path: root/Master/texmf-dist/doc/info/asy-faq.info

Info file: asy-faq.info,    -*-Text-*-
produced by bfnnconv.pl from the Bizarre Format With No Name.

INFO-DIR-SECTION Languages
START-INFO-DIR-ENTRY
* asymptote FAQ: (asy-faq).    Asymptote Frequently Asked Questions.
END-INFO-DIR-ENTRY


File: asy-faq.info, Node: Top, Next: Question 1.1, Up: (dir)

            ASYMPTOTE FREQUENTLY ASKED QUESTIONS
                            12 May 2016
                          
This is the list of Frequently Asked Questions about Asymptote (asy).

Index

* Menu:
* Section 1::       About Asymptote
* Section 2::       Questions about installation and setup
* Section 3::       Questions about paths
* Section 4::       Questions about labels
* Section 5::       Questions about arrows
* Section 6::       Questions about 2D graphs
* Section 7::       Questions about programming
* Section 8::       Questions about differences between Asymptote and
                    MetaPost
* Section 9::       Questions about output

Section 1, About Asymptote
* Question 1.1::    What is Asymptote?
* Question 1.2::    How do I obtain Asymptote?
* Question 1.3::    Where can I ask questions about Asymptote?
* Question 1.4::    Why was the name Asymptote chosen?
* Question 1.5::    In the internal Asymptote source code, what does the
                    name camp refer to?

Section 2, Questions about installation and setup
* Question 2.1::    Is it possible to install Asymptote on Mac OS X?
* Question 2.2::    Why do I get the error Bad CPU type in executable on
                    installing Asymptote from the MAC OS binary?
* Question 2.3::    What do I do if I get the error: Error: pdfetex (file
                    pdftex.cfg): cannot open config file...texinfo.tex
                    appears to be broken?
* Question 2.4::    What do I do if I get the error: ! Undefined control
                    sequence. l.6 @copying?
* Question 2.5::    Is it possible to integrate Asymptote into LaTeX?
* Question 2.6::    Is it possible to integrate Asymptote into latex or
                    pdflatex?
* Question 2.7::    Do I need the tkinter package to install an Asymptote
                    rpm binary?
* Question 2.8::    What does the path %USERPROFILE%\.asy\config.asy mean?
* Question 2.9::    Why do I get the error "string not terminated" when I
                    try to set settings.dir="C:\asymptote\";?
* Question 2.10::   How do I change environment variables in Microsoft
                    Windows, for example, in order to change the default
                    PostScript viewer?
* Question 2.11::   Under Microsoft Windows XP, why do I get an error like
                    "Invalid Parameter - 432x432"?
* Question 2.12::   Why does Asymptote freeze upon trying to draw a label
                    with my MikTex installation under Microsoft Windows?

Section 3, Questions about paths
* Question 3.1::    Why do I get a syntax error message when I specify an
                    integer value for the path tension?
* Question 3.2::    Shouldn't dots always be the same size?

Section 4, Questions about labels
* Question 4.1::    How do I get Greek letters like omega to show up in my
                    labels?
* Question 4.2::    Can Asymptote use matrices as labels?
* Question 4.3::    How do I tell Asymptote to load a particular LaTeX
                    package, like mathptmx?
* Question 4.4::    How can I use international fonts in Asymptote labels?
* Question 4.5::    How can I use Fourier fonts?
* Question 4.6::    Is there any way to change the default appearance of
                    the decimal separator, using a comma instead of a dot?
* Question 4.7::    How can I get a rotated label with the filled box
                    rotated as well so that it fits the text?
* Question 4.8::    How can I rotate labels in a 3D figure?
* Question 4.9::    How can I draw some squares and circles of a fixed
                    size and put a label in the middle of them?
* Question 4.10::   The binary operator * can be used to scale the color
                    of a pen by a real number. Does this scaling factor
                    have to be less than 1?
* Question 4.11::   Why is the space after the comma decimal separator in
                    my locale so large?
* Question 4.12::   How can I prevent
                    texpreamble("\usepackage[pdftex]{hyperref}") from
                    changing the page size?

Section 5, Questions about arrows
* Question 5.1::    How do I draw two arrows at arbitrary positions along
                    a path?
* Question 5.2::    How do I reverse the direction of an arrowhead?
* Question 5.3::    How do I change the size of all arrows?
* Question 5.4::    Can I create other arrowhead styles?

Section 6, Questions about 2D graphs
* Question 6.1::    How can I draw x axis ticks on the right side, with
                    the tick labels on the left side (relative to the axis
                    path)?
* Question 6.2::    How can I reposition the x axis label to
                    three-quarters along the axis length?
* Question 6.3::    How can I move the x axis label down 10bp?
* Question 6.4::    Can I use different pens for the axis, the axis label,
                    and the tick labels?
* Question 6.5::    How can I change the font type of the axes label?
* Question 6.6::    How can I change the font type of the tick labels on
                    an axis?
* Question 6.7::    How can I prevent axes tick labels from rendering on
                    top of each other?
* Question 6.8::    How do I make the plot region of a graph, ignoring
                    labels and legends, have a fixed size?
* Question 6.9::    How can I plot a function f(x) within [0,1]x[0,2]
                    without explicitly calculating the x values for which
                    f(x) hits the boundary?
* Question 6.10::   Is it possible to define customized palettes?
* Question 6.11::   Is there an easy way to graph factorial functions
                    nicely?
* Question 6.12::   How do I indicate that a certain length should be
                    exactly the size I prescribe with no rescaling, within
                    a picture which has its own size?
* Question 6.13::   How can I make the y axis display base-2 logarithmic
                    values?
* Question 6.14::   How can I align the x axes of two graphs on the same
                    figure?
* Question 6.15::   How can I change the direction of the y-axis, such
                    that negatives values are on the upper y-axis?
* Question 6.16::   How can I fill a path with a function that defines the
                    color of each location?
* Question 6.17::   Is there a way to draw a function that is not
                    explicitly given, such as (y - 2)^2 = x - 1 ?
* Question 6.18::   Is it possible to reverse or stretch an axis?
* Question 6.19::   Why can't I use the UnFill option to draw graphs with
                    empty markers?
* Question 6.20::   How can I force several images to use the same palette
                    range (e.g. the entire 0-255 grayscale range)?

Section 7, Questions about programming
* Question 7.1::    Is Asymptote an interpreter or a compiler?
* Question 7.2::    What is the difference between a frame and a picture?
* Question 7.3::    What is the difference between a path and a guide?
* Question 7.4::    What is a convenient way to declare and initialize an
                    array of pictures?
* Question 7.5::    Is there a way to define functions that act on arrays
                    in general (i.e. work for arrays of any type)?
* Question 7.6::    Is there any way to declare structures ahead of their
                    definition, e.g. where struct A performs some
                    operation on struct B, but B contains an A member?
* Question 7.7::    Where are static variables in for loops allocated?
* Question 7.8::    Is there a debugger for asy?
* Question 7.9::    Do you accept patches for Asymptote?

Section 8, Questions about differences between Asymptote and
                    MetaPost
* Question 8.1::    What is the equivalent of the MetaPost c[a,b]
                    interpolation operator?
* Question 8.2::    How does picture scaling differ in Asymptote and
                    MetaPost?
* Question 8.3::    How can I avoid automatic scaling of a picture?
* Question 8.4::    What is the equivalent of MetaPost ... command?
* Question 8.5::    What is the equivalent of the MetaPost pickup command?
* Question 8.6::    What is the equivalent of the MetaPost whatever
                    command?
* Question 8.7::    What is the equivalent for the MetaPost command for
                    lray - horiz*v - verti*u = whatever*(LightSource - R),
                    a system of three linear equations for three unknowns:
                    horiz, verti, whatever?
* Question 8.8::    In MetaPost, it is possible to have a drawing remain
                    the same size in different pictures by defining a unit
                    u and explicitly multiply all the coordinates by u. Is
                    there a better way to do this in Asymptote?
* Question 8.9::    In MetaPost, one could produce tiling pictures by
                    generating a picture, and then clipping the picture to
                    a rectangle of fixed dimensions around the center of
                    the picture. How is that done in Asymptote?

Section 9, Questions about output
* Question 9.1::    How can I disable automatic invocation of the PS
                    viewer after an asy file is done processing?
* Question 9.2::    How do I output jpeg images?
* Question 9.3::    Can I embed bitmaps (photos) into my drawings and
                    position and scale them?
* Question 9.4::    Does Asymptote support direct PDF output?
* Question 9.5::    How to I produce large pictures of high quality in
                    raster format (e.g. png, giff etc).
* Question 9.6::    Is it possible to produce multi-page documents with
                    asymptote?



File: asy-faq.info, Node: Section 1, Next: Section 2, Previous: Top, Up: Top

About Asymptote

* Menu:
* Question 1.1::    What is Asymptote?
* Question 1.2::    How do I obtain Asymptote?
* Question 1.3::    Where can I ask questions about Asymptote?
* Question 1.4::    Why was the name Asymptote chosen?
* Question 1.5::    In the internal Asymptote source code, what does the
                    name camp refer to?



File: asy-faq.info, Node: Question 1.1, Next: Question 1.2, Previous: Top, Up: Section 1

Question 1.1.  What is Asymptote?

Asymptote is a vector graphics language designed for technical graphics,
inspired by MetaPost but with IEEE floating-point numerics, native
three-dimensional graphics, Grayscale/RGB/CMYK colourspaces, and a
C++-like syntax. Unlike MetaPost, it natively supports multiple-segment
paths (and hence regions other than simply connected ones), tiling
patterns, Gouraud  shading, tensor patch shading, and PostScript images.


File: asy-faq.info, Node: Question 1.2, Next: Question 1.3, Previous: Question 1.1, Up: Section 1

Question 1.2.  How do I obtain Asymptote?

Binary releases are available for Linux, MacOS X, and Microsoft Windows
platforms, in addition to full source code, from the website
http://asymptote.sourceforge.net/.  Many Linux distributions (such as
RedHat and Debian) now include an Asymptote package (check your
distribution's documentation for further information about this).


File: asy-faq.info, Node: Question 1.3, Next: Question 1.4, Previous: Question 1.2, Up: Section 1

Question 1.3.  Where can I ask questions about Asymptote?

If you have a question, please try to find an answer in this FAQ, in the
extensive Asymptote documentation at
http://asymptote.sourceforge.net/doc/, or search the forum:
http://sourceforge.net/forum/forum.php?forum_id=409349.


File: asy-faq.info, Node: Question 1.4, Next: Question 1.5, Previous: Question 1.3, Up: Section 1

Question 1.4.  Why was the name Asymptote chosen?

Well, it isn't the perfect graphics package, but we do think it is getting
there asymptotically...


File: asy-faq.info, Node: Question 1.5, Next: Question 2.1, Previous: Question 1.4, Up: Section 1

Question 1.5.  In the internal Asymptote source code, what does the name camp refer to?

That was our original tentative name for this project, which stood for
"C's Answer to MetaPost" (the language that inspired Asymptote).  However,
we eventually decided that the name Asymptote better emphasizes the
mathematical and graphical nature of this language.


File: asy-faq.info, Node: Section 2, Next: Section 3, Previous: Section 1, Up: Top

Questions about installation and setup

* Menu:
* Question 2.1::    Is it possible to install Asymptote on Mac OS X?
* Question 2.2::    Why do I get the error Bad CPU type in executable on
                    installing Asymptote from the MAC OS binary?
* Question 2.3::    What do I do if I get the error: Error: pdfetex (file
                    pdftex.cfg): cannot open config file...texinfo.tex
                    appears to be broken?
* Question 2.4::    What do I do if I get the error: ! Undefined control
                    sequence. l.6 @copying?
* Question 2.5::    Is it possible to integrate Asymptote into LaTeX?
* Question 2.6::    Is it possible to integrate Asymptote into latex or
                    pdflatex?
* Question 2.7::    Do I need the tkinter package to install an Asymptote
                    rpm binary?
* Question 2.8::    What does the path %USERPROFILE%\.asy\config.asy mean?
* Question 2.9::    Why do I get the error "string not terminated" when I
                    try to set settings.dir="C:\asymptote\";?
* Question 2.10::   How do I change environment variables in Microsoft
                    Windows, for example, in order to change the default
                    PostScript viewer?
* Question 2.11::   Under Microsoft Windows XP, why do I get an error like
                    "Invalid Parameter - 432x432"?
* Question 2.12::   Why does Asymptote freeze upon trying to draw a label
                    with my MikTex installation under Microsoft Windows?



File: asy-faq.info, Node: Question 2.1, Next: Question 2.2, Previous: Question 1.5, Up: Section 2

Question 2.1.  Is it possible to install Asymptote on Mac OS X?

It is easy to compile Asymptote directly from the source code at
http://sourceforge.net/project/showfiles.php?group_id=120000 We recommend
first upgrading to the latest GNU readline library, unless you don't care
about interactive readline support (in which case configure will
automatically detect and disable obsolete versions of the readline
library).  Marius Schamschula also maintains a binary package for various
MacOS X platforms
http://www.hmug.org/pub/MacOS_X/X/Applications/Publishing/asymptote.


File: asy-faq.info, Node: Question 2.2, Next: Question 2.3, Previous: Question 2.1, Up: Section 2

Question 2.2.  Why do I get the error Bad CPU type in executable on installing Asymptote from the MAC OS binary?

This means either that you have a binary distribution for another MAC
architecture, or (according to Marius Schamschula) that you may have a
missing library. The simplest solution is to compile Asymptote directly
from the official source:
http://sourceforge.net/project/showfiles.php?group_id=120000.


File: asy-faq.info, Node: Question 2.3, Next: Question 2.4, Previous: Question 2.2, Up: Section 2

Question 2.3.  What do I do if I get the error: Error: pdfetex (file pdftex.cfg): cannot open config file...texinfo.tex appears to be broken?

Simply put http://asymptote.sourceforge.net/asymptote.pdf in the directory
doc and repeat the command make all.  Or, if you don't want to build a
local copy of the documentation, simply proceed with make install-asy.


File: asy-faq.info, Node: Question 2.4, Next: Question 2.5, Previous: Question 2.3, Up: Section 2

Question 2.4.  What do I do if I get the error: ! Undefined control sequence. l.6 @copying?

Either upgrade your texinfo package or follow one of the easy work arounds
in *Note Question 2.3:: `What do I do if I get the error: Error: pdfetex
(file pdftex.cfg): cannot open config file...texinfo.tex appears to be
broken?'.


File: asy-faq.info, Node: Question 2.5, Next: Question 2.6, Previous: Question 2.4, Up: Section 2

Question 2.5.  Is it possible to integrate Asymptote into LaTeX?

Yes, see the example latexusage.tex. Dario Teixeira has also written a
detailed guide on the topic. You can download it from
http://dario.dse.nl/projects/asylatex/.

Philippe Ivaldi has contributed an Asymptote mode for Emacs users
http://asymptote.sourceforge.net/doc/Editing-modes.html, which includes a
lasy-mode that allows one to compile and view the output of one
\begin{asy}...\end{asy} section at a time.


File: asy-faq.info, Node: Question 2.6, Next: Question 2.7, Previous: Question 2.5, Up: Section 2

Question 2.6.  Is it possible to integrate Asymptote into latex or pdflatex?

Yes, as of version 1.14, Asymptote supports latex and pdflatex (both in
EPS/PDF and inline mode), as illustrated by the example latexusage.tex:

pdflatex latexusage
asy latexusage
pdflatex latexusage

File: asy-faq.info, Node: Question 2.7, Next: Question 2.8, Previous: Question 2.6, Up: Section 2

Question 2.7.  Do I need the tkinter package to install an Asymptote rpm binary?

No, you don't need tkinter unless you want to try out the GUI xasy. Try

rpm -Uvh --nodeps asymptote-x.xx-1.i386.rpm
where x.xx represents the version number.


File: asy-faq.info, Node: Question 2.8, Next: Question 2.9, Previous: Question 2.7, Up: Section 2

Question 2.8.  What does the path %USERPROFILE%\.asy\config.asy mean?

That is the way that Microsoft Windows refers to the user profile
directory.  There's nothing really to understand here, just put your
configuration commands in the file config.asy in a new folder
%USERPROFILE%\.asy.


File: asy-faq.info, Node: Question 2.9, Next: Question 2.10, Previous: Question 2.8, Up: Section 2

Question 2.9.  Why do I get the error "string not terminated" when I try to set settings.dir="C:\asymptote\";?

The backslash is an escape character here, so \" is interpreted as a
verbatim quotation mark, leaving the string without a terminating
quotation mark. Fortunately, this is the only escaped character in
double-quoted strings. A final backslash isn't needed here anyway, but
should you really want one somewhere, you can say:
settings.dir="C:\asymptote"+'\\';.


File: asy-faq.info, Node: Question 2.10, Next: Question 2.11, Previous: Question 2.9, Up: Section 2

Question 2.10.  How do I change environment variables in Microsoft Windows, for example, in order to change the default PostScript viewer?

While it is easier to set the corresponding Asymptote configuration
variable in your config.asy file, here is the procedure for changing
Microsoft Windows environment variables:

Click on the [Start] button

* RIGHT-click on 'My Computer'

* Choose 'Properties' from the popup menu

* Click the 'Advanced' tab

* Click the 'Environment Variables' button.


File: asy-faq.info, Node: Question 2.11, Next: Question 2.12, Previous: Question 2.10, Up: Section 2

Question 2.11.  Under Microsoft Windows XP, why do I get an error like "Invalid Parameter - 432x432"?

This means that ImageMagick wasn't properly installed and you are using
the MSDOS convert program rather than the ImageMagick one. Or you may have
installed ImageMagick but ran Asymptote from an existing MSDOS window.  In
that case, simply open a new window and try again. If that doesn't work,
check that

convert --version 
returns something like

Version: ImageMagick 6.2.8 06/27/06 Q16 http://www.imagemagick.org

File: asy-faq.info, Node: Question 2.12, Next: Question 3.1, Previous: Question 2.11, Up: Section 2

Question 2.12.  Why does Asymptote freeze upon trying to draw a label with my MikTex installation under Microsoft Windows?

Likely, this means that latex and dvips are not in your default path.  Try
adding the appropriate paths in your config.asy file,  for example:

import settings;
latex="C:\Program Files\MiKTeX 2.7\miktex\bin\latex.exe";
dvips="C:\Program Files\MiKTeX 2.7\miktex\bin\dvips.exe";

File: asy-faq.info, Node: Section 3, Next: Section 4, Previous: Section 2, Up: Top

Questions about paths

* Menu:
* Question 3.1::    Why do I get a syntax error message when I specify an
                    integer value for the path tension?
* Question 3.2::    Shouldn't dots always be the same size?



File: asy-faq.info, Node: Question 3.1, Next: Question 3.2, Previous: Question 2.12, Up: Section 3

Question 3.1.  Why do I get a syntax error message when I specify an integer value for the path tension?

What is happening here is that

draw((0,0)..tension 2..(0,50)..(100,100));
is read as

draw((0,0)..tension 2. .(0,50)..(100,100));
So the first . after the two is treated as a decimal point.  Just put a
space after the integer tension value:

draw((0,0)..tension 2 ..(0,50)..(100,100));

File: asy-faq.info, Node: Question 3.2, Next: Question 4.1, Previous: Question 3.1, Up: Section 3

Question 3.2.  Shouldn't dots always be the same size?

From the documentation:

"The dot command defined in the module plain draws a dot having a diameter
equal to an explicit pen linewidth or the default linewidth magnified by
dotfactor (6 by default)."

Thus, when you use the default pen, the dot will have size 6*linewidth,
but when you give a pen with an explicit width specified, you will  have a
dot of size linewidth. If you want the first case to behave like the
second, you may set dotfactor=1.


File: asy-faq.info, Node: Section 4, Next: Section 5, Previous: Section 3, Up: Top

Questions about labels

* Menu:
* Question 4.1::    How do I get Greek letters like omega to show up in my
                    labels?
* Question 4.2::    Can Asymptote use matrices as labels?
* Question 4.3::    How do I tell Asymptote to load a particular LaTeX
                    package, like mathptmx?
* Question 4.4::    How can I use international fonts in Asymptote labels?
* Question 4.5::    How can I use Fourier fonts?
* Question 4.6::    Is there any way to change the default appearance of
                    the decimal separator, using a comma instead of a dot?
* Question 4.7::    How can I get a rotated label with the filled box
                    rotated as well so that it fits the text?
* Question 4.8::    How can I rotate labels in a 3D figure?
* Question 4.9::    How can I draw some squares and circles of a fixed
                    size and put a label in the middle of them?
* Question 4.10::   The binary operator * can be used to scale the color
                    of a pen by a real number. Does this scaling factor
                    have to be less than 1?
* Question 4.11::   Why is the space after the comma decimal separator in
                    my locale so large?
* Question 4.12::   How can I prevent
                    texpreamble("\usepackage[pdftex]{hyperref}") from
                    changing the page size?



File: asy-faq.info, Node: Question 4.1, Next: Question 4.2, Previous: Question 3.2, Up: Section 4

Question 4.1.  How do I get Greek letters like omega to show up in my labels?

In (La)TeX, Greek letters can be obtained in math mode by prepending a
backslash to the letter name. So for a omega symbol, use "$\omega$".
Everything between the dollar signs is considered to be a math formula.
Uppercase Greek letters can be used by capitalizing the first letter of
the name:

label("$\omega$",(0,0));
label("$\Omega$",(20,0));

File: asy-faq.info, Node: Question 4.2, Next: Question 4.3, Previous: Question 4.1, Up: Section 4

Question 4.2.  Can Asymptote use matrices as labels?

Yes:
usepackage("amsmath");
label("$\begin{matrix} 1 & 2 \\\ 1 & 1 \end{matrix}$",(0,0));

File: asy-faq.info, Node: Question 4.3, Next: Question 4.4, Previous: Question 4.2, Up: Section 4

Question 4.3.  How do I tell Asymptote to load a particular LaTeX package, like mathptmx?

Put

usepackage("mathptmx");
at the beginning of your file. Note: to enable the Adobe Times Roman font
for text, you will also need to say:
defaultpen(TimesRoman());

File: asy-faq.info, Node: Question 4.4, Next: Question 4.5, Previous: Question 4.3, Up: Section 4

Question 4.4.  How can I use international fonts in Asymptote labels?

See http://asymptote.sourceforge.net/doc/unicode.html.


File: asy-faq.info, Node: Question 4.5, Next: Question 4.6, Previous: Question 4.4, Up: Section 4

Question 4.5.  How can I use Fourier fonts?

usepackage("fourier");
defaultpen(font("T1","fut\textfamilyextension","m","n"));

File: asy-faq.info, Node: Question 4.6, Next: Question 4.7, Previous: Question 4.5, Up: Section 4

Question 4.6.  Is there any way to change the default appearance of the decimal separator, using a comma instead of a dot?

Just set your locale appropriately:

locale("it_IT");
usepackage("icomma");
label(format(0.5));

File: asy-faq.info, Node: Question 4.7, Next: Question 4.8, Previous: Question 4.6, Up: Section 4

Question 4.7.  How can I get a rotated label with the filled box rotated as well so that it fits the text?

frame f;
label(f,"This is some text",white,Fill(blue));
add(rotate(65)*f);

File: asy-faq.info, Node: Question 4.8, Next: Question 4.9, Previous: Question 4.7, Up: Section 4

Question 4.8.  How can I rotate labels in a 3D figure?

You need to first project the triple to a pair like this:

import three;
size(100,100);

draw(rotate(90,project(Z))*"A",O--X);

File: asy-faq.info, Node: Question 4.9, Next: Question 4.10, Previous: Question 4.8, Up: Section 4

Question 4.9.  How can I draw some squares and circles of a fixed size and put a label in the middle of them?

Fixed-size objects should be drawn on a separate picture and then added to
currentpicture. Here is one way (see also
http://asymptote.sourceforge.net/gallery/subpictures.asy and
http://asymptote.sourceforge.net/gallery/mosquito.asy):

real u=2cm;
 
picture square;
draw(square,scale(u)*shift(-0.5,-0.5)*unitsquare);
 
picture circle;
draw(circle,scale(0.5u)*unitcircle);
 
void add(picture pic=currentpicture, Label L, picture object, pair z) { 
add(pic,object,z);
label(pic,L,z);
} 
 
add("square",square,(0,0));
add("circle",circle,(5cm,0));

File: asy-faq.info, Node: Question 4.10, Next: Question 4.11, Previous: Question 4.9, Up: Section 4

Question 4.10.  The binary operator * can be used to scale the color of a pen by a real number. Does this scaling factor have to be less than 1?

The scaling factor can be greater than 1. But keep in mind that the rgb
color  components saturate at 1.

Try
write(cyan); write(0.8*cyan); write(1.5*cyan);
and you will quickly see what is going on.

To get a lighter cyan you can say white+cyan,  which yields rgb(0.5,1,1).
If you want something even lighter specify the  rgb colors directly,  for
example, rgb(0.9,1,1).

Alternatively, work in cmyk colour space, which is nicer in that it
handles  saturation separately from hue:

0.1*Cyan is light and 0.9*Cyan is dark.  You can also say 0.1*cmyk(red).


File: asy-faq.info, Node: Question 4.11, Next: Question 4.12, Previous: Question 4.10, Up: Section 4

Question 4.11.  Why is the space after the comma decimal separator in my locale so large?

LaTeX is treating the comma as punctuation and not as a decimal separator.
The solution is to load the icomma package near the beginning of your
file:
usepackage("icomma");

File: asy-faq.info, Node: Question 4.12, Next: Question 5.1, Previous: Question 4.11, Up: Section 4

Question 4.12.  How can I prevent texpreamble("\usepackage[pdftex]{hyperref}") from changing the page size?

texpreamble("\usepackage[pdftex,setpagesize=false]{hyperref}");

File: asy-faq.info, Node: Section 5, Next: Section 6, Previous: Section 4, Up: Top

Questions about arrows

* Menu:
* Question 5.1::    How do I draw two arrows at arbitrary positions along
                    a path?
* Question 5.2::    How do I reverse the direction of an arrowhead?
* Question 5.3::    How do I change the size of all arrows?
* Question 5.4::    Can I create other arrowhead styles?



File: asy-faq.info, Node: Question 5.1, Next: Question 5.2, Previous: Question 4.12, Up: Section 5

Question 5.1.  How do I draw two arrows at arbitrary positions along a path?

Assuming that at least one of the arrowheads is to be filled, you can do
this:

size(200); 
path g = (0,0)..(1,3)..(3,0); 
draw(g,Arrow(Relative(0.9))); 
add(arrow(g,invisible,FillDraw(black),Relative(0.5))); 
add(arrow(reverse(g),invisible,FillDraw(white,black),Relative(0.9))); 
If both of the arrowheads are to be drawn with filltype NoFill, one will
need to create a specialized version of the arrow routine in
plain_arrows.asy:

void arrow(frame f, arrowhead arrowhead=DefaultHead,
           path g, pen p=currentpen, real size=0,
           real angle=arrowangle, filltype filltype=arrowhead.defaultfilltype,
           position position=EndPoint, bool forwards=true,
           margin margin=NoMargin, bool center=false);

File: asy-faq.info, Node: Question 5.2, Next: Question 5.3, Previous: Question 5.1, Up: Section 5

Question 5.2.  How do I reverse the direction of an arrowhead?

Simply reverse the direction of the path.

path g=((0,0)--(5cm,0));
draw(reverse(g),Arrow(Relative(0.55)));

File: asy-faq.info, Node: Question 5.3, Next: Question 5.4, Previous: Question 5.2, Up: Section 5

Question 5.3.  How do I change the size of all arrows?

To override the arrowsize you can give every Arrow drawing attribute a
real size argument. If you want to do this globally, you can override the
pen-dependent arrowsize function like this:

DefaultHead.size=new real(pen p=currentpen) {return 2mm;};

File: asy-faq.info, Node: Question 5.4, Next: Question 6.1, Previous: Question 5.3, Up: Section 5

Question 5.4.  Can I create other arrowhead styles?

Yes, you can build custom arrowheads like this (see the predefined
arrowhead styles in plain_arrows.asy for further examples):

arrowhead DotHead;
DotHead.head=new path(path g, position position=EndPoint, pen p=currentpen,
                      real size=0, real angle=arrowangle) {
  if(size == 0) size=DotHead.size(p);
  bool relative=position.relative;
  real position=position.position.x;
  if(relative) position=reltime(g,position);
  path r=subpath(g,position,0);
  pair x=point(r,0);
  real t=arctime(r,size);
  pair y=point(r,t);
  return circle(0.5(x+y),0.5size);
};

size(100);
draw((0,0)..(1,1)..(2,0),Arrow(DotHead));
dot((2,0),red);
If you submit your alternate arrowheads to the Forum or the Patch
Tracking System, we'll consider including them in a future release.


File: asy-faq.info, Node: Section 6, Next: Section 7, Previous: Section 5, Up: Top

Questions about 2D graphs

* Menu:
* Question 6.1::    How can I draw x axis ticks on the right side, with
                    the tick labels on the left side (relative to the axis
                    path)?
* Question 6.2::    How can I reposition the x axis label to
                    three-quarters along the axis length?
* Question 6.3::    How can I move the x axis label down 10bp?
* Question 6.4::    Can I use different pens for the axis, the axis label,
                    and the tick labels?
* Question 6.5::    How can I change the font type of the axes label?
* Question 6.6::    How can I change the font type of the tick labels on
                    an axis?
* Question 6.7::    How can I prevent axes tick labels from rendering on
                    top of each other?
* Question 6.8::    How do I make the plot region of a graph, ignoring
                    labels and legends, have a fixed size?
* Question 6.9::    How can I plot a function f(x) within [0,1]x[0,2]
                    without explicitly calculating the x values for which
                    f(x) hits the boundary?
* Question 6.10::   Is it possible to define customized palettes?
* Question 6.11::   Is there an easy way to graph factorial functions
                    nicely?
* Question 6.12::   How do I indicate that a certain length should be
                    exactly the size I prescribe with no rescaling, within
                    a picture which has its own size?
* Question 6.13::   How can I make the y axis display base-2 logarithmic
                    values?
* Question 6.14::   How can I align the x axes of two graphs on the same
                    figure?
* Question 6.15::   How can I change the direction of the y-axis, such
                    that negatives values are on the upper y-axis?
* Question 6.16::   How can I fill a path with a function that defines the
                    color of each location?
* Question 6.17::   Is there a way to draw a function that is not
                    explicitly given, such as (y - 2)^2 = x - 1 ?
* Question 6.18::   Is it possible to reverse or stretch an axis?
* Question 6.19::   Why can't I use the UnFill option to draw graphs with
                    empty markers?
* Question 6.20::   How can I force several images to use the same palette
                    range (e.g. the entire 0-255 grayscale range)?



File: asy-faq.info, Node: Question 6.1, Next: Question 6.2, Previous: Question 5.4, Up: Section 6

Question 6.1.  How can I draw x axis ticks on the right side, with the tick labels on the left side (relative to the axis path)?

import graph;

size(250,200,IgnoreAspect);

draw(graph(exp,-1,1),red);

xaxis("$x$",RightTicks(Label(align=left)));
yaxis("$y$",RightTicks);

File: asy-faq.info, Node: Question 6.2, Next: Question 6.3, Previous: Question 6.1, Up: Section 6

Question 6.2.  How can I reposition the x axis label to three-quarters along the axis length?

import graph;

size(250,200,IgnoreAspect);

draw(graph(exp,-1,1),red);

xaxis(Label("$x$",0.75),LeftTicks);
yaxis("$y$",RightTicks);

File: asy-faq.info, Node: Question 6.3, Next: Question 6.4, Previous: Question 6.2, Up: Section 6

Question 6.3.  How can I move the x axis label down 10bp?

import graph;
size(250,200,IgnoreAspect);

draw(graph(exp,-1,1),red);

xaxis(shift(0,-10)*"$x$",LeftTicks);
yaxis("$y$",RightTicks);

File: asy-faq.info, Node: Question 6.4, Next: Question 6.5, Previous: Question 6.3, Up: Section 6

Question 6.4.  Can I use different pens for the axis, the axis label, and the tick labels?

Yes:

import graph;
size(300,200,IgnoreAspect);

xlimits(-50,50);
ylimits(0,100);

xaxis(Label("$x$",MidPoint,red),Bottom,blue,LeftTicks(green));
yaxis("$y$",Left,RightTicks);

File: asy-faq.info, Node: Question 6.5, Next: Question 6.6, Previous: Question 6.4, Up: Section 6

Question 6.5.  How can I change the font type of the axes label?

import graph;
size(300,200,IgnoreAspect);

xlimits(-50,50);
ylimits(0,100);

xaxis("x",Bottom,Courier("m","n"),LeftTicks);
yaxis("$y$",Left,RightTicks);

File: asy-faq.info, Node: Question 6.6, Next: Question 6.7, Previous: Question 6.5, Up: Section 6

Question 6.6.  How can I change the font type of the tick labels on an axis?

Tick labels are by default typeset in (TeX) math mode, so to use other
fonts you need to override the default tick format:

import graph;
size(300,200,IgnoreAspect);

xlimits(-50,50);
ylimits(0,100);

xaxis("$x$",Bottom,LeftTicks("%.4g",Courier("m","n")+fontsize(12)));
yaxis("$y$",Left,RightTicks);

File: asy-faq.info, Node: Question 6.7, Next: Question 6.8, Previous: Question 6.6, Up: Section 6

Question 6.7.  How can I prevent axes tick labels from rendering on top of each other?

Either:

(i) give LeftTicks/RightTicks/Ticks the arguments beginlabel=false and/or
endlabel=false;

(ii) explicitly remove specific ticks and their labels (drawing them
manually; see
http://www.github.com/vectorgraphics/asymptote/base/graph.asy for the
definition of NoZero):

import graph;

size(10cm);

real f(real x) {return x^2;}
 
draw(graph(f,-2,2));

xaxis(Ticks(NoZero));
yaxis(Ticks(NoZero));

label("$0$",(0,0),SW);
(iii) explicitly remove specific tick labels and draw them manually (see
http://www.github.com/vectorgraphics/asymptote/base/graph.asy for the
definition of NoZeroFormat):

import graph;

size(10cm);

real f(real x) {return x^2;}
 
draw(graph(f,-2,2));

xaxis(Ticks(NoZeroFormat));
yaxis(Ticks(NoZeroFormat));

label("$0$",(0,0),SW);
(iv) use the xasy GUI to move overlapping labels;

(v) change the Label argument of LeftTicks, RightTicks, or Ticks to:

Label(currentpen+overwrite(Move))
Solution (v) will move labels that might otherwise overwrite a previous
label. Other possible overwrite arguments are Allow (allows overlapping
labels; the default), Suppress (an overlapping label will not be written
at all), SuppressQuiet, and MoveQuiet. The last two achieve the same
result as the non-quiet types, but will not notify you which labels are
overlapping. See:  http://asymptote.sourceforge.net/doc/Pens.html.

In the case of a user-specified tick array, you can change which labels
get suppressed/moved by changing the order of array entries.


File: asy-faq.info, Node: Question 6.8, Next: Question 6.9, Previous: Question 6.7, Up: Section 6

Question 6.8.  How do I make the plot region of a graph, ignoring labels and legends, have a fixed size?

Either:

i) Specify an explicit unitsize, which overrides any call to size:
unitsize(x=1cm,y=2cm);
ii) Explicitly tell Asymptote to map the plot region to a specific size:
import graph;
real[] x={0,1,2,3};
real[] y=x^2;
draw(graph(x,y),red);
xaxis("$x$",BottomTop,LeftTicks);
yaxis("$y$",LeftRight,RightTicks);

size(5cm,5cm,point(SW),point(NE));

label("$f_\mathrm{T}$",point(N),2N);
iii) Specify the points in user coordinates that should correspond to a
given picture size:

import graph;

size(250,200,IgnoreAspect);

draw(graph(exp,-1,1),red);

xaxis("$x$",BottomTop,LeftTicks);
yaxis("$y$",LeftRight,RightTicks);

fixedscaling((-1.5,-0.5),(1.5,3.5));
In this example, the user coordinate (-1.5,-0.5) will end up being the
lower left corner of the figure and (1.5,3.5) will be the upper right
corner. You can use this option to ensure multiple figures have the same
scaling and same resulting figure size (just ensure the two coordinates
given to fixedscaling() leaves room for any labels).

See also http://asymptote.sourceforge.net/doc/Frames-and-pictures.html.


File: asy-faq.info, Node: Question 6.9, Next: Question 6.10, Previous: Question 6.8, Up: Section 6

Question 6.9.  How can I plot a function f(x) within [0,1]x[0,2] without explicitly calculating the x values for which f(x) hits the boundary?

Call limits with the Crop option before drawing the graph:
import graph;

size(250,200,IgnoreAspect);

draw(graph(exp,-1,1),red);

limits((0,0),(1,2),Crop);

xaxis("$x$",BottomTop,LeftTicks);
yaxis("$y$",LeftRight,RightTicks);
See also http://asymptote.sourceforge.net/doc/graph.html.


File: asy-faq.info, Node: Question 6.10, Next: Question 6.11, Previous: Question 6.9, Up: Section 6

Question 6.10.  Is it possible to define customized palettes?

Yes, you may generate your own pen[] array. For example:

int NColors=32768;
pen[] MyPalette=new pen[NColors];
real step=1/(NColors-1.0);
// Start at black: rgb(0,0,0) 
// End at yellow: rgb(1,1,0) 
for(int i=0; i < NColors; ++i) { 
  real rgval=i*step;
  MyPalette[i]=rgb(rgval,rgval,0.0);
} 

File: asy-faq.info, Node: Question 6.11, Next: Question 6.12, Previous: Question 6.10, Up: Section 6

Question 6.11.  Is there an easy way to graph factorial functions nicely?

The example below shows a continuous function and two methods for placing
markers at integer values of x:

import graph;
 
size(200,200,IgnoreAspect);
 
real factorial(real t) {return gamma(t+1);} 
 
scale(Linear,Log);
 
// Graph the factorial function.
draw(graph(factorial,0,10));
 
// Method 1: Draw nodes, but hide line
pair F(int t) {return (t,factorial(t));} 
// Graph of factorial function from 0 to 10
pair[] z=sequence(F,11);
draw(graph(z),invisible,marker(scale(0.8mm)*unitcircle,blue,Fill));
 
// Method 2: Nongraphing routines require explicit scaling:
pair dotloc(int t) {return Scale(F(t));} 
pair[] dotlocs=sequence(dotloc,11);
dot(dotlocs);
 
xaxis("$x$",BottomTop,LeftTicks);
yaxis("$y$",LeftRight,RightTicks);

File: asy-faq.info, Node: Question 6.12, Next: Question 6.13, Previous: Question 6.11, Up: Section 6

Question 6.12.  How do I indicate that a certain length should be exactly the size I prescribe with no rescaling, within a picture which has its own size?

Here's an easy way to do this.

size(12cm,0);
 
void distance(picture pic=currentpicture, pair A, pair B, Label L="", real n=0,
              pen p=currentpen) 
{
  real d=3mm;
  path g=A--B;
  transform T=shift(-n*d*unit(B-A)*I);
  pic.add(new void(frame f, transform t) {
    picture opic;
    path G=T*t*g;
    draw(opic,Label(L,Center,UnFill(1)),G,p,Arrows(NoFill),Bars,PenMargins);
    add(f,opic.fit());
  });
  pic.addBox(min(g),max(g),T*min(p),T*max(p));
} 
 
pair A=(0,0), B=(3,3);
 
dot(A);
dot(B);
 
distance(A,B,"$\ell$",1);

File: asy-faq.info, Node: Question 6.13, Next: Question 6.14, Previous: Question 6.12, Up: Section 6

Question 6.13.  How can I make the y axis display base-2 logarithmic values?

See the example http://asymptote.sourceforge.net/gallery/2D
graphs/log2graph.asy.


File: asy-faq.info, Node: Question 6.14, Next: Question 6.15, Previous: Question 6.13, Up: Section 6

Question 6.14.  How can I align the x axes of two graphs on the same figure?

An easy way to do this, if the axes to be aligned have the same scaling
and size, is illustrated in the example
http://asymptote.sourceforge.net/gallery/2D graphs/alignedaxis.asy.

Here is a more general solution to the problem of aligning two arbitrary
axes.  One fits the second picture to a frame based on the horizontal
scaling for the first picture:

import graph;

real width=15cm;
real aspect=0.3;

picture pic1,pic2;

size(pic1,width,aspect*width,IgnoreAspect);
size(pic2,width,aspect*width,IgnoreAspect);

scale(pic1,false);
scale(pic2,false);

real xmin1=6;
real xmax1=9;
real xmin2=8;
real xmax2=16;

real a1=1;
real a2=0.001;

real f1(real x) {return a1*sin(x/2*pi);}
real f2(real x) {return a2*sin(x/4*pi);}

draw(pic1,graph(pic1,f1,xmin1,xmax1));
draw(pic2,graph(pic2,f2,xmin2,xmax2));

xaxis(pic1,Bottom,LeftTicks());
yaxis(pic1,"$f_1(x)$",Left,RightTicks);

xaxis(pic2,"$x$",Bottom,LeftTicks(Step=4));
yaxis(pic2,"$f_2(x)$",Left,RightTicks);

yequals(pic1,0,Dotted);
yequals(pic2,0,Dotted);

pair min1=point(pic1,SW);
pair max1=point(pic1,NE);

pair min2=point(pic2,SW);
pair max2=point(pic2,NE);

real scale=(max1.x-min1.x)/(max2.x-min2.x);
real shift=min1.x/scale-min2.x;

transform t1=pic1.calculateTransform();
transform t2=pic2.calculateTransform();
transform T=xscale(scale*t1.xx)*yscale(t2.yy);

add(pic1.fit());
real height=truepoint(N,user=false).y-truepoint(S,user=false).y;
add(shift(0,-height)*(shift(shift)*pic2).fit(T));

File: asy-faq.info, Node: Question 6.15, Next: Question 6.16, Previous: Question 6.14, Up: Section 6

Question 6.15.  How can I change the direction of the y-axis, such that negatives values are on the upper y-axis?

Here is a simple example (see also the example
http://asymptote.sourceforge.net/gallery/2D graphs/diatom.asy or the
discussion of Linear(-1) in the documentation):

import graph;
size(250,200,IgnoreAspect);

scale(Linear,Linear(-1));

draw(graph(log,0.1,10),red);

xaxis("$x$",LeftTicks);
yaxis("$y$",RightTicks);

File: asy-faq.info, Node: Question 6.16, Next: Question 6.17, Previous: Question 6.15, Up: Section 6

Question 6.16.  How can I fill a path with a function that defines the color of each location?

Use functionshade with a PDF tex engine, as illustrated by the example
{functionshading.asy}.

If you want to produce PostScript output, an approximate solution for now
would be to superimpose a fine grid and specify colors to  latticeshade
that depend on position as a single pen[][] lattice. Alternatively, it may
be more efficient to use tensorshade}.


File: asy-faq.info, Node: Question 6.17, Next: Question 6.18, Previous: Question 6.16, Up: Section 6

Question 6.17.  Is there a way to draw a function that is not explicitly given, such as (y - 2)^2 = x - 1 ?

Yes, use the parametric form

y=t 
x=(t-2)^2+1 
See the example http://asymptote.sourceforge.net/gallery/2D
graphs/parametricgraph.asy.


File: asy-faq.info, Node: Question 6.18, Next: Question 6.19, Previous: Question 6.17, Up: Section 6

Question 6.18.  Is it possible to reverse or stretch an axis?

The real scaling argument to Linear is used to stretch (or reverse) the
axis.  To see the effect of axis stretching, be sure not to specify
IgnoreAspect in  the picture size command.

A secondary axis has the same length as the primary axis, so stretching
cannot  have any effect. But one can still reverse the axis, with
Linear(-1).


File: asy-faq.info, Node: Question 6.19, Next: Question 6.20, Previous: Question 6.18, Up: Section 6

Question 6.19.  Why can't I use the UnFill option to draw graphs with empty markers?

UnFill won't work here because it only affects the local frame the markers
are initially drawn on, before being added to currentpicture.  Here is a
way of achieving the desired effect (assuming a white background):

import graph;
size(10cm,0);
pair[] z={(0,0),(0.5,0.5),(1,1)};
path g=graph(z);
 
draw(shift(0,.5)*g,marker(scale(5)*unitcircle,FillDraw(white)));
 
xaxis(BottomTop,LeftTicks);
yaxis(LeftRight,RightTicks);

File: asy-faq.info, Node: Question 6.20, Next: Question 7.1, Previous: Question 6.19, Up: Section 6

Question 6.20.  How can I force several images to use the same palette range (e.g. the entire 0-255 grayscale range)?

The palette color space corresponds to a range of values specified by the
argument range, which can be Full, Automatic or an explicit range
Range(pair min, pair max). Here Full} specifies a range varying from the
minimum to maximum values of the function over the sampling interval,
while Automatic selects "nice" limits.


File: asy-faq.info, Node: Section 7, Next: Section 8, Previous: Section 6, Up: Top

Questions about programming

* Menu:
* Question 7.1::    Is Asymptote an interpreter or a compiler?
* Question 7.2::    What is the difference between a frame and a picture?
* Question 7.3::    What is the difference between a path and a guide?
* Question 7.4::    What is a convenient way to declare and initialize an
                    array of pictures?
* Question 7.5::    Is there a way to define functions that act on arrays
                    in general (i.e. work for arrays of any type)?
* Question 7.6::    Is there any way to declare structures ahead of their
                    definition, e.g. where struct A performs some
                    operation on struct B, but B contains an A member?
* Question 7.7::    Where are static variables in for loops allocated?
* Question 7.8::    Is there a debugger for asy?
* Question 7.9::    Do you accept patches for Asymptote?



File: asy-faq.info, Node: Question 7.1, Next: Question 7.2, Previous: Question 6.20, Up: Section 7

Question 7.1.  Is Asymptote an interpreter or a compiler?

Asymptote compiles Asymptote commands into its own virtual machine code.
It  then runs this pseudocode on a virtual machine to produce PostScript
code.


File: asy-faq.info, Node: Question 7.2, Next: Question 7.3, Previous: Question 7.1, Up: Section 7

Question 7.2.  What is the difference between a frame and a picture?

Frames are canvases for drawing in PostScript coordinates. While working
with frames directly is occasionally necessary for constructing deferred
drawing routines, pictures are usually more convenient to work with.  See
*Note Question 8.8:: `In MetaPost, it is possible to have a drawing remain
the same size in different pictures by defining a unit u and explicitly
multiply all the coordinates by u. Is there a better way to do this in
Asymptote?'.


File: asy-faq.info, Node: Question 7.3, Next: Question 7.4, Previous: Question 7.2, Up: Section 7

Question 7.3.  What is the difference between a path and a guide?

A path is a cubic spline with fixed endpoint conditions.

A guide is an unresolved cubic spline (list of cubic-spline nodes and
control points). A guide is like a path except that the computation of the
cubic spline is deferred until drawing time (when it is resolved into a
path); this allows two guides with free endpoint conditions to be joined
together smoothly.


File: asy-faq.info, Node: Question 7.4, Next: Question 7.5, Previous: Question 7.3, Up: Section 7

Question 7.4.  What is a convenient way to declare and initialize an array of pictures?

You could write yourself a routine such as:
picture[] picture(int n) { 
  picture[] pic;
  for(int i=0; i < n; ++i) { 
    pic[i]=new picture;
    size(pic[i],19cm,0);
  } 
  return pic;
} 
 
picture[] pic=picture(6);

File: asy-faq.info, Node: Question 7.5, Next: Question 7.6, Previous: Question 7.4, Up: Section 7

Question 7.5.  Is there a way to define functions that act on arrays in general (i.e. work for arrays of any type)?

Generic types aren't yet implemented.

But for now you can at least say
typedef string T;
include F;
 
typedef real T;
include F;
where F.asy contains some type-dependent code like
T[] operator $(T A, T B) {return new T[] {A,B};}

File: asy-faq.info, Node: Question 7.6, Next: Question 7.7, Previous: Question 7.5, Up: Section 7

Question 7.6.  Is there any way to declare structures ahead of their definition, e.g. where struct A performs some operation on struct B, but B contains an A member?

Asymptote does not support forward declaration of types. You can, however,
nest structures, so that both types are visible for parts of the bodies of
both structure definitions. For example:

struct B { 
  typedef void someroutine(B b);
 
  static struct A { 
    someroutine routine;
    void operator init(someroutine routine) { 
      this.routine=routine;
    } 
  } 
 
  string test="Testing";
} 
 
typedef B.A A;
 
A a=B.A(new void(B b){write(b.test);});
 
B b;
a.routine(b);

File: asy-faq.info, Node: Question 7.7, Next: Question 7.8, Previous: Question 7.6, Up: Section 7

Question 7.7.  Where are static variables in for loops allocated?

In the example

void f() { 
  for(int i=0; i < 3; ++i) { 
    static int n;
    ++n;
    write(n);
  }
} 

f(); // Writes 1, 2, 3
the static qualifier means that n is allocated not just outside of the for
loop, but also outside the function. This is clear if you call  f multiple
times; there is still only one instance of n.

The "level" of a variable (where it is allocated) has nothing to do with
the "scope" of a variable (how long it can be referred to by name).  The
curly braces enclosing a block affect only a variable's scope, not its
level.

Static modifiers are meaningless at the top level; they generate a warning
and are simply ignored:

for(int i=0; i < 3; ++i) { 
  static int n;
  ++n;
  write(n);
}
// Writes warning about top-level static modifier and then 1, 1, 1
Since version 1.22, non-static variables allocated in a loop body are
allocated anew every iteration.  This is only noticable in obscure cases
where a variable in a loop is accessed in the closure of a function
defined in the loop:

int f();
 
for(int i=0; i < 10; ++i) { 
  int j=10*i;
  if(i == 5)
    f=new int() {return j;};
} 
 
write(f()); // Writes 50
Variables in the body of a loop last as long as that iteration of the
loop, unless they are kept alive by a function closure as in the example
above.  In a function body, variables will last at least as long as the
function call, though because of closures and garbage collection, they may
last longer than that.  If defined at the top level of a file or at the
interactive prompt, they will last at least until the end of the file or
prompt's run.


File: asy-faq.info, Node: Question 7.8, Next: Question 7.9, Previous: Question 7.7, Up: Section 7

Question 7.8.  Is there a debugger for asy?

Yes, Asymptote includes a line-based debugger:

http://asymptote.sourceforge.net/doc/Debugger.html


File: asy-faq.info, Node: Question 7.9, Next: Question 8.1, Previous: Question 7.8, Up: Section 7

Question 7.9.  Do you accept patches for Asymptote?

Yes, in fact we would prefer that users submit patches for customized
features (to http://sourceforge.net/tracker/?atid=685685&group_id=120000)
instead of relying on us to do all of the coding. Development will proceed
faster that way.


File: asy-faq.info, Node: Section 8, Next: Section 9, Previous: Section 7, Up: Top

Questions about differences between Asymptote and MetaPost

* Menu:
* Question 8.1::    What is the equivalent of the MetaPost c[a,b]
                    interpolation operator?
* Question 8.2::    How does picture scaling differ in Asymptote and
                    MetaPost?
* Question 8.3::    How can I avoid automatic scaling of a picture?
* Question 8.4::    What is the equivalent of MetaPost ... command?
* Question 8.5::    What is the equivalent of the MetaPost pickup command?
* Question 8.6::    What is the equivalent of the MetaPost whatever
                    command?
* Question 8.7::    What is the equivalent for the MetaPost command for
                    lray - horiz*v - verti*u = whatever*(LightSource - R),
                    a system of three linear equations for three unknowns:
                    horiz, verti, whatever?
* Question 8.8::    In MetaPost, it is possible to have a drawing remain
                    the same size in different pictures by defining a unit
                    u and explicitly multiply all the coordinates by u. Is
                    there a better way to do this in Asymptote?
* Question 8.9::    In MetaPost, one could produce tiling pictures by
                    generating a picture, and then clipping the picture to
                    a rectangle of fixed dimensions around the center of
                    the picture. How is that done in Asymptote?



File: asy-faq.info, Node: Question 8.1, Next: Question 8.2, Previous: Question 7.9, Up: Section 8

Question 8.1.  What is the equivalent of the MetaPost c[a,b] interpolation operator?

interp(a,b,c);

File: asy-faq.info, Node: Question 8.2, Next: Question 8.3, Previous: Question 8.1, Up: Section 8

Question 8.2.  How does picture scaling differ in Asymptote and MetaPost?

Asymptote includes an optional facility to do automatic scaling of
pictures to achieve a given overall picture size, whereas Metapost only
supports manual scaling. Asymptote defers drawing of objects drawn to
pictures and distinguishes between true-size objects and objects that
should scale with the picture size. The resulting linear programming
problem is solved via the Simplex method.

See the http://asymptote.sourceforge.net/gallery/dimension.asy example for
an example of how deferred drawing is used to accomodate both user and
true-size (PostScript) coordinates.


File: asy-faq.info, Node: Question 8.3, Next: Question 8.4, Previous: Question 8.2, Up: Section 8

Question 8.3.  How can I avoid automatic scaling of a picture?

If you really like Metapost-style manual (hard-wired) scaling either:

(i) use the default size(0,0) for the entire picture and do all of the
scaling by hand, just like in MetaPost;

(ii) draw to a separate picture pic and add(pic.fit());

(iii) use frames.


File: asy-faq.info, Node: Question 8.4, Next: Question 8.5, Previous: Question 8.3, Up: Section 8

Question 8.4.  What is the equivalent of MetaPost ... command?

The connector :: is a macro for tension atleast 1:

size(100);
pair z0=(0,0);
pair z1=(1,0.25);
pair z2=(2,0);
draw(z0{up}::z1{right}::z2{down});

File: asy-faq.info, Node: Question 8.5, Next: Question 8.6, Previous: Question 8.4, Up: Section 8

Question 8.5.  What is the equivalent of the MetaPost pickup command?

Just say, for example:

currentpen=red;

File: asy-faq.info, Node: Question 8.6, Next: Question 8.7, Previous: Question 8.5, Up: Section 8

Question 8.6.  What is the equivalent of the MetaPost whatever command?

Asymptote does not implicitly solve linear equations and therefore does
not have the notion of a whatever unknown. Such a facility could certainly
be added (perhaps using the notation ?= since = means assignment).
However, the most common uses of whatever in MetaPost are covered by
functions like extension in math.asy:
pair extension(pair P, pair Q, pair p, pair q);
this returns the intersection point of the extensions of the line segments
PQ and pq. We find using routines like extension more explicit and less
confusing to new users. But we could be persuaded to add something similar
if someone can justify the need. In the meantime, one can always use the
explicit built-in linear solver solve (see
http://asymptote.sourceforge.net/doc/solve.html), which uses LU
decomposition.


File: asy-faq.info, Node: Question 8.7, Next: Question 8.8, Previous: Question 8.6, Up: Section 8

Question 8.7.  What is the equivalent for the MetaPost command for lray - horiz*v - verti*u = whatever*(LightSource - R), a system of three linear equations for three unknowns: horiz, verti, whatever?

Since horiz*v+verti*u spans a plane, you could use
real intersect(vector P, vector Q, vector n, vector Z);
to find the intersection time for the line  lray-whatever*(LightSource -
R) and then extract the three desired values from there. (You'll still
need to use the built-in explicit linear solver to solve a 2x2 system to
get  horiz and verti.)


File: asy-faq.info, Node: Question 8.8, Next: Question 8.9, Previous: Question 8.7, Up: Section 8

Question 8.8.  In MetaPost, it is possible to have a drawing remain the same size in different pictures by defining a unit u and explicitly multiply all the coordinates by u. Is there a better way to do this in Asymptote?

Yes, Asymptote has a better way: you definitely don't want to manually
scale  all of your coordinates. To make the user coordinates represent
multiples of exactly 1cm:

unitsize(1cm);
draw(unitsquare);
One can also specify different x and y unit sizes:

unitsize(x=1cm,y=2cm);
draw(unitsquare);
Another way is to draw your fixed size object to a frame and add it to
currentpicture like this:

path p=(0,0)--(1,0);
frame object;
draw(object,scale(100)*p);
 
add(object);
add(object,(0,-10));
To understand the difference between frames and pictures, try this:

size(300,300);
 
path p=(0,0)--(1,0);
picture object;
draw(object,scale(100)*p);
 
add(object);
add(object,(0,-10)); // Adds truesize object to currentpicture 

File: asy-faq.info, Node: Question 8.9, Next: Question 9.1, Previous: Question 8.8, Up: Section 8

Question 8.9.  In MetaPost, one could produce tiling pictures by generating a picture, and then clipping the picture to a rectangle of fixed dimensions around the center of the picture. How is that done in Asymptote?

If you are using currentpicture the way one would in MetaPost (drawing in
raw PostScript coordinates), you can simply do something like:

fill((0,0)--(100,100)--(200,0)--cycle);
 
pair center(picture pic=currentpicture) {return 0.5*(pic.min()+pic.max());} 
 
real height=100;
real width=100;
pair delta=0.5(width,height);
pair c=center();
clip(box(c-delta,c+delta));
However, drawing in PostScript coordinates is often inconvenient. Here's
the  Asymptote way of doing the same thing, using deferred drawing:

size(200,100);
fill((0,0)--(1,1)--(2,0)--cycle);
 
void clip(picture pic=currentpicture, real width, real height) 
{
  pic.clip(new void (frame f, transform) { 
    pair center=0.5(min(f)+max(f));
    pair delta=0.5(width,height);
    clip(f,box(center-delta,center+delta));
  });
} 
 
clip(100,100);
See also the discussion of tilings in the documentation:
http://asymptote.sourceforge.net/doc/Pens.html.


File: asy-faq.info, Node: Section 9, Previous: Section 8, Up: Top

Questions about output

* Menu:
* Question 9.1::    How can I disable automatic invocation of the PS
                    viewer after an asy file is done processing?
* Question 9.2::    How do I output jpeg images?
* Question 9.3::    Can I embed bitmaps (photos) into my drawings and
                    position and scale them?
* Question 9.4::    Does Asymptote support direct PDF output?
* Question 9.5::    How to I produce large pictures of high quality in
                    raster format (e.g. png, giff etc).
* Question 9.6::    Is it possible to produce multi-page documents with
                    asymptote?



File: asy-faq.info, Node: Question 9.1, Next: Question 9.2, Previous: Question 8.9, Up: Section 9

Question 9.1.  How can I disable automatic invocation of the PS viewer after an asy file is done processing?

It's actually not on by default, unless you happen to be using Microsoft
Windows (because that is what most Microsoft Windows users expect).
Microsoft Windows users can turn this feature off with the command-line
option -noV or by putting

import settings;
interactiveView=false;
batchView=false;
in their config.asy file. See
http://asymptote.sourceforge.net/doc/Options.html.


File: asy-faq.info, Node: Question 9.2, Next: Question 9.3, Previous: Question 9.1, Up: Section 9

Question 9.2.  How do I output jpeg images?

If you have the ImageMagick convert program installed, simply type

asy -f jpg test.asy 

File: asy-faq.info, Node: Question 9.3, Next: Question 9.4, Previous: Question 9.2, Up: Section 9

Question 9.3.  Can I embed bitmaps (photos) into my drawings and position and scale them?

Convert them to eps format and use the graphic(string) function just like
a Label:

label(graphic("file"),(0,0));
See the example http://asymptote.sourceforge.net/gallery/orthocenter.asy
and http://asymptote.sourceforge.net/doc/label.html.


File: asy-faq.info, Node: Question 9.4, Next: Question 9.5, Previous: Question 9.3, Up: Section 9

Question 9.4.  Does Asymptote support direct PDF output?

Yes, PDF output can be produced by the -f pdf option or -tex pdflatex
option.  This supports transparency, annotations, embedded movies, and
U3D/PRC content.


File: asy-faq.info, Node: Question 9.5, Next: Question 9.6, Previous: Question 9.4, Up: Section 9

Question 9.5.  How to I produce large pictures of high quality in raster format (e.g. png, giff etc).

Try using some of the options to convert, mainly -geometry and -density.
For example:
convert -geometry 1000x3000 example.eps example.png 
You can also change the default resolution of the image with:
convert -geometry 1000x3000 -density 300 -units PixelsPerInch example.eps example.png 
This does not change the number of pixels in the image, but just gives a
hint  as to how large each pixel should be displayed.

If you include the -density option without the -geometry option, convert
will  keep the image size constant (so a 4cm x 3cm eps figure will
generate a 4cm x 3cm png  image).


File: asy-faq.info, Node: Question 9.6, Previous: Question 9.5, Up: Section 9

Question 9.6.  Is it possible to produce multi-page documents with asymptote?

Yes, simply call the newpage() function. This is used by the slide.asy
package to produce high-quality slide presentations (easier to use than
Prosper).