path: root/Master/texmf-dist/source/fonts/auncial-new/auncial.dtx

% \iffalse meta-comment
%
% auncial.dtx
%
%  Author: Peter Wilson (Herries Press) herries dot press at earthlink dot net
%  Copyright 1999--2005 Peter R. Wilson
%
%  This work may be distributed and/or modified under the
%  conditions of the Latex Project Public License, either
%  version 1.3 of this license or (at your option) any
%  later version.
%  The latest version of the license is in
%    http://www.latex-project.org/lppl.txt
%  and version 1.3 or later is part of all distributions of
%  LaTeX version 2003/06/01 or later.
%
%  This work has the LPPL maintenance status "author-maintained".
%
%  This work consists of the files listed in the README file.
%
% If you do not have the docmfp package (available from CTAN in
% tex-archive/macros/latex/contrib/supported), comment out the
% \usepackage{docmfp} line below and uncomment the line following it. 
%
%<*driver>
\documentclass[twoside]{ltxdoc}
%%%%\usepackage{docmfp}
%%%%%% \providecommand{\DescribeVariable}[1]{} \newenvironment{routine}[1]{}{}
\usepackage{url}
\usepackage[draft=false,
            plainpages=false,
            pdfpagelabels,
            bookmarksnumbered,
            hyperindex=false
           ]{hyperref}
\providecommand{\phantomsection}{}
\OnlyDescription %% comment this out for the full glory
\EnableCrossrefs
\CodelineIndex
\setcounter{StandardModuleDepth}{1}
\makeatletter
  \@mparswitchfalse
\makeatother
\renewcommand{\MakeUppercase}[1]{#1}
\pagestyle{headings}
\newenvironment{addtomargins}[1]{%
  \begin{list}{}{%
    \topsep 0pt%
    \addtolength{\leftmargin}{#1}%
    \addtolength{\rightmargin}{#1}%
    \listparindent \parindent
    \itemindent \parindent
    \parsep \parskip}%
  \item[]}{\end{list}}
\begin{document}
  \raggedbottom
  \DocInput{auncial.dtx}
\end{document}
%</driver>
%
% \fi
%
% \CheckSum{132}
%
% \DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath}
% \DoNotIndex{\@centercr,\@cite}
% \DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
% \DoNotIndex{\@input,\@ixpt,\@m}
% \DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint}
% \DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
% \DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
% \DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
% \DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
% \DoNotIndex{\advance,\Alph,\alph}
% \DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
% \DoNotIndex{\bullet}
% \DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
% \DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
% \DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
% \DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
% \DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
% \DoNotIndex{\fbox}
% \DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
% \DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
% \DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
% \DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
% \DoNotIndex{\input}
% \DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
% \DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
% \DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
% \DoNotIndex{\NeedsTeXFormat,\newdimen}
% \DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
% \DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
% \DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
% \DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
% \DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
% \DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font}
% \DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman}
% \DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength}
% \DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
% \DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
% \DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
% \DoNotIndex{\viipt,\vipt,\vskip,\vspace}
% \DoNotIndex{\wd,\xiipt,\year,\z@}
%
% \changes{v1.0}{1999/05/22}{First public release}
% \changes{v1.0a}{2001/01/02}{Fixed missing * in fd files}
% \changes{v2.0}{2005/11/27}{Major rewrite, 'full' T1 encoding, PostScript Type 1}
%
% \def\fileversion{v1.0} \def\filedate{1999/05/22}
% \def\fileversion{v1.0a} \def\filedate{2001/01/02}
% \def\fileversion{v2.0} \def\filedate{2005/11/27}
% \newcommand*{\Lpack}[1]{\textsf {#1}}           ^^A typeset a package
% \newcommand*{\Lopt}[1]{\textsf {#1}}            ^^A typeset an option
% \newcommand*{\file}[1]{\texttt {#1}}            ^^A typeset a file
% \newcommand*{\Lcount}[1]{\textsl {\small#1}}    ^^A typeset a counter
% \newcommand*{\pstyle}[1]{\textsl {#1}}          ^^A typeset a pagestyle
% \newcommand*{\Lenv}[1]{\texttt {#1}}            ^^A typeset an environment
% \newcommand*{\AD}{\textsc{ad}}
% \newcommand*{\thisfont}{Artificial Uncial}
%
% \title{The \Lpack{Artificial Uncial} fonts\thanks{This
%        file has version number \fileversion, last revised
%        \filedate.}}
%
% \author{%
% Peter Wilson\footnote{\texttt{herries dot press at earthlink dot net}}\\
% Herries Press }
% \date{\filedate}
% \maketitle
% \begin{abstract}
%    The \Lpack{auncial} bundle provides a PostScript Type1 set of 
% \thisfont{} bookhands 
% as used
% for manuscripts in the 6th to the 10th century. This is one in a series
% of manuscript fonts.
%
%  The font is only supplied in the special bookhands B1 encoding.
% \end{abstract}
% \tableofcontents
% \listoftables
%
% 
%
% \section{Introduction}
%
%    The \Lpack{auncial} bundle provides a PostScript Type1 version of a 
% Metafont~\cite{METAFONT} rendition 
% of the \thisfont{} manuscript book-hand that was in use between about the
% sixth and tenth centuries~\AD. It is part of a project to provide fonts
% covering the major manuscript hands between the first century~\AD{} and
% the invention of printing. The principal resources used in this project
% are listed in the Bibliography.
%
%  The font is only supplied in the special bookhands B1 encoding.
%
% This manual is typeset according to the conventions of the
% \LaTeX{} \textsc{docstrip} utility which enables the automatic
% extraction of the \LaTeX{} macro source files~\cite{GOOSSENS94}.
% The \Lpack{docmfp} package is used for documenting the Metafont portions
% of the distribution~\cite{DOCMFP}.
%
%    Section~\ref{sec:usc} describes the usage of the package.
%
% \subsection{Manuscript book-hands}
%
% Before the invention of printing all books were written by hand. The book-hands
% used by the scribes and copyists for the manuscripts changed as time 
% went on. Table~\ref{tab:1} lists some of the common book-hands which were used
% between the 1st and 15th centuries. The later book-hands formed the basis of the
% fonts used by the early printers, which in turn form the basis of the printing
% fonts in use today.
%
%    The manuscript book-hands were written with a broad nibbed reed or quill
% pen. Among the distinguishing characteristics of a hand, apart from the 
% actual shape of the letters, are the angle of the pen (which controls the
% variation between thick and thin strokes) and the height of a letter compared
% to the width of the nib. The lower the ratio of the letter height to nib
% width, the more condensed is the script. The scripts also varied in their
% typical height. 
%
%    Table~\ref{tab:1} gives an `average' x-height for each
% script, which I obtained by measuring a sample of photographs of
% manuscripts written in the various hands. About a dozen examples
% of each book-hand were measured. This figure should not be taken too
% seriously.
%
%    There was not a sharp division between the use of one hand and another.
% Many manuscripts exhibit a variety of hands in the same document. For example,
% the scribe writing in an Uncial hand may have used Roman Rustic letters
% for capitals. Usually the same pen was used for the two different scripts.
%
%    Generally speaking, as a hand got older it became more embelished, and 
% therefore took longer to write. As this happened a new hand would appear that
% was faster, and which would eventually make the earlier one obsolete.
%
%    Many of the book-hands were single-cased; that is, they did not have an
% upper- and lower-case as we do nowadays in Western scripts. On the other
% hand, a script might be majuscule or minuscule. A \textit{majuscule} script
% is one, like our upper-case, where the letters are drawn between two lines
% and are of a uniform height with no ascenders or descenders. 
% A \textit{minuscule} script, like our lower-case, is drawn between four lines 
% and has ascenders and  descenders.
%
% \begin{table}
% \centering
% \caption{The main manuscript book-hands} \label{tab:1}
% \begin{tabular}{lccccc} \hline
% Name                  & Century  & x-height & Height     & Pen  & Normalised \\
%                       &          & (mm)   & (nib widths) & angle & height  \\ \hline
% Roman Rustic          & 1--6     & 5.7    & 4--6         & 45     & 1.90 \\
% Uncial                & 3--6     & 4.1    & 4--5         & 30     & 1.37 \\
% Half Uncial           & 3--9     & 3.2    & 3--6         & 20--30 & 1.07 \\
% Artificial Uncial     & 6--10    & 4.2    & 3--6         & 10     & 1.40 \\
% Insular majuscule     & 6--9     & 4.2    & 5            & 0--20  & 1.40 \\
% Insular minuscule     & 6 onward & 4.1    & 5--6         & 45--70 & 1.37 \\
% Carolingian minuscule & 8--12    & 3.0    & 3--5         & 45     & 1.00 \\
% Early Gothic          & 11--12   & 3.8    & 4--6         & 20--45 & 1.27 \\
% Gothic Textura        & 13--15   & 3.9    & 3--5         & 30--45 & 1.30 \\
% Gothic Prescius       & 13 onward & 3.3   & 4--5         & 45     & 1.10 \\
% Rotunda               & 13--15   & 3.2    & 4--6         & 30     & 1.07 \\
% Humanist minuscule    & 14 onward & 3.0   & 4--5         & 30--40 & 1.00 \\ \hline
% \end{tabular}
% \end{table}
%
%    During the period under consideration arabic numerals were effectively
% not used. At the beginning they were unknown and even though some knew
% of them towards the end, the glyphs used for them are not recognisable ---
% to me they look somewhat like cryllic letters --- and each locality
% and time had its own highly individualistic rendering. The general rule
% when using one of these book-hands is to write all numbers using
% roman numerals.
%
%    The Roman alphabet consisted of 23 capital letters --- the J, U and W 
% were absent. The book-hands initially used both a `u' and a `v' interchangeably
% but by the 10th century the practice had become to use the `v' before a vowel 
% and the `u' otherwise. The letter corresponding to the W sound appeared 
% in England around the 7th century in
% the form of the runic \textit{wen} character and by about the 11th century
% the `w' chacter was generally used. The `J' is the newest letter of all, not
% appearing until about the mid 16th century.
%
%    In the first century punctuation was virtually unknown, and typically
% would not even be any additional space between individual words, never
% mind denoting ends of sentences. Sometimes a dot at mid-height would be
% used as a word seperator, or to mark off the end of a paragraph. Effectively
% a text was a continuous stream of letters. By the time that printing was
% invented, though, all of our modern punctuation marks were being used.
%
%    Among all these manuscript hands, the Carolingian minuscule is the
% most important as our modern fonts are based on its letter shapes, and it is
% also at this point in time where the division occured between the black letter
% scripts as used even today in Germany, and the lighter fonts used elesewhere.
% The Rotunda and Humanist minuscule hands were developed in Italy and were
% essentially a rediscovery of the Carolingian minusucle. Guthenberg took the
% Gothic scripts as the model for his types. Later printers, 
% such as Nicholas Jenson of Venice,
% took the Humanist scripts as their models.
%
%
% \subsection{The \thisfont{} script}
%
%    The \thisfont{} hand, which is a minuscule script, was in use for some five
% centuries and was, in a sense, the sucessor to the Uncial book-hand. It was
% a much more calligraphic script, and as time went on it became even more
% decorated, until it was too time consuming to use. Usually the
% lettering in a manuscript was all one size. If the scribe felt the need
% for `capital' letters then, using the same pen, would either write a larger
% \thisfont{} letter or a Roman Capital letter. The capitals were only used at
% the start of a line, and were either fully or partially in the margin. The
% capitals were large, perhaps two to four times the size of a normal letter,
% and were the start of versals. As versals for use with other book-hands, 
% the script lived on until the end of the Middle Ages. 
%
%    I have provided a set of `capital' letters that are only a little larger
% than the normal letters for use in running text. If you want to typeset
% using versals, then I suggest Daniel Flipo's \Lpack{lettrine} 
% package~\cite{LETTRINE}.
% During the time the \thisfont{} script was used the alphabet only had 24 
% letters. I have included the missing J.
%
%    Arabic numerals were unknown at this time, so all numbers were written
% using the roman numbering system. I have provided Uncial versions of
% the arabic digits.
%
%    Punctuation was used, but not with the frequency of today.
% A sentence might be ended with
% a dot at mid-height or a paragraph ended with a colon, also at mid-height.
% The start
% of a paragraph might be marked with a capital letter (as a versal).
% The comma was was  a small pointed
% slash; the semi-colon was known, as was the single quotation 
% mark which was represented by a raised comma.
%
%
% \section{The \Lpack{auncial} and \Lpack{allauncl} packages} \label{sec:usc}
%
%     The \thisfont{} font family is called |auncl|. The font is supplied in 
% only the special bookhands B1 encoding. Thus, to use the font in a document
% you need to at least have: \\
% \verb?\usepackage[B1,...]{fontenc}? \\
% in the preamble. You also need to have installed the files: \\
% \file{b1enc.def}, \file{b1cmr.fd}, and possibly \file{TeXB1.enc}.\\
% These are available from the CTAN \file{bookhands} directory as the
% pair \file{bhenc.dtx} and \file{bhenc.ins}.
%
% \subsection{The \Lpack{auncial} package}
%
%    This is intended for the occasions when some short pieces of text have
% to be written in \thisfont{} while the majority of the document is in another
% font. The normal baselineskips are used.
%
% \DescribeMacro{\aunclfamily}
%    The |\aunclfamily| declaration starts typesetting with the \thisfont{} fonts.
% Use of the \thisfont{} font will continue until either there is another |\...family|
% declaration or the current group (e.g., environment) is closed.
%
% \DescribeMacro{\textuncl}
%    The command |\textuncl{|\meta{text}|}| will typeset \meta{text} using the
% \thisfont{} fonts.
%
% \subsection{The \Lpack{allauncl} package}
%
%
%    This package is for when the entire document will be typeset with the
% \thisfont font. The baselineskips are set to those appropriate to the
% book-hand. 
%
%    This is a minimalist package. Apart from declaring \thisfont{} to be the
% default font and setting the baselineskips appropriately, it makes no other
% alterations. 
% Vertical spacing
% before and after section titles and before and after lists, etc., will be
% too small as the \LaTeX{} design assumes a font comparable in size to
% normal printing fonts, and the book-hand is much taller.
% To capture more of the flavour of the time, all numbers
% should be written using roman numerals. 
% The \Lpack{romannum} package~\cite{ROMANNUM}
% can be used so that \LaTeX{} will typeset the numbers that it generates,
% like sectioning or caption numbers, using roman numerals instead of arabic 
% digits. 
%
% \DescribeMacro{\cmrfamily}
% \DescribeMacro{\textcmr}
% \DescribeMacro{\cmssfamily}
% \DescribeMacro{\textcmss}
% \DescribeMacro{\cmttfamily}
% \DescribeMacro{\textcmtt}
%    The |...family| declarations start typesetting with the Computer Modern Roman
% (|\cmrfamily|), the Computer Modern Sans (|\cmssfamily|), and the Computer
% Modern Typewriter (|\cmttfamily|) font families. The |\textcm..{|\meta{text}|}|
% commands will typeset \meta{text} in the corresponding Computer Modern font.
%
%    The \Lpack{allauncl} package automatically loads the \Lpack{auncial} package,
% so its font commands are available if necessary.
%
%
%
% \StopEventually{
% \bibliographystyle{alpha}
% \renewcommand{\refname}{Bibliography}
% \begin{thebibliography}{GMS94}
% \addcontentsline{toc}{section}{\refname}
%
% \bibitem[And69]{ANDERSON69}
% Donald M.~Anderson.
% \newblock \emph{The Art of Written Forms: The Theory and Practice of Calligraphy}.
% \newblock Holt, Rinehart and Winston, 1969.
%
% \bibitem[Bol95]{BOLOGNA95}
% Giulia Bologna.
% \newblock \emph{Illuminated Manuscripts: The Book before Gutenberg}.
% \newblock Crescent Books, 1995.
%
% \bibitem[Day95]{DAY95}
% Lewis F.~Day.
% \newblock \emph{Alphabets Old \& New}.
% \newblock (3rd edition originally published by B.~T.~Batsford, 1910) 
% \newblock Senate, 1995.
%
% \bibitem[Dro80]{DROGIN80}
% Marc Drogin.
% \newblock \emph{Medieval Calligraphy: Its History and Technique}.
% \newblock Allenheld, Osmun \& Co., 1980.
%
% \bibitem[Dru95]{DRUCKER95}
% Johanna Drucker.
% \newblock \emph{The Alphabetic Labyrinth}.
% \newblock Thames \& Hudson, 1995.
%
% \bibitem[Fir93]{FIRMAGE93}
% Richard A.~Firmage.
% \newblock \emph{The Alphabet Abecedarium}.
% \newblock David R~Goodine, 1993.
%
% \bibitem[Fli98]{LETTRINE}
% Daniel Flipo.
% \newblock \emph{The LETTRINE package}.
% \newblock (Available from CTAN in \texttt{macros/latex/contrib/supported}). 
% \newblock 1998.
%
% \bibitem[Har95]{HARRIS95}
% David Harris.
% \newblock \emph{The Art of Calligraphy}.
% \newblock DK Publishing, 1995.
%
% \bibitem[Jen95]{BETON}
% Frank Jensen.
% \newblock \emph{The BETON package}.
% \newblock (Available from CTAN in \texttt{macros/latex/contrib/supported}). 
% \newblock 1995.
%
% \bibitem[Joh71]{JOHNSTON75}
% Edward Johnston (ed. Heather Child).
% \newblock \emph{Formal Penship and Other Papers}.
% \newblock Penthalic, 1971.
%
% \bibitem[Knu87]{CM}
% Donald E.~Knuth.
% \newblock \emph{Computer Modern Typefaces}.
% \newblock Addison-Wesley, 1987.
%
% \bibitem[Knu92]{METAFONT}
% Donald E.~Knuth.
% \newblock \emph{The METAFONTbook}.
% \newblock Addison-Wesley, 1992.
%
% \bibitem[GMS94]{GOOSSENS94}
% Michel Goossens, Frank Mittelbach, and Alexander Samarin.
% \newblock \emph{The LaTeX Companion}.
% \newblock Addison-Wesley Publishing Company, 1994.
%
% \bibitem[Tho75]{THOMAS75}
% Alan G.~Thomas.
% \newblock \emph{Great Books and Book Collectors}.
% \newblock Weidenfield and Nichoson, 1975.
%
% \bibitem[Wil99]{DOCMFP}
% Peter R.~Wilson.
% \newblock \emph{The DOCMFP Package}.
% \newblock (Available from CTAN in \texttt{macros/latex/contrib/supported}). 
% \newblock 1999.
%
% \bibitem[Wil99b]{ROMANNUM}
% Peter R.~Wilson.
% \newblock \emph{The ROMANNUM Package}.
% \newblock (Available from CTAN in \texttt{macros/latex/contrib/supported}). 
% \newblock 1999.
%
% \end{thebibliography}
% \PrintIndex
% }
%
%
% \section{The font definition files} \label{sec:fd}
%
%    The font comes in normal and bold weights only.
%
%    \begin{macrocode}
%<*fdot1>
\DeclareFontFamily{OT1}{auncl}{}
  \DeclareFontShape{OT1}{auncl}{m}{n}{ <-8.5> auncl7 <8.5-15> auncl10 <15-> auncl17 }{} 
  \DeclareFontShape{OT1}{auncl}{m}{sl}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{OT1}{auncl}{m}{it}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{OT1}{auncl}{m}{sc}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{OT1}{auncl}{m}{u}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{OT1}{auncl}{bx}{n}{ <-8.5> aunclb7 <8.5-15> aunclb10 <15-> aunclb17 }{}
  \DeclareFontShape{OT1}{auncl}{bx}{it}{ <-> sub * auncl/bx/n }{}
  \DeclareFontShape{OT1}{auncl}{bx}{sl}{ <-> sub * auncl/bx/n }{}
  \DeclareFontShape{OT1}{auncl}{b}{n}{ <-> sub * auncl/bx/n }{}
%</fdot1>
%    \end{macrocode}
%
%
%    \begin{macrocode}
%<*fdt1>
\DeclareFontFamily{T1}{auncl}{}
  \DeclareFontShape{T1}{auncl}{m}{n}{ <-8.5> auncl7 <8.5-15> auncl10 <15-> auncl17 }{} 
  \DeclareFontShape{T1}{auncl}{m}{sl}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{T1}{auncl}{m}{it}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{T1}{auncl}{m}{sc}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{T1}{auncl}{m}{u}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{T1}{auncl}{bx}{n}{ <-8.5> aunclb7 <8.5-15> aunclb10 <15-> aunclb17 }{}
  \DeclareFontShape{T1}{auncl}{bx}{it}{ <-> sub * auncl/bx/n }{}
  \DeclareFontShape{T1}{auncl}{bx}{sl}{ <-> sub * auncl/bx/n }{}
  \DeclareFontShape{T1}{auncl}{b}{n}{ <-> sub * auncl/bx/n }{}
%</fdt1>
%    \end{macrocode}
%
%    \begin{macrocode}
%<*fdb1>
\DeclareFontFamily{B1}{auncl}{}
  \DeclareFontShape{B1}{auncl}{m}{n}{ <-> auncl10 }{} 
  \DeclareFontShape{B1}{auncl}{m}{sl}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{B1}{auncl}{m}{it}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{B1}{auncl}{m}{sc}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{B1}{auncl}{m}{u}{ <-> sub * auncl/m/n }{}
  \DeclareFontShape{B1}{auncl}{bx}{n}{ <-> aunclb10 }{}
  \DeclareFontShape{B1}{auncl}{bx}{it}{ <-> sub * auncl/bx/n }{}
  \DeclareFontShape{B1}{auncl}{bx}{sl}{ <-> sub * auncl/bx/n }{}
  \DeclareFontShape{B1}{auncl}{b}{n}{ <-> sub * auncl/bx/n }{}
%</fdb1>
%    \end{macrocode}
%
% \section{The package code} \label{sec:code}
%
% \subsection{The \Lpack{auncial} package}
%
%    The \Lpack{auncial} package is for typesetting short pieces of text
% in the \thisfont{} fonts.
%
%    Announce the name and version of the package, which requires
% \LaTeXe{}.
%    \begin{macrocode}
%<*usc>
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{auncial}[2005/11/27 v2.0 package for Artificial Uncial fonts]
%    \end{macrocode}
%
% \begin{macro}{\aunclfamily}
%    Selects the \thisfont{} font family in the B1 encoding.
% \changes{v1.1}{2005/07/26}{Providing B1 encoding only}
%    \begin{macrocode}
\newcommand{\aunclfamily}{\usefont{B1}{auncl}{m}{n}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textuncl}
%    Text command for the \thisfont{} font family.
%    \begin{macrocode}
\DeclareTextFontCommand{\textauncl}{\aunclfamily}
%    \end{macrocode}
% \end{macro}
%
%    The end of this package.
%    \begin{macrocode}
%</usc>
%    \end{macrocode}
%
% \subsection{The \Lpack{allauncl} package}
%
%    The \Lpack{allauncl} package is intended for use when the entire document
% will be typeset in the book-hand. This is a minimal package. Because the
% book-hand should not contain arabic digits a fuller package would redefine
% anything numbered in \LaTeX{} to use roman instead of arabic numbering.
% Also, because of the large |\baselineskip| many other aspects of \LaTeX{}
% to do with vertical positioning should also be redefined. 
%
%
%    Announce the name and version of the package, which requires
% \LaTeXe{}. It also uses the \Lpack{auncial} package.
%    \begin{macrocode}
%<*uscall>
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{allauncl}[2005/11/27 v2.0 package for all Artificial Uncial fonts]
\RequirePackage{auncial}
%    \end{macrocode}
%
% \begin{macro}{\Tienc}
%  A  macro for testing the value of |\encodingdefault|.
%    \begin{macrocode}
\providecommand{\Tienc}{OT1}
%    \end{macrocode}
% \end{macro}
%
%  Redefine the default fonts to be \thisfont, which has only one family 
% member.
% \begin{macro}{\rmdefault}
% \begin{macro}{\sfdefault}
% \begin{macro}{\ttdefault}
%    \begin{macrocode}
\renewcommand{\rmdefault}{auncl}
\renewcommand{\sfdefault}{auncl}
\renewcommand{\ttdefault}{auncl}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% The `leading' in the book-hand is the same as the |x-height|, which is much
% greater than for the CMR fonts. I have borrowed code from Frank Jensen's
% \Lpack{beton} package~\cite{BETON} to do this. The |x-height| (in points) 
% for the CMR
% fonts is given in Table~\ref{tab:cmrx}. Note that the CMR design sizes are
% 5--10, 12, and 17.28 points. The other values given are scaled from these 
% figures.
%
% \begin{table}
% \centering
% \caption{The x heights of the CMR and \thisfont{} fonts} \label{tab:cmrx}
% \begin{tabular}{ccc} \hline
% Design & CMR & \thisfont \\
% Size & X Height & X Height \\ \hline
% 5 & 2.14 & 3.00 \\
% 6 & 2.58 & 3.61 \\
% 7 & 3.00 & 4.22 \\
% 8 & 3.44 & 4.82 \\
% 9 & 3.86 & 5.40 \\
% 10 & 4.31 & 6.03 \\
% 11 & 4.74 & 6.64 \\
% 12 & 5.17 & 7.24 \\
% 14 & 6.03 & 8.44 \\
% 17 & 7.44 & 10.42 \\
% 20 & 8.75 & 12.25  \\
% 25 & 10.94 & 15.32  \\ \hline
% \end{tabular}
% \end{table}
%
% \begin{macro}{\auncial@baselineskip@table}
% A table of the normal font sizes and the corresponding baselineskip.
% The distance between baselines for \thisfont{} is over twice 
% the |x-height|.
% 
%    \begin{macrocode}
\newcommand{\auncial@baselineskip@table}{%
  <\@vpt>6.6%
  <\@vipt>7.9%
  <\@viipt>9.3%
  <\@viiipt>10.6%
  <\@ixpt>11.9%
  <\@xpt>13.3%
  <\@xipt>14.6%
  <\@xiipt>16.5%
  <\@xivpt>18.6%
  <\@xviipt>22.9%
  <\@xxpt>26.9%
  <\@xxvpt>33.7}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\auncial@new@setfontsize}
%  This is a macro that replaces the |\@setfontsize| macro which is called by
% the font size changing commands.
%    \begin{macrocode}
\newcommand{\auncial@new@setfontsize}[3]{%
  \edef\@tempa{\def\noexpand\@tempb####1<#2}%
  \@tempa>##2<##3\@nil{\def\auncial@baselineskip@value{##2}}%
  \edef\@tempa{\noexpand\@tempb\auncial@baselineskip@table<#2}%
  \@tempa><\@nil
  \ifx\auncial@baselineskip@value\@empty
    \def\auncial@baselineskip@value{#3}%
  \fi
  \auncial@old@setfontsize{#1}{#2}\auncial@baselineskip@value}
%    \end{macrocode}
% \end{macro}
%
% We had better give an author a means of using The Computer Modern fonts
% if necessary.
%
% \begin{macro}{\cmrfamily}
% \begin{macro}{\cmssfamily}
% \begin{macro}{\cmttfamily}
%    These macros select the Computer Modern Roman, Sans, and Typewriter 
% font families in either the T1 or OT1 encodings.
%    \begin{macrocode}
\ifx\Tienc\encodingdefault
  \providecommand{\cmrfamily}{\usefont{OT1}{cmr}{m}{n}}
  \providecommand{\cmssfamily}{\usefont{OT1}{cmss}{m}{n}}
  \providecommand{\cmttfamily}{\usefont{OT1}{cmtt}{m}{n}}
\else
  \providecommand{\cmrfamily}{\usefont{T1}{cmr}{m}{n}}
  \providecommand{\cmssfamily}{\usefont{T1}{cmss}{m}{n}}
  \providecommand{\cmttfamily}{\usefont{T1}{cmtt}{m}{n}}
\fi
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\textcmr}
%    Text command for the Computer Modern Roman font family.
%    \begin{macrocode}
\DeclareTextFontCommand{\textcmr}{\cmrfamily}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textcmss}
%    Text command for the Computer Modern Sans font family.
%    \begin{macrocode}
\DeclareTextFontCommand{\textcmss}{\cmssfamily}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textcmtt}
%    Text command for the Computer Modern Typewriter font family.
%    \begin{macrocode}
\DeclareTextFontCommand{\textcmtt}{\cmttfamily}
%    \end{macrocode}
% \end{macro}
%
%
% At the start of the document, change the |\@setfontsize| macro and call
% the normal font to implement the change.
%    \begin{macrocode}
\AtBeginDocument{%
  \let\auncial@old@setfontsize=\@setfontsize
  \let\@setfontsize=\auncial@new@setfontsize}
\AtBeginDocument{\normalsize}
%    \end{macrocode}
%
%    The end of this package.
%    \begin{macrocode}
%</uscall>
%    \end{macrocode}
%
% \section{The map file}
%
% Just a short file.
% \changes{v1.1}{2005/07/26}{Added map file}
%
%    \begin{macrocode}
%<*map>
auncl10      Bookhands-Artificial-Uncial        <auncl10.pfb
aunclb10     Bookhands-Artificial-Uncial-Bold   <aunclb10.pfb
%</map>
%    \end{macrocode}
%
%
% \Finale
%
\endinput

%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}