summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Master/texmf-dist/source/latex/paralist/paralist.drv55
-rw-r--r--Master/texmf-dist/source/latex/paralist/paralist.dtx1531
-rw-r--r--Master/texmf-dist/source/latex/paralist/paralist.ins38
3 files changed, 1624 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/paralist/paralist.drv b/Master/texmf-dist/source/latex/paralist/paralist.drv
new file mode 100644
index 00000000000..360d8c60648
--- /dev/null
+++ b/Master/texmf-dist/source/latex/paralist/paralist.drv
@@ -0,0 +1,55 @@
+%%
+%% This is file `paralist.drv',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% paralist.dtx (with options: `driver')
+%%
+%% Copyright 1998-2002 Bernd Schandl
+%% email schandl@gmx.net
+%% www http://schandl.gmxhome.de/paralist
+%%
+%% This file can be redistributed and/or modified under the terms
+%% of the LaTeX Project Public License distributed from CTAN
+%% archives in the directory macros/latex/base/lppl.txt; either
+%% version 1 of the license, or (at your option) any later version.
+%%
+%% \CharacterTable
+%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%% Digits \0\1\2\3\4\5\6\7\8\9
+%% Exclamation \! Double quote \" Hash (number) \#
+%% Dollar \$ Percent \% Ampersand \&
+%% Acute accent \' Left paren \( Right paren \)
+%% Asterisk \* Plus \+ Comma \,
+%% Minus \- Point \. Solidus \/
+%% Colon \: Semicolon \; Less than \<
+%% Equals \= Greater than \> Question mark \?
+%% Commercial at \@ Left bracket \[ Backslash \\
+%% Right bracket \] Circumflex \^ Underscore \_
+%% Grave accent \` Left brace \{ Vertical bar \|
+%% Right brace \} Tilde \~}
+%%
+\ProvidesFile{paralist.drv}%
+ [2002/03/18 v2.3b Extended list environments (BS)]
+\documentclass[11pt]{ltxdoc}
+\usepackage[defblank,neverdecrease]{paralist}
+
+%% Comment out the next line if you want the documentation for the source code.
+\OnlyDescription
+
+%% Uncomment the next two lines for a change history.
+%% See also the instructions above.
+%% \AtBeginDocument{\RecordChanges}
+%% \AtEndDocument{\PrintChanges}
+
+%% Uncomment the next two lines for a command index.
+%% See also the instructions above.
+%% \AtBeginDocument{\CodelineIndex}
+%% \AtEndDocument{\setcounter{IndexColumns}{2}\PrintIndex}
+
+\begin{document}
+ \DocInput{paralist.dtx}
+\end{document}
+
diff --git a/Master/texmf-dist/source/latex/paralist/paralist.dtx b/Master/texmf-dist/source/latex/paralist/paralist.dtx
new file mode 100644
index 00000000000..bcaa740dd34
--- /dev/null
+++ b/Master/texmf-dist/source/latex/paralist/paralist.dtx
@@ -0,0 +1,1531 @@
+% \iffalse
+% File paralist.dtx
+% Copyright 1998-2002 Bernd Schandl
+% email schandl@gmx.net
+% www http://schandl.gmxhome.de/paralist
+%
+% Documentation and documented source code for the paralist package.
+%
+% See the README file for instructions.
+%
+% This file can be redistributed and/or modified under the terms
+% of the LaTeX Project Public License distributed from CTAN
+% archives in the directory macros/latex/base/lppl.txt; either
+% version 1 of the license, or (at your option) any later version.
+%
+% \fi
+% \CheckSum{1046}
+%% \CharacterTable
+%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%% Digits \0\1\2\3\4\5\6\7\8\9
+%% Exclamation \! Double quote \" Hash (number) \#
+%% Dollar \$ Percent \% Ampersand \&
+%% Acute accent \' Left paren \( Right paren \)
+%% Asterisk \* Plus \+ Comma \,
+%% Minus \- Point \. Solidus \/
+%% Colon \: Semicolon \; Less than \<
+%% Equals \= Greater than \> Question mark \?
+%% Commercial at \@ Left bracket \[ Backslash \\
+%% Right bracket \] Circumflex \^ Underscore \_
+%% Grave accent \` Left brace \{ Vertical bar \|
+%% Right brace \} Tilde \~}
+%%
+% \iffalse
+%<*dtx>
+ \ProvidesFile{paralist.dtx}%
+%</dtx>
+%<package>\ProvidesPackage{paralist}%
+%<driver>\ProvidesFile{paralist.drv}%
+% \fi
+% \ProvidesFile{paralist.dtx}%
+ [2002/03/18 v2.3b Extended list environments (BS)]
+% \iffalse
+%<*driver>
+\documentclass[11pt]{ltxdoc}
+\usepackage[defblank,neverdecrease]{paralist}
+
+%% Comment out the next line if you want the documentation for the source code.
+\OnlyDescription
+
+%% Uncomment the next two lines for a change history.
+%% See also the instructions above.
+%% \AtBeginDocument{\RecordChanges}
+%% \AtEndDocument{\PrintChanges}
+
+%% Uncomment the next two lines for a command index.
+%% See also the instructions above.
+%% \AtBeginDocument{\CodelineIndex}
+%% \AtEndDocument{\setcounter{IndexColumns}{2}\PrintIndex}
+
+\begin{document}
+ \DocInput{paralist.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \changes{v1.0 (1998/10/09)}{}{Initial version}
+% \changes{v1.1 (1998/10/18)}{}{Added some examples}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Most of the package and the
+% documentation rewritten}
+% \changes{v1.5 (1999/03/15)}{1999/03/15}{Released under LPPL}
+% \changes{v1.7 (1999/04/01)}{1999/03/31}{Use \cs{GetFileInfo}}
+% \changes{v1.9 (2000/03/05)}{2000/03/05}{Email and WWW changed}
+% \changes{v2.2 (2001/09/30)}{2001/09/30}{WWW changed}
+% \changes{v2.2a (2001/10/02)}{2001/10/02}{Minor documentation changes}
+%
+%
+% \GetFileInfo{paralist.dtx}
+%
+% \makeatletter
+% \renewenvironment{theglossary}{%
+% \glossary@prologue \GlossaryParms \let\item\@idxitem \ignorespaces}{}
+% \makeatother
+%
+% \MakeShortVerb{\|}
+%
+% \let\package\textsf
+% \let\tab\indent
+% \IndexMin3cm
+%
+% \title{\package{paralist}\thanks{Package version \fileversion{} of
+% \filedate{}.} \\ Extended List Environments}
+% \author{Bernd Schandl \\ {\small |schandl@gmx.net|}}
+% \date{Printed on \today}
+% \maketitle
+%
+% \begin{abstract}
+% This package provides some new list environments. Itemized and enumerated
+% lists can be typeset within paragraphs, as paragraphs and in a compact
+% version. Most environments have optional arguments to format the labels.
+% Additionally, the \LaTeX\ environments |itemize| and |enumerate| can be
+% extended to use a similar optional argument.
+% \end{abstract}
+%
+% \section{Introduction}
+%
+% In a posting to |comp.text.tex| in May 1998, someone asked about the
+% possibility of an enumerated environment that
+% \begin{inparaenum}[(a)]
+% \item can be used within paragraphs,
+% \item takes care of enumeration and
+% \item has items that can be referenced. \label{pl2}
+% \end{inparaenum}
+% Another posting mentioned the package \package{theapa} as
+% a possible solution. Now that I was looking for that kind of environment and
+% found those old postings, I had a look at \package{theapa} and decided to
+% take out the part about list environments and rewrite it a little bit.
+%
+% Over time, compact versions of |enumerate|, |itemize| and |description| have
+% been added and optional arguments for most environments make it possible to
+% define a special way of formatting the labels.
+%
+% \section{Package Options}
+%
+% Certain parts of the package are only executed if appropriate options are
+% specified.
+% \begin{compactdesc}
+% \renewcommand*\makelabel[1]{\hspace\labelsep
+% \normalfont\mdseries\sffamily #1}
+% \item[newitem/olditem] With \textsf{newitem} (set by default), the \LaTeX\
+% environment |itemize| will be redefined to have an optional argument to
+% specify the format of the label. See Section~\ref{sec:format}.
+% Specifying \textsf{olditem} will leave |itemize| as it is.
+% \item[newenum/oldenum] With \textsf{newenum} (set by default), the \LaTeX\
+% environment |enumerate| will be redefined to have an optional argument
+% to specify the format of the label. See Section~\ref{sec:format}.
+% Specifying \textsf{oldenum} will leave |enumerate| as it is.
+% \item[alwaysadjust] The width of the labels of the environments
+% |compactenum|, |enumerate|, |compactitem| and |itemize| is always
+% adjusted to the actual label. For the default labels, this means that
+% the label width is usually decreased.
+% \item[neveradjust] The width of the labels is never adjusted, not even for
+% environments where you defined the labels manually using the optional
+% argument. This option is ignored if option \textsf{alwaysadjust} is used
+% as well.
+% \item[neverdecrease] If the width of the labels is adjusted, this option
+% avoids the decrease of the width. Here is an example why this might make
+% sense. If no \textsf{\dots adjust} option is specified, then the
+% indentation of the \cs{item} in |\begin{enumerate}| and
+% |\begin{enumerate}[1.]| is different although they have the same
+% labels.
+% \item[defblank] The two environments |inparablank| and |asparablank| will
+% be defined. See Section~\ref{sec:blank}.
+% \changes{v2.0 (2001/03/03)}{2001/03/03}{New options \textsf{pointlessenum}
+% and \textsf{pointedenum}}
+% \item[pointlessenum] The items in the enumerated environments are labeled
+% and referenced as in ``1'', ``1.1'', ``1.1.1'' and ``1.1.1.1''. See
+% also Section~\ref{sec:format}.
+% \item[pointedenum] The items in the enumerated environments are labeled
+% as in ``1.'', ``1.1.'', ``1.1.1.'' and ``1.1.1.1.'' and referenced
+% without the trailing point. See also Section~\ref{sec:format}. This
+% option is ignored if \textsf{pointlessenum} is used.
+% \item[flushright] The labels in the four lists mentioned above are set
+% flush right. As this is the \LaTeX\ default, this is also the default
+% for this package.
+% \item[flushleft] The labels in the four lists mentioned above are set
+% flush left.
+% \changes{v1.9 (2000/03/05)}{2000/03/05}{New options
+% \textsf{cfg}/\textsf{nocfg}}
+% \item[cfg] The configuration file |paralist.cfg| is loaded if it
+% exists. (default)
+% \item[nocfg] The configuration file is not loaded.
+% \end{compactdesc}
+% The option \textsf{increaseonly} is deprecated; use \textsf{neverdecrease}
+% instead.
+%
+% \section{Formatting the Labels}
+% \label{sec:format}
+%
+% All the itemized and enumerated environments have optional arguments to
+% specify the format of the labels. The following examples will only work if
+% you have loaded \package{paralist} \emph{without} the options
+% \textsf{olditem} and \textsf{oldenum}.
+%
+% Using the \LaTeX\ standard classes, |itemize| uses the following symbols
+% for the labels of the four list levels: {\textbullet}
+% {\normalfont\bfseries \textendash} {\textasteriskcentered}
+% {\textperiodcentered}. If you want to change this for a particular
+% environment, just say something like\\
+% \tab|\begin{itemize}[$\star$]|\\
+% and $\star$ will be used instead of the default symbol.
+%
+% The optional argument of the enumerated environment is a little more
+% complicated, but whoever has worked with David Carlisle's
+% \package{enumerate} package can skip the rest of the section since exactly
+% the same mechanism (and almost the same code) is used.
+%
+% The tokens |A|, |a|, |I|, |i|, and |1| can be used in the optional argument
+% to produce the counter with one of the styles \cs{Alph}, \cs{alph},
+% \cs{Roman}, \cs{roman} and \cs{arabic}.\footnote{%
+% The set of tokens can be extended. Look for \cs{pl@hook} in the code
+% section.}
+% These letters may be surrounded by any other string involving any other
+% \TeX\ expression. However, the tokens |A a I i 1| must be inside a |{ }|
+% group if they should not be taken as special. A few examples follow.\\
+% \tab|\begin{enumerate}[(i)]|\\
+% produces the labels (i), (ii), (iii) \dots\\
+% \tab|\begin{enumerate}[{example} a)]|\\
+% produces example a), example b), example c) \dots\\
+% \tab|\begin{enumerate}[{A}-1]|\\
+% produces A-1, A-2, A-3 \dots\\
+% \tab|\begin{enumerate}[\bfseries {Item} I]|\\
+% produces \textbf{Item I}, \textbf{Item II}, \textbf{Item III} \dots
+%
+% Note that in the last example |[\textbf{Item I}]| does not work because
+% the special token |I| is inside a group.
+%
+% The \cs{ref} command produces only the counter without the surrounding text,
+% so in the examples above you would get i, a, 1 and I respectively if you
+% referenced the first item.
+%
+% \DescribeMacro{\pointedenum}
+% \DescribeMacro{\pointlessenum}
+% There are also two package options and two corresponding macros to format
+% the labels and references of enumerated environments. The option
+% \textsf{pointedenum} and the macro |\pointedenum| format the labels as in
+% ``1.'', ``1.1.'', ``1.1.1.'' and ``1.1.1.1.'' and the references without the
+% trailing point. The option \textsf{pointlessenum} and the macro
+% |\pointlessenum| do not use the trailing point in the labels either.
+%
+% While the package options make a global change, the macros can be used for a
+% local change or to define a special environment, for example\\
+% \tab|\newenvironment{myenum}%|\\
+% \tab| {\pointedenum\begin{enumerate}}%|\\
+% \tab| {\end{enumerate}}|\\
+% Note that |\begin{enumerate}| is used \emph{after} |\pointedenum|, otherwise
+% the optional argument of enumerate would not work (in case you want to use
+% them within the same environment which doesn't really make sense).
+%
+% \DescribeMacro{\paradescriptionlabel}
+% In the document classes, the label format for the |description| environment
+% is defined as\\
+% \tab|\newcommand*\descriptionlabel[1]{%|\\
+% \tab| \hspace\labelsep\normalfont\bfseries #1}|.\\
+% This is also used by |compactdesc|. For the environments |inparadesc| and
+% |asparadesc|, there is a separate macro called \cs{paradescriptionlabel}
+% defined (almost) like this:\\
+% \tab|\newcommand*\paradescriptionlabel[1]{%|\\
+% \tab| \normalfont\bfseries #1}|.
+%
+%
+% \section{Defaults for Labels and Margins}
+%
+% If you want your lists labeled differently than the \LaTeX\ default
+% throughout your document, it is a bit awkward to use the optional argument
+% of the environments all the time. Therefore three macros are provided
+% to define the labels and the left margins of the list environments.
+%
+% Note that the macros defining the labels do \emph{not} adapt the left
+% margins of the list environments because this may have unexpected side
+% effects. If you want that change, you have to explicitly use
+% \cs{setdefaultleftmargin}.
+%
+% If in any of the following three macros an argument is empty, then
+% the according label or margin is left unchanged.
+%
+% \DescribeMacro{\setdefaultitem}
+% The default labels of itemized environments can be set by using the macro
+% \cs{setdefaultitem} which needs four arguments. To get the \LaTeX\ default
+% labels say\\
+% \tab|\setdefaultitem{\textbullet}%|\\
+% \tab| {\normalfont\bfseries \textendash}%|\\
+% \tab| {\textasteriskcentered}{\textperiodcentered}|\\
+% (which is of course silly because you don't need to do anything if you want
+% to stick with the default labels). If you want a triangle
+% ($\,\triangleright$) instead of the endash for level two just say\\
+% \tab|\setdefaultitem{}{$\triangleright$}{}{}|.
+%
+% \DescribeMacro{\setdefaultenum}
+% The labels of enumerated lists are formatted with \cs{setdefaultenum}
+% using the mechanism described in Section~\ref{sec:format}. The \LaTeX\
+% default labels could be defined by\\
+% \tab|\setdefaultenum{1.}{(a)}{i.}{A.}|.\\
+% If you want capital Roman letters for level three, just say\\
+% \tab|\setdefaultenum{}{}{I.}{}|.
+%
+% \DescribeMacro{\setdefaultleftmargin}
+% To change the left margin of the lists, use \cs{setdefaultleftmargin}.
+% The length \cs{leftmargin}$\,n$ specifies the indentation of a list of level
+% $n$ with respect to the list of level $n-1$ or the surrounding text
+% (if $n=1$). The environments that use \cs{leftmargin}$\,n$ are (at least)
+% |enumerate|, |compactenum|, |itemize| and |compactitem| (maybe a few more
+% that I am not aware of). The \LaTeX\ settings could be defined by\\
+% \tab|\setdefaultleftmargin{2.5em}{2.2em}{1.87em}{1.7em}{1em}{1em}|.\\
+% In \textsf{twocolumn} mode \LaTeX\ uses a smaller margin for the first,
+% fifth and sixth level which could be defined by\\
+% \tab|\setdefaultleftmargin{2em}{}{}{}{.5em}{.5em}|.
+%
+% The macros \cs{defaultitem}, \cs{defaultenum} and |\defaultleftmargin|
+% should not be used anymore. They are only kept for backward compatibility
+% with package versions~$<2.1$.
+%
+% If some of your changes should appear in \emph{every} document that uses
+% \package{paralist}, put them in a file |paralist.cfg| which is read at the
+% end of the package in case it exists (unless you specified the option
+% \textsf{nocfg}).
+%
+% \section{New Environments}
+%
+% \subsection{Enumerated Environments}
+%
+% \DescribeEnv{asparaenum}
+% The environment |asparaenum| is an enumerated environment in which the
+% items are formatted as separate paragraphs.
+%
+% As an example, we use |asparaenum| within this paragraph.
+% \begin{asparaenum}
+% \item Every \cs{item} is basically set as a separate paragraph. The second
+% line is \emph{not} indented (this is a feature, not a bug).
+% \item The next \cs{item} looks like this and is labeled. \label{pl1}
+% \end{asparaenum}
+% The example was produced by the following piece of code:
+%\begin{verbatim}
+% \begin{asparaenum}
+% \item Every ...
+% \item The next ... \label{pl1}
+% \end{asparaenum}
+%\end{verbatim}
+% By saying |\ref{pl1}| we get \ref{pl1}.
+%
+% \DescribeEnv{inparaenum}
+% The |inparaenum| environment formats an enumerated list within a paragraph,
+% just like the one in the introduction.
+%
+% The example in the introduction was set by the following commands:
+%\begin{verbatim}
+% ... of an enumerated environment that
+% \begin{inparaenum}[(a)]
+% \item can be used within paragraphs,
+% \item takes care of enumeration and
+% \item has items that can be referenced. \label{pl2}
+% \end{inparaenum}
+% Another posting mentioned ...
+%\end{verbatim}
+% By saying |\ref{pl2}| we get \ref{pl2}.
+%
+% \DescribeEnv{compactenum}
+% The |compactenum| environment is just a compact version of the standard
+% |enumerate| environment. All the vertical skips are set to zero (actually
+% they are adjustable, see Section~\ref{sec:Finetuning}).
+%
+% \subsection{Itemized Environments}
+%
+% \DescribeEnv{asparaitem}
+% The |asparaitem| environment is very similar to |asparaenum|. It just uses
+% symbols instead of enumerating the items. The environment has an optional
+% argument which specifies the symbol. For an example see
+% Section~\ref{sec:Nesting-Environments}.
+%
+% \DescribeEnv{inparaitem}
+% Similar to |inparaenum| I added an environment |inparaitem| which also
+% has an optional argument. I don't really know why anybody would use it, but
+% I added it because of symmetry.
+%
+% \DescribeEnv{compactitem}
+% The |compactitem| environment is again just a compact version of the
+% standard |itemize| environment with all the vertical skips set to zero.
+% So by using this environment
+% \begin{compactitem}[$\circ$]
+% \item you can save some space and
+% \item specify the symbol.
+% \item Let me add a longer item so that you can see that we have a different
+% indentation than in the |asparaitem| environment.
+% \end{compactitem}
+% The code of the example above is
+%\begin{verbatim}
+% \begin{compactitem}[$\circ$]
+% \item you can save some space and
+% \item specify the symbol.
+% \item Let me add ...
+% \end{compactitem}
+%\end{verbatim}
+%
+% \subsection{Descriptive Environments}
+%
+% \DescribeEnv{asparadesc}
+% The |asparadesc| environment is again very similar to |asparaenum|. It just
+% uses the optional arument of \cs{item} as the ``intro'' for the paragraph.
+%
+% \DescribeEnv{inparaitem}
+% Again similar to |inparaenum|, I added an environment |inparadesc|. Probably
+% nobody would use it but I added it because of symmetry.
+%
+% \DescribeEnv{compactdesc}
+% The |compactdesc| environment is copied from the \LaTeX{} standard classes
+% with all the vertical skips set to zero. By the way, does anybody know why
+% |description| has to be defined by the document class and is not defined in
+% |ltlists.dtx|?
+%
+% \subsection{Blank Environments}
+% \label{sec:blank}
+%
+% Someone requested list environments that print their items as if there was no
+% list. It seems that this makes entering structured data a little easier in
+% LyX. Since not everybody needs these (odd) environments they are only
+% defined if the package is loaded with the option \textsf{defblank}. The
+% following two environments do not have optional arguments because there is
+% no label to format.
+%
+% \DescribeEnv{asparablank}
+% Every item is formatted just as if it was a regular paragraph. If you want
+% to use the optional argument of \cs{item}, you have to add some white space
+% at the end because \cs{labelsep} is set to zero. Use something like\\
+% \tab|\item[\textbullet\hspace{.5em}]|
+%
+% \DescribeEnv{inparablank}
+% The items are set
+% \begin{inparablank}
+% \item just as regular text.
+% \item The ``white space problem'' mentioned in the last paragraph
+% \item is handled automatically.
+% \end{inparablank}
+% If I didn't tell you, you wouldn't know that this paragraph is set using the
+% following construction:
+%\begin{verbatim}
+% ... are set
+% \begin{inparablank}
+% \item just as ...
+% \item The ...
+% \item is handled ...
+% \end{inparablank}
+% If I didn't ...
+%\end{verbatim}
+%
+%\section{Nesting Environments}
+%\label{sec:Nesting-Environments}
+%
+% All the environments can be nested just as the standard list environments
+% although the results might sometimes not be as expected. For example, it's
+% probably not a good idea to call another list environment within a
+% |inpara...| environment, but why should anyone want to do this? The maximal
+% nesting level is six (four of the same kind), just as for the \LaTeX\
+% environments.
+%
+% This paragraph is
+% \begin{asparaitem}[$\star$]
+% \item an example for the usage of |asparaitem| and its optional argument,
+% \item and a demonstration that
+% \begin{inparaenum}[(i)]
+% \item you can use |inparaenum| within |asparaitem| and
+% \item you can still reference it. \label{pl3}
+% \end{inparaenum}
+% \end{asparaitem}
+% The reference was in subitem (\ref{pl3}).
+% The code of the last example is
+%\begin{verbatim}
+% \begin{asparaitem}[$\star$]
+% \item an example ...
+% \item and a demonstration that
+% \begin{inparaenum}[(i)]
+% \item you can use ...
+% \item can still ... \label{pl3}
+% \end{inparaenum}
+% \end{asparaitem}
+% The reference was in subitem (\ref{pl3}).
+%\end{verbatim}
+%
+%\section{Fine-Tuning}
+%\label{sec:Finetuning}
+%
+% Ok, I already hear someone saying ``Your compact lists are a nice idea,
+% but I'd like to have it a little less compact.'' Here is a solution. The
+% following skips can be adjusted using \cs{setlength} and affect the
+% spacing of the |compact...| environments. The names are chosen similar to
+% the \LaTeX{} names, so I just copy the explanation from |ltlists.dtx|.
+% \begin{compactdesc}
+% \item[\cs{pltopsep}:] Space between first item and preceding paragraph.
+% \item[\cs{plpartopsep}:] Extra space added to \cs{topsep} when
+% environment starts a new paragraph (is called in vmode).
+% \item[\cs{plitemsep}:] Space between successive items.
+% \item[\cs{plparsep}:] Space between paragraphs within an item -- the
+% \cs{parskip} for this environment.
+% \end{compactdesc}
+% Actually, the two |...topsep| skips are added before \emph{and after} the
+% list.
+%
+% The default value for all of them is 0\,pt. It is probably a good idea to
+% define them depending on the font size if they are non-zero, i.\,e.\ using
+% units such as |ex| or |em|.
+%
+% \section{Bugs and Wishes}
+%
+% No bugs \dots that I know of.
+%
+% \changes{v2.3 (2002/03/10)}{2002/03/10}{Describe incombatibility with
+% \package{babel}}
+% Well, there is actually one issue if you use the \package{babel} package
+% with one of the options \textsf{acadian}, \textsf{canadien},
+% \textsf{francais}, \textsf{frenchb} or \textsf{french} (which all do
+% essentially the same). Since it redefines the itemize environment
+% at the \cs{start\{document\}}, the definition of |itemize| made by
+% \package{paralist} is lost. There are three possible fixes:
+% \begin{compactenum}
+% \item Accept the |itemize| environment without optional argument.~|:(|
+% \item Use \cs{FrenchItemizeSpacingfalse} after loading \package{babel} which
+% will avoid the redefinition of |itemize| by \package{babel}.~|:/|
+% \item Figure out a way to combine the code in \package{babel} and
+% \package{paralist} and send the solution to me.~|:)|
+% \end{compactenum}
+%
+% Feel free to let me know about any problems, suggestions and wishes you have
+% concerning this package and its documentation. Praise is welcome,
+% too |;-)| The most recent version of this package can always be found on
+% CTAN or at |http://schandl.gmxhome.de/paralist/|.
+%
+% \section{Acknowledgments}
+%
+% I want to thank all the users who helped me with their
+% comments finding bugs and extending the package. A big ``Thank you'' goes to
+% David Carlisle, because there wouldn't be any optional arguments for the
+% enumerated environments without the code from his
+% \package{enumerate} package. Some pieces of code of the |inpara...|
+% environments are inspired by Mogens Lemvig Hansen's \package{shortlst}
+% package.
+%
+% \StopEventually
+%
+% \section{Implementation}
+%
+% At the beginning of this file, the |\ProvidesPackage| macro was executed.
+% So we only need to state that we need \LaTeXe.
+% \begin{macrocode}
+%<*package>
+\NeedsTeXFormat{LaTeX2e}
+% \end{macrocode}
+%
+% \subsection{Package Options}
+%
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Package options added}
+% \changes{v1.3 (1999/01/19)}{1999/01/18}{Option \textsf{increaseonly} added}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{Options \textsf{olditem} and
+% \textsf{oldenum} added}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{Options \textsf{newitem} and
+% \textsf{newenum} are set by default}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Options \textsf{alwaysadjust},
+% \textsf{neveradjust} and \textsf{neverdecrease} added; option
+% \textsf{increaseonly} only kept for compatibility}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{Options \textsf{flushleft} and
+% \textsf{flushright} added}
+% First we define the package options. The option \textsf{increaseonly} is
+% only kept for compatibility.
+% \begin{macrocode}
+\newif\if@plnewitem\@plnewitemtrue
+\newif\if@plnewenum\@plnewenumtrue
+\newif\if@plalwaysadjust\@plalwaysadjustfalse
+\newif\if@plneveradjust\@plneveradjustfalse
+\newif\if@plneverdecrease\@plneverdecreasefalse
+\newif\if@pldefblank\@pldefblankfalse
+\newif\if@plpointedenum\@plpointedenumfalse
+\newif\if@plpointlessenum\@plpointlessenumfalse
+\newif\if@plflushright\@plflushrighttrue
+\newif\if@plloadcfg\@plloadcfgtrue
+\DeclareOption{newitem}{\@plnewitemtrue}
+\DeclareOption{olditem}{\@plnewitemfalse}
+\DeclareOption{newenum}{\@plnewenumtrue}
+\DeclareOption{oldenum}{\@plnewenumfalse}
+\DeclareOption{alwaysadjust}{\@plalwaysadjusttrue}
+\DeclareOption{neveradjust}{\@plneveradjusttrue}
+\DeclareOption{neverdecrease}{\@plneverdecreasetrue}
+\DeclareOption{increaseonly}{\@plneverdecreasetrue
+ \PackageWarningNoLine{Paralist}{Option increaseonly deprecated.
+ \MessageBreak Use option neverdecrease instead}}
+\DeclareOption{defblank}{\@pldefblanktrue}
+\DeclareOption{pointedenum}{\@plpointedenumtrue}
+\DeclareOption{pointlessenum}{\@plpointlessenumtrue}
+\DeclareOption{cfg}{\@plloadcfgtrue}
+\DeclareOption{nocfg}{\@plloadcfgfalse}
+\DeclareOption{flushright}{\@plflushrighttrue}
+\DeclareOption{flushleft}{\@plflushrightfalse}
+\ExecuteOptions{newitem,newenum,cfg,flushright}
+\ProcessOptions\relax
+% \end{macrocode}
+% \changes{v2.3 (2002/03/10)}{2002/03/07}{Option \textsf{alwaysadjust}
+% overwrites \textsf{neveradjust}}
+% Make sure that \textsf{alwaysadjust} overwrites \textsf{neveradjust}.
+% \begin{macrocode}
+\if@plalwaysadjust\@plneveradjustfalse\fi
+% \end{macrocode}
+%
+% \subsection{New Skips}
+%
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Counters \texttt{asparaenum} and
+% \texttt{inparaenum} removed}
+% The new skips are all set to zero.
+% \changes{v1.1 (1998/10/18)}{}{Skips to adjust spacing in \texttt{compact...}
+% environments defined}
+% \begin{macrocode}
+\newlength{\pltopsep}
+\newlength{\plpartopsep}
+\newlength{\plitemsep}
+\newlength{\plparsep}
+\setlength{\pltopsep}{0pt}
+\setlength{\plpartopsep}{0pt}
+\setlength{\plitemsep}{0pt}
+\setlength{\plparsep}{0pt}
+% \end{macrocode}
+%
+% \subsection{Little ``Helper'' Macros}
+%
+% \begin{macro}{\if@empty}
+% \changes{v1.4 (1999/01/27)}{1999/01/19}{New macro}
+% A small macro to detect whether |#1| is empty.
+% \begin{macrocode}
+\def\if@empty#1#2#3{%
+ \def\@tempa{#1}%
+ \ifx\@tempa\@empty#2\else#3\fi}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@item}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{New macro \cs{pl@item} used for all
+% \texttt{inpara...} environments}
+% \changes{v1.7 (1999/04/01)}{1999/04/01}{Use \cs{nobreakspace} instead of
+% \texttt{\textasciitilde}}
+% \changes{v1.7 (1999/04/01)}{1999/04/01}{Put argument in group to keep
+% e.\,g.~font changes local}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{Use \cs{makelabel}}
+% The following macro is used for all \texttt{inpara...} environments.
+% It adds space after the label only when the label has a positive width.
+% \begin{macrocode}
+\def\pl@item[#1]{%
+ \if@noitemarg
+ \@noitemargfalse
+ \if@nmbrlist
+ \refstepcounter{\@listctr}%
+ \fi
+ \fi
+ \settowidth{\@tempdima}{#1}%
+ \ifdim\@tempdima>\z@\makelabel{{#1}}\nobreakspace\fi
+ \ignorespaces
+ }
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\paradescriptionlabel}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New macro}
+% Similar to the \LaTeX\ macro \cs{descriptionlabel} we define a macro
+% for the description environments in and as paragraphs.
+% \begin{macrocode}
+\def\paradescriptionlabel#1{{\normalfont\bfseries #1}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\enumlabel}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New macro}
+% \changes{v2.2 (2001/09/30)}{2001/09/23}{Use \cs{hfil} instead of \cs{hss}
+% for flushleft}
+% \changes{v2.2 (2001/09/30)}{2001/09/30}{No need for \cs{llap} in flushright}
+% Similar to the \LaTeX\ macro \cs{descriptionlabel} we define a macro
+% for the enumerated environments depending on whether the label should be set
+% flush left or flush right.
+% \begin{macrocode}
+\if@plflushright
+ \def\enumlabel#1{\hss#1}
+\else
+ \def\enumlabel#1{#1\hfil}
+\fi
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\itemlabel}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New macro}
+% \changes{v2.2 (2001/09/30)}{2001/09/23}{Use \cs{hfil} instead of \cs{hss}
+% for flushleft}
+% \changes{v2.2 (2001/09/30)}{2001/09/30}{No need for \cs{llap} in flushright}
+% Similar to the \LaTeX\ macro \cs{descriptionlabel} we define a macro
+% for the itemized environments depending on whether the label should be set
+% flush left or flush right.
+% \begin{macrocode}
+\if@plflushright
+ \def\itemlabel#1{\hss#1}
+\else
+ \def\itemlabel#1{#1\hfil}
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Adjusting the Label Width}
+%
+% The width of the label is only adjusted either if the format of the label
+% was specified manually and the option \textsf{neveradjust} was \emph{not}
+% used or if the option \textsf{alwaysadjust} was used. Then
+% |\leftmargin|$\,n$ is set to the width of the label plus |\labelsep|.
+% The width of the label is only decreased if the option
+% \textsf{neverdecrease} was \emph{not} used.
+%
+% \changes{v2.3 (2002/03/10)}{2002/03/07}{New flags to decide on label width
+% adjustment}
+% First we need some flags to indicate whether the label was redefined by the
+% environment and whether the label should be adjusted.
+% \begin{macrocode}
+\newif\if@plmylabel\@plmylabelfalse
+\newif\if@pldoadjust\@pldoadjustfalse
+% \end{macrocode}
+%
+% \begin{macro}{\@adjust@enum@labelwidth}
+% \changes{v1.3 (1999/01/19)}{1999/01/18}{Depending on option
+% \textsf{increaseonly}, \cs{leftmargin}$\,n$ may only be increased}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New macro}
+% \changes{v2.3 (2002/03/10)}{2002/03/07}{Use new flags}
+% For the enumerated environments, the counter is first set to 7 so that we
+% get the width of `vii' if Roman numbering is in force.
+% \begin{macrocode}
+\def\@adjust@enum@labelwidth{%
+ \if@plneveradjust\else
+ \if@plalwaysadjust\@pldoadjusttrue\else
+ \if@plmylabel\@pldoadjusttrue\fi
+ \fi
+ \fi
+ \if@pldoadjust
+ \csname c@\@enumctr\endcsname7
+ \settowidth{\@tempdima}{%
+ \csname label\@enumctr\endcsname\hspace{\labelsep}}%
+% \end{macrocode}
+% \changes{v2.3 (2002/03/10)}{2002/03/10}{Use \cs{@listdepth} for $n$ in
+% \cs{leftmargin}$\,n$}
+% The \cs{leftmargin}$\,n$ has to be adjusted (where $n$ is \cs{@listdepth})
+% but we first have to increase \cs{@listdepth} by one since the list has not
+% yet started. This is reset right afterwards.
+% \begin{macrocode}
+ \advance\@listdepth by 1\relax
+ \if@plneverdecrease
+ \ifdim\@tempdima >
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \@tempdima
+ \fi
+ \else
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \@tempdima
+ \fi
+ \advance\@listdepth by -1\relax
+ \fi
+ \@pldoadjustfalse
+ \@plmylabelfalse}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\@adjust@item@labelwidth}
+% \changes{v1.3 (1999/01/19)}{1999/01/18}{\cs{leftmargin}$\,n$ adapted
+% according to the width of the symbol}
+% \changes{v1.3 (1999/01/19)}{1999/01/18}{Depending on option
+% \textsf{increaseonly}, \cs{leftmargin}$\,n$ may only be increased}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New macro}
+% \changes{v2.3 (2002/03/10)}{2002/03/07}{Use new flags}
+% For itemized labels, no counter needs to be set. The label is hidden in a
+% macro the name of which is stored in \cs{@itemitem}.
+% \begin{macrocode}
+\def\@adjust@item@labelwidth{%
+ \if@plneveradjust\else
+ \if@plalwaysadjust\@pldoadjusttrue\else
+ \if@plmylabel\@pldoadjusttrue\fi
+ \fi
+ \fi
+ \if@pldoadjust
+ \settowidth{\@tempdima}{%
+ \csname\@itemitem\endcsname\hspace{\labelsep}}%
+% \end{macrocode}
+% \changes{v2.3 (2002/03/10)}{2002/03/10}{Use \cs{@listdepth} for $n$ in
+% \cs{leftmargin}$\,n$}
+% The \cs{leftmargin}$\,n$ has to be adjusted (where $n$ is \cs{@listdepth})
+% but we first have to increase \cs{@listdepth} by one since the list has not
+% yet started. This is reset right afterwards.
+% \begin{macrocode}
+ \advance\@listdepth by 1\relax
+ \if@plneverdecrease
+ \ifdim\@tempdima >
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \@tempdima
+ \fi
+ \else
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \@tempdima
+ \fi
+ \advance\@listdepth by -1\relax
+ \fi
+ \@pldoadjustfalse
+ \@plmylabelfalse}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Label of Enumerated Environments}
+%
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Added optional argument to all
+% enumerated environments}
+% It follows all the stuff for the optional argument of the enumerated
+% environments. The code and most of its documentation is basically
+% copied from David Carlisle's \package{enumerate} package.
+%
+% \begin{macro}{\pl@lab}
+% First we define an internal token register which is used to build up
+% the label command from the optional argument.
+% \begin{macrocode}
+\newtoks\pl@lab
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@qmark}
+% This just expands to a `?'. \cs{ref} will produce this, if no counter
+% is printed.
+% \begin{macrocode}
+\def\pl@qmark{?}
+% \end{macrocode}
+% \end{macro}
+% The next four macros build up the command that will print the
+% label. They each gobble one token or group from the optional argument
+% and add corresponding tokens to the register |\pl@lab|. They each end
+% with a call to |\pl@loop|, which starts the processing of the next
+% token.
+% \begin{macro}{\pl@label}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Count the number of tokens}
+% Add the counter to the label. Argument |#2| will be one of the `special'
+% tokens |A a I i 1|, and is thrown away. |#1| will be a command
+% like \cs{Roman}. In every call \cs{@tempcnta} is increased, so we can
+% check at the end that exactly one counter was defined.
+% \begin{macrocode}
+\def\pl@label#1#2{%
+ \edef\pl@the{\noexpand#1{\@enumctr}}%
+ \pl@lab\expandafter{\the\pl@lab\csname the\@enumctr\endcsname}%
+ \advance\@tempcnta1
+ \pl@loop}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@space}
+% \begin{macro}{\pl@sp@ce}
+% Add a space to the label. The tricky bit is to gobble the space token,
+% as you can not do this with a macro argument.
+% \begin{macrocode}
+\def\pl@space{\afterassignment\pl@sp@ce\let\@tempa= }
+\def\pl@sp@ce{\pl@lab\expandafter{\the\pl@lab\space}\pl@loop}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\pl@group}
+% Add a |{ }| group to the label.
+% \begin{macrocode}
+\def\pl@group#1{\pl@lab\expandafter{\the\pl@lab{#1}}\pl@loop}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@other}
+% Add anything else to the label.
+% \begin{macrocode}
+\def\pl@other#1{\pl@lab\expandafter{\the\pl@lab#1}\pl@loop}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@loop}
+% \begin{macro}{\pl@loop@}
+% The body of the main loop.
+% Eating tokens this way instead of using |\@tfor| lets you see
+% spaces and \emph{all} braces. |\@tfor| would treat |a| and
+% |{a}| as special, but not |{{a}}|.
+% \begin{macrocode}
+\def\pl@loop{\futurelet\pl@temp\pl@loop@}
+\def\pl@loop@{%
+ \ifx A\pl@temp \def\@tempa{\pl@label\Alph }\else
+ \ifx a\pl@temp \def\@tempa{\pl@label\alph }\else
+ \ifx i\pl@temp \def\@tempa{\pl@label\roman }\else
+ \ifx I\pl@temp \def\@tempa{\pl@label\Roman }\else
+ \ifx 1\pl@temp \def\@tempa{\pl@label\arabic}\else
+ \ifx \@sptoken\pl@temp \let\@tempa\pl@space \else
+ \ifx \bgroup\pl@temp \let\@tempa\pl@group \else
+ \ifx \@@@\pl@temp \let\@tempa\@gobble \else
+ \let\@tempa\pl@other
+% \end{macrocode}
+% Hook for possible extensions.
+% \begin{macrocode}
+ \pl@hook
+ \fi\fi\fi\fi\fi\fi\fi\fi
+% \end{macrocode}
+% \end{macro}
+% Process the current token, then look at the next.
+% \begin{macrocode}
+ \@tempa}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@hook}
+% \changes{v1.6 (1999/03/27)}{1999/03/26}{Added extension hook}
+% Hook for possible extensions.
+% Some packages may want to extend the number of special characters
+% that are associated with counter representations. You can use
+% e.\,g.~Greek or Russian characters. Here is an example of a footnote
+% symbol counter, triggered by |*|.
+%
+% To enable a new counter type based on a letter, you just need
+% to add a new |\ifx| clause similar to the code above. To make
+% |*| trigger footnote symbol counting do the following.
+%
+% Initialize the hook, in case the package is loaded before
+% \package{paralist}.\\
+% \tab|\providecommand\pl@hook{}|
+%
+% Add to the hook a new |\ifx| clause that associates |*| with the
+% |\fnsymbol| counter command.
+%\begin{verbatim}
+% \g@addto@macro\pl@hook{%
+% \ifx *\pl@temp
+% \def\@tempa{\pl@label\fnsymbol}%
+% \fi}
+%\end{verbatim}
+% This code sequence should work whether it is loaded before or after
+% the \package{paralist} package. Any number of new counter types may be added
+% in this way.
+%
+% At this point we just need to initialize the hook, taking care not
+% to overwrite any definitions another package may already have added.
+% \begin{macrocode}
+\providecommand\pl@hook{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\@enumlabel@}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Use token counter and take care
+% of extra bracket}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Adjustment of label width moved to
+% a separate macro}
+% \changes{v2.3 (2002/03/10)}{2002/03/07}{Set new flags}
+% The following macro handles the optional argument of an enumerated
+% environment. Its first argument is the macro that should be called
+% after \cs{@enumlabel@} has done the job, the second one is the
+% optional argument from the calling environment.
+% \begin{macrocode}
+\def\@enumlabel@#1[#2]{%
+% \end{macrocode}
+% The flag is set that the environment redefines its label.
+% \begin{macrocode}
+ \@plmylabeltrue
+% \end{macrocode}
+% We initialize the number of counter-defining tokens to 0.
+% Then \cs{pl@lab} and \cs{pl@the} are initialized. Later, \cs{pl@the}
+% will be used to define \cs{theenum}\,$n$.
+% \begin{macrocode}
+ \@tempcnta0
+ \pl@lab{}%
+ \let\pl@the\pl@qmark
+% \end{macrocode}
+% Now we analyze the second argument using a loop.
+% As we will explain in the definition of |asparaenum|, we had to add an
+% extra bracket |[| to the second argument, which we have to gobble
+% before we start processing it. The macro
+% \cs{@@@} is never expanded (or even defined), it is just used to detect
+% the end of the token list.
+% \begin{macrocode}
+ \expandafter\pl@loop\@gobble#2\@@@
+% \end{macrocode}
+% If there was no special token or several special tokens we issue a
+% warning.
+% \begin{macrocode}
+ \ifnum\@tempcnta=1\else
+ \PackageWarning{paralist}{Incorrect label; no or multiple
+ counters.\MessageBreak The label is: \@gobble#2}%
+ \fi
+% \end{macrocode}
+% Define |\labelenum|$\,n$ and |\theenum|$\,n$.
+% \begin{macrocode}
+ \expandafter\edef\csname label\@enumctr\endcsname{\the\pl@lab}%
+ \expandafter\let\csname the\@enumctr\endcsname\pl@the
+% \end{macrocode}
+% Finally call the macro that finishes the \cs{begin} part of the
+% calling environment.
+% \begin{macrocode}
+ #1}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Label of the Itemized Environment}
+%
+% \begin{macro}{\@itemlabel@}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Adjustment of label width moved to
+% a separate macro}
+% \changes{v2.3 (2002/03/10)}{2002/03/07}{Set new flags}
+% The handling of the optional argument of itemized environments is a lot
+% easier.
+% \begin{macrocode}
+\def\@itemlabel@#1[#2]{%
+ \@plmylabeltrue
+ \def\pl@itemitem{#2}%
+ \def\@itemitem{pl@itemitem}%
+ #1}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Enumerated Environments}
+%
+% \begin{environment}{asparaenum}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Add extra bracket to optional
+% argument}
+% The first environment formats the enumerated items as paragraphs.
+% Most of the skips are set to zero, the items are indented as if
+% they were paragraphs and |\makelabel| is redefined so that it
+% just prints the counter.
+% \begin{macrocode}
+\def\asparaenum{%
+ \ifnum\@enumdepth>\thr@@
+ \@toodeep
+ \else
+ \advance\@enumdepth\@ne
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ \fi
+% \end{macrocode}
+% In the following line the second bracket |[| seems to be superfluous.
+% Here is why we need it. If \TeX\ finds an argument in curly braces
+% then it strips of the braces before handing the argument to the
+% macro \cs{@enumlabel@}. So the optional argument |[{\bfseries a}]|
+% would be accepted, although the counter is in a group. By adding
+% the bracket to the argument we will never have braces around the
+% whole argument. In the macro \cs{@enumlabel@} the bracket is
+% gobbled before the processing of the argument starts.
+% \begin{macrocode}
+ \@ifnextchar[{\@enumlabel@{\@asparaenum@}[}{\@asparaenum@}}
+\def\@asparaenum@{%
+ \expandafter\list\csname label\@enumctr\endcsname{%
+ \usecounter{\@enumctr}%
+ \labelwidth\z@
+ \labelsep.5em
+ \leftmargin\z@
+ \parsep\parskip
+ \itemsep\z@
+ \topsep\z@
+ \partopsep\parskip
+ \itemindent\parindent
+ \advance\itemindent\labelsep
+ \def\makelabel##1{##1}}}
+\let\endasparaenum\endlist
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{inparaenum}
+% \changes{v1.0a (1998/10/13)}{}{Corrected definition of \cs{theinparaenum}}
+% \changes{v1.1 (1998/10/18)}{}{Make space after number non-breaking}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Add extra bracket to optional
+% argument}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{Define \cs{makelabel}}
+% Now the enumerated environment within a paragraph. Since it is
+% not really a list we have to redefine |\@item|.
+% \begin{macrocode}
+\def\inparaenum{%
+ \ifnum\@enumdepth>\thr@@
+ \@toodeep
+ \else
+ \advance\@enumdepth\@ne
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ \fi
+ \@ifnextchar[{\@enumlabel@{\@inparaenum@}[}{\@inparaenum@}}
+\def\@inparaenum@{%
+ \usecounter{\@enumctr}%
+ \def\@itemlabel{\csname label\@enumctr\endcsname}%
+ \let\@item\pl@item
+ \def\makelabel##1{##1}%
+ \ignorespaces}
+\let\endinparaenum\ignorespacesafterend
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{compactenum}
+% \changes{v1.1 (1998/10/18)}{}{Environment added}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Add extra bracket to optional
+% argument}
+% For the |compactenum| environment all vertical skips have to
+% be set to the \cs{pl...} values.
+% \begin{macrocode}
+\def\compactenum{%
+ \ifnum\@enumdepth>\thr@@
+ \@toodeep
+ \else
+ \advance\@enumdepth\@ne
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ \fi
+ \@ifnextchar[{\@enumlabel@{\@compactenum@}[}{\@compactenum@}}
+% \end{macrocode}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Adjustment of label width done in
+% \cs{@compactenum@}}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Set label width according to left
+% margin}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Use \cs{enumlabel}}
+% \changes{v2.3a (2002/03/10)}{2002/03/10}{Use \cs{@listdepth} for $n$ in
+% \cs{leftmargin}$\,n$}
+% The width of the label is adjusted before starting the list if necessary.
+% \begin{macrocode}
+\def\@compactenum@{%
+ \@adjust@enum@labelwidth
+ \expandafter\list\csname label\@enumctr\endcsname{%
+ \usecounter{\@enumctr}%
+ \parsep\plparsep
+ \itemsep\plitemsep
+ \topsep\pltopsep
+ \partopsep\plpartopsep
+ \labelwidth
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \advance\labelwidth-\labelsep
+ \let\makelabel\enumlabel}}
+\let\endcompactenum\endlist
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{enumerate}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Added}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Add extra bracket to optional
+% argument}
+% If the user has requested it, we redefine the |enumerate| environment.
+% \begin{macrocode}
+\if@plnewenum
+ \def\enumerate{%
+ \ifnum \@enumdepth >\thr@@
+ \@toodeep
+ \else
+ \advance\@enumdepth \@ne
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ \fi
+ \@ifnextchar[{\@enumlabel@{\@enumerate@}[}{\@enumerate@}}
+% \end{macrocode}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Adjustment of label width done in
+% \cs{@enumerate@}}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Set label width according to left
+% margin}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Use \cs{enumlabel}}
+% \changes{v2.3a (2002/03/10)}{2002/03/10}{Use \cs{@listdepth} for $n$ in
+% \cs{leftmargin}$\,n$}
+% The width of the label is adjusted before starting the list if necessary.
+% \begin{macrocode}
+ \def\@enumerate@{%
+ \@adjust@enum@labelwidth
+ \expandafter\list\csname label\@enumctr\endcsname{%
+ \usecounter{\@enumctr}%
+ \labelwidth
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \advance\labelwidth-\labelsep
+ \let\makelabel\enumlabel}}
+\fi
+% \end{macrocode}
+% \end{environment}
+%
+% \subsection{Itemized Environments}
+%
+% \begin{environment}{asparaitem}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% This is pretty much the same as |asparaenum|. We just don't need
+% a counter.
+% \begin{macrocode}
+\def\asparaitem{%
+ \ifnum\@itemdepth>\thr@@
+ \@toodeep
+ \else
+ \advance\@itemdepth\@ne
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \fi
+ \@ifnextchar[{\@itemlabel@{\@asparaitem@}}{\@asparaitem@}}
+\def\@asparaitem@{%
+ \expandafter\list\csname\@itemitem\endcsname{%
+ \labelwidth\z@
+ \labelsep.5em
+ \leftmargin\z@
+ \parsep\parskip
+ \itemsep\z@
+ \topsep\z@
+ \partopsep\parskip
+ \itemindent\parindent
+ \advance\itemindent\labelsep
+ \def\makelabel##1{##1}}}
+\let\endasparaitem\endlist
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{inparaitem}
+% \changes{v1.1 (1998/10/18)}{}{Make space after symbol non-breaking}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{Define \cs{makelabel}}
+% Again the same as |inparaenum| without the counter stuff but with an
+% optional argument.
+% \begin{macrocode}
+\def\inparaitem{%
+ \ifnum\@itemdepth>\thr@@
+ \@toodeep
+ \else
+ \advance\@itemdepth\@ne
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \fi
+ \@ifnextchar[{\@itemlabel@{\@inparaitem@}}{\@inparaitem@}}
+\def\@inparaitem@{%
+ \def\@itemlabel{\csname\@itemitem\endcsname}%
+ \let\@item\pl@item
+ \def\makelabel##1{##1}%
+ \ignorespaces}
+\let\endinparaitem\ignorespacesafterend
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{compactitem}
+% \changes{v1.1 (1998/10/18)}{}{Environment added}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% The |compactitem| environment is basically the same as the \LaTeX{}
+% original. All the vertical skips are set to the \cs{pl...} values.
+% \begin{macrocode}
+\def\compactitem{%
+ \ifnum\@itemdepth>\thr@@
+ \@toodeep
+ \else
+ \advance\@itemdepth\@ne
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \fi
+ \@ifnextchar[{\@itemlabel@{\@compactitem@}}{\@compactitem@}}
+% \end{macrocode}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Adjustment of label width done in
+% \cs{@compactitem@}}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Set label width according to left
+% margin}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Use \cs{itemlabel}}
+% \changes{v2.3a (2002/03/10)}{2002/03/10}{Use \cs{@listdepth} for $n$ in
+% \cs{leftmargin}$\,n$}
+% The width of the label is adjusted before starting the list if necessary.
+% \begin{macrocode}
+\def\@compactitem@{%
+ \@adjust@item@labelwidth
+ \expandafter\list\csname\@itemitem\endcsname{%
+ \parsep\plparsep
+ \itemsep\plitemsep
+ \topsep\pltopsep
+ \partopsep\plpartopsep
+ \labelwidth
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \advance\labelwidth-\labelsep
+ \let\makelabel\itemlabel}}
+\let\endcompactitem\endlist
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{itemize}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Added}
+% If the user has requested it, we redefine the |itemize| environment.
+% \begin{macrocode}
+\if@plnewitem
+ \def\itemize{%
+ \ifnum \@itemdepth >\thr@@
+ \@toodeep
+ \else
+ \advance\@itemdepth\@ne
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \fi
+ \@ifnextchar[{\@itemlabel@{\@itemize@}}{\@itemize@}}
+% \end{macrocode}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Adjustment of label width done in
+% \cs{@itemize@}}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Set label width according to left
+% margin}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Use \cs{itemlabel}}
+% \changes{v2.3a (2002/03/10)}{2002/03/10}{Use \cs{@listdepth} for $n$ in
+% \cs{leftmargin}$\,n$}
+% The width of the label is adjusted before starting the list if necessary.
+% \begin{macrocode}
+ \def\@itemize@{%
+ \@adjust@item@labelwidth
+ \expandafter\list\csname\@itemitem\endcsname{%
+ \labelwidth
+ \csname leftmargin\romannumeral\@listdepth\endcsname
+ \advance\labelwidth-\labelsep
+ \let\makelabel\itemlabel}}
+\fi
+% \end{macrocode}
+% \end{environment}
+%
+% \subsection{Descriptive Environments}
+%
+% \begin{environment}{asparadesc}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New environment}
+% A bit easier than |asparaenum| since the label handling is easier.
+% \begin{macrocode}
+\def\asparadesc{%
+ \list{}{%
+ \labelwidth\z@
+ \labelsep.5em
+ \leftmargin\z@
+ \parsep\parskip
+ \itemsep\z@
+ \topsep\z@
+ \partopsep\parskip
+ \itemindent\parindent
+ \advance\itemindent\labelsep
+ \let\makelabel\paradescriptionlabel}}
+\let\endasparadesc\endlist
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{inparadesc}
+% \changes{v2.1 (2001/09/20)}{2001/09/16}{New environment}
+% Again a bit easier than |inparaenum| since the label handling is easier.
+% \begin{macrocode}
+\def\inparadesc{%
+ \let\@itemlabel\@empty
+ \let\@item\pl@item
+ \let\makelabel\paradescriptionlabel
+ \ignorespaces}
+\let\endinparadesc\ignorespacesafterend
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{compactdesc}
+% \changes{v1.1 (1998/10/18)}{}{Environment added}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Rewritten}
+% The |compactdesc| environment is copied from |article.cls| with the skips
+% set to the \cs{pl...} skips.
+% \begin{macrocode}
+\def\compactdesc{%
+ \list{}{%
+ \parsep\plparsep
+ \itemsep\plitemsep
+ \topsep\pltopsep
+ \partopsep\plpartopsep
+ \labelwidth\z@
+ \itemindent-\leftmargin
+ \let\makelabel\descriptionlabel}}
+\let\endcompactdesc\endlist
+% \end{macrocode}
+% \end{environment}
+%
+% \subsection{Blank Environments}
+%
+% \begin{environment}{asparablank}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Added}
+% This list formats its entries as if there was no list. Thus no test for
+% the list depth is performed. To avoid unnecessary white space, \cs{labelsep}
+% is set to zero. If the optional argument of \cs{item} is used, some
+% separating space has to inserted ``by hand''.
+% \begin{macrocode}
+\if@pldefblank
+ \def\asparablank{%
+ \list{}{%
+ \labelwidth\z@
+ \labelsep\z@
+ \leftmargin\z@
+ \parsep\parskip
+ \itemsep\z@
+ \topsep\z@
+ \partopsep\parskip
+ \itemindent\parindent
+ \advance\itemindent\labelsep
+ \def\makelabel##1{##1}}}
+ \let\endasparablank\endlist
+% \end{macrocode}
+% \end{environment}
+% \begin{environment}{inparablank}
+% \changes{v1.2 (1999/01/10)}{1999/01/07}{Added}
+% The |inparablank| environment handles the ``white space problem''
+% automatically.
+% \begin{macrocode}
+ \def\inparablank{%
+ \let\@itemlabel\@empty
+ \let\@item\pl@item
+ \ignorespaces}
+ \let\endinparablank\ignorespacesafterend
+\fi
+% \end{macrocode}
+% \end{environment}
+%
+% \subsection{Setting Defaults}
+%
+% Here are the macros to define the default labels and left margins
+% for itemized and enumerated environments.
+% \begin{macro}{\setdefaultitem}
+% \changes{v2.1 (2001/09/20)}{2001/09/19}{New macro}
+% The macro for the item labels just redefines \cs{labelitem}$\,n$.
+% \begin{macrocode}
+\def\setdefaultitem#1#2#3#4{%
+ \if@empty{#1}{}{\def\labelitemi{#1}}%
+ \if@empty{#2}{}{\def\labelitemii{#2}}%
+ \if@empty{#3}{}{\def\labelitemiii{#3}}%
+ \if@empty{#4}{}{\def\labelitemiv{#4}}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\defaultitem}
+% \changes{v1.4 (1999/01/27)}{1999/01/19}{New macro}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Macro deprecated and only kept for
+% compatibility}
+% This macro is deprecated and only kept for backward compatibility.
+% \begin{macrocode}
+\def\defaultitem{%
+ \PackageWarning{Paralist}{Macro \protect\defaultitem\space
+ deprecated. \MessageBreak Use macro \protect\setdefaultitem
+ \space instead!! \MessageBreak Used}
+ \setdefaultitem}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\setdefaultenum}
+% \changes{v2.1 (2001/09/20)}{2001/09/19}{New macro}
+% \changes{v2.3b (2002/03/18)}{2002/03/18}{Fix handling of flags}
+% The macro to define the enumerated labels uses the same mechanism
+% as the optional argument of the enumerated environments. First, we set
+% \cs{@enumctr} to |enum|$\,n$, then \cs{@enumlabel@} is used to format the
+% counter. As explained above we have to add the extra bracket |[| to avoid
+% losing braces |{}| around the whole argument. Note that the state of
+% \cs{if@alwaysadjust} has to be saved and restored.
+% \begin{macrocode}
+\newif\if@pltemp
+\def\setdefaultenum#1#2#3#4{%
+ \if@plneveradjust\@pltemptrue\else\@pltempfalse\fi
+ \@plneveradjusttrue
+ \if@empty{#1}{}{%
+ \def\@enumctr{enumi}%
+ \@enumlabel@{\relax}[[#1]}%
+ \if@empty{#2}{}{%
+ \def\@enumctr{enumii}%
+ \@enumlabel@{\relax}[[#2]}%
+ \if@empty{#3}{}{%
+ \def\@enumctr{enumiii}%
+ \@enumlabel@{\relax}[[#3]}%
+ \if@empty{#4}{}{%
+ \def\@enumctr{enumiv}%
+ \@enumlabel@{\relax}[[#4]}%
+ \if@pltemp\@plneveradjusttrue\else\@plneveradjustfalse\fi
+ \@plmylabelfalse
+ \relax}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\defaultenum}
+% \changes{v1.4 (1999/01/27)}{1999/01/19}{New macro}
+% \changes{v1.8 (1999/04/29)}{1999/04/28}{Add extra bracket to argument of
+% \cs{@enumlabel@}}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Macro deprecated and only kept for
+% compatibility}
+% This macro is deprecated and only kept for backward compatibility.
+% \begin{macrocode}
+\def\defaultenum{%
+ \PackageWarning{Paralist}{Macro \protect\defaultenum\space
+ deprecated. \MessageBreak Use macro \protect\setdefaultenum
+ \space instead!! \MessageBreak Used}
+ \setdefaultitem}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\setdefaultleftmargin}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{New macro}
+% Finally a macro to define all the left margins for the lists.
+% \begin{macrocode}
+\def\setdefaultleftmargin#1#2#3#4#5#6{%
+ \if@empty{#1}{}{\leftmargini#1}%
+ \if@empty{#2}{}{\leftmarginii#2}%
+ \if@empty{#3}{}{\leftmarginiii#3}%
+ \if@empty{#4}{}{\leftmarginiv#4}%
+ \if@empty{#5}{}{\leftmarginv#5}%
+ \if@empty{#6}{}{\leftmarginvi#6}%
+ \relax}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\defaultleftmargin}
+% \changes{v1.4 (1999/01/27)}{1999/01/19}{New macro}
+% \changes{v2.1 (2001/09/20)}{2001/09/17}{Macro deprecated and only kept for
+% compatibility}
+% This macro is deprecated and only kept for backward compatibility.
+% \begin{macrocode}
+\def\defaultleftmargin#1#2#3#4{%
+ \setdefaultleftmargin{#1}{#2}{#3}{#4}{}{}%
+ \PackageWarning{Paralist}{Macro \protect\defaultleftmargin
+ \space deprecated. \MessageBreak Use macro
+ \protect\setdefaultleftmargin\space instead!!
+ \MessageBreak But note that it has six arguments!
+ \MessageBreak Used}}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Points or no Points?}
+%
+% \begin{macro}{\pl@pointxxxenum}
+% \changes{v2.0a (2001/03/03)}{2001/03/03}{New macro}
+% We define macros for the options \textsf{pointlessenum} and
+% \textsf{pointedenum}. First the common part consisting of the format of the
+% counters itself and the references. The references to an item of level N is
+% generated by using |\p@enumN\theenumN|, so we have to make all |\p@enumN|'s
+% do nothing.
+% \begin{macrocode}
+\def\pl@pointxxxenum{%
+ \def\theenumi{\arabic{enumi}}%
+ \def\theenumii{\theenumi.\arabic{enumii}}%
+ \def\theenumiii{\theenumii.\arabic{enumiii}}%
+ \def\theenumiv{\theenumiii.\arabic{enumiv}}%
+ \def\p@enumi{}%
+ \def\p@enumii{}%
+ \def\p@enumiii{}%
+ \def\p@enumiv{}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\pl@pointedenum}
+% \changes{v2.0a (2001/03/03)}{2001/03/03}{New macro}
+% \begin{macro}{\pl@pointlessenum}
+% \changes{v2.0a (2001/03/03)}{2001/03/03}{New macro}
+% The format of the labels either adds a point or it doesn't.
+% \begin{macrocode}
+\def\pl@pointedenum{%
+ \def\labelenumi{\theenumi.}%
+ \def\labelenumii{\theenumii.}%
+ \def\labelenumiii{\theenumiii.}%
+ \def\labelenumiv{\theenumiv.}}
+\def\pl@pointlessenum{%
+ \def\labelenumi{\theenumi}%
+ \def\labelenumii{\theenumii}%
+ \def\labelenumiii{\theenumiii}%
+ \def\labelenumiv{\theenumiv}}
+% \end{macrocode}
+% \end{macro} \end{macro}
+% \begin{macro}{\pointedenum}
+% \changes{v2.0a (2001/03/03)}{2001/03/03}{New macro}
+% \begin{macro}{\pointlessenum}
+% \changes{v2.0a (2001/03/03)}{2001/03/03}{New macro}
+% Now the user level macros to turn the new feature on.
+% \begin{macrocode}
+\def\pointedenum{\pl@pointxxxenum\pl@pointedenum}
+\def\pointlessenum{\pl@pointxxxenum\pl@pointlessenum}
+% \end{macrocode}
+% \end{macro} \end{macro}
+% The options just use those user level macros globally.
+% \begin{macrocode}
+\if@plpointedenum\pointedenum\fi
+\if@plpointlessenum\pointlessenum\fi
+% \end{macrocode}
+%
+% \subsection{Configuration File}
+%
+% \changes{v1.6 (1999/03/27)}{1999/03/26}{Read configuration file in case it
+% exists}
+% Read the file |paralist.cfg| if it exists and the |nocfg| was not given.
+% \begin{macrocode}
+\if@plloadcfg
+ \InputIfFileExists{paralist.cfg}{%
+ \PackageInfo{Paralist}{%
+ Using the configuration file paralist.cfg}}{}
+\fi
+%</package>
+% \end{macrocode}
+%
+% \Finale
+
+
+
+
+
+
diff --git a/Master/texmf-dist/source/latex/paralist/paralist.ins b/Master/texmf-dist/source/latex/paralist/paralist.ins
new file mode 100644
index 00000000000..86faa2e1a82
--- /dev/null
+++ b/Master/texmf-dist/source/latex/paralist/paralist.ins
@@ -0,0 +1,38 @@
+% File paralist.ins
+% Copyright 1998-2002 Bernd Schandl
+% email schandl@gmx.net
+% www http://schandl.gmxhome.de/paralist
+%
+% Installation file for the paralist package.
+%
+% See the README file for instructions.
+%
+% This file can be redistributed and/or modified under the terms
+% of the LaTeX Project Public License distributed from CTAN
+% archives in the directory macros/latex/base/lppl.txt; either
+% version 1 of the license, or (at your option) any later version.
+%
+\input docstrip
+\keepsilent
+
+% define preamble
+\preamble
+
+Copyright 1998-2002 Bernd Schandl
+email schandl@gmx.net
+www http://schandl.gmxhome.de/paralist
+
+This file can be redistributed and/or modified under the terms
+of the LaTeX Project Public License distributed from CTAN
+archives in the directory macros/latex/base/lppl.txt; either
+version 1 of the license, or (at your option) any later version.
+
+\endpreamble
+
+
+\generate{%
+ \file{paralist.sty}{\from{paralist.dtx}{package}}%
+ \usepostamble\empty
+ \file{paralist.drv}{\from{paralist.dtx}{driver}}}
+
+\endbatchfile