buctthesis (28jul22)

git-svn-id: svn://tug.org/texlive/trunk@64004 c570f23f-e606-0410-a88d-b1316a301751

35 files changed, 565 insertions, 2001 deletions

diff --git a/Master/texmf-dist/doc/latex/buctthesis/AddBib.png b/Master/texmf-dist/doc/latex/buctthesis/AddBib.png
deleted file mode 100644
index 3ed15fb86d4..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/AddBib.png
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/BUCT-badge.pdf b/Master/texmf-dist/doc/latex/buctthesis/BUCT-badge.pdf
deleted file mode 100644
index 663feec77f9..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/BUCT-badge.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/ChangeLog.md b/Master/texmf-dist/doc/latex/buctthesis/ChangeLog.md
deleted file mode 100644
index 32ad1ee5564..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/ChangeLog.md
+++ /dev/null
@@ -1,171 +0,0 @@
-# Changelog of BUCTthesis
-在这里记录 BUCTthesis 中较为重要的改动。
-
-## v1.2 - 2021/09/10
-
-### Added
-
-- 增加 `fontset` 选项，从而可在非 Windows 系统下选择**中文**字库。
-
-### Fixed
-
-- 封面的下划线现在支持动态调整，具体长度与标题首行相等
-- 英文摘要中的论文标题现在能正确换行了，且调整了垂直间距
-
-## v1.1 - 2021/03/29
-
-**本版本提交至CTAN**
-
-### Added
-
-- 增加论文封面，仅支持硕博
-
-## v1.0 - 2021/02/18
-
-### Added
-
-- 增加硕博论文模板，`\documentclass[]{buctthesis}` 必须指定类型
-
-### Fixed
-
-- `denotation` 环境第二列宽的默认值的单位修正
-- 本科中文摘要的关键词中，字体都使用中易黑体
-
-### Deleted
-
-- 模板发行版中取消 `blank` 文件夹，建议写作时直接在示例文件中修改
-
-## Beta.v0.9.6 - 2020/12/10
-
-### Added
-
-- 启用 `DocStrip`，增加文件 `buctthesis.dtx` 和 `buctthesis.ins`，以后将说明将在 `buctthesis.pdf` 查看；同时对示例文件进行大幅更改
-- `\buctsetup` 命令中增加一个 `studentid` 键
-- “诚信声明” 现在使用 `\makedeclare` 命令：其后可跟一个可选参数，参数为扫描页的路径
-
-### Changed
-
-- 自定义命令的 `myconfig.tex` 文件更改为 `mycfg.sty`
-- 更改了 `\buctsetup` 命令中的键名称大小写
-- 调整“任务书”中部分垂直间距，并在“进度安排”的表格里画上了竖线
-- 重排“摘要”部分，且现在中英文摘要只能排在不同页上
-- 设计图纸： `\designfig` -> `\dcaption`；以前需要在 `\caption` 后跟上 `\designfig` ，现在简化成了一个命令 `\dcaption`
-- `denotation` 环境现在只接受一个参数，控制第二列宽度
-
-### Deleted
-
-- 删除了校徽和校名的插图
-- 删除公式编号中“式”字
-- 删除 `declare` 、 `abstract*` 和 `abstracten*`环境
-
-## Beta.v0.9.5 - 2020/08/17
-
-### Added
-
-- 文档类选项 `openany` | `openright` ，适用于单双页打印：前者为原先设置；而后者会在适当之处插入一完全空白页，使得章页右开
-- 现在多余的文档类选项将传递至 `ctexbook`
-
-### Changed
-
-- 重写字体配置，修改字体切换的命令：粗体、黑体等有所变化
-- 微调双面摘要的垂直间距
-- 文档类选项 `TextBlack` 重命名为 `submit`
-- 代码的标签编号以 `-` 而不是 `.` 连接，形如 `代码 2-1`
-- “任务书”中，插入论文信息部分命令修改为带可选星号的 `\taskinfo` 命令。原定义 `\taskinfo` -> `\taskinfo*` ，`\Taskinfo` -> `\taskinfo`。类似于“摘要”的环境，带星号的是按照《规范》来定义的，无星号的则是为了应对一些变化
-- 修改了数学公式中的字体
-
-### Deleted
-
-- 删除文档类选项 `LessTOC` ，代之以相应位置的 PDF 书签
-- 删除了“符号说明”中表格的表头
-- 删除了 `dcolumn` 宏包，其功能与 `siunitx` 有所重合
-
-## Beta.v0.9.4 - 2020/06/08
-
-### Changed
-
-- 格式控制从宏包改为文档类
-- 主文件 `buctthesis.tex` 更名为 `main.tex` ，并将“诚信声明” `declare.tex` 、“任务书” `taskbook.tex` 和“摘要” `abstract.tex` 整合成一个文件 `frontmatter.tex`
-- “任务书”部分代码简化
-- 英文摘要关键词的字体改为中易黑体
-- 将“前言”编入 `\frontmatter` 里，将“第一章”设置为第一页
-
-### Added
-
-- 主文件中增加 `\buctsetup` 命令，代替以往的多个 `\def` 来存储论文的相关信息
-- 以 `threeparttable` 宏包来排版有脚注的表格
-- 以 `gbt7714` 宏包控制参考文献格式
-
-### Deleted
-
-- 删除原先的参考文献格式控制文件 `gbt7714-2005.bst`
-
-## Beta.v0.9.3 - 2020/04/08
-
-### Changed
-
-- 脚注：修复正文里脚注标记与前后文字的间距问题；脚注文字固定在页面底部且跨页重置计数
-- 使用 `unicode-math` 宏包来配置数学字体
-- `\emph{}` `\em` 命令：中文改用加粗的宋体而非楷体，西文改用粗体而非斜体
-
-### Deleted
-
-- 删除了算法的宏包，根据需要自行在 `myconfig.tex` 中调用
-- 删除 `bm` 宏包
-
-### Added
-
-- 新增“任务书”部分
-- 新文件 `myconfig.tex`，用于装载宏包或自定义命令
-- 使用 `pdfpages` 宏包的相关命令来插入扫描PDF，可替换诚信声明、摘要页等
-- 新环境 `dfigure` ，用于排版机械专业的设计图纸，在主文件的生成目录命令后使用  `\listofdesignfigures` 产生“设计图纸目录”；原定义 `\designfig` 仍然可以在普通插图中使用，但效果不同
-
-## Beta.v0.9.2 - 2020/03/14
-
-### Changed
-
-- 重构宏包代码，重排了部分文本。
-- 取消等宽字体的使用，一律使用 Times New Roman，并稍微修改了代码环境
-- 现在使用 `\cite{}` 实现上标引用参考文献
-- 现在使用 `subcaption` 宏包来插入并列子图，而 `subfigure` 宏包好久没更新了
-- 一级编号列表环境的序号改变了样式
-- 修改章节标题间距、缩短插图后的间距，列表环境现在改为正常的行间距
-- 章、节、小节标题一律使用加粗的宋体，浮动体标签和数学定理内容改为宋体
-- “诚信申明”改为“诚信声明”；修正了“前言”的拼写错误
-- 在“结论”这一章标题中间加上了一个全角空格
-- 简化了“符号说明”的代码
-
-### Deleted
-
-- 删除了在上个版本在摘要部分加入的作者及导师信息
-- 删除参考文献的文件 bibliography.tex，简化原来的代码并移动至主文件
-- 删除了一些宏包
-
-### Added
-
-- 宏包载入多了选项：`TextBlack` 用于将超链接全部设置为黑色，`LessTOC` 将会取消将“第一章”之前的所有内容编目（这与《规范》的示例相同）
-
-## Beta.v0.9.1 - 2020/02/06
-
-### Changed
-
-- 正文字号修正
-- 摘要同页排版的环境（ `abstract*` 与 `abstracten*` ），关键词的代码( `\keywords` 和 `\keywordsen` ）和格式
-- 行距调整至近似 Microsoft Word 中 22 磅
-- 修改节标题的前间距、小节标题的前后间距
-- 代码环境，关键字增设粗体、环境背景颜色减弱至浅灰色的10%
-- 修改目录部分的缩进
-- 改用数字带圈圈的脚注
-- 修改列表环境的间距
-- 删除了部分数学类的环境
-- 更改了hyperref宏包设置，凸显超链接以便于查看
-
-### Added
-
-- 摘要部分的作者（ `\author` 和 `\authoren` ）、导师（ `\thesupervisor` 和 `\thesupervisoren` ）等信息
-- 增加“设计图纸”编入目录的命令 `\designfig`
-- 增加了化学类的宏包、算法的宏包
-
-## Beta.v0.9.0 - 2020/01/23
-
-The first version. Hello World!
diff --git a/Master/texmf-dist/doc/latex/buctthesis/LICENSE b/Master/texmf-dist/doc/latex/buctthesis/LICENSE
deleted file mode 100644
index 4db9b5af292..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/LICENSE
+++ /dev/null
@@ -1,415 +0,0 @@
-The LaTeX Project Public License
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
-LPPL Version 1.3c  2008-05-04
-
-Copyright 1999 2002-2008 LaTeX3 Project
-    Everyone is allowed to distribute verbatim copies of this
-    license document, but modification of it is not allowed.
-
-
-PREAMBLE
-========
-
-The LaTeX Project Public License (LPPL) is the primary license under
-which the LaTeX kernel and the base LaTeX packages are distributed.
-
-You may use this license for any work of which you hold the copyright
-and which you wish to distribute.  This license may be particularly
-suitable if your work is TeX-related (such as a LaTeX package), but 
-it is written in such a way that you can use it even if your work is 
-unrelated to TeX.
-
-The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
-below, gives instructions, examples, and recommendations for authors
-who are considering distributing their works under this license.
-
-This license gives conditions under which a work may be distributed
-and modified, as well as conditions under which modified versions of
-that work may be distributed.
-
-We, the LaTeX3 Project, believe that the conditions below give you
-the freedom to make and distribute modified versions of your work
-that conform with whatever technical specifications you wish while
-maintaining the availability, integrity, and reliability of
-that work.  If you do not see how to achieve your goal while
-meeting these conditions, then read the document `cfgguide.tex'
-and `modguide.tex' in the base LaTeX distribution for suggestions.
-
-
-DEFINITIONS
-===========
-
-In this license document the following terms are used:
-
-   `Work'
-    Any work being distributed under this License.
-    
-   `Derived Work'
-    Any work that under any applicable law is derived from the Work.
-
-   `Modification' 
-    Any procedure that produces a Derived Work under any applicable
-    law -- for example, the production of a file containing an
-    original file associated with the Work or a significant portion of
-    such a file, either verbatim or with modifications and/or
-    translated into another language.
-
-   `Modify'
-    To apply any procedure that produces a Derived Work under any
-    applicable law.
-    
-   `Distribution'
-    Making copies of the Work available from one person to another, in
-    whole or in part.  Distribution includes (but is not limited to)
-    making any electronic components of the Work accessible by
-    file transfer protocols such as FTP or HTTP or by shared file
-    systems such as Sun's Network File System (NFS).
-
-   `Compiled Work'
-    A version of the Work that has been processed into a form where it
-    is directly usable on a computer system.  This processing may
-    include using installation facilities provided by the Work,
-    transformations of the Work, copying of components of the Work, or
-    other activities.  Note that modification of any installation
-    facilities provided by the Work constitutes modification of the Work.
-
-   `Current Maintainer'
-    A person or persons nominated as such within the Work.  If there is
-    no such explicit nomination then it is the `Copyright Holder' under
-    any applicable law.
-
-   `Base Interpreter' 
-    A program or process that is normally needed for running or
-    interpreting a part or the whole of the Work.    
-
-    A Base Interpreter may depend on external components but these
-    are not considered part of the Base Interpreter provided that each
-    external component clearly identifies itself whenever it is used
-    interactively.  Unless explicitly specified when applying the
-    license to the Work, the only applicable Base Interpreter is a
-    `LaTeX-Format' or in the case of files belonging to the 
-    `LaTeX-format' a program implementing the `TeX language'.
-
-
-
-CONDITIONS ON DISTRIBUTION AND MODIFICATION
-===========================================
-
-1.  Activities other than distribution and/or modification of the Work
-are not covered by this license; they are outside its scope.  In
-particular, the act of running the Work is not restricted and no
-requirements are made concerning any offers of support for the Work.
-
-2.  You may distribute a complete, unmodified copy of the Work as you
-received it.  Distribution of only part of the Work is considered
-modification of the Work, and no right to distribute such a Derived
-Work may be assumed under the terms of this clause.
-
-3.  You may distribute a Compiled Work that has been generated from a
-complete, unmodified copy of the Work as distributed under Clause 2
-above, as long as that Compiled Work is distributed in such a way that
-the recipients may install the Compiled Work on their system exactly
-as it would have been installed if they generated a Compiled Work
-directly from the Work.
-
-4.  If you are the Current Maintainer of the Work, you may, without
-restriction, modify the Work, thus creating a Derived Work.  You may
-also distribute the Derived Work without restriction, including
-Compiled Works generated from the Derived Work.  Derived Works
-distributed in this manner by the Current Maintainer are considered to
-be updated versions of the Work.
-
-5.  If you are not the Current Maintainer of the Work, you may modify
-your copy of the Work, thus creating a Derived Work based on the Work,
-and compile this Derived Work, thus creating a Compiled Work based on
-the Derived Work.
-
-6.  If you are not the Current Maintainer of the Work, you may
-distribute a Derived Work provided the following conditions are met
-for every component of the Work unless that component clearly states
-in the copyright notice that it is exempt from that condition.  Only
-the Current Maintainer is allowed to add such statements of exemption 
-to a component of the Work. 
-
-  a. If a component of this Derived Work can be a direct replacement
-     for a component of the Work when that component is used with the
-     Base Interpreter, then, wherever this component of the Work
-     identifies itself to the user when used interactively with that
-     Base Interpreter, the replacement component of this Derived Work
-     clearly and unambiguously identifies itself as a modified version
-     of this component to the user when used interactively with that
-     Base Interpreter.
-     
-  b. Every component of the Derived Work contains prominent notices
-     detailing the nature of the changes to that component, or a
-     prominent reference to another file that is distributed as part
-     of the Derived Work and that contains a complete and accurate log
-     of the changes.
-  
-  c. No information in the Derived Work implies that any persons,
-     including (but not limited to) the authors of the original version
-     of the Work, provide any support, including (but not limited to)
-     the reporting and handling of errors, to recipients of the
-     Derived Work unless those persons have stated explicitly that
-     they do provide such support for the Derived Work.
-
-  d. You distribute at least one of the following with the Derived Work:
-
-       1. A complete, unmodified copy of the Work; 
-          if your distribution of a modified component is made by
-          offering access to copy the modified component from a
-          designated place, then offering equivalent access to copy
-          the Work from the same or some similar place meets this
-          condition, even though third parties are not compelled to
-          copy the Work along with the modified component;
-
-       2. Information that is sufficient to obtain a complete,
-          unmodified copy of the Work.
-
-7.  If you are not the Current Maintainer of the Work, you may
-distribute a Compiled Work generated from a Derived Work, as long as
-the Derived Work is distributed to all recipients of the Compiled
-Work, and as long as the conditions of Clause 6, above, are met with
-regard to the Derived Work.
-
-8.  The conditions above are not intended to prohibit, and hence do not
-apply to, the modification, by any method, of any component so that it
-becomes identical to an updated version of that component of the Work as
-it is distributed by the Current Maintainer under Clause 4, above.
-
-9.  Distribution of the Work or any Derived Work in an alternative
-format, where the Work or that Derived Work (in whole or in part) is
-then produced by applying some process to that format, does not relax or
-nullify any sections of this license as they pertain to the results of
-applying that process.
-     
-10. a. A Derived Work may be distributed under a different license
-       provided that license itself honors the conditions listed in
-       Clause 6 above, in regard to the Work, though it does not have
-       to honor the rest of the conditions in this license.
-      
-    b. If a Derived Work is distributed under a different license, that
-       Derived Work must provide sufficient documentation as part of
-       itself to allow each recipient of that Derived Work to honor the 
-       restrictions in Clause 6 above, concerning changes from the Work.
-
-11. This license places no restrictions on works that are unrelated to
-the Work, nor does this license place any restrictions on aggregating
-such works with the Work by any means.
-
-12.  Nothing in this license is intended to, or may be used to, prevent
-complete compliance by all parties with all applicable laws.
-
-
-NO WARRANTY
-===========
-
-There is no warranty for the Work.  Except when otherwise stated in
-writing, the Copyright Holder provides the Work `as is', without
-warranty of any kind, either expressed or implied, including, but not
-limited to, the implied warranties of merchantability and fitness for a
-particular purpose.  The entire risk as to the quality and performance
-of the Work is with you.  Should the Work prove defective, you assume
-the cost of all necessary servicing, repair, or correction.
-
-In no event unless required by applicable law or agreed to in writing
-will The Copyright Holder, or any author named in the components of the
-Work, or any other party who may distribute and/or modify the Work as
-permitted above, be liable to you for damages, including any general,
-special, incidental or consequential damages arising out of any use of
-the Work or out of inability to use the Work (including, but not limited
-to, loss of data, data being rendered inaccurate, or losses sustained by
-anyone as a result of any failure of the Work to operate with any other
-programs), even if the Copyright Holder or said author or said other
-party has been advised of the possibility of such damages.
-
-
-MAINTENANCE OF THE WORK
-=======================
-
-The Work has the status `author-maintained' if the Copyright Holder
-explicitly and prominently states near the primary copyright notice in
-the Work that the Work can only be maintained by the Copyright Holder
-or simply that it is `author-maintained'.
-
-The Work has the status `maintained' if there is a Current Maintainer
-who has indicated in the Work that they are willing to receive error
-reports for the Work (for example, by supplying a valid e-mail
-address). It is not required for the Current Maintainer to acknowledge
-or act upon these error reports.
-
-The Work changes from status `maintained' to `unmaintained' if there
-is no Current Maintainer, or the person stated to be Current
-Maintainer of the work cannot be reached through the indicated means
-of communication for a period of six months, and there are no other
-significant signs of active maintenance.
-
-You can become the Current Maintainer of the Work by agreement with
-any existing Current Maintainer to take over this role.
-
-If the Work is unmaintained, you can become the Current Maintainer of
-the Work through the following steps:
-
- 1.  Make a reasonable attempt to trace the Current Maintainer (and
-     the Copyright Holder, if the two differ) through the means of
-     an Internet or similar search.
-
- 2.  If this search is successful, then enquire whether the Work
-     is still maintained.
-
-  a. If it is being maintained, then ask the Current Maintainer
-     to update their communication data within one month.
-     
-  b. If the search is unsuccessful or no action to resume active
-     maintenance is taken by the Current Maintainer, then announce
-     within the pertinent community your intention to take over
-     maintenance.  (If the Work is a LaTeX work, this could be
-     done, for example, by posting to comp.text.tex.)
-
- 3a. If the Current Maintainer is reachable and agrees to pass
-     maintenance of the Work to you, then this takes effect
-     immediately upon announcement.
-     
-  b. If the Current Maintainer is not reachable and the Copyright
-     Holder agrees that maintenance of the Work be passed to you,
-     then this takes effect immediately upon announcement.  
-    
- 4.  If you make an `intention announcement' as described in 2b. above
-     and after three months your intention is challenged neither by
-     the Current Maintainer nor by the Copyright Holder nor by other
-     people, then you may arrange for the Work to be changed so as
-     to name you as the (new) Current Maintainer.
-     
- 5.  If the previously unreachable Current Maintainer becomes
-     reachable once more within three months of a change completed
-     under the terms of 3b) or 4), then that Current Maintainer must
-     become or remain the Current Maintainer upon request provided
-     they then update their communication data within one month.
-
-A change in the Current Maintainer does not, of itself, alter the fact
-that the Work is distributed under the LPPL license.
-
-If you become the Current Maintainer of the Work, you should
-immediately provide, within the Work, a prominent and unambiguous
-statement of your status as Current Maintainer.  You should also
-announce your new status to the same pertinent community as
-in 2b) above.
-
-
-WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
-======================================================
-
-This section contains important instructions, examples, and
-recommendations for authors who are considering distributing their
-works under this license.  These authors are addressed as `you' in
-this section.
-
-Choosing This License or Another License
-----------------------------------------
-
-If for any part of your work you want or need to use *distribution*
-conditions that differ significantly from those in this license, then
-do not refer to this license anywhere in your work but, instead,
-distribute your work under a different license.  You may use the text
-of this license as a model for your own license, but your license
-should not refer to the LPPL or otherwise give the impression that
-your work is distributed under the LPPL.
-
-The document `modguide.tex' in the base LaTeX distribution explains
-the motivation behind the conditions of this license.  It explains,
-for example, why distributing LaTeX under the GNU General Public
-License (GPL) was considered inappropriate.  Even if your work is
-unrelated to LaTeX, the discussion in `modguide.tex' may still be
-relevant, and authors intending to distribute their works under any
-license are encouraged to read it.
-
-A Recommendation on Modification Without Distribution
------------------------------------------------------
-
-It is wise never to modify a component of the Work, even for your own
-personal use, without also meeting the above conditions for
-distributing the modified component.  While you might intend that such
-modifications will never be distributed, often this will happen by
-accident -- you may forget that you have modified that component; or
-it may not occur to you when allowing others to access the modified
-version that you are thus distributing it and violating the conditions
-of this license in ways that could have legal implications and, worse,
-cause problems for the community.  It is therefore usually in your
-best interest to keep your copy of the Work identical with the public
-one.  Many works provide ways to control the behavior of that work
-without altering any of its licensed components.
-
-How to Use This License
------------------------
-
-To use this license, place in each of the components of your work both
-an explicit copyright notice including your name and the year the work
-was authored and/or last substantially modified.  Include also a
-statement that the distribution and/or modification of that
-component is constrained by the conditions in this license.
-
-Here is an example of such a notice and statement:
-
-  %% pig.dtx
-  %% Copyright 2005 M. Y. Name
-  %
-  % This work may be distributed and/or modified under the
-  % conditions of the LaTeX Project Public License, either version 1.3
-  % of this license or (at your option) any later version.
-  % The latest version of this license is in
-  %   http://www.latex-project.org/lppl.txt
-  % and version 1.3 or later is part of all distributions of LaTeX
-  % version 2005/12/01 or later.
-  %
-  % This work has the LPPL maintenance status `maintained'.
-  % 
-  % The Current Maintainer of this work is M. Y. Name.
-  %
-  % This work consists of the files pig.dtx and pig.ins
-  % and the derived file pig.sty.
-
-Given such a notice and statement in a file, the conditions
-given in this license document would apply, with the `Work' referring
-to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
-generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
-referring to any `LaTeX-Format', and both `Copyright Holder' and
-`Current Maintainer' referring to the person `M. Y. Name'.
-
-If you do not want the Maintenance section of LPPL to apply to your
-Work, change `maintained' above into `author-maintained'.  
-However, we recommend that you use `maintained', as the Maintenance
-section was added in order to ensure that your Work remains useful to
-the community even when you can no longer maintain and support it
-yourself.
-
-Derived Works That Are Not Replacements
----------------------------------------
-
-Several clauses of the LPPL specify means to provide reliability and
-stability for the user community. They therefore concern themselves
-with the case that a Derived Work is intended to be used as a
-(compatible or incompatible) replacement of the original Work. If
-this is not the case (e.g., if a few lines of code are reused for a
-completely different task), then clauses 6b and 6d shall not apply.
-
-
-Important Recommendations
--------------------------
-
- Defining What Constitutes the Work
-
-   The LPPL requires that distributions of the Work contain all the
-   files of the Work.  It is therefore important that you provide a
-   way for the licensee to determine which files constitute the Work.
-   This could, for example, be achieved by explicitly listing all the
-   files of the Work near the copyright notice of each file or by
-   using a line such as:
-
-    % This work consists of all files listed in manifest.txt.
-   
-   in that place.  In the absence of an unequivocal list it might be
-   impossible for the licensee to determine what is considered by you
-   to comprise the Work and, in such a case, the licensee would be
-   entitled to make reasonable conjectures as to which files comprise
-   the Work.
diff --git a/Master/texmf-dist/doc/latex/buctthesis/acknowledgement.tex b/Master/texmf-dist/doc/latex/buctthesis/acknowledgement.tex
deleted file mode 100644
index b7d6c7e0a56..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/acknowledgement.tex
+++ /dev/null
@@ -1,8 +0,0 @@
-%% 致谢--acknowledgement.tex
-\begin{acknowledgement}
-	致谢部分。
-
-	\dots
-
-	%最后还要感谢 BUCTthesis 帮助我节省了论文排版的时间！
-\end{acknowledgement}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/app1.tex b/Master/texmf-dist/doc/latex/buctthesis/app1.tex
deleted file mode 100644
index 0e755c62e92..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/app1.tex
+++ /dev/null
@@ -1,57 +0,0 @@
-%% 附录第一章--app1.tex
-\chapter{这里是附录}\label{app:1}
-未尽事宜可将其列在附录中加以说明。论文有关的数据表、符号说明、计算程序、运行结果、
-主要设备、仪器仪表的性能指标和测试分析结果、精度等均可列在附录中。
-\section{附录的节}
-与正文类似。
-\begin{table}[ht]
-	\centering
-	\caption{测试表格}\label{tab:mytable}
-	\begin{tabular}{cc}
-		\toprule
-		a & B   \\
-		\midrule
-		甲   & 乙丙丁 \\
-		\bottomrule
-	\end{tabular}
-\end{table}
-
-\subsection{附录的小节}
-\zhlipsum[1][name = zhufu]
-
-\begin{figure}[ht]
-	\centering
-	\begin{minipage}{0.4\textwidth}
-		\centering
-		\includegraphics[height=4cm]{image-a.pdf}
-		\caption{第一张图}\label{fig:test1}
-	\end{minipage}
-	\hspace{1cm}
-	\begin{minipage}{0.4\textwidth}
-		\centering
-		\includegraphics[height=4cm]{image-c.pdf}
-		\caption{第二张图}\label{fig:test2}
-	\end{minipage}
-\end{figure}
-
-\zhlipsum[name = xiangyu]
-
-\begin{dfigure}[tbp]
-	\centering\includegraphics[height=.9\textwidth ,angle=-90]{worm-gear.pdf}
-	\caption{设计图纸测试}
-\end{dfigure}
-
-\zhlipsum[1][name = aspirin]
-
-\begin{equation}
-	a^2+b^3=c^4
-\end{equation}
-
-\begin{definition}
-	这是定义。\footnote{这是测试脚注。}
-\end{definition}
-
-\begin{lstlisting}[language=c++,caption=一个测试,label=mycode]
-#define mian main
-	\end{lstlisting}
-
diff --git a/Master/texmf-dist/doc/latex/buctthesis/buctcover.tex b/Master/texmf-dist/doc/latex/buctthesis/buctcover.tex
deleted file mode 100644
index dd8ef95e93c..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/buctcover.tex
+++ /dev/null
@@ -1,23 +0,0 @@
-% !TeX encoding = UTF-8
-\documentclass[
-	type = master    % type = [ master | doctor ]（不支持本科）
-]{buctcover}
-\coversetup{
-	%%%%% 各选项之间不要留有空行，并以西文逗号“,”分隔 %%%%%
-	% 学号，位于右上角
-	studentid = {2021010234},
-	% 标题。封面的标题有两行，每一行控制在 18 个汉字长度以内
-	titleA = {一二三四五六七八九十甲乙丙},
-	titleB = {丁戊己庚辛壬癸一二三四五六},
-	% 作者
-	author = {张三},
-	% 专业
-	major  = {计算机科学与技术},
-	% 导师
-	supervisor = {某某某教授},
-	% 日期，若注释掉则为当日。格式为：“YYYY-MM-DD”。
-	date = {2021-12-23},
-}
-\begin{document}
-	\makecover
-\end{document}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/buctthesis.pdf b/Master/texmf-dist/doc/latex/buctthesis/buctthesis.pdf
deleted file mode 100644
index 72c0e5976aa..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/buctthesis.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/chapter1.tex b/Master/texmf-dist/doc/latex/buctthesis/chapter1.tex
deleted file mode 100644
index 806f9417b88..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/chapter1.tex
+++ /dev/null
@@ -1,270 +0,0 @@
-%% 第一章--chapter1.tex
-\chapter{绪论}
-\section{字体}
-\subsection{字体配置}
-模板配置了两种字库，以 \opt{fontset = windows} 为例：
-\begin{enumerate}
-	\item 中文：主字体（衬线字体）为中易宋体，无衬线字体族为中易黑体，%
-	且二者均可加粗为对应的伪粗体；《规范》中未规定的楷体和仿宋均为 \pkg{ctex} 宏集的预设，为避免格式审查问题，应当减少使用；
-	\item 西文：除英文摘要的关键词使用中易黑体、除公式中的西文（数字、字母等）使用特殊字体，其它一律使用 Times New Roman；
-	\item 公式：模板会根据实际字体安装情况，选择 $LibertinusMath$ 字体或使用 \LaTeX\ 的默认字体。
-\end{enumerate}
-
-\subsection{中文字体命令及对应西文示例}
-\begin{enumerate}
-	\item 宋体：北京化工大学 BUCT 1958 或 \textrm{北京化工大学 BUCT 1958}
-	\item 粗宋体：{\bfsong 北京化工大学 BUCT 1958} 或 \emph{北京化工大学 BUCT 1958}
-	\item 黑体：{\heiti 北京化工大学 BUCT 1958} 或 \textsf{北京化工大学 BUCT 1958}
-	\item 粗黑体：{\bfhei 北京化工大学 BUCT 1958} 或 \textsf{\bfseries 北京化工大学 BUCT 1958}
-	\item 仿宋：{\ttfamily 北京化工大学 BUCT 1958} 或 \texttt{北京化工大学 BUCT 1958}
-	\item 斜体：{\itshape 北京化工大学 BUCT 1958} 或 \textit{北京化工大学 BUCT 1958}
-\end{enumerate}
-
-\section{浮动体}
-% 一些文字用来充版面。摘自 https://github.com/chinese-poetry/chinese-poetry
-六王毕，四海一，蜀山兀，阿房出。覆压三百余里，隔离天日。骊山北构而西折，直走咸阳。
-二川溶溶，流入宫墙。五步一楼，十步一阁；廊腰缦回，檐牙高啄；各抱地势，钩心斗角。
-盘盘焉，囷囷焉，蜂房水涡，矗不知其几千万落。长桥卧波，未云何龙？复道行空，不霁何虹？
-高低冥迷，不知西东。歌台暖响，春光融融；舞殿冷袖，风雨凄凄。一日之内，一宫之间，而气候不齐。
-
-妃嫔媵嫱，王子皇孙，辞楼下殿，辇来于秦，朝歌夜弦，为秦宫人。明星荧荧，开妆镜也；
-绿云扰扰，梳晓鬟也；渭流涨腻，弃脂水也；烟斜雾横，焚椒兰也。雷霆乍惊，宫车过也；
-辘辘远听，杳不知其所之也。一肌一容，尽态极妍，缦立远视，而望幸焉。有不见者，三十六年。
-燕赵之收藏，韩魏之经营，齐楚之精英，几世几年，剽掠其人，倚叠如山。一旦不能有，输来其间。
-鼎铛玉石，金块珠砾，弃掷逦迤，秦人视之，亦不甚惜。
-
-\subsection{插图}\label{subsec:fig}
-
-一般的图片插入使用 \env{figure} 环境。
-一张普普通通的插图参见图~\ref{fig:a-single-image}。
-
-\begin{figure}[H]
-	\centering
-	\includegraphics[width=0.3\textwidth]{image-plain.pdf}
-	\caption{一张插图。加上参数 [H] 固定图片位置，禁止“浮动”}\label{fig:a-single-image}
-\end{figure}
-
-嗟乎！一人之心，千万人之心也。秦爱纷奢，人亦念其家。奈何取之尽锱铢，用之如泥沙！
-使负栋之柱，多于南亩之农夫；架梁之椽，多于机上之工女；钉头磷磷，多于在庾之粟粒；
-瓦缝参差，多于周身之帛缕；直栏横槛，多于九土之城郭；管弦呕哑，多于市人之言语。
-使天下之人，不敢言而敢怒。独夫之心，日益骄固。戍卒叫，函谷举，楚人一炬，可怜焦土！
-
-至于图片的并排，如果只需为组图写一个图注，可在一个 \env{figure} 环境中多次使用 \cs{includegraphics} 命令（可根据需要在插图之间加入空白）。两张并排的图片参见图~\ref{fig:abreast-image}。
-
-\begin{figure}[htbp]
-	\centering
-	\includegraphics[width=0.3\textwidth]{image-a.pdf}
-	\hspace{1cm}
-	\includegraphics[width=0.3\textwidth]{image-c.pdf}
-	\caption{并排的插图，这适合无需在每一张图下写图注的情况。}\label{fig:abreast-image}
-\end{figure}
-
-呜呼！灭六国者六国也，非秦也；族秦者秦也，非天下也。嗟乎！使六国各爱其人，则足以拒秦；
-使秦复爱六国之人，则递三世可至万世而为君，谁得而族灭也？秦人不暇自哀，而后人哀之；
-后人哀之而不鉴之，亦使后人而复哀后人也。
-
-梁惠王曰：“寡人之于国也，尽心焉耳矣。河内凶，则移其民于河东，移其粟于河内；河东凶亦然。
-察邻国之政，无如寡人之用心者。邻国之民不加少，寡人之民不加多，何也？
-
-但如果需要在每一个子图下写上图注（或需要对子图标序），可使用 \cs{subcaptionbox} 命令。
-一张子图见图~\ref{subfig:abreast-image-a}，又一张子图见图~~\ref{subfig:abreast-image-c}，这两张并排起来的组图见图~\ref{fig:abreast-image-a-c}。
-
-\begin{figure}[htbp]
-	\centering
-	\subcaptionbox{这是一张图片。\label{subfig:abreast-image-a}}
-	{\includegraphics[height = 5cm]{image-a.pdf}}
-	\hspace{1cm}
-	\subcaptionbox{这又是一张图片。\label{subfig:abreast-image-c}}
-	{\includegraphics[angle = 90, height = 5cm]{image-c.pdf}}
-	\caption{并排的插图，这适合每一张图写一个图注的情况。}\label{fig:abreast-image-a-c}
-\end{figure}
-
-孟子对曰：“王好战，请以战喻。填然鼓之，兵刃既接，弃甲曳兵而走。或百步而后止，
-或五十步而后止。以五十步笑百步，则何如？”曰：“不可，直不百步耳，是亦走也。”
-曰：“王如知此，则无望民之多于邻国也。不违农时，谷不可胜食也；数罟不入洿池，
-鱼鳖不可胜食也；斧斤以时入山林，材木不可胜用也。谷与鱼鳖不可胜食，材木不可胜用，
-是使民养生丧死无憾也。养生丧死无憾，王道之始也。五亩之宅，树之以桑，五十者可以衣帛矣
-。鸡豚狗彘之畜，无失其时，七十者可以食肉矣。百亩之田，勿夺其时，数口之家，可以无饥矣；
-谨庠序之教，申之以孝悌之义，颁白者不负戴于道路矣。七十者衣帛食肉，黎民不饥不寒，
-然而不王者，未之有也。狗彘食人食而不知检，涂有饿莩而不知发，人死，则曰：‘非我也，
-岁也。’是何异于刺人而杀之，曰‘非我也，兵也’?王无罪岁，斯天下之民至焉。”
-
-（机械设计等）设计图纸需要编目。模板新定义了类似 \env{figure} 的 \env{dfigure}环境。
-设计图纸的标签与普通插图不同，且计数器相互独立。
-对于图纸的编目，可以在主文件以 \cs{listofdesignfigures} 生成独立的目录，或使用
-\cs{dcaption}\marg{Caption}命令与主目录合并。
-\begin{dfigure}% [H] or [htbp] is also available here.
-	\centering
-	\includegraphics[width = \textwidth]{worm-gear.pdf}
-	\caption{设计图纸示例}  % \dcaption{设计图纸示例} % 该命令将其编入主目录。
-\end{dfigure}
-
-以上命令适合大部分图片的插入。
-但不可否认的是，\LaTeX{}对于图文混排的能力是较弱的，如果希望深入了解，推荐~
-\href{https://github.com/WenboSheng/epslatex-cn}{\LaTeXe 插图指南}
-（中译本第三版）作为参考资料。
-
-
-\subsection{表格}\label{subsec:tab}
-论文中常用三线表。本模板的组成见表~\ref{tab:mainfile}。
-
-\begin{table}[ht]
-	\centering
-	\caption{模板的组成}\label{tab:mainfile}
-		\begin{tabular}{ll}
-			\toprule
-			文件（夹）名           & 简述\\
-			\midrule
-			\file{chapter/}       & 论文各个部分的源文件路径\\
-			\file{code/}          & 源代码的路径\\
-			\file{figure/}        & 插图的路径\\
-			\file{buctthesis.ins} & \textsc{DocStrip} 驱动文件\\
-			\file{buctthesis.dtx} & \textsc{DocStrip} 源文件\\
-			\file{main.tex}       & 主文件\\
-			\file{main.pdf}       & 示例文档\\
-			\file{buctthesis.cls} & 模板的文档类文件\\
-			\file{thesisbib.bib}  & \BibTeX{}参考文献数据库\\
-			\file{mycfg.sty}      & 自定义配置文件\\
-			\file{README.md}      & 项目自述文件\\
-			\file{buctthesis.pdf} & 写作指南\\
-			\bottomrule
-		\end{tabular}
-\end{table}
-
-北冥有鱼，其名为鲲。鲲之大，不知其几千里也。化而为鸟，其名为鹏。鹏之背，
-不知其几千里也，怒而飞，其翼若垂天之云。是鸟也，海运则将徙于南冥。南冥者，
-天池也。《齐谐》者，志怪者也。《谐》之言曰：“鹏之徙于南冥也，水击三千里，
-抟扶摇而上者九万里，去以六月息者也。”
-
-使用 \cs{hline}命令也能划线，但其线宽固定。关于表格内对齐与常用的命令见表~\ref{tab:tabcmd}。
-\begin{table}[H]
-	\centering
-	\caption{表格命令举例}\label{tab:tabcmd}
-	\begin{tabular}{lcrp{5em}@{\extracolsep{3em}}l}
-		\hline
-		左对齐 & 居中对齐 & 右对齐 & 定宽               & 增加左侧间距\\
-		l     & c        &  r    & p\marg{width}  & @\{\cs{extracolsep}\marg{width}\}\\
-		\hline
-	\end{tabular}
-\end{table}
-
-野马也，尘埃也，生物之以息相吹也。
-天之苍苍，其正色邪？其远而无所至极邪？其视下也，亦若是则已矣。且夫水之积也不厚，
-则其负大舟也无力。覆杯水于坳堂之上，则芥为之舟；置杯焉则胶，水浅而舟大也。
-风之积也不厚，则其负大翼也无力。故九万里，则风斯在下矣，而后乃今培风；
-背负青天而莫之夭阏者，而后乃今将图南。
-
-另外，三线表生成横线的命令 \cs{toprule}、\cs{midrule}和
-\cs{bottomrule}后可以加一个可选参数来实现对线宽的控制，如果不加参数则为默认值；
-而\cs{cline}可针对某些表列画上横线。
-此外，两个表格也能横向并列排版，如表~\ref{tab:2tab}。
-
-\begin{table}[H]
-	\centering
-	\caption{这是一个并列排版的示例}
-	\label{tab:2tab}
-	\begin{tabular}{|c|r|r|}
-		\hline
-			& \multicolumn{2}{c|}{成绩} \\\cline{2-3}
-		姓名 & 语文 & 数学 \\\hline
-		张三 & 91 & 92 \\\hline
-		\end{tabular}
-	\hspace{1cm}
-	\begin{tabular}{|c|r|r|}
-		\hline
-		\multirow{2}*{姓名} & \multicolumn{2}{c|}{成绩} \\ \cline{2-3}
-			& 语文          & 数学 \\ \hline
-		李四 & 93           & 94 \\ \hline
-		\end{tabular}
-\end{table}
-
-蜩与学鸠笑之曰：“我决起而飞，抢榆枋而止，时则不至，而控于地而已矣，奚以之九万里而南为？”
-适莽苍者，三餐而反，腹犹果然；适百里者宿舂粮，适千里者，三月聚粮。之二虫又何知？
-小知不及大知，小年不及大年。奚以知其然也？朝菌不知晦朔，蟪蛄不知春秋，此小年也。
-楚之南有冥灵者，以五百岁为春，五百岁为秋。上古有大椿者，以八千岁为春，八千岁为秋。
-此大年也。而彭祖乃今以久特闻，众人匹之。不亦悲乎！
-
-至于可跨页的长表格，可以使用 \env{longtable} 来帮忙，见表~\ref{tab:longtab}。
-
-\begin{longtable}[c]{*{5}{l}r}
-	\caption{带有塑化剂的PEO-基聚合物电解质举例}\label{tab:longtab}\\
-	\toprule
-	\textbf{条目} & \textbf{聚合物基体} & \textbf{锂盐} & \textbf{塑化剂} & \textbf{$T$ (\si{\degreeCelsius})} & \textbf{离子电导率 (\si{S.cm^{-1}})}\\ \midrule
-	\endfirsthead
-	\multicolumn{6}{c}{\small 续表 \thetable\quad 带有塑化剂的PEO-基聚合物电解质举例} \\
-	\toprule
-	\textbf{条目} & \textbf{聚合物基体} & \textbf{锂盐} & \textbf{塑化剂} & \textbf{$T$ (\si{\degreeCelsius})} & \textbf{离子电导率 (\si{S.cm^{-1}})}\\ \midrule
-	\endhead
-	\bottomrule
-	\endfoot\endlastfoot
-	1 & PEO & LiTf & PEG & 40 & \num{e-4} \\
-	2 & PEO & LiTFSI & PEGDME & 60 & \num{3.8e-4} \\
-	3 & PEO & LiTf & MC3 & 25 & \num{5.0e-5} \\
-	4 & PEO & LiTf & TEG & 30 & \num{6.5e-5} \\
-	5 & PEO & LiTf & EC & 60 & \num{9.0e-4} \\
-	6 & PEO & LiTf & PC & 60 & \num{5.2e-4} \\
-	7 & PEO/P(VDF-HFP) & \ce{LiClO4} & EC/PC & 30 & \num{1.25e-3} \\
-	8 & PEO/PDMAEMA & LiTFSI & Tetraglyme & 25 & \num{4.7e-4} \\
-	9 & PEO & LiTf & EC & 25 & \num{1.5e-4} \\
-	10 & PEO & LiTf & EC/PC & 25 & \num{1.2e-4} \\
-	11 & PEO & LiTf & EC & 30 & \num{1.6e-4} \\
-	12 & PEO & LiTf & LiTFSI/DEP & 20 & \num{4.6e-5} \\
-	13 & PEO & \ce{LiClO4} & DOP & 25 & \num{3.8e-4} \\
-	14 & PEO & \ce{LiClO4} & DBP & 25 & $\sim10^{-5}$ \\
-	15 & PEO & \ce{LiClO4} & DMP & 25 & $\sim10^{-5}$ \\
-	16 & PEO & LiTf & DBP & 25 & \num{6.0e-4} \\
-	17 & PEO & LiTFSI & CP & 25 & $\sim10^{-5}$ \\
-	18 & PEO & LiTFSI & SN & 30 & \num{1.0e-3} \\
-	19 & PEO & LiTFSI & SN & 25 & \num{2.9e-3} \\
-	20 & PEO & LiBOB & SN & 20 & $\sim10^{-4}$ \\
-	21 & PEO & LiTFSI & BMITFSI & 25 & \num{3.2e-4} \\
-	22 & PEO & LiTFSI & EMITFSI & 40 & \num{2.67e-4} \\
-	23 & PEO & LiTFSI & \ce{PP13TFSI} & 40 & \num{8.93e-5} \\
-	24 & PEO & LiTf & EMITf & 25 & \num{3.0e-4}\\
-	25 & PEO & LiTFSI & \ce{PP13FSI} & 60 & \num{2.18e-3} \\
-	26 & PEO & LiTFSI & \ce{Pyr24TFSI} & 35 & $\sim10^{-5}$ \\
-	27 & PEO & \ce{LiBF4} & \ce{MMPIBF4} & 25 & \num{2.06e-3} \\
-	28 & PEO & \ce{LiPF6} & \ce{MMPIPF6} & 25 & \num{1.13e-3} \\  \bottomrule
-\end{longtable}
-
-汤之问棘也是已：“穷发之北有冥海者，天池也。有鱼焉，其广数千里，未有知其修者，其名为鲲。
-有鸟焉，其名为鹏。背若泰山，翼若垂天之云。抟扶摇羊角而上者九万里，绝云气，负青天，然后图南，
-且适南冥也。斥鷃笑之曰：‘彼且奚适也？我腾跃而上，不过数仞而下，翱翔蓬蒿之间，此亦飞之至也。
-而彼且奚适也？’”此小大之辩也。
-
-
-如果希望单元格内自动换行以适应列宽，
-可以使用\env{tabularx}环境，表 \ref{tab:tabularx} 是一个示例。
-\begin{table}[htbp]
-	\centering
-	\begin{minipage}{0.9\textwidth}
-		\caption{表格控制列宽及自动折行。有些时候标题会比较长，那么我们可以把表格放到一个小页环境里，从而达到比较好的折行效果。}
-		\label{tab:tabularx}
-		% 整张表格最大宽度设为文本宽度（由于处于小页，则为0.8倍论文文本宽度）；
-		% 控制第一、二列列宽，第三列允许折行
-		\begin{tabularx}{\textwidth}{p{4em}p{7.5em}X}
-			\toprule
-									& \multicolumn{1}{c}{\em 原文}         & \multicolumn{1}{c}{\em 翻译}                                                                                         \\
-			\cmidrule(l){2-3}
-									& 亦余心之所善兮，虽九死其犹未悔。 & For the ideal that I hold dear to my heart，I will not regret a thousand times to die.                           \\
-			\cmidrule(l){2-3}
-			\multirow{3}{*}{古文翻译} & 不畏浮云遮望眼，自缘身在最高层。 & We have no fear of the clouds that may block our sights as we are already at the top of the height.              \\
-			\cmidrule(l){2-3}
-									& 苟利国家生死以，岂因祸福避趋之。 & I shall dedicate myself to the interests of the country in life and death irrespective of personal weal and woe. \\
-			\bottomrule
-		\end{tabularx}
-	\end{minipage}
-\end{table}
-
-故夫知效一官，行比一乡，德合一君，而征一国者，其自视也亦若此矣。而宋荣子
-犹然笑之。且举世誉之而不加劝，举世非之而不加沮，定乎内外之分，辩乎荣辱之
-境，斯已矣。彼其于世，未数数然也。虽然，犹有未树也。夫列子御风而行，泠然
-善也。旬有五日而后反。彼于致福者，未数数然也。此虽免乎行，犹有所待者也。
-若夫乘天地之正，而御六气之辩，以游无穷者，彼且恶乎待哉？故曰：至人无己，
-神人无功，圣人无名。
-
-若要在表格中使用脚注，请参见第~\ref{subsec:footnote}小节。
-
-一些在线网站如
-~\href{http://www.tablesgenerator.com}{LaTeX Tables Generator}~
-可以帮助制作更复杂的表格。
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/chapter2.tex b/Master/texmf-dist/doc/latex/buctthesis/chapter2.tex
deleted file mode 100644
index 25f950001c9..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/chapter2.tex
+++ /dev/null
@@ -1,303 +0,0 @@
-%% 第二章--chapter2.tex
-\chapter{示例}\label{chap:CodeIntro}
-\section{公式与数学类环境}\label{subsec:eqandmath}
-公式分为编号和不编号的两类。可以使用\env{equation}环境为公式编号。
-\begin{equation}\label{eq:gougu}
-	x_{1,2}=\frac{-b \pm \sqrt{b^2-4ac}}{2a}.
-\end{equation}
-加上 \cs{label}，就能使用 \cs{ref}或 \cs{eqref}引用了。
-代入式~\ref{eq:gougu}，可解得式~\eqref{eq:gougu}。
-
-不编号的公式使用 \env{equation*} 环境。
-\begin{equation*}
-	\int_{-\infty}^{+\infty}\frac{1}{\sqrt{2\uppi}\sigma}		% 直立的 π
-	\mathrm{e}^{-\tfrac{(x-\mu)^2}{2\sigma^2}} \,\mathrm{d}x =1
-\end{equation*}
-
-行内公式可套以美元符号 \verb+$  $+，如 $f(x)=ax^2+bx+c$.
-对于上述 \env{equation*} 环境中的公式（即行间公式），可套以双美元符号 \verb+$$  $$+
-或 \verb+\[   \]+。
-但是并不建议使用前者，因其在 \LaTeX\ 中并没有完整的重定义，有可能会在某些命令上失效。
-
-关于公式的命令可以参考 \pkg{amsmath} 宏包说明文档，中译可参考 \href{http://static.latexstudio.net/article/2019/0204/amsmath-guide-zh-cn.pdf}{amsmath 包使用手册}；
-%除此之外可参考 \href{http://media.cism.it/attachments/ch8.pdf}{Higher Mathematics}。
-还有一些在线网站，如 \href{https://latexlive.com/}{latexlive} 不仅能够即时预览，还提供了图像与手写识别系统。
-以下举几个例子来展示最常见的用法：
-
-由$\cos 2x=\cos^2x-\sin^2x$ ，	% 函数
-则$\Vector{n}=a\Vector{x}+b\Vector{y}+c\Vector{z}.$	% 自定义向量，区别于\vec。见 mycfg.sty
-又因$\mathcal{M}\in \mathbb{R}$，			% 字母样式
-于是
-\[
-	\int_a^b f(t)\,\mathrm{d}t = \iint\limits_S g(x,y)\,\mathrm{d}x\mathrm{d}y
-	= \iiint\nolimits_D\, \mathrm{d}h.	% 积分号及角标
-\]
-得
-\[\lim_{n \to \infty}\sum_{i=1}^n{\frac{1}{n}}\sin\frac{k}{n}.\]	% 极限、无穷、求和
-故
-\begin{equation}\label{eq:res}
-	\oint_{\gamma}f(z)\,\mathrm{d}z=2\uppi\symbfit{i}\sum^n_{k=1}\mathrm{I}(\gamma,a_k)\mathrm{Res}(f,a_k).
-\end{equation}
-
-若要公式多行对齐，可以使用 \env{align} 环境。下面的例子在等号处对齐：
-\begin{align}
-	x^2 + y^2 & = 1            \\
-	x         & = \sqrt{1-y^2} \\\text{and also }
-	y         & =\sqrt{1-x^2}
-\end{align}
-这会对每一行的公式进行编号。若在 \env{equation} 环境中嵌套 \env{aligned} 环境，加上参数[b]
-可以达到多行对齐但只对最后一个式子编号的效果：
-\begin{equation}
-	\begin{aligned}[b]
-		(a + b)^3   & = (a + b) (a + b)^2         \\
-					& = (a + b)(a^2 + 2ab + b^2)  \\
-					& = a^3 + 3a^2b + 3ab^2 + b^3
-	\end{aligned}
-\end{equation}
-
-模板使用 \pkg{amsthm} 宏包预定义了部分与数学相关的环境，格式及编号如下：
-\begin{axiom}
-	这是一条axiom，使用\env{axiom}环境。
-\end{axiom}
-\begin{theorem}[某某定理]   % []内为可选参数
-	这是一条theorem，使用\env{theorem}环境。
-\end{theorem}
-\begin{corollary}[一条推论]\label{cor:cor1}
-	这是一条corollary，使用\env{corollary}环境。
-\end{corollary}
-\begin{proof}
-	这是一条proof，使用\env{proof}环境。
-	\[
-		\Matrix{A}=\begin{bmatrix}
-			a_{11} & \cdots  & a_{1n} \\
-			\vdots & \ddots & \vdots \\
-			0      & \cdots & a_{nn}
-		\end{bmatrix}_{n\times n}
-	\]
-
-	在证明的最后一行会加上证毕符号，若其位置不合理则需加上命令 \cs{qedhere}。
-	综上所述，推论 \ref{cor:cor1} 成立。
-\end{proof}
-\begin{remark}
-	这是一条remark，使用\env{remark}环境。
-\end{remark}
-\begin{assumption}
-	这是一条assumption，使用\env{assumption}环境。
-\end{assumption}
-\begin{definition}
-	这是一条definition，使用\env{definition}环境。
-\end{definition}
-\begin{property}
-	这是一条property，使用\env{property}环境。
-\end{property}
-\begin{proposition}
-	这是一条proposition，使用\env{proposition}环境。
-\end{proposition}
-\begin{lemma}
-	这是一条lemma，使用\env{lemma}环境。
-\end{lemma}
-
-以上是模板已经定义了的数学类环境，但也能自定义。
-如：
-\newtheorem{tale}{传说}[chapter]	% 计数与章编号相关
-\begin{tale}[山经]	  % []内为可选参数
-	精卫衔微木，将以填沧海。
-\end{tale}
-\begin{tale}[海经]
-	刑天舞干戚，猛志固常在。
-\end{tale}
-
-
-\section{代码}\label{subsec:code}
-若要在文中插入代码，简单的代码可以使用原文照列命令~\verb+\verb+或~\verb*@\verb*@，
-比如~\verb-i++-、\verb*|int main|，二者区别在于，带*号的将展示代码中的空格。
-如果插入代码块，可使用环境\env{lstlisting}，且可以有如下选择：
-\subsubsection{直接在 \LaTeX\ 中书写代码}
-\begin{lstlisting}[language=C++,caption=Hello World!,label=code:HelloWorld]
-/* Hello World C++ */
-#include<iostream>
-using namespace std;
-/*****   main function	*****/
-int main()
-{
-	cout<<"Hello World!"<<endl;		@*//Print "Hello World!", I'm \LaTeX{}！@*
-	return 0;
-}
-\end{lstlisting}
-\subsubsection{引用代码文件}
-源代码存放于 \file{code/} 文件夹里，直接调用即可。
-\lstinputlisting[
-	language=C++,
-	caption=你好，世界！,
-	label=code:HelloWorld2
-]{code/helloworld.cpp}
-
-模板按照《规范》以 Times New Roman 字体书写代码。
-代码的关键字以粗体标出，而注释（西文）使用斜体。
-模板载入文档类时的 \opt{submit} 选项将关闭代码颜色。
-
-代码 \ref{code:HelloWorld} 展示了如何从代码块中临时返回到 \LaTeX\ 中。
-
-\section{化学类}
-模板加载了 \pkg{mhchem} 宏包，方便了化学（方程）式的书写。
-使用命令 \cs{ce}\marg{formula} 把化学（方程）式括起来。
-\subsubsection{简单化学式}
-\begin{table}[H]
-	\centering
-	\begin{tabular}{llllll}
-		\ce{H2O}    & \ce{Sb2O3}  & \ce{KCr(SO4)2.12H2O} & \ce{CrO4^2-}                & \ce{[AgCl2]-}              & \ce{^{0}_{-1}M^{-}} \\
-		\ce{$n$H2O} & \ce{H2(aq)} & \ce{KCr(SO4)2*12H2O} & \ce{Fe(CN)_{$\frac{6}{2}$}} & \ce{$cis${-}[PtCl2(NH3)2]} & \ce{\alpha-Al2O3}   \\
-	\end{tabular}
-\end{table}
-\subsubsection{含键化学式}
-\begin{table}[H]
-	\centering
-	\begin{tabular}{llll}
-		\ce{A-B=C#D}                           & \ce{A\bond{-}B\bond{=}C\bond{#}D} & \ce{A\bond{1}B\bond{2}C\bond{3}D} & \ce{A\bond{~}B\bond{~-}C} \\
-		\ce{A\bond{~--}B\bond{~=}C\bond{-~-}D} & \ce{A\bond{...}B\bond{....}C}     & \ce{A\bond{->}B\bond{<-}C}        &                           \\
-	\end{tabular}
-\end{table}
-\subsubsection{化学方程式}
-\begin{table}[H]
-	\centering
-	\begin{tabular}{llll}
-		\ce{A ->[H2O] B} & \ce{A <=>[{上方文字}][{text below}] B} & \ce{A ->[$x$][$x_i$] B} & \ce{A v B (v) -> C ^ D (^)} \\
-	\end{tabular}
-\end{table}
-\subsubsection{其他}
-\begin{itemize}
-	\item 标注（可能对 CJK 文字不支持）：
-			\ce{Zn^2+
-			<=>[+ 2OH-][+ 2H+]
-			$\underset{\text{amphoteres Hydroxid}}{\ce{Zn(OH)2 v}}$
-			<=>[+ 2OH-][+ 2H+]
-			$\underset{\text{Hydroxozikat}}{\ce{[Zn(OH)4]^2-}}$
-			}
-	\item 对于化学方程式等的编号，与数学方程相似：
-			$$\ce{2H2O ->[{electrify}] 2H2 ^ + O2 ^}$$
-			\begin{equation}
-					K^\ominus  = \ce{\frac{[Hg^2+][Hg]}{[Hg2^2+]}}
-			\end{equation}
-\end{itemize}
-
-至于有机化学的结构式等，尽管有一些宏包可以绘制，但使用图片插入可能是一个更好
-的选择。
-
-\section{文献引用和参考文献}\label{sec:bib}
-模板使用 \cs{cite}\marg{CiteKey}命令实现上标、方括号以“顺序编码制”引用参考文献，
-这是学校《规范》的要求。一个例子。\cite{abbott2016observation}而使用
-\cs{nocite}\marg{CiteKey}命令则指明不引用但需要列出的参考文献。\nocite{*}
-
-同一处引用多个文献时，应将各篇文献的引用标签一同写在 \cs{cite} 命令中，
-并以西文逗号“,”分隔各标签。所产生的样式为：当在同一处引用两篇参考文献时，
-引用序号将以西文逗号分隔；
-当多余两篇且连续时，将标示起止序号并以短划线相连。这\cite{texbook,latexrumen}
-又是\cite{texbook,latexrumen,gbt7714-2005}一个例子。\cite{abbott2016observation,texbook,latexrumen,buctthesis}
-
-关于 \file{thesisbib.bib} 文件的编辑，
-可以使用\href{http://scholar.google.com.cn/}{谷歌学术}\footnote{亦可以访问国内镜像站。}%
-或\href{http://xueshu.baidu.com}{百度学术}两种方式（方法类似）将文献数据导入\BibTeX{}数据库，大致方法如下：
-\begin{itemize}
-	\item 在搜索框中搜索题目（或作者、DOI等），确定所引用的论文后点击“引用”；并在弹出框中，单击最下方“BibTeX”的链接，如图~\ref{fig:addbib}；
-	\item 在弹出的网页中复制所有代码至 \file{thesisbib.bib} 文件；
-	\item 在论文中使用 \cs{cite} 命令引用相应的文献。
-	% 这里用了一条简单的自定义命令，用于快速插入单张图片，见 \file{mycfg.sty}文件。
-	\addfig{AddBib.png}{在谷歌学术中导出参考文献的步骤}{fig:addbib}
-\end{itemize}
-
-举个例子：经过图~\ref{fig:addbib} 所示步骤后，弹出的网页文本如下：
-\begin{lstlisting}
-@article{abbott2016observation,
-	title={Observation of gravitational waves from a binary black hole merger},
-	author={Abbott, Benjamin P and Abbott, Richard and %（省略）
-	},
-	journal={Physical review letters},
-	volume={116},
-	number={6},
-	pages={061102},
-	year={2016},
-	publisher={APS}
-}
-	\end{lstlisting}
-将以上内容复制进 \file{thesisbib.bib}，在论文中使用
-\cs{cite\{abbott2016observation\}}即可引用此文献。
-这里的 “abbott2016observation”是该篇参考文献的引用标签，可以修改。
-再来一个\cite{ashirov2008tetramerization} ，
-网络上的资源引用\cite{buctthesis}，等。
-
-\section{其他}\label{sec:other}
-
-\subsection{脚注}\label{subsec:footnote}
-本模板采用带圈数字脚注，计数跨页重置，使用命令 \cs{footnote}\marg{text}。
-前方高能\footnote{我是可爱的脚注。}。
-
-有些情况下（比如在表格环境、各种盒子内）使用 \cs{footnote}并不能正确生成脚注。
-我们可以分两步进行，先使用 \cs{footnotemark}\oarg{text} 为脚注计数，
-再在合适的位置用 \cs{footnotetext}\oarg{mark}\marg{text} 生成脚注。比如表~\ref{tab:ftnt1}。
-\begin{table}[htb]
-	\centering
-	\caption{脚注示例1}
-	\label{tab:ftnt1}
-	\begin{tabular}{llll}
-		\hline
-		人之初                & 性本善 & 性相近 & 习相远 \\
-		苟\footnotemark 不教 & 性乃迁 & 教之道 & 贵以专 \\
-		\hline
-	\end{tabular}
-\end{table}
-\footnotetext{苟：如果。}
-
-利用 \pkg{threeparttable} 宏包提供的 \env{threeparttable} 环境可以实现在表格底下写脚注，见表~\ref{tab:ftnt2}。
-
-\begin{table}[htb]
-\centering
-\begin{threeparttable}
-	\caption{脚注示例2}\label{tab:ftnt2}
-	\begin{tabular}{cccc}
-		\toprule
-		昔孟母	& 择邻处\tnote{*} & 子不学	& 断机杼\\
-		\midrule
-		窦燕山\tnote{$\dagger$}	& 有义方 & 教五子\tnote{$\ddagger$}	&名俱扬\\
-		\bottomrule
-	\end{tabular}
-	\begin{tablenotes}\small
-		\item [*] 脚注1。
-		\item [$\dagger$] 脚注2。
-		\item [$\ddagger$] 脚注3。
-	\end{tablenotes}
-\end{threeparttable}
-\end{table}
-
-\subsection{列表环境}\label{subsec:items}
-本模板提供了三种列表环境：不编号的\env{itemize}、编号的\env{enumerate}
-和使用关键字的\env{description}环境。在文档的中英文摘要部分分别展示了
-基础的编号和不编号的列表环境；上面三种列表环境可以嵌套使用（至多四层），
-且会自动处理不同层次的缩进和编号，如下所示：
-\begin{itemize}
-	\item 一条
-	\item 次条
-	\item 这一条可以分为\dots
-		\begin{itemize}
-			\item 子一条
-		\end{itemize}
-\end{itemize}
-稍复杂一点的，如：
-\begin{enumerate}
-	\item 中文
-		\begin{description}
-			\item[文言文] 古代汉语
-			\item[白话文] 现代汉语
-				\begin{enumerate}
-					\item 口语
-						\begin{enumerate}
-							\item 普通话
-							\item 方言
-						\end{enumerate}
-					\item 书面语
-				\end{enumerate}
-		\end{description}
-	\item English
-\end{enumerate}
-
-注意：一级编号列表环境最多罗列10条，否则标签会显示错误。
-%，到第11条时，标签将从第10条的\ding{201}到第11条的\ding{202}
diff --git a/Master/texmf-dist/doc/latex/buctthesis/chapter3.tex b/Master/texmf-dist/doc/latex/buctthesis/chapter3.tex
deleted file mode 100644
index b5467fcbe5d..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/chapter3.tex
+++ /dev/null
@@ -1,4 +0,0 @@
-%% 第三章--chapter3.tex
-\chapter[含 English 的标题]{这是题目含有 English 的一章，用这个例子来说明虽然章节名很长，但是可以使用简短的编目}
-\section[同理节亦然]{含有English的一节}
-文字words
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/conclusion.tex b/Master/texmf-dist/doc/latex/buctthesis/conclusion.tex
deleted file mode 100644
index bb315d214e3..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/conclusion.tex
+++ /dev/null
@@ -1,9 +0,0 @@
-%% 结论--conclusion.tex
-\begin{conclusion}
-	这里是结论。
-
-	对全文做出简明扼要的总结，获得的主要研究进展及结论。
-
-	Happy \TeX ing!祝大家一切顺利！
-
-\end{conclusion}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/declare-bachelor.png b/Master/texmf-dist/doc/latex/buctthesis/declare-bachelor.png
deleted file mode 100644
index a8fb26db0d3..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/declare-bachelor.png
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/declare-master-doctor.png b/Master/texmf-dist/doc/latex/buctthesis/declare-master-doctor.png
deleted file mode 100644
index a03c3a76d37..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/declare-master-doctor.png
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/denotation.tex b/Master/texmf-dist/doc/latex/buctthesis/denotation.tex
deleted file mode 100644
index bc16f6f3d77..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/denotation.tex
+++ /dev/null
@@ -1,33 +0,0 @@
-%% 符号说明--denotation.tex
-\begin{denotation}[11cm]\label{chap*:deno}%
-	$\uppi$				& 圆周率			\\	
-	$c_0$				& 真空中光速		\\
-	$G$					& 万有引力常量	  \\
-	$k$					& 静电力常量		\\
-	$\varepsilon _0$	& 真空电容率		\\
-	$\mu_0$				& 真空磁导率		\\
-	PVA					& 聚乙烯醇，Polyvinyl Alcohol\\
-	EDTA				& 乙二胺四乙酸，Ethylenediaminetetraacetic Acid\\
-	上邪				& 上邪！我欲与君相知，长命无绝衰。
-	山无陵，江水为竭。冬雷震震，夏雨雪。
-	天地合，乃敢与君绝！\\
-	春江花月夜			& 春江潮水连海平，海上明月共潮生。 \\
-						& 滟滟随波千万里，何处春江无月明！  \\
-						& 江流宛转绕芳甸，月照花林皆似霰；  \\
-						& 空里流霜不觉飞，汀上白沙看不见。  \\
-						& 江天一色无纤尘，皎皎空中孤月轮。  \\
-						& 江畔何人初见月？江月何年初照人？  \\
-						& 人生代代无穷已，江月年年望相似。  \\
-						& 不知江月待何人，但见长江送流水。  \\
-						& 白云一片去悠悠，青枫浦上不胜愁。  \\
-						& 谁家今夜扁舟子？何处相思明月楼？  \\
-						& 可怜楼上月徘徊，应照离人妆镜台。  \\
-						& 玉户帘中卷不去，捣衣砧上拂还来。  \\
-						& 此时相望不相闻，愿逐月华流照君。  \\
-						& 鸿雁长飞光不度，鱼龙潜跃水成文。  \\
-						& 昨夜闲潭梦落花，可怜春半不还家。  \\
-						& 江水流春去欲尽，江潭落月复西斜。  \\
-						& 斜月沉沉藏海雾，碣石潇湘无限路。  \\
-						& 不知乘月几人归，落月摇情满江树。  \\
-	CTAN		 		& Comprehensive \TeX\ Archive Network\\*
-\end{denotation}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/foreword.tex b/Master/texmf-dist/doc/latex/buctthesis/foreword.tex
deleted file mode 100644
index b02dd6d4986..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/foreword.tex
+++ /dev/null
@@ -1,50 +0,0 @@
-%% 前言--foreword.tex
-\begin{foreword}
-这里是前言。点明毕业论文的论题、学术意义以及其与所阅读文献的关系，
-简要说明文献收集的目的、重点、时空范围、文献种类、核心刊物等方面的内容。
-
-豫章故郡，洪都新府。星分翼轸，地接衡庐。襟三江而带五湖，控蛮荆而引瓯越。
-物华天宝，龙光射牛斗之墟；人杰地灵，徐孺下陈蕃之榻。雄州雾列，俊采星驰。
-台隍枕夷夏之交，宾主尽东南之美。都督阎公之雅望，棨戟遥临；宇文新州之懿
-范，襜帷暂驻。十旬休假，胜友如云；千里逢迎，高朋满座。腾蛟起凤，孟学士
-之词宗；紫电青霜，王将军之武库。家君作宰，路出名区；童子何知，躬逢胜饯。
-
-时维九月，序属三秋。潦水尽而寒潭清，烟光凝而暮山紫。俨骖騑于上路，访风
-景于崇阿。临帝子之长洲，得仙人之旧馆。层峦耸翠，上出重霄；飞阁流丹，下
-临无地。鹤汀凫渚，穷岛屿之萦回；桂殿兰宫，即冈峦之体势。
-
-披绣闼，俯雕甍，山原旷其盈视，川泽纡其骇瞩。闾阎扑地，钟鸣鼎食之家；舸
-舰迷津，青雀黄龙之舳。云销雨霁，彩彻区明。落霞与孤鹜齐飞，秋水共长天一
-色。渔舟唱晚，响穷彭蠡之滨，雁阵惊寒，声断衡阳之浦。
-
-遥襟甫畅，逸兴遄飞。爽籁发而清风生，纤歌凝而白云遏。睢园绿竹，气凌彭泽
-之樽；邺水朱华，光照临川之笔。四美具，二难并。穷睇眄于中天，极娱游于暇
-日。天高地迥，觉宇宙之无穷；兴尽悲来，识盈虚之有数。望长安于日下，目吴
-会于云间。地势极而南溟深，天柱高而北辰远。关山难越，谁悲失路之人；萍水
-相逢，尽是他乡之客。怀帝阍而不见，奉宣室以何年？
-
-嗟乎！时运不齐，命途多舛。冯唐易老，李广难封。屈贾谊于长沙，非无圣主；
-窜梁鸿于海曲，岂乏明时？所赖君子见机，达人知命。老当益壮，宁移白首之心？
-穷且益坚，不坠青云之志。酌贪泉而觉爽，处涸辙以犹欢。北海虽赊，扶摇可接；
-东隅已逝，桑榆非晚。孟尝高洁，空余报国之情；阮籍猖狂，岂效穷途之哭！
-
-勃，三尺微命，一介书生。无路请缨，等终军之弱冠；有怀投笔，慕宗悫之长风。
-舍簪笏于百龄，奉晨昏于万里。非谢家之宝树，接孟氏之芳邻。他日趋庭，叨陪
-鲤对；今兹捧袂，喜托龙门。杨意不逢，抚凌云而自惜；钟期既遇，奏流水以何惭？
-
-呜乎！胜地不常，盛筵难再；兰亭已矣，梓泽丘墟。临别赠言，幸承恩于伟饯；
-登高作赋，是所望于群公。敢竭鄙怀，恭疏短引；一言均赋，四韵俱成。请洒潘
-江，各倾陆海云尔：
-
-\begin{center}
-滕王高阁临江渚，佩玉鸣鸾罢歌舞。
-
-画栋朝飞南浦云，珠帘暮卷西山雨。
-
-闲云潭影日悠悠，物换星移几度秋。
-
-阁中帝子今何在？槛外长江空自流。
-\end{center}
-
-\end{foreword}
-
diff --git a/Master/texmf-dist/doc/latex/buctthesis/frontmatter.tex b/Master/texmf-dist/doc/latex/buctthesis/frontmatter.tex
deleted file mode 100644
index 766979da0ff..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/frontmatter.tex
+++ /dev/null
@@ -1,106 +0,0 @@
-%% 前置部分--frontmatter.tex
-%% 诚信声明
-\makedeclare%[figure/declare-bachelor.png]
-
-%% 任务书
-\begin{taskbook}
-\taskinfo		% or use `\taskinfo*' for less lines.
-
-\taskitem		% 1.设计（论文）的主要任务及目标
-大学之道，在明明德，在亲民，在止于至善。知止而后有定；
-定而后能静；静而后能安；安而后能虑；虑而后能得。
-物有本末，事有终始。知所先后，则近道矣。
-
-古之欲明明德于天下者，先治其国；欲治其国者，先齐其家；
-欲齐其家者，先修其身；欲修其身，先正其心；欲正其心者，先诚其意；
-欲诚其意者，先致其知；致知在格物。物格而后知至；知至而后意诚；
-意诚而后心正；心正而后身修；身修而后家齐；家齐而后国治；
-国治而后天下平。
-
-自天子以至于庶人，壹是皆以修身为本。其本乱而未治者否矣。
-其所厚者薄，而其所薄者厚，未之有也。此谓知本，此谓知之至也。
-	
-\taskitem		% 2.设计（论文）的基本要求和内容
-古之学者必有师。师者，所以传道受业解惑也。人非生而知之者，孰能无惑？
-惑而不从师，其为惑也，终不解矣。生乎吾前，其闻道也固先乎吾，吾从而
-师之；生乎吾後，其闻道也亦先乎吾，吾从而师之。吾师道也，夫庸知其年
-之先後生於吾乎！是故无贵无贱无长无少，道之所存，师之所存也。
-	
-\taskitem		% 3.主要参考文献
-	\begin{bibenumerate}
-		\item 北京化工大学教务处. 本科生毕业设计（论文）撰写规范 [EB/OL]. 2018[2020-04-08]. \url{https://jiaowuchu.buct.edu.cn/2018/1009/c515a22046/page.htm}.
-		\item 刘海洋. \LaTeX\ 入门 [M]. 北京 : 电子工业出版社, 2013.
-		\item MITTELBACH F, GOOSSENS M, BRAAMS J, et al. The \LaTeX\ Companion[M]. 2nd ed. Reading, Massachusetts : Addison-Wesley, 2004.
-		\item 
-	\end{bibenumerate}
-	
-\taskitem		% 4.进度安排
-	\begin{table}[H]
-		\centering
-		\begin{tabularx}{.95\textwidth}{p{1.5em}|X|p{6em}}
-			\hline
-					& 	设计（论文）各阶段名称		  &		起止日期	\\\hline
-				1	& 								&				\\\hline
-				2	&								&				\\\hline
-				3	&								&				\\
-			\hline
-		\end{tabularx}
-	\end{table}
-\end{taskbook}
-
-
-%% 摘要
-\begin{cabstract}
-	摘要和关键词一起写在这里。
-
-	摘要介绍所研究的主要内容、方法、结果及创新点。应有中文、外文两种文本，
-	如无特殊情况，外文文本摘要一般使用英文撰写。中文、外文摘要各占A4纸页面的一半。
-	外文摘要要与中文摘要相呼应，其写作模式同中文基本相同。中文摘要一般为300字左右，
-	英文摘要为1500印刷符号左右，含中、英文摘要关键词。
-
-	本项目的创新点有：
-	\begin{enumerate}
-		\item 开发了第一份适用于北京化工大学本科生毕业论文的\LaTeX{}模板；
-		\item 以自身为示例展示此模板的使用方法；
-		\item 这是编号列表环境的第三项。
-	\end{enumerate}
-
-	这里是一些废话，用于填充文本，在后面的部分也会以类似的方式插入无关的文字。
-	这一段话的作用是将中文摘要写到 300 个字。
-
-	（这里总共约 300 字）
-\end{cabstract}
-
-\begin{eabstract}
-	Here is the Abstract and the Keywords.
-
-	In the abstract, you may introduce the main contents of your research,
-	as well as the methods, results and some innovation points. There should
-	be one Chinese version and one foreign version, while the foreign one
-	should generally be written in English except for some special occasions.
-	Each of the context of them takes up half of an A4-page. What's more,
-	the foreign abstract should be in correspondence to the Chinese one,
-	and the narrative pattern is supposed to be similar. The Chinese abstract
-	adds up to normally 300 Chinese characters, while the English abstract
-	totaled around 1500 printed characters, including Chinese and English keywords.
-
-	Oh, here're just 900 letters total. So I have to add something nonsense\dots.
-
-	One dollar and eighty-seven cents. That was all. And sixty cents of it was
-	in pennies. Pennies saved one and two at a time by bulldozing the grocer
-	and the vegetable man and the butcher until one's cheeks burned with the
-	silent imputation of parsimony that such close dealing implied. Three times
-	Della counted it. One dollar and eighty-seven cents. And the next day would
-	be Christmas. There was clearly nothing to do but flop down on the shabby
-	little couch and howl. So Della did it.
-	\hfill --- \textit{THE GIFT OF THE MAGI by O.Henry}
-
-	Innovations in the research:
-	\begin{itemize}
-		\item Developing the first \LaTeX{} writting template for BUCT undergraduate thesis;
-		\item Using the PDF itself as an example to show how to use the template;
-		\item This is the third item of an unnumbered list.
-	\end{itemize}
-
-	(Around 1500 letters total)
-\end{eabstract}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/helloworld.cpp b/Master/texmf-dist/doc/latex/buctthesis/helloworld.cpp
deleted file mode 100644
index 692b8a8f5d1..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/helloworld.cpp
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Hello World C++ */
-#include<iostream>
-using namespace std;
-/*****   main function	*****/
-int main()
-{
-	cout<<"Hello World!"<<endl;		//Print "Hello World!"
-	return 0;
-}
diff --git a/Master/texmf-dist/doc/latex/buctthesis/image-a.pdf b/Master/texmf-dist/doc/latex/buctthesis/image-a.pdf
deleted file mode 100644
index 6d7ecb88a0d..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/image-a.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/image-c.pdf b/Master/texmf-dist/doc/latex/buctthesis/image-c.pdf
deleted file mode 100644
index 44e09057956..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/image-c.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/image-plain.pdf b/Master/texmf-dist/doc/latex/buctthesis/image-plain.pdf
deleted file mode 100644
index 4a617f5ae2b..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/image-plain.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/latexmkrc b/Master/texmf-dist/doc/latex/buctthesis/latexmkrc
deleted file mode 100644
index 06b1d9a3c07..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/latexmkrc
+++ /dev/null
@@ -1,5 +0,0 @@
-$pdf_mode = 5;
-$xelatex = "xelatex -shell-escape -file-line-error -halt-on-error -interaction=nonstopmode -no-pdf -synctex=1 %O %S";
-$xdvipdfmx = "xdvipdfmx -q -E -o %D %O %S";
-$bibtex_use = 1.5;
-$clean_ext = 'aux bbl blg fls lodf log out synctex.gz xdv fdb_latexmk hd ilg glo';
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/main.tex b/Master/texmf-dist/doc/latex/buctthesis/main.tex
deleted file mode 100644
index 18cd777ac97..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/main.tex
+++ /dev/null
@@ -1,85 +0,0 @@
-% !TeX encoding = UTF-8
-% 主文件--main.tex
-\documentclass[
-	type = bachelor,	% bachelor | master | doctor
-	%submit,
-	%openany,			% openany | openright(default)
-	fontset = windows,  % fandol | windows (normal)
-]{buctthesis}
-
-% 在这个文件里载入其他对写作有帮助的宏包，或自定义命令等
-\usepackage{mycfg}
-
-\buctsetup{
-	%%%%% 各选项之间不要留有空行，并以西文逗号“,”分隔 %%%%%
-	% 论文的中文标题
-	ctitle		= {BUCTthesis写作示例文档},
-	% 论文的英文标题
-	etitle		= {HOW TO \TeX\ WITH BUCTthesis: AN EXAMPLE},
-	% 作者姓名
-	cauthor		= {张三},
-	% 班级
-	class		= {某某1024},
-	%学号
-	studentid	= {2018020999},
-	% 学院
-	school		= {材料科学与工程学院},
-	% 专业名称
-	major		= {高分子材料与工程},
-	% 导师的姓名与职称
-	supervisor	= {李四教授},
-	% 专业负责人姓名
-	msupervisor	= {王五},
-	% 中文、英文关键词，各关键词间以西文逗号“,”分隔
-	ckeywords   = {论文,\LaTeX{},模板},
-	ekeywords   = {thesis,\LaTeX{},template},
-}
-
-\begin{document}
-	% 生成伪封面。实际的论文封面由学校统一印制，正式写作可删去。
-	\maketitle
-	
-	% 从此以大写罗马数字编页码
-	\frontmatter
-	
-	% 诚信声明、任务书、摘要
-	\include{chapter/frontmatter}
-	
-	% 生成主目录
-	\tableofcontents
-	% 设计图纸目录，这与主目录独立。
-	\listofdesignfigures
-	
-	% 前言
-	\include{chapter/foreword}
-	
-	% 从此以阿拉伯数字编页码
-	\mainmatter
-	
-	% 正文各章节
-	\include{chapter/chapter1}
-	\include{chapter/chapter2}
-	\include{chapter/chapter3}
-	
-	% 结论
-	\include{chapter/conclusion}
-	
-	% 参考文献。
-	% 注意：至少引用一篇参考文献，否则执行全编译时下面两行会引起编译错误。
-	\bibliographystyle{gbt7714-numerical}
-	\bibliography{thesisbib.bib}
-	
-	% 符号说明
-	\include{chapter/denotation}
-	
-	% 翻译
-	\include{chapter/translation}
-	
-	% 致谢
-	\include{chapter/acknowledgement}
-	
-	% 附录
-	\appendix
-	\include{chapter/app1}
-	
-\end{document}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/mycfg.sty b/Master/texmf-dist/doc/latex/buctthesis/mycfg.sty
deleted file mode 100644
index 966e5b113b2..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/mycfg.sty
+++ /dev/null
@@ -1,35 +0,0 @@
-% mycfg.sty---The file for your beloved packages, commands and customization.
-
-\ProvidesPackage{mycfg}
-
-%% Packages
-\RequirePackage{bxtexlogo}  % 生成错落有致的如 LaTeX 的宏包
-\RequirePackage{zhlipsum}   % 中文乱数假文
-
-%% Commands
-% 自定义命令格式为：\newcommand{<命令>}[<参数个数>][<首参默认值>]{<具体的定义>}
-% add a single fig. Usage:\addfig[Width]{Path}{Caption}{Label}
-\newcommand{\addfig}[4][.8\textwidth]{%
-	\begin{figure}[H]
-		\centering
-		\includegraphics[width = #1]{#2}
-		\caption{#3}\label{#4}
-	\end{figure}
-}
-\newcommand{\version}{v1.3}
-\newcommand{\cs}[1]{\texttt{\textbackslash#1}}
-\newcommand{\file}{\textsf}
-\newcommand{\pkg}{\textsf}
-\newcommand{\env}{\texttt}
-\newcommand{\opt}{\texttt}
-\newcommand{\marg}[1]{\texttt{\{$\langle$#1$\rangle$\}}}
-\newcommand{\oarg}[1]{\texttt{ [$\langle$#1$\rangle$] }}
-
-%% Maths
-\newcommand\Vector{\symbfit}
-\newcommand\Matrix{\symbfit}
-
-%% A sample of thesis cover
-\title{BUCTthesis 写作示例文档\par\version}
-\author{Miracle0565}
-\ctexset{today=big}
diff --git a/Master/texmf-dist/doc/latex/buctthesis/thesisbib.bib b/Master/texmf-dist/doc/latex/buctthesis/thesisbib.bib
deleted file mode 100644
index 91e8f780f5d..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/thesisbib.bib
+++ /dev/null
@@ -1,70 +0,0 @@
-% thesisbib.bib--bibliography database for Bibtex
-
-@article{abbott2016observation,
-  title     = {Observation of gravitational waves from a binary black hole merger},
-  author    = {Abbott, Benjamin P and Abbott, Richard and Abbott, TD and Abernathy, MR and Acernese, Fausto and Ackley, Kendall and Adams, Carl and Adams, Thomas and Addesso, Paolo and Adhikari, RX and others},
-  journal   = {Physical Review Letters},
-  volume    = {116},
-  number    = {6},
-  pages     = {061102},
-  year      = {2016},
-  publisher = {APS}
-}
-
-@article{ashirov2008tetramerization,
-  title     = {Tetramerization of 3-methyl-cyclopropene-3-carbonitrile: A novel CN-Alder-ene reaction},
-  author    = {Ashirov, Roman V and Shamov, Grigory A and Lodochnikova, Olga A and Litvynov, IA and Appolonova, Svetlana A and Plemenkov, Vitaly V},
-  journal   = {The Journal of organic chemistry},
-  volume    = {73},
-  number    = {15},
-  pages     = {5985--5988},
-  year      = {2008},
-  publisher = {ACS Publications}
-}
-@software{buctthesis,
-  title    = {{BUCTthesis: A LaTeX writting template for BUCT thesis}},
-  author   = {{Miracle0565}},
-  year     = {2020},
-  urldate  = {2020-04-08},
-  url      = {https://github.com/Miracle0565/BUCTthesis}
-}
-@standard{gbt7714-2005,
-  author   = {{中国国家标准化管理委员会}},
-  title    = {GB/T 7714-2005: 文后参考文献著录规则},
-  year     = {2005},
-  address  = {北京},
-  publisher= {中国标准出版社},
-  language = {chinese}
-}
-@book{latexcompanion,
-  author    = {Frank Mittelbach and Michel Goossens and Johannes Braams and David, P.Carlisle and Chris Rowley},
-  title     = {The {\LaTeX{}} {C}ompanion},
-  edition   = {2},
-  address   = {Reading, Massachusetts},
-  publisher = {Addison-Wesley},
-  year      = {2004}
-}
-@book{latexrumen,
-  author    = {刘海洋},
-  title     = {\LaTeX{}入门},
-  year      = {2013},
-  publisher = {电子工业出版社},
-  address   = {北京},
-  isbn      = {978-7-121-20208-7},
-  language  = {chinese}
-}
-@book{texbook,
-  author    = {Donald~E. Knuth},
-  title     = {The {\TeX} book},
-  year      = {1989},
-  edition   = {15},
-  address   = {Reading, Massachusetts},
-  publisher = {Addison-Wesley Publishing Company}
-}
-@online{thenorm,
-  title    = {本科生毕业设计（论文）撰写规范},
-  author   = {北京化工大学教务处},
-  year     = {2019},
-  urldate  = {2020-02-06},
-  url      = {https://jiaowuchu.buct.edu.cn/2018/1009/c515a22046/page.htm}
-}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/translation.tex b/Master/texmf-dist/doc/latex/buctthesis/translation.tex
deleted file mode 100644
index 475fe7e9e74..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/translation.tex
+++ /dev/null
@@ -1,12 +0,0 @@
-%% 翻译--translation.tex
-\begin{translation}
-	Battery
-
-	电池
-
-	電池
-
-	バッテリー
-
-	Батареи
-\end{translation}
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/buctthesis/worm-gear.pdf b/Master/texmf-dist/doc/latex/buctthesis/worm-gear.pdf
deleted file mode 100644
index 3401a4eccce..00000000000
--- a/Master/texmf-dist/doc/latex/buctthesis/worm-gear.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/buctthesis/README.md b/Master/texmf-dist/doc/xelatex/buctthesis/README.md
index b019dd7dbac..b019dd7dbac 100644
--- a/Master/texmf-dist/doc/latex/buctthesis/README.md
+++ b/Master/texmf-dist/doc/xelatex/buctthesis/README.md
diff --git a/Master/texmf-dist/doc/xelatex/buctthesis/buctthesis.pdf b/Master/texmf-dist/doc/xelatex/buctthesis/buctthesis.pdf
new file mode 100644
index 00000000000..6d2e2d84164
--- /dev/null
+++ b/Master/texmf-dist/doc/xelatex/buctthesis/buctthesis.pdf
diff --git a/Master/texmf-dist/doc/latex/buctthesis/manual.sty b/Master/texmf-dist/doc/xelatex/buctthesis/manual.sty
index e12078529ed..e12078529ed 100644
--- a/Master/texmf-dist/doc/latex/buctthesis/manual.sty
+++ b/Master/texmf-dist/doc/xelatex/buctthesis/manual.sty
diff --git a/Master/texmf-dist/source/latex/buctthesis/buctthesis.dtx b/Master/texmf-dist/source/xelatex/buctthesis/buctthesis.dtx
index 159ada51c8b..42a8290981c 100644
--- a/Master/texmf-dist/source/latex/buctthesis/buctthesis.dtx
+++ b/Master/texmf-dist/source/xelatex/buctthesis/buctthesis.dtx
@@ -1,6 +1,6 @@
 % \iffalse meta-comment
 %
-% Copyright (C) 2019-2021 by Miracle0565
+% Copyright (C) 2019-2022 by Miracle0565
 %
 %     https://github.com/Miracle0565/BUCTthesis
 % -------------------------------------------------------
@@ -20,7 +20,7 @@
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 % \iffalse
 %<*driver>
-\ProvidesFile{buctthesis.dtx}[2022/03/04 v1.3 BUCT Thesis Template]
+\ProvidesFile{buctthesis.dtx}[2022/07/29 v1.4.1 BUCT Thesis Template]
 \documentclass{ltxdoc}
 \usepackage{manual}
 \begin{document}
@@ -225,7 +225,7 @@
 %
 % \DescribeOpt{fontset = }
 % 该选项会传递至 \pkg{ctex} 宏集，从而指定全文的字体。模板的设置如表~\ref{tab:fontset}~所示。
-% 
+%
 % 其中选项 \opt{fandol} 或使用 \opt{\meta{others}} 选项 \footnote{参见\pkg{ctex}宏集第 4.3 小节。}是为了一些不方便安装字体的系统或平台（如 Overleaf）所采取的\emph{临时解决方案}。
 % 这些字体与中易系列字体有少许差别，且偶尔有缺字现象。
 % 因此，强烈建议在最后提交论文前，在合适的环境下使用 \opt{fontset = windows} 进行编译。
@@ -374,16 +374,15 @@
 %
 % 三者是互相独立的。
 % 英文目录通过 \cs{echapter} 等命令指定某一标题的英文标题，参见~\ref{subsubsec:bitoc}。
-% 设计图纸目录通过 \env{dfigure} 环境指定插图为“设计图纸”并计数编号。
-% 参见~\ref{subsubsec:dfigure}。
+% 设计图纸目录通过 \env{dfigure} 环境指定插图为“设计图纸”并计数编号，参见~\ref{subsubsec:dfigure}。
 %
 % \subsubsection{符号说明表}\label{subsubsec:deno}
 % \DescribeEnv{denotation}
-% 符号说明部分的源文件位于 \file{chapter/denotation.tex}，
+% 符号说明表的源文件位于 \file{chapter/denotation.tex}，
 % 使用 \env{denotation} 环境。
-% 《本科规范》和《研究生规范》中都未详细规定符号说明部分的格式，
+% 《本科规范》和《研究生规范》中都未详细规定符号说明表的格式，
 % 模板设计了一个无框线、可跨页的长表格，直接在环境里填入内容即可。
-% 环境接受一个可选 \meta{Width} 参数 ，代表“说明”一列的宽度，用于在必要时调整。
+% 环境接受一个可选参数 \meta{width} ，代表“说明”一列的宽度，用于在必要时调整。
 % \begin{latex}
 %   \begin{denotation}[12cm] % 设置第二列的列宽为 12 cm，默认 10 cm
 %       符号1   &   说明1   \\
@@ -524,12 +523,18 @@
 %
 % \subsubsection{参考文献}\label{subsubsec:bib}
 % \DescribeMacro{\cite}
+% \DescribeMacro{\inlinecite}
 % \DescribeMacro{\nocite}
 % \begin{syntax}{cite}
 %    \marg{CiteKey}
 % \end{syntax}
+% \qquad
+% \begin{syntax}{inlinecite}
+%    \marg{CiteKey}
+% \end{syntax}
 %
-% 模板以上标、方括号按“顺序编码制”引用参考文献。
+% 模板使用 \cs{cite} 实现上标、方括号按“顺序编码制”引用参考文献；
+% \cs{inlinecite} 可实现行间引用，适合某些特殊情况使用；
 % 而 \cs{nocite}\marg{CiteKey} 则指明不引用但需要列出的参考文献。
 % 在同一处引用多个文献时，应将各篇文献的引用标签一同写在参数里，
 % 并以西文逗号“,”分隔每个 \meta{CiteKey}。
@@ -607,19 +612,28 @@
 % \end{latex}
 %
 % \subsection{封面}\label{subsec:cover}
-% 本小节将简单介绍研究生论文封面的代码与编译。
+% \DescribeMacro{\makecover}
+% BUCTthesis 对学校印刷的纸质封面进行了仿制，本小节将简单介绍相关代码与编译方法。
 %
-% 与本科模板不同的是，BUCTthesis 的硕博模板在 \file{cover} 文件夹中仿制了学校的封面。
+% 由于字体的原因，BUCTthesis 将封面模板另置于 \file{cover} 文件夹，可根据需要使用。
 % 在该文件夹中的三个文件都与封面有关，编译时请确保它们位于同一路径之下。
 %
-% \emph{注意：这里的“仿制”仅是实现封面的效果，学校印制的封面需要手写内容，故不能替代学校统一印制的封面。}
+% \emph{注意：这里的“仿制”仅是实现封面的效果，学校印制的封面需要手写内容，故不能在纸本上替代学校统一印制的封面；
+% 若无特殊说明，可以在提交电子版时使用此封面。但，仍请以教务处最新通告为准。}
 % \begin{enumerate}
-%    \item \file{cover.tex}：源文档。与 \cs{buctsetup} 类似，这里使用\cs{coversetup} 定义论文信息。
+%    \item \file{buctcover.tex}：源文档。在 \cs{documentclass} 后定义封面所属学位，在 \cs{coversetup} 中定义论文相关信息。除导言区外无需修改。
 % \begin{latex}
+%    \documentclass[
+%        type = bachelor    % type = [ bechelor | master | doctor ]
+%    ]{buctcover}
 %   \coversetup{
-%       % 学号，位于封面的右上角
+%       %班级，位于右上角，仅本科
+%       class = {计科1024},
+%       % 学号，位于右上角
 %       studentid = {2021010234},
-%       % 标题。封面的标题有两行，每一行控制在 18 个汉字长度以内
+%       % 标题。总字数不要超过 36 个汉字长度。
+%       % 本科：可以一行或分两行写，如果无第二行将 titleB 留空或注释掉；
+%       % 硕博：封面的标题有两行，每一行控制在 18 个汉字长度以内。
 %       titleA = {甲乙丙丁戊己庚辛壬癸一二三},
 %       titleB = {四五六七八九十甲乙丙丁戊己},
 %       % 作者
@@ -635,15 +649,18 @@
 %
 % 至于编译，只需一遍 xelatex 即可，扩展名可省略。
 % \begin{shell}
-%   xelatex cover.tex
+%   xelatex buctcover.tex
 % \end{shell}
+% 如果编译两遍，还会生成封面的 PDF 书签。
+% 此时可以用其他 PDF 工具将封面整合到论文中，同时还能保留封面书签以便于跳转。
+%
 %    \item \file{buctcover.cls}：格式控制文件。类似 \file{buctthesis.cls}，亦可由 \file{buctthesis.ins} 和 \file{buctthesis.dtx} 生成：
 %     \begin{shell}
 %   xelatex buctthesis.ins
 %     \end{shell}
 % 请注意执行以上命令时会同时生成 \file{buctcover.cls} 和 \file{buctthesis.cls}，只有前者是用于控制封面的。
 % \end{enumerate}
-% 
+%
 % 除此之外，封面使用的方正系列字体未预装于一些操作系统上，
 % 可访问\href{https://www.foundertype.com}{方正字库官网}下载和安装，具体步骤从略。
 %
@@ -653,12 +670,11 @@
 %    \item SimHei，中易黑体
 %    \item KaiTi，中易楷体
 %    \item STXingkai，华文行楷
-%    \item FZDaBiaoSong-B06S，方正大标宋简体
 %    \item FZXiaoBiaoSong-B05S，方正小标宋简体
+%    \item FZDaBiaoSong-B06S，方正大标宋简体（仅硕博封面需要）
 % \end{enumerate}
 %
 %
-%
 % \StopEventually{\PrintChanges\PrintIndex}
 %
 % \clearpage
@@ -667,7 +683,7 @@
 %    \begin{macrocode}
 %<class|cover>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
 %<*class>
-\ProvidesClass{buctthesis}[2021/09/10 v1.2 BUCT Thesis Template]
+\ProvidesClass{buctthesis}[2022/07/29 v1.4.1 BUCT Thesis Template]
 %    \end{macrocode}
 %
 % 装载 \pkg{ifxetex} 宏包，并通过 \cs{RequireXeTeX} 命令检查编译命令。
@@ -741,7 +757,7 @@
 %    \end{macrocode}
 %
 % \begin{macro}{\buct@def@key}
-% 定义用于定义论文相关信息的内部命令。例如
+% 定义用于定义论文相关信息的内部命令。例如：
 % \begin{latex}
 %   \buct@def@key{ctitle}
 % \end{latex}
@@ -760,7 +776,7 @@
 % \end{macro}
 %
 % \begin{macro}{\buctsetup}
-% 定义 \cs{buctsetup} 命令方便在正文中设置。
+% 定义 \cs{buctsetup} 命令作为接口，方便在主文件中设置。
 %    \begin{macrocode}
 \newcommand{\buctsetup}[1]{\kvsetkeys{buct}{#1}}
 \buct@def@key{ctitle}
@@ -776,9 +792,9 @@
 % \end{macro}
 %
 % \begin{macro}{\buct@def@sep@key}
-% 对于 \texttt{ckeywords} 等键接受的是以西文逗号“,”分隔的值，上面的定义就不合适了。
-% 所以要对值做分隔。相比 \cs{buct@def@key} 这里多一个参数，为在论文中的分隔符。
-% 此处宏展开可参考\href{https://www.zhihu.com/question/26916597}{这篇讨论}。
+% 对于 \opt{ckeywords} 等键接受的是以西文逗号“,”分隔的值，上面的定义就不合适了。
+% 所以要对值做分隔。相比 \cs{buct@def@key} 这里多一个参数，即为在论文中的分隔符。
+% 此处的宏展开可参考\href{https://www.zhihu.com/question/26916597}{这篇讨论}。
 %    \begin{macrocode}
 \newcommand{\buct@def@sep@key}[2]{%
     \@namedef{#1}##1{%
@@ -825,7 +841,7 @@
 \RequirePackage{pifont,enumitem}
 %    \end{macrocode}
 %
-% 一个适合排版含数值和单位的物理量的宏包，它也提供能使表格中小数点竖直对齐的命令。
+% 一个适合排版含数值和单位的物理量的宏包，它也能提供在表格中按小数点竖直对齐的方法。
 %    \begin{macrocode}
 \RequirePackage{siunitx}
 %    \end{macrocode}
@@ -857,8 +873,8 @@
 \RequirePackage{listings}
 %    \end{macrocode}
 %
-% 该宏包提供了符合要求的参考文献编排格式。这里的选项会传递至 \pkg{natbib}，
-% 从而在正文中能数字上标、方括号引用。
+% 该宏包提供了符合要求的“参考文献”章节中文献的编排格式。
+% 这里的选项会传递至 \pkg{natbib}，从而在正文中能实现数字、上标、方括号的引用模式。
 %    \begin{macrocode}
 \RequirePackage[sort&compress]{gbt7714}
 %    \end{macrocode}
@@ -907,27 +923,27 @@
 %
 % 根据\cs{buct@fontsetval} 的值，分别设置不同的字体。
 %
-%    \begin{macrocode}
-\ifthenelse{\equal{\buct@fontsetval}{windows}}{
-%    \end{macrocode}
-%
 % 在 Windows 系统下，需要对中易宋体、中易黑体开启“伪粗”和“伪斜”，并设置相关系数。
 %    \begin{macrocode}
+\ifthenelse{\equal{\buct@fontsetval}{windows}}{
     \xeCJKsetup{EmboldenFactor=2.2,SlantFactor=0.2}
     \setCJKmainfont{SimSun}[AutoFakeBold,AutoFakeSlant]
     \setCJKsansfont{SimHei}[AutoFakeBold]
 }
 %    \end{macrocode}
-% 而在非Windows 系统下，则由 \pkg{ctex} 宏集自动检测环境并保留其默认设置，
+% 而在非 Windows 系统下，则由 \pkg{ctex} 宏集自动检测环境并保留其默认设置，
 % 同时警告所使用的字体与《规范》（即默认设置）存在不同。
 %    \begin{macrocode}
 {
-    \ClassWarning{buctthesis}{The fonts differ to the default.}
+    \ClassWarning{buctthesis}{%
+        The fonts differ to the default.\MessageBreak%
+        Use fontset = windows to correct.%
+    }
 }
 %    \end{macrocode}
 %
 % \begin{macro}{\bfsong}
-% 因设置中易宋体开启“伪粗体”，使用 \cs{bfseries}将产生加粗的效果，
+% 因设置中易宋体开启“伪粗体”，使用 \cs{bfseries} 将产生加粗的效果，
 % 这与一般的 \LaTeX\ 常识是相悖的。
 % 因此模板提供了更明确的命令 \cs{bfsong}。
 %    \begin{macrocode}
@@ -936,13 +952,14 @@
 % \end{macro}
 % \begin{macro}{\bfhei}
 %
-% 对于黑体同理。此外要注意模板将Windows下预设的无衬线字体（微软雅黑）改为了黑体。
+% 对于黑体同理。
+% 此外要注意：模板将 \opt{fontset = windows} 预设的无衬线字体（微软雅黑）改为了中易黑体。
 %    \begin{macrocode}
 \newcommand{\bfhei}{\sffamily\bfseries}
 %    \end{macrocode}
 % \end{macro}
 %
-% 对于西文正文，全部统一设置为Times New Roman。
+% 对于西文正文，全部统一设置为Times New Roman，以尽可能避免格式审查问题。
 %    \begin{macrocode}
 \setmainfont{Times New Roman}
 \setsansfont{Times New Roman}
@@ -963,18 +980,20 @@
 }{}
 %    \end{macrocode}
 %
-%
 % 指定 Unicode 中带圈数字 \symbol{"2460}--\symbol{"2469} 使用中文字体。
 %    \begin{macrocode}
 \xeCJKDeclareCharClass{CJK}{"2460->"2469}
 %    \end{macrocode}
-% 页眉与页脚的字体。
+%
+% 完成配置后，定义文中各元素的字体样式。
+%
+% 页眉与页脚。
 %    \begin{macrocode}
 \newcommand{\buct@headfont}{\zihao{-5}\songti}
 \newcommand{\buct@footfont}{\zihao{-5}\songti}
 %    \end{macrocode}
 %
-% 诚信声明（本科），或论文原创性声明和授权声明（硕博）的字体。
+% 诚信声明（本科）或论文原创性声明和授权声明（硕博）。
 %    \begin{macrocode}
 \ifbuct@bachelor
     \newcommand{\buct@dcl@titlefont}{\zihao{3}\songti}
@@ -987,7 +1006,7 @@
 \fi
 %    \end{macrocode}
 %
-% 中英文摘要中的字体。
+% 中英文摘要。
 % 这里的 \cs{CJKfamily+} 命令来自于 \pkg{xeCJK} 宏包，用于切换字体族：
 % 当参数为空时，则使用当前的 CJK 字体族，且对所有字符类生效。
 %    \begin{macrocode}
@@ -1012,7 +1031,7 @@
 \fi
 %    \end{macrocode}
 %
-% 设置中英文目录、设计图纸目录标题和目录中的各级标题字体。
+% 中英文目录、设计图纸目录标题和目录中的各级标题。
 %    \begin{macrocode}
 \ifbuct@bachelor
     \newcommand{\buct@toc@tocfont}{\zihao{4}\mdseries\heiti}
@@ -1042,13 +1061,14 @@
 \fi
 %    \end{macrocode}
 %
-% 设置浮动体（包括插图和表格）内容、编号和标题的字体。
+% 浮动体（包括插图和表格）内容、编号和标题。
 %    \begin{macrocode}
 \newcommand{\buct@floatfont}{\zihao{5}}
-\newcommand{\buct@float@captionfont}{\zihao{5}\songti}
+\newcommand{\buct@float@captionfont}{\zihao{5}\mdseries}
+\newcommand{\buct@float@labelfont}{\zihao{5}\mdseries}
 %    \end{macrocode}
 %
-% 设置代码块的字体。根据是否开启 \opt{submit} 选项，设置关键字、注释的颜色。
+% 代码块。根据是否开启 \opt{submit} 选项，设置关键字、注释的颜色。
 % 如果未开启，关键字将会使用深蓝色，注释会使用深灰色。
 %    \begin{macrocode}
 \newcommand{\buct@codefont}{\ttfamily\songti\zihao{5}}
@@ -1085,7 +1105,7 @@
     \newcommand\buct@task@class{班级：}
     \newcommand\buct@task@student{学生：}
     \newcommand\buct@task@supervisor{指导教师（含职称）：}
-    \newcommand\buct@task@msupervisor{专业负责人：} 
+    \newcommand\buct@task@msupervisor{专业负责人：}
     \newcommand\buct@task@itema{1.设计（论文）的主要任务及目标}
     \newcommand\buct@task@itemb{2.设计（论文）的基本要求和内容}
     \newcommand\buct@task@itemc{3.主要参考文献}
@@ -1126,14 +1146,14 @@
         可以允许采用影印、缩印或其它复制手段保存、汇编学位论文。
 
         $\Box$ 论文暂不公开（或保密）注释：本学位论文属于暂不公开
-        （或保密）范围，在\rule{1.5em}{.6pt}年解密后适用本授权书。
+        （或保密）范围，在\rule{1.5em}{.4pt}年解密后适用本授权书。
 
         $\Box$ 非暂不公开（或保密）论文注释：本学位论文不属于暂不公开
         （或保密）范围，适用本授权书。
     }
     \newcommand\buct@dcl@pdf{版权页}
-    \newcommand\buct@sign@author{作者签名：\rule{7em}{.6pt}\qquad{日期：}\rule{7em}{.6pt}}
-    \newcommand\buct@sign@supervisor{导师签名：\rule{7em}{.6pt}\qquad{日期：}\rule{7em}{.6pt}}
+    \newcommand\buct@sign@author{作者签名：\rule{7em}{.4pt}\qquad{日期：}\rule{7em}{.4pt}}
+    \newcommand\buct@sign@supervisor{导师签名：\rule{7em}{.4pt}\qquad{日期：}\rule{7em}{.4pt}}
     \newcommand\buct@cabstract@title{摘\hspace{\ccwd}要}
     \newcommand\buct@eabstract@title{ABSTRACT}
     \newcommand\buct@ckeywords@title{关键词：}
@@ -1141,6 +1161,7 @@
     \newcommand\buct@ckeywords@sep{，}
     \newcommand\buct@ekeywords@sep{,~}
     \newcommand\buct@content@title{目\hspace{\ccwd}录}
+    \newcommand\buct@econtent@chapter{Chapter~}
     \newcommand\econtentsname{Contents}
     \newcommand\buct@deno@title{符号和缩略词说明}
     \newcommand\buct@ack@title{致谢}
@@ -1192,7 +1213,6 @@
 %    \end{macrocode}
 % \end{macro}
 %
-%
 % \begin{macro}{\cleardoublepage}
 % 修改命令 \cs{cleardoublepage}，使之能在插入一张完全空白页的同时
 % 保持页码的连续，适合章页右开的情况。
@@ -1229,24 +1249,14 @@
     \else{
         \thispagestyle{empty}
         \linespread{1.5534}
-        \setlength{\parskip}{9pt}
-        \begin{center}
-            \buct@dcl@titlefont\buct@dcl@title
-        \end{center}
-
-        \buct@dcl@textfont\buct@dcl@text
-
-        \vspace{6pt}\buct@sign@author\vspace{6pt}
-
-        \begin{center}
-            \buct@auth@titlefont\buct@auth@title
-        \end{center}
-
-        \buct@auth@textfont\buct@auth@text
-
-        \vspace{6pt}\buct@sign@author
-
-        \vspace{6pt}\buct@sign@supervisor
+        \setlength{\parskip}{15pt}
+        \centerline{\buct@dcl@titlefont\buct@dcl@title}
+        \par\indent\buct@dcl@textfont\buct@dcl@text
+        \par\indent\buct@sign@author\\[30pt]
+        \centerline{\buct@auth@titlefont\buct@auth@title}
+        \par\indent\buct@auth@textfont\buct@auth@text
+        \par\indent\buct@sign@author
+        \par\indent\buct@sign@supervisor
     }\fi
     \clearpage\normalsize
 }
@@ -1256,6 +1266,7 @@
 % \begin{macro}{\makedeclare}
 % 定义一个带可选参数的命令 \cs{makedeclare}，可选参数为扫面页的相对路径；
 % 若不加参数则使用 \cs{buct@makedeclare} 来插入文本。
+% 这里的 \opt{pages=-} 表示插入所有页面。
 %    \begin{macrocode}
 \NewDocumentCommand{\makedeclare}{ o }{%
     \buct@pdfmark{\ifbuct@bachelor\buct@dcl@title\else\buct@dcl@pdf\fi}{declare}
@@ -1286,7 +1297,7 @@
 %    \end{macrocode}
 % \end{macro}
 %
-% 在这个环境中有如下的排版命令和环境：
+% 排版“任务书”时，提供如下的命令和环境：
 % \begin{macro}{\taskinfo*}
 % 命令 \cs{taskinfo} 或 \cs{taskinfo*}：
 % 后者是学校样例的实现，但是由于换行、空位少造成书写不便，且不甚美观；
@@ -1308,7 +1319,7 @@
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\taskinfo}
-% 更多的换行，相比之下会更加整齐一些。
+% 多了一次换行，相比之下会更加整齐一些。
 %    \begin{macrocode}
                 \buct@task@school\buct@ul[15em]{\buct@school}\qquad
                 \buct@task@major\buct@ul[13em]{\buct@major}\\[3pt]
@@ -1340,7 +1351,7 @@
 % \begin{macro}{\taskitem}
 % 这里相比学校的样例，段前增加了一点空白。
 %    \begin{macrocode}
-    \newcommand{\taskitem}{\vspace{1em}\noindent\buct@taskitem\par}
+    \newcommand{\taskitem}{\vspace{6pt}\noindent\buct@taskitem\par}
 \fi
 %    \end{macrocode}
 % \end{macro}
@@ -1407,7 +1418,7 @@
 \else
     \newenvironment{eabstract}{%
         \cleardoublepage%
-        \buct@pdfmark{\buct@eabstract@title}{eabstract}\markboth{\buct@eabstract@title}{} 
+        \buct@pdfmark{\buct@eabstract@title}{eabstract}\markboth{\buct@eabstract@title}{}
             \begin{center}
                 \setlength{\leftskip}{3em plus 1em minus .5em}
                 \setlength{\rightskip}{3em plus 1em minus .5em}
@@ -1463,7 +1474,7 @@
 %    \end{macrocode}
 % \end{macro}
 % \begin{macro}{\buct@addengcontents}
-% 加入英文目录项。
+% 加入英文目录项。本命令依次接受 3 个参数：目录层级、标题文本、所使用的字体和（或）前缀字符。
 %    \begin{macrocode}
     \newcommand\buct@addengcontents[3]{%
         \addcontentsline{toce}{#1}{\protect\numberline{#3\@nameuse{the#1}}#2}
@@ -1477,7 +1488,7 @@
 % \begin{macro}{\esubsubsection}
 % 定义将不同层次标题加入英文目录中的命令。
 %    \begin{macrocode}
-    \newcommand\echapter[1]{\buct@addengcontents{chapter}{#1}{\buct@toce@chapfont}}
+    \newcommand\echapter[1]{\buct@addengcontents{chapter}{#1}{\buct@toce@chapfont{}\buct@econtent@chapter}}
     \newcommand\esection[1]{\buct@addengcontents{section}{#1}{}}
     \newcommand\esubsection[1]{\buct@addengcontents{subsection}{#1}{}}
     \newcommand\esubsubsection[1]{\buct@addengcontents{subsubsection}{#1}{}}
@@ -1492,7 +1503,7 @@
 % \begin{macro}{\bisubsection}
 % \begin{macro}{\bisubsubsection}
 % 类似 \cs{bicaption} 可接受两个参数来生成双语图标注一样，定义 \cs{bichapter} 命令从而更加方便一些。
-% \emph{以下定义的命令不可带星号。}
+% \emph{以下定义的命令在使用时不可带星号。}
 %    \begin{macrocode}
     \NewDocumentCommand{\bichapter}{ o m m }{\chapter[#1]{#2}\echapter{#3}}
     \NewDocumentCommand{\bisection}{ o m m }{\section[#1]{#2}\esection{#3}}
@@ -1795,7 +1806,7 @@
 \sisetup{%
     list-final-separator = { 和 },
     list-pair-separator = { 和 },
-    range-phrase = {$\sim$},
+    range-phrase = {\,$\sim$\,},
 }
 %    \end{macrocode}
 %
@@ -1844,9 +1855,9 @@
 % 在“符号说明表”中我们嵌套了 \env{longtable} 环境，但其中的字号仍应为小四号。
 % 因此这里需要保留原先的定义。
 %    \begin{macrocode}
+\ifbuct@bachelor\relax\else
     \let\oldlongtable\longtable
     \let\endoldlongtable\endlongtable
-\ifbuct@bachelor\relax\else
     \def\longtable{\zihao{5}\oldlongtable}
     \AtEndEnvironment{longtable}{\normalsize}
 \fi
@@ -1861,7 +1872,7 @@
 %
 %    \begin{macrocode}
 \renewcommand{\captionfont}{\buct@float@captionfont}
-\renewcommand{\captionlabelfont}{\buct@float@captionfont}
+\renewcommand{\captionlabelfont}{\buct@float@labelfont}
 \DeclareCaptionLabelSeparator{capspace}{\quad}
 \captionsetup{labelsep=capspace}
 \captionsetup[table]{%
@@ -1887,7 +1898,7 @@
     \renewcommand{\thesubtable}{(\alph{subtable})}
     \renewcommand{\thetable}{\thechapter-\arabic{table}}
     \renewcommand{\thesubfigure}{(\alph{subfigure})}
-    \renewcommand{\thefigure}{\arabic{chapter}-\arabic{figure}}
+    \renewcommand{\thefigure}{\thechapter-\arabic{figure}}
     \ifbuct@bachelor
         \renewcommand{\thedfigure}{\thechapter-\arabic{dfigure}}
         \renewcommand{\theequation}{\thechapter-\arabic{equation}}
@@ -1899,6 +1910,15 @@
 }
 %    \end{macrocode}
 %
+% \subsubsection{文献引用}
+% \begin{macro}{\inlinecite}
+% 这里定义的 \cs{inlinecite} 适用于行间引用，依赖于 \pkg{natbib} 宏包里的命令。
+%    \begin{macrocode}
+\DeclareRobustCommand\inlinecite{\@inlinecite}
+\def\@inlinecite#1{\begingroup\let\@cite\NAT@citenum\citep{#1}\endgroup}
+%    \end{macrocode}
+% \end{macro}
+%
 % \subsubsection{数学公式}
 % 硕博公式需要加入点线连接公式与编号。这里通过重定义 \file{source2e}
 % 中的 \env{equation} 环境，故仅在 \env{equation} 环境中生效。
@@ -1971,10 +1991,17 @@
 %    \end{macrocode}
 % \end{environment}
 %
+% \begin{macro}{\appendix}
+% 英文目录中，修改“附录”的英文前缀字符，仅硕博。
+%    \begin{macrocode}
+\else
+    \g@addto@macro\appendix{\def\buct@econtent@chapter{Appendix~}}
+%    \end{macrocode}
+% \end{macro}
+%
 % \begin{environment}{achievements}
 % 研究成果及发表的学术论文，仅硕博。
 %    \begin{macrocode}
-\else
     \newenvironment{achievements}{%
         \cleardoublepage
         \chapter*{\buct@achi@title}
@@ -2060,7 +2087,6 @@
 \renewcommand{\em}{\bfsong}
 %    \end{macrocode}
 % \end{macro}
-
 % \subsubsection{脚注}
 % \begin{macro}{\footnote}
 % 使用带圈圈的脚注。尽管 \LaTeX\ 自带了 \cs{textcircled} 命令，但是效果并不如意。
@@ -2110,10 +2136,15 @@
 %
 %
 % \subsection{封面}
-% 由于学校会统一印制封面，这里仅提供\emph{硕博论文封面}的一个参考实现。
+% 由于学校会统一印制封面，这里仅提供本科和硕博的一个参考实现。
+% 并且由于学校所给的参考封面每年都有细微的变动，由本模板所生成的封面上文字间距不能保证与参考一致。
+% 还请留心。
 %    \begin{macrocode}
 %<*cover>
-\ProvidesClass{buctcover}[2021/04/24 Cover Maker for BUCTthesis]
+\ProvidesClass{buctcover}[2022/06/21 Cover Maker for BUCTthesis]
+%    \end{macrocode}
+% 和论文本体一样，目前只支持 \XeLaTeX\ 引擎编译封面，其余设置基本一致。
+%    \begin{macrocode}
 \RequirePackage{ifxetex}
 \RequireXeTeX
 \RequirePackage{kvoptions}
@@ -2132,36 +2163,35 @@
 \LoadClass[zihao=-4]{ctexbook}
 %    \end{macrocode}
 %
-% 目前封面的 \opt{type} 选项仅允许硕博。
+% 封面的 \opt{type} 对于三种学位类型都能支持，但是必须选择其中的一项。
 %    \begin{macrocode}
-\ifbuct@bachelor%
-    \ClassError{buctcover}{%
-        type `bachelor' is unavailable. \MessageBreak%
-        type = [ master | doctor ]%
-    }{}\else
+\ifbuct@bachelor\relax\else
     \ifbuct@master\relax\else
         \ifbuct@doctor\relax\else
             \ClassError{buctthesis}{%
                 Specified thesis type is obligatory: \MessageBreak%
-                type = [ master | doctor ]%
+                type = [ bachelor | master | doctor ]%
             }{}
 \fi\fi\fi
 %    \end{macrocode}
 %
 % 定义用于定义论文相关信息的内部命令。
-% 与 \cls{buctthesis} 不同的是：这里仅能通过 \cs{coversetup} 定义论文信息。其中 \opt{titleA} 和 \opt{titleB} 分别用于封面标题的第一行与第二行。
+% 与 \cls{buctthesis} 不同的是：这里仅能通过 \cs{coversetup} 定义论文信息。
+% 其中 \opt{titleA} 和 \opt{titleB} 分别用于封面标题的第一行与第二行。
+% 由于可能存在只用一行就能写完标题的情况，所以这里不设置后者的默认文本。
 %    \begin{macrocode}
 \newcommand{\coversetup}[1]{\kvsetkeys{buct}{#1}}
+\DeclareStringOption[班级未定义]{class}
 \DeclareStringOption[学号未定义]{studentid}
 \DeclareStringOption[题目首行未定义]{titleA}
-\DeclareStringOption[题目次行未定义]{titleB}
+\DeclareStringOption{titleB}
 \DeclareStringOption[专业未定义]{major}
 \DeclareStringOption[作者未定义]{author}
 \DeclareStringOption[导师未定义]{supervisor}
 \DeclareStringOption[\the\year-\two@digits{\month}-\two@digits{\day}]{date}
 %    \end{macrocode}
 %
-% 页边距设置。经过测量，各边距值比正文部分都要小。
+% 页边距设置。经过测量，各边距值比正文部分都要小；本科暂与硕博设置一致。
 %    \begin{macrocode}
 \RequirePackage[a4paper,nomarginpar,
     top = 2.1cm, bottom = 2.2cm, left = 2cm, right = 2cm,
@@ -2169,9 +2199,17 @@
 ]{geometry}
 %    \end{macrocode}
 %
-% 载入表格、插图、计算尺寸的宏包。
+% 载入 \pkg{xeCJKfntef} 宏包。在 \pkg{ctex} 宏集 2.5 版本之后需要手动载入。
+%    \begin{macrocode}
+\RequirePackage{xeCJKfntef}
+%    \end{macrocode}
+%
+% 以下宏包分别用于排版表格、插图，计算标题文本长度，划本科封面线条，
+% 判断语句和添加封面的 PDF 书签。
+% \pkg{textpos} 配合 \pkg{tikz}，这样就能在页面的任何地方作画了。
 %    \begin{macrocode}
-\RequirePackage{array,graphicx,calc,hyperref}
+\RequirePackage{array,graphicx,calc,tikz,xifthen,hyperref}
+\RequirePackage[absolute,overlay]{textpos}
 %    \end{macrocode}
 %
 % 清空页眉页脚。
@@ -2196,19 +2234,39 @@
 \newCJKfontfamily[xbsong] \xbsong {FZXiaoBiaoSong-B05S}
 \newCJKfontfamily[dbsong] \dbsong {FZDaBiaoSong-B06S}
 %    \end{macrocode}
+% 设置西文字体。事实上该字体这只会作用于本科封面的数字日期，除此之外的数字（如学号）使用中文字体。
+%    \begin{macrocode}
+\setmainfont{Times New Roman}
+%    \end{macrocode}
 %
-% 标尺，用于调试。
+% 标尺，用于调试。手动取消注释来开启。
 %    \begin{macrocode}
 % \usepackage[unit=cm,type=upperleft,hshift=0cm,vshift=0cm]{fgruler}
 %    \end{macrocode}
 %
+% \begin{macro}{\buct@title@ul}
 % 定义下划线命令，这里利用了 \pkg{calc} 宏包的 \cs{widthof} 命令，
 % 取 \cs{buct@titleA} （即首行标题）的长度，用以固定下划线的长度。
+% 文本末尾加一个 \cs{enspace} 会让横线右端稍长于最后一个文字，显得更美观一些。
 %    \begin{macrocode}
 \newcommand\buct@title@ul[1]{%
     \CJKunderline{\makebox[\widthof{\buct@titleA\enspace}][l]{#1}}
 }
 %    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\buct@major@ul}
+% 但是对于本科封面而言，“专业”“学生”“指导教师”与“题目”之间有一大段空白，
+% 可以看做相互独立的表格。因此，这里我们让横线的宽度取所填入专业文本的宽度。
+% 使用 \cs{quad} 会让横线右端长于最后一个文字更多一点，更贴合封面的参考样例。
+%    \begin{macrocode}
+\newcommand\buct@major@ul[1]{%
+    \CJKunderline{\makebox[\widthof{\buct@major\quad}][c]{#1}}
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\buct@format@date}
 % 日期格式处理，将输入的 \cs{buct@date} 拆分。
 %    \begin{macrocode}
 \newcommand\buct@format@date[1]{%
@@ -2219,101 +2277,203 @@
     \expandafter\buct@@process@date\buct@@date\@nil
 }
 %    \end{macrocode}
+% \end{macro}
 %
-% \cs{@zhdate} 命令接受三个数字，将“年”转换为中文数字串，“月”和“日”转换为中文数字；其中“年”中的 0 映射为“〇”而非“零”。
+% \cs{@zhdate} 命令接受三个数字。
+% 本科的日期要求比较简单，直接输出对应的数字即可。
+% 但是样例所给的数字前后有一些空白，我们用 \cs{makebox} 来定格它。
 %    \begin{macrocode}
 \newcommand\@zhdate[3]{%
-    \Large\bfseries\zhkai\ziju{.1}%
-    日\hspace{1.5\ccwd}期：\zhdigits{#1}年\zhnumber{#2}月\zhnumber{#3}日%
+    \bfseries\zhkai
+    \ifbuct@bachelor
+        \zihao{4}
+        #1年\makebox[1.5em]{#2}月\makebox[1.5em]{#3}日
+%    \end{macrocode}
+%
+% 如果是硕博，则将“年”转换为中文数字串，“月”和“日”转换为中文数字；其中“年”中的 0 映射为“〇”而非“零”。
+%    \begin{macrocode}
+    \else
+        \Large\ziju{.1}%
+        日\hspace{1.5\ccwd}期：\zhdigits{#1}年\zhnumber{#2}月\zhnumber{#3}日%
+    \fi
 }
 %    \end{macrocode}
 %
 % \begin{macro}{\buct@makecover}
-% 定义 \cs{buct@makecover} 命令来生成封面。
+% 接下来是重头戏：定义 \cs{buct@makecover} 命令来生成封面。
 %    \begin{macrocode}
 \newcommand{\buct@makecover}{%
 %    \end{macrocode}
 %
-% 封面右上角的“单位代码”和“学号”。
+% 封面右上角的“单位代码”和“学号”，先分别设置格式。
 %    \begin{macrocode}
     \begin{table}[h]
-        \renewcommand{\arraystretch}{1.3}
-        \raggedleft\large
+        \raggedleft
+        \ifbuct@bachelor
+            \songti\zihao{5}
+        \else
+            \renewcommand{\arraystretch}{1.3}\large
+        \fi
+%    \end{macrocode}
+%
+% 用一个无线表格来排版文字。需要注意二者都要以中文字体来书写数字。
+% 注意本科封面的表格右端并不是严格顶头，所以这里空开两个字符的宽度。
+%    \begin{macrocode}
         \begin{tabular}{l@{}l}
-            \xbsong 单位代码 & ：\CJKfamily+{zhsong}\mbox{10010}\\
-            \xbsong 学\hspace{2\ccwd}号 & ：\CJKfamily+{zhsong}\mbox{\buct@studentid}\\
+            \ifbuct@bachelor%
+                班\hspace{2\ccwd}级&：\CJKfamily+{zhsong}\buct@class\hspace*{2\ccwd}\\
+                学\hspace{2\ccwd}号&：\CJKfamily+{zhsong}\buct@studentid\hspace*{2\ccwd}\\
+            \else%
+                \xbsong 单位代码 & ：\CJKfamily+{zhsong}\mbox{10010}\\
+                \xbsong 学\hspace{2\ccwd}号 & ：\CJKfamily+{zhsong}\mbox{\buct@studentid}\\
+            \fi
         \end{tabular}
     \end{table}
-    \vspace{26bp}
+    \ifbuct@bachelor\vspace{3bp}\else\vspace{26bp}\fi
 %    \end{macrocode}
 %
 % 校徽与校名。前者是插图，后者是文字。
+% 需要注意，本科和硕博封面的“北京化工大学”几个字的字距是有差别的。
+% 由于并未设置居中，所以本科还需要手动空一点距离让文本近似居于页面中央。
 %    \begin{macrocode}
     \begin{minipage}[c][][c]{2.35cm}
         \includegraphics[width = 2.35cm]{BUCT-badge.pdf}
     \end{minipage}
     \qquad
     \begin{minipage}[c][2.35cm][c]{9cm}
-        \ziju{-0.02}\xingkai\zihao{0}{北京化工大学}
+        \xingkai
+        \ifbuct@bachelor
+            \ziju{0.1}\hspace*{0.8\ccwd}\zihao{-0}
+        \else
+            \ziju{-0.02}\zihao{0}
+        \fi
+        {北京化工大学}
     \end{minipage}
-    \vspace{18bp}
+    \ifbuct@bachelor\vspace{12bp}\else\vspace{18bp}\fi
 %    \end{macrocode}
 %
-% 标题。
+% 标题。本科的标题中的“(论文)”使用了半角括号，字体使用 Times New Roman Bold。
+% 按照排版规范，但模板使用全角和对应的中文字体。
+% 对于这项更改，我们使用 \pkg{xeCJK} 里的命令来吃掉一点括号的空白。
+%
+% 注：\cs{punctstyle\{banjiao\}} 和 \cs{xeCJKsetup\{PunctStyle = banjiao\}} 和 \cs{ctexset\{punct = banjiao\}}是一样的。
 %    \begin{macrocode}
     \begin{center}
-        % \ziju{-0.05}
-        {\dbsong\fontsize{38bp}{60bp}\selectfont
-        \ifbuct@master{硕}\else{博}\fi{}士研究生学位论文}
+        \ifbuct@bachelor
+            \ziju{0.15}\xbsong\zihao{-0}\CJKfamily+{}{%
+            \punctstyle{banjiao}毕业设计（论文）% (论文)
+            }
+        \else%
+            %\ziju{-0.05}
+            \dbsong\fontsize{38bp}{60bp}\selectfont
+            \ifbuct@master{硕}\else{博}\fi{}士研究生学位论文
+        \fi
     \end{center}
-        \vspace{76bp}
 %    \end{macrocode}
 %
-% 论文信息。
-%    \begin{macrocode}
-    \begin{center}
-        \fontsize{20}{36}\selectfont
-%    \end{macrocode}
+% 对于论文标题之下的部分，我们将本科和硕博分开设置。
 %
-% 禁用下划线的断点，调整粗细。
+% 本科封面有两条横贯页面的横线，位于纸张顶部向下 \SI{10}{\centi\metre} 左右，
+% 我们用 \pkg{textpos} 的 \env{textblock} 环境定位，用 \pkg{tikz} 将它们画出来。
+% 两条线的间距取 \SI{0.2}{\centi\metre}。
 %    \begin{macrocode}
-        \xeCJKsetup{
-            underline = {
-                skip      = false, 
-                thickness = 1.2pt,
-            }
-        }
+    \ifbuct@bachelor
+            \setlength{\TPHorizModule}{1cm}
+            \setlength{\TPVertModule}{1cm}
+            \begin{textblock}{0}(0,10)
+                \noindent%
+                \tikz[line width=1.2pt] \draw (0,0) -- (21,0) (0,0.2) -- (21,0.2);
+            \end{textblock}
+            \vspace{72bp}
 %    \end{macrocode}
 %
-% 使用一个表格来排版论文的信息。
+% 接下来书写题目。先使用 \pkg{xeCJK} 的功能来禁用下划线的断点，并调整其粗细。
 %    \begin{macrocode}
-        \begin{tabular}{
-            >{\begin{CJKfilltwosides}[b]{4\ccwd}\sffamily\bfseries}r%
-            <{\end{CJKfilltwosides}}%
-            @{}>{\enspace\zihao{3}\bfseries}l%
-            <{\vspace{.2em}}%
-        }
+            \begin{center}
+                \xeCJKsetup{
+                    underline = {
+                        skip      = false,
+                        thickness = 1.4pt,
+                    }
+                }
 %    \end{macrocode}
 %
+% 然后是“题目”及其内容。
 % 题目需要手动断行，且长度控制在 \SI{36}{em} 以内。
 % 因表格本身的横线与文字间距较大，这里采用下划线的方式来划线。
-%    \begin{macrocode}
-            题目     & \buct@title@ul{\buct@titleA}\\
-                    &\buct@title@ul{\buct@titleB}\\
-            专业     & \buct@title@ul{\zihao{4}\buct@major}\\
-            研究生   & \buct@title@ul{\zihao{4}\buct@author}\\
-            指导教师 & \buct@title@ul{\zihao{4}\buct@supervisor}\\
-        \end{tabular}
-    \end{center}
+% 注意这里我们要判断题目是否有第二行（即 \cs{buct@titleB} 是否有值）
+% 来输出一行还是两行题目。
+%    \begin{macrocode}
+                \renewcommand{\arraystretch}{2}
+                \begin{tabular}{%
+                        >{\zihao{-2}\xbsong}l
+                        >{\zihao{3}\bfseries}l
+                }
+                    题\hspace{\ccwd}目  & \buct@title@ul{\buct@titleA}\\
+                    \ifthenelse{\equal{\buct@titleB}{}}{\relax}{
+                                        & \buct@title@ul{\buct@titleB}\\
+                    }
+                \end{tabular}
+                \vskip144bp\zihao{3}
+%    \end{macrocode}
+%
+% 使用一个表格来排版论文的信息，如前定义 \cs{buct@major@ul} 所述，这里横线的宽度取“专业”内容的宽度。
+%    \begin{macrocode}
+                \begin{tabular}{
+                        >{\begin{CJKfilltwosides}[b]{4\ccwd}\xbsong}r%
+                            <{\end{CJKfilltwosides}}%
+                        @{}>{\enspace\zihao{4}\bfseries}l%
+                        <{\vspace{.2em}}%
+                    }
+                    专业     & \buct@major@ul{\buct@major}\\
+                    学生   & \buct@major@ul{\buct@author}\\
+                    指导教师 & \buct@major@ul{\buct@supervisor}\\
+                \end{tabular}
+            \end{center}
 %    \end{macrocode}
 %
 % 在页面底部书写日期。
 %    \begin{macrocode}
-    \vfill{%
-        \begin{center}%
-            \buct@format@date{\@zhdate}%
-        \end{center}%
-    }
+            \vfill{%
+                \begin{center}%
+                    \buct@format@date{\@zhdate}%
+                \end{center}%
+            }
+%    \end{macrocode}
+%
+%   硕博论文的处理方式与本科相似。
+%    \begin{macrocode}
+    \else
+        \vspace{76bp}
+        \begin{center}
+            \fontsize{20}{36}\selectfont
+            \xeCJKsetup{
+                underline = {
+                    skip      = false,
+                    thickness = 1.2pt,
+                }
+            }
+            \begin{tabular}{
+                >{\begin{CJKfilltwosides}[b]{4\ccwd}\sffamily\bfseries}r%
+                <{\end{CJKfilltwosides}}%
+                @{}>{\enspace\zihao{3}\bfseries}l%
+                <{\vspace{.2em}}%
+            }
+                题目     & \buct@title@ul{\buct@titleA}\\
+                \ifthenelse{\equal{\buct@titleB}{}}{\relax}{
+                                        & \buct@title@ul{\buct@titleB}\\
+                }
+                专业     & \buct@title@ul{\zihao{4}\buct@major}\\
+                研究生   & \buct@title@ul{\zihao{4}\buct@author}\\
+                指导教师 & \buct@title@ul{\zihao{4}\buct@supervisor}\\
+            \end{tabular}
+        \end{center}
+        \vfill{%
+            \begin{center}%
+                \buct@format@date{\@zhdate}%
+            \end{center}%
+        }
+    \fi
 }
 %    \end{macrocode}
 % \end{macro}
@@ -2322,15 +2482,13 @@
 % 文档命令 \cs{makecover} 类似 \cs{makedeclare}，
 % 接受一个可选参数用于插入扫描页，否则调用 \cs{buct@makecover} 生成封面。
 %    \begin{macrocode}
-\ifbuct@bachelor\relax\else
-    \NewDocumentCommand{\makecover}{ o }{%
+\NewDocumentCommand{\makecover}{ o }{%
     \hypertarget{cover}{}
     \pdfbookmark{封面}{cover}
         \IfNoValueTF{#1}{\buct@makecover}{%
             \includepdf[pages=-]{#1}
         }
-    }
-\fi
+}
 %</cover>
 %    \end{macrocode}
 % \end{macro}
diff --git a/Master/texmf-dist/source/latex/buctthesis/buctthesis.ins b/Master/texmf-dist/source/xelatex/buctthesis/buctthesis.ins
index ada3e84b4a1..4396724f779 100644
--- a/Master/texmf-dist/source/latex/buctthesis/buctthesis.ins
+++ b/Master/texmf-dist/source/xelatex/buctthesis/buctthesis.ins
@@ -1,5 +1,5 @@
 %%
-%% Copyright (C) 2019-2021 by Miracle0565
+%% Copyright (C) 2019-2022 by Miracle0565
 %%
 %%     https://github.com/Miracle0565/BUCTthesis
 %%
diff --git a/Master/texmf-dist/tex/latex/buctthesis/buctcover.cls b/Master/texmf-dist/tex/latex/buctthesis/buctcover.cls
deleted file mode 100644
index 93c2e9cc8c9..00000000000
--- a/Master/texmf-dist/tex/latex/buctthesis/buctcover.cls
+++ /dev/null
@@ -1,155 +0,0 @@
-%%
-%% This is file `buctcover.cls',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% buctthesis.dtx  (with options: `cover')
-%% 
-%% This is a generated file.
-%% 
-%% Copyright (C) 2019-2022 by Miracle0565
-%% 
-%%     https://github.com/Miracle0565/BUCTthesis
-%% 
-%% This file may be distributed and/or modified under
-%% the conditions of the LaTeX Project Public License,
-%% either version 1.3c of this license or (at your option)
-%% any later version. The latest version of this license
-%% is in:
-%% 
-%%     http://www.latex-project.org/lppl.txt
-%% 
-%% and version 1.3c or later is part of all distributions
-%% of LaTeX version 1999/12/01 or later.
-%% 
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-\ProvidesClass{buctcover}[2021/04/24 Cover Maker for BUCTthesis]
-\RequirePackage{ifxetex}
-\RequireXeTeX
-\RequirePackage{kvoptions}
-\SetupKeyvalOptions{
-    family   = buct,
-    prefix   = buct@,
-    setkeys  = \kvsetkeys,
-}
-\newif\ifbuct@bachelor\buct@bachelorfalse
-\newif\ifbuct@master\buct@masterfalse
-\newif\ifbuct@doctor\buct@doctorfalse
-\define@key{buct}{type}{\expandafter\csname buct@#1true\endcsname}
-\DeclareDefaultOption{\PassOptionsToClass{\CurrentOption}{ctexbook}}
-\ProcessKeyvalOptions*
-\PassOptionsToPackage{quiet}{xeCJK}
-\LoadClass[zihao=-4]{ctexbook}
-\ifbuct@bachelor%
-    \ClassError{buctcover}{%
-        type `bachelor' is unavailable. \MessageBreak%
-        type = [ master | doctor ]%
-    }{}\else
-    \ifbuct@master\relax\else
-        \ifbuct@doctor\relax\else
-            \ClassError{buctthesis}{%
-                Specified thesis type is obligatory: \MessageBreak%
-                type = [ master | doctor ]%
-            }{}
-\fi\fi\fi
-\newcommand{\coversetup}[1]{\kvsetkeys{buct}{#1}}
-\DeclareStringOption[学号未定义]{studentid}
-\DeclareStringOption[题目首行未定义]{titleA}
-\DeclareStringOption[题目次行未定义]{titleB}
-\DeclareStringOption[专业未定义]{major}
-\DeclareStringOption[作者未定义]{author}
-\DeclareStringOption[导师未定义]{supervisor}
-\DeclareStringOption[\the\year-\two@digits{\month}-\two@digits{\day}]{date}
-\RequirePackage[a4paper,nomarginpar,
-    top = 2.1cm, bottom = 2.2cm, left = 2cm, right = 2cm,
-    headheight = 0cm, footskip = 0cm
-]{geometry}
-\RequirePackage{array,graphicx,calc,hyperref}
-\pagestyle{empty}
-\xeCJKsetup{EmboldenFactor=2.3}
-\setCJKmainfont{SimSun}[AutoFakeBold]
-\setCJKsansfont{SimHei}[AutoFakeBold]
-\newCJKfontfamily[xingkai]\xingkai{STXingkai}
-\newCJKfontfamily[zhkai]  \zhkai  {KaiTi} [AutoFakeBold]
-\newCJKfontfamily[xbsong] \xbsong {FZXiaoBiaoSong-B05S}
-\newCJKfontfamily[dbsong] \dbsong {FZDaBiaoSong-B06S}
-\newcommand\buct@title@ul[1]{%
-    \CJKunderline{\makebox[\widthof{\buct@titleA\enspace}][l]{#1}}
-}
-\newcommand\buct@format@date[1]{%
-    \edef\buct@@date{\buct@date}%
-    \def\buct@@process@date##1-##2-##3\@nil{%
-        #1{##1}{##2}{##3}%
-    }%
-    \expandafter\buct@@process@date\buct@@date\@nil
-}
-\newcommand\@zhdate[3]{%
-    \Large\bfseries\zhkai\ziju{.1}%
-    日\hspace{1.5\ccwd}期：\zhdigits{#1}年\zhnumber{#2}月\zhnumber{#3}日%
-}
-\newcommand{\buct@makecover}{%
-    \begin{table}[h]
-        \renewcommand{\arraystretch}{1.3}
-        \raggedleft\large
-        \begin{tabular}{l@{}l}
-            \xbsong 单位代码 & ：\CJKfamily+{zhsong}\mbox{10010}\\
-            \xbsong 学\hspace{2\ccwd}号 & ：\CJKfamily+{zhsong}\mbox{\buct@studentid}\\
-        \end{tabular}
-    \end{table}
-    \vspace{26bp}
-    \begin{minipage}[c][][c]{2.35cm}
-        \includegraphics[width = 2.35cm]{BUCT-badge.pdf}
-    \end{minipage}
-    \qquad
-    \begin{minipage}[c][2.35cm][c]{9cm}
-        \ziju{-0.02}\xingkai\zihao{0}{北京化工大学}
-    \end{minipage}
-    \vspace{18bp}
-    \begin{center}
-        % \ziju{-0.05}
-        {\dbsong\fontsize{38bp}{60bp}\selectfont
-        \ifbuct@master{硕}\else{博}\fi{}士研究生学位论文}
-    \end{center}
-        \vspace{76bp}
-    \begin{center}
-        \fontsize{20}{36}\selectfont
-        \xeCJKsetup{
-            underline = {
-                skip      = false,
-                thickness = 1.2pt,
-            }
-        }
-        \begin{tabular}{
-            >{\begin{CJKfilltwosides}[b]{4\ccwd}\sffamily\bfseries}r%
-            <{\end{CJKfilltwosides}}%
-            @{}>{\enspace\zihao{3}\bfseries}l%
-            <{\vspace{.2em}}%
-        }
-            题目     & \buct@title@ul{\buct@titleA}\\
-                    &\buct@title@ul{\buct@titleB}\\
-            专业     & \buct@title@ul{\zihao{4}\buct@major}\\
-            研究生   & \buct@title@ul{\zihao{4}\buct@author}\\
-            指导教师 & \buct@title@ul{\zihao{4}\buct@supervisor}\\
-        \end{tabular}
-    \end{center}
-    \vfill{%
-        \begin{center}%
-            \buct@format@date{\@zhdate}%
-        \end{center}%
-    }
-}
-\ifbuct@bachelor\relax\else
-    \NewDocumentCommand{\makecover}{ o }{%
-    \hypertarget{cover}{}
-    \pdfbookmark{封面}{cover}
-        \IfNoValueTF{#1}{\buct@makecover}{%
-            \includepdf[pages=-]{#1}
-        }
-    }
-\fi
-\endinput
-%%
-%% End of file `buctcover.cls'.
diff --git a/Master/texmf-dist/tex/xelatex/buctthesis/buctcover.cls b/Master/texmf-dist/tex/xelatex/buctthesis/buctcover.cls
new file mode 100644
index 00000000000..45076bb122e
--- /dev/null
+++ b/Master/texmf-dist/tex/xelatex/buctthesis/buctcover.cls
@@ -0,0 +1,229 @@
+%%
+%% This is file `buctcover.cls',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% buctthesis.dtx  (with options: `cover')
+%% 
+%% This is a generated file.
+%% 
+%% Copyright (C) 2019-2022 by Miracle0565
+%% 
+%%     https://github.com/Miracle0565/BUCTthesis
+%% 
+%% This file may be distributed and/or modified under
+%% the conditions of the LaTeX Project Public License,
+%% either version 1.3c of this license or (at your option)
+%% any later version. The latest version of this license
+%% is in:
+%% 
+%%     http://www.latex-project.org/lppl.txt
+%% 
+%% and version 1.3c or later is part of all distributions
+%% of LaTeX version 1999/12/01 or later.
+%% 
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesClass{buctcover}[2022/06/21 Cover Maker for BUCTthesis]
+\RequirePackage{ifxetex}
+\RequireXeTeX
+\RequirePackage{kvoptions}
+\SetupKeyvalOptions{
+    family   = buct,
+    prefix   = buct@,
+    setkeys  = \kvsetkeys,
+}
+\newif\ifbuct@bachelor\buct@bachelorfalse
+\newif\ifbuct@master\buct@masterfalse
+\newif\ifbuct@doctor\buct@doctorfalse
+\define@key{buct}{type}{\expandafter\csname buct@#1true\endcsname}
+\DeclareDefaultOption{\PassOptionsToClass{\CurrentOption}{ctexbook}}
+\ProcessKeyvalOptions*
+\PassOptionsToPackage{quiet}{xeCJK}
+\LoadClass[zihao=-4]{ctexbook}
+\ifbuct@bachelor\relax\else
+    \ifbuct@master\relax\else
+        \ifbuct@doctor\relax\else
+            \ClassError{buctthesis}{%
+                Specified thesis type is obligatory: \MessageBreak%
+                type = [ bachelor | master | doctor ]%
+            }{}
+\fi\fi\fi
+\newcommand{\coversetup}[1]{\kvsetkeys{buct}{#1}}
+\DeclareStringOption[班级未定义]{class}
+\DeclareStringOption[学号未定义]{studentid}
+\DeclareStringOption[题目首行未定义]{titleA}
+\DeclareStringOption{titleB}
+\DeclareStringOption[专业未定义]{major}
+\DeclareStringOption[作者未定义]{author}
+\DeclareStringOption[导师未定义]{supervisor}
+\DeclareStringOption[\the\year-\two@digits{\month}-\two@digits{\day}]{date}
+\RequirePackage[a4paper,nomarginpar,
+    top = 2.1cm, bottom = 2.2cm, left = 2cm, right = 2cm,
+    headheight = 0cm, footskip = 0cm
+]{geometry}
+\RequirePackage{xeCJKfntef}
+\RequirePackage{array,graphicx,calc,tikz,xifthen,hyperref}
+\RequirePackage[absolute,overlay]{textpos}
+\pagestyle{empty}
+\xeCJKsetup{EmboldenFactor=2.3}
+\setCJKmainfont{SimSun}[AutoFakeBold]
+\setCJKsansfont{SimHei}[AutoFakeBold]
+\newCJKfontfamily[xingkai]\xingkai{STXingkai}
+\newCJKfontfamily[zhkai]  \zhkai  {KaiTi} [AutoFakeBold]
+\newCJKfontfamily[xbsong] \xbsong {FZXiaoBiaoSong-B05S}
+\newCJKfontfamily[dbsong] \dbsong {FZDaBiaoSong-B06S}
+\setmainfont{Times New Roman}
+\newcommand\buct@title@ul[1]{%
+    \CJKunderline{\makebox[\widthof{\buct@titleA\enspace}][l]{#1}}
+}
+\newcommand\buct@major@ul[1]{%
+    \CJKunderline{\makebox[\widthof{\buct@major\quad}][c]{#1}}
+}
+\newcommand\buct@format@date[1]{%
+    \edef\buct@@date{\buct@date}%
+    \def\buct@@process@date##1-##2-##3\@nil{%
+        #1{##1}{##2}{##3}%
+    }%
+    \expandafter\buct@@process@date\buct@@date\@nil
+}
+\newcommand\@zhdate[3]{%
+    \bfseries\zhkai
+    \ifbuct@bachelor
+        \zihao{4}
+        #1年\makebox[1.5em]{#2}月\makebox[1.5em]{#3}日
+    \else
+        \Large\ziju{.1}%
+        日\hspace{1.5\ccwd}期：\zhdigits{#1}年\zhnumber{#2}月\zhnumber{#3}日%
+    \fi
+}
+\newcommand{\buct@makecover}{%
+    \begin{table}[h]
+        \raggedleft
+        \ifbuct@bachelor
+            \songti\zihao{5}
+        \else
+            \renewcommand{\arraystretch}{1.3}\large
+        \fi
+        \begin{tabular}{l@{}l}
+            \ifbuct@bachelor%
+                班\hspace{2\ccwd}级&：\CJKfamily+{zhsong}\buct@class\hspace*{2\ccwd}\\
+                学\hspace{2\ccwd}号&：\CJKfamily+{zhsong}\buct@studentid\hspace*{2\ccwd}\\
+            \else%
+                \xbsong 单位代码 & ：\CJKfamily+{zhsong}\mbox{10010}\\
+                \xbsong 学\hspace{2\ccwd}号 & ：\CJKfamily+{zhsong}\mbox{\buct@studentid}\\
+            \fi
+        \end{tabular}
+    \end{table}
+    \ifbuct@bachelor\vspace{3bp}\else\vspace{26bp}\fi
+    \begin{minipage}[c][][c]{2.35cm}
+        \includegraphics[width = 2.35cm]{BUCT-badge.pdf}
+    \end{minipage}
+    \qquad
+    \begin{minipage}[c][2.35cm][c]{9cm}
+        \xingkai
+        \ifbuct@bachelor
+            \ziju{0.1}\hspace*{0.8\ccwd}\zihao{-0}
+        \else
+            \ziju{-0.02}\zihao{0}
+        \fi
+        {北京化工大学}
+    \end{minipage}
+    \ifbuct@bachelor\vspace{12bp}\else\vspace{18bp}\fi
+    \begin{center}
+        \ifbuct@bachelor
+            \ziju{0.15}\xbsong\zihao{-0}\CJKfamily+{}{%
+            \punctstyle{banjiao}毕业设计（论文）% (论文)
+            }
+        \else%
+            %\ziju{-0.05}
+            \dbsong\fontsize{38bp}{60bp}\selectfont
+            \ifbuct@master{硕}\else{博}\fi{}士研究生学位论文
+        \fi
+    \end{center}
+    \ifbuct@bachelor
+            \setlength{\TPHorizModule}{1cm}
+            \setlength{\TPVertModule}{1cm}
+            \begin{textblock}{0}(0,10)
+                \noindent%
+                \tikz[line width=1.2pt] \draw (0,0) -- (21,0) (0,0.2) -- (21,0.2);
+            \end{textblock}
+            \vspace{72bp}
+            \begin{center}
+                \xeCJKsetup{
+                    underline = {
+                        skip      = false,
+                        thickness = 1.4pt,
+                    }
+                }
+                \renewcommand{\arraystretch}{2}
+                \begin{tabular}{%
+                        >{\zihao{-2}\xbsong}l
+                        >{\zihao{3}\bfseries}l
+                }
+                    题\hspace{\ccwd}目  & \buct@title@ul{\buct@titleA}\\
+                    \ifthenelse{\equal{\buct@titleB}{}}{\relax}{
+                                        & \buct@title@ul{\buct@titleB}\\
+                    }
+                \end{tabular}
+                \vskip144bp\zihao{3}
+                \begin{tabular}{
+                        >{\begin{CJKfilltwosides}[b]{4\ccwd}\xbsong}r%
+                            <{\end{CJKfilltwosides}}%
+                        @{}>{\enspace\zihao{4}\bfseries}l%
+                        <{\vspace{.2em}}%
+                    }
+                    专业     & \buct@major@ul{\buct@major}\\
+                    学生   & \buct@major@ul{\buct@author}\\
+                    指导教师 & \buct@major@ul{\buct@supervisor}\\
+                \end{tabular}
+            \end{center}
+            \vfill{%
+                \begin{center}%
+                    \buct@format@date{\@zhdate}%
+                \end{center}%
+            }
+    \else
+        \vspace{76bp}
+        \begin{center}
+            \fontsize{20}{36}\selectfont
+            \xeCJKsetup{
+                underline = {
+                    skip      = false,
+                    thickness = 1.2pt,
+                }
+            }
+            \begin{tabular}{
+                >{\begin{CJKfilltwosides}[b]{4\ccwd}\sffamily\bfseries}r%
+                <{\end{CJKfilltwosides}}%
+                @{}>{\enspace\zihao{3}\bfseries}l%
+                <{\vspace{.2em}}%
+            }
+                题目     & \buct@title@ul{\buct@titleA}\\
+                \ifthenelse{\equal{\buct@titleB}{}}{\relax}{
+                                        & \buct@title@ul{\buct@titleB}\\
+                }
+                专业     & \buct@title@ul{\zihao{4}\buct@major}\\
+                研究生   & \buct@title@ul{\zihao{4}\buct@author}\\
+                指导教师 & \buct@title@ul{\zihao{4}\buct@supervisor}\\
+            \end{tabular}
+        \end{center}
+        \vfill{%
+            \begin{center}%
+                \buct@format@date{\@zhdate}%
+            \end{center}%
+        }
+    \fi
+}
+\NewDocumentCommand{\makecover}{ o }{%
+    \hypertarget{cover}{}
+    \pdfbookmark{封面}{cover}
+        \IfNoValueTF{#1}{\buct@makecover}{%
+            \includepdf[pages=-]{#1}
+        }
+}
+\endinput
+%%
+%% End of file `buctcover.cls'.
diff --git a/Master/texmf-dist/tex/latex/buctthesis/buctthesis.cls b/Master/texmf-dist/tex/xelatex/buctthesis/buctthesis.cls
index b1f62a11896..3e64c386685 100644
--- a/Master/texmf-dist/tex/latex/buctthesis/buctthesis.cls
+++ b/Master/texmf-dist/tex/xelatex/buctthesis/buctthesis.cls
@@ -26,7 +26,7 @@
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
 \NeedsTeXFormat{LaTeX2e}[1999/12/01]
-\ProvidesClass{buctthesis}[2021/09/10 v1.2 BUCT Thesis Template]
+\ProvidesClass{buctthesis}[2022/07/29 v1.4.1 BUCT Thesis Template]
 \RequirePackage{ifxetex}
 \RequireXeTeX
 \RequirePackage{kvoptions}
@@ -116,7 +116,10 @@
     \setCJKsansfont{SimHei}[AutoFakeBold]
 }
 {
-    \ClassWarning{buctthesis}{The fonts differ to the default.}
+    \ClassWarning{buctthesis}{%
+        The fonts differ to the default.\MessageBreak%
+        Use fontset = windows to correct.%
+    }
 }
 \newcommand{\bfsong}{\bfseries}
 \newcommand{\bfhei}{\sffamily\bfseries}
@@ -187,7 +190,8 @@
     \newcommand{\buct@sssecfont}{\buct@ssecfont}
 \fi
 \newcommand{\buct@floatfont}{\zihao{5}}
-\newcommand{\buct@float@captionfont}{\zihao{5}\songti}
+\newcommand{\buct@float@captionfont}{\zihao{5}\mdseries}
+\newcommand{\buct@float@labelfont}{\zihao{5}\mdseries}
 \newcommand{\buct@codefont}{\ttfamily\songti\zihao{5}}
 \newcommand{\buct@codecomfont}{%
     \ttfamily\slshape
@@ -258,14 +262,14 @@
         可以允许采用影印、缩印或其它复制手段保存、汇编学位论文。
 
         $\Box$ 论文暂不公开（或保密）注释：本学位论文属于暂不公开
-        （或保密）范围，在\rule{1.5em}{.6pt}年解密后适用本授权书。
+        （或保密）范围，在\rule{1.5em}{.4pt}年解密后适用本授权书。
 
         $\Box$ 非暂不公开（或保密）论文注释：本学位论文不属于暂不公开
         （或保密）范围，适用本授权书。
     }
     \newcommand\buct@dcl@pdf{版权页}
-    \newcommand\buct@sign@author{作者签名：\rule{7em}{.6pt}\qquad{日期：}\rule{7em}{.6pt}}
-    \newcommand\buct@sign@supervisor{导师签名：\rule{7em}{.6pt}\qquad{日期：}\rule{7em}{.6pt}}
+    \newcommand\buct@sign@author{作者签名：\rule{7em}{.4pt}\qquad{日期：}\rule{7em}{.4pt}}
+    \newcommand\buct@sign@supervisor{导师签名：\rule{7em}{.4pt}\qquad{日期：}\rule{7em}{.4pt}}
     \newcommand\buct@cabstract@title{摘\hspace{\ccwd}要}
     \newcommand\buct@eabstract@title{ABSTRACT}
     \newcommand\buct@ckeywords@title{关键词：}
@@ -273,6 +277,7 @@
     \newcommand\buct@ckeywords@sep{，}
     \newcommand\buct@ekeywords@sep{,~}
     \newcommand\buct@content@title{目\hspace{\ccwd}录}
+    \newcommand\buct@econtent@chapter{Chapter~}
     \newcommand\econtentsname{Contents}
     \newcommand\buct@deno@title{符号和缩略词说明}
     \newcommand\buct@ack@title{致谢}
@@ -321,24 +326,14 @@
     \else{
         \thispagestyle{empty}
         \linespread{1.5534}
-        \setlength{\parskip}{9pt}
-        \begin{center}
-            \buct@dcl@titlefont\buct@dcl@title
-        \end{center}
-
-        \buct@dcl@textfont\buct@dcl@text
-
-        \vspace{6pt}\buct@sign@author\vspace{6pt}
-
-        \begin{center}
-            \buct@auth@titlefont\buct@auth@title
-        \end{center}
-
-        \buct@auth@textfont\buct@auth@text
-
-        \vspace{6pt}\buct@sign@author
-
-        \vspace{6pt}\buct@sign@supervisor
+        \setlength{\parskip}{15pt}
+        \centerline{\buct@dcl@titlefont\buct@dcl@title}
+        \par\indent\buct@dcl@textfont\buct@dcl@text
+        \par\indent\buct@sign@author\\[30pt]
+        \centerline{\buct@auth@titlefont\buct@auth@title}
+        \par\indent\buct@auth@textfont\buct@auth@text
+        \par\indent\buct@sign@author
+        \par\indent\buct@sign@supervisor
     }\fi
     \clearpage\normalsize
 }
@@ -388,7 +383,7 @@
         \ClassError{buctthesis}{Too many \protect\taskitem\space used}%
         {Keep \protect\taskitem\space no more than 4 times.}\fi
     }
-    \newcommand{\taskitem}{\vspace{1em}\noindent\buct@taskitem\par}
+    \newcommand{\taskitem}{\vspace{6pt}\noindent\buct@taskitem\par}
 \fi
 \newenvironment{bibenumerate}{%
     \begin{enumerate}[label={[\arabic*]},leftmargin=3em]
@@ -470,7 +465,7 @@
     \newcommand\buct@addengcontents[3]{%
         \addcontentsline{toce}{#1}{\protect\numberline{#3\@nameuse{the#1}}#2}
     }
-    \newcommand\echapter[1]{\buct@addengcontents{chapter}{#1}{\buct@toce@chapfont}}
+    \newcommand\echapter[1]{\buct@addengcontents{chapter}{#1}{\buct@toce@chapfont{}\buct@econtent@chapter}}
     \newcommand\esection[1]{\buct@addengcontents{section}{#1}{}}
     \newcommand\esubsection[1]{\buct@addengcontents{subsection}{#1}{}}
     \newcommand\esubsubsection[1]{\buct@addengcontents{subsubsection}{#1}{}}
@@ -666,7 +661,7 @@
 \sisetup{%
     list-final-separator = { 和 },
     list-pair-separator = { 和 },
-    range-phrase = {$\sim$},
+    range-phrase = {\,$\sim$\,},
 }
 \ifbuct@bachelor
     \newfloat{dfigure}{htbp}{lodf}[chapter]
@@ -682,15 +677,15 @@
     \AtBeginEnvironment{tabular}{\buct@floatfont}
     \AtBeginEnvironment{tabularx}{\buct@floatfont}
 \fi
+\ifbuct@bachelor\relax\else
     \let\oldlongtable\longtable
     \let\endoldlongtable\endlongtable
-\ifbuct@bachelor\relax\else
     \def\longtable{\zihao{5}\oldlongtable}
     \AtEndEnvironment{longtable}{\normalsize}
 \fi
 \graphicspath{{figure/}}
 \renewcommand{\captionfont}{\buct@float@captionfont}
-\renewcommand{\captionlabelfont}{\buct@float@captionfont}
+\renewcommand{\captionlabelfont}{\buct@float@labelfont}
 \DeclareCaptionLabelSeparator{capspace}{\quad}
 \captionsetup{labelsep=capspace}
 \captionsetup[table]{%
@@ -712,7 +707,7 @@
     \renewcommand{\thesubtable}{(\alph{subtable})}
     \renewcommand{\thetable}{\thechapter-\arabic{table}}
     \renewcommand{\thesubfigure}{(\alph{subfigure})}
-    \renewcommand{\thefigure}{\arabic{chapter}-\arabic{figure}}
+    \renewcommand{\thefigure}{\thechapter-\arabic{figure}}
     \ifbuct@bachelor
         \renewcommand{\thedfigure}{\thechapter-\arabic{dfigure}}
         \renewcommand{\theequation}{\thechapter-\arabic{equation}}
@@ -722,6 +717,8 @@
     \fi
     \renewcommand{\thelstlisting}{\thechapter-\arabic{lstlisting}}
 }
+\DeclareRobustCommand\inlinecite{\@inlinecite}
+\def\@inlinecite#1{\begingroup\let\@cite\NAT@citenum\citep{#1}\endgroup}
 \ifbuct@bachelor\relax\else
     \xpatchcmd{\dotfill}{.44em}{.3em}{}{}
     \renewenvironment{equation}{
@@ -770,6 +767,7 @@
         \addcontentsline{toc}{chapter}{\buct@trans@title}
     }{}
 \else
+    \g@addto@macro\appendix{\def\buct@econtent@chapter{Appendix~}}
     \newenvironment{achievements}{%
         \cleardoublepage
         \chapter*{\buct@achi@title}
@@ -814,7 +812,6 @@
 \fi
 \renewcommand{\emph}[1]{\textbf{#1}}
 \renewcommand{\em}{\bfsong}
-
 \newcommand{\buct@ftntcircled}[1]{%
     \lower 0.15em\hbox{%
         \tikz\draw (0pt, 0pt) circle (0.4 em) node {#1};%