chemstyle 1.2 (8mar08)

git-svn-id: svn://tug.org/texlive/trunk@6903 c570f23f-e606-0410-a88d-b1316a301751

14 files changed, 1399 insertions, 1084 deletions

diff --git a/Master/texmf-dist/doc/latex/chemstyle/chemstyle.pdf b/Master/texmf-dist/doc/latex/chemstyle/chemstyle.pdf
index 3657ad962be..b78ced85f8e 100644
--- a/Master/texmf-dist/doc/latex/chemstyle/chemstyle.pdf
+++ b/Master/texmf-dist/doc/latex/chemstyle/chemstyle.pdf
diff --git a/Master/texmf-dist/source/latex/chemstyle/chemstyle.dtx b/Master/texmf-dist/source/latex/chemstyle/chemstyle.dtx
index f78c0fc6f74..49b5bff4d60 100644
--- a/Master/texmf-dist/source/latex/chemstyle/chemstyle.dtx
+++ b/Master/texmf-dist/source/latex/chemstyle/chemstyle.dtx
@@ -1,15 +1,15 @@
 % \iffalse meta-comment
 %
-% Copyright (C) 2007 by
+% Copyright (C) 2007-08 by
 %    Joseph Wright <joseph.wright@morningstar2.co.uk>
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either
-% version 1.3 of this license or (at your option) any later
+% version 1.3c of this license or (at your option) any later
 % version. The latest version of this license is in
 %    http://www.latex-project.org/lppl.txt
-% and version 1.3 or later is part of all distributions of
-% LaTeX version 2003/12/01 or later.
+% and version 1.3c or later is part of all distributions of
+% LaTeX version 2005/12/01 or later.
 %
 % This work has the LPPL maintenance status ``maintained.''
 %
@@ -19,6 +19,7 @@
 %                 and the derived files chemstyle.ins,
 %                                       chemstyle.sty,
 %                                       chemstyle.pdf,
+%                                       chemstyle.ltx,
 %                                       rsc.jdf,
 %                                       angew.jdf,
 %                                       tetlett.jdf,
@@ -79,17 +80,17 @@
  The chemstyle package --- Writing chemistry with style
  Maintained by Joseph Wright
  E-mail: joseph.wright@morningstar2.co.uk
- Released under the LaTeX Project Public License v1.3 or later
+ Released under the LaTeX Project Public License v1.3c or later
  See http://www.latex-project.org/lppl.txt
  ----------------------------------------------------------------
 
 \endpreamble
 \Msg{Generating chemstyle files:}
-\usedir{tex/latex/contib/chemstyle}
+\usedir{tex/latex/chemstyle}
 \generate{\file{\jobname.ins}{\from{\jobname.dtx}{install}}
           \file{\jobname.sty}{\from{\jobname.dtx}{package}}
-          \file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}}
 }
+\usedir{tex/latex/chemstyle/config}
 \generate{\file{rsc.jdf}{\from{chemstyle.dtx}{rsc}}
           \file{angew.jdf}{\from{chemstyle.dtx}{angew}}
           \file{tetlett.jdf}{\from{chemstyle.dtx}{tetlett}}
@@ -101,6 +102,9 @@
 }
 \generate{\file{none.jdf}{\from{chemstyle.dtx}{none}}
 }
+\usedir{doc/latex/chemstyle}
+\generate{\file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}}
+}
 \endbatchfile
 %</install>
 %<*ignore>
@@ -115,17 +119,24 @@
 \EnableCrossrefs
 \CodelineIndex
 \RecordChanges
+\usepackage[journal=none,xspace=true]{chemstyle}
 %\OnlyDescription
 % The various formatting commands used in this file are collected
-% together in |jawltxdoc|.
+% together in jawltxdoc.
 \usepackage{jawltxdoc}
+% To show the features of \eg, \ie and so on, a bit of work is 
+% required, as they are defined by jawltxdoc and by chemstyle
+\let\eg\undefined
+\let\ie\undefined
+\let\latin\undefined
+\let\etc\undefined
 \begin{document}
   \DocInput{\jobname.dtx}
 \end{document}
 %</driver>
 % \fi
 %
-%\CheckSum{658}
+%\CheckSum{0}
 %
 % \CharacterTable
 %  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -146,58 +157,75 @@
 % \GetFileInfo{\jobname.sty}
 %
 %\changes{v1.0}{2006/08/06}{Initial release of package}
-%\changes{v1.0b}{2007/09/04}{Added |microtype| and |notes2bib| to
-%  template}
-%\changes{v1.1}{2007/09/17}{License changed from GPL to LPPL}
+%\changes{v1.0b}{2007/09/04}{Added \pkg{microtype} and
+%  \pkg{notes2bib} to template}
+%\changes{v1.1}{2007/09/17}{License changed from \textsc{gpl} to
+%  \textsc{lppl}}
 %\changes{v1.1}{2007/09/17}{Phrases modified to better avoid clash
 %  with user's own commands}
 %\changes{v1.1}{2007/09/17}{Fixed error with spacing after
 %  \emph{e.g.}~and \emph{i.e.}}
+%\changes{v1.1}{2007/09/17}{Added \opt{phrases} option}
+%\changes{v1.1}{2007/09/17}{Added \opt{siunits} option}
+%\changes{v1.1}{2007/09/17}{Added \opt{xspace} option}
 %\changes{v1.1a}{2007/09/18}{Fixed error in documentation compilation
-%  under LaTeX}
+%  under \LaTeX}
 %\changes{v1.1c}{2007/09/23}{Fixed problems with capitalisation
-%  of \texttt{SIunits}}
+%  of \pkg{SIunits}}
 %\changes{v1.1c}{2007/09/23}{Documentation improved}
+%\changes{v1.1c}{2007/09/23}{Added \pkg{SIunits} option}
 %\changes{v1.1e}{2007/10/07}{Fixed packaging problem}
+%\changes{v1.2}{2008/03/07}{Various internal tweaks}
+%\changes{v1.2}{2008/03/07}{Removed obsolete \opt{ch} and
+%  \opt{chapter} options}
+%
+%\setkeys{lst}{language=[LaTeX]{TeX},moretexcs={mmHg,Molar,%
+%  molar,cmc,Hz,unit,standardstate,iPr,nPr,nBu,sBu,tBu,iBu,%
+%  cstsetup,latin,eg,ie,etc,invacuo,etal,floatstyle,restylefloat,%
+%  upsigma,uppi}}
 %
 %\DoNotIndex{\@fs@capt,\@fs@cfont,\@fs@iftopcapt,\@fs@mid,\@fs@post}
-%\DoNotIndex{\@fs@pre,\@ifclassloaded,\@ifnextchar,\@ifpackageloaded}
-%\DoNotIndex{\@undefined,\abovecaptionskip,\addto,\AtBeginDocument}
-%\DoNotIndex{\begin,\begingroup,\belowcaptionskip,\bfseries,\bibname}
-%\DoNotIndex{\captionsetup,\cm,\color,\csname,\CurrentOption}
+%\DoNotIndex{\@fs@pre,\@gobblefour,\@ifclassloaded,\@ifnextchar}
+%\DoNotIndex{\@ifpackagelater,\@ifpackageloaded,\@ifundefined}
+%\DoNotIndex{\@nameuse,\@undefined,\abovecaptionskip,\addto}
+%\DoNotIndex{\AtBeginDocument,\begingroup,\belowcaptionskip}
+%\DoNotIndex{\bfseries,\bibname,\captionsetup,\centi,\cm,\color}
+%\DoNotIndex{\csgappto,\csname,\cubed,\CurrentOption,\deci}
 %\DoNotIndex{\DeclareCaptionFormat,\DeclareCaptionLabelSeparator}
-%\DoNotIndex{\DeclareOption,\DeclareRobustCommand,\def}
-%\DoNotIndex{\documentclass,\edef,\else,\emph,\end,\endcsname}
-%\DoNotIndex{\endgroup,\ensuremath,\ExecuteOptions,\expandafter}
-%\DoNotIndex{\femtogram,\fg,\fi,\figurename,\floatc@plain}
+%\DoNotIndex{\DeclareMathSymbol,\DeclareOptionX}
+%\DoNotIndex{\DeclareRobustCommand,\DeclareSymbolFont,\def}
+%\DoNotIndex{\define@boolkey,\define@choicekey,\define@cmdkeys}
+%\DoNotIndex{\define@key,\dm,\edef,\else,\emph,\endcsname}
+%\DoNotIndex{\endgroup,\endinput,\ensuremath,\ExecuteOptionsX}
+%\DoNotIndex{\expandafter,\fi,\figurename,\floatc@plain}
 %\DoNotIndex{\floatc@ruled,\floatcontentscentre,\floatplacement}
-%\DoNotIndex{\floatstyle,\hertz,\hrule,\iffalse,\iftrue,\ifx,\input}
-%\DoNotIndex{\InputIfFileExists,\kern,\labelformat,\languagename}
-%\DoNotIndex{\let,\MakeUppercase,\MessageBreak,\NeedsTeXFormat}
-%\DoNotIndex{\newcommand,\newfloat,\newif,\newunit,\PackageInfo}
-%\DoNotIndex{\PackageWarning,\PassOptionsToPackage,\ProcessOptions}
-%\DoNotIndex{\providecommand,\ProvidesFile,\ProvidesPackage,\quad}
-%\DoNotIndex{\refname,\relax\renewcommand,\RequirePackage}
-%\DoNotIndex{\restylefloat,\rotatebox,\selectlanguage,\space}
-%\DoNotIndex{\tablename,\textsc,\textsuperscript,\unitsep}
-%\DoNotIndex{\unitsuperscript,\usepackage,\varnothing,\vspace}
-%\DoNotIndex{\xspace,\@tempa,\@tempb,\centi,\cubed,\deci}
-%\DoNotIndex{\DeclareMathSymbol,\DeclareSymbolFont,\dm}
-%\DoNotIndex{\mathord,\metre,\milli,\mole,\relax,\spacefactor}
-%\DoNotIndex{\usk,\futurelet,\@ifundefined}
-%
-% \title{\texttt{chemstyle} --- Writing chemistry with style%
+%\DoNotIndex{\floatstyle,\futurelet,\gdef,\hertz,\hrule,\iffalse}
+%\DoNotIndex{\ifnum,\iftrue,\ifx,\input,\InputIfFileExists}
+%\DoNotIndex{\kern,\labelformat,\languagename,\let,\makeatletter}
+%\DoNotIndex{\makeatother,\MakeUppercase,\mathord,\MessageBreak}
+%\DoNotIndex{\metre,\milli,\mmHg,\mole,\NeedsTeXFormat,\newcommand}
+%\DoNotIndex{\newcounter,\newfloat,\newif,\newunit,\OrgLettColour}
+%\DoNotIndex{\PackageError,\PackageInfo,\PackageWarning}
+%\DoNotIndex{\PassOptionsToPackage,\ProcessOptionsX,\providecommand}
+%\DoNotIndex{\ProvidesFile,\ProvidesPackage,\quad,\refname,\relax}
+%\DoNotIndex{\renewcommand,\RequirePackage,\restylefloat,\rotatebox}
+%\DoNotIndex{\rpcubed,\schemename,\selectlanguage,\setkeys}
+%\DoNotIndex{\si@requirecfgs,\space,\spacefactor,\tablename,\textsc}
+%\DoNotIndex{\textsuperscript,\the,\unitsep,\unitsuperscript,\usk}
+%\DoNotIndex{\value,\vspace,\xspace,\z@}
+%
+% \title{\currpkg\ --- Writing chemistry with style^^A
 %   \thanks{This file describes version \fileversion, last revised
 %           \filedate.}}
-% \author{Joseph Wright%
+% \author{Joseph Wright^^A
 %   \thanks{E-mail: joseph.wright@morningstar2.co.uk}}
 % \date{Released \filedate}
 %
 % \maketitle
 %
 %\begin{abstract}
-% The |chemstyle| package provides a ``one-stop shop'' for setting up
-% formatting of LaTeX documents following the editorial policies of
+% The \currpkg package provides a ``one-stop shop'' for setting up
+% formatting of \LaTeX\ documents following the editorial policies of
 % various chemical journals.  It provides a number of handy
 % chemistry-related commands, and loads several support packages to
 % aid the chemist.
@@ -208,36 +236,36 @@
 %\end{multicols}
 %
 %\section{Introduction}
-% The aim of |chemstyle| is to provide a quick method to set up
-% various document parameters (such as caption formatting), simply by
+% The aim of \currpkg is to provide a quick method to set up various
+% document parameters (such as caption formatting), simply by
 % specifying the model journal.  The package has also been designed
 % to allow rapid addition of new journal styles.  Each style
 % definition is a separate file, and new styles can be added very
-% readily. |chemstyle| has grown out of the |rsc| package, which had
+% readily. \currpkg has grown out of the \pkg{rsc} package, which had
 % a similar aim but was much more limited (and less robustly
-% implemented).  The |chemstyle| package is also designed with the
-% use of |biblatex| in mind: the |rsc| package is closely bound to
-% traditional BibTeX use.
+% implemented).  The \currpkg package is also designed with the use
+% of \pkg{biblatex} in mind: the \pkg{rsc} package is closely bound
+% to traditional \BibTeX\ use.
 %
-% As a successor to the |rsc| package, |chemstyle| provides a range
+% As a successor to the \pkg{rsc} package, \currpkg provides a range
 % of chemistry-related additional macros.  The set provided here is
-% an extended version of those provide by |rsc|.  Everything that can
-% be done using the |rsc| LaTeX package is therefore possible using
-% the |chemstyle| package.
-%
-% The formatting system provided by |chemstyle| are intended for
-% writing a variety of documents.  Thus the stylistic changes made by
-% the package do not seek to reproduce the appearance of printed
-% journal articles.  The package aims to be suitable for use in
-% preparing drafts of papers, but also for writing reports, theses
-% and so on.
-%
-%\section{Style options for \texttt{chemstyle}}
-% |chemstyle| should be loaded with a package option specifying which
-% journal style to follow.  Currently, |chemstyle| is aware of a the
+% an extended version of those provide by \pkg{rsc}.  Everything that
+% can be done using the \pkg{rsc} \LaTeX\ package is therefore
+% possible using the \currpkg package.
+%
+% The formatting system provided by \currpkg are intended for writing
+% a variety of documents.  Thus the stylistic changes made by the
+% package do not seek to reproduce the appearance of printed journal
+% articles.  The package aims to be suitable for use in preparing
+% drafts of papers, but also for writing reports, theses and so on.
+%
+%\section{Style options for \currpkg}
+%\DescribeOption{journal}
+% \currpkg should be loaded with a package option specifying which
+% journal style to follow.  Currently, \currpkg is aware of a the
 % styles listed in Table~\ref{styles}.  New styles can be developed
 % by creating a new file modelled on the existing definitions;
-% |chemstyle| will automatically search for correctly-named styles.
+% \currpkg will automatically search for correctly-named styles.
 %\begin{table}
 %  \begin{tabular}{ll}
 %    \toprule
@@ -256,112 +284,131 @@
 %    tetlett & \emph{Tetrahedron}, \emph{Tetrahedron Lett.} \\
 %    \bottomrule
 %  \end{tabular}
-%  \caption{Styles provided by \texttt{chemstyle}}\label{styles}
+%  \caption{Styles provided by \currpkg}\label{styles}
 %\end{table}
-% The style files provided with |chemstyle| have been derived from
+% The style files provided with \currpkg have been derived from
 % current practice in the target journals.  It is not always easy to
 % pick the correct stylistic settings from (sometimes inconsistent)
 % real-world examples.  The package author welcomes feedback on the
 % styles provided.
 %
-% The |none| style is notable as it is not based on a journal.
+% The \opt{none} style is notable as it is not based on a journal.
 % Instead this is a minimal style, which provides the additional
 % commands without making formatting changes.  It is also the default
 % style if no option is given.  This document has been compiled
-% implicity using the |none| option, for example.
+% implicity using the \opt{none} option, for example.
 %
 %\subsection{Creating styles}
-% The process of creating a new styles for |chemstyle| is intended to
-% be relatively easy.  New styles should be saved as files with the
-% extension |.jdf| (standing for for Journal Definition File), and
+% The process of creating a new styles for \currpkg is intended to be
+% relatively easy.  New styles should be saved as files with the
+% extension \ext{jdf} (standing for for Journal Definition File), and
 % should be saved somewhere in the path searched by
-% TeX.\footnote{Depending on your TeX distribution, you may need to
-% rebuild your file database after creating a new style.  For MikTeX
-% users, this can be done graphically or by typing \texttt{mpm
-% --update-db} at the command line; for TeXLive, run
+% \TeX.\footnote{Depending on your \TeX\ distribution, you may need
+% to rebuild your file database after creating a new style.  For
+% Mik\TeX\ users, this can be done graphically or by typing
+% \texttt{mpm --update-db} at the command line; for TeXLive, run
 % \texttt{texhash}.}  The definition files included in the package
 % should provide a guide to the basic options available for producing
-% new styles.  Arbitrary TeX commands can be included, if they are
+% new styles.  Arbitrary \TeX\ commands can be included, if they are
 % necessary for a particular style.  For example, other packages can
-% be loaded in \cmd{\usepackage}.
+% be loaded in \cs{usepackage}.
 %
-% The maintainer of |chemstyle| is happy to add new styles to the
+% The maintainer of \currpkg is happy to add new styles to the
 % package, either by contribution by users or on request (when he has
-% sufficient time!).  If you have a new style to add (or corrections to
-% an existing one), please contact the package author.
+% sufficient time!).  If you have a new style to add (or corrections
+% to an existing one), please contact the package author.
 %
 %\subsection{Package options}
-% As well as the various journal styles provided with the package, a
-% number of options are recognised to alter compatibility with other
-% packages and to give the desired output. |chemstyle| will also pass
-% options through to the |chemscheme| package, which is used to
-% provide support for schemes.  Users should consult the |chemscheme|
-% documentation for the options applicable.
-%
-% Currently, |chemstyle| has options |nonotes|, |nophrases|,
-% |SIunits| and |xspace|.  These are explained at the appropriate
-% places within this document.  All are hopefully relatively clearly
-% named.
+%\DescribeOption{journal}
+% As of version 1.2, \currpkg uses the \pkg{keyval} system for
+% option management.  The choice of journal style can therefore be
+% given as a normal option or by using the key \opt{journal=}.  The
+% other package options provided by the package are described as they
+% arise in the documentation. 
+%
+%\DescribeMacro{\cstsetup}
+% Some of the package options can only be set when loading the
+% package. The choice of journal style is one of these.  Others can
+% be altered anywhere in the document, using the \cs{cstsetup} macro.
+%  This accepts a \pkg{keyval} list and processes it as needed.
+%  
+%\DescribeOption{chemcompounds}
+% \currpkg loads the \pkg{chemscheme} package, and therefore will
+% pass through the opt{chemcompounds} option.
 %
 %\section{Naming of the references section}
-% |chemstyle| alters the naming of the references section of a
-% document. By default, |chemstyle| alters the value of
-% \cmd{\bibname} or \cmd{\refname} (as appropriate) to the form of
-% words chosen by the target journal for the ``\refname'' section.
+% \currpkg alters the naming of the references section of a document.
+% By default, \currpkg alters the value of \cs{bibname} or
+% \cs{refname} (as appropriate) to the form of words chosen by the
+% target journal for the ``References'' section.
 %
 % The ``\refname'' naming commands are language-aware, \emph{via} the
-% |babel| interface.  Currently, |chemstyle| includes appropriate
-% labels for babel languages |english|, |UKenglish|, |ngerman| and
-% |french|.\footnote{The \texttt{french} option for \texttt{babel}
-% causes a clash with \texttt{unitsdef} concerning the command
-% \texttt{\textbackslash fg}.  \texttt{babel} uses this for
-% \emph{guillemets}, while \texttt{unitsdef} uses it as an
-% abbreviation for \texttt{\textbackslash femtogram}.  The
-% \texttt{chemstyle} package prevents the clash, and leaves the
-% \texttt{babel} definition intact.} Other languages can be added if
-% appropriate wordings are provided to the author.
-%
-% The |chemstyle| packages recognises the |nonotes| option, which
-% affects how the \refname section is headed.   With the |nonotes|
-% option, the ``Notes'' part of the section name is omitted, and only
-% the ``\refname'' phrase is output.
+% \pkg{babel} interface.  Currently, \currpkg includes appropriate
+% labels for \pkg{babel} languages \opt{english}, \opt{UKenglish},
+% \opt{ngerman} and \opt{french}. Other languages can be added if
+% appropriate wordings are provided to the author.  The naming system
+% is designed to work correctly with both \pkg{natbib} and
+% \pkg{biblatex}.
+%
+%\DescribeOption{notes}
+%\DescribeOption{nonotes}
+% The package recognises the \opt{notes} option for controlling how
+% the references section is named.  The accepts the values
+% \opt{true}, \opt{false} and \opt{auto}.  The Boolean values either
+% enable or disable the addition of ``Notes and'' to the
+% ``References'' of the section title.  The \opt{auto} option works
+% in conjunction with the \pkg{notes2bib} package.  If notes are
+% added, ``Notes and'' is included in the section title, whereas if
+% no notes are given the section title remains as ``References''.
+% The \opt{nonotes} option is equivalent to \opt{notes=false}.
+%
+%\DescribeOption{notesbefore}
+% The second option for this area is \opt{notesbefore}.  This takes
+% \opt{true} and \opt{false} only, and sets whether ``Notes and
+% References'' or ``References and Notes'' is produced.
 %
 %\section{Additional macros}
-%
 %\subsection{Additional units}
-% Both the |unitsdef| and |SIunits| packages provide a great number
-% of easy to use unit commands, and handles spacing between numbers
-% and units very well. However, a few useful units seem to be
-% missing, and are provided here. By default, |chemstyle| uses the
-% |unitsdef| package to achieve this, but using the |SIunits| option
-% will use that package instead.
 %\DescribeMacro{\Hz}
 %\DescribeMacro{\mmHg}
 %\DescribeMacro{\molar}
 %\DescribeMacro{\Molar}
 %\DescribeMacro{\cmc}
-% The most obvious of these is \cmd{\Hz}, which simply gives \Hz. The
-% command \cmd{\mmHg} has a non-breaking thin space, leading to
-% \mmHg. Two related commands are given for concentration:
-% \cmd{\molar} gives \molar, whilst \cmd{\Molar} gives \Molar.
-% Finally, the command \cmd{\cmc} is provided for generating \cmc.
-% When using |unitsdef|, all of the new macros space correctly with
-% numbers, so inputting |10\cmc| gives 10\cmc, with a non-breaking
-% space.  Users of |SIunits| will be familiar with the approach used
-% by that package.
+% Both the \pkg{SIunits} and \pkg{unitsdef} packages provide methods
+% for handling a range of units, but do not include a small number of
+% unit macros useful to chemists.  The package therefore provides
+% these, using \pkg{SIunits} by default.\footnote{This is a change in
+% v1.2: previous versions used \pkg{unitsdef}.}  The definitions
+% follow the pattern of the appropriate package.
+%\begin{LaTeXexample}
+%  \unit{10}{\Hz}\\
+%  \unit{20}{\mmHg}\\
+%  \unit{30}{\molar}\\
+%  \unit{40}{\Molar}\\
+%  \unit{50}{\cmc}
+%\end{LaTeXexample}
+%
+% The \pkg{si} package is currently under development as a
+% replacement for \pkg{SIunits} and \pkg{unitsdef}.\footnote{By the
+% maintainer of \currpkg.}  \pkg{si} includes definitions for the
+% above units, and so if it is loaded the definitions are taken from
+% there, rather than provided by \currpkg.  Looking to the future,
+% once \pkg{si} reaches version 1.0, it will become the default
+% support package for \currpkg.
 %
 %\subsection{The standard state symbol}
 %\DescribeMacro{\standardstate}
 % Related to the above, but not exactly a unit is the
-% \cmd{\standardstate} command.\footnote{The \texttt{\textbackslash
-% standardstate} macro is only defined if the user does not have
-% their own version.}  This generates the tricky \standardstate\
-% symbol: |$\Delta S\standardstate$| generates $\Delta
-% S\standardstate$.  Note that this is safe in either text or maths
-% mode.
+% \cmd{\standardstate} command.\footnote{The \cs{standardstate} macro
+% is only defined if the user does not have their own version.}  This
+% generates the tricky \cs{standardstate} symbol.
+%\begin{LaTeXexample}
+%  \emph{H}\standardstate\\
+%  $\Delta S\standardstate$
+%\end{LaTeXexample} 
 %
 %\subsection{Alkyl radicals}
-%\DescribeMacro{\iPr}
+%\DescribeMacro{\nPr}
 %\DescribeMacro{\iPr}
 %\DescribeMacro{\nBu}
 %\DescribeMacro{\iBu}
@@ -369,16 +416,37 @@
 %\DescribeMacro{\tBu}
 % There are a few alkyl radicals that come up all of the time.  No
 % one seems to have put these into a package, so they are provided
-% here. As you would expect, \cmd{\iPr} gives \iPr, \cmd{\iBu} gives
-% \iBu\ and \cmd{\tBu} gives \tBu, and so on.  The style of the
-% output depends on the journal style specified; most journals seem
-% to favour one version of the abbreviation.  When |chemstyle| is
-% loaded using the |xspace| option, the |xspace| package is
-% automatically used to add space after the command names, so that
-% |\iPr group| will result in ``\iPr\ group'' being
-% typeset.\footnote{Reader of the source of this document will see
-% that this document has been compiled \emph{without} the |xspace|
-% option!}
+% here. As you would expect, \cs{iPr} gives \iPr, \cs{iBu} gives \iBu
+% and \cs{tBu} gives \tBu, and so on.  The style of the output
+% depends on the journal style specified; most journals seem to
+% favour one version of the abbreviation.
+%\begin{LaTeXexample}
+%  The alkyl group could be \nPr, \iPr\\
+%  or \nBu without affecting the selectivity.
+%\end{LaTeXexample}
+% 
+%\DescribeOption{xspace}
+% When \currpkg is loaded using the \opt{xspace} option, the
+% \pkg{xspace} package is automatically used to add space after the
+% command names, so that |\iPr group| will result in ``\iPr\ group''
+% being typeset.
+%
+%\DescribeOption{radhyphen}
+%\DescribeOption{rademph}
+%\DescribeOption{radsuper}
+%\DescribeOption{radprefix}
+% The appearance of these radical abbreviations is controlled by the
+% package options \opt{radhyphen}, \opt{rademph}, \opt{radsuper} and
+% \opt{radprefix}.  The journal styles set these automatically, but
+% they can be redefined at any point.  The options work as might be
+% expected, and are Boolean switches.
+%\begin{LaTeXexample}
+%  \cstsetup{radhyphen=false,radsuper=true}\\
+%  \iPr \tBu
+%  \cstsetup{radhyphen=true,radsuper=false,%
+%    radprefix=false,rademph=false}\\
+%  \iBu \sBu
+%\end{LaTeXexample}
 %
 %\subsection{Latin phrases}
 %\DescribeMacro{\latin}
@@ -389,385 +457,427 @@
 %\DescribeMacro{\invacuo}
 % The various Latin phrases commonly used in chemistry are made
 % available as the obvious commands.  By altering the definition of
-% \cmd{\latin}, this allows ready switching from italic to Roman
-% typesetting.  Notice that \cmd{\etc}, \cmd{\ie} and \cmd{\eg} are
-% aware of trailing periods, and so doubling-up should not occur.
-% Once again, these macros use |xspace| when given as a package
-% option to handle automatic addition of spaces after these phrases.
-%  For American journals, where it is obligatory to follow ``\eg''
-% and ``\ie'' with a comma, the package provides a mechanism for
-% handling this automatically.  Thus, when using an appropriate
-% journal style, |\eg|, |\eg.| and |\eg,| will all result in
-% typesetting ``\eg,''.
-%
-% The \cmd{\etc} and \cmd{\etal} commands are set up on the
+% \cs{latin}, this allows ready switching from italic to Roman
+% typesetting.  Notice that \cs{etc}, \cs{ie} and \cs{eg} are aware
+% of trailing periods, and so doubling-up should not occur. Once
+% again, these macros use \pkg{xspace} when given as a package option
+% to handle automatic addition of spaces after these phrases.
+%
+%\DescribeOption{abbremph} 
+% The use of italic for these abbreviations is set by altering the
+% package option \opt{abbremph}, which takes values \opt{true} and
+% \opt{false}.
+%\begin{LaTeXexample}
+%  \etal or \invacuo plus \latin{some text}\\
+%  \cstsetup{abbremph=false}
+%  \ie equals \eg perhaps \etc
+%\end{LaTeXexample}
+%
+%\DescribeOption{abbrcomma}
+% For American journals, where it is obligatory to follow ``\eg'' and
+% ``\ie'' with a comma, the package provides a mechanism for handling
+% this automatically.  Thus, when using an appropriate journal style,
+% |\eg|, |\eg.| and |\eg,| will all result in typesetting ``\eg,''.
+% The Boolean package option \opt{abbrcomma} controls this.
+%\begin{LaTeXexample}
+%  \eg this\\
+%  \cstsetup{abbrcomma=true}
+%  \ie that
+%\end{LaTeXexample}
+%
+% The \cs{etc} and \cs{etal} commands are set up on the
 % assumption that they come at the end of a sentence.  Hence the
 % spacing after these will default to an inter-sentence space.  If
 % you desire an inter-word space, use the normal methods
-% |\etc\ more text|, |\etc~more text|, \etc.  If this is a big issue,
-% the package author may look at it again.
+%\begin{LaTeXexample}
+%  \etc\ more text \\
+%  \etal\~have shown
+%\end{LaTeXexample}
 %
+%\DescribeOption{nophrases}
 % The definitions of all of the phrases are designed not to overwrite
 % any given by the user \emph{in the preamble}.  So, if you have your
-% own \cmd{\latin} macro, it will be used even if you load
-% |chemstyle|. If you encounter any problems, try loading the package
-% with the |nophrases| option; this option prevents the package even
+% own \cs{latin} macro, it will be used even if you load \currpkg. If
+% you encounter any problems, try loading the package with the
+% \opt{nophrases} option; this option prevents the package even
 % trying to define any of the phrase macros.
 %
 %\DescribeMacro{\latinemphon}
 %\DescribeMacro{\latinemphoff}
-% The formatting of Latin phrases can be altered using the two macros
-% \cmd{\latinemphon} and \cmd{\latinemphoff}, which switch the use of
-% \cmd{\emph} for Latin phrases on and off.  These macros are mainly
-% intended for the use in journal style files, but may be more
-% generally useful.
+% For backward-compatibiltiy with previous versions of \currpkg, the
+% macros \cs{latinemphon} and \cs{latinemphoff} are provided.  These
+% work as would be expected, to alter the formatting produced by
+% \cs{latin}.  The more general \pkg{keyval} method is now preferred
+% for making this change.
 %
 %\section{Additional information}
-%\subsection{Advice for users of \texttt{rsc} and \texttt{achemso}}
-% The |chemstyle| package is intended as a replacement for the |rsc|
-% package.  As such, it covers almost everything the the |rsc| LaTeX
-% package does, and more.  Users of |rsc| are strongly encouraged to
-% update to using |chemstyle|.  The bibliography styles provided by
-% |achemso| and |rsc| will continue to be required, of course.
-% Migration of these styles to |biblatex| is an on-going project.
+%\subsection{Advice for users of the \pkg{rsc} package}
+% The \currpkg package is intended as a replacement for the \pkg{rsc}
+% package.  As such, it covers almost everything the the \pkg{rsc}
+% \LaTeX\ package does, and more.  Users of \pkg{rsc} are strongly
+% encouraged to update to using \currpkg.  The bibliography styles
+% provided by \pkg{rsc} will continue to be required, of course.
+% Migration of these styles to \pkg{biblatex} is an on-going project.
 %
 %\subsection{Interactions with other packages}
-% The |chemstyle| package has been designed to avoid, as far as
+% The \currpkg package has been designed to avoid, as far as
 % possible, clashes with other packages.  The package requires the
-% presence of the standard |graphicx| and |varioref| packages. If
-% these packages need to be loaded with explicit options, this should
-% be done \emph{before} loading |chemstyle|. The |chemscheme| package
-% is also needed, as it provides the floating |scheme| environment
-% essential in synthetic chemistry documents.
+% presence of the standard \pkg{graphicx} and \pkg{varioref}
+% packages. If these packages need to be loaded with explicit
+% options, this should be done \emph{before} loading \currpkg. The
+% \pkg{chemscheme} package is also needed, as it provides the
+% floating \texttt{scheme} environment essential in synthetic
+% chemistry documents.
 %
 %\subsection{Captions above floats}
-% The |scheme| float type is generated using the |float| package.
-% This has the side-effect that the placement of captions for floats
-% does not depended on where the \cmd{\caption} command comes inside
-% the floating environment.\footnote{Normally this is a good thing.}
-% If you wish to alter the placement of captions, the mechanism of
-% the underlying |float| package will be needed.  This requires the
-% use of \cmd{\floatstyle} to load the desired settings, followed by
-% \cmd{\restylefloat} to apply the settings.  This is most usually
-% done with tables.
+% The \texttt{scheme} float type is generated using the \pkg{float}
+% package. This has the side-effect that the placement of captions
+% for floats does not depended on where the \cs{caption} command
+% comes inside the floating environment.\footnote{Normally this is a
+% good thing.} If you wish to alter the placement of captions, the
+% mechanism of the underlying \pkg{float} package will be needed.
+% This requires the use of \cs{floatstyle} to load the desired
+% settings, followed by \cs{restylefloat} to apply the settings.
+% This is most usually done with tables.
 %\begin{LaTeXexample}[\typesetfloatexample]
-% \begin{table}[h]
-% \caption{A caption above the float contents}
-% The float contents
-% \end{table}
-% \floatstyle{plaintop}
-% \restylefloat{table}
-% \begin{table}[h]
-% \caption{A second caption above the float contents}
-% The second float contents
-% \end{table}
+%  \begin{table}[h]
+%    \caption{A caption above the float contents}
+%    The float contents
+%  \end{table}
+%  \floatstyle{plaintop}
+%  \restylefloat{table}
+%  \begin{table}[h]
+%    \caption{A second caption above the float contents}
+%    The second float contents
+%  \end{table}
 %\end{LaTeXexample}
 %
-% \iffalse
-%<*template>
-% \fi
-% \section{A template for chemical articles}
+%\section{A template for chemical articles} 
 % This is a very simple template for chemistry-related documents.
 % Hopefully it contains a few extra hints for getting well-formatted
 % documents quickly.  For simplicity, the template assumes that the
 % user is writing a thesis for a U.K.~university.  Hence it uses
-% U.K.~defaults and RSC-based styling.
+% U.K.~defaults and RSC-based styling. Most of the packages used have
+% good documentation, but a brief summary of why they are recommend
+% follows.  The file \file{chemstyle.ltx} will be generated by
+% compiling this documentation, and contains the example ``ready to
+% run''.
+%\edef\LaTeXexamplefile{chemstyle.ltx}
+%\begin{LaTeXexample}[\typesetcodeonly]
+%  \documentclass[fontsize=10pt,paper=a4]{scrreprt}
+%  \usepackage[english,UKenglish]{babel}
+%  \usepackage{geometry,upgreek,booktabs}
+%  \usepackage[journal=rsc,xspace=true]{chemstyle}
+%  \usepackage[version=3]{mhchem}
+%  \usepackage[footnotes]{notes2bib}
+%  \usepackage[final]{microtype}
+%  \usepackage[colorlinks]{hyperref}
+%  \begin{document}
+%    Document contents go here
+%  \end{document}
+%\end{LaTeXexample}
+%\edef\LaTeXexamplefile{\jobname.tmp}
 %
-% The versatile \textsc{koma-script} bundle provides more advanced
+% The versatile \textsc{koma}-script bundle provides more advanced
 % versions of the standard document classes.  If you want paragraphs
 % separated out, with no indents (a common style for theses), add the
-% |parskip| option to the font and paper size ones given here.
-%    \begin{macrocode}
-\documentclass[fontsize=10pt,paper=a4]{scrreprt}
-%    \end{macrocode}
-% The |geometry| package allows the users to alter page layout
-% with ease; much better than trying to hack the raw LaTeX system.
-%    \begin{macrocode}
-\usepackage{geometry}
-%    \end{macrocode}
-% The |babel| system is loaded to sort out hyphenation and so on,
+% \opt{parskip} option to the font and paper size ones given here.
+%
+% The \pkg{babel} system is loaded to sort out hyphenation and so on,
 % and could be useful if there are any foreign-language quotes.
-%    \begin{macrocode}
-\usepackage[english,UKenglish]{babel}
-%    \end{macrocode}
-% Load |chemstyle| (of course) to give not only some easy formatting,
+%
+% \pkg{geometry}e allows the users to alter page layout with ease:
+% much better than trying to hack the raw \LaTeX\ system.
+% \pkg{booktabs} gives much nicer looking tables than the \LaTeXe\
+% default. \pkg{upgreek} provides non-italic lowercase Greek letters,
+% which should be used for things such as bond descriptions.
+%\begin{LaTeXexample}
+%  $\uppi$-bond $\upsigma^*$-orbital
+%\end{LaTeXexample}
+%
+% Load \currpkg (of course) to give not only some easy formatting,
 % but also to automatically provide a float type for schemes, thanks
-% to the |chemscheme| package.  This also loads either
-% |chemcompounds| or (optionally) |bpchem| to track compound numbers.
-% Using the |xspace| option automatically adds space after the
-% various abbreviations.
-%    \begin{macrocode}
-\usepackage[rsc,xspace]{chemstyle}
-%    \end{macrocode}
-% The |mhchem| package provides the \cmd{\ce} command for rapidly
+% to the \pkg{chemscheme} package.  This also loads either
+% \pkg{chemcompounds} or (optionally) \pkg{bpchem} to track compound
+% numbers.
+%
+% The \pkg{mhchem} package provides the \cs{ce} command for rapidly
 % typesetting formulas, so that you can type |\ce{H2SO4}| and get
 % \ce{H2SO4}.
-%    \begin{macrocode}
-\usepackage[version=3]{mhchem}
-%    \end{macrocode}
-% Greek letters should be italic if used for variables, but upright
-% (Roman) if used otherwise.  So the standard LaTeX |$\delta$| is
-% fine for typesetting an NMR shift (\eg\ $\delta = \dots$ ppm.),
-% but not for a $\upsigma$-bond or a $\uppi$-complex.  The |upgreek|
-% package provides commands such as |$\upsigma$| and |$\uppi$| which
-% are ideal for this.
-%    \begin{macrocode}
-\usepackage{upgreek}
-%    \end{macrocode}
-% The default LaTeX table formatting is not very good.  The
-% |booktabs| package does things properly, and has good
-% advice in the manual.  A highly-recommended package for
-% those interested in formatting (\ie\ all (La)TeX users!).
-%    \begin{macrocode}
-\usepackage{booktabs}
-%    \end{macrocode}
-% The |microtype| package improves formatting when used with the
-% pdfTeX engine.  By giving the |final| option, it is active even
-% when using |draft| as a global option.
-%    \begin{macrocode}
-\usepackage[final]{microtype}
-%    \end{macrocode}
-% Using |notes2bib| allows the user to automatically add notes to the
-% bibliography from within the document body.  So you can put
+%
+% The \pkg{microtype} package improves formatting when used with the
+% pdf\TeX\ engine.  By giving the \opt{final} option, it is active
+% even when using \opt{draft} as a global option.
+%
+% Using \pkg{notes2bib} allows the user to automatically add notes to
+% the bibliography from within the document body.  So you can put
 % |\bibnote{A note}| in the source, and this will move into the
-% References section without any further effort.  The |footnotes|
+% References section without any further effort.  The \opt{footnotes}
 % option means that footnotes do the same.
-%    \begin{macrocode}
-\usepackage[footnotes]{notes2bib}
-%    \end{macrocode}
-% Finally, the |hyperref| package makes headings, citations and so on into
-% hyperlinks.
-%    \begin{macrocode}
-\usepackage[colorlinks]{hyperref}
-%    \end{macrocode}
-% The bulk of the document can then start.
-%    \begin{macrocode}
-\begin{document}
-\end{document}
-%    \end{macrocode}
-% \iffalse
-%</template>
-% \fi
 %
-% \StopEventually{}
+% Finally, the \pkg{hyperref} package makes headings, citations and
+% so on into hyperlinks.
 %
-% \iffalse
+%\StopEventually{}
+%
+%\iffalse
 %<*package>
-% \fi
+%\fi
 %\section{The package code}
-%
 %\subsection{Setup code}
 % First of all, the package identifies itself and loads other
-% packages needed to function.  Loading |chemscheme| is deferred
+% packages needed to function.  Loading \pkg{chemscheme} is deferred
 % until later, to allow processing of options at the correct point.
 %    \begin{macrocode}
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{chemstyle}
-  [2007/10/31 v1.1h Writing chemistry with style]
+  [2008/03/08 v1.2 Writing chemistry with style]
 %    \end{macrocode}
 %\changes{v1.1d}{2007/10/04}{Require caption in all cases}
 %\changes{v1.0a}{2007/08/23}{No longer load \texttt{fixltx2e}
 %  package}
+%\changes{v1.2}{2008/03/05}{Added \pkg{xkeyval} interface}
 % Packages that are needed under all circumstances are loaded here.
+% There are some limitations on the age of \pkg{xkeyval}.
 %    \begin{macrocode}
-\RequirePackage{graphicx,varioref,caption}
+\RequirePackage{xkeyval}
+\@ifpackagelater{xkeyval}{2005/05/07}
+  {}
+  {\PackageError{chemstyle}
+     {xkeyval >= 2.5 required}
+     {chemstyle requires the `xkeyval' package, version 2.5
+       or later.\MessageBreak The version loaded is:
+       `\@nameuse{ver@xkeyval.sty}'.\MessageBreak
+        This is a fatal error: loading will abort.}
+   \endinput}
+\RequirePackage{graphicx,varioref,caption,xspace}
 %    \end{macrocode}
-%
-%\subsection{Alkyl radicals}
-%\begin{macro}{\cst@emph}
-%\begin{macro}{\cst@hyph}
-%\begin{macro}{\cst@super}
-% Alkyl radical abbreviations are produced using the macro
-% \cmd{\cst@radical}.  This uses a series of formatting commands,
-% which have default values provided here.  The names are hopefully
-% pretty self-explanatory.
+%\begin{macro}{\cst@tempa}
+%\changes{v1.2}{2008/03/05}{New macro}
+%\begin{macro}{\cst@tempb}
+%\changes{v1.2}{2008/03/05}{New macro}
+% A couple of temporary private macros.
 %    \begin{macrocode}
-\let\cst@emph\relax
-\def\cst@hyph{}
-\let\cst@super\relax
-\newif  \ifcst@prefix   \cst@prefixtrue
+\newcommand*{\cst@tempa}{}
+\newcommand*{\cst@tempb}{}
 %    \end{macrocode}
 %\end{macro}
 %\end{macro}
-%\end{macro}
-%\begin{macro}{\cst@radical}
-% The \cmd{\cst@radical} macro does the hard work of declaring
-% each abbreviation.  To ensure there is no unexpected clash of
-% names, \cmd{\newcommand} is used first to check for any problems.
-% The commands are made robust so they can (hopefully) be used
-% anywhere.
+%
+%\subsection{Option handling}
+%\begin{macro}{\cst@boolkey}
+% Option handling is processed using \pkg{xkeyval}.  As a number of
+% Boolean keys are needed, a shortcut is handy.
 %    \begin{macrocode}
-\def\cst@radical#1#2{%
-  \expandafter\newcommand\expandafter{\csname #1#2\endcsname}{}%
-  \expandafter\DeclareRobustCommand\expandafter{%
-    \csname #1#2\endcsname}{%
-    \ifcst@prefix
-      \cst@super{\cst@emph{#1}}\cst@hyph#2%
-    \else
-      #2\cst@hyph\cst@super{\cst@emph{#1}}%
-    \fi%
-    \cst@xspace
-  }
-}
+\newcommand*{\cst@boolkey}[1]{
+  \define@boolkey[cst]{opt}[cst@]{#1}[true]{}}
 %    \end{macrocode}
 %\end{macro}
-% With a mechanism in place, the abbreviations are declared.  The
-% format of the resulting output will depend upon the configuration
-% file used.
+%\begin{macro}{\ifcst@chemcompounds}
+%\begin{macro}{\ifcst@xspace}
+%\begin{macro}{\ifcst@phrases}
+%\begin{macro}{\ifcst@radprefix}
+%\begin{macro}{\ifcst@rademph}
+%\begin{macro}{\ifcst@radsuper}
+%\begin{macro}{\ifcst@radhyphen}
+%\begin{macro}{\ifcst@abbremph}
+%\begin{macro}{\ifcst@abbrcomma}
+%\begin{macro}{\ifcst@notesbefore}
+% The Boolean keys are now defined.
 %    \begin{macrocode}
-\cst@radical{n}{Pr}%
-\cst@radical{i}{Pr}%
-\cst@radical{n}{Bu}%
-\cst@radical{i}{Bu}%
-\cst@radical{s}{Bu}%
-\cst@radical{t}{Bu}%
+\cst@boolkey{chemcompounds}
+\cst@boolkey{xspace}
+\cst@boolkey{phrases}
+\cst@boolkey{radprefix}
+\cst@boolkey{rademph}
+\cst@boolkey{radsuper}
+\cst@boolkey{radhyphen}
+\cst@boolkey{abbremph}
+\cst@boolkey{abbrcomma}
+\cst@boolkey{notesbefore}
 %    \end{macrocode}
-%
-% \subsection{Option handling}
-% Firstly, the ``pass through'' options are handled, as these will be
-% sent through to |chemscheme|.  The package options for |chemstyle|
-% are also handled here.
-%\changes{v1.1}{2007/09/17}{Added \texttt{phrases} option}
-%\changes{v1.1}{2007/09/17}{Added \texttt{siunits} option}
-%\changes{v1.1}{2007/09/17}{Added \texttt{xspace} option}
-%\changes{v1.1c}{2007/09/23}{Added \texttt{SIunits} option}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\ifcst@notes}
+%\begin{macro}{\ifcst@autonotes}
+%\begin{macro}{\cst@tempa}
+%\begin{macro}{\cst@tempb}
+% For notes, some choices are available.  These need a bit of
+% testing.
 %    \begin{macrocode}
-\newif  \ifcst@notes    \cst@notestrue
-\newif  \ifcst@phrases  \cst@phrasestrue
-\newif  \ifcst@si       \cst@sifalse
-\newif  \ifcst@xspace   \cst@xspacefalse
-\DeclareOption{ch}{\ExecuteOptions{chapter}}
-\DeclareOption{chapter}%
-  {\PassOptionsToPackage{chapter}{chemscheme}}
-\DeclareOption{chemcompounds}%
-  {\PassOptionsToPackage{chemcompounds}{chemscheme}}
-\DeclareOption{nonotes}{\cst@notesfalse}
-\DeclareOption{nophrases}{\cst@phrasesfalse}
-\DeclareOption{siunits}{\cst@sitrue}
-\DeclareOption{SIunits}{\cst@sitrue}
-\DeclareOption{xspace}{\cst@xspacetrue}
+\newif\ifcst@notes
+\newif\ifcst@autonotes
+\define@choicekey*[cst]{opt}{notes}[\cst@tempa]
+  {true,false,auto}[true]
+  {\cst@notesfalse
+   \cst@autonotesfalse
+   \edef\cst@tempb{auto}
+   \ifx\cst@tempa\cst@tempb
+     \cst@notestrue
+     \cst@autonotestrue
+   \fi
+   \edef\cst@tempb{true}
+   \ifx\cst@tempa\cst@tempb
+     \cst@notestrue
+   \fi}
 %    \end{macrocode}
-% In order to handle the loading of style definitions correctly, a
-% bit of care is needed.  The package options need to be loaded
-% \emph{before} |chemscheme|, but the style definitions need to
-% be loaded after |chemscheme|.  This is achieved by saving the
-% options and looking at them again once the package loading is done.
-% Notice that only one style definition can be used, so this is
-% taken care of with a warning if needed.
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+% Some old options are no longer needed at all.
 %    \begin{macrocode}
-\let\cst@option\relax
-\DeclareOption*{%
-  \ifx\cst@option\relax\else
-    \PackageWarning{chemstyle}
-      {Extra option \cst@option\space ignored}
-  \fi
-  \edef\cst@option{\CurrentOption}
-}
+\DeclareOptionX[cst]<opt>{siunits}
+  {\PackageInfo{chemstyle}{Option siunits no longer required}}
+\DeclareOptionX[cst]<opt>{SIunits}
+  {\PackageInfo{chemstyle}{Option siunits no longer required}}
+\DeclareOptionX[cst]<opt>{nonotes}
+  {\ExecuteOptionsX[cst]<opt>{notes=false}}
+\DeclareOptionX[cst]<opt>{nophrases}
+  {\ExecuteOptionsX[cst]<opt>{phrases=false}}
 %    \end{macrocode}
-% If |SIunits| is already loaded, then the option has to be set.
+%\begin{macro}{\cst@journal}
+%\begin{macro}{\cst@language}
+% The \opt{journal} option can be given with or without
+% \opt{journal=}.
 %    \begin{macrocode}
-\@ifpackageloaded{SIunits}
-  {\ExecuteOptions{siunits}}
-  {\@ifpackageloaded{siunits}
-    {\ExecuteOptions{siunits}}
-    {}}
-\ProcessOptions*
-\ifcst@si
-  \@ifpackageloaded{unitsdef}
-    {\PackageWarning{chemstyle}{%
-      You have set the SIunits option,\MessageBreak
-      but have already loaded unitsdef!\MessageBreak
-      unitsdef will be used for extra unit macros}
-    \cst@sifalse}
-    {\AtBeginDocument{%
-      \@ifpackageloaded{siunits}%
-        {}
-        {\RequirePackage{SIunits}}%
-      }
-    }
-\else
+\define@cmdkeys[cst]{opt}[cst@]{journal,language}
+\DeclareOptionX*{\edef\cst@journal{\CurrentOption}}
 %    \end{macrocode}
-% The \cmd{\fg} macro is defined in French as a \emph{guillemet} sign,
-% and so to avoid a clash a bit of patching is needed. A check to see
-% if |babel| has already defined \cmd{\fg}\@. If it has, the definition
-% is saved and deleted.
+%\end{macro}
+%\end{macro}
+% The default options are executed, and the user options are
+% processed.
 %    \begin{macrocode}
-  \ifx\fg\@undefined
-  \else
-    \ifx\fg\relax
-    \else
-      \let\cst@fg\fg
-      \let\fg\@undefined
-    \fi
-  \fi
-  \RequirePackage{unitsdef}
+\setkeys[cst]{opt}{
+  notes=true,
+  phrases=true,
+  chemcompounds=true,
+  xspace=true,
+  journal=none,
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=true,
+  abbremph=true,
+  abbrcomma=false,
+  language=english,
+  notesbefore=true}
+\ProcessOptionsX[cst]<opt>
 %    \end{macrocode}
-% If \cmd{\cst@fg} exists, it is restored here, otherwise \cmd{\fg}
-% is undefined.  At the beginning of the document, \cmd{\fg} is
-% defined as an abbreviation for a femtogram if it is not being used
-% by |babel|.  This way there is not a problem if |babel| is loaded
-% after |chemstyle|.
+% With the options processed, those to be passed to \pkg{chemscheme}
+% are sorted out.
 %    \begin{macrocode}
-  \ifx\cst@fg\@undefined
-    \let\fg\@undefined
-  \else
-    \let\fg\cst@fg
-  \fi
-  \AtBeginDocument{%
-    \ifx\fg\@undefined
-      \newcommand{\fg}{\femtogram}
-    \fi
-  }
+\ifcst@chemcompounds
+  \PassOptionsToPackage{chemcompounds}{chemscheme}
 \fi
 \RequirePackage{chemscheme}
 %    \end{macrocode}
+%\begin{macro}{\cst@disablekey}
+% Some of the options are no longer relevant once the package is
+% loaded.  These are disabled here with a suitable message.
+%    \begin{macrocode}
+\newcommand*{\cst@disablekey}[1]{
+  \define@key[cst]{opt}{#1}{\PackageWarning{chemstyle}
+    {Option `#1' only valid when loading package}}}
+\AtBeginDocument{
+  \cst@disablekey{journal}
+  \cst@disablekey{phrases}
+  \cst@disablekey{nophrases}
+  \cst@disablekey{notes}
+  \cst@disablekey{nonotes}
+  \cst@disablekey{chemcompounds}}
+%    \end{macrocode}
+%\end{macro}
+%\begin{macro}{\cstsetup}
+% A macro for changing the settings at run-time without needing to
+% know the internals of the package.
+%    \begin{macrocode}
+\newcommand*{\cstsetup}[1]{%
+  \iffalse{\fi\ifnum0=`}\fi
+  \setkeys[cst]{opt}{#1}%
+  \ifnum0=`{\fi\iffalse}\fi}
+%    \end{macrocode}
+%\end{macro}
 %
-%\subsection{Extra units and related commands}
-%
-%\begin{macro}{\cubiccentimeter}
+%\subsection{Extra units}
+%\changes{v1.2}{2008/03/06}{Re-write of units section}
+% The upcoming \pkg{si} package\footnote{An improved replacement for
+% all of the existing unit packages.} will include the extra
+% chemistry units as a loadable modules (\opt{alsoload=synchem}).  A
+% series of checks are therefore made before any definitions are
+% given. If \pkg{si} is loaded, the necessary part of that package is
+% loaded; the \cs{si@requirecfgs} macro from that package is used.
+% The \cs{makeatletter} macro is needed here as otherwise the
+% configuration file is loaded with the wrong category codes.
+%    \begin{macrocode}
+\AtBeginDocument{
+  \@ifpackageloaded{si}
+    {\makeatletter
+     \si@requirecfgs{synchem}
+     \makeatother}
+%    \end{macrocode}
 %\begin{macro}{\cmc}
 %\begin{macro}{\Hz}
+% Neither \pkg{unitsdef} nor \pkg{SIunits} define these two macros.
+%    \begin{macrocode}
+    {\newcommand*{\cmc}{\cubiccentimeter}
+     \newcommand*{\Hz}{\hertz}
+%    \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\cubiccentimeter}
 %\begin{macro}{\Molar}
 %\begin{macro}{\molar}
 %\begin{macro}{\mmHg}
 %\begin{macro}{\mol}
-%\changes{v1.0b}{2007/09/04}{New macro}
-% A few additional unit types are provides, which |unitsdef| and
-% |SIunits| do not provide. Most of these require different set up
-% for the two supported packages.
+% A check is for the \pkg{unitsdef} package, so that the
+% package-dependant definitions can be given.
 %    \begin{macrocode}
-\ifcst@si
-  \newcommand{\cubiccentimeter}{\centi\metre\cubed}
-  \newcommand{\Molar}{\textsc{m}}
-  \newcommand{\molar}{\mole\usk\deci\metre\rpcubed}
-  \newcommand{\mmHg}{\milli\metre~Hg}
-  \newcommand{\mol}{\mole}
-\else
-  \newunit{\cubiccentimeter}{\cm\unitsuperscript{3}}
-  \newunit{\Molar}{\textsc{m}}
-  \newunit{\molar}{\mole\unitsep\dm\unitsuperscript{--3}}
-  \newunit{\mmHg}{mm\unitsep{}Hg}
-  \newunit{\mol}{\mole}
-\fi
-\newcommand{\cmc}{\cubiccentimeter}
-\newcommand{\Hz}{\hertz}
+     \@ifpackageloaded{unitsdef}
+       {\newunit{\cubiccentimeter}{\cm\unitsuperscript{3}}
+        \newunit{\Molar}{\textsc{m}}
+        \newunit{\molar}{\mole\unitsep\dm\unitsuperscript{--3}}
+        \newunit{\mmHg}{mmHg}
+        \newunit{\mol}{\mole}}
+%    \end{macrocode}
+% Two checks are made for \pkg{SIunits} to allow for odd
+% capitalisation. If it is not found, then the package is
+% loaded.\footnote{This will change when \pkg{si} reaches version
+% 1.0.}
+%    \begin{macrocode}
+       {\@ifpackageloaded{SIunits}{}
+         {\@ifpackageloaded{siunits}{}
+          {\RequirePackage{SIunits}}}
+        \newcommand*{\cubiccentimeter}{\centi\metre\cubed}
+        \newcommand*{\Molar}{\textsc{m}}
+        \newcommand*{\molar}{\mole\usk\deci\metre\rpcubed}
+        \newcommand*{\mmHg}{\milli\metre Hg}
+        \newcommand*{\mol}{\mole}}}}
 %    \end{macrocode}
 %\end{macro}
 %\end{macro}
 %\end{macro}
 %\end{macro}
 %\end{macro}
-%\end{macro}
-%\end{macro}
+%
+%\subsection{Standard state symbol}
 %\begin{macro}{\cst@varnothing}
 %\changes{v1.1}{2007/09/17}{New macro}
 %\begin{macro}{\standardstate}
-% In a very similar vein, the ``standard state'' symbol is handy.
-% This is produced by rotating the ``varnothing'' symbol from the
-% \textsc{ams} set. Note that the rotation angle here has been
-% carefully checked, but is set by eye. The symbol is loaded directly
-% here, rather than using the |amssymb| package, to avoid any
-% clashes.
+% The ``standard state'' symbol is handy. This is produced by
+% rotating the ``varnothing'' symbol from the \textsc{ams} set. Note
+% that the rotation angle here has been carefully checked, but is set
+% by eye. The symbol is loaded directly here, rather than using the
+% \pkg{amssymb} package, to avoid any clashes.
 %\changes{v1.1c}{2007/09/23}{Definition only occurs if user does not
 %  have own version}
 %\changes{v1.1c}{2007/09/23}{Altered angle of rotation for better
@@ -782,17 +892,99 @@
 %\end{macro}
 %\end{macro}
 %
+%\subsection{Alkyl radicals}
+%\begin{macro}{\cst@radical}
+%\changes{v1.2}{2008/03/07}{Re-write to allow definition to change at
+%  run-time}
+% The \cs{cst@radical} macro does the hard work of declaring each
+% abbreviation. The commands are made robust so they can (hopefully)
+% be used anywhere.
+%    \begin{macrocode}
+\newcommand*{\cst@radical}[2]{%
+  \expandafter\DeclareRobustCommand\expandafter*\expandafter{%
+    \csname #1#2\endcsname}{%
+%    \end{macrocode}
+%\begin{macro}{\cst@emph}
+%\begin{macro}{\cst@hyphen}
+%\begin{macro}{\cst@super}
+% To allow redefinition while running, the various component parts of
+% the system are defined each time an abbreviation is used.
+%    \begin{macrocode}
+    \ifcst@radhyphen
+      \def\cst@hyphen{-}%
+    \else
+      \let\cst@hyphen\relax
+    \fi
+    \ifcst@radsuper
+      \let\cst@super\textsuperscript
+    \else
+      \let\cst@super\relax
+    \fi
+    \ifcst@rademph
+      \let\cst@emph\emph
+    \else
+      \let\cst@emph\relax
+    \fi
+%    \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+% The final check is for a prefix, which is easiest to do here.
+%    \begin{macrocode}
+    \ifcst@radprefix
+      \cst@super{\cst@emph{#1}}\cst@hyphen#2%
+    \else
+      #2\cst@hyphen\cst@super{\cst@emph{#1}}%
+    \fi
+    \cst@xspace}}
+%    \end{macrocode}
+%\end{macro}
+%\begin{macro}{\cst@xspace}
+%\changes{v1.2}{2008/03/07}{New definition}
+% A re-useable \cs{xspace}-based macro.
+%    \begin{macrocode}
+\newcommand*{\cst@xspace}{%
+  \ifcst@xspace
+    \expandafter\xspace%
+  \fi}
+%    \end{macrocode}
+%\end{macro}
+%\begin{macro}{\nPr}
+%\begin{macro}{\iPr}
+%\begin{macro}{\nBu}
+%\begin{macro}{\iBu}
+%\begin{macro}{\sBu}
+%\begin{macro}{\tBu}
+% With a mechanism in place, the abbreviations are declared.  The
+% format of the resulting output will depend upon the configuration
+% file used.
+%    \begin{macrocode}
+\cst@radical{n}{Pr}%
+\cst@radical{i}{Pr}%
+\cst@radical{n}{Bu}%
+\cst@radical{i}{Bu}%
+\cst@radical{s}{Bu}%
+\cst@radical{t}{Bu}%
+%    \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%
 %\subsection{Float formatting}
 % The next step is to format the floats correctly. Unfortunately,
-% |memoir| does not provide all of the commands needed to achieve
-% this.  Thus the |float| package is needed; in order to load it, the
-% \cmd{\newfloat} command in |memoir| is killed off.  The
-% |chemscheme| package does not load |float| when |memoir| is being
-%  used, because creating a new float type is catered for directly
-% by |memoir|.  Unfortunately, the |memoir| system isn't flexible
-% enough for what is needed by |chemstyle|, so the hard work of
-% |chemscheme| is undone here!  For other document classes, |float|
-% will already have been loaded by |chemscheme|.
+% \pkg{memoir} does not provide all of the commands needed to achieve
+% this.  Thus the \pkg{float} package is needed; in order to load it,
+% the \cs{newfloat} command in \pkg{memoir} is killed off.  The
+% \pkg{chemscheme} package does not load \pkg{float} when
+% \pkg{memoir} is being used, because creating a new float type is
+% catered for directly by \pkg{memoir}.  Unfortunately, the
+% \pkg{memoir} system isn't flexible enough for what is needed by
+% \currpkg, so the hard work of \pkg{chemscheme} is undone here!  For
+% other document classes, \pkg{float} will already have been loaded
+% by \pkg{chemscheme}.
 %    \begin{macrocode}
 \@ifclassloaded{memoir}
   {\let\newfloat\@undefined
@@ -814,179 +1006,96 @@
 \floatplacement{figure}{htbp}
 %    \end{macrocode}
 % The contents of floats are centred by default, using the hook
-% from the |chemstyle| package.
+% from the \pkg{chemscheme} package.
 %    \begin{macrocode}
 \floatcontentscentre
 %    \end{macrocode}
 %
 %\subsection{Cross-references}
 %\changes{v1.1g}{2007/10/19}{Fixed problem with cross-referencing
-%  when \texttt{babel} is not loaded}
+%  when \pkg{babel} is not loaded}
 % The naming for cross-references is sorted out properly using the
-% |varioref| package.
+% \pkg{varioref} package.
 %    \begin{macrocode}
-\AtBeginDocument{%
-  \labelformat{scheme}{\schemename~#1}}
+\labelformat{scheme}{\schemename~#1}
 \labelformat{figure}{\figurename~#1}
 \labelformat{table}{\tablename~#1}
 %    \end{macrocode}
 %
-% \subsection{Latin words}
-%
+% \subsection{Latin phrases}
 %\begin{macro}{\latin}
 %\begin{macro}{\cst@latin}
 %\changes{v1.1}{2007/09/17}{New macro}
+%\changes{v1.2}{2008/03/07}{Change of definition to allow better
+%  working with run-time options}
 %\begin{macro}{\latinemphon}
+%\changes{v1.2}{2008/03/07}{New definition to work with \pkg{xkeyval}
+%  system}
 %\begin{macro}{\latinemphoff}
+%\changes{v1.2}{2008/03/07}{New definition to work with \pkg{xkeyval}
+%  system}
 % A series of Latin phrases are provided, with a quick switch to
-% print them in Roman letters if needed.  A mechanism is needed
-% to alter the effect of the \cmd{\latin} command \emph{only}
-% if the user does not have their own version.  This is achieved
-% here, with precautions taken to ensure the user can define
-% their own \cmd{\latin} command \emph{after} loading |chemstyle|
-% and still have everything work properly.
-%    \begin{macrocode}
-\let\latinemphon\relax
-\let\latinemphoff\relax
-\let\cst@latin\relax
-\ifcst@phrases
-  \newcommand{\latinemphon}{\let\cst@latin\emph}
-  \newcommand{\latinemphoff}{\let\cst@latin\relax}
-  \AtBeginDocument{%
-    \providecommand\latin{\cst@latin}
-  }
-\fi
-\latinemphon
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-% In ACS journals, the abbreviations ``\eg'' and ``\ie'' are always
-% followed by a comma.  In order to provide an automated way to do
-% this, a series of macros are needed to test the punctuation
-% trailing the macro names.  Firstly, a switch is provided for the
-% journal style files.
-%    \begin{macrocode}
-\newif  \ifcst@comma    \cst@commafalse
-%    \end{macrocode}
-% The implementation of the testing code is delayed until the
-% beginning of the document to allow the switching to occur.  First
-% the case where a comma is needed is handled.
-%    \begin{macrocode}
-\AtBeginDocument{%
-  \ifcst@comma
-%    \end{macrocode}
-%\begin{macro}{\cst@punct}
-% The \cmd{\cst@punct} macro holds the comma-containing punctuation
-% to be added.
-%    \begin{macrocode}
-    \def\cst@punct{.,\cst@xspace}
-%    \end{macrocode}
-%\end{macro}
-%\begin{macro}{\cst@addpunct}
-%\changes{v1.1}{2007/09/17}{New macro}
-%\changes{v1.1f}{2007/10/14}{No longer used when comma not required}
-%\begin{macro}{\cst@add@punct}
-%\changes{v1.1}{2007/09/17}{New macro}
-%\begin{macro}{\cst@add@punct@}
-%\changes{v1.1}{2007/09/17}{New macro}
-% The following macros are very closely based on those in the |cite|
-% package used for moving citations after punctuation.  The first
-% macro is used as an initial hook.  Notice that \cmd{\relax} is
-% essential here, as it provides an argument for \cmd{\cst@add@punct}
-% in the first round of checking.
-%    \begin{macrocode}
-    \def\cst@addpunct{%
-      \cst@add@punct\relax%
-    }
-%    \end{macrocode}
-% Here, a plain TeX \cmd{\futurelet} is used to test the next
-% character. Notice that this macro takes a single argument, which is
-% used to recursively gobble up punctuation.
-%    \begin{macrocode}
-    \def\cst@add@punct#1{%
-      \futurelet\@tempa\cst@add@punct@%
-    }
-%    \end{macrocode}
-% The checking occurs here.  If a match is made, then the process is
-% repeated to allow the punctuation to be gobbled.
-%    \begin{macrocode}
-    \def\cst@add@punct@{%
-      \ifx\@tempa.%
-        \let\@tempb\cst@add@punct%
-      \else
-        \ifx\@tempa,%
-          \let\@tempb\cst@add@punct%
-%    \end{macrocode}
-% No match, and so new punctuation is to be added and the loop ended.
+% print them in Roman letters if needed.  A mechanism is needed to
+% alter the effect of the \cs{latin} command \emph{only} if the user
+% does not have their own version.  This is achieved here, with
+% precautions taken to ensure the user can define their own
+% \cs{latin} command \emph{after} loading \currpkg and still have
+% everything work properly.
 %    \begin{macrocode}
-        \else
-          \let\@tempb\cst@punct%
-        \fi
-      \fi
-      \@tempb%
-    }
-  \fi
-}
+\newcommand*{\cst@latin}{%
+  \ifcst@abbremph
+    \expandafter\emph%
+  \fi}
+\newcommand*{\latinemphon}{\cstsetup{abbremph=true}}
+\newcommand*{\latinemphoff}{\cstsetup{abbremph=false}}
+\AtBeginDocument{\providecommand*\latin{\cst@latin}}
 %    \end{macrocode}
 %\end{macro}
 %\end{macro}
 %\end{macro}
-%
-%\begin{macro}{\cst@xspace}
-% The use of |xspace| is optional; this is handled using a package
-% option and the internal macro \cmd{\cst@xspace}.
-%    \begin{macrocode}
-\ifcst@xspace
-  \RequirePackage{xspace}
-  \let\cst@xspace\xspace
-\else
-  \let\cst@xspace\relax
-\fi
-%    \end{macrocode}
 %\end{macro}
-%
 %\begin{macro}{\etc}
 %\begin{macro}{\invacuo}
 %\begin{macro}{\etal}
 %\changes{v1.1f}{2007/10/14}{Fixed problem with full stop spacing}
 %\begin{macro}{\eg}
-%\changes{v1.1}{2007/09/17}{Adds comma for ACS journals}
+%\changes{v1.1}{2007/09/17}{Adds comma for \textsc{acs} journals}
 %\changes{v1.1f}{2007/10/14}{Fixed problem with full stop spacing}
 %\changes{v1.1f}{2007/10/14}{Definition comma-mode dependent}
+%\changes{v1.2}{2008/03/07}{Dynamic definition for comma mode}
 %\begin{macro}{\ie}
-%\changes{v1.1}{2007/09/17}{Adds comma for ACS journals}
+%\changes{v1.1}{2007/09/17}{Adds comma for \textsc{acs} journals}
 %\changes{v1.1f}{2007/10/14}{Fixed problem with full stop spacing}
 %\changes{v1.1f}{2007/10/14}{Definition comma-mode dependent}
+%\changes{v1.2}{2008/03/07}{Dynamic definition for comma mode}
 % For the macros themselves, care is taken about trailing full stops.
-% The \cmd{\xspace} command deals with any problems of spacing.
+% The \cs{xspace} command deals with any problems of spacing.
 % Things could go wrong with complex punctuation, as no other checks
-% are performed.  All of these functions use \cmd{\providecommand}
+% are performed.  All of these functions use \cs{providecommand}
 % to avoid standing on the user's own versions, if they exist.
 %    \begin{macrocode}
 \ifcst@phrases
   \AtBeginDocument{
-    \providecommand{\etc}%
+    \providecommand*{\etc}
       {\@ifnextchar.{\cst@etc}{\cst@etc.\cst@xspace}}
-    \providecommand{\invacuo}%
+    \providecommand*{\invacuo}
       {\latin{in vacuo}\cst@xspace}
-    \providecommand{\etal}%
+    \providecommand*{\etal}
       {\@ifnextchar.{\cst@etal}{\cst@etal.\cst@xspace}}
-    \ifcst@comma
-      \providecommand{\eg}%
-        {\cst@eg\cst@addpunct}
-      \providecommand{\ie}%
-        {\cst@ie\cst@addpunct}
-    \else
-      \providecommand{\eg}%
-        {\@ifnextchar.{\cst@eg}{\cst@eg.\cst@xspace}}
-      \providecommand{\ie}%
-        {\@ifnextchar.{\cst@ie}{\cst@ie.\cst@xspace}}
-    \fi
-  }
-\fi
+    \providecommand*{\eg}
+      {\ifcst@abbrcomma
+         \expandafter\cst@commaabbr%
+       \else
+         \expandafter\cst@nocommaabbr%
+       \fi
+       {eg}}
+    \providecommand*{\ie}
+      {\ifcst@abbrcomma
+         \expandafter\cst@commaabbr%
+       \else
+         \expandafter\cst@nocommaabbr%
+       \fi
+       {ie}}}
 %    \end{macrocode}
 % \end{macro}
 % \end{macro}
@@ -1006,158 +1115,251 @@
 % cannot come at the end of a sentence, they are designed to give
 % only an inter-word space.
 %    \begin{macrocode}
-\def\cst@etal{\latin{et~al}}
-\def\cst@etc{\latin{etc}}
-\def\cst@ie{\latin{i.e\spacefactor999\relax}}
-\def\cst@eg{\latin{e.g\spacefactor999\relax}}
+\newcommand*{\cst@etal}{\latin{et~al}}
+\newcommand*{\cst@etc}{\latin{etc}}
+\newcommand*{\cst@ie}{\latin{i.e\spacefactor999\relax}}
+\newcommand*{\cst@eg}{\latin{e.g\spacefactor999\relax}}
 %    \end{macrocode}
 %\end{macro}
 %\end{macro}
 %\end{macro}
 %\end{macro}
-%
-% \subsection{Handling section naming}
-%
-% First, a new if is needed to differentiate between ``Notes and
-% References'' and ``References and Notes.''
+%\begin{macro}{\cst@commaabbr}
+%\changes{v1.2}{2008/03/07}{New macro}
+%\begin{macro}{\cst@nocommaabbr}
+%\changes{v1.2}{2008/03/07}{New macro}
+% To handle the comma issue, two general macros are used.
 %    \begin{macrocode}
-\newif  \ifcst@notesbefore  \cst@notesbeforetrue
+\newcommand*{\cst@commaabbr}[1]{%
+  \csname cst@#1\endcsname%
+  \cst@addpunct}
+\newcommand*{\cst@nocommaabbr}[1]{%
+  \@ifnextchar.%
+    {\csname cst@#1\endcsname}
+    {\csname cst@#1\endcsname.\cst@xspace}}
 %    \end{macrocode}
-% \begin{macro}{\cst@name@refs}
-% To keep life simple in the main macro, and to save on redundant
-% code, the ordering of ``Notes,'' ``and'' and ``References'' is
-% handled here.
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\cst@addpunct}
+%\changes{v1.1}{2007/09/17}{New macro}
+%\changes{v1.1f}{2007/10/14}{No longer used when comma not required}
+% The following macros are very closely based on those in the
+% \pkg{cite} package used for moving citations after punctuation.
+% The first macro is used as an initial hook.  Notice that
+% \cs{relax} is essential here, as it provides an argument for
+% \cs{cst@add@punct} in the first round of checking.
 %    \begin{macrocode}
-\def\cst@name@refs#1#2#3{%
-  \ifcst@notesbefore
-    #3\space#2\space#1%
+\newcommand*{\cst@addpunct}{%
+  \cst@add@punct\relax}
+%    \end{macrocode}
+%\end{macro}
+%\begin{macro}{\cst@add@punct}
+%\changes{v1.1}{2007/09/17}{New macro}
+% Here, a plain \TeX\ \cs{futurelet} is used to test the next
+% character. Notice that this macro takes a single argument, which is
+% used to recursively gobble up punctuation.
+%    \begin{macrocode}
+\newcommand*{\cst@add@punct}[1]{%
+  \futurelet\cst@tempa\cst@add@punct@}
+%    \end{macrocode}
+%\end{macro}
+%\begin{macro}{\cst@add@punct@}
+%\changes{v1.1}{2007/09/17}{New macro}
+%\changes{v1.2}{2008/03/07}{Internal tweaks}
+%\begin{macro}{\cst@tempa}
+%\begin{macro}{\cst@tempb}
+% The checking occurs here.  If a match is made, then the process is
+% repeated to allow the punctuation to be gobbled.
+%    \begin{macrocode}
+\newcommand*{\cst@add@punct@}{%
+  \ifx.\cst@tempa
+    \let\cst@tempb\cst@add@punct
   \else
-    #1\space#2\space#3%
+    \ifx,\cst@tempa
+      \let\cst@tempb\cst@add@punct
+%    \end{macrocode}
+% No match, and so new punctuation is to be added and the loop ended.
+%    \begin{macrocode}
+    \else
+      \let\cst@tempb\cst@commapunct
+    \fi
   \fi
-}
+  \cst@tempb}
 %    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\cst@language}
-% The default language of the document is probably English.  However,
-% this is alterable if needed, as it is not set in stone.
-% Anyone needing to mess with this is probably happy using
-% \cmd{\makeatletter}, so the command is kept out of user space.
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\cst@commapunct}
+%\changes{v1.2}{2008/03/07}{Name change from \cs{cst@punct}}
+% The \cs{cst@punct} macro holds the comma-containing punctuation to
+% be added.
 %    \begin{macrocode}
-\def\cst@language{english}
+\newcommand*{\cst@commapunct}{.,\cst@xspace}
 %    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\cst@refsection}
-%\changes{v1.1g}{2007/10/19}{Changed to use \cs{@ifundefined}}
-% The existence of a suitable reference section name command is
-% checked here.  Some document classes (\eg\ minimal) may not define
-% a suitable command. Assuming that is not the case,
-% \cmd{\cst@refsection} is used to store the name of the macro
-% holding the references section.
+%\end{macro}
+%
+%\subsection{Loading the style definition}
+% The style definition is loaded here, once everything necessary is
+% in place.  A style must be loaded, so a default is provided to be
+% on the safe side.  The journal style file must have extension
+% \ext{jdf}.
+%\changes{v1.1b}{2007/09/19}{Load \pkg{caption} even when
+%  journal style does not exist}
 %    \begin{macrocode}
-\@ifundefined{refname}{%
-  \@ifundefined{bibname}{%
-     \PackageWarning{chemstyle}%
-       {No bibliography name command defined in document class}%
-     \def\cst@namerefs#1#2#3#4{}%
-  }{%
-     \def\cst@refsection{\bibname}%
-  }
-}{%
-   \def\cst@refsection{\refname}%
-}
+\InputIfFileExists{\cst@journal.jdf}
+  {\PackageInfo{chemstyle}
+    {Loaded \cst@journal.jdf}}
+  {\PackageWarning{chemstyle}
+    {Requested style `\cst@journal' does not exist\MessageBreak
+     Loading default style}
+    \InputIfFileExists{none.jdf}{}
+      {\PackageError{chemstyle}{Failed to load none.jdf}
+         {The default journal definition file was not
+          found\MessageBreak This is a core part of chemstyle
+          \MessageBreak Something is wrong with the installation}}}
 %    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\cst@namerefs}
-%\changes{v1.1g}{2007/10/19}{Changed to use \cs{@ifundefined}}
-% \begin{macro}{\cst@language@check}
-% The main macro of the heading-altering section takes four
-% arguments, \marg{language}, \marg{references}, \marg{and}
-% and \marg{notes}.  The first is the |babel| label for the language
-% that the words are four, and the other three parameters and the
-% words ``References'', ``and'' and ``Notes'', respectively.
+%
+% \subsection{Handling reference section naming}
+%\changes{v1.2}{2008/03/07}{Re-write of reference-section renaming
+%  code}
+%\begin{macro}{\cst@refsec}
+%\changes{v1.2}{2008/03/07}{New macro}
+% To enable the renaming of \cs{bibname} or \cs{refname} to the
+% desired value, some work is needed.  Both \pkg{natbib} and
+% \pkg{biblatex} alter the behaviour here subtly.  The \pkg{babel}
+% package also requires careful handling.  The initial step is to fin
+% whether the document class defines chapters, as this affects
+% whether \cs{refname} or \cs{bibname} should be changed.  This is
+% done inside a group so that a false definition is not left
+% around.\footnote{If \cs{@undefined} is ever fixed, this will no
+% longer be needed.  If \eTeX\ was required, the \cs{ifdefined} would be
+% a choice here; however, \eTeX\ is not going to be required just for
+% this.}  A second check is needed, in case the document class does not
+% define any reference section at all (for example, minimal does
+% not).
 %    \begin{macrocode}
-\@ifundefined{cst@namerefs}{%
-  \def\cst@namerefs#1#2#3#4{%
-    \ifcst@notes%
+\begingroup 
+  \@ifundefined{chapter}
+    {\@ifundefined{refname}
+       {\PackageInfo{chemstyle}
+          {No bibliography name command found}
+        \cstsetup{notes=false}}
+       {\gdef\cst@refsec{\refname}}}
+    {\gdef\cst@refsec{\bibname}}
+\endgroup
 %    \end{macrocode}
-% The non-|babel| version of the function only does anything if the
-% language passed in |#1| is the default document language (probably
-% English). The check for this needs the macro
-% \cmd{\cst@language@check} to get |\ifx| to behave as desired.
+%\end{macro}
+%\begin{macro}{\c@bibnote}
+% The business-end of the work is only carried out if the \opt{notes}
+% option is set to \opt{true} or \opt{auto}.  The check above means
+% that a reference section is also defined.  First, some checking for
+% the \opt{auto} option occurs; the counter used by \pkg{notes2bib}
+% needs to be defined even if the package is not loaded.
 %    \begin{macrocode}
-      \def\cst@language@check{#1}
-      \ifx\cst@language\cst@language@check
-        \expandafter\renewcommand\expandafter{\cst@refsection}%
-          {\cst@name@refs{#2}{#3}{#4}}%
-      \fi
+\ifcst@autonotes
+  \AtBeginDocument{
+    \@ifpackageloaded{notes2bib}{}
+      {\newcounter{bibnote}}}
+\fi
 %    \end{macrocode}
-% To ensure that things work whether |babel| is loaded or not, a few
-% hoops have to be jumped through.  Altering the |babel| strings is
-% delayed until the start of the document, in case |babel| is loaded
-% after |chemstyle|.  There is also a complication that MikTeX
-% defines \cmd{\languagename} even if |babel| is not loaded.  This
-% may contain an undesired value, and so the presence of |babel|
-% needs to be tested for to avoid strange errors.
+%\end{macro}
+%\begin{macro}{\cst@refname}
+%\changes{v1.2}{2008/03/07}{New macro}
+%\begin{macro}{\cst@ref@name}
+%\changes{v1.2}{2008/03/07}{New macro}
+%\begin{macro}{\cst@ref@name@}
+%\changes{v1.2}{2008/03/07}{New macro}
+% The internal macros to actually display the reference section name
+% deals with the various options.  The \cs{expandafter}s are for
+% caution here: nothing \emph{should} go wrong with the nested
+% \cs{if} statements.
 %    \begin{macrocode}
-      \AtBeginDocument{%
-        \@ifpackageloaded{babel}{%
-          \expandafter\addto\expandafter{\csname captions#1\endcsname}%
-            {\expandafter\renewcommand\expandafter{\cst@refsection}%
-            {\cst@name@refs{#2}{#3}{#4}}}%
-          \expandafter\selectlanguage\expandafter{\languagename}}
-        {}}
-    \else%
-      \ifx#1\cst@language
-        \expandafter\renewcommand\expandafter{\cst@refsection}{#2}%
+\newcommand*{\cst@refname}{%
+  \ifcst@notes
+    \ifcst@autonotes
+      \ifnum\the\value{bibnote}>\z@
+        \expandafter\expandafter\expandafter\expandafter\expandafter
+          \expandafter\expandafter\cst@ref@name%
+      \else
+        \expandafter\expandafter\expandafter\expandafter\expandafter
+          \expandafter\expandafter\cst@ref@name@%
       \fi
-      \AtBeginDocument{%
-        \@ifpackageloaded{babel}{%
-          \expandafter\addto\expandafter{\csname captions#1\endcsname}%
-            {\expandafter\renewcommand\expandafter{\cst@refsection}{#2}}%
-          \expandafter\selectlanguage\expandafter{\languagename}}%
-        {}}
-    \fi%
-  }
-}{}
+    \else
+      \expandafter\expandafter\expandafter\cst@ref@name%
+    \fi
+  \else
+    \expandafter\cst@ref@name@%
+  \fi}
+\newcommand*{\cst@ref@name}[3]{%
+  \ifcst@notesbefore
+    #3\space#2\space#1%
+  \else
+    #1\space#2\space#3%
+  \fi}
+\newcommand*{\cst@ref@name@}[3]{#1}
 %    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% Finally, default names are loaded for a range of languages.  Most
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\cst@setrefname}
+%\changes{v1.2}{2008/03/07}{New macro}
+% Setting up the section name is a tricky affair.  If no section is
+% defined, then the whole process is skipped.  Otherwise, the first
+% check made s if the default language matches the definition given.
+% If so, the heading is changed now.
+%    \begin{macrocode}
+\@ifundefined{cst@refsec}
+  {\let\cst@setrefname\@gobblefour}
+  {\newcommand*{\cst@setrefname}[4]{
+     \edef\cst@tempa{#1}%
+     \ifx\cst@tempa\cst@language
+       \expandafter\renewcommand\expandafter*\expandafter{%
+         \cst@refsec}
+         {\cst@refname{#2}{#3}{#4}}
+     \fi
+%    \end{macrocode}
+%\begin{macro}{cst@tempa}
+% At the beginning of the document, a check needs to be made for
+% \pkg{babel} and \pkg{biblatex}.  For the later, a low-level hack is
+% made to attach to the mechanism.  For \pkg{babel} the appropriate
+% commands are added to the \cs{captions\ldots} macro.
+%    \begin{macrocode}
+     \AtBeginDocument{
+       \@ifpackageloaded{biblatex}
+         {\def\cst@tempa{\csgappto{bib@strings@#1}}
+          \expandafter\cst@tempa\expandafter{\expandafter\renewcommand%
+            \expandafter*\expandafter{\cst@refsec}{%
+              \cst@refname{#2}{#3}{#4}}}}
+         {\@ifpackageloaded{babel}
+           {\def\cst@tempa{\expandafter\addto\expandafter{%
+              \csname captions#1\endcsname}}
+            \expandafter\cst@tempa\expandafter
+              {\expandafter\renewcommand\expandafter*\expandafter%
+                {\cst@refsec}{\cst@refname{#2}{#3}{#4}}}
+%    \end{macrocode}
+%\end{macro}
+% To make sure the changes are applied \emph{now}, the current
+% language is re-selected.
+%    \begin{macrocode}
+            \expandafter\selectlanguage\expandafter{\languagename}}
+           {}}}}}
+%    \end{macrocode}
+%\end{macro}
+% Default names are loaded for a range of languages.  Most
 % journals stick to the same words, with only the order changing.
 %\changes{v1.1c}{2007/09/23}{Added \texttt{german} alias for
 %  \texttt{ngerman}}
 %\changes{v1.1c}{2007/09/23}{Added \texttt{frenchb} alias for
 %  \texttt{french}}
 %    \begin{macrocode}
-\cst@namerefs{english}{References}{and}{Notes}
-\cst@namerefs{UKenglish}{References}{and}{Notes}
-\cst@namerefs{ngerman}{Literatur}{und}{Notizen}
-\cst@namerefs{german}{Literatur}{und}{Notizen}
-\cst@namerefs{french}{R\'ef\'erences}{et}{Notes}
-\cst@namerefs{frenchb}{R\'ef\'erences}{et}{Notes}
+\cst@setrefname{english}{References}{and}{Notes}
+\cst@setrefname{UKenglish}{References}{and}{Notes}
+\cst@setrefname{ngerman}{Literatur}{und}{Notizen}
+\cst@setrefname{german}{Literatur}{und}{Notizen}
+\cst@setrefname{french}{R\'ef\'erences}{et}{Notes}
+\cst@setrefname{frenchb}{R\'ef\'erences}{et}{Notes}
 %    \end{macrocode}
 %
-% \subsection{Loading the style definition}
-%
-% The style definition is loaded here, once else  everything is in
-% place.  A style must be loaded, so a default is provided to be on
-% the safe side.  The journal style file must have extension
-% |.jdf|.
-%\changes{v1.1b}{2007/09/19}{Load \texttt{caption} even when
-%  journal style does not exist}
-%    \begin{macrocode}
-\ifx\cst@option\relax
-  \PackageWarning{chemstyle}
-    {You didn't say which style to use \MessageBreak
-     Defaulting to the ``no change'' style: none}
-  \def\cst@option{none}
-\fi
-\InputIfFileExists{\cst@option.jdf}
-  {\PackageInfo{chemstyle}
-    {Loaded \cst@option.jdf}}
-  {\PackageWarning{chemstyle}
-    {Required style \cst@option\space does not exist}}
-%    \end{macrocode}
 % \iffalse
 %</package>
 % \fi
@@ -1183,12 +1385,13 @@
 \AtBeginDocument{%
   \renewcommand{\figurename}{Fig.}}
 \captionsetup{labelsep=quad,labelfont=bf}
-\let\cst@emph\emph
-\def\cst@hyph{-}
-\let\cst@super\relax
-\cst@prefixtrue
-\latinemphon
-\cst@commafalse
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=true,
+  abbremph=true,
+  abbrcomma=false}
 %    \end{macrocode}
 % \iffalse
 %</rsc>
@@ -1202,12 +1405,13 @@
 \ProvidesFile{angew.def}[2007/10/31 v1.1h]
 \captionsetup{labelsep=period,labelfont={bf,it},font=sf,singlelinecheck=off}
 \captionsetup[table]{labelsep=colon}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\relax
-\cst@prefixtrue
-\latinemphoff
-\cst@commafalse
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=false}
 %    \end{macrocode}
 % \iffalse
 %</angew>
@@ -1222,12 +1426,14 @@
 \captionsetup[table]{labelsep=newline,singlelinecheck=off}
 \AtBeginDocument{%
   \renewcommand{\figurename}{Fig.}}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
-\latinemphoff
-\cst@commafalse
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=true,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=false,
+  notesbefore=true}
 %    \end{macrocode}
 % \iffalse
 %</jomc>
@@ -1239,12 +1445,14 @@
 %    \begin{macrocode}
 \ProvidesFile{tetlett.def}[2007/10/31 v1.1h]
 \captionsetup{labelsep=period,singlelinecheck=off,labelfont=bf}
-\let\cst@emph\emph
-\def\cst@hyph{-}
-\let\cst@super\relax
-\cst@prefixtrue
-\latinemphoff
-\cst@commatrue
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=true,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 %    \end{macrocode}
 % \iffalse
 %</tetlett>
@@ -1258,16 +1466,18 @@
 \captionsetup{labelfont={bf,it,sf},textfont=sf,labelsep=perquad}
 \captionsetup[figure]{textfont=rm}
 \captionsetup{singlelinecheck=off}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=true,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \floatstyle{plaintop}
 \restylefloat{scheme}
 \floatstyle{plain}
-\latinemphoff
 \cst@notesbeforefalse
-\cst@commatrue
 %    \end{macrocode}
 % \iffalse
 %</jacs>
@@ -1295,16 +1505,18 @@
 \captionsetup{font=bf,labelsep=colon,format=labelcaps}
 \captionsetup[figure]{format=plain,textfont=md,labelsep=period}
 \captionsetup{singlelinecheck=off}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \floatstyle{plaintop}
 \restylefloat{scheme}
 \floatstyle{plain}
-\latinemphoff
 \cst@notesbeforefalse
-\cst@commatrue
 %    \end{macrocode}
 %\iffalse
 %</jpc>
@@ -1319,44 +1531,50 @@
 %    \end{macrocode}
 %\begin{macro}{\OrgLettColour}
 % To allow the user to control the colour of the ``bars'' in this
-% style, an additional macro is provided.  The |purple| colour looks
+% style, an additional macro is provided.  The purple colour looks
 % about right for matching the printed journal, but if anyone has a
 % better suggestion please let the package author know.
 %    \begin{macrocode}
 \newcommand*{\OrgLettColour}{purple}
 %    \end{macrocode}
 %\end{macro}
+%\begin{macro}{\fs@orglett}
 % In order to get the distinctive coloured bars used by
 % \emph{Org.~Lett.}, a new style for floats is needed.  This is based
-% on the |ruled| style from the |float| package.
+% on the \texttt{ruled} style from the \pkg{float} package.
 %    \begin{macrocode}
-\newcommand\fs@orglett{\def\@fs@cfont{\bfseries}
+\newcommand*{\fs@orglett}{%
+  \def\@fs@cfont{\bfseries}%
   \let\@fs@capt\floatc@ruled
   \def\@fs@pre{\begingroup\color{\OrgLettColour}
     \hrule height12pt depth0pt \kern2pt\endgroup}%
 %    \end{macrocode}
-% This is the same \cmd{\@fs@mid} as is used in the |float| package
-% for |plaintop| floats.
+% This is the same \cs{@fs@mid} as is used in the \pkg{float} package
+% for \texttt{plaintop} floats.
 %    \begin{macrocode}
   \def\@fs@mid{\vspace\belowcaptionskip\relax}%
   \def\@fs@post{\begingroup\color{\OrgLettColour}\kern2pt
     \hrule height1.5pt depth0pt\endgroup}%
   \let\@fs@iftopcapt\iftrue}
 %    \end{macrocode}
+%\end{macro}
+%\begin{macro}{\fs@orglettfig}
 % Figures need to be slightly different, so an almost identical
 % command is needed.
 %    \begin{macrocode}
-\newcommand\fs@orglettfig{\def\@fs@cfont{\bfseries}
+\newcommand*{\fs@orglettfig}{%
+  \def\@fs@cfont{\bfseries}%
   \let\@fs@capt\floatc@plain
-  \def\@fs@pre{\begingroup\color{\OrgLettColour}
+  \def\@fs@pre{\begingroup\color{\OrgLettColour}%
     \hrule height12pt depth0pt \kern2pt\endgroup}%
   \def\@fs@mid{\vspace\abovecaptionskip\relax}%
   \def\@fs@post{\begingroup\color{\OrgLettColour}\kern2pt
     \hrule height1.5pt depth0pt\endgroup}%
   \let\@fs@iftopcapt\iffalse}
 %    \end{macrocode}
+%\end{macro}
 % The new style is now applied.  Users can change back to normal
-% floats by changing back to the |plain| style.
+% floats by changing back to the \texttt{plain} style.
 %    \begin{macrocode}
 \floatstyle{orglettfig}
 \restylefloat{figure}
@@ -1368,19 +1586,20 @@
 %    \begin{macrocode}
 \DeclareCaptionLabelSeparator{perquad}{.\quad}
 \captionsetup{labelfont=bf,labelsep=perquad}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
-\latinemphoff
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=true,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \cst@notesbeforefalse
-\cst@commatrue
 %    \end{macrocode}
 % \iffalse
 %</orglett>
 %<*none>
 %\fi
-%
 %\subsection{The empty style --- none}
 % To allow the user to load the extra macros provided here without
 % any style changes, a ``do nothing'' style is provided.  It simply
@@ -1391,7 +1610,6 @@
 % notice that captions will be placed below floats even if the
 % \cmd{\caption} command appears above the contents of the floating
 % environment.
-%
 %    \begin{macrocode}
 \ProvidesFile{none.jdf}[2007/10/31 v1.1h]
 \floatstyle{plain}
@@ -1411,29 +1629,18 @@
 % \Finale
 %\iffalse
 %<*jawltxdoc>
-% The following is convenient method for collecting together package
-% loading, formatting commands and new macros used to format |dtx|
-% files written by the current author.  It is based on the similar
-% files provided by Will Robertson in his packages and Heiko Oberdiek
-% as a stand-alone package.  Notice that it is not intended for other
-% users: there is no error checking!  However, it is covered by the
-% LPPL in the same way as the rest of this package.
-%
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{jawltxdoc}
-  [2007/10/14 v1.0b]
-% First of all, a number of support packages are loaded.
 \usepackage[T1]{fontenc}
 \usepackage[english,UKenglish]{babel}
 \usepackage[scaled=0.95]{helvet}
 \usepackage[version=3]{mhchem}
 \usepackage[final]{microtype}
 \usepackage[osf]{mathpazo}
-\usepackage{booktabs,array,url,graphicx,courier,unitsdef}
-\usepackage{upgreek,ifpdf,listings}
-% If using PDFLaTeX, the source will be attached to the PDF. This
-% is basically the system used by Heiko Oberdiek, but with a check
-% that PDF mode is enabled.
+\usepackage{booktabs,array,url,graphicx,courier,xspace}
+\usepackage{upgreek,ifpdf,listings,float,caption,longtable}
+\floatstyle{plaintop}
+\restylefloat{table}
 \ifpdf
   \usepackage{embedfile}
   \embedfile[%
@@ -1442,19 +1649,15 @@
     desc={LaTeX docstrip source archive for package `\jobname'}%
     ]{\jobname.dtx}
 \fi
-\usepackage{\jobname}
+\IfFileExists{\jobname.sty}
+  {\usepackage{\jobname}}{}
 \usepackage[numbered]{hypdoc}
-%
-% To typeset examples, a new environment is needed.  The code below
-% is based on that in used by |listings|, but is modified to get
-% better formatting for this context.  The formatting of the output
-% is basically that in Will Robertson's |dtx-style| file.
 \newlength\LaTeXwidth
 \newlength\LaTeXoutdent
 \newlength\LaTeXgap
 \setlength\LaTeXgap{1em}
 \setlength\LaTeXoutdent{-0.15\textwidth}
-\def\typesetexampleandcode{%
+\newcommand*{\typesetexampleandcode}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin\LaTeXoutdent
@@ -1471,7 +1674,7 @@
     \end{minipage}%
   \end{list}
 }
-\def\typesetcodeandexample{%
+\newcommand*{\typesetcodeandexample}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin{0pt}
@@ -1484,7 +1687,7 @@
     \lst@sampleInput
   \end{list}
 }
-\def\typesetfloatexample{%
+\newcommand*{\typesetfloatexample}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin{0pt}
@@ -1497,7 +1700,7 @@
     \end{minipage}%
   \end{list}
 }
-\def\typesetcodeonly{%
+\newcommand*{\typesetcodeonly}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin{0pt}
@@ -1516,25 +1719,16 @@
   \let\typesetexample#1
   \global\let\lst@intname\@empty
   \setbox\lst@samplebox=\hbox\bgroup
-  \setkeys{lst}{language=[LaTeX]{TeX},tabsize=4,gobble=2,%
-    breakindent=0pt,basicstyle=\small\ttfamily,basewidth=0.51em,%
-    keywordstyle=\color{blue},%
-% Notice that new keywords should be added here. The list is simply
-% macro names needed to typeset documentation of the package
-% author.
-    morekeywords={bibnote,citenote,bibnotetext,bibnotemark,%
-      thebibnote,bibnotename,includegraphics,schemeref,%
-      floatcontentsleft,floatcontentsright,floatcontentscentre,%
-      schemerefmarker,compound,schemerefformat,color,%
-      startchemical,stopchemical,chemical,setupchemical,bottext,%
-      listofschemes}}
+  \setkeys{lst}{tabsize=4,gobble=3,breakindent=0pt,%
+    basicstyle=\small\ttfamily,basewidth=0.51em,%
+    keywordstyle=\color{blue}}
   \lst@BeginAlsoWriteFile{\LaTeXexamplefile}
 }{%
   \lst@EndWriteFile\egroup
   \setlength\LaTeXwidth{\wd\lst@samplebox}
   \typesetexample%
 }
-\def\lst@sampleInput{%
+\newcommand*{\lst@sampleInput}{%
   \MakePercentComment\catcode`\^^M=10\relax
   \small%
   {\setkeys{lst}{SelectCharTable=\lst@ReplaceInput{\^\^I}%
@@ -1542,6 +1736,41 @@
     \leavevmode \input{\LaTeXexamplefile}}%
   \MakePercentIgnore%
 }
-\hyphenation{PDF-LaTeX}
+\def\DescribeOption{\leavevmode\@bsphack\begingroup\MakePrivateLetters
+  \Describe@Option}
+\def\Describe@Option#1{\endgroup
+              \marginpar{\raggedleft\PrintDescribeEnv{#1}}%
+              \SpecialOptionIndex{#1}\@esphack\ignorespaces}
+\def\SpecialOptionIndex#1{\@bsphack
+    \index{#1\actualchar{\protect\ttfamily#1}
+           (option)\encapchar usage}%
+    \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
+           usage}\@esphack}
+\newcommand*{\pkg}[1]{\textsf{#1}}
+\newcommand*{\currpkg}{\pkg{\jobname}\xspace}
+\newcommand*{\opt}[1]{\texttt{#1}}
+\newcommand*{\file}[1]{\texttt{#1}}
+\newcommand*{\ext}[1]{\file{.#1}}
+\newcommand*{\latin}[1]{\emph{#1}}
+\newcommand*{\etc}{%
+  \@ifnextchar.
+    {\latin{etc}}
+    {\latin{etc.}}
+  \xspace}
+\newcommand*{\eg}{%
+  \@ifnextchar.
+    {\latin{e.g}}
+    {\latin{e.g.}}
+  \xspace}
+\newcommand*{\ie}{%
+  \@ifnextchar.
+    {\latin{i.e}}
+    {\latin{i.e.}}
+  \xspace}
+\newcommand*{\AMS}{{\protect\usefont{OMS}{cmsy}{m}{n}%
+  A\kern-.1667em\lower.5ex\hbox{M}\kern-.125emS}}
+\providecommand*{\eTeX}{\ensuremath{\varepsilon}-\TeX}
+\newcommand*{\XeTeX}
+  {X\kern-.125em\lower.5ex\hbox{\reflectbox{E}}\kern-.1667em\TeX}
 %</jawltxdoc>
 %\fi
diff --git a/Master/texmf-dist/source/latex/chemstyle/chemstyle.ins b/Master/texmf-dist/source/latex/chemstyle/chemstyle.ins
index 6e2a49e598c..49063a4b317 100644
--- a/Master/texmf-dist/source/latex/chemstyle/chemstyle.ins
+++ b/Master/texmf-dist/source/latex/chemstyle/chemstyle.ins
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
@@ -21,17 +21,17 @@
  The chemstyle package --- Writing chemistry with style
  Maintained by Joseph Wright
  E-mail: joseph.wright@morningstar2.co.uk
- Released under the LaTeX Project Public License v1.3 or later
+ Released under the LaTeX Project Public License v1.3c or later
  See http://www.latex-project.org/lppl.txt
  ----------------------------------------------------------------
 
 \endpreamble
 \Msg{Generating chemstyle files:}
-\usedir{tex/latex/contib/chemstyle}
+\usedir{tex/latex/chemstyle}
 \generate{\file{\jobname.ins}{\from{\jobname.dtx}{install}}
           \file{\jobname.sty}{\from{\jobname.dtx}{package}}
-          \file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}}
 }
+\usedir{tex/latex/chemstyle/config}
 \generate{\file{rsc.jdf}{\from{chemstyle.dtx}{rsc}}
           \file{angew.jdf}{\from{chemstyle.dtx}{angew}}
           \file{tetlett.jdf}{\from{chemstyle.dtx}{tetlett}}
@@ -43,6 +43,9 @@
 }
 \generate{\file{none.jdf}{\from{chemstyle.dtx}{none}}
 }
+\usedir{doc/latex/chemstyle}
+\generate{\file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}}
+}
 \endbatchfile
 \endinput
 %%
diff --git a/Master/texmf-dist/tex/latex/chemstyle/angew.jdf b/Master/texmf-dist/tex/latex/chemstyle/angew.jdf
index 4fa70535899..ef17c69f56c 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/angew.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/angew.jdf
@@ -9,19 +9,20 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
 \ProvidesFile{angew.def}[2007/10/31 v1.1h]
 \captionsetup{labelsep=period,labelfont={bf,it},font=sf,singlelinecheck=off}
 \captionsetup[table]{labelsep=colon}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\relax
-\cst@prefixtrue
-\latinemphoff
-\cst@commafalse
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=false}
 \endinput
 %%
 %% End of file `angew.jdf'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/chemstyle.sty b/Master/texmf-dist/tex/latex/chemstyle/chemstyle.sty
index adeb3d60a91..884adcf0be2 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/chemstyle.sty
+++ b/Master/texmf-dist/tex/latex/chemstyle/chemstyle.sty
@@ -9,119 +9,156 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{chemstyle}
-  [2007/10/31 v1.1h Writing chemistry with style]
-\RequirePackage{graphicx,varioref,caption}
-\let\cst@emph\relax
-\def\cst@hyph{}
-\let\cst@super\relax
-\newif  \ifcst@prefix   \cst@prefixtrue
-\def\cst@radical#1#2{%
-  \expandafter\newcommand\expandafter{\csname #1#2\endcsname}{}%
-  \expandafter\DeclareRobustCommand\expandafter{%
+  [2008/03/08 v1.2 Writing chemistry with style]
+\RequirePackage{xkeyval}
+\@ifpackagelater{xkeyval}{2005/05/07}
+  {}
+  {\PackageError{chemstyle}
+     {xkeyval >= 2.5 required}
+     {chemstyle requires the `xkeyval' package, version 2.5
+       or later.\MessageBreak The version loaded is:
+       `\@nameuse{ver@xkeyval.sty}'.\MessageBreak
+        This is a fatal error: loading will abort.}
+   \endinput}
+\RequirePackage{graphicx,varioref,caption,xspace}
+\newcommand*{\cst@tempa}{}
+\newcommand*{\cst@tempb}{}
+\newcommand*{\cst@boolkey}[1]{
+  \define@boolkey[cst]{opt}[cst@]{#1}[true]{}}
+\cst@boolkey{chemcompounds}
+\cst@boolkey{xspace}
+\cst@boolkey{phrases}
+\cst@boolkey{radprefix}
+\cst@boolkey{rademph}
+\cst@boolkey{radsuper}
+\cst@boolkey{radhyphen}
+\cst@boolkey{abbremph}
+\cst@boolkey{abbrcomma}
+\cst@boolkey{notesbefore}
+\newif\ifcst@notes
+\newif\ifcst@autonotes
+\define@choicekey*[cst]{opt}{notes}[\cst@tempa]
+  {true,false,auto}[true]
+  {\cst@notesfalse
+   \cst@autonotesfalse
+   \edef\cst@tempb{auto}
+   \ifx\cst@tempa\cst@tempb
+     \cst@notestrue
+     \cst@autonotestrue
+   \fi
+   \edef\cst@tempb{true}
+   \ifx\cst@tempa\cst@tempb
+     \cst@notestrue
+   \fi}
+\DeclareOptionX[cst]<opt>{siunits}
+  {\PackageInfo{chemstyle}{Option siunits no longer required}}
+\DeclareOptionX[cst]<opt>{SIunits}
+  {\PackageInfo{chemstyle}{Option siunits no longer required}}
+\DeclareOptionX[cst]<opt>{nonotes}
+  {\ExecuteOptionsX[cst]<opt>{notes=false}}
+\DeclareOptionX[cst]<opt>{nophrases}
+  {\ExecuteOptionsX[cst]<opt>{phrases=false}}
+\define@cmdkeys[cst]{opt}[cst@]{journal,language}
+\DeclareOptionX*{\edef\cst@journal{\CurrentOption}}
+\setkeys[cst]{opt}{
+  notes=true,
+  phrases=true,
+  chemcompounds=true,
+  xspace=true,
+  journal=none,
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=true,
+  abbremph=true,
+  abbrcomma=false,
+  language=english,
+  notesbefore=true}
+\ProcessOptionsX[cst]<opt>
+\ifcst@chemcompounds
+  \PassOptionsToPackage{chemcompounds}{chemscheme}
+\fi
+\RequirePackage{chemscheme}
+\newcommand*{\cst@disablekey}[1]{
+  \define@key[cst]{opt}{#1}{\PackageWarning{chemstyle}
+    {Option `#1' only valid when loading package}}}
+\AtBeginDocument{
+  \cst@disablekey{journal}
+  \cst@disablekey{phrases}
+  \cst@disablekey{nophrases}
+  \cst@disablekey{notes}
+  \cst@disablekey{nonotes}
+  \cst@disablekey{chemcompounds}}
+\newcommand*{\cstsetup}[1]{%
+  \iffalse{\fi\ifnum0=`}\fi
+  \setkeys[cst]{opt}{#1}%
+  \ifnum0=`{\fi\iffalse}\fi}
+\AtBeginDocument{
+  \@ifpackageloaded{si}
+    {\makeatletter
+     \si@requirecfgs{synchem}
+     \makeatother}
+    {\newcommand*{\cmc}{\cubiccentimeter}
+     \newcommand*{\Hz}{\hertz}
+     \@ifpackageloaded{unitsdef}
+       {\newunit{\cubiccentimeter}{\cm\unitsuperscript{3}}
+        \newunit{\Molar}{\textsc{m}}
+        \newunit{\molar}{\mole\unitsep\dm\unitsuperscript{--3}}
+        \newunit{\mmHg}{mmHg}
+        \newunit{\mol}{\mole}}
+       {\@ifpackageloaded{SIunits}{}
+         {\@ifpackageloaded{siunits}{}
+          {\RequirePackage{SIunits}}}
+        \newcommand*{\cubiccentimeter}{\centi\metre\cubed}
+        \newcommand*{\Molar}{\textsc{m}}
+        \newcommand*{\molar}{\mole\usk\deci\metre\rpcubed}
+        \newcommand*{\mmHg}{\milli\metre Hg}
+        \newcommand*{\mol}{\mole}}}}
+\DeclareSymbolFont{CSTAMS}{U}{msb}{m}{n}
+\DeclareMathSymbol{\cst@varnothing}{\mathord}{CSTAMS}{"3F}
+\providecommand*{\standardstate}%
+  {\textsuperscript{\rotatebox[origin=c]{138.8}%
+  {\ensuremath{\cst@varnothing}}}}
+\newcommand*{\cst@radical}[2]{%
+  \expandafter\DeclareRobustCommand\expandafter*\expandafter{%
     \csname #1#2\endcsname}{%
-    \ifcst@prefix
-      \cst@super{\cst@emph{#1}}\cst@hyph#2%
+    \ifcst@radhyphen
+      \def\cst@hyphen{-}%
+    \else
+      \let\cst@hyphen\relax
+    \fi
+    \ifcst@radsuper
+      \let\cst@super\textsuperscript
+    \else
+      \let\cst@super\relax
+    \fi
+    \ifcst@rademph
+      \let\cst@emph\emph
+    \else
+      \let\cst@emph\relax
+    \fi
+    \ifcst@radprefix
+      \cst@super{\cst@emph{#1}}\cst@hyphen#2%
     \else
-      #2\cst@hyph\cst@super{\cst@emph{#1}}%
-    \fi%
-    \cst@xspace
-  }
-}
+      #2\cst@hyphen\cst@super{\cst@emph{#1}}%
+    \fi
+    \cst@xspace}}
+\newcommand*{\cst@xspace}{%
+  \ifcst@xspace
+    \expandafter\xspace%
+  \fi}
 \cst@radical{n}{Pr}%
 \cst@radical{i}{Pr}%
 \cst@radical{n}{Bu}%
 \cst@radical{i}{Bu}%
 \cst@radical{s}{Bu}%
 \cst@radical{t}{Bu}%
-\newif  \ifcst@notes    \cst@notestrue
-\newif  \ifcst@phrases  \cst@phrasestrue
-\newif  \ifcst@si       \cst@sifalse
-\newif  \ifcst@xspace   \cst@xspacefalse
-\DeclareOption{ch}{\ExecuteOptions{chapter}}
-\DeclareOption{chapter}%
-  {\PassOptionsToPackage{chapter}{chemscheme}}
-\DeclareOption{chemcompounds}%
-  {\PassOptionsToPackage{chemcompounds}{chemscheme}}
-\DeclareOption{nonotes}{\cst@notesfalse}
-\DeclareOption{nophrases}{\cst@phrasesfalse}
-\DeclareOption{siunits}{\cst@sitrue}
-\DeclareOption{SIunits}{\cst@sitrue}
-\DeclareOption{xspace}{\cst@xspacetrue}
-\let\cst@option\relax
-\DeclareOption*{%
-  \ifx\cst@option\relax\else
-    \PackageWarning{chemstyle}
-      {Extra option \cst@option\space ignored}
-  \fi
-  \edef\cst@option{\CurrentOption}
-}
-\@ifpackageloaded{SIunits}
-  {\ExecuteOptions{siunits}}
-  {\@ifpackageloaded{siunits}
-    {\ExecuteOptions{siunits}}
-    {}}
-\ProcessOptions*
-\ifcst@si
-  \@ifpackageloaded{unitsdef}
-    {\PackageWarning{chemstyle}{%
-      You have set the SIunits option,\MessageBreak
-      but have already loaded unitsdef!\MessageBreak
-      unitsdef will be used for extra unit macros}
-    \cst@sifalse}
-    {\AtBeginDocument{%
-      \@ifpackageloaded{siunits}%
-        {}
-        {\RequirePackage{SIunits}}%
-      }
-    }
-\else
-  \ifx\fg\@undefined
-  \else
-    \ifx\fg\relax
-    \else
-      \let\cst@fg\fg
-      \let\fg\@undefined
-    \fi
-  \fi
-  \RequirePackage{unitsdef}
-  \ifx\cst@fg\@undefined
-    \let\fg\@undefined
-  \else
-    \let\fg\cst@fg
-  \fi
-  \AtBeginDocument{%
-    \ifx\fg\@undefined
-      \newcommand{\fg}{\femtogram}
-    \fi
-  }
-\fi
-\RequirePackage{chemscheme}
-\ifcst@si
-  \newcommand{\cubiccentimeter}{\centi\metre\cubed}
-  \newcommand{\Molar}{\textsc{m}}
-  \newcommand{\molar}{\mole\usk\deci\metre\rpcubed}
-  \newcommand{\mmHg}{\milli\metre~Hg}
-  \newcommand{\mol}{\mole}
-\else
-  \newunit{\cubiccentimeter}{\cm\unitsuperscript{3}}
-  \newunit{\Molar}{\textsc{m}}
-  \newunit{\molar}{\mole\unitsep\dm\unitsuperscript{--3}}
-  \newunit{\mmHg}{mm\unitsep{}Hg}
-  \newunit{\mol}{\mole}
-\fi
-\newcommand{\cmc}{\cubiccentimeter}
-\newcommand{\Hz}{\hertz}
-\DeclareSymbolFont{CSTAMS}{U}{msb}{m}{n}
-\DeclareMathSymbol{\cst@varnothing}{\mathord}{CSTAMS}{"3F}
-\providecommand*{\standardstate}%
-  {\textsuperscript{\rotatebox[origin=c]{138.8}%
-  {\ensuremath{\cst@varnothing}}}}
 \@ifclassloaded{memoir}
   {\let\newfloat\@undefined
    \RequirePackage{float}}
@@ -135,141 +172,142 @@
 \floatplacement{scheme}{htbp}
 \floatplacement{figure}{htbp}
 \floatcontentscentre
-\AtBeginDocument{%
-  \labelformat{scheme}{\schemename~#1}}
+\labelformat{scheme}{\schemename~#1}
 \labelformat{figure}{\figurename~#1}
 \labelformat{table}{\tablename~#1}
-\let\latinemphon\relax
-\let\latinemphoff\relax
-\let\cst@latin\relax
-\ifcst@phrases
-  \newcommand{\latinemphon}{\let\cst@latin\emph}
-  \newcommand{\latinemphoff}{\let\cst@latin\relax}
-  \AtBeginDocument{%
-    \providecommand\latin{\cst@latin}
-  }
-\fi
-\latinemphon
-\newif  \ifcst@comma    \cst@commafalse
-\AtBeginDocument{%
-  \ifcst@comma
-    \def\cst@punct{.,\cst@xspace}
-    \def\cst@addpunct{%
-      \cst@add@punct\relax%
-    }
-    \def\cst@add@punct#1{%
-      \futurelet\@tempa\cst@add@punct@%
-    }
-    \def\cst@add@punct@{%
-      \ifx\@tempa.%
-        \let\@tempb\cst@add@punct%
-      \else
-        \ifx\@tempa,%
-          \let\@tempb\cst@add@punct%
-        \else
-          \let\@tempb\cst@punct%
-        \fi
-      \fi
-      \@tempb%
-    }
-  \fi
-}
-\ifcst@xspace
-  \RequirePackage{xspace}
-  \let\cst@xspace\xspace
-\else
-  \let\cst@xspace\relax
-\fi
+\newcommand*{\cst@latin}{%
+  \ifcst@abbremph
+    \expandafter\emph%
+  \fi}
+\newcommand*{\latinemphon}{\cstsetup{abbremph=true}}
+\newcommand*{\latinemphoff}{\cstsetup{abbremph=false}}
+\AtBeginDocument{\providecommand*\latin{\cst@latin}}
 \ifcst@phrases
   \AtBeginDocument{
-    \providecommand{\etc}%
+    \providecommand*{\etc}
       {\@ifnextchar.{\cst@etc}{\cst@etc.\cst@xspace}}
-    \providecommand{\invacuo}%
+    \providecommand*{\invacuo}
       {\latin{in vacuo}\cst@xspace}
-    \providecommand{\etal}%
+    \providecommand*{\etal}
       {\@ifnextchar.{\cst@etal}{\cst@etal.\cst@xspace}}
-    \ifcst@comma
-      \providecommand{\eg}%
-        {\cst@eg\cst@addpunct}
-      \providecommand{\ie}%
-        {\cst@ie\cst@addpunct}
+    \providecommand*{\eg}
+      {\ifcst@abbrcomma
+         \expandafter\cst@commaabbr%
+       \else
+         \expandafter\cst@nocommaabbr%
+       \fi
+       {eg}}
+    \providecommand*{\ie}
+      {\ifcst@abbrcomma
+         \expandafter\cst@commaabbr%
+       \else
+         \expandafter\cst@nocommaabbr%
+       \fi
+       {ie}}}
+\newcommand*{\cst@etal}{\latin{et~al}}
+\newcommand*{\cst@etc}{\latin{etc}}
+\newcommand*{\cst@ie}{\latin{i.e\spacefactor999\relax}}
+\newcommand*{\cst@eg}{\latin{e.g\spacefactor999\relax}}
+\newcommand*{\cst@commaabbr}[1]{%
+  \csname cst@#1\endcsname%
+  \cst@addpunct}
+\newcommand*{\cst@nocommaabbr}[1]{%
+  \@ifnextchar.%
+    {\csname cst@#1\endcsname}
+    {\csname cst@#1\endcsname.\cst@xspace}}
+\newcommand*{\cst@addpunct}{%
+  \cst@add@punct\relax}
+\newcommand*{\cst@add@punct}[1]{%
+  \futurelet\cst@tempa\cst@add@punct@}
+\newcommand*{\cst@add@punct@}{%
+  \ifx.\cst@tempa
+    \let\cst@tempb\cst@add@punct
+  \else
+    \ifx,\cst@tempa
+      \let\cst@tempb\cst@add@punct
     \else
-      \providecommand{\eg}%
-        {\@ifnextchar.{\cst@eg}{\cst@eg.\cst@xspace}}
-      \providecommand{\ie}%
-        {\@ifnextchar.{\cst@ie}{\cst@ie.\cst@xspace}}
+      \let\cst@tempb\cst@commapunct
     \fi
-  }
+  \fi
+  \cst@tempb}
+\newcommand*{\cst@commapunct}{.,\cst@xspace}
+\InputIfFileExists{\cst@journal.jdf}
+  {\PackageInfo{chemstyle}
+    {Loaded \cst@journal.jdf}}
+  {\PackageWarning{chemstyle}
+    {Requested style `\cst@journal' does not exist\MessageBreak
+     Loading default style}
+    \InputIfFileExists{none.jdf}{}
+      {\PackageError{chemstyle}{Failed to load none.jdf}
+         {The default journal definition file was not
+          found\MessageBreak This is a core part of chemstyle
+          \MessageBreak Something is wrong with the installation}}}
+\begingroup
+  \@ifundefined{chapter}
+    {\@ifundefined{refname}
+       {\PackageInfo{chemstyle}
+          {No bibliography name command found}
+        \cstsetup{notes=false}}
+       {\gdef\cst@refsec{\refname}}}
+    {\gdef\cst@refsec{\bibname}}
+\endgroup
+\ifcst@autonotes
+  \AtBeginDocument{
+    \@ifpackageloaded{notes2bib}{}
+      {\newcounter{bibnote}}}
 \fi
-\def\cst@etal{\latin{et~al}}
-\def\cst@etc{\latin{etc}}
-\def\cst@ie{\latin{i.e\spacefactor999\relax}}
-\def\cst@eg{\latin{e.g\spacefactor999\relax}}
-\newif  \ifcst@notesbefore  \cst@notesbeforetrue
-\def\cst@name@refs#1#2#3{%
+\newcommand*{\cst@refname}{%
+  \ifcst@notes
+    \ifcst@autonotes
+      \ifnum\the\value{bibnote}>\z@
+        \expandafter\expandafter\expandafter\expandafter\expandafter
+          \expandafter\expandafter\cst@ref@name%
+      \else
+        \expandafter\expandafter\expandafter\expandafter\expandafter
+          \expandafter\expandafter\cst@ref@name@%
+      \fi
+    \else
+      \expandafter\expandafter\expandafter\cst@ref@name%
+    \fi
+  \else
+    \expandafter\cst@ref@name@%
+  \fi}
+\newcommand*{\cst@ref@name}[3]{%
   \ifcst@notesbefore
     #3\space#2\space#1%
   \else
     #1\space#2\space#3%
-  \fi
-}
-\def\cst@language{english}
-\@ifundefined{refname}{%
-  \@ifundefined{bibname}{%
-     \PackageWarning{chemstyle}%
-       {No bibliography name command defined in document class}%
-     \def\cst@namerefs#1#2#3#4{}%
-  }{%
-     \def\cst@refsection{\bibname}%
-  }
-}{%
-   \def\cst@refsection{\refname}%
-}
-\@ifundefined{cst@namerefs}{%
-  \def\cst@namerefs#1#2#3#4{%
-    \ifcst@notes%
-      \def\cst@language@check{#1}
-      \ifx\cst@language\cst@language@check
-        \expandafter\renewcommand\expandafter{\cst@refsection}%
-          {\cst@name@refs{#2}{#3}{#4}}%
-      \fi
-      \AtBeginDocument{%
-        \@ifpackageloaded{babel}{%
-          \expandafter\addto\expandafter{\csname captions#1\endcsname}%
-            {\expandafter\renewcommand\expandafter{\cst@refsection}%
-            {\cst@name@refs{#2}{#3}{#4}}}%
-          \expandafter\selectlanguage\expandafter{\languagename}}
-        {}}
-    \else%
-      \ifx#1\cst@language
-        \expandafter\renewcommand\expandafter{\cst@refsection}{#2}%
-      \fi
-      \AtBeginDocument{%
-        \@ifpackageloaded{babel}{%
-          \expandafter\addto\expandafter{\csname captions#1\endcsname}%
-            {\expandafter\renewcommand\expandafter{\cst@refsection}{#2}}%
-          \expandafter\selectlanguage\expandafter{\languagename}}%
-        {}}
-    \fi%
-  }
-}{}
-\cst@namerefs{english}{References}{and}{Notes}
-\cst@namerefs{UKenglish}{References}{and}{Notes}
-\cst@namerefs{ngerman}{Literatur}{und}{Notizen}
-\cst@namerefs{german}{Literatur}{und}{Notizen}
-\cst@namerefs{french}{R\'ef\'erences}{et}{Notes}
-\cst@namerefs{frenchb}{R\'ef\'erences}{et}{Notes}
-\ifx\cst@option\relax
-  \PackageWarning{chemstyle}
-    {You didn't say which style to use \MessageBreak
-     Defaulting to the ``no change'' style: none}
-  \def\cst@option{none}
-\fi
-\InputIfFileExists{\cst@option.jdf}
-  {\PackageInfo{chemstyle}
-    {Loaded \cst@option.jdf}}
-  {\PackageWarning{chemstyle}
-    {Required style \cst@option\space does not exist}}
+  \fi}
+\newcommand*{\cst@ref@name@}[3]{#1}
+\@ifundefined{cst@refsec}
+  {\let\cst@setrefname\@gobblefour}
+  {\newcommand*{\cst@setrefname}[4]{
+     \edef\cst@tempa{#1}%
+     \ifx\cst@tempa\cst@language
+       \expandafter\renewcommand\expandafter*\expandafter{%
+         \cst@refsec}
+         {\cst@refname{#2}{#3}{#4}}
+     \fi
+     \AtBeginDocument{
+       \@ifpackageloaded{biblatex}
+         {\def\cst@tempa{\csgappto{bib@strings@#1}}
+          \expandafter\cst@tempa\expandafter{\expandafter\renewcommand%
+            \expandafter*\expandafter{\cst@refsec}{%
+              \cst@refname{#2}{#3}{#4}}}}
+         {\@ifpackageloaded{babel}
+           {\def\cst@tempa{\expandafter\addto\expandafter{%
+              \csname captions#1\endcsname}}
+            \expandafter\cst@tempa\expandafter
+              {\expandafter\renewcommand\expandafter*\expandafter%
+                {\cst@refsec}{\cst@refname{#2}{#3}{#4}}}
+            \expandafter\selectlanguage\expandafter{\languagename}}
+           {}}}}}
+\cst@setrefname{english}{References}{and}{Notes}
+\cst@setrefname{UKenglish}{References}{and}{Notes}
+\cst@setrefname{ngerman}{Literatur}{und}{Notizen}
+\cst@setrefname{german}{Literatur}{und}{Notizen}
+\cst@setrefname{french}{R\'ef\'erences}{et}{Notes}
+\cst@setrefname{frenchb}{R\'ef\'erences}{et}{Notes}
 \endinput
 %%
 %% End of file `chemstyle.sty'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/ic.jdf b/Master/texmf-dist/tex/latex/chemstyle/ic.jdf
index 3d0fdc361f7..f9e4ef9981c 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/ic.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/ic.jdf
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
diff --git a/Master/texmf-dist/tex/latex/chemstyle/jacs.jdf b/Master/texmf-dist/tex/latex/chemstyle/jacs.jdf
index a70a8629004..c47daf979cd 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/jacs.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/jacs.jdf
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
@@ -18,16 +18,18 @@
 \captionsetup{labelfont={bf,it,sf},textfont=sf,labelsep=perquad}
 \captionsetup[figure]{textfont=rm}
 \captionsetup{singlelinecheck=off}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=true,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \floatstyle{plaintop}
 \restylefloat{scheme}
 \floatstyle{plain}
-\latinemphoff
 \cst@notesbeforefalse
-\cst@commatrue
 \endinput
 %%
 %% End of file `jacs.jdf'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/jawltxdoc.sty b/Master/texmf-dist/tex/latex/chemstyle/jawltxdoc.sty
index fe7d9ec4135..7c3ece3e6d6 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/jawltxdoc.sty
+++ b/Master/texmf-dist/tex/latex/chemstyle/jawltxdoc.sty
@@ -9,21 +9,22 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{jawltxdoc}
-  [2007/10/14 v1.0b]
 \usepackage[T1]{fontenc}
 \usepackage[english,UKenglish]{babel}
 \usepackage[scaled=0.95]{helvet}
 \usepackage[version=3]{mhchem}
 \usepackage[final]{microtype}
 \usepackage[osf]{mathpazo}
-\usepackage{booktabs,array,url,graphicx,courier,unitsdef}
-\usepackage{upgreek,ifpdf,listings}
+\usepackage{booktabs,array,url,graphicx,courier,xspace}
+\usepackage{upgreek,ifpdf,listings,float,caption,longtable}
+\floatstyle{plaintop}
+\restylefloat{table}
 \ifpdf
   \usepackage{embedfile}
   \embedfile[%
@@ -32,14 +33,15 @@
     desc={LaTeX docstrip source archive for package `\jobname'}%
     ]{\jobname.dtx}
 \fi
-\usepackage{\jobname}
+\IfFileExists{\jobname.sty}
+  {\usepackage{\jobname}}{}
 \usepackage[numbered]{hypdoc}
 \newlength\LaTeXwidth
 \newlength\LaTeXoutdent
 \newlength\LaTeXgap
 \setlength\LaTeXgap{1em}
 \setlength\LaTeXoutdent{-0.15\textwidth}
-\def\typesetexampleandcode{%
+\newcommand*{\typesetexampleandcode}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin\LaTeXoutdent
@@ -56,7 +58,7 @@
     \end{minipage}%
   \end{list}
 }
-\def\typesetcodeandexample{%
+\newcommand*{\typesetcodeandexample}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin{0pt}
@@ -69,7 +71,7 @@
     \lst@sampleInput
   \end{list}
 }
-\def\typesetfloatexample{%
+\newcommand*{\typesetfloatexample}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin{0pt}
@@ -82,7 +84,7 @@
     \end{minipage}%
   \end{list}
 }
-\def\typesetcodeonly{%
+\newcommand*{\typesetcodeonly}{%
   \begin{list}{}{%
     \setlength\itemindent{0pt}
     \setlength\leftmargin{0pt}
@@ -101,22 +103,16 @@
   \let\typesetexample#1
   \global\let\lst@intname\@empty
   \setbox\lst@samplebox=\hbox\bgroup
-  \setkeys{lst}{language=[LaTeX]{TeX},tabsize=4,gobble=2,%
-    breakindent=0pt,basicstyle=\small\ttfamily,basewidth=0.51em,%
-    keywordstyle=\color{blue},%
-    morekeywords={bibnote,citenote,bibnotetext,bibnotemark,%
-      thebibnote,bibnotename,includegraphics,schemeref,%
-      floatcontentsleft,floatcontentsright,floatcontentscentre,%
-      schemerefmarker,compound,schemerefformat,color,%
-      startchemical,stopchemical,chemical,setupchemical,bottext,%
-      listofschemes}}
+  \setkeys{lst}{tabsize=4,gobble=3,breakindent=0pt,%
+    basicstyle=\small\ttfamily,basewidth=0.51em,%
+    keywordstyle=\color{blue}}
   \lst@BeginAlsoWriteFile{\LaTeXexamplefile}
 }{%
   \lst@EndWriteFile\egroup
   \setlength\LaTeXwidth{\wd\lst@samplebox}
   \typesetexample%
 }
-\def\lst@sampleInput{%
+\newcommand*{\lst@sampleInput}{%
   \MakePercentComment\catcode`\^^M=10\relax
   \small%
   {\setkeys{lst}{SelectCharTable=\lst@ReplaceInput{\^\^I}%
@@ -124,7 +120,42 @@
     \leavevmode \input{\LaTeXexamplefile}}%
   \MakePercentIgnore%
 }
-\hyphenation{PDF-LaTeX}
+\def\DescribeOption{\leavevmode\@bsphack\begingroup\MakePrivateLetters
+  \Describe@Option}
+\def\Describe@Option#1{\endgroup
+              \marginpar{\raggedleft\PrintDescribeEnv{#1}}%
+              \SpecialOptionIndex{#1}\@esphack\ignorespaces}
+\def\SpecialOptionIndex#1{\@bsphack
+    \index{#1\actualchar{\protect\ttfamily#1}
+           (option)\encapchar usage}%
+    \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
+           usage}\@esphack}
+\newcommand*{\pkg}[1]{\textsf{#1}}
+\newcommand*{\currpkg}{\pkg{\jobname}\xspace}
+\newcommand*{\opt}[1]{\texttt{#1}}
+\newcommand*{\file}[1]{\texttt{#1}}
+\newcommand*{\ext}[1]{\file{.#1}}
+\newcommand*{\latin}[1]{\emph{#1}}
+\newcommand*{\etc}{%
+  \@ifnextchar.
+    {\latin{etc}}
+    {\latin{etc.}}
+  \xspace}
+\newcommand*{\eg}{%
+  \@ifnextchar.
+    {\latin{e.g}}
+    {\latin{e.g.}}
+  \xspace}
+\newcommand*{\ie}{%
+  \@ifnextchar.
+    {\latin{i.e}}
+    {\latin{i.e.}}
+  \xspace}
+\newcommand*{\AMS}{{\protect\usefont{OMS}{cmsy}{m}{n}%
+  A\kern-.1667em\lower.5ex\hbox{M}\kern-.125emS}}
+\providecommand*{\eTeX}{\ensuremath{\varepsilon}-\TeX}
+\newcommand*{\XeTeX}
+  {X\kern-.125em\lower.5ex\hbox{\reflectbox{E}}\kern-.1667em\TeX}
 \endinput
 %%
 %% End of file `jawltxdoc.sty'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/jomc.jdf b/Master/texmf-dist/tex/latex/chemstyle/jomc.jdf
index 9985dc79340..d61a461c350 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/jomc.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/jomc.jdf
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
@@ -18,12 +18,14 @@
 \captionsetup[table]{labelsep=newline,singlelinecheck=off}
 \AtBeginDocument{%
   \renewcommand{\figurename}{Fig.}}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
-\latinemphoff
-\cst@commafalse
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=true,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=false,
+  notesbefore=true}
 \endinput
 %%
 %% End of file `jomc.jdf'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/jpc.jdf b/Master/texmf-dist/tex/latex/chemstyle/jpc.jdf
index 5d82a728a9e..d7e7488c88f 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/jpc.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/jpc.jdf
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
@@ -18,16 +18,18 @@
 \captionsetup{font=bf,labelsep=colon,format=labelcaps}
 \captionsetup[figure]{format=plain,textfont=md,labelsep=period}
 \captionsetup{singlelinecheck=off}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \floatstyle{plaintop}
 \restylefloat{scheme}
 \floatstyle{plain}
-\latinemphoff
 \cst@notesbeforefalse
-\cst@commatrue
 \endinput
 %%
 %% End of file `jpc.jdf'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/none.jdf b/Master/texmf-dist/tex/latex/chemstyle/none.jdf
index 97835030753..65fadbce374 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/none.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/none.jdf
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
diff --git a/Master/texmf-dist/tex/latex/chemstyle/orglett.jdf b/Master/texmf-dist/tex/latex/chemstyle/orglett.jdf
index bd315db3813..5fb0ff7706e 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/orglett.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/orglett.jdf
@@ -9,14 +9,15 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
 \ProvidesFile{orglett.jdf}[2007/10/31 v1.1h]
 \RequirePackage{xcolor}
 \newcommand*{\OrgLettColour}{purple}
-\newcommand\fs@orglett{\def\@fs@cfont{\bfseries}
+\newcommand*{\fs@orglett}{%
+  \def\@fs@cfont{\bfseries}%
   \let\@fs@capt\floatc@ruled
   \def\@fs@pre{\begingroup\color{\OrgLettColour}
     \hrule height12pt depth0pt \kern2pt\endgroup}%
@@ -24,9 +25,10 @@
   \def\@fs@post{\begingroup\color{\OrgLettColour}\kern2pt
     \hrule height1.5pt depth0pt\endgroup}%
   \let\@fs@iftopcapt\iftrue}
-\newcommand\fs@orglettfig{\def\@fs@cfont{\bfseries}
+\newcommand*{\fs@orglettfig}{%
+  \def\@fs@cfont{\bfseries}%
   \let\@fs@capt\floatc@plain
-  \def\@fs@pre{\begingroup\color{\OrgLettColour}
+  \def\@fs@pre{\begingroup\color{\OrgLettColour}%
     \hrule height12pt depth0pt \kern2pt\endgroup}%
   \def\@fs@mid{\vspace\abovecaptionskip\relax}%
   \def\@fs@post{\begingroup\color{\OrgLettColour}\kern2pt
@@ -39,13 +41,15 @@
 \restylefloat{table}
 \DeclareCaptionLabelSeparator{perquad}{.\quad}
 \captionsetup{labelfont=bf,labelsep=perquad}
-\let\cst@emph\emph
-\def\cst@hyph{}
-\let\cst@super\textsuperscript
-\cst@prefixtrue
-\latinemphoff
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=true,
+  radhyphen=false,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \cst@notesbeforefalse
-\cst@commatrue
 \endinput
 %%
 %% End of file `orglett.jdf'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/rsc.jdf b/Master/texmf-dist/tex/latex/chemstyle/rsc.jdf
index aa9cd1e448f..c75b9b914a7 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/rsc.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/rsc.jdf
@@ -9,7 +9,7 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
@@ -17,12 +17,13 @@
 \AtBeginDocument{%
   \renewcommand{\figurename}{Fig.}}
 \captionsetup{labelsep=quad,labelfont=bf}
-\let\cst@emph\emph
-\def\cst@hyph{-}
-\let\cst@super\relax
-\cst@prefixtrue
-\latinemphon
-\cst@commafalse
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=true,
+  abbremph=true,
+  abbrcomma=false}
 \endinput
 %%
 %% End of file `rsc.jdf'.
diff --git a/Master/texmf-dist/tex/latex/chemstyle/tetlett.jdf b/Master/texmf-dist/tex/latex/chemstyle/tetlett.jdf
index f0e2fe0acb3..9ece588f3bd 100644
--- a/Master/texmf-dist/tex/latex/chemstyle/tetlett.jdf
+++ b/Master/texmf-dist/tex/latex/chemstyle/tetlett.jdf
@@ -9,18 +9,20 @@
 %%  The chemstyle package --- Writing chemistry with style
 %%  Maintained by Joseph Wright
 %%  E-mail: joseph.wright@morningstar2.co.uk
-%%  Released under the LaTeX Project Public License v1.3 or later
+%%  Released under the LaTeX Project Public License v1.3c or later
 %%  See http://www.latex-project.org/lppl.txt
 %%  ----------------------------------------------------------------
 %% 
 \ProvidesFile{tetlett.def}[2007/10/31 v1.1h]
 \captionsetup{labelsep=period,singlelinecheck=off,labelfont=bf}
-\let\cst@emph\emph
-\def\cst@hyph{-}
-\let\cst@super\relax
-\cst@prefixtrue
-\latinemphoff
-\cst@commatrue
+\setkeys[cst]{opt}{
+  radprefix=true,
+  rademph=true,
+  radsuper=false,
+  radhyphen=true,
+  abbremph=false,
+  abbrcomma=true,
+  notesbefore=true}
 \endinput
 %%
 %% End of file `tetlett.jdf'.