yaletter (2jan17)

git-svn-id: svn://tug.org/texlive/trunk@42830 c570f23f-e606-0410-a88d-b1316a301751

10 files changed, 3082 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/yaletter/CHANGES b/Master/texmf-dist/doc/latex/yaletter/CHANGES
new file mode 100644
index 00000000000..3c59b938d08
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/yaletter/CHANGES
@@ -0,0 +1,10 @@
+v1.1:  1 January 1201 (1 January 2017):  There was an error
+in setting defaults that meant that paper size had to be set
+explicitly.  Now it's set to the default installation paper
+size, and must be explicitly changed.  Also, the default
+bottom margin was changed to a full inch, to leave room for
+the footer.  Finally, added the "signatureword" option to
+the documentation.
+
+v1.0:  23 December 1200 (27 December 2016):  Initial
+release.
diff --git a/Master/texmf-dist/doc/latex/yaletter/README b/Master/texmf-dist/doc/latex/yaletter/README
new file mode 100644
index 00000000000..460b8b5d6ed
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/yaletter/README
@@ -0,0 +1,31 @@
++AMDG
+
+This document is copyright 2016 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3 of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of the files yaletter.ins and
+yaletter.dtx, along with derived files yaletter.cls and
+yaletter.pdf.
+
+The yaletter class provides extremely configurable macros
+for typesetting letters in any conceivable style.  It
+provides facilities for maintaining easily-accessible
+databases of letterheads and addresses for repeat use.  It
+further provides easy macros for envelopes and for label
+sheets.  Finally, it provides some nice defaults for a few
+of the more common styles and sizes.
+
+This class should run properly on any reasonably up-to-date
+and operational LaTeX system.
diff --git a/Master/texmf-dist/doc/latex/yaletter/lppl.txt b/Master/texmf-dist/doc/latex/yaletter/lppl.txt
new file mode 100644
index 00000000000..22443139013
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/yaletter/lppl.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/doc/latex/yaletter/yaletter.pdf b/Master/texmf-dist/doc/latex/yaletter/yaletter.pdf
new file mode 100644
index 00000000000..82c6a91d83f
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/yaletter/yaletter.pdf
diff --git a/Master/texmf-dist/source/latex/yaletter/yaletter.dtx b/Master/texmf-dist/source/latex/yaletter/yaletter.dtx
new file mode 100644
index 00000000000..0357364972f
--- /dev/null
+++ b/Master/texmf-dist/source/latex/yaletter/yaletter.dtx
@@ -0,0 +1,1962 @@
+% \iffalse
+% +AMDG  This document was begun on 6 December 1200, the
+% feast of St. Nicholas, and it is humbly dedicated to him
+% and to the Immaculate Heart of Mary for her prayers, and
+% to the Sacred Heart of Jesus for His mercy.
+%
+% This document is copyright 2016 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3 of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of yaletter.dtx, yaletter.ins, and
+% derived files yaletter.cls and yaletter.pdf.
+% \fi
+
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1996/06/01]
+%<package>\ProvidesClass{yaletter}[2017/01/01 v1.1 Yet Another Letter Class]
+%<*driver>
+\documentclass[12pt]{ltxdoc}
+
+\usepackage{doc}
+\usepackage{longtable}
+\usepackage{array}
+\usepackage{lettrine}
+	\setcounter{DefaultLines}{3}
+	\setlength{\DefaultFindent}{2pt}
+	\renewcommand{\LettrineFontHook}{\color{red}}
+\usepackage{url}
+\usepackage{booktabs}
+\usepackage{spverbatim}
+\usepackage{graphicx}
+\usepackage[]{xellipsis}
+\usepackage{listings}
+	\lstset{%
+		name=macrocode,
+		language=[LaTeX]TeX,
+		basicstyle=\ttfamily\small,
+		columns=,
+	}%
+\usepackage[paperheight=11in,paperwidth=8.5in,top=1in,bottom=1in,
+	right=0.25in,left=1.75in]{geometry}
+\usepackage[T1]{fontenc}
+\usepackage[typeone]{dozenal}
+\usepackage{lmodern}
+\usepackage{url}
+\usepackage[colorlinks]{hyperref}
+\usepackage{makeidx}
+\EnableCrossrefs
+\PageIndex
+\CodelineNumbered
+\RecordChanges
+\makeindex
+\makeatletter
+\def\index@prologue{\section*{Index}\markboth{Index}{Index}}
+\makeatother
+\DoNotIndex{\?,\{,\},\|,\DeclareFontFamily,\DeclareFontShape,
+	\DeclareMathAccent,\DeclareMathAlphabet,\DeclareMathDelimiter,
+	\DeclareMathSymbol,\DeclareMathVersion,\DeclareSymbolFont,\def,
+	\drmsym,\encodingdefault,\familydefault,\fontencoding,\fontfamily,
+	\fontseries,\fontshape,\hfil,\hbox,\mathalpha,\mathclose,
+	\mathopen,\mathord,\mathversion,\mp,\nabla,\nbshortroman,
+	\RedefineMRmdclxvij,\relax,\renewcomand,\RequirePackage,
+	\selectfont,\SetMathAlphabet,\SetSymbolFont,\drmsymbolredef,
+	\nodefaultfalse,\nodefaultmathfalse,\nodefaultmathtrue,\nodefaulttrue,
+	\nodefaulttextfalse,\nodefaulttexttrue,\noindent,\numexpr,
+	\acute,\addtolength\advance,\backslash,\baselineskip,
+	\char,\counterA,\counterB,\DeclareOption,\ProcessOptions,
+	\drmmathlets,\symbolsonlytrue,\if,\else,\fi,\ifnum,\fi,\ifdim,\fi,
+	\symbolsonlyfalse,\fontsize,\newif,\newcount,
+	\loop,\iter,\let,\renewcommand,\setbox,\setlength,\the,\vss,
+	\vskip,\vbox, \newlength, \newcount,\r@@t,\z@,\DeclareMathRadical,
+	\DeclareRobustCommand,\bBigg@,\@ifnextchar,\@sqrt,\@makefnmark,
+	\@thefnmark,\catcode,\active,\Q,\csname,\endcsname,\define@key,
+	\string,\@afterheading,\@afterindentfalse,\AtBeginDocument,
+	\begin,\divide,\eject,\end,\everypar,\expandafter,\fancyfoot,
+	\fancyhead,\fancyhf,\fancypagestyle,\global,\geometry,
+	\hskip,\input,\itshape,\label,\linewidth,\multiply,
+	\newcommand,\newdimen,\newgeometry,\nl@@p,\nloop,\normalsize,
+	\oddsidemargin,\pagenumbering,\pageref,\pagestyle,\paperheight,
+	\paperwidth,\parindent,\parskip,\pdfpageheight,\pdfpagewidth,
+	\thepage,\clearpage,\ ,\@setfontsize,\@viiipt,\@viipt,\@vipt,
+	\@vpt,\@xiipt,\@xivpt,\@xviipt,\@xxpt,\@xxvpt,\tiny,\huge,
+	\Huge,\LARGE,\Large,\large,\scriptsize}
+
+\long\def\example#1#2{%
+	\bigskip%
+	\hrule%
+	\hbox to\linewidth{%
+		\hbox to0.5\linewidth{%
+			\vbox to2in{\vfil#1\vfil}%
+		}\hbox to0.5\linewidth{%
+			\vbox to2in{\vfil#2\vfil}%
+		}%
+	}%
+	\hrule%
+	\bigskip%
+}
+
+\tracingmacros=3 \begin{document} \DocInput{yaletter.dtx}
+\end{document}
+%</driver> \fi
+%
+% \title{The |yaletter| Class, v1.1}
+% \author{Donald P.\ Goodman III}
+% \date{\today}
+%
+% \maketitle
+%
+% \begin{abstract}
+% \noindent
+% The |yaletter| (``Yet Another Letter'') class produces
+% letters in a variety of preset, but also any arbitrary,
+% formats; handles multiple addresses and letterheads,
+% including a ``database'' of each; produces envelopes of
+% any size; and produces labels of any size (e.g., label
+% sheets).
+% \end{abstract}
+%
+% \section{Introduction}
+%
+% While it may seem archaic in our days of email and other
+% electronic communication, sometimes it remains necessary
+% to send a simple letter; and sometimes, even electronic
+% messages require a nicely-formatted letter with real
+% letterhead.  Yet despite the presence of multiple
+% high-quality letter-writing projects, \LaTeX\ seems
+% curiously faulty in this regard.  An American letter is a
+% very direct thing formatted in a very specific and
+% well-defined way, yet despite many attempts I've been
+% unable to persuade \LaTeX\ to produce properly spaced and
+% styled American-style letters.  It's often a minor
+% problem---a rule that I can't get rid of, or excessive
+% spacing---but it's a problem that simply ruins the
+% appearance of the letter in my judgement.
+%
+% So here's the |yaletter| class, or the ``yet another''
+% letter class.  There are plenty of letter classes, of
+% course, but I still think this one fills a gap that just
+% wasn't filled before.
+%
+% This document is typeset in accordance with the \LaTeX\
+% \textsc{docstrip} utility, which allows the extraction of
+% code and documentation from the same source documentation.
+%
+% The numbering in this document is in \emph{dozenal}; that
+% is, numbering goes 1, 2, 3, 4, 5, 6, 7, 8, 9, \x, \e, 10,
+% 11\ldots\  It uses the |dozenal| \LaTeX\ package to make
+% this happen.  For more information, visit
+% \url{http://www.dozenal.org}.
+%
+% The package \emph{does not} work with anything but
+% |pdftex|; it uses a few |pdftex| primitives internally.  I
+% didn't think it was worth the effort to make it generic.
+%
+% \section{Letter Commands}
+% \label{sect:actletcomm}
+%
+% To begin with, we need to be able to specify actual letter
+% commands; that is, commands which create the date, the
+% inside address, the salutation, the farewell, the
+% signature, and the enclosure line.  Some of these may be
+% absent in a particular letter, but a letter document class
+% must account for all of them.
+%
+% These commands will all be defined if you begin your
+% document with the following:
+%
+% \begin{quote}
+% |\documentclass{yaletter}|
+% \end{quote}
+%
+% Once you do this, you've got |yaletter| to work with.
+%
+% |yaletter| does depend on |textpos| (for envelopes and
+% labels) and |xkeyval| (for the arguments to
+% |\yaoptions|), as well as on |geometry| and |fancyhdr|
+% (for the purposes one would expect).  If these are not
+% installed, go ahead and install them; otherwise |yaletter|
+% can't do its work.
+%
+% \subsection{Parts of a Letter}
+% \label{sub:partsletter}
+%
+% It is important to understand the parts of a normal
+% business letter if you are going to use the |yaletter|
+% class, so let's go over those very briefly first.
+%
+% \begin{figure}[htb]
+% \centering
+% \includegraphics[scale=0.5]{parts_letter_diagram.png}
+% \caption{Parts of a Basic American Letter, Labelled}
+% \label{fig:parts}
+% \end{figure}
+%
+% Figure \ref{fig:parts} should be pretty self-explanatory,
+% so we won't spend time talking about it.  These are the
+% parts of a letter that we'll be discussing, though, and
+% this is (mostly) the default appearance of an opening page
+% in |yaletter| (\textit{mutatis mutandis}, of course; e.g.,
+% you'll almost certainly have a different letterhead).
+%
+% \subsection{Date Commands}
+% \label{sub:dates}
+% 
+% \DescribeMacro{\yadate}|\yadate| takes a single argument,
+% which is the date that you want to be printed.  It is
+% indented from the left margin by the length
+% \DescribeMacro{\yahdateskip}|\yahdateskip|, which can be
+% set in either the plain-\TeX\ length-setting way (e.g.,
+% |\yahdateskip=3in|) or the \LaTeX\ way (e.g.,
+% |\setlength{\yahdateskip}{3in}|).
+%
+% The space above and below dates are set by |\ya@predate|
+% and |\ya@postdate|, but as the |@| in the names suggest,
+% these really shouldn't be set in the document itself.
+% These should be consistent across all letters of a given
+% type, so preferably they should be set in the |\yaoptions|
+% command, as explained in Section \ref{sect:pageopts}.
+%
+% You can style your date arbitrarily by putting your style
+% commands into the macro
+% \DescribeMacro{\yadatestyle}|\yadatestyle|.
+% |\yadatestyle| is expanded right before the date itself.
+% Remember that you need to use font-changing commands, not
+% environments, for this; e.g., use |\itshape|, not
+% |\textit|.
+%
+% \subsection{Inside Adress}
+% \label{sub:insideaddr}
+%
+% The ``inside address'' is the address of the addressee; it
+% is so called because it appears inside the letter, as
+% opposed to on the envelope, where it also appears.  The
+% macro \DescribeMacro{\yainsideaddr}|\yainsideaddr| takes a
+% single argument, which is the inside address you want to
+% be typeset.
+%
+% The argument of |\yainsideaddr| will be typeset
+% left-justified in a box which will be indented by the
+% value of
+% \DescribeMacro{\yahinsideaddrskip}|\yahinsideaddrskip|.
+% Like |\yahdateskip|, this can be adjusted in either plain
+% \TeX\ or \LaTeX\ fashion.
+%
+% You can insert style commands for your inside address
+% using the
+% \DescribeMacro{\yainsideaddrstyle}|\yainsideaddrstyle|
+% macro, which takes one argument, which is the style
+% commands you desire.  This is subject to the same
+% restrictions as |\yadatestyle|.
+%
+% The space above and below the inside address is governed
+% by |\ya@preinsideaddr| and |\ya@postinsideaddr|; however,
+% as the |@| indicates, these should not be adjusted
+% internally.  Rather, they should be set using the
+% |\yaoptions| command discussed in Section \ref{sect:pageopts}.
+%
+% A typical inside address would probably look something
+% like this:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\yainsideaddr{Great Company Name \\ 1234 Otherplace Road \\ 
+	Somewhere, OK  00000}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% It's also possible (and often easier) to use addresses
+% defined by the |\defineaddress| command, as explained in
+% Section \ref{sect:addresses}.
+%
+% \subsection{Salutation}
+% \label{sub:salutation}
+%
+% The salutation, typically just ``Dear So-and-so,'' is
+% produced by the command
+% \DescribeMacro{\yasalutation}|\yasalutation|.  This also
+% takes a single argument, the name which you'd like to
+% salute.  E.g., running |\yasalutation{Mr.~Anderson}| will
+% produce the string, ``Dear Mr.\ Anderson:'' (by default).
+%
+% It doesn't have to use the word ``Dear,'' or to use a
+% colon after the name.  The word used in the salutation is
+% inserted by the macro |\ya@saluword|, and the punctuation
+% by |\ya@salupunct|.  The spaces above and below the
+% salutation are produced by |\ya@presalutation| and
+% |\ya@postsalutation|.  All of these, as the |@| sign
+% indicates, should not be set in the body of the document;
+% rather, they should be set using the |\yaoptions| command
+% discussed in Section \ref{sect:pageopts}.
+%
+% The salutation will be indented from the left by the
+% distance |\yahsalutationskip|, which can be set in either
+% the plain \TeX\ or \LaTeX\ ways.
+%
+% The styling of the salutation is governed by
+% \DescribeMacro{\yasalutationstyle}|\yasalutationstyle|,
+% which is subject to the same limitations as the other
+% style commands.
+%
+% \subsection{Farewell, Signature, and Enclosure}
+% \label{sub:faresigs}
+%
+% We treat these three together, since they always go
+% together.  Insert the farewell with
+% \DescribeMacro{\yafarewell}|\yafarewell|, which is
+% indented from the left margin by the value of
+% \DescribeMacro{\yahfarewellskip}|\yahfarewellskip|.  The
+% spacing above and below the farewell are governed by
+% |\ya@prefarewell| and |\ya@postfarewell|, but these should
+% be set using the |\yaoptions| command discussed in Section
+% \ref{sect:pageopts}.
+%
+% By default, this produces the string ``Sincerely,'' but it
+% need not use that word or that punctuation.
+% |\ya@farewellword| and |\ya@farewellpunct| set each of
+% these; however, these should also 
+% be set using the |\yaoptions| command discussed in Section
+% \ref{sect:pageopts}.
+%
+% The farewell can be styled with
+% \DescribeMacro{\yafarewellstyle}|\yafarewellstyle|, which
+% is subject to the same restrictions as the similar
+% commands for other parts of the letter.
+%
+% The signature is given by
+% \DescribeMacro{\yasignature}|\yasignature|, which produces
+% the value of the macro |\ya@signatureword|, typically set
+% in the |\yaoptions| command discussed in Section
+% \ref{sect:pageopts}.  Similarly, the space above and below
+% the signature is governed by |\ya@presignature| and
+% |\ya@postsignature|.  The signature is indented by the
+% value of
+% \DescribeMacro{\yahsignatureskip}|\yahsignatureskip|,
+% which can be set in the usual ways.  It is styled by
+% \DescribeMacro{\yasignaturestyle}|\yasignaturestyle|,
+% subject to the usual restrictions.
+%
+% The enclosure is included by issuing
+% \DescribeMacro{\yaenclosure}|\yaenclosure|.  This produces
+% the value of |\ya@enclosureword|, indented by the value of
+% \DescribeMacro{\yahenclosureskip}|\yahenclosureskip|,
+% styled according to the value of
+% \DescribeMacro{\yaenclosurestyle}|\yaenclosurestyle|.  The
+% space above and below it is governed by |\ya@preenclosure|
+% and |\ya@postenclosure|.   As usual, commands containing
+% |@| should be changed using the |\yaoptions| command
+% discussed in Section \ref{sect:pageopts}.
+%
+% \section{Letter Options}
+% \label{sect:pageopts}
+%
+% Letters simply don't follow the same rules as other typset
+% documents.  I've never seen a letter, for example, that
+% had two-sided formatting.  (Except, of course, for
+% so-called ``open letters,'' but these are really just
+% articles or books addressed at a particular person, so
+% they're not really our use case here.)  Margins are
+% typically much smaller than in other typeset works,
+% leading to a much larger typeblock.  Headers and footers
+% typically \emph{do} contain rules (lines), often with not
+% only the current page number but also the total number of
+% pages (e.g., ``Page 2 of 4'').  
+%
+% So |yaletter| has the command
+% \DescribeMacro{\yaoptions}|\yaoptions|, which gives the
+% user the ability to set a variety of different dimensions
+% within the letter.  It includes |fancyhdr| by itself,
+% since the standard \LaTeX\ header styles simply don't
+% address the needs of letter-writing.  And |\yaoptions|
+% allows one to set many of the dimensions that |fancyhdr|
+% requires, so that we can keep these things as far as
+% possible in just one place.
+%
+% |\yaoptions| takes a single argument, which is a list of
+% key-value assignments.  In the table below, you'll
+% find a table showing the |\yaoptions| keys, along with
+% their default values and a brief description of what
+% they're for.
+%
+% By ``key-value'' options, I mean that they are assigned by
+% the means of the phrase \emph{key = value}.  For example,
+% for a default |yaletter| on half-letter paper, do the
+% following:
+%
+% \begin{quote}
+% |\yaoptions{pageheight=8in,pagewidth=5.5in}|
+% \end{quote}
+%
+% All the options here can be set in the same way.
+%
+% You \emph{can} have multiple |\yaoptions| commands;
+% options specified in later ones will override any
+% conflicting options in earlier ones.  Therefore, you can
+% have options set in a file which you include, then
+% override some of them after inputting that file to reset
+% some of them.
+%
+% \begin{center}
+% \begin{longtable}{llp{0.5\textwidth}}
+% \toprule
+% Option & Default & Description \\
+% \midrule
+% |pageheight| & 11in & The height of the paper \\
+% |pagewidth| & 8.5in & The width of the paper \\
+% |lftmarg| & 0.5in & The left margin of the letter \\
+% |rgtmarg| & 0.5in & The right margin of the letter \\
+% |topmarg| & 0.5in & The top margin of the letter \\
+% |botmarg| & 1.0in & The bottom margin of the letter \\
+% |footskip| & 24pt & The distance bettween the bottom of
+%		the typeblock and the bottom of the footer \\
+% |headsep| & 12pt& The distance between the bottom of the
+%		header and the top of the typeblock \\
+% |headheight| & 12pt & The height of the header line \\
+% |headwidth| & |\textwidth| & The width of the header and footer
+%		lines \\
+% |headrulewidth| & 0.4pt & The thickness of the line underneath
+%		the header \\
+% |footrulewidth| & 0.4pt & The thickness of the line above
+%		the footer \\
+% |predate| & 24pt & The space between the letterhead (if
+%		any) and the date \\
+% |postdate| & 12pt & The space after the date \\
+% |datehskip| & 0pt & The horizontal space prior to the date \\
+% |preinsideaddr| & 12pt & The space inserted before the
+%		inside address \\
+% |postinsideaddr| & 0pt & The space inserted after the
+%		inside address \\
+% |insideaddrhskip| & 0pt & The horizontal space inserted
+%		prior to the inside address \\
+% |presalutation| & 0pt & The space inserted before the
+%		salutation \\
+% |postsalutation| & 0pt & The space inserted after the
+%		salutation \\
+% |saluword| & Dear & The word used in the salutation; don't
+%		forgot to include a space at the end, if you change this \\
+% |salupunct| & : & The punctuation used after the salutation \\
+% |saluskip| & 0pt & The horizontal spacing prior to the
+%		salutation \\
+% |prefarewell| & 0pt & The space inserted before the
+%		farewell line (e.g., ``Sincerely,'') \\
+% |postfarewell| & 12pt & The space inserted after the
+%		farewell line (e.g., ``Sincerely,'') \\
+% |farewellskip| & 0pt & The horizontal space inserted prior
+%		to the salutation \\
+% |farewellword| & Sincerely & The word used in the farewell
+%		line \\
+% |farewellpunct| & , & The punctuation used after the
+%		farewell word \\
+% |presignature| & 12pt & The space inserted before the
+%		signature line \\
+% |postsignature| & 0pt & The space inserted after the
+%		signature line \\
+% |signatureskip| & 0pt & The horizontal space inserted
+%		prior to the signature \\
+% |signatureword| & Your Name Here & The content of the
+%		signature; typically the name of the letter writer \\
+% |preenclosure| & 0pt & The space inserted before the
+%		enclosure line \\
+% |postenclosure| & 0pt & The space inserted after the
+%		enclosure line \\
+% |enclosureskip| & 0pt & The horiziontal space inserted
+%		prior to the enclosure line \\
+% |enclosureword| & Enclosure & The word inserted when there
+%		are enclosures \\
+% |parskip| & 12pt & The space between paragraphs \\
+% |parindent| & 0pt & The indentation of the first line of
+%		each paragraph \\
+% |datafile| & \emph{None} & The file which |yaletter| will read to
+%		get your letter data \\
+% \bottomrule
+% \end{longtable}
+% \end{center}
+%
+% If you put a suitable |\yaoptions| directive in your data
+% file, you need only tell |yaletter| where your data file
+% is located by saying 
+% |\yaoptions{datafile={yourdatafile}}|, and you'll have
+% consistently formatted letters.
+%
+% Some of these defaults may seem curiously small; remember
+% that these values \emph{stack}.  That is, |postdate| and
+% |preinsideaddr| are \emph{both} skipped in between the
+% date and the inside address.  If there is a parskip, that
+% space will be added, too.  So keep these things in mind
+% if the spacing seems larger than you expected.  The
+% default settings are suitable for a block-formatted
+% letter.
+%
+% The idea behind putting so many different settings in a
+% single command is that you can easily run many different
+% letters with a consistent look and feel, but by including
+% that one command.  However, sometimes you may need to
+% change some individual parts of these; e.g., maybe you
+% want the name in the signature line to change.  That's
+% certainly doable, as we saw in Section
+% \ref{sect:actletcomm}.
+%
+% \section{Letterheads}
+% \label{sect:letterheads}
+%
+% This is an important part of any letter package; you want
+% to be able to use nice-looking, fancy letterhead without
+% having to (a) buy paper pre-printed with it, or (b)
+% hand-code or hand-copy the letterhead into each
+% individual document.
+%
+% So |yaletter| allows you to save your letterheads in a
+% data file (probably kept in your |.texlive| directory or
+% some similar place).  You can access those letterheads by
+% name, by prefixing |\letterhead| to them.
+%
+% The \DescribeMacro{\defineletterhead}|\defineletterhead|
+% macro takes two arguments:  the first is the name of the
+% letterhead, the second is the letterhead code itself.
+% That code can be of arbitrary complexity (though it's
+% probably best to enclose it all in a box to prevent any
+% settings you use leaking out into the remainder of the
+% document), but we'll use something pretty simple for our
+% example here.  Let's say you want the following code for
+% your letterhead:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\vbox{%
+	\hbox to\linewidth{%
+		\fontsize{72pt}{72pt}\selectfont%
+		Your Name\hfil%
+	}\hbox to\linewidth{%
+		\vrule width\textwidth depth1.5pt%
+	}
+}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% You want to call this letterhead |namehead|.  You can tell
+% |yaletter| that this is your letterhead and that it's
+% called |namehead| by doing this:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\defineletterhead{namehead}{%
+	\vbox{%
+		\hbox to\linewidth{%
+			\fontsize{72pt}{72pt}\selectfont%
+			Your Name\hfil%
+		}\hbox to\linewidth{%
+			\vrule width\textwidth depth1.5pt%
+		}
+	}
+}%
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% You then actually use this letterhead by calling
+% \DescribeMacro{\letterheadNAME}|\letterheadNAME|,
+% replacing the string ``NAME'' with the name you assigned
+% your letterhead earlier.  In this case, by calling
+% |\letterheadnamehead|.
+%
+% You can also use a letterhead via the
+% \DescribeMacro{\yauseletterhead}|\yauseletterhead|
+% command, which takes a single argument:  the name assigned
+% to the letterhead in the |\defineletterhead| command.  So
+% the letterhead we defined as |namehead| can be put into
+% the letter with |\yauseletterhead{namehead}|.
+%
+% So |\yauseletterhead{namehead}| and |\letterheadnamehead|
+% are identical in their effect.
+%
+% This system allows you to maintain as many letterheads as
+% you want, and to easily insert them into a letter, by name,
+% with the inclusion of merely a single line.
+%
+% Although we've not done so here, it's a good idea to keep
+% your letterhead names in all-caps, or something similarly
+% distinctive.
+%
+% \section{Letter Styles}
+% \label{sect:letstyles}
+%
+% In American usage, there are primarily two styles of
+% letter:  ``block'' and ``modified block.''  Block letters
+% are universally left-aligned, with a blank space between
+% paragraphs and no indentation.  Modified block letters are
+% left-aligned, with a blank space between paragraphs and no
+% indentation, but with the date, saluation, farewell, and
+% signature lines indented to halfway across the page.
+%
+% |yaletter| adds a ``normal'' style, in which paragraphs
+% are typeset as normal; that is, with no space between them
+% (other than normal glue) and indentation at the beginning,
+% but otherwise identical to modified block style.
+%
+% Block format is the default for |yaletter|, as it's the
+% most common in the United States.  To explicitly request
+% block format, issue
+% \DescribeMacro{\yaletterblock}|\yaletterblock| in your
+% preamble.  To get modified block format, issue
+% \DescribeMacro{\yalettermodblock}|\yalettermodblock| in
+% your preamble.  To get normal format, issue
+% \DescribeMacro{\yaletternormal}|\yaletternormal| in your
+% preamble.
+%
+% The actual space between paragraphs is governed by the
+% special length \DescribeMacro{\yaparskip}|\yaparskip|.  To
+% change this, use |\setlength{\yaparskip}{2em}| (or
+% whatever your desired length is).  This defaults to |12pt|.
+%
+% The actual indentation for paragraphs is governed by the
+% special length \DescribeMacro{\yaparindent}|\yaparindent|.
+% To change this, use |\setlength{\yaparindent}{24pt}| (or
+% whatever your desired length is).  This defaults to |0pt|.
+%
+% These parameters mean that you have complete control over
+% indentation and paragraph skipping, even after specifying
+% a particular format (with |\yaletterblock|, for example).
+% Issuing |\yaparskip=24pt| and |\yaparindent=24pt| will
+% give you the desired paragraph skip and indentation within
+% the normal block format.
+%
+% The only trick here is to remember that, if you're using
+% |\yaletternormal| and you want a non-zero |\parskip|, you
+% have to set |\yaparskip| \emph{after} your
+% |\begin{document}|.  I'm not really sure why you'd ever
+% want to do this, but you know your needs better than I do,
+% so I wanted it to be an option.
+%
+% Further note that these are merely convenience commands;
+% you can do everything these letter styles do simply by
+% adjusting the parameters in |\yaoptions|.  These little
+% macros are merely syntactic sugar.
+%
+% \section{Headers and Footers}
+% \label{sect:headfoot}
+%
+% It makes sense for letters to have very distinctive
+% headers and footers, especially since there is usually no
+% indentation beginning paragraphs.  Since paragraph breaks
+% are marked only by spacing, when such a break falls at the
+% end of a page, it may be hard to tell without a clearly
+% marked footer.  But there should not be a header on the
+% first page, which has plenty of information already
+% included, possibly including a letterhead, to make it very
+% clear to the reader what he is looking at.
+%
+% So |yaletter| includes |fancyhdr|, since it will be needed
+% for almost anything.  It furthermore resets both
+% |\headrulewidth| and |\footrulewidth| to |0.4pt|, since
+% these are both very helpful guides when reading a letter's
+% text.  (Note that both of these can be changed, if
+% desired, in |\yaoptions|.)
+%
+% On the first page, the page style is automatically set as
+% |yafirstpage|.  |yafirstpage| is defined as follows:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\fancypagestyle{yafirstpage}{%
+	\renewcommand\headrulewidth{0pt}
+	\renewcommand\footrulewidth{0.4pt}
+	\fancyhf{}%
+	\fancyfoot[C]{Page \thepage\ of \yalastpage}%
+}%
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% If you want the first page footer to be different,
+% redefine |yafirstpage| with whatever parameters you would
+% like.
+%
+% Headers on subsequent pages are defined by the page style
+% |yaotherpage|:
+% 
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\fancypagestyle{yaotherpage}{%
+	\renewcommand\headrulewidth{0.4pt}
+	\renewcommand\footrulewidth{0.4pt}
+	\fancyhf{}%
+	\fancyhead[L]{\yawriter\ to \yaaddressee}%
+	\fancyhead[R]{\yathedate}%
+	\fancyfoot[C]{Page \thepage\ of \yalastpage}%
+}%
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% This, too, can of course be redefined to be whatever you
+% want it to be, with the usual |fancyhdr| commands.
+%
+% \section{Special Variables}
+% \label{sect:specvar}
+%
+% In Section \ref{sect:headfoot}, we saw a couple of special
+% variables used, which contain values like the addressee of
+% the letter, the author of the letter, and so forth.  We
+% can use these variables in headers and footers especially,
+% but they are useful in other places, as well.
+%
+% \DescribeMacro{\yawriter}|\yawriter| contains the author
+% of the letter.  It is set by using the macro
+% \DescribeMacro{\yasetwriter}|\yasetwriter|, and styled
+% with the contents of the macro
+% \DescribeMacro{\yawriterstyle}|\yawriterstyle|.  For
+% example, to set the letter's writer as ``John Doe'' and
+% set it in italics, run the following:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\yawriterstyle{\itshape}
+\yasetwriter{John Doe}
+\yawriter
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% Similarly, there are the macros
+% \DescribeMacro{\yasetaddressee}|\yasetaddressee|,
+% \DescribeMacro{\yaaddresseestyle}|\yaaddresseestyle|, and
+% \DescribeMacro{\yaaddressee}|\yaaddressee|.  These can be
+% used with the |\yawriter| commands to develop things like
+% the default header, which briefly states the parties to
+% the letter.
+%
+% There is also \DescribeMacro{\yathedate}|\yathedate|,
+% which holds the date which was entered in the |\yadate|
+% macro, and the \DescribeMacro{\yalastpage}|\yalastpage|,
+% which holds the page number of the last page.  (Note that
+% this isn't necessarily the last page of your whole
+% document, which might be closed by an envelope or label
+% page; rather, it's the page which contains the signature.)
+%
+% \section{Addresses}
+% \label{sect:addresses}
+%
+% It's likely that you have a list of addresses that you
+% normally send letters to, and it doesn't make sense for
+% you to have to type them every time.  So |yaletter| allows
+% you to define addresses, along with shorthands, in a
+% database of sorts and refer to them that way, as well as
+% simply entering them manually where they need to go.
+%
+% \DescribeMacro{\defineaddress}|\defineaddress| takes three
+% arguments.  The first is the name by which you want to
+% refer to the address; the second is the short name, which
+% will be inserted into the |\yaaddressee| or |\yawriter|
+% spot; and the last is the code of the address itself.  An
+% example would be the following:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\defineaddress{FIRST}{Great Company}{%
+	Great Company Name \\
+	1234 Otherplace Road \\
+	Somewhere, OK  00000%
+}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% To actual use this address, one has a number of options.
+% To use the address as the inside address, |yaletter|
+% provides the \DescribeMacro{\yatoaddress}|\yatoaddress|
+% macro, which takes the single argument of the name of the
+% address defined by |\defineaddress|.  For example:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\yainsideaddr{\yatoaddress{FIRST}}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% The |\yatoaddress| macro both typesets the address itself
+% and resets |\yaaddressee| to the short name given in
+% |\defineaddress|.
+%
+% |yaletter| also provides the similar commands
+% \DescribeMacro{\yareturnaddress}|\yareturnaddress|, which
+% both typesets the address and sets |\yawriter| to the
+% short name given in the corresponding |\defineaddress|;
+% and \DescribeMacro{\yafromaddress}|\yafromaddress|, which
+% sets |\yawriter| but does not typeset the address itself.
+%
+% Finally, \DescribeMacro{\yaaddress}|\yaaddress| just
+% typesets the address, and doesn't set any other variables.
+%
+% If you already have an address database, it is probably
+% helpful to develop a script which will convert your
+% addresses into appropriate |\defineaddress| macros.
+% Fortunately, this probably isn't very difficult.
+%
+% \section{Envelopes}
+% \label{sect:envelopes}
+%
+% |yaletter| also provides plenty of facilities for
+% typesetting envelopes.  You can use the same convenient
+% address facilities for envelopes as you can for letters.
+%
+% \DescribeMacro{\yaenvelope}|\yaenvelope| is the primary
+% macro, and it takes two arguments:  the first is the width
+% of the envelope, the second is its height.  These can be
+% given in any dimension that |pdftex| understands; likely
+% this will be inches or millimeters.  |yaletter| will
+% create this envelope at the point in the document that you
+% invoke |\yaenvelope|, so if you're doing this in the same
+% file as your letter, you should issue this after your
+% letter is complete.  It will start a new page if
+% necessary.  So, for a standard American business envelope:
+%
+% \begin{quote}
+% |\yaenvelope{9.5in}{4.125in}|
+% \end{quote}
+% 
+% You can control the placing of the return address and the
+% to address very precisely.  To select the unit you'd like
+% to use for that control, use
+% \DescribeMacro{\yaenvunit}|\yaenvunit|, which takes a
+% single argument, which is the unit you'd like to use for
+% positioning envelope elements.  I have found a tenth of an
+% inch convenient for this purpose, and that is consequently
+% the default:
+%
+% \begin{quote}
+% |\yaenvunit{0.1in}|
+% \end{quote}
+%
+% You then set the value of several count registers; those
+% count registers will be multiplied by the value of
+% |\yaenvunit| for positioning.  The registers are:
+%
+% \begin{center}
+% \begin{tabular}{lp{0.6\textwidth}c}
+% \toprule
+% Dimension & Description & Default\\
+% \midrule
+% |\yaenvrethskip| & Return address's distance from the left
+% edge of the envelope & 2 \\
+% |\yaenvretvskip| & Return address's distance from the top
+% edge of the envelope & 1 \\
+% |\yaenvtohskip| & To address's distance from the left
+% edge of the envelope & 42 \\
+% |\yaenvtovskip| & To address's distance from the top
+% edge of the envelope & 18 \\
+% \bottomrule
+% \end{tabular}
+% \end{center}
+%
+% Set these in the manner of plain-\TeX\ counts, not \LaTeX\
+% counters.  E.g.:
+%
+% \begin{quote}
+% |\yaenvtovskip=5|
+% \end{quote}
+%
+% The actual addresses to be printed are held in
+% \DescribeMacro{\yaenvtoaddr}|\yaenvtoaddr|, which holds
+% the to address; and
+% \DescribeMacro{\yaenvretaddr}|\yaenvretaddr|, which holds
+% the return address.  Redefine these before issuing your
+% |\yaenvelope| command:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\def\yaenvretaddr{%
+	Your Name \\
+	7777 Someplace Street \\
+	Nowhere, OK  00000%
+}%
+\def\yaenvtoaddr{\yaaddress{FIRST}}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% Here we have the return address entered manually, but the
+% to address entered as an address defined with
+% |\defineaddress|, using |\yaaddress|, which typesets the
+% address itself but does not set any variables.
+%
+% Because some envelope sizes are quite common, |yaletter|
+% provides them as simple commands.  The table below gives
+% these commands along with the envelope size they mimic,
+% plus the skips for each of their parts.  The unit of
+% skipping is, in all cases, |0.1in|, which you can change
+% if you need to adjust this spacing.  Changing the font
+% size to any significant degree will likely require such
+% adjustments.
+%
+% All of these commands are prefixed with |ya|; the North
+% American sizes are prefixed with |yana|.  Subsequently,
+% letters in the names are retained, while digits are made
+% lowercase roman numerals.  Finally, |envelope| is suffixed
+% to the end.  So, e.g., a C6 envelope becomes
+% |\yacvienvelope|.
+%
+% \begin{longtable}{llcccc}
+% \toprule
+% {} & {} & Ret. & Ret. & To & To \\
+% Size & Command & hskip & vskip & hskip & vskip \\
+% \midrule
+% No.\ 10 & |\business| & 2 & 1 & 42 & 18 \\
+% {} & |\yananoxenvelope| & {} & {} & {} & {} \\
+% DL & |\yadlenvelope| & 2 & 1 & 36 & 18 \\
+% C6 & |\yacvienvelope| & 2 & 1 & 26 & 20 \\
+% C6/C5 & |\yacvicvenvelope| & 2 & 1 & 42 & 18 \\
+% C5 & |\yacvenvelope| & 2 & 1 & 38 & 28 \\
+% C4 & |\yacivenvelope| & 3 & 3 & 60 & 42 \\
+% C3 & |\yaciiienvelope| & 3 & 3 & 84 & 60 \\
+% A-2 & |\yanaaiienvelope| & 2 & 1 & 22 & 20 \\
+% A-6 & |\yanaavienvelope| & 2 & 1 & 26 & 22 \\
+% A-7 & |\yanaaviienvelope| & 2 & 1 & 30 & 24 \\
+% A-8 & |\yanaaviiienvelope| & 2 & 1 & 34 & 24 \\
+% A-9 & |\yanaaixenvelope| & 2 & 1 & 38 & 28 \\
+% A-10 & |\yanaaxenvelope| & 2 & 1 & 42 & 28 \\
+% No.\ 6$\frac{3}{4}$ & |\yananovienvelope| & 2 & 1 & 26 & 14 \\
+% No.\ 7$\frac{3}{4}$ & |\yananoviienvelope| & 2 & 1 & 32 & 16 \\
+% No.\ 9 & |\yananoixenvelope| & 2 & 1 & 36 & 16 \\
+% No.\ 11 & |\yananoxienvelope| & 2 & 1 & 48 & 20 \\
+% No.\ 12 & |\yananoxiienvelope| & 2 & 1 & 48 & 22 \\
+% No.\ 14 & |\yananoxivenvelope| & 2 & 1 & 52 & 24 \\
+% \bottomrule
+% \end{longtable}
+%
+% |yaletter| can print any size of envelope; if your printer
+% can handle it, |yaletter| can make it.  The table above
+% just presents presets for a number of common situations.
+%
+% It bears repeating that all of these settings assume no
+% change in font size; however, especially for the larger
+% envelopes, you'll likely want to increase the font size.
+% You'll probably want to adjust the hskip and vskip for
+% both addresses at that time.
+%
+% \section{Labels}
+% \label{sect:labels}
+%
+% Oftentimes, however, we don't want to print on envelopes;
+% we just want to print on labels, which we can then attach
+% to envelopes (or to packages, or to whatever).  |yaletter|
+% caters to this need, too.
+%
+% The main macro is
+% \DescribeMacro{\yalabelsheet}|\yalabelsheet|, which due to
+% the nature of label sheets takes many arguments which are
+% best explained explicitly:
+% 
+% \begin{center}
+% \cmd{\yalabelsheet} \marg{page-width} \marg{page-height}
+% \marg{label-width} \marg{label-height}
+% \marg{horizontal-separation} \marg{vertical-separation}
+% \marg{number-across} \marg{number-down}
+% \end{center}
+%
+% That's \emph{eight} mandatory arguments.  Unfortunately,
+% this seems unavoidable; we can't assume that labels are
+% evenly spaced on the sheet, nor can we assume that labels
+% are sensibly divided on the page.  The macro does assume
+% that they are arranged in rows and columns; that is all.
+%
+% The first six arguments are all lengths, and can be given
+% in any unit that \TeX\ understands.  The last two are
+% simply integers; so for a sheet of labels grouped in ten
+% rows of three, one simply enters |{3}{10}|.
+%
+% Even these eight parameters are not sufficient, however,
+% because we can't assume that the margins of the label
+% sheet are the same as the gaps between the labels
+% themselves.  So because with \TeX\ we are limited to nine
+% arguments, we have separate parameters to set these
+% margins:
+%
+% \begin{center}
+% \begin{tabular}{ll}
+% \toprule
+% \multicolumn{1}{c}{Margin} & \multicolumn{1}{c}{Length} \\
+% \midrule
+% Left & |\yalableftmarg| \\
+% Right & |\yalabrightmarg| \\
+% Top & |\yalabtopmarg| \\
+% Bottom & |\yalabbotmarg| \\
+% \bottomrule
+% \end{tabular}
+% \end{center}
+%
+% Redefining \DescribeMacro{\yalabeltext}|\yalabeltext| will
+% place the contents of that macro in each of the labels on
+% the newly-created label page.  E.g.:
+%
+% \begin{quote}
+% |\def\yalabeltext{\yaaddress{FIRST}}|
+% \end{quote}
+%
+% \noindent
+% will result in the address (defined with |\defineaddress|
+% with the label |FIRST|) being typeset in all the labels of
+% the newly created label sheet.  This is very handy for
+% printing out an entire sheet of, say, return address
+% labels.  However, because often you'd like different
+% text on each label, |\yalabeltext| defaults to empty, so
+% no text will be printed onto the labels.  This means that
+% it will appear to be a completely blank page.
+%
+% You can place individual labels with the
+% \DescribeMacro{\yaplacelabel}|\yaplacelabel| command:
+%
+% \begin{center}
+% \cmd{\yaplacelabel} \marg{text} \marg{number-across}
+% \marg{number-down}
+% \end{center}
+%
+% The first argument contains the text you'd like printed on
+% the label; it consists of arbitrary \LaTeX\ code and can
+% be the result of other commands (e.g., your first argument
+% may be something like |\yaaddress{FIRST}|).  The second
+% and third tell |yaletter| which label you'd like this text
+% to go on; the second argument is the number of columns
+% across you'd like to skip, the third is the number of rows
+% down you'd like to skip.
+%
+% \emph{These are zero-indexed.}  That is, if you want to
+% typeset a label in the first label on the sheet, use
+% |{0}{0}|.  The whole first row will have a |{0}| for the
+% second argument; the whole first column will have a |{0}|
+% for the first argument.
+%
+% Note that |yaletter| does \emph{not} check if you've given
+% it coordinates for a label that actually exists; if you
+% tell |yaletter| to typeset a label in the fourth row when
+% there are only two, it will obey you, and your label will
+% be off the page.
+%
+% Each label is typeset in a box.  You can indent the box
+% from the left edge of the label by setting the length
+% \DescribeMacro{\yalabelmarg}|\yalabelmarg|, which defaults
+% to |0.1in|.
+%
+% Sometimes it's useful to see the boxes that you're
+% typesetting in, even though you don't want to print them.
+% E.g., it's easier to tell if your text fits inside the
+% label if you can see the boundaries of that label.  To
+% make these boxes visible, run
+% \DescribeMacro{\yashowboxeson}|\yashowboxeson|; to turn
+% them off again, run
+% \DescribeMacro{\yashowboxesoff}|\yashowboxesoff|.
+%
+% When you're defining a new label sheet, it's important not
+% to trust the measurements on the packaging.  For example,
+% Avery 8660 says that its labels are one inch high, but it
+% also says that they're twenty-five millimeters high;
+% obviously, one of these must be slightly off, since one
+% inch equals 25.4 millimeters.  It turns out that using
+% twenty-five millimeters works better, though a ruler
+% says that one inch is the correct measurement.  Go figure.
+%
+% |yaletter| offers two presets for label sheets:  Avery
+% 8660 and Avery 8663.  Why these two?  Because those are
+% the two that I happen to have in my drawer here!  In any
+% case, they are accessed using the
+% \DescribeMacro{\yaavery}|\yaavery| command, which takes
+% one argument:  the number of the label package.  E.g.,
+% |\yaavery{8660}| will give you a sheet of labels in size
+% Avery 8660.
+%
+% Defining new label sheets is relatively easy.  If you want
+% it to fit into this |avery| naming scheme, define it like
+% so:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\expandafter\def\csname avery????\endcsname{%
+	\yalabtopmarg=0.5in
+	\yalabbotmarg=0.5in
+	\yalableftmarg=0.1875in
+	\yalabrightmarg=0.1875in
+	\yalabelsheet{8.5in}{11in}{2.625in}{25mm}{0.125in}{0in}{3}{10}%
+}%
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% That's the setting for Avery 8660; replace |????| with the
+% number label you want, and set the appropriate dimensions.
+% Use a ruler; it's the only way to be sure.  Also, the
+% margins are typically not printed on the packaging, so
+% you'll need to get those manually anyway.  After this,
+% |\yaavery{????}| will get you a sheet with these settings.
+%
+% For some other manufacturer, or if you just don't like
+% this naming scheme, don't bother; just replace the first
+% line about with |\def\nameoflabelsheet{%|.  Then running
+% |\nameoflabelsheet| will give you a label sheet with your
+% settings.
+%
+% \section{Examples}
+% \label{sect:letexamples}
+%
+% A common need for label sheets is to print an entire sheet
+% with the same text on each label; typically this is to
+% produce a sheet of return-address labels, to be attached
+% to envelopes when they are mailed.  A minimal working
+% example to produce such a label sheet:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\documentclass{yaletter}
+\defineaddress{HOME}{John Q.\ Public}{%
+	John Q.\ Public \\
+	65 North Buffalo Terrace \\
+	Somewhere, NY  00000
+}%
+\begin{document}
+\def\yalabeltext{\yaaddress{HOME}}
+\yalabtopmarg=0.5in
+\yalabbotmarg=0.5in
+\yalableftmarg=0.1875in
+\yalabrightmarg=0.1875in
+\yashowboxeson
+\yalabelsheet{8.5in}{11in}{2.625in}{25mm}{0.125in}{0in}{3}{10}%
+\end{document}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% This will yield a sheet of return address labels (note
+% that |\yashowboxeson| was issued here, just so we can see
+% the labels bettter; for actual printing, one wouldn't want
+% this):
+%
+% \begin{center}
+% \fbox{\includegraphics[scale=0.25]{return_sheet-crop.pdf}}
+% \end{center}
+%
+% The basic types of letters are demonstrated in Figure
+% \ref{fig:basiclettypes} on page
+% \pageref{fig:basiclettypes}.  Specifically, Figure
+% \ref{fig:basiclettypes} demonstrates block, modified
+% block, and normal-style letters.
+%
+% \begin{figure}[htbp]
+% \begin{tabular}{cc}
+%	\fbox{\includegraphics[scale=0.65]{sample_block-crop.pdf}} &
+%		\fbox{\includegraphics[scale=0.65]{sample_modblock-crop.pdf}} \\
+%	\noalign{\vskip0.25em}
+% \itshape Block Style & \itshape Modified Block Style \\
+%		\noalign{\vskip1em}
+%	\fbox{\includegraphics[scale=0.65]{sample_normal-crop.pdf}} &
+%		{} \\
+% \itshape Normal Style & {} \\
+% \end{tabular}
+% \caption{Examples of the Three Basic Letter Types}
+% \label{fig:basiclettypes}
+% \end{figure}
+%
+% A standard American business envelope (No.\ 10) is easier
+% to form.  A minimal example producing such an envelope is
+% as follows:
+%
+% \iffalse
+%<*example>
+% \fi
+\begin{lstlisting}
+\documentclass{yaletter}
+\defineaddress{HOME}{John Q.\ Public}{%
+	Your Name \\
+	7777 Someplace Street \\
+	Nowhere, OK  00000%
+}%
+\def\yaenvretaddr{\yaaddress{HOME}}
+\def\yaenvtoaddr{Your Name \\ 7777 Someplace Street \\ Nowhere, OK  00000}
+\def
+\begin{document}
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=42
+\global\yaenvtovskip=18
+\yaenvelope{9.5in}{4.125in}%
+\end{document}
+\end{lstlisting}
+% \iffalse
+%</example>
+% \fi
+%
+% These are the same settings as can be obtained with
+% |\yabusiness| or |\yananoxenvelope|; they're spelled out
+% here just for demonstrative purposes.  They will result in
+% the following envelope:
+%
+% \begin{center}
+% \fbox{\includegraphics[width=\textwidth]{demon_envelope.pdf}}
+% \end{center}
+%
+% You can print this as you wish; but keep in mind that you
+% may have to rotate the page with your pdf viewer,
+% depending on what orientation your printer expects.
+%
+% \section{Implementation}
+% \label{sect:implementation}
+%
+% First, we need to require |xkeyval|, so that we can make
+% |yaoptions| work correctly without a confusing array of
+% options.
+%    \begin{macrocode}
+\RequirePackage{xkeyval}
+%    \end{macrocode}
+% Next, define the necessary options and dimensions.  Set
+% good defaults for standard \LaTeX\ dimensions.
+%    \begin{macrocode}
+\pagenumbering{arabic}
+\newdimen\ya@lftmarg\ya@lftmarg=0.5in
+\newdimen\ya@rgtmarg\ya@rgtmarg=0.5in
+\newdimen\ya@topmarg\ya@topmarg=0.5in
+\newdimen\ya@botmarg\ya@botmarg=1.0in
+\paperheight=\the\pdfpageheight
+\paperwidth=\the\pdfpagewidth
+\newdimen\ya@pageheight\ya@pageheight=\the\paperheight
+\newdimen\ya@pagewidth\ya@pagewidth=\the\paperwidth
+\marginparwidth=0pt
+\marginparpush=0pt
+\topmargin=0pt
+\headheight=12pt
+\headsep=12pt
+\footskip=24pt
+\marginparsep=0pt
+\newdimen\ya@headheight\ya@headheight=\the\headheight
+\newdimen\ya@headsep\ya@headsep=\the\headsep
+\newdimen\ya@footskip\ya@footskip=\the\footskip
+\oddsidemargin=0pt
+\newdimen\ya@oddsidemargin\ya@oddsidemargin=\the\oddsidemargin
+\newdimen\ya@headwidth\ya@headwidth=0pt
+\def\ya@headrulewidth{0.4pt}
+\def\ya@footrulewidth{0.4pt}
+\newdimen\ya@predate\ya@predate=12pt
+\newdimen\ya@postdate\ya@postdate=12pt
+\newdimen\ya@preinsideaddr\ya@preinsideaddr=12pt
+\newdimen\ya@postinsideaddr\ya@postinsideaddr=0pt
+\newdimen\ya@presalutation\ya@presalutation=0pt
+\newdimen\ya@postsalutation\ya@postsalutation=0pt
+\newdimen\ya@prefarewell\ya@prefarewell=0pt
+\newdimen\ya@postfarewell\ya@postfarewell=12pt
+\newdimen\ya@presignature\ya@presignature=12pt
+\newdimen\ya@postsignature\ya@postsignature=0pt
+\newdimen\ya@preenclosure\ya@preenclosure=0pt
+\newdimen\ya@postenclosure\ya@postenclosure=0pt
+\def\ya@saluword{Dear }
+\def\ya@salupunct{:}
+\def\ya@farewellword{Sincerely}
+\def\ya@farewellpunct{,}
+\def\ya@signatureword{Your Name Here}
+\def\ya@enclosureword{Enclosure}
+\def\yaaddressee{}
+\def\yawriter{}
+%    \end{macrocode}
+% Now we define |yaoptions| and the actual key-value pairs
+% which serve as its argument.
+%    \begin{macrocode}
+\define@key{yaoptions}{lftmarg}{\global\ya@lftmarg=#1}
+\define@key{yaoptions}{rgtmarg}{\global\ya@rgtmarg=#1}
+\define@key{yaoptions}{topmarg}{\global\ya@topmarg=#1}
+\define@key{yaoptions}{botmarg}{\global\ya@botmarg=#1}
+\define@key{yaoptions}{pageheight}{\global\ya@pageheight=#1}
+\define@key{yaoptions}{pagewidth}{\global\ya@pagewidth=#1}
+\define@key{yaoptions}{footskip}{\global\ya@footskip=#1}
+\define@key{yaoptions}{headsep}{\global\ya@headsep=#1}
+\define@key{yaoptions}{headheight}{\global\ya@headheight=#1}
+\define@key{yaoptions}{oddsidemargin}{\global\ya@oddsidemargin=#1}
+\define@key{yaoptions}{headwidth}{\global\ya@headwidth=#1}
+\define@key{yaoptions}{headrulewidth}{\global\def\ya@headrulewidth{#1}}
+\define@key{yaoptions}{footrulewidth}{\global\def\ya@footrulewidth{#1}}
+\define@key{yaoptions}{predate}{\global\ya@predate=#1}
+\define@key{yaoptions}{postdate}{\global\ya@postdate=#1}
+\define@key{yaoptions}{preinsideaddr}{\global\ya@preinsideaddr=#1}
+\define@key{yaoptions}{postinsideaddr}{\global\ya@postinsideaddr=#1}
+\define@key{yaoptions}{presalutation}{\global\ya@presalutation=#1}
+\define@key{yaoptions}{postsalutation}{\global\ya@postsalutation=#1}
+\define@key{yaoptions}{prefarewell}{\global\ya@prefarewell=#1}
+\define@key{yaoptions}{postfarewell}{\global\ya@postfarewell=#1}
+\define@key{yaoptions}{presignature}{\global\ya@presignature=#1}
+\define@key{yaoptions}{postsignature}{\global\ya@postsignature=#1}
+\define@key{yaoptions}{preenclosure}{\global\ya@preenclosure=#1}
+\define@key{yaoptions}{postenclosure}{\global\ya@postenclosure=#1}
+\define@key{yaoptions}{datehskip}{\global\yahdateskip=#1}
+\define@key{yaoptions}{insideaddrhskip}{\global\yahinsideaddrskip=#1}
+\define@key{yaoptions}{saluskip}{\global\yahsalutationskip=#1}
+\define@key{yaoptions}{farewellskip}{\global\yahfarewellskip=#1}
+\define@key{yaoptions}{signatureskip}{\global\yahsignatureskip=#1}
+\define@key{yaoptions}{enclosureskip}{\global\yahenclosureskip=#1}
+\define@key{yaoptions}{enclosureword}{\global\def\ya@enclosureword{#1}}
+\define@key{yaoptions}{saluword}{\global\def\ya@saluword{#1}}
+\define@key{yaoptions}{salupunct}{\global\def\ya@salupunct{#1}}
+\define@key{yaoptions}{farewellword}{\global\def\ya@farewellword{#1}}
+\define@key{yaoptions}{farewellpunct}{\global\def\ya@farewellpunct{#1}}
+\define@key{yaoptions}{signatureword}{\global\def\ya@signatureword{#1}}
+\define@key{yaoptions}{signatureword}{\global\def\ya@signatureword{#1}}
+\define@key{yaoptions}{addressee}{\yasetaddressee{#1}}
+\define@key{yaoptions}{writer}{\yasetwriter{#1}}
+\define@key{yaoptions}{parskip}{\global\yaparskip=#1}
+\define@key{yaoptions}{parindent}{\global\yaparindent=#1}
+\define@key{yaoptions}{datafile}{\global\input{#1}}
+\newcommand\yaoptions[1]{%
+	\setkeys{yaoptions}{#1}%
+	\geometry{top=\the\ya@topmarg,bottom=\the\ya@botmarg,
+		left=\the\ya@lftmarg,right=\the\ya@rgtmarg,
+		paperheight=\the\ya@pageheight,paperwidth=\the\ya@pagewidth,
+		footskip=\the\ya@footskip,headsep=\the\ya@headsep,
+		headheight=\the\ya@headheight}
+	\ifdim\ya@headwidth=0pt
+		\global\headwidth=\the\textwidth
+	\else
+		\global\headwidth=\the\ya@headwidth
+	\fi
+	\renewcommand{\headrulewidth}{\ya@headrulewidth}
+	\renewcommand{\footrulewidth}{\ya@footrulewidth}
+}%
+%    \end{macrocode}
+% Set |\normalsize| so that \LaTeX\ doesn't complain.  While
+% we're at it, set all the default \LaTeX\ font sizes, since
+% people are often accustomed to using them.
+%    \begin{macrocode}
+\renewcommand{\normalsize}{\fontsize{10pt}{12pt}\selectfont}
+\newcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt}
+\newcommand\tiny{\@setfontsize\tiny\@vpt\@vipt}
+\newcommand\large{\@setfontsize\large\@xiipt{14}}
+\newcommand\Large{\@setfontsize\Large\@xivpt{18}}
+\newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
+\newcommand\huge{\@setfontsize\huge\@xxpt{25}}
+\newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
+%    \end{macrocode}
+% Now we need to set some basic page dimensions so that
+% |geometry| doesn't complain.  We just start with the
+% default page dimensions of the system, getting them from
+% pdf\TeX; it doesn't really matter, since |geometry| will
+% set the actual dimensions later.
+%    \begin{macrocode}
+\paperheight=\the\pdfpageheight
+\paperwidth=\the\pdfpagewidth
+%    \end{macrocode}
+% Now we add the necessary package:  |geometry| and
+% |fancyhdr|.
+%    \begin{macrocode}
+\RequirePackage{geometry}
+\RequirePackage{fancyhdr}
+%    \end{macrocode}
+% Now define the default page styles.  The first,
+% |yafirstpage|, obviously is used for the first page of the
+% letter; the other, |yaotherpage|, is used for all other
+% pages.
+%    \begin{macrocode}
+\fancypagestyle{yafirstpage}{%
+	\renewcommand\headrulewidth{0pt}
+	\renewcommand\footrulewidth{0.4pt}
+	\fancyhf{}%
+	\fancyfoot[C]{Page \thepage\ of \yalastpage}%
+}%
+\fancypagestyle{yaotherpage}{%
+	\renewcommand\headrulewidth{0.4pt}
+	\renewcommand\footrulewidth{0.4pt}
+	\fancyhf{}%
+	\fancyhead[L]{\yawriter\ to \yaaddressee}%
+	\fancyhead[R]{\yathedate}%
+	\fancyfoot[C]{Page \thepage\ of \yalastpage}%
+}%
+\fancypagestyle{yaenvpage}{%
+	\renewcommand\headrulewidth{0pt}
+	\renewcommand\footrulewidth{0pt}
+	\fancyhf{}%
+	\newgeometry{margin=0pt}
+}%
+%    \end{macrocode}
+% Now let's define the letterhead code.  Each letterhead is
+% defined by |\defineletterhead|, which takes two arguments:
+% the first is the name of the letterhead, which will be
+% appended to another command of the form
+% |\letterheadNAME|; and the second is the actual letterhead
+% code itself.
+%    \begin{macrocode}
+\def\defineletterhead#1#2{%
+	\global\expandafter\def\csname letterhead#1\endcsname{%
+		\hbox{#2}%
+	}%
+	\vskip1pt
+	\@afterindentfalse\@afterheading
+}%
+%    \end{macrocode}
+% We also define |\yauseletterhead|, which takes as its
+% single argument the name of the letterhead as given in a
+% |\defineletterhead| command.
+%    \begin{macrocode}
+\def\yauseletterhead#1{%
+	\csname letterhead#1\endcsname%
+}%
+%    \end{macrocode}
+% Define the basic letter types with |\ya@lettertype|; 0 is
+% block, 1 is modified block, and 2 is ``normal.''
+%    \begin{macrocode}
+\newcount\ya@lettertype\ya@lettertype=0
+%    \end{macrocode}
+% Now define some of the basic lengths; these are all
+% user-accessible (that is, they don't contain ``|@|'').
+% They deal with paragraph spacing and indentation.
+%    \begin{macrocode}
+\newdimen\yaparskip\yaparskip=12pt
+\newdimen\yaparindent\yaparindent=0pt
+\newdimen\yahdateskip\yahdateskip=0pt
+\newdimen\yahinsideaddrskip\yahinsideaddrskip=0pt
+\newdimen\yahsalutationskip\yahsalutationskip=0pt
+\newdimen\yahfarewellskip\yahfarewellskip=0pt
+\newdimen\yahsignatureskip\yahsignatureskip=0pt
+\newdimen\yahenclosureskip\yahenclosureskip=0pt
+%    \end{macrocode}
+% Define the letter types.  These really simply redefine a
+% few variables, and can be duplicated entirely with the
+% |\yaoptions| command, but these command provide a little
+% syntactic sugar.
+%    \begin{macrocode}
+\def\yaletterblock{%
+	\everypar={%
+		\parindent=\the\yaparindent
+		\parskip=\the\yaparskip
+	}%
+}%
+\def\yalettermodblock{%
+	\everypar={%
+		\parindent=\the\yaparindent
+		\parskip=\the\yaparskip
+	}%
+	\yahdateskip=\textwidth%
+	\divide\yahdateskip by2%
+	\yahfarewellskip=\textwidth%
+	\divide\yahfarewellskip by 2%
+	\yahsignatureskip=\textwidth%
+	\divide\yahsignatureskip by 2%
+	\ya@lettertype=1
+}%
+\def\yaletternormal{%
+	\yaparskip=0pt
+	\yaparindent=24pt
+	\everypar={%
+		\parindent=\the\yaparindent
+		\parskip=\the\yaparskip
+	}%
+	\yahdateskip=\textwidth%
+	\divide\yahdateskip by2%
+	\yahfarewellskip=\textwidth%
+	\divide\yahfarewellskip by2%
+	\yahsignatureskip=\textwidth%
+	\divide\yahsignatureskip by2%
+	\ya@lettertype=2
+	\ya@preinsideaddr=24pt%
+	\ya@presalutation=12pt%
+	\ya@postsalutation=12pt%
+	\ya@prefarewell=12pt%
+}
+%    \end{macrocode}
+% Now we define some of the actual letter macros.  These put
+% in things like dates, inside addresses, salutations, and
+% so forth.  We use our space parameters, defined above, to
+% make sure they all get put in the right places.
+%    \begin{macrocode}
+\def\yadatestyle{}
+\def\yadate#1{%
+	\vskip\ya@predate%
+	\noindent\hskip\yahdateskip\hbox{%
+		\yadatestyle #1%
+		\hfil%
+	}%
+	\vskip\ya@postdate%
+	\global\def\yathedate{#1}%
+}%
+\def\yainsideaddrstyle{}
+\def\yainsideaddr#1{%
+	\vskip\ya@preinsideaddr%
+	\noindent\hskip\yahinsideaddrskip\hbox{%
+		\vbox{\yainsideaddrstyle\noindent #1}
+	}
+	\vskip\ya@postinsideaddr%
+}%
+\def\yasalutationstyle{}
+\def\yasalutation#1{%
+	\vskip\ya@presalutation%
+	\noindent\hskip\yahsalutationskip\hbox{%
+		\yasalutationstyle%
+		\ya@saluword #1\ya@salupunct\hfil%
+	}%
+	\vskip\ya@postsalutation%
+}%
+\def\yafarewellstyle{}
+\def\yafarewell{%
+	\vskip\ya@prefarewell%
+	\noindent\hskip\yahfarewellskip\hbox{%
+		\yafarewellstyle%
+		\ya@farewellword\ya@farewellpunct\hfil%
+	}%
+	\vskip\ya@postfarewell%
+}%
+\def\yasignaturestyle{}
+\def\yasignature{%
+	\vskip\ya@presignature%
+	\noindent\hskip\yahsignatureskip\hbox{%
+		\yasignaturestyle%
+		\ya@signatureword\hfil%
+	}%
+	\vskip\ya@postsignature%
+	\label{thelast}%
+}%
+\def\yaenclosurestyle{}
+\def\yaenclosure{%
+	\vskip\ya@preenclosure%
+	\noindent\hskip\yahenclosureskip\hbox to\linewidth{%
+		\yaenclosurestyle%
+		\ya@enclosureword\hfil%
+	}%
+	\vskip\ya@postenclosure%
+}%
+%    \end{macrocode}
+% Now we need to include some code for the headers and
+% footers.  These are basically simply container macros with
+% certain information contained in them.
+%    \begin{macrocode}
+\def\yaaddresseestyle{\itshape}
+\def\yasetaddressee#1{%
+	\global\def\yaaddressee{{\yaaddresseestyle #1}}%
+}%
+\def\yawriterstyle{\itshape}
+\def\yasetwriter#1{%
+	\global\def\yawriter{{\yawriterstyle #1}}%
+}%
+\def\yalastpagestyle{}
+\def\yalastpage{%
+	{\yalastpagestyle \pageref{thelast}}%
+}%
+%    \end{macrocode}
+% Now we can start work on the address commands.  These
+% define addresses that can then be referred to by name,
+% similarly to the letterheads.  It takes a first argument,
+% the name of the address; a second, the short name you'd
+% like to be used for the |\yawriter| or |\yaaddressee|; and
+% a third, the actual code for the address.
+%    \begin{macrocode}
+\def\defineaddress#1#2#3{%
+	\global\expandafter\def\csname address#1\endcsname{%
+		\noindent\parskip=0pt\parindent=0pt%
+		#3%
+	}%
+	\global\expandafter\def\csname shortname#1\endcsname{%
+		#2%
+	}%
+}%
+%    \end{macrocode}
+% Now we define three commands to actually use this.  We can
+% issue |\yatoaddress{NAME}|, which will typeset the actual
+% address and set the addressee to the short name define in
+% the second argument of |\defineaddress|; and
+% |\yareturnaddress{NAME}|, which does the same thing but
+% sets the writer rather than the addressee.
+% |\yafromaddress| sets the writer but does not typeset the
+% address.  Finally, |\yaaddress| just typesets the address
+% by itself.
+%    \begin{macrocode}
+\def\yatoaddress#1{%
+	\yasetaddressee{\csname shortname#1\endcsname}%
+	\csname address#1\endcsname%
+}%
+\def\yareturnaddress#1{%
+	\yasetwriter{\csname shortname#1\endcsname}%
+	\csname address#1\endcsname%
+}%
+\def\yafromaddress#1{%
+	\yasetwriter{\csname shortname#1\endcsname}%
+}%
+\def\yaaddress#1{%
+	\csname address#1\endcsname%
+}%
+%    \end{macrocode}
+% Now we define the code for envelopes.  This is pretty
+% easy to follow.  |\yaenvelope| takes two arguments, the
+% width and height of the envelope.  It uses |\yaenvtoaddr|
+% and |\yaenvretaddr| in the place the appropriate
+% addresses.  We also provide |\yaenvunit| to let people use
+% whatever unit they want; |1in| is the default.
+%    \begin{macrocode}
+\RequirePackage{textpos}
+\def\yashowboxeson{%
+	\TPoptions{showboxes=true}
+}%
+\def\yashowboxesoff{%
+	\TPoptions{showboxes=false}
+}%
+\def\yaenvunit#1{%
+	\setlength{\TPHorizModule}{#1}%
+	\setlength{\TPVertModule}{#1}%
+}%
+\yaenvunit{0.1in}
+\def\yaenvtoaddr{%
+	TO ADDRESS%
+}%
+\def\yaenvretaddr{%
+	RETURN ADDRESS%
+}%
+\newcount\yaenvrethskip\yaenvrethskip=2
+\newcount\yaenvretvskip\yaenvretvskip=1
+\newcount\yaenvtohskip\yaenvtohskip=42
+\newcount\yaenvtovskip\yaenvtovskip=18
+\def\yaenvelope#1#2{%
+	\clearpage%
+	\eject\pdfpagewidth=#1 \pdfpageheight=#2%
+	\thispagestyle{yaenvpage}
+	\begin{textblock}{100}(\yaenvrethskip,\yaenvretvskip)
+		\parskip=0pt\parindent=0pt%
+		\yaenvretaddr%
+	\end{textblock}
+	\begin{textblock}{100}(\yaenvtohskip,\yaenvtovskip)
+		\parskip=0pt\parindent=0pt%
+		\yaenvtoaddr%
+	\end{textblock}
+}%
+\def\yabusiness{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=42
+	\global\yaenvtovskip=18
+	\yaenvelope{9.5in}{4.125in}%
+}%
+\def\yananoxenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=42
+	\global\yaenvtovskip=18
+	\yaenvelope{9.5in}{4.125in}%
+}%
+\def\yadlenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=36
+	\global\yaenvtovskip=18
+	\yaenvelope{8.66in}{4.33in}%
+}%
+\def\yacvienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=26
+	\global\yaenvtovskip=20
+	\yaenvelope{6.4in}{4.5in}%
+}%
+\def\yacvicvenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=42
+	\global\yaenvtovskip=18
+	\yaenvelope{9in}{4.5in}%
+}%
+\def\yacvenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=38
+	\global\yaenvtovskip=28
+	\yaenvelope{9in}{6.4in}%
+}%
+\def\yacivenvelope{%
+	\global\yaenvrethskip=3
+	\global\yaenvretvskip=3
+	\global\yaenvtohskip=60
+	\global\yaenvtovskip=42
+	\yaenvelope{12.8in}{9.0in}%
+}%
+\def\yaciiienvelope{%
+	\global\yaenvrethskip=3
+	\global\yaenvretvskip=3
+	\global\yaenvtohskip=84
+	\global\yaenvtovskip=60
+	\yaenvelope{18in}{12.8in}%
+}%
+\def\yanaaiienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=22
+	\global\yaenvtovskip=20
+	\yaenvelope{5.75in}{4.375in}%
+}%
+\def\yanaavienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=26
+	\global\yaenvtovskip=22
+	\yaenvelope{6.5in}{4.75in}%
+}%
+\def\yanaaviienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=30
+	\global\yaenvtovskip=24
+	\yaenvelope{7.25in}{5.25in}%
+}%
+\def\yanaaviiienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=34
+	\global\yaenvtovskip=24
+	\yaenvelope{8.125in}{5.5in}%
+}%
+\def\yanaaixenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=38
+	\global\yaenvtovskip=28
+	\yaenvelope{8.75in}{5.75in}%
+}%
+\def\yanaaxenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=42
+	\global\yaenvtovskip=28
+	\yaenvelope{9.5in}{6.00in}%
+}%
+\def\yananovienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=26
+	\global\yaenvtovskip=14
+	\yaenvelope{6.5in}{3.625in}%
+}%
+\def\yananoviienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=32
+	\global\yaenvtovskip=16
+	\yaenvelope{7.5in}{3.875in}%
+}%
+\def\yananoixenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=36
+	\global\yaenvtovskip=16
+	\yaenvelope{8.875in}{3.875in}%
+}%
+\def\yananoxienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=48
+	\global\yaenvtovskip=20
+	\yaenvelope{10.375in}{4.5in}%
+}%
+\def\yananoxiienvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=48
+	\global\yaenvtovskip=22
+	\yaenvelope{11in}{4.75in}%
+}%
+\def\yananoxivenvelope{%
+	\global\yaenvrethskip=2
+	\global\yaenvretvskip=1
+	\global\yaenvtohskip=52
+	\global\yaenvtovskip=22
+	\yaenvelope{11.5in}{5in}%
+}%
+%    \end{macrocode}
+% 
+% Lastly, we write the label code.  This code allows us to
+% print arbitrary pages of labels.
+% 
+% First, we must define a little macro to allow nested
+% loops.  This is taken wholesale from the accepted
+% StackExchange answer to question 58049, written by David
+% Carlisle.  As is usual with David Carlisle's code, it's
+% remarkable in its simplicity and elegance.
+%    \begin{macrocode}
+\def\nloop#1{%
+	\def\nl@@p##1##2\repeat#1{%
+		\def##1{##2\relax\expandafter##1\fi}%
+	##1\let##1\relax}%
+	\expandafter\nl@@p\csname nl@@p-\string#1\endcsname
+}%
+%    \end{macrocode}
+% Now we can actually define the label code.  First we need
+% some lengths and counts.
+%    \begin{macrocode}
+\newdimen\ya@labwidth
+\newdimen\ya@labheight
+\newdimen\ya@tempboxh\newdimen\ya@tempboxv
+\newcount\ya@loopi
+\newcount\ya@loopj
+\newcount\ya@numacross
+\newcount\ya@numdown
+\newdimen\yalabelmarg\yalabelmarg=0.1in
+%    \end{macrocode}
+% Now comes the main macro, |\yalabelsheet|, which takes
+% eight arguments:  the width and height of the page itself,
+% the width and height of each label, the vertical and
+% horizontal distance between each label, how many labels
+% are across the width of the page, and how many labels are
+% down the height of the page.
+%
+% This is a bit convoluted due to length limitations in
+% |textpos|; so we have to define the lengths as half their
+% real value, then multiply them again by 2 later on.
+%    \begin{macrocode}
+\def\yalabeltext{}
+\newdimen\yalableftmarg\yalableftmarg=0pt
+\newdimen\yalabrightmarg\yalabrightmarg=0pt
+\newdimen\yalabtopmarg\yalabtopmarg=0pt
+\newdimen\yalabbotmarg\yalabbotmarg=0pt
+\def\yalabelsheet#1#2#3#4#5#6#7#8{%
+	\clearpage%
+	\eject\pdfpagewidth=#1 \pdfpageheight=#2%
+	\ifdim\yalableftmarg=0pt \yalableftmarg=#5\fi
+	\ifdim\yalabrightmarg=0pt \yalabrightmarg=#5\fi
+	\ifdim\yalabtopmarg=0pt \yalabtopmarg=#6\fi
+	\ifdim\yalabbotmarg=0pt \yalabbotmarg=#6\fi
+	\newgeometry{left=\the\yalableftmarg,right=\the\yalabrightmarg,
+		top=\the\yalabtopmarg,bottom=\the\yalabbotmarg}
+	\thispagestyle{empty}
+	\ya@numacross=#7 \ya@numdown=#8
+	\ya@labwidth=#3 \ya@labheight=#4
+	\ya@tempboxh=#3 \ya@tempboxv=#4
+	\advance\ya@labwidth by#5
+	\advance\ya@labheight by#6
+	\divide\ya@labwidth by2%
+	\divide\ya@labheight by2%
+	\newcount\ya@acthfact\newcount\ya@actvfact
+	\setlength{\TPHorizModule}{\the\ya@labwidth}%
+	\setlength{\TPVertModule}{\the\ya@labheight}%
+	\ya@loopi=0 \ya@loopj=0
+	\nloop1\ifnum\ya@loopi<\ya@numdown
+		\ya@actvfact=\ya@loopi\multiply\ya@actvfact by2
+		\ya@loopj=0
+		\nloop2\ifnum\ya@loopj<\ya@numacross
+			\ya@acthfact=\ya@loopj\multiply\ya@acthfact by2
+			\begin{textblock}{100}(\ya@acthfact,\ya@actvfact)
+				\hbox to#3{%
+					\hskip\yalabelmarg%
+					\vbox to#4{%
+						\parskip=0pt\parindent=0pt%
+						\vfil%
+							\yalabeltext%
+						\vfil%
+					}%
+				}%
+			\end{textblock}
+			\advance\ya@loopj by1%
+		\repeat2
+		\advance\ya@loopi by1%
+	\repeat1
+}%
+%    \end{macrocode}
+% Now we define a macro allowing text to be placed in an
+% arbitrary label.  Three arguments:  the text to be placed;
+% the numbers of columns across; and the number of rows
+% down.
+%    \begin{macrocode}
+\def\yaplacelabel#1#2#3{%
+	\newcount\ya@numacrossii\ya@numacrossii=#2
+	\newcount\ya@numdownii\ya@numdownii=#3
+	\multiply\ya@numacrossii by2%
+	\multiply\ya@numdownii by2%
+	\begin{textblock}{100}(\ya@numacrossii,\ya@numdownii)
+		\hbox to\ya@tempboxh{%
+			\hskip\yalabelmarg%
+			\vbox to\ya@tempboxv{%
+				\parskip=0pt\parindent=0pt%
+				\vfil%
+					#1%
+				\vfil%
+			}%
+		}%
+	\end{textblock}
+}%
+%    \end{macrocode}
+% Define a couple of preset options for certain sheets of
+% labels; namely, for the two types of sheets that I
+% happened to have near me at the time of writing this
+% class.  (Also the only ones I've ever really used.)
+% Individual ones are prefixed with |\avery| and then the
+% number put afterwards; you call these by issuing
+% |\yaavery| with the single argument of the serial number
+% of the label sheet you want.
+%    \begin{macrocode}
+\expandafter\def\csname avery8663\endcsname{%
+	\yalabtopmarg=0.5in
+	\yalabbotmarg=0.5in
+	\yalableftmarg=0.15625in
+	\yalabrightmarg=0.15625in
+	\yalabelsheet{8.5in}{11in}{4in}{1.95in}{0.15625in}{0in}{2}{5}%
+}%
+\expandafter\def\csname avery8660\endcsname{%
+	\yalabtopmarg=0.5in
+	\yalabbotmarg=0.5in
+	\yalableftmarg=0.1875in
+	\yalabrightmarg=0.1875in
+	\yalabelsheet{8.5in}{11in}{2.625in}{25mm}{0.125in}{0in}{3}{10}%
+}%
+\def\yaavery#1{%
+	\csname avery#1\endcsname%
+}%
+%    \end{macrocode}
+% Finally, we put in some code to run at the
+% |\begin{document}| command, just to get the ball rolling.
+%    \begin{macrocode}
+\AtBeginDocument{%
+	\pagestyle{yaotherpage}%
+	\thispagestyle{yafirstpage}%
+	\ifnum\ya@lettertype=0
+		\yaletterblock
+	\fi\ifnum\ya@lettertype=1
+		\yalettermodblock
+	\fi\ifnum\ya@lettertype=2
+		\yaletternormal
+	\fi
+}
+%    \end{macrocode}
+%
+% Happy \TeX{}ing!
+%
+% \PrintIndex
diff --git a/Master/texmf-dist/source/latex/yaletter/yaletter.ins b/Master/texmf-dist/source/latex/yaletter/yaletter.ins
new file mode 100644
index 00000000000..923da1caa21
--- /dev/null
+++ b/Master/texmf-dist/source/latex/yaletter/yaletter.ins
@@ -0,0 +1,65 @@
+% +AMDG  This document was begun on 6 December 1200, the
+% feast of St. Nicholas, and it is humbly dedicated to him
+% and to the Immaculate Heart of Mary for her prayers, and
+% to the Sacred Heart of Jesus for His mercy.
+%
+% This document is copyright 2016 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3 of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of yaletter.dtx, yaletter.ins, and
+% derived files yaletter.cls and yaletter.pdf.
+% \fi
+
+\input docstrip.tex
+
+\preamble
+This is a generated file.
+
+This document is copyright 2014 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3 of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of yaletter.dtx, yaletter.ins, and
+derived files yaletter.cls and yaletter.pdf.
+\endpreamble
+
+\keepsilent
+\generate{\file{yaletter.cls}{\from{yaletter.dtx}{package}}}
+
+\Msg{******************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space yaletter.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file yaletter.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{******************************************************}
+
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/yaletter/yaletter.cls b/Master/texmf-dist/tex/latex/yaletter/yaletter.cls
new file mode 100644
index 00000000000..1d7eb759e6a
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/yaletter/yaletter.cls
@@ -0,0 +1,595 @@
+%%
+%% This is file `yaletter.cls',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% yaletter.dtx  (with options: `package')
+%% This is a generated file.
+%% 
+%% This document is copyright 2014 by Donald P. Goodman, and is
+%% released publicly under the LaTeX Project Public License.  The
+%% distribution and modification of this work is constrained by the
+%% conditions of that license.  See
+%% http://www.latex-project.org/lppl.txt
+%% for the text of the license.  This document is released
+%% under version 1.3 of that license, and this work may be distributed
+%% or modified under the terms of that license or, at your option, any
+%% later version.
+%% 
+%% This work has the LPPL maintenance status 'maintained'.
+%% 
+%% The Current Maintainer of this work is Donald P. Goodman
+%% (dgoodmaniii@gmail.com).
+%% 
+%% This work consists of yaletter.dtx, yaletter.ins, and
+%% derived files yaletter.cls and yaletter.pdf.
+
+\NeedsTeXFormat{LaTeX2e}[1996/06/01]
+\ProvidesClass{yaletter}[2017/01/01 v1.1 Yet Another Letter Class]
+\RequirePackage{xkeyval}
+\pagenumbering{arabic}
+\newdimen\ya@lftmarg\ya@lftmarg=0.5in
+\newdimen\ya@rgtmarg\ya@rgtmarg=0.5in
+\newdimen\ya@topmarg\ya@topmarg=0.5in
+\newdimen\ya@botmarg\ya@botmarg=1.0in
+\paperheight=\the\pdfpageheight
+\paperwidth=\the\pdfpagewidth
+\newdimen\ya@pageheight\ya@pageheight=\the\paperheight
+\newdimen\ya@pagewidth\ya@pagewidth=\the\paperwidth
+\marginparwidth=0pt
+\marginparpush=0pt
+\topmargin=0pt
+\headheight=12pt
+\headsep=12pt
+\footskip=24pt
+\marginparsep=0pt
+\newdimen\ya@headheight\ya@headheight=\the\headheight
+\newdimen\ya@headsep\ya@headsep=\the\headsep
+\newdimen\ya@footskip\ya@footskip=\the\footskip
+\oddsidemargin=0pt
+\newdimen\ya@oddsidemargin\ya@oddsidemargin=\the\oddsidemargin
+\newdimen\ya@headwidth\ya@headwidth=0pt
+\def\ya@headrulewidth{0.4pt}
+\def\ya@footrulewidth{0.4pt}
+\newdimen\ya@predate\ya@predate=12pt
+\newdimen\ya@postdate\ya@postdate=12pt
+\newdimen\ya@preinsideaddr\ya@preinsideaddr=12pt
+\newdimen\ya@postinsideaddr\ya@postinsideaddr=0pt
+\newdimen\ya@presalutation\ya@presalutation=0pt
+\newdimen\ya@postsalutation\ya@postsalutation=0pt
+\newdimen\ya@prefarewell\ya@prefarewell=0pt
+\newdimen\ya@postfarewell\ya@postfarewell=12pt
+\newdimen\ya@presignature\ya@presignature=12pt
+\newdimen\ya@postsignature\ya@postsignature=0pt
+\newdimen\ya@preenclosure\ya@preenclosure=0pt
+\newdimen\ya@postenclosure\ya@postenclosure=0pt
+\def\ya@saluword{Dear }
+\def\ya@salupunct{:}
+\def\ya@farewellword{Sincerely}
+\def\ya@farewellpunct{,}
+\def\ya@signatureword{Your Name Here}
+\def\ya@enclosureword{Enclosure}
+\def\yaaddressee{}
+\def\yawriter{}
+\define@key{yaoptions}{lftmarg}{\global\ya@lftmarg=#1}
+\define@key{yaoptions}{rgtmarg}{\global\ya@rgtmarg=#1}
+\define@key{yaoptions}{topmarg}{\global\ya@topmarg=#1}
+\define@key{yaoptions}{botmarg}{\global\ya@botmarg=#1}
+\define@key{yaoptions}{pageheight}{\global\ya@pageheight=#1}
+\define@key{yaoptions}{pagewidth}{\global\ya@pagewidth=#1}
+\define@key{yaoptions}{footskip}{\global\ya@footskip=#1}
+\define@key{yaoptions}{headsep}{\global\ya@headsep=#1}
+\define@key{yaoptions}{headheight}{\global\ya@headheight=#1}
+\define@key{yaoptions}{oddsidemargin}{\global\ya@oddsidemargin=#1}
+\define@key{yaoptions}{headwidth}{\global\ya@headwidth=#1}
+\define@key{yaoptions}{headrulewidth}{\global\def\ya@headrulewidth{#1}}
+\define@key{yaoptions}{footrulewidth}{\global\def\ya@footrulewidth{#1}}
+\define@key{yaoptions}{predate}{\global\ya@predate=#1}
+\define@key{yaoptions}{postdate}{\global\ya@postdate=#1}
+\define@key{yaoptions}{preinsideaddr}{\global\ya@preinsideaddr=#1}
+\define@key{yaoptions}{postinsideaddr}{\global\ya@postinsideaddr=#1}
+\define@key{yaoptions}{presalutation}{\global\ya@presalutation=#1}
+\define@key{yaoptions}{postsalutation}{\global\ya@postsalutation=#1}
+\define@key{yaoptions}{prefarewell}{\global\ya@prefarewell=#1}
+\define@key{yaoptions}{postfarewell}{\global\ya@postfarewell=#1}
+\define@key{yaoptions}{presignature}{\global\ya@presignature=#1}
+\define@key{yaoptions}{postsignature}{\global\ya@postsignature=#1}
+\define@key{yaoptions}{preenclosure}{\global\ya@preenclosure=#1}
+\define@key{yaoptions}{postenclosure}{\global\ya@postenclosure=#1}
+\define@key{yaoptions}{datehskip}{\global\yahdateskip=#1}
+\define@key{yaoptions}{insideaddrhskip}{\global\yahinsideaddrskip=#1}
+\define@key{yaoptions}{saluskip}{\global\yahsalutationskip=#1}
+\define@key{yaoptions}{farewellskip}{\global\yahfarewellskip=#1}
+\define@key{yaoptions}{signatureskip}{\global\yahsignatureskip=#1}
+\define@key{yaoptions}{enclosureskip}{\global\yahenclosureskip=#1}
+\define@key{yaoptions}{enclosureword}{\global\def\ya@enclosureword{#1}}
+\define@key{yaoptions}{saluword}{\global\def\ya@saluword{#1}}
+\define@key{yaoptions}{salupunct}{\global\def\ya@salupunct{#1}}
+\define@key{yaoptions}{farewellword}{\global\def\ya@farewellword{#1}}
+\define@key{yaoptions}{farewellpunct}{\global\def\ya@farewellpunct{#1}}
+\define@key{yaoptions}{signatureword}{\global\def\ya@signatureword{#1}}
+\define@key{yaoptions}{signatureword}{\global\def\ya@signatureword{#1}}
+\define@key{yaoptions}{addressee}{\yasetaddressee{#1}}
+\define@key{yaoptions}{writer}{\yasetwriter{#1}}
+\define@key{yaoptions}{parskip}{\global\yaparskip=#1}
+\define@key{yaoptions}{parindent}{\global\yaparindent=#1}
+\define@key{yaoptions}{datafile}{\global\input{#1}}
+\newcommand\yaoptions[1]{%
+\setkeys{yaoptions}{#1}%
+\geometry{top=\the\ya@topmarg,bottom=\the\ya@botmarg,
+left=\the\ya@lftmarg,right=\the\ya@rgtmarg,
+paperheight=\the\ya@pageheight,paperwidth=\the\ya@pagewidth,
+footskip=\the\ya@footskip,headsep=\the\ya@headsep,
+headheight=\the\ya@headheight}
+\ifdim\ya@headwidth=0pt
+\global\headwidth=\the\textwidth
+\else
+\global\headwidth=\the\ya@headwidth
+\fi
+\renewcommand{\headrulewidth}{\ya@headrulewidth}
+\renewcommand{\footrulewidth}{\ya@footrulewidth}
+}%
+\renewcommand{\normalsize}{\fontsize{10pt}{12pt}\selectfont}
+\newcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt}
+\newcommand\tiny{\@setfontsize\tiny\@vpt\@vipt}
+\newcommand\large{\@setfontsize\large\@xiipt{14}}
+\newcommand\Large{\@setfontsize\Large\@xivpt{18}}
+\newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
+\newcommand\huge{\@setfontsize\huge\@xxpt{25}}
+\newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
+\paperheight=\the\pdfpageheight
+\paperwidth=\the\pdfpagewidth
+\RequirePackage{geometry}
+\RequirePackage{fancyhdr}
+\fancypagestyle{yafirstpage}{%
+\renewcommand\headrulewidth{0pt}
+\renewcommand\footrulewidth{0.4pt}
+\fancyhf{}%
+\fancyfoot[C]{Page \thepage\ of \yalastpage}%
+}%
+\fancypagestyle{yaotherpage}{%
+\renewcommand\headrulewidth{0.4pt}
+\renewcommand\footrulewidth{0.4pt}
+\fancyhf{}%
+\fancyhead[L]{\yawriter\ to \yaaddressee}%
+\fancyhead[R]{\yathedate}%
+\fancyfoot[C]{Page \thepage\ of \yalastpage}%
+}%
+\fancypagestyle{yaenvpage}{%
+\renewcommand\headrulewidth{0pt}
+\renewcommand\footrulewidth{0pt}
+\fancyhf{}%
+\newgeometry{margin=0pt}
+}%
+\def\defineletterhead#1#2{%
+\global\expandafter\def\csname letterhead#1\endcsname{%
+\hbox{#2}%
+}%
+\vskip1pt
+\@afterindentfalse\@afterheading
+}%
+\def\yauseletterhead#1{%
+\csname letterhead#1\endcsname%
+}%
+\newcount\ya@lettertype\ya@lettertype=0
+\newdimen\yaparskip\yaparskip=12pt
+\newdimen\yaparindent\yaparindent=0pt
+\newdimen\yahdateskip\yahdateskip=0pt
+\newdimen\yahinsideaddrskip\yahinsideaddrskip=0pt
+\newdimen\yahsalutationskip\yahsalutationskip=0pt
+\newdimen\yahfarewellskip\yahfarewellskip=0pt
+\newdimen\yahsignatureskip\yahsignatureskip=0pt
+\newdimen\yahenclosureskip\yahenclosureskip=0pt
+\def\yaletterblock{%
+\everypar={%
+\parindent=\the\yaparindent
+\parskip=\the\yaparskip
+}%
+}%
+\def\yalettermodblock{%
+\everypar={%
+\parindent=\the\yaparindent
+\parskip=\the\yaparskip
+}%
+\yahdateskip=\textwidth%
+\divide\yahdateskip by2%
+\yahfarewellskip=\textwidth%
+\divide\yahfarewellskip by 2%
+\yahsignatureskip=\textwidth%
+\divide\yahsignatureskip by 2%
+\ya@lettertype=1
+}%
+\def\yaletternormal{%
+\yaparskip=0pt
+\yaparindent=24pt
+\everypar={%
+\parindent=\the\yaparindent
+\parskip=\the\yaparskip
+}%
+\yahdateskip=\textwidth%
+\divide\yahdateskip by2%
+\yahfarewellskip=\textwidth%
+\divide\yahfarewellskip by2%
+\yahsignatureskip=\textwidth%
+\divide\yahsignatureskip by2%
+\ya@lettertype=2
+\ya@preinsideaddr=24pt%
+\ya@presalutation=12pt%
+\ya@postsalutation=12pt%
+\ya@prefarewell=12pt%
+}
+\def\yadatestyle{}
+\def\yadate#1{%
+\vskip\ya@predate%
+\noindent\hskip\yahdateskip\hbox{%
+\yadatestyle #1%
+\hfil%
+}%
+\vskip\ya@postdate%
+\global\def\yathedate{#1}%
+}%
+\def\yainsideaddrstyle{}
+\def\yainsideaddr#1{%
+\vskip\ya@preinsideaddr%
+\noindent\hskip\yahinsideaddrskip\hbox{%
+\vbox{\yainsideaddrstyle\noindent #1}
+}
+\vskip\ya@postinsideaddr%
+}%
+\def\yasalutationstyle{}
+\def\yasalutation#1{%
+\vskip\ya@presalutation%
+\noindent\hskip\yahsalutationskip\hbox{%
+\yasalutationstyle%
+\ya@saluword #1\ya@salupunct\hfil%
+}%
+\vskip\ya@postsalutation%
+}%
+\def\yafarewellstyle{}
+\def\yafarewell{%
+\vskip\ya@prefarewell%
+\noindent\hskip\yahfarewellskip\hbox{%
+\yafarewellstyle%
+\ya@farewellword\ya@farewellpunct\hfil%
+}%
+\vskip\ya@postfarewell%
+}%
+\def\yasignaturestyle{}
+\def\yasignature{%
+\vskip\ya@presignature%
+\noindent\hskip\yahsignatureskip\hbox{%
+\yasignaturestyle%
+\ya@signatureword\hfil%
+}%
+\vskip\ya@postsignature%
+\label{thelast}%
+}%
+\def\yaenclosurestyle{}
+\def\yaenclosure{%
+\vskip\ya@preenclosure%
+\noindent\hskip\yahenclosureskip\hbox to\linewidth{%
+\yaenclosurestyle%
+\ya@enclosureword\hfil%
+}%
+\vskip\ya@postenclosure%
+}%
+\def\yaaddresseestyle{\itshape}
+\def\yasetaddressee#1{%
+\global\def\yaaddressee{{\yaaddresseestyle #1}}%
+}%
+\def\yawriterstyle{\itshape}
+\def\yasetwriter#1{%
+\global\def\yawriter{{\yawriterstyle #1}}%
+}%
+\def\yalastpagestyle{}
+\def\yalastpage{%
+{\yalastpagestyle \pageref{thelast}}%
+}%
+\def\defineaddress#1#2#3{%
+\global\expandafter\def\csname address#1\endcsname{%
+\noindent\parskip=0pt\parindent=0pt%
+#3%
+}%
+\global\expandafter\def\csname shortname#1\endcsname{%
+#2%
+}%
+}%
+\def\yatoaddress#1{%
+\yasetaddressee{\csname shortname#1\endcsname}%
+\csname address#1\endcsname%
+}%
+\def\yareturnaddress#1{%
+\yasetwriter{\csname shortname#1\endcsname}%
+\csname address#1\endcsname%
+}%
+\def\yafromaddress#1{%
+\yasetwriter{\csname shortname#1\endcsname}%
+}%
+\def\yaaddress#1{%
+\csname address#1\endcsname%
+}%
+\RequirePackage{textpos}
+\def\yashowboxeson{%
+\TPoptions{showboxes=true}
+}%
+\def\yashowboxesoff{%
+\TPoptions{showboxes=false}
+}%
+\def\yaenvunit#1{%
+\setlength{\TPHorizModule}{#1}%
+\setlength{\TPVertModule}{#1}%
+}%
+\yaenvunit{0.1in}
+\def\yaenvtoaddr{%
+TO ADDRESS%
+}%
+\def\yaenvretaddr{%
+RETURN ADDRESS%
+}%
+\newcount\yaenvrethskip\yaenvrethskip=2
+\newcount\yaenvretvskip\yaenvretvskip=1
+\newcount\yaenvtohskip\yaenvtohskip=42
+\newcount\yaenvtovskip\yaenvtovskip=18
+\def\yaenvelope#1#2{%
+\clearpage%
+\eject\pdfpagewidth=#1 \pdfpageheight=#2%
+\thispagestyle{yaenvpage}
+\begin{textblock}{100}(\yaenvrethskip,\yaenvretvskip)
+\parskip=0pt\parindent=0pt%
+\yaenvretaddr%
+\end{textblock}
+\begin{textblock}{100}(\yaenvtohskip,\yaenvtovskip)
+\parskip=0pt\parindent=0pt%
+\yaenvtoaddr%
+\end{textblock}
+}%
+\def\yabusiness{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=42
+\global\yaenvtovskip=18
+\yaenvelope{9.5in}{4.125in}%
+}%
+\def\yananoxenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=42
+\global\yaenvtovskip=18
+\yaenvelope{9.5in}{4.125in}%
+}%
+\def\yadlenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=36
+\global\yaenvtovskip=18
+\yaenvelope{8.66in}{4.33in}%
+}%
+\def\yacvienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=26
+\global\yaenvtovskip=20
+\yaenvelope{6.4in}{4.5in}%
+}%
+\def\yacvicvenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=42
+\global\yaenvtovskip=18
+\yaenvelope{9in}{4.5in}%
+}%
+\def\yacvenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=38
+\global\yaenvtovskip=28
+\yaenvelope{9in}{6.4in}%
+}%
+\def\yacivenvelope{%
+\global\yaenvrethskip=3
+\global\yaenvretvskip=3
+\global\yaenvtohskip=60
+\global\yaenvtovskip=42
+\yaenvelope{12.8in}{9.0in}%
+}%
+\def\yaciiienvelope{%
+\global\yaenvrethskip=3
+\global\yaenvretvskip=3
+\global\yaenvtohskip=84
+\global\yaenvtovskip=60
+\yaenvelope{18in}{12.8in}%
+}%
+\def\yanaaiienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=22
+\global\yaenvtovskip=20
+\yaenvelope{5.75in}{4.375in}%
+}%
+\def\yanaavienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=26
+\global\yaenvtovskip=22
+\yaenvelope{6.5in}{4.75in}%
+}%
+\def\yanaaviienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=30
+\global\yaenvtovskip=24
+\yaenvelope{7.25in}{5.25in}%
+}%
+\def\yanaaviiienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=34
+\global\yaenvtovskip=24
+\yaenvelope{8.125in}{5.5in}%
+}%
+\def\yanaaixenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=38
+\global\yaenvtovskip=28
+\yaenvelope{8.75in}{5.75in}%
+}%
+\def\yanaaxenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=42
+\global\yaenvtovskip=28
+\yaenvelope{9.5in}{6.00in}%
+}%
+\def\yananovienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=26
+\global\yaenvtovskip=14
+\yaenvelope{6.5in}{3.625in}%
+}%
+\def\yananoviienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=32
+\global\yaenvtovskip=16
+\yaenvelope{7.5in}{3.875in}%
+}%
+\def\yananoixenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=36
+\global\yaenvtovskip=16
+\yaenvelope{8.875in}{3.875in}%
+}%
+\def\yananoxienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=48
+\global\yaenvtovskip=20
+\yaenvelope{10.375in}{4.5in}%
+}%
+\def\yananoxiienvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=48
+\global\yaenvtovskip=22
+\yaenvelope{11in}{4.75in}%
+}%
+\def\yananoxivenvelope{%
+\global\yaenvrethskip=2
+\global\yaenvretvskip=1
+\global\yaenvtohskip=52
+\global\yaenvtovskip=22
+\yaenvelope{11.5in}{5in}%
+}%
+\def\nloop#1{%
+\def\nl@@p##1##2\repeat#1{%
+\def##1{##2\relax\expandafter##1\fi}%
+##1\let##1\relax}%
+\expandafter\nl@@p\csname nl@@p-\string#1\endcsname
+}%
+\newdimen\ya@labwidth
+\newdimen\ya@labheight
+\newdimen\ya@tempboxh\newdimen\ya@tempboxv
+\newcount\ya@loopi
+\newcount\ya@loopj
+\newcount\ya@numacross
+\newcount\ya@numdown
+\newdimen\yalabelmarg\yalabelmarg=0.1in
+\def\yalabeltext{}
+\newdimen\yalableftmarg\yalableftmarg=0pt
+\newdimen\yalabrightmarg\yalabrightmarg=0pt
+\newdimen\yalabtopmarg\yalabtopmarg=0pt
+\newdimen\yalabbotmarg\yalabbotmarg=0pt
+\def\yalabelsheet#1#2#3#4#5#6#7#8{%
+\clearpage%
+\eject\pdfpagewidth=#1 \pdfpageheight=#2%
+\ifdim\yalableftmarg=0pt \yalableftmarg=#5\fi
+\ifdim\yalabrightmarg=0pt \yalabrightmarg=#5\fi
+\ifdim\yalabtopmarg=0pt \yalabtopmarg=#6\fi
+\ifdim\yalabbotmarg=0pt \yalabbotmarg=#6\fi
+\newgeometry{left=\the\yalableftmarg,right=\the\yalabrightmarg,
+top=\the\yalabtopmarg,bottom=\the\yalabbotmarg}
+\thispagestyle{empty}
+\ya@numacross=#7 \ya@numdown=#8
+\ya@labwidth=#3 \ya@labheight=#4
+\ya@tempboxh=#3 \ya@tempboxv=#4
+\advance\ya@labwidth by#5
+\advance\ya@labheight by#6
+\divide\ya@labwidth by2%
+\divide\ya@labheight by2%
+\newcount\ya@acthfact\newcount\ya@actvfact
+\setlength{\TPHorizModule}{\the\ya@labwidth}%
+\setlength{\TPVertModule}{\the\ya@labheight}%
+\ya@loopi=0 \ya@loopj=0
+\nloop1\ifnum\ya@loopi<\ya@numdown
+\ya@actvfact=\ya@loopi\multiply\ya@actvfact by2
+\ya@loopj=0
+\nloop2\ifnum\ya@loopj<\ya@numacross
+\ya@acthfact=\ya@loopj\multiply\ya@acthfact by2
+\begin{textblock}{100}(\ya@acthfact,\ya@actvfact)
+\hbox to#3{%
+\hskip\yalabelmarg%
+\vbox to#4{%
+\parskip=0pt\parindent=0pt%
+\vfil%
+\yalabeltext%
+\vfil%
+}%
+}%
+\end{textblock}
+\advance\ya@loopj by1%
+\repeat2
+\advance\ya@loopi by1%
+\repeat1
+}%
+\def\yaplacelabel#1#2#3{%
+\newcount\ya@numacrossii\ya@numacrossii=#2
+\newcount\ya@numdownii\ya@numdownii=#3
+\multiply\ya@numacrossii by2%
+\multiply\ya@numdownii by2%
+\begin{textblock}{100}(\ya@numacrossii,\ya@numdownii)
+\hbox to\ya@tempboxh{%
+\hskip\yalabelmarg%
+\vbox to\ya@tempboxv{%
+\parskip=0pt\parindent=0pt%
+\vfil%
+#1%
+\vfil%
+}%
+}%
+\end{textblock}
+}%
+\expandafter\def\csname avery8663\endcsname{%
+\yalabtopmarg=0.5in
+\yalabbotmarg=0.5in
+\yalableftmarg=0.15625in
+\yalabrightmarg=0.15625in
+\yalabelsheet{8.5in}{11in}{4in}{1.95in}{0.15625in}{0in}{2}{5}%
+}%
+\expandafter\def\csname avery8660\endcsname{%
+\yalabtopmarg=0.5in
+\yalabbotmarg=0.5in
+\yalableftmarg=0.1875in
+\yalabrightmarg=0.1875in
+\yalabelsheet{8.5in}{11in}{2.625in}{25mm}{0.125in}{0in}{3}{10}%
+}%
+\def\yaavery#1{%
+\csname avery#1\endcsname%
+}%
+\AtBeginDocument{%
+\pagestyle{yaotherpage}%
+\thispagestyle{yafirstpage}%
+\ifnum\ya@lettertype=0
+\yaletterblock
+\fi\ifnum\ya@lettertype=1
+\yalettermodblock
+\fi\ifnum\ya@lettertype=2
+\yaletternormal
+\fi
+}
+\endinput
+%%
+%% End of file `yaletter.cls'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 01a2ae8c95b..a74bd545e16 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -656,7 +656,8 @@ my @TLP_working = qw(
     xoptarg xpatch xpeek xpiano xpicture xpinyin xprintlen xpunctuate
     xq xsavebox xskak xstring xtab xunicode
     xwatermark xyling xymtex xypic xypic-tut-pt xytree
-  yafoot yagusylo yannisgr yathesis yax ycbook ydoc yfonts yfonts-t1 yhmath
+  yafoot yagusylo yaletter yannisgr yathesis yax
+    ycbook ydoc yfonts yfonts-t1 yhmath
     yinit-otf york-thesis youngtab yplan ytableau
   zed-csp zhnumber ziffer zhmetrics zhmetrics-uptex zhspacing zlmtt
     zwgetfdate zwpagelayout
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index 9df1742de57..fe7a4efa119 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -1118,6 +1118,7 @@ depend xtab
 depend xwatermark
 depend xytree
 depend yafoot
+depend yaletter
 depend yagusylo
 depend ycbook
 depend ydoc
diff --git a/Master/tlpkg/tlpsrc/yaletter.tlpsrc b/Master/tlpkg/tlpsrc/yaletter.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/yaletter.tlpsrc