summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2021-06-17 20:48:26 +0000
committerKarl Berry <karl@freefriends.org>2021-06-17 20:48:26 +0000
commit333487fa7d67a14476a0bd7734bffff2fabfd64f (patch)
treec19b5ea90736b33fa18be27b34ceb096e17bcdd0
parent2b525643dd1aa6f46e24a42d3275777f53d5ff92 (diff)
gs1 [was GS1] (17jun21)
git-svn-id: svn://tug.org/texlive/trunk@59620 c570f23f-e606-0410-a88d-b1316a301751
-rw-r--r--Master/texmf-dist/doc/latex/gs1/EANBarcode.tex66
-rw-r--r--Master/texmf-dist/doc/latex/gs1/EANControlDigit.tex60
-rw-r--r--Master/texmf-dist/doc/latex/gs1/GS1.pdfbin0 -> 727465 bytes
-rw-r--r--Master/texmf-dist/doc/latex/gs1/GSSetup.tex75
-rw-r--r--Master/texmf-dist/doc/latex/gs1/GS_cut_EAN_control_digit.tex71
-rw-r--r--Master/texmf-dist/doc/latex/gs1/GS_set_EAN_control_digit.tex68
-rw-r--r--Master/texmf-dist/doc/latex/gs1/GS_set_code_digit_seq.tex86
-rw-r--r--Master/texmf-dist/doc/latex/gs1/README25
-rw-r--r--Master/texmf-dist/doc/latex/gs1/int_set_to_EAN_control_digit.tex68
-rw-r--r--Master/texmf-dist/doc/latex/gs1/rule-D.pdfbin0 -> 428683 bytes
-rw-r--r--Master/texmf-dist/source/latex/gs1/GS1.dtx1033
-rw-r--r--Master/texmf-dist/source/latex/gs1/GS1.ins79
-rw-r--r--Master/texmf-dist/source/latex/gs1/rule-D.dtx136
-rw-r--r--Master/texmf-dist/tex/latex/gs1/GS1.sty355
-rw-r--r--Master/texmf-dist/tex/latex/gs1/rule-D.sty56
-rwxr-xr-xMaster/tlpkg/bin/tlpkg-ctan-check4
-rwxr-xr-xMaster/tlpkg/libexec/ctan2tds2
-rw-r--r--Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc2
-rw-r--r--Master/tlpkg/tlpsrc/gs1.tlpsrc0
19 files changed, 2182 insertions, 4 deletions
diff --git a/Master/texmf-dist/doc/latex/gs1/EANBarcode.tex b/Master/texmf-dist/doc/latex/gs1/EANBarcode.tex
new file mode 100644
index 00000000000..5990eb59e93
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/EANBarcode.tex
@@ -0,0 +1,66 @@
+%%
+%% This is file `EANBarcode.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,EANBarcode')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\raggedright
+\verb|\EANBarcode{ISBN 978-3-86541-459-5}|:
+ \EANBarcode{ISBN 978-3-86541-459-5}
+
+\verb|\EANBarcode[add_control]{ISBN 978-3-86541-459-}|:
+ \EANBarcode[add_control]{ISBN 978-3-86541-459-}
+
+\verb|\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}|:
+\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}
+
+\verb|\EANBarcode[code=EAN-8]{20123451}|:
+ \EANBarcode[code=EAN-8]{20123451}
+
+\verb|\EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}|:
+ \EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}
+
+\end{document}
+%%
+%%
+%% End of file `EANBarcode.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/EANControlDigit.tex b/Master/texmf-dist/doc/latex/gs1/EANControlDigit.tex
new file mode 100644
index 00000000000..ac7af68ac2b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/EANControlDigit.tex
@@ -0,0 +1,60 @@
+%%
+%% This is file `EANControlDigit.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,EANControlDigit')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\begin{tabular}{ll}
+ \hline
+ Calculated & Known \\
+ \hline
+ 501234567890-\EANControlDigit{501234567890} & 501234567890-0 \\
+ ISBN 978-3-86541-459-\EANControlDigit{ISBN 978-3-86541-459} & ISBN
+ 978-3-86541-459-5 \\
+ EAN-8: 2012345\EANControlDigit{2012345} & EAN-8: 20123451 \\
+ \hline
+\end{tabular}
+\end{document}
+%%
+%%
+%% End of file `EANControlDigit.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/GS1.pdf b/Master/texmf-dist/doc/latex/gs1/GS1.pdf
new file mode 100644
index 00000000000..9cb7557730a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/GS1.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/gs1/GSSetup.tex b/Master/texmf-dist/doc/latex/gs1/GSSetup.tex
new file mode 100644
index 00000000000..e0f2767af21
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/GSSetup.tex
@@ -0,0 +1,75 @@
+%%
+%% This is file `GSSetup.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,GSSetup')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\raggedright
+\verb|\EANBarcode{ISBN 978-3-86541-459-5}|:
+ \EANBarcode{ISBN 978-3-86541-459-5}
+
+\verb|\EANBarcode[add_control]{ISBN 978-3-86541-459-}|:
+ \EANBarcode[add_control]{ISBN 978-3-86541-459-}
+
+\verb|\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}|:
+\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}
+
+\verb|\EANBarcode[code=EAN-8]{20123451}|:
+ \EANBarcode[code=EAN-8]{20123451}
+
+\verb|\EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}|:
+ \EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}
+
+After \verb|\GSSetup{ocrb=false,add_control}|:
+ \GSSetup{ocrb=false,add_control}
+
+\verb|\EANBarcode[code=EAN-8]{2012345}|:
+ \EANBarcode[code=EAN-8]{2012345}
+
+\verb|\EANBarcode[code=EAN-8,ocrb,add_control=false]{20123451}|:
+ \EANBarcode[code=EAN-8,ocrb,add_control=false]{20123451}
+
+\end{document}
+%%
+%%
+%% End of file `GSSetup.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/GS_cut_EAN_control_digit.tex b/Master/texmf-dist/doc/latex/gs1/GS_cut_EAN_control_digit.tex
new file mode 100644
index 00000000000..d9de6d8852a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/GS_cut_EAN_control_digit.tex
@@ -0,0 +1,71 @@
+%%
+%% This is file `GS_cut_EAN_control_digit.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,GS.cut.EAN.control.digit')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\raggedright
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+With~control:~\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }\\
+\GS_set_code_digit_seq:Nn \l_testb_seq {ISBN 978-3-86541-459}
+\GS_cut_EAN_control_digit:N \l_testa_seq
+\seq_map_inline:Nn \l_testa_seq
+ {
+ \seq_pop_left:NN \l_testb_seq \l_tmpa_tl
+ \tl_set:Nn \l_tmpb_tl { #1 }
+ \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl
+ {
+ \tl_show:N \l_testa_seq
+ \tl_show:N \l_testb_seq
+ \msg_fatal:nnn { GS1/test } { function }
+ { \GS_cut_EAN_control_digit:N }
+ }
+ }
+Without~control:~\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }\\
+\ExplSyntaxOff
+\end{document}
+%%
+%%
+%% End of file `GS_cut_EAN_control_digit.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/GS_set_EAN_control_digit.tex b/Master/texmf-dist/doc/latex/gs1/GS_set_EAN_control_digit.tex
new file mode 100644
index 00000000000..900e14a1c1c
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/GS_set_EAN_control_digit.tex
@@ -0,0 +1,68 @@
+%%
+%% This is file `GS_set_EAN_control_digit.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,GS.set.EAN.control.digit')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+\seq_new:N \l_testb_tl
+\seq_pop_right:NN \l_testa_seq \l_testb_tl
+\GS_set_EAN_control_digit:N \l_testa_seq
+\tl_new:N \l_testa_tl
+\seq_get_right:NN \l_testa_seq \l_testa_tl
+Control~digit~should~be~ \tl_use:N \l_testb_tl {} ~
+\int_compare:nNnTF { \l_testa_tl } { = } { \l_testb_tl }
+ {
+ ~and~is~\tl_use:N \l_testa_tl .
+ }
+ {
+ ~but~it~\tl_use:N \t_testa_tl .
+ \msg_error:nnn { GS1/test } { function } { \GS_set_EAN_control_digit:N }
+ }
+\ExplSyntaxOff
+\end{document}
+%%
+%%
+%% End of file `GS_set_EAN_control_digit.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/GS_set_code_digit_seq.tex b/Master/texmf-dist/doc/latex/gs1/GS_set_code_digit_seq.tex
new file mode 100644
index 00000000000..1bb9dad5bbb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/GS_set_code_digit_seq.tex
@@ -0,0 +1,86 @@
+%%
+%% This is file `GS_set_code_digit_seq.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,GS.set.code.digit.seq')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\seq_new:N \l_testb_seq
+
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+Sequence~for~ISBN~978-3-86541-459-5~is:~
+\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }
+
+\GS_set_code_digit_seq:Nn \l_testb_seq {9783865414595}
+\seq_map_inline:Nn \l_testa_seq
+ {
+ \seq_pop_left:NN \l_testb_seq \l_tmpa_tl
+ \tl_set:Nn \l_tmpb_tl { #1 }
+ \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl
+ {
+ \tl_show:N l_testa_seq
+ \tl_show:N l_testb_seq
+ \msg_fatal:nnn { GS1/test } { function } { \GS_set_code_digit_seq:Nn }
+ }
+ }
+
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+\seq_set_split:Nnn \l_testb_seq {,} {9,7,8,3,8,6,5,4,1,4,5,9,5}
+\seq_map_inline:Nn \l_testa_seq
+ {
+ \seq_pop_left:NN \l_testb_seq \l_tmpa_tl
+ \tl_set:Nn \l_tmpb_tl { #1 }
+ \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl
+ {
+ \tl_show:N \l_testa_seq
+ \tl_show:N \l_testb_seq
+ \msg_fatal:nnn { GS1/test } { function } { \GS_set_code_digit_seq:Nn }
+ }
+ }
+
+\ExplSyntaxOff
+\end{document}
+%%
+%%
+%% End of file `GS_set_code_digit_seq.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/README b/Master/texmf-dist/doc/latex/gs1/README
new file mode 100644
index 00000000000..963e675af38
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/README
@@ -0,0 +1,25 @@
+$Id: README 1 2012-07-27 06:09:40Z mjk $
+============================================================================
+GS1 - l3-package for handling of GS1 codes of GS1 specification
+----------------------------------------------------------------------------
+Maintainer: Markus Kohm
+E-Mail: komascript at gmx info
+Abstract: Currently the package is able to
+ - calculate control digits for EAN-8 and EAN-13
+ - generate bar code for EAN-8 and EAN-13
+Requires: expl3 - stable packages of LaTeX3 kernel for LaTeX2e
+ xparse - definition of LaTeX2e user commands using LaTeX3
+ rule-D - see below
+License: LPPL 1.3c or later
+State: Author maintained
+============================================================================
+rule-D - l3-package simply providing LaTeX3 \rule functions
+----------------------------------------------------------------------------
+Maintainer: Markus Kohm
+E-Mail: komascript at gmx info
+Abstract: Currently there's no \rule command in expl3, but GS1 needs
+ it.
+Requires: expl3 - stable packages of LaTeX3 kernel for LaTeX2e
+License: LPPL 1.3c or later
+State: Author maintained
+============================================================================
diff --git a/Master/texmf-dist/doc/latex/gs1/int_set_to_EAN_control_digit.tex b/Master/texmf-dist/doc/latex/gs1/int_set_to_EAN_control_digit.tex
new file mode 100644
index 00000000000..907985809a6
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/int_set_to_EAN_control_digit.tex
@@ -0,0 +1,68 @@
+%%
+%% This is file `int_set_to_EAN_control_digit.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `test,int.set.to.EAN.control.digit')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\tl_new:N \l_control_tl
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+\seq_pop_right:NN \l_testa_seq \l_control_tl
+\int_new:N \l_control_int
+\int_set_to_EAN_control_digit:NN \l_control_int \l_testa_seq
+Control~digit~should~be~\tl_use:N \l_control_tl{} ~
+\int_compare:nNnTF { \l_control_tl } { = } { \l_control_int }
+ {
+ ~and~is~\int_use:N \l_control_int .
+ }
+ {
+ ~but~it~\int_use:N \l_control_int .
+ \msg_error:nnn { GS1/test } { function }
+ { \int_set_to_EAN_control_digit:NN }
+ }
+\ExplSyntaxOff
+\end{document}
+%%
+%%
+%% End of file `int_set_to_EAN_control_digit.tex'.
diff --git a/Master/texmf-dist/doc/latex/gs1/rule-D.pdf b/Master/texmf-dist/doc/latex/gs1/rule-D.pdf
new file mode 100644
index 00000000000..d228b0148dc
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gs1/rule-D.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/latex/gs1/GS1.dtx b/Master/texmf-dist/source/latex/gs1/GS1.dtx
new file mode 100644
index 00000000000..a69bbf41e83
--- /dev/null
+++ b/Master/texmf-dist/source/latex/gs1/GS1.dtx
@@ -0,0 +1,1033 @@
+% \iffalse meta-comment
+%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+%
+%<*driver|package|test>
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+%</driver|package|test>
+%<*driver>
+\documentclass{l3doc}
+\begin{document}
+ \DocInput{\jobname.dtx}
+\end{document}
+%</driver>
+%<*test>
+\documentclass{article}
+\usepackage{GS1}
+\ExplSyntaxOn
+\msg_new:nnn { GS1/test } { function }
+ {
+ Something~is~wrong~with~function~#1
+ \msg_line_context:~~of~\c_sys_jobname_str.tex.
+ }
+\ExplSyntaxOff
+\begin{document}
+%</test>
+% \fi
+%
+% \title{^^A
+% The \pkg{GS1}\thanks
+% {^^A
+% GS1 is a registered trademark of GS1 AISBL. Nevertheless, GS1 AISBL
+% neither has any rights on this package, nor is responsible for it in
+% any kind. The package's name should indicate only, that the package
+% implements some aspects of GS1 codes.^^A
+% }
+% package\\
+% GS1 Code Handler and Barcode Generator\thanks
+% {^^A
+% This file describes v\ExplFileVersion,
+% last revised \ExplFileDate.^^A
+% }^^A
+% }
+%
+% \author{^^A
+% Markus Kohm\thanks
+% {^^A
+% E-mail: \href{mailto:komascript@gmx.info}{komascript@gmx.info}^^A
+% }^^A
+% }
+%
+% \date{Released \ExplFileDate}
+%
+% \maketitle
+%
+% \begin{documentation}
+% \begin{abstract}
+% There are several barcode packages out in the world, but they either need
+% PStricks, or are restricted to EAN-13 barcodes. And most of all, they are
+% all \LaTeXe. I've decided to write a package, that supports several GS1
+% codes, and at almost the same time, I've decided to give L3 a chance. So
+% I've started an experimental GS1 package using \pkg{expl3}. Using
+% \pkg{expl3} was the main reason writing this package.
+% \end{abstract}
+%
+% \tableofcontents
+%
+% \section*{Preface}
+%
+% Design and implementation of this package based on
+% \begin{quote}\begin{description}
+% \item[GS1:] ``Allgemeine GS1 Spezifikation'', Version~12.0, Januar~2012,
+% Ausgabe~1.
+% \end{description}\end{quote}
+% This is the official GS1 specification for Germany, Austria and Switzerland.
+%
+% Currently only EAN-8 and EAN-13 codes and bar codes without extension have
+% been implemented. Others may follow in future.
+%
+%
+% \section{L3 Functions and Variables for GS1 Codes}
+% \label{sec:doc:functions.and.variables}
+%
+% First of all: Please note, that the concept of private functions and
+% variables is not well defined in \TeX. Several variables, that I'd have
+% made private in C++, haven't been declared to be private in this
+% implementation. Maybe I should change this.
+%
+% You should also know, that several test files may be created from the
+% package source, and each of those may be used as an example for using the
+% code. Nevertheless, \LaTeXe{} users will not need the following functions
+% and should continue reading with \autoref{sec:doc:latex2e}.
+%
+% \begin{function}{\GS_set_code_digit_seq:Nn}
+% \begin{syntax}
+% "\GS_set_code_digit_seq:Nn" \meta{GS1 sequence variable} \Arg{token list}
+% \end{syntax}
+% Makes a GS1 sequence, that consist in digits only, from a \meta{token
+% list}. To do so, only the tokens from 0 up to 9 of the \meta{token list}
+% are set to the \meta{GS1 sequence variable}. All other tokens are
+% ignored. So may, e.g., convert the string ``ISBN 978-3-86541-459-5'' into
+% a GS1 sequence with the digits ``9783865414595'', where each digit is one
+% item of the sequence.
+% \end{function}
+%
+% \begin{function}{\GS_cut_EAN_control_digit:N}
+% \begin{syntax}
+% "\GS_cut_EAN_control_digit:N" \meta{GS1 sequence variable}
+% \end{syntax}
+% The \meta{GS1 sequence variable} should store either a EAN-8 or EAN-13
+% code with or without control digit. If the code has seven or twelve
+% digits, nothing happens. If the code has eight or 13 digits, the last one
+% will be removed. All other cases result in an error message.
+% \end{function}
+%
+% \begin{function}{\GS_set_EAN_control_digit:N}
+% \begin{syntax}
+% "\GS_set_EAN_control_digit:N" \meta{GS1 sequence variable}
+% \end{syntax}
+% The \meta{GS1 sequence variable} should store either a EAN-8 or EAN-13
+% code with or without control digit. A new control digit will be
+% calculated. If the code has seven or twelve digits the new control digit
+% will be added. If the code has eight or 13 digits, the old control digit
+% will be replaced by the new one. All other cases result in an error
+% message.
+% \end{function}
+%
+% \begin{function}{\int_set_to_EAN_control_digit:NN}
+% \begin{syntax}
+% "\int_set_to_EAN_control_digit:NN" \meta{integer variable} \meta{GS1 sequence variable}
+% \end{syntax}
+% Calculates the control digit of the \meta{GS1 sequence variable} using the
+% EAN control digit algorithm and stores it into the \meta{integer
+% variable}. Note, that the \meta{GS1 sequence variable} may be a sequence
+% of digits of any length not only seven digits for EAN-8 or twelve digits
+% for EAN-13.
+% \end{function}
+%
+% \begin{function}{\GS_use_as_EAN_barcode:N}
+% \begin{syntax}
+% "\GS_use_as_EAN_barcode:N" \meta{GS1 sequence variable}
+% \end{syntax}
+% Prints an EAN-8 or EAN-13 bar code depending on
+% \cs{l_GS_code_size_int}. Note, that the \meta{GS1 sequence variable} may
+% have more than 8 resp. 13 items but not less! Use \cs{EANBarcode} if you
+% need a more save function.
+% \end{function}
+%
+%
+% \section{\LaTeXe{} User Interface for GS1 Codes}
+% \label{sec:doc:latex2e}
+%
+% This section describes the \LaTeXe-compatible user interface. Note, that
+% the test files \file{EANControlDigit.tex}, \file{EANBarcode.tex},
+% \file{GSSetup.tex}, and the resulting PDF files may be used as examples of
+% the following commands.
+%
+% \begin{function}{\EANControlDigit}
+% \begin{syntax}
+% "\EANControlDigit"\Arg{string}
+% \end{syntax}
+% Only the digits of the \meta{string} will be used. All other tokens
+% will be ignored. If the \meta{string} has 7 or 8 digits, the control
+% digit of an EAN-8 code will be calculated and output. If the
+% \meta{string} has 12 or 13 digits, the control digit of an EAN-13 code
+% will be calculated and output. If the \meta{string} has 8 or 13 digits
+% the last digit will be ignored. Any other number of digits will result in
+% an error message.
+% \end{function}
+%
+% \begin{function}{\EANBarcode}
+% \begin{syntax}
+% "\EANBarcode"\oarg{options}\Arg{string}
+% \end{syntax}
+% Creates the EAN bar code corresponding with \meta{string}. The optional
+% argument \meta{options} may be used to use different settings from the
+% defaults set by \cmd{\GSSetup}.
+%
+% Each digit of a EAN bar code is represented by seven modules. Each module
+% is either black or white. A black module is a black, vertical line. A
+% white module is just a gap. The seven modules start either with a black
+% sequence of up to four modules, followed by a white sequence of up to four
+% modules, followed by a black sequence of up to four modules, finished by a
+% white sequence of up to four modules, or they start with a white sequence
+% of up to four modules, followed by a black sequence of up to four modules,
+% followed by a white sequence of up to four modules, finished by a black
+% sequence of up to four modules.
+% \end{function}
+%
+% \begin{function}{\GSSetup}
+% \begin{syntax}
+% "\GSSetup" \Arg{options}
+% \end{syntax}
+% \meta{options} is a list of \meta{key}=\meta{value} pairs. They are used
+% to setup the default of several settings:
+% \begin{description}
+% \item[\texttt{ocrb=}\meta{boolean}]\hfill\\
+% If \meta{boolean} is \texttt{true} the digits at the bottom of the bar
+% code will be printed using OCR-b font ocrb/T1/m/n in 9pt. Predefined
+% default is |ocrb=true|.
+% \item[\texttt{module\_width=}\meta{dimension expression}]\hfill\\
+% This is the width of one module. GS1 specifies a minimum module width
+% of 0.264\,mm and a normal width of 0.33\,mm. You should not set a
+% width below the minimum!
+% \item[\texttt{module\_height=}\meta{dimension expression}]\hfill\\
+% This is the height of a black module. GS1 specifies a normal bar code
+% height of 21.31\,mm for EAN-8 and 25.01\,mm for EAN-13. Both values
+% are inclusive the digits at the bottom of the bar code. Some marker
+% modules are higher than the digit modules.
+% \item[\texttt{code=}\meta{string}]\hfill\\
+% The \meta{string} should either be \texttt{EAN-8} or \texttt{EAN-13}.
+% The predefined default is |EAN-13|. More types will be
+% supported in future.
+% \item[\texttt{scale=}\meta{floating point}]\hfill\\
+% This is the scale factor for the bar code. GS1 specifies scale classes
+% from 0.8 up to 2.0 with steps of 0.05. Factors less than 0.8
+% shouldn't be used. \emph{Currently \texttt{scale} won't be used!}
+% \item[\texttt{scale\_to\_font=}\meta{boolean}]\hfill\\
+% Ignore \texttt{module_width} and instead set the module width
+% depending on the width of digit 0 of the current font. Note, that
+% this will not scale the whole bar code but only the module width. To
+% scale the whole bar code, you should use \texttt{scale}.
+% \item[\texttt{add\_control=}\meta{boolean}]\hfill\\
+% Add the control digit to the GS1 code. If there's already a control
+% digit, replace it by the calculated one. The predefined default is
+% |add_control=false|.
+% \end{description}
+% \end{function}
+%
+%
+% \section{Internal Functions and Variables}
+% \label{sec:doc:internal}
+%
+% You should not use or manipulate these! So, maybe it's better to stop
+% reading now.
+%
+% \begin{function}{\__GS_set_key_code:nn}
+% \begin{syntax}
+% "\__GS_set_key_code:nn" \Arg{token list} \Arg{integer expression}
+% \end{syntax}
+% Sets \cs{l_GS_code_type_tl} to \meta{token list} and
+% \cs{l_GS_code_size_int} to value of \Arg{integer expression}.
+% \end{function}
+%
+% \begin{function}{\__GS_new_seq_c:cn}
+% \begin{syntax}
+% "\__GS_new_seq_c:cn" \Arg{sequence name} \Arg{token list}
+% \end{syntax}
+% Creates a sequence constant \cs{c__GS_\meta{sequence name}_seq}. The
+% value of the constant will be build by the tokens of the \meta{token
+% list}. These tokens should be either characters ``A'' or ``B'' for
+% selection constants or digits 1--4 for module constants.
+% \end{function}
+%
+% \begin{function}{\__GS_modules:Nn, \__GS_modules:cn, \__GS_modules:NnN}
+% \begin{syntax}
+% "\__GS_modules:Nn" \meta{sequence variable} \Arg{dimension expression}
+% "\__GS_modules:cn" \Arg{sequence variable name} \Arg{dimension expression}
+% "\__GS_modules:NnN" \meta{sequence variable} \Arg{dimension expression} \meta{boolean variable}
+% \end{syntax}
+% Draws the modules given by the \meta{sequence variable} with height
+% \Arg{dimension expression}. The arguments are:
+% \begin{arguments}
+% \item \meta{sequence variable} or \meta{sequence variable name}, each item
+% of the sequence stays for a number of modules with the same color.
+% \cs{l__GS_black_bool} signals, whether the (first) modules are black or
+% white and will be reversed after every item. Each module has the width
+% \cs{l_GS_module_wd_dim}.
+% \item \meta{dimension expression}, the height of the black modules. The
+% modules will be raised by \cs{l_GS_module_ht_dim}.
+% \item \meta{boolean variable}, \texttt{true} indicates, that the first
+% module should be black. With \texttt{false}, the first module will be
+% white.
+% \end{arguments}
+% \end{function}
+%
+% \begin{function}{\__GS_modules_start_black:Nn}
+% \begin{syntax}
+% "\__GS_modules_start_black:Nn" \meta{sequence variable} \Arg{dimension expression}
+% \end{syntax}
+% Same like \cs{__GS_modules:NnN} \meta{sequence variable} \Arg{dimension
+% expression} \cs{c_true_bool}.
+% \end{function}
+%
+% \begin{function}{\__GS_modules_start_white:Nn}
+% \begin{syntax}
+% "\__GS_modules_start_white:Nn" \meta{sequence variable} \Arg{dimension expression}
+% \end{syntax}
+% Same like \cs{__GS_modules:NnN} \meta{sequence variable} \Arg{dimension
+% expression} \cs{c_false_bool}.
+% \end{function}
+%
+% \end{documentation}
+%
+% \begin{implementation}
+%
+% \section{\pkg{GS1} implementation}
+% \label{sec:implementation}
+%
+% \begin{macrocode}
+%<@@=GS>
+% \end{macrocode}
+%
+% The implementation has been done in two parts. The first part is the L3
+% code with all the functions and variables. The second part is the
+% \LaTeXe{} lookalike user interface.
+%
+% But before this, we just declare, what this is:
+% \begin{macrocode}
+%<*package>
+\ProvidesExplPackage
+ {\ExplFileName}{\ExplFileDate}{\ExplFileVersion}{\ExplFileDescription}
+% \end{macrocode}
+% and what it requires:
+% \begin{macrocode}
+\RequirePackage{rule-D}
+%</package>
+% \end{macrocode}
+%
+% \subsection{Implementation of Functions and Variables}
+% \label{sec:impl:functions.and.variables}
+%
+% \subsubsection{Constants}
+% \label{sec:impl:constants}
+%
+% \begin{macro}{\__GS_new_seq_c:cn}
+% While this is an internal function, that should allow only some tokens at
+% the arguments, it is declared \texttt{nopar}.
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \@@_new_seq_c:cn #1#2
+ {
+ \seq_new:c {c@@_ #1 _seq}
+ \seq_set_split:Nnn \l_tmpa_seq {} {#2}
+ \seq_gset_eq:cN {c@@_ #1 _seq} \l_tmpa_seq
+ }
+%</package>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{variable}{\c__GS_AB0_seq, \c__GS_AB1_seq, \c__GS_AB2_seq,
+% \c__GS_AB3_seq, \c__GS_AB4_seq, \c__GS_AB5_seq, \c__GS_AB6_seq,
+% \c__GS_AB7_seq, \c__GS_AB8_seq, \c__GS_AB9_seq}
+% These constants represent the generation rules of the left side of an EAN-13
+% barcode. See figure~5.2.1.3.1-1 of the GS1 specification.
+% \begin{macrocode}
+%<*package>
+\@@_new_seq_c:cn {AB0} {AAAAAA}
+\@@_new_seq_c:cn {AB1} {AABABB}
+\@@_new_seq_c:cn {AB2} {AABBAB}
+\@@_new_seq_c:cn {AB3} {AABBBA}
+\@@_new_seq_c:cn {AB4} {ABAABB}
+\@@_new_seq_c:cn {AB5} {ABBAAB}
+\@@_new_seq_c:cn {AB6} {ABBBAA}
+\@@_new_seq_c:cn {AB7} {ABABAB}
+\@@_new_seq_c:cn {AB8} {ABABBA}
+\@@_new_seq_c:cn {AB9} {ABBABA}
+%</package>
+% \end{macrocode}
+% \end{variable}
+%
+% \begin{variable}{\c__GS_A0_seq, \c__GS_A1_seq, \c__GS_A2_seq, \c__GS_A3_seq,
+% \c__GS_A4_seq, \c__GS_A5_seq, \c__GS_A6_seq, \c__GS_A7_seq, \c__GS_A8_seq,
+% \c__GS_A9_seq, \c__GS_B0_seq, \c__GS_B1_seq, \c__GS_B2_seq, \c__GS_B3_seq,
+% \c__GS_B4_seq, \c__GS_B5_seq, \c__GS_B6_seq, \c__GS_B7_seq, \c__GS_B8_seq,
+% \c__GS_B9_seq, \c__GS_margin_seq, \c__GS_separator_seq, \c__GS_special_seq,
+% \c__GS_extra_margin_seq, \c__GS_extra_separator_seq}
+% These constants represent the module sequences of digits and markers. See
+% figure~5.2.1.2.1-1 and 5.2.1.2.2-1 of the GS1 specification. Note, that
+% the module sequences of type C are same like type A but start with a black
+% module instead of a white one.
+% \begin{macrocode}
+%<*package>
+\@@_new_seq_c:cn {A0} {3211} % start white (C0 same but start with black)
+\@@_new_seq_c:cn {A1} {2221}
+\@@_new_seq_c:cn {A2} {2122}
+\@@_new_seq_c:cn {A3} {1411}
+\@@_new_seq_c:cn {A4} {1132}
+\@@_new_seq_c:cn {A5} {1231}
+\@@_new_seq_c:cn {A6} {1114}
+\@@_new_seq_c:cn {A7} {1312}
+\@@_new_seq_c:cn {A8} {1213}
+\@@_new_seq_c:cn {A9} {3112}
+\@@_new_seq_c:cn {B0} {1123} % start white
+\@@_new_seq_c:cn {B1} {1222}
+\@@_new_seq_c:cn {B2} {2212}
+\@@_new_seq_c:cn {B3} {1141}
+\@@_new_seq_c:cn {B4} {2311}
+\@@_new_seq_c:cn {B5} {1321}
+\@@_new_seq_c:cn {B6} {4111}
+\@@_new_seq_c:cn {B7} {2131}
+\@@_new_seq_c:cn {B8} {3121}
+\@@_new_seq_c:cn {B9} {2113}
+\@@_new_seq_c:cn {margin} {111} % start black
+\@@_new_seq_c:cn {separator} {11111} % start white
+\@@_new_seq_c:cn {special} {111111} % start white
+\@@_new_seq_c:cn {extra_margin} {112} % start black
+\@@_new_seq_c:cn {extra_separator} {11} % start white
+%</package>
+% \end{macrocode}
+% \end{variable}
+%
+% There are some basic dimensions for the modules at the specification:
+% \begin{variable}{\c__GS_module_min_width_dim, \c__GS_module_norm_width_dim}
+% \begin{macrocode}
+%<*package>
+\dim_const:Nn \c_@@_module_min_width_dim {0.264mm}
+\dim_const:Nn \c_@@_module_norm_width_dim {0.33mm}
+%</package>
+% \end{macrocode}
+% \end{variable}
+%
+% \subsubsection{Settings and Variables}
+% \label{seq:impl.settings}
+%
+% These settings will influence the work of several of the user functions.
+% They are defined as keys of family \texttt{GS1}.
+%
+% \begin{variable}{ \l_GS_use_ocrb_bool, \l_GS_module_wd_dim,
+% \l_GS_module_ht_dim, \l_GS_scale_fp, \l_GS_scale_to_font_bool,
+% \l_GS_add_control_bool, \l_GS_code_type_tl, \l_GS_code_size_int }
+% \begin{macro}{\__GS_set_key_code:nn}
+% Needed to set both \cmd{\l_GS_code_type_tl} and \cmd{\l_GS_code_size_int}
+% with one key. Together they are the type of code, to be handled.
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \@@_set_key_code:nn #1#2
+ {
+ \tl_if_exist:NF \l_GS_code_type_tl { \tl_new:N \l_GS_code_type_tl }
+ \tl_set:Nn \l_GS_code_type_tl { #1 }
+ \int_if_exist:NF \l_GS_code_size_int { \int_new:N \l_GS_code_size_int }
+ \int_set:Nn \l_GS_code_size_int { #2 }
+ }
+% \end{macrocode}
+% \end{macro}
+% \begin{macrocode}
+\keys_define:nn { GS1 }
+ {
+ ocrb .bool_set:N = \l_GS_use_ocrb_bool,
+ ocrb .initial:n = true,
+ module_width .dim_set:N = \l_GS_module_wd_dim,
+ module_width .initial:V = \c_@@_module_norm_width_dim,
+ module_height .dim_set:N = \l_GS_module_ht_dim,
+ module_height .initial:V = \c_zero_dim,
+ code .choice:,
+ code / EAN-8 .code:n = { \@@_set_key_code:nn { EAN } { 8 } },
+ code / EAN8 .code:n = { \@@_set_key_code:nn { EAN } { 8 } },
+ code / EAN-13 .code:n = { \@@_set_key_code:nn { EAN } { 13 } },
+ code / EAN13 .code:n = { \@@_set_key_code:nn { EAN } { 13 } },
+ code .initial:n = EAN-13,
+ scale .fp_set:N = \l_GS_scale_fp,
+ scale .initial:n = 1.0,
+ scale_to_font .bool_set:N = \l_GS_scale_to_font_bool,
+ scale_to_font .initial:n = false,
+ add_control .bool_set:N = \l_GS_add_control_bool,
+ add_control .initial:n = false,
+ }
+%</package>
+% \end{macrocode}
+% \end{variable}
+%
+% Note: Later I'll define a \LaTeXe{} command to change the defaults of those
+% keys. Additionally local changes of those keys may be done using the
+% optional argument of the \LaTeXe{} user commands. See
+% \autoref{sec:impl:user.interface} for more information.
+%
+% \begin{variable}{\l__GS_code_seq}
+% This will be used later for several local GS1 sequences. It is private
+% and also shouldn't be used in global context.
+% \begin{macrocode}
+%<*package>
+\seq_new:N \l_@@_code_seq
+%</package>
+% \end{macrocode}
+% \end{variable}
+%
+% \subsubsection{Messages}
+% \label{seq:impl.messages}
+%
+% We need a message for not supported lengths of EAN codes, because currently
+% only EAN-8 and EAN-13 are supported, both with or without control
+% digit. This message will be used as an error message.
+% \begin{macrocode}
+%<*package>
+\msg_new:nnnn { GS1 } { EAN-code-size }
+ {
+ #1~isn't~a~valid~EAN~code~\msg_line_context:.
+ }
+ {
+ The~given~code~is~neither~a~EAN-8~with~or~without~control~digit,\\
+ nor~a~EAN-13~with~or~without~control~digit.\\\\
+ The~GS1~module~currently~only~supports~EAN-8~and~EAN~13.
+ }
+%</package>
+% \end{macrocode}
+%
+% Another message is only a warning message. It will be used whenever the used
+% module width would be less than the minimum module width given by the GS1
+% specification.
+% \begin{macrocode}
+%<*package>
+\msg_new:nnn { GS1 } { module/minwidth }
+ {
+ Resulting~module~width~is~less~than~allowed~minimum~\msg_line_context:.\\\\
+ GS1~specification~declares~a~minimum~module~width~of~#2.\\
+ Currently~the~module~with~would~be~#1.\\
+ To~avoid~problems,~I'll~increase~module~width~to~#2.
+ }
+%</package>
+% \end{macrocode}
+%
+% \subsubsection{Functions}
+% \label{seq:impl.functions}
+%
+% \begin{macro}{\GS_set_code_digit_seq:Nn}
+% Convert a string into a code sequence ignoring all but digits.
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \GS_set_code_digit_seq:Nn #1#2
+ {
+ \seq_set_eq:NN #1 \c_empty_seq
+ \tl_map_inline:nn
+ { #2 }
+ {
+ \tl_if_in:nnT
+ {0123456789}
+ {##1}
+ {
+ \seq_put_right:Nn #1 { ##1 }
+ }
+ }
+ }
+%</package>
+% \end{macrocode}
+%
+% \TestFiles{GS_set_code_digit.tex}\UnitTested
+% \begin{macrocode}
+%<*test&GS.set.code.digit.seq>
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\seq_new:N \l_testb_seq
+
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+Sequence~for~ISBN~978-3-86541-459-5~is:~
+\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }
+
+\GS_set_code_digit_seq:Nn \l_testb_seq {9783865414595}
+\seq_map_inline:Nn \l_testa_seq
+ {
+ \seq_pop_left:NN \l_testb_seq \l_tmpa_tl
+ \tl_set:Nn \l_tmpb_tl { #1 }
+ \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl
+ {
+ \tl_show:N l_testa_seq
+ \tl_show:N l_testb_seq
+ \msg_fatal:nnn { GS1/test } { function } { \GS_set_code_digit_seq:Nn }
+ }
+ }
+
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+\seq_set_split:Nnn \l_testb_seq {,} {9,7,8,3,8,6,5,4,1,4,5,9,5}
+\seq_map_inline:Nn \l_testa_seq
+ {
+ \seq_pop_left:NN \l_testb_seq \l_tmpa_tl
+ \tl_set:Nn \l_tmpb_tl { #1 }
+ \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl
+ {
+ \tl_show:N \l_testa_seq
+ \tl_show:N \l_testb_seq
+ \msg_fatal:nnn { GS1/test } { function } { \GS_set_code_digit_seq:Nn }
+ }
+ }
+
+\ExplSyntaxOff
+%</test&GS.set.code.digit.seq>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}[updated = 2017-07-15]{\GS_cut_EAN_control_digit:N}
+% \changes{v18}{2017/07/15}{replaced removed \cs{int_case:nnn} by
+% \cs{int_case:nnF}}^^A
+% EAN code sequences with control digit are either 8 or 13 digits. To
+% remove the control digit we just have to remove the right most digit from
+% a 8 or 13 digits sequence. 7 or 12 digit sequences are already without
+% control digit. All other sequences are not supported.
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \GS_cut_EAN_control_digit:N #1
+ {
+ \int_case:nnF
+ { \seq_count:N #1 }
+ {
+ { 7 } { }
+ { 8 } { \seq_pop_right:NN #1 \l_tempa_tl }
+ { 12 } { }
+ { 13 } { \seq_pop_right:NN #1 \l_tempa_tl }
+ }
+ {
+ \msg_error:nnn { GS1 } { EAN-code-size } { #1 }
+ }
+ }
+%</package>
+% \end{macrocode}
+%
+% \TestFiles{GS_cut_EAN_control_digit.tex}\UnitTested
+% \begin{macrocode}
+%<*test&GS.cut.EAN.control.digit>
+\raggedright
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+With~control:~\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }\\
+\GS_set_code_digit_seq:Nn \l_testb_seq {ISBN 978-3-86541-459}
+\GS_cut_EAN_control_digit:N \l_testa_seq
+\seq_map_inline:Nn \l_testa_seq
+ {
+ \seq_pop_left:NN \l_testb_seq \l_tmpa_tl
+ \tl_set:Nn \l_tmpb_tl { #1 }
+ \tl_if_eq:NNF \l_tmpa_tl \l_tmpb_tl
+ {
+ \tl_show:N \l_testa_seq
+ \tl_show:N \l_testb_seq
+ \msg_fatal:nnn { GS1/test } { function }
+ { \GS_cut_EAN_control_digit:N }
+ }
+ }
+Without~control:~\seq_use:Nnnn \l_testa_seq { ,~ } { ,~} { ,~ }\\
+\ExplSyntaxOff
+%</test&GS.cut.EAN.control.digit>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\int_set_to_EAN_control_digit:NN}
+% Sets an integer to the control digit calculated with the EAN control digit
+% algorithm for a given code sequence. Note, that the complete code
+% sequence will be used to calculate the control digit. So, if you have a
+% EAN-8 or EAN-13 code sequence, you should cut of the control digit first.
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \int_set_to_EAN_control_digit:NN #1#2
+ {
+ \int_zero:N #1
+ \seq_set_eq:NN \l_tmpa_seq #2
+ \bool_until_do:nn
+ { \seq_if_empty_p:N \l_tmpa_seq }
+ {
+ \seq_pop_left:NN \l_tmpa_seq \l_tmpb_tl
+ \int_if_even:nTF
+ { \seq_count:N \l_tmpa_seq }
+ {
+ \int_add:Nn #1 { 3 * \l_tmpb_tl }
+ }
+ {
+ \int_add:Nn #1 { \l_tmpb_tl }
+ }
+ }
+ \int_set:Nn #1 { \int_mod:nn { 10 - \int_mod:nn { #1 } { 10 } } { 10 } }
+ }
+%</package>
+% \end{macrocode}
+%
+% \TestFiles{int_set_to_EAN_control_digit.tex}\UnitTested
+% \begin{macrocode}
+%<*test&int.set.to.EAN.control.digit>
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\tl_new:N \l_control_tl
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+\seq_pop_right:NN \l_testa_seq \l_control_tl
+\int_new:N \l_control_int
+\int_set_to_EAN_control_digit:NN \l_control_int \l_testa_seq
+Control~digit~should~be~\tl_use:N \l_control_tl{} ~
+\int_compare:nNnTF { \l_control_tl } { = } { \l_control_int }
+ {
+ ~and~is~\int_use:N \l_control_int .
+ }
+ {
+ ~but~it~\int_use:N \l_control_int .
+ \msg_error:nnn { GS1/test } { function }
+ { \int_set_to_EAN_control_digit:NN }
+ }
+\ExplSyntaxOff
+%</test&int.set.to.EAN.control.digit>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\GS_set_EAN_control_digit:N}
+% Add a new control digit to a EAN sequence
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \GS_set_EAN_control_digit:N #1
+ {
+ \GS_cut_EAN_control_digit:N #1
+ \int_set_to_EAN_control_digit:NN \l_tmpa_int #1
+ \seq_put_right:NV #1 \l_tmpa_int
+ }
+%</package>
+% \end{macrocode}
+%
+% \TestFiles{GS_set_EAN_control_digit.tex}\UnitTested
+% \begin{macrocode}
+%<*test&GS.set.EAN.control.digit>
+\ExplSyntaxOn
+\seq_new:N \l_testa_seq
+\GS_set_code_digit_seq:Nn \l_testa_seq {ISBN 978-3-86541-459-5}
+\seq_new:N \l_testb_tl
+\seq_pop_right:NN \l_testa_seq \l_testb_tl
+\GS_set_EAN_control_digit:N \l_testa_seq
+\tl_new:N \l_testa_tl
+\seq_get_right:NN \l_testa_seq \l_testa_tl
+Control~digit~should~be~ \tl_use:N \l_testb_tl {} ~
+\int_compare:nNnTF { \l_testa_tl } { = } { \l_testb_tl }
+ {
+ ~and~is~\tl_use:N \l_testa_tl .
+ }
+ {
+ ~but~it~\tl_use:N \t_testa_tl .
+ \msg_error:nnn { GS1/test } { function } { \GS_set_EAN_control_digit:N }
+ }
+\ExplSyntaxOff
+%</test&GS.set.EAN.control.digit>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\__GS_modules:Nn, \__GS_modules:NnN, \__GS_modules:cn,
+% \__GS_modules_start_black:Nn, \__GS_modules_start_white:Nn}
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \@@_modules:Nn #1#2
+ {
+ \seq_map_inline:Nn #1
+ {
+ \bool_if:NTF \l_@@_black_bool
+ {
+ \bool_set_false:N \l_@@_black_bool
+ \hbox_set:Nn \l_tmpa_box { 0 }
+ \rule:nnn
+ {
+ \dim_eval:n
+ {
+ \box_ht:N \l_tmpa_box + \l_GS_module_wd_dim / 2
+ - \dim_eval:n { #2 } + \l_GS_module_ht_dim
+ }
+ }
+ { \dim_eval:n { \l_GS_module_wd_dim * ##1 } }
+ { \dim_eval:n { #2 } }
+ }
+ {
+ \bool_set_true:N \l_@@_black_bool
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * ##1 } { }
+ }
+ }
+ }
+
+\cs_new_nopar:Npn \@@_modules:NnN #1#2#3
+ {
+ \bool_if_exist:NF \l_@@_black_bool { \bool_new:N \l_@@_black_bool }
+ \bool_set_eq:NN \l_@@_black_bool #3
+ \@@_modules:Nn #1 { #2 }
+ }
+
+\cs_new_nopar:Npn \@@_modules_start_black:Nn #1#2
+ {
+ \@@_modules:NnN #1 { #2 } \c_true_bool
+ }
+
+\cs_new_nopar:Npn \@@_modules_start_white:Nn #1#2
+ {
+ \@@_modules:NnN #1 { #2 } \c_false_bool
+ }
+
+\cs_generate_variant:Nn \@@_modules:Nn { c }
+%</package>
+% \end{macrocode}
+% \TestFiles{EANBarcode.tex}\UnitTested
+% \end{macro}
+%
+% \begin{macro}{\GS_use_as_EAN_barcode:N}
+% Puts the digits, rules, and gaps for an EAN barcode into the input
+% stream.
+% \begin{macrocode}
+%<*package>
+\cs_new_nopar:Npn \GS_use_as_EAN_barcode:N #1
+ {
+ \seq_set_eq:NN \l_@@_code_seq #1
+
+ \int_compare:nNnTF { \l_GS_code_size_int } { = } { 8 }
+ {
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * 7 } { }
+ \seq_set_eq:Nc \l_GS_system_seq { c_@@_AB0_seq }
+ }
+ {
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * 11 } { }
+ \seq_pop_left:NN \l_@@_code_seq \l_tmpa_tl
+ \seq_set_eq:Nc \l_GS_system_seq { c_@@_AB \l_tmpa_tl _seq }
+ \hbox_overlap_left:n { \l_tmpa_tl }
+ }
+
+ \@@_modules_start_black:Nn \c_@@_margin_seq
+ { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 }
+
+ \int_step_inline:nnnn { 1 } { 1 }
+ { \int_div_truncate:nn { \l_GS_code_size_int } { 2 } }
+ {
+ \seq_pop_left:NN \l_@@_code_seq \l_tmpa_tl
+ \hbox_overlap_right:n { \l_tmpa_tl }
+ \seq_pop_left:NN \l_GS_system_seq \l_tmpb_tl
+ \@@_modules:cn { c_@@_ \l_tmpb_tl \l_tmpa_tl _seq }
+ { \l_GS_module_ht_dim }
+ }
+
+ \@@_modules_start_white:Nn \c_@@_separator_seq
+ { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 }
+
+ \int_step_inline:nnnn { 1 } { 1 }
+ { \int_div_truncate:nn { \l_GS_code_size_int } { 2 } }
+ {
+ \seq_pop_left:NN \l_@@_code_seq \l_tmpa_tl
+ \hbox_overlap_right:n { \l_tmpa_tl }
+ \@@_modules:cn { c_@@_A \l_tmpa_tl _seq }
+ { \l_GS_module_ht_dim }
+ }
+
+ \@@_modules_start_black:Nn \c__GS_margin_seq
+ { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 }
+
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * 7 } { }
+ }
+%</package>
+% \end{macrocode}
+% \TestFiles{EANBarcode.tex}\UnitTested
+% \end{macro}
+%
+%
+% \subsection{Implementation of the User Interface}
+% \label{sec:impl:user.interface}
+%
+% For this, additional packages are needed:
+% \begin{macrocode}
+%<*package>
+\RequirePackage{xparse}
+% \end{macrocode}
+%
+% \begin{macro}{\EANControlDigit}
+% \begin{macrocode}
+\NewDocumentCommand \EANControlDigit
+ { m }
+ {
+ \group_begin:
+ \GS_set_code_digit_seq:Nn \l_@@_code_seq { #1 }
+ \GS_cut_EAN_control_digit:N \l_@@_code_seq
+ \int_set_to_EAN_control_digit:NN \l_tmpa_int \l_@@_code_seq
+ \int_to_arabic:n { \l_tmpa_int }
+ \group_end:
+ }
+%</package>
+% \end{macrocode}
+% \TestFiles{EANControlDigit.tex}\UnitTested
+%
+% \begin{macrocode}
+%<*test&EANControlDigit>
+\begin{tabular}{ll}
+ \hline
+ Calculated & Known \\
+ \hline
+ 501234567890-\EANControlDigit{501234567890} & 501234567890-0 \\
+ ISBN 978-3-86541-459-\EANControlDigit{ISBN 978-3-86541-459} & ISBN
+ 978-3-86541-459-5 \\
+ EAN-8: 2012345\EANControlDigit{2012345} & EAN-8: 20123451 \\
+ \hline
+\end{tabular}
+%</test&EANControlDigit>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\EANBarcode}
+% \begin{macrocode}
+%<*package>
+\NewDocumentCommand \EANBarcode
+ { o m }
+ {
+ \group_begin:
+ \IfNoValueF{#1}{ \keys_set:nn { GS1 } { #1 } }
+ \dim_compare:nNnT { \l_GS_module_ht_dim } { = } { \c_zero_dim }
+ {
+ \int_compare:nNnTF { \l_GS_code_size_int } { = } { 8 }
+ { \dim_set:Nn \l_GS_module_ht_dim { 21.31 mm } }
+ { \dim_set:Nn \l_GS_module_ht_dim { 25.01 mm } }
+ }
+ \bool_if:nT \l_GS_use_ocrb_bool
+ {
+% \end{macrocode}
+% \textsc{ToDo:} Use \pkg{fontspec} if available.
+% \begin{macrocode}
+ \usefont{OT1}{ocrb}{m}{n}\fontsize{9}{9}\selectfont
+ }
+
+ \GS_set_code_digit_seq:Nn \l_@@_code_seq { #2 }
+
+ \bool_if:NT \l_GS_add_control_bool
+ {
+ \GS_set_EAN_control_digit:N \l_@@_code_seq
+ }
+
+ \int_compare:nNnT
+ { \seq_count:N \l__GS_code_seq }
+ { > }
+ { \l_GS_code_size_int }
+ {
+ \msg_error:nnn { GS1 } { EAN-code-size } { #2 }
+ }
+ \int_while_do:nNnn
+ { \seq_count:N \l_@@_code_seq }
+ { < }
+ { \l_GS_code_size_int }
+ {
+ \seq_put_left:Nn \l_@@_code_seq { 0 }
+ }
+
+ \bool_if:NT \l_GS_scale_to_font_bool {
+ \hbox_set:Nn \l_tmpa_box { 0 }
+ \dim_set:Nn \l_GS_module_wd_dim { \box_wd:N \l_tmpa_box / 7 }
+ }
+
+ \dim_set:Nn \l_tmpa_dim
+ { \fp_to_decimal:N \l_GS_scale_fp \l_GS_module_wd_dim }
+
+ \dim_compare:nNnT
+ { \l_tmpa_dim }
+ { < }
+ { \c_@@_module_min_width_dim }
+ {
+ \msg_warning:nnxx { GS1 } { module/minwidth }
+ { \dim_use:N \l_GS_module_wd_dim }
+ { \dim_use:N \c_@@_module_min_width_dim }
+ \dim_set:Nn \l_GS_module_wd_dim
+ {
+ \c_@@_module_min_width_dim *
+ 100 / \fp_to_int:n { 100 * \l_GS_scale_fp }
+ }
+ }
+
+ \hbox_set:Nn \l_tmpa_box { \GS_use_as_EAN_barcode:N \l_@@_code_seq }
+ \box_scale:Nnn \l_tmpa_box
+ { \fp_to_int:n { 100 * \l_GS_scale_fp } / 100 }
+ { \fp_to_int:n { 100 * \l_GS_scale_fp } / 100 }
+ \box_use:N \l_tmpa_box
+ \group_end:
+ }
+%</package>
+% \end{macrocode}
+% \TestFiles{EANBarcode.tex}\UnitTested
+%
+% \begin{macrocode}
+%<*test&EANBarcode|GSSetup>
+\raggedright
+\verb|\EANBarcode{ISBN 978-3-86541-459-5}|:
+ \EANBarcode{ISBN 978-3-86541-459-5}
+
+\verb|\EANBarcode[add_control]{ISBN 978-3-86541-459-}|:
+ \EANBarcode[add_control]{ISBN 978-3-86541-459-}
+
+\verb|\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}|:
+\EANBarcode[ocrb=false]{ISBN 978-3-86541-459-5}
+
+\verb|\EANBarcode[code=EAN-8]{20123451}|:
+ \EANBarcode[code=EAN-8]{20123451}
+
+\verb|\EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}|:
+ \EANBarcode[code=EAN-8,ocrb=false,add_control]{2012345}
+
+%</test&EANBarcode|GSSetup>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\GSSetup}
+% \begin{macrocode}
+%<*package>
+\NewDocumentCommand \GSSetup
+ { m }
+ { \keys_set:nn { GS1 } { #1 } }
+%</package>
+% \end{macrocode}
+%
+% \TestFiles{GSSetup.tex}\UnitTested
+% \begin{macrocode}
+%<*test&GSSetup>
+After \verb|\GSSetup{ocrb=false,add_control}|:
+ \GSSetup{ocrb=false,add_control}
+
+\verb|\EANBarcode[code=EAN-8]{2012345}|:
+ \EANBarcode[code=EAN-8]{2012345}
+
+\verb|\EANBarcode[code=EAN-8,ocrb,add_control=false]{20123451}|:
+ \EANBarcode[code=EAN-8,ocrb,add_control=false]{20123451}
+
+%</test&GSSetup>
+% \end{macrocode}
+% \end{macro}
+%
+% \iffalse
+%<*test>
+\end{document}
+%</test>
+% \fi
+% \end{implementation}
+%
+% \PrintIndex
+%
+\endinput
+%
+% end of file
+
+% \endinput
+% Local Variables:
+% mode: doctex
+% TeX-master: t
+% End:
diff --git a/Master/texmf-dist/source/latex/gs1/GS1.ins b/Master/texmf-dist/source/latex/gs1/GS1.ins
new file mode 100644
index 00000000000..22b68ee22b8
--- /dev/null
+++ b/Master/texmf-dist/source/latex/gs1/GS1.ins
@@ -0,0 +1,79 @@
+\iffalse meta-comment
+
+File: GS1.ins Copyright (C) 2012 Markus Kohm
+
+It may be distributed and/or modified under the conditions of the
+LaTeX Project Public License (LPPL), either version 1.3c of this
+license or (at your option) any later version. The latest version
+of this license is in the file
+
+ http://www.latex-project.org/lppl.txt
+
+This file is part of the "GS1 bundle" (The Work in LPPL)
+and all files in that bundle must be distributed together.
+
+The released version of this bundle is available from CTAN.
+
+$Id: GS1.ins 9 2012-08-01 09:31:32Z mjk $
+
+\fi
+
+\input l3docstrip.tex
+\askforoverwritefalse
+
+\preamble
+
+EXPERIMENTAL CODE
+
+This Work depends on the correct version of expl3 release. If
+you'll update expl3 you may need a update of this this Work too.
+
+Do not distribute this file without also distributing the
+source files specified above.
+
+Do not distribute modified version of this file.
+
+\endpreamble
+% stop docstrip adding \endinput
+\postamble
+\endpostamble
+
+\keepsilent
+
+\generate{%
+ \file{GS1.sty} {\from{GS1.dtx} {package}}%
+ % A lot of test files, that may be used as an example too:
+ \file{GS_set_code_digit_seq.tex}
+ {%
+ \from{GS1.dtx} {test,GS.set.code.digit.seq}%
+ }%
+ \file{GS_cut_EAN_control_digit.tex}
+ {%
+ \from{GS1.dtx} {test,GS.cut.EAN.control.digit}%
+ }%
+ \file{int_set_to_EAN_control_digit.tex}
+ {%
+ \from{GS1.dtx} {test,int.set.to.EAN.control.digit}%
+ }%
+ \file{GS_set_EAN_control_digit.tex}
+ {%
+ \from{GS1.dtx} {test,GS.set.EAN.control.digit}%
+ }%
+ \file{EANControlDigit.tex}
+ {%
+ \from{GS1.dtx} {test,EANControlDigit}%
+ }%
+ \file{EANBarcode.tex}
+ {%
+ \from{GS1.dtx} {test,EANBarcode}%
+ }%
+ \file{GSSetup.tex}
+ {%
+ \from{GS1.dtx} {test,GSSetup}%
+ }%
+}
+\generate{%
+ \file{rule-D.sty} {\from{rule-D.dtx} {package}}%
+}
+
+\endbatchfile
diff --git a/Master/texmf-dist/source/latex/gs1/rule-D.dtx b/Master/texmf-dist/source/latex/gs1/rule-D.dtx
new file mode 100644
index 00000000000..98cd347dfeb
--- /dev/null
+++ b/Master/texmf-dist/source/latex/gs1/rule-D.dtx
@@ -0,0 +1,136 @@
+% \iffalse meta-comment
+%
+%% File: rule-D.dtx Copyright (C) 2017-2021 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+%
+%<*driver|package>
+\RequirePackage{expl3}[2019/01/17]
+\GetIdInfo$Id: rule-D.dtx 23 2021-06-17 07:00:36Z mjk $
+ {rule functions for LaTeX3}
+%</driver|package>
+%<*driver>
+\documentclass{l3doc}
+\begin{document}
+ \DocInput{\jobname.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \title{^^A
+% The \pkg{rule-D} Package\\
+% Rule Functions\thanks
+% {^^A
+% This file describes v\ExplFileVersion,
+% last revised \ExplFileDate.^^A
+% }^^A
+% }
+%
+% \author{^^A
+% Markus Kohm\thanks
+% {^^A
+% E-mail: \href{mailto:komascript@gmx.info}{komascript@gmx.info}^^A
+% }^^A
+% }
+%
+% \date{Released \ExplFileDate}
+%
+% \maketitle
+%
+% \begin{documentation}
+% At \LaTeXe{} you have command \cmd{\rule} to make horizontal and vertical
+% rules and even boxes. Currently there's no L3 command for this. This
+% module provides two new L3 functions for rules. The ``-D'' in the module
+% name indicates, that currently the implementation uses deprecated
+% functions like \cmd{\tex_vrule:D}. Nevertheless, the new rule functions
+% aren't declared to be deprecated.
+%
+% This package has been made only, because \pkg{GS1} needs such rule
+% functions. So maybe it's simply a helper package for \pkg{GS1}.
+%
+%
+% \begin{function}{\rule:nn , \rule:nnn}
+% \begin{syntax}
+% "\rule:nnn" \Arg{dimexpr_{raise}} \Arg{dimexpr_{width}}^^A
+% \Arg{dimexpr_{height}}
+% "\rule:nn" \Arg{dimexpr_{width}} \Arg{dimexpr_{height}}
+% \end{syntax}
+% Draw a rule of width \meta{dimexpr_{width}}, height
+% \meta{dimexpr_{height}} and raise it by \meta{dimexpr_{raise}}. It the
+% \meta{dimex_{raise}} has not been given, the rule will be drawn at the
+% base line.
+% \end{function}
+%
+% \end{documentation}
+%
+% \begin{implementation}
+%
+% \section{\pkg{rule-D} implementation}
+% \label{sec:rule-D:implementation}
+%
+% \begin{macrocode}
+%<*package>
+%<@@=rule>
+% \end{macrocode}
+%
+% First of all we have to setup package information:
+% \begin{macrocode}
+\ProvidesExplPackage
+ {rule-D} {\ExplFileDate} {\ExplFileVersion}
+ {experimental~L3~rule~functions}
+% \end{macrocode}
+%
+% \begin{macro}[updated = 2021-06-17]{\rule:nn , \rule:nnn}
+% \begin{macrocode}
+\cs_new:Npn \rule:nn #1#2
+ {
+ \rule:nnn { \c_zero_dim } { #1 } { #2 }
+ }
+\cs_new:Npn \rule:nnn #1#2#3
+ {
+% \end{macrocode}
+% \changes{v23}{2021/06/17}{deprecated \cs{hbox_unpack_clear} replaced by
+% \cs{hbox_unpack_drop}}
+% Following line is same like \cs{leavevmode}, but it's \LaTeX3 instead of
+% plain\TeX.
+% \begin{macrocode}
+ \hbox_unpack_drop:N \c_empty_box
+ \hbox:n
+ {
+ \tex_vrule:D width \dim_eval:n { #2 }
+ height \dim_eval:n { #1 + #3 }
+ depth -\dim_eval:n { #1 }
+ }
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+%
+% \end{implementation}
+%
+% \PrintIndex
+%
+\endinput
+%
+% end of file
+
+% \endinput
+% Local Variables:
+% mode: doctex
+% TeX-master: t
+% End:
diff --git a/Master/texmf-dist/tex/latex/gs1/GS1.sty b/Master/texmf-dist/tex/latex/gs1/GS1.sty
new file mode 100644
index 00000000000..223c9ce5c6d
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/gs1/GS1.sty
@@ -0,0 +1,355 @@
+%%
+%% This is file `GS1.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% GS1.dtx (with options: `package')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: GS1.dtx Copyright (C) 2012-2017 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2017/05/29]
+\GetIdInfo$Id: GS1.dtx 23 2021-06-17 07:00:36Z mjk $
+ {GS1 code handler and barcode generator}
+\ProvidesExplPackage
+ {\ExplFileName}{\ExplFileDate}{\ExplFileVersion}{\ExplFileDescription}
+\RequirePackage{rule-D}
+\cs_new_nopar:Npn \__GS_new_seq_c:cn #1#2
+ {
+ \seq_new:c {c__GS_ #1 _seq}
+ \seq_set_split:Nnn \l_tmpa_seq {} {#2}
+ \seq_gset_eq:cN {c__GS_ #1 _seq} \l_tmpa_seq
+ }
+\__GS_new_seq_c:cn {AB0} {AAAAAA}
+\__GS_new_seq_c:cn {AB1} {AABABB}
+\__GS_new_seq_c:cn {AB2} {AABBAB}
+\__GS_new_seq_c:cn {AB3} {AABBBA}
+\__GS_new_seq_c:cn {AB4} {ABAABB}
+\__GS_new_seq_c:cn {AB5} {ABBAAB}
+\__GS_new_seq_c:cn {AB6} {ABBBAA}
+\__GS_new_seq_c:cn {AB7} {ABABAB}
+\__GS_new_seq_c:cn {AB8} {ABABBA}
+\__GS_new_seq_c:cn {AB9} {ABBABA}
+\__GS_new_seq_c:cn {A0} {3211} % start white (C0 same but start with black)
+\__GS_new_seq_c:cn {A1} {2221}
+\__GS_new_seq_c:cn {A2} {2122}
+\__GS_new_seq_c:cn {A3} {1411}
+\__GS_new_seq_c:cn {A4} {1132}
+\__GS_new_seq_c:cn {A5} {1231}
+\__GS_new_seq_c:cn {A6} {1114}
+\__GS_new_seq_c:cn {A7} {1312}
+\__GS_new_seq_c:cn {A8} {1213}
+\__GS_new_seq_c:cn {A9} {3112}
+\__GS_new_seq_c:cn {B0} {1123} % start white
+\__GS_new_seq_c:cn {B1} {1222}
+\__GS_new_seq_c:cn {B2} {2212}
+\__GS_new_seq_c:cn {B3} {1141}
+\__GS_new_seq_c:cn {B4} {2311}
+\__GS_new_seq_c:cn {B5} {1321}
+\__GS_new_seq_c:cn {B6} {4111}
+\__GS_new_seq_c:cn {B7} {2131}
+\__GS_new_seq_c:cn {B8} {3121}
+\__GS_new_seq_c:cn {B9} {2113}
+\__GS_new_seq_c:cn {margin} {111} % start black
+\__GS_new_seq_c:cn {separator} {11111} % start white
+\__GS_new_seq_c:cn {special} {111111} % start white
+\__GS_new_seq_c:cn {extra_margin} {112} % start black
+\__GS_new_seq_c:cn {extra_separator} {11} % start white
+\dim_const:Nn \c__GS_module_min_width_dim {0.264mm}
+\dim_const:Nn \c__GS_module_norm_width_dim {0.33mm}
+\cs_new_nopar:Npn \__GS_set_key_code:nn #1#2
+ {
+ \tl_if_exist:NF \l_GS_code_type_tl { \tl_new:N \l_GS_code_type_tl }
+ \tl_set:Nn \l_GS_code_type_tl { #1 }
+ \int_if_exist:NF \l_GS_code_size_int { \int_new:N \l_GS_code_size_int }
+ \int_set:Nn \l_GS_code_size_int { #2 }
+ }
+\keys_define:nn { GS1 }
+ {
+ ocrb .bool_set:N = \l_GS_use_ocrb_bool,
+ ocrb .initial:n = true,
+ module_width .dim_set:N = \l_GS_module_wd_dim,
+ module_width .initial:V = \c__GS_module_norm_width_dim,
+ module_height .dim_set:N = \l_GS_module_ht_dim,
+ module_height .initial:V = \c_zero_dim,
+ code .choice:,
+ code / EAN-8 .code:n = { \__GS_set_key_code:nn { EAN } { 8 } },
+ code / EAN8 .code:n = { \__GS_set_key_code:nn { EAN } { 8 } },
+ code / EAN-13 .code:n = { \__GS_set_key_code:nn { EAN } { 13 } },
+ code / EAN13 .code:n = { \__GS_set_key_code:nn { EAN } { 13 } },
+ code .initial:n = EAN-13,
+ scale .fp_set:N = \l_GS_scale_fp,
+ scale .initial:n = 1.0,
+ scale_to_font .bool_set:N = \l_GS_scale_to_font_bool,
+ scale_to_font .initial:n = false,
+ add_control .bool_set:N = \l_GS_add_control_bool,
+ add_control .initial:n = false,
+ }
+\seq_new:N \l__GS_code_seq
+\msg_new:nnnn { GS1 } { EAN-code-size }
+ {
+ #1~isn't~a~valid~EAN~code~\msg_line_context:.
+ }
+ {
+ The~given~code~is~neither~a~EAN-8~with~or~without~control~digit,\\
+ nor~a~EAN-13~with~or~without~control~digit.\\\\
+ The~GS1~module~currently~only~supports~EAN-8~and~EAN~13.
+ }
+\msg_new:nnn { GS1 } { module/minwidth }
+ {
+ Resulting~module~width~is~less~than~allowed~minimum~\msg_line_context:.\\\\
+ GS1~specification~declares~a~minimum~module~width~of~#2.\\
+ Currently~the~module~with~would~be~#1.\\
+ To~avoid~problems,~I'll~increase~module~width~to~#2.
+ }
+\cs_new_nopar:Npn \GS_set_code_digit_seq:Nn #1#2
+ {
+ \seq_set_eq:NN #1 \c_empty_seq
+ \tl_map_inline:nn
+ { #2 }
+ {
+ \tl_if_in:nnT
+ {0123456789}
+ {##1}
+ {
+ \seq_put_right:Nn #1 { ##1 }
+ }
+ }
+ }
+\cs_new_nopar:Npn \GS_cut_EAN_control_digit:N #1
+ {
+ \int_case:nnF
+ { \seq_count:N #1 }
+ {
+ { 7 } { }
+ { 8 } { \seq_pop_right:NN #1 \l_tempa_tl }
+ { 12 } { }
+ { 13 } { \seq_pop_right:NN #1 \l_tempa_tl }
+ }
+ {
+ \msg_error:nnn { GS1 } { EAN-code-size } { #1 }
+ }
+ }
+\cs_new_nopar:Npn \int_set_to_EAN_control_digit:NN #1#2
+ {
+ \int_zero:N #1
+ \seq_set_eq:NN \l_tmpa_seq #2
+ \bool_until_do:nn
+ { \seq_if_empty_p:N \l_tmpa_seq }
+ {
+ \seq_pop_left:NN \l_tmpa_seq \l_tmpb_tl
+ \int_if_even:nTF
+ { \seq_count:N \l_tmpa_seq }
+ {
+ \int_add:Nn #1 { 3 * \l_tmpb_tl }
+ }
+ {
+ \int_add:Nn #1 { \l_tmpb_tl }
+ }
+ }
+ \int_set:Nn #1 { \int_mod:nn { 10 - \int_mod:nn { #1 } { 10 } } { 10 } }
+ }
+\cs_new_nopar:Npn \GS_set_EAN_control_digit:N #1
+ {
+ \GS_cut_EAN_control_digit:N #1
+ \int_set_to_EAN_control_digit:NN \l_tmpa_int #1
+ \seq_put_right:NV #1 \l_tmpa_int
+ }
+\cs_new_nopar:Npn \__GS_modules:Nn #1#2
+ {
+ \seq_map_inline:Nn #1
+ {
+ \bool_if:NTF \l__GS_black_bool
+ {
+ \bool_set_false:N \l__GS_black_bool
+ \hbox_set:Nn \l_tmpa_box { 0 }
+ \rule:nnn
+ {
+ \dim_eval:n
+ {
+ \box_ht:N \l_tmpa_box + \l_GS_module_wd_dim / 2
+ - \dim_eval:n { #2 } + \l_GS_module_ht_dim
+ }
+ }
+ { \dim_eval:n { \l_GS_module_wd_dim * ##1 } }
+ { \dim_eval:n { #2 } }
+ }
+ {
+ \bool_set_true:N \l__GS_black_bool
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * ##1 } { }
+ }
+ }
+ }
+
+\cs_new_nopar:Npn \__GS_modules:NnN #1#2#3
+ {
+ \bool_if_exist:NF \l__GS_black_bool { \bool_new:N \l__GS_black_bool }
+ \bool_set_eq:NN \l__GS_black_bool #3
+ \__GS_modules:Nn #1 { #2 }
+ }
+
+\cs_new_nopar:Npn \__GS_modules_start_black:Nn #1#2
+ {
+ \__GS_modules:NnN #1 { #2 } \c_true_bool
+ }
+
+\cs_new_nopar:Npn \__GS_modules_start_white:Nn #1#2
+ {
+ \__GS_modules:NnN #1 { #2 } \c_false_bool
+ }
+
+\cs_generate_variant:Nn \__GS_modules:Nn { c }
+\cs_new_nopar:Npn \GS_use_as_EAN_barcode:N #1
+ {
+ \seq_set_eq:NN \l__GS_code_seq #1
+
+ \int_compare:nNnTF { \l_GS_code_size_int } { = } { 8 }
+ {
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * 7 } { }
+ \seq_set_eq:Nc \l_GS_system_seq { c__GS_AB0_seq }
+ }
+ {
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * 11 } { }
+ \seq_pop_left:NN \l__GS_code_seq \l_tmpa_tl
+ \seq_set_eq:Nc \l_GS_system_seq { c__GS_AB \l_tmpa_tl _seq }
+ \hbox_overlap_left:n { \l_tmpa_tl }
+ }
+
+ \__GS_modules_start_black:Nn \c__GS_margin_seq
+ { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 }
+
+ \int_step_inline:nnnn { 1 } { 1 }
+ { \int_div_truncate:nn { \l_GS_code_size_int } { 2 } }
+ {
+ \seq_pop_left:NN \l__GS_code_seq \l_tmpa_tl
+ \hbox_overlap_right:n { \l_tmpa_tl }
+ \seq_pop_left:NN \l_GS_system_seq \l_tmpb_tl
+ \__GS_modules:cn { c__GS_ \l_tmpb_tl \l_tmpa_tl _seq }
+ { \l_GS_module_ht_dim }
+ }
+
+ \__GS_modules_start_white:Nn \c__GS_separator_seq
+ { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 }
+
+ \int_step_inline:nnnn { 1 } { 1 }
+ { \int_div_truncate:nn { \l_GS_code_size_int } { 2 } }
+ {
+ \seq_pop_left:NN \l__GS_code_seq \l_tmpa_tl
+ \hbox_overlap_right:n { \l_tmpa_tl }
+ \__GS_modules:cn { c__GS_A \l_tmpa_tl _seq }
+ { \l_GS_module_ht_dim }
+ }
+
+ \__GS_modules_start_black:Nn \c__GS_margin_seq
+ { \l_GS_module_ht_dim + \l_GS_module_wd_dim * 5 }
+
+ \hbox_to_wd:nn { \l_GS_module_wd_dim * 7 } { }
+ }
+\RequirePackage{xparse}
+\NewDocumentCommand \EANControlDigit
+ { m }
+ {
+ \group_begin:
+ \GS_set_code_digit_seq:Nn \l__GS_code_seq { #1 }
+ \GS_cut_EAN_control_digit:N \l__GS_code_seq
+ \int_set_to_EAN_control_digit:NN \l_tmpa_int \l__GS_code_seq
+ \int_to_arabic:n { \l_tmpa_int }
+ \group_end:
+ }
+\NewDocumentCommand \EANBarcode
+ { o m }
+ {
+ \group_begin:
+ \IfNoValueF{#1}{ \keys_set:nn { GS1 } { #1 } }
+ \dim_compare:nNnT { \l_GS_module_ht_dim } { = } { \c_zero_dim }
+ {
+ \int_compare:nNnTF { \l_GS_code_size_int } { = } { 8 }
+ { \dim_set:Nn \l_GS_module_ht_dim { 21.31 mm } }
+ { \dim_set:Nn \l_GS_module_ht_dim { 25.01 mm } }
+ }
+ \bool_if:nT \l_GS_use_ocrb_bool
+ {
+ \usefont{OT1}{ocrb}{m}{n}\fontsize{9}{9}\selectfont
+ }
+
+ \GS_set_code_digit_seq:Nn \l__GS_code_seq { #2 }
+
+ \bool_if:NT \l_GS_add_control_bool
+ {
+ \GS_set_EAN_control_digit:N \l__GS_code_seq
+ }
+
+ \int_compare:nNnT
+ { \seq_count:N \l__GS_code_seq }
+ { > }
+ { \l_GS_code_size_int }
+ {
+ \msg_error:nnn { GS1 } { EAN-code-size } { #2 }
+ }
+ \int_while_do:nNnn
+ { \seq_count:N \l__GS_code_seq }
+ { < }
+ { \l_GS_code_size_int }
+ {
+ \seq_put_left:Nn \l__GS_code_seq { 0 }
+ }
+
+ \bool_if:NT \l_GS_scale_to_font_bool {
+ \hbox_set:Nn \l_tmpa_box { 0 }
+ \dim_set:Nn \l_GS_module_wd_dim { \box_wd:N \l_tmpa_box / 7 }
+ }
+
+ \dim_set:Nn \l_tmpa_dim
+ { \fp_to_decimal:N \l_GS_scale_fp \l_GS_module_wd_dim }
+
+ \dim_compare:nNnT
+ { \l_tmpa_dim }
+ { < }
+ { \c__GS_module_min_width_dim }
+ {
+ \msg_warning:nnxx { GS1 } { module/minwidth }
+ { \dim_use:N \l_GS_module_wd_dim }
+ { \dim_use:N \c__GS_module_min_width_dim }
+ \dim_set:Nn \l_GS_module_wd_dim
+ {
+ \c__GS_module_min_width_dim *
+ 100 / \fp_to_int:n { 100 * \l_GS_scale_fp }
+ }
+ }
+
+ \hbox_set:Nn \l_tmpa_box { \GS_use_as_EAN_barcode:N \l__GS_code_seq }
+ \box_scale:Nnn \l_tmpa_box
+ { \fp_to_int:n { 100 * \l_GS_scale_fp } / 100 }
+ { \fp_to_int:n { 100 * \l_GS_scale_fp } / 100 }
+ \box_use:N \l_tmpa_box
+ \group_end:
+ }
+\NewDocumentCommand \GSSetup
+ { m }
+ { \keys_set:nn { GS1 } { #1 } }
+%%
+%%
+%% End of file `GS1.sty'.
diff --git a/Master/texmf-dist/tex/latex/gs1/rule-D.sty b/Master/texmf-dist/tex/latex/gs1/rule-D.sty
new file mode 100644
index 00000000000..e5ee017e215
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/gs1/rule-D.sty
@@ -0,0 +1,56 @@
+%%
+%% This is file `rule-D.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% rule-D.dtx (with options: `package')
+%%
+%% EXPERIMENTAL CODE
+%%
+%% This Work depends on the correct version of expl3 release. If
+%% you'll update expl3 you may need a update of this this Work too.
+%%
+%% Do not distribute this file without also distributing the
+%% source files specified above.
+%%
+%% Do not distribute modified version of this file.
+%%
+%% File: rule-D.dtx Copyright (C) 2017-2021 Markus Kohm
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version. The latest version
+%% of this license is in the file
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the "GS1 bundle" (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -------------------------------------------------------------------------
+\RequirePackage{expl3}[2019/01/17]
+\GetIdInfo$Id: rule-D.dtx 23 2021-06-17 07:00:36Z mjk $
+ {rule functions for LaTeX3}
+\ProvidesExplPackage
+ {rule-D} {\ExplFileDate} {\ExplFileVersion}
+ {experimental~L3~rule~functions}
+\cs_new:Npn \rule:nn #1#2
+ {
+ \rule:nnn { \c_zero_dim } { #1 } { #2 }
+ }
+\cs_new:Npn \rule:nnn #1#2#3
+ {
+ \hbox_unpack_drop:N \c_empty_box
+ \hbox:n
+ {
+ \tex_vrule:D width \dim_eval:n { #2 }
+ height \dim_eval:n { #1 + #3 }
+ depth -\dim_eval:n { #1 }
+ }
+ }
+%%
+%%
+%% End of file `rule-D.sty'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index bdcddeec323..83ee990e1f6 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -20,7 +20,7 @@ our %OPT;
my @TLP_working = qw(
12many 2up
- Asana-Math ESIEEcv GS1 HA-prosper IEEEconf IEEEtran
+ Asana-Math ESIEEcv HA-prosper IEEEconf IEEEtran
SIstyle SIunits Tabbing Type1fonts
a0poster a2ping a4wide a5comb
aaai-named aalok aastex abbr abc abnt abntex2 abraces abstract abstyles
@@ -371,7 +371,7 @@ my @TLP_working = qw(
greekdates greektex greektonoi greenpoint gregoriotex
grfext grffile grfpaste
grid grid-system gridpapers gridset gridslides grotesq grundgesetze
- gsemthesis gtl gtrlib-largetrees gtrcrd
+ gs1 gsemthesis gtl gtrlib-largetrees gtrcrd
gu gudea guitar guitarchordschemes guitartabs guitlogo gzt
h2020proposal hackthefootline hacm hagenberg-thesis halloweenmath
handin handout hands hang hanging hanoi
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index f70d5b12520..55b611934f8 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -60,6 +60,7 @@ chomp (my $ctan_root = `tlpkginfo --ctan-root`);
'Einfuehrung', "die 'skipping, use einfuehrung (lowercase)'",
'FAQ-en', "die 'skipping, obsolete'",
'FiXme', "die 'skipping, use fixme'",
+ 'GS1', "die 'skipping, use gs1'",
'GuIT', "die 'skipping, use guitlogo'",
'HA-prosper', '&MAKEhaprosper',
'IEEEtran', "&MAKEIEEEtran",
@@ -594,7 +595,6 @@ chomp (my $ctan_root = `tlpkginfo --ctan-root`);
'grnumalt', "die 'skipping, nonfree'",
'grtimes', "die 'skipping, requires nonfree monotype times'",
'grverb', "die 'skipping, nonfree restriction on Crete U. Press'",
- 'gs1', "die 'skipping, use GS1'",
'gudea', "&MAKEflatten",
'guide-latex-fr', "die 'skipping, nonfree cc-nc-nd'",
'guitbeamer', "die 'skipping, nonfree'",
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index d786e9e9877..ee21edcdf5d 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -7,7 +7,6 @@ depend collection-pictures
#
depend 2up
depend ESIEEcv
-depend GS1
depend HA-prosper
depend Tabbing
depend a0poster
@@ -586,6 +585,7 @@ depend grid-system
depend gridpapers
depend gridset
depend gridslides
+depend gs1
depend guitlogo
depend halloweenmath
depend hackthefootline
diff --git a/Master/tlpkg/tlpsrc/gs1.tlpsrc b/Master/tlpkg/tlpsrc/gs1.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/gs1.tlpsrc