 then -- clean-up:
+ os.remove( filename .. ".mx1" )
+ os.remove( filename .. ".mx2" )
+ if dvi ~= "" then
+ os.remove( filename .. ".dvi" )
+ end
+ if ps2pdf ~= "" then
+ os.remove( filename .. ".ps" )
+ end
+ end
else
print("Musixtex processing of " .. filename .. ".tex fails.\n")
exit_code = 2
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/ChangeLog b/Build/source/texk/texlive/linked_scripts/tetex/ChangeLog
deleted file mode 100644
index 7db3359c839..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/ChangeLog
+++ /dev/null
@@ -1,748 +0,0 @@
-2013-01-15 Karl Berry <karl@tug.org>
-
- * fmtutil.sh (run_initex): save log file first,
- even if the .fmt isn't built. Tweak message wordings.
- Report from tljack, 12 Jan 2013 14:35:16.
-
-2012-08-08 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * fmtutil*, tcfmgr*, texconfig*, texlinks* (removed):
- Moved from here to ../texlive/tetex/.
- * Makefile.am: Adapted; run-texlinks rule
-
-2012-08-07 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * tests/, all*, dvi2fax*, dvired*, fontinst*, kpsetool*,
- kpsewhere*, ps2frag*, pslatex*, rubibtex*, rumakeindex*,
- updmap* (removed): Moved from here to ../texlive/tetex/.
- * Makefile.am: Adapted.
-
-2012-08-06 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * e2pall.man, texdoctk.man, texdoctk.man (removed): Moved from
- here to ../texlive/tetex/.
- * Makefile.am: Adapted.
-
-2012-08-04 Karl Berry <karl@tug.org>
-
- * tl-sys-wrapper: not needed. The Windows wrapper, runscript.tlu,
- already handles -sys, as does the Windows fmtutil.c.
- * Makefile.am (EXTRA_DIST): remove it again.
-
-2012-08-03 Karl Berry <karl@tug.org>
-
- * tl-sys-wrapper.pl: initial attempt.
-
-2012-07-31 Norbert Preining <preining@logic.at>
-
- * updmap.pl (main): fix quoting and var expansion on Windows.
- * updmap.pl (main): and another fix, this time for PATH separator
-
-2012-07-30 Norbert Preining <preining@logic.at>
-
- * updmap.pl (main): support for multiple entry TEXMFLOCAL.
- Tell the user which config files is used for writing.
-
-2012-07-23 Karl Berry <karl@tug.org>
-
- * updmap.pl (help): we have both --showoption and --showoptions.
- Ugh. Found by Bruno Voisin, 11 Jun 2012 21:34:44.
-
-2012-06-10 Norbert Preining <preining@logic.at>
-
- * updmap.pl: fix ordering of how updmap.cfg files are read
- and add documentation.
-
-2012-06-04 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am (EXTRA_DIST): Add the new file updmap.help2man.
-
-2012-06-01 Karl Berry <karl@tug.org>
-
- * Makefile.am (xupdmap.man): new (phony) target to run help2man.
- * updmap.help2man: new file.
-
- * updmap.pl: consistently use $prg, and remove .pl suffix.
-
-2012-05-31 Karl Berry <karl@tug.org>
-
- * updmap.pl (reset_root_home): accept /var/root.
-
-2012-05-31 Norbert Preining <preining@logic.at>
-
- * updmap.pl: reset root $HOME if it is not the real one, since
- sudo does not reset it
-
-2012-05-21 Norbert Preining <preining@logic.at>
-
- * updmap.pl
- . on win32, ensure file names are in lower case
- . add --dvipdfmxoutputdir, make --dvipdfmoutputdir synonym
- (more or less)
- . make sure that the file name database is properly updated
- when creating a new config file
- . remove --old-mode cmd line option
-
-2012-05-15 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * updmap.pl: Moved from ../texlive/linked_scripts/texlive/
- back to here.
- * tests/ (new): Moved from ../texlive/ to here and adapted.
- * Makefile.am: Adapted.
-
-2012-05-14 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * tests/ (removed): Moved from here to ../texlive/.
- * Makefile.am: Adapted.
-
- * fmtutil.cnf: Updated from Master.
-
-2012-05-14 Norbert Preining <preining@logic.at>
-
- * updmap.pl: rename to updmap-single.pl, we ship updmap.pl now
- via ../texlive/linked_scripts/texlive/updmap.pl
-
-2012-04-10 Karl Berry <karl@tug.org>
-
- * fmtutil (main): eradicate double slashes in tmpdir.
- tex-k mail from Alexey Vikhlinin, 8 Apr 2012 17:32:02.
-
-2012-03-12 Karl Berry <karl@tug.org>
-
- * updmap.cfg.5: avoid ... at beginning of line.
- Replace Debian-specific text.
-
-2012-02-21 Karl Berry <karl@tug.org>
-
- * updmap.pl (help): updates for kanji.
-
-2012-02-10 Norbert Preining <preining@logic.at>
-
- * updmap.pl: fix breakage of updmap if a generated file does
- not exist (wrong double substitution of @kanji*@ strings)
-
-2012-02-01 Norbert Preining <preining@logic.at>
-
- * updmap.pl:
- . support -showoption key that shows the current setting
- . fix not-acceptance of empty values in key/val -setoption
-
-2012-01-19 Norbert Preining <preining@logic.at>
-
- * updmap.pl:
- . allow --enable Map foo.map again
- . support kanjiVariant options and replacement
-
-2011-12-12 Karl Berry <karl@tug.org>
-
- * updmap.pl: untabify, formatting.
-
-2011-12-06 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am: Replace ${prefix}/texmf => $(datarootdir)/texmf.
-
-2011-11-16 Norbert Preining <preining@logic.at>
-
- * updmap.pl: make sure that kanjiEmbed is set to a default value
- if not found in the config file.
-
-2011-11-09 Norbert Preining <preining@logic.at>
-
- * updmap.pl: add support for pxdviUse config option in updmap,
- and generate xdvi-ptex.map if it is set in a similar way as kanjix.map,
- patch based on work of Hironori Kitagawa
-
-2011-11-04 Norbert Preining <preining@logic.at>
-
- * updmap.pl: small fixes to documentation of updmap.pl, and fixes
- to --syncwithtrees and --listavail, patch from Hironori Kitagawa
-
-2011-11-02 Norbert Preining <preining@logic.at>
-
- * updmap.pl: apply patch from Hironori Kitagawa that fixes
- a --syncwithtrees problem in searching for map names.
-
-2011-10-26 Norbert Preining <preining@logic.at>
-
- * updmap.pl: apply patch from ptexlive Tsuchimura to support
- kanjiEmbed setting, and generate kanjix.map.
-
-2011-09-09 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am: Adapt to script_links.am using relpath.
- (run-texlinks): Declare as .PHONY; skip texlinks for WIN32.
-
-2011-09-09 Karl Berry <karl@tug.org>
-
- * tests: new subdir, with first updmap test, that doesn't really
- work yet but passes anyway.
- * Makefile.am (TESTS): add tests/updmap-cmdline-test.pl.
- * updmap.pl (read_option_vals): don't call getopt twice (from Norbert).
- Don't complain about non-option args, that is how --enable/--disable
- are currently (mis)handled.
- (writeLines, copyFile, setupOutputDir, SetupCfgFile): do nothing
- if $dry_run.
-
-2011-09-05 Karl Berry <karl@tug.org>
-
- * texconfig-dialog (runDialog): only clear screen if we actually
- run the dialog program.
- (findDialog): do not bother setting DIALOG_TERM and
- DIALOG_TERMINFO if we don't find a system dialog program,
- since we're just going to abort anyway.
- * texmf: remove subdir with terminfo definitions.
- * Makefile.am (texconfdir, nobase_dist_texconf_DATA): likewise rm.
-
-2011-09-04 Norbert Preining <preining@logic.at>
-
- * updmap.pl (BEGIN): older versions are supported again.
- (read_for_set_options): new fn.
- (processOptions): call it, so we call getopt twice,
- so we can avoid using the =s{1,2} specifier (for --setoption)
- which needs perl 5.8.8.
- Also, complain about non-option arguments.
- http://tug.org/pipermail/tex-live/2011-July/029764.html
- http://tug.org/pipermail/tex-k/2011-September/002329.html
-
-2011-08-26 Karl Berry <karl@tug.org>
-
- * texconfig-dialog: do not invoke tcdialog as fallback,
- give up instead. We don't want to install our own (tc)dialog any
- more, induces curses dependencies. More importantly, texconfig,
- and especially this interactive configuration, has not been the
- way we have been moving (or testing) for years now. If there is
- anyone left who wants to do it, they can install their own dialog
- (or whiptail) program.
-
-2011-06-27 Karl Berry <karl@tug.org>
-
- * fmtutil (version): rename to versionfunc, or Solaris sh dies
- with "bad substitution".
- Report from Nelson, 23 Jun 2011 09:42:09.
-
-2011-06-18 Karl Berry <karl@tug.org>
-
- * updmap.pl (locateMap): allow "Map foo" (without the ".map"),
- as the sh updmap map. (The actual file still being foo.map.)
- Report from Peter Dyballa, 15 Jun 2011 10:04:36.
-
-2011-06-16 Karl Berry <karl@tug.org>
-
- * updmap.pl (help): add more info and modify to work with help2man.
- * updmap.man: generate with help2man.
-
- * updmap.pl (progname): eliminate fn in favor of $0
- or hardwired "updmap" as appropriate.
-
- * old-updmap: rename from updmap, to make it clearer this
- (sh version) is not used any more.
- * old-fontinst.bat: rename from fontinst.bat.
-
- * updmap.pl ($pdftexStripEnc): set to zero.
- (to_pdftex): return the input, not empty.
- (ProcessOptions): accept and ignore dvipdfmoutputdir.
-
- * updmap.pl (@psADOBE): use the same list as from sh updmap,
- including the spaces, to be sure we are getting the same behavior.
-
- Related:
- * Master/texmf/fonts/map/dvips/tetex/pdftex35.map,
- * Master/texmf/fonts/map/dvips/tetex/ps2pk35.map (phvbo8rn,phvbo8yn):
- ever since at least TL 7, these have had
- spurious "-Narrow-BoldOblique" suffixes on the correct
- NimbusSanL-BoldCondItal, left over from the Adobe
- Helvetica-Narrow-BoldOblique.
- (Yet the fonts could still be used.)
- * Master/texmf/fonts/map/{dvips,pdftex}/updmap: regenerate.
-
- * updmap.pl: support --setoption foo bar as well as foo=bar,
- for compatibility.
- (setOptions): new fn.
- (ProcessOptions): use "setoption=s{1,2}" => \@setoptions
- instead of "setoption=s" => \%setOption, since we have to parse
- the values manually.
- (Getopt::Long::Configure): removing bundling, disallows the
- =s{1,2} Getopt directive we specify for parsing.
- Original report from Herbert Schulz,
- mactex mail 13 Jun 2011 07:56:50.
-
- Unrelated, sorry:
- Add $0 to die commands.
- (setOption): silently accept dvipdfmDownloadBase14.
- ($verbose): remove unused variable.
-
-2011-06-15 Karl Berry <karl@tug.org>
-
- * updmap.pl: reformat long lists, reduce ####, other formatting.
- (processOptions): do not mkdirhier the output directories
- if it is a dry run.
-
- * updmap.pl (@psADOBE): do BoldItalic (etc.) before Bold (etc.),
- other generated pdftex.map has bogus names with spaces.
- Original report from Herbert Schulz,
- mactex mail 13 Jun 2011 08:27:46.
-
- Unrelated, sorry:
- (Getopt::Long::Configure): set ignore_case_always.
- (Case-insensitive option matching is the default?!)
- (--force, $opt_force): new option.
- (processOptions): sort and indent option list consistently.
-
-2011-05-31 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am: Use ../am/bin_links.am for $(bindir) links.
-
-2011-05-12 Karl Berry <karl@tug.org>
-
- * updmap.pl (pdftexNoEnc): rename to pdftexStripEnc.
- (to_pdftex): change uses.
- (Reinhard K made an equivalent change.)
-
-2011-04-04 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- Rename updmap-sys => updmap-sys.sh.
- * Makefile.am: Install updmap and updmap-sys as linked scripts
- and use the ../am/script_links.am fragment.
-
-2011-02-08 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am: Use ../am/man1_links.am for manpage links.
-
-2011-01-07 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am, configure.ac [WIN32]: Install wrapper binary for
- fontinst (handled as alias by runscript.tlu).
-
- * texconfig, texconfig-sys: Drop texconfig_sys shell variable;
- now done via TEXMFVAR and TEXMFCONFIG in the environment.
-
-2011-01-04 Karl Berry <karl@tug.org>
-
- * updmap: add many more verbose messages, to help understand what
- files are being created from what sources.
-
-2010-12-27 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am (install-exec-hook, install-data-hook): Check
- symlink creation.
-
-2010-12-25 Karl Berry <karl@tug.org>
-
- * doc,
- * pdfetex-pl.pool,
- * README.a2ping: remove these seemingly not useful files.
- * Makefile.am: update accordingly.
-
-2010-12-22 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * configure.ac: Added KPSE_CHECK_WIN32.
- * context/ (removed): Files moved to ../texlive/context/.
- * Makefile.am: Adapted.
-
-2010-12-19 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * ps4pdf: Removed, replaced by newer version under ../texlive/.
- * Makefile.am: Adapted.
-
-2010-12-18 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * context/texmfstart.man: Fix typo.
-
-2010-07-05 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * fmtutil.man: Adapt to fmtutil.
-
-2010-07-04 Norbert Preining <preining@logic.at>
-
- * fmtutil: add --no-error-if-no-format, don't abort in some cases of
- missing formats
-
-2010-06-12 Karl Berry <karl@tug.org>
-
- * fmtutil (--edit): disable.
- (help): document this, other tweaks.
-
-2010-05-31 Manuel Pégourié-Gonnard <mpg@elzevir.fr>
-
- * fmtutil: allow more than one language file per format.
-
-2010-05-20 Karl Berry <karl@tug.org>
-
- * doc/TETEXDOC.dvi,
- * doc/TETEXDOC.ps: rm files.
- * doc/Makefile: do not bother remaking .dvi + .ps.
- * Makefile.am (dist_tetexdoc_DATA): rm.
-
-2010-04-29 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am (run_texlinks, run_texlinks): Respect DESTDIR.
-
-2010-04-28 Manuel Pégourié-Gonnard <mpg@elzevir.fr>
-
- * texlinks: Append exeext to engine names.
- * Makefile.am (run_texlinks): Invoke texlinks with explicit dir.
-
-2010-03-12 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * texlinks (version): Add missing quote in svn id.
-
-2010-03-11 Karl Berry <karl@tug.org>
-
- * updmap,
- * texlinks,
- * texconfig (version): use svn id.
- (help): regularize info at end of msg.
-
- * fmtutil (help): describe mktexfmt operation.
- (main): give more error message in mktexfmt mode.
- Report from Ludovic Courtes, 08 Mar 2010 21:55:53.
-
-2010-01-17 Karl Berry <karl@tug.org>
-
- * updmap,
- * fmtutil: tweak help messages.
-
- * tcfmgr (setupMap),
- * fmtutil (main),
- * updmap (setupCfgFile): maybe ls-R missing when basic config
- files not found.
-
-2009-12-23 Norbert Preining <preining@logic.at>
-
- * fmtutil: check for infinite loop only in mktexfmt mode so that
- multiple defined format/engine combinations are accepted.
-
-2009-10-24 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- * Makefile.am (bin_links, man1_links):
- New lists of symlinks within bindir and man1dir.
- Moved handling of texhash symlinks to ../kpathsea/man/.
- Moved handling of lambda, ctangle, cweave, odvicopy, odvitype,
- mf-nowin, and pdflatex symlinks to ../web2c/man/.
- (install-data-hook, install-exec-hook, uninstall-hook):
- Use `bin_links' and `man1_links'.
-
- * mkocp.man, mkofm.man, otp2ocp.man, outocp.man: Moved from
- here to ../web2c/otps/.
- * ofm2opl.man, opl2ofm.man, ovf2ovp.man, ovp2ovf.man,
- ttf2afm.man: Moved from here to ../web2c/man/.
- * Makefile.am (dist_man1_MANS): Adjusted.
-
-2009-10-09 Karl Berry <karl@tug.org>
-
- * fmtutil (run_initex): if it doesn't already exist, create
- mplib-luatex.mem when we create mpost.mem.
-
-2009-08-24 Reinhard Kotucha <reinhard.kotucha@web.de>
-
- * updmap.pl (mkMaps): replace dir/ls shell commands by Perl code.
-
-2009-08-22 Tomek Trzeciak <t.m.trzeciak@gmail.com>
-
- * updmap.pl (mkmaps): remove unneeded COMSPEC from backticks
-
-2009-08-19 Karl Berry <karl@tug.org>
-
- * updmap.pl (mkmaps): quote invocation of COMSPEC.
- From Dan Luecking, 19 Aug 2009 15:13:31.
-
-2009-08-15 Karl Berry <karl@tug.org>
-
- * fmtutil (--byengine): new option, from Norbert.
- (help): mention it; other tweaks.
- * fmtutil.man: also update.
-
-2009-07-23 Karl Berry <karl@tug.org>
-
- * updmap (help): mention tug.org/fonts/fontinstall.html.
-
-2009-06-23 Karl Berry <karl@tug.org>
-
- * Makefile.am (run_texlinks): add -e "$(EXEEXT)".
- * texlinks: new option -e to specify executable extension (for
- cygwin).
-
-2009-06-11 Norbert Preining <preining@logic.at>
-
- * fmtutil (log_warning): new fn, related code, so that
- LaTeX's five-year-old warning does not trigger failure.
- Debian bug #531595.
-
-2009-05-28 Karl Berry <karl@tug.org>
-
- * texconfig.man: update from Frank K, 27 May 2009 23:17:49.
-
-2009-05-07 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- Adapt to TL2009 build system.
-
-2009-04-03 Karl Berry <karl@tug.org>
-
- * Makefile.am (EXTRA_DIST): remove texdoc.man from list.
- * texdoc.man: remove file; maintained separately now
- (http://tug.org/texdoc)
-
-2009-03-17 Karl Berry <karl@tug.org>
-
- * updmap (main, cleanup): cd back to the original pwd instead of /,
- to work around
- rm: cannot get current directory: Permission denied
- error in (at least) coreutils 5.2.1 in some ill-defined circumstance.
- Report from Lars Madsen.
-
-2008-10-27 Karl Berry <karl@tug.org>
-
- * updmap.pl: also adjust printed output.
- From Aaron Chen, 25 Oct 2008 16:40:59.
-
-2008-10-24 Karl Berry <karl@tug.org>
-
- * Makefile.in (run-texlinks): quote the PATH
- argument in case there are spaces lurking.
- Report from Angelo Graziosi, 23 Oct 2008 16:08:59.
-
-2008-10-22 Karl Berry <karl@tug.org>
-
- * updmap.pl (cfgval): only consider falsish strings to be 0, else
- leave the value as-is, for the sake of LW35, which does not take a
- boolean. Report and patch from Aaron Chen, 17 Oct 2008 01:22:24.
-
-2008-09-22 Karl Berry <karl@tug.org>
-
- * fmtutil (parse_line): pass --format=mp to kpsewhich when
- engine=mpost, instead of --format=mpost.
-
-2008-07-08 Karl Berry <karl@tug.org>
-
- * texconfig (hyphen, formats): disable these functions,
- fmtutil.cnf and language.dat/def must not be manually edited,
- since they are now automatically regenerated, as tlmgr regenerates.
-
-2008-07-05 Karl Berry <karl@tug.org>
-
- * Makefile.in (run_texlinks): use -f $(web2cdir)/fmtutil.cnf.
- (run_mktexlsr): no longer needed.
- From Francois Charette, tldistro 04 Jul 2008 09:22:42.
-
-2008-06-18 Karl Berry <karl@tug.org>
-
- * texlinks: metafun is not created specially by ConTeXt, so we'll
- create it here.
-
-2008-06-17 Norbert Preining <preining@logic.at>
-
- * fmtutil: add the engine setting to the infinite-loop-detection
- variable.
-
-2008-06-15 Karl Berry <karl@tug.org>
-
- * Makefile.in (run_mktexlsr): no need to set TEXMFDBS, cmdline
- dir is respected again.
- (CONTEXTSCRIPTS): remove texexec, the version here was old.
-
-2008-05-28 Karl Berry <karl@tug.org>
-
- * fmtutil.cnf: new file, a slave of Master/texmf/web2c/fmtutil.cnf,
- which we keep in sync via TL infrastructure scripts.
- * Makefile.in (install-data): install fmtutil.cnf.
- (run-texlinks): new target, invoked by top-level make.
- * texlinks: doc fixes.
-
-2008-05-19 Karl Berry <karl@tug.org>
-
- * texdoc: remove, master is now the lua version in texmf/scripts.
-
-2008-05-11 Norbert Preining <preining@logic.at>
-
- * Makefile.in: do not install texdoc(.man) since we will use the
- texlua version from Frank (to be found in ../texlive)
-
-2008-05-08 Norbert Preining <preining@logic.at>
-
- * updmap, tcfmgr: quote various calls containing env variables
- taken from texmf.cnf which could contain spaces
-
-2008-05-05 Karl Berry <karl@tug.org>
-
- * texconfig (generate): remove this, now done in tlmgr.
-
-2008-05-04 Karl Berry <karl@tug.org>
-
- * Makefile.in (LINKED_SCRIPTS): add ps4pdf.
-
-2008-04-25 Karl Berry <karl@tug.org>
-
- * Makefile.in (LINKED_SCRIPTS): now tlmgr.tlu.
-
-2008-04-16 Norbert Preining <preining@logic.at>
-
- * fmtutil: fix creation of dirs with spaces
-
-2008-04-14 Karl Berry <karl@tug.org>
-
- * Makefile.in (LINKED_SCRIPTS): no more *xindy, the xindy Makefile
- itself takes care of those.
-
-2008-04-12 Karl Berry <karl@tug.org>
-
- * Makefile.in (LINKED_SCRIPTS): pdfcrop now in texmf-dist.
- Add xindy.pl, texindy.pl.
-
-2008-03-18 Karl Berry <karl@tug.org>
-
- * Makefile.in (install-linked-scripts): use $(LINKSUFFIX).
- (LINKSUFFIX): new variable, for passing -sys.
- (install-linked-sys-scripts): make install-linked-scripts
- instead of repeating code.
-
-2008-03-15 Reinhard Kotucha <reinhard.kotucha@web.de>
-
- * Makefile.in (LINKEDSCRIPTS): add pdfthumb.
-
-2008-03-14 Reinhard Kotucha <reinhard.kotucha@web.de>
-
- * Makefile.in (LINKED_SYS_SCRIPTS): new list for -sys progs.
- Add getnonfreefonts.pl.
-
-2008-03-14 Karl Berry <karl@tug.org>
-
- * Makefile.in (LINKEDSCRIPTS): add ppower4, no longer in tetex.
-
- * fmtutil: check for infinite loops.
- From Stepan Kasal, http://bugzilla.redhat.com/show_bug.cgi?id=437008.
-
-2008-03-07 Karl Berry <karl@tug.org>
-
- * Makefile.in (LINKEDPLSCRIPTS): rename from LINKEDPERLSCRIPTS.
- (LINKEDNOEXTSCRIPTS): new variable for makeglossaries.
- (install-linkedscripts): install them.
-
-2008-03-03 Karl Berry <karl@tug.org>
-
- * latex.info, latex2e.texi: remove; this will become a separate
- package.
- * Makefile.in: remove info-related stuff.
- (LINKEDPERLSCRIPTS): add e2pall, pkfix, ps2eps.
-
-2008-03-02 Karl Berry <karl@tug.org>
-
- * Makefile.in: more doc
-
-2008-02-16 Karl Berry <karl@tug.org>
-
- * texconfig (doGenerate): new fn to call generate-* scripts.
- (help): document it.
-
-2008-01-30 Peter Breitenlohner <peb@mppmu.mpg.de>
-
- Convert from autoconf-2.13 to autoconf-2.59+:
- * Makefile.in: Add @configure_input@ line.
- * aclocal.m4 (new): Generated (aclocal -I ../m4).
- * configure: Regenerated (autoconf).
-
-2008-01-14 Karl Berry <karl@tug.org>
-
- * pdfcrop: update to 1.8 from CTAN.
-
-2007-11-03 Karl Berry <karl@tug.org>
-
- * texlinks.man: --unlink, sort. From Edd.
-
-2007-10-25 Karl Berry <karl@tug.org>
-
- * updmap: make last bit of log nicer, since we may have copies
- instead of symlinks now.
-
-2007-10-24 Karl Berry <karl@tug.org>
-
- * texconfig: update and augment help message;
- accept version and --version;
- show TeX Live version info from release-texlive.txt.
-
-2007-10-19 Karl Berry <karl@tug.org>
-
- * updmap (processOptions): add --copy and -n options.
- (setupSymlinks): with --copy, cp instead of ln -s.
- We want this for TL.
- (mkMaps): with -n, exit before actually doing anything.
- (setupLog): with -n, do not log.
- (help): update and augment.
-
-2007-10-12 Karl Berry <karl@tug.org>
-
- * texlinks: new option -u[nlink] for uninstall.
- From Edd Barrett, 10 Oct 2007 11:05:55.
-
-2007-09-30 Karl Berry <karl@tug.org>
-
- * texconfig-sys: export texconfig_sys.
- * texconfig <init>: use it to figure out which fmtutil/updmap.
- Report from Frank K, 11 Jun 2007 17:05:43.
-
-2007-09-10 Karl Berry <karl@tug.org>
-
- * updmap.pl: TEXMFVAR rather than VARTEXMF.
-
-2007-09-04 Karl Berry <karl@tug.org>
-
- * updmap.pl: ! to clearly check against both empty string and
- undef, rather than eq undef (Jjgod 3 Sep 2007 16:16:50).
-
-2007-07-16 Karl Berry <karl@tug.org>
-
- * texconfig (findDialogProg, runDialog): these fns not used here,
- remove.
- (findprog): new mode of operation, like which(1).
- * texconfig-dialog (findDialog): check for whiptail/dialog on any
- system, not just FreeBSD, Linux, cygwin.
-
-2007-05-31 Karl Berry <karl@tug.org>
-
- * fmtutil (run_initex): do not remove the log file.
-
-2007-01-16 Karl Berry <karl@tug.org>
-
- * texconfig (init): only run texlinks and updmap if fmtutil succeeds.
-
-2007-01-14 Karl Berry <karl@tug.org>
-
- * texconfig: check for pdftex rather than pdfetex.
- Reported by Artemio, 13 Jan 2007 14:54:40.
-
-2006-12-29 Karl Berry <karl@tug.org>
-
- * texconfig: replace sort +1 with sort -k 2. I hate POSIX.
- Reported by gnwiii, 28 Dec 2006 14:53:54.
-
-2006-12-27 Karl Berry <karl@tug.org>
-
- * Makefile.in (install-exec): now the binary is named pdftex again.
-
-2006-12-25 Karl Berry <karl@tug.org>
-
- * updmap: update version.
-
-2006-12-13 Karl Berry <karl@tug.org>
-
- * latex2e.texi: FSF never held copyright (checked with authors).
- Starting latexrefman project at gna.org, with hopes.
-
-2006-11-20 Karl Berry <karl@tug.org>
-
- * Makefile.in (CONTEXTSCRIPTS): new variable.
- (context): new subdir of stubs, updated from Hans' releases.
-
-2006-11-14 Karl Berry <karl@tug.org>
-
- * updmap (normalizeLines): remove CR characters (for skaknew), so
- that the generted map files have consistent line endings for svn.
-
-2006-07-13 Karl Berry <karl@tug.org>
-
- * ps4pdf (tmpdir): don't lose check for TMPDIR and TEMP which te
- had.
-
-Sat Dec 18 14:19:43 CET 1999 te
-
- * added manpages for epstopdf and dvi2fax (contributed by "James
- R. Van Zandt" <jrv@vanzandt.mv.com>)
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/allcm.1 b/Build/source/texk/texlive/linked_scripts/tetex/allcm.1
deleted file mode 100644
index fe75f4ef6d3..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/allcm.1
+++ /dev/null
@@ -1,28 +0,0 @@
-.TH allcm 1 "11/94" "teTeX" "teTeX"
-.SH NAME
-allcm \- force the most important Computer\-Modern\-fonts to be calculated
-.SH SYNOPSIS
-.B allcm [-r]
-.SH DESCRIPTION
-.I allcm
-forces a large number of Computer Modern Fonts to be calculated as pixel files.
-This is done through running
-.IR dvips (1)
-over a certain test-file. Therefore, the fonts are created in the resolution
-needed by dvips.
-
-If the \-r flag is specified, the command
-.IR dvired (1)
-will be used instead of dvips.
-
-.I allcm
-does not recalculate existing fonts (as long as the Metafont mode does not change).
-
-.SH "SEE ALSO"
-allec(1),
-allneeded(1),
-dvips(1),
-dvired(1).
-
-.SH AUTHOR
-Thomas Esser <te@dbs.uni-hannover.de>
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/allcm.sh b/Build/source/texk/texlive/linked_scripts/tetex/allcm.sh
deleted file mode 100755
index 945c7c88457..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/allcm.sh
+++ /dev/null
@@ -1,118 +0,0 @@
-#!/bin/sh
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-progname=`basename $0`
-tmpdir=${TMPDIR-${TEMP-${TMP-/tmp}}}/$progname.$$
-
-case "$progname" in
- allec)
- encoding=T1;;
- *)
- encoding=OT1;;
-esac
-
-case "$1" in
- -r)
- DVIPS=dvired
- shift
- ;;
- *)
- DVIPS=dvips
- ;;
-esac
-
-body()
-{
- cat <<-'eof'
- \pagestyle{empty}
- \parindent0in
- \hfuzz=\maxdimen
- \hbadness=10000
- \textheight9.5in
- \textwidth6.5in
- \newcommand{\myformula}{\sum a_{b_{c_d}} = c}
- \newcommand{\mytext}{text $\mathcal{\myformula}\mathrm{\myformula}
- \mathbf{\myformula}\mathsf{\myformula}\mathtt{\myformula}
- \mathnormal{\myformula}\mathit{\myformula}$}
-
- \newcommand{\TestSizes}{{%
- \tiny \mytext\scriptsize \mytext\footnotesize \mytext\small \mytext
- \normalsize \mytext
- \large \mytext\Large \mytext\LARGE \mytext\huge \mytext\Huge \mytext}}
- \newcommand{\TestRM}{rm-family: {\rmfamily\TestSizes}\newline}
- \newcommand{\TestSF}{sf-family: {\sffamily\TestSizes}\newline}
- \newcommand{\TestTT}{tt-family: {\ttfamily\TestSizes}\newline}
- \newcommand{\TestFamilies}{\TestRM\TestSF\TestTT\newline}
- \newcommand{\TestMD}{md-series: {\mdseries\TestFamilies}}
- \newcommand{\TestBF}{bf-series: {\bfseries\TestFamilies}}
- \newcommand{\TestSeries}{\TestBF\TestMD\par}
- \newcommand{\TestUP}{up-shape: {\upshape\TestSeries}\par}
- \newcommand{\TestIT}{it-shape: {\itshape\TestSeries}\par}
- \newcommand{\TestSL}{sl-shape: {\slshape\TestSeries}\par}
- \newcommand{\TestSC}{sc-shape: {\scshape\TestSeries}\par}
- \newcommand{\TestShapes}{\TestUP\TestIT\TestSL\TestSC}
- \begin{document}
- \TestShapes
- \end{document}
-eof
-}
-
-head()
-{
- echo '\documentclass['$1'pt]{article}'
- echo '\usepackage['$encoding']{fontenc}'
-}
-
-# before we create the tmpdir, set trap for cleanup
-trap '
- rm -rf $tmpdir
- exit 1
-' 1 2 3 7 13 15
-
-(umask 077; mkdir "$tmpdir") || {
- echo "$progname: failed to create temp directory." >&2
- exit 1
-}
-
-cd $tmpdir || exit 1
-echo >&2
-echo "---------------------------------------------------------------------" >&2
-echo ">>>>>>>>>>> Generating testfiles for 10pt, 11pt and 12pt. <<<<<<<<<<" >&2
-echo "---------------------------------------------------------------------" >&2
-head 10 > allcm10.tex
-head 11 > allcm11.tex
-head 12 > allcm12.tex
-body >> allcm10.tex
-body >> allcm11.tex
-body >> allcm12.tex
-
-echo >&2
-echo "---------------------------------------------------------------------" >&2
-echo ">>>>>>>>>>> Calling latex... <<<<<<<<<<" >&2
-echo "---------------------------------------------------------------------" >&2
-latex allcm10 >/dev/null
-latex allcm11 >/dev/null
-latex allcm12 >/dev/null
-
-echo >&2
-echo "---------------------------------------------------------------------" >&2
-echo ">>>>>>>>>>> Now, calling $DVIPS to make missing fonts... <<<<<<<<<<" >&2
-echo "---------------------------------------------------------------------" >&2
-$DVIPS ${1+"$@"} -V -f allcm10 > /dev/null
-$DVIPS ${1+"$@"} -V -f allcm11 > /dev/null
-$DVIPS ${1+"$@"} -V -f allcm12 > /dev/null
-
-cd /
-rm -rf $tmpdir
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/allec.1 b/Build/source/texk/texlive/linked_scripts/tetex/allec.1
deleted file mode 100644
index 56bf87a60c5..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/allec.1
+++ /dev/null
@@ -1,28 +0,0 @@
-.TH alldc 1 "11/94" "teTeX" "teTeX"
-.SH NAME
-allec \- force the most important ec\-fonts to be calculated
-.SH SYNOPSIS
-.B allec [\-r]
-.SH DESCRIPTION
-.I allec
-forces a large number of ec-style Fonts to be calculated as pixel files.
-This is done through running
-.IR dvips (1)
-over a certain test-file. Therefore, the fonts are created in the resolution
-needed by dvips.
-
-If the \-r flag is specified, the command
-.IR dvired (1)
-will be used instead of dvips.
-
-.I alldc
-does not recalculate existing fonts (as long as the Metafont mode does not change).
-
-.SH "SEE ALSO"
-allcm(1),
-allneeded(1),
-dvips(1),
-dvired(1).
-
-.SH AUTHOR
-Thomas Esser <te@dbs.uni-hannover.de>
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/allneeded.1 b/Build/source/texk/texlive/linked_scripts/tetex/allneeded.1
deleted file mode 100644
index 7d9a67548b7..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/allneeded.1
+++ /dev/null
@@ -1,30 +0,0 @@
-.TH allneeded 1 "11/94" "teTeX" "teTeX"
-.SH NAME
-allneeded \- force the calculation of all fonts now needed
-.SH SYNOPSIS
-.B allneeded [\-r] files ...
-.SH DESCRIPTION
-.I allneeded
-forces the calculation of all fonts that are needed to preview a set of
-dvi files. Just specify where the program should search for files on the
-commandline.
-The fonts generation is triggered by running
-.IR dvips (1)
-over all accessible dvi\-files. Therefore, the fonts are created in the resolution
-needed by dvips.
-
-If the \-r flag is specified, the command
-.IR dvired (1)
-will be used instead of dvips.
-
-.I allneeded
-does not recalculate existing fonts (as long as the Metafont mode does not change).
-
-.SH "SEE ALSO"
-allec(1),
-allcm(1),
-dvips(1),
-dvired(1).
-
-.SH AUTHOR
-Thomas Esser <te@dbs.uni-hannover.de>
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/allneeded.sh b/Build/source/texk/texlive/linked_scripts/tetex/allneeded.sh
deleted file mode 100755
index 15c62c84adb..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/allneeded.sh
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/sh
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-progname=`basename $0`
-dvired=false
-
-case $1 in
--r) DVIPS="dvips -x707"
- shift;;
-*) DVIPS=dvips;;
-esac
-
-case $# in
-0) echo "Usage: $progname [-r] files ..." >&2
- exit ;;
-esac
-
-findopt=
-dvipsopt=
-
-for i
-do
- if [ -f $i ] || [ -d $i ]; then
- findopt="$findopt $i"
- else
- dvipsopt="$dvipsopt $i"
- fi
-done
-
-find $findopt -name \*.dvi -type f -print |
- while true; do
- read i
- test -z "$i" && exit
- echo "processing file '$i' ..."
- $DVIPS $dvipsopt -f "$i" >/dev/null
- echo
- done
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.1 b/Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.1
deleted file mode 100644
index f7c436d6e33..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.1
+++ /dev/null
@@ -1,22 +0,0 @@
-.TH DVI2FAX 1 "October 30, 1999"
-.\" man page by Jim Van Zandt <jrv@vanzandt.mv.com> -*- nroff -*-
-.SH NAME
-dvi2fax \- convert a TeX DVI file to G3 fax format
-.SH SYNOPSIS
-\fBdvi2fax\fP [\fB-hi\fP|\fB-lo\fP] \fIfile\fP[.dvi] [\fIoptions for dvips\fP]
-.SH DESCRIPTION
-\fBdvi2fax\fP uses \fBdvips\fP(1) to convert a TeX DVI file to PostScript,
-then \fBgs\fP(1) to convert the PostScript to G3 fax file format.
-.SH OPTIONS
-.LP
-.B -hi
-use high fax resolution (204x196 dpi) (default).
-.LP
-.B -lo
-use low fax resolution (204x98).
-.PP
-\fBdvips\fP options can follow the file name.
-.SH EXAMPLE
-Example: dvi2fax foo -l 2
-.SH SEE ALSO
-\fBdvips\fP(1), \fBgs\fP(1).
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.sh b/Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.sh
deleted file mode 100755
index fdfa83211eb..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/dvi2fax.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-# options for dvips are passwd down
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-progname=`basename "$0"`
-help()
-{
- echo "Usage: $progname [-hi|-lo] file[.dvi] [options for dvips]"
- echo " -hi: use high fax resolution (204x196) (default)"
- echo " -lo: use low fax resolution (204x98)"
- echo
- echo "Example: $progname foo -l 2"
-}
-
-dvipsconf=dfaxhigh; gsdev=dfaxhigh
-case $1 in
- -hi) gsdev=dfaxhigh; shift;;
- -lo) gsdev=dfaxlow; shift;;
-esac
-
-case $# in
- 0) help >&2
- exit 1
- ;;
-esac
-
-NAME=`basename "$1" .dvi`
-dvips "$@" -P$dvipsconf -f |
- gs -q -dSAFER -sDEVICE=$gsdev -sOutputFile="$NAME-%03d.fax" -sNOPAUSE -
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/dvired.1 b/Build/source/texk/texlive/linked_scripts/tetex/dvired.1
deleted file mode 100644
index f76e58087a3..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/dvired.1
+++ /dev/null
@@ -1,63 +0,0 @@
-.TH dvired 1 "09/94" "teTeX" "teTeX"
-.SH NAME
-dvired \- print dvi-files
-.SH SYNOPSIS
-.B dvired
-[
-.B options
-]
-.B file
-.SH DESCRIPTION
-.I dvired
-behaves like
-.IR dvips ,
-except for the fact that two logical pages are put onto each physical
-sheet of paper.
-
-For
-.IR options ,
-see
-.IR dvips (1).
-This program only interprets the following options:
-
-.I \-o file
-\- redirect output into
-.I file.
-
-.I \-P printer
-\- direct output to
-.I printer.
-
-.I \-f
-\- direct output to stdout.
-
-Any other option is passed directly to
-.IR dvips .
-
-.SH EXAMPLES
-It is assumed that the PRINTER-variable is set.
-
-.B dvired \-Plw foo
-\- send output to printer
-.IR lw .
-.br
-.B dvired \-o foo.ps foo
-\- send output to file
-.IR foo.ps .
-.br
-.B dvired \-pp4-7 foo
-\- send 4 pages (reduced onto 2 sheets) of
-.I foo
-to the printer.
-.br
-.B dvired foo \-f | ghostview \-
-\- preview output with ghostview.
-
-.SH "SEE ALSO"
-.IR dvips (1)
-.SH BUGS
-.I dvired
-is fixed on A4 paper size. If you want to use it with other paper, you have
-to change the settings within the source.
-.SH AUTHOR
-Thomas Esser <te@dbs.uni-hannover.de>
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/dvired.sh b/Build/source/texk/texlive/linked_scripts/tetex/dvired.sh
deleted file mode 100755
index 4eb3586119d..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/dvired.sh
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh
-#==============================================================================
-# Version: 0.3
-# Module: dvired
-# Purpose: Translate dvi-file into postscript with reduced output size.
-# Two logical pages will be put on onto each physical sheet of
-# paper.
-# System: Linux. UNIX(tm) systems may work as well :-)
-# Requires: pstops (http://www.dcs.ed.ac.uk/home/ajcd/psutils/), dvips
-# Created: 19.11.1992
-# Last Change: 13.08.1999
-# Language: sh
-# Author: Thomas Esser
-# Address: te@dbs.uni-hannover.de
-# Copyright: (c) 1994, 1999 by Thomas Esser
-# Copying: GNU GENERAL PUBLIC LICENSE
-#==============================================================================
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-help()
-{
- cat <<eof
-
-Usage: dvired [options] file
-
-This programm behaves like dvips, execpt fot the fact that two logical
-pages will be put on onto each physical sheet of paper.
-
-For options see dvips(1). This program only interprets the options
--o, -P and -f. All other options will directly be passed to dvips.
-
-If your paper is not in A4 format, you need to adjust the dimensions
-in this program.
-
-Examples: (it is assumed that the PRINTER-variable is set)
- dvired -Plw foo send output to printer lw
- dvired -o foo.ps foo send output to file foo.ps
- dvired -pp4-7 foo send 4 output-pages to printer
- dvired foo -f | ghostview - preview output with ghostview
-eof
-}
-
-case $# in
-0) help ; exit 1 ; ;;
-esac
-
-# This will work for A4 paper.
-paper=a4 ; pstopsopt='2:0(7.44mm,7.44mm)+1(7.44mm,-141.06mm)'
-
-# The following are *UNTESTED*. Please let me know whether they work
-# or not, if you can test them.
-#paper=a3 ; pstopsopt='2:0(7.44mm,7.44mm)+1(7.44mm,-202.56mm)'
-#paper=letter ; pstopsopt='2:0(7.44mm,7.44mm)+1(7.44mm,-132.26mm)'
-#paper=legal ; pstopsopt='2:0(7.44mm,7.44mm)+1(7.44mm,-170.36mm)'
-#paper=ledger ; pstopsopt='2:0(7.44mm,7.44mm)+1(7.44mm,-132.26mm)'
-#paper=tabloid ; pstopsopt='2:0(7.44mm,7.44mm)+1(7.44mm,-208.46mm)'
-
-of=""
-lpr_opt=""
-
-case "$PRINTER" in
-"") dvips_pre="" ;;
-*) dvips_pre="-P$PRINTER" ;;
-esac
-
-dvips_pre="$dvips_pre -t $paper -t landscape"
-
-while [ ! -z "$1" ] ; do
- case $1 in
- -P) of="" ; dvips_pre="$dvips_pre -P$2" ; lpr_opt="-P$2"
- shift ;;
- -P*) of="" ; dvips_pre="$dvips_pre $1" ; lpr_opt="$1" ;;
- -o) of="$2"
- shift ;;
- -o*) of="`echo $1| sed 's/..//'`" ;;
- -f) of="-" ;;
- *) opt="$opt $1"
- esac
- shift
-done
-
-case "$of" in
-"") dvips -x707 $dvips_pre $opt -f | pstops -q $pstopsopt | lpr $lpr_opt
- ;;
-"-") dvips -x707 $dvips_pre $opt -f | pstops -q $pstopsopt
- ;;
-*) dvips -x707 $dvips_pre $opt -f | pstops -q $pstopsopt > "$of"
- ;;
-esac
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/e2pall.1 b/Build/source/texk/texlive/linked_scripts/tetex/e2pall.1
deleted file mode 100644
index b102568b53a..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/e2pall.1
+++ /dev/null
@@ -1,55 +0,0 @@
-.TH "e2pall" "1" "August 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-e2pall \- convert all EPS files in a LaTeX document to PDF
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBe2pall\fP \fITEXFILE\fP
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBe2pall\fP searches through \fITEXFILE\fP for \eincludegraphics
-commands to find the base names of image files\&. When it finds one,
-\fBe2pall\fP runs \fBepstopdf\fP(1) to create a PDF file from the EPS
-file\&.
-.PP
-\fBe2pall\fP will check to be sure that an existing PDF file is
-up-to-date with the EPS file, and will not run \fBepstopdf\fP(1) if
-the PDF file is newer than the EPS file\&.
-.PP
-.SH "BUGS"
-.PP
-.IP ""
-Seems to be broken
-.IP ""
-Cannot handle \einput{\fIfilename\fP} or
-\eincludegraphics{\fIfilename\fP} split over more than one
-line
-.IP ""
-Must be run from same directory as the LaTeX file
-.IP ""
-Does not look down $TEXINPUTS
-.IP ""
-Cannot handle documents that use \einclude commands
-.IP ""
-Assumes \fIall\fP files included with \eincludegraphics are EPS
-files
-.IP
-.PP
-.SH "SEE ALSO"
-.PP
-\fBepstopdf\fP(1)
-.PP
-.SH "AUTHOR"
-.PP
-\fBe2pall\fP was written by Jody Klymak <jklymak@apl\&.washington\&.edu> and published in a posting to
-the <pdftex@tug\&.org> (mailing list)\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/e2pall.pl b/Build/source/texk/texlive/linked_scripts/tetex/e2pall.pl
deleted file mode 100755
index 2997f8b1102..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/e2pall.pl
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/usr/bin/env perl
-
-# Author: Jody Klymak <jklymak@apl.washington.edu>, publisted by a posting
-# to the pdftex mailinglist.
-
-# recursively finds all your eps files. Looks down \input{fname}.
-# CAVEATS:
-# 1) cannot handle \input{fname} split over more than one line.
-# 1.5) cannot handle multiple \input{} or \includegraphics{} on one line.
-# 2) Must be run from same directory as the Latex file.
-# 3) Does not look down $TEXINPUTS or anything fancy like that...
-# 4) Handling of \include is untested (though I guess its trivial)
-# 5) Assumes *all* your graphics inclusions are [e]ps. But don't
-# fret, because if they are not epstopdf dies anyhow....
-# 6) Does not distinguish between percent (\%) and comment (%).
-
-# Changelog:
-# 20030103 -- Lachlan Andrew <lha@users.sourceforge.net>
-# * Only append '.tex' if $fname doesn't exist.
-# * Correctly handle lines with '}' after the \includegraphics{}
-# * Allow multiple extensions for graphics files. .eps -> .ps -> none
-# (Should try them in the same order as \includegraphics does
-# -- given by \DeclareGraphicsExtensions{}?)
-# * Allow \include the same way as \input
-# * Allow \includegraphics{} to be split over multiple lines
-# * Check that commands begin with '\', and allow spaces before arguments
-
-# EDIT these two lines for your system....
-
-$Eps2PdfCom = "epstopdf";
-$ThisFunCom = "e2pall";
-
-$fname=$ARGV[0];
-
-# check for a *.tex at the end...
-if ((-f "$fname")=="" && $fname !~ /.tex$/){
- $fname = "$fname.tex";
-}
-
-open(TEXFILE,$fname) or die "Cannot open file $fname";
-# print "Finding *.eps files in $fname\n";
-
-$seekingArg = 0;
-while($line=<TEXFILE>){
- # truncate $line after % sign....
- $line=~s/%.*//;
- # check for /input....
- if ($line=~/\\input *{([^}]*)}/){
- print `$ThisFunCom $1`;
- }
- # check for /include....
- if ($line=~/\\include *{([^}]*)}/){
- print `$ThisFunCom $1`;
- }
-
- $base = "";
- if ($line=~/\\includegraphics.*{([^}]*)}/){
- $base = $1;
- }
- elsif ($seekingArg==1 && ($line=~/{([^}]*)}/)){
- $base = $1;
- }
- elsif ($line=~/\\includegraphics/){
- $seekingArg = 1;
- }
-
- if ($base ne "") {
- $seekingArg = 0;
- if ((-f "$base.eps")!="") {
- $srcfile = "$base.eps";
- }
- elsif ((-f "$base.ps")!=""){
- $srcfile = "$base.ps";
- }
- else {
- $srcfile = $base;
- }
- # check that the [e]ps version is newer than the pdf version....
- if ((-M "$base.pdf")=="" || (-M "$base.pdf") >= (-M "$srcfile")){
- print "Constructing \t $base.pdf from $srcfile\n";
- print `$Eps2PdfCom $srcfile`;
- }
- else{
- print "$base.pdf \t is up to date with $srcfile\n";
- }
-
- };
-}
-close(TEXFILE);
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil-sys.sh b/Build/source/texk/texlive/linked_scripts/tetex/fmtutil-sys.sh
deleted file mode 100755
index bfb52f94e1f..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil-sys.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# fmtutil-sys: Thomas Esser, public domain.
-
-# wrapper script for fmtutil with TEXMFVAR and TEXMFCONFIG set to
-# TEXMFSYSVAR / TEXMFSYSCONFIG
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-export PATH
-
-v=`kpsewhich -var-value TEXMFSYSVAR`
-c=`kpsewhich -var-value TEXMFSYSCONFIG`
-
-TEXMFVAR="$v"
-TEXMFCONFIG="$c"
-export TEXMFVAR TEXMFCONFIG
-
-exec fmtutil ${1+"$@"}
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.1 b/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.1
deleted file mode 100644
index 39ed57bf8b5..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.1
+++ /dev/null
@@ -1,113 +0,0 @@
-.TH FMTUTIL 1 "June 2011" "TeX Live" "TeX Live"
-.SH "NAME"
-fmtutil \- utility for maintaining TeX format files
-.PP
-fmtutil-sys \- utility for maintaining TeX format files system\-wide
-.SH "SYNOPSIS"
-.B fmtutil\fP
-.RI [ OPTION .\|.\|.]
-.I COMMAND
-.PP
-.B fmtutil-sys
-.RI [ OPTION .\|.\|.]
-.I COMMAND
-.SH "DESCRIPTION"
-\fBfmtutil\fP is used to create or recreate format and hyphenation
-files or show information about format files\&.
-.PP
-\fICOMMAND\fP is one of:
-.PP
-.TP
-.B --all
-recreate all format files
-.TP
-.BI --byengine \ enginename
-(re)create formats that depend on the
-engine \fIenginename\fP
-.TP
-.BI --byfmt \ formatname
-(re)create the format for
-format \fIformatname\fP
-.TP
-.BI --byhyphen \ hyphenfile
-(re)create formats that depend on the
-hyphenation file \fIhyphenfile\fP
-.TP
-.B --catcfg
-output the content of the config file
-.TP
-.BI --disablefmt \ formatname
-disable
-.I formatname
-in config file
-.TP
-.B --edit
-no-op in TeX Live
-.TP
-.BI --enablefmt \ formatname
-ensable
-.I formatname
-in config file
-.TP
-.B --help
-print a summary of commands and options
-.TP
-.B --listcfg
-list (enabled and disabled) configurations, filtered to available formats
-.TP
-.B --missing
-create all missing format files
-.TP
-.B --refresh
-recreate only existing format files
-.TP
-.BI --showhyphen \ formatname
-print the name of the
-hyphenation file for the format
-\fIformatname\fP
-.TP
-.B --version
-show version info
-.SH "OPTIONS"
-.TP
-.BI --cnffile \ file
-specify the configuration
-\fIfile\fP \fBfmtutil\fP should use
-.TP
-.B --dolinks
-(not implemented, just for compatibility)
-.TP
-.BI --fmtdir \ directory
-set the destination
-directory for format files generated by
-\fBfmtutil\fP to \fIdirectory\fP
-.TP
-.B --force
-(not implemented, just for compatibility)
-.TP
-.B --no-engine-subdir
-don't use engine-specific subdir of the fmtdir
-.TP
-.B --no-error-if-no-format
-exit successfully if no format is selected
-.TP
-.B --quiet
-be silent
-.TP
-.B --test
-(not implemented, just for compatibility)
-.SH "FILES"
-.TP
-.I fmtutil\&.cnf
-default configuration file
-.SH "SEE ALSO"
-.BR kpsewhich (1)
-.SH "BUGS"
-None known, but report any bugs found to <tex-k@tug.org> (mailing list).
-.SH "AUTHOR"
-\fBfmtutil\fP was written by Thomas Esser
-<te@dbs\&.uni-hannover\&.de> and is in the public domain.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system and later slightly adapted for the teTeX 3 release\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf b/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf
deleted file mode 100644
index 8e1ab82149f..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf
+++ /dev/null
@@ -1,126 +0,0 @@
-# Generated by /home/texlive/karl/Master/bin/i386-linux/tlmgr on Mon May 14 04:46:13 2012
-# $Id: fmtutil-hdr.cnf 13067 2009-05-12 22:04:17Z preining $
-# Originally written by Thomas Esser, 1998. Public domain.
-#
-# As of TeX Live 2008, the final fmtutil.cnf is generated by
-# tlmgr generate fmtutil. You can use
-# tlmgr generate fmtutil -localcfg /some/file to make local additions.
-# See tlmgr --help for more info.
-#
-# The format of the table is:
-#
-# format engine pattern-file arguments
-#
-# The last "argument" must be the name of the file on which to run
-# the ini-engine (such as initex). If the ini-engine is e-TeX, and the
-# e-TeX extensions should be enabled, the filename must be prefixed with
-# a * character.
-#
-# fmtutil always passes the -ini option to the engine.
-# If no pattern-file is desired, use -.
-# Either spaces or tabs can be used as separators.
-#
-# Other notes:
-# 1) tex and amstex just load hyphen.tex. No customization.
-# You can have your own customized (via babel's hyphen.cfg)
-# formats on top of plain by using "bplain.tex" instead of
-# plain.tex (see e.g. bplain.ini file for bplain format).
-#
-# 2) etex-based formats load language.def, not language.dat.
-#
-# 3) The symbolic link to the right engines (e.g. bplain -> tex)
-# is generated by the "texlinks" script.
-#
-# 4) usual comments start with "# ", whereas disabled configurations
-# start with "#! " in this file.
-
-#
-# from aleph:
-aleph aleph - *aleph.ini
-lamed aleph language.dat *lambda.ini
-#
-# from amstex:
-amstex pdftex - -translate-file=cp227.tcx *amstex.ini
-#
-# from context:
-cont-en pdftex cont-usr.tex -8bit *cont-en.ini
-cont-en xetex cont-usr.tex -8bit *cont-en.ini
-#! cont-de pdftex cont-usr.tex -8bit *cont-de.ini
-#! cont-fr pdftex cont-usr.tex -8bit *cont-fr.ini
-#! cont-it pdftex cont-usr.tex -8bit *cont-it.ini
-#! cont-nl pdftex cont-usr.tex -8bit *cont-nl.ini
-#! cont-ro pdftex cont-usr.tex -8bit *cont-ro.ini
-#
-# from cslatex:
-cslatex pdftex - -etex -translate-file=cp227.tcx cslatex.ini
-pdfcslatex pdftex - -etex -translate-file=cp227.tcx cslatex.ini
-#
-# from csplain:
-csplain pdftex - -etex -translate-file=cp227.tcx csplain.ini
-pdfcsplain pdftex - -etex -translate-file=cp227.tcx csplain.ini
-#
-# from eplain:
-eplain pdftex language.dat -translate-file=cp227.tcx *eplain.ini
-#
-# from jadetex:
-jadetex pdftex language.dat *jadetex.ini
-pdfjadetex pdftex language.dat *pdfjadetex.ini
-#
-# from latex-bin:
-latex pdftex language.dat -translate-file=cp227.tcx *latex.ini
-pdflatex pdftex language.dat -translate-file=cp227.tcx *pdflatex.ini
-dvilualatex luatex language.dat,language.dat.lua dvilualatex.ini
-lualatex luatex language.dat,language.dat.lua lualatex.ini
-#
-# from luatex:
-luatex luatex language.def,language.dat.lua luatex.ini
-dviluatex luatex language.def,language.dat.lua dviluatex.ini
-#
-# from metafont:
-mf mf-nowin - -translate-file=cp227.tcx mf.ini
-#
-# from mex:
-mex pdftex mexconf.tex -translate-file=cp227.tcx *mex.ini
-pdfmex pdftex mexconf.tex -translate-file=cp227.tcx *pdfmex.ini
-utf8mex pdftex mexconf.tex -enc *utf8mex.ini
-#
-# from mltex:
-mllatex pdftex language.dat -translate-file=cp227.tcx -mltex mllatex.ini
-mltex pdftex - -translate-file=cp227.tcx -mltex mltex.ini
-#
-# from mptopdf:
-mptopdf pdftex - -translate-file=cp227.tcx mptopdf.tex
-#
-# from pdftex:
-pdftex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
-etex pdftex language.def -translate-file=cp227.tcx *etex.ini
-pdfetex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
-#
-# from ptex:
-ptex ptex - ptex.ini
-eptex eptex language.def *eptex.ini
-platex eptex language.dat *platex.ini
-#
-# from t2:
-#! cyramstex pdftex language.dat -translate-file=cp227.tcx *cyramstx.ini
-#! cyrtex pdftex language.dat -translate-file=cp227.tcx *cyrtex.ini
-#! cyrtexinfo pdftex language.dat -translate-file=cp227.tcx *cyrtxinf.ini
-#
-# from tex:
-tex tex - tex.ini
-#
-# from texsis:
-texsis pdftex - -translate-file=cp227.tcx texsis.ini
-#
-# from uptex:
-uptex uptex - uptex.ini
-euptex euptex language.def *euptex.ini
-uplatex euptex language.dat *uplatex.ini
-#
-# from xetex:
-xetex xetex language.def -etex xetex.ini
-xelatex xetex language.dat -etex xelatex.ini
-#
-# from xmltex:
-xmltex pdftex language.dat *xmltex.ini
-pdfxmltex pdftex language.dat *pdfxmltex.ini
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf.5 b/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf.5
deleted file mode 100644
index 4efedcf590c..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.cnf.5
+++ /dev/null
@@ -1,77 +0,0 @@
-.TH "fmtutil\&.cnf" "5" "October 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-fmtutil\&.cnf \- configuration file for fmtutil
-.PP
-.SH "DESCRIPTION"
-.PP
-The \fIfmtutil\&.cnf\fP file contains the configuration information
-for \fBfmtutil\fP(8)\&. Each line contains the name of the format
-(e\&.g\&., ``tex\'\', ``latex\'\', ``omega\'\'), the name of the engine that
-is used by that format (e\&.g\&., ``tex\'\', ``etex\'\', ``omega\'\'), the pattern
-file (e\&.g\&., \fIlanguage\&.dat\fP, \fIlanguage\&.def\fP), and any
-arguments (name of an \fI\&.ini\fP file)\&.
-.PP
-Fields are separated by whitespace\& and complete lines can be commented
-out with ``#\'\'\&. The ``pattern file\'\' field cannot be used to
-define a file that is used while building the format\&.
-It tells \fBfmtutil\fP which files (separated by commas) the
-format creation procedure reads\& and it has an effect to the options
-\fI--showhyphen\fP and \fI--byhyphen\fP\&.
-If the format has no way to
-customize hyphenation, a ``-\'\' can be used to indicate this\&.
-.PP
-.SH "NOTES"
-.PP
-The \fBtex\fP(1) and \fBamstex\fP(1) formats always load
-\fIhyphen\&.tex\fP\&. No customization by a pattern file is available
-for these formats\&. Therefore, the pattern-file field for the
-\fBtex\fP and \fBamstex\fP is usually indicated to be empty (``-\'\')\&.
-.PP
-You can, however, build customized formats on top of plain
-\fBtex\fP(1) or \fBamstex\fP(1) by using \fIbplain\&.tex\fP instead of
-\fIplain\&.tex\fP (b for the \fIBabel\fP system). See, for example,
-the \fIbplain\&.ini\fP file for the bplain format)\&.
-.PP
-\fBetex\fP(1) loads \fIlanguage\&.def\fP, not
-\fIlanguage\&.dat\fP\&.
-.PP
-Symbolic links to the correct engines (e\&.g\&., bplain -> tex)
-are generated by the \fBtexlinks\fP(8) script\&. Remember to run
-\fBtexlinks\fP(8) if you run \fBfmtutil\fP(8) yourself, rather
-than using the FORMATS option in \fBtexconfig\fP(8)\&.
-.PP
-.SH "FILES"
-.PP
-.IP "\fIfmtutil\&.cnf\fP"
-default configuration file
-.IP "\fIlanguage\&.dat\fP"
-hyphenation pattern file
-.IP "\fIlanguage\&.def\fP"
-hyphenation pattern file
-.IP "\fIlanguage\&.dat.lua\fP"
-hyphenation pattern file
-.PP
-.SH "SEE ALSO"
-.PP
-\fBamstex\fP(1), \fBetex\fP(1), \fBfmtutil\fP(8),
-\fBtex\fP(1), \fBtexconfig\fP(8), \fBtexlinks\fP(8)\&.
-.PP
-Web page: <http://tug\&.org/teTeX/>
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to <tetex@dbs\&.uni-hannover\&.de> (mailing list)\&.
-.PP
-.SH "AUTHOR"
-.PP
-\fIfmtutil\&.cnf\fP was written by Thomas Esser
-<te@dbs\&.uni-hannover\&.de>, and is Copyright 1998,
-1999 but released into the public domain\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.sh b/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.sh
deleted file mode 100755
index b9f97aa8998..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fmtutil.sh
+++ /dev/null
@@ -1,1017 +0,0 @@
-#!/bin/sh
-# fmtutil - utility to maintain format files.
-# Public domain. Originally written by Thomas Esser.
-# Run with --help for usage.
-
-# program history:
-# further changes in texk/tetex/ChangeLog.
-# 2007-01-04 patch by JK to support $engine subdir (enabled by default)
-# Fr Apr 8 19:15:05 CEST 2005 cleanup now has an argument for the return code
-# Do Mar 02 10:42:31 CET 2006 add tmpdir to TEXFORMATS
-# So Ma 27 18:52:06 CEST 2005 honor $TMPDIR, $TEMP and $TMP, not just $TMP
-# Sa Jan 15 18:13:46 CET 2005 avoid multiple variable assignments in one statement
-# Di Jan 11 11:42:36 CET 2005 fix --byhyphen with relative hyphenfile
-# Fr Dez 31 16:51:29 CET 2004 option catcfg added (for being called by texconfig)
-# Do Dez 30 21:53:27 CET 2004 rename variable verbose to verboseFlag
-# Sa Dez 25 12:44:23 CET 2004 implementation adopted for teTeX-3.0 (tcfmgr)
-# Do Okt 28 11:09:36 CEST 2004 added --refresh
-# Fr Sep 17 19:25:28 CEST 2004 save $0 in a variable before calling a function
-# Sun May 9 23:24:06 CEST 2004 changes for new web2c: format names
-# are now *.fmt, nothing else, disable
-# "plain" symlinks
-# Thu May 6 14:16:19 CEST 2004: "mv ...</dev/null" to avoid interaction.
-# Sun Mar 21 19:44:36 CET 2004: support aleph
-# Thu Dec 25 22:11:53 CET 2003: add version string
-# Thu Dec 25 12:56:14 CET 2003: new listcfg_loop lists only supported formats
-# Sun Dec 21 10:25:37 CET 2003 "mktexfmt pdflatex" did not work (if called
-# as mktexfmt, an extention was mandatory)
-# Mon Sep 15 13:07:31 CEST 2003 add tmpdir to TEXINPUTS
-# Sun Aug 3 11:09:46 CEST 2003 special case for mptopdf
-# Sun Apr 20 10:27:09 CEST 2003 allow " " as well as tab in config file
-# Wed Feb 19 21:14:52 CET 2003 add eomega support
-# Sat Feb 15 22:01:35 CET 2003 let mf-nowin work without mf
-# Wed Dec 25 09:47:44 CET 2002 bugfix for localized pool files
-# Fri Oct 25 02:29:06 CEST 2002: now more careful about find_hyphenfile()
-# Tue Oct 22 22:46:48 CEST 2002: -jobname, oft extension
-# Fri Oct 4 22:33:17 CEST 2002: add more cli stuff: enablefmt
-# disablefmt listcfg
-# Sun Jul 7 21:28:37 CEST 2002: look at log file for possible problems,
-# and issue a warning
-# Tue Jun 4 21:52:57 CEST 2002: trap / cleanup code from updmap
-# Tue Jun 4 19:32:44 CEST 2002: be smarter about stdout / stderr
-# Tue Apr 9 22:46:34 CEST 2002: pass -progname=mpost for metafun
-# Tue Apr 2 00:37:39 CEST 2002: added mktexfmt functionality
-# Tue Jun 5 14:45:57 CEST 2001: added support for mf / mpost
-###############################################################################
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-progname=fmtutil
-argv0=$0
-version='$Id$'
-
-cnf=fmtutil.cnf # name of the config file
-export PATH
-
-###############################################################################
-# cleanup()
-# clean up the temp area and exit with proper exit status
-###############################################################################
-cleanup()
-{
- rc=$1
- # for debugging, exit $rc here so $tmpdir with its logs sticks around.
- $needsCleanup && test -n "$tmpdir" && test -d "$tmpdir" \
- && { cd / && rm -rf "$tmpdir"; }
- (exit $rc); exit $rc
-}
-
-###############################################################################
-# help() and version()
-# display help (or version) message and exit
-###############################################################################
-help()
-{
- cat <<eof
-$version
-Usage: fmtutil [OPTION]... CMD [ARG]...
-Usage: mktexfmt FORMAT.fmt|BASE.base|MEM.mem|FMTNAME.EXT
-
-Rebuild and manage TeX formats, Metafont bases and MetaPost mems.
-
-If the command name ends in mktexfmt, only one format can be created.
-The only options supported are --help and --version, and the command
-line must consist of either a format name, with its extension, or a
-plain name that is passed as the argument to --byfmt (see below). The
-full name of the generated file (if any) is written to stdout, and
-nothing else.
-
-If not operating in mktexfmt mode, the command line can be more general,
-and multiple formats can be generated, as follows.
-
-Optional behavior:
- --cnffile FILE read FILE instead of fmtutil.cnf.
- --fmtdir DIRECTORY
- --no-engine-subdir don't use engine-specific subdir of the fmtdir
- --no-error-if-no-format exit successfully if no format is selected
- --quiet be silent
- --test (not implemented, just for compatibility)
- --dolinks (not implemented, just for compatibility)
- --force (not implemented, just for compatibility)
-
-Valid commands for fmtutil:
- --all recreate all format files
- --missing create all missing format files
- --refresh recreate only existing format files
- --byengine ENGINENAME (re)create formats using ENGINENAME
- --byfmt FORMATNAME (re)create format for FORMATNAME
- --byhyphen HYPHENFILE (re)create formats that depend on HYPHENFILE
- --enablefmt FORMATNAME enable formatname in config file
- --disablefmt FORMATNAME disable formatname in config file
- --listcfg list (enabled and disabled) configurations,
- filtered to available formats
- --catcfg output the content of the config file
- --showhyphen FORMATNAME print name of hyphenfile for format FORMATNAME
- --edit no-op in TeX Live
- --version show version info
- --help show this message
-
-The default config file is named fmtutil.cnf, and
-running kpsewhich fmtutil.cnf should show the active file.
-The command kpsewhich --engine=/ --all foo.fmt should show the
-locations of any and all foo.fmt files.
-
-For more information about fmt generation in TeX Live, try
-tlmgr --help or see http://tug.org/texlive/doc/tlmgr.html.
-The \`generate' action in tlmgr does the work.
-
-Report bugs to: tex-k@tug.org
-TeX Live home page: <http://tug.org/texlive/>
-eof
- cleanup 0
-}
-
-versionfunc()
-{
- cat <<eof
-$progname version $version
-eof
- cleanup 0
-}
-
-###############################################################################
-# setupTmpDir()
-# set up a temp directory and a trap to remove it
-###############################################################################
-setupTmpDir()
-{
- $needsCleanup && return
-
- trap 'cleanup 1' 1 2 3 7 13 15
- needsCleanup=true
- (umask 077; mkdir "$tmpdir") \
- || abort "could not create directory \`$tmpdir'"
-}
-
-###############################################################################
-# configReplace(file, pattern, line)
-# The first line in file that matches pattern gets replaced by line.
-# line will be added at the end of the file if pattern does not match.
-###############################################################################
-configReplace()
-{
- file=$1; pat=$2; line=$3
-
- if grep "$pat" "$file" >/dev/null; then
- ed "$file" >/dev/null 2>&1 <<-eof
- /$pat/
- c
- $line
- .
- w
- q
-eof
- else
- echo "$line" >> $file
- fi
-}
-
-###############################################################################
-# setmatch(match)
-# setting the "match state" to true or false. Used to see if there was at
-# least one match.
-###############################################################################
-setmatch()
-{
- match=$1
-}
-
-###############################################################################
-# getmatch()
-# return success if there was at least one match.
-###############################################################################
-getmatch()
-{
- test "x$match" = xtrue
-}
-
-###############################################################################
-# initTexmfMain()
-# get $MT_TEXMFMAIN from $TEXMFMAIN
-###############################################################################
-initTexmfMain()
-{
- case $MT_TEXMFMAIN in
- "") MT_TEXMFMAIN=`kpsewhich --var-value=TEXMFMAIN`;;
- esac
- export MT_TEXMFMAIN
-}
-
-###############################################################################
-# cache_vars()
-# locate files / kpathsea variables and export variables to environment
-# this speeds up future calls to e.g. mktexupd
-###############################################################################
-cache_vars()
-{
- : ${MT_VARTEXFONTS=`kpsewhich --expand-var='$VARTEXFONTS' | sed 's%^!!%%'`}
- : ${MT_MKTEXNAM=`kpsewhich --format='web2c files' mktexnam`}
- : ${MT_MKTEXNAM_OPT=`kpsewhich --format='web2c files' mktexnam.opt`}
- : ${MT_MKTEXDIR=`kpsewhich --format='web2c files' mktexdir`}
- : ${MT_MKTEXDIR_OPT=`kpsewhich --format='web2c files' mktexdir.opt`}
- : ${MT_MKTEXUPD=`kpsewhich --format='web2c files' mktexupd`}
- : ${MT_MKTEX_CNF=`kpsewhich --format='web2c files' mktex.cnf`}
- : ${MT_MKTEX_OPT=`kpsewhich --format='web2c files' mktex.opt`}
- export MT_VARTEXFONTS MT_MKTEXNAM MT_MKTEXNAM_OPT MT_MKTEXDIR
- export MT_MKTEXDIR_OPT MT_MKTEXUPD MT_MKTEX_CNF MT_MKTEX_OPT
-}
-
-###############################################################################
-# abort(errmsg)
-# print `errmsg' to stderr and exit with error code 1
-###############################################################################
-abort()
-{
- echo "$progname: $1." >&2
- cleanup 1
-}
-
-###############################################################################
-# maybe_abort(errmsg)
-# print `errmsg' to stderr and
-# unless noAbortFlag is set exit with error code 1
-###############################################################################
-maybe_abort()
-{
- echo "$progname: $1." >&2
- $noAbortFlag || cleanup 1
-}
-
-###############################################################################
-# verboseMsg(msg)
-# print `msg' to stderr is $verbose is true
-###############################################################################
-verboseMsg() {
- $verboseFlag && verbose echo ${1+"$@"}
-}
-
-###############################################################################
-# byebye()
-# report any failures and exit the program
-###############################################################################
-byebye()
-{
- if $has_warnings; then
- {
- cat <<eof
-
-###############################################################################
-$progname: Warning! Some warnings have been issued.
-Visit the log files in directory
- $destdir
-for details.
-###############################################################################
-
-This is a summary of all \`warning' messages:
-$log_warning_msg
-eof
- } >&2
- fi
-
- if $has_errors; then
- {
- cat <<eof
-
-###############################################################################
-$progname: Error! Not all formats have been built successfully.
-Visit the log files in directory
- $destdir
-for details.
-###############################################################################
-
-This is a summary of all \`failed' messages:
-$log_failure_msg
-eof
- } >&2
- cleanup 1
- else
- cleanup 0
- fi
-}
-
-###############################################################################
-# init_log_warning()
-# reset the list of warning messages
-###############################################################################
-init_log_warning()
-{
- log_warning_msg=
- has_warnings=false
-}
-
-###############################################################################
-# init_log_failure()
-# reset the list of failure messages
-###############################################################################
-init_log_failure()
-{
- log_failure_msg=
- has_errors=false
-}
-
-###############################################################################
-# log_warning(errmsg)
-# report and save warning message `errmsg'
-###############################################################################
-log_warning()
-{
- echo "Warning: $@" >&2
- if test -z "$log_warning_msg"; then
- log_warning_msg="$@"
- else
- OLDIFS=$IFS; IFS=
- log_warning_msg="$log_warning_msg
-$@"
- IFS=$OLDIFS
- fi
- has_warnings=true
-}
-
-###############################################################################
-# log_failure(errmsg)
-# report and save failure message `errmsg'
-###############################################################################
-log_failure()
-{
- echo "Error: $@" >&2
- if test -z "$log_failure_msg"; then
- log_failure_msg="$@"
- else
- OLDIFS=$IFS; IFS=
- log_failure_msg="$log_failure_msg
-$@"
- IFS=$OLDIFS
- fi
- has_errors=true
-}
-
-###############################################################################
-# verbose (cmd)
-# execute cmd. Redirect output depending on $mktexfmtMode.
-###############################################################################
-verbose()
-{
- $mktexfmtMode && ${1+"$@"} >&2 || ${1+"$@"}
-}
-
-###############################################################################
-# mktexdir(args)
-# call mktexdir script, disable all features (to prevent sticky directories)
-###############################################################################
-mktexdir()
-{
- initTexmfMain
- MT_FEATURES=none "$MT_TEXMFMAIN/web2c/mktexdir" "$@" >&2
-}
-
-###############################################################################
-# tcfmgr(args)
-# call tcfmgr script
-###############################################################################
-tcfmgr()
-{
- initTexmfMain
- "$MT_TEXMFMAIN/texconfig/tcfmgr" "$@"
-}
-
-###############################################################################
-# mktexupd(args)
-# call mktexupd script
-###############################################################################
-mktexupd()
-{
- initTexmfMain
- "$MT_TEXMFMAIN/web2c/mktexupd" "$@"
-}
-
-###############################################################################
-# main()
-# parse commandline arguments, initialize variables,
-# switch into temp. direcrory, execute desired command
-###############################################################################
-main()
-{
- destdir= # global variable: where do we put the format files?
- cnf_file= # global variable: full name of the config file
- cmd= # desired action from command line
- needsCleanup=false
- need_find_hyphenfile=false
- cfgparam=
- cfgmaint=
- verboseFlag=true
- noAbortFlag=false
- # eradicate double slashes to avoid kpathsea expansion.
- tmpdir=`echo ${TMPDIR-${TEMP-${TMP-/tmp}}}/$progname.$$ | sed s,//,/,g`
-
- # mktexfmtMode: if called as mktexfmt, set to true. Will echo the
- # first generated filename after successful generation to stdout then
- # (and nothing else), since kpathsea can only deal with one.
- mktexfmtMode=false
- case $argv0 in
- mktexfmt|*/mktexfmt)
- mktexfmtMode=true
- fullfmt=$1; shift
- case $fullfmt in
- ""|--help) help ;;
- --version) versionfunc ;;
- --*) abort "unknown option $fullfmt, try --help" ;;
- *.fmt|*.mem|*.base)
- set x --byfmt `echo $fullfmt | sed 's@\.[a-z]*$@@'` ${1+"$@"}
- shift
- ;;
- *.*) abort "unknown format type: $fullfmt" ;;
- *) set x --byfmt $fullfmt; shift ;;
- esac
- ;;
- esac
-
- use_engine_dir=true # whether to use web2c/$engine subdirs
- while
- case $1 in
- --cnffile)
- shift; cnf_file=$1; cfgparam=1;;
- --cnffile=*)
- cnf_file=`echo "$1" | sed 's/--cnffile=//'`; cfgparam=1; shift ;;
- --fmtdir)
- shift; destdir=$1;;
- --fmtdir=*)
- destdir=`echo "$1" | sed 's/--fmtdir=//'`; shift ;;
- --no-engine-subdir)
- use_engine_dir=false;;
- --all|-a)
- cmd=all;;
- --edit|-e)
- cmd=edit; cfgmaint=1;;
- --missing|-m)
- cmd=missing;;
- --refresh|-r)
- cmd=refresh;;
- --byengine)
- shift; cmd=byengine; arg=$1;;
- --byengine=*)
- cmd=byengine; arg=`echo "$1" | sed 's/--byengine=//'`; shift ;;
- --byfmt|-f)
- shift; cmd=byfmt; arg=$1;;
- --byfmt=*)
- cmd=byfmt; arg=`echo "$1" | sed 's/--byfmt=//'`; shift ;;
- --byhyphen|-h)
- shift; cmd=byhyphen; arg=$1;;
- --byhyphen=*)
- cmd=byhyphen; arg=`echo "$1" | sed 's/--byhyphen=//'`; shift ;;
- --showhyphen|-s)
- shift; cmd=showhyphen; arg=$1;;
- --showhyphen=*)
- cmd=showhyphen; arg=`echo "$1" | sed 's/--showhyphen=//'`; shift ;;
- --help|-help)
- cmd=help;;
- --version)
- cmd=version;;
- --enablefmt)
- shift; cmd=enablefmt; arg=$1; cfgmaint=1;;
- --enablefmt=*)
- cmd=enablefmt; arg=`echo "$1" | sed 's/--enablefmt=//'`; cfgmaint=1; shift;;
- --disablefmt)
- shift; cmd=disablefmt; arg=$1; cfgmaint=1;;
- --disablefmt=*)
- cmd=disablefmt; arg=`echo "$1" | sed 's/--disablefmt=//'`; cfgmaint=1; shift;;
- --catcfg)
- cmd=catcfg;;
- --listcfg)
- cmd=listcfg;;
- --no-error-if-no-format)
- noAbortFlag=true;;
- --quiet|-q|--silent)
- verboseFlag=false;;
- --test|--dolinks|--force)
- ;;
- "") break;;
- *) abort "unknown option \`$1'; try $progname --help if you need it";;
- esac
- do test $# -gt 0 && shift; done
-
- case "$cmd" in
- "") abort "missing command; try $progname --help if you need it";;
- help) help;;
- version) versionfunc;;
- esac
-
- if test -n "$cfgparam"; then
- test -f "$cnf_file" || abort "config file \`$cnf_file' not found (ls-R missing?)"
- fi
-
- if test -n "$cfgmaint"; then
- if test -z "$cfgparam"; then
- setupTmpDir
- co=`tcfmgr --tmp $tmpdir --cmd co --file $cnf`
- test $? = 0 || cleanup 1
- set x $co; shift
- id=$1; cnf_file=$3; orig=$4
- verboseMsg "$progname: initial config file is \`$orig'"
- fi
- else
- if test -z "$cfgparam"; then
- cnf_file=`tcfmgr --cmd find --file $cnf`
- test -f "$cnf_file" || abort "config file \`$cnf' not found"
- fi
- fi
-
- # these commands need no temp directory, so do them here:
- case "$cmd" in
- catcfg)
- grep -v '^ *#' "$cnf_file" | sed 's@^ *@@; s@ *$@@' | grep . | sort
- cleanup $? ;;
- edit)
- echo "$0: fmtutil --edit is disabled in TeX Live;" >&2
- echo "$0: use a file fmtutil-local.cnf instead." >&2
- echo "$0: See tlmgr --help or http://tug.org/texlive/doc/tlmgr.html." >&2
- cleanup 0 ;;
- enablefmt|disablefmt)
- $cmd $arg ;; # does not return
- listcfg)
- listcfg_loop
- cleanup $? ;;
- showhyphen)
- show_hyphen_file "$arg"
- cleanup $? ;;
- esac
-
- if test -n "$cfgmaint"; then
- if test -z "$cfgparam"; then
- ci=`tcfmgr --tmp $tmpdir --cmd ci --id $id`
- if test $? = 0; then
- if test -n "$ci"; then
- verboseMsg "$progname: configuration file updated: \`$ci'"
- else
- verboseMsg "$progname: configuration file unchanged."
- fi
- else
- abort "failed to update configuration file."
- fi
- fi
- cleanup $?
- fi
-
- # set up destdir:
- if test -z "$destdir"; then
- : ${MT_TEXMFVAR=`kpsewhich -var-value=TEXMFVAR`}
- destdir=$MT_TEXMFVAR/web2c
- fi
- test -d "$destdir" || mktexdir "$destdir" >/dev/null 2>&1
- test -d "$destdir" || abort "format directory \`$destdir' does not exist"
- test -w "$destdir" || abort "format directory \`$destdir' is not writable"
-
- thisdir=`pwd`
-
- : ${KPSE_DOT=$thisdir}
- export KPSE_DOT
-
- # due to KPSE_DOT, we don't search the current directory, so include
- # it explicitly for formats that \write and later on \read
- TEXINPUTS="$tmpdir:$TEXINPUTS"; export TEXINPUTS
- # for formats that load other formats (e.g., jadetex loads latex.fmt),
- # add the current directory to TEXFORMATS, too. Currently unnecessary
- # for MFBASES and MPMEMS.
- TEXFORMATS="$tmpdir:$TEXFORMATS"; export TEXFORMATS
-
- setupTmpDir
- cd "$tmpdir" || cleanup 1
-
- # make local paths absolute:
- case "$destdir" in
- /*) ;;
- *) destdir="$thisdir/$destdir";;
- esac
- case "$cnf_file" in
- /*) ;;
- *) cnf_file="$thisdir/$cnf_file";;
- esac
-
- cache_vars
- init_log_failure
- init_log_warning
- # execute the desired command:
- case "$cmd" in
- all)
- recreate_all;;
- missing)
- create_missing;;
- refresh)
- recreate_existing;;
- byengine)
- recreate_by_engine "$arg";;
- byfmt)
- recreate_by_fmt "$arg";;
- byhyphen)
- recreate_by_hyphenfile "$arg";;
- esac
-
- byebye
-}
-
-###############################################################################
-# parse_line(config_line) sets global variables:
-# format: name of the format, e.g. pdflatex
-# engine: name of the TeX engine, e.g. tex, etex, pdftex
-# texargs: flags for initex and name of the ini file (e.g. -mltex frlatex.ini)
-# fmtfile: name of the format file (without directory, but with extension)
-#
-# Support for building internationalized formats sets:
-# pool: base name of pool file (to support translated pool files)
-# tcx: translation file used when creating the format
-#
-# Example (for fmtutil.cnf):
-# mex-pl tex mexconf.tex nls=tex-pl,il2-pl mex.ini
-#
-# The nls parameter (pool,tcx) can only be specified as the first argument
-# inside the 4th field in fmtutil.cnf.
-#
-# exit code: returns error code if the ini file is not installed
-###############################################################################
-parse_line()
-{
- case $1 in
- '#!') disabled=true; shift;;
- *) disabled=false;;
- esac
- format=$1
- engine=$2
- hyphenation=$3
- shift; shift; shift
-
- # handle nls support: pool + tcx
- pool=; tcx=
- case $1 in
- nls=*)
- pool=`echo $1 | sed 's@nls=@@; s@,.*@@'`
- tcx=`echo $1 | sed 's@nls=[^,]*@@; s@^,@@'`
- shift # nls stuff is not handled by the engine directly,
- # so we shift this away
- ;;
- esac
-
- texargs="$@"
-
- case "$engine" in
- mpost) fmtfile="$format.mem"; kpsefmt=mp; texengine=metapost;;
- mf|mfw|mf-nowin) fmtfile="$format.base"; kpsefmt=mf; texengine=metafont;;
- *) fmtfile="$format.fmt"; kpsefmt=tex; texengine=$engine;;
- esac
-
- # remove any * for the sake of the kpsewhich lookup.
- eval lastarg=\$$#
- inifile=`echo $lastarg | sed 's%^\*%%'`
-
- # See if we can find $inifile for return code:
- kpsewhich -progname=$format -format=$kpsefmt $inifile >/dev/null 2>&1
-}
-
-###############################################################################
-# find_hyphenfile(format, hyphenation) searches for hyphenation along
-# searchpath of format
-# exit code: returns error is file is not found
-###############################################################################
-find_hyphenfile()
-{
- format="$1"; hyphenation="`echo $2 | sed 's/,/ /g'`"
- case $hyphenation in
- -) ;;
- *) kpsewhich -progname="$format" -format=tex $hyphenation;;
- esac
-}
-
-###############################################################################
-# find_info_for_name(format)
-# Look up the config line for format `format' and call parse_line to set
-# global variables.
-###############################################################################
-find_info_for_name()
-{
- format="$1"
-
- # set x `awk '$1 == format {print; exit}' format="$format" "$cnf_file"`; shift
- set x `egrep "^$format( | )" "$cnf_file" | sed q`; shift
- test $# = 0 && abort "no info for format \`$format'"
- parse_line "$@"
-}
-
-###############################################################################
-# run_initex()
-# Calls initex. Assumes that global variables are set by parse_line.
-###############################################################################
-run_initex()
-{
-
- # install a pool file and set tcx flag if requested in lang= option:
- rm -f *.pool
- poolfile=
- tcxflag=
- test -n "$pool" \
- && poolfile=`(kpsewhich -progname=$engine $pool.pool) 2>/dev/null`
- if test -n "$poolfile" && test -f "$poolfile"; then
- verboseMsg "$progname: attempting to create localized format using pool=$pool and tcx=$tcx."
- cp "$poolfile" $engine.pool
- test -n "$tcx" && tcxflag=-translate-file=$tcx
- localpool=true
- else
- localpool=false
- fi
-
- jobswitch="-jobname=$format"
- case "$format" in
- metafun) prgswitch=-progname=mpost;;
- mptopdf|cont-??) prgswitch=-progname=context;;
- *) prgswitch=-progname=$format;;
- esac
-
- rm -f $fmtfile
-
- # Check for infinite recursion before running the iniTeX:
- # We do this check only if we are running in mktexfmt mode
- # otherwise double format definitions will create an infinite loop, too
- $mktexfmtMode || mktexfmt_loop=
- case :$mktexfmt_loop: in
- *:"$format/$engine":*)
- abort "Infinite recursion detected, giving up!" ;;
- esac
- mktexfmt_loop=$mktexfmt_loop:$format/$engine
- export mktexfmt_loop
-
- verboseMsg "$progname: running \`$engine -ini $tcxflag $jobswitch $prgswitch $texargs' ..."
-
- # run in a subshell to get a local effect of TEXPOOL manipulation:
- (
- # If necessary, set TEXPOOL. Use absolute path, because of KPSE_DOT.
- $localpool && { TEXPOOL="`pwd`:$TEXPOOL"; export TEXPOOL; }
- verbose $engine -ini $tcxflag $jobswitch $prgswitch $texargs
- ) </dev/null
-
- if test $use_engine_dir; then
- fulldestdir="$destdir/$texengine"
- else
- fulldestdir="$destdir"
- fi
- mkdir -p "$fulldestdir"
- if test -f "$fmtfile"; then
- grep '^! ' $format.log >/dev/null 2>&1 &&
- log_warning "\`$engine -ini $tcxflag $jobswitch $prgswitch $texargs' possibly failed."
-
- # We don't want user-interaction for the following "mv" commands:
- mv "$format.log" "$fulldestdir/$format.log" </dev/null
- #
- destfile=$fulldestdir/$fmtfile
- if mv "$fmtfile" "$destfile" </dev/null; then
- verboseMsg "$progname: $destfile installed."
- #
- # As a special special case, we create mplib-luatex.mem for use by
- # the mplib embedded in luatex if it doesn't already exist. (We
- # never update it if it does exist.)
- #
- # This is used by the luamplib package. This way, an expert user
- # who wants to try a new version of luatex (hence with a new
- # version of mplib) can manually update mplib-luatex.mem without
- # having to tamper with mpost itself.
- #
- if test "x$format" = xmpost && test "x$engine" = xmpost; then
- mplib_mem_name=mplib-luatex.mem
- mplib_mem_file=$fulldestdir/$mplib_mem_name
- if test \! -f $mplib_mem_file; then
- verboseMsg "$progname: copying $destfile to $mplib_mem_file"
- if cp "$destfile" "$mplib_mem_file" </dev/null; then
- mktexupd "$fulldestdir" "$mplib_mem_name"
- else
- log_warning "cp $destfile $mplib_mem_file failed."
- fi
- else
- verboseMsg "$progname: $mplib_mem_file already exists, not updating."
- fi
- fi
- #
- # Echo the (main) output filename for our caller.
- $mktexfmtMode && $mktexfmtFirst \
- && echo "$destfile" && mktexfmtFirst=false
- #
- mktexupd "$fulldestdir" "$fmtfile"
- fi
- else
- log_failure "\`$engine -ini $tcxflag $jobswitch $prgswitch $texargs' failed"
- fi
-}
-
-###############################################################################
-# recreate_loop()
-# for each line in config file: check match-condition and recreate format
-# if there is a match
-###############################################################################
-recreate_loop()
-{
- OIFS=$IFS
- IFS='
-'
- set `echo x; sed '/^#/d; /^[ ]*$/d' "$cnf_file"`; shift
- IFS=$OIFS
- for line
- do
- parse_line $line || continue
- check_match || continue
- run_initex
- done
-}
-
-###############################################################################
-# listcfg_loop()
-# prints all format definitions in config files (enabled and disabled ones)
-# for supported formats (i.e. for those which have an existing ini file)
-###############################################################################
-listcfg_loop()
-{
- OIFS=$IFS
- IFS='
-'
- set `echo x; sed '/^#$/d; /^#[^!]/d; /^[ ]*$/d' "$cnf_file"`; shift
- IFS=$OIFS
- for line
- do
- parse_line $line && echo "$line"
- done
-}
-
-###############################################################################
-# check_match()
-# recreate all formats
-###############################################################################
-check_match()
-{
- $need_find_hyphenfile && \
- this_hyphenfile="`find_hyphenfile "$format" "$hyphenation"`"
-
- eval $match_cmd && setmatch true
-}
-
-###############################################################################
-# recreate_by_fmt(fmtname)
-# recreate all versions of fmtname
-###############################################################################
-recreate_by_fmt()
-{
- fmtname=$1
- match_cmd="test x\$format = x$fmtname"
- recreate_loop
-}
-
-###############################################################################
-# create_missing()
-# create all missing format files
-###############################################################################
-create_missing()
-{
- # match_cmd='test ! -f $destdir/$fmtfile'
- match_cmd='test ! -f "`kpsewhich -engine=$texengine -progname=$format $fmtfile`"'
- recreate_loop
-}
-
-###############################################################################
-# recreate_existing()
-# recreate only existing format files
-###############################################################################
-recreate_existing()
-{
- match_cmd='test -f "`kpsewhich -engine=$texengine -progname=$format $fmtfile`"'
- recreate_loop
-}
-
-###############################################################################
-# recreate_all()
-# recreate all formats
-###############################################################################
-recreate_all()
-{
- match_cmd=true
- recreate_loop
-}
-
-###############################################################################
-# recreate_by_hyphenfile(hyphenfile)
-# recreate all formats that depend on hyphenfile
-###############################################################################
-recreate_by_hyphenfile()
-{
- hyphenfile=$1
-
- case $hyphenfile in
- /*)
- :
- ;;
- ./*)
- hyphenfile="$KPSE_DOT/"`echo "$hyphenfile" | sed 's@..@@'`
- ;;
- *)
- hyphenfile="$KPSE_DOT/$hyphenfile"
- ;;
- esac
- need_find_hyphenfile=true
- match_cmd="echo \"\$this_hyphenfile\" | grep $hyphenfile >/dev/null"
-
- # No match before the loop:
- setmatch false
-
- recreate_loop
-
- # Now check if there was at least one match:
- getmatch || maybe_abort "no format depends on hyphen file \`$hyphenfile'"
-}
-
-###############################################################################
-# recreate_by_engine(enginename)
-# recreate all formats that are based on enginename
-###############################################################################
-recreate_by_engine()
-{
- enginename=$1
-
- match_cmd="test x\$engine = x$enginename"
-
- # No match before the loop:
- setmatch false
-
- recreate_loop
-
- # Now check if there was at least one match:
- getmatch || maybe_abort "no format depends on engine \`$enginename'"
-}
-
-
-
-###############################################################################
-# show_hyphen_file(format)
-# prints full name of the hyphenfile for format
-#
-# exit code: returns error code if the ini file is not installed or if
-# the hyphen file cannot be found
-###############################################################################
-show_hyphen_file()
-{
- fmtname=$1
-
- find_info_for_name "$fmtname" || abort "no info for format \`$fmtname'"
- if test "x$hyphenation" = x-; then
- echo -
- cleanup 0
- fi
- find_hyphenfile "$format" "$hyphenation" \
- || abort "hyphenfile \`$hyphenation' not found"
-}
-
-###############################################################################
-# disablefmt(format)
-# disables format in configuration file
-###############################################################################
-disablefmt()
-{
- grep "^$1[ ]" $cnf_file >/dev/null || { (exit 0); return 0; }
-
- ed $cnf_file >/dev/null 2>&1 <<-eof
- g/^$1[ ]/s/^/#! /
- w
- q
-eof
- (exit 0); return 0
-}
-
-###############################################################################
-# enablefmt(format)
-# enables format in configuration file
-###############################################################################
-enablefmt()
-{
- grep "^#![ ]*$1[ ]" $cnf_file >/dev/null || { (exit 0); return 0; }
- ed $cnf_file >/dev/null 2>&1 <<-eof
- g/^#![ ]*$1[ ]/s/..[ ]*//
- w
- q
-eof
- (exit 0); return 0
-}
-
-main ${1+"$@"}
-cleanup 0
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fontinst.1 b/Build/source/texk/texlive/linked_scripts/tetex/fontinst.1
deleted file mode 100644
index b907280d90d..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fontinst.1
+++ /dev/null
@@ -1,45 +0,0 @@
-.TH "fontinst" "1" "May 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-fontinst \- utility to run TeX as fontinst
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBfontinst\fP \fIpackage\fP
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBfontinst\fP runs \fBtex\fP(1) with the \fB--progname\fP flag set to
-pretend to be the program fontinst (affecting Karl Berry paths)\&.
-.PP
-Typing
-.PP
-\f(CWfontinst fontinst\&.sty\fP
-.PP
-will start \fBtex\fP(1) and give the user an interactive prompt
-(\f(CW*\fP) where fontinst commands can be typed (such as
-\f(CW\elatinfamily{ptm}{}\ebye\fP)\&.
-.PP
-.SH "SEE ALSO"
-.PP
-\fBtex\fP(1)
-.PP
-The fontinst manual, \fIfontinst\&.tex\fP\&.
-.PP
-Web page: <http://tug\&.org/applications/fontinst/>
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to tex-fonts@tug\&.org (mailing list)\&.
-.PP
-.SH "AUTHOR"
-.PP
-Thomas Esser
-<te@dbs\&.uni-hannover\&.de>
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/fontinst.sh b/Build/source/texk/texlive/linked_scripts/tetex/fontinst.sh
deleted file mode 100755
index 7d1271517ad..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/fontinst.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-tex -progname=fontinst \&tex ${1+"$@"}
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/kpsetool.1 b/Build/source/texk/texlive/linked_scripts/tetex/kpsetool.1
deleted file mode 100644
index addd9b08344..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/kpsetool.1
+++ /dev/null
@@ -1,106 +0,0 @@
-.TH "kpsetool" "1" "September 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-kpsetool \- script to make teTeX-style \fBkpsetool\fP,
-\fBkpsexpand\fP, and \fBkpsepath\fP available
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBkpsetool \fP [ \fIOPTIONS\fP\&.\&.\&. ] \fICOMMAND\fP
-.PP
-\fBkpsexpand\fP [ \fIOPTIONS\fP\&.\&.\&. ] \fISTRING\fP
-.PP
-\fBkpsepath\fP [ \fIOPTIONS\fP\&.\&.\&. ] \fIPATHTYPE\fP
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBkpsetool\fP is a Bourne shell script that makes a teTeX-style
-\fBkpsetool\fP, \fBkpsexpand\fP, and \fBkpsepath\fP available\&.
-\fBkpsetool\fP uses \fBweb2c\fP\'s (new) \fBkpsexpand\fP binary, so the
-syntax for \fBkpsexpand\fP is incompatible with teTeX\'s as of version
-0\&.4\&.
-.PP
-.SH "OPTIONS"
-.PP
-.IP "\fB-m\fP \fImode\fP"
-set Metafont mode
-.IP "\fB-n\fP \fIprogname\fP"
-pretend to be \fIprogname\fP to kpathsea
-.IP "\fB-p\fP"
-act like \fBkpsepath\fP(1)
-.IP "\fB-v\fP"
-act like \fBkpsexpand\fP(1)
-.IP "\fB-w\fP"
-act like \fBkpsewhich\fP(1)
-.PP
-.SH "USAGE"
-.PP
-\fIPATHTYPE\fP can be
-.PP
-.IP "\fBbase\fP"
-Metafont memory dump
-.IP "\fBbib\fP"
-BibTeX bibliography source
-.IP "\fBbst\fP"
-BibTeX style files
-.IP "\fBcnf\fP"
-Kpathsea runtime configuration files
-.IP "\fBdvips_config\fP"
-dvips config files
-.IP "\fBdvips_header\fP"
-dvips header files
-.IP "\fBfmt\fP"
-TeX memory dump
-.IP "\fBgf\fP"
-generic font bitmap
-.IP "\fBmem\fP"
-MetaPost memory dump
-.IP "\fBmf\fP"
-Metafont source
-.IP "\fBmfpool\fP"
-Metafont program strings
-.IP "\fBmp\fP"
-MetaPost source
-.IP "\fBmppool\fP"
-MetaPost program strings
-.IP "\fBmpsupport\fP"
-MetaPost support files
-.IP "\fBpict\fP"
-Other kinds of figures
-.IP "\fBpk\fP"
-packed bitmap font
-.IP "\fBtex\fP"
-TeX source
-.IP "\fBtexpool\fP"
-TeX program strings
-.IP "\fBtfm\fP"
-TeX font metrics
-.IP "\fBtroff_font\fP"
-troff fonts
-.IP "\fBvf\fP"
-virtual font
-.PP
-.SH "SEE ALSO"
-.PP
-\fBkpsewhich\fP(1)
-.PP
-\fIKpathsea: A library for path searching\fP (info or DVI file)
-.PP
-Web page: <http://tug\&.org/teTeX/>
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to <tetex@dbs\&.uni-hannover\&.de> (mailing list)\&.
-.PP
-.SH "AUTHOR"
-.PP
-\fBkpsetool\fP was written by Thomas Esser
-<te@dbs\&.uni-hannover\&.de> in March, 1997\&. \fBkpsetool\fP
-is in the public domain\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/kpsetool.sh b/Build/source/texk/texlive/linked_scripts/tetex/kpsetool.sh
deleted file mode 100755
index 463097fd4a9..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/kpsetool.sh
+++ /dev/null
@@ -1,118 +0,0 @@
-#!/bin/sh
-
-# kpsetool. Script to make teTeX-style kpsetool, kpsexpand and kpsepath
-# available. Web2C's kpsewhich offers a superset of the functionality.
-# For compatibilty with old versions of teTeX, this script provides the
-# old command line interface of kpsetool, kpsexpand and kpsepath. All the
-# real work is done inside Web2C's kpsewhich.
-# Thomas Esser <te@dbs.uni-hannover.de>, Mar 1997, public domain.
-
-export PATH
-
-usage="
-Usage: kpsexpand [options] string
-Usage: kpsetool -w [options] pathtype filename
-Usage: kpsepath [options] pathtype
-
-Valid options are the following:
- -n progname : pretend to be progname to kpathsea
- -m mode : set Metafont mode
- -w : locate files (similar to kpsewhich)
- -p : act like kpsepath
- -v : act like kpsexpand
-
-Valid pathtypes are:
- gf : generic font bitmap
- pk : packed bitmap font
- base : Metafont memory dump
- bib : BibTeX bibliography source
- bst : BibTeX style files
- cnf : Kpathsea runtime configuration files
- fmt : TeX memory dump
- mem : MetaPost memory dump
- mf : Metafont source
- mfpool : Metafont program strings
- mp : MetaPost source
- mppool : MetaPost program strings
- mpsupport : MetaPost support files
- pict : Other kinds of figures
- tex : TeX source
- texpool : TeX program strings
- tfm : TeX font metrics
- vf : virtual font
- dvips_config : dvips config files
- dvips_header : dvips header files
- troff_font : troff fonts
-"
-
-action=kpsexpand
-case $0 in
- */kpsewhich) action=kpsewhich;;
- */kpsepath) action=kpsepath;;
-esac
-
-progname=`echo $0 | sed 's@.*/@@'`
-flags=''
-
-while true; do
- case x"$1" in
- x-n)
- if test $# = 1; then
- echo "$progname: missing argument for -n."
- echo "$usage"; exit 1
- else
- flags="$flags -progname=$2"; shift; shift
- fi;;
- x-m)
- if test $# = 1; then
- echo "$progname: missing argument for -m."
- echo "$usage"; exit 1
- else
- flags="$flags -mode=$2"; shift; shift
- fi;;
- x-w) action=kpsewhich; shift;;
- x-p) action=kpsepath; shift;;
- x-v) action=kpsexpand; shift;;
- *) break;;
- esac
-done
-
-case "$action" in
- kpsewhich|kpsepath)
- case "$1" in
- gf) format='gf';;
- pk) format='pk';;
- base) format='.base';;
- bib) format='.bib';;
- bst) format='.bst';;
- cnf) format='.cnf';;
- fmt) format='.fmt';;
- mem) format='.mem';;
- mf) format='.mf';;
- mfpool) format='.pool';;
- mp) format='.mp';;
- mppool) format='.pool';;
- mpsupport) format='MetaPost support';;
- pict) format='.eps';;
- tex) format='.tex';;
- texpool) format='.pool';;
- tfm) format='.tfm';;
- vf) format='.vf';;
- dvips_config) format='dvips config';;
- dvips_header) format='.pro';;
- troff_font) format='Troff fonts';;
- *) echo "$progname: $1: unknown format"; echo "$usage"; exit 1;;
- esac
- shift;;
-esac
-
-case "$action" in
- kpsewhich)
- test $# = 1 || { echo "$progname: missing filename"; echo "$usage"; exit 1; }
- kpsewhich $flags -format="$format" "$1";;
- kpsepath)
- kpsewhich $flags -show-path="$format";;
- kpsexpand)
- test $# = 1 || { echo "$progname: missing string"; echo "$usage"; exit 1; }
- kpsewhich $flags -expand-var="$1";;
-esac
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.1 b/Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.1
deleted file mode 100644
index 76700ed33fe..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.1
+++ /dev/null
@@ -1,50 +0,0 @@
-.TH "kpsewhere" "1" "March 2004" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-kpsewhere \- Expanding \fBkpsewhich\fP to separately iterate over each
-texmf tree listed in $TEXMF.
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBkpsewhere \fP [ \fIkpsewhich-OPTIONS\fP\&.\&.\&. ] \fICOMMAND\fP
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBkpsewhere\fP is an extension to \fBkpsewhich\fP (as \fBwhere\fP is
-for \fBwhich\fP in tcsh). The intention is to provide a way to check
-for conflicts/shadowed files. It will, however, only find \fBone\fP
-file per TEXMF tree.
-.PP
-.SH "OPTIONS"
-.PP
-.IP "\fB-h|--help\fP"
-show a short help message
-.IP "\fB\&*\fP"
-all other options are directly handed to kpsewhich
-.PP
-.SH "SEE ALSO"
-.PP
-\fBkpsewhich\fP(1)
-.PP
-\fIKpathsea: A library for path searching\fP (info or DVI file)
-.PP
-Web page: <http://tug\&.org/teTeX/>
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to <tetex@dbs\&.uni-hannover\&.de> (mailing list)\&.
-.PP
-.SH "AUTHOR"
-.PP
-\fBkpsewhere\fP was written by Hans Fredrik Nordhaug
-<hans\&.fredrik@nordhaug\&.no>, additions by
-Thomas Esser
-<te@dbs\&.uni-hannover\&.de>, in 2003 and 2004\&. \fBkpsewhere\fP
-is in the public domain\&.
-.PP
-This manual page was written by Frank Küster <frank@kuesterei\&.ch>,
-for the Debian GNU/Linux system\&. It is also in the public domain
-and may be used and changed by others without contacting the author\&.
-Any mistakes or omissions in the manual page are my fault; inquiries
-about or corrections to this manual page should be directed to me (and
-not to the primary author)\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.sh b/Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.sh
deleted file mode 100755
index 51088ee80d6..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/kpsewhere.sh
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/sh
-#
-# Thomas Esser, Hans Fredrik Nordhaug, 2003, 2004.
-# Public domain.
-#
-# kpsewhere is an extension to kpsewhich (as where is for which in tcsh).
-# The intention is to provide a way to check for conflicts/shadowed
-# files.
-#
-# Original version by Hans Fredrik Nordhaug <hans.fredrik@nordhaug.no>
-#
-# Bugs / limitations:
-# conflicts/shadowed files whithin each texmf tree are not found.
-#
-
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-help='Usage: kpsewhere [OPTION]... [FILENAME]...
- Expanding kpsewhich to iterate over each texmf tree listed in $TEXMF
- separately.
-
- See kpsewhich for help on options.
-
- --help show this help'
-
-options=
-while
- case $1 in
- -h|-help|--help)
- echo "$help" >&2
- exit 0;;
- -*) options="${options} '${1}'";;
- *) break;;
- esac
-do shift; done
-
-case $# in
- 0)
- echo "$help" >&2
- exit 1
- ;;
-esac
-
-IFS=':'
-for file
-do
- for path in `kpsewhich --expand-path='$TEXMF'`
- do
- eval TEXMF=\$path kpsewhich $options \"\$file\"
- done
-done
-exit 0
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/ps2frag.1 b/Build/source/texk/texlive/linked_scripts/tetex/ps2frag.1
deleted file mode 100644
index b572c5733c1..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/ps2frag.1
+++ /dev/null
@@ -1,41 +0,0 @@
-.TH ps2frag 1 "Feb 95" TeXware
-.SH NAME
-ps2frag - obsolete shell script for the PSfrag system.
-.SH IMPORTANT NOTICE
-The new PSfrag system no longer requires the ps2frag script; instead, it
-handles the processing entirely within TeX/LaTeX and DVIPS. I'm sure you
-will agree that never needing to run ps2frag again is a nice convenience!
-.P
-However, there are two significant differences in the way this new version
-of PSfrag works. Please make yourself aware of them:
-.P
-1) XDvi is no longer able to determine where your PSfrag replacements
-should
-go, so instead it lines them up in a vertical list to the left of the
-figure. This allows you to confirm that they have been typeset properly, at
-least. However, to confirm that PSfrag
-.B positions
-your replacements properly, you will have to view the PostScript
-version of your file with a viewer like GhostView, or print it out.
-This seems to be the
-only disadvantage to the elimination of the pre-processing step.
-.P
-2) If you embed '\\tex' commands inside your figures, you now need to
-explicitly _tell_ PSfrag to process these commands. To do so, use
-\\usepackage[scanall]{psfrag}
-instead of
-\\usepackage{psfrag}
-at the beginning of your LaTeX file.
-.P
-If you only use '\\tex' commands in a small number of figures, then a
-more efficient might be to turn on '\\tex'-scanning only for those
-figures. To do that, add the command '\\psfragscanon' immediately before
-each relevant \\includegraphics or \\epsfbox command.
-.P
-.SH NOTES
-See the PSfrag documentation for further information.
-.SH "SEE ALSO"
-dvips(1), gs(1), ghostview(1), latex(1)
-.SH AUTHORS
-.IP psfrag@rascals.stanford.edu
-The PSfrag maintainer's mailing list.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/ps2frag.sh b/Build/source/texk/texlive/linked_scripts/tetex/ps2frag.sh
deleted file mode 100755
index b8e673be087..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/ps2frag.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-
-tty -s && {
- echo
- echo "Warning: the ps2frag script is not needed with this version of psfrag."
- echo "Please read the manpage ps2frag(1) and the documentation of the"
- echo "psfrag package."
- echo
-} >&2
-
-exit 0
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/pslatex.1 b/Build/source/texk/texlive/linked_scripts/tetex/pslatex.1
deleted file mode 100644
index c206596a6a0..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/pslatex.1
+++ /dev/null
@@ -1,44 +0,0 @@
-.TH "pslatex" "1" "September 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-pslatex \- utility to typeset LaTeX files using PostScript fonts
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBpslatex\fP [\fILATEXARGS\fP] \fILATEXFILE\fP[\&.tex]
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBpslatex\fP allows you to typeset a LaTeX source file using basic
-Adobe Type 1 PostScript fonts (Times, Helvetica, and Courier)
-\fIwithout\fP editing the file to load the necessary packages\&.
-.PP
-It takes any arguments that \fBlatex\fP(1) can take\&.
-.PP
-.SH "OPTIONS"
-.PP
-None\&.
-.PP
-.SH "FILES"
-.PP
-Many\&. See the readme file for \fIpslatex\&.sty\fP\&.
-.PP
-.SH "SEE ALSO"
-.PP
-\fBlatex\fP(1), \fI\fITEXMF\fP/latex/pslatex/00readme\&.txt\fP
-.PP
-.SH "BUGS"
-.PP
-None known\&. Report any found to the author\&.
-.PP
-.SH "AUTHOR"
-.PP
-\fBpslatex\fP was written by David Carlisle
-<david@dcarlisle\&.demon\&.co\&.uk>\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/pslatex.sh b/Build/source/texk/texlive/linked_scripts/tetex/pslatex.sh
deleted file mode 100755
index 4badef0ec12..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/pslatex.sh
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/sh
-
-# Copyright 1994 David Carlisle
-# This file may be redistributed and/or modified under the terms of the
-# LaTeX Project Public License distributed from CTAN archives in directory
-# macros/latex/base/lppl.txt; either version 1 of the License, or (at
-# your option) any later version.
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-# we want to be able to use options to latex:
-while :; do
- case $1 in
- -*)
- latexoptions="$latexoptions \"$1\""
- shift;;
- *)
- break;;
- esac
-done
-
-echo
-echo "*************************************"
-echo "* Using LaTeX, with pslatex package *"
-echo "*************************************"
-echo
-
-# messing around with \PSLATEXTMP is for AUCTeX which calls
-# documents via latex \nonstopmode \input{file}
-
-latex $latexoptions \
- "\AtBeginDocument{\RequirePackage{pslatex}}"\
- "\def\PSLATEXTMP{\futurelet\PSLATEXTMP\PSLATEXTMPB}"\
- "\def\PSLATEXTMPB{\ifx\PSLATEXTMP\nonstopmode\else\input\fi}"\
- "\PSLATEXTMP" ${1+"$@"}
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/rubibtex.1 b/Build/source/texk/texlive/linked_scripts/tetex/rubibtex.1
deleted file mode 100644
index 0142072a769..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/rubibtex.1
+++ /dev/null
@@ -1,63 +0,0 @@
-.TH "rubibtex" "1" "October 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-rubibtex \- make a bibliography for (La)TeX using Russian
-letters as item names
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBrubibtex\fP \fIBASENAME\fP
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBrubibtex\fP is used to run \fBbibtex\fP(1) on auxiliary files with
-Russian characters in item names (citation keys)\&. It is part of the
-T2 package\&.
-.PP
-\fBrubibtex\fP copies the auxiliary file to \fI/tmp\fP, uses
-\fBsed\fP(1) to convert Cyrillic character commands to their 8-bit
-ASCII equivalents; runs \fBbibtex\fP(1) on the modified file; and
-finally moves the original auxiliary file back (overwriting the
-modified file)\&.
-.PP
-\fBrubibtex\fP assumes that the \fBbibtex\fP(1) database (\f(CWbib\fP)
-files are encoded with the KOI8-R encoding\&.
-.PP
-.SH "FILES"
-.PP
-.IP
-.IP "\fIbasename\&.aux\fP"
-LaTeX auxiliary file
-.IP
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to the authors\&.
-.PP
-.SH "COPYRIGHT"
-.PP
-The T2 package is Copyright 1997-1999 Werner Lemberg, Vladimir
-Volovich and any individual authors listed elsewhere in package files\&.
-.PP
-It may be distributed under the conditions of the LaTeX Project Public
-License, either version 1\&.1 of this license or (at your option) any
-later version\&.
-.PP
-.SH "SEE ALSO"
-.PP
-\fBbibtex\fP(1), \fBsed\fP(1),
-<ftp://ftp\&.vsu\&.ru/pub/tex/T2/README>\&.
-.PP
-.SH "AUTHOR"
-.PP
-Werner Lemberg
-<wl@gnu\&.org>, Vladimir Volovich
-<TeX@vvv\&.vsu\&.ru>\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/rubibtex.sh b/Build/source/texk/texlive/linked_scripts/tetex/rubibtex.sh
deleted file mode 100755
index 373e6e1194d..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/rubibtex.sh
+++ /dev/null
@@ -1,110 +0,0 @@
-#!/bin/sh
-
-# rubibtex, based on the original version contained in the t2 bundle.
-# Thomas Esser, Public Domain.
-
-progname=rubibtex
-tmpdir=${TMPDIR-${TEMP-${TMP-/tmp}}}/$progname.$$
-job=$1
-backup="$tmpdir/orig.aux"
-
-case $job in
- "")
- echo "usage: $progname file" >&2
- exit 1
-esac
-
-if test ! -f "$job.aux"; then
- echo "$progname: file \`$job.aux' does not exist." >&2
- exit 1
-fi
-
-trap '
- rm -rf "$tmpdir"
- exit 1
-' 1 2 3 7 13 15
-(umask 077; mkdir "$tmpdir") \
- || { echo "$progname: could not create directory \`$tmpdir'" >&2; exit 1; }
-
-cat <"$job.aux" >"$backup" || {
- echo "$progname: could not create backup of file \`$job.aux' as \`$backup'." >&2
- rm -rf "$tmpdir"
- exit 1
-}
-
-sed '
- /^\\citation/ {
- s/\\IeC {\\CYRA }/á/g
- s/\\IeC {\\CYRB }/â/g
- s/\\IeC {\\CYRV }/÷/g
- s/\\IeC {\\CYRG }/ç/g
- s/\\IeC {\\CYRD }/ä/g
- s/\\IeC {\\CYRE }/å/g
- s/\\IeC {\\CYRYO }/³/g
- s/\\IeC {\\CYRZH }/ö/g
- s/\\IeC {\\CYRZ }/ú/g
- s/\\IeC {\\CYRI }/é/g
- s/\\IeC {\\CYRISHRT }/ê/g
- s/\\IeC {\\CYRK }/ë/g
- s/\\IeC {\\CYRL }/ì/g
- s/\\IeC {\\CYRM }/í/g
- s/\\IeC {\\CYRN }/î/g
- s/\\IeC {\\CYRO }/ï/g
- s/\\IeC {\\CYRP }/ð/g
- s/\\IeC {\\CYRR }/ò/g
- s/\\IeC {\\CYRS }/ó/g
- s/\\IeC {\\CYRT }/ô/g
- s/\\IeC {\\CYRU }/õ/g
- s/\\IeC {\\CYRF }/æ/g
- s/\\IeC {\\CYRH }/è/g
- s/\\IeC {\\CYRC }/ã/g
- s/\\IeC {\\CYRCH }/þ/g
- s/\\IeC {\\CYRSH }/û/g
- s/\\IeC {\\CYRSHCH }/ý/g
- s/\\IeC {\\CYRHRDSN }/ÿ/g
- s/\\IeC {\\CYRERY }/ù/g
- s/\\IeC {\\CYRSFTSN }/ø/g
- s/\\IeC {\\CYREREV }/ü/g
- s/\\IeC {\\CYRYU }/à/g
- s/\\IeC {\\CYRYA }/ñ/g
- s/\\IeC {\\cyra }/Á/g
- s/\\IeC {\\cyrb }/Â/g
- s/\\IeC {\\cyrv }/×/g
- s/\\IeC {\\cyrg }/Ç/g
- s/\\IeC {\\cyrd }/Ä/g
- s/\\IeC {\\cyre }/Å/g
- s/\\IeC {\\cyryo }/£/g
- s/\\IeC {\\cyrzh }/Ö/g
- s/\\IeC {\\cyrz }/Ú/g
- s/\\IeC {\\cyri }/É/g
- s/\\IeC {\\cyrishrt }/Ê/g
- s/\\IeC {\\cyrk }/Ë/g
- s/\\IeC {\\cyrl }/Ì/g
- s/\\IeC {\\cyrm }/Í/g
- s/\\IeC {\\cyrn }/Î/g
- s/\\IeC {\\cyro }/Ï/g
- s/\\IeC {\\cyrp }/Ð/g
- s/\\IeC {\\cyrr }/Ò/g
- s/\\IeC {\\cyrs }/Ó/g
- s/\\IeC {\\cyrt }/Ô/g
- s/\\IeC {\\cyru }/Õ/g
- s/\\IeC {\\cyrf }/Æ/g
- s/\\IeC {\\cyrh }/È/g
- s/\\IeC {\\cyrc }/Ã/g
- s/\\IeC {\\cyrch }/Þ/g
- s/\\IeC {\\cyrsh }/Û/g
- s/\\IeC {\\cyrshch }/Ý/g
- s/\\IeC {\\cyrhrdsn }/ß/g
- s/\\IeC {\\cyrery }/Ù/g
- s/\\IeC {\\cyrsftsn }/Ø/g
- s/\\IeC {\\cyrerev }/Ü/g
- s/\\IeC {\\cyryu }/À/g
- s/\\IeC {\\cyrya }/Ñ/g
- }
-' <"$backup" >"$job.aux"
-
-bibtex "$job"
-
-cat "$backup" > "$job.aux"
-rm -rf "$tmpdir"
-exit 0
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.1 b/Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.1
deleted file mode 100644
index 0fb271841d0..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.1
+++ /dev/null
@@ -1,63 +0,0 @@
-.TH "rumakeindex" "1" "September 2000" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-rumakeindex \- process a LaTeX index using Russian Cyrillic
-characters
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBrumakeindex\fP \fIbasename\fP
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBrumakeindex\fP is used to run \fBmakeindex\fP(1) on \f(CWidx\fP files
-that use Russian characters\&. It is part of the T2 package\&.
-.PP
-\fBrumakeindex\fP runs \fBsed\fP(1) on the \f(CWidx\fP file to convert
-Cyrillic character commands to 8-bit ASCII characters; pipes the
-results through \fBmakeindex\fP(1); and then through \fBtr\fP(1)
-to do some final conversions\&. The results are placed in a KOI8-R
-encoded \f(CWind\fP file\&.
-.PP
-.SH "FILES"
-.PP
-.IP
-.IP "\fIbasename\&.idx\fP"
-LaTeX index entry file
-.IP "\fIbasename\&.ilg\fP"
-LaTeX index log file
-.IP "\fIbasename\&.ind\fP"
-LaTeX processed index file
-.IP
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to the authors\&.
-.PP
-.SH "COPYRIGHT"
-.PP
-The T2 package is Copyright 1997-1999 Werner Lemberg, Vladimir
-Volovich and any individual authors listed elsewhere in package files\&.
-.PP
-It may be distributed under the conditions of the LaTeX Project Public
-License, either version 1\&.1 of this license or (at your option) any
-later version\&.
-.PP
-.SH "SEE ALSO"
-.PP
-\fBmakeindex\fP(1), \fBsed\fP(1), \fBtr\fP(1),
-<ftp://ftp\&.vsu\&.ru/pub/tex/T2/README>\&.
-.PP
-.SH "AUTHOR"
-.PP
-Werner Lemberg
-<wl@gnu\&.org>, Vladimir Volovich
-<TeX@vvv\&.vsu\&.ru>\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
-.PP
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.sh b/Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.sh
deleted file mode 100755
index b7b0c072729..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/rumakeindex.sh
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-BASE=`basename "$1" .idx`
-IDX=$BASE.idx
-IND=$BASE.ind
-ILG=$BASE.ilg
-
-sed '
-/^\\indexentry{/ {
-s/\\IeC {\\CYRA }/¾/g
-s/\\IeC {\\cyra }/¿/g
-s/\\IeC {\\CYRB }/À/g
-s/\\IeC {\\cyrb }/Á/g
-s/\\IeC {\\CYRV }/Â/g
-s/\\IeC {\\cyrv }/Ã/g
-s/\\IeC {\\CYRG }/Ä/g
-s/\\IeC {\\cyrg }/Å/g
-s/\\IeC {\\CYRD }/Æ/g
-s/\\IeC {\\cyrd }/Ç/g
-s/\\IeC {\\CYRE }/È/g
-s/\\IeC {\\cyre }/É/g
-s/\\IeC {\\CYRYO }/Ê/g
-s/\\IeC {\\cyryo }/Ë/g
-s/\\IeC {\\CYRZH }/Ì/g
-s/\\IeC {\\cyrzh }/Í/g
-s/\\IeC {\\CYRZ }/Î/g
-s/\\IeC {\\cyrz }/Ï/g
-s/\\IeC {\\CYRI }/Ð/g
-s/\\IeC {\\cyri }/Ñ/g
-s/\\IeC {\\CYRISHRT }/Ò/g
-s/\\IeC {\\cyrishrt }/Ó/g
-s/\\IeC {\\CYRK }/Ô/g
-s/\\IeC {\\cyrk }/Õ/g
-s/\\IeC {\\CYRL }/Ö/g
-s/\\IeC {\\cyrl }/×/g
-s/\\IeC {\\CYRM }/Ø/g
-s/\\IeC {\\cyrm }/Ù/g
-s/\\IeC {\\CYRN }/Ú/g
-s/\\IeC {\\cyrn }/Û/g
-s/\\IeC {\\CYRO }/Ü/g
-s/\\IeC {\\cyro }/Ý/g
-s/\\IeC {\\CYRP }/Þ/g
-s/\\IeC {\\cyrp }/ß/g
-s/\\IeC {\\CYRR }/à/g
-s/\\IeC {\\cyrr }/á/g
-s/\\IeC {\\CYRS }/â/g
-s/\\IeC {\\cyrs }/ã/g
-s/\\IeC {\\CYRT }/ä/g
-s/\\IeC {\\cyrt }/å/g
-s/\\IeC {\\CYRU }/æ/g
-s/\\IeC {\\cyru }/ç/g
-s/\\IeC {\\CYRF }/è/g
-s/\\IeC {\\cyrf }/é/g
-s/\\IeC {\\CYRH }/ê/g
-s/\\IeC {\\cyrh }/ë/g
-s/\\IeC {\\CYRC }/ì/g
-s/\\IeC {\\cyrc }/í/g
-s/\\IeC {\\CYRCH }/î/g
-s/\\IeC {\\cyrch }/ï/g
-s/\\IeC {\\CYRSH }/ð/g
-s/\\IeC {\\cyrsh }/ñ/g
-s/\\IeC {\\CYRSHCH }/ò/g
-s/\\IeC {\\cyrshch }/ó/g
-s/\\IeC {\\CYRHRDSN }/ô/g
-s/\\IeC {\\cyrhrdsn }/õ/g
-s/\\IeC {\\CYRERY }/ö/g
-s/\\IeC {\\cyrery }/÷/g
-s/\\IeC {\\CYRSFTSN }/ø/g
-s/\\IeC {\\cyrsftsn }/ù/g
-s/\\IeC {\\CYREREV }/ú/g
-s/\\IeC {\\cyrerev }/û/g
-s/\\IeC {\\CYRYU }/ü/g
-s/\\IeC {\\cyryu }/ý/g
-s/\\IeC {\\CYRYA }/þ/g
-s/\\IeC {\\cyrya }/ÿ/g
-}' $IDX | makeindex -t $ILG | tr '¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþÿ' \
- 'áÁâÂ÷×çÇäÄåų£öÖúÚéÉêÊëËìÌíÍîÎïÏðÐòÒóÓôÔõÕæÆèÈãÃþÞûÛýÝÿßùÙøØüÜàÀñÑ' > $IND
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/tcfmgr b/Build/source/texk/texlive/linked_scripts/tetex/tcfmgr
deleted file mode 100755
index e79be96f873..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/tcfmgr
+++ /dev/null
@@ -1,386 +0,0 @@
-#!/bin/sh
-# $Id$
-
-# invoke the right shell:
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-progname=tcfmgr
-
-abort()
-{
- echo "$progname: $@." >&2
- (exit 1); exit 1
-}
-
-mktexupd()
-{
- setupMktexupd
- "$TFC_MKTEXUPD" "$@" >&2
-}
-
-# call mktexdir script, disable all features (to prevent sticky directories)
-mktexdir()
-{
- setupMktexDir
- MT_FEATURES=none "$TFC_MKTEXDIR" "$@" >&2
-}
-
-setupMap()
-{
- case $setupMapOK in
- "") : ;;
- *) (exit 0); return 0;;
- esac
-
- case $TFC_MAP in
- "") TFC_MAP=`(kpsewhich -progname=texconfig -format='other text files' tcfmgr.map) 2>/dev/null`;;
- esac
-
- case $TFC_MAP in
- "") abort "config file \`tcfmgr.map' (usually in \$TEXMFMAIN/texconfig) not found (ls-R missing?)";;
- esac
-
- if test ! -f "$TFC_MAP"; then
- abort "config file \`TFC_MAP' does not exist"
- fi
- setupMapOK=true
-}
-
-setupTemp()
-{
- case $setupTempOK in
- "") : ;;
- *) (exit 0); return 0;;
- esac
-
- case $TFC_TEMP in
- "") TFC_TEMP=${TEMPDIR-/tmp};;
- esac
-
- if test ! -d "$TFC_TEMP"; then
- abort "temp directory \`$TFC_TEMP' does not exist"
- fi
-
- if test ! -w "$TFC_TEMP"; then
- abort "temp directory \`$TFC_TEMP' is not writable"
- fi
- setupTempOK=true
-}
-
-setupTexmfConfig()
-{
- case $TFC_TEXMFCONFIG in
- "") TFC_TEXMFCONFIG=`(kpsewhich -var-value=TEXMFCONFIG) 2>/dev/null`;;
- *) (exit 0); return 0;;
- esac
- case $TFC_TEXMFCONFIG in
- "") abort "variable \$TEXMFCONFIG is not defined in texmf.cnf";;
- esac
-}
-
-setupMktexDir()
-{
- case $TFC_MKTEXDIR in
- "") TFC_MKTEXDIR=`(kpsewhich --format='web2c files' mktexdir) 2>/dev/null`;;
- esac
-
- case $TFC_MKTEXDIR in
- "") abort "program mktexdir (usually in \$TEXMFMAIN/web2c) not found";;
- esac
-}
-
-setupMktexupd()
-{
- case $TFC_MKTEXUPD in
- "") TFC_MKTEXUPD=`(kpsewhich --format='web2c files' mktexupd) 2>/dev/null`;;
- esac
-
- case $TFC_MKTEXUPD in
- "") abort "program mktexupd (usually in \$TEXMFMAIN/web2c) not found";;
- esac
-}
-
-writableCheck()
-{
- setupTexmfConfig
- if test ! -d "$TFC_TEXMFCONFIG"; then
- mktexdir "$TFC_TEXMFCONFIG" >/dev/null 2>&1
- if test ! -d "$TFC_TEXMFCONFIG"; then
- msg="Directory TEXMFCONFIG=\`$TFC_TEXMFCONFIG' does not exist"
- (exit 1); return 1
- fi
- fi
-
- case "$relDir" in
- "") get_info;;
- esac
- if test -f "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE" \
- && test -w "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE"
- then
- (exit 0); return 0
- fi
-
- if test -d "$TFC_TEXMFCONFIG/$relDir"; then
- if test -w "$TFC_TEXMFCONFIG/$relDir"; then
- (exit 0); return 0
- else
- msg="Directory \`$TFC_TEXMFCONFIG/$relDir' is not writable"
- (exit 1); return 1
- fi
- else
- # we assume that a "mkdir -p" would work if the top-level
- # $TFC_TEXMFCONFIG is writable
- if test -w "$TFC_TEXMFCONFIG"; then
- (exit 0); return 0
- else
- msg="Directory \`$TFC_TEXMFCONFIG' is not writable"
- (exit 1); return 1
- fi
- fi
-}
-
-get_info()
-{
- case "$TFC_FILE" in
- "") abort "missing --file option or empty argument";;
- esac
- setupMap
- # prepare + get info
- IFS=$TAB
- # set -- x `(awk '$1 == file' file=$TFC_FILE <$TFC_MAP) 2>/dev/null`; shift
- set -- x `(grep "^$TFC_FILE[ ]" $TFC_MAP) 2>/dev/null`; shift
- IFS=$STD_IFS
-
- # assign results
- file="$1"
- relDir="$2"
- kpseFormat="$3"
- kpseProgArg="$4"
-
- # sanity checks
- case $file in
- "") abort "no info for file \`$TFC_FILE' in map \`$TFC_MAP'";;
- esac
-
- case $relDir in
- -) abort "no known standard location for file \`$TFC_FILE' in map \`$TFC_MAP'";;
- esac
-
- case $kpseProgArg in
- -) kpseProgArg=kpsewhich;;
- esac
-}
-
-check_out()
-{
- if $createEmptyFile; then
- :
- else
- case "$orig" in
- "")
- get_info
- orig=`(kpsewhich -format="$kpseFormat" -progname="$kpseProgArg" "$TFC_FILE") 2>/dev/null`
- ;;
- *)
- test -f "$orig" || orig=
- esac
-
- case $orig in
- "") abort "file \`$TFC_FILE' not found";;
- esac
- fi
-
- # writableCheck needs to get a valid relDir, so it calls get_info if necessary
- if writableCheck; then
- : ok
- else
- cat >&2 <<eof
-
-There was a problem finding a proper place to store configuration data.
-The message was:
- $msg
-
-To overcome such problems, set up the environment variable TEXMFCONFIG to
-point to a directory tree that is writable to you, e.g.
- TEXMFCONFIG=\$HOME/texmf; export TEXMFCONFIG
-or
- setenv TEXMFCONFIG \$HOME/texmf
-eof
- (exit 1); exit 1
- fi
-
- setupTemp
- : ${TFC_ID=tfc$$}
- for d in "$TFC_TEMP/$TFC_ID" "$TFC_TEMP/$TFC_ID/in" "$TFC_TEMP/$TFC_ID/out"; do
- (umask 077; mkdir "$d") || abort "could not create directory \`$d'"
- done
-
- if $createEmptyFile; then
- (umask 022
- > "$TFC_TEMP/$TFC_ID/in/$TFC_FILE"
- > "$TFC_TEMP/$TFC_ID/out/$TFC_FILE")
- else
- cp "$orig" "$TFC_TEMP/$TFC_ID/in/$TFC_FILE" \
- || abort "copy \`$orig' -> \`$TFC_TEMP/$TFC_ID/in/$TFC_FILE' failed"
-
- cp "$orig" "$TFC_TEMP/$TFC_ID/out/$TFC_FILE" \
- || abort "copy \`$orig' -> \`$TFC_TEMP/$TFC_ID/out/$TFC_FILE' failed"
-
- chmod u+w "$TFC_TEMP/$TFC_ID/out/$TFC_FILE"
- fi
-
- cat >"$TFC_TEMP/$TFC_ID/relDir" <<eof
-$relDir
-eof
-
- cat > "$TFC_TEMP/$TFC_ID/file" <<eof
-$TFC_FILE
-eof
-
- echo "$TFC_ID $TFC_TEMP/$TFC_ID/in/$TFC_FILE $TFC_TEMP/$TFC_ID/out/$TFC_FILE $orig"
-}
-
-check_in()
-{
- setupTemp
-
- if test ! -d "$TFC_TEMP/$TFC_ID"; then
- abort "directory \`$TFC_TEMP/$TFC_ID' does not exist. Perhaps missing arg --id"
- fi
-
- case "$TFC_FILE" in
- "") TFC_FILE=`(cat "$TFC_TEMP/$TFC_ID/file") 2>/dev/null`;;
- esac
-
- for f in "$TFC_TEMP/$TFC_ID/relDir" "$TFC_TEMP/$TFC_ID/file" "$TFC_TEMP/$TFC_ID/in/$TFC_FILE" "$TFC_TEMP/$TFC_ID/out/$TFC_FILE"; do
- if test ! -f "$f"; then
- abort "Oops! file \`$f' does not exist"
- fi
- done
-
- if (cmp "$TFC_TEMP/$TFC_ID/in/$TFC_FILE" "$TFC_TEMP/$TFC_ID/out/$TFC_FILE") >/dev/null 2>&1; then
- (exit 0); return 0
- fi
-
- setupTexmfConfig
- relDir=`cat "$TFC_TEMP/$TFC_ID/relDir"`
- if test ! -d "$TFC_TEXMFCONFIG/$relDir"; then
- setupMktexDir
- mktexdir "$TFC_TEXMFCONFIG/$relDir" || abort "could not create directory \`$TFC_TEXMFCONFIG/$relDir'"
- fi
-
- if test -f "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE"; then
- needsLSRUpdate=false
- test -w "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE" || rm -f "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE"
- else
- needsLSRUpdate=true
- fi
-
- if test -f "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE"; then
- cat <"$TFC_TEMP/$TFC_ID/out/$TFC_FILE" >"$TFC_TEXMFCONFIG/$relDir/$TFC_FILE" ||
- abort "failed to write new file \`$TFC_TEXMFCONFIG/$relDir/$TFC_FILE'"
- else
- cp "$TFC_TEMP/$TFC_ID/out/$TFC_FILE" "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE" ||
- abort "failed to copy \`$TFC_TEMP/$TFC_ID/out/$TFC_FILE' to \`$TFC_TEXMFCONFIG/$relDir/$TFC_FILE'"
- chmod 644 "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE" 2>/dev/null
- fi
- if $needsLSRUpdate; then
- mktexupd "$TFC_TEXMFCONFIG/$relDir" "$TFC_FILE"
- fi
- echo "$TFC_TEXMFCONFIG/$relDir/$TFC_FILE"
- (exit 0); return 0
-}
-
-find_file()
-{
- get_info
- kpsewhich -format="$kpseFormat" -progname="$kpseProgArg" "$TFC_FILE"
-}
-
-help()
-{
- cat <<eof
-Usage: $progname [option] ...
-
-Valid options:
- --reldir specify directory relative to texmf root
- --infile specify input file
- --emptyinfile create an empty input file
- --map specify map file
- --texmfconfig texmf tree for config files
- --mktexdir full path of mktexdir
- --mktexupd full path of mktexupd
- --tmp temp directory
- --id identity string (generated when running command co)
- --file specify configuration entry from map file
- --cmd command to execute
- --help display this help
-
-Valid commands (--cmd) are:
- co check out
- ci check in
- find look up source for file
- mapfile display path name of map file
-eof
-}
-
-show_map()
-{
- setupMap
- echo "$TFC_MAP"
-}
-
-TAB=' '
-SPACE=' '
-NL='
-'
-createEmptyFile=false
-
-STD_IFS="$TAB$SPACE$NL"
-while
- case $1 in
- --reldir) relDir=$2; shift;;
- --infile) orig=$2; shift;;
- --emptyinfile) createEmptyFile=true;;
- --map) TFC_MAP=$2; shift;;
- --texmfconfig)
- TFC_TEXMFCONFIG=$2; shift;;
- --mktexdir)
- TFC_MKTEXDIR=$2;;
- --mktexupd)
- TFC_MKTEXUPD=$2;;
- --tmp) TFC_TEMP=$2; shift;;
- --id) TFC_ID=$2; shift;;
- --file)TFC_FILE=$2; shift;;
- --cmd) TFC_CMD=$2; shift;;
- --help) TFC_CMD=help;;
- "") break;;
- *) abort "unknown option \`$1'; try $progname --help"; (exit 1); exit 1;;
- esac
-do test $# -gt 0 && shift; done
-
-case $TFC_CMD in
- ci) check_in;;
- co) check_out;;
- find) find_file;;
- mapfile) show_map;;
- help) help;;
- "")
- abort "no command; try $progname --help"; (exit 1); exit 1;;
- *)
- abort "unknown command \`$TFC_CMD'; try $progname --help"; (exit 1); exit 1;;
-esac
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/tcfmgr.map b/Build/source/texk/texlive/linked_scripts/tetex/tcfmgr.map
deleted file mode 100644
index a5c6f35cb3d..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/tcfmgr.map
+++ /dev/null
@@ -1,10 +0,0 @@
-# file rel dir search path progname
-dvipdfmx.cfg dvipdfmx other text files dvipdfmx
-config dvipdfm/config other text files dvipdfm
-config.ps dvips/config dvips config -
-modes.mf metafont/misc .mf -
-pdftexconfig.tex tex/generic/config .tex -
-fmtutil.cnf web2c web2c files -
-mktex.cnf web2c web2c files -
-updmap.cfg web2c web2c files -
-XDvi xdvi other text files xdvi
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/texconfig-dialog.sh b/Build/source/texk/texlive/linked_scripts/tetex/texconfig-dialog.sh
deleted file mode 100755
index bdf7ba202bc..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/texconfig-dialog.sh
+++ /dev/null
@@ -1,486 +0,0 @@
-#!/bin/sh
-
-# TeX-Config version 3.0
-# Thomas Esser, te@dbs.uni-hannover.de. Public domain.
-
-# invoke the right shell:
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-# the version string
-version='$Id$'
-
-: ${PAGER=more}
-progname=texconfig-dialog
-tmpdir=${TMPDIR-${TEMP-${TMP-/tmp}}}/tcdtmp.$$
-log=$tmpdir/log
-tmpmenu=$tmpdir/tmpmenu
-needsCleanup=false
-
-###############################################################################
-# cleanup()
-# clean up the temp area and exit with proper exit status
-###############################################################################
-cleanup()
-{
- rc=$1
- $needsCleanup && test -n "$tmpdir" && test -d "$tmpdir" \
- && { cd / && rm -rf "$tmpdir"; }
- termCtl reset
- (exit $rc); exit $rc
-}
-
-###############################################################################
-# setupTmpDir()
-# set up a temp directory and a trap to remove it
-###############################################################################
-setupTmpDir()
-{
- case $needsCleanup in
- true) return;;
- esac
-
- trap 'cleanup 1' 1 2 3 7 13 15
- needsCleanup=true
- (umask 077; mkdir "$tmpdir") \
- || abort "could not create directory \`$tmpdir'"
-}
-
-###############################################################################
-# abort(errmsg)
-# print `errmsg' to stderr and exit with error code 1
-###############################################################################
-abort()
-{
- echo "$progname: $1." >&2
- cleanup 1
-}
-
-logexec()
-{
- (echo; echo ">>> Executing \`$@' <<<") >> $log
- "$@" 2>&1 | tee -a $log
-}
-
-###############################################################################
-# runDialog(args, ...)
-# execute the right dialog program with the right default parameters
-###############################################################################
-runDialog()
-{
- if test -n "$DIALOG_PROG"; then
- termCtl clear
- $DIALOG_PROG --title "TeX setup utility" ${1+"$@"}
- runDialogRc=$?
- termCtl clear
- else
- abort "could not find dialog or whiptail program to run"
- fi
- (exit $runDialogRc)
- return $runDialogRc
-}
-
-###############################################################################
-# findDialog(void)
-# set DIALOG_PROG to the system dialog program, or the empty string.
-###############################################################################
-findDialog()
-{
- for bin in whiptail dialog
- do
- binLoc=`texconfig findprog $bin`
- case $binLoc in
- "") DIALOG_PROG="";;
- *) DIALOG_PROG=$binLoc; break;;
- esac
- done
-}
-
-###############################################################################
-# mktexdir(args)
-# call mktexdir script, disable all features (to prevent sticky directories)
-###############################################################################
-mktexdir()
-{
- MT_FEATURES=none "$TEXMFMAIN/web2c/mktexdir" "$@" >&2
-}
-
-###############################################################################
-# termCtl(arg)
-# some convenience utilities for terminal control
-###############################################################################
-termCtl()
-{
- case $1 in
- clear)
- test -n "$NO_CLEAR" && return
- tty >/dev/null 2>&1 && clear
- ;;
- reset)
- test -n "$NO_CLEAR" && return
- reset 2>/dev/null
- stty sane 2>/dev/null
- reset 2>/dev/null
- termCtl clear
- ;;
- readln)
- echo
- echo "press return to continue..."
- read a
- ;;
- esac
-}
-
-###############################################################################
-# menuMain(void)
-# the main menu
-###############################################################################
-menuMain()
-{
- cat <<-'eof'
- The interactive texconfig utility will be started now. Make sure
- your screen has at least 24 rows and 80 columns. If texconfig
- crashes now, you can still set up your teTeX system using the
- batch mode of texconfig. Try 'texconfig help' to get a list
- of options.
-
- The interactive mode works best with a real vt100 terminal or
- inside an xterm window.
-eof
- termCtl readln
-
- while :; do
- logMessage='view logfile'
-
- runDialog \
- --menu "
-Hint: all output of external commands (e.g. tex) is logged into
-a file. You can look at this file using "LOG". If cursor keys make
-trouble, you may have more luck with +/- and TAB.
-" \
- 23 80 14 \
- EXIT 'exit' \
- PAPER 'default paper: A4 or letter (us)' \
- MODE 'default metafont mode and resolution' \
- REHASH 'rebuild filename databases' \
- FORMATS 'edit format definitions' \
- HYPHENATION 'customize hyphenation' \
- DVIPS 'dvips configuration' \
- FAQ 'view frequently asked questions + answers' \
- CONF 'show configuration' \
- LOG "$logMessage" \
- 2>"$tmpmenu" || break
-
- case `cat "$tmpmenu"` in
- EXIT)
- break
- ;;
- PAPER)
- menuPaper
- ;;
- MODE)
- menuMode
- ;;
- REHASH)
- logexec texconfig rehash
- termCtl readln
- ;;
- FORMATS)
- texconfig formats
- termCtl readln
- ;;
- HYPHENATION)
- menuHyphenation
- ;;
- DVIPS)
- menuDvips
- ;;
- FAQ)
- texconfig faq
- termCtl readln
- ;;
- CONF)
- logexec texconfig conf
- termCtl readln
- ;;
- LOG)
- <"$log" eval $PAGER
- termCtl readln
- ;;
- esac
- done
-}
-
-menuGetMode()
-{
- # we need eval to get the command line right... :-(
- eval \
- runDialog \
- --menu \""
-Chosse a mode to be used when metafont generates font bitmaps. The resolution is the most important point, but there might
-be differences between modes of the same resolution. See the comments in the file modes.mf for more details.
-\"" \
- 23 80 14 \
- `texconfig mode-list` 2>"$tmpmenu"
-}
-
-menuMode()
-{
- menuGetMode
- mode=`cat "$tmpmenu"`
-
- if test -n "$mode"; then
- logexec texconfig mode "$mode"
- termCtl readln
- fi
-}
-
-menuDvips()
-{
- menuDvipsDest=ps
-
- while :; do
- case $menuDvipsDest in
- ps)
- menuDvipsPrinterOpt=
- menuDvipsMsg="
-dvips GLOBAL section. Define the most common default settings (config.ps).
-To define settings for a specific printer, first ADD a printer definition,
-then CHANGE it.
-"
- ;;
- *)
- menuDvipsPrinterOpt="-P $menuDvipsDest"
- menuDvipsMsg="
-dvips settings for printer $menuDvipsDest (config.$menuDvipsDest). Define
-local settings for this printer. To switch back to global settings mode,
-select GLOBAL.
-"
- ;;
- esac
-
- runDialog \
- --menu "$menuDvipsMsg
-You can use dvips for non PostScript printers, if you can setup your
-printing system to convert PostScript to a format that your printer can
-handle. Maybe, you can use GhostScript to do the conversion (if your
-printer is supported)." \
- 23 80 9 \
- RETURN 'back to the main menu' \
- DEST 'define default destination of the generated Postscript' \
- MODE 'change metafont mode/resolution' \
- OFFSET 'shift output by some offset' \
- PAPER 'define the default paper' \
- GLOBAL 'change global settings (config.ps)' \
- CHANGE 'change printer settings (config.$PRINTER)' \
- ADD 'add a printer configuration' \
- DEL 'remove a printer configuration' \
- 2>"$tmpmenu" || break
-
- menuDvipsAns=`cat "$tmpmenu"`
- case $menuDvipsAns in
- RETURN)
- break
- ;;
- DEST)
- runDialog --inputbox "Enter the command to print.
-
-In general, you need a command like 'lpr' or 'lpr -Pfoo'.
-
-NOTE: If you just press return, printing will be disabled and the output saved to a file by default.
-" 23 80 2>"$tmpmenu"
- if test $? = 0; then
- menuDvipsAns=`cat "$tmpmenu"`
- case $menuDvipsAns in
- "")
- menuDvipsPrintOpt=-
- ;;
- *)
- menuDvipsPrintOpt=$menuDvipsAns
- ;;
- esac
- logexec texconfig dvips $menuDvipsPrinterOpt printcmd "$menuDvipsPrintOpt"
- termCtl readln
- fi
- ;;
- MODE)
- menuGetMode
- mode=`cat "$tmpmenu"`
-
- if test -n "$mode"; then
- logexec texconfig dvips $menuDvipsPrinterOpt mode "$mode"
- termCtl readln
- fi
- ;;
- OFFSET)
- runDialog --inputbox "Enter a dimension pair (a rightwards offset and a downwards
-offset), e.g. 2mm,-0.5in (right 2mm and up .5in):" 23 80 2>"$tmpmenu"; menuDvipsAns=`cat "$tmpmenu"`
- case $menuDvipsAns in
- "") : ;;
- *)
- logexec texconfig dvips $menuDvipsPrinterOpt offset "$menuDvipsAns"
- termCtl readln
- ;;
- esac
- ;;
- PAPER)
- eval runDialog \
- --menu \'\\n\\nChoose the default papersize definition for dvips.\\n\\n\' \
- 23 80 8 `texconfig dvips paper-list` \
- 2>"$tmpmenu"
- paper=`cat "$tmpmenu"`
- if test -n "$paper"; then
- logexec texconfig dvips paper "$paper"
- termCtl readln
- fi
- ;;
- GLOBAL)
- menuDvipsDest=ps
- ;;
- CHANGE)
- runDialog --inputbox "Printer name (for future settings of DEST / MODE / OFFSET)" 23 80 2>"$tmpmenu"
- menuDvipsAns=`cat $tmpmenu`
- case $menuDvipsAns in
- "") : ;;
- *) menuDvipsDest=$menuDvipsAns;;
- esac
- ;;
- ADD)
- runDialog --inputbox "Printer name (for printer to add)" 23 80 2>"$tmpmenu"
- menuDvipsAns=`cat $tmpmenu`
- case $menuDvipsAns in
- "") : ;;
- *)
- logexec texconfig dvips add $menuDvipsAns
- termCtl readln
- ;;
- esac
- ;;
- DEL)
- runDialog --inputbox "Printer name (for printer to delete)" 23 80 2>"$tmpmenu"
- menuDvipsAns=`cat $tmpmenu`
- case $menuDvipsAns in
- "") : ;;
- *)
- logexec texconfig dvips del $menuDvipsAns
- termCtl readln
- ;;
- esac
- ;;
- esac
- done
-}
-
-menuPaper()
-{
- runDialog \
- --menu "
-Select your default paper format.
-" \
- 23 80 14 \
- RETURN 'return to the main menu' \
- A4 'ISO A4 (210x297mm)' \
- LETTER 'US (8.5x11in)' 2>"$tmpmenu"
-
- p=`cat "$tmpmenu"`
- case $p in
- A4)
- logexec texconfig paper a4
- termCtl readln
- ;;
- LETTER)
- logexec texconfig paper letter
- termCtl readln
- ;;
- esac
-}
-
-menuHyphenation()
-{
- runDialog \
- --menu "
-Choose format to set up hyphenation for.
-" \
- 23 80 14 \
- `texconfig hyphen-list | sed 's@\(.*\)@\1 \1@'` 2>"$tmpmenu"
- p=`cat "$tmpmenu"`
- case $p in
- "")
- return
- ;;
- *)
- texconfig hyphen "$p"
- termCtl readln
- esac
-}
-
-# main()
-
-case $1 in
- help|--help)
- cat <<-eof
- Usage: $progname [--help|--version]
-eof
- exit 0
- ;;
- --version)
- cat <<-eof
- $progname version $version.
-eof
- exit 0
- ;;
-esac
-
-
-: ${TEXMFCONFIG=`kpsewhich -var-value=TEXMFCONFIG`}
-: ${TEXMFVAR=`kpsewhich -var-value=TEXMFVAR`}
-: ${TEXMFMAIN=`kpsewhich -var-value=TEXMFMAIN`}
-export TEXMFCONFIG TEXMFVAR TEXMFMAIN
-
-setupTmpDir
-echo "$progname: started `date`" > $log
-findDialog
-
-test -d "$TEXMFCONFIG" \
- || mktexdir "$TEXMFCONFIG" >/dev/null 2>&1 \
- || echo "$progname: directory \`$TEXMFCONFIG' (from TEXMFCONFIG variable) does not exist and cannot be created" >&2
-
-canWriteConfig=false
-if test -d "$TEXMFCONFIG"; then
- if test -w "$TEXMFCONFIG"; then
- canWriteConfig=true
- else
- echo "$progname: directory \`$TEXMFCONFIG' (from TEXMFCONFIG variable) is not writable."
- echo "$progname: configuration data cannot be changed." >&2
- fi
-fi
-
-test -d "$TEXMFVAR" \
- || mktexdir "$TEXMFVAR" >/dev/null 2>&1 \
- || echo "$progname: directory \`$TEXMFVAR' (from TEXMFVAR variable) does not exist and cannot be created" >&2
-
-canWriteVardata=false
-if test -d "$TEXMFVAR"; then
- if test -w "$TEXMFVAR"; then
- canWriteVardata=true
- else
- echo "$progname: directory \`$TEXMFVAR' (from TEXMFVAR variable) is not writable."
- echo "$progname: cached variable runtime data files cannot be written." >&2
- fi
-fi
-
-menuMain
-cleanup 0
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/texconfig-sys.sh b/Build/source/texk/texlive/linked_scripts/tetex/texconfig-sys.sh
deleted file mode 100755
index dd58513a6ea..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/texconfig-sys.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-# $Id$
-
-# texconfig-sys: Thomas Esser, public domain.
-
-# wrapper script for texconfig with TEXMFVAR and TEXMFCONFIG set to
-# TEXMFSYSVAR / TEXMFSYSCONFIG
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-v=`kpsewhich -var-value TEXMFSYSVAR`
-c=`kpsewhich -var-value TEXMFSYSCONFIG`
-
-TEXMFVAR="$v"
-TEXMFCONFIG="$c"
-export TEXMFVAR TEXMFCONFIG
-
-exec texconfig ${1+"$@"}
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/texconfig.1 b/Build/source/texk/texlive/linked_scripts/tetex/texconfig.1
deleted file mode 100644
index 8087f1e6dd1..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/texconfig.1
+++ /dev/null
@@ -1,215 +0,0 @@
-.TH texconfig 1 "August 2011" "TeX Live" "TeX Live"
-.SH NAME
-texconfig \- configures teTeX or TeX Live
-.LP
-texconfig-sys \- configures teTeX or TeX Live system\-wide
-.SH SYNOPSIS
-.B texconfig
-.LP
-.B texconfig
-[\fB commands\fR ...]
-.LP
-.B texconfig-sys
-.SH DESCRIPTION
-.I texconfig
-allows one to configure and maintain TeX
-in an easy and convenient manner, offering a series of dialog boxes to
-the user.
-.PP
-The
-.I tlmgr
-program has subsumed this function for TeX Live. This program
-is still supported, but the tlmgr interface is much more actively
-developed and tested.
-.PP
-After choosing settings or options, the appropriate files
-are changed automatically and the new settings are applied for the
-user. If needed, copies of files in
-.I TEXMFDIST
-or
-.I TEXMFMAIN
-will be made in the user's
-.I TEXMFCONFIG
-tree.
-.PP
-.I texconfig
-uses either the
-.IR whiptail (1)
-or
-.IR dialog (1)
-program to communicate with the user, so must be run in a terminal.
-.PP
-For making system-wide changes, which will apply to all users of TeX
-(for example, default paper size and so on), run
-.I texconfig-sys
-instead. Changed or generated files will be placed in
-.IR TEXMFSYSCONFIG .
-(You may need to be root to do this.)
-.PP
-.I texconfig
-also offers a non-interactive batch mode which can be accessed with
-the following commands
-.SH COMMANDS
-Commands that accept further options usually display available options
-if called without them. For example,
-.B texconfig dvipdfm paper
-will inform about valid paper settings.
-.PP
-.B
-.IP conf
-Display the system configuration.
-.PP
-.TP
-.B dvipdfm paper [letter|legal|ledger|tabloid|a4|a3]
-Set up dvipdfm to use papersize PAPER by default.
-.TP
-.B dvips add PRINTERNAME
-Create a new (empty) configuration file
-.I TEXMFCONFIG/dvips/config/config.PRINTERNAME.
-This file can later be filled with the
-.B mode, offset
-or
-.B printcmd
-options
-.TP
-.B dvips del PRINTERNAME
-Remove
-.I config.PRINTERNAME
-.TP
-.B dvips mode
-List available MetaFont modes.
-.TP
-.B dvips [-P PRINTER] mode MODE
-Change the MetaFont mode to
-.I MODE
-for
-.I PRINTER
-or for all output files
-.I (config.ps),
-if no
-.B -P
-option is given.
-.TP
-.B dvips [-P PRINTER] offset x-OFFSET,y-OFFSET
-Set printer offset for
-.I PRINTER
-or for all output files
-.I (config.ps),
-if no
-.B -P
-option is given. Offsets must be given with units, e.g.
-.I 0pt,10pt
-You can use testpage.tex from the LaTeX distribution to find these
-numbers.
-.TP
-.B dvips [-P PRINTER] printcmd CMD
-Set the printing command for
-.I PRINTER
-or for all output files
-.I (config.ps),
-if no
-.B -P
-option is given. Commands might be
-.B lp
-or
-.B lpr.
-See the description of the
-.I o
-option in
-.B info dvips
-or the
-.I -O
-option in
-.B dvips(1).
-.TP
-.B faq
-Display the list of Frequently Asked Questions about
-.B teTeX
-(and their answers).
-.TP
-.B font vardir DIR, font ro, font rw
-.TP
-.B formats
-This command allows to edit
-.B fmtutil.cnf(5)
-and (re)creates any new or changed formats afterwards.
-.TP
-.B hyphen FORMAT
-This command allows to edit the hyphenation configuration file for
-formats that support this, and recreates the formats afterwards to
-enable the new languages. Available formats are shown when no
-.I FORMAT
-is given.
-.IP
-Note that for formats that use LaTeX's
-.I language.dat,
- e.g.
-.I (pdf)jadetex
-and
-.I latex
-itself, this change is not persistent, since this file is a generated
-file. You should not use this command in these cases, read
-.B update-language(1)
-for alternatives.
-.TP
-.B init [format]
-Recreate
-.I format
-or all formats if none is given, and the font information. This is
-the same as calling
-.B fmtutil --byfmt format
-or
-.B fmtutil --all,
-respectively, followed by
-.B updmap.
-.TP
-.B mode-list
-List available printer modes, together with the printers they were
-developed for, and their DPI resolution
-.TP
-.B mode MODE
-Set the default printer mode in
-.I /etc/texmf/web2c/mktex.cnf
-or the respective user file in
-.I $TEXMFCONFIG/web2c
-to
-.B MODE.
-.TP
-.B paper [a4|letter]
-Set the default papersize for
-.B dvips, dvipdfm, pdftex
-and
-.B xdvi.
-The set is restricted because not all programs understand all sizes.
-.TP
-.B pdftex paper [a4|letter]
-Set the default paper size for
-.B pdftex.
-.TP
-.B rehash
-Call
-.B mktexlsr.
-.TP
-.B xdvi paper PAPER
-Set the default paper size for
-.B xdvi.
-The (long) list is available with
-.B texconfig xdvi paper.
-
-.SH ENVIRONMENT
-To let you change files,
-.B texconfig
-will open the editor specified in the VISUAL or EDITOR variables, or
-.B sensible-editor
-if both are unset.
-.SH "SEE ALSO"
-.IR whiptail (1),
-.IR dialog (1),
-.IR tlmgr (1),
-.IR tex (1),
-.IR mf (1),
-.IR vi (1),
-.IR EDITOR
-environment variable.
-.SH AUTHOR
-Thomas Esser
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/texconfig.sh b/Build/source/texk/texlive/linked_scripts/tetex/texconfig.sh
deleted file mode 100755
index c9cc73c8305..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/texconfig.sh
+++ /dev/null
@@ -1,1432 +0,0 @@
-#!/bin/sh
-
-# TeXConfig version 3.0
-# Originally written by Thomas Esser. Public domain.
-# Now maintained as part of TeX Live; correspondence to tex-live@tug.org.
-
-# invoke the right shell:
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-# initializations...
-progname=texconfig
-
-# the version string
-version='$Id$'
-
-envVars="
- AFMFONTS BIBINPUTS BSTINPUTS CMAPFONTS CWEBINPUTS ENCFONTS GFFONTS
- GLYPHFONTS INDEXSTYLE LIGFONTS MFBASES MFINPUTS MFPOOL MFTINPUTS
- MISCFONTS MPINPUTS MPMEMS MPPOOL MPSUPPORT OCPINPUTS OFMFONTS
- OPENTYPEFONTS OPLFONTS OTPINPUTS OVFFONTS OVPFONTS PDFTEXCONFIG PKFONTS
- PSHEADERS SFDFONTS T1FONTS T1INPUTS T42FONTS TEXBIB TEXCONFIG TEXDOCS
- TEXFONTMAPS TEXFONTS TEXFORMATS TEXINDEXSTYLE TEXINPUTS TEXMFCNF
- TEXMFDBS TEXMFINI TEXMFSCRIPTS TEXPICTS TEXPKS TEXPOOL TEXPSHEADERS
- TEXSOURCES TFMFONTS TRFONTS TTFONTS VFFONTS WEB2C WEBINPUTS
-"
-tmpdir=${TMPDIR-${TEMP-${TMP-/tmp}}}/tctmp.$$
-needsCleanup=false
-lastUpdatedFile=
-
-#
-###############################################################################
-# setupFMT(void) - find a suitable version of fmt / adjust
-#
-setupFMT()
-{
- case $FMT in
- "")
- FMT=fmt
- test ! -x /bin/fmt && test ! -f /usr/bin/fmt &&
- { test -x /bin/adjust || test -x /usr/bin/adjust; } && FMT=adjust
- ;;
- *)
- return
- ;;
- esac
-}
-
-###############################################################################
-# myFmt(args) - run $FMT
-#
-myFmt()
-{
- setupFMT
- $FMT ${1+"$@"}
-}
-
-###############################################################################
-# echoShowVariable(args ...)
-# show environment variables which names are as args and their values
-#
-echoShowVariable()
-{
- for esv
- do
- var=$esv
- eval val=\"\${$var+=}\${$var- is unset}\"
- echo "$var$val"
- done | grep -v 'is unset$'
-}
-
-###############################################################################
-# echoShowKpseVariable(args ...)
-# show kpathsea variables which names are as args and their values
-#
-echoShowKpseVariable()
-{
- for eskv
- do
- var=$eskv
- val=`kpsewhich -var-value="$eskv"`
- echo "$var=$val"
- done
-}
-
-###############################################################################
-# echoLocateBinary(args ...) - show where programs actually exist
-#
-echoLocateBinary()
-{
- for elb
- do
- elbLoc=`checkForBinary "$elb"`
- if test -n "$ELB_PATH_ONLY"; then
- test -n "$elbLoc" && echo "$elbLoc"
- else
- case $elbLoc in
- "") echo "$elb: not found";;
- *) echo "$elb: $elbLoc";;
- esac
- fi
- done
-}
-
-###############################################################################
-# echoLocateCfgfile(args ...) - show where files actually exist
-#
-echoLocateCfgfile()
-{
- for elc
- do
- case $elc in
- texmf.cnf) elcLoc=`kpsewhich $elc`;;
- *) elcLoc=`tcfmgr --cmd find --file "$elc"`;;
- esac
- case $elcLoc in
- "") echo "$elc: not found";;
- *) echo "$elcLoc";;
- esac
- done
-}
-
-###############################################################################
-# checkForBinary(prog) - echo full path of prog
-#
-checkForBinary()
-{
- cfbBinary=$1
-
- OLDIFS=$IFS
- IFS=:
- set x `echo "$PATH" | sed 's/^:/.:/; s/:$/:./; s/::/:.:/g'`; shift
- found=false
- for pathElem
- do
- case $pathElem in
- "") continue;;
- *) test -f "$pathElem/$cfbBinary" && { echo "$pathElem/$cfbBinary"; found=true; break; }
- esac
- done
- IFS=$OLDIFS
- case $found in
- true) (exit 0); return 0;;
- false) (exit 1); return 1;;
- esac
-}
-
-###############################################################################
-# cleanup() - clean up the temp area and exit with proper exit status
-#
-cleanup()
-{
- rc=$1
- $needsCleanup && test -n "$tmpdir" && test -d "$tmpdir" \
- && { cd / && rm -rf "$tmpdir"; }
- (exit $rc); exit $rc
-}
-
-###############################################################################
-# setupTmpDir() - set up a temp directory and a trap to remove it
-#
-setupTmpDir()
-{
- case $needsCleanup in
- true) return;;
- esac
-
- trap 'cleanup 1' 1 2 3 7 13 15
- needsCleanup=true
- (umask 077; mkdir "$tmpdir") \
- || abort "could not create directory \`$tmpdir'"
-}
-
-###############################################################################
-# setupTexmfmain() - get value for MT_TEXMFMAIN (with caching)
-#
-setupTexmfmain()
-{
- case $MT_TEXMFMAIN in
- "") MT_TEXMFMAIN=`kpsewhich -var-value=TEXMFMAIN`;;
- *) return;;
- esac
-}
-
-###############################################################################
-# setupTexmfmain() - get value for MT_TEXMFDIST (with caching)
-#
-setupTexmfdist()
-{
- case $MT_TEXMFDIST in
- "") MT_TEXMFDIST=`kpsewhich -var-value=TEXMFDIST`;;
- *) return;;
- esac
-}
-
-###############################################################################
-# setupTexmfvar() - get value for MT_TEXMFVAR (with caching)
-#
-setupTexmfvar()
-{
- case $MT_TEXMVAR in
- "") MT_TEXMVAR=`kpsewhich -var-value=TEXMFVAR`;;
- *) return;;
- esac
-}
-
-###############################################################################
-# setupSystexmf() - get value for MT_SYSTEXMF (with caching)
-#
-setupSystexmf()
-{
- case $MT_SYSTEXMF in
- "") MT_SYSTEXMF=`kpsewhich -var-value=SYSTEXMF`;;
- *) return;;
- esac
-}
-
-###############################################################################
-# abort(errmsg)
-# print `errmsg' to stderr and exit with error code 1
-#
-abort()
-{
- echo "$progname: $1." >&2
- cleanup 1
-}
-
-###############################################################################
-# mktexdir(args)
-# call mktexdir script, disable all features (to prevent sticky directories)
-#
-mktexdir()
-{
- setupTexmfmain
- MT_FEATURES=none "$MT_TEXMFMAIN/web2c/mktexdir" "$@" >&2
-}
-
-###############################################################################
-# tcfmgr(args) - call tcfmgr script
-#
-tcfmgr()
-{
- setupTexmfmain
- "$MT_TEXMFMAIN/texconfig/tcfmgr" "$@"
-}
-
-###############################################################################
-# mktexupd(args) - call mktexupd script
-#
-mktexupd()
-{
- setupTexmfmain
- "$MT_TEXMFMAIN/web2c/mktexupd" "$@"
-}
-
-###############################################################################
-# getRelDir(file)
-# matches file against SYSTEXMF. Returns relative directory of file within
-# a texmf tree in variable relPart.
-#
-getRelDir()
-{
- file=$1
- relPart=
-
- setupSystexmf
- OLDIFS=$IFS
- IFS='
-'
- set x `echo "$MT_SYSTEXMF" | tr : '
-'`; shift
- IFS=$OLDIFS
-
- # now loop over all components of SYSTEXMF
- for dir
- do
- test -n "$dir" || continue
- case "$file" in
- $dir/*)
- relPart=`echo "$file" | sed "s%$dir/*%%"`
- break
- ;;
- esac
- done
-
- # now check for success / failure
- case $relPart in
- ""|$file)
- # empty or full filename -> getRelDir failed!
- (exit 1); return 1
- ;;
- *)
- # relPart should just have the "dirname" part:
- relPart=`echo "$relPart" | sed 's%/*[^/]*$%%'`
- (exit 0); return 0
- ;;
- esac
-}
-
-###############################################################################
-# configReplace(file pattern line)
-# The first line in file that matches pattern gets replaced by line.
-# line will be added at the end of the file if pattern does not match.
-#
-configReplace()
-{
- configReplaceFile=$1; configReplacePat=$2; configReplaceLine=$3
-
- if grep "$configReplacePat" "$configReplaceFile" >/dev/null; then
- ed "$configReplaceFile" >/dev/null 2>&1 <<-eof
- /$configReplacePat/c
- $configReplaceLine
- .
- w
- q
-eof
- else
- echo "$configReplaceLine" >> $configReplaceFile
- fi
-}
-
-###############################################################################
-# fmgrConfigReplace (file regex value)
-# replaces line matching regex by value in file
-#
-fmgrConfigReplace()
-{
- fmgrConfigReplaceChanged=false
-
- moreArgs=""
- while
- case $1 in
- --*) moreArgs="$moreArgs $1 $2";;
- *) break;;
- esac
- do shift; shift; done
- fmgrConfigReplaceFile=$1
- fmgrConfigReplaceRegex=$2
- fmgrConfigReplaceValue=$3
-
- setupTmpDir
- co=`tcfmgr $moreArgs --tmp $tmpdir --cmd co --file $fmgrConfigReplaceFile`
- if test $? != 0; then
- echo "$progname: fmgrConfigReplace co failed for \`$fmgrConfigReplaceFile'" >&2
- (exit 1); return 1
- fi
- set x $co; shift
- fmgrConfigReplaceID=$1; fmgrConfigReplaceCfgFile=$3; fmgrConfigReplaceOrigFile=$4
- configReplace "$fmgrConfigReplaceCfgFile" "$fmgrConfigReplaceRegex" "$fmgrConfigReplaceValue"
- ci=`tcfmgr --tmp $tmpdir --cmd ci --id "$fmgrConfigReplaceID"`
- if test $? != 0; then
- echo "$progname: fmgrConfigReplace ci failed for \`$fmgrConfigReplaceFile'" >&2
- (exit 1); return 1
- fi
- case $ci in
- "") :;;
- $lastUpdatedFile)
- fmgrConfigReplaceChanged=true;;
- *) echo "$progname: updated configuration saved as file \`$ci'" >&2
- fmgrConfigReplaceChanged=true
- lastUpdatedFile=$ci;;
- esac
- (exit 0); return 0
-}
-
-###############################################################################
-# setupDvipsPaper(paper)
-# rearranges config.ps to make paper the first paper definition
-#
-setupDvipsPaper()
-{
- setupDvipsPaperChanged=false
- setupDvipsPaperFile=config.ps
- setupDvipsPaperDftPaper=$1
-
- setupTmpDir
- co=`tcfmgr --tmp $tmpdir --cmd co --file $setupDvipsPaperFile`
- if test $? != 0; then
- echo "$progname: setupDvipsPaper co failed for \`$setupDvipsPaperFile'" >&2
- (exit 1); return 1
- fi
- set x $co; shift
- setupDvipsPaperID=$1; setupDvipsPaperCfgFile=$3; setupDvipsPaperOrigFile=$4
-
- ed "$setupDvipsPaperCfgFile" > /dev/null 2>&1 <<-eof
- /@ /ka
- \$a
- @
- .
- /@ $setupDvipsPaperDftPaper /;/@ /-1m'a-1
- \$d
- w
- q
-eof
-
- ci=`tcfmgr --tmp $tmpdir --cmd ci --id "$setupDvipsPaperID"`
- if test $? != 0; then
- echo "$progname: setupDvipsPaper ci failed for \`$setupDvipsPaperFile'" >&2
- (exit 1); return 1
- fi
- case $ci in
- "") :;;
- $lastUpdatedFile)
- setupDvipsPaperChanged=true;;
- *) echo "$progname: updated configuration saved as file \`$ci'" >&2
- setupDvipsPaperChanged=true
- lastUpdatedFile=$ci;;
- esac
- (exit 0); return 0
-}
-
-###############################################################################
-# setupModesMfFile(void) - find modes.mf file (with caching)
-#
-setupModesMfFile()
-{
- case $modesMfFile in
- "")
- modesMfFile=`tcfmgr --cmd find --file modes.mf`
- ;;
- *)
- return
- ;;
- esac
-}
-
-###############################################################################
-# locateConfigPsFile(void) - find config.ps file (with caching)
-#
-locateConfigPsFile()
-{
- case $configPsFile in
- "")
- configPsFile=`tcfmgr --cmd find --file config.ps`
- ;;
- *)
- return
- ;;
- esac
-}
-
-###############################################################################
-# listMfModes(file) - list modes from modes.mf file
-#
-listMfModes()
-{
- grep mode_def "$modesMfFile" |
- sed -e "s/mode_def //" \
- -e "s/ .*%[^ ]* / '/" \
- -e "s/\$/' /" |
- egrep -v "^(help|%)" | sort
-}
-
-###############################################################################
-# listDvipsPapers(void) - list paper definitions from config.ps
-#
-listDvipsPapers()
-{
- grep '@ ' $configPsFile | sed "s/..//;s/ / '/;s/\$/' /"
-}
-
-###############################################################################
-# getFormatsForHyphen(void)
-# list all formats which have customizable hyphenation
-#
-getFormatsForHyphen()
-{
- fmtutil --catcfg | awk '$3 != "-" {print $1}' | sort
-}
-
-###############################################################################
-# getRes(mode) - print resolution (both X and Y axis) to metafont mode
-#
-getRes()
-{
- getResMode=$1
- (
- cd $tmpdir
- cat >mftmp.mf <<-'eof'
- let myexit = primitive_end_;
- mode_setup;
- string xdpi;
- xdpi := decimal round pixels_per_inch;
- message "XDPI = " & xdpi;
- string ydpi;
- ydpi := decimal round (pixels_per_inch * aspect_ratio);
- message "YDPI = " & ydpi;
- fontmaking := 0;
- myexit;
-eof
- mf '\mode='"$getResMode"'; \input ./mftmp' </dev/null \
- | awk '$1 == "XDPI" || $1 == "YDPI" { print $3 }'
- )
-}
-
-###############################################################################
-# checkElemInList(elem, list)
-# check if element exists in list
-###############################################################################
-checkElemInList()
-{
- checkElemInListElem=$1; shift
- checkElemInListFound=false
- for checkElemInListIter
- do
- case "x$checkElemInListElem" in
- x$checkElemInListIter)
- checkElemInListFound=true
- break
- ;;
- esac
- done
- case $checkElemInListFound in
- true) (exit 0); return 0;;
- esac
- (exit 1); return 1
-}
-
-
-# show version information from the distribution, if we have any.
-showDistVersionInfo()
-{
- # TeX Live file.
- test -f $MT_TEXMFMAIN/../release-texlive.txt \
- && sed 1q $MT_TEXMFMAIN/../release-texlive.txt
-
- # no harm in continuing to look for the teTeX files.
- test -f $MT_TEXMFMAIN/release-tetex-src.txt \
- && "teTeX-src release: `cat $MT_TEXMFMAIN/release-tetex-src.txt`"
- test -f $MT_TEXMFDIST/release-tetex-texmf.txt \
- && "teTeX-texmf release: `cat $MT_TEXMFDIST/release-tetex-texmf.txt`"
-}
-
-#
-###############################################################################
-# tcBatch(args)
-# handle batch mode
-###############################################################################
-tcBatch()
-{
- help="texconfig supports adjusting and updating many aspects of
-the TeX installation.
-
-Usage: $progname conf (show configuration information)
- $progname dvipdfmx paper PAPER (dvipdfmx paper size)
- $progname dvipdfm paper PAPER (dvipdfm paper size)
- $progname dvips [OPTION...] (dvips options)
- $progname faq (show teTeX faq)
- $progname findprog PROG... (show locations of PROGs, a la which)
- $progname font vardir DIR
- $progname font ro
- $progname font rw
- $progname formats (edit fmtutil.cnf)
- $progname help (or --help; show this help)
- $progname hyphen FORMAT (edit hyphenation config for FORMAT)
- $progname init [FORMAT]... (rebuild FORMATs, or all formats
- plus run texlinks and updmap)
- $progname mode MODE (set Metafont MODE)
- $progname paper PAPER (set default paper size to PAPER)
- $progname pdftex [OPTION]... (pdftex options)
- $progname rehash (rebuild ls-R files with mktexlsr)
- $progname version (or --version; show version info)
- $progname xdvi paper PAPER (xdvi paper size)
-
-Get more help with:
- $progname dvipdfmx
- $progname dvipdfm
- $progname dvips
- $progname font
- $progname hyphen
- $progname mode
- $progname paper
- $progname pdftex
- $progname xdvi
-
-Report bugs to: tex-k@tug.org
-TeX Live home page: <http://tug.org/texlive/>
-"
-
- case $1 in
- # texconfig conf
- conf|confall)
- setupTexmfmain
- setupTexmfdist
- echo '=========================== version information =========================='
- showDistVersionInfo
- echo
- echo '==================== binaries found by searching $PATH ==================='
- echo "PATH=$PATH"
- echoLocateBinary kpsewhich updmap fmtutil texconfig tex pdftex mktexpk dvips dvipdfm
- echo
- echo '=========================== active config files =========================='
- echoLocateCfgfile texmf.cnf updmap.cfg fmtutil.cnf config.ps mktex.cnf XDvi pdftexconfig.tex config | sort -k 2
- echo
- echo '============================= font map files ============================='
- for m in psfonts.map pdftex.map ps2pk.map dvipdfm.map; do
- echo "$m: `kpsewhich $m`"
- done
- echo
- echo '=========================== kpathsea variables ==========================='
- echoShowKpseVariable TEXMFMAIN TEXMFDIST TEXMFLOCAL TEXMFSYSVAR TEXMFSYSCONFIG TEXMFVAR TEXMFCONFIG TEXMFHOME VARTEXFONTS TEXMF SYSTEXMF TEXMFDBS WEB2C TEXPSHEADERS TEXCONFIG ENCFONTS TEXFONTMAPS
-
- echo
- echo '==== kpathsea variables from environment only (ok if no output here) ===='
- echoShowVariable $envVars
- ;;
-
- # texconfig dvipdfm
- dvipdfm)
- help="Usage: $progname dvipdfm paper PAPER
-
-Valid PAPER settings:
- letter legal ledger tabloid a4 a3"
- case $2 in
- # texconfig dvipdfm paper
- paper-list)
- for p in letter legal ledger tabloid a4 a3; do echo $p; done
- ;;
- paper)
- case $3 in
- letter|legal|ledger|tabloid|a4|a3)
- fmgrConfigReplace config '^p' "p $3";;
- "") echo "$help" >&2; rc=1;;
- *)
- echo "$progname: unknown PAPER \`$3' given as argument for \`$progname dvipdfm paper'" >&2
- echo "$progname: try \`$progname dvipdfm paper' for help" >&2
- rc=1 ;;
- esac ;;
- # texconfig dvipdfm ""
- "")
- echo "$help" >&2; rc=1 ;;
- # texconfig dvipdfm <unknown>
- *)
- echo "$progname: unknown option \`$2' given as argument for \`$progname dvipdfm'" >&2
- echo "$progname: try \`$progname dvipdfm' for help" >&2
- rc=1
- ;;
- esac
- ;;
-
- # texconfig dvipdfmx
- dvipdfmx)
- help="Usage: $progname dvipdfmx paper PAPER
-
-Valid PAPER settings:
- letter legal ledger tabloid a4 a3"
- case $2 in
- # texconfig dvipdfmx paper
- paper-list)
- for p in letter legal ledger tabloid a4 a3; do echo $p; done
- ;;
- paper)
- case $3 in
- letter|legal|ledger|tabloid|a4|a3)
- fmgrConfigReplace dvipdfmx.cfg '^p' "p $3";;
- "") echo "$help" >&2; rc=1;;
- *)
- echo "$progname: unknown PAPER \`$3' given as argument for \`$progname dvipdfmx paper'" >&2
- echo "$progname: try \`$progname dvipdfmx paper' for help" >&2
- rc=1 ;;
- esac ;;
- # texconfig dvipdfmx ""
- "")
- echo "$help" >&2; rc=1 ;;
- # texconfig dvipdfmx <unknown>
- *)
- echo "$progname: unknown option \`$2' given as argument for \`$progname dvipdfmx'" >&2
- echo "$progname: try \`$progname dvipdfmx' for help" >&2
- rc=1
- ;;
- esac
- ;;
-
- # texconfig dvips
- dvips)
- shift
- help="Usage: $progname dvips add PRINTER
- $progname dvips del PRINTER
- $progname dvips paper PAPER
- $progname dvips [-P PRINTER] mode MODE
- $progname dvips [-P PRINTER] offset OFFSET
- $progname dvips [-P PRINTER] printcmd CMD"
- case $1 in
- -P)
- case $2 in
- "")
- echo "$progname: missing arg for parameter -P" >&2
- rc=1; (exit $rc); return $rc
- ;;
- *)
- otherPrinter=true
- otherPrinterName=$2
- otherPrinterFile=`kpsewhich -format='dvips config' "config.$otherPrinterName"`
- case $otherPrinterFile in
- "")
- echo "$progname: configuration file \`config.$otherPrinterName' for printer \`$otherPrinterName' not found" >&2
- rc=1; (exit $rc); return $rc
- ;;
- *) shift; shift;;
- esac
- ;;
- esac
- ;;
- *)
- otherPrinter=false
- ;;
- esac
- case $otherPrinter in
- true)
- tcBatchDvipsPrinter=$otherPrinterName
- moreFmgrArgs="--reldir dvips/config --infile $otherPrinterFile"
- ;;
- *)
- tcBatchDvipsPrinter=ps
- ;;
- esac
- case $1 in
- add)
- case $2 in
- "")
- echo "Usage: $progname dvips add PRINTER" >&2
- rc=1
- ;;
- *)
- printerName=$2
- pFile=`kpsewhich -format='dvips config' "config.$printerName"`
- case $pFile in
- "")
- setupTmpDir
- tcfRet=`tcfmgr --emptyinfile --reldir dvips/config --cmd co --tmp $tmpdir --file "config.$printerName"`
- if test $? != 0; then
- echo "$progname: failed to add new configuration file \`config.$printerName'" >&2
- rc=1
- else
- set x $tcfRet; shift
- tcBatchDvipsAddID=$1; tcBatchDvipsAddFile=$3
- echo "% file config.$printerName; added by texconfig" > "$tcBatchDvipsAddFile"
- tcfRet=`tcfmgr --tmp $tmpdir --id "$tcBatchDvipsAddID" --cmd ci`
- if test $? != 0; then
- echo "$progname: failed to add new configuration file \`config.$printerName'" >&2
- rc=1
- else
- echo "$progname: file $tcfRet added" >&2
- fi
- fi
- ;;
- *)
- echo "$progname: configuration file for printer \`$printerName' already exists (\`$pFile')" >&2
- rc=1
- ;;
- esac
- ;;
- esac
- ;;
- del)
- case $2 in
- "")
- echo "Usage: $progname dvips del PRINTER" >&2
- rc=1
- ;;
- *)
- printerName=$2
- pFile=`kpsewhich -format='dvips config' "config.$printerName"`
- case $pFile in
- "")
- echo "$progname: configuration file for printer \`$printerName' (config.$printerName) not found" >&2
- rc=1
- ;;
- *)
- if rm "$pFile"; then
- echo "$progname: file \`$pFile' removed" >&2
- else
- echo "$progname: failed to remove file \`$pFile'" >&2
- rc=1
- fi
- ;;
- esac
- ;;
- esac
- ;;
- paper-list)
- locateConfigPsFile
- listDvipsPapers
- ;;
- paper)
- case $2 in
- "")
- echo "Usage: $progname dvips paper PAPER" >&2
- echo >&2; echo "Valid PAPER settings:" >&2
- locateConfigPsFile
- listDvipsPapers | sed 's@ .*@@; s@^@ @' | myFmt
- rc=1
- ;;
- *)
- tcBatchDvipsPaper=$2
- locateConfigPsFile
- case "$configPsFile" in
- "")
- echo "$progname: file config.ps not found" >&2; rc=1
- ;;
- *)
- if grep "@ $tcBatchDvipsPaper " $configPsFile >/dev/null 2>&1; then
- setupDvipsPaper "$tcBatchDvipsPaper"
- else
- echo "$progname: paper \`$tcBatchDvipsPaper' not found in file \`$configPsFile'" >&2; rc=1
- fi
- ;;
- esac
- ;;
- esac
- ;;
- mode)
- case $2 in
- "")
- echo "Usage: $progname dvips mode MODE
-
-Valid MODE settings:"
- setupModesMfFile
- listMfModes | sed 's@ .*@@; s@^@ @' | myFmt
- rc=1
- ;;
- *)
- tcBatchDvipsMode=$2
- setupTmpDir
- setupModesMfFile
- if checkElemInList "$tcBatchDvipsMode" `listMfModes | sed 's@ .*@@'`; then
- set x `getRes "$tcBatchDvipsMode"`; shift
- resX=$1; resY=$2
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^M' "M $tcBatchDvipsMode"
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^D' "D $resX"
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^X' "X $resX"
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^Y' "Y $resY"
- else
- echo "$progname: unknown MODE \`$tcBatchDvipsMode' given as argument for \`$progname dvips mode'" >&2
- echo "$progname: try \`$progname dvips mode' for help" >&2
- rc=1
- fi
- ;;
- esac
- ;;
- offset)
- offset=$2
- case $offset in
- "")
- echo "Usage: $progname dvips offset OFFSET"
- rc=1
- ;;
- *)
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^O' "O $offset"
- esac
- ;;
- printcmd)
- printcmd=$2
- case $printcmd in
- "")
- echo "Usage: $progname dvips printcmd CMD"
- rc=1
- ;;
- -)
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^o' o
- ;;
- *)
- fmgrConfigReplace $moreFmgrArgs config.$tcBatchDvipsPrinter '^o' "o |$printcmd"
- ;;
- esac
- ;;
- "")
- echo "$help" >&2; rc=1
- ;;
- *)
- echo "$progname: unknown option \`$1' given as argument for \`$progname dvips'" >&2
- echo "$progname: try \`$progname dvips' for help" >&2
- rc=1
- ;;
- esac
- ;;
-
- faq)
- setupTexmfmain
- if test -f $MT_TEXMFMAIN/doc/tetex/teTeX-FAQ; then
- <$MT_TEXMFMAIN/doc/tetex/teTeX-FAQ eval ${PAGER-more}
- else
- echo "$progname: faq not found (usually in \$TEXMFMAIN/doc/tetex/teTeX-FAQ)" >&2
- rc=1
- fi
- ;;
-
- findprog)
- shift
- ELB_PATH_ONLY=1 echoLocateBinary "$@"
- ;;
-
- # handle "texconfig font"
- font)
- help="Usage: $progname font vardir DIR
- $progname font ro
- $progname font rw
-
-The vardir option changes the VARTEXFONTS variable in the texmf.cnf file.
-
-The rw option makes the VARTEXFONTS directory (and subtrees pk, tfm,
-source) world writable and sets the features appendonlydir:varfonts
-in mktex.cnf.
-
-The ro option makes the VARTEXFONTS directory (and subtrees pk, tfm,
-source) writable for the owner only and sets the feature texmfvar in
-mktex.cnf.
-
-For more information about these \`features', consult the teTeX manual
-(e.g. by running \`texdoc TETEXDOC')."
-
- case $2 in
- vardir)
- case $3 in
- "")
- echo "$help" >&2
- rc=1
- ;;
- *)
- tcBatchFontVardir=$3
- tfc=`kpsewhich texmf.cnf`
- if test -n "$tfc"; then
- if test -w "$tfc"; then
- configReplace "$tfc" '^VARTEXFONTS' "VARTEXFONTS = $tcBatchFontVardir"
- else
- echo "$progname: setting up vardir failed. Reason: no permission to write file \`$tfc'" >&2
- rc=1
- fi
- else
- echo "$progname: setting up vardir failed. Reason: failed to find file texmf.cnf" >&2
- rc=1
- fi
- ;;
- esac
- ;;
- rw)
- MT_VARTEXFONTS=`kpsewhich -var-value VARTEXFONTS`
- if test -z "$MT_VARTEXFONTS"; then
- echo "$progname: failed to set \`font rw'; reason: could not determine VARTEXFONTS variable." >&2; rc=1
- return
- fi
- test -d "$MT_VARTEXFONTS" || mktexdir "$MT_VARTEXFONTS"
- if test ! -d "$MT_VARTEXFONTS"; then
- echo "$progname: failed to set \`font rw'; reason: directory \`$MT_VARTEXFONTS' does not exist." >&2; rc=1
- return
- fi
- chmod 1777 "$MT_VARTEXFONTS" || {
- echo "$progname: failed to modify permissions in \`$MT_VARTEXFONTS'." >&2; rc=1
- return;
- }
- (
- cd "$MT_VARTEXFONTS" || exit
- echo "$progname: modifying permissions in \`$MT_VARTEXFONTS' ..." >&2
- for d in pk tfm source; do
- test -d "$d" && find $d -type d -exec chmod 1777 '{}' \;
- done
- echo "$progname: all permissions set." >&2
- )
- setupTmpDir
- fmgrConfigReplace mktex.cnf '^: ..MT_FEATURES=' ": \${MT_FEATURES=appendonlydir:varfonts}"
- ;;
- ro)
- MT_VARTEXFONTS=`kpsewhich -var-value VARTEXFONTS`
- if test -z "$MT_VARTEXFONTS"; then
- echo "$progname: failed to set \`font ro'; reason: could not determine VARTEXFONTS variable." >&2; rc=1
- return
- fi
- test -d "$MT_VARTEXFONTS" || mktexdir "$MT_VARTEXFONTS"
- if test ! -d "$MT_VARTEXFONTS"; then
- echo "$progname: failed to set \`font ro'; reason: directory \`$MT_VARTEXFONTS' does not exist." >&2; rc=1
- return
- fi
- chmod 755 "$MT_VARTEXFONTS" || {
- echo "$progname: failed to modify permissions in \`$MT_VARTEXFONTS'." >&2; rc=1
- return;
- }
- (
- cd "$MT_VARTEXFONTS" || exit
- echo "$progname: modifying permissions in \`$MT_VARTEXFONTS' ..." >&2
- for d in pk tfm source; do
- test -d "$d" && find "$d" -type d -exec chmod 755 '{}' \;
- done
- echo "$progname: all permissions set." >&2
- )
- setupTmpDir
- fmgrConfigReplace mktex.cnf '^: ..MT_FEATURES=' ": \${MT_FEATURES=texmfvar}"
- ;;
- "") echo "$help" >&2; rc=1;;
- *) echo "$progname: unknown option \`$2' given as argument for \`$progname font'" >&2
- echo "$progname: try \`$progname font' for help" >&2
- rc=1
- ;;
- esac
- ;;
-
- formats)
- cat >&2 <<EOM
-texconfig formats is no longer supported, because manual edits of
-fmtutil.cnf will be overwritten by the new TeX Live package manager,
-tlmgr, which regenerates that file as needed upon package changes.
-Thus, to add or remove formats, the recommended method is to use tlmgr
-to add or remove the appropriate package.
-
-If you need to make manual additions, you can edit the file
-fmtutil-local.cnf under TEXMFLOCAL. Further information with
-tlmgr --help and at http://tug.org/texlive/tlmgr.html.
-
-Exiting.
-EOM
- exit 1 # but leave the real code for posterity
-
- setupTmpDir
- echo "$progname: analyzing old configuration..." >&2
- fmtutil --catcfg > $tmpdir/pre
- fmtutil --edit
- echo "$progname: analyzing new configuration..." >&2
- fmtutil --catcfg > $tmpdir/post
-
- if cmp $tmpdir/pre $tmpdir/post >/dev/null 2>&1; then
- echo "$progname: no new/updated formats available ..." >&2
- else
- echo "$progname: updating formats ..." >&2
- comm -13 $tmpdir/pre $tmpdir/post > $tmpdir/addOrChange
- for i in `awk '{print $1}' $tmpdir/addOrChange`; do
- fmtutil --byfmt "$i" || rc=1
- done
- texlinks --multiplatform || rc=1
- fi
- ;;
-
- help|--help|-h)
- echo "$help"
- ;;
-
- # "hyphen FORMAT"
- hyphen)
- cat >&2 <<EOM
-texconfig hyphen is no longer supported, because manual edits of
-language.dat (or language.def) will be overwritten by the new TeX Live
-package manager, tlmgr, which regenerates those configuration files as
-needed upon package changes. Thus, to add or remove hyphenation
-patterns, the recommended method is to use tlmgr to add or remove the
-appropriate package.
-
-If you need to make manual additions, you can edit the files
-language-local.dat and language-local.def under TEXMFLOCAL. Further
-information with tlmgr --help and at http://tug.org/texlive/tlmgr.html.
-
-Exiting.
-EOM
- exit 1 # but leave the real code for posterity
-
- tcBatchHyphenFormat=$2
- formatsForHyphen=`getFormatsForHyphen`
- formatsForHyphenFmt=`echo "$formatsForHyphen" | myFmt | sed 's@^@ @'`
- help="Usage: $progname hyphen FORMAT
-
-Valid FORMATs are:
-$formatsForHyphenFmt"
- case $tcBatchHyphenFormat in
- "")
- echo "$help" >&2; rc=1
- ;;
- *)
- if checkElemInList "$tcBatchHyphenFormat" $formatsForHyphen; then
-
- tcBatchHyphenFile=`fmtutil --showhyphen "$tcBatchHyphenFormat"`
- case $tcBatchHyphenFile in
- "")
- echo "$progname: could not find hyphen setup file for format \`$tcBatchHyphenFormat'" >&2
- rc=1
- return
- ;;
- esac
-
- getRelDir "$tcBatchHyphenFile"
- case $relPart in
- "")
- # edit tcBatchHyphenFile directly
- tcBatchHFID=
- setupTmpDir
- tcBatchHFEdit=$tcBatchHyphenFile
- tcBatchHFOrig=$tmpdir/hforig
- cp "$tcBatchHyphenFile" "$tcBatchHFOrig"
- ;;
- *)
- # use tcfmgr
- tcBatchHyphenFileBasename=`echo "$tcBatchHyphenFile" | sed 's@.*/@@'`
- setupTmpDir
- co=`tcfmgr --tmp $tmpdir --cmd co --file "$tcBatchHyphenFileBasename" --reldir "$relPart" --infile "$tcBatchHyphenFile"`
- if test $? != 0; then
- echo "$progname: failed to check out file \`$tcBatchHyphenFile'" >&2
- rc=1
- return 1
- else
- set x $co; shift
- tcBatchHFID=$1; tcBatchHFEdit=$3; tcBatchHFOrig=$4
- fi
- ;;
- esac
- ${VISUAL-${EDITOR-vi}} "$tcBatchHFEdit"
- if cmp "$tcBatchHFEdit" "$tcBatchHFOrig" >/dev/null 2>&1; then
- echo "$progname: configuration unchanged." >&2
- else
- case $tcBatchHFID in
- "")
- tcBatchHFOut=$tcBatchHFEdit
- echo "$progname: updated configuration saved as file \`$tcBatchHFOut'" >&2
- lastUpdatedFile=$ci
- ;;
- *)
- ci=`tcfmgr --tmp $tmpdir --cmd ci --id "$tcBatchHFID"`
- if test $? != 0; then
- echo "$progname: failed to check in file \`$tcBatchHyphenFileBasename'" >&2
- rc=1
- return
- else
- tcBatchHFOut=$ci
- echo "$progname: updated configuration saved as file \`$tcBatchHFOut'" >&2
- lastUpdatedFile=$ci
- fi
- ;;
- esac
- fmtutil --byhyphen "$tcBatchHFOut"
- fi
- else
- echo "$progname: invalid format \`$tcBatchHyphenFormat' specified as argument for \`$progname hyphen'" >&2
- echo "$progname: for getting help, try \`$progname hyphen'" >&2
- rc=1
- fi
- ;;
- esac
- ;;
-
- hyphen-list)
- getFormatsForHyphen
- ;;
-
- init)
- case $2 in
- "")
- if fmtutil --all \
- && texlinks --multiplatform \
- && updmap; then
- :
- else
- rc=1
- fi
- ;;
- *)
- shift 1
- for i in "$@"; do
- fmtutil --byfmt "$i" || rc=1
- done
- ;;
- esac
- ;;
-
- mode-list)
- setupModesMfFile
- listMfModes
- ;;
-
- mode)
- case $2 in
- "")
- echo "Usage: $progname mode MODE
-
-Valid MODE settings:"
- setupModesMfFile
- listMfModes | sed 's@ .*@@; s@^@ @' | myFmt
- rc=1
- ;;
- *)
- tcBatchMode=$2
- setupModesMfFile
- if checkElemInList $tcBatchMode `listMfModes | sed 's@ .*@@'`; then
-
- # modify mktex.cnf
- setupTmpDir
- fmgrConfigReplace mktex.cnf '^: ..MODE=' ": \${MODE=$tcBatchMode}"
- set x `getRes "$tcBatchMode"`; shift
- tcBatchRes=$1
- fmgrConfigReplace mktex.cnf '^: ..BDPI=' ": \${BDPI=$tcBatchRes}"
-
- if checkForBinary dvips >/dev/null && tcfmgr --cmd find --file config.ps >/dev/null 2>&1; then
- tcBatch dvips mode "$tcBatchMode"
- fi
- if checkForBinary pdftex >/dev/null && tcfmgr --cmd find --file pdftexconfig.tex >/dev/null 2>&1; then
- tcBatch pdftex mode "$tcBatchMode"
- fi
- else
- echo "$progname: unknown mode \`$tcBatchMode' specified as argument for \`$progname mode'" >&2; rc=1
- fi
- ;;
- esac
- ;;
-
- paper)
- help="Usage: $progname paper PAPER
-
-Valid PAPER settings:
- letter a4"
-
- p=$2; pXdvi=$2; pDvips=$2
- case $2 in
- letter)
- pXdvi=us;;
- a4)
- pXdvi=a4;;
- "") echo "$help" >&2; rc=1; return;;
- *)
- echo "$progname: unknown PAPER \`$2' given as argument for \`$progname paper'" >&2
- echo "$progname: try \`$progname paper' for help" >&2
- rc=1
- return;;
- esac
- if checkForBinary dvips >/dev/null && tcfmgr --cmd find --file config.ps >/dev/null 2>&1; then
- tcBatch dvips paper $pDvips
- fi
- if checkForBinary dvipdfm >/dev/null && tcfmgr --cmd find --file config >/dev/null 2>&1; then
- tcBatch dvipdfm paper $p
- fi
- if checkForBinary dvipdfmx >/dev/null && tcfmgr --cmd find --file dvipdfmx.cfg >/dev/null 2>&1; then
- tcBatch dvipdfmx paper $p
- fi
- if checkForBinary xdvi >/dev/null && tcfmgr --cmd find --file XDvi >/dev/null 2>&1; then
- tcBatch xdvi paper $pXdvi
- fi
- if checkForBinary pdftex >/dev/null && tcfmgr --cmd find --file pdftexconfig.tex >/dev/null 2>&1; then
- tcBatch pdftex paper $p
- fi
- ;;
-
- pdftex)
- help="Usage: $progname pdftex paper PAPER
-
-Valid PAPER settings:
- a4 letter"
- case $2 in
-
- mode)
- case $3 in
- "")
- echo "Usage: $progname pdftex mode MODE"
- rc=1
- ;;
- *)
- tcBatchPdftexMode=$3
- setupTmpDir
- setupModesMfFile
- if checkElemInList "$tcBatchPdftexMode" `listMfModes | sed 's@ .*@@'`; then
- set x `getRes "$tcBatchPdftexMode"`; shift
- fmgrConfigReplace pdftexconfig.tex 'pdfpkresolution' "\\pdfpkresolution=$1"
- if $fmgrConfigReplaceChanged; then
- fmtutil --refresh
- fi
- else
- echo "$progname: unknown MODE \`$tcBatchPdftexMode' given as argument for \`$progname pdftex mode'" >&2
- rc=1
- fi
- ;;
- esac
- ;;
-
- paper)
- case $3 in
- letter)
- w="8.5 true in"; h="11 true in"
- setupTmpDir
- fmgrConfigReplace pdftexconfig.tex pdfpagewidth '\pdfpagewidth='"$w"
- wChanged=$fmgrConfigReplaceChanged
- fmgrConfigReplace pdftexconfig.tex pdfpageheight '\pdfpageheight='"$h"
- if $wChanged || $fmgrConfigReplaceChanged; then
- fmtutil --refresh
- fi
- ;;
- a4)
- w="210 true mm"; h="297 true mm"
- fmgrConfigReplace pdftexconfig.tex pdfpagewidth '\pdfpagewidth='"$w"
- wChanged=$fmgrConfigReplaceChanged
- fmgrConfigReplace pdftexconfig.tex pdfpageheight '\pdfpageheight='"$h"
- if $wChanged || $fmgrConfigReplaceChanged; then
- fmtutil --refresh
- fi
- ;;
- "") echo "$help" >&2; rc=1;;
- *)
- echo "$progname: unknown PAPER \`$3' given as argument for \`$progname pdftex paper'" >&2
- echo "$progname: try \`$progname pdftex paper' for help" >&2
- rc=1 ;;
- esac ;;
- "")
- echo "$help" >&2; rc=1;;
- *)
- echo "$progname: unknown option \`$2' given as argument for \`$progname pdftex'" >&2
- echo "$progname: try \`$progname pdftex' for help" >&2
- rc=1
- ;;
- esac
- ;;
-
- rehash)
- mktexlsr
- ;;
-
- #
- version|--version)
- echo "$progname version $version"
- setupTexmfmain
- setupTexmfdist
- showDistVersionInfo
- (exit 0); exit 0;;
-
- # handle "xdvi paper PAPER"
- xdvi)
- tcBatchXdviPapers='us "8.5x11"
-usr "11x8.5"
-legal "8.5x14"
-foolscap "13.5x17.0"
-a1 "59.4x84.0cm"
-a2 "42.0x59.4cm"
-a3 "29.7x42.0cm"
-a4 "21.0x29.7cm"
-a5 "14.85x21.0cm"
-a6 "10.5x14.85cm"
-a7 "7.42x10.5cm"
-a1r "84.0x59.4cm"
-a2r "59.4x42.0cm"
-a3r "42.0x29.7cm"
-a4r "29.7x21.0cm"
-a5r "21.0x14.85cm"
-a6r "14.85x10.5cm"
-a7r "10.5x7.42cm"
-b1 "70.6x100.0cm"
-b2 "50.0x70.6cm"
-b3 "35.3x50.0cm"
-b4 "25.0x35.3cm"
-b5 "17.6x25.0cm"
-b6 "13.5x17.6cm"
-b7 "8.8x13.5cm"
-b1r "100.0x70.6cm"
-b2r "70.6x50.0cm"
-b3r "50.0x35.3cm"
-b4r "35.3x25.0cm"
-b5r "25.0x17.6cm"
-b6r "17.6x13.5cm"
-b7r "13.5x8.8cm"
-c1 "64.8x91.6cm"
-c2 "45.8x64.8cm"
-c3 "32.4x45.8cm"
-c4 "22.9x32.4cm"
-c5 "16.2x22.9cm"
-c6 "11.46x16.2cm"
-c7 "8.1x11.46cm"
-c1r "91.6x64.8cm"
-c2r "64.8x45.8cm"
-c3r "45.8x32.4cm"
-c4r "32.4x22.9cm"
-c5r "22.9x16.2cm"
-c6r "16.2x11.46cm"
-c7r "11.46x8.1cm"'
- help="Usage: $progname xdvi paper PAPER
-
-Valid PAPER settings:
- a1 a1r a2 a2r a3 a3r a4 a4r a5 a5r a6 a6r a7 a7r
- b1 b1r b2 b2r b3 b3r b4 b4r b5 b5r b6 b6r b7 b7r
- c1 c1r c2 c2r c3 c3r c4 c4r c5 c5r c6 c6r c7 c7r
- foolscap legal us usr"
- case $2 in
- paper-list)
- echo "$tcBatchXdviPapers"
- ;;
- paper)
- case $3 in
- a1|a1r|a2|a2r|a3|a3r|a4|a4r|a5|a5r|a6|a6r|a7|a7r|b1|b1r|b2|b2r|b3|b3r|b4|b4r|b5|b5r|b6|b6r|b7|b7r|c1|c1r|c2|c2r|c3|c3r|c4|c4r|c5|c5r|c6|c6r|c7|c7r|foolscap|legal|us|usr)
- fmgrConfigReplace XDvi paper: "*paper: $3"
- ;;
- "") echo "$help" >&2; rc=1;;
- *)
- echo "$progname: unknown PAPER \`$3' given as argument for \`$progname xdvi paper'" >&2
- echo "$progname: try \`$progname xdvi paper' for help" >&2
- rc=1 ;;
- esac ;;
- "")
- echo "$help" >&2; rc=1;;
- *)
- echo "$progname: unknown option \`$2' given as argument for \`$progname xdvi'" >&2
- echo "$progname: try \`$progname xdvi' for help" >&2
- rc=1
- ;;
- esac
- ;;
- *)
- echo "$progname: unknown option \`$1' given as argument for \`$progname'" >&2
- echo "$progname: try \`$progname help' for help" >&2
- rc=1
- esac
-}
-
-###############################################################################
-# tcInteractive(void)
-# handle interactive mode
-###############################################################################
-tcInteractive()
-{
- texconfig-dialog
-}
-
-###############################################################################
-# main()
-###############################################################################
-rc=0
-case $# in
- 0) tcInteractive;;
- *) tcBatch "$@";;
-esac
-
-cleanup $rc
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/texlinks.1 b/Build/source/texk/texlive/linked_scripts/tetex/texlinks.1
deleted file mode 100644
index 75e7effcb15..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/texlinks.1
+++ /dev/null
@@ -1,66 +0,0 @@
-.TH "texlinks" "8" "November 2007" "teTeX" "teTeX"
-.PP
-.SH "NAME"
-texlinks \- maintain symbolic links from format to engine
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBtexlinks\fP [ \fIOPTIONS\fP\&.\&.\&. ] \fIDIRECTORIES\fP\&.\&.\&.
-.PP
-.SH "DESCRIPTION"
-.PP
-\fBtexlinks\fP is used to create or recreate symbolic links from
-formats to engines according to the information in
-\fIfmtutil\&.cnf\fP or a file specified with \fB--cnffile\fP\&.
-.PP
-\fIDIRECTORIES\fP is an optional list of directories in which to
-operate\&. If no directories are specified the list of directories
-depends on the \fB--multiplatform\fP option\&.
-.PP
-.SH "OPTIONS"
-.PP
-.IP "\fB--cnffile\fP \fIFILE\fP or \fB-f\fP \fIFILE\fP"
-use file as configuration file (default:
-\fIfmtutil\&.cnf\fP)
-.IP "\fB--help\fP or \fB-h\fP"
-show some help text
-.IP "\fB--multiplatform\fP or \fB-m\fP"
-operate in all
-platform-specific directories (default:
-operate only in the directory for this
-platform)
-.IP "\fB--silent\fP or \fB-s\fP"
-silently skip over existing
-scripts/binaries instead of printing a warning
-.IP "\fB--unlink\fP or \fB-u\fP"
-Unlink previously created symlinks
-.IP "\fB--verbose\fP or \fB-v\fP"
-+set verbose mode on (default: off)
-.PP
-.SH "FILES"
-.PP
-.IP "\fIfmtutil\&.cnf\fP"
-default configuration file
-.PP
-.SH "SEE ALSO"
-.PP
-\fBfmtutil\fP(1), \fBfmtutil\&.cnf\fP(5)
-.PP
-Web page: <http://tug\&.org/teTeX/>
-.PP
-.SH "BUGS"
-.PP
-None known, but report any bugs found to <tex-k@tug\&.org> (mailing list)\&.
-.PP
-.SH "AUTHOR"
-.PP
-\fBtexlinks\fP was written by Thomas Esser
-<te@dbs\&.uni-hannover\&.de> in 1999\&.
-\fBtexlinks\fP has been released into the public domain\&.
-.PP
-This manual page was written by C\&.M\&. Connelly
-<c@eskimo\&.com>, for
-the Debian GNU/Linux system\&. It may be used by other distributions
-without contacting the author\&. Any mistakes or omissions in the
-manual page are my fault; inquiries about or corrections to this
-manual page should be directed to me (and not to the primary author)\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/texlinks.sh b/Build/source/texk/texlive/linked_scripts/tetex/texlinks.sh
deleted file mode 100755
index c6fd2880aae..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/texlinks.sh
+++ /dev/null
@@ -1,335 +0,0 @@
-#!/bin/sh
-# $Id$
-
-# Thomas Esser, 1999, 2002, 2003. public domain.
-
-# texlinks: script to maintain symlinks from format to engine. Interprets
-# the lines given in fmtutil.cnf.
-
-# History:
-# (Further changes in ChangeLog.)
-# Tue Oct 9 14:23:01 BST 2007
-# Added unlink option (-u) to aid OpenBSD package uninstall
-# Edd Barrett <vext01@gmail.com>
-# Sun Aug 28 21:41:06 CEST 2005
-# remove special cases for csplain,cslatex,pdfcslatex,pdfcsplain
-# Fr Apr 8 19:15:05 CEST 2005
-# cleanup now has an argument for the return code
-# So Mar 27 18:52:06 CEST 2005
-# honor $TMPDIR, $TEMP and $TMP, not just $TMP
-# Mon May 10 20:52:48 CEST 2004
-# kpseaccess instead of access
-# Thu Dec 25 22:11:53 CET 2003, te:
-# add version string
-# Tue Apr 9 22:46:34 CEST 2002, te:
-# do not create symlinks for cont-??, metafun and mptopdf
-
-test -f /bin/sh5 && test -z "$RUNNING_SH5" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_SH5=true; export RUNNING_SH5; exec /bin/sh5 $0 ${1+"$@"}; }
-unset RUNNING_SH5
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-version='$Id$'
-progname=texlinks
-cnf=fmtutil.cnf # name of the config file
-
-usage='Usage: texlinks [OPTION]... [DIRECTORY]...
-
-Create symbolic links format -> engine according to fmtutil setup.
-
-Mandatory arguments to long options are mandatory for short options too.
- -e, --exeext EXT append EXT to symlink targets (default: none)
- -f, --cnffile FILE use FILE as config file (default: fmtutil.cnf)
- -m, --multiplatform operate in all platform specific directories
- (default: operate only in directory for this platform)
- -q, --quiet silently skip existing scripts / binaries
- (default: issue warning)
- -s, --silent same as -q
- -u, --unlink remove symlinks created by texlinks
- -v, --verbose enable verbose messages (default: off)
- -h, --help show this help text
- --version show version string
-
-The DIRECTORY arguments are an optional list of directories in which to
-operate. If no directories are specified and --multiplatform is
-likewise not specified, the directory of this script itself is used.
-With --multiplatform, all child dirs of an upper-level bin/ dir are used.
-
-Report bugs to: tex-k@tug.org
-TeX Live home page: <http://tug.org/texlive/>
-'
-
-###############################################################################
-# abort(errmsg)
-# print `errmsg' to stderr and exit with error code 1
-###############################################################################
-abort() { errmsg "texlinks: $1."; cleanup 1; }
-
-# error message to stderr:
-errmsg() { echo "$@" >&2; }
-
-# give message to stderr only if "verbose" mode is on:
-verbose_echo() { $verbose && errmsg "$@"; }
-
-# in verbose mode: show command that is executed:
-verbose_do() { verbose_echo "$@"; "$@"; }
-
-###############################################################################
-# cleanup()
-# clean up the temp area and exit with proper exit status
-###############################################################################
-cleanup()
-{
- rc=$1
- $needsCleanup && test -n "$tmpdir" && test -d "$tmpdir" \
- && { rm -f "$tmpdir"/*; cd /; rmdir "$tmpdir"; }
- exit $rc
-}
-
-###############################################################################
-# setupTmpDir()
-# set up a temp directory and a trap to remove it
-###############################################################################
-setupTmpDir()
-{
- $needsCleanup && return
-
- trap 'cleanup 1' 1 2 3 7 13 15
- needsCleanup=true
- (umask 077; mkdir "$tmpdir") \
- || abort "could not create directory \`$tmpdir'"
-}
-
-
-# search a binary along $PATH:
-check_for_binary()
-{
- testbin=$1
- set x `echo "$PATH" | sed 's/^:/.:/; s/:$/:./; s/::/:.:/g; s/:/ /g'`; shift
- for i
- do
- if [ -x "$i/$testbin" ]; then
- echo "$i/$testbin"
- return 0
- fi
- done
- return 1
-}
-
-
-###############################################################################
-# install_link(dest src)
-# create a symlink like ln -s dest src, but make sure that src is not
-# an existing binary, possibly adding the executable extension if
-# passed on the command.
-###############################################################################
-install_link()
-{
- # make symlink src -> dest
- dest=$1; src=$2
-
- case $src in
- */mf)
- if test "$dest" = mf-nowin; then
- if test -f $selfautoloc/mfw; then
- dest=mfw # name for windows-enabled mf, once upon a time
- verbose_echo "both mfw and mf-nowin exists, $src linked to $dest"
- fi
- if test -f $selfautoloc/mf && test -f $selfautoloc/mf-nowin; then
- # have both mf and mf-nowin binaries. no link.
- verbose_echo "skipped metafont symlink $src -> $dest (special case)"
- return
- fi
- fi
- ;;
- esac
-
- # append .exe if supplied (for cygwin).
- test -n "$exeext" && dest="$dest$exeext"
-
- case $src in
- */cont-??|*/mptopdf)
- # context includes wrapper scripts that create/run these.
- verbose_echo "skipped ConTeXtish symlink $src -> $dest (special case)"
- ;;
- *)
- test "x$src" != "x`(ls -ld $src | awk '{print $NF}') 2>/dev/null`" &&
- rm -f "$src"
-
- if test -f "$src"; then
- case $silent in
- true)
- ;;
- *)
- errmsg "install_link $src -> $dest failed: file already exists."
- ;;
- esac
- else
- verbose_do ln -s "$dest" "$src"
- fi
- ;;
- esac
-}
-
-###############################################################################
-# search_symlinkdir()
-# look if $PATH has only symlinks to the real binaries and find that
-# directory. Also check if this directory is writable.
-###############################################################################
-search_symlinkdir()
-{
- kpsewhich=`check_for_binary kpsewhich`
- test -z "$kpsewhich" && return 1
- symlinkdir=`echo $kpsewhich | sed 's@/*kpsewhich$@@'`
- kpseaccess -w "$symlinkdir" || return 1
- touch "$symlinkdir/tl$$"
- if test -f "$selfautoloc/tl$$"; then
- rm -f "$symlinkdir/tl$$"
- return 1
- else
- rm -f "$symlinkdir/tl$$"
- return 0
- fi
-}
-
-###############################################################################
-# upd_symlinkdir()
-# if $PATH has only symlinks to the real binaries, update that directory
-# that holds the symlinks
-###############################################################################
-upd_symlinkdir()
-{
- search_symlinkdir || return 0
- for i in `sed 's@ .*@@' cnf_file_ln.$$`; do
- install_link "$selfautoloc/$i" "$symlinkdir/$i"
- done
-}
-
-###############################################################################
-# rm_link()
-# Delete a previously installed link
-###############################################################################
-rm_link()
-{
- link=$1;
- if test -e $link; then
- if test -h $link; then
- verbose_do rm -Rf $link
- else
- verbose_echo "kept $link, since not a symlink"
- fi
- else
- verbose_echo "skipped $link, non-existent"
- fi
-}
-
-###############################################################################
-# main()
-# parse commandline arguments, initialize variables,
-# switch into temp. direcrory, execute desired command
-###############################################################################
-main()
-{
- cnf_file= # global variable: full name of the config file
- dirs=
- needsCleanup=false
-
- exeext=
- multiplatform=false
- verbose=false
- unlink=false
- silent=false
- thisdir=`pwd`
- : ${KPSE_DOT=$thisdir}; export KPSE_DOT
- selfautoloc=`kpsewhich --expand-var='$SELFAUTOLOC'`
- while
- case $1 in
- --h*|-h)
- echo "$usage"; exit 0;;
- --version)
- echo "$progname version $version"; exit 0;;
- --cnffile|-f)
- shift; cnf_file=$1;;
- --e*|-e) shift; exeext=$1;;
- --m*|-m) multiplatform=true;;
- --s*|-s|--q*|-q) silent=true;;
- --u*|-u) unlink=true;;
- --v*|-v) verbose=true;;
- -*) errmsg "fmtutil: unknown option \`$1' ignored.";;
- *) break;;
- esac
- do test $# -gt 0 && shift; done
- dirs="$*"
-
- # if no cnf_file from command-line, look it up with kpsewhich:
- test -z "$cnf_file" && cnf_file=`kpsewhich --format='web2c files' $cnf`
- test -f "$cnf_file" || abort "config file \`$cnf' not found"
-
-
- tmpdir=${TMPDIR-${TEMP-${TMP-/tmp}}}/texlinks.$$
- setupTmpDir
- cd "$tmpdir" || cleanup 1
-
- sed '/^[ ]*#/d; /^[ ]*$/d' $cnf_file \
- | awk '{print $1, $2}' > cnf_file_ln.$$
-
- if test -z "$dirs"; then
- if test $multiplatform = true; then
- case $selfautoloc in
- */bin) dirs=$selfautoloc;;
- *) parent=`kpsewhich --expand-var='$SELFAUTODIR'`
- dirs=`find $parent -type f -name kpsewhich -print \
- | sed 's@/kpsewhich$@@'`;;
- esac
- else
- dirs=$selfautoloc
- fi
- fi
-
- for d in $dirs; do
- kpseaccess -w $d \
- || { errmsg "$d: no write permissions. Skipping..."; continue; }
- # cnf_file_ln.$$ has lines with "format engine" pairs
- set x `cat cnf_file_ln.$$`; shift
- while test $# != 0; do
- fmt=$1; engine=$2; shift; shift
-
- # Some broken shells destroy the positional arguments when calling a
- # shellfunction. Therefore, we save and restore them "by hand" in the
- # main_args_while variable.
- main_args_while="$@"
-
- test "x$fmt" = "x$engine" && continue
- if test -f "$d/$engine$exeext"; then
- case $unlink in
- true)
- rm_link "$d/$fmt";;
- *)
- install_link "$engine" "$d/$fmt";;
- esac
- else
- verbose_echo "skipped $d/$engine, engine does not exist"
- fi
-
- # restore positional arguments:
- set x $main_args_while; shift
-
- done
- done
- upd_symlinkdir
-}
-
-main ${1+"$@"}
-
-# set successful return code
-cleanup 0
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/updmap-sys.sh b/Build/source/texk/texlive/linked_scripts/tetex/updmap-sys.sh
deleted file mode 100755
index 6f3c8365658..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/updmap-sys.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-
-# updmap-sys: Thomas Esser, public domain.
-
-# wrapper script for updmap with TEXMFVAR and TEXMFCONFIG set to
-# TEXMFSYSVAR / TEXMFSYSCONFIG
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-test -f /bin/bsh && test -z "$RUNNING_BSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xAIX; } 2>/dev/null \
- && { RUNNING_BSH=true; export RUNNING_BSH; exec /bin/bsh $0 ${1+"$@"}; }
-unset RUNNING_BSH
-
-export PATH
-
-# hack around a bug in zsh:
-test -n "${ZSH_VERSION+set}" && alias -g '${1+"$@"}'='"$@"'
-
-v=`kpsewhich -var-value TEXMFSYSVAR`
-c=`kpsewhich -var-value TEXMFSYSCONFIG`
-
-TEXMFVAR="$v"
-TEXMFCONFIG="$c"
-export TEXMFVAR TEXMFCONFIG
-
-exec updmap ${1+"$@"}
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/updmap.1 b/Build/source/texk/texlive/linked_scripts/tetex/updmap.1
deleted file mode 100644
index 5bc81acc69d..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/updmap.1
+++ /dev/null
@@ -1,360 +0,0 @@
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.40.9.
-.TH UPDMAP "1" "August 2012" "TeX Live" "User Commands"
-.SH NAME
-updmap \- manage TeX font maps, per-user
-.br
-updmap-sys \- manage TeX font maps, system-wide
-.SH SYNOPSIS
-.B updmap
-[\fIOPTION\fR] ... [\fICOMMAND\fR]
-.br
-.B updmap-sys
-[\fIOPTION\fR] ... [\fICOMMAND\fR]
-.SH DESCRIPTION
-updmap (TeX Live, multi) version $Id: updmap.pl 27264 2012\-07\-31 05:10:29Z preining $
-.PP
-Update the default font map files used by pdftex, dvips, and dvipdfm(x),
-and optionally pxdvi, as determined by all configuration files updmap.cfg
-(the ones returned by running "kpsewhich \fB\-\-all\fR updmap.cfg", but see below).
-.PP
-Among other things, these map files are used to determine which fonts
-should be used as bitmaps and which as outlines, and to determine which
-font files are included in the PDF or PostScript output.
-.PP
-By default, the TeX filename database (ls\-R) is also updated.
-.SH OPTIONS
-.TP
-\fB\-\-cnffile\fR FILE
-read FILE for the updmap configuration
-(can be given multiple times, in which case
-all the files are used)
-.TP
-\fB\-\-dvipdfmxoutputdir\fR DIR
-specify output directory (dvipdfm(x) syntax)
-.TP
-\fB\-\-dvipsoutputdir\fR DIR
-specify output directory (dvips syntax)
-.TP
-\fB\-\-pdftexoutputdir\fR DIR
-specify output directory (pdftex syntax)
-.TP
-\fB\-\-pxdvioutputdir\fR DIR
-specify output directory (pxdvi syntax)
-.TP
-\fB\-\-outputdir\fR DIR
-specify output directory (for all files)
-.TP
-\fB\-\-copy\fR
-cp generic files rather than using symlinks
-.TP
-\fB\-\-force\fR
-recreate files even if config hasn't changed
-.TP
-\fB\-\-nomkmap\fR
-do not recreate map files
-.TP
-\fB\-\-nohash\fR
-do not run texhash
-.TP
-\fB\-n\fR, \fB\-\-dry\-run\fR
-only show the configuration, no output
-.TP
-\fB\-\-quiet\fR, \fB\-\-silent\fR
-reduce verbosity
-.SS "Commands:"
-.TP
-\fB\-\-help\fR
-show this message and exit
-.TP
-\fB\-\-version\fR
-show version information and exit
-.TP
-\fB\-\-showoption\fR OPTION
-show the current setting of OPTION
-.TP
-\fB\-\-showoptions\fR OPTION
-show possible settings for OPTION
-.TP
-\fB\-\-setoption\fR OPTION VALUE
-set OPTION to value; option names below
-.TP
-\fB\-\-setoption\fR OPTION=VALUE
-as above, just different syntax
-.TP
-\fB\-\-enable\fR MAPTYPE MAPFILE
-add "MAPTYPE MAPFILE" to updmap.cfg,
-where MAPTYPE is Map, MixedMap, or KanjiMap
-.TP
-\fB\-\-enable\fR Map=MAPFILE
-add "Map MAPFILE" to updmap.cfg
-.HP
-\fB\-\-enable\fR MixedMap=MAPFILE add "MixedMap MAPFILE" to updmap.cfg
-.HP
-\fB\-\-enable\fR KanjiMap=MAPFILE add "KanjiMap MAPFILE" to updmap.cfg
-.TP
-\fB\-\-disable\fR MAPFILE
-disable MAPFILE, of whatever type
-.TP
-\fB\-\-listmaps\fR
-list all active and inactive maps
-.TP
-\fB\-\-listavailablemaps\fR
-same as \fB\-\-listmaps\fR, but without
-unavailable map files
-.TP
-\fB\-\-syncwithtrees\fR
-disable unavailable map files in updmap.cfg
-.PP
-Explanation of the map types: the (only) difference between Map and
-MixedMap is that MixedMap entries are not added to psfonts_pk.map.
-The purpose is to help users with devices that render Type 1 outline
-fonts worse than mode\-tuned Type 1 bitmap fonts. So, MixedMap is used
-for fonts that are available as both Type 1 and Metafont.
-KanjiMap entries are added to psfonts_t1.map and kanjix.map.
-.PP
-Explanation of the OPTION names for \fB\-\-showoptions\fR, \fB\-\-showoption\fR, \fB\-\-setoption\fR:
-.TP
-dvipsPreferOutline
-true|false (default true)
-.IP
-Whether dvips uses bitmaps or outlines, when both are available.
-.TP
-dvipsDownloadBase35
-true|false (default true)
-.IP
-Whether dvips includes the standard 35 PostScript fonts in its output.
-.TP
-pdftexDownloadBase14
-true|false (default true)
-.IP
-Whether pdftex includes the standard 14 PDF fonts in its output.
-.TP
-pxdviUse
-true|false (default false)
-.IP
-Whether maps for pxdvi (Japanese\-patched xdvi) are under updmap's control.
-.TP
-kanjiEmbed
-(any string)
-.TP
-kanjiVariant
-(any string)
-.IP
-See below.
-.TP
-LW35
-URWkb|URW|ADOBEkb|ADOBE (default URWkb)
-.IP
-Adapt the font and file names of the standard 35 PostScript fonts.
-URWkb URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb)
-URW URW fonts with "vendor" filenames (e.g. n019064l.pfb)
-ADOBEkb Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb)
-ADOBE Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb)
-.IP
-These options are only read and acted on by updmap; dvips, pdftex, etc.,
-do not know anything about them. They work by changing the default map
-file which the programs read, so they can be overridden by specifying
-command\-line options or configuration files to the programs, as
-explained at the beginning of updmap.cfg.
-.IP
-The options kanjiEmbed and kanjiVariant specify special replacements
-in the map lines. If a map contains the string @kanjiEmbed@, then
-this will be replaced by the value of that option; similarly for
-kanjiVariant. In this way, users of Japanese TeX can select different
-fonts to be included in the final output.
-.SH ENVIRONMENT
-.PP
-Explanation of trees and files normally used:
-.IP
-If \fB\-\-cnffile\fR is specified on the command line (possibly multiple
-times), its value(s) are used. Otherwise, updmap reads all the
-updmap.cfg files found by running `kpsewhich \fB\-all\fR updmap.cfg', in the
-order returned by kpsewhich, with one exception: an updmap.cfg found
-in TEXMFLOCAL is given higher priority than the updmap.cfg in
-TEXMFMAIN, to ensure that local adjustments by administrators take
-precedence over what is shipped in TeX Live.
-.IP
-In any case, if multiple updmap.cfg files are found, all the maps
-mentioned in all the updmap.cfg files are merged.
-.IP
-Thus, if updmap.cfg files are present in all trees, and the default
-layout is used as shipped with TeX Live, the following files are
-read, in the given order.
-.nf
-.IP
-For updmap\-sys:
-TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf\-config/web2c/updmap.cfg
-TEXMFSYSVAR $TEXLIVE/YYYY/texmf\-var/web2c/updmap.cfg
-TEXMFLOCAL $TEXLIVE/texmf\-local/web2c/updmap.cfg
-TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg
-TEXMFDIST $TEXLIVE/YYYY/texmf\-dist/web2c/updmap.cfg
-.IP
-For updmap:
-TEXMFCONFIG $HOME/.texliveYYYY/texmf\-config/web2c/updmap.cfg
-TEXMFVAR $HOME/.texliveYYYY/texmf\-var/web2c/updmap.cfg
-TEXMFHOME $HOME/texmf/web2c/updmap.cfg
-TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf\-config/web2c/updmap.cfg
-TEXMFSYSVAR $TEXLIVE/YYYY/texmf\-var/web2c/updmap.cfg
-TEXMFLOCAL $TEXLIVE/texmf\-local/web2c/updmap.cfg
-TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg
-TEXMFDIST $TEXLIVE/YYYY/texmf\-dist/web2c/updmap.cfg
-.IP
-(where YYYY is the TeX Live release version).
-.fi
-.IP
-There is another exception to keep upgradability from earlier versions
-of TeX Live: if a file TEXMFLOCAL/web2c/updmap\-local.cfg exists
-(formerly used by tlmgr to merge local fonts), then the file
-TEXMFLOCAL/web2c/updmap.cfg is ignored (if it exists) and that
-updmap\-local.cfg is used instead. In this case, updmap recognizes the
-previous syntax for disabling map files in updmap\-local.cfg (this
-syntax is different from what is used now).
-.IP
-According to the actions, updmap might write to one of the given files
-or create a new updmap.cfg, described further below.
-.IP
-Where changes are saved: if config files are given on the command
-line, then the first one given will be used to save any changes from
-\fB\-\-setoption\fR, \fB\-\-enable\fR or \fB\-\-disable\fR. If the config files are taken
-from kpsewhich output, then the algorithm is more complex:
-.IP
-1) If $TEXMFCONFIG/web2c/updmap.cfg or $TEXMFHOME/web2c/updmap.cfg
-appears in the list of used files, then the one listed first by
-kpsewhich \fB\-\-all\fR (equivalently, the one returned by kpsewhich
-updmap.cfg), is used.
-.IP
-2) If neither of the above two are present and changes are made, a
-new config file is created in $TEXMFCONFIG/web2c/updmap.cfg.
-.IP
-Resolving multiple definitions of a font:
-.IP
-If a font is defined in more than one map file, then the definition
-coming from the first\-listed updmap.cfg is used. If a font is
-defined multiple times within the same map file, one is chosen
-arbitrarily. In both cases a warning is issued.
-.IP
-Disabling maps:
-.IP
-updmap.cfg files with higher priority (listed earlier) can disable
-maps mentioned in lower priority (listed later) updmap.cfg files by
-writing, e.g.,
-.IP
-#! Map mapname.map
-.IP
-or
-.IP
-#! MixedMap mapname.map
-.IP
-in the higher\-priority updmap.cfg file.
-.IP
-As an example, suppose you have a copy of MathTime Pro fonts
-and want to disable the Belleek version of the fonts; that is,
-disable the map belleek.map. You can create the file
-$TEXMFCONFIG/web2c/updmap.cfg with the content
-.IP
-#! Map belleek.map
-Map mt\-plus.map
-Map mt\-yy.map
-.IP
-and call updmap.
-.IP
-updmap writes the map files for dvips (psfonts.map) and pdftex
-(pdftex.map) to the TEXMFVAR/fonts/map/updmap/{dvips,pdftex}/
-directories.
-.IP
-The log file is written to TEXMFVAR/web2c/updmap.log.
-.IP
-When updmap\-sys is run, TEXMFSYSCONFIG and TEXMFSYSVAR are used
-instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the only
-difference between updmap\-sys and updmap.
-.IP
-Other locations may be used if you give them on the command line, or
-these trees don't exist, or you are not using the original TeX Live.
-.IP
-To see the precise locations of the various files that
-will be read and written, give the \fB\-n\fR option (or read the source).
-.SH EXAMPLES
-.PP
-For step\-by\-step instructions on making new fonts known to TeX, read
-http://tug.org/fonts/fontinstall.html. For even more terse
-instructions, read the beginning of updmap.cfg.
-.SH FILES
-Configuration and input files:
-.IP "\fIupdmap\&.cfg\fP"
-Main configuration file\&. In
-\fItexmf/web2c\fP by default, but may be located elsewhere
-depending on your distribution\&. Each texmf tree read should have its
-own \fIupdmap.cfg\fP.
-.IP "\fIdvips35\&.map\fP"
-Map file for standard 35 PostScript fonts for
-use with \fBdvips\fP(1)\&.
-.IP "\fIpdftex35\&.map\fP"
-Map file for standard 35 PostScript fonts for
-use with \fBpdftex\fP(1)\&.
-.IP "\fIps2pk35\&.map\fP"
-Map file for standard 35 PostScript fonts for
-use with \fBps2pk\fP(1)\&.
-.PP
-Output files:
-.IP "\fIpsfonts\&.map\fP"
-For \fBdvips\fP(1)\&.
-Same as \fIpsfonts_t1\&.map\fP if option \fBdvipsPreferOutline\fP active,
-else as \fIpsfonts_pk\&.map\fP.
-.IP "\fIpsfonts_pk\&.map\fP"
-For \fBdvips\fP(1)\&.
-Without information from MixedMap files\&.
-(Setting of \fBdvipsPreferOutline\fP ignored\&.)
-.IP "\fIpsfonts_t1\&.map\fP"
-For \fBdvips\fP(1)\&.
-With information from MixedMap files\&.
-(Setting of \fBdvipsPreferOutline\fP ignored\&.)
-.IP "\fIdownload35\&.map\fP"
-For \fBdvips\fP(1)\&.
-Always downloads the standard 35 fonts\&.
-(Setting of \fBdvipsDownloadBase35\fP ignored\&.)
-.IP "\fIbuiltin35\&.map\fP"
-For \fBdvips\fP(1)\&.
-Never downloads the standard 35 fonts\&.
-(Setting of \fBdvipsDownloadBase35\fP ignored\&.)
-.IP "\fIpdftex\&.map\fP"
-For \fBpdftex\fP(1)\&.
-Same as \fIpdftex_dl14\&.map\fP if option \fBpdftexDownloadBase14\fP active,
-else as \fIpdftex_ndl14\&.map\fP.
-.IP "\fIpdftex_dl14\&.map\fP"
-For \fBpdftex\fP(1)\&.
-Always downloads the standard 14 fonts\&.
-.IP "\fIpdftex_ndl14\&.map\fP"
-For \fBpdftex\fP(1)\&.
-Never downloads the standard 14 fonts\&.
-.IP "\fIps2pk\&.map\fP"
-Similar to \fIpsfonts.map\fP file, but
-forces all fonts to be downloaded, so this map file can be used with
-\fBxdvi\fP(1) and \fBps2pk\fP(1)\&.
-.PP
-Configuration files for \fBdvips\fP(1):
-.IP "\fIconfig\&.builtin35\fP"
-Loads \fIbuiltin35\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.download35\fP"
-Loads \fIdownload35\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.outline\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.pdf\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP and has additional optimizations for PDF generation\&.
-.IP "\fIconfig\&.pk\fP"
-Loads \fIpsfonts_pk\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.www\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-(For compatibility with old versions\&.)
-.IP "\fIconfig\&.gstopk\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.SH "REPORTING BUGS"
-Report bugs to: tex\-k@tug.org
-.br
-TeX Live home page: <http://tug.org/texlive/>
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/updmap.cfg.5 b/Build/source/texk/texlive/linked_scripts/tetex/updmap.cfg.5
deleted file mode 100644
index 43a7cc2d23f..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/updmap.cfg.5
+++ /dev/null
@@ -1,155 +0,0 @@
-.\" Hey, Emacs! This is an -*- nroff -*- source file.
-.\"
-.\" Copyright (C) 2004, 2012 Hilmar Preusse <hille42@web.de>
-.\" Copyright (C) 2012 Norbert Preining <preining@logic.at>
-.\"
-.\" This is free software; you can redistribute it and/or modify it under
-.\" the terms of the GNU General Public License as published by the Free
-.\" Software Foundation; either version 2, or (at your option) any later
-.\" version.
-.\"
-.\" This is distributed in the hope that it will be useful, but WITHOUT
-.\" ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-.\" FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-.\" for more details.
-.\"
-.\" You should have received a copy of the GNU General Public License
-.\" along with this program. if not, see <http://www.gnu.org/licenses/>.
-.\"
-.TH "UPDMAP.CFG" "20" "November 2012" "TeX Live" "TeX Live"
-.SH "NAME"
-\fBupdmap.cfg\fR \- configuration of font mapping/inclusion for dvips and
-friends.
-.SH "DESCRIPTION"
-The file \fBupdmap.cfg\fR is the central font configuration file of a
-teTeX system and is read by \fBupdmap\fP(1). It describes if and how
-fonts should be included (or not included) into PS-/PDF-files. This
-works for Outline (Postscript Type1) and Bitmap Fonts (Postscript
-Type3) mostly coming from MetaFont.
-.PP
-\fBupdmap\fP is a utility that creates font configuration files for
-\fBdvips\fP(1), \fBpdftex\fP(1), \fBxdvi\fP(1), \fBps2pk\fP(1),
-\fBgsftopk\fP(1), and \fBdvipdfmx\fP(1)\&. In
-an ideal world, updmap would be unnecessary -- each of these programs
-would read the same configuration file to learn what fonts are
-available and how they should be treated\&. As things stand, however,
-each of these tools has subtly different requirements and thereby
-needs its own font configuration file\&. \fBupdmap\fP creates font
-configuration files for all of these programs from several sources,
-namely all \fBupdmap.cfg\fR, allowing you to easily keep all the different
-configuration files in sync\&.
-.P
-Running "updmap --help" will output the main documentation for using
-\fBupdmap\fR.
-.P
-\fBdvipsPreferOutline\fR
-.br
-Configures if \fBdvips\fR (by default) should prefer bitmap fonts or outline fonts
-if both are available? Independent of this setting, outlines can be forced
-by putting "p psfonts_t1.map" into a config file that dvips reads. Bitmaps
-can be forced by putting "p psfonts_pk.map" into a config file. We provide
-such config files which can be enabled via
-\fBdvips\fR \fI-Poutline\fR (resp. \fBdvips\fR \fI-Ppk\fR).
-.br
-Valid settings for dvipsPreferOutline are \fItrue\fR / \fIfalse\fR.
-.P
-\fBLW35\fR
-.br
-Which fonts of the "Basic 35 Laserwriter Fonts" do you want to use and
-how are the filenames chosen? Valid settings:
-.br
-URW: URW fonts with "vendor" filenames (e.g. n019064l.pfb)
-.br
-URWkb: URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb)
-.br
-ADOBE: Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb)
-.br
-ADOBEkb: Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb)
-.P
-\fBdvipsDownloadBase35\fR
-.br
-Configures if \fBdvips\fR (by default) should download the 35 base
-PostScript fonts into the document (set \fItrue\fR) or should these
-fonts be used from the ps interpreter / printer (set \fIfalse\fR).
-.br
-The user can override the default by specifying \fBdvips\fR \fI-Pdownload35\fR
-(resp. \fBdvips\fR \fI-Pbuiltin35\fR) to download the LW35 fonts
-(resp. use the built-in fonts).
-.br
-Valid settings are \fItrue\fR / \fIfalse\fR.
-.P
-\fBpdftexDownloadBase14\fR
-.br
-Should \fBpdftex\fR download the 14 base PDF fonts? Since some configurations
-(ps / pdf tools / printers) use bad default fonts, it is safer to download
-the fonts. The pdf files get bigger, but that is the cost.
-.br
-Valid settings are \fItrue\fR (download the fonts) or \fIfalse\fR (don't
-download the fonts). Adobe recommends embedding all fonts.
-.P
-\fBpxdviUse\fR
-.br
-Should special map files for pxdvi be created? pxdvi is an adaption of xdvi
-with support for reading and displaying files generated by the ptex family
-of engines.
-.br
-Valid settings are \fItrue\fR (generate configuration) or \fIfalse\fR. See
-http://www.tug.org/texlive/updmap-kanji.html for detailed discussion.
-.P
-\fBkanjiEmbed\fR
-.br
-\fBkanjiVariant\fR
-.br
-The options \fBkanjiEmbed\fR and \fBkanjiVariant\fR specify special
-replacements in the map lines. In a map, the string "@kanjiEmbed@"
-will be replaced by the value of that option; similarly for
-\fBkanjiVariant\fR. In this way, users of Japanese TeX can select
-different fonts to be included in the final output.
-.P
-\fBMap\fR
-.br
-Points to a map file, which describes a mapping from a font (called in the TeX
-document) to the pfb file containing the Postscript code.
-.br
-Usage: \fBMap\fR filename.map
-.P
-The syntax of map files is the same as \fBdvips\fP(1) uses, see the
-section "psfonts.map" in the manual of \fBdvips\fP(1).
-.P
-\fBMixedMap\fR
-.br
-Similar to \fBMap\fR. It should be used when there is Type1 and a bitmap
-implementation of the font (the latter mostly coming from MetaFont). These
-entries will not be used in the default map of \fBdvips\fR if
-\fBdvipsPreferOutline\fR is set to \fIfalse\fR.
-.br
-Usage: \fBMixedMap\fR filename.map
-.P
-\fBKanjiMap\fR
-.br
-Similar to \fBMap\fR. This should be used for kanji fonts.
-.br
-Usage: \fBKanjiMap\fR filename.map
-.P
-The sign \fB#\fR precedes a comment.
-.P
-Map files not to be used should be commented out using the string
-\fB#!\fR at the beginning of the line. Such entries can be
-(de-)activated using \fBupdmap\fR with the options \fI--enable\fR and
-\fI--disable\fR, respectively.
-
-.SH "AUTHOR"
-This manual page was written by Hilmar Preusse <hille42@web.de> and
-extended by Norbert Preining <preining@logic.at>, for
-the Debian GNU/Linux system by simply copying the comments from
-\fBupdmap.cfg\fR and rewriting some of them. It may be used by other
-distributions without contacting the author. Any mistakes or omissions in
-the manual page are our fault; inquiries about or corrections to this manual
-page should be directed to tex-live@tug.org.
-
-.SH "SEE ALSO"
-updmap(1), dvips(1)
-
-.SH "THANKS TO"
-Frank Kuester,
-Thomas Esser.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/updmap.help2man b/Build/source/texk/texlive/linked_scripts/tetex/updmap.help2man
deleted file mode 100644
index 4864c2d74f4..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/updmap.help2man
+++ /dev/null
@@ -1,100 +0,0 @@
-# $Id$
-# This help2man auxiliary file is in the public domain.
-# Originally created by Karl Berry.
-# The FILES text from Claire Connelly.
-# See the Makefile for the help2man invocation.
-# do not fill the long TEXMF* tables.
-
-[NAME]
-updmap \- manage TeX font maps, per-user
-.br
-updmap-sys \- manage TeX font maps, system-wide
-
-/in the final output/
-.SH ENVIRONMENT
-
-/in the given order/
-.nf
-
-/where YYYY is/
-.fi
-
-/give the -n option/
-.SH EXAMPLES
-
-[FILES]
-Configuration and input files:
-.IP "\fIupdmap\&.cfg\fP"
-Main configuration file\&. In
-\fItexmf/web2c\fP by default, but may be located elsewhere
-depending on your distribution\&. Each texmf tree read should have its
-own \fIupdmap.cfg\fP.
-.IP "\fIdvips35\&.map\fP"
-Map file for standard 35 PostScript fonts for
-use with \fBdvips\fP(1)\&.
-.IP "\fIpdftex35\&.map\fP"
-Map file for standard 35 PostScript fonts for
-use with \fBpdftex\fP(1)\&.
-.IP "\fIps2pk35\&.map\fP"
-Map file for standard 35 PostScript fonts for
-use with \fBps2pk\fP(1)\&.
-.PP
-Output files:
-.IP "\fIpsfonts\&.map\fP"
-For \fBdvips\fP(1)\&.
-Same as \fIpsfonts_t1\&.map\fP if option \fBdvipsPreferOutline\fP active,
-else as \fIpsfonts_pk\&.map\fP.
-.IP "\fIpsfonts_pk\&.map\fP"
-For \fBdvips\fP(1)\&.
-Without information from MixedMap files\&.
-(Setting of \fBdvipsPreferOutline\fP ignored\&.)
-.IP "\fIpsfonts_t1\&.map\fP"
-For \fBdvips\fP(1)\&.
-With information from MixedMap files\&.
-(Setting of \fBdvipsPreferOutline\fP ignored\&.)
-.IP "\fIdownload35\&.map\fP"
-For \fBdvips\fP(1)\&.
-Always downloads the standard 35 fonts\&.
-(Setting of \fBdvipsDownloadBase35\fP ignored\&.)
-.IP "\fIbuiltin35\&.map\fP"
-For \fBdvips\fP(1)\&.
-Never downloads the standard 35 fonts\&.
-(Setting of \fBdvipsDownloadBase35\fP ignored\&.)
-.IP "\fIpdftex\&.map\fP"
-For \fBpdftex\fP(1)\&.
-Same as \fIpdftex_dl14\&.map\fP if option \fBpdftexDownloadBase14\fP active,
-else as \fIpdftex_ndl14\&.map\fP.
-.IP "\fIpdftex_dl14\&.map\fP"
-For \fBpdftex\fP(1)\&.
-Always downloads the standard 14 fonts\&.
-.IP "\fIpdftex_ndl14\&.map\fP"
-For \fBpdftex\fP(1)\&.
-Never downloads the standard 14 fonts\&.
-.IP "\fIps2pk\&.map\fP"
-Similar to \fIpsfonts.map\fP file, but
-forces all fonts to be downloaded, so this map file can be used with
-\fBxdvi\fP(1) and \fBps2pk\fP(1)\&.
-.PP
-Configuration files for \fBdvips\fP(1):
-.IP "\fIconfig\&.builtin35\fP"
-Loads \fIbuiltin35\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.download35\fP"
-Loads \fIdownload35\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.outline\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.pdf\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP and has additional optimizations for PDF generation\&.
-.IP "\fIconfig\&.pk\fP"
-Loads \fIpsfonts_pk\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-.IP "\fIconfig\&.www\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
-(For compatibility with old versions\&.)
-.IP "\fIconfig\&.gstopk\fP"
-Loads \fIpsfonts_t1\&.map\fP instead
-of \fIpsfonts\&.map\fP\&.
diff --git a/Build/source/texk/texlive/linked_scripts/tetex/updmap.pl b/Build/source/texk/texlive/linked_scripts/tetex/updmap.pl
deleted file mode 100755
index d265ebd1fb5..00000000000
--- a/Build/source/texk/texlive/linked_scripts/tetex/updmap.pl
+++ /dev/null
@@ -1,2306 +0,0 @@
-#!/usr/bin/env perl
-# mupdmap: utility to maintain map files for outline fonts.
-# $Id$
-#
-# Copyright 2011, 2012 Norbert Preining
-# This file is licensed under the GNU General Public License version 2
-# or any later version.
-#
-# History:
-# Original shell script (C) 2002 Thomas Esser
-# first perl variant (C) Fabrice Popineau
-# later adaptions by Reinhard Kotucha and Karl Berry
-# the original versions were licensed under the following agreement:
-# Anyone may freely use, modify, and/or distribute this file, without
-# limitation.
-#
-# TODO
-# - check all other invocations
-# - after TL2012? Maybe remove support for reading updmap-local.cfg
-#
-
-my $TEXMFROOT;
-
-BEGIN {
- $^W=1;
- $TEXMFROOT = `kpsewhich -var-value=TEXMFROOT`;
- if ($?) {
- print STDERR "updmap: Cannot find TEXMFROOT, aborting!\n";
- exit 1;
- }
- chomp($TEXMFROOT);
- unshift (@INC, "$TEXMFROOT/tlpkg");
-}
-
-
-my $version = '$Id$';
-
-use Getopt::Long qw(:config no_autoabbrev ignore_case_always);
-use strict;
-use TeXLive::TLUtils qw(mkdirhier mktexupd win32 basename dirname
- sort_uniq member);
-
-#use Data::Dumper;
-#$Data::Dumper::Indent = 1;
-
-(my $prg = basename($0)) =~ s/\.pl$//;
-
-# sudo sometimes does not reset the home dir of root, check on that
-# see more comments at the definition of the function itself
-# this function checks by itself whether it is running on windows or not
-reset_root_home();
-
-chomp(my $TEXMFMAIN = `kpsewhich --var-value=TEXMFMAIN`);
-chomp(my $TEXMFVAR = `kpsewhich -var-value=TEXMFVAR`);
-chomp(my $TEXMFCONFIG = `kpsewhich -var-value=TEXMFCONFIG`);
-chomp(my $TEXMFHOME = `kpsewhich -var-value=TEXMFHOME`);
-
-# make sure that on windows *everything* is in lower case for comparison
-if (win32()) {
- $TEXMFMAIN = lc($TEXMFMAIN);
- $TEXMFVAR = lc($TEXMFVAR);
- $TEXMFCONFIG = lc($TEXMFCONFIG);
- $TEXMFROOT = lc($TEXMFROOT);
- $TEXMFHOME = lc($TEXMFHOME);
-}
-
-
-my %opts = ( quiet => 0, nohash => 0, nomkmap => 0 );
-my $alldata;
-my $updLSR;
-
-my @cmdline_options = (
- "listfiles",
- "cnffile=s@",
- "copy",
- "disable=s@",
- "dvipdfmoutputdir=s",
- "dvipdfmxoutputdir=s",
- "dvipsoutputdir=s",
- # the following does not work, Getopt::Long looses the first
- # entry in a multi setting, treat it separately in processOptions
- # furthermore, it is not supported by older perls, so do it differently
- #"enable=s{1,2}",
- "edit",
- "force",
- "listavailablemaps",
- "listmaps|l",
- "nohash",
- "nomkmap",
- "dry-run|n",
- "outputdir=s",
- "pdftexoutputdir=s",
- "pxdvioutputdir=s",
- "quiet|silent|q",
- # the following is a correct specification of an option according
- # to the manual, but it does not work!
- # we will treat that option by itself in processOptions
- # furthermore, it is not supported by older perls, so do it differently
- #"setoption=s@{1,2}",
- "showoptions=s@",
- "showoption=s@",
- "syncwithtrees",
- "version",
- "help|h",
- # some debugging invocations
- "_readsave=s",
- );
-
-my %settings = (
- dvipsPreferOutline => {
- type => "binary",
- default => "true",
- },
- LW35 => {
- type => "string",
- possible => [ qw/URW URWkb ADOBE ADOBEkb/ ],
- default => "URWkb",
- },
- dvipsDownloadBase35 => {
- type => "binary",
- default => "true",
- },
- pdftexDownloadBase14 => {
- type => "binary",
- default => "true",
- },
- dvipdfmDownloadBase14 => {
- type => "binary",
- default => "true",
- },
- pxdviUse => {
- type => "binary",
- default => "false",
- },
- kanjiEmbed => {
- type => "any",
- default => "noEmbed",
- },
- kanjiVariant => {
- type => "any",
- default => "",
- },
-);
-
-&main();
-
-###############
-
-sub main {
- processOptions();
-
- help() if $opts{'help'};
-
- if ($opts{'version'}) {
- print version();
- exit (0);
- }
-
- if ($opts{'dvipdfmoutputdir'} && !defined($opts{'dvipdfmxoutputdir'})) {
- $opts{'dvipdfmxoutputdir'} = $opts{'dvipdfmoutputdir'};
- printf STDERR "Using --dvipdfmoutputdir options for dvipdfmx, but please use --dvipdfmxoutputdir\n";
- }
-
- if ($opts{'dvipdfmoutputdir'} && $opts{'dvipdfmxoutputdir'} &&
- $opts{'dvipdfmoutputdir'} ne $opts{'dvipdfmxoutputdir'}) {
- printf STDERR "Options for --dvipdfmoutputdir and --dvipdfmxoutputdir do not agree\nplease use only --dvipdfmxoutputdir. Exiting.\n";
- exit(1);
- }
-
- if ($opts{'_readsave'}) {
- read_updmap_files($opts{'_readsave'});
- merge_settings_replace_kanji();
- print "READING DONE ============================\n";
- #print Dumper($alldata);
- $alldata->{'updmap'}{$opts{'_readsave'}}{'changed'} = 1;
- save_updmap($opts{'_readsave'});
- exit 0;
- }
-
- if ($opts{'showoptions'}) {
- for my $o (@{$opts{'showoptions'}}) {
- if (defined($settings{$o})) {
- if ($settings{$o}{'type'} eq "binary") {
- print "true false\n";
- } elsif ($settings{$o}{'type'} eq "string") {
- print "@{$settings{$o}{'possible'}}\n";
- } elsif ($settings{$o}{'type'} eq "any") {
- print "(any string)\n";
- } else {
- print "strange: unknown type of option $o\nplease report\n";
- }
- } else {
- print "$prg: unknown option: $o\n";
- }
- }
- exit 0;
- }
-
- # config file for changes
- my $changes_config_file;
-
- # determine which config files should be used
- # replaces the former "setupCfgFile"
- #
- # we also determine here where changes will be saved to
- if ($opts{'cnffile'}) {
- my @tmp;
- for my $f (@{$opts{'cnffile'}}) {
- if (! -f $f) {
- die "$prg: Config file \"$f\" not found.";
- }
- push @tmp, (win32() ? lc($f) : $f);
- }
- @{$opts{'cnffile'}} = @tmp;
- # in case that config files are given on the command line, the first
- # in the list is the one where changes will be written to.
- ($changes_config_file) = @{$opts{'cnffile'}};
- } else {
- my @all_files = `kpsewhich -all updmap.cfg`;
- chomp(@all_files);
- my @used_files;
- for my $f (@all_files) {
- push @used_files, (win32() ? lc($f) : $f);
- }
- #
- my $TEXMFLOCALVAR;
- my @TEXMFLOCAL;
- if (win32()) {
- chomp($TEXMFLOCALVAR =`kpsewhich --expand-path=\$TEXMFLOCAL`);
- @TEXMFLOCAL = map { lc } split(/;/ , $TEXMFLOCALVAR);
- } else {
- chomp($TEXMFLOCALVAR =`kpsewhich --expand-path='\$TEXMFLOCAL'`);
- @TEXMFLOCAL = split /:/ , $TEXMFLOCALVAR;
- }
- #
- # search for TEXMFLOCAL/web2c/updmap.cfg
- # check for compatibility with old updmap-local.cfg
- my @tmlused;
- for my $tml (@TEXMFLOCAL) {
- my $TMLabs = Cwd::abs_path($tml);
- next if (!$TMLabs);
- my $oldfound = 0;
- if (-r "$TMLabs/web2c/updmap-local.cfg") {
- push @tmlused, "$TMLabs/web2c/updmap-local.cfg";
- warning("Old configuration file\n $TMLabs/web2c/updmap-local.cfg\nfound! ");
- $oldfound = 1;
- }
- if (-r "$TMLabs/web2c/updmap.cfg") {
- if ($oldfound) {
- warning("Will read it *instead* of\n $TMLabs/web2c/updmap.cfg\n");
- } else {
- push @tmlused, "$TMLabs/web2c/updmap.cfg";
- }
- }
- warning("Please consider moving the information from updmap-local.cfg to\n $TMLabs/web2c/updmap.cfg\n")
- if ($oldfound);
- }
- #
- # reorder used files: we move TEXMFLOCAL (if used) just above TEXMFMAIN
- # as sysadmins will probably adjust values there
- #
- # updmap (user):
- # ==============
- # as found:
- # TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg
- # TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg
- # TEXMFHOME $HOME/texmf/web2c/updmap.cfg
- # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg
- # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg
- # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg
- # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg
- # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg
- #
- # as used:
- # TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg
- # TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg
- # TEXMFHOME $HOME/texmf/web2c/updmap.cfg
- # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg
- # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg
- # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg
- # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg
- # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg
- #
- # updmap-sys (root):
- # ==================
- # as found:
- # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg
- # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg
- # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg
- # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg
- # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg
- #
- # as used:
- # TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg
- # TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg
- # TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg
- # TEXMFMAIN $TEXLIVE/YYYY/texmf/web2c/updmap.cfg
- # TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg
- #
- if (@tmlused) {
- my @tmp;
- for my $f (@used_files) {
- if ($f =~ m!\Q$TEXMFMAIN/\E!) {
- push @tmp, @tmlused;
- push @tmp, $f;
- } else {
- my $pushit = 1;
- for my $tml (@TEXMFLOCAL) {
- if ($f =~ m!\Q$tml\E!) {
- $pushit = 0;
- last;
- }
- }
- push @tmp, $f if ($pushit);
- }
- }
- @used_files = @tmp;
- }
- @{$opts{'cnffile'}} = @used_files;
- #
- # determine the config file that we will use for changes
- # if in the list of used files contains either one from
- # TEXMFHOME or TEXMFCONFIG (which is TEXMFSYSCONFIG in the -sys case)
- # then use the *top* file (which will be either one of the two),
- # if none of the two exists, create a file in TEXMFCONFIG and use it
- my $use_top = 0;
- for my $f (@used_files) {
- if ($f =~ m!(\Q$TEXMFHOME\E|\Q$TEXMFCONFIG\E)/web2c/updmap.cfg!) {
- $use_top = 1;
- last;
- }
- }
- if ($use_top) {
- ($changes_config_file) = @used_files;
- } else {
- # add the empty config file
- my $dn = "$TEXMFCONFIG/web2c";
- $changes_config_file = "$dn/updmap.cfg";
- }
- }
- if (!$opts{'quiet'}) {
- print "$prg is using the following updmap.cfg files (in precedence order):\n";
- for my $f (@{$opts{'cnffile'}}) {
- print " $f\n";
- }
- print "$prg is using the following updmap.cfg file for writing changes:\n";
- print " $changes_config_file\n";
- }
- if ($opts{'listfiles'}) {
- # we listed it above, so be done
- exit 0;
- }
-
- $alldata->{'changes_config'} = $changes_config_file;
-
- read_updmap_files(@{$opts{'cnffile'}});
-
- if ($opts{'showoption'}) {
- merge_settings_replace_kanji();
- for my $o (@{$opts{'showoption'}}) {
- if (defined($settings{$o})) {
- my ($v, $vo) = get_cfg($o);
- $v = "\"$v\"" if ($v =~ m/\s/);
- print "$o=$v ($vo)\n";
- } else {
- printf STDERR "$prg: unknown option: $o\n";
- }
- }
- exit 0;
- }
-
- if ($opts{'listmaps'}) {
- merge_settings_replace_kanji();
- for my $m (keys %{$alldata->{'maps'}}) {
- my $origin = $alldata->{'maps'}{$m}{'origin'};
- print $alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'}, " $m ",
- $alldata->{'updmap'}{$origin}{'maps'}{$m}{'status'}, " in $origin\n";
- }
- exit 0;
- }
-
- # we do changes always in the used config file with the highest
- # priority
- my $bakFile = $changes_config_file;
- $bakFile =~ s/\.cfg$/.bak/;
- my $changed = 0;
-
- if ($opts{'syncwithtrees'}) {
- merge_settings_replace_kanji();
- my @missing = read_map_files();
- if (@missing) {
- print "Missing map files found, disabling\n";
- for my $m (@missing) {
- my $orig = $alldata->{'maps'}{$m}{'origin'};
- print "\t$m (in $orig)\n";
- }
- print "in $changes_config_file\n";
- print "Do you really want to continue (y/N)? ";
- my $answer = <STDIN>;
- $answer = "n" if !defined($answer);
- chomp($answer);
- print "answer =$answer=\n";
- if ($answer ne "y" && $answer ne "Y") {
- print "Please fix manually before running updmap(-sys) again!\n";
- exit 0;
- }
- $changed ||= enable_disable_maps(@missing);
- print "finished.\n";
- # the original script did not run any update of the map files here,
- # should we do that?
- }
- exit 0;
- }
-
- $updLSR = &mktexupd();
- $updLSR->{mustexist}(0);
-
- my $cmd;
- if ($opts{'edit'}) {
- if ($opts{"dry-run"}) {
- printf STDERR "No, are you joking, you want to edit with --dry-run?\n";
- exit 1;
- }
- # it's not a good idea to edit updmap.cfg manually these days,
- # but for compatibility we'll silently keep the option.
- $cmd = 'edit';
- my $editor = $ENV{'VISUAL'} || $ENV{'EDITOR'};
- $editor ||= (&win32 ? "notepad" : "vi");
- if (-r $changes_config_file) {
- &copyFile($changes_config_file, $bakFile);
- } else {
- touch($bakFile);
- touch($changes_config_file);
- }
- system($editor, $changes_config_file);
- $changed = files_are_different($bakFile, $changes_config_file);
- } elsif ($opts{'setoption'}) {
- $cmd = 'setOption';
- $changed = setOptions (@{$opts{'setoption'}});
- } elsif ($opts{'enable'} || $opts{'disable'}) {
- $cmd = 'enableMap';
- $changed ||= enable_disable_maps(@{$opts{'enable'}}, @{$opts{'disable'}});
- }
-
-
- if ($cmd && !$opts{'force'} && !$changed) {
- print "$changes_config_file unchanged. Map files not recreated.\n"
- if !$opts{'quiet'};
- } else {
- if (!$opts{'nomkmap'}) {
- # before we continue we have to make sure that a newly created config
- # file is acually used. So we have to push the $changes_config_file
- # onto the list of available files. Since it is already properly
- # initialized and the merging is done later, all settings should be
- # honored
- my @aaa = @{$alldata->{'order'}};
- unshift @aaa, $changes_config_file;
- $alldata->{'order'} = [ @aaa ];
- #
- setupOutputDir("dvips");
- setupOutputDir("pdftex");
- setupOutputDir("dvipdfmx");
- setupOutputDir("pxdvi");
- merge_settings_replace_kanji();
- my @missing = read_map_files();
- if (@missing) {
- print STDERR "\nERROR: The following map file(s) couldn't be found:\n";
- for my $m (@missing) {
- my $orig = $alldata->{'maps'}{$m}{'origin'};
- print STDERR "\t$m (in $orig)\n";
- }
- print STDERR "\n\tDid you run mktexlsr?\n\n" .
- "\tYou can disable non-existent map entries using the option\n".
- "\t --syncwithtrees.\n\n";
- exit 1;
- }
- merge_data();
- # for inspecting the output
- #print STDERR Data::Dumper->Dump([$alldata], [qw(mapdata)]);
- #print Dumper($alldata);
- mkMaps();
- }
- unlink ($bakFile) if (-r $bakFile);
- }
-
- if (!$opts{'nohash'}) {
- print "$prg: Updating ls-R files.\n" if !$opts{'quiet'};
- $updLSR->{exec}() unless $opts{"dry-run"};
- }
-
- return 0;
-}
-
-##################################################################
-#
-#
-
-sub getFonts {
- my ($first, @rest) = @_;
- my $getall = 0;
- my @maps = ();
- return if !defined($first);
- if ($first eq "-all") {
- $getall = 1;
- @maps = @rest;
- } else {
- @maps = ($first, @rest);
- }
- my @lines = ();
- for my $m (@maps) {
- if (defined($alldata->{'maps'}{$m})) {
- print LOG "\n" . $alldata->{'maps'}{$m}{'fullpath'} . ":\n" unless $opts{'dry-run'};
- push @lines, "% $m";
- for my $k (sort keys %{$alldata->{'maps'}{$m}{'fonts'}}) {
- if ($getall || $alldata->{'fonts'}{$k}{'origin'} eq $m) {
- if (defined($alldata->{'maps'}{$m}{'fonts'}{$k})) {
- push @lines, "$k " . $alldata->{'maps'}{$m}{'fonts'}{$k};
- } else {
- print "undefined fonts for $k in $m ?!?!?\n";
- }
- print LOG "$k\n" unless $opts{'dry-run'};
- }
- }
- }
- }
- chomp @lines;
- return @lines;
-}
-
-###############################################################################
-# writeLines()
-# write the lines in $filename
-#
-sub writeLines {
- my ($fname, @lines) = @_;
- return if $opts{"dry-run"};
- map { ($_ !~ m/\n$/ ? s/$/\n/ : $_ ) } @lines;
- open FILE, ">$fname" or die "$prg: can't write lines to $fname: $!";
- print FILE @lines;
- close FILE;
-}
-
-###############################################################################
-# to_pdftex()
-# if $pdftexStripEnc is set, strip "PS_Encoding_Name ReEncodeFont"
-# from map entries; they are ignored by pdftex. But since the sh
-# incarnation of updmap included them, and we want to minimize
-# differences, this is not done by default.
-#
-sub to_pdftex {
- my $pdftexStripEnc = 0;
- return @_ unless $pdftexStripEnc;
- my @in = @_;
- my @out;
- foreach my $line (@in) {
- if ($line =~ /^(.*\s+)(\S+\s+ReEncodeFont\s)(.*)/) {
- $line = "$1$3";
- $line =~ s/\s+\"\s+\"\s+/ /;
- }
- push @out, $line;
- }
- return @out;
-}
-
-###############################################################################
-# setupSymlinks()
-# set symlink for psfonts.map according to dvipsPreferOutline variable
-#
-sub setupSymlinks {
- my ($dvipsPreferOutline, $dvipsoutputdir, $pdftexDownloadBase14, $pdftexoutputdir) = @_;
- my $src;
- my %link;
- my @link;
-
- if ($dvipsPreferOutline eq "true") {
- $src = "psfonts_t1.map";
- } else {
- $src = "psfonts_pk.map";
- }
- unlink "$dvipsoutputdir/psfonts.map" unless $opts{"dry-run"};
- push @link, &SymlinkOrCopy("$dvipsoutputdir", "$src", "psfonts.map");
-
- if ($pdftexDownloadBase14 eq "true") {
- $src = "pdftex_dl14.map";
- } else {
- $src = "pdftex_ndl14.map";
- }
- unlink "$pdftexoutputdir/pdftex.map" unless $opts{"dry-run"};
- push @link, &SymlinkOrCopy("$pdftexoutputdir", "$src", "pdftex.map");
- %link = @link;
- return \%link;
-}
-
-###############################################################################
-# SymlinkOrCopy(dir, src, dest)
-# create symlinks if possible, otherwise copy files
-#
-sub SymlinkOrCopy {
- my ($dir, $src, $dest) = @_;
- return ($src, $dest) if $opts{"dry-run"};
- if (&win32 || $opts{'copy'}) { # always copy
- &copyFile("$dir/$src", "$dir/$dest");
- } else { # symlink if supported by fs, copy otherwise
- system("cd \"$dir\" && ln -s $src $dest 2>/dev/null || "
- . "cp -p \"$dir/$src\" \"$dir/$dest\"");
- }
- # remember for "Files generated" in &mkMaps.
- return ($dest, $src);
-}
-
-
-###############################################################################
-# transLW35(mode args ...)
-# transform fontname and filenames according to transformation specified
-# by mode. Possible values:
-# URW|URWkb|ADOBE|ADOBEkb
-#
-sub transLW35 {
- my ($mode, @lines) = @_;
-
- my @psADOBE = (
- 's/ URWGothicL-Demi / AvantGarde-Demi /',
- 's/ URWGothicL-DemiObli / AvantGarde-DemiOblique /',
- 's/ URWGothicL-Book / AvantGarde-Book /',
- 's/ URWGothicL-BookObli / AvantGarde-BookOblique /',
- 's/ URWBookmanL-DemiBold / Bookman-Demi /',
- 's/ URWBookmanL-DemiBoldItal / Bookman-DemiItalic /',
- 's/ URWBookmanL-Ligh / Bookman-Light /',
- 's/ URWBookmanL-LighItal / Bookman-LightItalic /',
- 's/ NimbusMonL-Bold / Courier-Bold /',
- 's/ NimbusMonL-BoldObli / Courier-BoldOblique /',
- 's/ NimbusMonL-Regu / Courier /',
- 's/ NimbusMonL-ReguObli / Courier-Oblique /',
- 's/ NimbusSanL-Bold / Helvetica-Bold /',
- 's/ NimbusSanL-BoldCond / Helvetica-Narrow-Bold /',
- 's/ NimbusSanL-BoldItal / Helvetica-BoldOblique /',
- 's/ NimbusSanL-BoldCondItal / Helvetica-Narrow-BoldOblique /',
- 's/ NimbusSanL-Regu / Helvetica /',
- 's/ NimbusSanL-ReguCond / Helvetica-Narrow /',
- 's/ NimbusSanL-ReguItal / Helvetica-Oblique /',
- 's/ NimbusSanL-ReguCondItal / Helvetica-Narrow-Oblique /',
- 's/ CenturySchL-Bold / NewCenturySchlbk-Bold /',
- 's/ CenturySchL-BoldItal / NewCenturySchlbk-BoldItalic /',
- 's/ CenturySchL-Roma / NewCenturySchlbk-Roman /',
- 's/ CenturySchL-Ital / NewCenturySchlbk-Italic /',
- 's/ URWPalladioL-Bold / Palatino-Bold /',
- 's/ URWPalladioL-BoldItal / Palatino-BoldItalic /',
- 's/ URWPalladioL-Roma / Palatino-Roman /',
- 's/ URWPalladioL-Ital / Palatino-Italic /',
- 's/ StandardSymL / Symbol /',
- 's/ NimbusRomNo9L-Medi / Times-Bold /',
- 's/ NimbusRomNo9L-MediItal / Times-BoldItalic /',
- 's/ NimbusRomNo9L-Regu / Times-Roman /',
- 's/ NimbusRomNo9L-ReguItal / Times-Italic /',
- 's/ URWChanceryL-MediItal / ZapfChancery-MediumItalic /',
- 's/ Dingbats / ZapfDingbats /',
- );
-
- my @fileADOBEkb = (
- 's/\buagd8a.pfb\b/pagd8a.pfb/',
- 's/\buagdo8a.pfb\b/pagdo8a.pfb/',
- 's/\buagk8a.pfb\b/pagk8a.pfb/',
- 's/\buagko8a.pfb\b/pagko8a.pfb/',
- 's/\bubkd8a.pfb\b/pbkd8a.pfb/',
- 's/\bubkdi8a.pfb\b/pbkdi8a.pfb/',
- 's/\bubkl8a.pfb\b/pbkl8a.pfb/',
- 's/\bubkli8a.pfb\b/pbkli8a.pfb/',
- 's/\bucrb8a.pfb\b/pcrb8a.pfb/',
- 's/\bucrbo8a.pfb\b/pcrbo8a.pfb/',
- 's/\bucrr8a.pfb\b/pcrr8a.pfb/',
- 's/\bucrro8a.pfb\b/pcrro8a.pfb/',
- 's/\buhvb8a.pfb\b/phvb8a.pfb/',
- 's/\buhvb8ac.pfb\b/phvb8an.pfb/',
- 's/\buhvbo8a.pfb\b/phvbo8a.pfb/',
- 's/\buhvbo8ac.pfb\b/phvbo8an.pfb/',
- 's/\buhvr8a.pfb\b/phvr8a.pfb/',
- 's/\buhvr8ac.pfb\b/phvr8an.pfb/',
- 's/\buhvro8a.pfb\b/phvro8a.pfb/',
- 's/\buhvro8ac.pfb\b/phvro8an.pfb/',
- 's/\buncb8a.pfb\b/pncb8a.pfb/',
- 's/\buncbi8a.pfb\b/pncbi8a.pfb/',
- 's/\buncr8a.pfb\b/pncr8a.pfb/',
- 's/\buncri8a.pfb\b/pncri8a.pfb/',
- 's/\buplb8a.pfb\b/pplb8a.pfb/',
- 's/\buplbi8a.pfb\b/pplbi8a.pfb/',
- 's/\buplr8a.pfb\b/pplr8a.pfb/',
- 's/\buplri8a.pfb\b/pplri8a.pfb/',
- 's/\busyr.pfb\b/psyr.pfb/',
- 's/\butmb8a.pfb\b/ptmb8a.pfb/',
- 's/\butmbi8a.pfb\b/ptmbi8a.pfb/',
- 's/\butmr8a.pfb\b/ptmr8a.pfb/',
- 's/\butmri8a.pfb\b/ptmri8a.pfb/',
- 's/\buzcmi8a.pfb\b/pzcmi8a.pfb/',
- 's/\buzdr.pfb\b/pzdr.pfb/',
- );
-
- my @fileURW = (
- 's/\buagd8a.pfb\b/a010015l.pfb/',
- 's/\buagdo8a.pfb\b/a010035l.pfb/',
- 's/\buagk8a.pfb\b/a010013l.pfb/',
- 's/\buagko8a.pfb\b/a010033l.pfb/',
- 's/\bubkd8a.pfb\b/b018015l.pfb/',
- 's/\bubkdi8a.pfb\b/b018035l.pfb/',
- 's/\bubkl8a.pfb\b/b018012l.pfb/',
- 's/\bubkli8a.pfb\b/b018032l.pfb/',
- 's/\bucrb8a.pfb\b/n022004l.pfb/',
- 's/\bucrbo8a.pfb\b/n022024l.pfb/',
- 's/\bucrr8a.pfb\b/n022003l.pfb/',
- 's/\bucrro8a.pfb\b/n022023l.pfb/',
- 's/\buhvb8a.pfb\b/n019004l.pfb/',
- 's/\buhvb8ac.pfb\b/n019044l.pfb/',
- 's/\buhvbo8a.pfb\b/n019024l.pfb/',
- 's/\buhvbo8ac.pfb\b/n019064l.pfb/',
- 's/\buhvr8a.pfb\b/n019003l.pfb/',
- 's/\buhvr8ac.pfb\b/n019043l.pfb/',
- 's/\buhvro8a.pfb\b/n019023l.pfb/',
- 's/\buhvro8ac.pfb\b/n019063l.pfb/',
- 's/\buncb8a.pfb\b/c059016l.pfb/',
- 's/\buncbi8a.pfb\b/c059036l.pfb/',
- 's/\buncr8a.pfb\b/c059013l.pfb/',
- 's/\buncri8a.pfb\b/c059033l.pfb/',
- 's/\buplb8a.pfb\b/p052004l.pfb/',
- 's/\buplbi8a.pfb\b/p052024l.pfb/',
- 's/\buplr8a.pfb\b/p052003l.pfb/',
- 's/\buplri8a.pfb\b/p052023l.pfb/',
- 's/\busyr.pfb\b/s050000l.pfb/',
- 's/\butmb8a.pfb\b/n021004l.pfb/',
- 's/\butmbi8a.pfb\b/n021024l.pfb/',
- 's/\butmr8a.pfb\b/n021003l.pfb/',
- 's/\butmri8a.pfb\b/n021023l.pfb/',
- 's/\buzcmi8a.pfb\b/z003034l.pfb/',
- 's/\buzdr.pfb\b/d050000l.pfb/',
- );
-
- my @fileADOBE = (
- 's/\buagd8a.pfb\b/agd_____.pfb/',
- 's/\buagdo8a.pfb\b/agdo____.pfb/',
- 's/\buagk8a.pfb\b/agw_____.pfb/',
- 's/\buagko8a.pfb\b/agwo____.pfb/',
- 's/\bubkd8a.pfb\b/bkd_____.pfb/',
- 's/\bubkdi8a.pfb\b/bkdi____.pfb/',
- 's/\bubkl8a.pfb\b/bkl_____.pfb/',
- 's/\bubkli8a.pfb\b/bkli____.pfb/',
- 's/\bucrb8a.pfb\b/cob_____.pfb/',
- 's/\bucrbo8a.pfb\b/cobo____.pfb/',
- 's/\bucrr8a.pfb\b/com_____.pfb/',
- 's/\bucrro8a.pfb\b/coo_____.pfb/',
- 's/\buhvb8a.pfb\b/hvb_____.pfb/',
- 's/\buhvb8ac.pfb\b/hvnb____.pfb/',
- 's/\buhvbo8a.pfb\b/hvbo____.pfb/',
- 's/\buhvbo8ac.pfb\b/hvnbo___.pfb/',
- 's/\buhvr8a.pfb\b/hv______.pfb/',
- 's/\buhvr8ac.pfb\b/hvn_____.pfb/',
- 's/\buhvro8a.pfb\b/hvo_____.pfb/',
- 's/\buhvro8ac.pfb\b/hvno____.pfb/',
- 's/\buncb8a.pfb\b/ncb_____.pfb/',
- 's/\buncbi8a.pfb\b/ncbi____.pfb/',
- 's/\buncr8a.pfb\b/ncr_____.pfb/',
- 's/\buncri8a.pfb\b/nci_____.pfb/',
- 's/\buplb8a.pfb\b/pob_____.pfb/',
- 's/\buplbi8a.pfb\b/pobi____.pfb/',
- 's/\buplr8a.pfb\b/por_____.pfb/',
- 's/\buplri8a.pfb\b/poi_____.pfb/',
- 's/\busyr.pfb\b/sy______.pfb/',
- 's/\butmb8a.pfb\b/tib_____.pfb/',
- 's/\butmbi8a.pfb\b/tibi____.pfb/',
- 's/\butmr8a.pfb\b/tir_____.pfb/',
- 's/\butmri8a.pfb\b/tii_____.pfb/',
- 's/\buzcmi8a.pfb\b/zcmi____.pfb/',
- 's/\buzdr.pfb\b/zd______.pfb/',
- );
-
- if ($mode eq "" || $mode eq "URWkb") {
- # do nothing
- } elsif ($mode eq "URW") {
- for my $r (@fileURW) {
- map { eval($r); } @lines;
- }
- } elsif ($mode eq "ADOBE" || $mode eq "ADOBEkb") {
- for my $r (@psADOBE) {
- map { eval($r); } @lines;
- }
- my @filemode = eval ("\@file" . $mode);
- for my $r (@filemode) {
- map { eval($r); } @lines;
- }
- }
- return @lines;
-}
-
-###############################################################################
-# cidx2dvips()
-# reads from stdin, writes to stdout. It transforms "cid-x"-like syntax into
-# "dvips"-like syntax.
-#
-# Specifying the PS Name:
-# dvips needs the PSname instead of the file name. Thus we allow specifying
-# the PSname in the comment:
-# The PS Name can be specified in the font definition line
-# by including the following sequence somewhere after the
-# other components:
-#
-# %!PS<SPACE-TAB><PSNAME><NON-WORD-CHAR-OR-EOL>
-#
-# where
-# <SPACE-TAB> is either a space or a tab character
-# <PSNAME> is *one* word, defined by \w\w* perl re
-# <NON-WORD-CHAR-OR-EOL> is a non-\w char or the end of line
-#
-# That means we could have
-# ... %here the PS font name: %!PS fontname some other comment
-# ... %!PS fontname %other comments
-# ... %!PS fontname
-#
-###############################################################################
-
-# reimplementation of the cryptic code that was there before
-sub cidx2dvips {
- my ($s) = @_;
- my %fname_psname = (
- # Morisawa
- 'A-OTF-FutoGoB101Pr6N-Bold' => 'FutoGoB101Pr6N-Bold',
- 'A-OTF-FutoGoB101Pro-Bold' => 'FutoGoB101Pro-Bold',
- 'A-OTF-FutoMinA101Pr6N-Bold' => 'FutoMinA101Pr6N-Bold',
- 'A-OTF-FutoMinA101Pro-Bold' => 'FutoMinA101Pro-Bold',
- 'A-OTF-GothicBBBPr6N-Medium' => 'GothicBBBPr6N-Medium',
- 'A-OTF-GothicBBBPro-Medium' => 'GothicBBBPro-Medium',
- 'A-OTF-Jun101Pr6N-Light' => 'Jun101Pr6N-Light',
- 'A-OTF-Jun101Pro-Light' => 'Jun101Pro-Light',
- 'A-OTF-MidashiGoPr6N-MB31' => 'MidashiGoPr6N-MB31',
- 'A-OTF-MidashiGoPro-MB31' => 'MidashiGoPro-MB31',
- 'A-OTF-RyuminPr6N-Light' => 'RyuminPr6N-Light',
- 'A-OTF-RyuminPro-Light' => 'RyuminPro-Light',
- # Hiragino font file names and PS names are the same
- #
- # IPA
- 'ipaexg' => 'IPAexGothic',
- 'ipaexm' => 'IPAexMincho',
- 'ipag' => 'IPAGothic',
- 'ipam' => 'IPAMincho',
- #
- # Kozuka font names and PS names are the same
- );
- my @d;
- foreach (@$s) {
- # ship empty lines and comment lines out as is
- if (m/^\s*(%.*)?$/) {
- push(@d, $_);
- next;
- }
- # get rid of new lines for now
- chomp;
- # save the line for warnings
- my $l = $_;
- # first check whether a PSname is given
- my $psname;
- #
- # the matching on \w* is greedy, so will take all the word chars available
- # that means we do not need to test for end of word
- if ($_ =~ m/%!PS\s\s*([0-9A-Za-z-_][0-9A-Za-z-_]*)/) {
- $psname = $1;
- }
- # remove comments
- s/[^0-9A-Za-z-_]*%.*$//;
- # replace supported ",SOMETHING" constructs
- my $italicmax = 0;
- if (m/,BoldItalic/) {
- $italicmax = .3;
- s/,BoldItalic//;
- }
- s/,Bold//;
- if (m/,Italic/) {
- $italicmax = .3;
- s/,Italic//;
- }
- # break out if unsupported constructs are found: @ / ,
- next if (m![\@/,]!);
- # make everything single spaced
- s/\s\s*/ /g;
- # unicode encoded fonts are not supported
- next if (m!^\w\w* unicode !);
- # now we have the following format
- # <word> <word> <word> some options like -e or -s
- if ($_ !~ m/([^ ][^ ]*) ([^ ][^ ]*) ([^ ][^ ]*)( (.*))?$/) {
- print STDERR "cidx2dvips warning: Cannot translate font line:\n==> $l\n";
- print STDERR "Current translation status: ==>$_==\n";
- next;
- }
- my $tfmname = $1;
- my $cid = $2;
- my $fname = $3;
- my $opts = (defined($5) ? " $5" : "");
- # remove extensions from $fname
- $fname =~ s/\.[Oo][Tt][Ff]//;
- $fname =~ s/\.[Tt][Tt][FfCc]//;
- # remove leading ! from $fname
- $fname =~ s/^!//;
- # remove leading :<number>: from $fname
- $fname =~ s/:[0-9]+://;
- # remove leading space from $opt
- $opts =~ s/^\s+//;
- # replace -e and -s in the options
- $opts =~ s/-e ([.0-9-][.0-9-]*)/ "$1 ExtendFont"/;
- if (m/-s ([.0-9-][.0-9-]*)/) {
- if ($italicmax > 0) {
- # we have already a definition of SlantFont via ,Italic or ,BoldItalic
- # warn the user that larger one is kept
- print STDERR "cidx2dvips: warning: Double slant specified via Italic and -s:\n==> $l\n==> Using only the biggest slant value.\n";
- }
- $italicmax = $1 if ($1 > $italicmax);
- $opts =~ s/-s ([.0-9-][.0-9-]*)//;
- }
- if ($italicmax != 0) {
- $opts .= " \"$italicmax SlantFont\"";
- }
- # print out the result
- if (defined($psname)) {
- push @d, "$tfmname $psname-$cid$opts\n";
- } else {
- if (defined($fname_psname{$fname})) {
- push @d, "$tfmname $fname_psname{$fname}-$cid$opts\n";
- } else {
- push @d, "$tfmname $fname-$cid$opts\n";
- }
- }
- }
- return @d;
-}
-
-sub cidx2dvips_old {
- my ($s) = @_;
- my @d;
- foreach (@$s) {
- if (m/^%/) {
- push(@d, $_);
- next;
- }
- s/,BoldItalic/ -s .3/;
- s/,Bold//;
- s/,Italic/ -s .3/;
- s/\s\s*/ /g;
- if ($_ =~ /.*[@\:\/,]/) {next;}
- elsif ($_ =~ /^[^ ][^ ]* unicode /) {next;}
- s/^([^ ][^ ]* [^ ][^ ]* [^ ][^ ]*)\.[Oo][Tt][Ff]/$1/;
- s/^([^ ][^ ]* [^ ][^ ]* [^ ][^ ]*)\.[Tt][Tt][FfCc]/$1/;
- s/$/ %/;
- s/^(([^ ]*).*)/$1$2/;
- s/^([^ ][^ ]* ([^ ][^ ]*) !*([^ ][^ ]*).*)/$1 $3-$2/;
- s/^(.* -e ([.0-9-][.0-9-]*).*)/$1 "$2 ExtendFont"/;
- s/^(.* -s ([.0-9-][.0-9-]*).*)/$1 "$2 SlantFont"/;
- s/.*%//;
- push(@d, $_);
- }
- return @d
-}
-
-sub get_cfg {
- my ($v) = @_;
- if (defined($alldata->{'merged'}{'setting'}{$v})) {
- return ( $alldata->{'merged'}{'setting'}{$v}{'val'},
- $alldata->{'merged'}{'setting'}{$v}{'origin'} );
- } else {
- return ($settings{$v}{'default'}, "default");
- }
-}
-
-sub mkMaps {
- my $logfile;
-
- $logfile = "$TEXMFVAR/web2c/updmap.log";
-
- if (! $opts{'dry-run'}) {
- mkdirhier("$TEXMFVAR/web2c");
- open LOG, ">$logfile"
- or die "$prg: Can't open log file \"$logfile\": $!";
- print LOG &version();
- printf LOG "%s\n\n", scalar localtime();
- print LOG "Using the following config files:\n";
- for (@{$opts{'cnffile'}}) {
- print LOG " $_\n";
- }
- }
- sub print_and_log {
- my $str=shift;
- print $str if !$opts{'quiet'};
- print LOG $str unless $opts{'dry-run'};
- }
- sub only_log {
- print LOG shift unless $opts{'dry-run'};
- }
-
- my ($mode, $mode_origin) = get_cfg('LW35');
- my ($dvipsPreferOutline, $dvipsPreferOutline_origin) =
- get_cfg('dvipsPreferOutline');
- my ($dvipsDownloadBase35, $dvipsDownloadBase35_origin) =
- get_cfg('dvipsDownloadBase35');
- my ($pdftexDownloadBase14, $pdftexDownloadBase14_origin) =
- get_cfg('pdftexDownloadBase14');
- my ($pxdviUse, $pxdviUse_origin) = get_cfg('pxdviUse');
- my ($kanjiEmbed, $kanjiEmbed_origin) = get_cfg('kanjiEmbed');
- my ($kanjiVariant, $kanjiVariant_origin) = get_cfg('kanjiVariant');
-
- print_and_log ("\n$prg is creating new map files"
- . "\nusing the following configuration:"
- . "\n LW35 font names : "
- . "$mode ($mode_origin)"
- . "\n prefer outlines : "
- . "$dvipsPreferOutline ($dvipsPreferOutline_origin)"
- . "\n texhash enabled : "
- . ($opts{'nohash'} ? "false" : "true")
- . "\n download standard fonts (dvips) : "
- . "$dvipsDownloadBase35 ($dvipsDownloadBase35_origin)"
- . "\n download standard fonts (pdftex) : "
- . "$pdftexDownloadBase14 ($pdftexDownloadBase14_origin)"
- . "\n kanjiEmbed replacement string : "
- . "$kanjiEmbed ($kanjiEmbed_origin)"
- . "\n kanjiVariant replacement string : "
- . "$kanjiVariant ($kanjiVariant_origin)"
- . "\n create a mapfile for pxdvi : "
- . "$pxdviUse ($pxdviUse_origin)"
- . "\n\n");
-
- print_and_log ("Scanning for LW35 support files");
- my $dvips35 = $alldata->{'maps'}{"dvips35.map"}{'fullpath'};
- my $pdftex35 = $alldata->{'maps'}{"pdftex35.map"}{'fullpath'};
- my $ps2pk35 = $alldata->{'maps'}{"ps2pk35.map"}{'fullpath'};
- my $LW35 = "\n$dvips35\n$pdftex35\n$ps2pk35\n\n";
- only_log ("\n");
- only_log ($LW35);
- print_and_log (" [ 3 files]\n");
- only_log ("\n");
-
- print_and_log ("Scanning for MixedMap entries");
- my @mixedmaps;
- my @notmixedmaps;
- my @kanjimaps;
- for my $m (keys %{$alldata->{'maps'}}) {
- my $origin = $alldata->{'maps'}{$m}{'origin'};
- next if !defined($origin);
- next if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'status'} eq "disabled");
- push @mixedmaps, $m
- if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "MixedMap");
- push @notmixedmaps, $m
- if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "Map");
- push @kanjimaps, $m
- if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "KanjiMap");
- }
-
- @mixedmaps = sort @mixedmaps;
- @notmixedmaps = sort @notmixedmaps;
- @kanjimaps = sort @kanjimaps;
- only_log("\n");
- foreach my $m (sort @mixedmaps) {
- if (defined($alldata->{'maps'}{$m}{'fullpath'})) {
- only_log($alldata->{'maps'}{$m}{'fullpath'} . "\n");
- } else {
- only_log("$m (full path not set?)\n");
- }
- }
- only_log("\n");
- print_and_log (sprintf(" [%3d files]\n", scalar @mixedmaps));
- only_log("\n");
-
- print_and_log ("Scanning for KanjiMap entries");
- only_log("\n");
- foreach my $m (@kanjimaps) {
- if (defined($alldata->{'maps'}{$m}{'fullpath'})) {
- only_log($alldata->{'maps'}{$m}{'fullpath'} . "\n");
- } else {
- only_log("$m (full path not set?)\n");
- }
- }
- only_log("\n");
- print_and_log (sprintf(" [%3d files]\n", scalar @kanjimaps));
- only_log("\n");
-
- print_and_log ("Scanning for Map entries");
- only_log("\n");
- foreach my $m (@notmixedmaps) {
- if (defined($alldata->{'maps'}{$m}{'fullpath'})) {
- only_log($alldata->{'maps'}{$m}{'fullpath'} . "\n");
- } else {
- only_log("$m (full path not set?)\n");
- }
- }
- only_log("\n");
- print_and_log (sprintf(" [%3d files]\n\n", scalar @notmixedmaps));
- only_log("\n");
-
- # Create psfonts_t1.map, psfonts_pk.map, ps2pk.map and pdftex.map:
- my $dvipsoutputdir = $opts{'dvipsoutputdir'};
- my $pdftexoutputdir = $opts{'pdftexoutputdir'};
- my $dvipdfmxoutputdir = $opts{'dvipdfmxoutputdir'};
- my $pxdvioutputdir = $opts{'pxdvioutputdir'};
- if (!$opts{'dry-run'}) {
- my @managed_files = ("$dvipsoutputdir/download35.map",
- "$dvipsoutputdir/builtin35.map",
- "$dvipsoutputdir/psfonts_t1.map",
- "$dvipsoutputdir/psfonts_pk.map",
- "$pdftexoutputdir/pdftex_dl14.map",
- "$pdftexoutputdir/pdftex_ndl14.map",
- "$dvipdfmxoutputdir/kanjix.map",
- "$dvipsoutputdir/ps2pk.map");
- push @managed_files, "$pxdvioutputdir/xdvi-ptex.map"
- if ($pxdviUse eq "true");
- for my $file (@managed_files) {
- open FILE, ">$file";
- print FILE "% $file:\
-% maintained by updmap[-sys] (multi).\
-% Don't change this file directly. Use updmap[-sys] instead.\
-% See the updmap documentation.\
-% A log of the run that created this file is available here:\
-% $logfile\
-";
- close FILE;
- }
- }
-
- my @kanjimaps_fonts = getFonts(@kanjimaps);
- @kanjimaps_fonts = &normalizeLines(@kanjimaps_fonts);
- my @ps2pk_fonts = getFonts('-all', "ps2pk35.map");
- my @dvips35_fonts = getFonts('-all', "dvips35.map");
- my @pdftex35_fonts = getFonts('-all', "pdftex35.map");
- my @mixedmaps_fonts = getFonts(@mixedmaps);
- my @notmixedmaps_fonts = getFonts(@notmixedmaps);
-
- print "Generating output for dvipdfmx...\n" if !$opts{'quiet'};
- &writeLines(">$dvipdfmxoutputdir/kanjix.map", @kanjimaps_fonts);
-
- if ($pxdviUse eq "true") {
- # we use the very same data as for kanjix.map, but generate
- # a different file, so that in case a user wants to hand-craft it
- print "Generating output for pxdvi...\n" if !$opts{'quiet'};
- &writeLines(">$pxdvioutputdir/xdvi-ptex.map", @kanjimaps_fonts);
- }
-
-
- print "Generating output for ps2pk...\n" if !$opts{'quiet'};
- my @ps2pk_map;
- push @ps2pk_map, "% ps2pk35.map";
- push @ps2pk_map, transLW35($mode, @ps2pk_fonts);
- push @ps2pk_map, @mixedmaps_fonts;
- push @ps2pk_map, @notmixedmaps_fonts;
- &writeLines(">$dvipsoutputdir/ps2pk.map",
- normalizeLines(@ps2pk_map));
-
- print "Generating output for dvips...\n" if !$opts{'quiet'};
- my @download35_map;
- push @download35_map, "% ps2pk35.map";
- push @download35_map, transLW35($mode, @ps2pk_fonts);
- &writeLines(">$dvipsoutputdir/download35.map",
- normalizeLines(@download35_map));
-
- my @builtin35_map;
- push @builtin35_map, "% dvips35.map";
- push @builtin35_map, transLW35($mode, @dvips35_fonts);
- &writeLines(">$dvipsoutputdir/builtin35.map",
- normalizeLines(@builtin35_map));
-
- my @dftdvips_fonts =
- (($dvipsDownloadBase35 eq "true") ? @ps2pk_fonts : @dvips35_fonts);
-
- my @psfonts_t1_map;
- if ($dvipsDownloadBase35 eq "true") {
- push @psfonts_t1_map, "% ps2pk35.map";
- @dftdvips_fonts = @ps2pk_fonts;
- } else {
- push @psfonts_t1_map, "% dvips35.map";
- @dftdvips_fonts = @dvips35_fonts;
- }
- push @psfonts_t1_map, transLW35($mode, @dftdvips_fonts);
- my @tmpkanji2 = cidx2dvips(\@kanjimaps_fonts);
- push @psfonts_t1_map, @mixedmaps_fonts;
- push @psfonts_t1_map, @notmixedmaps_fonts;
- push @psfonts_t1_map, @tmpkanji2;
- &writeLines(">$dvipsoutputdir/psfonts_t1.map",
- normalizeLines(@psfonts_t1_map));
-
- my @psfonts_pk_map;
- push @psfonts_pk_map, transLW35($mode, @dftdvips_fonts);
- push @psfonts_pk_map, @notmixedmaps_fonts;
- push @psfonts_pk_map, @tmpkanji2;
- &writeLines(">$dvipsoutputdir/psfonts_pk.map",
- normalizeLines(@psfonts_pk_map));
-
- print "Generating output for pdftex...\n" if !$opts{'quiet'};
- # remove PaintType due to Sebastian's request
- my @pdftexmaps_ndl;
- push @pdftexmaps_ndl, "% pdftex35.map";
- push @pdftexmaps_ndl, transLW35($mode, @pdftex35_fonts);
- push @pdftexmaps_ndl, @mixedmaps_fonts;
- push @pdftexmaps_ndl, @notmixedmaps_fonts;
- @pdftexmaps_ndl = grep { $_ !~ m/(^%\|PaintType)/ } @pdftexmaps_ndl;
-
- my @pdftexmaps_dl;
- push @pdftexmaps_dl, "% ps2pk35.map";
- push @pdftexmaps_dl, transLW35($mode, @ps2pk_fonts);
- push @pdftexmaps_dl, @mixedmaps_fonts;
- push @pdftexmaps_dl, @notmixedmaps_fonts;
- @pdftexmaps_dl = grep { $_ !~ m/(^%\|PaintType)/ } @pdftexmaps_dl;
-
- my @pdftex_ndl14_map = @pdftexmaps_ndl;
- @pdftex_ndl14_map = &normalizeLines(@pdftex_ndl14_map);
- @pdftex_ndl14_map = &to_pdftex(@pdftex_ndl14_map);
- &writeLines(">$pdftexoutputdir/pdftex_ndl14.map", @pdftex_ndl14_map);
-
- my @pdftex_dl14_map = @pdftexmaps_dl;
- @pdftex_dl14_map = &normalizeLines(@pdftex_dl14_map);
- @pdftex_dl14_map = &to_pdftex(@pdftex_dl14_map);
- &writeLines(">$pdftexoutputdir/pdftex_dl14.map", @pdftex_dl14_map);
-
- our $link = &setupSymlinks($dvipsPreferOutline, $dvipsoutputdir, $pdftexDownloadBase14, $pdftexoutputdir);
-
- print_and_log ("\nFiles generated:\n");
- sub dir {
- my ($d, $f, $target)=@_;
- our $link;
- if (-e "$d/$f") {
- my @stat=lstat("$d/$f");
- my ($s,$m,$h,$D,$M,$Y)=localtime($stat[9]);
- my $timestamp=sprintf ("%04d-%02d-%02d %02d:%02d:%02d",
- $Y+1900, $M+1, $D, $h, $m, $s);
- my $date=sprintf "%12d %s %s", $stat[7], $timestamp, $f;
- print_and_log ($date);
-
- if (-l "$d/$f") {
- my $lnk=sprintf " -> %s\n", readlink ("$d/$f");
- print_and_log ($lnk);
- } elsif ($f eq $target) {
- if (&files_are_identical("$d/$f", "$d/" . $link->{$target})) {
- print_and_log (" = $link->{$target}\n");
- } else {
- print_and_log (" = ?????\n"); # This shouldn't happen.
- }
- } else {
- print_and_log ("\n");
- }
- } else {
- print STDERR "Warning: File $d/$f doesn't exist.\n";
- print LOG "Warning: File $d/$f doesn't exist.\n"
- unless $opts{'dry-run'};
- }
- }
-
- my $d;
- $d = "$dvipsoutputdir";
- print_and_log(" $d:\n");
- foreach my $f ('builtin35.map', 'download35.map', 'psfonts_pk.map',
- 'psfonts_t1.map', 'ps2pk.map', 'psfonts.map') {
- dir ($d, $f, 'psfonts.map');
- $updLSR->{add}("$d/$f") unless $opts{'dry-run'};
- }
- $d = "$pdftexoutputdir";
- print_and_log(" $d:\n");
- foreach my $f ('pdftex_dl14.map', 'pdftex_ndl14.map', 'pdftex.map') {
- dir ($d, $f, 'pdftex.map');
- $updLSR->{add}("$d/$f") unless $opts{'dry-run'};
- }
- $d="$dvipdfmxoutputdir";
- print_and_log(" $d:\n");
- foreach my $f ('kanjix.map') {
- dir ($d, $f, '');
- $updLSR->{add}("$d/$f") unless $opts{'dry-run'};
- }
- if ($pxdviUse eq "true") {
- $d="$pxdvioutputdir";
- print_and_log(" $d:\n");
- foreach my $f ('xdvi-ptex.map') {
- dir ($d, $f, '');
- $updLSR->{add}("$d/$f") unless $opts{'dry-run'};
- }
- }
- close LOG unless $opts{'dry-run'};
- print "\nTranscript written on \"$logfile\".\n" if !$opts{'quiet'};
-
-}
-
-
-sub locateMap {
- my $map = shift;
- my $ret = `kpsewhich --format=map $map`;
- chomp($ret);
- return $ret;
-}
-
-sub processOptions {
- # first process the stupid setoption= s@{1,2} which is not accepted
- # furthermore, try to work around missing s{1,2} support in older perls
- my $oldconfig = Getopt::Long::Configure(qw(pass_through));
- our @setoptions;
- our @enable;
- sub read_one_or_two {
- my ($opt, $val) = @_;
- our @setoptions;
- our @enable;
- # check if = occirs in $val, if not, get the next argument
- if ($val =~ m/=/) {
- if ($opt eq "setoption") {
- push @setoptions, $val;
- } else {
- push @enable, $val;
- }
- } else {
- my $vv = shift @ARGV;
- die "Try \"$prg --help\" for more information.\n"
- if !defined($vv);
- if ($opt eq "setoption") {
- push @setoptions, "$val=$vv";
- } else {
- push @enable, "$val=$vv";
- }
- }
- }
- GetOptions("setoption=s@" => \&read_one_or_two,
- "enable=s@" => \&read_one_or_two) or
- die "Try \"$prg --help\" for more information.\n";
-
- @{$opts{'setoption'}} = @setoptions if (@setoptions);
- @{$opts{'enable'}} = @enable if (@enable);
-
- Getopt::Long::Configure($oldconfig);
-
- # now continue with normal option handling
-
- GetOptions(\%opts, @cmdline_options) or
- die "Try \"$prg --help\" for more information.\n";
-}
-
-# determines the output dir for driver from cmd line, or if not given
-# from TEXMFVAR
-sub setupOutputDir {
- my $driver = shift;
- if (!$opts{$driver . "outputdir"}) {
- if ($opts{'outputdir'}) {
- $opts{$driver . "outputdir"} = $opts{'outputdir'};
- } else {
- $opts{$driver . "outputdir"} = "$TEXMFVAR/fonts/map/$driver/updmap";
- }
- }
- my $od = $opts{$driver . "outputdir"};
- if (!$opts{"dry-run"}) {
- &mkdirhier($od);
- if (! -w $od) {
- die "$prg: Directory \"$od\" isn't writable: $!";
- }
- }
- print "$driver output dir: \"$od\"\n" if !$opts{'quiet'};
- return $od;
-}
-
-###############################################################################
-# setOption (@options)
-# parse @options for "key=value" (one element of @options)
-# we can only have "key=value" since that is the way it was prepared
-# in process_options
-# (These were the values provided to --setoption.)
-#
-sub setOptions {
- my (@options) = @_;
- for (my $i = 0; $i < @options; $i++) {
- my $o = $options[$i];
-
- my ($key,$val) = split (/=/, $o, 2);
-
- die "$prg: unexpected empty key or val for options (@options), goodbye.\n"
- if !$key || !defined($val);
-
- &setOption ($key, $val);
- }
- return save_updmap($alldata->{'changes_config'});
-}
-
-sub enable_disable_maps {
- my (@what) = @_;
- my $tc = $alldata->{'changes_config'};
- die "$prg: top config file $tc has not been read."
- if (!defined($alldata->{'updmap'}{$tc}));
- my $changed = 0;
-
- for my $w (@what) {
- if ($w =~ m/=/) {
- # this is --enable MapType=MapName
- my ($type, $map) = split ('=', $w);
- enable_map($tc, $type, $map);
- } else {
- # this is --disable MapName
- disable_map($tc, $w);
- }
- }
- return save_updmap($tc);
-}
-
-sub enable_map {
- my ($tc, $type, $map) = @_;
-
- die "$prg: invalid mapType $type" if ($type !~ m/^(Map|MixedMap|KanjiMap)$/);
-
- if (defined($alldata->{'updmap'}{$tc}{'maps'}{$map})) {
- # the map data has already been read in, no special precautions necessary
- if (($alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} eq "enabled") &&
- ($alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} eq $type)) {
- # nothing to do here ... be happy!
- return;
- } else {
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "enabled";
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} = $type;
- $alldata->{'maps'}{$map}{'origin'} = $tc;
- $alldata->{'maps'}{$map}{'status'} = "enabled";
- $alldata->{'updmap'}{$tc}{'changed'} = 1;
- }
- } else {
- # add a new map file!
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} = $type;
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "enabled";
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'line'} = -1;
- $alldata->{'updmap'}{$tc}{'changed'} = 1;
- $alldata->{'maps'}{$map}{'origin'} = $tc;
- $alldata->{'maps'}{$map}{'status'} = "enabled";
- }
-}
-
-sub disable_map {
- my ($tc, $map) = @_;
-
- if (defined($alldata->{'updmap'}{$tc}{'maps'}{$map})) {
- # the map data has already been read in, no special precautions necessary
- if ($alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} eq "disabled") {
- # nothing to do here ... be happy!
- } else {
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "disabled";
- $alldata->{'maps'}{$map}{'origin'} = $tc;
- $alldata->{'maps'}{$map}{'status'} = "disabled";
- $alldata->{'updmap'}{$tc}{'changed'} = 1;
- }
- } else {
- # disable a Map type that might be activated in a lower ranked updmap.cfg
- if (!defined($alldata->{'maps'}{$map})) {
- warning("Map is not present anywhere, why should I disable it?\n");
- return;
- }
- my $orig = $alldata->{'maps'}{$map}{'origin'};
- # add a new entry to the top level where we disable it
- # copy over the type from the last entry
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'type'} =
- $alldata->{'updmap'}{$orig}{'maps'}{$map}{'type'};
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'status'} = "disabled";
- $alldata->{'updmap'}{$tc}{'maps'}{$map}{'line'} = -1;
- # rewrite the origin
- $alldata->{'maps'}{$map}{'origin'} = $tc;
- $alldata->{'maps'}{$map}{'status'} = "disabled";
- # go on for writing
- $alldata->{'updmap'}{$tc}{'changed'} = 1;
- }
-}
-
-
-# returns 1 if actually saved due to changes
-sub save_updmap {
- my $fn = shift;
- return if $opts{'dry-run'};
- my %upd = %{$alldata->{'updmap'}{$fn}};
- if ($upd{'changed'}) {
- mkdirhier(dirname($fn));
- open (FN, ">$fn") || die "$prg: can't write to $fn: $!";
- my @lines = @{$upd{'lines'}};
- if (!@lines) {
- print "Creating new config file $fn\n";
- # update lsR database
- $updLSR->{add}($fn);
- $updLSR->{exec}();
- # reset the LSR stuff, otherwise we add files several times
- $updLSR->{reset}();
- }
- # collect the lines with data
- my %line_to_setting;
- my %line_to_map;
- my @add_setting;
- my @add_map;
- if (defined($upd{'setting'})) {
- for my $k (keys %{$upd{'setting'}}) {
- if ($upd{'setting'}{$k}{'line'} == -1) {
- push @add_setting, $k;
- } else {
- $line_to_setting{$upd{'setting'}{$k}{'line'}} = $k;
- }
- }
- }
- if (defined($upd{'maps'})) {
- for my $k (keys %{$upd{'maps'}}) {
- if ($upd{'maps'}{$k}{'line'} == -1) {
- push @add_map, $k;
- } else {
- $line_to_map{$upd{'maps'}{$k}{'line'}} = $k;
- }
- }
- }
- for my $i (0..$#lines) {
- if (defined($line_to_setting{$i})) {
- my $k = $line_to_setting{$i};
- my $v = $upd{'setting'}{$k}{'val'};
- print FN "$k $v\n";
- } elsif (defined($line_to_map{$i})) {
- my $m = $line_to_map{$i};
- my $rm;
- if (defined($upd{'maps'}{$m}{'original'})) {
- # we have the case that @noEmbed@ was replaced by the respective
- # setting. Before writing out we have to replace this back with
- # the original line!A
- $rm = $upd{'maps'}{$m}{'original'};
- } else {
- $rm = $m;
- }
- my $t = $upd{'maps'}{$m}{'type'};
- my $p = ($upd{'maps'}{$m}{'status'} eq "disabled" ? "#! " : "");
- print FN "$p$t $rm\n";
- } else {
- print FN "$lines[$i]\n";
- }
- }
- # add the new settings and maps
- for my $k (@add_setting) {
- my $v = $upd{'setting'}{$k}{'val'};
- print FN "$k $v\n";
- }
- for my $m (@add_map) {
- my $t = $upd{'maps'}{$m}{'type'};
- my $p = ($upd{'maps'}{$m}{'status'} eq "disabled" ? "#! " : "");
- print FN "$p$t $m\n";
- }
- close(FN) || warn("Cannot close file handle for $fn: $!");
- delete $alldata->{'updmap'}{$fn}{'changed'};
- return 1;
- }
- return 0;
-}
-
-######################
-# check for correct option value
-#
-sub check_option {
- my ($opt, $val) = @_;
- if ((($settings{$opt}{'type'} eq "binary") &&
- $val ne "true" && $val ne "false") ||
- (($settings{$opt}{'type'} eq "string") &&
- !member($val, @{$settings{$opt}{'possible'}}))) {
- return 0;
- }
- return 1;
-}
-
-###############################################################################
-# setOption (conf_file, option, value)
-# sets option to value in the config file (replacing the existing setting
-# or by adding a new line to the config file).
-#
-sub setOption {
- my ($opt, $val) = @_;
-
- die "$prg: Unsupported option $opt." if (!defined($settings{$opt}));
- die "$0: Invalid value $val for option $opt."
- if (!check_option($opt, $val));
-
- # silently accept this old option name, just in case.
- return if $opt eq "dvipdfmDownloadBase14";
-
- #print "Setting option $opt to $val...\n" if !$opts{'quiet'};
- my $tc = $alldata->{'changes_config'};
-
- die "$prg: top config file $tc has not been read."
- if (!defined($alldata->{'updmap'}{$tc}));
-
- if (defined($alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'})) {
- # the value is already set, do nothing
- if ($alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'} eq $val) {
- return;
- }
- $alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'} = $val;
- $alldata->{'updmap'}{$tc}{'changed'} = 1;
- } else {
- $alldata->{'updmap'}{$tc}{'setting'}{$opt}{'val'} = $val;
- $alldata->{'updmap'}{$tc}{'setting'}{$opt}{'line'} = -1;
- $alldata->{'updmap'}{$tc}{'changed'} = 1;
- }
-}
-
-
-###############################################################################
-# copyFile()
-# copy file $src to $dst, sets $dst creation and mod time
-#
-sub copyFile {
- my ($src, $dst) = @_;
- my $dir;
- ($dir=$dst)=~s/(.*)\/.*/$1/;
- mkdirhier($dir);
-
- $src eq $dst && return "can't copy $src to itself!\n";
-
- open IN, "<$src" or die "$0: can't open source file $src for copying: $!";
- open OUT, ">$dst";
-
- binmode(IN);
- binmode(OUT);
- print OUT <IN>;
- close(OUT);
- close(IN);
- my @t = stat($src);
- utime($t[8], $t[9], $dst);
-}
-
-###############################################################################
-# files_are_identical(file_A, file_B)
-# compare two files. Same as cmp(1).
-#
-sub files_are_identical {
- my $file_A=shift;
- my $file_B=shift;
- my $retval=0;
-
- open IN, "$file_A";
- my $A=(<IN>);
- close IN;
- open IN, "$file_B";
- my $B=(<IN>);
- close IN;
-
- $retval=1 if ($A eq $B);
- return $retval;
-}
-
-###############################################################################
-# files_are_different(file_A, file_B[, comment_char])
-# compare two equalized files.
-#
-sub files_are_different {
- my $file_A=shift;
- my $file_B=shift;
- my $comment=shift;
- my $retval=0;
-
- my $A=equalize_file("$file_A", $comment);
- my $B=equalize_file("$file_B", $comment);
- $retval=1 unless ($A eq $B);
- return $retval;
-}
-
-###############################################################################
-# equalize_file(filename[, comment_char])
-# read a file and return its processed content as a string.
-# look into the source code for more details.
-#
-sub equalize_file {
- my $file=shift;
- my $comment=shift;
- my @temp;
-
- open IN, "$file";
- my @lines = (<IN>);
- close IN;
- chomp(@lines);
-
- for (@lines) {
- s/\s*${comment}.*// if (defined $comment); # remove comments
- next if /^\s*$/; # remove empty lines
- s/\s+/ /g; # replace multiple whitespace chars by a single one
- push @temp, $_;
- }
- return join('X', sort(@temp));
-}
-
-###############################################################################
-# normalizeLines()
-# not the original function, we want it to keep comments, that are
-# anyway only the file names we are adding!
-# whitespace is exactly one space, no empty lines,
-# no whitespace at end of line, one space before and after "
-#
-sub normalizeLines {
- my @lines = @_;
- my %count = ();
-
- # @lines = grep { $_ !~ m/^[*#;%]/ } @lines;
- map {$_ =~ s/\s+/ /gx } @lines;
- @lines = grep { $_ !~ m/^\s*$/x } @lines;
- map { $_ =~ s/\s$//x ;
- $_ =~ s/\s*\"\s*/ \" /gx;
- $_ =~ s/\" ([^\"]*) \"/\"$1\"/gx;
- } @lines;
-
- # @lines = grep {++$count{$_} < 2 } (sort @lines);
- @lines = grep {++$count{$_} < 2 } (@lines);
-
- return @lines;
-}
-
-
-#################################################################
-#
-# reading updmap-cfg files and the actual map files
-#
-# the following hash saves *all* the information and is passed around
-# we do not fill everything from the very beginning to make sure that
-# we only read what is necessary (speed!)
-#
-# initialized by main
-# $alldata->{'changes_config'} = the config file where changes are saved
-#
-# initialized by read_updmap_files
-# $alldata->{'order'} = [ list of updmap in decreasing priority ]
-# $alldata->{'updmap'}{$full_path_name_of_updmap}{'lines'} = \@lines
-# $alldata->{'updmap'}{$full_path_name_of_updmap}{'setting'}{$key}{'val'} = $val
-# $alldata->{'updmap'}{$full_path_name_of_updmap}{'setting'}{$key}{'line'} = $i
-# $alldata->{'updmap'}{$full_path_name_of_updmap}{'maps'}{$mapname}{'type'}
-# = 'Map'|'MixedMap'|'KanjiMap'|'disabled'
-# $alldata->{'updmap'}{$full_path_name_of_updmap}{'maps'}{$mapname}{'status'}
-# = 'enabled'|'disabled'
-# $alldata->{'updmap'}{$full_path_name_of_updmap}{'maps'}{$mapname}{'line'} = $i
-# $alldata->{'maps'}{$m}{'origin'} = $updmap_path_name
-# $alldata->{'maps'}{$m}{'status'} = enabled | disabled
-#
-# initialized by read_map_files
-# $alldata->{'maps'}{$m}{'fonts'}{$font} = $definition
-# $alldata->{'fonts'}{$f}{'origin'} = $map
-#
-# initialized by merge_data
-# $alldata->{'merged'}{'setting'}{$key}{'val'} = $val
-# $alldata->{'merged'}{'setting'}{$key}{'origin'} = $origin_updmap_cfg
-# $alldata->{'merged'}{'allMaps'}{'fonts'}{$fontdef} = $rest
-# $alldata->{'merged'}{'noMixedMaps'}{'fonts'}{$fontdef} = $rest
-# $alldata->{'merged'}{'KanjiMaps'}{'fonts'}{$fontdef} = $rest
-#
-
-sub read_updmap_files {
- my (@l) = @_;
- for my $l (@l) {
- my $updmap = read_updmap_file($l);
- $alldata->{'updmap'}{$l}{'lines'} = $updmap->{'lines'};
- if (defined($updmap->{'setting'})) {
- for my $k (keys %{$updmap->{'setting'}}) {
- $alldata->{'updmap'}{$l}{'setting'}{$k}{'val'} = $updmap->{'setting'}{$k}{'val'};
- $alldata->{'updmap'}{$l}{'setting'}{$k}{'line'} = $updmap->{'setting'}{$k}{'line'};
- }
- }
- if (defined($updmap->{'maps'})) {
- for my $k (keys %{$updmap->{'maps'}}) {
- $alldata->{'updmap'}{$l}{'maps'}{$k}{'type'} = $updmap->{'maps'}{$k}{'type'};
- $alldata->{'updmap'}{$l}{'maps'}{$k}{'status'} = $updmap->{'maps'}{$k}{'status'};
- $alldata->{'updmap'}{$l}{'maps'}{$k}{'line'} = $updmap->{'maps'}{$k}{'line'};
- }
- }
- }
- # in case the changes_config is a new one read it in and initialize it here
- my $cc = $alldata->{'changes_config'};
- if (! -r $cc) {
- $alldata->{'updmap'}{$cc}{'lines'} = [ ];
- }
- #
- $alldata->{'order'} = \@l;
-}
-
-sub merge_settings_replace_kanji {
- #
- my @l = @{$alldata->{'order'}};
- #
- # for security clean out everything that was there
- %{$alldata->{'merged'}} = ();
- #
- # first read in the settings
- # we read it in *reverse* order and simple fill up the combined data
- # thus if there are multiple definitions/settings, the one coming from
- # the first in the original list will win!
- for my $l (reverse @l) {
- # merge settings
- if (defined($alldata->{'updmap'}{$l}{'setting'})) {
- for my $k (keys %{$alldata->{'updmap'}{$l}{'setting'}}) {
- $alldata->{'merged'}{'setting'}{$k}{'val'} = $alldata->{'updmap'}{$l}{'setting'}{$k}{'val'};
- $alldata->{'merged'}{'setting'}{$k}{'origin'} = $l;
- }
- }
- }
- #
- my ($kanjiEmbed, $kanjiEmbed_origin) = get_cfg('kanjiEmbed');
- my ($kanjiVariant, $kanjiVariant_origin) = get_cfg('kanjiVariant');
- #
- # go through all map files and check that the text is properly replaced
- # after the replacement check that the generated map file actually
- # exists, we do NOT want to break in this case!
- #
- for my $l (@l) {
- for my $m (keys %{$alldata->{'updmap'}{$l}{'maps'}}) {
- if ($m =~ m/\@kanjiEmbed@/ || $m =~ m/\@kanjiVariant@/) {
- my $newm = $m;
- $newm =~ s/\@kanjiEmbed@/$kanjiEmbed/;
- $newm =~ s/\@kanjiVariant@/$kanjiVariant/;
- if (locateMap($newm)) {
- # now we have to update various linked items
- $alldata->{'updmap'}{$l}{'maps'}{$newm}{'type'} =
- $alldata->{'updmap'}{$l}{'maps'}{$m}{'type'};
- $alldata->{'updmap'}{$l}{'maps'}{$newm}{'status'} =
- $alldata->{'updmap'}{$l}{'maps'}{$m}{'status'};
- $alldata->{'updmap'}{$l}{'maps'}{$newm}{'line'} =
- $alldata->{'updmap'}{$l}{'maps'}{$m}{'line'};
- $alldata->{'updmap'}{$l}{'maps'}{$newm}{'original'} = $m;
- } else {
- print "$prg: generated map $newm (from $m) does not exists, not activating it!\n";
- }
- # in any case delete the @kanji...@ entry line, such a map will
- # never exist
- delete $alldata->{'updmap'}{$l}{'maps'}{$m};
- }
- }
- }
- #
- # first round determine which maps should be used and which type, as
- # different updmap.cfg files might specify different types of maps
- # (MixedMap or Map or KanjiMap).
- # Again, we have to do that in reverse order
- for my $l (reverse @l) {
- if (defined($alldata->{'updmap'}{$l}{'maps'})) {
- for my $m (keys %{$alldata->{'updmap'}{$l}{'maps'}}) {
- $alldata->{'maps'}{$m}{'origin'} = $l;
- $alldata->{'maps'}{$m}{'status'} = $alldata->{'updmap'}{$l}{'maps'}{$m}{'status'};
- }
- }
- }
-}
-
-sub read_updmap_file {
- my $fn = shift;
- my $is_old_local = ($fn =~ m/updmap-local.cfg/ ? 1 : 0);
- my %data;
- if (!open(FN,"<$fn")) {
- die ("Cannot read $fn: $!");
- }
- # we count lines from 0 ..!!!!
- my $i = -1;
- my @lines = <FN>;
- chomp(@lines);
- $data{'lines'} = [ @lines ];
- close(FN) || warn("Cannot close $fn: $!");
- for (@lines) {
- $i++;
- chomp;
- if ($is_old_local) {
- # in case we read an old updmap-local.cfg we have to make sure
- # that the disable lines
- # ^#!foo.map
- # are rewritten to proper disable lines
- # ^#! Map foo.map
- # we are guessing here the type of the map (namely Map)
- $_ =~ s/^#!([^ ])/#! Map $1/;
- }
- next if /^\s*$/;
- next if /^\s*#$/;
- next if /^\s*#[^!]/;
- next if /^\s*##/;
- next if /^#![^ ]/;
- # allow for commands on the line itself
- s/([^#].*)#.*$/$1/;
- my ($a, $b, @rest) = split ' ';
- # make sure we get empty strings as arguments
- $b = "" if (!defined($b));
- if ($a eq "#!") {
- if ($b eq "Map" || $b eq "MixedMap" || $b eq "KanjiMap") {
- my $c = shift @rest;
- if (!defined($c)) {
- warning("$prg: apparently not a real disable line, ignored: $_\n");
- } else {
- if (defined($data{'maps'}{$c})) {
- warning("$prg: double mention of $c in $fn\n");
- }
- $data{'maps'}{$c}{'status'} = 'disabled';
- $data{'maps'}{$c}{'type'} = $b;
- $data{'maps'}{$c}{'line'} = $i;
- }
- }
- next;
- }
- if (@rest) {
- warning("$prg: line $i in $fn contains a syntax error, more than two words!\n");
- }
- if (defined($settings{$a})) {
- if (check_option($a, $b)) {
- $data{'setting'}{$a}{'val'} = $b;
- $data{'setting'}{$a}{'line'} = $i;
- } else {
- warning("$prg: unknown setting for $a: $b, ignored!\n");
- }
- } elsif ($a eq "Map" || $a eq "MixedMap" || $a eq "KanjiMap") {
- if (defined($data{'maps'}{$b}) && $data{'maps'}{$b}{'type'} ne $a) {
- warning("$prg: double mention of $b with conflicting types in $fn\n");
- } else {
- $data{'maps'}{$b}{'type'} = $a;
- $data{'maps'}{$b}{'status'} = 'enabled';
- $data{'maps'}{$b}{'line'} = $i;
- }
- } else {
- warning("$prg: unrecognized line $i in $fn: $_\n");
- }
- }
- return \%data;
-}
-
-sub read_map_files {
- if (!defined($alldata->{'updmap'})) {
- return;
- }
- my @missing;
- my @l = @{$alldata->{'order'}};
- # first collect all the map files we are interested in
- # and determine whether they exist, and get their full path
- my @maps;
- for my $f (@l) {
- next if !defined($alldata->{'updmap'}{$f}{'maps'});
- for my $m (keys %{$alldata->{'updmap'}{$f}{'maps'}}) {
- # only read a map file if its final status is enabled!
- push @maps, $m if ($alldata->{'maps'}{$m}{'status'} eq 'enabled');
- }
- }
- for my $m (qw/dvips35.map pdftex35.map ps2pk35.map/) {
- push @maps, $m;
- $alldata->{'maps'}{$m}{'status'} = 'enabled';
- }
- @maps = sort_uniq(@maps);
- my @fullpath = `kpsewhich --format=map @maps`;
- chomp @fullpath;
- foreach my $map (@maps) {
- my ($ff) = grep /\/$map(\.map)?$/, @fullpath;
- if ($ff) {
- $alldata->{'maps'}{$map}{'fullpath'} = $ff;
- } else {
- # if the map file is not found, then push it onto the list of
- # missing map files, since we know that it is enabled
- push @missing, $map;
- }
- }
-
- #
- # read in the three basic fonts definition maps
- for my $m (qw/dvips35.map pdftex35.map ps2pk35.map/) {
- my $ret = read_map_file($alldata->{'maps'}{$m}{'fullpath'});
- my @ff = ();
- for my $font (keys %$ret) {
- $alldata->{'fonts'}{$font}{'origin'} = $m;
- $alldata->{'maps'}{$m}{'fonts'}{$font} = $ret->{$font};
- }
- }
- # we read the updmap in reverse directions, since we
- # replace the origin field of font definition always with the
- # top one
- for my $f (reverse @l) {
- my @maps = keys %{$alldata->{'updmap'}{$f}{'maps'}};
- for my $m (@maps) {
- # we do not read a map file multiple times, if $alldata{'maps'}{$m} is
- # defined we expect that it was read and do skip it
- next if defined($alldata->{'maps'}{$m}{'fonts'});
- # we do not read a map files content if it is disabled
- next if ($alldata->{'maps'}{$m}{'status'} eq 'disabled');
- if (!defined($alldata->{'maps'}{$m}{'fullpath'})) {
- # we have already pushed these map files onto the list of missing
- # map files, so do nothing here
- next;
- }
- my $ret = read_map_file($alldata->{'maps'}{$m}{'fullpath'});
- if (defined($ret)) {
- for my $font (keys %$ret) {
- if (defined($alldata->{'fonts'}{$font})) {
- # we got another definition, warn on that
- # if the origin is not defined by now, the font is defined
- # multiple times in the same map file, otherwise it is
- # defined in another map file already
- if (defined($alldata->{'fonts'}{$font}{'origin'})) {
- my $fontorig = $alldata->{'fonts'}{$font}{'origin'};
- my $maporig;
- if (($fontorig eq "ps2pk35.map") ||
- ($fontorig eq "pdftex35.map") ||
- ($fontorig eq "dvips35.map")) {
- $maporig = "built in map - both used - warning!";
- } else {
- $maporig = "from " . $alldata->{'maps'}{$fontorig}{'origin'};
- }
- warning("$prg: font $font is defined multiple times:\n");
- warning("$prg: $fontorig ($maporig)\n");
- warning("$prg: $m (from $f) (used)\n");
- } else {
- warning("$prg: font $font is multiply defined in $m, using an arbitrary instance!\n");
- }
- }
- $alldata->{'fonts'}{$font}{'origin'} = $m;
- $alldata->{'maps'}{$m}{'fonts'}{$font} = $ret->{$font};
- }
- }
- }
- }
- return (@missing);
-}
-
-sub read_map_file {
- my $fn = shift;
- my @lines;
- if (!open(MF,"<$fn")) {
- warn("cannot open $fn: $!");
- return;
- }
- @lines = <MF>;
- close(MF);
- chomp(@lines);
- my %data;
- for (@lines) {
- next if /^\s*#/;
- next if /^\s*%/;
- next if /^\s*$/;
- my ($a, $b) = split(' ', $_, 2);
- $data{$a} = $b;
- }
- return \%data;
-}
-
-#
-# merging the various font definitions
-#
-sub merge_data {
- my @l = @{$alldata->{'order'}};
- #
- # now merge the data
- #
- for my $m (keys %{$alldata->{'maps'}}) {
- my $origin = $alldata->{'maps'}{$m}{'origin'};
- next if !defined($origin);
- next if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'status'} eq "disabled");
- for my $f (keys %{$alldata->{'maps'}{$m}{'fonts'}}) {
- # use the font definition only for those fonts where the origin matches
- if ($alldata->{'fonts'}{$f}{'origin'} eq $m) {
- $alldata->{'merged'}{'allMaps'}{'fonts'}{$f} =
- $alldata->{'maps'}{$m}{'fonts'}{$f}
- if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} ne "KanjiMap");
- $alldata->{'merged'}{'noMixedMaps'}{'fonts'}{$f} =
- $alldata->{'maps'}{$m}{'fonts'}{$f}
- if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "Map");
- $alldata->{'merged'}{'KanjiMap'}{'fonts'}{$f} =
- $alldata->{'maps'}{$m}{'fonts'}{$f}
- if ($alldata->{'updmap'}{$origin}{'maps'}{$m}{'type'} eq "KanjiMap");
- }
- }
- }
-}
-
-
-#
-# $HOME and sudo and updmap-sys horror
-# some instances of sudo do not reset $HOME to the home of root
-# as an effect of "sudo updmap" creates root owned files in the home
-# of a normal user, and "sudo updmap-sys" uses map files and updmap.cfg
-# files from the directory of a normal user, but creating files
-# in TEXMFSYSCONFIG. This is *all* wrong.
-# we check: if we are running as UID 0 (root) on Unix and the
-# ENV{HOME} is NOT the same as the one of root, then give a warning
-# and reset it to the real home dir of root.
-
-sub reset_root_home {
- if (!win32() && ($> == 0)) { # $> is effective uid
- my $envhome = $ENV{'HOME'};
- # if $HOME isn't an existing directory, we don't care.
- if (defined($envhome) && (-d $envhome)) {
- # we want to avoid calling getpwuid as far as possible, so if
- # $envhome is one of some usual values we accept it without worrying.
- if ($envhome =~ m,^(/|/root|/var/root)/*$,) {
- return;
- }
- # $HOME is defined, check what is the home of root in reality
- my (undef,undef,undef,undef,undef,undef,undef,$roothome) = getpwuid(0);
- if (defined($roothome)) {
- if ($envhome ne $roothome) {
- warning("$prg: resetting \$HOME value (was $envhome) to root's "
- . "actual home ($roothome).\n");
- $ENV{'HOME'} = $roothome;
- } else {
- # envhome and roothome do agree, nothing to do, that is the good case
- }
- } else {
- warning("$prg: home of root not defined, strange!\n");
- }
- }
- }
-}
-
-sub warning {
- print STDERR @_;
-}
-
-#
-# help, version etc etc
-#
-
-sub version {
- my $ret = sprintf "%s (TeX Live, multi) version %s\n", $prg, $version;
- return $ret;
-}
-
-sub help {
- my $usage = <<"EOF";
-Usage: $prg [OPTION] ... [COMMAND]
- or: $prg-sys [OPTION] ... [COMMAND]
-
-Update the default font map files used by pdftex, dvips, and dvipdfm(x),
-and optionally pxdvi, as determined by all configuration files updmap.cfg
-(the ones returned by running "kpsewhich --all updmap.cfg", but see below).
-
-Among other things, these map files are used to determine which fonts
-should be used as bitmaps and which as outlines, and to determine which
-font files are included in the PDF or PostScript output.
-
-By default, the TeX filename database (ls-R) is also updated.
-
-Options:
- --cnffile FILE read FILE for the updmap configuration
- (can be given multiple times, in which case
- all the files are used)
- --dvipdfmxoutputdir DIR specify output directory (dvipdfm(x) syntax)
- --dvipsoutputdir DIR specify output directory (dvips syntax)
- --pdftexoutputdir DIR specify output directory (pdftex syntax)
- --pxdvioutputdir DIR specify output directory (pxdvi syntax)
- --outputdir DIR specify output directory (for all files)
- --copy cp generic files rather than using symlinks
- --force recreate files even if config hasn't changed
- --nomkmap do not recreate map files
- --nohash do not run texhash
- -n, --dry-run only show the configuration, no output
- --quiet, --silent reduce verbosity
-
-Commands:
- --help show this message and exit
- --version show version information and exit
- --showoption OPTION show the current setting of OPTION
- --showoptions OPTION show possible settings for OPTION
- --setoption OPTION VALUE set OPTION to value; option names below
- --setoption OPTION=VALUE as above, just different syntax
- --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg,
- where MAPTYPE is Map, MixedMap, or KanjiMap
- --enable Map=MAPFILE add \"Map MAPFILE\" to updmap.cfg
- --enable MixedMap=MAPFILE add \"MixedMap MAPFILE\" to updmap.cfg
- --enable KanjiMap=MAPFILE add \"KanjiMap MAPFILE\" to updmap.cfg
- --disable MAPFILE disable MAPFILE, of whatever type
- --listmaps list all active and inactive maps
- --listavailablemaps same as --listmaps, but without
- unavailable map files
- --syncwithtrees disable unavailable map files in updmap.cfg
-
-Explanation of the map types: the (only) difference between Map and
-MixedMap is that MixedMap entries are not added to psfonts_pk.map.
-The purpose is to help users with devices that render Type 1 outline
-fonts worse than mode-tuned Type 1 bitmap fonts. So, MixedMap is used
-for fonts that are available as both Type 1 and Metafont.
-KanjiMap entries are added to psfonts_t1.map and kanjix.map.
-
-Explanation of the OPTION names for --showoptions, --showoption, --setoption:
-
- dvipsPreferOutline true|false (default true)
- Whether dvips uses bitmaps or outlines, when both are available.
- dvipsDownloadBase35 true|false (default true)
- Whether dvips includes the standard 35 PostScript fonts in its output.
- pdftexDownloadBase14 true|false (default true)
- Whether pdftex includes the standard 14 PDF fonts in its output.
- pxdviUse true|false (default false)
- Whether maps for pxdvi (Japanese-patched xdvi) are under updmap's control.
- kanjiEmbed (any string)
- kanjiVariant (any string)
- See below.
- LW35 URWkb|URW|ADOBEkb|ADOBE (default URWkb)
- Adapt the font and file names of the standard 35 PostScript fonts.
- URWkb URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb)
- URW URW fonts with "vendor" filenames (e.g. n019064l.pfb)
- ADOBEkb Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb)
- ADOBE Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb)
-
- These options are only read and acted on by updmap; dvips, pdftex, etc.,
- do not know anything about them. They work by changing the default map
- file which the programs read, so they can be overridden by specifying
- command-line options or configuration files to the programs, as
- explained at the beginning of updmap.cfg.
-
- The options kanjiEmbed and kanjiVariant specify special replacements
- in the map lines. If a map contains the string \@kanjiEmbed\@, then
- this will be replaced by the value of that option; similarly for
- kanjiVariant. In this way, users of Japanese TeX can select different
- fonts to be included in the final output.
-
-Explanation of trees and files normally used:
-
- If --cnffile is specified on the command line (possibly multiple
- times), its value(s) are used. Otherwise, updmap reads all the
- updmap.cfg files found by running \`kpsewhich -all updmap.cfg', in the
- order returned by kpsewhich, with one exception: an updmap.cfg found
- in TEXMFLOCAL is given higher priority than the updmap.cfg in
- TEXMFMAIN, to ensure that local adjustments by administrators take
- precedence over what is shipped in TeX Live.
-
- In any case, if multiple updmap.cfg files are found, all the maps
- mentioned in all the updmap.cfg files are merged.
-
- Thus, if updmap.cfg files are present in all trees, and the default
- layout is used as shipped with TeX Live, the following files are
- read, in the given order.
-
- For updmap-sys:
- TEXMFSYSCONFIG \$TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg
- TEXMFSYSVAR \$TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg
- TEXMFLOCAL \$TEXLIVE/texmf-local/web2c/updmap.cfg
- TEXMFMAIN \$TEXLIVE/YYYY/texmf/web2c/updmap.cfg
- TEXMFDIST \$TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg
-
- For updmap:
- TEXMFCONFIG \$HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg
- TEXMFVAR \$HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg
- TEXMFHOME \$HOME/texmf/web2c/updmap.cfg
- TEXMFSYSCONFIG \$TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg
- TEXMFSYSVAR \$TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg
- TEXMFLOCAL \$TEXLIVE/texmf-local/web2c/updmap.cfg
- TEXMFMAIN \$TEXLIVE/YYYY/texmf/web2c/updmap.cfg
- TEXMFDIST \$TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg
-
- (where YYYY is the TeX Live release version).
-
- There is another exception to keep upgradability from earlier versions
- of TeX Live: if a file TEXMFLOCAL/web2c/updmap-local.cfg exists
- (formerly used by tlmgr to merge local fonts), then the file
- TEXMFLOCAL/web2c/updmap.cfg is ignored (if it exists) and that
- updmap-local.cfg is used instead. In this case, updmap recognizes the
- previous syntax for disabling map files in updmap-local.cfg (this
- syntax is different from what is used now).
-
- According to the actions, updmap might write to one of the given files
- or create a new updmap.cfg, described further below.
-
- Where changes are saved: if config files are given on the command
- line, then the first one given will be used to save any changes from
- --setoption, --enable or --disable. If the config files are taken
- from kpsewhich output, then the algorithm is more complex:
-
- 1) If \$TEXMFCONFIG/web2c/updmap.cfg or \$TEXMFHOME/web2c/updmap.cfg
- appears in the list of used files, then the one listed first by
- kpsewhich --all (equivalently, the one returned by kpsewhich
- updmap.cfg), is used.
-
- 2) If neither of the above two are present and changes are made, a
- new config file is created in \$TEXMFCONFIG/web2c/updmap.cfg.
-
- Resolving multiple definitions of a font:
- If a font is defined in more than one map file, then the definition
- coming from the first-listed updmap.cfg is used. If a font is
- defined multiple times within the same map file, one is chosen
- arbitrarily. In both cases a warning is issued.
-
- Disabling maps:
- updmap.cfg files with higher priority (listed earlier) can disable
- maps mentioned in lower priority (listed later) updmap.cfg files by
- writing, e.g.,
- \#! Map mapname.map
- or
- \#! MixedMap mapname.map
- in the higher-priority updmap.cfg file.
-
- As an example, suppose you have a copy of MathTime Pro fonts
- and want to disable the Belleek version of the fonts; that is,
- disable the map belleek.map. You can create the file
- \$TEXMFCONFIG/web2c/updmap.cfg with the content
- #! Map belleek.map
- Map mt-plus.map
- Map mt-yy.map
- and call $prg.
-
- updmap writes the map files for dvips (psfonts.map) and pdftex
- (pdftex.map) to the TEXMFVAR/fonts/map/updmap/{dvips,pdftex}/
- directories.
-
- The log file is written to TEXMFVAR/web2c/updmap.log.
-
- When updmap-sys is run, TEXMFSYSCONFIG and TEXMFSYSVAR are used
- instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the only
- difference between updmap-sys and updmap.
-
- Other locations may be used if you give them on the command line, or
- these trees don't exist, or you are not using the original TeX Live.
-
- To see the precise locations of the various files that
- will be read and written, give the -n option (or read the source).
-
-For step-by-step instructions on making new fonts known to TeX, read
-http://tug.org/fonts/fontinstall.html. For even more terse
-instructions, read the beginning of updmap.cfg.
-
-Report bugs to: tex-k\@tug.org
-TeX Live home page: <http://tug.org/texlive/>
-EOF
-;
- print &version();
- print $usage;
- exit 0;
-}
-
-### Local Variables:
-### perl-indent-level: 2
-### tab-width: 2
-### indent-tabs-mode: nil
-### End:
-# vim:set tabstop=2 expandtab: #
diff --git a/Master/texmf-dist/doc/generic/musixtex/ChangeLog b/Master/texmf-dist/doc/generic/musixtex/ChangeLog
deleted file mode 100644
index 7d588009ee2..00000000000
--- a/Master/texmf-dist/doc/generic/musixtex/ChangeLog
+++ /dev/null
@@ -1,25 +0,0 @@
-2011-10-23 All font-related files moved to a new package musixtex-fonts,
- which obsoletes musixtex-t1fonts.
-2011-06-27 Small revisions to the README. Moved the scripts documentation
- to doc/generic/musixtex/scripts
-2011-05-21 Augmented the musixtex.lua script to allow multiple filenames,
- and added -l (latex) and -f (default) options.
-2011-04-25 Rainer Dunker patch to curly.tex; Mthimkhulu Molekwa e-mail updated;
- added options to musixtex.lua
-2011-04-19 replaced musixflx.c by musixflx.lua and musixtex.sh by musixtex.lua
-2011-04-04 added musixtex scripts to run etex && musixflx && etex && dvips && ps2pdf
-2011-04-03 updated musixtex.tex to version 1.15 (T-115)
-2010-12-18 "universal" OS-X binary for musixflx
-2010-11-28 added Joel Hunsberger as an author of musixflx.c
-2010-11-10 added font-map configuration to musixtex-install;
- updated mail-list info
-2010-11-07 moved musixcrd.tex from doc to tex
-2010-11-05 psslurs re-licensed to GPL
-2010-11-02 musixcrd source files added
-2010-11-01 underbracket.sty etc. moved to doc
-2010-10-26 added tests and improved the error message for
- version-incompatibility in musixflx
-2010-10-18 first version of musixflx-0.83.2
-2010-09-28 type 1 font for mxsk added to psfonts and musix.map
-2010-09-27 musixflx.c GPLed
-
diff --git a/Master/texmf-dist/doc/generic/musixtex/README b/Master/texmf-dist/doc/generic/musixtex/README
index b319fd5f376..99e92a5308a 100644
--- a/Master/texmf-dist/doc/generic/musixtex/README
+++ b/Master/texmf-dist/doc/generic/musixtex/README
@@ -1,4 +1,4 @@
-This is MusiXTeX, version 1.15 (packaged 2011-10-23). MusiXTeX is a
+This is MusiXTeX, version 1.15 (packaged 2013-01-21). MusiXTeX is a
TeX-based system for typesetting music.
The main author was Daniel Taupin, who died in a climbing accident in
@@ -8,10 +8,7 @@ and Ross Mitchell. MusiXTeX is now being maintained by
Don Simons dsimons(at)roadrunner(dot)com
Hiroaki Morimoto CQX05646(at)nifty(dot)com
-The package consists of
-
-musixtex-texmf.zip, which contains macros, documentation and
-support files, including
+The package includes
+ Postscript slur support, due to Stanislav Kneifl
@@ -30,19 +27,20 @@ support files, including
+ wrapper scripts musixflx.bat and musixtex.bat for use on Windows
-MusiXTeX fonts, including both the original metafont sources and Type 1
-versions by Takanori Uchiyama are in a separate musixtex-fonts package,
-which must be installed before using the MusiXTeX macros.
+MusiXTeX fonts, including both the original metafont sources and Type
+1 versions by Takanori Uchiyama are in a separate musixtex-fonts
+package, which must be installed before using the MusiXTeX macros.
musixtex-install.{pdf,tex} is a more-detailed version of the following
instructions:
To install (on TDS-compliant TeX systems):
- + unzip musixtex-texmf.zip at the root of a texmf tree and, if
- necessary, update the filename database; e.g., texhash texmf.
+ + unzip tex-archive/install/macros/musixtex.tds.zip at the root of a
+ texmf tree and, if necessary, update the filename database;
+ e.g., texhash texmf.
- + on Windows: move the scripts in scripts\musixtex\Windows to a folder
+ + on Windows: move the scripts in Windows to a folder
on the executable PATH (or add that folder to the PATH)
+ on any Unix-like system: install symbolic links musixflx
diff --git a/Master/texmf-dist/doc/generic/musixtex/addons/README.underbracket b/Master/texmf-dist/doc/generic/musixtex/addons/README.underbracket
new file mode 100644
index 00000000000..4345cb63fdc
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/musixtex/addons/README.underbracket
@@ -0,0 +1,64 @@
+LaTeX package underbracket
+
+draws brackets to underline (song) text
+
+v1.2 by Bernd Jantzen
+For e-mail contact please use "ctan" before the "@"-sign
+and "bernd-jantzen.de" after it to form my address
+(not given in full clear text here to prevent spam).
+
+This package draws brackets to underline text (especially,
+but not exclusively, syllables of song text).
+It may be combined with musixtex/musixlyr, within the argument of
+the \setlyrics command or outside the music score.
+It provides several macros to define brackets which may e.g. start
+and end centered below syllables.
+Three length variables are provided to allow a fine adjustment
+of the bracket parameters.
+
+This material is subject to the LaTeX Project Public License.
+See http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html
+for the details of that license.
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Commands:
+
+\underbracket{TEXT}
+ draws a bracket underlining TEXT
+ the bracket starts below the left end of TEXT
+ and stops below the right end of TEXT
+
+\Underbracket{TEXT}
+ like \underbracket, but reserves no vertical space below the text
+
+\cunderbracket{LEFT}{TEXT}{RIGHT}
+ draws a bracket underlining LEFTTEXTRIGHT
+ the bracket starts centered below LEFT and stops centered below RIGHT
+
+\cUnderbracket{LEFT}{TEXT}{RIGHT}
+ like cunderbracket, but reserves no vertical space below the text
+
+
+The commands \[c]underbracket do well in normal text which is aligned
+according to the baseline. The vertical space reserved below the text
+guarantees the distance to the next line.
+The commands \[c]Underbracket do well within the \setlyrics command of
+musixlyr where the text is vertically centered between the staves. Vertical
+space reserved below the text would shift the whole text upwards here.
+
+
+Adjustable length parameters:
+(change e.g. with \setlength{\underbracketheight}{4pt})
+
+\underbracketwidth (default 0.3pt):
+ linewidth of the bracket
+
+\underbracketheight (default 3pt):
+ height of the bracket (length of the vertical lines)
+
+\underbracketsep (default 2pt):
+ vertical distance between the lowest part of the text
+ and the upper end of the bracket;
+ also minimal vertical distance below the bracket
+
diff --git a/Master/texmf-dist/doc/generic/musixtex/gpl.txt b/Master/texmf-dist/doc/generic/musixtex/gpl.txt
deleted file mode 100644
index 8de98afaaf9..00000000000
--- a/Master/texmf-dist/doc/generic/musixtex/gpl.txt
+++ /dev/null
@@ -1,251 +0,0 @@
-
- GNU GENERAL PUBLIC LICENSE
- Version 1, February 1989
-
- Copyright (C) 1989 Free Software Foundation, Inc.
- 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The license agreements of most software companies try to keep users
-at the mercy of those companies. By contrast, our General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. The
-General Public License applies to the Free Software Foundation's
-software and to any other program whose authors commit to using it.
-You can use it for your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Specifically, the General Public License is designed to make
-sure that you have the freedom to give away or sell copies of free
-software, that you receive source code or can get it if you want it,
-that you can change the software or use pieces of it in new free
-programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of a such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must tell them their rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License Agreement applies to any program or other work which
-contains a notice placed by the copyright holder saying it may be
-distributed under the terms of this General Public License. The
-"Program", below, refers to any such program or work, and a "work based
-on the Program" means either the Program or any work containing the
-Program or a portion of it, either verbatim or with modifications. Each
-licensee is addressed as "you".
-
- 1. You may copy and distribute verbatim copies of the Program's source
-code as you receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice and
-disclaimer of warranty; keep intact all the notices that refer to this
-General Public License and to the absence of any warranty; and give any
-other recipients of the Program a copy of this General Public License
-along with the Program. You may charge a fee for the physical act of
-transferring a copy.
-
- 2. You may modify your copy or copies of the Program or any portion of
-it, and copy and distribute such modifications under the terms of Paragraph
-1 above, provided that you also do the following:
-
- a) cause the modified files to carry prominent notices stating that
- you changed the files and the date of any change; and
-
- b) cause the whole of any work that you distribute or publish, that
- in whole or in part contains the Program or any part thereof, either
- with or without modifications, to be licensed at no charge to all
- third parties under the terms of this General Public License (except
- that you may choose to grant warranty protection to some or all
- third parties, at your option).
-
- c) If the modified program normally reads commands interactively when
- run, you must cause it, when started running for such interactive use
- in the simplest and most usual way, to print or display an
- announcement including an appropriate copyright notice and a notice
- that there is no warranty (or else, saying that you provide a
- warranty) and that users may redistribute the program under these
- conditions, and telling the user how to view a copy of this General
- Public License.
-
- d) You may charge a fee for the physical act of transferring a
- copy, and you may at your option offer warranty protection in
- exchange for a fee.
-
-Mere aggregation of another independent work with the Program (or its
-derivative) on a volume of a storage or distribution medium does not bring
-the other work under the scope of these terms.
-
- 3. You may copy and distribute the Program (or a portion or derivative of
-it, under Paragraph 2) in object code or executable form under the terms of
-Paragraphs 1 and 2 above provided that you also do one of the following:
-
- a) accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of
- Paragraphs 1 and 2 above; or,
-
- b) accompany it with a written offer, valid for at least three
- years, to give any third party free (except for a nominal charge
- for the cost of distribution) a complete machine-readable copy of the
- corresponding source code, to be distributed under the terms of
- Paragraphs 1 and 2 above; or,
-
- c) accompany it with the information you received as to where the
- corresponding source code may be obtained. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form alone.)
-
-Source code for a work means the preferred form of the work for making
-modifications to it. For an executable file, complete source code means
-all the source code for all modules it contains; but, as a special
-exception, it need not include source code for modules which are standard
-libraries that accompany the operating system on which the executable
-file runs, or for standard header files or definitions files that
-accompany that operating system.
-
- 4. You may not copy, modify, sublicense, distribute or transfer the
-Program except as expressly provided under this General Public License.
-Any attempt otherwise to copy, modify, sublicense, distribute or transfer
-the Program is void, and will automatically terminate your rights to use
-the Program under this License. However, parties who have received
-copies, or rights to use copies, from you under this General Public
-License will not have their licenses terminated so long as such parties
-remain in full compliance.
-
- 5. By copying, distributing or modifying the Program (or any work based
-on the Program) you indicate your acceptance of this license to do so,
-and all its terms and conditions.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the original
-licensor to copy, distribute or modify the Program subject to these
-terms and conditions. You may not impose any further restrictions on the
-recipients' exercise of the rights granted herein.
-
- 7. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of the license which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-the license, you may choose any version ever published by the Free Software
-Foundation.
-
- 8. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- Appendix: How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to humanity, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these
-terms.
-
- To do so, attach the following notices to the program. It is safest to
-attach them to the start of each source file to most effectively convey
-the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) 19yy <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 1, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) 19xx name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the
-appropriate parts of the General Public License. Of course, the
-commands you use may be called something other than `show w' and `show
-c'; they could even be mouse-clicks or menu items--whatever suits your
-program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the
- program `Gnomovision' (a program to direct compilers to make passes
- at assemblers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-That's all there is to it!
diff --git a/Master/texmf-dist/doc/generic/musixtex/musixtex-install.pdf b/Master/texmf-dist/doc/generic/musixtex/musixtex-install.pdf
index 08fc01aae49..a1cdd54d1e6 100644
--- a/Master/texmf-dist/doc/generic/musixtex/musixtex-install.pdf
+++ b/Master/texmf-dist/doc/generic/musixtex/musixtex-install.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/generic/musixtex/musixtex-install.tex b/Master/texmf-dist/doc/generic/musixtex/musixtex-install.tex
index 2375565aa5c..d962dbdfe3d 100644
--- a/Master/texmf-dist/doc/generic/musixtex/musixtex-install.tex
+++ b/Master/texmf-dist/doc/generic/musixtex/musixtex-install.tex
@@ -32,12 +32,14 @@ which tree to use\footnote{%
and installing files\footnote{%
\myurl{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=inst-wlcf}}.
-\section{Installing \texttt{musixtex-texmf.zip}}
+\section{Installing \texttt{musixtex.tds.zip}}
In this distribution of MusiXTeX, most of the files to be installed
-(including macros, scripts, and documentation) are in
-\texttt{musixtex-texmf.zip}, a zipped TEXMF
-hierarchy. Simply unzip this archive in the root folder/directory of whichever TEXMF tree
+(including macros, scripts, and documentation) are in a zipped TEXMF hierarchy
+\begin{list}{}{}\item
+\texttt{tex-archive/install/macros/musixtex.tds.zip}
+\end{list}
+at CTAN. Simply download and unzip this archive in the root folder/directory of whichever TEXMF tree
you decide is most appropriate, likely a ``local'' or ``personal'' one.
This should work with any TDS\footnote{%
\myurl{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tds}}
@@ -75,11 +77,11 @@ symbolic link to \texttt{musixflx.lua} in any directory on the executable PATH a
On Windows, you can \emph{either}
copy the batch file
\begin{list}{}{}
-\item \verb|...\scripts\musixtex\Windows\musixflx.bat|
+\item \verb|Windows\musixflx.bat|
\end{list}
to a folder
on the executable PATH \emph{or} add the folder
-\verb|...\scripts\musixtex\Windows| to the executable PATH
+\verb|Windows| to the executable PATH
as follows:
in ``My Computer''
click on
@@ -87,7 +89,7 @@ click on
View System Information\quad$\rightarrow$\quad Advanced\quad$\rightarrow$\quad Environment Variables
\end{center}
scroll
-down to ``path'', select it, click edit, and add the path to \verb|...\scripts\musixtex\Windows| after a semi-colon.
+down to ``path'', select it, click edit, and add the path to \verb|Windows| after a semi-colon.
Documentation for \verb\musixflx\ is in the \verb\doc/generic/musixtex/scripts\ directory.
\section{Installing \texttt{musixtex}}
diff --git a/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.1 b/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.1
deleted file mode 100644
index a3c214535e2..00000000000
--- a/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.1
+++ /dev/null
@@ -1,43 +0,0 @@
-.\" This manpage is licensed under the GNU Public License
-.TH MUSIXFLX 1 2011-04-21 "musixflx-0.83.3lua7" ""
-
-.SH NAME
-musixflx \- process mx1 files (the second pass of 3-pass MusiXTeX typesetting)
-
-.SH SYNOPSIS
-[ texlua ]
-.B musixflx[.lua]
-.I jobname
-[ .mx1 | .tex ]
-[
-.I debugmode
-]
-
-where
-.I debugmode
-can be
-.br
- d output debugging information to the screen
-.br
- m output line numbers to the screen
-.br
- f output debugging information to jobname.mxl (not mx1)
-.br
- s output computed lines to the screen
-
-To allow for ease of use with a batch file, \fB musixflx.lua\fR
-can be fed with either \fI jobname.mx1\fP, \fI jobname.tex\fP,
-or just \fI jobname\fP, any of which open \fI jobname.mx1\fP
-and create \fI jobname.mx2\fP.
-
-.SH SEE ALSO
-.BR musixtex (1)
-.br
-musixdoc.pdf
-
-.SH AUTHOR
-This manual page was written by Andreas Tille
-<tille@debian.org> for the Debian GNU/Linux system (but may be used
-by others). Corrections to the synopsis were pointed out by Peter
-Breitenlohner <peb@mppmu.mpg.de> and implemented by Bob Tennent
-<rdt@cs.queensu.ca>.
diff --git a/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.html b/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.html
new file mode 100644
index 00000000000..6d7c8612268
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.html
@@ -0,0 +1,84 @@
+Content-type: text/html
+
+<HTML><HEAD><TITLE>Manpage of MUSIXFLX</TITLE>
+</HEAD><BODY>
+<H1>MUSIXFLX</H1>
+Section: (1)<BR>Updated: 2011-04-21<BR><A HREF="#index">Index</A>
+<A HREF="http://localhost/cgi-bin/man/man2html">Return to Main Contents</A><HR>
+
+<P>
+<A NAME="lbAB">&nbsp;</A>
+<H2>NAME</H2>
+
+musixflx - process mx1 files (the second pass of 3-pass MusiXTeX typesetting)
+<P>
+<A NAME="lbAC">&nbsp;</A>
+<H2>SYNOPSIS</H2>
+
+[ texlua ]
+<B>musixflx[.lua]</B>
+
+<I>jobname </I>
+
+[ .mx1 | .tex ]
+[
+<I>debugmode </I>
+
+]
+<P>
+where
+<I>debugmode </I>
+
+can be
+<BR>
+
+<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>d<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>output debugging information to the screen<BR>
+<BR>
+
+<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>m<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>output line numbers to the screen<BR>
+<BR>
+
+<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>f<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>output debugging information to jobname.mxl (not mx1)<BR>
+<BR>
+
+<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>s<TT>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</TT>output computed lines to the screen<BR>
+<P>
+To allow for ease of use with a batch file, <B> musixflx.lua</B>
+can be fed with either <I> jobname.mx1</I>, <I> jobname.tex</I>,
+or just <I> jobname</I>, any of which open <I> jobname.mx1</I>
+and create <I> jobname.mx2</I>.
+<P>
+<A NAME="lbAD">&nbsp;</A>
+<H2>SEE ALSO</H2>
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+musixtex">musixtex</A></B>(1)
+
+<BR>
+
+musixdoc.pdf
+<P>
+<A NAME="lbAE">&nbsp;</A>
+<H2>AUTHOR </H2>
+
+This manual page was written by Andreas Tille
+&lt;<A HREF="mailto:tille@debian.org">tille@debian.org</A>&gt; for the Debian GNU/Linux system (but may be used
+by others). Corrections to the synopsis were pointed out by Peter
+Breitenlohner &lt;<A HREF="mailto:peb@mppmu.mpg.de">peb@mppmu.mpg.de</A>&gt; and implemented by Bob Tennent
+&lt;<A HREF="mailto:rdt@cs.queensu.ca">rdt@cs.queensu.ca</A>&gt;.
+<P>
+
+<HR>
+<A NAME="index">&nbsp;</A><H2>Index</H2>
+<DL>
+<DT><A HREF="#lbAB">NAME</A><DD>
+<DT><A HREF="#lbAC">SYNOPSIS</A><DD>
+<DT><A HREF="#lbAD">SEE ALSO</A><DD>
+<DT><A HREF="#lbAE">AUTHOR </A><DD>
+</DL>
+<HR>
+This document was created by
+<A HREF="http://localhost/cgi-bin/man/man2html">man2html</A>,
+using the manual pages.<BR>
+Time: 08:30:52 GMT, September 14, 2012
+</BODY>
+</HTML>
diff --git a/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.pdf b/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.pdf
deleted file mode 100644
index 1052dbf8342..00000000000
--- a/Master/texmf-dist/doc/generic/musixtex/scripts/musixflx.pdf
+++ /dev/null
Binary files differ
diff --git a/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.1 b/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.1
deleted file mode 100644
index c8460885b4a..00000000000
--- a/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.1
+++ /dev/null
@@ -1,88 +0,0 @@
-.\" This manpage is licensed under the GNU Public License
-.TH MUSIXTEX 1 2011-05-21 "musixtex version 0.4" ""
-
-.SH NAME
-musixtex \- processes MusiXTeX files, deleting intermediate files
-
-.SH SYNOPSIS
-[ texlua ]
-.B musixtex[.lua]
-{
-.IR option
-|
-.IR jobname
-[ .tex ]
-} ...
-.TP
-The default effect is to process each file using
-.TP 12
-.BR etex (1)
-(first pass)
-.TP
-.BR musixflx (1)
-(second pass)
-.TP
-.BR etex (1)
-(third pass)
-.TP
-.BR dvips (1)
-(dvi to Postscript)
-.TP
-.BR ps2pdf (1)
-(Postscript to Portable Document Format)
-.TP
-followed by removal of intermediate files.
-
-.SH OPTIONS
-.TP 8
-.B -v
-output program name and version number, and quit
-.TP
-.B -h
-output usage summary and quit
-.TP
-.B -l
-changes the TeX processor to
-.BR latex (1)
-or
-.BR pdflatex (1)
-.TP
-.B -p
-changes the TeX processor to
-.BR pdfetex (1)
-or
-.BR pdflatex (1)
-(and doesn't run
-.BR dvips (1)
-and
-.BR ps2pdf (1)
-or
-.BR dvipdfm (1)
-)
-.TP
-.B -d
-changes the dvi processor to
-.BR dvipdfm (1)
-.TP
-.B -s
-stops processing at the dvi file
-.TP
-.B -f
-default processing
-.TP 0
-Options affect processing of all succeeding MusiXTeX files unless changed by another option.
-
-.SH SEE ALSO
-.BR etex (1),
-.BR latex (1),
-.BR pdfetex (1),
-.BR pdflatex (1),
-.BR musixflx (1),
-.BR dvipdfm (1),
-.BR dvips (1),
-.BR ps2pdf (1).
-.br
-musixdoc.pdf
-
-.SH AUTHOR
-This manual page was written by Bob Tennent <rdt@cs.queensu.ca>.
diff --git a/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.html b/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.html
new file mode 100644
index 00000000000..fca335c0ee7
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.html
@@ -0,0 +1,163 @@
+Content-type: text/html
+
+<HTML><HEAD><TITLE>Manpage of MUSIXTEX</TITLE>
+</HEAD><BODY>
+<H1>MUSIXTEX</H1>
+Section: (1)<BR>Updated: 2012-09-14<BR><A HREF="#index">Index</A>
+<A HREF="http://localhost/cgi-bin/man/man2html">Return to Main Contents</A><HR>
+
+<P>
+<A NAME="lbAB">&nbsp;</A>
+<H2>NAME</H2>
+
+musixtex - processes MusiXTeX files, deleting intermediate files
+<P>
+<A NAME="lbAC">&nbsp;</A>
+<H2>SYNOPSIS</H2>
+
+[ texlua ]
+<B>musixtex[.lua]</B>
+
+{
+<I>option</I>
+
+|
+<I>jobname</I>
+
+[ .tex ]
+} ...
+<DL COMPACT>
+<DT>The default effect is to process each file using <DD>
+<DT><B><A HREF="http://localhost/cgi-bin/man/man2html?1+etex">etex</A></B>(1)
+
+<DD>
+(first pass)
+<DT><B><A HREF="http://localhost/cgi-bin/man/man2html?1+musixflx">musixflx</A></B>(1)
+
+<DD>
+(second pass)
+<DT><B><A HREF="http://localhost/cgi-bin/man/man2html?1+etex">etex</A></B>(1)
+
+<DD>
+(third pass)
+<DT><B><A HREF="http://localhost/cgi-bin/man/man2html?1+dvips">dvips</A></B>(1)
+
+<DD>
+(dvi to Postscript)
+<DT><B><A HREF="http://localhost/cgi-bin/man/man2html?1+ps2pdf">ps2pdf</A></B>(1)
+
+<DD>
+(Postscript to Portable Document Format)
+<DT>followed by removal of intermediate files.<DD>
+<P>
+</DL>
+<A NAME="lbAD">&nbsp;</A>
+<H2>OPTIONS</H2>
+
+<DL COMPACT>
+<DT><B>-v </B>
+
+<DD>
+output program name and version number, and quit
+<DT><B>-h</B>
+
+<DD>
+output usage summary and quit
+<DT><B>-l </B>
+
+<DD>
+changes the TeX processor to
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+latex">latex</A></B>(1)
+
+or
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+pdflatex">pdflatex</A></B>(1)
+
+<DT><B>-p </B>
+
+<DD>
+changes the TeX processor to
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+pdfetex">pdfetex</A></B>(1)
+
+or
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+pdflatex">pdflatex</A></B>(1)
+
+(and doesn't run
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+dvips">dvips</A></B>(1)
+
+and
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+ps2pdf">ps2pdf</A></B>(1)
+
+or
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+dvipdfm">dvipdfm</A></B>(1)
+
+)
+<DT><B>-d </B>
+
+<DD>
+changes the dvi processor to
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+dvipdfm">dvipdfm</A></B>(1)
+
+<DT><B>-s </B>
+
+<DD>
+stops processing at the dvi file
+<DT><B>-i</B>
+
+<DD>
+retain intermediate files
+<DT><B>-1</B>
+
+<DD>
+one-pass [pdf][la]tex processing
+<DT><B>-f</B>
+
+<DD>
+default processing
+<DT>Options affect processing of all succeeding MusiXTeX files unless changed by another option.<DD>
+<P>
+</DL>
+<A NAME="lbAE">&nbsp;</A>
+<H2>SEE ALSO</H2>
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+etex">etex</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+latex">latex</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+pdfetex">pdfetex</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+pdflatex">pdflatex</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+musixflx">musixflx</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+dvipdfm">dvipdfm</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+dvips">dvips</A></B>(1),
+
+<B><A HREF="http://localhost/cgi-bin/man/man2html?1+ps2pdf">ps2pdf</A></B>(1).
+
+<BR>
+
+musixdoc.pdf
+<P>
+<A NAME="lbAF">&nbsp;</A>
+<H2>AUTHOR </H2>
+
+This manual page was written by Bob Tennent &lt;<A HREF="mailto:rdt@cs.queensu.ca">rdt@cs.queensu.ca</A>&gt;.
+<P>
+
+<HR>
+<A NAME="index">&nbsp;</A><H2>Index</H2>
+<DL>
+<DT><A HREF="#lbAB">NAME</A><DD>
+<DT><A HREF="#lbAC">SYNOPSIS</A><DD>
+<DT><A HREF="#lbAD">OPTIONS</A><DD>
+<DT><A HREF="#lbAE">SEE ALSO</A><DD>
+<DT><A HREF="#lbAF">AUTHOR </A><DD>
+</DL>
+<HR>
+This document was created by
+<A HREF="http://localhost/cgi-bin/man/man2html">man2html</A>,
+using the manual pages.<BR>
+Time: 08:25:23 GMT, September 14, 2012
+</BODY>
+</HTML>
diff --git a/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.pdf b/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.pdf
deleted file mode 100644
index e3f9c8128d5..00000000000
--- a/Master/texmf-dist/doc/generic/musixtex/scripts/musixtex.pdf
+++ /dev/null
Binary files differ
diff --git a/Master/texmf-dist/scripts/musixtex/Windows/musixflx.bat b/Master/texmf-dist/scripts/musixtex/Windows/musixflx.bat
deleted file mode 100755
index 684441ebb3d..00000000000
--- a/Master/texmf-dist/scripts/musixtex/Windows/musixflx.bat
+++ /dev/null
@@ -1,6 +0,0 @@
-:: wrapper script to call musixflx.lua
-:: Usage: musixflx basename[.mx1 | .tex] [debug mode]
-:: Suggested by Tomasz Luczak (Tomek) t34www@googlemail.com
-
-@for /f "delims=" %%I in ('kpsewhich --format=texmfscripts %~n0.lua') do texlua "%%I" %*
-:end
diff --git a/Master/texmf-dist/scripts/musixtex/Windows/musixtex.bat b/Master/texmf-dist/scripts/musixtex/Windows/musixtex.bat
deleted file mode 100755
index 70c136972de..00000000000
--- a/Master/texmf-dist/scripts/musixtex/Windows/musixtex.bat
+++ /dev/null
@@ -1,6 +0,0 @@
-:: wrapper script to call musixtex.lua
-:: Usage: musixtex [options] basename[.tex]
-:: Suggested by Tomasz Luczak (Tomek) t34www@googlemail.com
-
-@for /f "delims=" %%I in ('kpsewhich --format=texmfscripts %~n0.lua') do texlua "%%I" %*
-:end
diff --git a/Master/texmf-dist/scripts/musixtex/musixtex.lua b/Master/texmf-dist/scripts/musixtex/musixtex.lua
index 6bac25e8d8a..1386db71fde 100755
--- a/Master/texmf-dist/scripts/musixtex/musixtex.lua
+++ b/Master/texmf-dist/scripts/musixtex/musixtex.lua
@@ -1,11 +1,11 @@
#!/usr/bin/env texlua
-VERSION = "0.4"
+VERSION = "0.6"
--[[
musixtex.lua: processes MusiXTeX files (and deletes intermediate files)
- (c) Copyright 2011 Bob Tennent rdt@cs.queensu.ca
+ (c) Copyright 2012 Bob Tennent rdt@cs.queensu.ca
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
@@ -26,6 +26,11 @@ VERSION = "0.4"
--[[
ChangeLog:
+ version 0.6 2012-09-14 RDT
+ Add -1 (one-pass [pdf][la]tex processing) option.
+
+ version 0.5 2011-11-28 RDT
+ Add -i (retain intermediate files) option.
version 0.4 2011-04-30 RDT
Allow multiple filenames (and options).
@@ -49,6 +54,8 @@ function usage()
print(" -p pdfetex (or pdflatex)")
print(" -d dvipdfm")
print(" -s stop at dvi")
+ print(" -i retain intermediate files")
+ print(" -1 one-pass [pdf][la]tex processing")
print(" -f restore default processing")
end
@@ -66,7 +73,9 @@ end
tex = "etex"
musixflx = "musixflx"
dvi = "dvips"
-ps2pdf = "ps2pdf"
+ps2pdf = "/usr/local/bin/ps2pdf"
+intermediate = 1
+passes = 2
exit_code = 0
narg = 1
@@ -94,8 +103,12 @@ repeat
dvi = "dvipdfm"; ps2pdf = ""
elseif this_arg == "-s" then
dvi = ""; ps2pdf = ""
+ elseif this_arg == "-i" then
+ intermediate = 0
+ elseif this_arg == "-1" then
+ passes = 1
elseif this_arg == "-f" then
- tex = "etex"; dvi = "dvips"; ps2pdf = "ps2pdf"
+ tex = "etex"; dvi = "dvips"; ps2pdf = "ps2pdf"; intermediate = 1; passes = 2
else
filename = this_arg
if filename ~= "" and string.sub(filename, -4, -1) == ".tex" then
@@ -106,24 +119,27 @@ repeat
else
print("Processing ".. filename .. ".tex.")
os.remove( filename .. ".mx2" )
- if (os.execute(tex .. " " .. filename) == 0) and
- (os.execute(musixflx .. " " .. filename) == 0) and
+ if (passes == 1 or os.execute(tex .. " " .. filename) == 0) and
+ (passes == 1 or os.execute(musixflx .. " " .. filename) == 0) and
(os.execute(tex .. " " .. filename) == 0) and
((tex ~= "latex" and tex ~= "pdflatex")
or (os.execute(tex .. " " .. filename) == 0)) and
(dvi == "" or (os.execute(dvi .. " " .. filename) == 0)) and
(ps2pdf == "" or (os.execute(ps2pdf .. " " .. filename .. ".ps") == 0) )
- then -- clean-up:
- os.remove( filename .. ".mx1" )
- os.remove( filename .. ".mx2" )
- if dvi ~= "" then
- os.remove( filename .. ".dvi" )
- end
+ then
if ps2pdf ~= "" then
print(filename .. ".pdf generated by " .. ps2pdf .. ".")
- os.remove( filename .. ".ps" )
end
- print("")
+ if intermediate == 1 then -- clean-up:
+ os.remove( filename .. ".mx1" )
+ os.remove( filename .. ".mx2" )
+ if dvi ~= "" then
+ os.remove( filename .. ".dvi" )
+ end
+ if ps2pdf ~= "" then
+ os.remove( filename .. ".ps" )
+ end
+ end
else
print("Musixtex processing of " .. filename .. ".tex fails.\n")
exit_code = 2
diff --git a/Master/texmf/doc/man/man1/musixtex.1 b/Master/texmf/doc/man/man1/musixtex.1
index c8460885b4a..669f8bd2ff5 100644
--- a/Master/texmf/doc/man/man1/musixtex.1
+++ b/Master/texmf/doc/man/man1/musixtex.1
@@ -1,5 +1,5 @@
.\" This manpage is licensed under the GNU Public License
-.TH MUSIXTEX 1 2011-05-21 "musixtex version 0.4" ""
+.TH MUSIXTEX 1 2012-09-14 "musixtex version 0.6" ""
.SH NAME
musixtex \- processes MusiXTeX files, deleting intermediate files
@@ -66,6 +66,12 @@ changes the dvi processor to
.TP
.B -s
stops processing at the dvi file
+.TP
+.B -i
+retain intermediate files
+.TP
+.B -1
+one-pass [pdf][la]tex processing
.TP
.B -f
default processing
diff --git a/Master/texmf/doc/man/man1/musixtex.man1.pdf b/Master/texmf/doc/man/man1/musixtex.man1.pdf
index 5588a85c6d6..a1a8bf2d114 100644
--- a/Master/texmf/doc/man/man1/musixtex.man1.pdf
+++ b/Master/texmf/doc/man/man1/musixtex.man1.pdf
Binary files differ
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index 4dfe0b69ffa..9ae5be649d0 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -1071,7 +1071,6 @@ chomp ($Build = `cd $Master/../Build/source && pwd`);
'latexdiff' => '&PREHOOK_latexdiff',
'mathspic' => '&PREHOOK_mathspic',
'movie15' => '&PREHOOK_flatten1',
- 'musixtex' => '&PREHOOK_musixtex',
'musixtex-fonts' => '&PREHOOK_unzip',
'mp3d' => '&PREHOOK_mp3d',
'pgf-blur' => '&PREHOOK_pgfblur',
@@ -1120,6 +1119,7 @@ chomp ($Build = `cd $Master/../Build/source && pwd`);
'luatexja' => '&POSTluatexja',
'm-tx' => '&POST_do_man',
'montex' => '&POSTmontex',
+ 'musixtex' => '&POSTmusixtex',
'niceframe' => '&POST_rmsymlink',
'pedigree-perl' => '&POSTpedigreeperl',
'pgf' => '&POSTpgf',
@@ -4684,17 +4684,6 @@ sub PREHOOK_mp3d {
&SYSTEM ("$RM -rf v1.0");
}
-sub PREHOOK_musixtex {
- print "PREHOOK_$package - unzip, scripts\n";
- # must unzip first so we can find the scripts.
- &PREHOOK_unzip ();
- #
- my $mandest = "$TOPDEST/texmf/doc/man/man1/";
- &xmkdir ($mandest);
- &SYSTEM ("$CP $DEST/doc/generic/$package/scripts/*.1 $mandest/");
- &tl_man_to_pdf ();
-}
-
sub PREHOOK_pgfblur {
print "PREHOOK_$package - build pdf doc\n";
&SYSTEM ("pdflatex pgf-blur.dtx");
@@ -5126,6 +5115,11 @@ sub POSTluatexja {
&SYSTEM ("$MV doc/* .; rmdir doc");
}
+sub POSTmusixtex {
+ print "POST$package - man pages\n";
+ &POST_do_man ("doc/generic/$package/scripts");
+}
+
sub POSTmontex {
print "\t POST$package - avoid 00readme case clash\n";
# these files are no longer used in TL.
@@ -5238,14 +5232,20 @@ sub POSTzhspacing {
&SYSTEM ("$MV doc/* .; rmdir doc");
}
+# (Generic post hook actions.)
+
# has to be post instead of specialman because we use the tds.zip.
+# Optional argument is directory where the man pages are as distributed
+# on CTAN.
sub POST_do_man {
- print "POST$package - mv man page\n";
+ my ($src_mandir) = @_;
+ $src_mandir = "doc/*/$package" if ! $src_mandir;
+ #
+ print "POST$package - mv *.1 man pages from $src_mandir\n";
my $mydest = "$TOPDEST/texmf/doc/man/man1/";
&xmkdir ($mydest);
&xchdir ($DEST);
- print STDERR `pwd`;
- &SYSTEM ("$MV doc/*/$package/*.1 $mydest");
+ &SYSTEM ("$MV $src_mandir/*.1 $mydest");
&tl_man_to_pdf ();
}