path: root/Master/texmf-dist/source/latex/leaflet/leaflet.dtx

% \iffalse meta-comment
%
% Time-stamp: "leaflet.dtx 2004-08-08 10:58:24 CEST Friday hubertjg"
%
%  (c) 1998 J\"urgen Schlegelmilch    <schlegel@informatik.uni-rostock.de>
%  (c) 2000 Walter Schmidt            <w.a.schmidt@gmx.net>
%  (c) 2002/2004 Rolf Niepraschk      <Rolf.Niepraschk@ptb.de> and
%                Hubert G\"a\ss{}lein <HubertJG@open.mind.de>
%
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in:
%
%    http://www.latex-project.org/lppl.txt
%
% and version 1.3 or later is part of all distributions of LaTeX
% version 2003/12/01 or later. 
%
% \fi
%
% \iffalse
%<class>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<class>\ProvidesClass{leaflet}
%<class>  [2004/12/22 v1.0d LaTeX document class (JS,WaS,RN,HjG)]
%
%<*driver|manual>
%<driver>\def\filename{leaflet.dtx}
%<manual>\def\filename{leaflet-manual.tex}
\def\fileversion{v1.0c}   % change this when leaflet-manual changed, too.
\def\filedate{2004/12/22}
\def\docdate {2004/08/12} % change this when leaflet-manual changed, too.
%</driver|manual>
%<*driver>
\listfiles
\errorcontextlines5
\documentclass[a4paper]{ltxdoc}
\IfFileExists{geometry.sty}{%
  \usepackage[left=\marginparwidth,textwidth=1.15\textwidth,%
    top=20mm,bottom=30mm]{geometry}}{}
\IfFileExists{url.sty}{\usepackage{url}}
  {\newcommand\url[1]{\texttt{#1}}}
%\OnlyDescription
%\AlsoImplementation
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\setlength\emergencystretch{3em}
\begin{document}
\DocInput{leaflet.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \changes{v0.8c}{2004/01/16}{Repacked as dtx file. (RN)}
% \changes{v0.9d}{2004/05/29}{M-x delete-trailing-whitespace (HjG)}
% \changes{v0.9d}{2004/05/29}{LPPL 1.3 (HjG)}
% \changes{v0.9d}{2004/05/29}{More code documentation; some caveats. (HjG)}
% \changes{v0.9e}{2004/06/11}{Add option `finish'. (RN/HjG)}
% \changes{v0.9f}{2004/06/25}{Merge v0.9d and v0.9e (hastily). (HjG)}
% \changes{v0.9g}{2004/06/25}{Rename option `finish' to `combine'. (RN/HjG)}
% \changes{v1.0pre1}{2004/06/26}{Redefinition of \cmd{\immediate},
%   \cmd{\write}, \cmd{\openout} and \cmd{\closeout}. (RN)}
% \changes{v1.0pre2}{2004/06/26}{eTeX support. (RN)}
% \changes{v1.0pre3}{2004/07/07}{Options `landscape' and `portait'. (RN)}
% \changes{v1.0}{2004/08/06}{CTAN release. (RN/HjG)}
% \changes{v1.0a}{2004/08/08}{Add option `debug'. (RN)}
%
% \DoNotIndex{\newcommand,\renewcommand,\newenvironment,\renewenvironment}
% \DoNotIndex{\providecommand,\def,\edef,\let,\gdef,\xdef,\global,\newtoks}
% \DoNotIndex{\newif,\newsavebox}
% \DoNotIndex{\RequirePackage,\DeclareOption,\ProcessOptions,\ExecuteOptions}
% \DoNotIndex{\CurrentOption,\OptionNotUsed}
% \DoNotIndex{\LoadClass,\ClassError,\ClassInfo,\ClassWarningNoLine}
% \DoNotIndex{\documentclass,\usepackage,\document}
% \DoNotIndex{\input,\InputIfFileExists,\IfFileExists,\listfiles}
% \DoNotIndex{\@ifdefinable,\@ifundefined,\@percentchar,\@empty}
% \DoNotIndex{\AtBeginDocument,\AtEndDocument,\AtEndOfPackage}
% \DoNotIndex{\MessageBreak,\typeout,\begin,\end,\noindent}
% \DoNotIndex{\wd,\dp,\ht,\par,\@gobble,\g@addto@macro}
% \DoNotIndex{\z@,\z@skip,\p@,\@ne,\tw@,\thr@@,\@iv,\strip@pt,\@plus}
% ^^A ,\@cclv
% \DoNotIndex{\the,\if,\else,\or,\fi,\ifnum,\ifdim,\ifcase,\ifodd}
% \DoNotIndex{\advance,\multiply,\divide}
% \DoNotIndex{\addtolength,\setlength,\usebox,\setbox,\box,\hbox,\vbox,\hb@xt@}
% \DoNotIndex{\usecounter,\setcounter,\undefined,\@undefined,\loop,\repeat}
% \DoNotIndex{\vspace,\hspace,\vfill,\hfill,\put,\string}
% \DoNotIndex{\csname,\endcsname,\begingroup,\endgroup,\@nameuse}
% \DoNotIndex{\expandafter,\afterassignment,\aftergroup,\noexpand}
% \DoNotIndex{\@tempdima,\@tempdimb,\@tempdimc,\@tempcnta,\@tempcntb}
% \DoNotIndex{\@tempboxa,\@temptokena,\toks@,\mbox,\makebox}
% \DoNotIndex{\reserved@a,\relax,\protect,\space,\@spaces}
% \DoNotIndex{\romannumeral,\Roman,\section,\subsection,\tableofcontents}
% \DoNotIndex{\if@tempswa,\@tempswatrue,\@tempswafalse,\if,\ifx,\@ifstar}
% \DoNotIndex{\bfseries,\normalfont,\normalsize,\small,\large,\Huge}
% \DoNotIndex{\parindent,\parskip,\parsep,\clearpage,\newpage,\thanks,\title}
%
% \DoNotIndex{\TEXT,\author,\maketitle}
%
% \title{The \textsf{leaflet} document class}
%
% \author{\makebox[.25\textwidth][r]{J\"urgen Schlegelmilch} \and
%         Hubert G\"a\ss{}lein \and
%         \makebox[.25\textwidth][l]{Rolf Niepraschk} \and
%         Walter Schmidt}
%
% \date{\filedate}
%
% \maketitle
%
% \tableofcontents
%
% \section{Usage}
% Process the file |leaflet-manual.tex| with \LaTeX\ to see
% details of usage and layout.
%
% \StopEventually{\PrintChanges\PrintIndex}
%
%
% \section{Implementation}
%
%    \begin{macrocode}
%<*class>
%    \end{macrocode}
%
% \subsection{Saving some internal macros\dots}
%
%    \begin{macrocode}
\let\LL@shipout\shipout \let\LL@outputpage\@outputpage
\let\LL@begindvi\@begindvi \let\LL@@end\@@end
%    \end{macrocode}
% \subsection{Option processing}
%
% \changes{v1.0b}{2004/08/12}{New option
%    \texttt{nospecialtricks} for testing purposes. (RN)}
%    \begin{macrocode}
\@ifundefined{iflandscape}{\newif\iflandscape}{}%
\@ifundefined{iftumble}{\newif\iftumble}{}%
\newcommand\LL@debug@info[1]{}%
\DeclareOption{dvips}{\PassOptionsToPackage{\CurrentOption}{graphics}}
\DeclareOption{pdftex}{\PassOptionsToPackage{\CurrentOption}{graphics}}
\DeclareOption{vtex}{\PassOptionsToPackage{\CurrentOption}{graphics}}
\DeclareOption{dvipdfm}{\PassOptionsToPackage{\CurrentOption}{graphics}}
\DeclareOption{twoside}{\OptionNotUsed}
\DeclareOption{twocolumn}{\OptionNotUsed}
\DeclareOption{landscape}{\landscapetrue}
\DeclareOption{portrait}{\landscapefalse}
\DeclareOption{debug}{\let\LL@debug@info\typeout}
\DeclareOption{nospecialtricks}{%
  \AtEndOfClass{%
    \ifLL@combine
      \let\immediate\@@@immediate\let\write\@@@write
      \let\openout\@@@openout\let\closeout\@@@closeout
      \let\special\@@@special\let\@@@exec@outs\relax
    \fi}}
%    \end{macrocode}
%  \begin{macro}{\LL@setPaperSize}
% Some paper sizes are not supported by the article class.
% Hence this work-around.
% These page dimensions \emph{must} be given in landscape orientation!
%    \begin{macrocode}
\newcommand*\LL@setPaperSize{}
\DeclareOption{a3paper}{\def\LL@setPaperSize{%
  \paperwidth=420mm\paperheight=297mm\relax}}%
\@ifdefinable\ifLL@combine{\newif\ifLL@combine}
\DeclareOption{combine}{\LL@combinetrue}
\DeclareOption{nocombine}{\LL@combinefalse}
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\LL@selectOutput}
%    \begin{macrocode}
\newcommand*\LL@selectOutput{}
\DeclareOption{frontside}{\def\LL@selectOutput#1#2{#1}}
\DeclareOption{backside}{\def\LL@selectOutput#1#2{#2}}
\DeclareOption{bothsides}{\def\LL@selectOutput#1#2{#1#2}}
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
\DeclareOption{tumble}{\tumbletrue}
\DeclareOption{notumble}{\tumblefalse}
%    \end{macrocode}
%  \begin{macro}{\LL@foldmark}
%  Drawing code for the fold mark.
% (Will be called within a |picture| environment.)
%    \begin{macrocode}
\newcommand*\LL@foldmark{}
\DeclareOption{foldmark}{%
  \def\LL@foldmark{%
    \begingroup
      \linethickness{\LenToUnit{\foldmarkrule}}%
      \setlength\@tempdima{\paperheight-\LL@tmargin}%
      \put(0,\LenToUnit{\@tempdima}){%
        \line(0,-1){\LenToUnit{\foldmarklength}}}%
    \endgroup}%
}
%    \end{macrocode}
% \changes{v1.0d}{2004/12/22}{Invalid code for option ``nofoldmark'' 
% changed. Thanks to Una Smith |<una.smith@att.net>|. (RN)}
%    \begin{macrocode} 
\DeclareOption{nofoldmark}{\def\LL@foldmark{}}%
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
\newcommand*\LL@toomanypages[2]{}
\DeclareOption{draft}{\PassOptionsToClass{\CurrentOption}{article}%
  \AtEndOfClass{%
    \def\LL@toomanypages#1#2{%
        \ClassWarningNoLine{leaflet}{#1.\MessageBreak#2}}%
  }%
}
\DeclareOption{final}{\PassOptionsToClass{\CurrentOption}{article}%
  \AtEndOfClass{%
    \ifLL@combine
      \def\LL@toomanypages#1#2{%
        \ClassError{leaflet}{#1}{#2.}}%
    \else
      \def\LL@toomanypages#1#2{%
        \ClassWarningNoLine{leaflet}{#1.\MessageBreak#2}}%
    \fi
  }%
}
\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
\PassOptionsToClass{landscape,a4paper}{article}
\ExecuteOptions{tumble,foldmark,bothsides,combine,landscape,final}
\ProcessOptions\relax
\ifLL@combine
%    \end{macrocode}
%  \begin{macro}{\LL@rotate@I}
%  \begin{macro}{\LL@rotate@II}
% Rotates the output pages.
%    \begin{macrocode}
  \newcommand*\LL@rotate@I{}\newcommand*\LL@rotate@II{}%
  \iflandscape
    \def\LL@rotate@I#1{#1}%
    \iftumble
      \def\LL@rotate@II#1{\rotatebox[origin=c]{180}{#1}}%
    \else
      \def\LL@rotate@II#1{#1}%
    \fi
  \else
    \def\LL@rotate@I#1{\rotatebox[origin=c]{90}{#1}}%
    \iftumble
      \def\LL@rotate@II#1{\rotatebox[origin=c]{270}{#1}}%
    \else
      \def\LL@rotate@II#1{\rotatebox[origin=c]{90}{#1}}%
    \fi
  \fi
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%  \begin{macro}{\immediate}
%  \begin{macro}{\write}
%  \begin{macro}{\openout}
%  \begin{macro}{\closeout}
% Im Folgenden definieren wir die \TeX{} primitives \cmd{\immediate},
% \cmd{\write}, \cmd{\openout} und \cmd{\closeout} um. Alle nicht 
% ``immediate'' ausgef\"uhrten Anweisungen werden dem Makro 
% \cmd{\@@@pending@outs} (Kommaliste) hinzugef\"ugt. So k\"onnen speziell die
% \cmd{\write}-Anweisungen unabh\"angig von \TeX's \cmd{\shipout} 
% zu einem g\"unstigen Zeitpunkt ausgef\"uhrt werden. For V\TeX\ we 
% must keep in mind that \cmd{\immediate}\cmd{\special} exist.
% \changes{v1.0b}{2004/08/12}{\cmd{\special} must be processed similar 
% to e.\,g. \cmd{\write} (V\TeX). (RN)}
%    \begin{macrocode}
  \def\@@@pending@outs{}\let\@@@immediate\immediate 
  \let\@@@write\write \let\@@@special\special
  \let\@@@openout\openout \let\@@@closeout\closeout
  \def\immediate{%
    \let\write\immediate@write%
    \let\openout\immediate@openout%
    \let\closeout\immediate@closeout%
    \let\special\immediate@special}%
  \def\reset@immediate{%
    \let\write\pending@write%
    \let\openout\pending@openout%
    \let\closeout\pending@closeout%
    \let\special\@@@special}%
  \long\def\pending@write#1#{\pending@@write{#1}}
  \def\immediate@write{%
    \reset@immediate\@@@immediate\@@@write}%
  \def\immediate@openout{%
    \reset@immediate\@@@immediate\@@@openout}%
  \def\immediate@closeout{%
    \reset@immediate\@@@immediate\@@@closeout}%
  \def\immediate@special{%
    \reset@immediate\@@@immediate\@@@special}%
  \let\write\pending@write
  \let\openout\pending@openout
  \let\closeout\pending@closeout
%    \end{macrocode}
%  \begin{macro}{\@dummy@whatsit}
% Makes our redefined primitives more like ``whatsits'' (???). 
% `\cmd{\special}|{}|' is also possible for pdf\TeX\ but we get a lot of 
% strange warnings (``|Non-PDF special ignored!|'') in this case.
%    \begin{macrocode}
  \def\@dummy@whatsit{\special{}}
  \begingroup\@ifundefined{pdfoutput}%
  {\endgroup}
  {\endgroup
   \ifnum\pdfoutput>\z@\def\@dummy@whatsit{\pdfliteral{}}\fi}
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
  \begingroup\expandafter\expandafter\expandafter\endgroup
  \expandafter\ifx\csname eTeXversion\endcsname\relax
    %%% Test is from Markus Kohm (d.c.t.t, 29 Jun 2004)
    \ClassWarningNoLine{leaflet}{%
    *************************************\MessageBreak
    * It's very recommended to use eTeX  \MessageBreak
    * with this package!                 \MessageBreak
    *************************************}%
%    \end{macrocode}
%  \begin{macro}{\pending@@write}
% Doesn't work correctly without any \cmd{\mark} or \cmd{\special}
% or \cmd{\pdfliteral} command inside.
%    \begin{macrocode}
    \long\def\pending@@write#1#2{%
      \@dummy@whatsit
      \g@addto@macro\@@@pending@outs{\@@@immediate\@@@write\number#1{#2},}}%
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\pending@openout}
%    \begin{macrocode}
    \def\pending@openout#1 {%
      \@dummy@whatsit
      \g@addto@macro\@@@pending@outs{\@@@immediate\@@@openout\number#1,}}%
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\pending@closeout}
%    \begin{macrocode}
    \def\pending@closeout#1{%
      \@dummy@whatsit
      \g@addto@macro\@@@pending@outs{\@@@immediate\@@@closeout\number#1,}}%
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\@@@exec@outs}
% Note to this implementation: The out commands and the page breaks are not 
% allways in sync, which means possible wrong page references.
%    \begin{macrocode}
    \newcommand*\@@@exec@outs{% 
      \@@@pending@outs\gdef\@@@pending@outs{}%
      \LL@debug@info{%
        >>> execute the output commands of the current page <<<}}%
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
  \else
    \RequirePackage{etex}
%    \end{macrocode}
% Allocation of a new mark class.
%    \begin{macrocode}
    \globmarks\@@@out@mark
    \newcounter{@@total@outs}\setcounter{@@total@outs}{0}
    \newcounter{@@last@exec}\setcounter{@@last@exec}{0}
%    \end{macrocode}
%  \begin{macro}{\pending@@write}
% Doesn't work correctly without any \cmd{\mark} or \cmd{\special}
% or \cmd{\pdfliteral} command inside.
%    \begin{macrocode}
  \long\def\pending@@write#1#2{%
    \global\advance\c@@@total@outs\@ne%
    \marks\@@@out@mark{\the\c@@@total@outs}%
    \g@addto@macro\@@@pending@outs{\@@@immediate\@@@write\number#1{#2},}}%
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\pending@openout}
%  \begin{macro}{\pending@@openout}
%  \begin{macro}{\pending@@@openout}
%  \begin{macro}{\@ifequalsign}
%    \begin{macrocode}
\def\pending@openout#1 {%
  \global\advance\c@@@total@outs\@ne%
  \marks\@@@out@mark{\the\c@@@total@outs}% 
  \g@addto@macro\@@@pending@outs{\@@@immediate\@@@openout\number#1,}}%
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%  \end{macro}
%  \end{macro}
%  \begin{macro}{\pending@closeout}
%    \begin{macrocode}
\def\pending@closeout#1{%
  \global\advance\c@@@total@outs\@ne%
  \marks\@@@out@mark{\the\c@@@total@outs}% 
  \g@addto@macro\@@@pending@outs{\@@@immediate\@@@closeout\number#1,}}%
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\@@@exec@outs}
% With the call of \cmd{\@@@exec@outs} we simulate \TeX's
% execution of non-immediate output commands. The number of pending 
% commands which can be executed must be decremented by 
% $\cmd{\value}|{@@total@outs}| - \cmd{\botmarks}\cmd{\@@@out@mark}$. The 
% remaining commands must still wait until the next output page is 
% ready. It works only for output commands in the main text which moved to 
% the next page but not for floating output commands.
%    \begin{macrocode}
    \newcommand*\@@@exec@outs{% 
      \begingroup
%    \end{macrocode}
% Pending io's $=\cmd{\@tempcntb} = \mbox{TOTAL-OUTS}\,-\,\mbox{LAST-EXEC}$
%    \begin{macrocode}
        \@tempcntb\c@@@total@outs\advance\@tempcntb-\c@@@last@exec%
        \edef\reserved@a{\botmarks\@@@out@mark}%
        \ifx\reserved@a\@empty\@tempcnta\z@\else\@tempcnta\reserved@a\fi%
        \LL@debug@info{PENDING-OUTS:\the\@tempcntb\space\space
                       TOTAL-OUTS:\the\c@@@total@outs\space\space
                       LAST-EXEC:\the\c@@@last@exec\space\space
                       TOPMARK:\topmarks\@@@out@mark\space\space
                       FIRSTMARK:\firstmarks\@@@out@mark\space\space
                       BOTMARK:\botmarks\@@@out@mark}%
%    \end{macrocode}
% Last valid pending entry $ = \cmd{\@tempcntb} = 
%   \mbox{PENDING-OUTS}\,-\,\mbox{TOTAL-OUTS}\,+\,\mbox{BOTMARK} $
%   \par\noindent
% Number of invalid (moved) out's $ = \cmd{\@tempcnta} = 
%   \mbox{TOTAL-OUTS}\,-\,\mbox{BOTMARK} $
%    \begin{macrocode}
        \advance\@tempcnta-\c@@@total@outs \advance\@tempcntb\@tempcnta 
        \@tempcnta-\@tempcnta%
        \ifnum\@tempcnta>\z@
          \LL@debug@info{%
            >>> resave \the\@tempcnta\space output command(s).
                Too early to execute! <<<}%
        \fi
        \@tempcnta\z@ \def\reserved@b{}%
        \@for\reserved@a :=\@@@pending@outs\do{%
          \ifx\reserved@a\@empty\else
            \ifnum\@tempcnta<\@tempcntb%
              \reserved@a%  execute output's related to the current page box.
              \global\advance\c@@@last@exec\@ne
              \LL@debug@info{>>> execute output command number 
                       \the\c@@@last@exec\space<<<}%
            \else
%    \end{macrocode}            
% Other output's must be resaved and still pending.
%    \begin{macrocode} 
              \expandafter\g@addto@macro\expandafter\reserved@b\expandafter{%
                \reserved@a,}%
            \fi
            \advance\@tempcnta\@ne%
          \fi}%
        \expandafter\@temptokena\expandafter{\reserved@b}%
        \xdef\@@@pending@outs{\the\@temptokena}%
      \endgroup}%
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
  \fi% end of eTeX test.
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%  \end{macro}
%  \end{macro}
%  \begin{macro}{\protected@write}
%  Because our redefined \cmd{\write} is expandable we must protect
%  it inside of \LaTeX's \cmd{\protected@write}.
%    \begin{macrocode}
  \long\def\protected@write#1#2#3{%
    \begingroup
       \let\thepage\relax
       #2%
       \let\protect\@unexpandable@protect
       \edef\reserved@a{\noexpand\write#1{#3}}%
       \reserved@a%
    \endgroup
    \if@nobreak\ifvmode\nobreak\fi\fi}%
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\shipout}
%  We make \LaTeX's \cmd{\shipout} inefficacious (no more shipout at
%  all). 
%    \begin{macrocode}
  \def\shipout{\deadcycles\z@\setbox\@tempboxa=}
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\@begindvi}
%  Delay \cmd{\@begindvi} to be executed until the real page output.
%    \begin{macrocode}
  \let\@begindvi\@empty
\fi% end of \ifLL@combine
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\LL@toomanypages}
%  Now elsewhere \dots
%  \end{macro}
%    \begin{macrocode}
\LoadClass{article}
\RequirePackage{everyshi,calc,graphicx}
%    \end{macrocode}
%  \begin{macro}{\LL@pagesize@specials}
% Now the graphics driver is known.
% We will Check the graphics driver and set special code for page 
% dimensions and other.
%    \begin{macrocode}
\newcommand*\LL@pagesize@specials[2]{}
\@ifundefined{Gin@driver}{}%
{%
  \ifx\Gin@driver\@empty\else%
    \filename@parse{\Gin@driver}\@tempswafalse%
    \def\reserved@a{dvips}%
    \ifx\filename@base\reserved@a\@tempswatrue\fi%
    \def\reserved@a{dvipdfm}%
    \ifx\filename@base\reserved@a\@tempswatrue\fi%
    \if@tempswa%
      \ClassInfo{leaflet}{Generating code for dvips}%
      \def\LL@pagesize@specials#1#2{%
        \@tempdima=#1\@tempdimb=#2%
        \AtBeginDvi{\special{papersize=\the\@tempdima,\the\@tempdimb}}}%
    \fi%
    \def\reserved@a{pdftex}%
    \ifx\filename@base\reserved@a
      \ClassInfo{leaflet}{Generating code for pdfTeX}%
      \def\LL@pagesize@specials#1#2{%
        \@tempdima=#1\@tempdimb=#2%
        \pdfpagewidth\@tempdima\pdfpageheight\@tempdimb}%
    \fi%
    \def\reserved@a{vtex}%
    \ifx\filename@base\reserved@a
      \ClassInfo{leaflet}{Generating code for VTeX}%
      \def\LL@pagesize@specials#1#2{%
        \@tempdima=#1\@tempdimb=#2%
        \mediawidth\@tempdima\mediaheight\@tempdimb}%
    \fi%
  \fi
}
%    \end{macrocode}
%  \end{macro}
%  
%  \begin{macro}{\LL@CmdIgnored}
%    \begin{macrocode}
\newcommand*\LL@CmdIgnored[1]{%
  \ClassWarning{leaflet}{%
    `\string#1' ignored}}
%    \end{macrocode}
%  \end{macro}
% \subsection{Changing the class properties}
%    \begin{macrocode}
\setlength{\parskip}{1ex plus 2pt}
\@listi%
\setlength{\labelwidth}{\leftmargin}
\addtolength{\labelwidth}{-\labelsep}
\pagestyle{empty}
\headheight\z@
\headsep\z@
\footskip\z@
\marginparwidth\z@
\marginparsep\z@
\sloppy
\setcounter{secnumdepth}{0}
%\renewcommand\marginpar[2][]{\LL@CmdIgnored{\marginpar}}
\renewcommand\twocolumn[1][]{\LL@CmdIgnored{\twocolumn}}
\renewcommand\onecolumn{\LL@CmdIgnored{\onecolumn}}
\renewcommand\topfraction{0.7}
\renewcommand\bottomfraction{0.7}
\setlength{\textfloatsep}{10pt plus 4pt minus 3pt}
\setlength{\parindent}{\z@}
\setlength{\leftmargini}{1.5em}
\setlength{\leftmarginii}{1.5em}
\setlength{\leftmarginiii}{1.5em}
\setlength{\leftmarginiv}{1.5em}
\setlength{\leftmarginv}{1.5em}
\setlength{\leftmarginvi}{1.5em}
\setlength{\labelsep}{.5em}
\setlength  \labelwidth{\leftmargini}
\addtolength\labelwidth{-\labelsep}
%    \end{macrocode}
%  \begin{macro}{\noparskip}
%    \begin{macrocode}
\def\noparskip{\par\vspace{-\parskip}}
%    \end{macrocode}
%  \end{macro}
%  Modification of list and section parameters for a more compact layout.
%    \begin{macrocode}
\let\old@small\small
\renewcommand{\small}{\old@small\let\@listi\@listI}
\let\old@footnotesize\footnotesize
\renewcommand{\footnotesize}{\old@footnotesize\let\@listi\@listI}
%    \end{macrocode}
%  \begin{macro}{\sectfont}
% User macro for changing the font of the typesetted parameter of 
% the \cmd{\?section} commands.
%    \begin{macrocode}
\newcommand{\sectfont}{\bfseries}
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
\renewcommand\section{\@startsection{section}{1}{\z@}%
  {-3.5ex \@plus -.75ex}%
  {1ex} %{1.5ex}%
  {\normalfont\large\sectfont}}
\renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
  {-2.5ex plus -.5ex}%
  {1\p@} %{1ex}%
  {\normalfont\normalsize\sectfont}}
\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
  {-2.5ex plus -.5ex}%
  {-1em}%
  {\normalfont\normalsize\sectfont}}
\def\part{\LL@CmdIgnored{\part}\secdef\@part\@spart}
\def\@part[#1]#2{}
\def\@spart#1{}

\renewcommand*\descriptionlabel[1]{%
  \hspace\labelsep\normalfont\descfont #1}
%    \end{macrocode}
%  \begin{macro}{\descfont}
% User macro for changing the font of the description label.
%    \begin{macrocode}
\newcommand*\descfont{\bfseries}
%    \end{macrocode}
%  \end{macro}
%    \begin{macrocode}
\iffalse
% Doesn't work!
\g@addto@macro\enumerate{\parsep2\p@\@plus2\p@\@minus\z@}
\g@addto@macro\itemize{\parsep2\p@\@plus2\p@\@minus\z@}
\g@addto@macro\description{\parsep2\p@\@plus2\p@\@minus\z@}
\else
\newcommand*\LL@listsetup{%
%  \parsep.445ex\@plus.445ex\@minus.2225ex%
%  \parsep.5ex\@plus.5ex\@minus.25ex%
  \parsep1ex\@plus.5ex\@minus.25ex%
  \LL@debug@info{***parsep=\the\parsep}%
%  \itemsep.25\parsep
  \itemsep\z@
  \LL@debug@info{***itemsep=\the\itemsep}%
  \topsep\z@
  \LL@debug@info{***topsep=\the\topsep}%
%  \partopsep\z@
  \LL@debug@info{***partopsep=\the\partopsep}%
}
\def\enumerate{%
  \ifnum \@enumdepth >\thr@@\@toodeep\else
    \advance\@enumdepth\@ne
    \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
    \expandafter
    \list
      \csname label\@enumctr\endcsname
      {\usecounter\@enumctr
        \def\makelabel##1{\hss\llap{##1}}%
        %\def\makelabel##1{##1\hfill}%
        %\def\makelabel##1{\hss##1}%
        \LL@listsetup
      }%
  \fi}
\def\itemize{%
  \ifnum \@itemdepth >\thr@@\@toodeep\else
    \advance\@itemdepth\@ne
    \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
    \expandafter
    \list
      \csname\@itemitem\endcsname
      {%
        \def\makelabel##1{\hss\llap{##1}}%
        %\def\makelabel##1{##1\hfill}%
        %\def\makelabel##1{\hss##1}%
        \LL@listsetup
      }%
  \fi}
\renewenvironment{description}
               {\list{}{\labelwidth\z@ \itemindent-\leftmargin
                        \let\makelabel\descriptionlabel
                        \LL@listsetup}}
               {\endlist}
\fi
%    \end{macrocode}
%
% \subsection{Changing the page dimensions}
%
% \begin{macro}{\setmargins}
% User command to specify the margins. (o, u, l, r)
%
% |\setmargins|\marg{top}\marg{bottom}\marg{left}\marg{right}
%
% The new user interface!
% By default, the \textsf{leaflet} class does not use headings,
% footings and marginal notes.
% If the user desires, these can be restored by setting the respective
% lengths \emph{before} calling |\setmargins|.
% Setting the margins should \emph{always} be done using |\setmargins|;
% if the user assigns to any of the length registers |\topmargin|,
% |\evensidemargin|, |\oddsidemargin| using |\setlength|, chaos will
% happen.
% 
%    \begin{macrocode}
\newcommand*\setmargins[4]{%
%    \end{macrocode}
% temp. top!
%    \begin{macrocode}
   \setlength\topmargin{#1}%
   \edef\LL@tmargin{\the\topmargin}%
%    \end{macrocode}
% temp. bottom!
%    \begin{macrocode}
   \setlength\evensidemargin{#2}% 
   \setlength\textheight{%
     \paperheight-\topmargin-\evensidemargin%
     -\headheight-\headsep-\footskip}%
%    \end{macrocode}
% temp. left!
%    \begin{macrocode}
   \setlength\oddsidemargin{#3}% 
%    \end{macrocode}
% temp. right!
%    \begin{macrocode}
   \setlength\evensidemargin{#4}% 
   \setlength\textwidth{%
     \paperwidth-\oddsidemargin-\evensidemargin-\marginparwidth-\marginparsep}%
%    \end{macrocode}
% real top!
%    \begin{macrocode}
   \addtolength\topmargin{-1in}%
%    \end{macrocode}
% real left!
%    \begin{macrocode}
   \addtolength\oddsidemargin{-1in}%
%    \end{macrocode}
%  probably not necessary
%    \begin{macrocode}
   \evensidemargin\oddsidemargin%
}
%    \end{macrocode}
%  \end{macro}
% The dimensions of a single small page.
%    \begin{macrocode}
\LL@setPaperSize
\paperwidth=0.333333334\paperwidth
\setmargins{11mm}{11mm}{8mm}{8mm}
%    \end{macrocode}
%
% \subsection{Additional user macros}
%
% \begin{macro}{\foldmarkrule}
% \begin{macro}{\foldmarklength}
% The dimension of the foldmark between page~2 and page~3.
%    \begin{macrocode}
\newcommand*\foldmarkrule{0.4pt}
\newcommand*\foldmarklength{2mm}
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%  \begin{macro}{\AddToBackground}
%  \begin{macro}{\AddToBackground*}
%  Adds the given parameter~|#2| (some picture commands) to a
%  macro which will be used inside a zero-dimensional picture environment
%  located at the lower left corner of a page. Parameter~|#1|
%  selects the page number. The star version adds the picture commands to the 
%  background of one of the combined large pages instead of one of the small 
%  pages.
%    \begin{macrocode}
\newcommand\AddToBackground{%
  \@ifstar{\@tempswatrue\LL@AddToBackground}
          {\@tempswafalse\LL@AddToBackground}}
\@onlypreamble\AddToBackground
\newcommand\LL@AddToBackground[2]{%
  \if@tempswa\def\@tempa{LL@largePic}\else\def\@tempa{LL@smallPic}\fi
  \expandafter\providecommand\csname\@tempa\@Roman{#1}\endcsname{}%
  \expandafter\g@addto@macro\csname\@tempa\@Roman{#1}\endcsname{#2}}
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
% \begin{macro}{\LenToUnit}
% \changes{v1.0a}{2004/08/08}{New macro \cmd{\LenToUnit}. (RN)}
% \cmd{\LenToUnit}\marg{dimension} can be used in a 
% |picture| environment instead of multiples of \cmd{\unitlength}.
%    \begin{macrocode}
\newcommand\LenToUnit[1]{#1\@gobble}
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\CutLine}
%  \begin{macro}{\CutLine*}
%  \begin{macro}{\Scissors}
% Adds a dotted line with two scissors on the left side of the page given as
% parameter |#1|.
% The starred version draws only the dotted line.
%    \begin{macrocode}
\newcommand*\CutLine{%
  \@ifstar{\@tempswatrue\LL@CutLine}{\@tempswafalse\LL@CutLine}}
\@onlypreamble\CutLine
\newcommand*\LL@CutLine[1]{%
  \ifLL@combine
    \ifx\Scissors\@empty\@tempswatrue\fi
    \if@tempswa
      \AddToBackground{#1}{%
        \put(0,0){%
          \rotatebox{90}{\makebox(\LenToUnit{\paperheight},0){%
            \normalsize
            \dotfill}}}}%
    \else
      \AddToBackground{#1}{%
        \put(0,0){%
          \rotatebox{90}{\makebox(\LenToUnit{\paperheight},0){%
            \normalsize
            \dotfill\Scissors\dotfill\dotfill\Scissors\dotfill}}}}%
    \fi
  \fi}
\IfFileExists{pifont.sty}
  {\RequirePackage{pifont}%
   \newcommand*\Scissors{\raisebox{-0.85ex}{\large\ding{34}}}}%
  {\newcommand*\Scissors{}}
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%  \end{macro}
%  Adds the fold mark code between page~2 and page~3.
%    \begin{macrocode}
\AddToBackground{3}{\LL@foldmark}
%    \end{macrocode}
%
% \subsection{Page construction and output}
%
% \subsubsection{Intercepting the small pages}
%
%  \begin{macro}{\vb@xt@}
%  Similar to \cmd{\hb@xt@} (should be part of the \LaTeX\ kernel).
%    \begin{macrocode}
\providecommand*\vb@xt@{\vbox to}
%    \end{macrocode}
%  \end{macro}
%  We use our own page saving macro instead of real \LaTeX\ output.
%    \begin{macrocode}
\AtBeginDocument{\EveryShipout{\LL@savePage}}
%    \end{macrocode}
%  \begin{macro}{LL@page}
% A counter for the small pages (absolute counting).
%    \begin{macrocode}
\newcounter{LL@page}\setcounter{LL@page}{1}
\newcommand\LL@tempa{}
%    \end{macrocode}
%  \end{macro}
%  \begin{macro}{\LL@savePage}
% With ``combine'' option the six small pages will be saved in box registers
% (\cmd{\LL@boxI}\dots \cmd{\LL@boxVI}).
% The box255 with the page content must be a bit moved to get a
% ``normal-sized'' box. 
%    \begin{macrocode}
\newcommand*\LL@savePage{%
  \ifnum\c@LL@page<7\relax
%    \end{macrocode}  
% Add a background picture to a single small page. 
%    \begin{macrocode}
    \setbox\@cclv\vbox{%
      \vbox{\@tempdima=1in\relax
        \@tempdimb=\paperheight\advance\@tempdimb-\@tempdima
        \pictur@(0,0)(\LenToUnit{\@tempdima},\LenToUnit{\@tempdimb})%
          \begingroup
          \set@typeset@protect
          \@nameuse{LL@smallPic\Roman{LL@page}}%
          %\set@display@protect
          \endgroup
        \endpicture}%
        \nointerlineskip\box\@cclv}%
    \ifLL@combine
      \@@@exec@outs
      \expandafter\newsavebox\csname LL@box\Roman{LL@page}\endcsname%
      \setbox\@cclv=\vbox{\vskip1in\unvbox\@cclv}%
      \setbox\@cclv=\vbox{\moveright1in\box\@cclv}%
      \setbox\@cclv=\hb@xt@\paperwidth{\box\@cclv\hss}%
      \setbox\@cclv=\vb@xt@\paperheight{\box\@cclv\vss}%
      \global\expandafter\setbox%
        \csname LL@box\Roman{LL@page}\endcsname=\box\@cclv%
      \typeout{\@spaces[\the\c@LL@page] ==> [\Roman{LL@page}]}%
    \fi
  \fi
  \ifnum\c@LL@page=7\relax
%    \end{macrocode}
% Make this an error or warning message, depending on class option.
% (|-->| warning in all cases?)
%    \begin{macrocode}
    \begingroup
      \set@typeset@protect
      \LL@toomanypages{%
        The text you supplied fills more than six pages\MessageBreak
        and will therefore not fit onto a single flyer}{%
        Try using smaller fonts or reducing vertical space}%
    \endgroup
  \fi
  \stepcounter{LL@page}}
%    \end{macrocode}
%  \end{macro}
%
% \subsubsection{Generating missing small pages}
%
% NOTE TO OURSELVES:
%  All the following must be done if the document code is already
%  processed.
%    \begin{macrocode}
\ifLL@combine
%    \end{macrocode}
%  \begin{macro}{\@@end}
%    \begin{macrocode}
  \def\@@end{%
    \clearpage\pagestyle{empty}%
%    \end{macrocode}
% Restore the original \cmd{\@outputpage} command (removing any related
% background pictures).
%    \begin{macrocode}
    \let\@outputpage\LL@outputpage
%    \end{macrocode}
% Suppresses all everyshi's clients (removing other kinds of
% background pictures) but our page saving macro is still needed for
% the next step and must be set again.
%    \begin{macrocode}
    \def\@EveryShipout@Hook{}%
    \def\@EveryShipout@AtNextHook{}%
    \EveryShipout{\LL@savePage}%
%    \end{macrocode}
% Create empty pages if necessary.
%    \begin{macrocode}
    \loop\ifnum\c@LL@page<7\relax
      \ClassInfo{leaflet}{Generating empty page \the\c@page}%
      \null\newpage
    \repeat
%    \end{macrocode}
%
% \subsubsection{Reassembling the small pages}
%
% Here begins the real output using \LaTeX's original \cmd{\shipout}.
% The \textsf{everyshi} package isn't active any more.
% The begin dvi hook is reactivated.
%    \begin{macrocode}
    \let\shipout\LL@shipout \let\@begindvi\LL@begindvi
    \paperwidth=3\paperwidth
    \iflandscape
      \LL@pagesize@specials{\paperwidth}{\paperheight}%
    \else
      \LL@pagesize@specials{\paperheight}{\paperwidth}%
    \fi
%    \end{macrocode}
%  \begin{macro}{\LL@shipoutPage}
% \changes{v1.0c}{2004/08/13}{Fix \cmd{\protect}-ion problems. (RN/HjG)}
% This is similar to \LaTeX's \cmd{\@outputpage}, but without a group;
% \cmd{\set@display@protect} seems to work as well.
%  \begin{macro}{\LL@preparePages}
%  \begin{macro}{\LL@preparePage}
% Helper macros for page output: reassemble the small pages.
% 
%    \begin{macrocode}
    \newcommand*\LL@shipoutPage[1]{%
%     \set@display@protect
      \let \protect \noexpand
      \shipout\vb@xt@\paperheight{%
        \set@typeset@protect
        \vskip-1in%
        \@begindvi\hb@xt@\paperwidth{\hskip-1in##1\hss}\vss}}%
    \newcommand*\LL@preparePages[3]{%
      \typeout{[\@Roman{##1}\space\@Roman{##2}\space\@Roman{##3}] ==>}%
%    \end{macrocode}
% Add a background picture to a large page. 
%    \begin{macrocode}
      \pictur@(0,0)\@nameuse{LL@largePic\Roman{page}}\endpicture%
      \LL@preparePage{##1}\LL@preparePage{##2}\LL@preparePage{##3}}%
    \newcommand*\LL@preparePage[1]{%
      \expandafter\box\csname LL@box\@Roman{##1}\endcsname}%
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%  \end{macro}
% Combine and output the frontside and the backside.
%    \begin{macrocode}
    \LL@selectOutput
      {\setcounter{page}{1}%
       \LL@shipoutPage{\LL@rotate@I{\LL@preparePages{5}{6}{1}}}}%
      {\setcounter{page}{2}%
       \LL@shipoutPage{\LL@rotate@II{\LL@preparePages{2}{3}{4}}}}%
    \LL@@end
  }%
%    \end{macrocode}
% End of the redefinition of \cmd{\@@end}.
%  \end{macro}
%    \begin{macrocode}
\else
%    \end{macrocode}
% Create empty pages if necessary and then call the normal \LaTeX\ end.
%    \begin{macrocode}
  \LL@pagesize@specials{\paperwidth}{\paperheight}%
  \AtEndDocument{%
    \clearpage\pagestyle{empty}%
    \loop\ifnum\c@LL@page<7\relax
      \ClassInfo{leaflet}{Generating empty page \the\c@page}%
      \null\newpage
    \repeat
  }
\fi
%</class>
%    \end{macrocode}
% Done. Phew! (Did you hear that deep-drawn sigh?)
%
% \Finale
%\endinput
%
% And here comes the user manual ...
%<*manual>
\listfiles
\errorcontextlines=99
\documentclass[
%%notumble,
%%nofoldmark,
%%dvipdfm,
%%portrait,
%%titlepage,
%%nocombine,
%%a3paper,
%%debug,
%%nospecialtricks,
%%draft,
]{leaflet}

%\setcounter{secnumdepth}{1}

\renewcommand*\foldmarkrule{.3mm}
\renewcommand*\foldmarklength{5mm}
%\setmargins{11mm}{3in}{8mm}{20mm}
%
%\pagestyle{plain}

\usepackage[T1]{fontenc}
\usepackage{textcomp}
\usepackage{mathptmx}
\usepackage[scaled=0.9]{helvet}
% the TeX and LaTeX logos for use with Times
\makeatletter
\def\ptmTeX{T\kern-.1667em\lower.5ex\hbox{E}\kern-.075emX\@}
\DeclareRobustCommand{\ptmLaTeX}{L\kern-.3em
        {\setbox0\hbox{T}%
         %\vb@xt@ % :-)
         \vbox to\ht0{\hbox{%
                            \csname S@\f@size\endcsname
                            \fontsize\sf@size\z@
                            \math@fontsfalse\selectfont
                            A}%
                      \vss}%
        }%
        \kern-.12em
        \ptmTeX}
\makeatother
\let\TeX=\ptmTeX
\let\LaTeX=\ptmLaTeX
\usepackage{shortvrb}
\MakeShortVerb{\|}
\usepackage{url}
\usepackage{graphicx}
\usepackage[dvipsnames,usenames]{color}
\definecolor{LIGHTGRAY}{gray}{.9}

%%%%\renewcommand{\descfont}{\normalfont}
\newcommand\Lpack[1]{\textsf{#1}}
\newcommand\Lclass[1]{\textsf{#1}}
\newcommand\Lopt[1]{\texttt{#1}}
\newcommand\Lprog[1]{\textit{#1}}

\newcommand*\defaultmarker{\textsuperscript\textasteriskcentered}

\title{The document class \Lclass{leaflet}}
\author{%
  Rolf Niepraschk\\
  Walter Schmidt\\
  Hubert G\"a\ss lein}
\date{Last updated~\docdate\\printed \today}

\CutLine*{1}% Dotted line without scissors
\CutLine{6}%  Dotted line with scissors

\AddToBackground{5}{%  Background of a small page
  \put(0,0){\textcolor{Cerulean}{\rule{\paperwidth}{\paperheight}}}}

\AddToBackground*{2}{% Background of a large page
  \put(\LenToUnit{.5\paperwidth},\LenToUnit{.5\paperheight}){%
    \makebox(0,0)[c]{%
      \resizebox{.9\paperwidth}{!}{\rotatebox{35.26}{%
        \textsf{\textbf{\textcolor{LIGHTGRAY}{BACKGROUND}}}}}}}}

\begin{document}

\maketitle
\thispagestyle{empty}

%%\LARGE

%%\tableofcontents


\section{Overview}

The document class \Lclass{leaflet} creates a document of (up to) six
small pages in portrait orientation, arranged physically on two
``normal-size'' pages. The target page sizes supported by the standard
\LaTeX{}  \Lclass{article} are available, plus |a3paper|. Printing these
to both sides of a sheet and folding appropriately will yield a six-page
leaflet.

%% TEST: These commands are no longer disabled!
\iffalse
\reversemarginpar
\marginpar[XXX]{YYY}
\fi
%% TEST: These commands are disabled!
\onecolumn
\twocolumn[WWW]
%% end of TEST

\section{Requirements}

Using the \Lclass{leaflet} class requires that the final
document is created in PostScript or PDF format, using
\begin{itemize}
  \item \TeX{} and \Lprog{dvips}, or
  \item pdf\TeX{}, or
  \item V\TeX{} in PS or PDF mode.
\end{itemize}
(Some other drivers supported by standard \LaTeX{} work as well.)

The non-standard macro package \Lpack{everyshi} \cite{cit:everyshi} is
used by the \Lclass{leaflet} class.


\section{Features}

Basically the \Lclass{leaflet} class provides the same features as the
standard \Lclass{article} class. There are, however, a number of
differences and restrictions, as well as some additional facilities and
peculiarities:

\begin{itemize}

\item
The sectioning level |\part| is not available.
The other sectioning levels are not numbered by default.

\item
References to the page where floating objects are located may come out
wrong (this includes |\pageref| as well as |\listof...| commends).

\item
Section headers are typeset in a smaller font size than in the
standard classes.

\item
You may use list-like environments just as in the standard classes.
The left margins have been adjusted to work well with the 
\Lopt{a4paper} and \Lopt{letterpaper} class options.
With other target page sizes, you'll have to adjust them.

Here's a small demo:
\begin{description}
\item[Uncle Meat] First entry in a description environment.
\item[King Kong] Second entry.
    \begin{itemize}
    \item First entry in an itemize environment.
        \begin{enumerate}
        \item First entry in an enumerate environment.
        \item Second entry.
            \begin{enumerate}
            \item First entry in an enumerate environment.
                \begin{enumerate}
                \item First entry in an enumerate environment.
                \item Second entry.
                \end{enumerate}
            \item Second entry.
                \begin{itemize}
                \item First entry in an itemize environment.
                \item Second entry.
                \end{itemize}
            \item Another entry.
            \end{enumerate}
        \item Another entry.
        \end{enumerate}
    \item Second entry.
    \item Another entry.
    \end{itemize}
\item[Frunobulax] Another entry.
\end{description}

\item
Marginal notes are pointless on the given page size and
are disabled.

\item
Two-column typesetting is not supported for the same reason.

\item
By default, there are no page headers, page footers or page numbers,
nor is there any space reserved for these.

However, you can restore them, if you like.
To do so, use |\pagestyle| as with the standard classes,
and |\setlength| to adjust the corresponding parameters (like 
|\headheight|).
At last, you have to call the new macro \par
|  \setmargins{top}{bottom}{left}{right}|.

\item
Paragraphs are separated by vertical space; the first line
of a paragraph is not indented by default.

\item
By default, all paragraphs are typeset as if you had
specified |\sloppy| in the document preamble.

\item
A small folding mark is created between the second and the
third page.

\item
The macro |\CutLine| draws a vertical dotted line with
scissor symbols between the page indicated by its argument and the
preceding one.
The starred version omits the scissors symbols.

\item
In case the text does not fit on six pages, a warning (or error,
depending on some class option, see below) will be issued.

\item
To add some background picture to individual pages, you can use
|\AddToBackground| commands. Its first argument specifies the page,
the second one the picture commands.
The starred version puts the picture on the combined pages.

\end{itemize}


\section{Customization}

The typeface to be used for the section headings is given by the macro
|\sectfont|, and the typeface to be used for the labels of the
|description| environment is given by |\descfont|.
Both macros default to |\bfseries| and can be changed using
|\renewcommand*|.

The horizontal and vertical and margins of the (small) pages
default to 8\,mm and 11\,mm, respectively, and can be changed
using |\setmargins|, as explained above.
This may be useful, if the printing engine exhibits larger unprintable
margins.

The macros |\foldmarkrule| and |\foldmarklength| determine the stroke
width and the length of the fold mark, which is printed between the
second and the third page.
They default to 0.4\,pt and 2\,mm, respectively, and can be changed
using |\renewcommand*| (\emph{not} |\setlength|!).
See also the class options \Lopt{foldmark} and \Lopt{nofoldmark}.


\section{Class options}

Default options are marked with an asterisk:
\begin{description}
\item[\Lopt{tumble}{\defaultmarker}, \Lopt{notumble}]
  By default, the contents of the back side of the final sheet is
  printed upside down.
  The option \Lopt{notumble} suppresses that.
  Doing so may be necessary to suit the behavior of certain printing
  engines.
  Specifying \Lopt[notumble] may also be useful during the writing of
  a document, to enable proof-reading on the screen.
\item[\Lopt{frontside}, \Lopt{backside}, \Lopt{bothsides}{\defaultmarker}]
  These options control whether only the front page, the back page or
  both pages of the final sheet are to be be created.
  Thus, you can create separate files for the front an back side of
  the sheet.
\item[\Lopt{foldmark}{\defaultmarker}, \Lopt{nofoldmark}]
  These options specifiy whether or not a fold mark is to be printed.
\item[\Lopt{combine}{\defaultmarker}, \Lopt{nocombine}]
  These options specify whether the (small) pages should be output 
  combined on a (large) target page (\Lopt{combine}) or as individual 
  pages (\Lopt{nocombine}).

  At the same time, the determine behaviour in case the text does not 
  fit on six (small) pages.
  By default (\Lopt{combine}), an error is raised---and the surplus pages
  will be gobbled.
  Otherwise (\Lopt{nocombine}), just a warning will be issued;
  shortening the text appropriately is left to the user.
\end{description}

Other options are passed to the \Lclass{article} class.


\section{Changes over version 0.3}

The present release of the \Lclass{leaflet} class differs basically
from its predecessor, version~0.3, which had been developed originally
by J\"urgen Schlegelmilch.

The main change is, that no more post-processing is required to
arrange the pages on the sheet.
Furthermore, the overall layout has been changed slightly to suit the
small page size better.
In general, documents that were written for version~0.3 will exhibit
different line and page breaks when typeset using the new version of
this document class.

\begin{thebibliography}{000}
\bibitem{cit:latex-man}
  \textsc{L.\,Lamport}: \LaTeX. A Document Preparation System.
  \textit{User's Guide And Reference Manual.} Second Edition. 1994.
\bibitem{cit:everyshi}
  \textsc{M.\,Schr\"oder}: The \Lpack{everyshi} package. 2001.
  CTAN: \url{macros/latex/contrib/ms/everyshi.dtx}
\end{thebibliography}

\loggingall
\end{document}
%</manual>
\endinput