path: root/Master/texmf-dist/source/latex/currfile/currfile.dtx

% \iffalse meta-comment
%<=*COPYRIGHT>
%%
%% Copyright (c) 2010-2011 by Martin Scharrer <martin@scharrer.me>
%% ---------------------------------------------------------------
%%
%% This work may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3c
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%%
%%   http://www.latex-project.org/lppl.txt
%%
%% and version 1.3c or later is part of all distributions of LaTeX
%% version 2008/05/04 or later.
%%
%% This work has the LPPL maintenance status `maintained'.
%%
%% The Current Maintainer of this work is Martin Scharrer.
%%
%% This work consists of the files currfile.dtx, currfile.ins
%% and currfile.sty.
%%
%<=/COPYRIGHT>
% \fi
%
% \iffalse
%<*driver>
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\ProvidesFile{currfile.dtx}[%
%<=*DATE>
    2015/04/23
%<=/DATE>
%<=*VERSION>
    v0.7c
%<=/VERSION>
    DTX file for currfile package]

\documentclass{ydoc}[2011/03/19]
\usepackage{currfile}[2011/09/18]
\usepackage{ifpdf}
\usepackage{booktabs}
\usepackage{hyperref}
\usepackage{flafter}
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\let\IncludeImplementation\relax
%\let\IncludeImplementation\empty %^^A Enable implementation
\ifx\IncludeImplementation\relax
    \OnlyDescription
\fi
\let\cnt\env
\begin{document}
  \DocInput{currfile.dtx}
  \PrintChanges
  \PrintIndex
\end{document}
%</driver>
% \fi
%
% \CheckSum{1114}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
%
% \changes{v0.1}{2010/04/08}{Initial version}
% \changes{v0.2}{2010/04/10}{Now work for all files, not only for \cs{input} and \cs{include} files.
%  Added package option 'fink' to define the same macros as the 'fink' package.
% }
% \changes{v0.3}{2011/01/03}{Update to use new version of filehook.}
% \changes{v0.4}{2011/01/09}{Added if-macros and sanitized currfile macros.}
% \changes{v0.5}{2011/09/18}{Added support for \cs{input@path} and files with multiple dots.}
% \changes{v0.6}{2012/05/06}{Added support for absolute file paths.}
% \changes{v0.7}{2012/05/15}{Added support for parent file paths.}
% \changes{v0.7a}{2012/10/28}{Fixed issue with \pkg{enumitem} package which redefines \cs{value}.}
% \changes{v0.7b}{2013/02/01}{Support for \cs{\subinput*} etc.\ from the \pkg{import} package which requires a different path search order.}
% \changes{v0.7c}{2015/04/23}{Removed stack underflow warning if loaded by other package. Set default file name in this case to main file name.}
%
% \GetFileInfo{currfile.dtx}
%
% \DoNotIndex{\newcommand,\newenvironment,\fi,\relax,\def,\gdef,\xdef}
% \DoNotIndex{\RequirePackage,\space,\PackageError,\PackageWarning,\let}
% \DoNotIndex{\ifx,\global,\long,\dindent,\else,\empty,\expandafter}
% \DoNotIndex{\csname,\endcsname,\DeclareBoolOption,\DeclareStringOption}
% \DoNotIndex{\SetupKeyvalOptions,\begingroup,\endgroup,\@gobble,\edef}
% \DoNotIndex{\message,\jobname,\@namedef}
%
% \author{Martin Scharrer}
% \email{martin@scharrer-online.de}
% \repository{https://bitbucket.org/martin_scharrer/currfile/}
% \maketitle
%
% \begin{abstract}
% This small package provides the file name and path information of the current input file as \LaTeX{} macros.
% It properly supports file names with multiple dots and the \cs{input@path} feature used by some packages like \pkg{import}.
% Optionally also the absolute location of current input file can be provided if a special compiler option is enabled.
% \end{abstract}
%
% \tableofcontents
%
% \section{Important notice}
% This package relies heavily on the package \pkg{filehook} by the same author and installs at-begin and at-end hooks for all files.
% The provided macros for the file names \emph{will only work for files loaded \emph{after} the package}.
% This means only for files which are getting opened afterwards and where not yet opened, as the at-begin hook is required to run.
% The macros will therefore not work correctly in a package which loaded \pkg{currfile}, but for all further loaded packages.
%
% The options \opt{abspath} and \opt{realmainfile} may be used to improve the behavior in such cases.
%
% However, it is simply recommended to load \pkg{currfile} as early as possible. It can even be loaded before the class using
% \Macro\RequirePackage{currfile}.
%
% \section{Usage}
%
% \DescribeMacro{\currfiledir}
% \DescribeMacro{\currfilebase}
% \DescribeMacro{\currfileext}
% \DescribeMacro{\currfilename}
% \DescribeMacro{\currfilepath}
% The directory, base (name without extension), extension (without dot), name (=base+`|.|'+ext) and path (=dir+name) of the current file are provided by these macros.
% This means that the macros returns the file information of the file they are used in. All macros are fully expanded, i.e.\ only hold
% text and not further macros. They are also ``sanitized'' to ensure that all characters, especially special ones like `|_|', are taken verbatim.
% However this special characters might not be displayed correctly in all fonts. A good font is text-type (\Macro\ttfamily, \Macro\texttt{\ldots}),
% but other fonts can be used using the \pkg{url} package, e.g.: |\urlstyle{rm}\expandafter\nolinkurl\expandafter{\currfilename}|.
% Note that the directory separator is always `|/|' even under MS Windows.
%
% Special care is taken to keep the file information of \Macro\included files till the final \Macro\clearpage command, so that page header and footer of the last page
% will hold the correct data.
%
% Since v0.2 all files are are taken into account, i.e.\ files read using \Macro\input, \Macro\include, \Macro\InputIfFileExists, \Macro\usepackage, \Macro\RequirePackage and even
% \Macro\LoadClass and similar macros. Before v0.2 only \Macro\input or \Macro\include and the main file were taken into account.
%
% This package uses the \pkg{filehook} package written by the same author. See there for possible incompatibilities with classes or other packages.
%
% If required more detailed information can be found in the implementation section \ifx\IncludeImplementation\relax(compile this manual with \Macro\AlsoImplementation)\else
% \unskip~\ref{sec:impl}\fi.
%
% \begingroup
% \let\DescribeCounter\DescribeKey
% \let\keydescstyle\macrodescstyle
% \DescribeCounter{currfiledepth}
% This\marginpar{\raggedright New in v0.7 from 2012/05/15} \LaTeX\ counter provides the nesting depth of the current input file.
% For the main file name it has a value of 0.
% Inside a sub-file of the main file it has a value of 1, while in a sub-file to that file it has a value of 2, etc.
% Like all \LaTeX\ counter it can be typeset using \Macro\arabic{currfiledepth} and its numeric value can be accessed
% using \Macro\value{currfiledepth}.
% \endgroup
%
% \DescribeMacro{\ifcurrfiledir}{<text>}{<true>}{<false>}
% \DescribeMacro{\ifcurrfilebase}{<text>}{<true>}{<false>}
% \DescribeMacro{\ifcurrfileext}{<text>}{<true>}{<false>}
% \DescribeMacro{\ifcurrfilename}{<text>}{<true>}{<false>}
% \DescribeMacro{\ifcurrfilepath}{<text>}{<true>}{<false>}
% This\marginpar{\raggedright New in v0.4 from 2011/01/09} if-macros allow the comparison of \meta{text} with the current file directory, base, extension, name and path, respectively.
% The \meta{text} is fully expanded and sanitized for the comparison. Example: |\ifcurrfileext{cfg}{I'm in a config file}{No config file!}|
%
% \DescribeMacro{\ifcurrfile}{<currfile macro or text>}{<text>}{<true>}{<false>}
% Compares the given \meta{currfile macro or text} with \meta{text}. Both are taken as file name parts and are fully expanded and sanitized before the comparison.
% This general macro is a little slower then the specialised macros above but might be useful to compare different file names/paths where non of the two is the current file.
% Note that the all comparisons are done insensitive to the catcodes of the texts, which is what users want. Different comparision macros (|\ifx|, \pkg{ifthenelse}) might not do this.
%
% \subsection{Package Options}
% The package provides the following options:
%
% The string options \opt{mainext} and \opt{maindir} can be used to provide the extension (without the dot) and directory of the main file.
% This is required if the above macros should be used for the main file itself and if this does has a file extension other than `|.tex|' (e.g.\ a |.dtx| file)
% or is not located in the current directory. The \opt{mainext} is by default `|tex|' and the \opt{maindir} is the empty
% string. See also the related \pkg{realmainfile} option.
%
% To provide support for the macros defined by the \pkg{fink} package (see section~\ref{sec:fink}) a boolean \opt{fink} option exists.
% If the \pkg{fink} package is loaded before \pkg{currfile} this option is automatically enabled to provide
% compatibility. The \opt{mainext} and \opt{maindir} options are then automatically set to the values of the identical
% options of \pkg{fink}. Note that \pkg{fink} is now officially declared deprecated by its author in favour of
% \pkg{currfile}.
%
% Using the boolean \opt{abspath} option\marginpar{\raggedright New in v0.6 from 2012/05/06}
% the support for absolute directories and paths is enabled. This loads the
% sub-package \pkg{currfile-abspath}.
% This requires the compiler option `|-recorder|' to be used.
% See \autoref{sec:abspath} for more details.
% This option will also enabled the related option \opt{realmainfile} if it isn't explicitly used.
%
% If the boolean \opt{realmainfile} option\marginpar{\raggedright New in v0.6 from 2012/05/06}
% is enabled the real main file path is determined using the sub-package \pkg{currfile-abspath}.
% This option is very useful if the job-name is set to something else then the main file base name, e.g.\ using the
% `|-jobname|' compiler option. Note that this option requires the correct file extension being set using \opt{mainext}
% (without the dot). If the main file has the default extension `|.tex|' then no extra efford is required. For `|.dtx|' files
% |mainext=dtx| must also be used, otherwise the correct file name can't be determined.
% This option requires the compiler option `|-recorder|' to be used in order to work correctly.
% See \autoref{sec:abspath} for more details.
%
% Using the boolean \opt{parent} option\marginpar{\raggedright New in v0.7 from 2012/05/15}
% additional macros are set for the parent file of the current file.
% See \autoref{sec:parent} for more details.
%
% \section{Absolute paths}\label{sec:abspath}
% If\marginpar{\raggedright New in v0.6 from 2012/05/06}
% required also the absolute path and directory of the current input file can be provided.
% This feature is implemented by the sub-package \pkg{currfile-abspath} which is automatically loaded by the
% \opt{abspath} option.
% The absolute path information are read from the `|\jobname.fls|' file produced by the `|-recorder|' compiler option
% (i.e.\ compile with `|pdflatex -recorder file.tex|').
% Without this compiler option a warning is produced and the related macros stay empty.
% Note that TeX Live under Linux and Windows is able to read the currently produced `|.fls|' file while with MiKTeX
% the file of the last run is still active. The means that the information is not available with MiKTeX in the very
% first compiler run and every time the `|.fls|' file is deleted. Also, changes in the file structure are taking
% two compiler runs in order to be noticed. With TeX Live the `|.fls|' file and its information is always current.
%
%
% \subsection{Additional \pkg{currfile} macros for absolute dir and path}
% Using the \opt{abspath} package option of \pkg{currfile} the following macros with absolute directories and paths are enabled.
%
% \DescribeMacro{\currfileabsdir}
% \DescribeMacro{\currfileabspath}
% Hold the absolute directory and path (directory plus filename) of the current input file, respectively.
% Both macros will always be empty if the `|.fls|' file is not available.
%
% \DescribeMacro{\ifcurrfileabsdir}{<text>}{<true>}{<false>}
% \DescribeMacro{\ifcurrfileabspath}{<text>}{<true>}{<false>}
% These if-macros allow the comparison of \meta{text} with the current absolute file directory and path, respectively.
% The \meta{text} is fully expanded and sanitized for the comparison.
%
% \subsection{Stand-alone usage of \pkg{currfile-abspath}}
% The sub-package \pkg{currfile-abspath} can also be used on its own and provides the following lower-level macros:
%
% \DescribeMacro\getpwd
% \DescribeMacro\thepwd
% The parent working directory (PWD) is read by \Macro\getpwd from the `|.fls|' file and stored in \Macro\thepwd.
% All characters of the directory will have catcode 12 (other) except spaces which still have catcode 10 (space).
% If the PWD could not be determined, because there was not `|.fls|' file, then `\Macro\thepwd` will be empty.
% Note that \Macro\getmainfile and \Macro\getabspath both also set \Macro\thepwd while reading the `|.fls|' file.
%
% \DescribeMacro\getmainfile
% \DescribeMacro\themainfile
% With \Macro\getmainfile the name of the main file is read from the `|.fls|' file and stored in \Macro\themainfile.
% All characters of the file name will have catcode 12 (other) except spaces which still have catcode 10 (space).
% If the main file name could not be determined, because there was not `|.fls|' file, then `\Macro\themainfile` will be empty.
%
% Here it is assumed that the first read file with the `|.tex|' extension is the main file. There is currently no user interface for this
% sub-package to change this extension (to e.g.\ `|.dtx|'). However, this can be done using the \opt{mainext} option
% of the main package \pkg{currfile}.
%
% \DescribeMacro\getabspath{<file name>}
% \DescribeMacro\getabspath{<dir/file name>}
% \DescribeMacro\theabspath
% \DescribeMacro\theabsdir
% With \Macro\getabspath{<file name>} the absolute path of the given file is read from the `|.fls|' file and stored in \Macro\theabspath.
% The directory component (path without file name) is stored in \Macro\theabsdir.
% The directory always ends in a `|/|' (even under MS Windows), so that a file name can be appended directly.
% All characters of both macros will have catcode 12 (other) except spaces which still have catcode 10 (space).
% Note that \meta{file name} must include the full extension but can include a directory component (e.g.\ `|subdir/file.tex|').
% If a directory component is given it will not be part of \Macro\theabsdir.
% For example \Macro\getabspath{'subdir/file.tex'} will return \Macro\theabspath as `|/absolute/path/subdir/file.tex|'
% and \Macro\theabsdir as `|/absolute/path/|'. This differs from \Macro\currfileabsdir which will always includes all directory
% elements, which is done by appending \Macro\currfiledir after \Macro\theabsdir.
%
% The given file must be directly accessible by \TeX, i.e.\ from the current directory or using the |TEXMF| tree,
% otherwise it the absolute location can not be determined. If the file can't be found in the `|.fls|' file the macros
% \Macro\theabspath and \Macro\theabsdir are empty.
%
% \section{Parent file macros}\label{sec:parent}
% If\marginpar{\raggedright New in v0.7 from 2012/05/15}
% the \opt{parent} package option is enabled the following macros are provided.
% They are no direct |\if...| macros for these but the general \Macro\ifcurrfile macro can be used with them.
%
% \DescribeMacro{\parentfiledir}
% \DescribeMacro{\parentfilebase}
% \DescribeMacro{\parentfileext}
% \DescribeMacro{\parentfilename}
% \DescribeMacro{\parentfilepath}
% These macros are analog to the |\currfile...| macros but for the parent file of the current file.
% They are all empty for the main file which does not have a parent file.
%
% \DescribeMacro{\parentfileabsdir}
% \DescribeMacro{\parentfileabspath}
% These macros are provided if the \opt{abspath} option is used in addition to \opt{parent}.
% They are also empty for the main file.
%
%
% \section{Access all parent files}\label{sec:parents}
% If\marginpar{\raggedright New in v0.7 from 2012/05/15}
% the \opt{parents} package option is enabled the following macros are provided.
% Note that this option does not enable the \opt{parent} option.
%
% \DescribeMacro{\currfilegetparents}
% This macro locally defines file name macros for all parent files of the current input file:
% The macros are named like the ones of the \opt{parent} option, but also include a trailing
% roman number to indicate the parent file level, starting with `i` for the first parent file:
%
% \begin{DescribeMacrosTab}{llll}
% \Macro{\parentfilediri}     & \Macro{\parentfiledirii}     &  $\ldots$ \\
% \Macro{\parentfilebasei}    & \Macro{\parentfilebaseii}    &  $\ldots$ \\
% \Macro{\parentfileexti}     & \Macro{\parentfileextii}     &  $\ldots$ \\
% \Macro{\parentfilenamei}    & \Macro{\parentfilenameii}    &  $\ldots$ \\
% \Macro{\parentfilepathi}    & \Macro{\parentfilepathii}    &  $\ldots$ \\
% \Macro{\parentfileabsdiri}  & \Macro{\parentfileabsdirii}  &  $\ldots$ \\
% \Macro{\parentfileabspathi} & \Macro{\parentfileabspathii} &  $\ldots$ \\
% \end{DescribeMacrosTab}
% Note that these macros are only defined in the current group and not globally like all other file name macros.
% The number of the highest parent file is given by the \cnt{currfiledepth} counter.
%
% For example, if \Macro\currfilegetparents is used in a sub-sub-sub-file the \cnt{currfiledepth} counter is 3
% and \Macro\parentfilenameiii is the name of the main document file.
%
% \section{Usage inside file hooks}
% This package uses the `EveryFile' hooks of the \pkg{filehook} package to update its macros.
% Special care is taken to do this in a way so that the macros can be used safely inside other hook code, including other `EveryFile' hooks.
% Please note that the `AtEndOfPackageFile' and `AtEndOfClassFile' hooks are executed after `AtEndOfEveryFile'
% and therefore the |currfile| macros will hold the values of the parent file, not of that package or class file.
%
% \section{Compatibility with the \texttt{fink} package}\label{sec:fink}
% The \pkg{fink} package (\emph{fi}le \emph{n}ame \emph{k}eeper) provides a similar functionality. It has inspired this package in several points (e.g.\ package
% options). However, it does not exclude package and other preamble files and does not take care to change the filename \emph{after} the \Macro\clearpage of
% \Macro\include. The author of \texttt{fink} is now discontinuing it in favour of this package.
% Existing documents which use \pkg{fink} should either rename the related macros as shown by Table~\ref{tab:fink} or use the \pkg{fink} option of \pkg{currfile} which defines
% the \pkg{fink} macros to use the \pkg{currfile} ones.
%
% Because both packages do basically the same thing, especially patch the same macros, there are incompatible and should not be loaded at the same time.
% In consent with the \pkg{fink} package author this package will undo most of the \pkg{fink} code if it was already loaded or prevent it from being loaded afterwards.
%
% \begin{table}
% \belowcaptionskip=\abovecaptionskip
% \abovecaptionskip=0pt
% \caption{Conversion from \texttt{fink} package to \texttt{currfile}.}
% \label{tab:fink}
% \centering
% \begin{tabular}{lll}
%   \toprule
%     \texttt{fink}  &  \texttt{currfile} &  Example Result        \\
%   \midrule
%      \cs{finkdir}  &  \cs{currfiledir}  & \ttfamily\currfiledir  \\
%      \cs{finkbase} &  \cs{currfilebase} & \ttfamily\currfilebase \\
%      \cs{finkext}  &  \cs{currfileext}  & \ttfamily\currfileext  \\
%      \cs{finkfile} &  \cs{currfilename} & \ttfamily\currfilename \\
%      \cs{finkpath} &  \cs{currfilepath} & \ttfamily\currfilepath \\
%   \bottomrule
% \end{tabular}
% \end{table}
%
% \StopEventually{}
%
% \section{Implementation}\label{sec:impl}
%
% \iffalse
%<*currfile.sty>
% \fi
%
% \subsection{Package \pkg{currfile}}
%
% \subsubsection{Package header}
%
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\ProvidesPackage{currfile}[%
%<!DATE>
%<!VERSION>
%<*DRIVER>
    2099/01/01 develop
%</DRIVER>
    Provides the file path elements of the current input file]
%    \end{macrocode}
%
% \subsubsection{Options}
%
%    \begin{macrocode}
\RequirePackage{kvoptions}
\SetupKeyvalOptions{family=currfile,prefix=currfile@}

\@ifpackageloaded{fink}{%
    \DeclareStringOption[\fnk@mainext]{mainext}%
    \DeclareStringOption[\fnk@maindir]{maindir}%
    \DeclareBoolOption[true]{fink}%
    \PackageWarning{currfile}{Deprecated package 'fink' detected. %
      The 'fink' option will default to 'true'.^^J%
      If set to 'false' no 'fink' macros will be changed but they will stop
      working correctly!}%
}{%
    \DeclareStringOption[tex]{mainext}%
    \DeclareStringOption[\@currdir]{maindir}%
    \DeclareBoolOption[false]{fink}%
}%
\DeclareVoidOption{force}{\PassOptionsToPackage{force}{filehook}}
\DeclareBoolOption[false]{parent}
\DeclareBoolOption[false]{parents}
\DeclareBoolOption[false]{realmainfile}%
\let\ifcurrfile@realmainfile\relax
\DeclareBoolOption[false]{abspath}%
\RequirePackage{filehook}[2011/01/09]
\ProcessKeyvalOptions*\relax

\begingroup
\xdef\currfile@mainext{\currfile@mainext}%
\xdef\currfile@maindir{\currfile@maindir}%
\def\@tempa{./}%
\ifx\@tempa\currfile@maindir
    \global\let\currfile@maindir\@empty
\fi
\endgroup

%    \end{macrocode}
% Check if \opt{realmainfile} option was used. If not it is determined
% by the \opt{abspath} option.
%    \begin{macrocode}
\expandafter\ifx\csname ifcurrfile@realmainfile\endcsname\relax
    \ifcurrfile@abspath
        \currfile@realmainfiletrue
    \else
        \currfile@realmainfilefalse
    \fi
\fi

\ifcurrfile@abspath
    \RequirePackage{currfile-abspath}
\else
\ifcurrfile@realmainfile
    \RequirePackage{currfile-abspath}
\fi\fi
%    \end{macrocode}
%
%
% \subsubsection{File Hooks}
% The \pkg{filehook} package is used to execute the macros at the correct places.
% However it must be loaded before the option processed because the |fink| compatibility
% code in |filehook-fink| will modify the option list.
% The internal interface, not the user-interface, is used to make sure that the file names are valid for all other hooks.
%
%    \begin{macrocode}
\filehook@prefixwarg\filehook@every@atbegin{%
  \currfile@push
  \currfile@set{#1}%
}
\filehook@appendwarg\filehook@every@atend{%
  \currfile@pop
}
%    \end{macrocode}
%
%
% \subsubsection{Set Current Values}
%
% \begin{macro}{\currfile@set}
% Sets the file information which are parsed by \LaTeX's \Macro\filename@parse.
% \changes{2011/09/18}{v0.5}{Now supports path elements from \cs{input@path}.}
% \changes{2011/09/18}{v0.5}{Now supports multiple dots in the file name.}
%    \begin{macrocode}
\def\currfile@set#1{%
  \begingroup
    \currfile@setparent
    \edef\@filef@und{#1}%
    \ifx\input@path\@undefined\else
        \currfile@checkpath
    \fi
    \@onelevel@sanitize\@filef@und
    \let\filename@simple\currfile@parseext
    \let\filename@base\@gobble
    \expandafter\filename@parse\expandafter{\@filef@und}%
    \global\let\currfiledir\filename@area
    \global\let\currfilebase\filename@base
    \global\let\currfileext\filename@ext
    \xdef\currfilename{\currfilebase\ifx\currfileext\@empty\else.\currfileext\fi}%
    \xdef\currfilepath{\currfiledir\currfilename}%
    \ifcurrfile@abspath
        \getabspath\currfilepath
        \global\let\currfileabspath\theabspath
        \xdef\currfileabsdir{\theabsdir\currfiledir}%
    \fi
    \global\advance\c@currfiledepth by\@ne
  \endgroup
%<debug> \expandafter\gdef\expandafter\dindent\expandafter{\dindent\space}%
%<debug> \message{^^JDEBUG: \dindent\empty Entering file '\currfilename' ^^J }%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@parent}
% Sets the current file data as parent file data. Must be called directly before
% updating the current file data.
%    \begin{macrocode}
\ifcurrfile@parent
\ifcurrfile@abspath
\def\currfile@setparent{%
    \global\let\parentfiledir\currfiledir
    \global\let\parentfilebase\currfilebase
    \global\let\parentfileext\currfileext
    \global\let\parentfilename\currfilename
    \global\let\parentfilepath\currfilepath
    \global\let\parentfileabspath\currfileabspath
    \global\let\parentfileabsdir\currfileabsdir
}
\else
\def\currfile@setparent{%
    \global\let\parentfiledir\currfiledir
    \global\let\parentfilebase\currfilebase
    \global\let\parentfileext\currfileext
    \global\let\parentfilename\currfilename
    \global\let\parentfilepath\currfilepath
}
\fi
\else
\let\currfile@setparent\relax
\fi
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\currfile@checkpath}
% This loop is placed in an own macro for efficiency reasons.
% In the majority of cases it should not be needed and having it as
% a macro avoids the need to skip over this code as part of a conditional clause
% for every read file.
% \changes{2011/09/18}{v0.5}{New macro as part of the \cs{input@path} support.}
%    \begin{macrocode}
\def\currfile@checkpath{%
    \openin\@inputcheck\@filef@und\relax
    \ifeof\@inputcheck
        \currfile@check@inputpath
    \fi
    \closein\@inputcheck
}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\currfile@check@inputpath}
% Check all paths in the \cs{input@path} macro.
%    \begin{macrocode}
\def\currfile@check@inputpath{%
    \expandafter\@tfor
    \expandafter\@tempb
    \expandafter:\expandafter=\input@path\do{%
        \openin\@inputcheck\@tempb\@filef@und\relax
        \ifeof\@inputcheck\else
            \edef\@filef@und{\@tempb\@filef@und}%
            \@break@tfor
        \fi
    }%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@checkpath}
% Special version for the \pkg{import} package.
%    \begin{macrocode}
\AtEndOfPackageFile*{import}{%
\def\currfile@checkpath{%
    \ifx\IfFileExists\@iffileonpath
        \currfile@check@inputpath
    \else
        \openin\@inputcheck\@filef@und\relax
        \ifeof\@inputcheck
            \currfile@check@inputpath
        \fi
    \fi
    \closein\@inputcheck
}%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@parseext}
% Replacement for \Macro\filename@simple to allow multiple dots in a filename.
% This needs |\let\filename@base\@gobble| before it is called.
% \changes{2011/09/18}{v0.5}{New macro as part of the multi-dot support.}
%    \begin{macrocode}
\begingroup
\@makeother{.}
\gdef\currfile@parseext#1.#2\\{%
    \ifx\\#2\\%
        \ifx\filename@base\@gobble
            \def\filename@base{#1}%
            \let\filename@ext\currfile@defaultext%
        \else
            \def\filename@ext{#1}%
        \fi
    \else
        \edef\filename@base{\filename@base.#1}%
        \def\@tempa{\currfile@parseext#2\\}%
        \expandafter\@tempa
    \fi
}
\endgroup
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@defaultext}
% Holds the default extension `|tex|' with catcode \emph{other} like \Macro\jobname.
% \changes{2011/09/18}{v0.5}{New macro as part of the multi-dot support.}
%    \begin{macrocode}
\def\currfile@defaultext{tex}
\@onelevel@sanitize\currfile@defaultext
%    \end{macrocode}
% \end{macro}
%
% \subsubsection{File Stack}
% The file information are pushed and popped on a stack to save and restore them when
% entering and leaving a sub-file, respectively. This is quite similar to the way
% \LaTeX\ saves file base names and extension as well as the `@' status (letter or other) for
% package and class files.
%
% \begin{macro}{\currfile@push}
%    \begin{macrocode}
\ifcurrfile@abspath
\def\currfile@push{%
  \xdef\currfile@stack{%
    {\currfiledir}%
    {\currfilebase}%
    {\currfileext}%
    {\currfileabsdir}%
    \currfile@stack
  }%
}
\else
\def\currfile@push{%
  \xdef\currfile@stack{%
    {\currfiledir}%
    {\currfilebase}%
    {\currfileext}%
    \currfile@stack
  }%
}
\fi
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@pop}
%    \begin{macrocode}
\def\currfile@pop{%
%<debug> \message{^^JDEBUG: \dindent\empty Leaving file '\currfilename' ^^J }%
  \ifcase0%
    \ifx\currfile@stack\empty 1\else
    \ifnum\c@currfiledepth<\@ne 1\fi\fi
  \relax
    \global\advance\c@currfiledepth by\m@ne
  \else
    \global\let\currfile@stack\currfile@stackinit
    \global\c@currfiledepth=\z@
  \fi
  \expandafter\currfile@pop@\currfile@stack\relax
  \relax\relax\relax\relax\relax\relax\relax
%<debug> \message{^^JDEBUG: \dindent\empty Restoring file '\currfilename' ^^J }%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@pop@}
%    \begin{macrocode}
\ifcurrfile@abspath
\def\currfile@pop@#1#2#3#4{%
  \gdef\currfiledir{#1}%
  \gdef\currfilebase{#2}%
  \gdef\currfileext{#3}%
  \xdef\currfilename{\currfilebase\ifx\currfileext\empty\else.\currfileext\fi}%
  \xdef\currfilepath{\currfiledir\currfilename}%
  \gdef\currfileabsdir{#4}%
  \xdef\currfileabspath{\ifx\currfileabsdir\@empty\else\currfileabsdir\currfilename\fi}%
  \currfile@updatestack
}
\else
\def\currfile@pop@#1#2#3{%
  \gdef\currfiledir{#1}%
  \gdef\currfilebase{#2}%
  \gdef\currfileext{#3}%
  \xdef\currfilename{\currfilebase\ifx\currfileext\empty\else.\currfileext\fi}%
  \xdef\currfilepath{\currfiledir\currfilename}%
  \currfile@updatestack
}
\fi
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@updatestack}
%    \begin{macrocode}
\ifcurrfile@parent
\ifcurrfile@abspath
\def\currfile@updatestack#1#2#3#4#5\relax{%
  \gdef\parentfiledir{#1}%
  \gdef\parentfilebase{#2}%
  \gdef\parentfileext{#3}%
  \xdef\parentfilename{\parentfilebase\ifx\parentfileext\empty\else.\parentfileext\fi}%
  \xdef\parentfilepath{\parentfiledir\parentfilename}%
  \gdef\parentfileabsdir{#4}%
  \xdef\parentfileabspath{\ifx\parentfileabsdir\@empty\else\parentfileabsdir\parentfilename\fi}%
  \gdef\currfile@stack{{#1}{#2}{#3}{#4}#5}%
}
\else
\def\currfile@updatestack#1#2#3#4\relax{%
  \gdef\parentfiledir{#1}%
  \gdef\parentfilebase{#2}%
  \gdef\parentfileext{#3}%
  \xdef\parentfilename{\parentfilebase\ifx\parentfileext\empty\else.\parentfileext\fi}%
  \xdef\parentfilepath{\parentfiledir\parentfilename}%
  \gdef\currfile@stack{{#1}{#2}{#3}#4}%
}
\fi
\else
\def\currfile@updatestack#1\relax{%
  \gdef\currfile@stack{#1}%
}
\fi
%    \end{macrocode}
% \end{macro}
%
%    \begin{macrocode}
\ifcurrfile@parents
%    \end{macrocode}
%
% \begin{macro}{\currfilegetparents}
%    \begin{macrocode}
\newcommand*\currfilegetparents{%
  \@tempcnta\@ne
  \expandafter\currfile@getparents\currfile@stack\relax
  \relax\relax\relax\relax\relax\relax\relax
}
\ifcurrfile@abspath
\def\currfile@getparents#1#2#3#4{%
  \@namedef{parentfiledir\romannumeral\@tempcnta}{#1}%
  \@namedef{parentfilebase\romannumeral\@tempcnta}{#2}%
  \@namedef{parentfileext\romannumeral\@tempcnta}{#3}%
  \expandafter\edef\csname parentfilename\romannumeral\@tempcnta\endcsname{#2\ifx\empty#3\empty\else.#3\fi}%
  \expandafter\edef\csname parentfilepath\romannumeral\@tempcnta\endcsname{#1\csname parentfilename\romannumeral\@tempcnta\endcsname}%
  \@namedef{parentfileabsdir\romannumeral\@tempcnta}{#4}%
  \expandafter\edef\csname parentfileabspath\romannumeral\@tempcnta\endcsname{%
    \expandafter\ifx\csname parentfileabsdir\romannumeral\@tempcnta\endcsname\@empty\else
      \csname parentfileabsdir\romannumeral\@tempcnta\endcsname
      \csname parentfilename\romannumeral\@tempcnta\endcsname
    \fi
  }%
  \ifnum\@tempcnta<\c@currfiledepth
    \advance\@tempcnta\@ne
    \expandafter\currfile@getparents
  \fi
}
\else
\def\currfile@getparents#1#2#3{%
  \@namedef{parentfiledir\romannumeral\@tempcnta}{#1}%
  \@namedef{parentfilebase\romannumeral\@tempcnta}{#2}%
  \@namedef{parentfileext\romannumeral\@tempcnta}{#3}%
  \expandafter\edef\csname parentfilename\romannumeral\@tempcnta\endcsname{#2\ifx\empty#3\empty\else.#3\fi}%
  \expandafter\edef\csname parentfilepath\romannumeral\@tempcnta\endcsname{#1\csname parentfilename\romannumeral\@tempcnta\endcsname}%
  \ifnum\@tempcnta<\c@currfiledepth
    \advance\@tempcnta\@ne
    \expandafter\currfile@getparents
  \fi
}
\fi
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\parentfile}[2]{file path part}{number}
% Expands to the \Macro\parentfile<part><roman number> macro.
%    \begin{macrocode}
\newcommand\parentfile[2]{%
    \csname parentfile#1\romannumeral#2\endcsname
}
%    \end{macrocode}
% \end{macro}
%
%    \begin{macrocode}
\fi
%    \end{macrocode}
%
% \iffalse
%<debug> \def\dindent{}
% \fi
%
% \begin{macro}{\currfile@stack}
% \begin{macro}{\currfile@stackinit}
% Initialise the stack with empty values and set the main file values.
%    \begin{macrocode}
\let\currfile@stack\@empty
\let\currfiledir\@empty
\let\currfilebase\@empty
\let\currfileext\@empty
\let\currfilename\@empty
\let\currfilepath\@empty
\let\currfileabspath\@empty
\let\currfileabsdir\@empty
\newcounter{currfiledepth}
\global\c@currfiledepth\m@ne
\ifcurrfile@realmainfile
    \getmainfile
    \ifx\themainfile\@empty
        \currfile@set{\currfile@maindir\jobname.\currfile@mainext}
    \else
        \currfile@set{\themainfile}
    \fi
\else
    \currfile@set{\currfile@maindir\jobname.\currfile@mainext}
\fi
\currfile@push
\let\currfile@stackinit\currfile@stack
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% Disable the change of the \opt{abspath} option at this point
% in order to freeze the stack format.
%    \begin{macrocode}
\let\currfile@abspathfalse\relax
\let\currfile@abspathtrue\relax
%    \end{macrocode}
%
% \subsubsection{If Macros}
% \begin{macro}{\ifcurrfilename}
%    \begin{macrocode}
\newcommand*\ifcurrfilename{\begingroup\currfile@if\currfilename}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ifcurrfilebase}
%    \begin{macrocode}
\newcommand*\ifcurrfilebase{\begingroup\currfile@if\currfilebase}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ifcurrfileext}
%    \begin{macrocode}
\newcommand*\ifcurrfileext{\begingroup\currfile@if\currfileext}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ifcurrfiledir}
%    \begin{macrocode}
\newcommand*\ifcurrfiledir{\begingroup\currfile@if\currfiledir}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ifcurrfilepath}
%    \begin{macrocode}
\newcommand*\ifcurrfilepath{\begingroup\currfile@if\currfilepath}
%    \end{macrocode}
% \end{macro}
%
%    \begin{macrocode}
\ifcurrfile@abspath
%    \end{macrocode}
%
% \begin{macro}{\ifcurrfileabspath}
%    \begin{macrocode}
\newcommand*\ifcurrfileabspath{\begingroup\currfile@if\currfileabspath}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ifcurrfileabsdir}
%    \begin{macrocode}
\newcommand*\ifcurrfileabsdir{\begingroup\currfile@if\currfileabsdir}
%    \end{macrocode}
% \end{macro}
%
%    \begin{macrocode}
\fi
%    \end{macrocode}
%
% \begin{macro}{\ifcurrfile}[1]{currfile macro or text}
% Expands and sanitizes the first argument and then calls the internal if-macro
% with the result.
%    \begin{macrocode}
\newcommand*\ifcurrfile[1]{%
    \begingroup
    \edef\@tempb{#1}%
    \@onelevel@sanitize\@tempb
    \currfile@if\@tempb
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\currfile@if}[2]{currfile macro to compare}{compare text}
% Expands the text and sanitize it to ensure correct neutral catcodes.
% Then it temp macro is compared to the given currfile macro.
%    \begin{macrocode}
\def\currfile@if#1#2{%
    \edef\@tempa{#2}%
    \@onelevel@sanitize\@tempa
    \ifx\@tempa#1%
        \endgroup
        \expandafter\@firstoftwo
    \else
        \endgroup
        \expandafter\@secondoftwo
    \fi
}
%    \end{macrocode}
% \end{macro}
%
%
% \subsubsection{Fink Macros}
%
% The \pkg{fink} option defines all \pkg{fink} package macros to use the ones provided
% by this package. If the \pkg{fink} package was loaded beforehand the restoration
% of these macros must be avoided at the end of this file
% (\pkg{fink}s \Macro\InputIfFileExists was then used to load this package).
% If the package was not loaded its version is set to a dummy value and its
% options to this package options. If \pkg{fink} is attempted to be loaded later
% it will trigger an package option clash if different option are used.
% Otherwise it will be taken as already loaded and not loaded ``again''.
%
%    \begin{macrocode}
\ifcurrfile@fink
    \def\finkfile{\currfilename}%
    \def\finkdir{\currfiledir}%
    \def\finkpath{\currfilepath}%
    \def\finkbase{\currfilebase}%
    \def\finkext{\currfileext}%
    \@ifpackageloaded{fink}{%
        \def\fink@restore#1{}%
    }{%
        \@namedef{ver@fink.sty}{2011/01/09}%
        \expandafter\edef\csname opt@fink.sty\endcsname{%
            maindir=\currfile@maindir,mainext=\currfile@mainext
        }%
    }%
\else
    \@ifpackageloaded{fink}{}{%
        \AtBeginOfPackageFile{fink}{%
            \PackageError{currfile}{The 'fink' package is now deprecated. %
             Load 'currfile' with the 'fink' option or see the upgrade guide in the manual}{}%
        }%
    }%
\fi
%    \end{macrocode}
%
% \iffalse
%</currfile.sty>
% \fi
%
% \iffalse
%<*currfile-abspath.sty>
% \fi
% \subsection{Sub-package \pkg{currfile-abspath}}
%
% \subsubsection{Package header}
%
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[1999/12/01]
\ProvidesPackage{currfile-abspath}[%
%<!DATE>
%<!VERSION>
%<*DRIVER>
    2099/01/01 develop
%</DRIVER>
    Provides absolute file paths, the parent working directory and the main file name]
%    \end{macrocode}
%
%
% \subsubsection{Preliminary Code}
%
% Declare and init macros
%    \begin{macrocode}
\newcommand*\thepwd{}
\newcommand*\theabspath{}
\newcommand*\theabsdir{}
\newcommand*\themainfile{}
%    \end{macrocode}
% Long, empty:
%    \begin{macrocode}
\newif\ifcurrfile@abspath@windows
%    \end{macrocode}
%
% Ensure that the main file extension is defined and not empty.
%    \begin{macrocode}
\providecommand\currfile@mainext{tex}
\ifx\currfile@mainext\@empty
    \PackageError{currfile-abspath}
        {Empty main file extension is not supported}{}%
\fi
%    \end{macrocode}
%
% \iffalse
%\edef\themainfile{\jobname.\currfile@mainext}
%\@onelevel@sanitize\themainfile
% \fi
%
%
% \begin{macro}{\currfile@abspath@noflswarning}
%
%    \begin{macrocode}
\def\currfile@abspath@noflswarning{%
    \PackageWarning{currfile-abspath}
        {The required recorder file (.fls) was not found.\MessageBreak
            Please compile with the '-recorder' option.\MessageBreak
            Note that MikTeX requires two compiler runs.\MessageBreak
            Occurred}%
    \global\let\currfile@abspath@noflswarning\relax
    \global\csname currfile@abspathfalse\endcsname
}%
%    \end{macrocode}
% \end{macro}
%
%
% \subsubsection{Parent Working Directory (PWD)}
% Opens the |\jobname.fls| file and checks for the `|PWD|' line (should be the very first one).
% \begin{macro}{\getpwd}
%    \begin{macrocode}
\newcommand\getpwd{%
    \begingroup
    \let\thepwd\@empty
    \IfFileExists{\jobname.fls}{%
        \openin\@inputcheck=\jobname.fls\relax
        \endlinechar\m@ne
        \loop
            \readline\@inputcheck to \line
            \@onelevel@sanitize\line
            \expandafter\currfile@checkpwd\line\relax\relax\relax\relax\relax
            \ifeof\@inputcheck\else
        \repeat
        \closein\@inputcheck
    }
    \currfile@abspath@noflswarning
    \edef\@tempa{%
        \def\noexpand\thepwd{\thepwd}%
    }%
    \expandafter
    \endgroup
    \@tempa
}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\currfile@checkpwd}
% Checks if the read line starts with `|PWD|' and stores the rest
% of the line in \Macro\thepwd. The space after `|PWD|' is skipped by
% \TeX\ when looking for |#4|.
%    \begin{macrocode}
\def\currfile@checkpwd#1#2#3#4#5\relax{%
    \edef\@tempa{#1#2#3}%
    \edef\@tempb{PWD}%
    \@onelevel@sanitize\@tempb
    \ifx\@tempa\@tempb
        \edef\thepwd{#4#5/}%
        \def\@tempa{#4}%
        \def\@tempb{/}%
        \ifx\@tempa\@tempb
            \currfile@abspath@windowsfalse
        \else
            \currfile@abspath@windowstrue
        \fi
        \let\iterate\relax
    \fi
}
%    \end{macrocode}
% \end{macro}
%
%
% \subsubsection{Absolute Path}
%
% \begin{macro}{\getabspath}
% Opens the |\jobname.fls| file and checks for the first `|INPUT|' line
% which lists the given filename.
%    \begin{macrocode}
\newcommand\getabspath[1]{%
    \begingroup
    \edef\filename{#1}%
    \@onelevel@sanitize\filename%
    \let\theabspath\@empty
    \let\theabsdir\@empty
    \IfFileExists{\filename}{%
    \IfFileExists{\jobname.fls}{%
        \openin\@inputcheck=\jobname.fls\relax
        \endlinechar\m@ne
        \expandafter\currfile@abspath@defs\expandafter{\filename}%
        \readline\@inputcheck to \line
        \@onelevel@sanitize\line
        \expandafter\currfile@checkpwd\line\relax\relax\relax\relax\relax
        \loop
            \readline\@inputcheck to \line
            \@onelevel@sanitize\line
            \expandafter\currfile@abspath@getabspath\expandafter{\line}%
            \ifeof\@inputcheck\else
        \repeat
        \closein\@inputcheck
    }\currfile@abspath@noflswarning
    }{}%
    \edef\@tempa{%
        \def\noexpand\theabspath{\theabspath}%
        \def\noexpand\theabsdir{\theabsdir}%
        \def\noexpand\thepwd{\thepwd}%
    }%
    \expandafter
    \endgroup
    \@tempa
}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\getmainfile}
% Opens the |\jobname.fls| file and checks for the first `|INPUT|' line
% which lists a file with the main file extension (usually `|.tex|').
%    \begin{macrocode}
\newcommand\getmainfile{%
    \begingroup
    \let\themainfile\@empty
    \IfFileExists{\jobname.fls}{%
        \openin\@inputcheck=\jobname.fls\relax
        \endlinechar\m@ne
        \readline\@inputcheck to \line
        \@onelevel@sanitize\line
        \expandafter\currfile@checkpwd\line\relax\relax\relax\relax\relax
        \loop
            \readline\@inputcheck to \line
            \@onelevel@sanitize\line
            \expandafter\currfile@abspath@getmainfile\expandafter{\line}%
            \ifeof\@inputcheck\else
        \repeat
        \closein\@inputcheck
    }%
    \currfile@abspath@noflswarning
    \edef\@tempa{%
        \def\noexpand\themainfile{\themainfile}%
        \def\noexpand\thepwd{\thepwd}%
    }%
    \expandafter
    \endgroup
    \@tempa
}
%    \end{macrocode}
% \end{macro}
%
%
% \subsubsection{Line scanning macros for abspath and mainfile}
%
%
% \begin{macro}{\currfile@abspath@testfname}
% Test if directory is empty because the file is only listed by name, i.e. is in the PWD
% or because the searched path was an absolute one and no further path elements are therefore listed
% In the first case set \Macro\theabsdir to \Macro\thepwd, in the second case keep it empty.
%    \begin{macrocode}
\def\currfile@abspath@testfname#1#2#3\relax{%
    \ifcurrfile@abspath@windows
        \def\@tempa{#2}%
        \def\@tempb{:}%
    \else
        \def\@tempa{#1}%
        \def\@tempb{/}%
    \fi
    \ifx\@tempa\@tempb\else
        \let\theabsdir\thepwd
    \fi
}
%    \end{macrocode}
% \end{macro}
%
% Change catcodes for `|INPUT|' to 12 (\emph{other}), because we need
% them this way in the parameter lists of the following macros.
%    \begin{macrocode}
\begingroup
\catcode`I=12
\catcode`N=12
\catcode`P=12
\catcode`U=12
\catcode`T=12
%    \end{macrocode}
%
% \begin{macro}{\currfile@abspath@defs}
% Dynamically defines the macros needed to find the line with the requested file name.
%    \begin{macrocode}
\gdef\currfile@abspath@defs#1{%
    \def\currfile@abspath@checkabspath ##1INPUT ##2#1\relax##3\relax##4\@nnil{%
        \ifx\@empty##4\@empty\else
            \def\theabsdir{##2}%
            \ifx\theabsdir\@empty
                \currfile@abspath@testfname#1\@empty\@empty\relax
            \fi
            \edef\theabspath{\theabsdir#1}%
            \let\iterate\relax
        \fi
    }%
    \def\currfile@abspath@getabspath##1{%
        \currfile@abspath@checkabspath##1\relax INPUT \@empty#1\relax{}\relax\@nnil
    }%
}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\currfile@abspath@checkmainfile}
% \begin{macro}{\currfile@abspath@getmainfile}
% These two macros are defined with the main file extension given by
% \Macro\currfile@mainext in their parameter texts. To insert the extension
% with the correct catcode 12 two temporary auxiliary macros are utilized.
% The |get| macro places the line content before the |check| macro with a suitable
% fallback code so that the search text is always found and no \TeX\ error is raised.
% The |check| macro tests if the fallback has occurred and stores the read path
% if this was not the case.
%    \begin{macrocode}
\def\@tempa#1{%
    \gdef\currfile@abspath@checkmainfile ##1INPUT ##2#1\relax##3\relax##4\@nnil{%
        \ifx\@empty##4\@empty\else
            \def\themainfile{##2#1}%
            \let\iterate\relax
        \fi
    }%
    \gdef\currfile@abspath@getmainfile##1{%
        \currfile@abspath@checkmainfile##1\relax INPUT \@empty#1\relax{}\relax\@nnil
    }%
}
\edef\@tempb{.\currfile@mainext}
\@onelevel@sanitize\@tempb
\expandafter\@tempa\expandafter{\@tempb}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% Ends catcode changes:
%    \begin{macrocode}
\endgroup
%    \end{macrocode}
%
% \iffalse
%</currfile-abspath.sty>
% \fi
%
% \iffalse
% \fi
%
% \Finale
\endinput