summaryrefslogtreecommitdiff
path: root/Master/texmf-dist
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist')
-rw-r--r--Master/texmf-dist/doc/latex/fancyhdr/README2
-rw-r--r--Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdfbin787804 -> 851692 bytes
-rw-r--r--Master/texmf-dist/source/latex/fancyhdr/fancyhdr.dtx208
-rw-r--r--Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty4
-rw-r--r--Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty20
-rw-r--r--Master/texmf-dist/tex/latex/fancyhdr/fancyheadings.sty2
6 files changed, 155 insertions, 81 deletions
diff --git a/Master/texmf-dist/doc/latex/fancyhdr/README b/Master/texmf-dist/doc/latex/fancyhdr/README
index cd07feba895..e44d05f032f 100644
--- a/Master/texmf-dist/doc/latex/fancyhdr/README
+++ b/Master/texmf-dist/doc/latex/fancyhdr/README
@@ -25,7 +25,7 @@ In order to latex the documentation you need to have a copy of
boxedminipage.sty (CTAN:/macros/latex/contrib/boxedminipage) and
refcount.sty (CTAN:/macros/latex/contrib/oberdiek/) installed.
-This is version 4.0.1 of fancyhdr.sty and extramarks.sty. They are
+This is version 4.0.2 of fancyhdr.sty and extramarks.sty. They are
described in the forthcoming third edition of The LaTeX Companion.
Extramarks.sty has not been changed, except for the version and
copyright information.
diff --git a/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf b/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf
index b4396fbd3b2..2138e986d7d 100644
--- a/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf
+++ b/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/latex/fancyhdr/fancyhdr.dtx b/Master/texmf-dist/source/latex/fancyhdr/fancyhdr.dtx
index d2a6dc96119..41e7ebb5988 100644
--- a/Master/texmf-dist/source/latex/fancyhdr/fancyhdr.dtx
+++ b/Master/texmf-dist/source/latex/fancyhdr/fancyhdr.dtx
@@ -1,6 +1,6 @@
% \iffalse meta-comment
%
-% Copyright (C) 1994-2021 by Pieter van Oostrum <pieter@vanoostrum.org>
+% Copyright (C) 1994-2022 by Pieter van Oostrum <pieter@vanoostrum.org>
% -------------------------------------------------------
%
% This file may be distributed and/or modified under the
@@ -26,11 +26,11 @@
%<fancyhdr>\ProvidesPackage{fancyhdr}%
%<fancyheadings>\ProvidesPackage{fancyheadings}
%<extramarks>\ProvidesPackage{extramarks}
-%<fancyhdr|fancyheadings|extramarks> [2021/01/28 v4.0.1
+%<fancyhdr|fancyheadings|extramarks> [2022/05/10 v4.0.2
%<fancyhdr> Extensive control of page headers and footers]%
%<fancyheadings> Legacy package to call fancyhdr]
%<extramarks> Extra marks for LaTeX]
-%<fancyhdr|extramarks>% Copyright (C) 1994-2021 by Pieter van Oostrum <pieter@vanoostrum.org>
+%<fancyhdr|extramarks>% Copyright (C) 1994-2022 by Pieter van Oostrum <pieter@vanoostrum.org>
%<fancyheadings>% Public domain
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \end{macrocode}
@@ -46,8 +46,8 @@
\usepackage{boxedminipage}
\usepackage{fourier-orns}
\usepackage[T1]{fontenc}
-\usepackage{url}
\usepackage[fit]{truncate}
+\usepackage[hyphens]{url}
\usepackage[colorlinks,linktocpage]{hyperref}
\usepackage{ifthen}
\usepackage{fancyhdr}
@@ -674,57 +674,68 @@
% and later\footnote{This comes from the \Package{nccfancyhdr}
% package by Alexander I. Rozhenko.}.
%
-% The marks in a fancy header and footer are prepared using \cs{parbox}
-% command. So, you can use multiline marks. In the header, they are
+% The fields in a fancy header and footer are prepared using \cs{parbox}
+% command. So, you can use multiline fields. In the header, they are
% aligned to the bottom line, but, in the footer, they are aligned to
-% the top line. The maximum width of every mark is equal to the
-% \cs{headwidth}. This can lead to overlapping of neighbouring marks.
+% the top line. The maximum width of every field is equal to the
+% \cs{headwidth}. This can lead to overlapping of neighbouring fields.
%
-% \DescribeMacro{\fancycenter}
-% If you want to prepare marks in more traditional way in a line
+% \CmdIndex{fancycenter}
+% If you want to prepare headers/footers in more traditional way in a line
% not exceeding the \cs{headwidth}, you can use
-% the following command in any mark command:
+% the following command in any header/footer command:
% \begin{quote}
% \cs{fancycenter}\oarg{distance}\oarg{stretch}\\
-% \verb| |\marg{left-mark}\marg{center-mark}\marg{right-mark}
+% \verb| |\marg{left-field}\marg{center-field}\marg{right-field}
% \end{quote}
% \CmdIndex{fancycenter}
% This command works like
% \begin{center}
-% \verb|\hbox to\linewidth{|\marg{left-mark}\cs{hfil}\marg{center-mark}\cs{hfil}\marg{right-mark}\verb|}|
+% \verb|\hbox to\linewidth{|\marg{left-field}\cs{hfil}\marg{center-field}\cs{hfil}\marg{right-field}\verb|}|
% \end{center}
% but does this more carefully trying to exactly center the central part of
% the text if possible. The solution for exact centering
-% is applied if the width of \meta{center-mark} is less than
+% is applied if the width of \meta{center-field} is less than
% \begin{quote}
% \verb|\linewidth - 2*(|\meta{stretch}\verb|*|\meta{distance}\verb| +|\\
-% \verb| max(width(|\meta{left-mark}\verb|), width(|\meta{right-mark}\verb|)))|.
+% \verb| max(width(|\meta{left-field}\verb|), width(|\meta{right-field}\verb|)))|.
% \end{quote}
-% Otherwise the \meta{center-mark} will slightly migrate to a shorter item
-% (\meta{left-mark} or \meta{right-mark}), but at least \meta{distance}
+% Otherwise the \meta{center-field} will slightly migrate to a shorter item
+% (\meta{left-field} or \meta{right-field}), but at least \meta{distance}
% space between all parts of line is provided.
% The default values of \meta{distance} and \meta{stretch}
% are 1em and 3.
%
-% If the \meta{center-mark} is empty, the \cs{fancycenter} is equivalent to
+% If the \meta{center-field} is empty, the \cs{fancycenter} is equivalent to
% the following command:
% \begin{center}
-% \verb|\hbox to\linewidth {|\marg{left-mark}\verb|\hfil |\marg{right-mark}\verb|}|
+% \verb|\hbox to\linewidth {|\marg{left-field}\verb|\hfil |\marg{right-field}\verb|}|
% \end{center}
%
% You would use this in a header for example with
% \begin{quote}
% \verb|\fancyhead[C]{|\cs{fancycenter}\oarg{distance}\oarg{stretch}\\
-% \verb| |\marg{left-mark}\marg{center-mark}\marg{right-mark}\verb|}|
+% \verb| |\marg{left-field}\marg{center-field}\marg{right-field}\verb|}|
% \end{quote}
% and leave the \texttt{[L,R]} parts empty.
%
-% \textbf{Note 1}: If the whole of the \cs{fancycenter} is wider than
-% \cs{headwidth} it will stick out on the right. See
+% \textbf{Note 1}:
+% When \cs{fancycenter} is used inside a header or
+% \CmdIndex{linewidth}%
+% \CmdIndex{headwidth}%
+% footer, \cs{linewidth} usually is the same as \cs{headwidth}. Only
+% when \cs{fancycenter} is used inside a box with a different width,
+% \cs{linewidth} will be the width of that box.
+%
+% \textbf{Note 2}:
+% If the whole of the \cs{fancycenter} is wider than
+% \cs{linewidth} it will stick out on the right. See
% section~\ref{sec:longtitles} for possible solutions.
%
-% \textbf{Note 2}: The usage of \cs{fancycenter} command is not limited to the
-% argument of header/footer marks. You can use it anywhere in your document.
+% \textbf{Note 3}: The usage of the \cs{fancycenter} command is not limited to the
+% argument of headers/footers. You can use it anywhere in your
+% document. Then \cs{linewidth} will be the width of the box or text in
+% which it is used.
%
% \section{An example of two-sided printing}\label{two-sided}
%
@@ -1855,11 +1866,9 @@
% For example
% \begin{verbatim}
% \pagestyle{fancy}
-% \renewcommand{\chaptermark}[1]{\markboth{Chapter \thechapter. ##1}{}}
-% \renewcommand{\sectionmark}[1]{\markright{\thesection\ ##1}}
+% \renewcommand{\chaptermark}[1]{\markboth{Chapter \thechapter. #1}{}}
+% \renewcommand{\sectionmark}[1]{\markright{\thesection\ #1}}
% \end{verbatim}
-% Please note that you have to double the \verb|#| signs, because the
-% definitions are inside a macro.
%
% If the previous page style was one of the standard \LaTeX{} page
% styles, or some page style that is not based on \Package{fancyhdr},
@@ -1880,12 +1889,14 @@
% ...
% \pagestyle{myfancy}
% \end{verbatim}
+% Please note that you now have to double the \verb|#| signs, because the
+% definitions are inside a macro.
%
% In general, when you use only one page style \texttt{fancy} in your
% document, with the occasional \cs{thispagestyle} excursion to page
% style \texttt{plain} or \texttt{empty}, you can just keep the
% definitions globally in your document, but as soon as you use more
-% than one page style, and swicth between them, it is highly advisable
+% than one page style, and switch between them, it is highly advisable
% to define them (including page style \texttt{fancy}) with
% \cs{fancypagestyle} and put all the relevant definitions inside them.
%
@@ -2037,7 +2048,7 @@
% the page where ``This'' appears, or on the page where ``page''
% appears. It depends on the positioning of the \cs{label} command.
% Probably it is safer to make sure the sentence isn't broken. This can
-% be dome by putting the text in a \cs{parbox} or \texttt{minipage} environment.
+% be done by putting the text in a \cs{parbox} or \texttt{minipage} environment.
% \begin{verbatim}
% \noindent
% \begin{minipage}{\textwidth}
@@ -2436,7 +2447,8 @@
% Of course we have to take care of two-sided printing, and we may want to
% have an index page with all the blobs in the correct position. The solution
% requires some hand-tuning to get the blobs nicely spaced out vertically.
-% For the application that I had there were 12 sections, so I made the blobs
+% For the application that I originally designed this for, there were 12 sections,
+% so I made the blobs
% 18 mm apart, i.e. 9~mm blob separated by 9~mm whitespace. In order to avoid
% calculations they are set in a \texttt{picture} environment with the
% \cs{unitlength} set to 18~mm. Page numbers are set in the headers at the
@@ -2521,13 +2533,17 @@
%
% \section{Float placement}
%
+% \textbf{Note: This section is not about \Package{fancyhdr}, but about
+% page layout, especially about the placement of floats.}
+%
% Floats are page elements that float with respect to the rest of the
% document. Standard floats are tables and figures, but with the
+% \TTindex{float}%
% \Package{float} package you can easily make new ones, like algorithms. Most
% of the time floats work satisfactory, but sometimes \LaTeX{} seems too
% stubborn to do what you want. This section describes how you can influence
% \LaTeX{} so that it will do most of the time what you want. There might,
-% however be some pathological cases where it is impossible to convince
+% however, be some pathological cases where it is impossible to convince
% \LaTeX{} to do things your way. In the following we will use figures as an
% example but everything applies to other floats as well.
%
@@ -2537,7 +2553,8 @@
% moves it, usually to the next page.
% \item From a certain point, \LaTeX{} moves all your floats to the end of
% the document or the end of a chapter.
-% \item \LaTeX{} complains about ``Too many floats''.
+% \item \index{Too many floats}%
+% \LaTeX{} complains about ``Too many floats''.
% \end{enumerate}
%
% In the first two cases you must first check if you have given the correct
@@ -2545,7 +2562,7 @@
% specifies that your figure may be placed either: Here (i.e. in the text
% position where the command is given), on the Top of a page (which may be
% the page where you put the command), or on a separate Page of floats. You
-% could also have specified ``b'' for Bottom of the page. The order of the
+% could also have specified ``\texttt{b}'' for Bottom of the page. The order of the
% letters is insignificant, you cannot force \LaTeX{} to try Bottom first
% and then Top by specifying \texttt{[bt]}.
%
@@ -2557,11 +2574,11 @@
% \texttt{[b]} in the position parameter, \latex/ must save it until it has
% enough for a page of floats. So don't specify only \texttt{[h]}. If you
% want to give \latex/ a chance to put the float on a page of floats, you
-% must also specify ``p''.
+% must also specify ``\texttt{p}''.
% \item The placement would violate the constraints imposed by \latex/'s
% float placement parameters. This is one of the most occurring causes and
% it can easily be corrected by changing the parameters. Here is a list of
-% them:
+% them with their default values:
% \end{enumerate}
% \begin{center}
% \CmdIndex{topfraction}
@@ -2595,7 +2612,7 @@
% The values in the righthand column are the defaults for the standard
% \latex/ classes. Other classes could use different defaults. As you see
% with the default values a float will not be put in the bottom of a page if
-% its height is more than 30\% of the page height. So if you specify [hb] for
+% its height is more than 30\% of the page height. So if you specify \texttt{[hb]} for
% a float which is taller it has to move to a float page. But if it is less
% than 50\% of the page height it will have to wait until some more floats
% are given before a float page can be filled to satisfy the
@@ -2637,8 +2654,9 @@
% If in spite of all your attempts \latex/ still moves your floats to the end
% of the document or the end of a chapter, you can insert a \cs{clearpage}
% command. This will start a new page and insert all pending floats before
-% continueing. If it is undesirable to have a pagebreak you can use the
+% continuing. If it is undesirable to have a pagebreak you can use the
% \Package{afterpage} package and the following command:
+% \TTindex{afterpage}\CmdIndex{afterpage}\CmdIndex{clearpage}%
% \begin{verbatim}
% \afterpage{\clearpage}
% \end{verbatim}
@@ -2650,6 +2668,7 @@
% Finally, if you want a float only at the place where you define it, without
% \latex/ moving it whatsoever, you can use the \Package{float} package and
% give the command:
+% \TTindex{float}\CmdIndex{restylefloat}%
% \begin{verbatim}
% \restylefloat{figure}
% \end{verbatim}
@@ -2659,6 +2678,7 @@
% If you want to avoid the unwanted pagebreak, i.e. let
% \LaTeX{} move the float only if it doesn't fit on the page, then use the
% \Package{afterpage} package with:
+% \TTindex{afterpage}\CmdIndex{afterpage}\CmdIndex{clearpage}%
% \begin{verbatim}
% \afterpage{\clearpage \begin{figure}[H] ... \end{figure}}
% \end{verbatim}
@@ -2668,11 +2688,22 @@
% collecting too many of them. The solutions given above, especially those
% with \cs{clearpage} in them will usually help. In some cases there
% really are too many floats, as \latex/ has a limited number of ``boxes'' to
-% store the floats. The package \Package{morefloats} can be used to increase
+% store the floats. The package
+% \TTindex{morefloats}%
+% \Package{morefloats} can be used to increase
% this number. If you need still more then you must edit a private copy of
% this file, but even then there will be some limit that you cannot pass.
% Then your only resort will be to change your document.
%
+% A much more elaborate article about float placement by Frank
+% Mittelbach appeared in 2014 in TUGboat\footnote{%
+% Frank Mittelbach, \emph{How to influence the position of float
+% environments like figure and table in LATEX?}, TUGboat, Volume 35
+% (2014), No. 3, pp. 248–254.\\
+% \url{https://www.latex-project.org/publications/2014-FMi-TUB-tb111mitt-float-placement.pdf}
+% \\Also on Stackexchange:\\
+% \url{https://tex.stackexchange.com/questions/39017/how-to-influence-the-position-of-float-environments-like-figure-and-table-in-lat}}.
+%
% \section{Multipage Floats}
%
% \LaTeX's floats cannot be split across pages. Sometimes, however, you want
@@ -2680,8 +2711,8 @@
% to split these into multiple table or figure environments, but this has a
% number of undesirable effects:
% \begin{itemize}
-% \item Where do you split it? This is in general more difficult for tables
-% than for figures.
+% \item Where do you split it? This is generally a more difficult decision
+% for tables than for figures.
% \item How do you keep them together?
% \item You don't want more than one entry in the list of figures/tables.
% \end{itemize}
@@ -2708,7 +2739,7 @@
% to include it in an \cs{afterpage} command (using the \Package{afterpage}
% package). As a \texttt{longtable} is by definition large, it is best to put
% it in a separate file, and \cs{input} it in the \cs{afterpage} command:
-% \CmdIndex{afterpage}
+% \CmdIndex{afterpage}\TTindex{afterpage}\CmdIndex{clearpage}%
% \begin{verbatim}
% \afterpage{\input{mytable}}
% \end{verbatim}
@@ -2721,8 +2752,8 @@
%
% \subsection{Figures}
%
-% There isn't an equivalent \texttt{longfigure} solution, so for figures you
-% will usually have to split it yourself. In general this is less of a
+% There isn't an equivalent ``\texttt{longfigure}'' solution, so for figures you
+% will have to split yourself. In general this is less of a
% problem. However, the problem you get now is how to keep them together,
% i.e. how to get the parts on subsequent pages, and how to get a single
% entry in the list of figures.
@@ -2732,7 +2763,8 @@
% to use only the \texttt{[p]} placement, so that they will be put on
% floatpages. As they are bigger than a page this is appropriate. The first
% part would then get a \cs{caption}, the subsequent parts would be used
-% without a caption. If you want to add a caption-like text, enter it as
+% without a caption, or a caption that will not go to the list of figures.
+% If you want to add a caption-like text, enter it as
% normal text rather than a \cs{caption}, so that it will not be entered in
% the list of figures. It may also be desirable to issue a \cs{clearpage}
% first, just like we did for the \texttt{longtable}, and to encapsulate this
@@ -2764,6 +2796,8 @@
% If you want your multipage figure to start at a lefthand-side
% (even-numbered) page you can use a test in the \cs{afterpage} command
% (using the \Package{ifthen} package):
+% \CmdIndex{afterpage}
+% \CmdIndex{ifthenelse}
% \begin{verbatim}
% \afterpage{\clearpage
% \ifthenelse{\isodd{\value{page}}{\afterpage{\input{myfigure}}} % odd page
@@ -2855,7 +2889,7 @@
% Bugs and suggestions for improvements can be reported at\\
% \url{https://github.com/pietvo/fancyhdr/issues}\\
% Example files can be found at\\
-% \url{https://github.com/pietvo/fancyhdr/tree/Examples}
+% \url{https://github.com/pietvo/fancyhdr-examples}
%
% \section{Version information}
% \begin{itemize}
@@ -2867,8 +2901,8 @@
% \item References to older \LaTeX{} versions removed.
% \item Removed obsolete source code of \Package{extramarks.sty}
% \item Changed font commands to \cs{textbf} and \cs{textsl}.
-% \item Added description of the \cs{fancy\ldots offset} commands.
-% \item Added various \cs{\ldots xmark} commands from \Package{extramarks.sty}.
+% \item Added description of the \Cmd{fancy\ldots offset} commands.
+% \item Added various \Cmd{\ldots xmark} commands from \Package{extramarks.sty}.
% \item Various corrections applied.
% \item Updated contact information.
% \item Added Version information. :)
@@ -2946,6 +2980,19 @@
% \item Some documentation corrections, especially in sections
% \ref{sec:xmarks} and \ref{sec:movie}.
% \end{itemize}
+% \item Version 4.0.2, May 9, 2022
+% \begin{itemize}
+% \item Added \cs{leavevmode}\cs{ignorespaces} to each header/footer
+% field. The \cs{leavevmode} prevents a bug when a field starts with a
+% \cs{color} command. The \cs{ignorespaces} skips initial spaces in
+% the parameter, as is usual in a \cs{parbox}, for backwards
+% compatibility. However, there are some rare cases where spurious
+% spaces can still show up in the header/footer fields. In that case
+% the user will have to eliminate these.
+% \item Cleanup the documentation of the \cs{fancycenter} command.
+% \item Miscellaneous small documentation changes.
+% \item Make \cs{fancyhead} etc. \cs{long}.
+% \end{itemize}
% \end{itemize}
%
%
@@ -2961,11 +3008,11 @@
% gradually.
%
%
-% \section{Large chapter/section titles}
+% \section{Long chapter/section titles}
% \label{sec:longtitles}
%
% \index{long titles}
-% Sometimes a chapter or section title is too large to fit in the header
+% Sometimes a chapter or section title is too long to fit in the header
% or footer. It may take more than one line in the header/footer, or it
% may overwrite other parts. How can we shorten these titles in the
% header/footer without changing the actual title?
@@ -2998,8 +3045,8 @@
% \subsection{Using optional arguments}
%
% As we have seen in section~\ref{sec:scoop}, the header info comes from
-% the marks. So if we want the text in the header to be smaller we have
-% to supply smaller marks. This can be done by giving these as optional
+% the marks. So if we want the text in the header to be shorter we have
+% to supply shorter marks. This can be done by giving these as optional
% arguments in the \cs{chapter} and \cs{section} commands.\footnote{At
% least in the \texttt{book} and \texttt{report} documentclasses. In the
% \texttt{article} class this would be the \cs{section} and
@@ -3011,7 +3058,7 @@
% {This is a very long section title that will not fit in the header}
% \end{verbatim}
% The short titles will now appear in the header. However, these will
-% also appear in the table of contents. If that is what you want than
+% also appear in the table of contents. If that is what you want then
% you are ready. But if you want to use the long titles in the table of
% contents, you have to use some trickery. In particular you have to
% supply the marks yourself.
@@ -3078,7 +3125,8 @@
% \Sectioniii{Text title}{Header title}{TOC title}
% \end{verbatim}
% Please note that if you use the \texttt{article} class, instead of
-% \cs{chaptermark} and \cs{sectionmark}, you would probably use \cs{sectionmark}\cs{subsectionmark}.
+% \cs{chaptermark} and \cs{sectionmark}, you would probably use
+% \cs{sectionmark} and \cs{subsectionmark}.
%
% \subsection{Using automatic truncation}
%
@@ -3113,7 +3161,9 @@
% they could theoretically touch each other. This can be prevented by
% making the widths slightly smaller. And when there is only one title
% in the header, you can make the width equal to or slightly smaller
-% than \cs{headwidth}.
+% than \cs{headwidth}. A more sophisticated solution would be to check
+% if one of the header parts is small enough and then truncate the other
+% one for the remaining space.
%
% \section{I lost my chapter/section titles}
%
@@ -3546,10 +3596,11 @@
% This is similar to \LaTeX's \cs{@tfor}, but it expands the \texttt{charstring}.
% \begin{macrocode}
% \changes{fancyhdr v3.10}{2019/01/25}{Use \cs{newcommand} instead of \cs{def}.}
+% \changes{fancyhdr v4.0.2}{2022/05/10}{Make \cs{f@nch@rc} \cs{long}.}
\newcommand{\f@nch@forc}[3]{\expandafter\f@nchf@rc\expandafter#1\expandafter{#2}{#3}}
\newcommand{\f@nchf@rc}[3]{\def\temp@ty{#2}\ifx\@empty\temp@ty\else
\f@nch@rc#1#2\f@nch@rc{#3}\fi}
-\def\f@nch@rc#1#2#3\f@nch@rc#4{\def#1{#2}#4\f@nchf@rc#1{#3}{#4}}
+\long\def\f@nch@rc#1#2#3\f@nch@rc#4{\def#1{#2}#4\f@nchf@rc#1{#3}{#4}}
% \end{macrocode}
% \end{macro}
% \begin{macro}{\f@nch@for}
@@ -3629,6 +3680,7 @@
% \end{macro}
%
% \begin{macro}{\f@nch@fancyhf}
+% \changes{fancyhdr v4.0.2}{2022/05/10}{Make \cs{f@nch@fancyhf} \cs{long}.}
% This macro interprets the parameters for the headers and footers.\\
% Parameters:\\
% (1) The user command that was used (like \cs{fancyhead}). This is used
@@ -3642,7 +3694,7 @@
% \texttt{[eo]}, \meta{y} from \texttt{[lcr]} and \meta{z} from \texttt{[hf]}.
%
% \begin{macrocode}
-\def\f@nch@fancyhf#1#2[#3]#4{%
+\long\def\f@nch@fancyhf#1#2[#3]#4{%
\def\temp@c{}%
\f@nch@forc\tmpf@ra{#3}%
{\expandafter\f@nch@ifin\tmpf@ra{eolcrhf,EOLCRHF}%
@@ -3880,7 +3932,8 @@
% \cs{hsize} to \cs{headwidth} (this helps for multicol); reset
% \bsbs, \cs{raggedleft}, \cs{raggedright} and \cs{centering} to
% their default values (for tabu), and \cs{everypar} to empty.\\
-% The font is reset to \cs{normalfont}.
+% The font is reset to \cs{normalfont}. Actually this is done in the
+% \LaTeX{} output routine, so we don't have to do it here.
% \begin{macrocode}
\def\f@nch@reset{\f@nch@everypar{}\restorecr\endlinechar=13
\let\\\@normalcr \let\raggedleft\f@nch@raggedleft
@@ -3906,7 +3959,8 @@
}
\def\f@nch@center#1[#2]#3#4#5{%
% \end{macrocode}
-% At first, we execute the case when the \meta{center-mark} is empty:
+% At first, we execute the case when the \meta{center-mark} is empty\footnote{%
+% This code is reused from the \Package{nccfancyhdr} by Alexander I. Rozhenko}:
% \begin{macrocode}
\def\@tempa{#4}\ifx\@tempa\@empty
\hbox to\linewidth{\color@begingroup{#3}\hfil {#5}\color@endgroup}%
@@ -4032,12 +4086,22 @@
\newcommand\f@nch@vbox[2]{%
\setbox0\vbox{#2}%
\ifdim\ht0>#1\relax
+% \end{macrocode}
+% This is the part where the the header/footer is too tall for the vertical space.
+% If the \texttt{[nocheck]} package option is not given, we give a
+% warning message.
+% \begin{macrocode}
\iff@nch@check
\dimen0=#1\advance\dimen0-\ht0
\f@nch@warning{%
\string#1 is too small (\the#1): \MessageBreak
Make it at least \the\ht0, for example:\MessageBreak
\string\setlength{\string#1}{\the\ht0}%
+% \end{macrocode}
+% If the \texttt{[compatV3} option was given (and not
+% \texttt{[nocheck]}), we will also change the
+% \cs{headheight}/\cs{footskip} globally below, and announce this in the warning message.
+% \begin{macrocode}
\iff@nch@compatViii .\MessageBreak
We now make it that large for the rest of the document.\MessageBreak
This may cause the page layout to be inconsistent, however
@@ -4065,6 +4129,11 @@
% \changes{fancyhdr v4.0}{2019/03/22}{Parameter \cs{headruleskip}.}
% \changes{fancyhdr v4.0}{2019/03/25}{\cs{fancyheadinit} initialisation
% code added and \cs{f@nch@reset} moved up.}
+% \changes{fancyhdr v4.0.2}{2022/05/09}{Added
+% \cs{leavevmode}\cs{ignorespaces} to each header/footer field.
+% The \cs{leavevmode} prevents a bug when a field starts with a
+% \cs{color} command. The \cs{ignorespaces} skips initial spaces in
+% the parameter, as is usual in a \cs{parbox}, for backwards compatibility.}
% Put together a header or footer given the left, center and right
% text, fillers at left and right and a rule. The \cs{xlap} commands put
% the text into an hbox of zero size, so overlapping text does not
@@ -4091,11 +4160,11 @@
\hbox to\headwidth{%
\f@nch@vbox\headheight{%
\hbox{%
- \rlap{\parbox[b]{\headwidth}{\raggedright#2}}%
+ \rlap{\parbox[b]{\headwidth}{\raggedright\leavevmode\ignorespaces#2}}%
\hfill
- \parbox[b]{\headwidth}{\centering#3}%
+ \parbox[b]{\headwidth}{\centering\leavevmode\ignorespaces#3}%
\hfill
- \llap{\parbox[b]{\headwidth}{\raggedleft#4}}%
+ \llap{\parbox[b]{\headwidth}{\raggedleft\leavevmode\ignorespaces#4}}%
}%
\vskip\headruleskip\relax
\headrule
@@ -4114,6 +4183,11 @@
% definition.}
% \changes{fancyhdr v4.0}{2019/03/25}{\cs{fancyfootinit} initialisation
% code added and \cs{f@nch@reset} moved up.}
+% \changes{fancyhdr v4.0.2}{2022/05/09}{Added
+% \cs{leavevmode}\cs{ignorespaces} to each header/footer field.
+% The \cs{leavevmode} prevents a bug when a field starts with a
+% \cs{color} command. The \cs{ignorespaces} skips initial spaces in
+% the parameter, as is usual in a \cs{parbox}, for backwards compatibility.}
% We put the \cs{footrule} in a \cs{vbox} to accommodate for flexible
% footrules (e.g. using \cs{hrulefill}), so that the \cs{headwidth} will
% be used as the line width. But to preserve the vertical spacing we
@@ -4129,11 +4203,11 @@
\setbox0=\vbox{\footrule}\unvbox0
\vskip\footruleskip
\hbox{%
- \rlap{\parbox[t]{\headwidth}{\raggedright#2}}%
+ \rlap{\parbox[t]{\headwidth}{\raggedright\leavevmode\ignorespaces#2}}%
\hfill
- \parbox[t]{\headwidth}{\centering#3}%
+ \parbox[t]{\headwidth}{\centering\leavevmode\ignorespaces#3}%
\hfill
- \llap{\parbox[t]{\headwidth}{\raggedleft#4}}%
+ \llap{\parbox[t]{\headwidth}{\raggedleft\leavevmode\ignorespaces#4}}%
}%
}%
}%
@@ -4163,7 +4237,7 @@
% \changes{fancyhdr v4.0}{2019/03/21}{Put all the initialisation code in
% \cs{f@nch@initialise}}
% This macro initialises the headers and footers and \cs{chaptermark}
-% and/or \cs{[sub]sectionmark} for pagestyle \texttt{fancy}
+% and/or \Cmd{[sub]sectionmark} for pagestyle \texttt{fancy}
% \begin{macrocode}
\def\f@nch@initialise{%
% \end{macrocode}
@@ -4466,7 +4540,7 @@
% \end{macro}
% \begin{macro}{\f@nch@pagestyle}
% The actual code for \cs{fancypagestyle}. Build the page style body.
-% Declare it as a fancyhdr page style.
+% Declare it as a fancyhdr-based page style.
% \changes{fancyhdr v4.0}{2019/09/05}{Make the definition of \cs{f@nch@pagestyle} \cs{long}.}
% \begin{macrocode}
\long\def\f@nch@pagestyle#1[#2]#3{%
diff --git a/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty b/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty
index ed6e5e78416..9c9a59eca8b 100644
--- a/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty
+++ b/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty
@@ -21,9 +21,9 @@
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{extramarks}
- [2021/01/28 v4.0.1
+ [2022/05/10 v4.0.2
Extra marks for LaTeX]
-% Copyright (C) 1994-2021 by Pieter van Oostrum <pieter@vanoostrum.org>
+% Copyright (C) 1994-2022 by Pieter van Oostrum <pieter@vanoostrum.org>
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newtoks\@temptokenb
\providecommand\unrestored@protected@xdef{%
diff --git a/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty b/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
index 01f87f2edda..39a70767af9 100644
--- a/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
+++ b/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
@@ -21,9 +21,9 @@
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{fancyhdr}%
- [2021/01/28 v4.0.1
+ [2022/05/10 v4.0.2
Extensive control of page headers and footers]%
-% Copyright (C) 1994-2021 by Pieter van Oostrum <pieter@vanoostrum.org>
+% Copyright (C) 1994-2022 by Pieter van Oostrum <pieter@vanoostrum.org>
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newcommand\if@nch@mpty[1]{\def\temp@a{#1}\ifx\temp@a\@empty}
\newif\iff@nch@check
@@ -131,7 +131,7 @@
\newcommand{\f@nch@forc}[3]{\expandafter\f@nchf@rc\expandafter#1\expandafter{#2}{#3}}
\newcommand{\f@nchf@rc}[3]{\def\temp@ty{#2}\ifx\@empty\temp@ty\else
\f@nch@rc#1#2\f@nch@rc{#3}\fi}
-\def\f@nch@rc#1#2#3\f@nch@rc#4{\def#1{#2}#4\f@nchf@rc#1{#3}{#4}}
+\long\def\f@nch@rc#1#2#3\f@nch@rc#4{\def#1{#2}#4\f@nchf@rc#1{#3}{#4}}
\newcommand{\f@nch@for}[3]{\edef\@fortmp{#2}%
\expandafter\@forloop#2,\@nil,\@nil\@@#1{#3}}
\newcommand\f@nch@default[3]{%
@@ -148,7 +148,7 @@
\newcommand{\fancyheadoffset}[2][]{\f@nch@fancyhfoffs\fancyheadoffset h[#1]{#2}}%
\newcommand{\fancyfootoffset}[2][]{\f@nch@fancyhfoffs\fancyfootoffset f[#1]{#2}}%
\newcommand{\fancyhfoffset}[2][]{\f@nch@fancyhfoffs\fancyhfoffset {}[#1]{#2}}%
-\def\f@nch@fancyhf#1#2[#3]#4{%
+\long\def\f@nch@fancyhf#1#2[#3]#4{%
\def\temp@c{}%
\f@nch@forc\tmpf@ra{#3}%
{\expandafter\f@nch@ifin\tmpf@ra{eolcrhf,EOLCRHF}%
@@ -310,11 +310,11 @@
\hbox to\headwidth{%
\f@nch@vbox\headheight{%
\hbox{%
- \rlap{\parbox[b]{\headwidth}{\raggedright#2}}%
+ \rlap{\parbox[b]{\headwidth}{\raggedright\leavevmode\ignorespaces#2}}%
\hfill
- \parbox[b]{\headwidth}{\centering#3}%
+ \parbox[b]{\headwidth}{\centering\leavevmode\ignorespaces#3}%
\hfill
- \llap{\parbox[b]{\headwidth}{\raggedleft#4}}%
+ \llap{\parbox[b]{\headwidth}{\raggedleft\leavevmode\ignorespaces#4}}%
}%
\vskip\headruleskip\relax
\headrule
@@ -331,11 +331,11 @@
\setbox0=\vbox{\footrule}\unvbox0
\vskip\footruleskip
\hbox{%
- \rlap{\parbox[t]{\headwidth}{\raggedright#2}}%
+ \rlap{\parbox[t]{\headwidth}{\raggedright\leavevmode\ignorespaces#2}}%
\hfill
- \parbox[t]{\headwidth}{\centering#3}%
+ \parbox[t]{\headwidth}{\centering\leavevmode\ignorespaces#3}%
\hfill
- \llap{\parbox[t]{\headwidth}{\raggedleft#4}}%
+ \llap{\parbox[t]{\headwidth}{\raggedleft\leavevmode\ignorespaces#4}}%
}%
}%
}%
diff --git a/Master/texmf-dist/tex/latex/fancyhdr/fancyheadings.sty b/Master/texmf-dist/tex/latex/fancyhdr/fancyheadings.sty
index 76f4feff4ef..11248ad9821 100644
--- a/Master/texmf-dist/tex/latex/fancyhdr/fancyheadings.sty
+++ b/Master/texmf-dist/tex/latex/fancyhdr/fancyheadings.sty
@@ -21,7 +21,7 @@
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{fancyheadings}
- [2021/01/28 v4.0.1
+ [2022/05/10 v4.0.2
Legacy package to call fancyhdr]
% Public domain
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 15:16:16 +0000