path: root/Master/texmf-dist/chktex/chktexrc

##
##  ChkTeX, example resource file for ChkTeX.
##  Copyright (C) 1995-96 Jens T. Berger Thielemann
##
##  This program is free software; you can redistribute it and/or modify
##  it under the terms of the GNU General Public License as published by
##  the Free Software Foundation; either version 2 of the License, or
##  (at your option) any later version.
##
##  This program is distributed in the hope that it will be useful,
##  but WITHOUT ANY WARRANTY; without even the implied warranty of
##  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
##  GNU General Public License for more details.
##
##  You should have received a copy of the GNU General Public License
##  along with this program; if not, write to the Free Software
##  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
##  Contact the author at:
##      Jens Berger
##      Spektrumvn. 4
##      N-0666 Oslo
##      Norway
##      E-mail: <jensthi@ifi.uio.no>
##

#####################################################################
#
# Note:   The  format  has  changed  slightly  (again).  The { ...  }
# syntax does now mean case-sensitive comparing, while [ ...  ] means
# case-insensitive   comparing  of  the  keywords.   Case-insensitive
# comparing  of  the  keywords  is  only  supported  on  a few of the
# keywords  (it's not meaningful in all contexts, and it slows ChkTeX
# down).  Keywords supporting this are marked throughout the file.
#
# You  may  also reset a list by saying "KEYWORD = { ...  }"; it will
# then be set equal to the contents of the list you specify.
#
# Comments  begin  with  `#', and continues for the rest of the line.
# Blank lines plus leading and trailing spaces are of course ignored.
#
# The general format of this file is the following:
#
# KEYWORD { item item ...} [ item item ... ] /* Adds items */
#
# KEYWORD [ item item ...] { item item ... } /* Adds items */
#
# KEYWORD = item
#
# KEYWORD = { item item ... } /* Clears list before adding */
#
# KEYWORD = [ item item ... ] /* Clears list before adding */
#
# This  does  _not_  mean  that  you may alternate the forms; certain
# keywords  demands  a  list, other a single value.  You thus have to
# look at the examples of their use.
#
# Please  also  note  that if you specify a list-keyword twice, we'll
# concatenate the lists.   If you specify a item-keyword twice, we'll
# kill the previous value.
#
# We  are  slightly  context-sensitive when detecting tokens like "}"
# and "]"; they have to be preceded by a space.  This generally makes
# life easier.
#
# Items  are separated by spaces.  Newlines are considered as spaces,
# but  can't be escaped.  You may surround items with quotes (`"') to
# easily put spaces into them.
#
# Escape sequences available:
#
#   Sequence        Resulting character
#   !               A space (type `! ', not just a exclamation mark)
#   !"              "
#   !#              #
#   !!              !
#   !{              {
#   !}              }
#   ![              [
#   !]              ]
#   !=              =
#   !b              Backspace
#   !n              New line
#   !r              Carriage return
#   !t              Tab
#   !f              Form feed
#   !xNN            NN must be a hexadecimal number (00 - ff),
#                   _both_ characters must be included.
#   !dNNN           DDD must be a decimal number (000 - 255), all
#                   three characters must be included. Unspecified
#                   results if DDD > 255.
#   !NNN            DDD must be a octal number (000 - 377), all
#                   three characters must be included. Unspecified
#                   results if DDD > 377.
#
# Minor  note:   As  you  can see, most of these escape sequences are
# equal  to  those  in  C  (with  some extensions); however, we use !
# instead of \ as escape character for obvious reasons.
#
#
# Quick summary of keywords follows.  Keywords marked with a * accept
# keywords accepting case-insensitive lists.
#
#   Abbrev*     - A list of abbreviations not automatically caught.
#   CenterDots  - Commands/characters  which  should  have  \cdots in
#                 between.
#   CmdLine     - Default   commandline   options.    These  will  be
#                 processed  before  the ones you give on the command
#                 line.
#   HyphDash   \
#   NumDash     - Number of dashes allowed in different contexts.
#   WordDash   /
#   IJAccent    - Commands   which   puts   an  accent  _over_  their
#                 argument.
#   Italic      - Commands immediately turning on italic mode.
#   ItalCmd     - Commands putting their argument into italic.
#   Linker      - Commands  which should have a non-breaking space in
#                 front.
#   LowDots     - Commands/characters  which  should  have  \ldots in
#                 between.
#   MathEnvir   - Environments which turn on math mode.
#   MathCmd     - Commands which turn on math mode.
#   TextCmd     - Commands which turn off math mode.
#   MathRoman   - Mathematical   operators   with  LaTeX  replacement
#                 defined.
#   NoCharNext  - Insists on that certain commands aren't followed by
#                 certain characters.
#   NonItalic   - Commands immediately turning off italic mode.
#   NotPreSpaced- Commands  which should not have a space in front of
#                 them.
#   Primitives  - Primitive TeX commands.
#   PostLink    - Commands which generates a page reference.
#   OutFormat   - Formats  to use for output.  See the -f & -v switch
#                 in the main doc.
#   QuoteStyle  - Either  "Traditional"  or "Logical".  See main doc,
#                 warning 38.
#   Silent      - These  commands  do not produce any textual output;
#                 and are thus allowed to have a space after them.
#   TabSize     - Tab size you are using.
#   TeXInputs   - Paths to search \input and \include files for.
#   UserWarn*   - These  strings  will be searched for throughout the
#                 text.
#   VerbEnvir   - Environments which contents should be ignored.
#   VerbClear   - String we will overwrite unwanted data with.
#   WipeArg     - Commands  (with  arguments) which should be ignored
#                 in the checking.
#


#####################################################################
#
# Enter which type of  quote-style you are using here.  Currently, we
# support the following styles:
#
#  Style        Example of use
#  Traditional  "An example," he said, "would be great."
#  Logical      "An example", he said, "would be great".
#

QuoteStyle = Logical

#####################################################################
#
# Enter  here what interval you have between your tabs.  Only regular
# intervals are supported.
#

TabSize = 8

#####################################################################
#
# Here, you can put default commandline options; most users would for
# instance like to put -v2 here.
#

CmdLine
{

}

#####################################################################
#
# These  patterns  will  be  searched for through the text; no matter
# whether   they   appear  as  normal  text,  commands  or  whatever.
# Currently case-sensitive.  They are not found in comments.
#
# I usually define a special command like this:
#
# \def\unknown{\large\bf??}
#
# which  I use whenever there is some information I don't have at the
# moment of writing.  Thus, it makes sense to search for it.
#
# You should be able to develop your own uses for this.
#

UserWarn
{

    \unknown
###
#
# Another example; one should write \chktex or Chk\TeX - never ChkTeX.
#
###

    ChkTeX
}
[

###
#
# You may put case-insensitive patterns here.
#
###

]


###
#
# These patterns will be searched for, no matter whether they appear
# as normal text, commands or arguments.  However, they will _not_
# match in verbatim environments.
#
# Remember that you have to escape (with a !) the following
# characters: "#!= as well as spaces and {}[] if they are proceeded by
# a space.
#
# Since these are PCRE regular expressions, you can use (?i) to make
# the expression case insensitive.  See the man pages (man pcresyntax)
# or the nicely formatted http://perldoc.perl.org/perlre.html for
# documentation on the regular expression syntax.  Note however that
# some the features of perl regular expression are not available such
# as running code (callouts), and replacing.
#
# An initial PCRE comment (?# ... ) can be used change what is
# displayed, thereby reminding yourself how to fix the problem.
#
###
UserWarnRegex
{

  (?!#Always! use! \nmid)\\not! *(\||\\mid)

  # capitalize section when saying Section 6.
  (?!#-1:Capitalize! before! references)PCRE:\b(chapter|(sub)?section|theorem|lemma|proposition|corollary|appendix)~\\ref
  (?!#1:Capitalize! before! references)POSIX:([^[:alnum:]]|^)(chapter|(sub)?section|theorem|lemma|proposition|corollary|appendix)~\\ref

  # spell it out.
  PCRE:(?i)\bintro\b(?!#Spell! it! out.! This! comment! is! not! used.)
  POSIX:([^[:alnum:]]|^)intro([^[:alnum:]]|$)

  # Pretty tables--see http://texdoc.net/texmf-dist/doc/latex/booktabs/booktabs.pdf
  (?!#-2:Use! \toprule,! midrule,! or! \bottomrule! from! booktabs)\\hline
  # This relies on it being on a single line, and not having anything
  # else on that line.  With PCRE we could match balanced [] and {},
  # but I wonder if it's worth the complexity...
  (?!#-2:Vertical! rules! in! tables! are! ugly)\\begin\{(array|tabularx?\*?)\}(\[.*\])?\{.*\|.*\}

}


#####################################################################
#
# Here you can list the path of where ChkTeX should look for files it
# \inputs.   The  // postfix is now supported; if you append a double
# path-separator we'll recursively search that directory directories.
# MS-DOS users must append \\ instead, e.g.  "C:\EMTEX\\".
#
# If you under either MS-DOS or UNIX wish to search an entire
# partition or the complete directory tree, you must use *three*
# slashes, e.g. "c:\\\" or "///". This may be considered to be a bug.
#
# By  default,  we'll  search the current directory (not recursively,
# put  "//"  in the list for this); any paths specified below will be
# searched in addition to this.
#

TeXInputs
{

}

#####################################################################
#
# Here you may specify more output formats for use with the -v option,
# it simply indexes  into this list.  Remember to use ! instead of \,
# though.
#
# For explanation of how % fields expand; look at ChkTeX.{dvi,ps,pdf}.
#
# We will by default select entry number _two_ in this list (we count
# from 0), and -v without any parameter selects entry number _three_.
#

OutFormat
{

# -v0; silent mode
%f%b%l%b%c%b%n%b%m!n

# -v1; normal mode
"%k %n in %f line %l: %m!n%r%s%t!n%u!n"

# -v2; fancy mode
"%k %n in %f line %l: %m!n%r%i%s%I%t!n!n"

# -v3; lacheck mode
"!"%f!", line %l: %m!n"

# -v4; verbose lacheck mode
"!"%f!", line %l: %m!n%r%s%t!n%u!n"

# -v5; no line number, ease auto-test
"%k %n in %f: %m!n%r%s%t!n%u!n"

# -v6; emacs compilation mode
"!"%f!", line %l.%c:(#%n) %m!n"

}



#####################################################################
#
# These commands should  be ignored when detecting  whether a command
# is ended by a space.  You can specify regular expressions in the []
# section in  case you  have many  custom macros  that can  be safely
# terminated with a space.
#

Silent
{
    \rm \em \bf \it \sl \sf \sc \tt \selectfont
    \rmfamily \sffamily \ttfamily \mdseries \bfseries
    \slshape \scshape \relax
    \vskip \pagebreak \nopagebreak

    \textrm \textem \textbf \textit \textsl \textsf \textsc \texttt

    \clearpage \ddots \dotfill \flushbottom \fussy \indent \linebreak
    \onecolumn \pagebreak \pushtabs \poptabs \scriptsize \sloppy
    \twocolumn \vdots
    \today \kill \newline \thicklines \thinlines

    \columnsep \space \item \tiny \footnotesize \small \normalsize
    \normal \large \Large \LARGE \huge \Huge \printindex

    \newpage \listoffigures \listoftables \tableofcontents
    \maketitle \makeindex

    \hline \hrule \vrule

    \centering

    \bigskip \medskip \smallskip

    \noindent \expandafter

    \makeatletter \makeatother

    \columnseprule

    \textwidth \textheight \hsize \vsize

    \if \fi \else

    \csname \endcsname

    \z@ \p@ \@warning \typeout

    \dots \ldots \input \endinput \nextline \leavevmode \cdots
    \appendix \listfiles \and \quad
    \hskip \vfill \vfil \hfill \hfil \topmargin \oddsidemargin
    \frenchspacing \nonfrenchspacing
    \begingroup \endgroup \par

    \vrefwarning \upshape \headheight \headsep \hoffset \voffset
    \cdot \qquad
    \left \right
    \qedhere

    \xspace

    \addlinespace \cr \fill \frontmatter
    \toprule \midrule \bottomrule

}[
# Here you can put regular expressions to match Silent macros.  It was
# designed for  the case where you  have many custom macros  sharing a
# common prefix, but can of course be used for other things.

# \\my.*
]

#####################################################################
#
# Here,  you  can  specify the length of various dashes.  We sort the
# dash according to which type of characters that are on the left and
# right of it.  We are only conclusive if they are the same.
#
# We associate as follows:
#
#     Name        Type of character on each side
#     HyphDash    Alphabetic (foo-bar)
#     NumDash     Numeric (2--3)
#     WordDash    Space (like this --- see?)
#
# Below you specify how many dashes which are legal in each case.  We
# define 0 as  a magic constant which always generates an error.  You
# may specify more than one legal dash-length.
#
# Let's look at an example.  You use the following dash-syntax:
#
#     foo-bar
#     2--3
#     like this---see?
#
#
# HYPHDASH { 1 3 }        # Either a hyphen, or inter-word
# NUMDASH { 2 }           # Between words
# WORDDASH { 0 }          # We never use this
#

HyphDash
{
    1 3
}

NumDash
{
    2
}

WordDash
{
    3
}

#####################################################################
#
# This  keyword  indicates commands  whose argument isn't LaTeX code,
# and thus should be ignored.
#
# After  the command,  you may  place  arguments that  you wish  that
# should be wiped  in the process; use [] for  optional arguments, {}
# for  required ones  and *  if the  command supports  an alternative
# variant.  These should be separated  from the command with a colon.
# Some  commands (e.g.  \cmidrule)  use ()  to  delimit and  optional
# argument and so this syntax is supported as well.
#
# For  instance,  if  you would like to wipe the \newcommand command,
# you would declare it as \newcommand:*[][]{}
#
# These  commands may be "executed" before they're wiped, so you will
# typically also wish to list filehandling commands and similar here.
#

WipeArg
{
    \label:{} \ref:{} \eqref:{} \vref:{} \pageref:{} \index:[]{}
    \cite:[]{} \nocite:{}
    \input:{} \verbatiminput:[]{} \listinginput:[]{}{}
    \verbatimtabinput:[]{} \include:{} \includeonly:{}
    \bibitem:[]{}
    \cline:{} \cmidrule:[](){}
    \href:{}{}
    # Cleveref -- there are many others that could be here as well...
    \cref:*{} \cpageref:*{} \crefrange:*{}{} \cpagerefrange:*{}{}
    \Cref:*{} \Cpageref:*{} \Crefrange:*{}{} \Cpagerefrange:*{}{}
    # natbib
    \citet:*[][]{} \citep:*[][]{} \citealt:*{} \citealp:*[]{} \citeauthor:*{}
    \Citet:*[][]{} \Citep:*[][]{} \Citealt:*{} \Citealp:*[]{} \Citeauthor:{}
    \citetext:{} \citeyear:*{} \citeyearpar:{}
}

#####################################################################
#
# These environments contain material which will be typeset as
# mathematics by LaTeX.  This turns on/off some warnings.
#
# We will automagically append a * to each keyword.
#

MathEnvir
{
    displaymath math eqnarray array equation
    align alignat gather flalign multline
}

#####################################################################
#
# These commands contain material which will be typeset as mathematics
# by LaTeX.  The commands are assumed to have one mandatory argument
# which is in math mode.  This turns on/off some warnings.
#

MathCmd
{
    \ensuremath
}

#####################################################################
#
# These commands contain material which will _not_ be typeset as
# mathematics by LaTeX even if it would otherwise be in mathmode.  The
# commands are assumed to have one mandatory argument which is in text
# mode.  This turns on/off some warnings.
#

TextCmd
{
    \text \intertext \shortintertext \mbox
}

#####################################################################
#
# These  environments  contains  material  which  contents  should be
# ignored.
#
# We will automagically append a * to each keyword.
#

VerbEnvir
{
    verbatim comment listing verbatimtab rawhtml errexam picture texdraw
    filecontents pgfpicture tikzpicture
}

#####################################################################
#
# ChkTeX  does  automagically  catch  most abbreviations; the ones we
# need  to  list here, are those which are most likely to be followed
# by a word with an upper-case letter (that is not the beginning of a
# new sentence).
#
# The case-insensitive abbreviations are not really case-insensitive,
# it seems to be more  practical to  only let  the first character be
# case-insensitive, while the remaining are case-sensitive.
#
# To  speed  up the searching process somewhat, we require that these
# end in a `.', this should not be a problem.
#
# Much  of  this  work (both the abbreviations below, and the regexps
# necessary  to catch the remaining automatically) have been provided
# by Russ Bubley, <russ@scs.leeds.ac.uk>.
#

Abbrev
{
# Ordinals
1st. 2nd. 3rd. 4th.
# Titles
Mr. Mrs. Miss. Ms. Dr. Prof. St.

#
# Days
# Mon. Tue. Wed. Thu. Fri. Sat. Sun.
#
# Months
# Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec.
#
# Letters
# Kt. Jr.
#
# Corporate
# Co. Ltd.
#
# Addresses
# Rd. Dr. St. Ave. Cres. Gdns. Sq. Circ. Terr. Pl. Arc. La. Clo. Ho. Est. Gn.
#
# Misc.
# oe. pbab. ps. rsvp. Tx.
}
[
###
#
# The first letter is case-insensitive in the abbrevs in this
# list. Due to the nature of the checking algorithm used for
# this, entries consisting of only one character will be
# silently ignored.
#
##

# Latin
# cf. "et al." etc. qed. qv. viz.
#
# Corporate
# inc. plc.
#
# Misc
# fax. pcs. qty. tel. misc.
]

#####################################################################
#
# Commands which accent characters, meaning that \i or \j (\imath and
# \jmath in mathmode) should be used instead of `i' and `j'
#

IJAccent
{
    \hat \check \breve \acute \grave \tilde \bar \vec \dot \ddot

    \' \` \^ \" \~ \= \. \u \v \H \t

###
#
# The  remaining  accent commands (\c,\d,\b) put their accent _under_
# the  character,  not above, and should thus be used with normal i's
# and j's.
#
###

}

#####################################################################
#
# Commands   which,  when  the  group  is  terminated,  needs  italic
# correction.
#

Italic
{
    \it \em \sl
    \itshape \slshape
}

#####################################################################
#
# Commands which makes the font non-italic.
#

NonItalic
{
    \bf \rm \sf \tt \sc
    \upshape
}

#####################################################################
#
# Commands which  put their argument  into italic (and  thus possibly
# needs italic correction in the end).
#
# This is currently  empty, since \textit, \textsl and  \emph do that
# automatically.
#

ItalCmd
{
}

#####################################################################
#
# These  commands  all have in common that a pagebreak right in front
# of  them  is  highly  undesirable; thus there should be no space in
# front of them.
#

PostLink
{
    \index \label
}

#####################################################################
#
# These commands should not have a space in front of them for various
# reasons.   I.e.   much  the  same as POSTLINK, but produces another
# warning.
#

NotPreSpaced
{
    \footnote \footnotemark \/
}

#####################################################################
#
# The  commands  listed  here,  should be prepended with a `~', as in
# "look  in  table~\ref{foo}", to avoid the references being split
# across lines.
#

Linker
{
    \ref \vref \pageref \eqref \cite
}

#####################################################################
#
# Commands/characters  which  should  have  \cdots  in  between, e.g.
# $1+2+3+\cdots+n$.
#

CenterDots
{
    = + - \cdot \div & \times \geq \leq < >
}

#####################################################################
#
# Commands/characters  which  should  have  \ldots  in  between, e.g.
# $1,2,3,\ldots,n$.
#

LowDots
{
    . , ;
}

#####################################################################
#
# In maths mode, there are certain aliases for mathematical operators
# like  sin, cos, etc.  Ignore the leading backslash in the commands,
# and so forth.  You should list these below.
#

MathRoman
{
    log lg ln lim limsup liminf sin arcsin sinh cos arccos cosh tan
    arctan tanh cot coth sec csc max min sup inf arg ker dim hom det
    exp Pr gcd deg bmod pmod mod
}

#####################################################################
#
# These  TeX commands  have become  unnecessary, as  there are  LaTeX
# commands that  does the same.   Purists should thus avoid  these in
# their code.
#
# (These are a spell-corrected version of those lacheck uses).
#

Primitives
{
   \above \advance \catcode \chardef \closein \closeout \copy \count
   \countdef \cr \crcr \csname \delcode \dimendef \dimen \divide
   \expandafter \font \hskip \vskip \openout
}

#####################################################################
#
# Format: \command:characters
#
# We'll emit a warning if any of characters are found after the
# command.
#

NoCharNext
{
   \left:{}$ \right:{}$
}

#####################################################################
#
# We're killing \verb@...@ commands and the arguments of the commands
# listed above in WipeArg by overwriting them with a string or a
# single character.
#
# This should not  contain an alphabetic character (in  case the user
# writes  (\foo\verb@bar@),  neither  should  it contain  be  one  of
# LaTeX's  reserved  characters  (`#$%&~_^\{}'), or  any  parenthesis
# character  ('()[]{}').   If  possible,   don't  use  a  punctuation
# character, either, or any spacing character.
#
# The asterisk is also unsuitable, as some commands behave in another
# way if  they are  appended with  an asterisk.   Which more  or less
# leaves us with the pipe.
#
# Please  note  that  this  may  also  be  a  _string_, which will be
# repeated until the proper length is reached.
#

VerbClear = "|"

#
# All for now - have fun.
#
#####################################################################