diff options
author | Karl Berry <karl@freefriends.org> | 2011-04-24 23:31:59 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2011-04-24 23:31:59 +0000 |
commit | f9d18897d7a7bf8f10e01baf78d3e4b27aeaa76d (patch) | |
tree | eefbe60c4edde3f4f73298222788d43c3638f178 | |
parent | 8dd7bc6d55bbbb7491c38f536868588c563d20b6 (diff) |
rm eurofont, support for nonfree fonts from Adobe, and/or old nonfree latex notices, and/or obsolete versions
git-svn-id: svn://tug.org/texlive/trunk@22193 c570f23f-e606-0410-a88d-b1316a301751
33 files changed, 1 insertions, 6582 deletions
diff --git a/Master/texmf-dist/doc/fonts/eurofont/README.europs b/Master/texmf-dist/doc/fonts/eurofont/README.europs deleted file mode 100644 index f59e98140ac..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/README.europs +++ /dev/null @@ -1,156 +0,0 @@ -Adobe's Euro currency fonts for LaTeX -===================================== - -[ Note: this Europs package has been merged with the fonts/euro package -so the paths in this documentation aren't correct any more. You find all -support files apart from the Adobe fonts itself in the directory -CTAN:/tex-archive/fonts/euro. - -Reinhard Zierke, 09-Aug-1999 ] - - -1. Introduction ---------------- - -This is yet another attempt to provide the Euro currency symbol for LaTeX. -There are already several solutions, but each with limited possibilities: - - - The package marvosym (by Thomas Henlich) provides a PostScript font with - four glyphs: The official Euro symbol, and three not-so-official shapes - which are more convenient when using the symbol together with Times, - Helvetica or Courier. - - - The package eurosym (by Henrik Theiling) provides the Euro symbol in - several shapes, among them one that is constructed from the exact - specifications. The font itself is done with Metafont, which is not - a problem by itself. But if you want to create PDFs containing the Euro - symbol, you're bound for trouble. - - - Finally, there is a set of tfm files for Adobe's Euro fonts, which were - placed on CTAN on behalf of Y&Y. The included (plain) TeX-example works, - but leaves much to be desired. - - -2. This Package ---------------- - -So, several solutions, but every single one has it's drawbacks. So I decided -to try to hack something together, and that's what I came up with: - - - I use the twelve fonts distributed by Adobe, as the Y&Y package does. - - - The font names conform to Karl Berry's naming scheme. The following - list gives the PostScript names and the corresponding TeX names. The - two other file names in the list are used later: - - PostScript TeX PC Macintosh - - EuroSans-Regular zpeurs.pfb _1______.PFB EuroSanReg - EuroSans-Italic zpeuris.pfb _1I_____.PFB EuroSanIta - EuroSans-Bold zpeubs.pfb _1B_____.PFB EuroSanBol - EuroSans-BoldItalic zpeubis.pfb _1BI____.PFB EuroSanBolIta - - EuroSerif-Regular zpeur.pfb _3______.PFB EuroSerReg - EuroSerif-Italic zpeuri.pfb _3I_____.PFB EuroSerIta - EuroSerif-Bold zpeub.pfb _3B_____.PFB EuroSerBol - EuroSerif-BoldItalic zpeubi.pfb _3BI____.PFB EuroSerBolIta - - EuroMono-Regular zpeurt.pfb _2______.PFB EuroMonReg - EuroMono-Italic zpeurit.pfb _2I_____.PFB EuroMonIta - EuroMono-Bold zpeubt.pfb _2B_____.PFB EuroMonBol - EuroMono-BoldItalic zpeubit.pfb _2BI____.PFB EuroMonBolIta - - - I have included fd files, so that within each of the three font families - the usual NFSS commands for changing series and shape work. - - - The file europs.sty defines five commands for selecting the Euro symbol: - - \EURhv selects EuroSans - \EURtm selects EuroSerif - \EURcr selects EuroMono - \EUR selects one of the three above, depending on the current - context - \EURofc selects EuroSans Regular independent of context - N.B.: This is the only "official" Euro symbol. If you - want to conform with the rules of the EU (or - whoever), you may only use this symbol. - - The first four names are stolen from marvosym. Although the association - with Helvetica, Times and Courier is not necessarily intelligent, these - names are easy to remember. - -So, you can simply say - - \textsf{just my 2 \EUR} - \textbf{\textit{just my 2 \EUR}} - -and you get the symbol you expect. - - -3. Installation ---------------- - -This archive consists of the following files: - - dvips - zpeu.map - pdftex - zpeu.pdfmap - tex - europs.dtx europs.ins - eutest.ps eutest.tex - tfm - zpeub.tfm zpeubi.tfm zpeubis.tfm zpeubit.tfm - zpeubs.tfm zpeubt.tfm zpeur.tfm zpeuri.tfm - zpeuris.tfm zpeurit.tfm zpeurs.tfm zpeurt.tfm - -Install the tfm files in the appropriate place, depending on your TeX version. - -You will need the Type 1 files from Adobe. For legal reasons they cannot be -included in this package. You have to fetch them personally, e.g. from - - http://www.adobe.com/type/eurofont.html - -or - - ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe - ftp://ftp.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx - -You can either unpack one of these archives on an appropriate computer, or -you can use the freely distributable "unzip" to extract the files from the -file "eurofont.exe". Once you've done this, you have to rename the fonts -according to the table shown above, i.e. _1______.PFB is renamed to -zpeurs.pfb, and so on. If you have downloaded and unpacked the Macintosh -archive, you have to extract the POST part from the resource fork of the -fonts. This can e.g. be done with the program "macfont". It is available -at your nearest CTAN mirror. Once you got the PFB files, put them into the -type1 directory of your TeX installation. - -Append(!!) zpeu.map to psfonts.map, and, if you are using pdfTeX, zpeu.pdfmap -to the appropriate mapping file, so that dvips and pdfTeX know how to handle -these fonts. Note: dvips prior to 5.80 has problems with partial font -downloading in general, and with Adobe's Euro fonts in particular. You can -say "dvips -j0 ..." to switch off partial font downloading completely, but -this may increase the size of the generated PostScript file. You should -really get the most recent version of dvips, which can be found at - - http://www.radicaleye.com/ - -Most TeX distributions include new versions of the individual programs quite -fast, so you may want to check your distribution for a recent version of -dvips. - -Process europs.ins with TeX or LaTeX. This will produce a style file and -three font definition files. Move them to a place where LaTeX can find them. - -Now you should be able to use the Euro currency symbol. - - -4. Bugs -------- - -Probably many. If you find one, or want a feature to be added, please contact - - Joern Clausen - University of Bielefeld, Faculty of Technology - joern@TechFak.Uni-Bielfeld.DE diff --git a/Master/texmf-dist/doc/fonts/eurofont/README.eurosans b/Master/texmf-dist/doc/fonts/eurofont/README.eurosans deleted file mode 100644 index e20363f1556..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/README.eurosans +++ /dev/null @@ -1,149 +0,0 @@ -============================================================ - The LaTeX package eurosans - version 3.0 -============================================================ - Walter Schmidt - was@VR-Web.de - 2002-01-09 - -Usage ------ -The LaTeX package "eurosans" provides a convenient LaTeX -interface for the free Adobe Euro symbol fonts in Type 1 -(PostScript) format. Loading of the package - - \usepackage{eurosans} - -provides a new command - - \euro - -which typesets an Euro symbol. The weight (medium or -boldface), shape (upright or oblique) and width (regular or -condensed) varies according to the font currently selected. -The symbol blends well with most typefaces, except for -typewriter fonts. The medium/upright/regular variant meets -the official design by the EC. - -The Euro Fonts can be scaled, in order to match the other -fonts in the document, by loading the package with the -option [scaled=...]. For instance, to use the Euro fonts at -90% of their `natural' size: - - \usepackage[scaled=0.9]{eurosans} - -The eurosans package requires the package keyval.sty, which -is part of the `graphics' bundle and should be available -with any decent LaTeX system. - - - -The font family "eurosans" --------------------------- -The command \euro switches to a particular font family named -"eurosans", which is set up with the encoding "U" only. - -NFSS classification: - - series shapes PostScript FontName - -------------------------------------------------------- - m n,it,sl EuroSans-Regular, EuroSans-Italic - b,bx n,it,sl EuroSans-Bold, EuroSans-BoldItalic - mc n,it,sl EuroMono-Regular, EuroMono-Italic - sbc,bc n,it,sl EuroMono-Bold, EuroMono-BoldItalic - -(The EuroMono typefaces are actually condensed versions of -EuroSans.) - - - -Obtaning and installing the Euro Fonts --------------------------------------- - -(1) Install the font metrics (.tfm files), to be found in -the CTAN directory fonts/euro/tfm. - -(2) Install a font map file for dvips, pdfTeX etc, to be found -in the CTAN directory fonts/euro/dvips. - -A font map file and the .tfm files for the Euro fonts may -already be provided in your TeX system, so that you need not -install them manually; please, consult its documentation! - -(3) Due to legal reasons, the actual Type1 fonts (.pfb and -.afm files) are _not_ distributed from CTAN. They can be -obtained from free from Adobe: - - <http://www.adobe.com/type/eurofont.html> - -You will receive a self-extracting archive "eurofont.exe" for -DOS/Win, which can be unpacked using Info-Zip's "unzip" -program, too. The archive file can also be downloaded -immediately: - - ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe - ftp://ftp-pac.adobe.com/pub/adobe/type/win/all/eurofont.exe - -(4) Move the .pfb and .afm files from the archive to a -suitable directory of your TeX system. When using the map -file "zpeu.map", you also have to rename the files as -follows: - - _1______.PFB -> zpeurs.pfb - _1B_____.PFB -> zpeubs.pfb - _1I_____.PFB -> zpeuris.pfb - _1BI____.PFB -> zpeubis.pfb - _2______.PFB -> zpeurt.pfb - _2B_____.PFB -> zpeubt.pfb - _2I_____.PFB -> zpeurit.pfb - _2BI____.PFB -> zpeubit.pfb - _3______.PFB -> zpeur.pfb - _3B_____.PFB -> zpeub.pfb - _3I_____.PFB -> zpeuri.pfb - _3BI____.PFB -> zpeubi.pfb - -...and ditto for the .AFM files! - -When using the map file "zpeu-origname.map", you need NOT -rename the files; however, on Unix you should make sure that -the names are lower case. - - - -Known problems --------------- -With dvips prior to version 5.83, partial font downloading -will fail with an error message like this one: - - File <_1bi____.pfb> ended before all chars have been found - We scan 0 Chars from 226 - Lst seen token was '/Euro' - -Partial font downloading can be turned off by calling dvips -with the option -j0 or by specifying j0 in the dvips -configuration file. - -This bug has been fixed with dvips version 5.83. - - - -History -------- -v3.0 2002-01-09 - optional scaling - -v2.1 2000-06-15 - the EuroMono fonts are used for the condensed series - -v2.0 1999-07-21 - changed the font names acording to "Karl Berry" scheme - -v1.0 1999-01-19 - \euro is now robust; - documentation update - -v0.9 1998-11-09 - first public version - - --- finis diff --git a/Master/texmf-dist/doc/fonts/eurofont/dvidrive.txt b/Master/texmf-dist/doc/fonts/eurofont/dvidrive.txt deleted file mode 100644 index 05bb1bb5013..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/dvidrive.txt +++ /dev/null @@ -1,189 +0,0 @@ -%% LaTeX2e file `dvidrive.txt' -%% generated by the `filecontents' environment -%% from source `eurofont' on 1999/02/02. -%% -File dvidrive.txt -Copyright 1998 Rowland McDonnell -email rebecca@astrid.u-net.com - - -This file contains information on how to configure dvips and OzTeX to use -Adobe's Eurofonts and the Marvosym fount. I believe that pdfTeX can use -dvips entries. - -If there are any problems with the information below, or if you have -information on how to configure other dvi drivers, please let me know by -emailing: rebecca@astrid.u-net.com - - -DVI DRIVER CONFIGURATION LINES FOR ADOBE'S EUROFONTS -==================================================== - -Note that versions of dvips before v5.83 have trouble doing partial fount -downloading with Adobe's Eurofonts. Because of this, I have listed the -dvips psfont.map entries with `|<<|' and with `|<|': the `|<<|' -entries prevent dvips attempting to do partial fount downloading with -that particular fount. - -The `<<' syntax does not work with all versions of dvips; it does work -with dvips v5.78, but doesn't work with v5.70. If you're using a pre -`<<' dvips, you should use the entries with `<' and don't use partial -fount downloading with any document containing Adobe's Eurofonts; -passing the -j0 switch to dvips will prevent it from doing partial -fount downloading if this is normally turned on. - -I've asked the author of dvips when the `<<' syntax was first -introduced, and he can't remember. - -I am told that pdftex can do partial fount downloading using Adobe's -Eurofonts. - -Eurofont configuration lines for Windows/Unix/any others? -========================================================= - -(you need to re-name the *.PFB files *.pfb; thanks to Stefan Ulrich -<ulrich@cis.uni-muenchen.de> for this and the following entries) - - -psfonts.map entries for Windows/Unix/other -dvips v5.78 or similar - -zpeurs EuroSans-Regular <<_1______.pfb -zpeubs EuroSans-Bold <<_1B_____.pfb -zpeuris EuroSans-Italic <<_1I_____.pfb -zpeubis EuroSans-BoldItalic <<_1BI____.pfb -zpeurt EuroMono-Regular <<_2______.pfb -zpeubt EuroMono-Bold <<_2B_____.pfb -zpeurit EuroMono-Italic <<_2I_____.pfb -zpeubit EuroMono-BoldItalic <<_2BI____.pfb -zpeur EuroSerif-Regular <<_3______.pfb -zpeub EuroSerif-Bold <<_3B_____.pfb -zpeuri EuroSerif-Italic <<_3I_____.pfb -zpeubi EuroSerif-BoldItalic <<_3BI____.pfb - - -psfonts.map entries for Windows/Unix/other -dvips v5.70 or before, dvips v5.83 and above, and pdftex: - -(note that I don't use pdftex; this suggestion might not work) - -zpeurs EuroSans-Regular <_1______.pfb -zpeubs EuroSans-Bold <_1B_____.pfb -zpeuris EuroSans-Italic <_1I_____.pfb -zpeubis EuroSans-BoldItalic <_1BI____.pfb -zpeurt EuroMono-Regular <_2______.pfb -zpeubt EuroMono-Bold <_2B_____.pfb -zpeurit EuroMono-Italic <_2I_____.pfb -zpeubit EuroMono-BoldItalic <_2BI____.pfb -zpeur EuroSerif-Regular <_3______.pfb -zpeub EuroSerif-Bold <_3B_____.pfb -zpeuri EuroSerif-Italic <_3I_____.pfb -zpeubi EuroSerif-BoldItalic <_3BI____.pfb - - -Eurofont configuration lines for Macs -===================================== - - -Macintosh psfonts.map entries for dvips v5.78 or similar - -zpeur EuroSerif-Regular <<EuroSerReg -zpeuri EuroSerif-Italic <<EuroSerIta -zpeub EuroSerif-Bold <<EuroSerBol -zpeubi EuroSerif-BoldItalic <<EuroSerBolIta -zpeurs EuroSans-Regular <<EuroSanReg -zpeuris EuroSans-Italic <<EuroSanIta -zpeubs EuroSans-Bold <<EuroSanBol -zpeubis EuroSans-BoldItalic <<EuroSanBolIta -zpeurt EuroMono-Regular <<EuroMonReg -zpeurit EuroMono-Italic <<EuroMonIta -zpeubt EuroMono-Bold <<EuroMonBol -zpeubit EuroMono-BoldItalic <<EuroMonBolIta - - -Macintosh psfonts.map entries for -dvips v5.70 or before, dvips v5.83 and above, and pdftex: - -(note that I don't use pdftex; this suggestion might not work) - -zpeur EuroSerif-Regular <EuroSerReg -zpeuri EuroSerif-Italic <EuroSerIta -zpeub EuroSerif-Bold <EuroSerBol -zpeubi EuroSerif-BoldItalic <EuroSerBolIta -zpeurs EuroSans-Regular <EuroSanReg -zpeuris EuroSans-Italic <EuroSanIta -zpeubs EuroSans-Bold <EuroSanBol -zpeubis EuroSans-BoldItalic <EuroSanBolIta -zpeurt EuroMono-Regular <EuroMonReg -zpeurit EuroMono-Italic <EuroMonIta -zpeubt EuroMono-Bold <EuroMonBol -zpeubit EuroMono-BoldItalic <EuroMonBolIta - - -OzTeX config file entries - -zpeur EuroSerif-Regular "Euro Serif" nil -zpeuri EuroSerif-Italic "Euro Serif" nil i -zpeub EuroSerif-Bold "Euro Serif" nil b -zpeubi EuroSerif-BoldItalic "Euro Serif" nil bi -zpeurs EuroSans-Regular "Euro Sans" nil -zpeuris EuroSans-Italic "Euro Sans" nil i -zpeubs EuroSans-Bold "Euro Sans" nil b -zpeubis EuroSans-BoldItalic "Euro Sans" nil bi -zpeurt EuroMono-Regular "Euro Monospace" nil -zpeurit EuroMono-Italic "Euro Monospace" nil i -zpeubt EuroMono-Bold "Euro Monospace" nil b -zpeubit EuroMono-BoldItalic "Euro Monospace" nil bi - - -DVI DRIVER CONFIGURATION LINES FOR MARVOSYM -=========================================== - -Here are some lines to configure dvips to use the Marvosym fount: - -Dvips psfonts.map entries for the original Marvosym fount: - -fmvr8x Martin_Vogels_Symbole <marvosym.pfb -fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <marvosym.pfb - - -Dvips psfonts.map entries for the Y&Y `ATM compatible' -re-worked Marvosym fount: - -fmvr8x Marvosym <marvosym.pfb -fmvri8x Marvosym " .167 SlantFont" <marvosym.pfb - - -I have assumed that all dvi drivers that can use PostScript Type 1 -founts can also produce fake italic founts by slanting an upright -version. Because of this, I have made no provision for dvi drivers -that can't do this. If you have a dvi driver that can't fake an -italic, please let me know and I'll modify the eurofont package to -take this into account, probably by adding another option and writing -a new fd file. - -Note for Macintosh users - -A Mac version of the Marvosym fount has been created in PostScript Type 1 -and TrueType versions. It uses the Y&Y names as above, and these lines are -be needed for dvips's psfonts.map file: - -fmvr8x Marvosym <Marvo -fmvri8x Marvosym " .167 SlantFont" <Marvo - -And these lines for OzTeX's default config file: - -fmvr8x Marvosym Marvosym nil -fmvri8x Marvosym Marvosym nil i - - -If a version of the original Marvosym fount is ever released for Macs, -these lines will be needed for dvips's psfonts.map file: - -fmvr8x Martin_Vogels_Symbole <MartiVogSym -fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <MartiVogSym - -And these lines for OzTeX's default config file: - -fmvr8x MartiVogSym "Martin Vogels Symbole" nil -fmvri8x MartiVogSym "Martin Vogels Symbole" nil i diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurofont.dtx b/Master/texmf-dist/doc/fonts/eurofont/eurofont.dtx deleted file mode 100644 index 57800578f5f..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/eurofont.dtx +++ /dev/null @@ -1,4148 +0,0 @@ -%%\iffalse -%% File eurofont.sty -%% copyright Rowland McDonnell 1998 -%% email rebecca@astrid.u-net.com -%%\This file is part of the eurofont distribution. You can distribute it -%% freely provided that you include the rest of the eurofont distribution -%% with this file and make no more than a nominal charge to cover the -%% costs of distributing it. -%% -%% If you would like to change the contents of this file, please make a -%% copy of it under a different name and change that instead. Keep my -%% copyright notice attached, but make it clear that the new file is your -%% responsibility so you get the credit for the improvements and I don't -%% get blamed for the bugs. -% -% Remove \OnlyDescription to get the code typeset. -% -% Note to me: comment out \OnlyDescription to get the checksum right, -% and then uncomment it. Maybe. -% -%\fi -%\iffalse -%<*driver> -\documentclass[a4paper,10pt]{ltxdoc} -\usepackage{tabularx,varioref,xspace} -\usepackage[OT1]{fontenc} -% \OnlyDescription -\begin{document} - \DocInput{eurofont.dtx} -\end{document} -%</driver> -%\fi -%\iffalse -%<*package> -%\fi -%% \CheckSum{1267} -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -% -% \author{Rowland McDonnell\\ \texttt{rebecca@astrid.u-net.com}} -% \title{The \packname{eurofont} package v1.1.3} -% \date{30th January 1999} -% -% \newcommand*{\packname}[1]{{\sffamily #1}} -% \newcommand*{\classname}[1]{{\ttfamily #1}} -% \newcommand*{\optname}[1]{{\ttfamily #1}} -% \newcommand*{\lfntname}[1]{{\ttfamily #1}} -% \newcommand*{\filename}[1]{{\ttfamily #1}} -% \DeclareRobustCommand*{\filename}[1]{{\ttfamily#1}} -% \newcommand*{\OzTeX}{O\kern-.03em z\kern-.15em\TeX} -% \newcommand{\PS}{PostScript\xspace} -% \newcommand{\dvidriver}{dvi driver\xspace} -% \newcommand{\Dvidriver}{Dvi driver\xspace} -% -%\makeatletter -%\iffalse -% The instances of ^^A are `real' comment characters to suppress the -% end-of-line space in the middle of the command definitions. -%\fi -% -%\newcommand{\ttlb}{{\ttfamily\def\@tempcmda{OT1}^^A -%\ifx\f@encoding\@tempcmda\char"7B\else\{\fi}} -% -%\newcommand{\ttrb}{{\ttfamily\def\@tempcmda{OT1}^^A -%\ifx\f@encoding\@tempcmda\char"7D\else\}\fi}} -% -%\newcommand{\ttbs}{{\ttfamily\def\@tempcmda{OT1}^^A -%\ifx\f@encoding\@tempcmda\char`\\\else\textbackslash\fi}} -% -%\newcommand*{\comname}[2][VF500F2E]{{\ttfamily\ttbs #2^^A -%\def\@tempcmda{VF500F2E}\def\@tempcmdb{#1}^^A -%\ifx\@tempcmda\@tempcmdb\else\comarg{#1}\fi}} -% -%\newcommand*{\comarg}[1]{{\ttfamily\ttlb$\langle$^^A -%{\rmfamily\itshape#1}\/$\rangle$\ttrb}} -% -%\newcommand*{\comoptarg}[1]{{\ttfamily[$\langle$^^A -%{\rmfamily\itshape#1}\/$\rangle$]}} -% -%\makeatother -% -% \maketitle -% -% \tableofcontents -% -% \section{Introduction} -% -% The \packname{eurofont} package was written to do two complementary -% jobs: firstly, to automate the process of using a euro symbol from any -% source in any fount\footnote{I am one of the last people in the world -% to use this spelling of the word to refer to `a set of type in one -% size and style'.}; secondly, to generate a `faked' euro symbol from a C -% with two lines across it, which can be used automatically when no -% suitable real euro symbol exists. -% -% Despite the name, the \packname{eurofont} package does not itself -% have a fount containing euro symbols: it's meant to help you use -% founts with euro symbols. -% -% The \packname{eurofont} package defines two commands meant to be used -% in documents: the \comname{euro} command which prints a euro symbol, -% and the \comname[amount]{euros} command which prints a euro symbol -% next to its argument -- normally a number -- with a small space in -% between the two. The particular euro symbol printed depends on the way -% \packname{eurofont} has been set up: the decision made is based on the -% fount in use at the time you use the command. The \comname{euros} -% command uses the \comname{euro} command to print the euro symbol, so -% these commands print the same symbol under the same circumstances. -% -% There are several ways of controlling which particular euro symbol you -% get with any given fount; the idea is that -- with a bit of luck -- -% most users won't need to do anything more complicated than passing -% options to \packname{eurofont} and making minor changes to the -% configuration file, \filename{eurofont.cfg}. -% -% Note for \OzTeX\ users (and perhaps others): throughout this document, -% I refer to the standard set of \PS Type 1 founts (Times, Helvetica, -% Courier, etc). If, like me, you use TrueType versions of Times, -% Palatino, etc., instead of \PS Type 1 versions, the difference doesn't -% matter. -% -% This is the second public release of the \packname{eurofont} package; -% as I had expected, at least one bug did escape my notice in the first -% release (it was a problem with the advice given on configuring dvips). -% I've fixed the problem reported, but there's probably a few more bugs -% lurking in the package; if you do spot any bugs, have any trouble with -% the documentation, you'd like to tell me how to configure the -% \dvidriver \emph{you} use (I'd love to hear from Amiga or Archimedes -% \TeX\ users in particular), or you'd just like to make a comment or -% suggestion about the \packname{eurofont} package, I'd appreciate an -% email at: |rebecca@astrid.u-net.com|. -% -% \subsection{What else do I need?} -% -% The only thing you must have to use the \packname{eurofont} package is -% a working \LaTeX2e\ installation. This package has only been tested -% with the June 1998 release of \LaTeX2e, but will probably work -% correctly with earlier versions. \packname{Eurofont} will not work -% with \LaTeX~2.09. -% -% The \packname{eurofont} package can be configured to produce useful -% euro symbols in the absence of any founts containing real euro -% symbols, but you will need to edit the configuration file if you want -% this; an introduction to configuring this package can be found in -% section~\vref{sec:config_intro}. -% -% In its default configuration, \packname{eurofont} expects to find -% Adobe's Eurofonts installed. If you want to avoid these, you can pass -% the \optname{marvosym} option to \packname{eurofont} and it'll expect -% the Marvosym fount instead. Adobe's Eurofonts have italic, bold, and -% bold italic variants which Marvosym lacks. -% -% Both Marvosym and the Eurofonts are \PS Type 1 founts: you can use -% them if you have a \PS printer, ATM (Adobe Type Manager), or a \PS -% emulator like Ghostscript. Section~\vref{sec:getPSfounts} has more on -% these founts and how to get them. -% -% The \packname{eurosym} and \packname{China2e} packages both have euro -% symbols in Metafont format which can be used by \packname{eurofont}. -% You'll get \packname{eurosym}'s euro symbol if you pass the -% \optname{eurosym} option to \packname{eurofont} -- this gives you -% \packname{eurosym}'s euro symbol instead of Adobe's Eurofonts or -% Marvosym's euro symbols, and also replaces the euro symbols you get -% with the Computer Modern founts. You will need to edit the -% configuration file if you want to use the euro symbol from the China2e -% fount. -% -% -% \subsection{How to install the package -- in brief} -% -% \begin{enumerate} -% \item Run \LaTeX\ on \filename{eurofont.ins}. -% \item Put \filename{eurofont.sty}, \filename{eurofont.cfg}, and all -% the files ending in \filename{.fd} into a directory on your -% tex-inputs search path. -% \item (optional) Get and install Adobe's Eurofonts, and/or the -% marvosym fount, and/or the \packname{China2e} package, and/or the EC -% founts (the T1 encoded re-working of the original Computer Modern -% founts), and/or the \packname{Eurosym} package. See -% section~\vref{sec:getfounts} for details. -% \item (optional) If you want to use Adobe's Eurofont's, put the -% \filename{zpeu...tfm} files into a directory on your tex-fonts search -% path, and the \filename{zpeu...vf} files into a directory on your vf -% (virtual founts) search path. -% \item (optional) If you intend to use the marvosym fount, put one -% of the two files \filename{fmvri8x.tfm} into a directory on your -% tex-fonts search path; put it with the file \filename{fmvr8x.tfm} that -% comes with the \packname{marvosym} distribution. -% \item (optional) Copy the appropriate lines from -% \filename{dvidrive.txt} to the appropriate file on your system to -% configure your \dvidriver to use marvosym and/or Adobe's Eurofonts. -% This procedure is also covered in section~\vref{sec:dvidriver_config}. -% \item (optional) Modify the file \filename{eurofont.cfg} as you like. -% \end{enumerate} -% -% \subsection{How to use the package -- a brief introduction} -% -% This is how to use \packname{eurofont} in your document: -%\begin{verbatim} -% \documentclass[a4paper]{article} -% \usepackage{eurofont} -% \begin{document} -% The euro symbol looks like this: \euro. A sum of money can -% be written like this: \euros{500}. -% \end{document} -%\end{verbatim} -% The \comname{euro} command prints the euro symbol; the \comname{euros} -% command is meant to be used to typeset a sum of money in euros: it -% prints the euro symbol to the left (by default) of its argument, with -% a small amount of space between the symbol and the text of the -% argument. If you give the \packname{eurofont} package the -% \optname{right} option, the euro symbol will be on the right. -% -% The \packname{eurofont} package's default setup assumes that you've -% got Adobe's Eurofonts installed. If you want use to euro symbols from -% the Marvosym fount instead, use the \optname{marvosym} option: -%\begin{verbatim} -% \usepackage[marvosym]{eurofont} -%\end{verbatim} -% -% The next question is: what do you get when you use the \comname{euro} -% or \comname{euros} command? The \packname{eurofont} package decides -% which euro symbol to use depending on the fount in use at the place -% where the \comname{euro} command is encountered. The way the package -% is set up initially, you get this: -% \begin{itemize} -% \item All bar one of the `standard' set of \PS founts get a -% euro symbol from one of Adobe's Eurofonts: Bookman, Times, Palatino, New -% Century Schoolbook, and Utopia use Euroserif; Avant Garde, Helvetica, -% Symbol, and Zapf Dingbats use Eurosans; and Courier uses Euromono. -% \item Zapf Chancery (the one exception) uses a euro symbol faked with -% medium rules. -% \item Each of the three Computer Modern text fount families (Computer -% Modern Roman, Computer Modern Sanserif, and Computer Modern -% Typewriter (\lfntname{cmr}, \lfntname{cmss}, and \lfntname{cmtt}) uses -% either the appropriate euro symbol from the matching `text companion' (TC) -% fount (if installed); or, if the TC founts appear to be missing, -% \packname{eurofont} will print a faked euro symbol instead. -% \item Everything else gets a euro symbol faked with medium weight -% rules. -% \end{itemize} -% The \optname{marvosym} option tells \packname{eurofont} to use the -% Marvosym fount's euro symbols in place of Adobe's Eurofonts. -% -% The faked euro symbols I refer to above are euro symbols produced by -% superimposing a pair of horizontal lines over a letter `C'. The -% result can be surprisingly tolerable in some cases. -% -% \subsubsection{Options} -% -% This is my best guess at the options most new users are likely to -% want to know about first, not a full list of all the options -- you -% can find that in section~\vref{sec:all_options}. -% \begin{description} -% \item[\optname{left}] This option makes the \comname{euros} command -% print the euro symbol to the left of its argument, which is normally a -% number; the \comname{euros} command is meant for typesetting sums of -% money. This is the default behaviour. -% -% \item[\optname{right}] This option makes the \comname{euros} command -% print the euro symbol to the right of its argument, which is normally -% a number; the \comname{euros} command is meant for typesetting sums of -% money. -% -% \item[\optname{marvosym}] This option tells \packname{eurofont} to use -% the Marvosym fount's euro symbols for the standard set of \PS -% Type 1 founts. The \packname{eurofont} package automatically fakes a -% bold version when needed, and you'll also get a decent faked -% italic/slanted version if your \dvidriver can slant a fount. -% -% \item[\optname{eurosym}] This option tells \packname{eurofont} to use -% the \packname{eurosym} package's euro symbol for the Computer Modern -% families and for the standard set of \PS Type 1 founts. If the -% \packname{eurosym} package isn't available, \packname{eurofont} -% complains and all euro symbols are created using the normal -% \packname{eurofont} code for printing faked euro symbols. -% \end{description} -% -% \subsection{Some founts with euro symbols}\label{sec:someeurofounts} -% -% It's a good idea to get some founts containing the euro symbol. -% Section~\vref{sec:getfounts} has more details of some freely available -% founts. In brief, the founts with euro symbols in that I know about are: -% \begin{center} -% \begin{tabularx}{\textwidth}{@{}ll>{\raggedright\arraybackslash}X@{}} -% \textbf{Fount} & \textbf{Format} & \textbf{Notes} \\[1ex] -% Adobe Eurofonts & PS Type 1 & Seriffed, sanserif, and -% monospaced all in upright, -% italic, bold, and bold italic\\ -% Marvosym & pfa and pfb only & Seriffed, sanserif, and monospaced -% in upright medium only\\[0.5ex] -% China2e & Metafont & A single beautiful upright euro -% symbol \\[0.5ex] -% Eurosym & Metafont & The official euro and an -% alternative approach to printing a -% faked euro\\[0.5ex] -% Text Companion & Metafont & Founts containing extra -% symbols that come with the T1 -% encoded version of the Computer -% Modern founts \\ -% \end{tabularx} -% \end{center} -% If you know of other founts containing euro symbols that are used -% with \LaTeX\, do please let me know and I'll add them to this list. -% -% The \packname{china2e} and \packname{marvosym} packages come with -% founts in one shape and weight only: medium upright. Despite this, the -% \packname{eurofont} package will print what looks like a bold euro symbol -% from either fount, and can (with a bit of help from your \dvidriver) -% also manage italic and bold italic euro symbols from \packname{marvosym}. -% -% The way it works is this: \packname{eurofont} comes with two -% \filename{tfm} files -- both called \filename{fmvri8x.tfm} -- for a -% slanted version of the Marvosym fount\footnote{Use the \filename{tfm} -% file from the \filename{original} directory if you're using the -% original version of Marvosym (the \filename{pfa} or \filename{pfb} -% files from CTAN or the TrueType version from Martin Vogel's Web site); -% and use the \filename{tfm} file from the \filename{yandy} folder if -% you're using the Y\&Y version of Marvosym -- either downloaded from -% the Y\&Y Web site, or the Macintosh version from CTAN.}. This fount -% doesn't really exist, but some \dvidriver{}s can create a slanted -% fount from an upright one by leaning it to one side. -% -% Assuming your \dvidriver can create a slanted fount (dvips can -- see -% section~\ref{sec:dvidriver_config:mvs} for more details), this extra -% \filename{tfm} file means you can use the Marvosym fount's euro -% symbols with slanted or italic founts: the results you get with this -% should be good enough for all practical purposes. \packname{Eurofont} -% also has two commands to print a `poor man's bold' version of a euro -% symbol; one of these is used automatically to print bold versions of -% the Marvosym or China2e euro symbols, which are missing bold variants. -% These poor man's bold commands print six copies of the requested -% symbol, each offset from the others by a very small amount in a -% hexagonal arrangement. There's a bit more detail in -% section~\vref{sec:howitworks:EFpmb}. -% -% If you want to use the euro symbol from China2e, you could do worse -% than to read section~\vref{sec:config_intro}. -% -% \subsection{How to change what you get -- a brief -% intro}\label{sec:config_intro} -% -% The \packname{eurofont} package comes with a configuration file called -% \filename{eurofont.cfg}. The idea is that you can change this file as -% much as you like to meet your preferences. -% -% But before diving in and changing anything, there are several options -% that can change what the package does. There's a brief description of -% some of them in section~\vref{sec:someeurofounts}, and -% section~\vref{sec:all_options} tells all. -% -% The basic idea behind \packname{eurofont}'s \comname{euro} command is -% this: there are several lists which have their contents defined in the -% file \filename{eurofont.cfg}. When you use the \comname{euro} or -% \comname{euros} command, the current fount family is checked against -% each list in turn. If the fount family matches an entry in a list, -% then the command corresponding to that list is executed. This command -% prints a particular euro symbol. The first match you get decides which -% euro symbol you get: you can't get two euro symbols if one fount -% family is listed in, say, the \comname{chinaelist} and the -% \comname{seriflist} -% -% So, for example, the fount family \lfntname{ptm} (Adobe Times) is -% listed in \comname{seriflist}. If you use the \comname{euro} command -% in the middle of some text typeset in Times, the command -% \comname{makeserifeuro} is executed, and you get a euro symbol from -% Adobe's Euroserif fount (by default, that is; if you've used the -% \optname{marvosym} option, you'll get Marvosym's seriffed euro -% symbol). I'll explain how to find out the internal fount family name -% of each fount in a bit. -% -% The configuration file (\filename{eurofont.cfg}) contains this by -% default: -%\begin{verbatim} -%% -%% List contents Corresponding command -%% -% \EFaddtolist{\userlist}{}% \makeusereuro -% \EFaddtolist{\texteurolist}{}% \maketexteuro -% \EFaddtolist{\chinaelist}{}% \makechinaeeuro -% \EFaddtolist{\cmlist}{cmr,cmss,cmtt}% \makecmeuro -% \EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro -% \EFaddtolist{\sanslist}{pag,phv,psy,pzd}% \makesanseuro -% \EFaddtolist{\monolist}{pcr}% \makemonoeuro -% \EFaddtolist{\fakemediumlist}{pzc}% \makefakemediumeuro -% \EFaddtolist{\fakelightlist}{}% \makefakelighteuro -% \EFaddtolist{\fakeheavylist}{}% \makefakeheavyeuro -%\end{verbatim} -% The lists are created at the start of the \packname{eurofont} -% package with nothing in them: the code above tells you -% the full story about what's in each list. You can use the -% \comname{EFaddtolist} command anywhere after the \packname{eurofont} -% package has been loaded; you can use it in individual document -% preambles if you like, as well as in \filename{eurofont.cfg}. -% -% Each fount in \LaTeX\ belongs to a fount family. For example, Bookman -% Roman, Bookman Italic, Bookman Bold, and Bookman Bold Italic are all -% different founts, but they belong to the Bookman family. This family -% has an internal \LaTeX\ name: \lfntname{pbk}. One way of discovering -% the name of a fount family is to use \packname{eurofont}'s -% \comname{showfontfamily} command in your document: it displays the -% internal name of the current fount family on the screen and in the log -% file. -% -% Before going any further, remember this: each list is a list of fount -% family names. If you're using a fount family that's in a particular -% list, you get the euro symbol generated by the command corresponding -% to that list. Section~\vref{sec:fountfamilies} has more notes on -% \LaTeX\ fount families. -% -% If, for example, you don't like the euro symbol that you get with -% Computer Modern Roman, and you'd rather have the euro symbol from -% China2e with Computer Modern Roman, you can do this by changing two lines. -% Where the configuration file says this: -%\begin{verbatim} -% \EFaddtolist{\chinaelist}{} -% \EFaddtolist{\cmlist}{cmr,cmss,cmtt} -%\end{verbatim} -% you should change it to this: -%\begin{verbatim} -% \EFaddtolist{\chinaelist}{cmr} -% \EFaddtolist{\cmrlist}{cmss,cmtt} -%\end{verbatim} -% -% You might have a new \PS fount that you'd like to use Adobe's -% Euroserif euro symbol with. If that fount is, say, Monotype Joanna -% (fount family name \lfntname{mjo}), you can do this by adding -% \lfntname{mjo} to the \comname{seriflist}: -%\begin{verbatim} -% \EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put,mjo} -%\end{verbatim} -% -% Or you might be using (say) Bitstream Bernhard Modern (family name -% \lfntname{bb7}) which you might think doesn't go well with any of the -% real euro symbols on offer. You might prefer a euro symbol faked with -% light rules in this case. You can get this by saying: -%\begin{verbatim} -% \EFaddtolist{\fakelightlist}{bb7} -%\end{verbatim} -% -% Then again, you might have a fount that has a real euro symbol in it: -% call it Adobe Xyzzy (\lfntname{pxy}) for the sake of argument. If this -% fount has been set up properly for use with \LaTeX, the euro symbol -% will be available using the \comname{texteuro} command. Rather than -% having to use a different command to select the euro symbol if you're -% using this fount family, you can say: -%\begin{verbatim} -% \EFaddtolist{\texteurolist}{pxy} -%\end{verbatim} -% -% There are mechanisms that allow you to bypass the standard behaviours. -% You can, for example, use \comname{newcommand} in the configuration -% file to define any of the \comname{make...euro} commands to anything -% you like. You could, for example, say: -%\begin{verbatim} -% \newcommand{\makesanseuro} -% {{\fontfamily{phv}\selectfont\makefakeeuro}} -%\end{verbatim} -% and all fount families in the \comname{sanseurolist} would have a euro -% symbol faked from a C in Helvetica with two rules drawn across it. -% -% Alternatively, you could put a fount in \comname{usereurolist}, and -% you'd get a euro symbol generated by the \comname{makeusereuro} -% command. This is meant to be defined by you: by default, it prints a -% euro symbol faked with medium weight rules and displays on the screen a -% message explaining that you should have defined the -% \comname{makeusereuro} command to do what you want it to do. For -% example, the following lines in the configuration file: -%\begin{verbatim} -% \newcommand{\makeusereuro} -% {EUR} -%\end{verbatim} -% will give you `EUR' -- the standard international currency -% abbreviation for the euro currency unit -- for the euro symbol in all -% fount families listed in the \comname{usereurolist}. -% -% \comname{usereurolist} is the first list looked at: if a fount -% family is listed in the \comname{usereurolist} as well as another -% list, what you get is the euro symbol produced by -% \comname{makeusereuro}. -% -% Immediately after \comname{usereurolist} is examined, the -% \comname{euro} command looks to see if a command of the form -% \comname{<fam>euro} exists (where |<fam>| is the name of the -% current fount family). If it does, this command is executed and the -% \comname{euro} command finishes. For example, assume you've designed a -% euro symbol to match URW's Arnold Boecklin fount (family name -% \lfntname{uab}). Let's say you've written a command -% \comname{arnoldboecklineuro} to print this symbol. You could say this: -%\begin{verbatim} -% \newcommand{\uabeuro}{\arnoldboecklineuro} -%\end{verbatim} -% and the \comname{euro} command would print your new euro symbol -% whenever you were using Arnold Boecklin. -% -% \subsection{About this package and document} -% -% The original aim of the \packname{eurofont} package was to provide a -% trivial interface to allow one to use the euro symbols from Adobe's -% Eurofonts with any fount. The package has grown a bit since the -% original idea, which might explain a few things. While their -% contributions to the final code might look small, this package -% couldn't have been started (let alone finished) without the help of -% Donald Arseneau and Stefan Ulrich (in alphabetical order, in case -% you're wondering). They provided the list handling code which is at -% the heart of the package. -% -% The biggest problem I had with this package was documenting it. I've -% no idea whether or not the documentation has `hit the right note' -- -% if you've any comments at all to make about the documentation (or the -% package for that matter), do please email me and let me know what you -% think. Comments, suggestions, and bug reports are all very much -% welcome. To say that writing the documentation was a headache is -% putting it mildly. If you read the documentation from start to -% finish, you'll notice that there's a certain amount of repetition. -% This is deliberate, and is meant to make it easier to use the -% documentation. -% -% One problem that this package will face is that more and more founts -% containing euro symbols will appear as time goes on. With a bit of -% luck, it's flexible enough for you to be able to configure it to deal -% with these new founts. If not, or if you've had a thought about what -% might be done with one or more of these new founts, do please let me -% know by email -- if it's practical, it would be nice to modify this -% package to make it more useful. -% -% \section{Installing the \packname{eurofont} package} -% \label{sec:installation} -% -% The \packname{eurofont} package proper comes in two files: -% \filename{eurofont.dtx} and \filename{eurofont.ins}. Running -% \LaTeX\ on \filename{eurofont.dtx} produces this document, so I'll -% assume you've done that. Running \LaTeX\ on \filename{eurofont.ins} -% generates: -% \begin{center} -% \begin{tabularx}{\textwidth}{@{}l>{\raggedright\arraybackslash}X@{}} -% \filename{dvidrive.txt}& Information on configuring \dvidriver{}s to -% use Adobe's Eurofonts and the Marvosym fount. \\ -% \filename{eurofont.cfg}& The configuration file: edit this file to change -% \packname{eurofont}'s behaviour. \\ -% \filename{eurofont.sty}& The package file proper. \\ -% \filename{uzmvs.fd} & \LaTeX\ code for selecting the Marvosym fount. \\ -% \filename{uzpeur.fd} & \LaTeX\ code for selecting Adobe's Euroserif fount.\\ -% \filename{uzpeuss.fd} & \LaTeX\ code for selecting Adobe's Eurosans fount.\\ -% \filename{uzpeutt.fd} & \LaTeX\ code for selecting Adobe's Euromono fount.\\ -% \end{tabularx} -% \end{center} -% \filename{eurofont.cfg} and \filename{eurofont.sty} should be put in -% a directory on your tex-inputs search path: they're both essential. -% If you're using either Adobe's Eurofonts or the Marvosym fount, read -% \filename{dvidrive.txt}. Once you've used it, you can discard it. -% -% The \filename{fd} files are only needed if you're using the founts in -% question. What they're for is this: \TeX\ can only typeset text in a -% particular fount if it has a \filename{tfm} file corresponding to that -% fount to look at. \LaTeX\ \filename{fd} files contain code to select a -% \filename{tfm} file when you ask for a particular fount using \LaTeX\ -% commands. For example, you might ask for `U encoded Adobe Euroserif in -% bold italic'. \LaTeX\ would then look at the file -% \filename{uzpeur.fd}, and discover that this request corresponded to -% \filename{zpeubi.tfm}. -% -% If you intend to use the Marvosym fount, put the file -% \filename{uzmvs.fd} into a directory on your tex-inputs search path. -% This file is named so that it won't clash with the original Marvosym -% fount definitions: you don't have to worry about the -% \packname{marvosym} package getting confused because the -% \packname{eurofont} package uses the \packname{marvosym} fount -% differently. -% -% If you intend to use Adobe's Eurofonts, put the three -% \filename{uzpeu...fd} files into a directory on your tex-inputs search -% path. If you already have files with these names from a different -% source, I suggest that you replace the older files with the -% \filename{fd} files that come with \packname{eurofont}. If this causes -% any problems, please let me know by emailing -% \texttt{rebecca@astrid.u-net.com}. -% -% \subsection{Using Marvosym and Adobe's Eurofonts} -% -% How to get these founts is covered in section~\vref{sec:getfounts}. To -% use them with the \packname{eurofont} package, you need to install the -% appropriate \filename{fd} files and configure your \dvidriver, as -% explained above. Assuming you have installed the actual fount files on -% your computer, you then need \filename{tfm} files for these founts: -% these are the files that tells \TeX\ exactly what size each letter is, -% and allows it to produce output with a given fount. -% -% The \packname{eurofont} package comes with suitable \filename{tfm} -% files for Adobe's Eurofonts, and two extra \filename{tfm} files for -% the Marvosym fount. Which of these two \filename{tfm} files you should -% use depends on which version of the Marvosym fount you have. -% -% \subsubsection{Using Adobe's Eurofonts} -% -% If you intend to use Adobe's Eurofonts, you should put all 12 files in -% the \filename{adobeuro/tfmfiles/} directory into a tex-fonts -% directory. These files should exist happily alongside any other -% \filename{tfm} files generated for Adobe's Eurofonts: being generated -% by \packname{afm2tfm}, they should be identical to any others you -% might have. I suggest that you remove any other \filename{tfm} files -% you might have for these founts unless you know that you need to keep -% them installed. If this advice causes you any problems, please email -% me and let me know. -% -% \subsubsection{Using the Marvosym fount} -% -% The Marvosym fount comes with a \filename{tfm} file of its own, and -% the \packname{eurofont} package includes two extra \filename{tfm} -% files: you should use one of these to allow you access to a faked -% italic/slanted version of Marvosym, assuming that your \dvidriver can -% produce a faked italic by slanting an upright fount. Both dvips and -% \OzTeX\ can do this. -% -% If you are using a version of the original Marvosym fount (the -% original \filename{pfa} or \filename{pfb} files from CTAN, or the -% Truetype version from Martin Vogel's Web site), then you should take -% the file \filename{fmvri8x.tfm} from the directory -% \filename{marvosym/tfmfiles/original}, and put it in the same -% tex-fonts directory as the file \filename{fmvr8x.tfm} which came with -% the \packname{marvosym} package. -% -% If you are using one of the ATM-compatible versions of the Marvosym -% fount from Y\&Y (either from Y\&Y's Web site or any of the Mac -% versions from CTAN), things are slightly more complicated. In this -% case, you might be using the Y\&Y supplied \filename{tfm} file -% \filename{marvosym.tfm} to use this fount. If so, leave -% \filename{marvosym.tfm} alone: take the files \filename{fmvr8x.tfm} -% and \filename{fmvri8x.tfm} from the directory -% \filename{marvosym/tfmfiles/yandy}, and put them in the tex-fonts -% directory which contains \filename{marvosym.tfm}. If you have changed -% the name of the Y\&Y supplied \filename{tfm} file to -% \filename{fmvr8x.tfm}, just add \filename{fmvri8x.tfm}. -% -% Note that you should not use the file \filename{fmvr8x.tfm} supplied -% for the original Marvosym fount with any of the Y\&Y versions of -% Marvosym, or vice versa: the founts are very, very similar, but differ -% in tiny details which affect the metrics file very slightly. You -% should therefore use the \filename{tfm} file supplied with the -% particular fount you're using. If you're not sure of the source of the -% Marvosym \filename{tfm} file already installed on your computer, you -% might prefer to replace it with the appropriate version of -% \filename{fmvr8x.tfm} supplied with the \packname{eurofont} package. -% -% The original \PS version of the Marvosym fount has the \PS name -% \texttt{Martin\_Vogels\_Symbole}, while the Y\&Y re-worked version has -% the \PS name \texttt{Marvosym}; this leads to different \dvidriver -% configuration file entries which should help you avoid any confusion -% over which version you've got. -% -% \section{All the options}\label{sec:all_options} -% -% Here are all of \packname{eurofont}'s options, presented in no -% particular order. -% \begin{description} -% \item[\optname{left}] This option makes the \comname{euros} command -% print the euro symbol to the left of its argument. When you use this -% option, it's also passed to the \packname{eurosym} package, so that -% \packname{eurosym}'s \comname{EUR} command will also print the euro -% symbol to the left of its argument. This is the default behaviour. -% -% \item[\optname{right}] This option makes the \comname{euros} command -% print the euro symbol to the right of its argument. When you use this -% option, it's also passed to the \packname{eurosym} package, so that -% \packname{eurosym}'s \comname{EUR} command will also print the euro -% symbol to the right of its argument. -% -% \item[\optname{marvosym}] This option tells \packname{eurofont} to use -% the Marvosym fount's euro symbols for the standard set of \PS -% Type 1 founts. The \packname{eurofont} package automatically fakes a -% bold version when needed, and you'll also get a decent faked -% italic/slanted version if your \dvidriver can slant a fount. This -% option counteracts the \optname{adobeeurofonts} option, and can be -% over-ridden by the \optname{eurosym} option. -% -% \item[\optname{adobeeurofonts}] This option tells \packname{eurofont} -% to use Adobe's Eurofonts to supply the euro symbols for the standard -% set of \PS Type 1 founts; this setting is used by default. This -% option counteracts the \optname{marvosym} option, and can be -% over-ridden by the \optname{eurosym} option. -% -% \item[\optname{eurosym}] This option tells \packname{eurofont} to use -% the \packname{eurosym} package's euro symbol for the Computer Modern -% families, and the standard set of \PS Type 1 founts. If the -% \packname{eurosym} package isn't available, \packname{eurofont} -% complains and all euro symbols are created using the normal -% \packname{eurofont} code for printing faked euro symbols. -% -% \item[\optname{noeurosym}] This option counteracts the -% \optname{eurosym} option; if (for example) you have a configuration -% file that says \comname{ExecuteOptions\ttlb eurosym\ttrb}, you can tell -% \packname{eurofont} \emph{not} to use \packname{eurosym}'s euro -% symbols, and use the normal founts -- typically Adobe's Eurofonts and -% the Text Companion founts. This is the default behaviour. -% \end{description} -% -% These next four options only affect what you get when you've given the -% \packname{eurofont} package the \optname{eurosym} option. See the -% \packname{eurosym} package's documentation for more details. -% \begin{description} -% \item[\optname{official}]This option is passed to the -% \packname{eurosym} package, and tells it to give you the official euro -% symbol. -% -% \item[\optname{gen}]This option is passed to the \packname{eurosym} -% package, and tells it to give you a faked euro symbol. -% -% \item[\optname{gennarrow}] This option is passed to the -% \packname{eurosym} package, and tells it to give you a faked euro -% symbol with narrow cross-strokes. -% -% \item[\optname{genwide}]This option is passed to the -% \packname{eurosym} package, and tells it to give you a faked euro -% symbol with wide cross-strokes. -% \end{description} -% -% The following three options affect how \packname{eurofont} produces -% faked euro symbols. -% \begin{description} -% \item[\optname{noslantfakeeuro}] \packname{Eurofont}'s faked euro -% symbols are produced with two rules of the same length. -% -% \item[\optname{normalslantfakeeuro}] \packname{Eurofont}'s faked euro -% symbols are produced with two rules of slightly different length: the -% lower rule is the shorter of the two. This is the default -% behaviour; it approximates the difference in length of the two rules -% in the official euro symbol. -% -% \item[\optname{bigslantfakeeuro}] \packname{Eurofont}'s faked euro -% symbols are produced with two rules of greatly different length: the -% lower rule is by far the shorter of the two. This was inspired by -% the China2e fount's euro symbol. -% \end{description} -% -% And finally, some options which don't seem to belong with anything -% else. -% \begin{description} -% \item[\optname{notextcomp}] This option tells the \packname{eurofont} -% package not to load the \packname{textcomp} package; it counteracts -% the \optname{textcomp} option. You might want to use this option if -% you find that some characters or accents are unexpectedly wrong when -% using the \packname{eurofont} package -- this sort of thing can be -% caused by loading the \packname{textcomp} package. See also the -% \optname{fixtieaccent} option. -% -% \item[\optname{textcomp}] This option tells the \packname{eurofont} -% package to load the \packname{textcomp} package (part of the standard -% \LaTeX\ distribution) if it is available. This package defines the -% \comname{texteuro} command (amongst other things). Trying to load -% \packname{textcomp} is the default behaviour. One possibly unwanted -% effect of loading \packname{textcomp} is that tie accents are -% typically messed up if you're using \PS Type 1 founts; the -% \optname{fixtieaccent} option can help out with this. -% -% \item[\optname{fixtieaccent}] This option counteracts the -% \optname{nofixtieaccent} option: it makes \packname{eurofont} define -% the tie accent to work the way it does as standard when the -% \packname{textcomp} package hasn't been loaded. If you find tie -% accents no longer work when using \packname{eurofont}, you can use -% either this option or the \optname{notextcomp} option to fix things. -% -% \item[\optname{nofixtieaccent}] This option counteracts the -% \optname{fixtieaccent} option: it stops \packname{eurofont} defining -% the tie accent to work the way it does as standard when the -% \packname{textcomp} package hasn't been loaded. This is the default -% behaviour. -% -% \item[\optname{debugreport}] This option tells the -% \packname{eurofont} package to print all sorts of debugging -% information out when you use its commands. I added this option for my -% own benefit, but you might find it useful if you're configuring -% \packname{eurofont} in strange fashions and not getting what you want. -% -% \item[\optname{nodebugreport}]This option tells the -% \packname{eurofont} package not to print out any debugging -% information. This is the default behaviour. -% \end{description} -% -% For those who might be interested: the following lines are executed -% just before loading the configuration file: -%{\small -%\begin{verbatim} -% \ExecuteOptions{adobeeurofonts}% Use Adobe's Eurofonts -% \ExecuteOptions{noeurosym}% Don't use eurosym -% \ExecuteOptions{left}% Euro symbol on left -% \ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant -% \ExecuteOptions{nodebugreport}% No debugging reports -% \ExecuteOptions{textcomp}% Load the textcomp package -% \ExecuteOptions{nofixtieaccent}% Don't modify tie accents -%\end{verbatim} -%} -% You can therefore over-ride any of these defaults by placing a -% subsequent \comname{ExecuteOptions} statement in the configuration -% file. For example, to make the \comname{euros} command place the -% euro symbol on the right of the sum by default, add: -%\begin{verbatim} -% \ExecuteOptions{right} -%\end{verbatim} -% to the configuration file, \filename{eurofont.cfg}. -% -% \section{Configuring the \packname{eurofont} package}\label{sec:config} -% -% There are three main mechanisms for changing the behaviour of -% \packname{eurofont}'s \comname{euro} command: passing an option to -% the \packname{eurofont} package, adding a fount family name to one -% of \packname{eurofont}'s lists, and re-defining the \comname{make...} -% commands used by the \comname{euro} command to print euro symbols. -% Options have been covered in section~\vref{sec:all_options}; the -% other two are covered here. -% -% The \packname{eurofont} package comes with a configuration file -- -% \filename{eurofont.cfg} -- that's meant to be changed to match your -% preferences. If you want to add a fount family to a list, or re-define -% some commands, you can make the changes in the configuration file. You -% can also put code to do these jobs in a document file if you like. -% Please don't change \filename{eurofont.sty} itself, unless you change -% its name to something else. -% -% The way the \comname{euro} command works is this: when you use the -% \comname{euro} command, it compares the current fount family name with -% the contents of a series of lists. If the current fount family name is -% in a given list, the command corresponding to that list is executed. -% This prints a particular euro symbol, and the \comname{euro} command -% finishes. If you don't know what a fount family name is in \LaTeX, -% have a look at section~\vref{sec:fountfamilies}. -% -% The lists are created at the start of the \packname{eurofont} package, -% and have fount family names entered into them by the -% \comname{EFaddtolist} command. There's more than just the lists I've -% mentioned in section~\ref{sec:config_intro}, though. The configuration -% file contains the following lines by default: -%\begin{verbatim} -%% -%% List contents Corresponding command -%% -% \EFaddtolist{\userlist}{}% \makeusereuro -% \EFaddtolist{\texteurolist}{}% \maketexteuro -% \EFaddtolist{\chinaelist}{}% \makechinaeeuro -% \EFaddtolist{\cmlist}{cmr,cmss,cmtt}% \makecmeuro -% \EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro -% \EFaddtolist{\sanslist}{pag,phv,psy,pzd}% \makesanseuro -% \EFaddtolist{\monolist}{pcr}% \makemonoeuro -% \EFaddtolist{\fakemediumlist}{pzc}% \makefakemediumeuro -% \EFaddtolist{\fakelightlist}{}% \makefakelighteuro -% \EFaddtolist{\fakeheavylist}{}% \makefakeheavyeuro -% -% \EFaddtolist{\faketexteurolist}{} -% -%% Put all the standard LaTeX weights (and likely extras) -%% into one of the following lists: -% -% \EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx} -% \EFaddtolist{\EFmediumserieslist} -% {m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx} -% \EFaddtolist{\EFboldserieslist}{b,bx,bc} -% \EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx} -%\end{verbatim} -% The point of the configuration file is that you should change it any -% way you like. But what do all these lines mean? In brief, what goes on -% is this: when you use the \comname{euro} command (and remember that -% the \comname{euro} command is used by the \comname{euros} command so -% this discussion applies to both commands), the current \LaTeX\ fount -% family name is compared to the contents of each of the lists above, in -% the order given, with an extra test I'll mention in a bit. If, for -% example, you're using New Century Schoolbook (fount family name -% \lfntname{pnc}), what happens with the default settings is this: -% \begin{enumerate} -% \item \comname{userlist} is examined. It's empty, so no match is -% found, and the command continues. -% \item This is the extra test mentioned above: a test is made to see if -% the command \comname{pnceuro} exists (in general, the command -% \comname{<fam>euro} is looked for, where |<fam>| is the \LaTeX\ fount -% family name of the current fount). If this command exists, it's -% executed and the \comname{euro} command terminates. In this case, the -% command doesn't exist, so the command continues. -% \item \comname{texteurolist} is examined. It's empty, so the -% \comname{euro} command continues. -% \item \comname{chinaelist} is examined. It's empty, so the -% \comname{euro} command continues. -% \item \comname{cmlist} is examined. It's not empty: the current fount -% family is \lfntname{pnc}, but the list contains \lfntname{cmr}, -% \lfntname{cmss}, and \lfntname{cmtt}. No match is found, so the -% \comname{euro} command continues. -% \item \comname{seriflist} is examined. It's not empty: the current -% fount family is \lfntname{pnc}, and the list contains \lfntname{pbk}, -% \lfntname{pnc}, \lfntname{ppl}, \lfntname{ptm}, and \lfntname{put}. A -% match is found, so \comname{makeserifeuro} -- the command -% corresponding to this list -- is executed, which prints a euro symbol -% from one of Adobe's Euroserif founts, and the \comname{euro} command -% finishes. -% \end{enumerate} -% You might be wondering what the \comname{faketexteuro} list is for. If -% a fount family is listed in \comname{faketexteuro}, the -% \comname{maketexteuro} command will always execute the -% \comname{makefakeeuro} command to generate a faked euro symbol for -% that fount family. It prevents the \comname{euro} command from -% printing a euro symbol using the \comname{texteuro} command. I'm not -% sure that this is particularly useful, but it seemed like a good idea -% at the time. -% -% Another unanswered question is: what happens if the \comname{euro} -% command has made all its tests and not printed a euro symbol? In this -% case, the \comname{makedefaulteuro} command is executed. By default, -% this command executes the \comname{makefakeeuro} command which prints -% a euro symbol faked with medium weight rules. You can of course -% re-define the \comname{makedefaulteuro} and \comname{makefakeeuro} -% commands any way you like. -% -% The \comname{EF...serieslist} commands are used by the commands that -% print faked euro symbols; these commands are slightly more involved -% than you might think. I'll deal with this in detail in a bit. -% -% \subsection{The \comname{make...euro} commands}\label{sec:config-makeeuro} -% -% It might be that you want to do something that can't be done -% conveniently by just changing which fount families are listed in the -% lists above. If so, you'll probably find it most convenient to play -% around with the definitions of the various \comname{make...euro} -% commands; please do cut-and-paste the original definitions into the -% configuration file and modify them there if you think this will help. -% I used the \comname{providecommand} command to define all the -% \comname{make...euro} commands so that the definitions in -% \filename{eurofont.sty} won't have any effect if the commands have -% been defined earlier. There's more detail on what these commands do in -% section~\vref{sec:how_it_works} and in the commented source code. -% -% The \comname{euro} command works like this: the current fount family -% name is compared against the contents of a series of lists. If the -% current fount family is present in a particular list, the command -% corresponding to that list is executed. The first match ends the -% execution of the \comname{euro} command: you'll not get two euro -% symbols if the current fount family is in two lists. You can see what -% I mean in section~\vref{sec:how_euro_works}. -% -% One anomaly is the second test made in the \comname{euro} command, -% directly after looking in \comname{userlist}: this second test doesn't -% check for a match in a list, but instead checks for the existence of a -% command \comname{<fam>euro}, where |<fam>| is the current fount family -% name. If this command exists, it's executed and the \comname{euro} -% command ends. For example, if you define: -%\begin{verbatim} -% \newcommand{\pcreuro}{EUR} -%\end{verbatim} -% every time you use the \comname{euro} or \comname{euros} command while -% using Courier -- which has the fount family name \lfntname{pcr} -- -% you'll get `EUR' printed (the standard international abbreviation for -% the euro) rather than a euro symbol of any sort. -% -% This table is a partial summary of what goes on: -% \begin{center}\small -% \begin{tabularx}{\textwidth}{@{}ll>{\raggedright\arraybackslash}X@{}} -% \textbf{List name} & \textbf{Command executed} -% & \textbf{What you get by default} \\[1ex] -% \comname{userlist} & \comname{makeusereuro} -% & Fakes a euro and prints a warning. \\ -% & \comname{<fam>euro} -% & If it exists, \comname{<fam>euro} is -% executed. \\ -% \comname{texteurolist } & \comname{maketexteuro} -% & Prints a euro symbol from the current -% fount or a faked euro symbol. \\ -% \comname{chinaelist} & \comname{makechinaeeuro} -% & Prints the euro from the China2e fount. \\ -% \comname{cmlist} & \comname{makecmeuro} -% & Prints a euro symbol from the current -% fount or a faked euro symbol. \\ -% \comname{seriflist} & \comname{makeserifeuro} -% & Prints a euro from Adobe Euroserif. \\ -% \comname{sanslist} & \comname{makesanseuro} -% & Prints a euro from Adobe Eurosans. \\ -% \comname{monolist} & \comname{makemonoeuro} -% & Prints a euro from Adobe Euromono. \\ -% \comname{fakelightlist} & \comname{makefakelighteuro} -% & Fakes a euro with light weight rules. \\ -% \comname{fakemediumlist} & \comname{makefakemediumeuro} -% & Fakes a euro with medium weight rules. \\ -% \comname{fakeheavylist} & \comname{makefakeheavyeuro} -% & Fakes a euro with heavy weight rules. \\ -% \end{tabularx} -% \end{center} -% What happens when you use the \comname{euro} command is that each list -% is considered in turn, starting with the \comname{userlist}. If the -% fount family being used at that point in the document is in that list, -% a euro symbol is generated by the specified command and that's the end -% of the command. If the fount family being used isn't in the first -% list, the next list is looked at and so on. If this explanation is -% less than crystal clear, you might find it useful to read -% section~\vref{sec:how_euro_works}. -% -% If each list has been checked and the current fount family hasn't been -% found in any of them, the \comname{makedefaulteuro} command is -% executed. This produces a faked euro symbol: the \packname{eurofont} package -% has commands to make these by drawing two rules over a letter C; they -% can be surprisingly acceptable particularly if made with a sanserif -% fount. -% -% A brief description of what each of the \comname{make...euro} command -% does is: -% -% \begin{description} -% \item[\comname{makefakeeuro}] This command doesn't correspond to a -% list, but is used by the \comname{makedefaulteuro} command and other -% parts of the \packname{eurofont} package. What it does is this: it -% first checks to see if the command \comname{<fam>fakeeuro} exists, -% where |<fam>| is the current \LaTeX\ fount family name. If this -% command exists, it's executed; if not, the current fount family name -% is checked against (in this order) the \comname{fakelightlist}, -% \comname{fakemediumlist}, and \comname{fakeheavylist}. If there's a -% match, it executes \comname{makefakelighteuro}, -% \comname{makefakemediumeuro}, or \comname{makefakeheavyeuro} -% (depending on which list had the match). If it finds no match, it -% executes \comname{makefakemediumeuro}. -% -% The \comname{makefake...euro} commands produce euro symbols faked by -% placing a pair of rules over a letter `C'. -% -% For example, if you were using Zapf Chancery, which has an internal -% \LaTeX\ fount family name of \lfntname{pzc}, and -% \comname{makefakeeuro} were executed, the first test would be to see -% if \comname{pzcfakeeuro} existed. Since \packname{eurofont} does -% define this command, it exists, and is executed. -% -% \item[\comname{makeusereuro}] Meant to be defined by you; by default, -% this command generates an on-screen warning and executes the -% \comname{fakemediumrule\-euro} command which prints a euro symbol -% faked with medium rules. -% -% \item[\comname{maketexteuro}]\label{item:maketexteuro:config} -% This command executes the \comname{texteuro} command if these three -% conditions are met: the current \LaTeX\ fount family is not listed in -% the \comname{faketexteurolist}, the \comname{texteuro} command exists -% (it's defined by the \packname{textcomp} package which -% \packname{eurofont} tries to load by default), and the fount -% definition file |ts1<fam>.fd| exists (where |<fam>| is the current -% \LaTeX\ fount family name -- this \filename{fd} file will normally -% exist if the fount does have a euro symbol available). If these -% conditions are not met, it executes \comname{makefakeeuro} instead of -% \comname{texteuro}. -% -% The \comname{texteuro} command, defined by \packname{textcomp}, prints -% a euro symbol from the current fount, assuming everything's working -% right; the \comname{makefakeeuro} command prints a euro symbol faked -% by placing two rules over a letter `C'. -% -% \item[\comname{makechinaeeuro}] This command prints the euro symbol -% from the China2e fount. If the current fount series is listed as light -% or medium by being in either \comname{EFlightserieslist} or -% \comname{EFmediumserieslist} you'll get the straight China2e euro -% symbol; if the current fount series is listed as bold or ultra bold by -% being in either \comname{EFbold\-series\-list} or -% \comname{EFultraboldserieslist} you'll get a faked bold China2e euro -% symbol. If the current fount series isn't listed in any of these -% lists, you'll get a straight China2e euro symbol. -% -% The \comname{makechinaeeuro} command checks for the \packname{china2e} -% package: if it's missing, you'll get a warning message and a faked -% euro symbol. -% -% \item[\comname{makecmeuro}] This command normally has the same effect -% as \comname{maketexteuro}: it executes the \comname{texteuro} command -% if the three conditions are met (see above, in the -% \comname{maketexteuro} entry on -% page~\pageref{item:maketexteuro:config}); otherwise, it executes -% \comname{makefakeeuro} -- this command fakes a euro symbol from a C -% over-printed with two rules. This behaviour can be changed using an -% option: if you've passed the \packname{eurosym} option to -% \packname{eurofont}, the \comname{makecmeuro} command prints Eurosym's -% euro symbol instead. -% -% \item[\comname{makeserifeuro}] -% This command normally prints a euro symbol from one of Adobe's -% Euroserif founts (medium, italic, bold, or bold italic). If you've -% passed the \optname{marvosym} option to \packname{eurofont}, you'll -% get a seriffed euro symbol from the Marvosym fount instead. Since -% Marvosym doesn't have real bold euro symbols, you'll get a faked bold -% euro symbol if the current fount series is listed in -% \comname{EFboldserieslist} or \comname{EFultraboldserieslist} (as -% with the \comname{makechinaeeuro} command). -% -% If you've passed the \optname{eurosym} option to \packname{eurofont}, -% you'll get a euro symbol generated by \packname{eurosym}'s -% \comname{euro} command: this option over-rides both the -% \optname{marvosym} option and the default \optname{adobeeurofonts} -% option. -% -% The commands \comname{makeserifeuro}, \comname{makesanseuro}, and -% \comname{makemonoeuro} are very similar. -% -% \item[\comname{makesanseuro}] -% This command normally prints a euro symbol from one of Adobe's -% Eurosans founts (medium, italic, bold, or bold italic). If you've -% passed the \optname{marvosym} option to \packname{eurofont}, you'll -% get a sanserif euro symbol from the Marvosym fount instead. Since -% Marvosym doesn't have real bold euro symbols, you'll get a faked bold -% euro symbol if the current fount series is listed in -% \comname{EFboldserieslist} or \comname{EFultraboldserieslist} (as -% with the \comname{makechinaeeuro} command). -% -% If you've passed the \optname{eurosym} option to \packname{eurofont}, -% you'll get a euro symbol generated by \packname{eurosym}'s \comname{euro} -% command: this option over-rides both the \optname{marvosym} option and -% the default \optname{adobeeurofonts} option. -% -% The commands \comname{makeserifeuro}, \comname{makesanseuro}, and -% \comname{makemonoeuro} are very similar. -% -% \item[\comname{makemonoeuro}] -% This command normally prints a euro symbol from one of Adobe's -% Euromono founts (medium, italic, bold, or bold italic). If you've -% passed the \optname{marvosym} option to \packname{eurofont}, you'll -% get a monospaced euro symbol from the Marvosym fount instead. Since -% Marvosym doesn't have real bold euro symbols, you'll get a faked bold -% euro symbol if the current fount series is listed in -% \comname{EFboldserieslist} or \comname{EFultraboldserieslist} (as -% with the \comname{makechinaeeuro} command). -% -% If you've passed the \optname{eurosym} option to \packname{eurofont}, -% you'll get a euro symbol generated by \packname{eurosym}'s \comname{euro} -% command: this option over-rides both the \optname{marvosym} option and -% the default \optname{adobeeurofonts} option. -% -% The commands \comname{makeserifeuro}, \comname{makesanseuro}, and -% \comname{makemonoeuro} are very similar. -% -% \item[\comname{makefakelighteuro}] -% First checks to see if the command \comname{<fam>fakeeuro} exists -% (where |<fam>| is the name of the current fount family); if so, it -% executes \comname{<fam>fakeeuro} (as with \comname{makefakeeuro}). If -% not, it executes \comname{fakelighteuro} -- this gives you a euro -% symbol faked with light rules. -% -% The particular weight (or thickness) of these rules varies depending -% on which \comname{EF...serieslist} the current fount series is in: the -% rules are lightest if the current fount series is listed in -% \comname{EFlightserieslist}, progressively heavier if listed in -% \comname{EFmediumseries} and \comname{EFboldseries}, and heaviest if -% listed in \comname{EFultraboldseries}. If the current fount series -% isn't listed in any of these lists, you get the rules you'd get if the -% current series were listed in \comname{EFmediumseries}. -% -% This command is very similar to the commands -% \comname{makefakemediumeuro} and \comname{makefakeheavyeuro}. -% -% \item[\comname{makefakemediumeuro}] -% First checks to see if the command \comname{<fam>fakeeuro} exists -% (where |<fam>| is the name of the current fount family); if so, it -% executes \comname{<fam>fakeeuro} (as with \comname{makefakeeuro}). If -% not, it executes \comname{fakemediumeuro} -- this gives you a euro -% symbol faked with medium weight rules. -% -% The particular weight (or thickness) of these rules varies depending -% on which \comname{EF...serieslist} the current fount series is in: the -% rules are lightest if the current fount series is listed in -% \comname{EFlightserieslist}, progressively heavier if listed in -% \comname{EFmediumseries} and \comname{EFboldseries}, and heaviest if -% listed in \comname{EFultraboldseries}. If the current fount series -% isn't listed in any of these lists, you get the rules you'd get if the -% current series were listed in \comname{EFmediumseries}. -% -% This command is very similar to the commands -% \comname{makefakemediumeuro} and \comname{makefakeheavyeuro}. -% -% \item[\comname{makefakeheavyeuro}] -% First checks to see if the command \comname{<fam>fakeeuro} exists -% (where |<fam>| is the name of the current fount family); if so, it -% executes \comname{<fam>fakeeuro} (as with \comname{makefakeeuro}). If -% not, it executes \comname{fakeheavyeuro} -- this gives you a euro -% symbol faked with heavy rules. -% -% The particular weight (or thickness) of these rules varies depending -% on which \comname{EF...serieslist} the current fount series is in: the -% rules are lightest if the current fount series is listed in -% \comname{EFlightserieslist}, progressively heavier if listed in -% \comname{EFmediumseries} and \comname{EFboldseries}, and heaviest if -% listed in \comname{EFultraboldseries}. If the current fount series -% isn't listed in any of these lists, you get the rules you'd get if the -% current series were listed in \comname{EFmediumseries}. -% -% This command is very similar to the commands -% \comname{makefakemediumeuro} and \comname{makefakeheavyeuro}. -% -% \item[\comname{makedefaulteuro}] -% This command normally prints a faked euro symbol generated with the -% \comname{makefakeeuro} command. -% -% If you've passed the \optname{eurosym} option to \packname{eurofont}, -% the \comname{makedefaulteuro} command prints a euro symbol generated -% by \packname{eurosym}'s \comname{euro} command. Otherwise, the -% \comname{makedefaulteuro} command prints a faked euro symbol generated -% with the \comname{makefakeeuro} command. -% -% For the curious: \packname{eurofont} defines the \comname{ESeuro} -% command to be whatever \packname{eurosym} defined the \comname{euro} -% command to be. \packname{Eurofont} can then define the \comname{euro} -% command to be something else, but \packname{eurosym}'s \comname{euro} -% code is still accessible by using the \comname{ESeuro} command. -% -% \end{description} -% -% \section{Founts containing euro symbols}\label{sec:getfounts} -% -% This section was written in October 1998: I know that there are founts -% other than the ones I've noted below that contain euro symbols, but -% these are the only ones I know of that are convenient to use with -% \LaTeX. As far as I know, the founts currently included with `euro -% compatible' versions of MS-Windows and the MacOS have a euro symbol -% that is close to the official euro symbol. This doesn't match the -% fount it's included with in most cases. It seems to me that there is -% nothing to be gained by using these euro symbols with \LaTeX. I expect -% this situation will change in time, and matching euro symbols are -% designed for more founts. -% -% Aside from the Text Companion founts which accompany the EC founts -% (the relatively new T1 encoded versions of the standard Computer -% Modern founts used by \LaTeX -- I think they are included with all -% recent \LaTeX\ distributions), Metafont euro symbols are included in -% two other founts available from CTAN: China2e, which has a single very -% lovely euro symbol; and Eurosym, which has the official euro symbol. -% You can find out how to get all of these in -% section~\vref{sec:getMFfounts}. -% -% The euro symbols in the Text Companion founts were designed before -% the final official euro symbol was decided on, and might be considered -% a bit eccentric by some. -% -% I know of two sets of \PS Type 1 founts containing euro -% symbols: Adobe's Eurofonts, a set of 12 founts providing seriffed, -% sanserif, and monospaced euro symbols in medium upright, italic, bold, -% and bold italic version; and the Marvosym fount, which has three euro -% symbols, very similar to the medium upright seriffed, sanserif, and -% monospaced euro symbols from Adobe. -% -% Your \TeX\ system's documentation should tell you if you can use \PS -% Type 1 founts. Typically, you need either: a \PS printer or \PS -% interpreter on your computer such as Ghostscript; or Adobe Type -% Manager (ATM) installed on your computer and a \dvidriver (such as -% \OzTeX's) which can take advantage of this. -% -% \subsection{Getting Marvosym or Adobe's Eurofonts}\label{sec:getPSfounts} -% -% Adobe's Eurofonts are available (October 1998) in a Mac version -% from here: -%\begin{verbatim} -% ftp://ftp.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx -% ftp://ftp-pac.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx -%\end{verbatim} -% Textures users on Macs should also download these files from CTAN: -%\begin{verbatim} -% systems/mac/textures/contrib/IdealFonts/EuroDefs.sit.hqx -% systems/mac/textures/contrib/IdealFonts/README.IF -%\end{verbatim} -% You should still download Adobe's Eurofonts separately. -% -% Adobe's Eurofonts are available (October 1998) in a version suitable -% for MS-Windows PCs and Unix from here: -%\begin{verbatim} -% ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe -% ftp://ftp-pac.adobe.com/pub/adobe/type/win/all/eurofont.exe -%\end{verbatim} -% These files are self-extracting archives on MS-Windows computers which -% can be decompressed on Unix computers with the \verb|unzip| command. -% -% The Marvosym fount is available from CTAN in \filename{pfb} and -% \filename{pfa} versions, and I gather these versions won't work with -% ATM. There are also Mac versions based on the Y\&Y re-working of -% Marvosym mentioned below -- a Truetype version and a Mac PS Type 1 -% version that will work with ATM. -% -% The Marvosym fount and package are (October 1998) in this location at -% CTAN: -% site (October 1998): -%\begin{verbatim} -% /fonts/psfonts/marvosym/ -%\end{verbatim} -% -% A version which is apparently ATM compatible (implying the original -% version from CTAN isn't) is available from here: -%\begin{verbatim} -% http://www.YandY.com/download/marvosym.zip -%\end{verbatim} -% Note that the metrics for this version of Marvosym are slightly -% different to the original; to use this version of Marvosym with -% \packname{eurofont}, you should re-name the file -% \filename{marvosym.tfm} to \filename{fmvr8x.tfm} and put it on your -% tex-fonts path. -% -% Martin Vogel's Web page contains a TrueType version of Marvosym, in -% a format suitable for MS-Windows computers: -%\begin{verbatim} -% http://www.fh-bochum.de/fb1/vogel/marvosym.html -%\end{verbatim} -% -% \subsection{\Dvidriver configuration for -% Adobe's Eurofonts and the Marvosym fount} \label{sec:dvidriver_config} -% -% This section contains information on how to configure dvips and -% \OzTeX\ to use Adobe's Eurofonts and the Marvosym fount. I believe -% that pdf\TeX\ can use dvips entries. -% -% You might find it useful to refer to the file \filename{dvidrive.txt} -% that is created by running \LaTeX\ on \filename{eurofont.ins}: -% \filename{dvidrive.txt} contains a plain text version of this -% \dvidriver configuration information, so you can cut and paste the -% lines you need to the appropriate file on your computer. -% -% If you have any problems with this information, or if you have -% information on how to configure other \dvidriver{}s, please let me -% know by email. -% -% \subsubsection{\Dvidriver configuration lines for Adobe's Eurofonts} -% -% This section contains information for configuring \dvidriver{}s to use -% these \PS Type 1 founts; what you need to do is add the given -% lines to a file so that your \dvidriver knows which \PS Type 1 fount -% file (and so on) corresponds to a particular \filename{tfm} file in a -% \filename{dvi} file. In the case of dvips, the file you add lines to -% is typically called \filename{psfonts.map}. In the case of \OzTeX, you -% will normally add lines to the \filename{Default} configuration file -% -- if you also use dvips, you'll add lines to \filename{psfonts.map} -% as well. -% -% Note that versions of dvips before v5.83 have trouble doing partial fount -% downloading with Adobe's Eurofonts. Because of this, I have listed the -% dvips psfont.map entries with `|<<|' and with `|<|': the `|<<|' -% entries prevent dvips attempting to do partial fount downloading with -% that particular fount. -% -% The `|<<|' syntax does not work with all versions of dvips; it does -% work with dvips~v5.78, but doesn't work with v5.70. If you're using a -% pre `|<<|' dvips, you should use the entries with `|<|' and don't use -% partial fount downloading with any document containing Adobe's -% Eurofonts; passing the |-j0| switch to dvips will prevent it from -% doing partial fount downloading if this is normally turned on. -% -% I've asked the author of dvips when the `|<<|' syntax was first introduced, -% and he can't remember. -% -% I am told that pdf\TeX\ can do partial fount downloading using Adobe's -% Eurofonts. -% -% \paragraph{Eurofont configuration lines for MS-Windows and Unix} -% -% The following lines were supplied by Stefan Ulrich -% |<ulrich@cis.uni-muenchen.de>|, who tells me that you need to re-name -% the \filename{PFB} files \filename{pfb}. -% -% If these lines work with computers other than those running -% MS-Windows and Unix, please let me know so I can change the -% documentation to suit. -% -% The following entries are for dvips~v5.78 and possibly some other -% versions: -%\begin{verbatim} -% zpeurs EuroSans-Regular <<_1______.pfb -% zpeubs EuroSans-Bold <<_1B_____.pfb -% zpeuris EuroSans-Italic <<_1I_____.pfb -% zpeubis EuroSans-BoldItalic <<_1BI____.pfb -% zpeurt EuroMono-Regular <<_2______.pfb -% zpeubt EuroMono-Bold <<_2B_____.pfb -% zpeurit EuroMono-Italic <<_2I_____.pfb -% zpeubit EuroMono-BoldItalic <<_2BI____.pfb -% zpeur EuroSerif-Regular <<_3______.pfb -% zpeub EuroSerif-Bold <<_3B_____.pfb -% zpeuri EuroSerif-Italic <<_3I_____.pfb -% zpeubi EuroSerif-BoldItalic <<_3BI____.pfb -%\end{verbatim} -% -% The following entries are for dvips~v5.70 or earlier, probably dvips -% v5.79 and above, and pdf\TeX. Since that I don't use pdf\TeX, this -% suggestion might not work -- please let me know if you have any -% problems. -%\begin{verbatim} -% zpeurs EuroSans-Regular <_1______.pfb -% zpeubs EuroSans-Bold <_1B_____.pfb -% zpeuris EuroSans-Italic <_1I_____.pfb -% zpeubis EuroSans-BoldItalic <_1BI____.pfb -% zpeurt EuroMono-Regular <_2______.pfb -% zpeubt EuroMono-Bold <_2B_____.pfb -% zpeurit EuroMono-Italic <_2I_____.pfb -% zpeubit EuroMono-BoldItalic <_2BI____.pfb -% zpeur EuroSerif-Regular <_3______.pfb -% zpeub EuroSerif-Bold <_3B_____.pfb -% zpeuri EuroSerif-Italic <_3I_____.pfb -% zpeubi EuroSerif-BoldItalic <_3BI____.pfb -%\end{verbatim} -% -% \paragraph{Eurofont configuration lines for Macs} -% -% Macintosh \filename{psfonts.map} entries for dvips v5.78 and possibly -% some other versions: -%\begin{verbatim} -% zpeur EuroSerif-Regular <<EuroSerReg -% zpeuri EuroSerif-Italic <<EuroSerIta -% zpeub EuroSerif-Bold <<EuroSerBol -% zpeubi EuroSerif-BoldItalic <<EuroSerBolIta -% zpeurs EuroSans-Regular <<EuroSanReg -% zpeuris EuroSans-Italic <<EuroSanIta -% zpeubs EuroSans-Bold <<EuroSanBol -% zpeubis EuroSans-BoldItalic <<EuroSanBolIta -% zpeurt EuroMono-Regular <<EuroMonReg -% zpeurit EuroMono-Italic <<EuroMonIta -% zpeubt EuroMono-Bold <<EuroMonBol -% zpeubit EuroMono-BoldItalic <<EuroMonBolIta -%\end{verbatim} -% -% -% Macintosh \filename{psfonts.map} entries for dvips~v5.70 or before, -% probably dvips v5.79 and above, and pdf\TeX. Since that I don't use -% pdf\TeX, this suggestion might not work -- please let me know if you -% have any problems. -%\begin{verbatim} -% zpeur EuroSerif-Regular <EuroSerReg -% zpeuri EuroSerif-Italic <EuroSerIta -% zpeub EuroSerif-Bold <EuroSerBol -% zpeubi EuroSerif-BoldItalic <EuroSerBolIta -% zpeurs EuroSans-Regular <EuroSanReg -% zpeuris EuroSans-Italic <EuroSanIta -% zpeubs EuroSans-Bold <EuroSanBol -% zpeubis EuroSans-BoldItalic <EuroSanBolIta -% zpeurt EuroMono-Regular <EuroMonReg -% zpeurit EuroMono-Italic <EuroMonIta -% zpeubt EuroMono-Bold <EuroMonBol -% zpeubit EuroMono-BoldItalic <EuroMonBolIta -%\end{verbatim} -% -% -% \OzTeX\ config file entries: these lines are normally added to the -% \filename{Default} config file in \OzTeX's \filename{Configs} folder. -% These lines should work with any version of \OzTeX\ from at least -% version~1.7 onwards. Please let me know if you have any problems. -%\begin{verbatim} -% zpeur EuroSerif-Regular "Euro Serif" nil -% zpeuri EuroSerif-Italic "Euro Serif" nil i -% zpeub EuroSerif-Bold "Euro Serif" nil b -% zpeubi EuroSerif-BoldItalic "Euro Serif" nil bi -% zpeurs EuroSans-Regular "Euro Sans" nil -% zpeuris EuroSans-Italic "Euro Sans" nil i -% zpeubs EuroSans-Bold "Euro Sans" nil b -% zpeubis EuroSans-BoldItalic "Euro Sans" nil bi -% zpeurt EuroMono-Regular "Euro Monospace" nil -% zpeurit EuroMono-Italic "Euro Monospace" nil i -% zpeubt EuroMono-Bold "Euro Monospace" nil b -% zpeubit EuroMono-BoldItalic "Euro Monospace" nil bi -%\end{verbatim} -% -% \subsubsection{\Dvidriver configuration lines for -% Marvosym}\label{sec:dvidriver_config:mvs} -% -% I have been greatly confused while trying to work out how to configure -% \dvidriver{}s to use Marvosym. I think I've got it right, but I can't -% test on anything but my Mac. I'd appreciate an email if you find that -% any of the information below turns out to be wrong. -% -% There are two versions of the Marvosym out there in network land: the -% original, and a version that's been re-worked by Y\&Y. As far as I can -% work out, the Y\&Y version of Marvosym has identical glyphs to the -% original, and differs in that it works properly with ATM and has -% better hinting. This means that the new version should render better -% at low and medium resolutions. In other words, I think the Y\&Y -% version is better than the original. The metrics for the two -% versions are very slightly different to each other, so you should make -% sure you're using the \filename{tfm} file that came with the version -% of the Marvosym fount that you're using. -% -% Dvips \filename{psfonts.map} entries for the original Marvosym fount: -%\begin{verbatim} -% fmvr8x Martin_Vogels_Symbole <marvosym.pfb -% fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <marvosym.pfb -%\end{verbatim} -% -% Dvips \filename{psfonts.map} entries for the Y\&Y `ATM compatible' -% re-worked Marvosym fount: -%\begin{verbatim} -% fmvr8x Marvosym <marvosym.pfb -% fmvri8x Marvosym " .167 SlantFont" <marvosym.pfb -%\end{verbatim} -% -% I have assumed that all \dvidriver{}s that can use \PS Type 1 founts -% can also produce fake italic founts by slanting an upright version. -% Because of this, I have made no provision for \dvidriver{}s that can't -% do this. If you have a \dvidriver that can't fake an italic, please -% let me know and I'll modify the \packname{eurofont} package to take -% this into account, probably by adding another option and writing a -% new \filename{fd} file. -% -% \paragraph{Note for Macintosh users} -% -% A Mac version of the Marvosym fount has been created in \PS Type 1 and -% TrueType versions. It uses the Y\&Y names as above, and -% these lines are be needed for dvips's \filename{psfonts.map} file: -%\begin{verbatim} -% fmvr8x Marvosym <Marvo -% fmvri8x Marvosym " .167 SlantFont" <Marvo -%\end{verbatim} -% And these lines for \OzTeX's default config file: -%\begin{verbatim} -% fmvr8x Marvosym Marvosym nil -% fmvri8x Marvosym Marvosym nil i -%\end{verbatim} -% -% If a version of the original Marvosym fount is ever released for Macs, -% these lines will be needed for dvips's \filename{psfonts.map} file: -%\begin{verbatim} -% fmvr8x Martin_Vogels_Symbole <MartiVogSym -% fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <MartiVogSym -%\end{verbatim} -% And these lines for \OzTeX's default config file: -%\begin{verbatim} -% fmvr8x MartiVogSym "Martin Vogels Symbole" nil -% fmvri8x MartiVogSym "Martin Vogels Symbole" nil i -%\end{verbatim} -% -% \subsection{Metafont founts containing euro symbols}\label{sec:getMFfounts} -% -% The three Metafont sources of euro symbols that I know of are the -% Text Companion founts, the China2e fount, and the Eurosym fount. If -% you know of others, I'd appreciate an email to tell me about them. -% -% The current (October 1998) version of \LaTeX\ is set up to work with -% the relatively new T1 (and TS1) encoded versions of the usual Computer -% Modern founts. If you don't have the `European Computer Modern' and -% `Text Companion' founts -- otherwise known as the EC and TC founts -- -% it might be a good idea to get them now: the TS1 encoded Text -% Companion founts are the ones containing euro symbols. -% -% If the above paragraph doesn't make much sense to you, you can find -% out if your \LaTeX\ has access to the European Computer Modern and -% Text Companion founts by \LaTeX ing this file: -%\begin{verbatim} -% \documentclass{article} -% \usepackage[T1]{fontenc} -% \usepackage{textcomp} -% \begin{document} -% Hello world. \texteuro. -% \end{document} -%\end{verbatim} -% If you get no error messages, you have access to both the European -% Computer Modern (EC) and Text Companion (TC) founts. -% -% If not, you can get these founts, as well as the Eurosym and China2e -% founts and packages, from these locations at your nearest CTAN -% site: -%\begin{verbatim} -% /fonts/ec/ -% /fonts/eurosym/ -% /macros/latex/contrib/supported/china2e/ -%\end{verbatim} -% -% \section{Potentially useful extra information} -% -% Most of the ideas in the \packname{eurofont} package are not my own -% invention, and are documented elsewhere. \LaTeX's fount selection -% scheme, for example, is documented in the file -% \filename{fntguide.tex} which is part of the standard \LaTeX\ -% distribution. The file \filename{simple-nfss.tex} kept in the -% \filename{info/} directory at CTAN is also useful. -% -% If you're interested in understanding the details of the source code, -% you'll probably find it useful to read \filename{clsguide.tex} (also -% part of the standard \LaTeX\ distribution), as well as Leslie -% Lamport's `\LaTeX, a document preparation system', 2nd edition, -% Addison-Wesley. Donald Knuth's `The \TeX book', also published by -% Addison-Wesley, is probably essential reading. Goosens, Mittlebach, -% and Samarin's `The \LaTeX\ Companion', published by Addison-Wesley, is -% apparently a useful source of documentation on the internals of -% \LaTeX; I've found the commented \LaTeX\ source code an adequate -% substitute for this book. -% -% \subsection{Fount families and series}\label{sec:fountfamilies} -% -% \LaTeXe\ comes with a way of selecting founts called the New Fount -% Selection Scheme (NFSS). Each fount you use is specified by five -% things: encoding, family, series, shape, and size. A typical -% specification is |OT1/ptm/m/n at 12pt|. This means an \lfntname{OT1} -% encoded version of \lfntname{ptm} (Adobe Times) family, \lfntname{m} -% (medium) series, \lfntname{n} (normal upright roman) shape, in a size -% of 12pt. The point of the NFSS is to take a particular fount -% specification -- like |OT1/ptm/m/n at 12pt| -- and work out which -% \filename{tfm} file should be used. -% -% This job is essential, because as far as \TeX\ is concerned, a -% \filename{tfm} file \emph{is} a fount: without a \filename{tfm} file, -% you get no letters on the page. A \filename{tfm} file is just a list -% of sizes of each letter and things like that; the actual letter shapes -% are kept elsewhere. The \dvidriver needs to know which \filename{tfm} -% file corresponds to which `real' fount, which is what dvips's -% \filename{psfonts.map} is for. -% -% What the NFSS does is add a high-level interface to let you select a -% particular \filename{tfm} file without having to deal with any of the -% awkward details -- \LaTeX\ has always had some sort of interface to -% allow this sort of thing, but the NFSS is much better than earlier -% efforts, and much, much easier to set up for a new set of founts. -% -% The precise details of exactly which \filename{tfm} file is to be used -% for each fount specification are contained in the various -% \filename{fd} files installed on your computer (they're kept somewhere -% on the tex-inputs path). \filename{ot1ptm.fd}, for example, is -% consulted in the above example. It says that \filename{ptm7t.tfm} -% should be used for |OT1/ptm/m/n| at all sizes. This doesn't mean that -% you can only get Adobe Times in one size, because \TeX\ will scale the -% fount to the appropriate size -- the instruction to do this is -% included in the \filename{fd} file. -% -% You might be wondering what an encoding is. Well, when you type -% information into a computer, each character you type is given a number -% and this number is stored in memory: this number `is' the character -% you have just typed. The relationship between the characters and -% numbers is called an encoding. ASCII encoding, for example, says that -% the letter `A' has the number 65; `B' has the number 66, and so on. In -% the case of \LaTeX, you have two encodings: the input encoding -- -% which is used to translate the input file into \TeX's internal -% encoding (which you can forget about for now); and the output -% encoding, which is used to create the \filename{dvi} file. For -% example, a Mac user might type an \"{o} (number 194) into a -% \filename{tex} file. Assuming that he'd said -% \comname{usepackage[applemac]\ttlb inputenc\ttrb}, that would result -% in the appropriate character appearing in the \filename{dvi} file. -% This character would be represented in the \filename{dvi} file by a -% number 246 if you were using a \lfntname{T1} encoded fount at that -% point. If you were using an \lfntname{OT1} encoded fount, it would be -% represented by a combination of character number 128 (umlaut) placed -% over character number 111 (the letter o). There are many other output -% and input encodings that are commonly used. It is, for example, common -% to use ASCII input encoding, so you have to type |\"{o}| to get \"{o}. -% \LaTeX\ usually sorts out all the details for you so you don't have -% to think about encodings that often. -% -% From the point of view of configuring the \packname{eurofont} package, -% you can probably ignore encodings. The two most common text fount -% encodings used with \LaTeX\ are \lfntname{OT1} and \lfntname{T1}: -% the original 7-bit standard encoding and the newer 8-bit standard -% encoding respectively. -% -% What \packname{eurofont} is most interested in is the fount family -% name. This comes after the encoding: |OT1/ptm|, and is usually a three -% letter abbreviation like \lfntname{ptm} for Adobe Times. The full -% explanation of the naming scheme is presented in the fontname -% documentation\footnote{Available from CTAN: \texttt{/info/fontname/}}. -% In brief, the first letter of this family usually indicates the firm -% that made the fount. Adobe is indicated by a `\lfntname{p}' (for \PS, -% because Adobe created \PS). The next two letters indicates the name of -% the fount. Times is indicated by `\lfntname{tm}'. Not all fount -% families follow this pattern: the Computer Modern families pre-date -% the fontname naming scheme, so (for example) the Computer Modern -% Sanserif family has the name `\lfntname{cmss}'. And some fount families -% named according to the fontname scheme have very strange names. The -% Adobe Euroserif family has the name `\lfntname{zpeur}', the letter -% \lfntname{z} being a prefix meaning `bizarre'. -% -% There's effectively an unlimited range of fount family names. One way -% of finding out what the name is of a particular fount family is using -% \packname{eurofont}'s \comname{showfontfamily} command in your -% document: it'll print the current fount family on the console and in -% the log file. For example, if you \LaTeX\ this file: -%\begin{verbatim} -% \documentclass{article} -% \usepackage{otherfont}% A fictitious package to select a fount -% \usepackage{eurofont} -% \begin{document} -% Blah blah blah -% \showfontfamily -% \end{document} -%\end{verbatim} -% You'll get a message in the log file and the terminal output telling -% you what the fount family used to typeset `Blah blah blah' is. -% -% Another way of finding out a particular fount family name is this: -% files for using different founts with \LaTeX\ -- such as -% \filename{times.sty} -- tend to contain lines like: -%\begin{verbatim} -% \renewcommand{\sfdefault}{phv} -% \renewcommand{\rmdefault}{ptm} -% \renewcommand{\ttdefault}{pcr} -%\end{verbatim} -% This means that the \lfntname{phv} (Adobe Helvetica) family is used -% for \comname{sffamily}, the \lfntname{ptm} family (Adobe Times) family -% is used for \comname{rmfamily}, and the \lfntname{pcr} family (Adobe -% Courier) is used for \comname{ttfamily}. This means you can find out -% which fount family is used by examining the package file you use to -% select it. -% -% If you're interested in the details of producing faked euro -% symbols, the fount series becomes relevant. The normally available -% fount series are just different weights: -% \begin{center} -% \begin{tabular}{ll|ll} -% ul & ultra light & sb & semi bold \\ -% el & extra light & b & bold \\ -% l & light & bx & bold extended\\ -% m & normal (medium) & eb & extra bold \\ -% mb & medium bold & ub & ultra bold \\ -% db & demi bold & \\ -% \end{tabular} -% \end{center} -% Of these, only two are selectable with normal commands. -% \comname{bfseries}, for example, selects the \lfntname{bx} (bold -% extended) series; and \comname{mdseries} selects the \lfntname{m} -% (normal `medium' weight). Most fount families come in two different -% weights only. No normal founts are available in the range of weights -% just listed, although Multiple Master founts (those with a weight -% design axis) can be used in any number of different weights over -% almost any range. If you have produced a Multiple Master fount setup -% that gives you access to the full standard range of \LaTeX\ fount -% series, you are clearly mad\footnote{And probably called something -% like Melissa or Sebastian} and equally clearly don't need me to -% explain anything about the NFSS. -% -% If you want to select something like ultrabold, one way is to say: -%\begin{verbatim} -% \fontseries{ub}\selectfont -%\end{verbatim} -% -% A complication is that some fount families have condensed versions, -% and this has to be indicated by the fount series too. This means -% that the list of `standard' series can be extended to include: -% \begin{center} -% \begin{tabular}{ll|ll} -% ulc & ultra light condensed & dbc & demi bold condensed \\ -% elc & extra light condensed & sbc & semi bold condensed \\ -% lc & light condensed & bc & bold condensed \\ -% mc & normal (medium) condensed & ebc & extra bold condensed \\ -% mbc & medium bold condensed & ubc & ultra bold condensed \\ -% \end{tabular} -% \end{center} -% Likewise, a fount family might have extended version of some weights -% (Computer Modern Roman's Bold Extended is an example of this), so the -% `standard' list of series must also include variants like -% \lfntname{ulx} for ultra light extended. This is only relevant to -% \packname{eurofont} when it's asked to create a faked euro symbol: it -% has to know which series are bold (or whatever) to decide what -% thickness lines to draw across the C. -% -% \section{How \packname{eurofont} works -- in detail} -% \label{sec:how_it_works} -% -% This section is not meant to be a replacement for the rest of the -% documentation for \TeX nical people. The idea is that this is an -% intermediate step between the usual user documentation and the rather -% eccentrically-commented source code -- it's probably a good idea to -% read the earlier parts of this document before digging in to this -% section. -% -% The \packname{eurofont} package provides two commands meant to be used -% in documents for generating a euro symbol: \comname{euro} which just -% prints a euro symbol, and \comname[amount]{euros} which prints a euro -% symbol (generated by the \comname{euro} command) next to the argument -% of the command, with a small space between the two. The euro symbol is -% to the left of the argument by default: if you pass the -% \optname{right} option to the \packname{eurofont} package, the euro -% symbol is printed to the right of the argument of the command. -% -% The \comname{euros} command uses the \comname{euro} command to -% generate the euro symbol, so everything that applies to the -% \comname{euro} command also applies to the \comname{euros} command. -% -% I see the package code as being in several main parts: the code for -% handling the lists, the \comname{euro} command and supporting -% \comname{make...} commands, the other commands for selecting and -% printing euro symbols, and the code to construct fake euro symbols. -% This is an entirely arbitrary division; I mention it in the hope that -% it might explain the way I've divided up this part of the documentation. -% -% Note that the \comname{make...euro} commands are all meant to be -% called directly by the \comname{euro} command; the idea is to give you -% a `top level' set of commands to modify in the configuration file any -% way you like, while still allowing access to any of the euro symbols -% the \packname{eurofont} package is set up to work with by default: -% the \comname{make...euro} commands are all defined in terms of other -% commands, and it's these other commands that do the job of actually -% printing a euro symbol. You might, for example, change the -% \comname{makechinaeeuro} command to print `EUR': -%\begin{verbatim} -% \newcommand{\makechinaeeuro}{EUR} -%\end{verbatim} -% and use entries in the \comname{chinaeeuro} list to select this, rather -% than the euro symbol I intended. Even so, the `lower level' command -% \comname{chinaeeuro} will be unaffected: it will still produce the -% euro symbol from the China2e fount, and you will still be able to use -% it. For example, you might say: -%\begin{verbatim} -% \newcommand{\pgyeuro}{\chinaeeuro} -%\end{verbatim} -% to get a euro symbol from the China2e fount with Adobe Goudy (family -% name \lfntname{pgy}) -% -% A point that might be useful to know is this: the \packname{eurofont} -% package doesn't define the \comname{euro} command when it's loaded -% using the \comname{usepackage\ttlb eurofont\ttrb} command. What -% happens is that \packname{eurofont} defines the \comname{EFeuro} -% command to begin with: \comname{EFeuro} is just \packname{eurofont}'s -% \comname{euro} command under a different name. The \packname{eurofont} -% package arranges for the \comname{euro} command that you use in your -% document to be created later. The way it's done is this: -% \packname{eurofont} adds some code to the \comname{AtBeginDocument} -% hook. This code uses \TeX's \comname{let} command to make the -% \comname{euro} command identical to \comname{EFeuro} at the -% \comname{begin\ttlb document\ttrb} command. Immediately before this, -% the code added by \packname{eurofont} uses \TeX's \comname{let} -% command again to make the \comname{oldeuro} command identical to the -% \comname{euro} command. This means that \packname{eurofont}'s -% definition of \comname{euro} will over-ride any earlier definitions, -% while saving any earlier definitions for you to use. This might also -% explain strange behaviour you encounter if trying to re-define -% \comname{euro} yourself in a document preamble. It's probably best to -% do something like this: -% \label{sec:how_it_works:redefine_euro} -%\begin{verbatim} -% \documentclass{whateveryouwant} -% ... -% \usepackage{eurofont} -% \newcommand{\myeuro}{Some code} -% \AtBeginDocument{\let\euro\myeuro} -% ... -% \begin{document} -%\end{verbatim} -% The \packname{eurosym} package is a special case: if you pass the -% \optname{eurosym} option to \packname{eurofont}, \packname{eurofont} -% uses \comname{let} to make the \comname{ESeuro} command identical to -% \packname{eurosym}'s \comname{euro} command just after -% \packname{eurofont} has loaded \packname{eurosym}. This -% \comname{ESeuro} command appears in \packname{eurofont}'s code in -% various places: remember that it's defined to be whatever the -% \packname{eurosym} package defined the \comname{euro} command to be. -% -% \subsection{The \comname{euro} command}\label{sec:how_euro_works} -% -% The \comname{euro} command works like this: it looks at the current -% fount family (I shall call this \verb|<fam>| for now -- \lfntname{ptm} -% for Adobe Times, \lfntname{cmr} for Computer Modern Roman, and so on), -% and performs the following sequence of tests: -%\begin{verbatim} -%If <fam> is in \userlist, \makeusereuro -% else -% if \<fam>euro exists, \<fam>euro -% else -% if <fam> is in \texteurolist, \maketexteuro -% else -% if <fam> is in \chinaelist, \makechinaeeuro -% else -% if <fam> is in \cmlist, \makecmeuro -% else -% if <fam> is in \serifeurolist, \makeserifeuro -% else -% if <fam> is in \sanseurolist, \makesanseuro -% else -% if <fam> is in \monoeurolist, \makemonoeuro -% else -% if <fam> is in \makefakelighteurolist, \makefakelighteuro -% else -% if <fam> is in \makefakemediumeurolist, \makefakemediumeuro -% else -% if <fam> is in \makefakeheavyeurolist, \makefakeheavyeuro -% else \makedefaulteuro -% fi fi fi fi fi fi fi fi fi fi fi -%\end{verbatim} -% In other words, it first looks to see if the current fount family is -% listed in the \comname{usereurolist}. If it is, it executes the -% \comname{usereuro} command and finishes. If not, it looks to see if a -% command \comname{<fam>euro} exists. For example, if you're typesetting -% with Adobe Times at that point (family name \lfntname{ptm}), it'll -% look for the \comname{ptmeuro} command. If this command exists, it is -% executed and the \comname{euro} command finishes. If not, it looks to -% see if the current fount family is in the \comname{texteurolist}. If -% it is, the \comname{texteuro} command is executed, and the -% \comname{euro} command finishes. This continues to the final test: if -% the current fount family is in the \comname{makefakeheavyeurolist}, -% the \comname{makefakeheavyeuro} command is executed, and the -% \comname{euro}command finishes. If it's got to the end of the tests -% and no match has been found, the \comname{defaulteuro} command is -% executed. -% -% It's up to you to define the \comname{makeusereuro} and -% \comname{<fam>euro} commands. All the other \comname{make...euro} -% commands may be re-defined as you see fit, but are defined by the -% \packname{eurofont} package to produce euro symbols. -% -% \subsection{The \comname{make...euro} commands} -% -% What each of these commands does by default is this: -% -% \subsubsection{\comname{maketexteuro}} -% Executes either the \comname{texteuro} command or the -% \comname{makefakeeuro} command. The \comname{texteuro} command is -% normally defined by the \packname{textcomp} package (part of the -% standard \LaTeX\ distribution) to print a euro symbol from the TS1 -% encoded complement to the current fount. This TS1 encoded complement -% often does not exist, and even if it does exist, it usually (October -% 1998) does not have a euro symbol. The \comname{makefakeeuro} command -% is described in section~\vref{sec:howitworks:makefakeeuro}. The -% \packname{eurofont} package tries to load the \packname{textcomp} -% package by default; see section~\vref{sec:all_options} for more -% details. -% -% The decision on whether to execute \comname{texteuro} or -% \comname{makefakeeuro} is made like this: the \comname{texteuro} -% command is executed if these three conditions are met: 1)~the current -% fount family is not listed in \comname{faketext\-eurolist}, 2)~the -% \packname{textcomp} package has been loaded, and 3)~that the fount -% definition file \filename{ts1<fam>.fd} exists (where |<fam>| is the -% current fount family name). That \filename{fd} file is the thing that -% tells \LaTeX\ where to find the symbol asked for in the -% \comname{texteuro} command defined by the \packname{textcomp} package: -% if it doesn't exist, the current fount family certainly doesn't have a -% euro symbol available in the expected place. -% -% The decision isn't foolproof: there's no way that \TeX\ can check for -% the existence of a real glyph in a fount (the matter is complicated -% greatly by virtual founts and `missing glyph' rule boxes), so -% \comname{maketexteuro}'s checks mustn't be relied on. -% -% \subsubsection{\comname{makefakeeuro}} -% \label{sec:howitworks:makefakeeuro} -% This command first checks to see if the command -% \comname{<fam>fakeeuro} exists, where |<fam>| is the name of the -% current fount family; if this command exists, it's executed. If not, -% \comname{makefakeeuro} then checks for the presence of the current -% fount family name in (in this order) \comname{EFfakelightlist}, -% \comname{EFfakemediumlist}, and \comname{EFfake\-heavylist}. If it finds -% a match, it executes the corresponding \comname{makefake...euro} -% command; these are explained below. If it finds no match, it executes -% the \comname{makefakemediumeuro} command. \comname{makefakeeuro} -% doesn't appear directly in the definition of the \comname{euro} -% command. -% -% \subsubsection{\comname{makechinaeeuro}} -% \label{sec:howitworks:makechinaeeuro} -% Executes the \comname{chinaeeuro} command, which prints a fake -% bold euro symbol created from the China2e fount's euro symbol if the -% current \comname{fontseries} is listed in the -% \comname{EFbold\-serieslist} or the \comname{EFultraboldserieslist}, -% and a straight euro symbol from the China2e fount otherwise. The -% \comname{chinaeeuro} command is described in -% section~\vref{sec:howitworks:chinaeeuro}. -% -% \subsubsection{\comname{makecmeuro}} -% \label{sec:howitworks:makecmeuro} -% If you've given the \optname{eurosym} option to the -% \packname{eurofont} package and the \packname{eurosym} package has -% been loaded successfully, \comname{makecmeuro} executes the -% \comname{ESeuro} command which prints the specified \packname{eurosym} -% euro symbol, as described in section~\vref{sec:howitworks:makecmeuro}. -% Otherwise, the \comname{cmeuro} command is executed, which gives you -% either a euro symbol from the text companion founts, or a faked euro -% symbol; this faked euro symbol is made with light rules for Computer -% Modern Roman and medium weight rules for Computer Modern Sanserif -% and Typewriter. The \comname{cmeuro} command is described in -% section~\vref{sec:howitworks:cmeuro}. -% -% \subsubsection{\comname{makeserifeuro}} -% \label{sec:howitworks:makeserifeuro} -% This executes the \comname{serifeuro} command, described in -% section~\vref{sec:howitworks:serifeuro}. By default, -% \comname{serifeuro} executes the \comname{zpeureuro} command, -% described in section~\vref{sec:howitworks:zpeureuro}, which prints a -% euro symbol from Adobe's Euroserif fount. If you have given the -% \optname{marvosym} option to \packname{eurofont} and you have not used -% the \optname{eurosym} option, the \comname{serifeuro} command will -% instead execute the \comname{marvosymserifeuro} command, described in -% section~\vref{sec:howitworks:marvosymserifeuro}: this will try to -% print a seriffed euro symbol from the Marvosym fount. If the current -% fount series is in \comname{EFboldserieslist} or -% \comname{EFultraboldserieslist}, you'll get a faked bold euro from the -% Marvosym fount. The default setup assumes that your \dvidriver can -% print a faked italic version of the Marvosym fount. -% -% If you've given the \optname{eurosym} option to the -% \packname{eurofont} package and the \packname{eurosym} package has -% been loaded successfully, the \comname{serifeuro} command prints the -% specified \packname{eurosym} euro symbol by executing the -% \comname{ESeuro} command. The \comname{ESeuro} command is described in -% section~\vref{sec:howitworks:ESeuro}. -% -% \subsubsection{\comname{makesanseuro}} -% \label{sec:howitworks:makesanseuro} -% This executes the \comname{sanseuro} command, described in -% section~\vref{sec:howitworks:sanseuro}. By default, \comname{sanseuro} -% executes the \comname{zpeusseuro} command, described in -% section~\vref{sec:howitworks:zpeusseuro}, which prints a euro symbol -% from Adobe's Eurosans fount. If you have given the \optname{marvosym} -% option to \packname{eurofont} and you have not used the -% \optname{eurosym} option, the \comname{sanseuro} command will instead -% execute the \comname{marvosymsanseuro} command, described in -% section~\vref{sec:howitworks:marvosymsanseuro}: this will try to print -% a sanserif euro symbol from the Marvosym fount. If the current fount -% series is in \comname{EFboldserieslist} or the -% \comname{EFultraboldserieslist}, you'll get a faked bold euro from the -% Marvosym fount. The default setup assumes that your \dvidriver can -% print a faked italic version of the Marvosym fount. -% -% If you've given the \optname{eurosym} option to the -% \packname{eurofont} package and the \packname{eurosym} package has -% been loaded successfully, the \comname{sanseuro} command prints the -% specified \packname{eurosym} euro symbol by executing the \comname{ESeuro} -% command. -% -% \subsubsection{\comname{makemonoeuro}} -% \label{sec:howitworks:makemonoeuro} -% This executes the \comname{monoeuro} command, described in -% section~\vref{sec:howitworks:monoeuro}. By default, -% \comname{monoeuro} executes the \comname{zpeutteuro} command, -% described in section~\vref{sec:howitworks:zpeutteuro}, which prints a -% euro symbol from Adobe's Euroserif fount. If you have given the -% \optname{marvosym} option to \packname{eurofont} and you have not used -% the \optname{eurosym} option, the \comname{monoeuro} command will -% instead execute the \comname{marvosymmonoeuro} command, described in -% section~\vref{sec:howitworks:marvosymserifeuro}: this will try to -% print a monospaced euro symbol from the Marvosym fount. If the current -% fount series is in \comname{EFboldserieslist} or -% \comname{EFultraboldserieslist}, you'll get a faked bold euro from the -% Marvosym fount. The default setup assumes that your \dvidriver can -% print a faked italic version of the Marvosym fount. -% -% If you've given the \optname{eurosym} option to the -% \packname{eurofont} package and the \packname{eurosym} package has -% been loaded successfully, the \comname{sanseuro} command prints the -% specified \packname{eurosym} euro symbol by executing the \comname{ESeuro} -% command. -% -% \subsubsection{\comname{makefakelighteuro}} -% \label{sec:howitworks:makefakelighteuro} -% If the command \comname{<fam>fakeeuro} exists (where |<fam>| is the -% name of the current fount family), execute it. Otherwise, execute the -% \comname{fakelighteuro} command, which prints a euro symbol faked from -% a letter C with two light rules printed over it; you can find out more -% about this in section~\vref{sec:howitworks:fakelighteuro}. The -% \comname{makefakelighteuro} command is unaffected by the -% \optname{eurosym} option. -% -% -% \subsubsection{\comname{makefakemediumeuro}} -% \label{sec:howitworks:makefakemediumeuro} -% If the command \comname{<fam>fakeeuro} exists (where |<fam>| is the -% name of the current fount family), execute it. Otherwise, execute the -% \comname{fakemediumeuro} command, which prints a euro symbol faked -% from a letter C with two light rules printed over it; you can find out -% more about this in section~\vref{sec:howitworks:fakemediumeuro}. The -% \comname{makefakemediumeuro} command is unaffected by the -% \optname{eurosym} option. -% -% \subsubsection{\comname{makefakeheavyeuro}} -% \label{sec:howitworks:makefakeheavyeuro} -% If the command \comname{<fam>fakeeuro} exists (where |<fam>| is the -% name of the current fount family), execute it. Otherwise, execute the -% \comname{fakeheavyeuro} command, which prints a euro symbol faked -% from a letter C with two light rules printed over it; you can find out -% more about this in section~\vref{sec:howitworks:fakeheavyeuro}. The -% \comname{makefakeheavyeuro} command is unaffected by the -% \optname{eurosym} option. -% -% \subsubsection{\comname{makedefaulteuro}} -% \label{sec:howitworks:makedefaulteuro} -% Executes the \comname{makefakeeuro} command. This usually prints a -% euro faked with medium weight rules. See -% section~\vref{sec:howitworks:makefakeeuro} for more details. -% -% \subsection{Other commands to print euro symbols} -% -% \subsubsection{\comname{chinaeeuro}} -% \label{sec:howitworks:chinaeeuro} -% -% This prints the euro symbol from the China2e fount. There is only one -% euro character available, in the upright shape and medium weight only. -% This command uses the \comname{SelectOnWeight} command to print either -% a China2e euro symbol in its natural state (for light and medium -% weights), or a `poor man's bold' version for bold and ultra bold -% weights. -% -% The \comname{SelectOnWeight} command is described in -% section~\vref{sec:howitworks:selectonweight}. -% -% \subsubsection{\comname{cmeuro}} -% \label{sec:howitworks:cmeuro} -% -% The \comname{cmeuro} command executes the \comname{texteuro} command to -% print a euro symbol from the TS1 encoded complement of the current -% fount if these three conditions are met: 1) the current fount family -% is not in the \comname{faketexteurolist}; 2) the command -% \comname{texteuro} exists; and 3) the file \filename{ts1<fam>.fd} -% exists, where \filename{<fam>} is the name of the current fount -% family. If all three conditions are not met, \comname{cmeuro} executes -% the \comname{makefakeeuro} command to print a faked euro symbol; this -% command is described in section~\vref{sec:howitworks:makefakeeuro}. -% -% \subsubsection{\comname{EFeuro}} -% \label{sec:howitworks:EFeuro} -% -% This is the name under which the \comname{euro} command is defined -% originally; the \packname{eurofont} package adds some code to the -% standard \LaTeX\ \comname{AtBeginDocument} hook that makes the -% \comname{euro} command equivalent to the \comname{EFeuro} command -% (using the primitive \TeX\ \comname{let} command). This code added to -% the \comname{AtBeginDocument} hook is executed, unsurprisingly, at the -% \comname{begin\ttlb document\ttrb} command. It's best not to use the -% \comname{EFeuro} command yourself unless you have a particular need -% to, but if you're writing a class or package file that uses -% \packname{eurofont}, you might have such a need. -% -% The \comname{EFeuro} command is identical to the \comname{euro} -% command, but they are different commands. If you want to change the -% \comname{euro} command in your document, you should do so after the -% \comname{begin\ttlb document\ttrb} command. One suggestion on how to -% do this is in section~\vref{sec:how_it_works:redefine_euro}. This way -% of re-defining the \comname{euro} command means you still have access -% to \packname{eurofont}'s original \comname{euro} command under the -% name \comname{EFeuro}. The \comname{EFeuro} command shouldn't be used -% directly in a \LaTeX\ document. It's not that anything terrible will -% happen if you do, just that \LaTeX\ convention states that commands -% with mixed-case names are meant for use by class and package writers -% only, and it seemed right to me to add this restriction to the -% \comname{EFeuro} command. -% -% \subsubsection{\comname{ESeuro}} -% \label{sec:howitworks:ESeuro} -% -% If you tell the \packname{eurofont} package to load the -% \packname{eurosym} package, \packname{eurofont} makes the -% \comname{ESeuro} command identical to the \comname{euro} command -% defined by \packname{eurosym}. This means that \packname{eurosym}'s -% \comname{euro} command is still available as \comname{ESeuro}, even -% though \packname{eurofont} re-defines the \comname{euro} command to be -% something completely different. It's probably best not to use the -% \comname{ESeuro} command unless you have no choice in the matter, as -% is often the case when writing package files. -% -% In case you're wondering, the \comname{ESeuro} command will be the -% same as the \comname{oldeuro} command if \packname{eurofont} has -% loaded \packname{eurosym}. -% -% \subsubsection{\comname{oldeuro}} -% \label{sec:howitworks:oldeuro} -% -% The \packname{eurofont} package adds another bit of code to the -% \comname{AtBeginDocument} hook: this code not only sets the -% \comname{euro} command to be whatever \comname{EFeuro} has been -% defined as (as mentioned in section~\vref{sec:howitworks:EFeuro}), but -% just before that, the code sets the \comname{oldeuro} command to be -% whatever the \comname{euro} command was at that instant. This means -% that any package which has defined a \comname{euro} command has not -% wasted its effort: its command is still available as -% \comname{oldeuro}. -% -% As mentioned above, the \comname{ESeuro} command will be the -% same as the \comname{oldeuro} command if \packname{eurofont} has -% loaded \packname{eurosym}. -% -% -% \subsubsection{\comname{sanseuro}} -% \label{sec:howitworks:sanseuro} -% -% Depending on what you've asked for in the options to the -% \packname{eurofont} package, this command executes one of three -% commands. By default, or if you've used the \optname{adobeeurofonts} -% option, it executes \comname{zpeusseuro}; if you've used the -% \optname{marvosym} option, it executes \comname{marvosymsanseuro}; and -% if you've used the eurosym option (which over-rides the other two), it -% executes \comname{ESeuro}. -% -% The \comname{zpeusseuro} command is described in -% section~\vref{sec:howitworks:zpeusseuro}; the -% \comname{marvosymsans\-euro} is described in -% section~\vref{sec:howitworks:marvosymsanseuro}; and the -% \comname{ESeuro} command is described in -% section~\vref{sec:howitworks:ESeuro}. -% -% \subsubsection{\comname{serifeuro}} -% \label{sec:howitworks:serifeuro} -% -% Depending on what you've asked for in the options to the -% \packname{eurofont} package, this command executes one of three -% commands. By default, or if you've used the \optname{adobeeurofonts} -% option, it executes \comname{zpeureuro}; if you've used the -% \optname{marvosym} option, it executes \comname{marvosymserifeuro}; and -% if you've used the eurosym option (which over-rides the other two), it -% executes \comname{ESeuro}. -% -% The \comname{zpeureuro} command is described in -% section~\vref{sec:howitworks:zpeureuro}; the -% \comname{marvosymserif\-euro} is described in -% section~\vref{sec:howitworks:marvosymserifeuro}; and the -% \comname{ESeuro} command is described in -% section~\vref{sec:howitworks:ESeuro}. -% -% \subsubsection{\comname{monoeuro}} -% \label{sec:howitworks:monoeuro} -% -% Depending on what you've asked for in the options to the -% \packname{eurofont} package, this command executes one of three -% commands. By default, or if you've used the \optname{adobeeurofonts} -% option, it executes \comname{zpeutteuro}; if you've used the -% \optname{marvosym} option, it executes \comname{marvosymmonoeuro}; and -% if you've used the eurosym option (which over-rides the other two), it -% executes \comname{ESeuro}. -% -% The \comname{zpeutteuro} command is described in -% section~\vref{sec:howitworks:zpeureuro}; the -% \comname{marvosymmono\-euro} is described in -% section~\vref{sec:howitworks:marvosymmonoeuro}; and the -% \comname{ESeuro} command is described in -% section~\vref{sec:howitworks:ESeuro}. -% -% \subsubsection{\comname{zpeureuro}} -% \label{sec:howitworks:zpeureuro} -% -% This command prints a euro symbol from one of Adobe's four Euroserif -% founts (Roman, Italic, Bold, or Bold Italic). The selection is done -% using \LaTeX's usual fount selection mechanism. -% -% \subsubsection{\comname{zpeusseuro}} -% \label{sec:howitworks:zpeusseuro} -% -% This command prints a euro symbol from one of Adobe's four Eurosans -% founts (Roman, Italic, Bold, or Bold Italic). The selection is done -% using \LaTeX's usual fount selection mechanism. -% -% \subsubsection{\comname{zpeutteuro}} -% \label{sec:howitworks:zpeutteuro} -% -% This command prints a euro symbol from one of Adobe's four Euromono -% founts (Roman, Italic, Bold, or Bold Italic). The selection is done -% using \LaTeX's usual fount selection mechanism. -% -% \subsubsection[\comname{marvosymeuro}] -% {\comname{marvosymeuro}\comarg{char}} -% \label{sec:howitworks:marvosymeuro} -% -% This command is used by \comname{marvosymserifeuro} (and friends) to -% print a euro symbol from the Marvosym fount. Like the -% \comname{chinaeeuro} command, it uses the \comname{SelectOnWeight} -% command -- covered in section~\vref{sec:howitworks:selectonweight} -- -% to print a normal euro symbol for medium and light weight founts, and -% produces a `poor man's bold' version when you're using a bold or ultra -% bold fount. -% -% The \comname{marvosymeuro} command takes a single argument, which is -% the number of the character to be printed: 99 for the sanserif euro symbol, -% 100 for the monospaced euro symbol, and 101 for the seriffed euro symbol. -% -% \subsubsection{\comname{marvosymsanseuro}} -% \label{sec:howitworks:marvosymsanseuro} -% -% The \comname{marvosymsanseuro} command prints a sanserif euro -% symbol from the Marvosym fount by executing -% \comname{marvosymeuro\ttlb 99\ttrb}. -% -% \subsubsection{\comname{marvosymserifeuro}} -% \label{sec:howitworks:marvosymserifeuro} -% -% The \comname{marvosymsanseuro} command prints a seriffed euro -% symbol from the Marvosym fount by executing -% \comname{marvosymeuro\ttlb 101\ttrb}. -% -% \subsubsection{\comname{marvosymmonoeuro}} -% \label{sec:howitworks:marvosymmonoeuro} -% -% The \comname{marvosymsanseuro} command prints a monospaced euro -% symbol from the Marvosym fount by executing -% \comname{marvosymeuro\ttlb 100\ttrb}. -% -% \subsubsection{\comname{cmrfakeeuro}} -% \label{sec:howitworks:cmrfakeeuro} -% -% This command creates a euro symbol faked with light rules, using the -% \comname{fakelight\-euro} command which is described in -% section~\vref{sec:howitworks:fakelighteuro}. Note that the -% \comname{euro} command will execute \comname{<fam>fakeeuro} (where -% |<fam>| is the current fount family) if it's asked to fake a euro -% symbol using any of the \comname{makefake...euro} commands. This means -% that you need to re-define \comname{cmrfakeeuro} if you want to change -% the sort of faked euro symbol you get with Computer Modern Roman; just -% putting |cmr| in (say) \comname{fakemediumlist} won't do the job. -% -% \subsubsection{\comname{cmssfakeeuro}} -% \label{sec:howitworks:cmssfakeeuro} -% -% This command creates a euro symbol faked with medium rules, using the -% \comname{fake\-mediumeuro} command which is described in -% section~\vref{sec:howitworks:fakemediumeuro}. Note that the -% \comname{euro} command will execute \comname{<fam>fakeeuro} (where -% |<fam>| is the current fount family) if it's asked to fake a euro -% symbol using any of the \comname{makefake...euro} commands. This means -% that you need to re-define \comname{cmssfakeeuro} if you want to -% change the sort of faked euro symbol you get with Computer Modern -% Sanserif; just putting |cmss| in (say) \comname{fakelightlist} won't -% do the job. -% -% \subsubsection{\comname{cmttfakeeuro}} -% \label{sec:howitworks:cmttfakeeuro} -% -% This command creates a euro symbol faked with medium rules, using the -% \comname{fake\-mediumeuro} command which is described in -% section~\vref{sec:howitworks:fakemediumeuro}. Note that the -% \comname{euro} command will execute \comname{<fam>fakeeuro} (where -% |<fam>| is the current fount family) if it's asked to fake a euro -% symbol using any of the \comname{makefake...euro} commands. This means -% that you need to re-define \comname{cmttfakeeuro} if you want to -% change the sort of faked euro symbol you get with Computer Modern -% Typewriter; just putting |cmtt| in (say) \comname{fakelightlist} won't -% do the job. -% -% \subsubsection{\comname{pzcfakeeuro}} -% \label{sec:howitworks:pzcfakeeuro} -% -% This command creates a euro symbol faked with medium rules, using the -% \comname{fakemediumeuro[-0.1ex]} command. The optional argument -% lowers the height of the cross-strokes by 0.1\,ex to match the C in -% Zapf Chancery. -% -% Note that the \comname{euro} command will execute -% \comname{<fam>fakeeuro} (where |<fam>| is the current fount family) if -% it's asked to fake a euro symbol using any of the -% \comname{makefake...euro} commands. This means that you need to -% re-define \comname{pzcfakeeuro} if you want to change the sort of -% faked euro symbol you get with Zapf Chancery; just putting |pzc| in -% (say) \comname{fakelightlist} won't do the job. -% -% \subsection{Commands used to produce faked euro symbols} -% -% \subsubsection[\comname{fakeheavyeuro}] -% {\comname{fakeheavyeuro}\comoptarg{lift}\comoptarg{slant corr}} -% \label{sec:howitworks:fakeheavyeuro} -% -% This is one of three similar commands: this command prints a euro -% symbol faked with heavy rules. It's executed by the \comname{euro} -% command if the current fount family is in the \comname{fakeheavylist}. -% It takes two optional arguments: the first one, \comoptarg{lift}, -% lifts the cross-strokes of the faked euro symbol by the specified -% length; the default length is 0\,pt. The second optional argument, -% \comoptarg{slant corr}, is a percentage factor by which the nominal -% slant of the fount is multiplied by before calculating the horizontal -% position of the rules. Its default value is 100 (i.e., multiply the -% slant by $100/100 = 1$); this argument never has any effect on upright -% founts because they have no slant. -% -% If you pass one optional argument to \comname{fakeheavyeuro}, it is -% interpreted as being the \comoptarg{lift} argument. -% -% \comname{fakeheavyeuro} is defined to be one of these three: -% \begin{center} -% \begin{tabular}{ll} -% \textbf{Option} & \textbf{Command} \\[1ex] -% \optname{noslantfakeeuro} & \comname{heavyruleeuronoslant} \\ -% \optname{normalslantfakeeuro} & \comname{heavyruleeuronorm} \\ -% \optname{bigslantfakeeuro} & \comname{heavyruleeurobigslant} \\ -% \end{tabular} -% \end{center} -% The optional argument to \comname{fakeheavyeuro} is passed as the -% first argument (rule lift) to the given \comname{heavyrule\-euro...} -% command; it's 0\,ex by default. The second argument (slant -% correction factor) to the \comname{heavyrule\-euro...} command is -% left blank, so it defaults to 100. See -% section~\vref{sec:howitworks:EFruleeuro} for more about this. -% -% This command was written for the sake of symmetry more than -% anything else; I would be surprised if anyone found a real use for -% it. -% -% \subsubsection[\comname{fakelighteuro}] -% {\comname{fakelighteuro}\comoptarg{lift}\comoptarg{slant corr}} -% \label{sec:howitworks:fakelighteuro} -% -% This is one of three similar commands: this command prints a euro symbol -% faked with light rules. It's executed by the \comname{euro} command if -% the current fount family is in the \comname{fakelightlist}. It takes -% two optional arguments: the first one, \comoptarg{lift}, lifts the -% cross-strokes of the faked euro symbol by the specified length; the -% default length is 0\,pt. The second optional argument, \comoptarg{slant -% corr}, is a percentage factor by which the nominal slant of the fount -% is multiplied by before calculating the horizontal position of the -% rules. Its default value is 100 (i.e., multiply the -% slant by $100/100 = 1$); this argument never has any effect on upright -% founts because they have no slant. -% -% If you pass one optional argument to \comname{fakeheavyeuro}, it is -% interpreted as being the \comoptarg{lift} argument. -% -% \comname{fakelighteuro} is defined by the options in -% \packname{eurofont} to be one of these three; -% \comname{lightruleeuronorm} by default. -% \begin{center} -% \begin{tabular}{ll} -% \textbf{Option} & \textbf{Command} \\[1ex] -% \optname{noslantfakeeuro} & \comname{lightruleeuronoslant} \\ -% \optname{normalslantfakeeuro} & \comname{lightruleeuronorm} \\ -% \optname{bigslantfakeeuro} & \comname{lightruleeurobigslant} \\ -% \end{tabular} -% \end{center} -% The optional argument to \comname{fakelighteuro} is passed as the -% first argument (rule lift) to the given \comname{lightrule\-euro...} -% command; it's 0\,ex by default. The second argument (slant -% correction factor) to the \comname{lightrule\-euro...} command is -% left blank, so it defaults to 100. See -% section~\vref{sec:howitworks:EFruleeuro} for more about this. -% -% \subsubsection[\comname{fakemediumeuro}] -% {\comname{fakemediumeuro}\comoptarg{lift}\comoptarg{slant corr}} -% \label{sec:howitworks:fakemediumeuro} -% -% This is one of three similar commands: this command prints a euro symbol -% faked with light rules. It's executed by the \comname{euro} command if -% the current fount family is in the \comname{fakemediumlist}. It takes -% two optional arguments: the first one, \comoptarg{lift}, lifts the -% cross-strokes of the faked euro symbol by the specified length; the -% default length is 0\,pt. The second optional argument, \comoptarg{slant -% corr}, is a percentage factor by which the nominal slant of the fount -% is multiplied by before calculating the horizontal position of the -% rules. Its default value is 100 (i.e., multiply the -% slant by $100/100 = 1$); this argument never has any effect on upright -% founts because they have no slant. -% -% If you pass one optional argument to \comname{fakeheavyeuro}, it is -% interpreted as being the \comoptarg{lift} argument. -% -% \comname{fakemediumeuro} is defined by the options in -% \packname{eurofont} to be one of these three; -% \comname{lightruleeuronorm} by default. -% \begin{center} -% \begin{tabular}{ll} -% \textbf{Option} & \textbf{Command} \\[1ex] -% \optname{noslantfakeeuro} & \comname{mediumruleeuronoslant} \\ -% \optname{normalslantfakeeuro} & \comname{mediumruleeuronorm} \\ -% \optname{bigslantfakeeuro} & \comname{mediumruleeurobigslant} \\ -% \end{tabular} -% \end{center} -% The optional argument to \comname{fakemediumeuro} is passed as the -% first argument (rule lift) to the given \comname{mediumrule\-euro...} -% command; it's 0\,ex by default. The second argument (slant -% correction factor) to the \comname{mediumrule\-euro...} command is -% left blank, so it defaults to 100. See -% section~\vref{sec:howitworks:EFruleeuro} for more about this. -% -% \subsubsection{\comname{EFruleeuro}}\label{sec:EFruleeuro} -% \label{sec:howitworks:EFruleeuro} -% -% The command generates a euro symbol from a `C' with a pair of rules -% drawn on top of it. \comname{EFruleeuro} is not meant to be used in -% documents directly; if you need it, you should follow the -% \packname{eurofont} package's example and use it in the definition of -% a new command to generate a euro symbol. The -% \comname{mediumruleeuronorm} command and others show you a way of -% doing this. -% -% \comname{EFruleeuro} has six arguments: -% \begin{center} -%\begin{tabbing} -% \comname{EFruleeuro}\= \\ -% \> \comarg{backshift \%age}\comarg{top rule width \%age}\relax -% \comarg{bottom rule width \%age}\\ -% \> \comarg{rule thickness}\comarg{rule vertical spacing}\relax -% \comarg{rule vertical offset}\\ -% \> \comarg{slant correction factor \%age}\\ -%\end{tabbing} -% \end{center} -% -% The first three arguments are numbers which are interpreted as a -% percentage of the width of a letter `C' in the current fount. The next -% three arguments are normal \LaTeX\ lengths. The final argument is -% another number that's interpreted as a percentage: it's the percentage -% by which the nominal slant of a fount (as specified in the -% \filename{tfm} file) is multiplied by before working out the -% horizontal position of the cross-strokes of a faked euro symbol; if -% this slant correction factor argument is left blank, it defaults to -% 100 (multiply by $100/100 = 1$, so it has no effect), which is what it -% should be most of the time. This slant correction factor never has any -% effect on upright founts, since they have a slant of 0. -% -% The \comarg{rule vertical offset} and \comarg{slant correction factor -% \%age} arguments are needed because the letters as printed are -% sometimes not quite what the metrics files would have you believe. -% -% The way the whole thing works is this: the \comname{EFruleeuro} -% command begins by putting a letter `C' on the page. It then backs up -% by |<backshift>|, and draws the two rules. Each rule is -% |<rule thickness>| thick, and the centre lines of the rules are -% separated by a vertical distance of |<rule spacing>| (if this -% dimension is 0\,pt, the rules are printed on top of each other and it -% appears that you only have one rule printed). The top rule has a -% horizontal length of |<top rule width>|, and the bottom rule has a -% horizontal length of |<bottom rule width>|. The rules are positioned -% half-way up the `C', plus |<rule vertical offset>|; this parameter is -% needed because some letters have metrics that don't quite tie up with -% reality. For example, the C in Zapf Chancery is actually lower than -% the metrics would suggest, so \packname{eurofont}'s calculations go -% awry and a `hand-correction' of -0.1\,ex needs to be applied. The -% following code is executed by \packname{eurofont}'s -% \comname{pzcfakeeuro} command: -%\begin{verbatim} -% \EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{-0.1ex}{} -%\end{verbatim} -% This creates a euro symbol faked from a `C' with a pair of horizontal -% rules drawn across it. -% -% These rules have their left-hand edge 110\% of the width of the C to -% the left of the right-hand edge of the C. The top rule has a width of -% 80\% of the width of the C; the bottom rule has a width of 72\% of the -% width of the C. -% -% The rules are 0.04\,ex thick, and the distance between the centre -% lines of the rules is 0.27\,ex. The centre line of the pair of rules -% is usually half way up the C according to the fount metrics; in this -% case, these rules are shifted down from this position by 0.1\,ex. -% -% If the C used by \comname{EFruleeuro} is an italic C, the code to -% place the rules takes this into account: it shifts the rules an -% appropriate amount to the right. The rules are also staggered slightly -% to match the slant of the C -- rather than put both rules directly -% above each other at the specified position (taking the italic -% correction into account), the top rule is placed a touch to the -% right and the bottom rule a touch to the left. -% -% And this brings me on to the final parameter: the slant correction -% factor. This is needed because some founts have italic or oblique -% versions in which the slant angle specified in the fount metrics file -% doesn't match the real slant of the printed letters. I have no idea -% why this is the case, but I do know that it means that -% \comname{EFruleeuro}'s careful calculations to place the rules -% correctly produce ugly results when working with these slanted -% founts. This slant correction factor is the percentage by which the -% slant parameter is scaled by. If the rules are being printed too far -% to the left (so that they protrude out the back of the C too far), you -% might try something like this: -%\begin{verbatim} -% \EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{0ex}{200} -%\end{verbatim} -% which works very well with Adobe Optima -- the line above tells the -% command to work on the basis that the slant is twice as great as -% specified in the metrics file. Since the \packname{fontinst}-generated -% \filename{tfm} file has the slant as $11^{\circ}$ ($1^{\circ}$ less -% than in the \filename{afm} file due to rounding errors), and the slant -% I measured is $21^{\circ}$, you can see that this should work well; -% if you have this fount youself, you will see that it does indeed work -% very well. -% -% On the other hand, Bitstream Optima has a specified slant of -% $10^{\circ}$, but a measured slant of $5^{\circ}$. This means the -% rules are placed too far to the right, so they don't protrude out the -% back of the C far enough. The obvious thing to try in this case is: -%\begin{verbatim} -% \EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{0ex}{50} -%\end{verbatim} -% which is a definite improvement but far from perfect. This is because -% the italic C in this fount is positioned further to the left than -% expected for reasons which are rather involved. There's no easy -% and good way to deal with this without adding yet another parameter to -% the \comname{EFruleeuro} command, which I decided wasn't justified. In -% the case of Bitstream Optima, you might prefer the results you get -% with a slant correction factor of 25\% or perhaps even 0\%. -% -% A final note: in an attempt to reduce the Byzantine complexity of the -% \comname{EFruleeuro} command to manageable levels, I have assumed that -% the cross-strokes do not extend beyond the right-hand limit of the -% letter `C' which they're printed over. This shouldn't cause any -% problems unless you do something strange. -% -% \subsubsection[\comname{mediumruleeuronorm}] -% {\comname{mediumruleeuronorm}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:mediumruleeuronorm} -% -% This command uses the \comname{SelectOnWeight} command (see -% section~\vref{sec:howitworks:selectonweight}) to print a faked euro -% symbol intended to match a medium weight fount family like Times: -% thicker rules are used for bolder founts in the family, and thinner -% rules are used for lighter founts in the family. The two rules drawn -% across the C have slightly different lengths, approximately the same -% as in the official euro symbol. -% -% \comname{mediumruleeuronorm} takes two arguments: the first, the -% length \comarg{lift}, raises the cross-stroke rules by the specified -% amount from their default position half way up the `C'; and the -% second, the number \comarg{slant corr}, is interpreted as the -% percentage by which the specified slant of the current fount is -% multiplied before calculating the horizontal position of the -% cross-strokes. See the explanation of \comname{EFruleeuro} in -% section~\vref{sec:howitworks:EFruleeuro} for a fuller description of -% these parameters with examples. -% -% \subsubsection[\comname{mediumruleeuronoslant}] -% {\comname{mediumruleeuronoslant}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:mediumruleeuronoslant} -% -% This command uses the \comname{SelectOnWeight} command (see -% section~\vref{sec:howitworks:selectonweight}) to print a faked euro -% symbol intended to match a medium weight fount family like Times: -% thicker rules are used for bolder founts in the family, and thinner -% rules are used for lighter founts in the family. The two rules drawn -% across the C have the same length. -% -% \comname{mediumruleeuronoslant} takes two arguments: the first, the -% length \comarg{lift}, raises the cross-stroke rules by the specified -% amount from their default position half way up the `C'; and the -% second, the number \comarg{slant corr}, is interpreted as the -% percentage by which the specified slant of the current fount is -% multiplied before calculating the horizontal position of the -% cross-strokes. See the explanation of \comname{EFruleeuro} in -% section~\vref{sec:howitworks:EFruleeuro} for a fuller description of -% these parameters with examples. -% -% \subsubsection[\comname{mediumruleeurobigslant}] -% {\comname{mediumruleeurobigslant}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:mediumruleeurobigslant} -% -% This command uses the \comname{SelectOnWeight} command (see -% section~\vref{sec:howitworks:selectonweight}) to print a faked euro -% symbol intended to match a medium weight fount family like Times: -% heavier rules are used for bolder founts in the family, and lighter -% rules are used for lighter founts in the family. The two rules drawn -% across the C have quite different lengths, following the example of -% the China2e euro symbol. -% -% \comname{mediumruleeurobigslant}takes two arguments: the first, the -% length \comarg{lift}, raises the cross-stroke rules by the specified -% amount from their default position half way up the `C'; and the -% second, the number \comarg{slant corr}, is interpreted as the -% percentage by which the specified slant of the current fount is -% multiplied before calculating the horizontal position of the -% cross-strokes. See the explanation of \comname{EFruleeuro} in -% section~\vref{sec:howitworks:EFruleeuro} for a fuller description of -% these parameters with examples. -% -% \subsubsection[\comname{lightruleeuronorm}] -% {\comname{lightruleeuronorm}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:lightruleeuronorm} -% -% This command behaves the same as \comname{mediumruleeuronorm} (see -% section~\vref{sec:howitworks:mediumruleeuronorm}), but uses lighter -% rules meant to match a fount family like Computer Modern Roman. -% -% \subsubsection[\comname{lightruleeuronoslant}] -% {\comname{lightruleeuronoslant}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:lightruleeuronoslant} -% -% This command behaves the same as \comname{mediumruleeuronoslant} (see -% section~\vref{sec:howitworks:mediumruleeuronoslant}), but uses lighter rules -% meant to match a fount family like Computer Modern Roman. -% -% \subsubsection[\comname{lightruleeurobigslant}] -% {\comname{lightruleeurobigslant}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:lightruleeurobigslant} -% -% This command behaves the same as \comname{mediumruleeurobigslant} (see -% section~\vref{sec:howitworks:mediumruleeurobigslant}), but uses -% lighter rules meant to match a fount family like Computer Modern -% Roman. -% -% \subsubsection[\comname{heavyruleeuronorm}] -% {\comname{heavyruleeuronorm}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:heavyruleeuronorm} -% -% This command behaves the same as \comname{mediumruleeuronorm} (see -% section~\vref{sec:howitworks:mediumruleeuronorm}), but uses heavier -% rules that aren't likely to match anything but a few display founts. -% -% \subsubsection[\comname{heavyruleeuronoslant}] -% {\comname{heavyruleeuronoslant}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:heavyruleeuronoslant} -% -% This command behaves the same as \comname{mediumruleeuronoslant} (see -% section~\vref{sec:howitworks:mediumruleeuronoslant}), but uses heavier -% rules that aren't likely to match anything but a few display founts. -% -% \subsubsection[\comname{heavyruleeurobigslant}] -% {\comname{heavyruleeurobigslant}\comarg{lift}\comarg{slant corr}} -% \label{sec:howitworks:heavyruleeurobigslant} -% -% This command behaves the same as \comname{mediumruleeurobigslant} (see -% section~\vref{sec:howitworks:mediumruleeurobigslant}), but uses -% heavier rules that aren't likely to match anything but a few display -% founts. -% -% \subsection{Other supporting commands} -% -% \subsubsection{\comname{showfontfamily}} -% \label{sec:howitworks:showfontfamily} -% -% This command displays the current fount family name on the console, -% and also notes the same information in the log file. It's meant to -% be used if you're configuring \packname{eurofont}, but aren't sure -% what a particular fount family name is. -% -% If you don't know what a fount family name is in \LaTeX, have a look -% at section~\vref{sec:fountfamilies}. -% -% \subsubsection[\comname{SelectOnWeight}] -% {\comname{SelectOnWeight} -% \comarg{light}\comarg{medium}\comarg{bold}\comarg{ultrabold}} -% \label{sec:howitworks:selectonweight} -% -% This command takes four arguments: the first is executed if the -% current fount series is listed in \comname{lightserieslist}; the -% second if the current fount series is in the -% \comname{mediumserieslist}; the third if it's in the -% \comname{boldserieslist}; and the fourth if it's in the -% \comname{ultraboldserieslist}. If the current fount series isn't -% listed in any of these lists, the second argument (used for medium -% weight founts) is executed. -% -% A typical use of \comname{SelectOnWeight} is this: -%\begin{verbatim} -% \newcommand{\mediumruleeuronorm}[2]{% -% \SelectOnWeight% -% {\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light -% {\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium -% {\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold -% {\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold -% } -%\end{verbatim} -% This defines the \comname{mediumruleeuro} command so that it'll print -% one of four different faked euro symbols, depending on the weight of the -% current fount: lighter weight founts get a euro symbol faked with lighter -% rules; the heavier the fount, the heavier the rules. If the fount -% series isn't in any of the lists, you get the rules used for the medium -% weight series. -% -% Section~\vref{sec:config} shows what's in the four different -% \comname{EF...serieslist} commands by default. -% -% \subsubsection[\comname{EFaddtolist}] -% {\comname{EFaddtolist}\comarg{list name}\comarg{items to add}} -% \label{sec:howitworks:EFaddtolist} -% -% This command takes two arguments: the first argument is the name of a -% list (which must have already been defined as a \TeX\ command), and -% the second argument is a comma delimited list of items to add to the -% list. For example: -%\begin{verbatim} -% \EFaddtolist{\sanslist}{pag,phv,psy,pzd} -%\end{verbatim} -% adds four items to the list called \comname{sanslist}. The list ends -% up containing the given items with a special delimiter to make it -% easier to examine the list using \TeX\ code. A check is made to ensure -% that each item is unique: if you tried to put (say) \lfntname{ptm} -% (Adobe Times) onto the list twice, you'd only end up with one instance -% of \lfntname{ptm} in the list. No warnings are made when this happens. -% -% \subsubsection[\comname{EFiftexteuroexists}] -% {\comname{EFiftexteuroexists}\comarg{if true}\comarg{if false}} -% \label{sec:howitworks:EFiftexteuroexists} -% -% This command takes two arguments. It's used by \comname{maketexteuro} -% and \comname{cmeuro} like this: -%\begin{verbatim} -% \EFiftexteuroexists{\texteuro}{\makefakeeuro}} -%\end{verbatim} -% What happens is that three tests are made: if the current fount family -% is not listed in the \comname{faketexteurolist}, the -% \comname{texteuro} command exists, and a TS1 encoded \filename{fd} file -% exists for the current fount family, then the first argument is -% executed (\comname{texteuro} in this example). If any of these tests -% fails, then the second argument (\comname{makefakeeuro} in this -% example) is executed. -% -% The idea is that if there's a good chance that the \comname{texteuro} -% command will print something useful, then the first argument is -% executed; the second argument is executed otherwise. -% -% The \comname{texteuro} command is defined by the standard -% \LaTeX\ \packname{textcomp} package which \packname{eurofont} tries to -% load by default. The TS1 encoded \filename{fd} file searched for is -% \filename{ts1<fam>.fd}, where |<fam>| is the name of the current fount -% family. -% \subsubsection[\comname{EF@pmb}]{\comname{EF@pmb}\comarg{text}} -% \label{sec:howitworks:EFpmb} -% This command, not meant to be used in documents, is one of the two -% commands the \packname{eurofont} package uses to print faked bold -% characters. What it does is print six copies of its argument, each -% copy offset from the others by a small amount in a hexagonal -% arrangement. The other command to do this job, \comname{EF@pmsb}, is -% identical except that it uses a slightly smaller vertical offset to -% produce better results with the Marvosym euro symbols. -% -% This fakery is no substitute for a real bold symbol, but it's much -% better than the `poor man's bold' used in the TeXbook and the standard -% \LaTeX\ \packname{bm} package. The \packname{eurofont} package's -% \comname{EF@pmb} command produces tolerable results over the full -% range I've tested it: sizes from 5\,pt to 90\,pt; whereas the -% alternative three copy poor man's bold doesn't work at all well at -% large sizes. Thanks are due to Donald Arseneau for suggesting a six -% copy method. -% -% If you're interested, the actual code can be found in -% section~\vref{sec:code:EFpmb}. -% -% \StopEventually{} -% -%\iffalse -% -% 1999/01/30 v1.1.3 Made \EFeuro (and hence \euro) robust. Added note -% about dvips v5.83 being able to partially download Adobe's -% eurofonts correctly. Changed backslash printing in \comname. -% 1999/01/18 v1.1.2 Corrected a trivial literal error. Unreleased. -% 1998/11/14 v1.1.1 Corrected \ttrb command. -% 1998/11/10 v1.1 Congratulations to "Walter Schmidt" <wschmi@ibm.net> -% for reporting the first bug *and* telling me how to fix it: say -% Marvosym not marvosym in dvips map file entries. Done this, -% and made some very minor documentation mods. -% 1998/11/03 v1.0 <gulp> This is it... Minor doc changes, commented -% out some typeouts, and off we go (maybe). -% 1998/11/03 v0.32beta more documentation changes. Sorted out some of -% the readmes. -% 1998/10/31 v0.31beta Spooky, eh? Changed the \fake...euro commands -% to have two option arguments (thanks to Heiko Oberdiek -% <oberdiek@ruf.uni-freiburg.de> for the method). Documentation -% mods to match the code mods. Clobbered some extra spaces that -% had crept in somehow -% 1998/10/30 v0.30beta Some documentation changes again - dealing with -% slantfudge. The washing machine has changed colour. -% 1998/10/29 v0.29beta I've got a (silver) washing machine, and I'm -% still feeling mean. Changed \EFruleeuro to include -% slantfudge. -% 1998/10/28 v0.28beta More documentation changes. Fixed -% \makeusereuro bug. Added \EF@pmsb command for Marvosym euro -% symbols. Added \f@family etc to \EFeuro debugrep. -% 1998/10/22 v0.27beta More documentation changes. Getting there... -% Modified \showfontfamily message. Added \comarg and \comoptarg; -% modified \comname. -% 1998/10/21 v0.26beta More documentation changes; added note to -% dvidrive.txt about dvips fix. Does anybody want to buy a -% Starfighter? -% 1998/10/19 v0.25beta Added a documentation note about LaTeX -% versions - why did it take me so long to spot the need for -% this? -% 1998/10/17 v0.24beta Added \EF@fakeeurobase to replace literal `C' -% in fake euro code. \EFeuro now \providecommanded. Brought -% config file replacement in eurofont.sty into line with current -% eurofont.cfg; did something similar with driver section. -% Dealt with overfull \hboxes one way or another, and documented -% the overfullness and cheating in the code section. -% 1998/10/16 v0.23beta More documentation mods; fiddled with pmb -% code; fiddled with heavyruleeuros; fiddled with normruleeuro -% slant -% 1998/10/15 v0.22beta Did a spelling check :-) More documentation -% changes. -% 1998/10/14 v0.21beta More documentation changes. -% 1998/10/13 v0.20beta More documentation. The end is in sight. -% 1998/10/12 v0.19beta More documentation. Is there never going to be -% an end to all this? Added a test for china2e.sty to the -% \chinaeeuro command. -% 1998/10/06 v0.18beta More documentation. Tidied up some redundant -% comments and code. Improved bold faking. Swapped some \defs -% for \providecommands. Swapped debug reports around in -% \SelectOnWeight -% 1998/10/04 v0.17beta Yet more bloody documentation. Added -% fixtieaccent and nofixtieaccent options. -% 1998/10/03 v0.16beta More documentation. Modified \EFruleeuro and -% \EF@crosstrokes: they both now take C depth into account. -% 1998/10/01 v0.15beta Yet more documentation; \EF@crosstrokes now -% staggers the rules if the fount slants. My head hurts. Why is -% arithmetic in TeX such a pain, Dr Knuth? -% 1998/09/30 v0.14beta More documentation; added psy and pzd to -% seriflist -% 1998/09/29 v0.13beta More documentation; replaced cmr/ss/tteuro -% lists with single cmeuro list. -% 1998/09/28 v0.12beta changed \notexteuro to \faketexteuro; more -% documentation; got rid of \let\ESeuro at end; made textcomp -% loading optional; re-named \rightappenditem->\EF@rightappenditem. -% 1998/09/24 v0.11beta corrected \makesansesuro typo; added -% optargs to \fake...euro commands; modified ruleeuro commands. -% My brain hurts. -% 1998/09/24 v0.10beta Added \typeouts announcing beta status -% 1998/09/23 v0.9beta Changed values for ultrabold fakemedium and -% fakeheavy, and added \nobreaks to \euros commands -% 1998/09/22 v0.8beta Played about with faking code some more: added -% heavy stuff, and stuff for variant rules in fake euros -% controlled by options. Removed the odd bug. Added debugreport -% option and code. Changed behaviour of eurosym option: almost -% all \makeeuro commands are now affected. -% 1998/09/17 v0.7beta Changed docs; made more \make... commands; -% 1998/09/12 v0.6beta Changed code docs; made \@ruleeuro->\EFruleeuro; -% added stuff for China2e euro; dropped \EUR and made \euros instead -% 1998/09/10 v0.5beta Added \notexteurolist and modified \texteuro -% stuff: new test. Modifed \EFruleeuro to have different length -% cross-strokes. -% 1998/09/09 v0.4beta Added eurosym stuff; modified faking stuff -% (added four different weight lists, added support for -% \<fam>fakeeuro, and changed other bits too but my brain hurts -% now); added support for <fam>euro. Changed \cmreuro (etc) to -% \makecmreuro. Added some \AtBeginDocument stuff so \euro is -% always eurofont's \euro when eurosym is loaded; \EFeuro is -% defined here, and \let\euro\EFeuro \AtBeginDocument does the -% job. eurosym's \euro is (also) saved if needed: -% \let\ESeuro\euro. -% 1998/09/07 v0.3beta Added cfg file, eurosym options, and some more docs. -% 1998/09/07 v0.2beta First attempt to keep track of changes; added ui -% stuff to marvosym fd bits and farmed the whole lot out to an fd -% file. Improved \EF@pmb a bit. Added the start of the -% documentation and doc/docstrip-isation. Corrected an incredibly -% stupid fd file mistake. Changed some \defs to \providecommands in -% anticipation of the cfg file. -% 1998/08/something-1998/09/04 v0.1beta And so it grew... -% -%\fi -% -% \section{The code itself} -% -% To the interested reader: the code below grew rather than being -% designed and constructed according to a plan. This is reflected in the -% curious structure and eccentric comments; the comments were written -% for the chap who wrote the code, rather than anyone else. There's a -% fair bit of redundant code left (commented out) and quite a lot of -% debugging reports and development notes left in -- these are me -% talking to myself, so don't be worried if you see something -% inexplicable. -% -% One problem with the documented code is that the visual formatting I -% used means that quite a lot of lines are longer than 72 characters, so -% they won't fit within the normal width of the text. There are -% therefore rather a lot of overfull \comname{hboxes} below. I can't see -% any easy way round this, so I have cheated and set \comname{hfuzz} to -% a large value to suppress the warnings. -% -% Say `hello' to the nice \LaTeX\ program. Who am I, and what do I need? -% This package might work with any version of \LaTeXe, but I've -% only tested it with the June 1998 release. For best results, you -% need the ec founts andthe \packname{textcomp} package (part of recent -% \LaTeX s). -% -% -% \begin{macrocode} -\NeedsTeXFormat{LaTeX2e}[1998/06/01] -\ProvidesPackage{eurofont}[1999/01/30 v1.1.3 A package for using euro -symbols] -% \end{macrocode} -% -% Get all these defined before loading the config file which might -% want to use them. -% -% \begin{macrocode} -\def\userlist{} -\def\texteurolist{} -\def\chinaelist{} -\def\cmlist{} -\def\seriflist{} -\def\sanslist{} -\def\monolist{} -\def\fakemediumlist{} -\def\fakelightlist{} -\def\fakeheavylist{} -\def\faketexteurolist{} -% begin with list of what's light, medium, bold, and ultra bold -\def\EFlightserieslist{} -\def\EFmediumserieslist{} -\def\EFboldserieslist{} -\def\EFultraboldserieslist{} -% \end{macrocode} -%\begin{macro}{\ifEF@debugreport} -%\begin{macro}{\EF@debugrep} -% -%Flag and command to allow option switching of debugging reports -% -% \begin{macrocode} -\newif\ifEF@debugreport -\EF@debugreportfalse% Debugging reports off by default -\def\EF@debugrep#1{\ifEF@debugreport\typeout{eurofont: #1}\fi} -% \end{macrocode} -%\end{macro} -%\end{macro} -% -% \subsection{List handling code} -% Needed by the config file etc., which is why it's here. -%\begin{verbatim} -% \EFaddtolist{\listname}{comma delimited list of items to add} -% \EF@checkiflisted{item}{\listname} -% this sets \ifEF@listed to true or false -%\end{verbatim} -% -% Code from Stefan Ulrich |<ulrich@cis.uni-muenchen.de>|: -% -%\begin{macro}{\EF@checkiflisted} -% \begin{macrocode} -\newif\ifEF@listed -% -\def\EF@checkiflisted#1#2{% check if element #1 is in list #2 -\EF@listedfalse% -\edef\thiselem{#1}% changed to edef from def RJMM 1/9/98 -\let\@@elt\@elt% Save \@elt (in case this command is executed -% somewhere strange) -\def\@elt##1{\def\testelem{##1}% -\ifx\thiselem\testelem\EF@listedtrue\fi}% -#2\let\@elt\@@elt}% execute list and restore \@elt -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\EFaddtolist} -% \begin{macrocode} -\newcommand{\EFaddtolist}[2]{% #1 = list name; -% #2 = comma-delimited list of items to add -% \typeout{elements to add: #2}% debugging code; retain -% \expandafter%%% this seems redundant -\EF@addtolist#2,:#1\end} -% \end{macrocode} -%\end{macro} -% -% -%\begin{macro}{\EF@addtolist} -% \begin{macrocode} -\def\EF@addtolist#1,#2:#3\end{% #3 is the list now -\def\@tempcmda{#2}% -\ifx\@tempcmda\@empty% - \EF@debugrep{Last elem: #1}\relax% if #2 is empty, do this. - \EF@addMember{#1}{#3}% if #2 is empty, do this - \else - \EF@debugrep{elem: #1}\relax% if #2 is not empty, do this - \EF@addMember{#1}{#3}% if #2 is not empty, do this -% \expandafter%%% this seems redundant - \EF@addtolist#2:#3\end\fi}% if #2 is not empty, do this -% \end{macrocode} -%\end{macro} -% -% -%\begin{macro}{\EF@addMember} -% \begin{macrocode} -\newcommand{\EF@addMember}[2]{% - %%% add #1 only if it isn't yet in the list - %%% it surely would be more efficient without the check... - {\EF@checkiflisted{#1}{#2}\relax% to suppress space - \ifEF@listed - \EF@debugrep{#1 already in the list}\relax% - \else - \EF@debugrep{adding #1 to \string #2}\relax% - \EF@rightappenditem{#1}{#2}\fi}} -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\EF@rightappenditem} -% \begin{macrocode} -\newtoks\EF@tokb% token list register for temp use -\newcommand{\EF@rightappenditem}[2]% -{\@temptokena={\@elt{#1}}\EF@tokb=\expandafter{#2}% -\xdef#2{\the\EF@tokb\the\@temptokena}}% change the list globally -% \end{macrocode} -%\end{macro} -% -% End Stefan's bit -% -% \subsection{Options} -% -% Some options: select between Adobe's Eurofonts (typographically -% better) or the Marvosym fount for |\serifeuro|, |\sanseuro|, and |\monoeuro|. -% -% \begin{macrocode} -\newif\ifEF@marvosym\EF@marvosymfalse% Adobe Eurofonts by default -\newif\ifEF@eurosym\EF@eurosymfalse% Don't use eurosym by default -\newif\ifEF@textcomp\EF@textcomptrue% Load the textcomp package if -% possible (by default) -\newif\ifEF@fixtieaccent\EF@fixtieaccentfalse% Don't re-define tie -% accent by default -% -\DeclareOption{marvosym} {\EF@marvosymtrue} -\DeclareOption{adobeeurofonts}{\EF@marvosymfalse} -% -\DeclareOption{eurosym} {\EF@eurosymtrue} -\DeclareOption{noeurosym}{\EF@eurosymfalse} -% -\DeclareOption{debugreport}{\EF@debugreporttrue} -\DeclareOption{nodebugreport}{\EF@debugreportfalse} -% -\DeclareOption{notextcomp}{\EF@textcompfalse} -\DeclareOption{textcomp}{\EF@textcomptrue} -% -\DeclareOption{fixtieaccent}{\EF@fixtieaccenttrue} -\DeclareOption{nofixtieaccent}{\EF@fixtieaccentfalse} -% \end{macrocode} -% -%\begin{macro}{\fakelighteuro} -%\begin{macro}{\fakemediumeuro} -%\begin{macro}{\fakeheavyeuro} -% -% These commands were defined in the options: they're used by -% \comname{makefake\-mediumeuro}, \comname{makefakelighteuro}, and -% \comname{makefakeheavyeuro} commands later on. -% -% They all take two optional arguments: -%\begin{verbatim} -% \fake...euro[lift][slant correction factor%] -%\end{verbatim} -% The first argument is a normal dimension; the second is a -% percentage. Default values are 0\,pt and 100 respectively. The -% lift is the amount by which the cross-strokes are raised above the -% nominal vertical centre line of the C; the slant correction factor is -% the factor by which the nominal slant of an italic or oblique C is -% multiplied by before working out where to put the cross-strokes. -% Some founts have metrics that disagree with reality quite wildly in -% terms of the specified italic angle. If the cross-strokes are too -% far to the right in the case of slanted versions of a fake euro, this -% second optional argument should be set to something less than 100 (50 -% or 25 are good values to try to begin with); if the cross-strokes are -% too far to the left, this second optional argument should be set to -% something more than 100 to begin with (200 is a good value to try to -% begin with). -%{\hfuzz=10.0376pt -% \begin{macrocode} -\newcommand*{\fakelighteuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakelighteuro} -\newcommand*{\fakemediumeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakemediumeuro} -\newcommand*{\fakeheavyeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakeheavyeuro} -% \end{macrocode} -%} -%\end{macro} -%\end{macro} -%\end{macro} -% -% -%\begin{macro}{\@fakelighteuro} -%\begin{macro}{\@fakemediumeuro} -%\begin{macro}{\@fakeheavyeuro} -% These commands are the ones that change depending on which sort -% of slant you want on the rules; it's done like this so you can -% effectively have two optional arguments for the \comname{fake...euro} -% commands, which is awkward to arrange using \comname{newcommand}. -% These commands are meant to be called only from the three -% \comname{fake...euro} commands above. -% \begin{macrocode} -\DeclareOption{noslantfakeeuro} {% - \def\EF@fakeslant{0}% in case anyone's interested - \newcommand*{\@fakemediumeuro}[1][100] - {\mediumruleeuronoslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakelighteuro}[1][100] - {\lightruleeuronoslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakeheavyeuro}[1][100] - {\heavyruleeuronoslant{\EF@tmprlift}{#1}}} -\DeclareOption{normalslantfakeeuro} {% - \def\EF@fakeslant{1}% in case anyone's interested - \newcommand*{\@fakemediumeuro}[1][100] - {\mediumruleeuronorm{\EF@tmprlift}{#1}} - \newcommand*{\@fakelighteuro}[1][100] - {\lightruleeuronorm{\EF@tmprlift}{#1}} - \newcommand*{\@fakeheavyeuro}[1][100] - {\heavyruleeuronorm{\EF@tmprlift}{#1}}} -\DeclareOption{bigslantfakeeuro} {% - \def\EF@fakeslant{2}% in case anyone's interested - \newcommand*{\@fakemediumeuro}[1][100] - {\mediumruleeurobigslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakelighteuro}[1][100] - {\lightruleeurobigslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakeheavyeuro}[1][100] - {\heavyruleeurobigslant{\EF@tmprlift}{#1}}} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -% The |\euros| command was more-or-less stolen from eurosym.sty: -% The Euro Symbol Package for \LaTeX\ by -% Henrik Theiling |<theiling@coli.uni-sb.de>|, -%\begin{verbatim} -% http://www.coli.uni-sb.de/~theiling -% \ProvidesPackage{eurosymbol} -% [1998/08/06 v1.1 European currency symbol ``Euro''] -%\end{verbatim} -% {\hfuzz=19.48749pt -% \begin{macrocode} -\DeclareOption{left}{\PassOptionsToPackage{left}{eurosym}% -\DeclareRobustCommand{\euros}[1]{\euro\nobreak\,#1}} -\DeclareOption{right}{\PassOptionsToPackage{right}{eurosym}% -\DeclareRobustCommand{\euros}[1]{#1\nobreak\,\euro}} -\DeclareOption{official}{\PassOptionsToPackage{official}{eurosym}} -\DeclareOption{gen}{\PassOptionsToPackage{gen}{eurosym}} -\DeclareOption{gennarrow}{\PassOptionsToPackage{gennarrow}{eurosym}} -\DeclareOption{genwide}{\PassOptionsToPackage{genwide}{eurosym}} -% -\ExecuteOptions{adobeeurofonts}% Use Adobe's Eurofonts by default -\ExecuteOptions{noeurosym}% Don't use eurosym by default -\ExecuteOptions{left}% Euro symbol on left by default -\ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant by default -\ExecuteOptions{nodebugreport}% No debugging reports by default -\ExecuteOptions{textcomp}% Load the textcomp package by default -\ExecuteOptions{nofixtieaccent}% Don't re-define the tie accent by -% default -% \end{macrocode} -%} -% -% \begin{macrocode} -\InputIfFileExists{eurofont.cfg}{}% -{\PackageWarningNoLine{eurofont}% -{I can't find the eurofont.cfg configuration file.\MessageBreak -Perhaps something is wrong with this installation?\MessageBreak -The \protect\euro\space command will work with default settings}% -\EFaddtolist{\userlist}{} -\EFaddtolist{\texteurolist}{} -\EFaddtolist{\chinaelist}{} -\EFaddtolist{\cmlist}{cmr,cmss,cmtt} -\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put} -\EFaddtolist{\sanslist}{pag,phv,psy,pzd} -\EFaddtolist{\monolist}{pcr} -\EFaddtolist{\fakemediumlist}{pzc} -\EFaddtolist{\fakelightlist}{} -\EFaddtolist{\fakeheavylist}{} -% -\EFaddtolist{\faketexteurolist}{} -% \end{macrocode} -% The following lists are used to decide which thickness line should be used -% for producing faked euro symbols. demibold and semibold are in the -% medium list because I reckon it's better to have a line that's a -% touch too light than too heavy. -% {\hfuzz=10.0376pt -% \begin{macrocode} -\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx} -\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx} -\EFaddtolist{\EFboldserieslist}{b,bx,bc} -\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}% -% -% And two non-standard series: -% -\EFaddtolist{\EFultraboldserieslist}{xb,ebd} -} -% \end{macrocode} -%} -% -% Note: the stuff above should include more-or-less everything in the -% default config file. -% -% -% \begin{macrocode} -\ProcessOptions -% \end{macrocode} -% -% If requested (as it is by default), load textcomp.sty if it exists; -% this conditional code and subsequent checking for -% \filename{textcomp.sty} should allow eurofont.sty to work with old or -% OT1-only \LaTeX s. -% -%{\hfuzz=0.5877pt -% \begin{macrocode} -\ifEF@textcomp\IfFileExists{textcomp.sty}{\RequirePackage{textcomp}}{}\fi -% \end{macrocode} -%} -% -% If the textcomp package is going to be loaded, it'll be loaded by -% now, so now is the time to re-define the tie accent (if this has been -% asked for): -% \begin{macrocode} -\ifEF@fixtieaccent \DeclareTextAccentDefault{\t}{OML}\fi -% \end{macrocode} -% -% \begin{macrocode} -\ifEF@eurosym% -% \end{macrocode} -% even if eurosym can't be loaded, ensure that some sort of euro is -% printed: -% \begin{macrocode} -\def\euro{\makefakeeuro} -% \end{macrocode} -% Load eurosym if asked and if possible -% \begin{macrocode} -\IfFileExists{eurosym.sty}{\RequirePackage{eurosym}}{% -\PackageError{eurofont}{I can't find the eurosym package}% -{You've used the eurosym option; this requires the eurosym package -which doesn't appear to be installed}}% -% \end{macrocode} -% Save eurosym's |\euro| as |\ESeuro|; if eurosym couldn't be -% loaded, |\euro| is still defined as |\makefakeeuro| (see above), so a -% sort of |\euro| symbol will be printed -% \begin{macrocode} -\let\ESeuro\euro -\fi -% \end{macrocode} -% -% \subsection{A spare command or more?} -% -% \begin{macro}{\showfontfamily} -% \begin{macrocode} -\newcommand{\showfontfamily}{ -\typeout{**********************************} -\typeout{* \protect\showfontfamily: - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space*} -\typeout{*\space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space*} -\typeout{* The current font family is: \f@family\space *} -\typeout{*\space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space*} -\typeout{***********************************} -} -% \end{macrocode} -% \end{macro} -% -% -% \subsection{Code to fudge a euro if needed} -% -% The author commands to generate faked euro symbols now select one of four -% weights of cross-stroke to match light, medium, bold, and ultrabold. -% This should do. -% -%\begin{macro}{\EF@crossstrokes} -% -% Arguments as noted; this is the command that draws the horizontal -% strokes for a fake euro symbol. -% \hfuzz=14.76254pt -% \begin{macrocode} -\def\EF@crossstrokes#1#2#3#4#5#6#7#8#9{% -% #1 = width of C -% #2 = height of C -% #3 = depth of C -% #4 = back shift as percentage of #1 -% #5 = strokelen as percentage of #1 -% #6 = strokelen of bottom rule as percentage of #1 -% #7 = thickness of cross-strokes -% #8 = centre line spacing of cross-strokes -% #9 = extra rule lift -% Need to lift cross strokes by 1/2 (height C - height cross-strokes) -% -% N.B. slanted founts are an interesting thingy. -% The metrics often lie about the slant, so \EF@slantcorr is a -% percentage to multiply the slant/point figure from the tfm file by. -% Start out by ensuring that it exists: -\@ifundefined{EF@slantcorr}{\def\EF@slantcorr{100}}{}% -% \fontdimen1 is slant per point (in points). -\@tempdima=#8% -% \typeout{rule spacing = \the\@tempdima}% -\@tempdima=\fontdimen1\font% -% \typeout{slant per point = \the\@tempdima}% -% now apply fudge factor: -\@tempdima=0.1\@tempdima% -\@tempdima=\EF@slantcorr\@tempdima% -\@tempdima=0.1\@tempdima% -% (the eccentric multiplication is to reduce rounding error and -% reduce the risk of the dimen getting too big) -\edef\@tempcmda{\strip@pt\@tempdima}% -% \typeout{fudged slant per point/points = \@tempcmda}% -% \@tempdima=#1% -\@tempdima=#2% Changed from width #1 to height #2 -\@tempdima=\@tempcmda\@tempdima% -% \typeout{Width of C = #1}% -% \typeout{Height of C = #2}% -% \typeout{slant in points (for C) = \the\@tempdima}% -\@tempdima=0.5\@tempdima% -% \typeout{half slant in points (for C) = \the\@tempdima}% -% % now apply fudge factor: -% \@tempdima=0.1\@tempdima% -% \@tempdima=\EF@slantcorr\@tempdima% -% \@tempdima=0.1\@tempdima% -% % (the eccentric multiplication is to reduce rounding error and -% % reduce the risk of the dimen getting too big) -\edef\EF@slantC{\the\@tempdima}% -% \typeout{final half slant in points (for C) = \EF@slantC}% -% -% \EF@slantC is now 1/2 the slant of a C; -% need this for shifting back and forth -% -% Now calculate horizontal offset between rules -% \@tempcmda is still the fudged slant per point/points, so... -\@tempdimb=#8% centre line spacing of rules -\@tempdimb=\@tempcmda\@tempdimb% -\@tempdimb=0.5\@tempdimb% -\edef\EF@rulehoffset{\the\@tempdimb}% -% -% below is the old, mad, and incorrect (?) calc -% -% \begin{madness} -% -% \@tempdima=#2 -% \@tempdima=100\@tempdima -% \advance\@tempdima by0.5pt\@settopoint\@tempdima -% \edef\@tempcmda{\strip@pt\@tempdima}% -% \@tempdima=100pt% -% \divide\@tempdima by\@tempcmda% -% \edef\@tempcmda{\strip@pt\@tempdima}% -% \@tempdima=#8% -% \@tempdima=\@tempcmda\@tempdima% -% \@tempdimb=\EF@slantC% -% \@tempdimb=2\@tempdimb% since \EF@slantC is actually 1/2 slantC -% \edef\@tempcmda{\strip@pt\@tempdimb}% -% \@tempdima=\@tempcmda\@tempdima% -% \@tempdima=0.5\@tempdima% -% % -% \edef\EF@rulehoffset{\the\@tempdima}% -% -% \end{madness} -% -% \typeout{\protect\EF@rulehoffset\space = \EF@rulehoffset}% -% -% \EF@ruleoffset is now 1/2 the horizontal offset between rules; -% need this for shifting back and forth even more. -% -\@tempdima=#1% \ -\@tempdima=0.01\@tempdima% \ -\@tempdima=#4\@tempdima% } move back to add cross-strokes -\kern-\@tempdima% / -\kern\EF@slantC% / Slant correction forward for italic -% lift = (height C - depth C - rule gap - rule thickness)/2 + offset -% Note that `rule gap' is the distance between the centre lines of -% the rules, not the gap between them -\@tempdima=#2% \ -\advance\@tempdima by-#3% \ -\advance\@tempdima by-#8% \ calc lift of cross-strokes -\advance\@tempdima by-#7% / -\@tempdima=0.5\@tempdima% / -\advance\@tempdima by#9% / -% 0.17ex was 1/2 height c/s; height 0.07ex; spacing 0.2ex -\@tempdimc=#8% \ calc cross-stroke spacing -\advance\@tempdimc by-#7% / -\raisebox{\@tempdima}{% -\vbox{% \ -\@tempdimb=#1% \ \ -\@tempdimb=0.01\@tempdimb% } calc width of cross-stroke -\@tempdimb=#5\@tempdimb% / \ -\hbox{\kern\EF@rulehoffset% \ top rule -\vbox{\hrule width\@tempdimb height#7}}% \ -\nointerlineskip% } draw cross-strokes -\vskip\@tempdimc% / (using \@tempdima/b/c from above) -\@tempdimb=#1% \ / -\@tempdimb=0.01\@tempdimb% } calc width of cross-stroke -\@tempdimb=#6\@tempdimb% / / -\hbox{\kern-\EF@rulehoffset% / -\vbox{\hrule width\@tempdimb height#7}}}}% bottom rule -\@tempcnta=#4% \ -\advance\@tempcnta by-#5% (aha!) \ -\@tempdima=#1% \ -\@tempdima=0.01\@tempdima% \ move forward to end of C -\@tempdima=\@tempcnta\@tempdima% / -\kern\@tempdima% / -% shift by slant amount / -\kern-\EF@slantC% / slant correction -} -% -% \end{macrocode} -%\end{macro} -%\begin{macro}{\EF@fakeeurobase} -% This command contains the letter that's used as the base to fake a -% euro symbol -- it's used by the \comname{EFruleeuro} command. -% \begin{macrocode} -\providecommand\EF@fakeeurobase{C} -% \end{macrocode} -% \end{macro} -% -%\begin{macro}{\EFruleeuro} -% The internal command to generate faked euro symbols; meant to be used in -% config files and things if the user wants to create new sorts of fake -% euro symbols. -% \begin{macrocode} -\def\EFruleeuro#1#2#3#4#5#6#7{{% Confine defs to \EFruleeuro -% #1 = percentage of width of C that back shift of -% rules is; 110 usually -% #2 = percentage of width of C that width of -% top rules is -% #3 = percentage of width of C that width of -% bottom rule is -% #4 = rule thickness (dimen) -% #5 = rule spacing (dimen) -% #6 = extra rule lift (dimen) -% #7 = slant fudge factor (percentage); this is used to -% scale the slant per point dimension from the tfm -% file; it's often wrong in terms of the C glyph -\settowidth{\@tempdima}{\EF@fakeeurobase}% -\settoheight{\@tempdimb}{\EF@fakeeurobase}% -\settodepth{\@tempdimc}{\EF@fakeeurobase}% -\edef\EF@Cwidth{\the\@tempdima}% -\edef\EF@Cheight{\the\@tempdimb}% -\edef\EF@Cdepth{\the\@tempdimc}% -\advance\@tempdimb by\@tempdimc% -% \edef\totalCheight{\the\@tempdimb}%\totalCheight is height+depth of C -% \typeout{\protect\EF@Cwidth\space = \EF@Cwidth}% -% \typeout{\protect\EF@Cheight\space = \EF@Cheight}% -% \typeout{\protect\EF@Cdepth\space = \EF@Cdepth}% -% First job: deal with slant fudge -\def\EF@slantcorr{#7}% -\ifx\EF@slantcorr\@empty\def\EF@slantcorr{100}\fi% -% Ensure that \EF@slantcorr is 100 (%) if not specified. This -% parameter is used by \EF@crossstrokes -\def\EF@backshift{#1}% percentage of \EF@Cwidth that back shift is -\@tempdimb=0.01\@tempdima% swapped these two lines; -\@tempdimb=\EF@backshift\@tempdimb% dimen can get too big otherwise -% \@tempdimb now = length of shift back to add cross-strokes -% Note that this ignores the italic corrections. Is this right? -% (ignoring italic correction seems to be right; but... The -% introduction of the horizontal offset to the rules might not be -% right to ignore; it seems suitable in tests, but? Since the amount -% should always be small, I'll ignore it for now - dealing with it is -% awkward and the offset *should* help things fit together better.) -% \@tempdima now = width of C -% typeset the faked euro -% -% Assumption: that the cross-strokes don't extend to the right of the -% C (allows the width calculations to be a bit simpler than they -% otherwise would be). -% -% \@tempdima = width of C; \@tempdimb = \EF@backshift x width of C -% \typeout{\the\@tempdima\space = width of C}% -% \typeout{\the\@tempdimb\space = \protect\EF@backshift x width of C}% -% Following line: make box = largest of (\@tempdima,\@tempdimb) -\ifdim\@tempdimb>\@tempdima\@tempdima=\@tempdimb\fi% -\makebox[\@tempdima][r]% -{\EF@fakeeurobase\EF@crossstrokes{\EF@Cwidth}{\EF@Cheight}{\EF@Cdepth}% - {\EF@backshift}{#2}{#3}{#4}{#5}{#6}}% -}} -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\SelectOnWeight} -% -%\begin{verbatim} -% if the current fount series: -% is in the light list, do #1; else -% if it's in the medium list, do #2; else -% if it's in the bold list, do #3; else -% if it's in the ultrabold list, do #4; else -% do #2 -%\end{verbatim} -% -% \begin{macrocode} -\def\SelectOnWeight#1#2#3#4{% -\EF@checkiflisted{\f@series}{\EFlightserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight light}#1% -\else -\EF@checkiflisted{\f@series}{\EFmediumserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight medium}#2% -\else -\EF@checkiflisted{\f@series}{\EFboldserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight bold}#3% -\else -\EF@checkiflisted{\f@series}{\EFultraboldserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight ultrabold}#4% -\else\EF@debugrep{SelectOnWeight default to medium}% -#2% -\fi\fi\fi\fi} -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\mediumruleeuronorm} -%\begin{macro}{\mediumruleeuronoslant} -%\begin{macro}{\mediumruleeurobigslant} -% This is the standard command for faking a euro symbol. It selects -% one of four weights of cross-stroke depending on the current fount -% series. -% -% The light and ultra bold weights are fairly arbitrary. \hfuzz=57.28705pt -% -% \begin{macrocode} -\providecommand*{\mediumruleeuronorm}[2]{\EF@debugrep{medium rule euro norm}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold - new numbers -} -\providecommand*{\mediumruleeuronoslant}[2]{\EF@debugrep{medium rule euro noslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\mediumruleeurobigslant}[2]{\EF@debugrep{medium rule euro bigslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold -} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\lightruleeuronorm} -%\begin{macro}{\lightruleeuronoslant} -%\begin{macro}{\lightruleeurobigslant}\hfuzz=47.83716pt -% A complementary command for faking a euro with lighter cross-strokes; -% suitable for founts like Computer Modern Roman. -% \begin{macrocode} -\providecommand*{\lightruleeuronorm}[2]{\EF@debugrep{light rule euro norm}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{72}{0.02ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\lightruleeuronoslant}[2]{\EF@debugrep{light rule euro noslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{80}{0.02ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\lightruleeurobigslant}[2]{\EF@debugrep{light rule euro bigslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{60}{0.02ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold -} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\heavyruleeuronorm} -%\begin{macro}{\heavyruleeuronoslant} -%\begin{macro}{\heavyruleeurobigslant} -% A complementary command for faking a euro with heavy cross-strokes; -% it seemed inevitable after the other two. I'm not sure that there's -% any particular sense to the bold and ultra bold values in this case. -% -% I'm still not \emph{completely} happy with this, but it's much better -% now.\hfuzz=47.83716pt -% \begin{macrocode} -\providecommand*{\heavyruleeuronorm}[2]{\EF@debugrep{heavy rule euro norm}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{72}{0.22ex}{0.30ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{72}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold -} -\providecommand*{\heavyruleeuronoslant}[2]{\EF@debugrep{heavy rule euro noslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{80}{0.22ex}{0.30ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{80}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold -} -\providecommand*{\heavyruleeurobigslant}[2]{\EF@debugrep{heavy rule euro bigslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{60}{0.22ex}{0.30ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{60}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold -} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -%\subsection{Code to use marvosym} -% -% Code to use marvosym fount; needs faked italic tfm (and \dvidriver -% able to fake an italic) -% -%\begin{macro}{\EF@mvs} -% \begin{macrocode} -\def\EF@mvs{\fontencoding{U}\fontfamily{zmvs}\fontseries{m}\selectfont} -% \end{macrocode} -%\end{macro} -% -% Note that the |\mbox| is now redundant; leave it in in case -% |\EF@pmb| changes again -% -%\begin{macro}{\marvosymeuro} -% \begin{macrocode} -\providecommand{\marvosymeuro}[1]{% -\EF@debugrep{marvosymeuro}% -\SelectOnWeight% -{\EF@mvs\char#1}% light -{\EF@mvs\char#1}% medium -{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% bold -{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% ultra bold -} -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\marvosymserifeuro} -%\begin{macro}{\marvosymsanseuro} -%\begin{macro}{\marvosymmonoeuro} -% \begin{macrocode} -\providecommand - {\marvosymserifeuro}{\EF@debugrep{marvosymserifeuro}\marvosymeuro{101}} -\providecommand - {\marvosymsanseuro}{\EF@debugrep{marvosymsanseuro}\marvosymeuro{99}} -\providecommand - {\marvosymmonoeuro}{\EF@debugrep{marvosymmonoeuro}\marvosymeuro{100}} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -% \subsection{Faking a bold character} -% \label{sec:code:EFpmb} -% -% Original comments: -% |\EF@pmb| fakes bold; modified from the \TeX book -% -% I don't pretend to understand it all, but this seems to do the job -% better, and ensures that the width taken by the box is the width taken -% by the printed glyphs. This is used by |\marvosymeuro| -% Original code: -%\begin{verbatim} -% \def\EF@pmb#1{\makebox{\setbox\@tempboxa=\hbox{#1}% -% \kern0em\copy\@tempboxa\kern-\wd\@tempboxa -% \kern.025em\raise.0216em\copy\@tempboxa\kern-\wd\@tempboxa -% \kern.025em\box\@tempboxa }} -%\end{verbatim} -% -% This code produces a better faked bold; the idea of using a hexagonal -% arrangement was suggested by Donald Arseneau. You can probably tell -% I wrote the |\EF@pmb| macro myself :-) I might move to an -% octagonal arrangement later on. -% -% Marvosym complicates matters; a vertical shift of |0.866 x 0.020em| -% makes the horizontal strokes collide when you fake a bold Marvosym -% euro symbol. The solution is to move away from a regular hexagon and -% use a smaller vertical shift. -% -% So now there's two commands: \comname{EF@pmb} for normal fake bold, -% and \comname{EF@pmsb} (semi bold) for the Marvosym euro symbols. -% It's only slightly less heavy than the usual version. -% -%\begin{macro}{\EF@pmbshift} -%\begin{macro}{\EF@pmb} -%\begin{macro}{\EF@pmsb} -% \begin{macrocode} -\newlength{\EF@pmbshift} -% -\newcommand{\EF@pmsb}[1]{% -\EF@debugrep{EF@pmsb}% -\EF@pmbshift=0.020em% as was -\hbox{% -\rlap{#1}% -\kern0.5\EF@pmbshift% -\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern1\EF@pmbshift% -\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern0.5\EF@pmbshift% -#1}} -% -\newcommand{\EF@pmb}[1]{% -\EF@debugrep{EF@pmb}% -\EF@pmbshift=0.020em% as was -\hbox{% -\rlap{#1}% -\kern0.5\EF@pmbshift% -\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern1\EF@pmbshift% -\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern0.5\EF@pmbshift% -#1}} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -% -% \subsection{The code to select and print euro symbols} -% -% -% But better yet: add a pair of options: `|adobeeurofont|' or -% `|marvosym|'. The |marvosym| option will set up -% |\monoeuro| (etc) to use marvosym glyphs; the |adobeeurofont| option -% (default) will set |\monoeuro| (etc) to use adobe glyphs. -% -% Do this, \emph{and} add documentation on fiddling with |\userlist| (etc) -% so you can use both -% -% |\texteuro| is a problem: this command is here to help. -%\begin{verbatim} -% if <fam> is in \faketexteurolist, #2, -% else -% if \texteuro is defined and TS1<fam>.fd exists #1, -% else #2 -% fi fi -%\end{verbatim} -%\begin{macro}{\EFiftexteuroexists} -% \begin{macrocode} -\def\EFiftexteuroexists#1#2{% -\EF@checkiflisted{\f@family}{\faketexteurolist}% -\ifEF@listed#2% -\else -\ifx\texteuro\@undefined#2% if \texteuro doesn't exist, #2 and finish -\else% -\IfFileExists{ts1\f@family.fd}% -{#1}% if ts1<fam>.fd exists, #1. Can't usefully test for glyph existing -{#2}% if ts1<fam>.fd doesn't exist, #2 and finish -\fi\fi} -% \end{macrocode} -%\end{macro} -%\begin{macro}{\zpeutteuro} -%\begin{macro}{\zpeureuro} -%\begin{macro}{\zpeusseuro} -% Define these for |\monoeuro| etc., to use. Note that the command -% names are such that if you happen to be in |zpeutt| and say |\euro|, -% you'll get |\zpeutteuro| executed straight away. I don't have to -% list these fount families in |\seriflist| etc. -% \begin{macrocode} -\providecommand{\zpeutteuro}{\EF@debugrep{zpeutteuro}% -{\fontencoding{U}\fontfamily{zpeutt}\selectfont e}} -\providecommand{\zpeureuro}{\EF@debugrep{zpeureuro}% -{\fontencoding{U}\fontfamily{zpeur}\selectfont e}} -\providecommand{\zpeusseuro}{\EF@debugrep{zpeusseuro}% -{\fontencoding{U}\fontfamily{zpeuss}\selectfont e}} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -% Use either marvosym or Adobe's Eurofonts for serif/sans/mono lists -% -% These might have already been defined in the cfg file; don't want -% to over-ride those definitions, so |\providecommand| them. -% -% It's not safe to assume that either Adobe's Eurofonts or the Marvosym -% fount are in fact installed, but I don't see any easy way of finding -% out the truth of the matter. I suspect it's best to leave it up to the -% user to get the configuration right. Careful with that documentation, -% Eugene. -% -%\begin{macro}{\monoeuro} -%\begin{macro}{\serifeuro} -%\begin{macro}{\sanseuro} -% \begin{macrocode} -\ifEF@marvosym -\providecommand{\monoeuro}{\EF@debugrep{monoeuro}{\marvosymmonoeuro}} -\providecommand{\serifeuro}{\EF@debugrep{serifeuro}{\marvosymserifeuro}} -\providecommand{\sanseuro}{\EF@debugrep{sanseuro}{\marvosymsanseuro}} -\else -\providecommand{\monoeuro}{\EF@debugrep{monoeuro}\zpeutteuro} -\providecommand{\serifeuro}{\EF@debugrep{serifeuro}\zpeureuro} -\providecommand{\sanseuro}{\EF@debugrep{sanseuro}\zpeusseuro} -\fi -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -% Slightly more involved code for \comname{makeusereuro}: make it issue a -% warning if it's not user defined. -% -%\begin{macro}{\makeusereuro} -% \begin{macrocode} -\providecommand{\makeusereuro} - {\EF@debugrep{makeusereuro}\makefakemediumeuro% -% -\PackageWarningNoLine{eurofont}{% -You have tried to use the \protect\makeusereuro\space command -to\MessageBreak print a euro symbol, but you have not defined -the\MessageBreak \protect\makeusereuro\space command. This has -probably happened in\MessageBreak the \protect\euro\space command. I -shall print a faked euro symbol\MessageBreak for now}} -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\chinaeeuro} -% I have some misgivings about faking a bold from this euro symbol; -% it's a beautiful glyph which doesn't really deserve this sort of -% abuse. -% -% Removed the anomalous parameter from definition of |\chinaeeuro|. -% What was I thinking of? -% -% And finally\ldots\ Test for the existence of china2e.sty, and assume -% that China2e's not been installed if the package file is missing. I'd -% rather test for the existence of the tfm file, but I don't know how: -% if you know, I'd appreciate an email explaining how. -% -% \begin{macrocode} -\DeclareFontFamily{OT1}{chin}{} -\DeclareFontShape{OT1}{chin}{m}{n}{<-> china10}{} -% -\providecommand{\chinaeeuro}{% -\IfFileExists{china2e.sty}% -{\EF@debugrep{chinaeeuro}% -\SelectOnWeight% -{{\usefont{OT1}{chin}{m}{n}\char255}}% light -{{\usefont{OT1}{chin}{m}{n}\char255}}% medium -{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% bold -{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% ultra bold -}% -{\EF@debugrep{chinaeeuro - we have a problem}% -\PackageWarning{eurofont}{% -The \protect\euro\space command -is trying to print a euro symbol\MessageBreak -from the China2e fount, but I can't find the file\MessageBreak -china2e.sty.\MessageBreak\MessageBreak -I'm assuming that you've not got the China2e font\MessageBreak -installed, so I'm printing a faked euro instead\MessageBreak}% -\makefakeeuro}} -% \end{macrocode} -%\end{macro} -% -%\begin{macro}{\cmrfakeeuro} -%\begin{macro}{\cmssfakeeuro} -%\begin{macro}{\cmttfakeeuro} -% \begin{macrocode} -\providecommand{\cmrfakeeuro}{% -\EF@debugrep{\protect\cmrfakeeuro}\fakelighteuro} -% -\providecommand{\cmssfakeeuro}{% -\EF@debugrep{\protect\cmssfakeeuro}\fakemediumeuro} -% -\providecommand{\cmttfakeeuro}{% -\EF@debugrep{\protect\cmttfakeeuro}\fakemediumeuro} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\makefakeeuro} -%\begin{macro}{\makefakeheavyeuro} -%\begin{macro}{\makefakemediumeuro} -%\begin{macro}{\makefakelighteuro} -% If \comname{<fam>fakeeuro} exists, do \comname{<fam>fakeeuro}; else -% \comname{fakelighteuro}, \comname{fake\-mediumeuro}, or -% \comname{fakeheavyeuro} depending). -% -% |\providecommand|s again so that these definitions can be -% over-ridden in the config file -% -% \begin{macrocode} -\providecommand{\makefakemediumeuro}{\EF@debugrep{makefakemediumeuro}% -\@ifundefined{\f@family fakeeuro}{\fakemediumeuro}% -{\csname\f@family fakeeuro\endcsname}} -% -\providecommand{\makefakelighteuro}{\EF@debugrep{makefakelighteuro}% -\@ifundefined{\f@family fakeeuro}{\fakelighteuro}% -{\csname\f@family fakeeuro\endcsname}} -% -\providecommand{\makefakeheavyeuro}{\EF@debugrep{makefakeheavyeuro}% -\@ifundefined{\f@family fakeeuro}{\fakeheavyeuro}% -{\csname\f@family fakeeuro\endcsname}} -% -\providecommand{\makefakeeuro}{\EF@debugrep{makefakeeuro}% -\@ifundefined{\f@family fakeeuro}{% -% if \<fam>fakeeuro doesn't exist, do this: -\EF@checkiflisted{\f@family}{\fakelightlist}\relax - \ifEF@listed \makefakelighteuro - \else - \EF@checkiflisted{\f@family}{\fakemediumlist}\relax - \ifEF@listed \makefakemediumeuro - \else - \EF@checkiflisted{\f@family}{\fakeheavylist}\relax - \ifEF@listed \makefakeheavyeuro - \else% If <fam>'s not listed, - \makefakemediumeuro% print medium faked euro - \fi \fi \fi -}% -% If \<fam>fakeeuro does exist, execute it: -{\csname\f@family fakeeuro\endcsname}} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -% -% This turned into a heavy bummer. Re-wrote the faking code to push -% the top rule to the right and the bottom rule to the left when the -% fount slants. -% -%\begin{macro}{\pzcfakeeuro} -% \begin{macrocode} -\providecommand{\pzcfakeeuro}{\EF@debugrep{pzcfakeeuro}% -% \@tempdima=1ex% you what? -% commented out until I find out what I thought I was doing -\fakemediumeuro[-0.1ex]} -% \end{macrocode} -%\end{macro} -% -% \subsection{Make euro commands} -% -% Can't just |\let| one equal to the other because of the debugging -% reports. -%\begin{macro}{\maketexteuro} -%\begin{macro}{\cmeuro} -% \begin{macrocode} -\providecommand{\maketexteuro}{\EF@debugrep{maketexteuro}% -\EFiftexteuroexists{\texteuro}{\makefakeeuro}} -% -\providecommand{\cmeuro}{\EF@debugrep{cmeuro}% -\EFiftexteuroexists{\texteuro}{\makefakeeuro}} -% \end{macrocode} -%\end{macro} -%\end{macro} -% -% If the eurosym option's been specified, switch to eurosym's version of -% the euro for: the Computer Modern families, serifeuro, sanseuro, and -% monoeuro, and the default euro. -% -% This is the only place where these euro commands are defined; use -% \comname{provide\-command} so they can be over-ridden by the config -% file. -% -% \begin{macro}{\makecmeuro} -% \begin{macro}{\makedefaulteuro} -% \begin{macro}{\makeserifeuro} -% \begin{macro}{\makesanseuro} -% \begin{macro}{\makemonoeuro}\hfuzz=33.66232pt -% \begin{macrocode} -\ifEF@eurosym -\EF@debugrep{Using eurosym's euro command} -\providecommand{\makecmeuro} {\EF@debugrep{makecmeuro; ESeuro}\ESeuro} -\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro; ESeuro}\ESeuro} -\providecommand{\makeserifeuro} {\EF@debugrep{makeserifeuro; ESeuro}\ESeuro} -\providecommand{\makesanseuro} {\EF@debugrep{makesanseuro; ESeuro}\ESeuro} -\providecommand{\makemonoeuro} {\EF@debugrep{makemonoeuro; ESeuro}\ESeuro} -\else -\EF@debugrep{Not using eurosym's euro command} -\providecommand{\makecmeuro} {\EF@debugrep{makecmeuro }\cmeuro} -\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro}\makefakeeuro} -\providecommand{\makeserifeuro} {\EF@debugrep{makeserifeuro }\serifeuro} -\providecommand{\makesanseuro} {\EF@debugrep{makesanseuro }\sanseuro} -\providecommand{\makemonoeuro} {\EF@debugrep{makemonoeuro }\monoeuro} -\fi -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \begin{macro}{\makechinaeeuro} -% This command needs a test to detect the existence of the china2e tfm -% file before trying to use the fount -% \begin{macrocode} -\providecommand{\makechinaeeuro} - {\EF@debugrep{makechinaeeuro}\chinaeeuro} -% \end{macrocode} -% \end{macro} -% -% Note: |\makecmeuro|+|\maketexteuro| could have identical definitions, -% since |\makefakeeuro| will call |\<fam>euro| if it exists before trying the -% generic fake euro code. (much later) Does anyone know what I mean by this? -% -% {\small\hfuzz=32.4455pt -%\begin{verbatim} -% If \f@family is in \userlist, \makeusereuro -% else -% if \<fam>euro exists, \<fam>euro -% else -% if \f@family is in \texteurolist, \maketexteuro -% else -% if \@family is in \chinaelist, \makechinaeeuro -% else -% if \f@family is in \cmlist, \makecmeuro -% else -% if \f@family is in \serifeurolist, \makeserifeuro -% else -% if \f@family is in \sanseurolist, \makesanseuro -% else -% if \f@family is in \monoeurolist, \makemonoeuro -% else -% if \f@family is in \makefakemediumeurolist, \makefakemediumeuro -% else -% if \f@family is in \makefakeheavyeurolist, \makefakeheavyeuro -% else -% if \f@family is in \makefakelighteurolist, \makefakelighteuro -% else \makedefaulteuro -% fi fi fi fi fi fi fi fi fi fi fi -%\end{verbatim} -%} -% |\makecmeuro|: -%\begin{verbatim} -% \texteuro if: -% not in \faketexteurolist and TS1<fam>.fd and \texteuro exist, -% \makefakeeuro otherwise -%\end{verbatim} -% -% |\maketexteuro|: -%\begin{verbatim} -% \texteuro if: -% not in \faketexteurolist and TS1<fam>.fd and \texteuro exist, -% \makefakeeuro otherwise -%\end{verbatim} -% -% This is it\ldots\ The |\relaxes| are in there just to suppress unwanted -% spaces and let me use the visual formatting in the command that I -% wanted to. -% -%\begin{macro}{\EFeuro}\hfuzz=66.73694pt -% \begin{macrocode} -\DeclareRobustCommand{\EFeuro}{\EF@debugrep{start EFeuro: - \f@encoding/\f@family/\f@series/\f@shape}% - \EF@checkiflisted{\f@family}{\userlist}\relax - \ifEF@listed\EF@debugrep{EFeuro makeuser euro}\makeusereuro - \else - \@ifundefined{\f@family euro}{\@tempswatrue}% test for \<fam>euro - {\EF@debugrep{EFeuro \f@family euro}\relax% do \<fam>euro - \@tempswafalse\csname\f@family euro\endcsname}\relax% do \<fam>euro - \if@tempswa% if \<fam>euro doesn't exist, do the next test - \EF@checkiflisted{\f@family}{\texteurolist}\relax - \ifEF@listed \EF@debugrep{EFeuro texteuro}\maketexteuro - \else - \EF@checkiflisted{\f@family}{\chinaelist}\relax - \ifEF@listed \EF@debugrep{EFeuro China2e euro}\makechinaeeuro - \else - \EF@checkiflisted{\f@family}{\cmlist}\relax - \ifEF@listed \EF@debugrep{EFeuro cm euro}\makecmeuro - \else - \EF@checkiflisted{\f@family}{\seriflist}\relax - \ifEF@listed \EF@debugrep{EFeuro serif euro}\makeserifeuro - \else - \EF@checkiflisted{\f@family}{\sanslist}\relax - \ifEF@listed \EF@debugrep{EFeuro sans euro}\makesanseuro - \else - \EF@checkiflisted{\f@family}{\monolist}\relax - \ifEF@listed \EF@debugrep{EFeuro mono euro}\makemonoeuro - \else - \EF@checkiflisted{\f@family}{\fakelightlist}\relax - \ifEF@listed \EF@debugrep{EFeuro fake light euro}\makefakelighteuro - \else - \EF@checkiflisted{\f@family}{\fakemediumlist}\relax - \ifEF@listed \EF@debugrep{EFeuro fake med euro}\makefakemediumeuro - \else - \EF@checkiflisted{\f@family}{\fakeheavylist}\relax - \ifEF@listed \EF@debugrep{EFeuro fake heavy euro}\makefakeheavyeuro - \else \EF@debugrep{EFeuro default euro}\makedefaulteuro - \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi} -% \end{macrocode} -%\end{macro} -% -% Now then\ldots \packname{eurofont's} euro-generating command is -% defined as \comname{EFeuro} to begin with. That's so that it can be -% defined without clashing with anything else (with luck). The following -% code is to try and ensure that the \comname{euro} command used in the -% document is what \packname{eurofont} wants it to be. If -% \packname{eurosym}'s been loaded, its \comname{euro} command is saved -% as \comname{ESeuro} just after its been loaded, and if any command -% called \comname{euro} exists at all, it's renamed \comname{oldeuro} -% at the \comname{begin\{document\}} command. Yes, that does mean that -% \comname{ESeuro} and \comname{oldeuro} can end up identical if -% you've loaded the \packname{eurosym} package. -% -% \begin{macrocode} -\AtBeginDocument{% -% \@ifpackageloaded{eurosym}{\let\ESeuro\euro}{}% save eurosym's \euro -% No: this is redundant to an extent. If the eurosym option has been -% specified, \ESeuro has already be \let to \euro. Best to leave it -% at that, I think: any already-defined \euro command will be saved -% as \EFoldeuro anyway. -\let\oldeuro\euro% save the previous \euro command (if one exists) -\let\euro\EFeuro}% make the \euro command be \EFeuro come what may -% \end{macrocode} -% -% \begin{macrocode} -\endinput -% \end{macrocode} -% \Finale -%\iffalse -%</package> -%% -%% End of file `eurofont.sty' -%% \fi
\ No newline at end of file diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurofont.ins b/Master/texmf-dist/doc/fonts/eurofont/eurofont.ins deleted file mode 100644 index 65c20f0b983..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/eurofont.ins +++ /dev/null @@ -1,451 +0,0 @@ -\iffalse -Copyright 1998 Rowland McDonnell -This file is part of the eurofont distribution. You can distribute it -freely provided that you include the rest of the eurofont distribution -with this file and make no more than a nominal charge to cover the -costs of distributing it. - -If you would like to change the contents of this file, please make a -copy of it under a different name and change that instead. Keep my -copyright notice attached, but make it clear that the new file is your -responsibility so you get the credit for the improvements and I don't -get blamed for the bugs. -\fi -\ProvidesFile{eurofont.ins} -% -% fd file for Marvosym: -\begin{filecontents}{uzmvs.fd} -% Filename: uzmvs.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Marvosym -% -% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY -% -% The slightly strange name is because Marvosym already has an -% official name and I'd like to avoid any conflicts. So make the -% Marvosym used by eurofont.sty a bizzare one (z prefix) because -% nothing else seems right to me. -% -% Please don't use this file for anything directly: it's meant to -% provide NFSS fount definitions so that the eurofont package can make -% a half-decent job of printing euro symbols using the Marvosym -% fount. Because of this, it's a bit eccentric to match eurofont's -% eccentric way of doing things. -% -% If you want to modify the code in this file, save the file under a -% different name and modify *that*. Please make sure you add a note -% indicating that you've changed things. -% -\ProvidesFile{uzmvs.fd} - [1998/10/10 Hacked by RJMM font definitions for U/zmvs.] -% -\DeclareFontFamily{U}{zmvs}{} -\DeclareFontShape{U}{zmvs}{m}{n} {<-> fmvr8x}{} -% -% Extra font defs needed -\DeclareFontShape{U}{zmvs}{m}{it}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{m}{sl}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{m}{sc}{<-> fmvr8x}{} -% -\DeclareFontShape{U}{zmvs}{l}{n} {<-> fmvr8x}{} -\DeclareFontShape{U}{zmvs}{l}{it}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{l}{sl}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{l}{sc}{<-> fmvr8x}{} -% -\DeclareFontShape{U}{zmvs}{l} {ui} {<->ssub * zmvs/m/n}{} -\DeclareFontShape{U}{zmvs}{m} {ui} {<->ssub * zmvs/m/n}{} -% -\endinput -\end{filecontents} - -% fd file for Adobe Euroserif: -\begin{filecontents}{uzpeur.fd} -% Filename: uzpeur.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Adobe Euroserif -% -%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY - -\ProvidesFile{uzpeur.fd} - [1998/10/10 Eurofont package font definitions for U/zpeur.] - -\DeclareFontFamily{U}{zpeur}{\hyphenchar\font\m@ne}% - -\DeclareFontShape{U}{zpeur}{m}{n} {<->zpeur} {} -\DeclareFontShape{U}{zpeur}{m}{it}{<->zpeuri}{} -\DeclareFontShape{U}{zpeur}{m}{sl}{<->ssub * zpeur/m/it}{} -\DeclareFontShape{U}{zpeur}{m}{sc}{<->ssub * zpeur/m/n}{} - -\DeclareFontShape{U}{zpeur}{b}{n} {<->zpeub} {} -\DeclareFontShape{U}{zpeur}{b}{it}{<->zpeubi}{} -\DeclareFontShape{U}{zpeur}{b}{sl}{<->ssub * zpeur/b/it} {} -\DeclareFontShape{U}{zpeur}{b}{sc}{<->ssub * zpeur/b/n}{} - -\DeclareFontShape{U}{zpeur}{l}{n} {<->ssub * zpeur/m/n} {} -\DeclareFontShape{U}{zpeur}{l}{it}{<->ssub * zpeur/m/it}{} -\DeclareFontShape{U}{zpeur}{l}{sl}{<->ssub * zpeur/m/it}{} -\DeclareFontShape{U}{zpeur}{l}{sc}{<->ssub * zpeur/m/n} {} - -\DeclareFontShape{U}{zpeur}{bx}{n} {<->ssub * zpeur/b/n} {} -\DeclareFontShape{U}{zpeur}{bx}{it}{<->ssub * zpeur/b/it}{} -\DeclareFontShape{U}{zpeur}{bx}{sl}{<->ssub * zpeur/b/it}{} -\DeclareFontShape{U}{zpeur}{bx}{sc}{<->ssub * zpeur/b/n} {} - -\DeclareFontShape{U}{zpeur}{l} {ui} {<->ssub * zpeur/m/n}{} -\DeclareFontShape{U}{zpeur}{m} {ui} {<->ssub * zpeur/m/n}{} -\DeclareFontShape{U}{zpeur}{b} {ui} {<->ssub * zpeur/b/n}{} -\DeclareFontShape{U}{zpeur}{bx}{ui} {<->ssub * zpeur/b/n}{} -% -\endinput -\end{filecontents} - -% fd file for Adobe Eurosans: -\begin{filecontents}{uzpeuss.fd} -% Filename: uzpeuss.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Adobe Eurosans -% -%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY - -\ProvidesFile{uzpeuss.fd} - [1998/10/10 Eurofont package font definitions for U/zpeuss.] - -\DeclareFontFamily{U}{zpeuss}{\hyphenchar\font\m@ne}% - -\DeclareFontShape{U}{zpeuss}{m}{n} {<->zpeurs} {} -\DeclareFontShape{U}{zpeuss}{m}{it}{<->zpeuris}{} -\DeclareFontShape{U}{zpeuss}{m}{sl}{<->ssub * zpeuss/m/it}{} -\DeclareFontShape{U}{zpeuss}{m}{sc}{<->ssub * zpeuss/m/n}{} - -\DeclareFontShape{U}{zpeuss}{b}{n} {<->zpeubs} {} -\DeclareFontShape{U}{zpeuss}{b}{it}{<->zpeubis}{} -\DeclareFontShape{U}{zpeuss}{b}{sl}{<->ssub * zpeuss/b/it} {} -\DeclareFontShape{U}{zpeuss}{b}{sc}{<->ssub * zpeuss/b/n}{} - -\DeclareFontShape{U}{zpeuss}{l}{n} {<->ssub * zpeuss/m/n}{} -\DeclareFontShape{U}{zpeuss}{l}{it}{<->ssub * zpeuss/m/it}{} -\DeclareFontShape{U}{zpeuss}{l}{sl}{<->ssub * zpeuss/m/it}{} -\DeclareFontShape{U}{zpeuss}{l}{sc}{<->ssub * zpeuss/m/n} {} - -\DeclareFontShape{U}{zpeuss}{bx}{n} {<->ssub * zpeuss/b/n} {} -\DeclareFontShape{U}{zpeuss}{bx}{it}{<->ssub * zpeuss/b/it}{} -\DeclareFontShape{U}{zpeuss}{bx}{sl}{<->ssub * zpeuss/b/it}{} -\DeclareFontShape{U}{zpeuss}{bx}{sc}{<->ssub * zpeuss/b/n} {} - -\DeclareFontShape{U}{zpeuss}{l} {ui} {<->ssub * zpeuss/m/n}{} -\DeclareFontShape{U}{zpeuss}{m} {ui} {<->ssub * zpeuss/m/n}{} -\DeclareFontShape{U}{zpeuss}{b} {ui} {<->ssub * zpeuss/m/b}{} -\DeclareFontShape{U}{zpeuss}{bx}{ui} {<->ssub * zpeuss/m/b}{} -% -\endinput -\end{filecontents} - -% fd file for Adobe Euromono: -\begin{filecontents}{uzpeutt.fd} -%Filename: uzpeutt.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Adobe Euromono -% -%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY - -\ProvidesFile{Uzpeutt.fd} - [1998/10/10 Eurofont package font definitions for U/zpeutt.] - -\DeclareFontFamily{U}{zpeutt}{\hyphenchar\font\m@ne}% - -\DeclareFontShape{U}{zpeutt}{m}{n} {<->zpeurt} {} -\DeclareFontShape{U}{zpeutt}{m}{it}{<->zpeurit}{} -\DeclareFontShape{U}{zpeutt}{m}{sl}{<->ssub * zpeutt/m/it}{} -\DeclareFontShape{U}{zpeutt}{m}{sc}{<->ssub * zpeutt/m/n}{} - -\DeclareFontShape{U}{zpeutt}{b}{n} {<->zpeubt} {} -\DeclareFontShape{U}{zpeutt}{b}{it}{<->zpeubit}{} -\DeclareFontShape{U}{zpeutt}{b}{sl}{<->ssub * zpeutt/b/it} {} -\DeclareFontShape{U}{zpeutt}{b}{sc}{<->ssub * zpeutt/b/n}{} - -\DeclareFontShape{U}{zpeutt}{l}{n} {<->ssub * zpeutt/m/n}{} -\DeclareFontShape{U}{zpeutt}{l}{it}{<->ssub * zpeutt/m/it}{} -\DeclareFontShape{U}{zpeutt}{l}{sl}{<->ssub * zpeutt/m/it}{} -\DeclareFontShape{U}{zpeutt}{l}{sc}{<->ssub * zpeutt/m/n} {} - -\DeclareFontShape{U}{zpeutt}{bx}{n} {<->ssub * zpeutt/b/n} {} -\DeclareFontShape{U}{zpeutt}{bx}{it}{<->ssub * zpeutt/b/it}{} -\DeclareFontShape{U}{zpeutt}{bx}{sl}{<->ssub * zpeutt/b/it}{} -\DeclareFontShape{U}{zpeutt}{bx}{sc}{<->ssub * zpeutt/b/n} {} - -\DeclareFontShape{U}{zpeutt}{l} {ui} {<->ssub * zpeutt/m/n}{} -\DeclareFontShape{U}{zpeutt}{m} {ui} {<->ssub * zpeutt/m/n}{} -\DeclareFontShape{U}{zpeutt}{b} {ui} {<->ssub * zpeutt/m/b}{} -\DeclareFontShape{U}{zpeutt}{bx}{ui} {<->ssub * zpeutt/m/b}{} -% -\endinput -\end{filecontents} - -% Config file -\begin{filecontents}{eurofont.cfg} -% Configuration file for the eurofont package -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Please do change this file as much as you like, but don't distribute -% modified versions. -% -% If you change this file, do make sure that you change the date, -% version number, and identification note below: -% -\ProvidesFile{eurofont.cfg}[1998/11/03 v1.0 Default config file for -the eurofont package] -% -% List contents Corresponding command -% -\EFaddtolist{\userlist}{}% \makeusereuro -\EFaddtolist{\texteurolist}{}% \maketexteuro -\EFaddtolist{\chinaelist}{}% \makechinaeeuro -\EFaddtolist{\cmlist}{cmr,cmss,cmtt}% \makecmeuro -\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro -\EFaddtolist{\sanslist}{pag,phv,psy,pzd}% \makesanseuro -\EFaddtolist{\monolist}{pcr}% \makemonoeuro -\EFaddtolist{\fakemediumlist}{pzc}% \makefakemediumeuro -\EFaddtolist{\fakelightlist}{}% \makefakelighteuro -\EFaddtolist{\fakeheavylist}{}% \makefakeheavyeuro -% -\EFaddtolist{\faketexteurolist}{} -% -% Put all the standard LaTeX weights (and likely extras) -% into one of the following lists: -% -\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx} -\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx} -\EFaddtolist{\EFboldserieslist}{b,bx,bc} -\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx} -% -% And two non-standard weights: -% -\EFaddtolist{\EFultraboldserieslist}{xb,ebd} -% -\endinput -\end{filecontents} -\begin{filecontents}{dvidrive.txt} -File dvidrive.txt -Copyright 1998 Rowland McDonnell -email rebecca@astrid.u-net.com - - -This file contains information on how to configure dvips and OzTeX to use -Adobe's Eurofonts and the Marvosym fount. I believe that pdfTeX can use -dvips entries. - -If there are any problems with the information below, or if you have -information on how to configure other dvi drivers, please let me know by -emailing: rebecca@astrid.u-net.com - - -DVI DRIVER CONFIGURATION LINES FOR ADOBE'S EUROFONTS -==================================================== - -Note that versions of dvips before v5.83 have trouble doing partial fount -downloading with Adobe's Eurofonts. Because of this, I have listed the -dvips psfont.map entries with `|<<|' and with `|<|': the `|<<|' -entries prevent dvips attempting to do partial fount downloading with -that particular fount. - -The `<<' syntax does not work with all versions of dvips; it does work -with dvips v5.78, but doesn't work with v5.70. If you're using a pre -`<<' dvips, you should use the entries with `<' and don't use partial -fount downloading with any document containing Adobe's Eurofonts; -passing the -j0 switch to dvips will prevent it from doing partial -fount downloading if this is normally turned on. - -I've asked the author of dvips when the `<<' syntax was first -introduced, and he can't remember. - -I am told that pdftex can do partial fount downloading using Adobe's -Eurofonts. - -Eurofont configuration lines for Windows/Unix/any others? -========================================================= - -(you need to re-name the *.PFB files *.pfb; thanks to Stefan Ulrich -<ulrich@cis.uni-muenchen.de> for this and the following entries) - - -psfonts.map entries for Windows/Unix/other -dvips v5.78 or similar - -zpeurs EuroSans-Regular <<_1______.pfb -zpeubs EuroSans-Bold <<_1B_____.pfb -zpeuris EuroSans-Italic <<_1I_____.pfb -zpeubis EuroSans-BoldItalic <<_1BI____.pfb -zpeurt EuroMono-Regular <<_2______.pfb -zpeubt EuroMono-Bold <<_2B_____.pfb -zpeurit EuroMono-Italic <<_2I_____.pfb -zpeubit EuroMono-BoldItalic <<_2BI____.pfb -zpeur EuroSerif-Regular <<_3______.pfb -zpeub EuroSerif-Bold <<_3B_____.pfb -zpeuri EuroSerif-Italic <<_3I_____.pfb -zpeubi EuroSerif-BoldItalic <<_3BI____.pfb - - -psfonts.map entries for Windows/Unix/other -dvips v5.70 or before, dvips v5.83 and above, and pdftex: - -(note that I don't use pdftex; this suggestion might not work) - -zpeurs EuroSans-Regular <_1______.pfb -zpeubs EuroSans-Bold <_1B_____.pfb -zpeuris EuroSans-Italic <_1I_____.pfb -zpeubis EuroSans-BoldItalic <_1BI____.pfb -zpeurt EuroMono-Regular <_2______.pfb -zpeubt EuroMono-Bold <_2B_____.pfb -zpeurit EuroMono-Italic <_2I_____.pfb -zpeubit EuroMono-BoldItalic <_2BI____.pfb -zpeur EuroSerif-Regular <_3______.pfb -zpeub EuroSerif-Bold <_3B_____.pfb -zpeuri EuroSerif-Italic <_3I_____.pfb -zpeubi EuroSerif-BoldItalic <_3BI____.pfb - - -Eurofont configuration lines for Macs -===================================== - - -Macintosh psfonts.map entries for dvips v5.78 or similar - -zpeur EuroSerif-Regular <<EuroSerReg -zpeuri EuroSerif-Italic <<EuroSerIta -zpeub EuroSerif-Bold <<EuroSerBol -zpeubi EuroSerif-BoldItalic <<EuroSerBolIta -zpeurs EuroSans-Regular <<EuroSanReg -zpeuris EuroSans-Italic <<EuroSanIta -zpeubs EuroSans-Bold <<EuroSanBol -zpeubis EuroSans-BoldItalic <<EuroSanBolIta -zpeurt EuroMono-Regular <<EuroMonReg -zpeurit EuroMono-Italic <<EuroMonIta -zpeubt EuroMono-Bold <<EuroMonBol -zpeubit EuroMono-BoldItalic <<EuroMonBolIta - - -Macintosh psfonts.map entries for -dvips v5.70 or before, dvips v5.83 and above, and pdftex: - -(note that I don't use pdftex; this suggestion might not work) - -zpeur EuroSerif-Regular <EuroSerReg -zpeuri EuroSerif-Italic <EuroSerIta -zpeub EuroSerif-Bold <EuroSerBol -zpeubi EuroSerif-BoldItalic <EuroSerBolIta -zpeurs EuroSans-Regular <EuroSanReg -zpeuris EuroSans-Italic <EuroSanIta -zpeubs EuroSans-Bold <EuroSanBol -zpeubis EuroSans-BoldItalic <EuroSanBolIta -zpeurt EuroMono-Regular <EuroMonReg -zpeurit EuroMono-Italic <EuroMonIta -zpeubt EuroMono-Bold <EuroMonBol -zpeubit EuroMono-BoldItalic <EuroMonBolIta - - -OzTeX config file entries - -zpeur EuroSerif-Regular "Euro Serif" nil -zpeuri EuroSerif-Italic "Euro Serif" nil i -zpeub EuroSerif-Bold "Euro Serif" nil b -zpeubi EuroSerif-BoldItalic "Euro Serif" nil bi -zpeurs EuroSans-Regular "Euro Sans" nil -zpeuris EuroSans-Italic "Euro Sans" nil i -zpeubs EuroSans-Bold "Euro Sans" nil b -zpeubis EuroSans-BoldItalic "Euro Sans" nil bi -zpeurt EuroMono-Regular "Euro Monospace" nil -zpeurit EuroMono-Italic "Euro Monospace" nil i -zpeubt EuroMono-Bold "Euro Monospace" nil b -zpeubit EuroMono-BoldItalic "Euro Monospace" nil bi - - -DVI DRIVER CONFIGURATION LINES FOR MARVOSYM -=========================================== - -Here are some lines to configure dvips to use the Marvosym fount: - -Dvips psfonts.map entries for the original Marvosym fount: - -fmvr8x Martin_Vogels_Symbole <marvosym.pfb -fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <marvosym.pfb - - -Dvips psfonts.map entries for the Y&Y `ATM compatible' -re-worked Marvosym fount: - -fmvr8x Marvosym <marvosym.pfb -fmvri8x Marvosym " .167 SlantFont" <marvosym.pfb - - -I have assumed that all dvi drivers that can use PostScript Type 1 -founts can also produce fake italic founts by slanting an upright -version. Because of this, I have made no provision for dvi drivers -that can't do this. If you have a dvi driver that can't fake an -italic, please let me know and I'll modify the eurofont package to -take this into account, probably by adding another option and writing -a new fd file. - -Note for Macintosh users - -A Mac version of the Marvosym fount has been created in PostScript Type 1 -and TrueType versions. It uses the Y&Y names as above, and these lines are -be needed for dvips's psfonts.map file: - -fmvr8x Marvosym <Marvo -fmvri8x Marvosym " .167 SlantFont" <Marvo - -And these lines for OzTeX's default config file: - -fmvr8x Marvosym Marvosym nil -fmvri8x Marvosym Marvosym nil i - - -If a version of the original Marvosym fount is ever released for Macs, -these lines will be needed for dvips's psfonts.map file: - -fmvr8x Martin_Vogels_Symbole <MartiVogSym -fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <MartiVogSym - -And these lines for OzTeX's default config file: - -fmvr8x MartiVogSym "Martin Vogels Symbole" nil -fmvri8x MartiVogSym "Martin Vogels Symbole" nil i -\end{filecontents} - -\begin{filecontents}{eurofont.tmp} -\ProvidesFile{eurofont.tmp} -\def\batchfile{eurofont.tmp} -\input{docstrip} -\keepsilent -\generateFile{eurofont.sty}{t}{\from{eurofont.dtx}{package}} -\typeout{Finished stripping the comments from eurofont.dtx.} -\typeout{} -\typeout{To finish the installation, put these files in a sensible place} -\typeout{on your system's TeX search path:} -\typeout{} -\typeout{eurofont.sty, eurofont.cfg, and all the files ending in fd.} -\typeout{} -\typeout{To produce the documentation, run LaTeX on eurofont.dtx.} -\typeout{} -\typeout{To find out what to do with the tfm files, read the documentation.} -\typeout{} -\typeout{You might like to keep the original files safe as a backup, or} -\typeout{in case you want to pass on the eurofont package to someone.} -\typeout{} -\typeout{You can delete:} -\typeout{eurofont.dvi, eurofont.aux, eurofont.toc, eurofont.log, and - eurofont.tmp} -\typeout{} -\endinput -\end{filecontents} -\input{eurofont.tmp} -\endinput diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.pdf b/Master/texmf-dist/doc/fonts/eurofont/eurosamp.pdf Binary files differdeleted file mode 100644 index b165862be0a..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.tex b/Master/texmf-dist/doc/fonts/eurofont/eurosamp.tex deleted file mode 100644 index 2360dc78791..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.tex +++ /dev/null @@ -1,60 +0,0 @@ -% Simple plain TeX test file for Adobe Euro fonts - -\nopagenumbers - -\font\eurosansr=zpeurs -\font\eurosansb=zpeubs -\font\eurosansi=zpeuris -\font\eurosansbi=zpeubis - -\font\euromonor=zpeurt -\font\euromonob=zpeubt -\font\euromonoi=zpeurit -\font\euromonobi=zpeubit - -\font\euroserifr=zpeur -\font\euroserifb=zpeub -\font\euroserifi=zpeuri -\font\euroserifbi=zpeubi - -{\bf The `Euro' fonts in ATM compatible Type 1 format from Adobe} - -\vskip 2mm - -Euro Sans (regular) {\eurosansr This is EuroSans!} - -Euro Sans (bold) {\eurosansb This is EuroSans!} - -Euro Sans (italic) {\eurosansi This is EuroSans!} - -Euro Sans (bold italic) {\eurosansbi This is EuroSans!} - -\vskip 2mm - -Euro Monospace (regular) {\euromonor This is EuroMonospace!} - -Euro Monospace (bold) {\euromonob This is EuroMonospace!} - -Euro Monospace (italic) {\euromonoi This is EuroMonospace!} - -Euro Monospace (bold italic) {\euromonobi This is EuroMonospace!} - -\vskip 2mm - -Euro Serif (regular) {\euroserifr This is EuroSerif!} - -Euro Serif (bold) {\euroserifb This is EuroSerif!} - -Euro Serif (italic) {\euroserifi This is EuroSerif!} - -Euro Serif (bold italic) {\euroserifbi This is EuroSerif!} - -\vskip 2mm - -{\tt http://www.adobe.com/type/eurofont.html} - -\vskip 2mm - -{\tt ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe} - -\end diff --git a/Master/texmf-dist/doc/fonts/eurofont/eutest.dvi b/Master/texmf-dist/doc/fonts/eurofont/eutest.dvi Binary files differdeleted file mode 100644 index 87979be6a7e..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/eutest.dvi +++ /dev/null diff --git a/Master/texmf-dist/doc/fonts/eurofont/eutest.tex b/Master/texmf-dist/doc/fonts/eurofont/eutest.tex deleted file mode 100644 index 558f1c83b81..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/eutest.tex +++ /dev/null @@ -1,46 +0,0 @@ -\documentclass{article} -\usepackage{times,europs} - -\setlength{\parindent}{0mm} -\setlength{\parskip}{2\baselineskip} - -\newcommand{\eutab}[1]{\begin{tabular}{l|cc}% - & upright & italic \\% -\hline% -medium & \textup{\textmd{#1}} & \textit{\textmd{#1}} \\% -bold & \textup{\textbf{#1}} & \textit{\textbf{#1}}% -\end{tabular}} - -\begin{document} - -\def\sampletext{% -The Euro symbol \eur{} comes in different shapes, depending on the -\textbf{current context \eur}. Font changes \textit{can \eur{} be followed, -\textbf{even if \eur{} they are nested}}. \textsf{Changes of \eur{} the font -family} \texttt{are handled \eur{} differently.} -} - -\let\eur\EUR -\sampletext - -\textrm{EuroSerif}:\\ -\eutab{\EURtm}\\ -\let\eur\EURtm -\sampletext - -\textsf{EuroSans}:\\ -\eutab{\EURhv}\\ -\let\eur\EURhv -\sampletext - -\texttt{EuroMono}:\\ -\eutab{\EURcr}\\ -\let\eur\EURcr -\sampletext - -\textrm{official}:\\ -\eutab{\EURofc}\\ -\let\eur\EURofc -\sampletext - -\end{document} diff --git a/Master/texmf-dist/doc/fonts/eurofont/readme.txt b/Master/texmf-dist/doc/fonts/eurofont/readme.txt deleted file mode 100644 index 86129438266..00000000000 --- a/Master/texmf-dist/doc/fonts/eurofont/readme.txt +++ /dev/null @@ -1,124 +0,0 @@ -File readme.txt -Part of the eurofont package -Copyright 1998 Rowland McDonnell -email: rebecca@astrid.u-net.com - -The eurofont package consists of the following files: - -adobeuro - readme.txt - tfmfiles - zpeub.tfm - zpeubi.tfm - zpeubis.tfm - zpeubit.tfm - zpeubs.tfm - zpeubt.tfm - zpeur.tfm - zpeuri.tfm - zpeuris.tfm - zpeurit.tfm - zpeurs.tfm - zpeurt.tfm -eurofont.dtx -eurofont.ins -marvosym - readme.txt - source - fmvr8x.afm - mvrit.tex - tfmfiles - original - fmvr8x.tfm - fmvri8x.tfm - yandy - fmvr8x.tfm - fmvri8x.tfm -readme.txt - -To install the package, do the following: - -Run LaTeX on eurofont.ins - -Put eurofont.sty, eurofont.cfg, and all the files ending in .fd into a -directory on your tex-inputs search path. - -Run LaTeX on eurofont.dtx and print out the documentation. - -Read at least the introductory sections of the documentation. - -If you want to use Adobe's Eurofonts, put the files zpeub.tfm - -zpeurt.tfm (all the files in the adobeuro/tfm/ directory) into a directory -on your tex-fonts search path. The file dvidrive.txt has -information on how to configure your dvi driver to use Adobe's Eurofonts. - -If you want to use the Marvosym fount, read the eurofont package -documentation. The file dvidrive.txt has information on how to configure -your dvi driver to use the marvosym fount. - -Read the documentation so you can set up the package to meet your needs. - - -FONTS CONTAINING EURO SYMBOLS -============================= - -Aside from the Text Companion founts which accompany the EC founts (the T1 -encoded version of the standard Computer Modern founts), Metafont euro -symbols are included in two other founts that I know of, both available -from CTAN. The following urls retrieve the packages from my nearest CTAN -mirror: - -ftp://ftp.tex.ac.uk/tex-archive/macros/latex/contrib/supported/china2e.zip -ftp://ftp.tex.ac.uk/tex-archive/fonts/eurosym.zip - -(other CTAN sites are listed at the end of this document) - -There are PostScript Type 1 founts containing euro symbols: Adobe's -Eurofonts, a set of 12 founts providing seriffed, sanserif, and monospaced -euro symbols in medium upright, italic, bold, and bold italic version; and -the Marvosym fount, which has three euro symbols, very similar to the -medium upright seriffed, sanserif, and monospaced euro symbols from -Adobe. - -Adobe's Eurofonts are available (September 1998) in a Mac version -from here: - -ftp://ftp.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx -ftp://ftp-pac.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx - -For Textures users on Macs, take the installer from CTAN: - -systems/mac/textures/contrib/IdealFonts/EuroDefs.sit.hqx -systems/mac/textures/contrib/IdealFonts/README.IF - -You should still download Adobe's Eurofonts separately. - -And in a version suitable for MS-Windows PCs and Unix from here: - -ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe -ftp://ftp-pac.adobe.com/pub/adobe/type/win/all/eurofont.exe - -these files are self-extracting archives on MS-Windows computers which -can be decompressed on Unix computers with the unzip command. - -The marvosym fount is available from CTAN; this url retrieves the marvosym -fount from my nearest CTAN site (November 1998): - -ftp://ftp.tex.ac.uk/tex-archive/fonts/psfonts/marvosym.zip - - -CTAN SITES -- JANUARY 1999. -=========================== - -The three CTAN primary sites: - -ctan.tug.org (in Massachusetts, USA) -ftp.dante.de (in Deutschland) -ftp.tex.ac.uk (in England) - -this url can point you to your nearest CTAN site - there are many more -than the three above: - -http://www.ucc.ie/cgi-bin/ctan - - diff --git a/Master/texmf-dist/fonts/map/dvips/eurofont/zpeu.map b/Master/texmf-dist/fonts/map/dvips/eurofont/zpeu.map deleted file mode 100644 index 2845e7cce15..00000000000 --- a/Master/texmf-dist/fonts/map/dvips/eurofont/zpeu.map +++ /dev/null @@ -1,12 +0,0 @@ -zpeurs EuroSans-Regular <zpeurs.pfb -zpeubs EuroSans-Bold <zpeubs.pfb -zpeuris EuroSans-Italic <zpeuris.pfb -zpeubis EuroSans-BoldItalic <zpeubis.pfb -zpeurt EuroMono-Regular <zpeurt.pfb -zpeubt EuroMono-Bold <zpeubt.pfb -zpeurit EuroMono-Italic <zpeurit.pfb -zpeubit EuroMono-BoldItalic <zpeubit.pfb -zpeur EuroSerif-Regular <zpeur.pfb -zpeub EuroSerif-Bold <zpeub.pfb -zpeuri EuroSerif-Italic <zpeuri.pfb -zpeubi EuroSerif-BoldItalic <zpeubi.pfb diff --git a/Master/texmf-dist/source/fonts/eurofont/europs.dtx b/Master/texmf-dist/source/fonts/eurofont/europs.dtx deleted file mode 100644 index bc0fb439c52..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/europs.dtx +++ /dev/null @@ -1,145 +0,0 @@ -% \iffalse -%<*driver> -\documentclass{ltxdoc} -\begin{document} -\DocInput{europs.dtx} -\end{document} -%</driver> -% \fi -% -% \changes{v1.2}{1999/01/16}{added \\EURofc, updated documentation} -% \changes{v1.1}{1998/11/02}{switched to docstrip, added subsituition rules} -% \changes{v1.0}{1998/10/29}{initial version, not using docstrip} -% -% \title{\textsf{europs} -- Using Adobe's Euro Currency Symbol Fonts -% with \LaTeXe} -% \author{J\"orn Clausen\footnote{\texttt{joern@TechFak.Uni-Bielefeld.DE}}} -% \maketitle -% -% \section{The Style File} -% First we introduce ourself and request a reasonable \LaTeX{} version. -% \begin{macrocode} -%<*style> -\ProvidesPackage{europs} - [1999/01/16 v1.2 Euro Currency Symbol PostScript] -\NeedsTeXFormat{LaTeX2e} -% \end{macrocode} -% -% I prefer the \textsf{ifthen} package over using plain\TeX{} commands. This -% is said to be more portable, anyway\dots -% \begin{macrocode} -\RequirePackage{ifthen} -% \end{macrocode} -% -% Now we define three macros to access the three font families. The actual -% glyph each macro produces still depends on the current selection of series -% and shape. If the macro |\EURtm| is used inside e.g. |\textbf{}|, the -% macro takes the symbol from EuroSerif Bold. -% \begin{macro}{\EURtm} -% |\EURtm| selects the Euro symbol from the EuroSerif family. The name -% should indicate that this shape can be combined with fonts like Times. -% \begin{macrocode} -\providecommand{\EURtm}{{\fontencoding{U}\fontfamily{zpeu}\selectfont E}} -% \end{macrocode} -% \end{macro} -% \begin{macro}{\EURhv} -% |\EURhv| prints the sans serif version of the Euro symbol. The association -% is that this symbol looks like Helvetica. -% \begin{macrocode} -\providecommand{\EURhv}{{\fontencoding{U}\fontfamily{zpeus}\selectfont E}} -% \end{macrocode} -% \end{macro} -% \begin{macro}{\EURcr} -% |\EURcr| finally is a monospaced version of the Euro symbol. It can be -% combined with Courier and similar typewriter fonts. -% \begin{macrocode} -\providecommand{\EURcr}{{\fontencoding{U}\fontfamily{zpeut}\selectfont E}} -% \end{macrocode} -% \end{macro} -% \begin{macro}{\EUR} -% This macro selects one of the three symbols defined above, depending on -% the current font family. This way, \verb|\EUR| follows all the usual font -% changes one can perform with the \verb|\text..{}| commands. -% \begin{macrocode} -\providecommand{\EUR}{% - \ifthenelse{\equal{\f@family}{\rmdefault}}% - {\EURtm}% - {\ifthenelse{\equal{\f@family}{\ttdefault}}% - {\EURcr}% - {\EURhv}}% - } -% \end{macrocode} -% \end{macro} -% \begin{macro}{\EURofc} -% Having defined all these different symbols, the truth is, that there -% \emph{should} be only one symbol. It is the one represented by -% EuroSans Regular. So if you want to conform with the rules of the European -% bureaucrats, and break the rules of typesetters and designers, you can use -% |\EURofc| to get the ``official'' Euro symbol, independent of the current -% context. -% \begin{macrocode} -\providecommand{\EURofc}{{\usefont{U}{zpeus}{m}{n} E}} -% \end{macrocode} -% \end{macro} -% \begin{macrocode} -%</style> -% \end{macrocode} -% -% \section{The Font Definitions} -% Now we have to provide font definitions to introduce the three families -% to NFSS. -% \subsection{EuroSerif} -% First, the definitions for EuroSerif: -% \begin{macrocode} -%<*uzpeu> -\ProvidesFile{uzpeu.fd} - [1999/01/16 v1.2 font definitions for U/zpeu] -\DeclareFontFamily{U}{zpeu}{} -\DeclareFontShape{U}{zpeu}{m}{n}{<->zpeur}{} -\DeclareFontShape{U}{zpeu}{m}{it}{<->zpeuri}{} -\DeclareFontShape{U}{zpeu}{bx}{n}{<->zpeub}{} -\DeclareFontShape{U}{zpeu}{bx}{it}{<->zpeubi}{} -% \end{macrocode} -% We define some substitution rules that might be useful. -% \begin{macrocode} -\DeclareFontShape{U}{zpeu}{b}{n}{<->ssub * zpeu/bx/n}{} -\DeclareFontShape{U}{zpeu}{b}{it}{<->ssub * zpeu/bx/it}{} -\DeclareFontShape{U}{zpeu}{m}{sl}{<->ssub * zpeu/m/it}{} -\DeclareFontShape{U}{zpeu}{bx}{sl}{<->ssub * zpeu/bx/it}{} -%</uzpeu> -% \end{macrocode} -% -% \subsection{EuroSans} -% The definitions for EuroSans are essentially the same: -% \begin{macrocode} -%<*uzpeus> -\ProvidesFile{uzpeus.fd} - [1999/01/16 v1.2 font definitions for U/zpeus] -\DeclareFontFamily{U}{zpeus}{} -\DeclareFontShape{U}{zpeus}{m}{n}{<->zpeurs}{} -\DeclareFontShape{U}{zpeus}{m}{it}{<->zpeuris}{} -\DeclareFontShape{U}{zpeus}{bx}{n}{<->zpeubs}{} -\DeclareFontShape{U}{zpeus}{bx}{it}{<->zpeubis}{} -\DeclareFontShape{U}{zpeus}{b}{n}{<->ssub * zpeus/bx/n}{} -\DeclareFontShape{U}{zpeus}{b}{it}{<->ssub * zpeus/bx/it}{} -\DeclareFontShape{U}{zpeus}{m}{sl}{<->ssub * zpeus/m/it}{} -\DeclareFontShape{U}{zpeus}{bx}{sl}{<->ssub * zpeus/bx/it}{} -%</uzpeus> -% \end{macrocode} -% \subsection{EuroMono} -% And finally the definitions for EuroMono: -% \begin{macrocode} -%<*uzpeut> -\ProvidesFile{uzpeut.fd} - [1999/01/16 v1.2 font definitions for U/zpeut] -\DeclareFontFamily{U}{zpeut}{} -\DeclareFontShape{U}{zpeut}{m}{n}{<->zpeurt}{} -\DeclareFontShape{U}{zpeut}{m}{it}{<->zpeurit}{} -\DeclareFontShape{U}{zpeut}{bx}{n}{<->zpeubt}{} -\DeclareFontShape{U}{zpeut}{bx}{it}{<->zpeubit}{} -\DeclareFontShape{U}{zpeut}{b}{n}{<->ssub * zpeut/bx/n}{} -\DeclareFontShape{U}{zpeut}{b}{it}{<->ssub * zpeut/bx/it}{} -\DeclareFontShape{U}{zpeut}{m}{sl}{<->ssub * zpeut/m/it}{} -\DeclareFontShape{U}{zpeut}{bx}{sl}{<->ssub * zpeut/bx/it}{} -%<*zpeut> -% \end{macrocode} diff --git a/Master/texmf-dist/source/fonts/eurofont/europs.ins b/Master/texmf-dist/source/fonts/eurofont/europs.ins deleted file mode 100644 index b582af723c3..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/europs.ins +++ /dev/null @@ -1,26 +0,0 @@ -\def\batchfile{europs.ins} -\input docstrip.tex -\preamble - -Copyright 1998 Joern Clausen - -\endpreamble - -\generateFile{europs.sty}{f}{\from{europs.dtx}{style}} -\generateFile{uzpeu.fd}{f}{\from{europs.dtx}{uzpeu}} -\generateFile{uzpeus.fd}{f}{\from{europs.dtx}{uzpeus}} -\generateFile{uzpeut.fd}{f}{\from{europs.dtx}{uzpeut}} - -\Msg{***********************************************************} -\Msg{*} -\Msg{* To finish the installation you have to move the following} -\Msg{* files into a directory searched by TeX:} -\Msg{*} -\Msg{* \space\space europs.sty} -\Msg{* \space\space uzpeu.fd} -\Msg{* \space\space uzpeus.fd} -\Msg{* \space\space uzpeut.fd} -\Msg{*} -\Msg{***********************************************************} - -\endinput diff --git a/Master/texmf-dist/source/fonts/eurofont/install.sh b/Master/texmf-dist/source/fonts/eurofont/install.sh deleted file mode 100644 index 875ac40381d..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/install.sh +++ /dev/null @@ -1,34 +0,0 @@ -#! /bin/sh -# -# install the ADOBE® Euro fonts and TeX support -# -TETEXDIR=/usr/lib/teTeX -DVIPSDIR=$TETEXDIR/texmf/dvips/config -TFMDIR=$TETEXDIR/texmf/fonts/tfm/adobe/eurofont -TYPE1DIR=$TETEXDIR/texmf/fonts/type1/adobe/eurofont - -mkdir -p $TFMDIR -cp -p tfm/* $TFMDIR/ - -cp -p dvips/zpeu.map $DVIPSDIR/ -cat dvips/zpeu.map >>$DVIPSDIR/psfonts.map -cat dvips/zpeu.map >>$DVIPSDIR/pdftex.map - -ncftp ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe -unzip eurofont.exe - -mkdir -p $TYPE1DIR -cp -p eurofont/_1______.PFB ${TYPE1DIR}/zpeurs.pfb -cp -p eurofont/_1B_____.PFB ${TYPE1DIR}/zpeubs.pfb -cp -p eurofont/_1I_____.PFB ${TYPE1DIR}/zpeuris.pfb -cp -p eurofont/_1BI____.PFB ${TYPE1DIR}/zpeubis.pfb -cp -p eurofont/_2______.PFB ${TYPE1DIR}/zpeurt.pfb -cp -p eurofont/_2B_____.PFB ${TYPE1DIR}/zpeubt.pfb -cp -p eurofont/_2I_____.PFB ${TYPE1DIR}/zpeurit.pfb -cp -p eurofont/_2BI____.PFB ${TYPE1DIR}/zpeubit.pfb -cp -p eurofont/_3______.PFB ${TYPE1DIR}/zpeur.pfb -cp -p eurofont/_3B_____.PFB ${TYPE1DIR}/zpeub.pfb -cp -p eurofont/_3I_____.PFB ${TYPE1DIR}/zpeuri.pfb -cp -p eurofont/_3BI____.PFB ${TYPE1DIR}/zpeubi.pfb - -texhash diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/fmvr8x.afm b/Master/texmf-dist/source/fonts/eurofont/marvosym/fmvr8x.afm deleted file mode 100644 index 378d0c4a1dd..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/marvosym/fmvr8x.afm +++ /dev/null @@ -1,121 +0,0 @@ -StartFontMetrics 2.0 -FontName Martin_Vogels_Symbole -Weight Regular -Version 19980521 -IsFixedPitch false -FullName Martin_Vogels_Symbole -UnderlinePosition 0 -ItalicAngle 0.0 -FamilyName Martin Vogels Symbole -Notice Freeware - All rights reserved - http://www.fh-bochum.de/fb1/vogel/marvosym.html -UnderlineThickness 0 -FontBBox -1172 -431 3324 2056 -StartCharMetrics 106 -C 32 ; WX 556 ; N space ; B 556 0 556 0 ; -C 33 ; WX 831 ; N exclam ; B 3 2 741 740 ; -C 34 ; WX 978 ; N quotedbl ; B 0 -176 977 148 ; -C 35 ; WX 978 ; N numbersign ; B 89 3 910 735 ; -C 36 ; WX 978 ; N dollar ; B 89 -174 917 735 ; -C 37 ; WX 978 ; N percent ; B 79 -179 899 735 ; -C 38 ; WX 978 ; N ampersand ; B 273 2 665 725 ; -C 39 ; WX 978 ; N quoteright ; B 320 2 711 725 ; -C 40 ; WX 978 ; N parenleft ; B 278 0 666 731 ; -C 41 ; WX 978 ; N parenright ; B 2 -1 973 718 ; -C 42 ; WX 649 ; N asterisk ; B 16 2 448 484 ; -C 43 ; WX 509 ; N plus ; B 18 66 438 480 ; -C 46 ; WX 861 ; N period ; B 9 1 734 727 ; -C 48 ; WX 556 ; N zero ; B 42 -12 507 719 ; -C 49 ; WX 556 ; N one ; B 79 0 394 719 ; -C 50 ; WX 556 ; N two ; B 25 0 506 719 ; -C 51 ; WX 556 ; N three ; B 38 -12 513 719 ; -C 52 ; WX 556 ; N four ; B 19 0 533 719 ; -C 53 ; WX 556 ; N five ; B 44 -12 526 706 ; -C 54 ; WX 556 ; N six ; B 42 -12 521 719 ; -C 55 ; WX 556 ; N seven ; B 42 0 512 706 ; -C 56 ; WX 556 ; N eight ; B 41 -13 511 719 ; -C 57 ; WX 556 ; N nine ; B 32 -13 510 719 ; -C 61 ; WX 643 ; N equal ; B 20 182 613 646 ; -C 62 ; WX 707 ; N greater ; B 28 46 680 501 ; -C 64 ; WX 975 ; N at ; B 30 -210 972 729 ; -C 65 ; WX 594 ; N A ; B 0 0 566 566 ; -C 66 ; WX 854 ; N B ; B 33 31 702 475 ; -C 67 ; WX 1152 ; N C ; B 79 -9 1081 708 ; -C 69 ; WX 465 ; N E ; B 0 0 382 714 ; -C 70 ; WX 698 ; N F ; B 35 0 662 773 ; -C 72 ; WX 727 ; N H ; B -6 -2 679 1004 ; -C 73 ; WX 1046 ; N I ; B 0 0 996 709 ; -C 75 ; WX 993 ; N K ; B 0 0 842 773 ; -C 77 ; WX 814 ; N M ; B 20 -12 757 726 ; -C 79 ; WX 521 ; N O ; B 22 59 499 543 ; -C 80 ; WX -2 ; N P ; B -572 738 -2 925 ; -C 81 ; WX 769 ; N Q ; B 29 63 733 486 ; -C 82 ; WX 770 ; N R ; B 57 249 711 274 ; -C 83 ; WX 769 ; N S ; B 22 63 727 486 ; -C 84 ; WX 755 ; N T ; B 6 0 725 492 ; -C 85 ; WX 659 ; N U ; B 0 -1 659 659 ; -C 86 ; WX 521 ; N V ; B 18 -8 542 543 ; -C 88 ; WX 521 ; N X ; B 0 -74 497 543 ; -C 90 ; WX 933 ; N Z ; B 19 38 872 455 ; -C 98 ; WX 851 ; N b ; B 25 3 794 565 ; -C 99 ; WX 748 ; N c ; B 23 -21 667 732 ; -C 100 ; WX 686 ; N d ; B 47 -17 623 613 ; -C 101 ; WX 729 ; N e ; B 23 -6 661 693 ; -C 102 ; WX 739 ; N f ; B 0 0 704 713 ; -C 105 ; WX 827 ; N i ; B 9 -3 743 731 ; -C 111 ; WX 739 ; N o ; B 19 11 695 691 ; -C 112 ; WX 0 ; N p ; B -572 585 -2 773 ; -C 113 ; WX 770 ; N q ; B 44 39 712 503 ; -C 114 ; WX 770 ; N r ; B 10 190 665 216 ; -C 115 ; WX 770 ; N s ; B 13 39 681 503 ; -C 116 ; WX 513 ; N t ; B 0 0 488 487 ; -C 117 ; WX 1058 ; N u ; B 1 0 1058 732 ; -C 118 ; WX 1013 ; N v ; B 0 -3 947 723 ; -C 134 ; WX 474 ; N dagger ; B 35 0 454 685 ; -C 135 ; WX 673 ; N daggerdbl ; B 48 3 566 680 ; -C 136 ; WX 475 ; N circumflex ; B 0 2 421 696 ; -C 140 ; WX 772 ; N OE ; B 27 -70 745 739 ; -C 150 ; WX 832 ; N endash ; B 89 263 743 397 ; -C 151 ; WX 820 ; N emdash ; B 83 -2 737 652 ; -C 152 ; WX 684 ; N tilde ; B 81 0 603 652 ; -C 153 ; WX 793 ; N trademark ; B 69 -3 724 652 ; -C 154 ; WX 801 ; N scaron ; B 74 -2 727 652 ; -C 155 ; WX 824 ; N guilsinglright ; B 77 -21 746 647 ; -C 156 ; WX 781 ; N oe ; B 64 -2 717 652 ; -C 164 ; WX 824 ; N currency ; B 10 -10 748 741 ; -C 167 ; WX 790 ; N section ; B 7 0 561 555 ; -C 169 ; WX 615 ; N copyright ; B 19 19 574 574 ; -C 174 ; WX 1382 ; N registered ; B 46 10 1338 770 ; -C 192 ; WX 878 ; N Agrave ; B 67 -20 823 730 ; -C 193 ; WX 825 ; N Aacute ; B 48 -14 763 738 ; -C 194 ; WX 484 ; N Acircumflex ; B 53 -13 417 723 ; -C 195 ; WX 552 ; N Atilde ; B 64 -9 501 735 ; -C 196 ; WX 922 ; N Adieresis ; B 49 -26 886 726 ; -C 197 ; WX 627 ; N Aring ; B 63 5 563 748 ; -C 198 ; WX 649 ; N AE ; B 53 -22 575 729 ; -C 199 ; WX 567 ; N Ccedilla ; B 59 -15 508 721 ; -C 200 ; WX 691 ; N Egrave ; B 45 -14 646 729 ; -C 201 ; WX 544 ; N Eacute ; B 30 1 514 747 ; -C 204 ; WX 171 ; N Igrave ; B 3 3 135 740 ; -C 205 ; WX 157 ; N Iacute ; B 6 1 120 745 ; -C 206 ; WX 269 ; N Icircumflex ; B 1 2 255 749 ; -C 207 ; WX 356 ; N Idieresis ; B 2 2 338 747 ; -C 224 ; WX 947 ; N agrave ; B 37 0 892 745 ; -C 225 ; WX 612 ; N aacute ; B 43 -14 560 725 ; -C 226 ; WX 712 ; N acircumflex ; B 49 0 663 743 ; -C 227 ; WX 952 ; N atilde ; B 51 -12 906 740 ; -C 228 ; WX 807 ; N adieresis ; B 34 -8 767 747 ; -C 229 ; WX 865 ; N aring ; B 36 0 823 745 ; -C 230 ; WX 709 ; N ae ; B 61 -14 679 729 ; -C 231 ; WX 1070 ; N ccedilla ; B 45 -38 1017 731 ; -C 232 ; WX 748 ; N egrave ; B 34 -14 713 729 ; -C 233 ; WX 835 ; N eacute ; B 53 -22 782 729 ; -C 234 ; WX 959 ; N ecircumflex ; B 58 -16 894 728 ; -C 235 ; WX 620 ; N edieresis ; B 28 -14 578 729 ; -C 240 ; WX 722 ; N eth ; B 0 0 718 716 ; -C 241 ; WX 611 ; N ntilde ; B 68 -197 574 530 ; -C 247 ; WX 411 ; N divide ; B 295 306 391 400 ; -C 253 ; WX 1726 ; N yacute ; B 3 0 1623 692 ; -C 254 ; WX 1005 ; N thorn ; B 17 8 939 858 ; -C 255 ; WX 1110 ; N UNKN ; B 46 -199 561 796 ; -EndCharMetrics -EndFontMetrics diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/mvrit.tex b/Master/texmf-dist/source/fonts/eurofont/marvosym/mvrit.tex deleted file mode 100644 index 35a956c3028..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/marvosym/mvrit.tex +++ /dev/null @@ -1,34 +0,0 @@ -%&Plain -% File mvrit.tex -% Copyright 1998 Rowland McDonnell although I don't know why I bother -% -% This is the file used to create the faked italic version of the -% Marvosym metrics. -% -% It requires fontinst, currently (October 1998) available from CTAN: -% -% fonts/utilities/fontinst/ -% -% -\input fontinst.sty - -\installfonts -\afmtomtx{fmvr8x}{fmvr8x} -\mtxtopl{fmvr8x}{fmvr8x} - -%fudge italic from roman -\transformfont{fmvri8x}{\slantfont{167}{\fromafm{fmvr8x}}} - -\endinstallfonts - -\bye - -\endinput - -Notes: - -The file fmvr8x.afm is the original marvosym.afm file re-named. - -fmvri8x.tfm was created from fmvr8x.afm using fontinst and pltotf. - -fmvr8x.tfm is the original fmvr8x.tfm.
\ No newline at end of file diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvr8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvr8x.tfm Binary files differdeleted file mode 100644 index 114800be1a8..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvr8x.tfm +++ /dev/null diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvri8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvri8x.tfm Binary files differdeleted file mode 100644 index 90f48e99e6b..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvri8x.tfm +++ /dev/null diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvr8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvr8x.tfm Binary files differdeleted file mode 100644 index ce403fb48c3..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvr8x.tfm +++ /dev/null diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvri8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvri8x.tfm Binary files differdeleted file mode 100644 index a4a036aab81..00000000000 --- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvri8x.tfm +++ /dev/null diff --git a/Master/texmf-dist/tex/latex/eurofont/eurofont.cfg b/Master/texmf-dist/tex/latex/eurofont/eurofont.cfg deleted file mode 100644 index 563f057dcdb..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/eurofont.cfg +++ /dev/null @@ -1,45 +0,0 @@ -%% LaTeX2e file `eurofont.cfg' -%% generated by the `filecontents' environment -%% from source `eurofont' on 1999/02/02. -%% -% Configuration file for the eurofont package -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Please do change this file as much as you like, but don't distribute -% modified versions. -% -% If you change this file, do make sure that you change the date, -% version number, and identification note below: -% -\ProvidesFile{eurofont.cfg}[1998/11/03 v1.0 Default config file for -the eurofont package] -% -% List contents Corresponding command -% -\EFaddtolist{\userlist}{}% \makeusereuro -\EFaddtolist{\texteurolist}{}% \maketexteuro -\EFaddtolist{\chinaelist}{}% \makechinaeeuro -\EFaddtolist{\cmlist}{cmr,cmss,cmtt}% \makecmeuro -\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro -\EFaddtolist{\sanslist}{pag,phv,psy,pzd}% \makesanseuro -\EFaddtolist{\monolist}{pcr}% \makemonoeuro -\EFaddtolist{\fakemediumlist}{pzc}% \makefakemediumeuro -\EFaddtolist{\fakelightlist}{}% \makefakelighteuro -\EFaddtolist{\fakeheavylist}{}% \makefakeheavyeuro -% -\EFaddtolist{\faketexteurolist}{} -% -% Put all the standard LaTeX weights (and likely extras) -% into one of the following lists: -% -\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx} -\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx} -\EFaddtolist{\EFboldserieslist}{b,bx,bc} -\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx} -% -% And two non-standard weights: -% -\EFaddtolist{\EFultraboldserieslist}{xb,ebd} -% -\endinput diff --git a/Master/texmf-dist/tex/latex/eurofont/eurofont.sty b/Master/texmf-dist/tex/latex/eurofont/eurofont.sty deleted file mode 100644 index ea9c108f1e9..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/eurofont.sty +++ /dev/null @@ -1,562 +0,0 @@ -%% -%% This is file `eurofont.sty', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% eurofont.dtx (with options: `package') -%% -%% IMPORTANT NOTICE: -%% -%% For the copyright see the source file. -%% -%% Any modified versions of this file must be renamed -%% with new filenames distinct from eurofont.sty. -%% -%% For distribution of the original source see the terms -%% for copying and modification in the file eurofont.dtx. -%% -%% This generated file may be distributed as long as the -%% original source files, as listed above, are part of the -%% same distribution. (The sources need not necessarily be -%% in the same archive or directory.) -%%\iffalse -%% File eurofont.sty -%% copyright Rowland McDonnell 1998 -%% email rebecca@astrid.u-net.com -%%\This file is part of the eurofont distribution. You can distribute it -%% freely provided that you include the rest of the eurofont distribution -%% with this file and make no more than a nominal charge to cover the -%% costs of distributing it. -%% -%% If you would like to change the contents of this file, please make a -%% copy of it under a different name and change that instead. Keep my -%% copyright notice attached, but make it clear that the new file is your -%% responsibility so you get the credit for the improvements and I don't -%% get blamed for the bugs. -%% \CheckSum{1267} -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -%% List contents Corresponding command -%% -%% -%% List contents Corresponding command -%% -%% Put all the standard LaTeX weights (and likely extras) -%% into one of the following lists: -\NeedsTeXFormat{LaTeX2e}[1998/06/01] -\ProvidesPackage{eurofont}[1999/01/30 v1.1.3 A package for using euro -symbols] -\def\userlist{} -\def\texteurolist{} -\def\chinaelist{} -\def\cmlist{} -\def\seriflist{} -\def\sanslist{} -\def\monolist{} -\def\fakemediumlist{} -\def\fakelightlist{} -\def\fakeheavylist{} -\def\faketexteurolist{} -\def\EFlightserieslist{} -\def\EFmediumserieslist{} -\def\EFboldserieslist{} -\def\EFultraboldserieslist{} -\newif\ifEF@debugreport -\EF@debugreportfalse% Debugging reports off by default -\def\EF@debugrep#1{\ifEF@debugreport\typeout{eurofont: #1}\fi} -\newif\ifEF@listed -\def\EF@checkiflisted#1#2{% check if element #1 is in list #2 -\EF@listedfalse% -\edef\thiselem{#1}% changed to edef from def RJMM 1/9/98 -\let\@@elt\@elt% Save \@elt (in case this command is executed -\def\@elt##1{\def\testelem{##1}% -\ifx\thiselem\testelem\EF@listedtrue\fi}% -#2\let\@elt\@@elt}% execute list and restore \@elt -\newcommand{\EFaddtolist}[2]{% #1 = list name; -\EF@addtolist#2,:#1\end} -\def\EF@addtolist#1,#2:#3\end{% #3 is the list now -\def\@tempcmda{#2}% -\ifx\@tempcmda\@empty% - \EF@debugrep{Last elem: #1}\relax% if #2 is empty, do this. - \EF@addMember{#1}{#3}% if #2 is empty, do this - \else - \EF@debugrep{elem: #1}\relax% if #2 is not empty, do this - \EF@addMember{#1}{#3}% if #2 is not empty, do this - \EF@addtolist#2:#3\end\fi}% if #2 is not empty, do this -\newcommand{\EF@addMember}[2]{% - %%% add #1 only if it isn't yet in the list - %%% it surely would be more efficient without the check... - {\EF@checkiflisted{#1}{#2}\relax% to suppress space - \ifEF@listed - \EF@debugrep{#1 already in the list}\relax% - \else - \EF@debugrep{adding #1 to \string #2}\relax% - \EF@rightappenditem{#1}{#2}\fi}} -\newtoks\EF@tokb% token list register for temp use -\newcommand{\EF@rightappenditem}[2]% -{\@temptokena={\@elt{#1}}\EF@tokb=\expandafter{#2}% -\xdef#2{\the\EF@tokb\the\@temptokena}}% change the list globally -\newif\ifEF@marvosym\EF@marvosymfalse% Adobe Eurofonts by default -\newif\ifEF@eurosym\EF@eurosymfalse% Don't use eurosym by default -\newif\ifEF@textcomp\EF@textcomptrue% Load the textcomp package if -\newif\ifEF@fixtieaccent\EF@fixtieaccentfalse% Don't re-define tie -\DeclareOption{marvosym} {\EF@marvosymtrue} -\DeclareOption{adobeeurofonts}{\EF@marvosymfalse} -\DeclareOption{eurosym} {\EF@eurosymtrue} -\DeclareOption{noeurosym}{\EF@eurosymfalse} -\DeclareOption{debugreport}{\EF@debugreporttrue} -\DeclareOption{nodebugreport}{\EF@debugreportfalse} -\DeclareOption{notextcomp}{\EF@textcompfalse} -\DeclareOption{textcomp}{\EF@textcomptrue} -\DeclareOption{fixtieaccent}{\EF@fixtieaccenttrue} -\DeclareOption{nofixtieaccent}{\EF@fixtieaccentfalse} -\newcommand*{\fakelighteuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakelighteuro} -\newcommand*{\fakemediumeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakemediumeuro} -\newcommand*{\fakeheavyeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakeheavyeuro} -\DeclareOption{noslantfakeeuro} {% - \def\EF@fakeslant{0}% in case anyone's interested - \newcommand*{\@fakemediumeuro}[1][100] - {\mediumruleeuronoslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakelighteuro}[1][100] - {\lightruleeuronoslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakeheavyeuro}[1][100] - {\heavyruleeuronoslant{\EF@tmprlift}{#1}}} -\DeclareOption{normalslantfakeeuro} {% - \def\EF@fakeslant{1}% in case anyone's interested - \newcommand*{\@fakemediumeuro}[1][100] - {\mediumruleeuronorm{\EF@tmprlift}{#1}} - \newcommand*{\@fakelighteuro}[1][100] - {\lightruleeuronorm{\EF@tmprlift}{#1}} - \newcommand*{\@fakeheavyeuro}[1][100] - {\heavyruleeuronorm{\EF@tmprlift}{#1}}} -\DeclareOption{bigslantfakeeuro} {% - \def\EF@fakeslant{2}% in case anyone's interested - \newcommand*{\@fakemediumeuro}[1][100] - {\mediumruleeurobigslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakelighteuro}[1][100] - {\lightruleeurobigslant{\EF@tmprlift}{#1}} - \newcommand*{\@fakeheavyeuro}[1][100] - {\heavyruleeurobigslant{\EF@tmprlift}{#1}}} -\DeclareOption{left}{\PassOptionsToPackage{left}{eurosym}% -\DeclareRobustCommand{\euros}[1]{\euro\nobreak\,#1}} -\DeclareOption{right}{\PassOptionsToPackage{right}{eurosym}% -\DeclareRobustCommand{\euros}[1]{#1\nobreak\,\euro}} -\DeclareOption{official}{\PassOptionsToPackage{official}{eurosym}} -\DeclareOption{gen}{\PassOptionsToPackage{gen}{eurosym}} -\DeclareOption{gennarrow}{\PassOptionsToPackage{gennarrow}{eurosym}} -\DeclareOption{genwide}{\PassOptionsToPackage{genwide}{eurosym}} -\ExecuteOptions{adobeeurofonts}% Use Adobe's Eurofonts by default -\ExecuteOptions{noeurosym}% Don't use eurosym by default -\ExecuteOptions{left}% Euro symbol on left by default -\ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant by default -\ExecuteOptions{nodebugreport}% No debugging reports by default -\ExecuteOptions{textcomp}% Load the textcomp package by default -\ExecuteOptions{nofixtieaccent}% Don't re-define the tie accent by -\InputIfFileExists{eurofont.cfg}{}% -{\PackageWarningNoLine{eurofont}% -{I can't find the eurofont.cfg configuration file.\MessageBreak -Perhaps something is wrong with this installation?\MessageBreak -The \protect\euro\space command will work with default settings}% -\EFaddtolist{\userlist}{} -\EFaddtolist{\texteurolist}{} -\EFaddtolist{\chinaelist}{} -\EFaddtolist{\cmlist}{cmr,cmss,cmtt} -\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put} -\EFaddtolist{\sanslist}{pag,phv,psy,pzd} -\EFaddtolist{\monolist}{pcr} -\EFaddtolist{\fakemediumlist}{pzc} -\EFaddtolist{\fakelightlist}{} -\EFaddtolist{\fakeheavylist}{} -\EFaddtolist{\faketexteurolist}{} -\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx} -\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx} -\EFaddtolist{\EFboldserieslist}{b,bx,bc} -\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}% -\EFaddtolist{\EFultraboldserieslist}{xb,ebd} -} -\ProcessOptions -\ifEF@textcomp\IfFileExists{textcomp.sty}{\RequirePackage{textcomp}}{}\fi -\ifEF@fixtieaccent \DeclareTextAccentDefault{\t}{OML}\fi -\ifEF@eurosym% -\def\euro{\makefakeeuro} -\IfFileExists{eurosym.sty}{\RequirePackage{eurosym}}{% -\PackageError{eurofont}{I can't find the eurosym package}% -{You've used the eurosym option; this requires the eurosym package -which doesn't appear to be installed}}% -\let\ESeuro\euro -\fi -\newcommand{\showfontfamily}{ -\typeout{**********************************} -\typeout{* \protect\showfontfamily: - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space*} -\typeout{*\space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space*} -\typeout{* The current font family is: \f@family\space *} -\typeout{*\space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space\space\space\space - \space\space\space*} -\typeout{***********************************} -} -\def\EF@crossstrokes#1#2#3#4#5#6#7#8#9{% -\@ifundefined{EF@slantcorr}{\def\EF@slantcorr{100}}{}% -\@tempdima=#8% -\@tempdima=\fontdimen1\font% -\@tempdima=0.1\@tempdima% -\@tempdima=\EF@slantcorr\@tempdima% -\@tempdima=0.1\@tempdima% -\edef\@tempcmda{\strip@pt\@tempdima}% -\@tempdima=#2% Changed from width #1 to height #2 -\@tempdima=\@tempcmda\@tempdima% -\@tempdima=0.5\@tempdima% -\edef\EF@slantC{\the\@tempdima}% -\@tempdimb=#8% centre line spacing of rules -\@tempdimb=\@tempcmda\@tempdimb% -\@tempdimb=0.5\@tempdimb% -\edef\EF@rulehoffset{\the\@tempdimb}% -\@tempdima=#1% \ -\@tempdima=0.01\@tempdima% \ -\@tempdima=#4\@tempdima% } move back to add cross-strokes -\kern-\@tempdima% / -\kern\EF@slantC% / Slant correction forward for italic -\@tempdima=#2% \ -\advance\@tempdima by-#3% \ -\advance\@tempdima by-#8% \ calc lift of cross-strokes -\advance\@tempdima by-#7% / -\@tempdima=0.5\@tempdima% / -\advance\@tempdima by#9% / -\@tempdimc=#8% \ calc cross-stroke spacing -\advance\@tempdimc by-#7% / -\raisebox{\@tempdima}{% -\vbox{% \ -\@tempdimb=#1% \ \ -\@tempdimb=0.01\@tempdimb% } calc width of cross-stroke -\@tempdimb=#5\@tempdimb% / \ -\hbox{\kern\EF@rulehoffset% \ top rule -\vbox{\hrule width\@tempdimb height#7}}% \ -\nointerlineskip% } draw cross-strokes -\vskip\@tempdimc% / (using \@tempdima/b/c from above) -\@tempdimb=#1% \ / -\@tempdimb=0.01\@tempdimb% } calc width of cross-stroke -\@tempdimb=#6\@tempdimb% / / -\hbox{\kern-\EF@rulehoffset% / -\vbox{\hrule width\@tempdimb height#7}}}}% bottom rule -\@tempcnta=#4% \ -\advance\@tempcnta by-#5% (aha!) \ -\@tempdima=#1% \ -\@tempdima=0.01\@tempdima% \ move forward to end of C -\@tempdima=\@tempcnta\@tempdima% / -\kern\@tempdima% / -\kern-\EF@slantC% / slant correction -} -\providecommand\EF@fakeeurobase{C} -\def\EFruleeuro#1#2#3#4#5#6#7{{% Confine defs to \EFruleeuro -\settowidth{\@tempdima}{\EF@fakeeurobase}% -\settoheight{\@tempdimb}{\EF@fakeeurobase}% -\settodepth{\@tempdimc}{\EF@fakeeurobase}% -\edef\EF@Cwidth{\the\@tempdima}% -\edef\EF@Cheight{\the\@tempdimb}% -\edef\EF@Cdepth{\the\@tempdimc}% -\advance\@tempdimb by\@tempdimc% -\def\EF@slantcorr{#7}% -\ifx\EF@slantcorr\@empty\def\EF@slantcorr{100}\fi% -\def\EF@backshift{#1}% percentage of \EF@Cwidth that back shift is -\@tempdimb=0.01\@tempdima% swapped these two lines; -\@tempdimb=\EF@backshift\@tempdimb% dimen can get too big otherwise -\ifdim\@tempdimb>\@tempdima\@tempdima=\@tempdimb\fi% -\makebox[\@tempdima][r]% -{\EF@fakeeurobase\EF@crossstrokes{\EF@Cwidth}{\EF@Cheight}{\EF@Cdepth}% - {\EF@backshift}{#2}{#3}{#4}{#5}{#6}}% -}} -\def\SelectOnWeight#1#2#3#4{% -\EF@checkiflisted{\f@series}{\EFlightserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight light}#1% -\else -\EF@checkiflisted{\f@series}{\EFmediumserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight medium}#2% -\else -\EF@checkiflisted{\f@series}{\EFboldserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight bold}#3% -\else -\EF@checkiflisted{\f@series}{\EFultraboldserieslist}% -\ifEF@listed\EF@debugrep{SelectOnWeight ultrabold}#4% -\else\EF@debugrep{SelectOnWeight default to medium}% -#2% -\fi\fi\fi\fi} -\providecommand*{\mediumruleeuronorm}[2]{\EF@debugrep{medium rule euro norm}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold - new numbers -} -\providecommand*{\mediumruleeuronoslant}[2]{\EF@debugrep{medium rule euro noslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\mediumruleeurobigslant}[2]{\EF@debugrep{medium rule euro bigslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\lightruleeuronorm}[2]{\EF@debugrep{light rule euro norm}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{72}{0.02ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\lightruleeuronoslant}[2]{\EF@debugrep{light rule euro noslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{80}{0.02ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\lightruleeurobigslant}[2]{\EF@debugrep{light rule euro bigslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{60}{0.02ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold -} -\providecommand*{\heavyruleeuronorm}[2]{\EF@debugrep{heavy rule euro norm}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{72}{0.22ex}{0.30ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{72}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold -} -\providecommand*{\heavyruleeuronoslant}[2]{\EF@debugrep{heavy rule euro noslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{80}{0.22ex}{0.30ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{80}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold -} -\providecommand*{\heavyruleeurobigslant}[2]{\EF@debugrep{heavy rule euro bigslant}% -\SelectOnWeight% -{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% light -{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% medium -{\EFruleeuro{110}{80}{60}{0.22ex}{0.30ex}{#1}{#2}}% bold -{\EFruleeuro{110}{80}{60}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold -} -\def\EF@mvs{\fontencoding{U}\fontfamily{zmvs}\fontseries{m}\selectfont} -\providecommand{\marvosymeuro}[1]{% -\EF@debugrep{marvosymeuro}% -\SelectOnWeight% -{\EF@mvs\char#1}% light -{\EF@mvs\char#1}% medium -{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% bold -{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% ultra bold -} -\providecommand - {\marvosymserifeuro}{\EF@debugrep{marvosymserifeuro}\marvosymeuro{101}} -\providecommand - {\marvosymsanseuro}{\EF@debugrep{marvosymsanseuro}\marvosymeuro{99}} -\providecommand - {\marvosymmonoeuro}{\EF@debugrep{marvosymmonoeuro}\marvosymeuro{100}} -\newlength{\EF@pmbshift} -\newcommand{\EF@pmsb}[1]{% -\EF@debugrep{EF@pmsb}% -\EF@pmbshift=0.020em% as was -\hbox{% -\rlap{#1}% -\kern0.5\EF@pmbshift% -\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern1\EF@pmbshift% -\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern0.5\EF@pmbshift% -#1}} -\newcommand{\EF@pmb}[1]{% -\EF@debugrep{EF@pmb}% -\EF@pmbshift=0.020em% as was -\hbox{% -\rlap{#1}% -\kern0.5\EF@pmbshift% -\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern1\EF@pmbshift% -\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}% -\kern0.5\EF@pmbshift% -#1}} -\def\EFiftexteuroexists#1#2{% -\EF@checkiflisted{\f@family}{\faketexteurolist}% -\ifEF@listed#2% -\else -\ifx\texteuro\@undefined#2% if \texteuro doesn't exist, #2 and finish -\else% -\IfFileExists{ts1\f@family.fd}% -{#1}% if ts1<fam>.fd exists, #1. Can't usefully test for glyph existing -{#2}% if ts1<fam>.fd doesn't exist, #2 and finish -\fi\fi} -\providecommand{\zpeutteuro}{\EF@debugrep{zpeutteuro}% -{\fontencoding{U}\fontfamily{zpeutt}\selectfont e}} -\providecommand{\zpeureuro}{\EF@debugrep{zpeureuro}% -{\fontencoding{U}\fontfamily{zpeur}\selectfont e}} -\providecommand{\zpeusseuro}{\EF@debugrep{zpeusseuro}% -{\fontencoding{U}\fontfamily{zpeuss}\selectfont e}} -\ifEF@marvosym -\providecommand{\monoeuro}{\EF@debugrep{monoeuro}{\marvosymmonoeuro}} -\providecommand{\serifeuro}{\EF@debugrep{serifeuro}{\marvosymserifeuro}} -\providecommand{\sanseuro}{\EF@debugrep{sanseuro}{\marvosymsanseuro}} -\else -\providecommand{\monoeuro}{\EF@debugrep{monoeuro}\zpeutteuro} -\providecommand{\serifeuro}{\EF@debugrep{serifeuro}\zpeureuro} -\providecommand{\sanseuro}{\EF@debugrep{sanseuro}\zpeusseuro} -\fi -\providecommand{\makeusereuro} - {\EF@debugrep{makeusereuro}\makefakemediumeuro% -\PackageWarningNoLine{eurofont}{% -You have tried to use the \protect\makeusereuro\space command -to\MessageBreak print a euro symbol, but you have not defined -the\MessageBreak \protect\makeusereuro\space command. This has -probably happened in\MessageBreak the \protect\euro\space command. I -shall print a faked euro symbol\MessageBreak for now}} -\DeclareFontFamily{OT1}{chin}{} -\DeclareFontShape{OT1}{chin}{m}{n}{<-> china10}{} -\providecommand{\chinaeeuro}{% -\IfFileExists{china2e.sty}% -{\EF@debugrep{chinaeeuro}% -\SelectOnWeight% -{{\usefont{OT1}{chin}{m}{n}\char255}}% light -{{\usefont{OT1}{chin}{m}{n}\char255}}% medium -{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% bold -{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% ultra bold -}% -{\EF@debugrep{chinaeeuro - we have a problem}% -\PackageWarning{eurofont}{% -The \protect\euro\space command -is trying to print a euro symbol\MessageBreak -from the China2e fount, but I can't find the file\MessageBreak -china2e.sty.\MessageBreak\MessageBreak -I'm assuming that you've not got the China2e font\MessageBreak -installed, so I'm printing a faked euro instead\MessageBreak}% -\makefakeeuro}} -\providecommand{\cmrfakeeuro}{% -\EF@debugrep{\protect\cmrfakeeuro}\fakelighteuro} -\providecommand{\cmssfakeeuro}{% -\EF@debugrep{\protect\cmssfakeeuro}\fakemediumeuro} -\providecommand{\cmttfakeeuro}{% -\EF@debugrep{\protect\cmttfakeeuro}\fakemediumeuro} -\providecommand{\makefakemediumeuro}{\EF@debugrep{makefakemediumeuro}% -\@ifundefined{\f@family fakeeuro}{\fakemediumeuro}% -{\csname\f@family fakeeuro\endcsname}} -\providecommand{\makefakelighteuro}{\EF@debugrep{makefakelighteuro}% -\@ifundefined{\f@family fakeeuro}{\fakelighteuro}% -{\csname\f@family fakeeuro\endcsname}} -\providecommand{\makefakeheavyeuro}{\EF@debugrep{makefakeheavyeuro}% -\@ifundefined{\f@family fakeeuro}{\fakeheavyeuro}% -{\csname\f@family fakeeuro\endcsname}} -\providecommand{\makefakeeuro}{\EF@debugrep{makefakeeuro}% -\@ifundefined{\f@family fakeeuro}{% -\EF@checkiflisted{\f@family}{\fakelightlist}\relax - \ifEF@listed \makefakelighteuro - \else - \EF@checkiflisted{\f@family}{\fakemediumlist}\relax - \ifEF@listed \makefakemediumeuro - \else - \EF@checkiflisted{\f@family}{\fakeheavylist}\relax - \ifEF@listed \makefakeheavyeuro - \else% If <fam>'s not listed, - \makefakemediumeuro% print medium faked euro - \fi \fi \fi -}% -{\csname\f@family fakeeuro\endcsname}} -\providecommand{\pzcfakeeuro}{\EF@debugrep{pzcfakeeuro}% -\fakemediumeuro[-0.1ex]} -\providecommand{\maketexteuro}{\EF@debugrep{maketexteuro}% -\EFiftexteuroexists{\texteuro}{\makefakeeuro}} -\providecommand{\cmeuro}{\EF@debugrep{cmeuro}% -\EFiftexteuroexists{\texteuro}{\makefakeeuro}} -\ifEF@eurosym -\EF@debugrep{Using eurosym's euro command} -\providecommand{\makecmeuro} {\EF@debugrep{makecmeuro; ESeuro}\ESeuro} -\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro; ESeuro}\ESeuro} -\providecommand{\makeserifeuro} {\EF@debugrep{makeserifeuro; ESeuro}\ESeuro} -\providecommand{\makesanseuro} {\EF@debugrep{makesanseuro; ESeuro}\ESeuro} -\providecommand{\makemonoeuro} {\EF@debugrep{makemonoeuro; ESeuro}\ESeuro} -\else -\EF@debugrep{Not using eurosym's euro command} -\providecommand{\makecmeuro} {\EF@debugrep{makecmeuro }\cmeuro} -\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro}\makefakeeuro} -\providecommand{\makeserifeuro} {\EF@debugrep{makeserifeuro }\serifeuro} -\providecommand{\makesanseuro} {\EF@debugrep{makesanseuro }\sanseuro} -\providecommand{\makemonoeuro} {\EF@debugrep{makemonoeuro }\monoeuro} -\fi -\providecommand{\makechinaeeuro} - {\EF@debugrep{makechinaeeuro}\chinaeeuro} -\DeclareRobustCommand{\EFeuro}{\EF@debugrep{start EFeuro: - \f@encoding/\f@family/\f@series/\f@shape}% - \EF@checkiflisted{\f@family}{\userlist}\relax - \ifEF@listed\EF@debugrep{EFeuro makeuser euro}\makeusereuro - \else - \@ifundefined{\f@family euro}{\@tempswatrue}% test for \<fam>euro - {\EF@debugrep{EFeuro \f@family euro}\relax% do \<fam>euro - \@tempswafalse\csname\f@family euro\endcsname}\relax% do \<fam>euro - \if@tempswa% if \<fam>euro doesn't exist, do the next test - \EF@checkiflisted{\f@family}{\texteurolist}\relax - \ifEF@listed \EF@debugrep{EFeuro texteuro}\maketexteuro - \else - \EF@checkiflisted{\f@family}{\chinaelist}\relax - \ifEF@listed \EF@debugrep{EFeuro China2e euro}\makechinaeeuro - \else - \EF@checkiflisted{\f@family}{\cmlist}\relax - \ifEF@listed \EF@debugrep{EFeuro cm euro}\makecmeuro - \else - \EF@checkiflisted{\f@family}{\seriflist}\relax - \ifEF@listed \EF@debugrep{EFeuro serif euro}\makeserifeuro - \else - \EF@checkiflisted{\f@family}{\sanslist}\relax - \ifEF@listed \EF@debugrep{EFeuro sans euro}\makesanseuro - \else - \EF@checkiflisted{\f@family}{\monolist}\relax - \ifEF@listed \EF@debugrep{EFeuro mono euro}\makemonoeuro - \else - \EF@checkiflisted{\f@family}{\fakelightlist}\relax - \ifEF@listed \EF@debugrep{EFeuro fake light euro}\makefakelighteuro - \else - \EF@checkiflisted{\f@family}{\fakemediumlist}\relax - \ifEF@listed \EF@debugrep{EFeuro fake med euro}\makefakemediumeuro - \else - \EF@checkiflisted{\f@family}{\fakeheavylist}\relax - \ifEF@listed \EF@debugrep{EFeuro fake heavy euro}\makefakeheavyeuro - \else \EF@debugrep{EFeuro default euro}\makedefaulteuro - \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi} -\AtBeginDocument{% -\let\oldeuro\euro% save the previous \euro command (if one exists) -\let\euro\EFeuro}% make the \euro command be \EFeuro come what may -\endinput -%% -%% End of file `eurofont.sty'. diff --git a/Master/texmf-dist/tex/latex/eurofont/europs.sty b/Master/texmf-dist/tex/latex/eurofont/europs.sty deleted file mode 100644 index 7fbaa82a615..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/europs.sty +++ /dev/null @@ -1,28 +0,0 @@ -%% -%% This is file `europs.sty', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% europs.dtx (with options: `style') -%% -%% Copyright 1998 Joern Clausen -%% -\ProvidesPackage{europs} - [1999/01/16 v1.2 Euro Currency Symbol PostScript] -\NeedsTeXFormat{LaTeX2e} -\RequirePackage{ifthen} -\providecommand{\EURtm}{{\fontencoding{U}\fontfamily{zpeu}\selectfont E}} -\providecommand{\EURhv}{{\fontencoding{U}\fontfamily{zpeus}\selectfont E}} -\providecommand{\EURcr}{{\fontencoding{U}\fontfamily{zpeut}\selectfont E}} -\providecommand{\EUR}{% - \ifthenelse{\equal{\f@family}{\rmdefault}}% - {\EURtm}% - {\ifthenelse{\equal{\f@family}{\ttdefault}}% - {\EURcr}% - {\EURhv}}% - } -\providecommand{\EURofc}{{\usefont{U}{zpeus}{m}{n} E}} -\endinput -%% -%% End of file `europs.sty'. diff --git a/Master/texmf-dist/tex/latex/eurofont/uzmvs.fd b/Master/texmf-dist/tex/latex/eurofont/uzmvs.fd deleted file mode 100644 index 7d69bf7246e..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzmvs.fd +++ /dev/null @@ -1,47 +0,0 @@ -%% LaTeX2e file `uzmvs.fd' -%% generated by the `filecontents' environment -%% from source `eurofont' on 1999/02/02. -%% -% Filename: uzmvs.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Marvosym -% -% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY -% -% The slightly strange name is because Marvosym already has an -% official name and I'd like to avoid any conflicts. So make the -% Marvosym used by eurofont.sty a bizzare one (z prefix) because -% nothing else seems right to me. -% -% Please don't use this file for anything directly: it's meant to -% provide NFSS fount definitions so that the eurofont package can make -% a half-decent job of printing euro symbols using the Marvosym -% fount. Because of this, it's a bit eccentric to match eurofont's -% eccentric way of doing things. -% -% If you want to modify the code in this file, save the file under a -% different name and modify *that*. Please make sure you add a note -% indicating that you've changed things. -% -\ProvidesFile{uzmvs.fd} - [1998/10/10 Hacked by RJMM font definitions for U/zmvs.] -% -\DeclareFontFamily{U}{zmvs}{} -\DeclareFontShape{U}{zmvs}{m}{n} {<-> fmvr8x}{} -% -% Extra font defs needed -\DeclareFontShape{U}{zmvs}{m}{it}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{m}{sl}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{m}{sc}{<-> fmvr8x}{} -% -\DeclareFontShape{U}{zmvs}{l}{n} {<-> fmvr8x}{} -\DeclareFontShape{U}{zmvs}{l}{it}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{l}{sl}{<-> fmvri8x}{} -\DeclareFontShape{U}{zmvs}{l}{sc}{<-> fmvr8x}{} -% -\DeclareFontShape{U}{zmvs}{l} {ui} {<->ssub * zmvs/m/n}{} -\DeclareFontShape{U}{zmvs}{m} {ui} {<->ssub * zmvs/m/n}{} -% -\endinput diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeu.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeu.fd deleted file mode 100644 index 75dc4b56d4a..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzpeu.fd +++ /dev/null @@ -1,24 +0,0 @@ -%% -%% This is file `uzpeu.fd', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% europs.dtx (with options: `uzpeu') -%% -%% Copyright 1998 Joern Clausen -%% -\ProvidesFile{uzpeu.fd} - [1999/01/16 v1.2 font definitions for U/zpeu] -\DeclareFontFamily{U}{zpeu}{} -\DeclareFontShape{U}{zpeu}{m}{n}{<->zpeur}{} -\DeclareFontShape{U}{zpeu}{m}{it}{<->zpeuri}{} -\DeclareFontShape{U}{zpeu}{bx}{n}{<->zpeub}{} -\DeclareFontShape{U}{zpeu}{bx}{it}{<->zpeubi}{} -\DeclareFontShape{U}{zpeu}{b}{n}{<->ssub * zpeu/bx/n}{} -\DeclareFontShape{U}{zpeu}{b}{it}{<->ssub * zpeu/bx/it}{} -\DeclareFontShape{U}{zpeu}{m}{sl}{<->ssub * zpeu/m/it}{} -\DeclareFontShape{U}{zpeu}{bx}{sl}{<->ssub * zpeu/bx/it}{} -\endinput -%% -%% End of file `uzpeu.fd'. diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeur.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeur.fd deleted file mode 100644 index d31999f9ae6..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzpeur.fd +++ /dev/null @@ -1,43 +0,0 @@ -%% LaTeX2e file `uzpeur.fd' -%% generated by the `filecontents' environment -%% from source `eurofont' on 1999/02/02. -%% -% Filename: uzpeur.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Adobe Euroserif -% -%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY - -\ProvidesFile{uzpeur.fd} - [1998/10/10 Eurofont package font definitions for U/zpeur.] - -\DeclareFontFamily{U}{zpeur}{\hyphenchar\font\m@ne}% - -\DeclareFontShape{U}{zpeur}{m}{n} {<->zpeur} {} -\DeclareFontShape{U}{zpeur}{m}{it}{<->zpeuri}{} -\DeclareFontShape{U}{zpeur}{m}{sl}{<->ssub * zpeur/m/it}{} -\DeclareFontShape{U}{zpeur}{m}{sc}{<->ssub * zpeur/m/n}{} - -\DeclareFontShape{U}{zpeur}{b}{n} {<->zpeub} {} -\DeclareFontShape{U}{zpeur}{b}{it}{<->zpeubi}{} -\DeclareFontShape{U}{zpeur}{b}{sl}{<->ssub * zpeur/b/it} {} -\DeclareFontShape{U}{zpeur}{b}{sc}{<->ssub * zpeur/b/n}{} - -\DeclareFontShape{U}{zpeur}{l}{n} {<->ssub * zpeur/m/n} {} -\DeclareFontShape{U}{zpeur}{l}{it}{<->ssub * zpeur/m/it}{} -\DeclareFontShape{U}{zpeur}{l}{sl}{<->ssub * zpeur/m/it}{} -\DeclareFontShape{U}{zpeur}{l}{sc}{<->ssub * zpeur/m/n} {} - -\DeclareFontShape{U}{zpeur}{bx}{n} {<->ssub * zpeur/b/n} {} -\DeclareFontShape{U}{zpeur}{bx}{it}{<->ssub * zpeur/b/it}{} -\DeclareFontShape{U}{zpeur}{bx}{sl}{<->ssub * zpeur/b/it}{} -\DeclareFontShape{U}{zpeur}{bx}{sc}{<->ssub * zpeur/b/n} {} - -\DeclareFontShape{U}{zpeur}{l} {ui} {<->ssub * zpeur/m/n}{} -\DeclareFontShape{U}{zpeur}{m} {ui} {<->ssub * zpeur/m/n}{} -\DeclareFontShape{U}{zpeur}{b} {ui} {<->ssub * zpeur/b/n}{} -\DeclareFontShape{U}{zpeur}{bx}{ui} {<->ssub * zpeur/b/n}{} -% -\endinput diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeus.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeus.fd deleted file mode 100644 index 49103abfd4f..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzpeus.fd +++ /dev/null @@ -1,24 +0,0 @@ -%% -%% This is file `uzpeus.fd', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% europs.dtx (with options: `uzpeus') -%% -%% Copyright 1998 Joern Clausen -%% -\ProvidesFile{uzpeus.fd} - [1999/01/16 v1.2 font definitions for U/zpeus] -\DeclareFontFamily{U}{zpeus}{} -\DeclareFontShape{U}{zpeus}{m}{n}{<->zpeurs}{} -\DeclareFontShape{U}{zpeus}{m}{it}{<->zpeuris}{} -\DeclareFontShape{U}{zpeus}{bx}{n}{<->zpeubs}{} -\DeclareFontShape{U}{zpeus}{bx}{it}{<->zpeubis}{} -\DeclareFontShape{U}{zpeus}{b}{n}{<->ssub * zpeus/bx/n}{} -\DeclareFontShape{U}{zpeus}{b}{it}{<->ssub * zpeus/bx/it}{} -\DeclareFontShape{U}{zpeus}{m}{sl}{<->ssub * zpeus/m/it}{} -\DeclareFontShape{U}{zpeus}{bx}{sl}{<->ssub * zpeus/bx/it}{} -\endinput -%% -%% End of file `uzpeus.fd'. diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeuss.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeuss.fd deleted file mode 100644 index d777905095c..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzpeuss.fd +++ /dev/null @@ -1,43 +0,0 @@ -%% LaTeX2e file `uzpeuss.fd' -%% generated by the `filecontents' environment -%% from source `eurofont' on 1999/02/02. -%% -% Filename: uzpeuss.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Adobe Eurosans -% -%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY - -\ProvidesFile{uzpeuss.fd} - [1998/10/10 Eurofont package font definitions for U/zpeuss.] - -\DeclareFontFamily{U}{zpeuss}{\hyphenchar\font\m@ne}% - -\DeclareFontShape{U}{zpeuss}{m}{n} {<->zpeurs} {} -\DeclareFontShape{U}{zpeuss}{m}{it}{<->zpeuris}{} -\DeclareFontShape{U}{zpeuss}{m}{sl}{<->ssub * zpeuss/m/it}{} -\DeclareFontShape{U}{zpeuss}{m}{sc}{<->ssub * zpeuss/m/n}{} - -\DeclareFontShape{U}{zpeuss}{b}{n} {<->zpeubs} {} -\DeclareFontShape{U}{zpeuss}{b}{it}{<->zpeubis}{} -\DeclareFontShape{U}{zpeuss}{b}{sl}{<->ssub * zpeuss/b/it} {} -\DeclareFontShape{U}{zpeuss}{b}{sc}{<->ssub * zpeuss/b/n}{} - -\DeclareFontShape{U}{zpeuss}{l}{n} {<->ssub * zpeuss/m/n}{} -\DeclareFontShape{U}{zpeuss}{l}{it}{<->ssub * zpeuss/m/it}{} -\DeclareFontShape{U}{zpeuss}{l}{sl}{<->ssub * zpeuss/m/it}{} -\DeclareFontShape{U}{zpeuss}{l}{sc}{<->ssub * zpeuss/m/n} {} - -\DeclareFontShape{U}{zpeuss}{bx}{n} {<->ssub * zpeuss/b/n} {} -\DeclareFontShape{U}{zpeuss}{bx}{it}{<->ssub * zpeuss/b/it}{} -\DeclareFontShape{U}{zpeuss}{bx}{sl}{<->ssub * zpeuss/b/it}{} -\DeclareFontShape{U}{zpeuss}{bx}{sc}{<->ssub * zpeuss/b/n} {} - -\DeclareFontShape{U}{zpeuss}{l} {ui} {<->ssub * zpeuss/m/n}{} -\DeclareFontShape{U}{zpeuss}{m} {ui} {<->ssub * zpeuss/m/n}{} -\DeclareFontShape{U}{zpeuss}{b} {ui} {<->ssub * zpeuss/m/b}{} -\DeclareFontShape{U}{zpeuss}{bx}{ui} {<->ssub * zpeuss/m/b}{} -% -\endinput diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeut.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeut.fd deleted file mode 100644 index bd600d7f70f..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzpeut.fd +++ /dev/null @@ -1,24 +0,0 @@ -%% -%% This is file `uzpeut.fd', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% europs.dtx (with options: `uzpeut') -%% -%% Copyright 1998 Joern Clausen -%% -\ProvidesFile{uzpeut.fd} - [1999/01/16 v1.2 font definitions for U/zpeut] -\DeclareFontFamily{U}{zpeut}{} -\DeclareFontShape{U}{zpeut}{m}{n}{<->zpeurt}{} -\DeclareFontShape{U}{zpeut}{m}{it}{<->zpeurit}{} -\DeclareFontShape{U}{zpeut}{bx}{n}{<->zpeubt}{} -\DeclareFontShape{U}{zpeut}{bx}{it}{<->zpeubit}{} -\DeclareFontShape{U}{zpeut}{b}{n}{<->ssub * zpeut/bx/n}{} -\DeclareFontShape{U}{zpeut}{b}{it}{<->ssub * zpeut/bx/it}{} -\DeclareFontShape{U}{zpeut}{m}{sl}{<->ssub * zpeut/m/it}{} -\DeclareFontShape{U}{zpeut}{bx}{sl}{<->ssub * zpeut/bx/it}{} -\endinput -%% -%% End of file `uzpeut.fd'. diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeutt.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeutt.fd deleted file mode 100644 index ca11d7f26f5..00000000000 --- a/Master/texmf-dist/tex/latex/eurofont/uzpeutt.fd +++ /dev/null @@ -1,43 +0,0 @@ -%% LaTeX2e file `uzpeutt.fd' -%% generated by the `filecontents' environment -%% from source `eurofont' on 1999/02/02. -%% -%Filename: uzpeutt.fd -% Copyright 1998 Rowland McDonnell -% email rebecca@astrid.u-net.com -% -% Fount definitions for Adobe Euromono -% -%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY - -\ProvidesFile{Uzpeutt.fd} - [1998/10/10 Eurofont package font definitions for U/zpeutt.] - -\DeclareFontFamily{U}{zpeutt}{\hyphenchar\font\m@ne}% - -\DeclareFontShape{U}{zpeutt}{m}{n} {<->zpeurt} {} -\DeclareFontShape{U}{zpeutt}{m}{it}{<->zpeurit}{} -\DeclareFontShape{U}{zpeutt}{m}{sl}{<->ssub * zpeutt/m/it}{} -\DeclareFontShape{U}{zpeutt}{m}{sc}{<->ssub * zpeutt/m/n}{} - -\DeclareFontShape{U}{zpeutt}{b}{n} {<->zpeubt} {} -\DeclareFontShape{U}{zpeutt}{b}{it}{<->zpeubit}{} -\DeclareFontShape{U}{zpeutt}{b}{sl}{<->ssub * zpeutt/b/it} {} -\DeclareFontShape{U}{zpeutt}{b}{sc}{<->ssub * zpeutt/b/n}{} - -\DeclareFontShape{U}{zpeutt}{l}{n} {<->ssub * zpeutt/m/n}{} -\DeclareFontShape{U}{zpeutt}{l}{it}{<->ssub * zpeutt/m/it}{} -\DeclareFontShape{U}{zpeutt}{l}{sl}{<->ssub * zpeutt/m/it}{} -\DeclareFontShape{U}{zpeutt}{l}{sc}{<->ssub * zpeutt/m/n} {} - -\DeclareFontShape{U}{zpeutt}{bx}{n} {<->ssub * zpeutt/b/n} {} -\DeclareFontShape{U}{zpeutt}{bx}{it}{<->ssub * zpeutt/b/it}{} -\DeclareFontShape{U}{zpeutt}{bx}{sl}{<->ssub * zpeutt/b/it}{} -\DeclareFontShape{U}{zpeutt}{bx}{sc}{<->ssub * zpeutt/b/n} {} - -\DeclareFontShape{U}{zpeutt}{l} {ui} {<->ssub * zpeutt/m/n}{} -\DeclareFontShape{U}{zpeutt}{m} {ui} {<->ssub * zpeutt/m/n}{} -\DeclareFontShape{U}{zpeutt}{b} {ui} {<->ssub * zpeutt/m/b}{} -\DeclareFontShape{U}{zpeutt}{bx}{ui} {<->ssub * zpeutt/m/b}{} -% -\endinput diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds index 7c3a8d45e2e..c560a091f54 100755 --- a/Master/tlpkg/libexec/ctan2tds +++ b/Master/tlpkg/libexec/ctan2tds @@ -303,7 +303,7 @@ chomp ($Build = `cd $Master/../Build/source && pwd`); 'euclide', "&MAKEpst", 'eukleides', "die 'skipping, requires compilation'", 'eulervm', "&MAKEcopy", - 'eurofont', "die 'skipping, not ready, sorry'", + 'eurofont', "die 'skipping, support for nonfree fonts or obsolete'", 'europs', "die, skipping, support for nonfree fonts", 'eurosans', "die, skipping, support for nonfree fonts", 'eurosym', "&MAKEflatten", diff --git a/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc b/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc index 8de947b309a..0bd3afbfa85 100644 --- a/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc +++ b/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc @@ -11,7 +11,6 @@ depend cmextra depend courier depend euro depend euro-ce -depend eurofont depend eurosym depend fpl depend helvetic diff --git a/Master/tlpkg/tlpsrc/eurofont.tlpsrc b/Master/tlpkg/tlpsrc/eurofont.tlpsrc deleted file mode 100644 index bedf455f90f..00000000000 --- a/Master/tlpkg/tlpsrc/eurofont.tlpsrc +++ /dev/null @@ -1,2 +0,0 @@ -execute addMap zpeu.map -docpattern +!d texmf-dist/doc/fonts/fontinst/examples/eurofont |