summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Build/source/texk/dvipdfmx/ChangeLog6
-rw-r--r--Build/source/texk/dvipdfmx/data/dvipdfmx.cfg4
-rw-r--r--Build/source/texk/dvipdfmx/src/dvipdfmx.c12
-rw-r--r--Build/source/texk/xdvipdfmx/ChangeLog8
-rw-r--r--Build/source/texk/xdvipdfmx/Makefile.am4
-rw-r--r--Build/source/texk/xdvipdfmx/Makefile.in2
-rw-r--r--Build/source/texk/xdvipdfmx/data/dvipdfmx.cfg33
-rw-r--r--Build/source/texk/xdvipdfmx/src/Makefile.am4
-rw-r--r--Build/source/texk/xdvipdfmx/src/Makefile.in2
-rw-r--r--Build/source/texk/xdvipdfmx/src/dvipdfmx.c19
10 files changed, 56 insertions, 38 deletions
diff --git a/Build/source/texk/dvipdfmx/ChangeLog b/Build/source/texk/dvipdfmx/ChangeLog
index a82eceafcb2..80c9c0b7637 100644
--- a/Build/source/texk/dvipdfmx/ChangeLog
+++ b/Build/source/texk/dvipdfmx/ChangeLog
@@ -1,3 +1,9 @@
+2013-04-30 Peter Breitenlohner <peb@mppmu.mpg.de>
+
+ * src/dvipdfmx.c: Default is not to cache image files.
+ Must not cast command line value to 'unsigned'.
+ * data/dvipdfmx.cfg (I): Now -1 is the program default.
+
2013-04-30 Karl Berry <karl@tug.org>
* data/dvipdfmx.cfg (D): back to using -dEPSCrop instead of
diff --git a/Build/source/texk/dvipdfmx/data/dvipdfmx.cfg b/Build/source/texk/dvipdfmx/data/dvipdfmx.cfg
index d0c021bc84c..3aca31fd2ed 100644
--- a/Build/source/texk/dvipdfmx/data/dvipdfmx.cfg
+++ b/Build/source/texk/dvipdfmx/data/dvipdfmx.cfg
@@ -193,7 +193,7 @@ D "rungs -q -dNOPAUSE -dBATCH -dEPSCrop -sDEVICE=pdfwrite -dCompatibilityLevel=
%% Image cache life in hours
%% 0 means erase all old images and leave new images
%% -1 means erase all old images and also erase new images
-I -1
+%I -1
%% Font Map Files
%%
@@ -207,7 +207,7 @@ f pdftex.map
%% MiKTeX 2.2 and 2.3
%f psfonts.map
-%% Put additonal fontmap files here (usually for Type0 fonts)
+%% Put additional fontmap files here (usually for Type0 fonts)
%f cid-x.map
% the following file is generated by updmap(-sys) from the
diff --git a/Build/source/texk/dvipdfmx/src/dvipdfmx.c b/Build/source/texk/dvipdfmx/src/dvipdfmx.c
index 7dbd7de9769..91371e5713a 100644
--- a/Build/source/texk/dvipdfmx/src/dvipdfmx.c
+++ b/Build/source/texk/dvipdfmx/src/dvipdfmx.c
@@ -2,7 +2,7 @@
This is DVIPDFMx, an eXtended version of DVIPDFM by Mark A. Wicks.
- Copyright (C) 2009-2012 by Jin-Hwan Cho, Matthias Franz, and Shunsaku Hirata,
+ Copyright (C) 2009-2013 by Jin-Hwan Cho, Matthias Franz, and Shunsaku Hirata,
the dvipdfmx project team.
Copyright (C) 1998, 1999 by Mark A. Wicks <mwicks@kettering.edu>
@@ -89,7 +89,7 @@ static int pdfdecimaldigits = 2;
/* Image cache life in hours */
/* 0 means erase all old images and leave new images */
/* -1 means erase all old images and also erase new images */
-static int image_cache_life = 48;
+static int image_cache_life = -1;
/* Encryption */
static int do_encryption = 0;
@@ -146,7 +146,7 @@ show_version (void)
fprintf(stdout, "\nThis is %s-%s by the DVIPDFMx project team,\n", PACKAGE, VERSION);
fprintf(stdout, "modified for TeX Live,\n");
fprintf(stdout, "an extended version of dvipdfm-0.13.2c developed by Mark A. Wicks.\n");
- fprintf(stdout, "\nCopyright (C) 2002-2012 by the DVIPDFMx project team\n");
+ fprintf(stdout, "\nCopyright (C) 2002-2013 by the DVIPDFMx project team\n");
fprintf(stdout, "\nThis is free software; you can redistribute it and/or modify\n");
fprintf(stdout, "it under the terms of the GNU General Public License as published by\n");
fprintf(stdout, "the Free Software Foundation; either version 2 of the License, or\n");
@@ -186,7 +186,7 @@ show_usage (void)
fprintf(stdout, "\t\tAnd negative values replace old values.\n");
fprintf(stdout, "-D template\tPS->PDF conversion command line template [none]\n");
fprintf(stdout, "-E \t\tEnable DVIPDFM emulation mode\n");
- fprintf(stdout, "-I number\tImage cache life in hours [48]\n");
+ fprintf(stdout, "-I number\tImage cache life in hours [-1]\n");
fprintf(stdout, " \t 0: erase all old images and leave new images\n");
fprintf(stdout, " \t-1: erase all old images and also erase new images\n");
fprintf(stdout, "-K number\tEncryption key length [40]\n");
@@ -539,7 +539,7 @@ do_args (int argc, char *argv[])
break;
case 'I':
CHECK_ARG(1, "image cache life in hours");
- image_cache_life = (unsigned) atoi(argv[1]);
+ image_cache_life = atoi(argv[1]);
POP_ARG();
break;
case 'S':
@@ -613,7 +613,7 @@ do_args (int argc, char *argv[])
} else if (argc > 0) {
/*
* The only legitimate way to have argc == 0 here is
- * is do_args was called from config file. In that case, there is
+ * do_args was called from config file. In that case, there is
* no dvi file name. Check for that case .
*/
if (!mp_mode && STRN_CMP(".dvi", argv[0] + strlen(argv[0]) - 4, 4)) {
diff --git a/Build/source/texk/xdvipdfmx/ChangeLog b/Build/source/texk/xdvipdfmx/ChangeLog
index 5f1fb3c1e4b..a6c9532e6a6 100644
--- a/Build/source/texk/xdvipdfmx/ChangeLog
+++ b/Build/source/texk/xdvipdfmx/ChangeLog
@@ -1,3 +1,11 @@
+2013-04-30 Peter Breitenlohner <peb@mppmu.mpg.de>
+
+ * src/dvipdfmx.c: Default is not to cache image files.
+ Must not cast command line value to 'unsigned'.
+ * data/dvipdfmx.cfg: Synch with ../dvipdfmx/.
+
+ * Makefile.am, src/Makefile.am: Fixed a typo.
+
2013-03-28 Akira Kakuto <kakuto@fuk.kindai.ac.jp>
* src/dpxfile.c, src/spc_dvips.c: Recover dpx_create_temp_file()
diff --git a/Build/source/texk/xdvipdfmx/Makefile.am b/Build/source/texk/xdvipdfmx/Makefile.am
index a796b7dc735..414240cc327 100644
--- a/Build/source/texk/xdvipdfmx/Makefile.am
+++ b/Build/source/texk/xdvipdfmx/Makefile.am
@@ -1,6 +1,6 @@
## Makefile.am for the TeX Live subdirectory texk/xdvipdfmx/
##
-## Copyright (C) 2009-2012 Peter Breitenlohner <tex-live@tug.org>
+## Copyright (C) 2009-2013 Peter Breitenlohner <tex-live@tug.org>
## You may freely use, modify and/or distribute this file.
##
ACLOCAL_AMFLAGS = -I ../../m4
@@ -9,7 +9,7 @@ SUBDIRS = . src
all-local: config.force
-config.force: $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(LIBPNG_FREETYPE2) $(KPATHSEA_DEPEND)
+config.force: $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(FREETYPE2_DEPEND) $(KPATHSEA_DEPEND)
echo timestamp >config.force
$(SHELL) ./config.status --recheck
diff --git a/Build/source/texk/xdvipdfmx/Makefile.in b/Build/source/texk/xdvipdfmx/Makefile.in
index 2275129ea8e..a35baaab128 100644
--- a/Build/source/texk/xdvipdfmx/Makefile.in
+++ b/Build/source/texk/xdvipdfmx/Makefile.in
@@ -803,7 +803,7 @@ uninstall-am:
all-local: config.force
-config.force: $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(LIBPNG_FREETYPE2) $(KPATHSEA_DEPEND)
+config.force: $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(FREETYPE2_DEPEND) $(KPATHSEA_DEPEND)
echo timestamp >config.force
$(SHELL) ./config.status --recheck
diff --git a/Build/source/texk/xdvipdfmx/data/dvipdfmx.cfg b/Build/source/texk/xdvipdfmx/data/dvipdfmx.cfg
index afa3b843e16..3aca31fd2ed 100644
--- a/Build/source/texk/xdvipdfmx/data/dvipdfmx.cfg
+++ b/Build/source/texk/xdvipdfmx/data/dvipdfmx.cfg
@@ -1,4 +1,4 @@
-%% dvipdfmx.cfg for dvipdfmx. (Public domain.)
+%% dvipdfmx.cfg for dvipdfmx and xdvipdfmx. (Public domain.)
%%
%% PDF Version Setting
%%
@@ -129,13 +129,10 @@ P 0x003C
%% encoded images (which is possible in PS level 2), then these images
%% will also be re-encoded using Flate. To turn the conversion off,
%% simply remove the options mentioned above.
-%%
-%% Also note that PAPERSIZE=a0 is specified below. This converts PS
-%% files (including EPS) to A0 papersize PDF. This is necessary to
-%% prevent gs from clipping PS figure at some papersize. (A0 above
-%% simply means large size paper.) If you have figures even larger
-%% than A0, and their llx=lly=0, you can use "-dEPSCrop" instead of
-%% "-sPAPERSIZE=a0"
+%%
+%% The -dEPSCROP below converts PS files. Before TL 2013,
+%% -sPAPERSIZE=a0 was used for this. In 2013, changes were made to
+%% xetex.def, dvipdfmx.def, etc., to handle non-zero llx/lly.
%%
%% In TeX Live, we use the rungs wrapper instead of ps2pdf, becuse we
%% must omit the -dSAFER which ps2pdf specifies: in order for pstricks
@@ -148,22 +145,31 @@ P 0x003C
%% Incidentally, especially in TL, more than one dvipdfmx.cfg may be
%% extant. You can find the one that is active by running:
%% kpsewhich -progname=dvipdfmx -format='other text files' dvipdfmx.cfg
+%% and control which one is found by setting DVIPDFMXINPUTS.
%%
-D "rungs -q -dNOPAUSE -dBATCH -sPAPERSIZE=a0 -sDEVICE=pdfwrite -dCompatibilityLevel=%v -dAutoFilterGrayImages=false -dGrayImageFilter=/FlateEncode -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -sOutputFile='%o' '%i' -c quit"
+D "rungs -q -dNOPAUSE -dBATCH -dEPSCrop -sDEVICE=pdfwrite -dCompatibilityLevel=%v -dAutoFilterGrayImages=false -dGrayImageFilter=/FlateEncode -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -sOutputFile='%o' '%i' -c quit"
+
+% pre-2013 invocation using -sPAPERSIZE instead of -dEPSCrop, no other changes:
+%D "rungs -q -dNOPAUSE -dBATCH -sPAPERSIZE=a0 -sDEVICE=pdfwrite -dCompatibilityLevel=%v -dAutoFilterGrayImages=false -dGrayImageFilter=/FlateEncode -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -sOutputFile='%o' '%i' -c quit"
+% other random ps converters people have experimented with.
+%D "/usr/local/bin/ps2pdf -dEPSCrop '%i' '%o'"
+%D "/usr/texbin/epstopdf '%i' -o '%o'"
+%D "/usr/bin/pstopdf '%i' -o '%o'"
+%
%% Frank Siegert's PStill:
%D "/usr/local/bin/pstill -c -o '%o' '%i'"
-
+%
%% Batik + Fop (SVG-to-PDF):
%% If you want both PS and SVG, you need to write a script or program
%% that selectively invokes converters.
%D "java -classpath classpaths -jar /path/to/batik-rasterizer.jar -m application/pdf -d '%o' '%i'"
-
+%
%% There are no way to directly know suggested size of (raster) images.
%% You may want to use %b here, since you can try reading the ebb file
%% to see what is natural (physical) size of images.
%D "ras2pdf -r 300x300 -b '%b.bb' -o '%o' '%i'"
-
+%
%% ImageMagick:
%% Easiest way to support various file formats.
%D "convert '%i' 'epdf:%o'"
@@ -187,7 +193,7 @@ D "rungs -q -dNOPAUSE -dBATCH -sPAPERSIZE=a0 -sDEVICE=pdfwrite -dCompatibilityL
%% Image cache life in hours
%% 0 means erase all old images and leave new images
%% -1 means erase all old images and also erase new images
-%I 48
+%I -1
%% Font Map Files
%%
@@ -207,7 +213,6 @@ f pdftex.map
% the following file is generated by updmap(-sys) from the
% KanjiMap entries in the updmap.cfg file.
f kanjix.map
-
% minimal example for Chinese and Korean users
% improvements please to tex-live@tug.org
f ckx.map
diff --git a/Build/source/texk/xdvipdfmx/src/Makefile.am b/Build/source/texk/xdvipdfmx/src/Makefile.am
index 6ff201801fa..367e2f35a57 100644
--- a/Build/source/texk/xdvipdfmx/src/Makefile.am
+++ b/Build/source/texk/xdvipdfmx/src/Makefile.am
@@ -1,6 +1,6 @@
## Makefile.am for the TeX Live subdirectory texk/xdvipdfmx/src/
##
-## Copyright (C) 2009-2012 Peter Breitenlohner <tex-live@tug.org>
+## Copyright (C) 2009-2013 Peter Breitenlohner <tex-live@tug.org>
## You may freely use, modify and/or distribute this file.
##
AM_CPPFLAGS = $(KPATHSEA_INCLUDES) $(FREETYPE2_INCLUDES) $(LIBPNG_INCLUDES) $(ZLIB_INCLUDES)
@@ -33,7 +33,7 @@ xdvipdfmx_SOURCES = \
type0.h t1_char.h t1_load.h type1.h type1c.h \
unicode.h vf.h xbb.h
-xdvipdfmx_DEPENDENCIES = $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(LIBPNG_FREETYPE2) $(KPATHSEA_DEPEND)
+xdvipdfmx_DEPENDENCIES = $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(FREETYPE2_DEPEND) $(KPATHSEA_DEPEND)
LDADD = $(KPATHSEA_LIBS) $(FREETYPE2_LIBS) $(LIBPNG_LIBS) $(ZLIB_LIBS)
diff --git a/Build/source/texk/xdvipdfmx/src/Makefile.in b/Build/source/texk/xdvipdfmx/src/Makefile.in
index 52b87e3f67c..6d8d1e04ccb 100644
--- a/Build/source/texk/xdvipdfmx/src/Makefile.in
+++ b/Build/source/texk/xdvipdfmx/src/Makefile.in
@@ -326,7 +326,7 @@ xdvipdfmx_SOURCES = \
type0.h t1_char.h t1_load.h type1.h type1c.h \
unicode.h vf.h xbb.h
-xdvipdfmx_DEPENDENCIES = $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(LIBPNG_FREETYPE2) $(KPATHSEA_DEPEND)
+xdvipdfmx_DEPENDENCIES = $(ZLIB_DEPEND) $(LIBPNG_DEPEND) $(FREETYPE2_DEPEND) $(KPATHSEA_DEPEND)
LDADD = $(KPATHSEA_LIBS) $(FREETYPE2_LIBS) $(LIBPNG_LIBS) $(ZLIB_LIBS)
all: all-am
diff --git a/Build/source/texk/xdvipdfmx/src/dvipdfmx.c b/Build/source/texk/xdvipdfmx/src/dvipdfmx.c
index 932237574d3..ac82c2cdf56 100644
--- a/Build/source/texk/xdvipdfmx/src/dvipdfmx.c
+++ b/Build/source/texk/xdvipdfmx/src/dvipdfmx.c
@@ -1,13 +1,12 @@
/*
- This is xdvipdfmx, an extended version of...
+ This is xdvipdfmx, an extended version of...
- DVIPDFMx, an eXtended-2012 version of DVIPDFM by Mark A. Wicks.
+ DVIPDFMx, an eXtended-2013 version of DVIPDFM by Mark A. Wicks.
- Copyright (c) 2006 SIL.
- (xdvipdfmx extensions for XeTeX support)
+ Copyright (c) 2006 SIL. (xdvipdfmx extensions for XeTeX support)
- Copyright (C) 2008 by Jin-Hwan Cho, Matthias Franz, and Shunsaku Hirata,
+ Copyright (C) 2008-2013 by Jin-Hwan Cho, Matthias Franz, and Shunsaku Hirata,
the DVIPDFMx project team.
Copyright (C) 1998, 1999 by Mark A. Wicks <mwicks@kettering.edu>
@@ -92,7 +91,7 @@ static int pdfdecimaldigits = 2;
/* Image cache life in hours */
/* 0 means erase all old images and leave new images */
/* -1 means erase all old images and also erase new images */
-static int image_cache_life = 48;
+static int image_cache_life = -1;
/* Encryption */
static int do_encryption = 0;
@@ -156,7 +155,7 @@ usage (int exit_code)
fprintf (stdout, "\nThis is %s-%s by Jonathan Kew and Jin-Hwan Cho,\n", PACKAGE, VERSION);
fprintf (stdout, "an extended version of DVIPDFMx, which in turn was\n");
fprintf (stdout, "an extended version of dvipdfm-0.13.2c developed by Mark A. Wicks.\n");
- fprintf (stdout, "\nCopyright (c) 2006-2011 SIL International and Jin-Hwan Cho.\n");
+ fprintf (stdout, "\nCopyright (c) 2006-2013 SIL International and Jin-Hwan Cho.\n");
fprintf (stdout, "\nThis is free software; you can redistribute it and/or modify\n");
fprintf (stdout, "it under the terms of the GNU General Public License as published by\n");
fprintf (stdout, "the Free Software Foundation; either version 2 of the License, or\n");
@@ -191,7 +190,7 @@ usage (int exit_code)
fprintf (stdout, "\t\tAnd negative values replace old values.\n");
fprintf (stdout, "-D template\tPS->PDF conversion command line template [none]\n");
fprintf (stdout, "-E \t\tAlways try to embed fonts, regardless of licensing flags.\n");
- fprintf (stdout, "-I number\tImage cache life in hours [48]\n");
+ fprintf (stdout, "-I number\tImage cache life in hours [-1]\n");
fprintf (stdout, " \t 0: erase all old images and leave new images\n");
fprintf (stdout, " \t-1: erase all old images and also erase new images\n");
fprintf (stdout, "-K number\tEncryption key length [40]\n");
@@ -534,7 +533,7 @@ do_args (int argc, char *argv[])
break;
case 'I':
CHECK_ARG(1, "image cache life in hours");
- image_cache_life = (unsigned) atoi(argv[1]);
+ image_cache_life = atoi(argv[1]);
POP_ARG();
break;
case 'S':
@@ -599,7 +598,7 @@ do_args (int argc, char *argv[])
} else if (argc > 0) {
/*
* The only legitimate way to have argc == 0 here is
- * is do_args was called from config file. In that case, there is
+ * do_args was called from config file. In that case, there is
* no dvi file name. Check for that case .
*/
dvi_filename = NEW(strlen(argv[0]) + 5, char); /* space to append .dvi */