path: root/Master/texmf-dist/doc/plain/zztex/zzphrase.dat

//---------------------------------------------------------------------------
//
//  Copyright (c) 2012--2018 by Paul C. Anagnostopoulos
//
//  This software may be used on your own computer systems and may
//  be distributed freely to other people. It may not be sold or
//  incorporated into any commercial products.
//
//  Paul C. Anagnostopoulos
//  Windfall Software
//  978 371-2316
//  paul@windfall.com
//
//---------------------------------------------------------------------------
//
//  ZzExplore:  Describe built-in TeX, Plain TeX, ZzTeX, and design
//              file entities for compositors.
//
//              This is the main phrase file.
//
//  Created:    3 March 2016


// The following three templates are used to produce helpful explanations
// for phrases that do not match.

// No match to phrase

.template no_match
= No Match
Your request: ~.phrase;

There is no match for "~.word;".

~if not empty? choice;
Some possibilities are:
~foreach ph, choice;
* ~.ph;
~end;
*.
~fi;
----
If you think your request is reasonable, please inform Paul.

// Ambiguous match to phrase

.template ambiguous_match
= Ambiguous Match
Your request: ~.phrase;

The word "~.word;" is ambiguous.

Some possibilities are:
~foreach ph, choice;
* ~.ph;
~end;
*.
----
If you think your request is unambiguous, please inform Paul.

// Partial phrase

.template partial_phrase
= Partial Phrase
Your request: ~.phrase;

These words match the beginning of a phrase, but additional
words are needed.

~if not empty? choice;
Some possibilities are:
~foreach ph, choice;
* ~.ph;
~end;
*.
~fi;

If you are looking for a concept instead of specific examples,
it might help to try the plural of the word.
----
If you think your request is complete enough to produce
a description, please inform Paul.

//                      Help Text
//                      ---- ----


// Help

.phrase help help : text
.template
= ~.facility; v~.version;

~.facility; allows you to view descriptions of characters, commands,
block designs, and other entities that are defined by built-in TeX,
Plain TeX, ZzTeX, and book design files. It can also present more
detailed reports on concepts such as tags and tabular material.

Invoke ~.facility; as follows:

| > ~.facility; *word* *word* ...

The *word* parameters form a phrase that ~.facility; uses to determine
which information you want to see. If you don't include any words, this
help text is displayed. Do *not* include question words and verbs in your
request (e.g., "what is").

~include command_line_chars;

Without any options, the description is displayed on your terminal. If you
want to view a more stylish description in your browser, enter

| > ~.facility; -browser *word* *word* ...

The browser starts up in an independent window, allowing you to work and
read the description at the same time. Remember that you can close the
browser window with Alt+F4.

It is recommended that you add the following
alias to your 4NT/Take Command alias file:

  exp*lore=~.facility; -browser %$

For a list of interesting examples of ~.facility;, enter

| > ~.facility; examples

For a list of what's new in version ~.version; and earlier versions, enter

| > ~.facility; what's new

.phrase examples examples : text
.template
= Examples

Here are some examples of things you can do with ~.facility;.

* To see an overview of the current project:

  ~.facility; overview

* To learn about a particular command:

  ~.facility; \overrideparlength

* To find out whether a command is available for the current book:

  ~.facility; \separatefloat

* To get information about a particular math character:

  ~.facility; \beta

* To find out which types of enunciations or lists are available:

  ~.facility; enunciations
  ~.facility; lists

* To see some details about a particular enunciation:

  ~.facility; \enunciation theorem

* To learn the names of the zzd design macros for enunciations:

  ~.facility; enunciation designs

* To see all the details about the design of a particular enunciation:

  ~.facility; \enunciationtheoremdesign details

* To learn what a count register is:

  ~.facility; counts

* To get a list of all count registers or learn about a particular one:

  ~.facility; all counts
  ~.facility; \sectionnumber

* To see which type styles are available in the current book:

  ~.facility; type styles

* To find out which type relationship commands are available 
for a particular style:

  ~.facility; \tt

* To find out which styles are established for a particular type
size and whether they can be used in math:

  ~.facility; \footnotesize

.phrase whats_new what's new : text
.synonym what is new
.template
= What's New in ~.facility; v~.version;

* Complete description of the |\enunciation| block.
* Complete description of the indexing facility.
* Report of all bibliography entries for the project.
* Report of missing art files.
* List of commands for bibliography citations.
* Improved word matching for design elements that are not blocks.
* Improved report on at-sign commands.
* Complete documentation on the ZzSizeArt utility.
* Complete documentation on the new |\tabbing| block.
*.

== What's New in ~.facility; v1.1

* This "what's new" report.
* Improved report on math classes.
* Improved report on individual characters.
* Improved report on Greek letter commands.
* Report on the new |\immediatemathdisplay| modifier.
* Improved report on the |\immediatesublist| modifier.
* Reports on the new |\breakabove| and |\breakbelow| modifiers.
* Improved reports on the |\bottomfloat| et al. modifiers.
* New page make-up report.
* Complete documentation on the |\tabular| block and related commands.
* Lists of commands for horizontal spacing and vertical spacing.
* Report on penalties.
* Complete documentation on the |\todo| command.
* Complete documentation on the title adjustment commands.
* Report on block modifiers.
* Complete documentation on the |\code| block and related commands.
* Improved documentation on tags.
* Complete documentation on the various forms of |\eqno|.
* Complete documentation on the |\letterspace| command.
* Complete documentation on the |\art| block.
* Complete documentation on running heads and feet (runners).
*.

//                      ZzTeX et al Phrases
//                      ----- -- -- -------


// Accents

.phrase accents accents
.synonym text accents
.template
= Accent Commands

An accent command produces an accent over a character.
For example,

  Ha\v{c}ek na\"{\i}vet\'e, anyone?

produces

& Haček naïveté, anyone?
&.

Here is a list of all the accent commands.

&= Command& Description
----
~foreach acc, accent_table;
& |~.acc;|& ~.accent_table[acc];
~end;
&.
----
For information on a specific accent, try |~.facility; \*name*|.

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_accent <name> accent
.synonym accent <name>
.synonym <name> text accent
.synonym text accent <name>
.template
= |~.name;| Accent Command

~include common_info;

~.comment;

An accent command produces an accent over a character.
----
For a list of all accents, try |~.facility; accents|.

// Attributes

.phrase attributes attributes : text
.synonym command attributes
.template
= Attributes

When ~.facility; reports information about commands, math characters, and
other entities, it includes an item called *attributes*. An attribute
specifies special behavior of the command or character. Here is a list
of all the attributes.

* internal: The command is internal to Plain TeX or ZzTeX and is never
used directly in design or book files.
* long: The argument to the command can include multiple paragraphs.
* outer: The command can only be used directly in a book file; it cannot
be used by another command.
* limits: The large operator (e.g., |\sum|) sets its limits above and below.
* no limits: The large operator sets its limit as sub- and
superscripts.
* display limits: The large operator set its limits above and below when
used in a math display; as scripts when used in text.
*.

// Blocks

.phrase blocks blocks : text
.synonym elements
.template
= Blocks

The block is the primary design element provided by ZzTeX design
files. A block generally spans a large amount of text that must
be formatted in a special way. Examples are lists, footnotes,
and framed text.

Most blocks are started and ended with specific commands:

  \list{bullet}
  \item ...
  ...
  \endlist

A few blocks, however, are started and ended with the same command:

  \footnote{This is a footnote that will appear at the bottom.}

A footnote has only one design style, or *type*. However, there can be an
arbitrary number of different types of lists, such as bullet, number,
label, and dialog. If a block requires a type, the type name is the first
argument to the block command, as with |\list{bullet}| above.

Two blocks, |\text| and |\list|, can also be nested to produce, say,
multi-level lists. ZzTeX maintains the level counter automatically.

Each block type and level has its own design. The designs are
embodied in design macros in the design file. For example,
the name of the design macro for a second-level bullet list is
|\listbulletiidesign|. A design macro is essentially a list of
assignments to *parameters* that control the formatting of the
block's text.

There are two ways to modify the design of a specific block.
The first is to use a variant modifier, which produces predetermined
changes to the design. Try |~.facility; variants| for more information.
The second method is the |\with| modifier, which alters specified
design parameters for the block. Try |~.facility; \with| for
more information.
----
For a list of all the available blocks, try |~.facility; all blocks|.&/
For details on a specific block, try |~.facility; \*name*|.

.phrase all_blocks all blocks
.template
= List of Blocks

This is the list of all the block elements available in ZzTeX.

&= & Multiple& Can be& Used in
&= Block command& types?& nested?& ~.project; design?
----
~foreach blk, type_table;
& |~.blk;|& ~.type_table[blk];& ~.nest_table[blk];& ~.used_table[blk];
~end;
&.
----
For more information, try |~.facility; blocks|&/
For information on a particular block, try |~.facility; \*name*|

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_block <name> block
.synonym block <name>
.synonym <name> element
.synonym element <name>
.synonym <name> types
.synonym <nb-name>
.synonym <nb-name> blocks
.synonym <nb-name> elements
.synonym <nb-name> types
.synonym <nb-name-s>
.template
= |~.name;| Block

~include common_info;

~.comment;

The ~.name; block is one of the primary elements supported
by ZzTeX.

~if not used?;
This block is not used in the ~.project; book.
~elsif empty? level_table;
This block is used in the ~.project; book. 
A ~.name; does not have multiple design types. Its single
design is defined in ~.design_where;.
~else;
This table presents all the different
types of |~.name;| blocks available in the ~.project; design.

&= Type& Levels& Defined
----
~foreach type, level_table;
& |~.type;|& ~.level_table[type];& ~.where_table[type];
~end;
&.
~fi;
----
To see a description of this block's design parameters,
try |~.facility; ~.name; parameters|.&/
~if used?;~
To see some details about the |~.name;| design~* not empty? level_table; for the ~.project;
book, try |~.facility; ~.name; design|.&/~
~fi;
For more information about blocks in general, try |~.facility; blocks|.&/
For a list of all available blocks, try |~.facility; all blocks|.&/

.phrase block_params <name> parameters
.synonym <name>=\mathdisplay:$$ parameters
.synonym <name> design parameters
.synonym <name>=\mathdisplay:$$ design parameters
.template
= |~.name;| Block Design Parameters

Here is a list of all the design parameters for the |~.name;|
block.

&= Parameter& Type& Description
----
~foreach param, type_table;
& |~.param;|& ~.type_table[param];& ~.desc_table[param];
~end;
&.

// Block variants

.phrase block_variants block variants : text
.synonym variants
.synonym design variants
.template
= Block Variants

A block variant is a modifier that can be applied to a block
command to alter the design of the block. Variants may only
be applied to block commands.

For example, the |\widefigure| variant might be applicable
to a |\float| command to select a wider style for the figure.

  \widefigure \float{figure}

Often there is a group of variants that all vary the design
of a block is related ways. For example, in addition to
|\widefigure| we might have

* |\sidebysidefigure|
* |\widefigure|
* |\broadsidefigure|
*.

Each of these modifiers applies to a figure float and vary its
design in specific ways. The three variants are mutually exclusive:
only one may be specified on any given |\float| command.
----
For more information about a specific variant, try |~.facility; \*name*|.&/
To see a list of variants for a specific block, try |~.facility; \*block*|.

.phrase one_block_variant <name>
.synonym <name> variant
.synonym variant <name>
.synonym <name> block variant
.synonym block variant <name>
.synonym <name> design variant
.synonym design variant <name>
.template
= |~.name;| Block Variant

~include common_info;

~.comment;

A block variant is a modifier that can be applied to a block
command to alter the design of the block. This variant
applies to the |~.block;| block. It is a member of a group
of variants:

~foreach i, variant_list;
* |~.variant_list[i];|
~end;
*.

----
For more information on block variants, try |~.facility; variants|.

// Block modifiers

.phrase block_modifiers block modifiers
.synonym modifiers
.template
= Block Modifiers

A block modifier is a command that can be applied to a block
to alter the design of the block. Modifiers may only
be applied to block commands.

For example, the |\bottomfloat| modifier can be applied to
a |\float| command to place the float at the bottom of the page.

  \bottomfloat \float{figure}

Note that block variants are another type of block modifier.

Here is a list of all the block modifiers provided by ZzTeX and
the ~.project; design. It does not include block variants.

&= Modifier& Where defined
----
~foreach mod, where_table;
& |~.mod;|& ~.where_table[mod];
~end;
&.
----
For more information about a specific modifier, try |~.facility; \*name*|.&/
For more information on block variants, a type of modifier,
try |~.facility; variants|.

.phrase one_block_modifier <name>
.synonym <name> modifier
.synonym modifier <name>
.synonym <name> block modifier
.synonym block modifier <name>
.template
= |~.name;| Block Modifier

~include common_info;

~.comment;

A block modifier is a command that can be applied to a block
to alter the design of the block.
----
For more information on block modifiers, try |~.facility; modifiers|.

// Box registers

.phrase boxes box registers : text
.synonym boxes
.template
= Box Registers

A box register contains a box that has horizontal or vertical material
in it. A box can contain a paragraph, a vertical sequence of paragraphs,
a short text fragment for measuring, etc.

A box register is accessed and set as follows:

| \box \*name*
| \setbox \*name* = \hbox {*horizontal material*}
| \setbox \*name* = \vbox {*vertical material*}
| \setbox \*name* = \vtop {*vertical material*}

Boxes are never used directly in book files.
----
For a list of all boxes, try |~.facility; all boxes|.&/
For information on a particular box, try |~.facility; \*name*|

.phrase all_boxes all box registers
.synonym all boxes
.template
= List of Box Registers

This is the list of all box registers available in ZzTeX.

&= Register& Description
----
~foreach reg, reg_table;
& |~.reg;|& ~.reg_table[reg];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; boxes|

.phrase one_box <name>
.synonym <name> box
.synonym box <name>
.synonym <name> register
.synonym register <name>
.synonym <name> box register
.synonym box register <name>
.template
= |~.name;| Box Register

~include common_info;

~.comment;

Default: |~.default;|

A box register contains a box that has horizontal or vertical material
in it. A box can contain a paragraph, a vertical sequence of paragraphs,
a short text fragment for measuring, etc.
----
For more information, try |~.facility; boxes|

// Catcodes

.phrase catcodes catcodes
.synonym category codes
.synonym character categories
.synonym character category codes
.template
= Catcodes (Category Codes)

A category code is assigned to every character read by TeX as it
processes files. A character's category code determines how TeX handles
that character.

Here is a list of all the category codes.

&= Number& Name& Meaning (example)
----
~foreach i, name_table;
& ~.i;& |~.name_table[i];|& ~.meaning_table[i];
~end;
&.

.phrase one_catcode <name> 
.synonym <name> catcode
.synonym catcode <name>
.synonym <name> category code
.synonym category code <name>
.template
= |~.name;| Category Code

~include common_info;

~.comment;

Value: ~.value;

A category code is assigned to every character read by TeX as it
processes files. A character's category code determines how TeX handles
that character.
----
For more information and list of all catcodes, try |~.facility; catcodes|

// Characters

.phrase characters characters

.phrase one_character <name>
.synonym <name>=`T:tab
.synonym <name>=`F:formfeed
.synonym <name>=`R:newline
.synonym <name>=`_:space
.synonym <name>=":quote
.synonym <name>=%:percent
.synonym <name>=&:ampersand
.synonym <name>=':apostrophe
.synonym <name>=(:lparen
.synonym <name>=,:comma
.synonym <name>=<:less
.synonym <name>=>:greater
.synonym <name>=^:hat
.synonym <name>=`=:equal
.synonym <name>=``:backquote
.synonym <name>=|:bar
.template
= ~.name; Character

~include common_info;

~.comment;

& Catcode:& |~.catcode;|
& Font position:& |~.position;|
& Math class:& |~.math_class;|
& Math family:& |~.math_family;|
&.
----
For information on catcodes, try |~.facility; catcodes|.&/
For information on math classes, try |~.facility; classes|.&/
For information on math families, try |~.facility; families|.

// Citation commands

.phrase citations citations
.synonym citation commands
.template
= Citation Commands

A citation command is a command that accepts a bibliography item tag and produces
a citation (reference) to that item. For example

  As \citenoun{smith16} describes, the widget ...

might produce

& As Smith [2016] describes, the widget ...
&.

The following table lists all the citation commands available
for the ~.project; book. Be careful to read about the commands
defined in the design file (~.project;.zzd) first; some of
them might specify that certain other citation commands should
not be used.

&= Command& Defined
----
~foreach cmd, where_table;
& |~.cmd;|& ~.where_table[cmd];
~end;
&.

// Command line

.phrase command_line command line : text
.template
= Command Line

Some characters are difficult or impossible to specify on the
4NT/Take Command command line. The following table shows how to
specify such characters by themselves or as the second 
character of a character command.

& & How to Specify& How to Specify
& Character& Character& Character Command
----
& <newline>& |newline|& |\.newline|
& <formfeed>& |formfeed|& |\.formfeed|
& <space>& |space|& |\.space|
& |"|& |quote|& |\.quote|
& |%|& |percent|& |\.percent|
& |&&|& |ampersand|& |\.ampersand|
& |'|& |apostrophe|& |\.apostrophe|
& |(|& |lparen|& |\.lparen|
& |,|& |comma|& |\.comma|
& |<|& |less|& |\.less|
& |&=|& |equal|& |\.equal|
& |>|& |greater|& |\.greater|
& |^|& |hat|& |\.hat|
& |`|& |backquote|& |\.backquote|
& |&||& |bar|& |\.bar|
&.

// Commands

.phrase commands commands
.synonym macros
.template
= Commands

Commands are the primary entity with which TeX files are coded
to produce beautiful text. A command name consists of a backslash
(|\|) followed by

* A sequence of upper- and lowercase letters (e.g., |\sin|), or
* A single non-letter character (e.g., |\,|)
*.

Command names are *case-sensitive;* that is, an uppercase letter
is different from the same lowercase letter. So |\big| and |\Big|
are two different commands.

A command name can operate by itself or it can require *arguments,*
which are pieces of text that the command uses to perform its 
function. Arguments are usually enclosing in braces (|{|...|}|).
However, if there is a single argument composed of a single Roman
or Greek letter, then no braces are necessary.

  For example, you can set an acute accent on a character using
  braces, as in \'{a}, but the braces aren't necessary: \'a.

When scanning a command, TeX has one rule that can cause trouble.
Spaces and a single line break following a letter command are ignored.
So the text

  Don't you love the text that \TeX can produce?

will result in the following:

& Don't you love the text that TeXcan produce?
&.

There are two solutions, the first of which is preferred.

  Don't you love the text that \TeX\ can produce?
  Don't you love the text that \TeX{} can produce?

Command names containing an at-sign (|@|) or beginning with '|z|'
are internal to TeX and ZzTeX.
----
For information on a specific command, try |~.facility; \*name*|.&/
For information on the attributes item included with individual
command descriptions, try |~.facility; attributes|.&/
~include command_line_chars;

== Command Counts

For your edification, this table presents the number of commands
defined by TeX and ZzTeX.

&= Count& Origin of command
----
& ~.builtin_count;& Built-in TeX
& ~.plain_count;& Plain TeX macro package (many superceded by ZzTeX)
& ~.zztex_count;& ZzTeX macro package
& ~.zzd_count;& Design file(s)
&.

.phrase one_command <name>
.synonym <name>=\`R:\.newline
.synonym <name>=\`_:\.space
.synonym <name>=\":\.quote
.synonym <name>=\':\.apostrophe
.synonym <name>=\,:\.comma
.synonym <name>=\^:\.hat
.synonym <name>=\`=:\.equal
.synonym <name>=\``:\.backquote
.synonym <name>=\mathdisplay:$$
.synonym <name> command
.synonym <name>=\`R:\.newline command
.synonym <name>=\`_:\.space command
.synonym <name>=\":\.quote command
.synonym <name>=\':\.apostrophe command
.synonym <name>=\,:\.comma command
.synonym <name>=\^:\.hat command
.synonym <name>=\`=:\.equal command
.synonym <name>=\``:\.backquote command
.synonym command <name>
.synonym <name> macro
.synonym macro <name>
.template
= |~.name;| Command

~include common_info;

~.comment;
----
~include command_info;

// Count registers

.phrase counts count registers : text
.synonym counts
.template
= Count Registers

A count register contains an integer that can be used as a counter,
to number elements, to hold an integer parameter value, etc.

A count register is accessed and set as follows:

| \*name*
| \*name* = *integer*

Counts are rarely used directly in book files.
----
For a list of all count registers, try |~.facility; all counts|.&/
For information on a particular count register, try |~.facility; \*name*|.

.phrase all_counts all count registers
.synonym all counts
.template
= List of Count Registers

This is the list of all count registers available in ZzTeX.

&= Register& Description
----
~foreach reg, reg_table;
& |~.reg;|& ~.reg_table[reg];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; count registers|

.phrase one_count <name>
.synonym <name> count
.synonym count <name>
.synonym <name> register
.synonym register <name>
.synonym <name> count register
.synonym count register <name>
.template
= |~.name;| Count Register

~include common_info;

~.comment;

Default: |~.default;|

A count register contains an integer that can be used as a counter,
to number elements, to hold an integer parameter value, etc.
----
For more information, try |~.facility; counts|

// Declarations

.phrase declarations declarations : text
.template
= Declarations

A TeX declaration has a name like a command, but it does not
take any arguments. Instead, it pertains to the following text in
the current brace group.

Example: |{\it *text*}|

The *text* is set in italic style, but text following the close brace
is not. The braces limit the scope of the declaration.

Declarations are used in design files but rarely in book files.
There is almost always a command that should be used instead.

Example: |\emph{*text*}|
----
For information on commands, try |~.facility; commands|

.phrase one_declaration <name>
.synonym <name> declaration
.synonym declaration <name>

// Designs

.phrase designs designs : text
.synonym block designs
.template
= Block Designs

A block design is embodied in a macro usually located in a
book's design file. There are a few block designs built into
ZzTeX. The block design macro contains a list of block
parameter assignments that together specify the features
and format of the block.

The block design macro name comes in three flavors.

& |\def \footnotedesign|& The block does not have multiple types
& |\def \floatfiguredesign|& The block has multiple types
& |\def \listbulletidesign|& The block has multiple types and levels
&.

Within the design macro definition is a sequence of parameter
assignments and other TeX coding to establish the design for
that particular block, block type, or block type/level. Each
time ZzTeX encounters a block in a book file, it executes the
design macro to establish the design, then processes the contents
of the block.
----
To see details about a design, try things like:

| ~.facility; \listbulletidesign
| ~.facility; \float{figure}
| ~.facility; list bullet i

// The phrases for a block with no type; e.g., \footnotedesign.

.phrase one_design_notype <name>
.synonym <name> macro
.synonym <block> design
.synonym <block>=\mathdisplay:$$ design
.synonym <block> design macro
.synonym <nb-block> design
.synonym <nb-block> design macro
.template
= |~.name;| Design Macro

~include common_info;

~include design_info;

~.comment;
----
~include gory_details;

// The phrases for a block with a type, but no type specified.

.phrase-dups one_design_type_general <block> designs
.synonym <block> design macros
.synonym <nb-block> designs
.synonym <nb-block> design macros
.template
= |~.block;| Design Macros

The following table shows a list of all the design macros
available in the ~.project; book for the various types of |~.block;|.

&= Design Macro& Element
----
~foreach des, design_table;
& |~.des;|& ~.design_table[des];
~end;
&.
----
For information on a specific type, try |~.facility; ~.block; *type*|.

// The phrases for a block with a specified type.

.phrase one_design_type_specific <name>
.synonym <name> macro
.synonym <block> <type>
.synonym <block> <type> design
.synonym <block> <type> design macro
.synonym <nb-block> <type>
.synonym <nb-block> <type> design
.synonym <nb-block> <type> design macro
.synonym <type> <nb-block-s>
.synonym <type> <nb-block> designs
.synonym <type> <nb-block> design macros
.template
= |~.name;| Design Macro

~include common_info;

~include design_info;

~.comment;
----
~include gory_details;

// The phrases for a block with a type and level, but no type or level specified.

.phrase-dups one_design_level_general <block> designs
.synonym <block> design macros
.synonym <nb-block> designs
.synonym <nb-block> design macros
.synonym <block> <type> designs
.synonym <block> <type> design macros
.synonym <nb-block> <type> designs
.synonym <nb-block> <type> design macros
.synonym <type> <nb-block-s>
.synonym <type> <nb-block> designs
.synonym <type> <nb-block> design macros
.template
= |~.block;| Design Macros

The following table shows a list of all the design macros
available in the ~.project; book for the various types of |~.block;|.

&= Design Macro& Element
----
~foreach des, design_table;
& |~.des;|& ~.design_table[des];
~end;
&.
----
For information on a specific type and level,
try |~.facility; ~.block; *type* *level*|.

// The phrases for a block with a specified type and level.

.phrase one_design_level_specific <name>
.synonym <name> macro
.synonym <block> <type> <level>
.synonym <block> <type> <level> design
.synonym <block> <type> <level> design macro
.synonym <nb-block> <type> <level>
.synonym <nb-block> <type> <level> design
.synonym <nb-block> <type> <level> design macro
.template
= |~.name;| Design Macro

~include common_info;

~include design_info;

~.comment;
----
~include gory_details;

.phrase design_details <name> details
.template
= ~.name; Design Details

~include common_info;

~include design_info;

~if not empty? inblock_set;
The design is modified when the block appears inside these surrounding blocks:
~foreach blk,inblock_set,iter;~,blk,iter /= 1;~end;
~fi;

Here is a table of all the parameter values set by this design macro.

&= Parameter& Type& Value& Note
----
~foreach param, type_table;
& |~.param;|& ~.type_table[param];& |~.value_table[param];|& ~.note_table[param];
~end;
&.

~if affected?;
(Some parameters may be missing due to design changes caused by variants
or nesting inside outer blocks.)
~fi;
----
For the complete story on this design, see ~.where;.

// Dimen registers

.phrase dimens dimension registers : text
.synonym dimensions
.template
= Dimen(sion) Registers

A dimen register contains a dimension that can be used as the width,
height, or depth of a box, an indentation amount, a page dimension, etc.

A dimen register is accessed and set as follows:

| \*name*
| \*name* = *dimension*

Dimensions are rarely used directly in book files.
----
For a list of all dimen registers, try |~.facility; all dimens|.&/
For information on a particular dimen register, try |~.facility; \*name*|.

.phrase all_dimens all dimension registers
.synonym all dimensions
.template
= List of Dimen(sion) Registers

This is the list of all dimen registers available in ZzTeX.

&= Register& Description
----
~foreach reg, reg_table;
& |~.reg;|& ~.reg_table[reg];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; dimen registers|

.phrase one_dimen <name>
.synonym <name> dimension
.synonym dimension <name>
.synonym <name> register
.synonym register <name>
.synonym <name> dimension register
.synonym dimension register <name>
.template
= |~.name;| Dimen(sion) Register

~include common_info;

~.comment;

Default: |~.default;|

A dimen(sion) register contains a dimension that can be used as the width,
height, or depth of a box, an indentation amount, a page dimension, etc.
----
For more information, try |~.facility; dimens|

// Encodings

.phrase encodings style encodings
.synonym encodings
.synonym font encodings
.template
= Style Encodings

A style encoding is an integer value that specifies the overall organization
of the fonts associated with that style. For example:

* \encoderoman is the encoding for typical Roman text fonts.
* \encodeitalic is the encoding for typical italic text fonts.
* \encodemathitalic is the encoding for math fonts containing
italic letters for use as variables.
*.

The encoding for a type style is specified in the |\definetypestyle|
command for that style.

Here are all the style encodings supported by ZzTeX.

&= Encoding& Value& Meaning
----
~foreach val, value_set;
& ~.encoding_table[val];& ~.val;& ~.meaning_table[val];
~end;
&.
----
For a list of type styles and their encodings, try |~.facility; type styles|.

.phrase one_encoding <name> 
.synonym <name> encoding
.synonym encoding <name>
.synonym <name> style encoding
.synonym style encoding <name>
.synonym <name> font encoding
.synonym font encoding <name>
.template
= |~.name;| Style Encoding

~include common_info;

~.comment;

Value: ~.value;

A style encoding is an integer value that specifies the overall organization
of the fonts associated with that style.
----
For more information and list of all encodings, try |~.facility; style encodings|

// End-of-enunciation dingbats

.phrase eoe_dingbats end-of-enunciation dingbats : text
.synonym dingbats
.synonym eoe dingbats
.synonym enunciation dingbats
.template
= End-of-Enunciation Dingbats

An end-of-enunciation dingbat (eoe dingbat) is an icon that is set
at the end of an enunciation. A mathemtical proof, for example, almost
always has a dingbat at the end. The command for the dingbat would be
|\qed|.

The dingbat is set automatically at the end of the enunciation, or you
can specify it explicitly using its command name.
----
For information on a specific dingbat, try |~.facility; \*name*|

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_eoe_dingbat <name> dingbat
.synonym dingbat <name>
.synonym <name> eoe dingbat
.synonym eoe dingbat <name>
.synonym <name> enunciation dingbat
.synonym enunciation dingbat <name>
.synonym <name> end-of-enunciation dingbat
.synonym end-of-enunciation dingbat <name>
.template
= |~.name;| End-of-Enunciation Dingbat Command

~include common_info;

~.comment;

& Text of dingbat:& |~.text;|
& Position:& |~.position;|
&.

An end-of-enunciation dingbat (eoe dingbat) is an icon that is set
at the end of an enunciation.
----
For information on dingbats in general, try |~.facility; dingbats|

// Enumerated Names

.phrase one_chardef_enum <name>
.template
= ~.name; Symbolic Number

~include common_info;

~.comment;

Value: ~.value;

A symbolic number is a name assigned to a number to make it easier
to refer to the number without having to remember its value. A symbolic
number is often referred to as an *enumerated value.*

~include internal_note;

// Flags

.phrase flags flags : text
.synonym booleans
.template
= Flags

A flag is a true/false (boolean) value stored in a TeX macro
(not a register). It can be used to specify a yes/no option,
the state of some binary choice, the result of a test, etc.

A flag is accessed and set as follows:

| \*name*
| \setflag \*name* = \true
| \setflag \*name* = \false

Flags are rarely used directly in book files.
----
For a list of all flags, try |~.facility; all flags|.&/
For information on a particular flag, try |~.facility; \*name*|.

.phrase all_flags all flags
.synonym all booleans
.template
= List of Flags

This is the list of all flags available in ZzTeX.

&= Name& Description
----
~foreach flag, flag_table;
& |~.flag;|& ~.flag_table[flag];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; flags|

.phrase one_flag <name>
.synonym <name> flag
.synonym flag <name>
.synonym <name> boolean
.synonym boolean <name>
.template
= |~.name;| Flag

~include common_info;

~.comment;

Default: |~.default;|

A flag is a true/false (boolean) value stored in a TeX macro
(not a register). It can be used to specify a yes/no option,
the state of some binary choice, the result of a test, etc.
----
For more information, try |~.facility; flags|

// Fonts

.phrase fonts fonts : text
.synonym type fonts
.template
= Font Declarations

A font declaration establishes the type font for the current brace
group. In TeX, a font is a specific type family and style set at a
particular size. Some common examples:

&= Font Declaration& Family, Style, Size
----
& |\tenhalfrm|& morg at 10.5pt& (|morg| is Minion-Regular)
& |\tenhalfmit|& mtmiz at 10.5pt& (|mtmiz| is MathTime Math Italic)
& |\tenhalfit|& moi at 10.5pt& (|moi| is Minion-Italic)
& |\twelvedbf|& Flama-Bold at 12pt
&.

Font declarations are never used directly in design or book files, instead
operating behind the scenes when font sizes and styles are selected.
----
For a list of all fonts in the ~.project; book, try |~.facility; all fonts|.&/
For information about a particular font, try |~.facility; \*name*|.&/
For information on type sizes or styles, try |~.facility; sizes| or
|~.facility; styles|.

.phrase all_fonts all fonts
.template
= List of Fonts

This is the list of all the fonts used in the ~.project; book.

&= Fonts& Family, style, size
----
~foreach font, font_table;
& |~.font;|& ~.font_table[font];
~end;
&.
----
For more information, try |~.facility; fonts|.

// (Assumes that the 'one_declaration' group will also be populated.)
.phrase one_font <name> font
.synonym font <name>
.synonym <name> type font
.synonym type font <name>
.template
= |~.name;| Font Declaration

~include common_info;

Font: ~.font_size;.

A font declaration establishes the type font for the current brace group.
Font declarations are never used directly in design or book files, instead
operating behind the scenes when font sizes or styles are selected.
----
For more information on fonts, try |~.facility; fonts|.&/
~include declaration_info;

// Glyphs

.phrase glyphs glyphs

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_glyph <name> glyph
.synonym glyph <name>
.template
= |~.name;| Glyph Command

~include common_info;

~.comment;

Art spec: ~.art_spec;

A glyph is a command that sets a small graphic used as an icon
or attention indicator. The glyph scales with the surrounding font.

// Ifs

.phrase ifs ifs : text
.synonym if flags
.template
= If Flags

An if flag is similar to ZzTeX's flags but is only used by Plain
TeX. Because all the if flags are internal to Plain TeX and
never used in design or book files, no more information will
be provided.

// Inserts

.phrase inserts inserts : text
.template
= Inserts

An insert is one or more chunks of text that are to be inserted on
the page at the top or bottom. Examples are floating figures, 
floating tables, and footnotes.

ZzTeX defines an insert for floats at the top of the page,
floats at the bottom, and footnotes. Each insert consist of
three registers needed to manage the text: a count, a dimen,
and a skip.

Since the operation of inserts is entirely internal, there is no
additional information about them.

// Lets

.phrase one_let <name>
.synonym <name>=\%:\.percent
.synonym <name>=\&:\.ampersand
.synonym <name>=\<:\.less
.synonym <name>=\>:\.greater
.synonym <name> synonym
.synonym <name>=\&:\.ampersand synonym
.synonym <name>=\%:\.percent synonym
.synonym <name>=\<:\.less synonym
.synonym <name>=\>:\.greater synonym
.synonym synonym <name>
.template
= |~.name;| Synonym

~include common_info;

Synonym for: |~.parent;|

~.comment;

A synonym is a name established with the |\let| command and is
equivalent to its "parent" command. To see information on this name's
parent command, try |~.facility; ~.parent;|.

// Locators

.phrase locators locators
.synonym indexing commands
.synonym indexing locators
.template
= Index Locators

An index locator is a command that creates an entry in the
book's index. It takes an argument with one, two, or three headings
separated by bars:

  \xpage{Main|subhead}

Some locators can specify a page range, in which case there are
two additional commands:

  \xpagebegin{Main|subhead}
  \xpageend{Main|subhead}

If it is a command like |\xsee| and |\xseealso|, it takes an additional
first argument with the heading to consult. In this example, the heading
|Synonym| will refer to the heading |Primary|:

  \xsee{Primary}{Synonym}

The following locators are available for the ~.project; book:

&= & Begin/end& See-like
&= Command& commands?& reference?
----
~foreach i, command_list;
& |~.command_list[i];|& ~.range_list[i];& ~.refers_list[i];
~end;
&.
----
~include indexing_info;

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_locator <name> locator
.synonym locator <name>
.synonym <name> indexer
.synonym indexer <name>
.synonym <name> indexing command
.synonym indexing command <name>
.synonym <name> locator command
.synonym locator command <name>
.template
= |~.name;| Index Locator Command

~include common_info;

~.comment;

An index locator is a command that creates an entry in the book's index.
The format of this locator command is shown above. There is one command
if this kind of locator can only specify a single page. There are three 
commands if it can specify a single page or a page range. The commands for
this locator are:

~foreach cmd, command_list;
* ~.command_list[cmd];
~end;
*.
----
For more information on locators, try |~.facility; locators|.

// Marks

.phrase marks marks
.synonym page marks
.template
= Mark Pseudo-Commands

A mark is a chunk of text inserted into the current page using the
|\mark| command. The purpose of a mark is to hold information
for running heads and feet. This information can be extracted from
the page using pseudo-commands such as |\topmark| in the header
and footer formatting macros.

The |\mark| command and the extracting pseudo-commands are not used
directly in ZzTeX design or book files. Instead, |\setmarkinfo| and
|\markinfo| are used.

Here is a list of all the mark pseudo-commands.

&= Command& Description
----
~foreach mark, desc_table;
& |~.mark;|& ~.desc_table[mark];
~end;
&.

(Do not confuse marks with markers.)
----
For information on a specific mark, try |~.facility; \*name*|.

.phrase one_mark <name>
.synonym <name> mark
.synonym mark <name>
.synonym <name> page mark
.synonym page mark <name>
.template
= |~.name;| Mark Pseudo-Command

~include common_info;

~.comment;

A mark is a chunk of text inserted into the current page using the
|\mark| command. The purpose of a mark is to hold information
for running heads and feet.
----
For more information on marks, try |~.facility; marks|.

// Markers

.phrase markers markers
.synonym argument markers
.synonym command markers
.template
= Markers

A marker indicates a point in a command argument where the following
text is interpreted differently from the preceding text. For example,

  $$
  a = b \eqno
  $$

The |\eqno| marker indicates that the following text (empty in this
example) should be interpreted as the equation number.

Here is a list of all the markers provided by ZzTeX.

&= Marker& Meaning
----
~foreach marker, comment_table;
& |~.marker;|& ~.comment_table[marker];
~end;
&.

(Do not confuse markers with marks.)
----
For information on a specific marker, try |~.facility; \*name*|.

.phrase one_marker <name>
.synonym <name> marker
.synonym marker <name>
.template
= |~.name;| Marker

~include common_info;

~.comment;

A marker indicates a point in a command argument where the following
text is interpreted differently from the preceding text.
----
For more information on markers, try |~.facility; markers|.

// Math accents

.phrase math_accents math accents
.template
= Math Accent Commands

A math accent command produces an accent over a math character.
For example,

  x = y \times \hat{a}

produces

& *x* = *y* &times; *&acirc;*
&.

Here is a list of all the math accent commands.

&= Command& Description
----
~foreach acc, accent_table;
& |~.acc;|& ~.accent_table[acc];
~end;
&.
~include internal_note;
----
For information on a specific accent, try |~.facility; \*name*|.

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_math_accent <name> accent
.synonym accent <name>
.synonym <name> math accent
.synonym math accent <name>
.template
= |~.name;| Math Accent Command

~include common_info;

~.comment;

A math accent command produces an accent over a math character.
----
For a list of all math accents, try |~.facility; math accents|.

// Math characters

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_math_char <name> character
.synonym character <name>
.synonym <name> symbol
.synonym symbol <name>
.synonym <name> math character
.synonym math character <name>
.synonym <name> math symbol
.synonym math symbol <name>
.template
= |~.name;| Math Character

~include common_info;

~.comment;

This command sets a math character or symbol with the following properties.

& Math class:& |~.math_class;|
& Math family:& |~.math_family;|
& Font position:& ~.position;
&.

// Math character constants

.phrase one_math_char_constant <name>

// Math classes

.phrase math_classes math classes
.synonym classes
.template
= Math Classes

Each math character and subexpression is assigned to one of the
math classes shown below. The class determines how the character or
subexpression is formatted. In particular, it determines the amount
of space on each side of it. Each class is assigned a number, although
you never need to worry about them.

You can force a math expression into a particular class using the 
commands in the following table. Each takes an argument that is
the expression to be classified. For example:

  x \mathbin{.} y

This forces the period to act like a binary operator, thus being set
with a thin space on either side of it.

&= Class& Number& Class Command& Description
----
~foreach i, class_list;
& |~.class_list[i];|& ~.i;& |~.command_list[i];|& ~.desc_list[i];
~end;
&.

.phrase one_chardef_math_class <name>
.synonym <name> math class
.synonym math class <name>
.synonym <name> class
.synonym class <name>
.template
= |~.name;| Math Class

~include common_info;

~.comment;

Value: ~.value;

Each math character and subexpression is assigned to a math class.
The class determines how the character or subexpression is formatted.
----
For more information and list of all math classes, try |~.facility; math classes|.

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_command_math_class <name> math class
.synonym math class <name>
.synonym <name> class
.synonym class <name>
.template
= |~.name;| Math Class Command

~include common_info;

~.comment;

A math class command forces its argument to be interpreted
according to a particular math class (specified above) rather than its standard
math class.
----
For more information on math classes, try |~.facility; math classes|.&/
~include command_info;

// Math families

.phrase math_families math families : text
.synonym family
.synonym families
.synonym type family
.synonym type families
.template
= Math Families

A math family is a number that is assigned to a type style so the
style can be used in math expressions. Associated with the family
are three fonts, one each for text size, script size, and scriptscript
size. A type style cannot be used in math without a family number.
This is occasionally a problem because there is a limit of 15 families.
----
For information about a particular family, try |~.facility; \*xx*fam|;
for example, |~.facility; \rmfam|&/
For a list of type styles and their associated families,
try |~.facility; type styles|.

.phrase one_math_family <name>
.synonym family <name>
.synonym <name> family
.synonym <name> math family
.synonym <name> type family
.synonym math family <name>
.synonym type family <name>
.template
= |~.name;| Math Family

~include common_info;

~.comment;

& Type style:& |~.style;|
& Family number:& ~.number;
&.

A math family is a number assigned to a type style so the style
can be used in math expressions. Only families 0--14 are usable
in math.
----
For more information on math families, try |~.facility; math families|

// Math functions

.phrase math_functions math functions : text
.synonym functions
.template
= Math Functions

Math functions are commands that set the names of mathematical functions
such as sin and max. If the command is followed by a fence, the fence
abuts the name. Otherwise a thin space follows the name. For example,

  ... the $\sin x$ and the $\sin(x)$ are both ways of writing ...

produces

& ... the sin&thinsp;*x* and the sin(*x*) are both ways of writing ...
&.
----
For information on a specific function, try |~.facility; \*name*|

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_math_function <name> function
.synonym function <name>
.synonym <name> math function
.synonym math function <name>
.template
= |~.name;| Math Function

~include common_info;

~.comment;

& Sets:& ~.function;
& Limits:& ~.limits;
&.

A math function is a command that sets a math function name,
usually in roman.
----
For more information, try |~.facility; math functions|

// Math joined symbols

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_math_joined <name> joined math symbol
.synonym joined math symbol <name>
.synonym <name> joined symbol
.synonym joined symbol <name>
.synonym <name> math symbol
.synonym math symbol <name>
.template
= |~.name;| Joined Math Symbol

~include common_info;

~.comment;

A joined math symbol is constructed by adjoining one symbol
with another. In this case, the symbol is built as:

  ~.left; ~.right;
----
~include math_class_info;

// Math stacked symbols

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_math_stacked <name> stacked math symbol
.synonym stacked math symbol <name>
.synonym <name> stacked symbol
.synonym stacked symbol <name>
.synonym <name> math symbol
.synonym math symbol <name>
.template
= |~.name;| Stacked Math Symbol

~include common_info;

~.comment;

A stacked math symbol is constructed by stacking one symbol
on top of another. In this case, the symbol is built as:

  ~.above;
  ~.below;
----
~include math_class_info;

// Muskip registers

.phrase muskips muskip registers : text
.synonym muskips
.template
= Muskip Registers

A muskip register contains a glue value (nominal, stretch, shrink)
measured in math mu units (1/18 em). It can specify a horizontal space
to be used in math. Muskip registers are only used in math.

A muskip register is accessed and set as follows:

| \*name*
| \*name* = *mu-glue*

Muskip registers are never used directly in book files.
----
For a list of all muskip registers, try |~.facility; all muskips|.&/
For information on a particular muskip register, try |~.facility; \*name*|.

.phrase all_muskips all muskip registers
.synonym all muskips
.template
= List of Muskip Registers

This is the list of all muskip registers available in ZzTeX.

&= Register& Description
----
~foreach reg, reg_table;
& |~.reg;|& ~.reg_table[reg];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; muskip registers|

.phrase one_muskip <name>
.synonym <name> muskip
.synonym muskip <name>
.synonym <name> register
.synonym register <name>
.synonym <name> muskip register
.synonym muskip register <name>
.template
= |~.name;| Muskip Register

~include common_info;

~.comment;

Default: |~.default;|

A muskip register contains a glue value (nominal, stretch, shrink)
measured in math mu units (1/18 em). It can specify a horizontal space
to be used in math.
----
For more information, try |~.facility; muskips|

// Math \text command

.phrase math_text math \text : text
.template
= Math |\text| Command

There is a |\text| command that can be used in math expressions
to typeset its argument in text mode.

Usage: |\text{*text*}|

For example,

  $$
  x = 0.999\ldots = 1\quad \text{(see limits description)}
  $$

This math display would be set as follows.

& *x*&thinsp;=&thinsp;0.999...&thinsp;=&thinsp;1&_(see limits description)
&.

Note that this |\text| command is only defined in math mode.

// Named Characters

.phrase one_named_char <name>
.synonym <name>=\|:\.bar
.synonym <name> character
.synonym <name>=\|:\.bar character
.synonym character <name>
.template
= ~.name; Named Character

~include common_info;

~.comment;

Font position: |~.position;|

A named character is a single character that is not on the keyboard but is
assigned a name so that it can be easily typed. Some named characters also
have a character command synonym (e.g., |\@| = |\atsign|).

// Page make-up

.phrase page_makeup page make-up
.synonym page makeup
.synonym paging
.template
= Page Make-Up

Page make-up is the process of formatting the text on each
page of a book. In particular, it involves deciding what
text should appear on each page and on each spread.

The following ZzTeX commands can help with page make-up.

~foreach name, makeup_set;
* |~.name;|
~end;
*.

// Penalties

.phrase penalties penalties
.synonym penalty
.template
= Penalties

A penalty is a number that specifies how much TeX should favor or
disfavor a line break or page break. Positive penalties cause TeX
to disfavor breaks, while negative penalties cause it to favor breaks.
Penalties range from -10,000 (meaning always break) to +10,000 (meaning
never break).

Penalties are used in commands such as |\vpenalty|, |\linebreak|, and
|\columnbreak|. These commands are rarely used in book files.

Here is a table of all the available penalties.

&= Penalty& Meaning
----
~foreach name, comment_table;
& |~.name;|& ~.comment_table[name];
~end;
&.

.phrase one_penalty <name>
.synonym <name> penalty
.synonym penalty <name>
.template
= |~.name;| Penalty

~include common_info;

~.comment;
----
For more information, try |~.facility; penalties|.

// Prefixes

.phrase prefixes prefixes
.synonym command prefixes
.template
= Prefixes

A prefix specifies an attribute of the name being defined
using |\def| and related commands. It also specifies an
attribute of I/O operations.

Here is a list of all the prefixes.

&= Prefix& Description
----
~foreach pre, prefix_table;
& |~.pre;|& ~.prefix_table[pre];
~end;
&.

.phrase one_prefix <name>
.synonym <name> prefix
.synonym prefix <name>
.synonym <name> command prefix
.synonym command prefix <name>
.template
= |~.name;| Prefix

~include common_info;

~.comment;

A prefix specifies an attribute of the name being defined
using |\def| and related commands. It also specifies an
attribute of I/O operations.
----
For more information, try |~.facility; prefixes|.

// Skip (Glue) registers

.phrase skips skip registers : text
.synonym skips
.synonym glue registers
.synonym glues
.template
= Skip Registers

A skip register contains a glue value (nominal, stretch, shrink)
that can specify a horizontal or vertical space, a left or right
indentation, a gutter, etc.

A skip register is accessed and set as follows:

| \*name*
| \*name* = *glue*

Skip registers are never used directly in book files.
----
For a list of all skip registers, try |~.facility; all skips|.&/
For information on a particular skip register, try |~.facility; \*name*|.

.phrase all_skips all skip registers
.synonym all skips
.synonym all glue registers
.template
= List of Skip (Glue) Registers

This is the list of all skip registers available in ZzTeX.

&= Register& Description
----
~foreach reg, reg_table;
& |~.reg;|& ~.reg_table[reg];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; skip registers|

.phrase one_skip <name>
.synonym <name> skip
.synonym skip <name>
.synonym <name> register
.synonym register <name>
.synonym <name> skip register
.synonym skip register <name>

.synonym <name> glue
.synonym glue <name>
.synonym <name> glue register
.synonym glue register <name>
.template
= |~.name;| Skip (Glue) Register

~include common_info;

~.comment;

Default: |~.default;|

A skip register contains a glue value (nominal, stretch, shrink)
that can specify a horizontal or vertical space, a left or right
indentation, a gutter, etc.
----
For more information, try |~.facility; skips|

// Spacing

.phrase spacing spacing : text
.template
= Spacing Commands

To see a list of commands for horizontal spacing,
try |~.facility; horizontal spacing|.

To see a list of commands for vertical spacing,
try |~.facility; vertical spacing|.

.phrase horizontal_spacing horizontal spacing
.template
= Horizontal Spacing

This table presents a list of all the horizontal spacing commands
available in ZzTeX.

A command described as *breakable* allows a preceding line break, and the
space is discarded. A command described as *unbreakable* does not allow a
preceding line break.

~foreach cmd, comment_table;
& |~.cmd;|& ~.comment_table[cmd];
~end;
&.
----
For more information on any of these commands, try |~.facility; \*name*|.

.phrase vertical_spacing vertical spacing
.template
= Vertical Spacing

Here is a list of all the vertical spacing commands available in ZzTeX.

~foreach name, name_set;
* |~.name;|
~end;
*.
----
For more information on any of these commands, try |~.facility; \*name*|.

// Suffixes

.phrase suffixes suffixes
.synonym command suffixes
.template
= Suffixes

A suffix can be affixed to certain math commands to specify
how limits are to be set.

Here is a list of all the suffixes.

&= Suffix& Description
----
~foreach suf, suffix_table;
& |~.suf;|& ~.suffix_table[suf];
~end;
&.

.phrase one_suffix <name>
.synonym <name> suffix
.synonym suffix <name>
.synonym <name> command suffix
.synonym command suffix <name>
.template
= |~.name;| Suffix

~include common_info;

~.comment;

A suffix can be affixed to certain math commands to specify
how limits are to be set.
----
For more information, try |~.facility; suffixes|.

// Titles

.phrase titles titles
.synonym heads
.synonym adjustments
.synonym head adjustments
.synonym title adjustments
.template
= Titles and Their Adjustment

A *title* or *head* appears in various ZzTeX commands, including
hierarchy commands such as |\chapter| and |\section|, captions,
enunciations, etc. Each of these commands takes an argument that
specifies the text of the title.

| \chapter{*title-text*}

The title text can appear in various places:

* In the body of the text at the position of the |\chapter| command.
* In the running heads or feet of multiple pages.
* In the main table of contents or a "mini-ToC" such as might
appear at the beginning of each chapter.
*.

Sometimes it is necessary to modify the title slightly when it appears in 
these various places. For example, if a title has a footnote, that footnote
does not want to appear in the running head or table of contents. ZzTeX
provides the following commands that can be used within the text of a title
to make such adjustments.

~foreach cmd, command_set;
* |~.cmd;|
~end;
*.

// Toks registers

.phrase toks toks registers : text
.synonym toks
.synonym tokens
.synonym token registers
.template
= Toks (Token) Registers

A toks (token) register contains a sequence of TeX tokens (characters, commands,
spaces, etc.) that can specify a text fragment, file name, tag, options
list, etc.

A toks register is accessed and set as follows:

| \*name*
| \*name* = {*tokens*}

Toks registers are never used directly in book files.
----
For a list of all toks registers, try |~.facility; all toks|.&/
For information on a particular toks register, try |~.facility; \*name*|.

.phrase all_toks all toks registers
.synonym all toks
.synonym all token registers
.synonym all tokens
.template
= List of Toks (Token) Registers

This is the list of all toks registers available in ZzTeX.

&= Register& Description
----
~foreach reg, reg_table;
& |~.reg;|& ~.reg_table[reg];
~end;
&.
~include internal_note;
----
For more information, try |~.facility; toks registers|

.phrase one_toks <name>
.synonym <name> toks
.synonym toks <name>
.synonym <name> register
.synonym register <name>
.synonym <name> toks register
.synonym toks register <name>

.synonym <name> token
.synonym token <name>
.synonym <name> token register
.synonym token register <name>
.template
= |~.name;| Toks (Token) Register

~include common_info;

~.comment;

Default: |~.default;|

A toks register contains a sequence of TeX tokens (characters, commands,
spaces, etc.) that can specify a text fragment, file name, tag, options
list, etc.
----
For more information, try |~.facility; toks|

// Style relations

.phrase style_relations style relations
.synonym relations
.synonym font relations
.synonym type relations
.template
= Style Relation Commands

A style relation is a command that selects a new type style for
its argument text based on the prevailing type style. The argument text
is set in the new style and then the prevailing style continues.
For example,

| *...* a set of \emph{dependencies} on parent structures *...*

might typeset the text as

& *...* a set of *dependencies* on parent structures *...*
&.

Style relation commands are used instead of the underlying type
style declarations (e.g., |\it|) for various reasons, the most
important one being that the style change is restricted to the
argument text.

Here is a list of the relation commands available for the ~.project;
book. For more details about a particular relation, try |~.facility;
\*name*|.

&= Relation& Where defined
----
~foreach rel, relation_table;
& |~.rel;|& ~.relation_table[rel];
~end;
&.

*Note:* The |\mono| command is used like a relation, but it is
actually just a normal command.
----
~include command_info;

// (Assumes that the 'one_command' group will also be populated.)
.phrase one_style_relation relation <name>
.synonym <name> relation
.synonym <name> font relation
.synonym <name> style relation
.synonym <name> type relation
.synonym font relation <name>
.synonym style relation <name>
.synonym type relation <name>
.template
= |~.name;| Style Relation Command

~include common_info;

~.comment;

A style relation is a command that selects a new type style for
its argument based on the prevailing type style. The argument text
is set in the new style and then the prevailing style continues.

Here is a table of all the relationships established by this command.

&= Prevailing& & New
&= style& & style
----
~foreach sty, style_map;
& ~.sty;& &rArr;& ~.style_map[sty];
~end;
&.
----
For more information on style relations and a list of all available
relations, try |~.facility; style relations|.&/
~include command_info;

// Tags

.phrase tags tags : text
.template
= Tags

A tag is a TeX name that is used to store information about a particular
spot in a book. You can tag a spot using the |\tag| command.

  \section{All About Tags}
  \tag{S:about-tags}

The following information is associated with the tag |S:about-tags|:

* The page number on which the tag is defined.

* The composite number text of the enclosing element (in the above example, 
the section number).

* The title or caption of the enclosing element.
*.

The following cross-referencing commands can be used to typeset the
information asociated with a tag:

& |\ref{*tag*}|& Set the composite number text.
& |\refpage{*tag*}|& Set the page number.
& |\reftitle{*tag*}|& Set the title (rarely used).
&.

If the |\tag| command is used at a point in the text where there is 
no surrounding taggable element, an error message is produced. In this
situation, if you only want to reference the page number, use the |\tagpageonly|
command instead.

== Tag Names

If you need to add a tag to a book, please follow the naming conventions
chosen by the author. If the author was haphazard, use the following
prefixes on tags of various kinds:

&= Prefix& Meaning
----
& |A:|& appendix
& |C:|& chapter or quasichapter
& |E:|& equation
& |F:|& figure
& |I:|& list item
& |P:|& page number of arbitrary text (with |\tagpageonly|)
& |S:|& section, subsection, etc.
& |T:|& table
& |X:|& exercise
&.

Tags names beginning with |z*X*:|, where *X* is a capital letter, are
internal to ZzTeX. For a description of these internal tags,
try |~.facility; internal tags|.
----
To obtain a list of all the tags in the ~.project; book, try
|~.facility; all tags|.

.phrase internal_tags internal tags : text
.template
= Internal Tags

Here is a list of all the internal tags used by ZzTeX.

&= Tag prefix& Usage
----
& |zB:|& Bibliographic entry information.
& |zE:|& Page number of frame element.
& |zF:|& Page number of float element.
& |zH:|& Error message help text.
& |zM:|& Page number of marginnote element.
& |zP:|& Page number of proofnote element.
& |zR:|& Page number of marginrule element.
& |zS:|& Composite cross-reference snapshot information.
&.
----
For a description of tags in general, try |~.facility; tags|.

// Type styles

.phrase type_styles type styles
.synonym styles
.synonym font styles
.template
= Type Styles

A type style is a declaration that establishes the current style for
text (e.g., roman, italic). As with all declarations, it pertains only
to the following text in the current brace group.

Type styles are rarely used directly in book files. Instead, the current
style is established using a style relation command such as |\emph| or
|\bold|. To see a list of all the relation commands, try |~.facility;
type relations|. To see a list for a particular style, along with
information about that style, try |~.facility; \*style*|.

Here are all the type styles available for the ~.project; book.
&= & & Family& Family& Usable
&= Style& Encoding& number& name& in math?
----
~foreach fam, family_list;
& |~.style_list[fam];|& |~.encoding_list[fam];|& ~.fam;& |~.family_list[fam];|&
~.math_list[fam];
~end;
&.
----
For information on encodings, try |~.facility; encodings|.&/
~include declaration_info;

// (Assumes that the 'one_declaration' group will also be populated.)
.phrase one_type_style type style <name>
.synonym <name> style
.synonym style <name>
.synonym <name> font style
.synonym font style <name>
.template
= |~.name;| Type Style Declaration

~include common_info;

~.comment;

A type style is a declaration that establishes the current style for
text (e.g., roman, italic). Instead of using the style declaration,
you should use a style relation command. Here are the style relations
pertinent to this style.

&= Current style& Relation& New style
----
~foreach rel, new_style;
& |~.name;|& |~.rel;|& |~.new_style[rel];|
~end;
&.
----
For more information on type styles, try |~.facility; type styles|&/
For more information on type relations, try |~.facility; type relations|

// Type sizes

.phrase type_sizes type sizes : text
.synonym sizes
.synonym font sizes
.template
= Type Sizes

A type size is a declaration that establishes the current size
for text. As with all declarations, it pertains only
to the following text in the current brace group.

When a type size is established, there is no current style
for the subsequent text. You must also establish a style
after establishing a size.

  {\footnotesize\it That '\it' command was necessary
   to establish the style.}

Type sizes are rarely used directly in book files. Instead, the
surrounding element (typically a block) establishes the size
for the text in that element. The main text size is always called
|\textsize|.
----
To see a list of all the available type sizes, try |~.facility; all sizes|.&/
To see the details of a particular size, try |~.facility; \*name*|.

.phrase all_type_sizes all type sizes
.synonym all sizes
.synonym all font sizes
.template
= List of Type Sizes

This is the list of all type sizes available in the ~.project; book.

&= Size declaration& Available styles
----
~foreach size, style_table;
& |~.size;|& |~.style_table[size];|
~end;
&.
----
For more information, try |~.facility; type sizes|.&/
To see the details of a particular size, try |~.facility; \*name*|.

// (Assumes that the 'one_declaration' group will also be populated.)
.phrase one_type_size size <name>
.synonym <name> size
.synonym <name> type size
.synonym type size <name>
.synonym <name> font size
.synonym font size <name>
.template
= |~.name;| Type Size Declaration

~include common_info;

~.comment;

A type size is a declaration that establishes the current size
for text. As with all declarations, it pertains only
to the following text in the current brace group.

Here is a list of all the type styles available in |~.name;|.

&= & Can use& Can use
&= Style& in math?& in scripts?& Family, style, size
----
~foreach i, style_list;
& |~.style_list[i];|& ~.math_list[i];& ~.script_list[i];& ~.font_list[i];
~end;
&.
----
For more information on type sizes, try |~.facility; type sizes|.&/
To see a list of all the available type sizes, try |~.facility; all sizes|.

//                      Composite Cross-Reference Phrases
//                      --------- --------------- -------


.phrase all_art_files all art files
.synonym art files
.template
= List of All Art Files for ~.project;

This is a list of all the art files used in ~.project;, in order
by file name. 

Count: ~.*div_table;

&= Division& Page& File& Size at scale& Reused?
----
~foreach file, div_table;
& ~.div_table[file];& ~.page_table[file];& ~.file;& ~.size_table[file];& ~.reused_table[file];
~end;
&.
----
For a list of just the missing art files, try |~.facility; missing art files|.

.phrase all_biblio_entries all bibliography entries
.synonym all bibliography tags
.synonym bibliography entry list
.synonym bibliography entries
.template
= List of All Bibliography Entries for ~.project;

This is a list of all the bibliography entries in the ~.project;
bibliography, in order by tag.

Count: ~.*page_table;

&= Page& Tag& Author& Year
----
~foreach tag, page_table;
& ~.page_table[tag];& |~.tag;|& ~.author_table[tag];& ~.year_table[tag];
~end;
&.

.phrase all_tags all tags
.synonym tag list
.template
= List of All Tags for ~.project;

This is a list of all the tags used in ~.project;,
in order by tag name.
(This list does not include bibliography entry tags.)

Count: ~.*comp_table;

&= Tag& Comp. Text& Division& Page
----
~foreach tag, comp_table;
& |~.tag;|& ~.comp_table[tag];& ~.div_table[tag];& ~.page_table[tag];
~end;
&.

Tags beginning with |\z*X*:| are internal to ZzTeX. For a description
of those tags, try |~.facility; internal tags|.&/
----
For a list of all the bibliography entry tags, try |~.facility;
all biblio tags|.

.phrase book_info book information : text
.template
= Book Information

~.facility; can show you all kinds of information about the
~.project; project.

& |~.facility;| command words& Report produced
----
& |overview|& Overview of the book and its design.
& |all art files|& List of all art files.
& |all biblio entries|& List of all bibliography entries.
& |all tags|& List of all tags.
& |cleanup report|& Report about cleanup of files.
& |contents|& High-level table of contents.
& |design report|& Report of elements with explanatory comments.
& |duplicate tags|& List of duplicate tags.
& |library|& List of documentation files in ZzTeX directory.
& |missing art files|& List of missing art files.
& |printer report|& Report to accompany final printer PDF.
& |proofnote list|& List of outstanding proofnotes.
& |to-do list|& List of outstanding to-dos.
& |undefined tags|& List of undefined tags.
&.

.phrase contents contents
.synonym table of contents
.template
= Table of Contents for ~.project;

~foreach i, page_list;
& ~.page_list[i];& ~.comp_list[i];& ~.title_list[i];
~end;
&.

.phrase design_report design report
.synonym compositor's design report
.template
= Design Report for ~.project;

~include title_author_publisher_isbn;
&.

== Summary of Design

~include design_summary;

Every project starts with a cleanup of the text files.
Try |~.facility; cleanup report| for a description of
the cleanup of ~.project;.

== Documented Elements

The following sections present the book design elements that
have specific documentation in the main design file ~.zzd_file;.
It is a good idea to review these elements at the start of a project.

~foreach i, head_list;
~if not empty? head_list[i];
=== ~.head_list[i];
~fi;

&starf;&_~.usage_list[i];

~if value? style_list[i];
& Style: ~.style_list[i];
&.
~fi;

~.comment_list[i];
~end;

.phrase duplicate_tags duplicate tags
.synonym duplicate tags list
.template
= List of Duplicate Tags for ~.project;

This is a list of all the duplicate tags in the ~.project; book.

Count: ~.*comp_table;

&= Tag& Comp. Texts& Divisions& Pages
----
~foreach tag, comp_table;
& |~.tag;|& ~.comp_table[tag];& ~.div_table[tag];& ~.page_table[tag];
~end;
&.
----
To see a list of all the tags, try |~.facility; all tags|.

.phrase library library
.synonym documentation
.template
= ZzTeX Documentation library

The following text documents are available in the ZzTeX directory.
They present details about various facilities in ZzTeX.

&= Document& Topic
----
~foreach file, title_table;
& ~.file;& ~.title_table[file];
~end;
&.

.phrase missing_art_files missing art files
.synonym missing art
.template
= List of Missing Art Files for ~.project;

This is a list of the missing art files used in ~.project;, in order
by file name. An art file is missing if there is an |\art| command
for it but it does not exist in the art directory.

Count: ~.*div_table;

&= Division& Page& File& Size at scale& Reused?
----
~foreach file, div_table;
& ~.div_table[file];& ~.page_table[file];& ~.file;& ~.size_table[file];& ~.reused_table[file];
~end;
&.
----
For a list of all the art files, try |~.facility; all art files|.

.phrase printer_report printer report
.template
= Printer Report for ~.project;

~include title_author_publisher_isbn;
& &`
& Trim:& ~.trimwidth; &times; ~.trimheight;
& Head&`margin:& ~.headmargin;
& Gutter:& ~.eveninnermargin;
& &`
& Fonts:& All embedded and subsetted at 100%
& Art:& All embedded
&.

&`

----
Black: For 2-color books, please set Overprint Black as the default.
----

&`

Paul C. Anagnostopoulos&/
Windfall Software&/
978 371-2316&/
paul@windfall.com

&`

= Pagination

~foreach i, page_list;
& ~.page_list[i];& ~.comp_list[i];& ~.title_list[i];
~end;
&.

.phrase-dups project_overview <project>
.synonym book
.synonym overview
.synonym project
.synonym book overview
.synonym project overview
.template
= ~.project; Overview

~include title_author_publisher_isbn;
& &`
& Processed:& ~.date; ~.time;
& ZzTeX&`version:& v~.zztex_version;
& &`
& Art&`root:& ~.art_root;
& Placing&`art?& ~.place_art;
& PDF&`hyperlinks?& ~.hyperlinks;
& &`
& Proof&`ident:& ~.proof;
& Compositor:& ~.compositor;
& Company:& ~.company;
&.

== Summary of Design

~include design_summary;
----
~.facility; can present all sorts of information about this project.
Try |~.facility; book info|.

.phrase proofnote_list proofnote list
.synonym all proofnotes
.template
= List of All Proofnotes for ~.project;

This is a list of all the outstanding proofnotes in the ~.project;
files.

Count: ~.*div_list;

&= Division& Page& Note
----
~foreach i, div_list;
& ~.div_list[i];& ~.page_list[i];& ~.note_list[i];
~end;
&.

.phrase todo_list to-dos
.synonym todos
.synonym to-do list
.synonym todo list
.synonym all to-dos
.synonym all todos
.template
= List of All To-Dos for ~.project;

This is a list of all the outstanding to-do notes in the ~.project;
files.

Count: ~.*div_list;

&= Division& Page& Note
----
~foreach i, div_list;
& ~.div_list[i];& ~.page_list[i];& ~.note_list[i];
~end;
&.
----

.phrase undefined_tags undefined tags
.synonym undefined tags list
.template
= List of Undefined Tags for ~.project;

This is a list of all the undefined tags in the ~.project; files.

Count: ~.*div_table;

&= & First& First
&= Tag& Division& Page& References
----
~foreach tag, div_table;
& |~.tag;|& ~.div_table[tag];& ~.page_table[tag];& ~.refs_table[tag];
~end;
&.
----
To see a list of all the tags, try |~.facility; all tags|.

//                      Footnotes
//                      ---------


.footnote defineenunciation_enunciation \defineenunciation one_command
.footnote defineenunciation_enunciation \title one_marker
.footnote defineenunciation_enunciation \attributiontypecase one_command
.footnote defineenunciation_enunciation \defineeoedingbat one_command
.template defineenunciation_enunciation
For a complete description of this item, try |~.facility; \enunciation|.

.footnote definelocator_locators \definelocator one_command
.footnote definelocator_locators \definelocatorformat one_command
.footnote definelocator_locators \generateindex one_command
.footnote definelocator_locators \indexentry one_command
.footnote definelocator_locators \alphabreak one_command
.template definelocator_locators
~include indexing_info;

.footnote hat_zmhat \hat one_named_char
.template hat_zmhat
*Note:* When used in math mode, |\hat| is a synonym for |\zmhat|
and produces a hat accent over its argument.

.footnote space_spacing space one_character
.template space_spacing
If you are looking for information on spacing commands,
try |~.facility; spacing|.

.footnote proofnote_note_list \proofnote one_block
.template proofnote_note_list
If you are looking for a list of the outstanding proofnotes
for the ~.project; project, try |~.facility; proofnote list|.

.footnote text_math_text \text one_block
.template text_math_text
If you are looking for information on the \text command that
is used in math, try |~.facility; math \text|.

.footnote tilde_zmtilde \tilde one_named_char
.template tilde_zmtilde
*Note:* When used in math mode, |\tilde| is a synonym for |\zmtilde|
and produces a tilde accent over its argument.

.footnote toc_contents \toc one_block
.template toc_contents
If you are looking for a table of contents for ~.project;,
try |~.facility; contents|.

.footnote zmhat_hat \zmhat one_math_accent
.template zmhat_hat
*Note:* This is the internal accent command. Use |\hat| in book files.

.footnote zmtilde_tilde \zmtilde one_math_accent
.template zmtilde_tilde
*Note:* This is the internal accent command. Use |\tilde| in book files.

//                      Included Templates
//                      -------- ---------


.template command_line_chars
Some characters are difficult or impossible to type on the 4NT/Take
Command command line. For an explanation of how to enter them,
try |~.facility; command line|.

.template common_info
& What it is:& ~.class;
& Where it is:& ~.where;
& Attributes:& ~.attributes;
~if value? overridden;& Supercedes:& ~.overridden;~fi;
&.

~if value? usage;Usage: |~.usage;|~fi;

.template command_info
For information on commands in general, try |~.facility; commands|.

.template declaration_info
For information on declarations in general, try |~.facility; declarations|.

.template design_info
& Design macro for:& ~.design;
~if value? derived;& Derived from:& |~.derived;|~fi;
~if value? style;& Element style:& |~.style;|~fi;
~if not empty? variant_list;& Affecting variants:& ~
  |~foreach i,variant_list,iter;~,variant_list[i],iter /= 1;~end;|~fi;
&.

.template design_summary
& Trim:& ~.trimwidth; &times; ~.trimheight;
& Text measure:& ~.textmeasure;
& Lines per page:& ~.linesperpage;
& For make-up:& ~.linesshort; short, ~.lineslong; long
& Even text margins:& left = ~.evenlefttextmargin;, right = ~.evenrighttextmargin;
& Odd text margins:& left = ~.oddlefttextmargin;, right = ~.oddrighttextmargin;
& Paragraph indent:& ~.parindent;
&.

.template gory_details
To see more details about the design, try |~.facility; ~.name; details|.

.template indexing_info
For a complete description of the ZzTeX indexing facility,
try |~.facility; indexing|.

.template internal_note
(Note that names containing at-signs or beginning with 'z' are internal.)

.template math_class_info
For more information on math classes, try |~.facility; math classes|.

.template title_author_publisher_isbn
& Title:& *~.title;*
~foreach i,author,iter;
& ~if iter = 1;Author:~fi;& ~.author[i];
~end;
& Publisher:& ~.publisher;
& ISBN:& ~.isbn;

.include zzdetails.dat
.end