summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r--Master/texmf-dist/source/latex/exframe/exframe.dtx1184
1 files changed, 908 insertions, 276 deletions
diff --git a/Master/texmf-dist/source/latex/exframe/exframe.dtx b/Master/texmf-dist/source/latex/exframe/exframe.dtx
index 684fbc35e64..dd8e26e3932 100644
--- a/Master/texmf-dist/source/latex/exframe/exframe.dtx
+++ b/Master/texmf-dist/source/latex/exframe/exframe.dtx
@@ -20,11 +20,11 @@
% exfserpe.tex, exfserpf.tex, exfsermk.sh, exfsermk.mak.
%
%<package|samplesingle|samplemultimain>\NeedsTeXFormat{LaTeX2e}[1996/12/01]
-%<package>\ProvidesPackage{exframe}[2019/05/01 v3.2 Framework for Exercise Problems]
-%<samplesingle>\ProvidesFile{exfsamp.tex}[2019/05/01 v3.2 standalone sample for exframe]
-%<samplemultimain>\ProvidesFile{exfserm.tex}[2019/05/01 v3.2 multipart sample for exframe]
+%<package>\ProvidesPackage{exframe}[2019/06/15 v3.3 Framework for Exercise Problems]
+%<samplesingle>\ProvidesFile{exfsamp.tex}[2019/06/15 v3.3 standalone sample for exframe]
+%<samplemultimain>\ProvidesFile{exfserm.tex}[2019/06/15 v3.3 multipart sample for exframe]
%<*driver>
-\def\thedate#1{2019/05/01}\def\theversion#1{v3.2}
+\def\thedate#1{2019/06/15}\def\theversion#1{v3.3}
\ProvidesFile{exframe.dtx}[\thedate{} \theversion{} exframe reference manual file]
\PassOptionsToClass{10pt,a4paper}{article}
\documentclass{ltxdoc}
@@ -218,7 +218,7 @@ a subproblem, part or an individual question of an exercise problem:
\end{tabular}
\end{center}
%
-A |subproblem| block must be contained within a |problem| block
+A |subproblem| environment must be contained within a |problem| environment
(however, a |problem| block need not contain |subproblem| blocks).
\DescribeEnv{solution}
@@ -232,13 +232,14 @@ the solution to a problem or a subproblem:
\end{tabular}
\end{center}
%
-A |solution| block should be at the end of a |subproblem| or |problem| block
+A |solution| environment should be
+at the end of a |subproblem| or |problem| environment
(it is not mandatory to provide a |solution|).
-It can be contained within the corresponding block or it can follow it.
+It can be contained within the corresponding environment or it can follow it.
Depending on the choice of solution display, see \secref{sec:solutions},
the output may have a slightly different layout.
In terms of logic, it is preferred
-to define a solution \emph{within} the corresponding block;
+to define a solution \emph{within} the corresponding environment;
this may also have some technical advantages and produce
a slightly better result in terms of layout.
@@ -259,10 +260,11 @@ There may or may not be additional auxiliary text introducing the problems.
A header will be added to the sheet according to the specified layout.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\subsection{Solution Display}
+\subsection{Solution and Problem Display}
\label{sec:solutions}
-There are several options to control the output of solutions.
+There are several options to control the output of solutions
+and of problems.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\DescribeMacro{solutions}
@@ -327,15 +329,11 @@ or display them at a manually chosen location (|manual|).
Note that typically solutions are defined at the end of a (sub)problem
and therefore the choice |here| is similar to (|sub|)|problem|.
The latter form, however, makes sure that a solution
-does not inherit the margin of the parent block.
-The alternate mode |here*| does not intermediately store
-the solution block content in a token buffer;
-this might resolve some tokenisation issues
-in special circumstances.
+does not inherit the margin of the parent environment.
The alternate modes |problem*| and |subproblem*|
-positions the solution \emph{after} the (sub)problem block
+positions the solution \emph{after} the (sub)problem environment
such that it does not inherit any layout,
-but also no definitions made in the parent block.
+but also no definitions made in the parent environment.
In |manual| mode, all solutions are collected (with appropriate headers)
until they are output by the directive |\insertsolutions|.
If no solutions are stored in the buffer
@@ -352,7 +350,8 @@ Writing to a file is initiated by:
\end{center}
%
The optional argument describes the filename as \textit{filename}|.sol|;
-no argument defaults to the main tex filename as |\jobname.sol|.
+no argument defaults to the main tex filename as |\jobname.sol|;
+the extension |.sol| can be customised by the configuration |extsolutions|.
This mode overrides the |solutionbelow| behaviour described above;
all subsequent solutions are written to the file.
The file is closed by |\closesolutions| and the display of solutions
@@ -372,6 +371,94 @@ Solutions are read from a file by:
This command outputs a sectional title
and reads the file via |\input{|\textit{filename}|.sol}|.
+\medskip
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\DescribeMacro{solutionbuf}
+\DescribeMacro{problembuf}
+The package offers similar functionality to control the display of problems.
+In order to have any control over the content of |problem| environments,
+the latter needs to be read into an internal buffer.
+Reading of solutions and problems to internal buffers is activated
+or deactivated by:
+%
+\begin{center}
+\begin{tabular}{l}
+|\exercisesetup{solutionbuf|[|=true|\textbar|false|]|}|\\
+|\exercisesetup{problembuf|[|=true|\textbar|false|]|}|
+\end{tabular}
+\end{center}
+%
+By default, |solution| environments are read to an internal buffer,
+while the content of |problem| environments is processed directly
+by the \TeX\ engine.
+Therefore, the following options to control the display
+of |problem| environments require the statement |\exercisesetup{problembuf}|.
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\DescribeMacro{problemmanual}
+\DescribeMacro{\insertproblems}
+The immediate display of |problem| environments is controlled by:
+%
+\begin{center}
+|\exercisestyle{problemmanual|[|=true|\textbar|false|]|}|
+\end{center}
+%
+In the default automatic mode, problems are displayed directly
+where they are declared.
+In manual mode, problems are collected to an internal buffer,
+and only displayed by issuing |\insertproblems|.
+
+Note that |solution| environments should be
+declared within the corresponding |problem| environment in order to
+preserve their appropriate association.
+The |solution| environment is then processed at the place
+where the |problem| environment is displayed,
+and it may (or may not) be deferred further.
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\DescribeMacro{\writeproblems}
+\DescribeMacro{\readproblems}
+Problems can be written out to an external file for later usage.
+The functionality is analogous to solutions
+and uses the macros:
+%
+\begin{center}
+\begin{tabular}{l}
+|\writeproblems[|\textit{filename}|]|\\
+|\readproblems[|\textit{filename}|]|
+\end{tabular}
+\end{center}
+%
+The optional argument describes the filename as \textit{filename}|.prb|;
+no argument defaults to the main tex filename as |\jobname.prb|;
+the extension |.prb| can be customised by the configuration |extproblems|.
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\DescribeMacro{disable}
+\DescribeMacro{insertproblemselect}
+The display of a particular |problem|
+can be suppressed altogether by an optional argument:
+%
+\begin{center}
+|\begin{problem}[disable]|
+\end{center}
+%
+
+This option can be exploited to automatically
+suppress certain classes of problems as follows:
+A hook function |insertproblemselect| declared by:
+%
+\begin{center}
+|\exerciseconfig{insertproblemselect}[1]{|\textit{code}|}|
+\end{center}
+%
+can call
+|\setproblemdata{disable}| whenever a problem is to be suppressed.
+In order to decide, the optional argument of the |problem| environment
+is passed on to the hook function as the single argument.
+Note that the argument needs to be processed manually.
+
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{Metadata}
\label{sec:metadata}
@@ -477,8 +564,10 @@ The package offers a similar mechanism to describe and use metadata
for sheets and problems:
%
\begin{center}
-|\begin{sheet}[|\textit{opts}|]|
+\begin{tabular}{l}
+|\begin{sheet}[|\textit{opts}|]|\\
|\begin{problem}[|\textit{opts}|]|
+\end{tabular}
\end{center}
%
The argument \textit{opt}
@@ -523,22 +612,26 @@ contains the raw title as specified by |title|.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\DescribeMacro{\defsheetdata}
+\DescribeMacro{\setsheetdata}
\DescribeMacro{\getsheetdata}
\DescribeMacro{\sheetdataempty}
\DescribeMacro{\defproblemdata}
+\DescribeMacro{\setproblemdata}
\DescribeMacro{\getproblemdata}
\DescribeMacro{\problemdataempty}
Metadata for sheets can be used in the same way as the global metadata.
-The following directives are analogous to |\defexecisesdata|,
-|\getproblemdata| and |\problemdataempty|:
+The following directives are analogous to |\defexercisedata|,
+|\exercisedata|, |\getexercisedata| and |\exercisedataempty|:
%
\begin{center}
\begin{tabular}{l}
|\defsheetdata{|\textit{key}|}|\\
+|\setsheetdata{|\textit{data}|}|\\
|\getsheetdata{|\textit{key}|}|\\
|\sheetdataempty{|\textit{key}|}|%
|{|\textit{empty code}|}{|\textit{filled code}|}|\\[1ex]
|\defproblemdata{|\textit{key}|}|\\
+|\setproblemdata{|\textit{data}|}|\\
|\getproblemdata{|\textit{key}|}|\\
|\problemdataempty{|\textit{key}|}|%
|{|\textit{empty code}|}{|\textit{filled code}|}|
@@ -631,12 +724,15 @@ keyword(s) for the problem;
\item |comment|:
some comment on the problem.
\item |optional|
-(enabled by default):
+(display enabled by default):
whether addressing the problem is mandatory or optional;
by default the text will be displayed after the title
in italic shape.
\end{itemize}
%
+By default, only the |optional| items are displayed,
+all other types of items are hidden;
+controlling the display for each type of item is described below.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\DescribeMacro{extdata}
@@ -740,16 +836,19 @@ By default, such points will be printed as
[\textit{regular}][|+|\textit{bonus}] where 0 components are omitted.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\DescribeMacro{pointsat}
-\DescribeMacro{subpointsat}
+\DescribeMacro{problempointsat}
+\DescribeMacro{subproblempointsat}
+\DescribeMacro{solutionpointsat}
The location where points of problems and subproblems
shall be displayed can be adjusted individually by:
%
\begin{center}
\begin{tabular}{l}
-|\problemstyle{points=start|\textbar|start*|\textbar|margin|%
+|\exercisestyle{problempointsat=start|\textbar|start*|\textbar|margin|%
+ \textbar|end|\textbar|manual|\textbar|off}|\\
+|\exercisestyle{subproblempointsat=start|\textbar|start*|\textbar|margin|%
\textbar|end|\textbar|manual|\textbar|off}|\\
-|\problemstyle{subpoints=start|\textbar|start*|\textbar|margin|%
+|\exercisestyle{solutionpointsat=start|\textbar|start*|\textbar|margin|%
\textbar|end|\textbar|manual|\textbar|off}|
\end{tabular}
\end{center}
@@ -785,24 +884,46 @@ the points can be accessed by:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\DescribeMacro{\getsheetpoints}
\DescribeMacro{\getproblempoints}
+\DescribeMacro{\getsubproblempoints}
+\DescribeMacro{\getsolutionpoints}
\DescribeMacro{\extractpoints}
+\DescribeMacro{\switchpoints}
The package allows to read the point totals
for other sheets and problems:
%
\begin{center}
\begin{tabular}{l}
|\getsheetpoints{|\textit{tag}|}|\\
-|\getproblempoints{|\textit{tag}|}|
+|\getproblempoints{|\textit{tag}|}|\\
+|\getsubproblempoints{}|\\
+|\getsolutionpoints{}|
\end{tabular}
\end{center}
%
Here \textit{tag} is the tag assigned to the corresponding sheet or problem,
see \secref{sec:labels}.
+An empty argument \textit{tag} refers to the current
+sheet, (sub)problem or solution.
If bonus points are used, the points will be returned
in the format [\textit{regular}][|+|\textit{bonus}];
the components \textit{regular} and \textit{bonus}
can be extracted from the returned expression
by |\extractpoints| and |\extractpoints*|, respectively.
+A convenient case switch of the returned value can be performed by:
+%
+\begin{center}
+|\switchpoints{|\textit{reg}|}{|\textit{bonus}|}{|\textit{both}|}{|%
+\textit{none}|}{|\textit{val}|}|
+\end{center}
+%
+Here \textit{val} is the value returned from the points register,
+\textit{reg} is displayed for purely regular points,
+\textit{bonus} is displayed for purely bonus points,
+\textit{both} is displayed for mixed points,
+\textit{none} is displayed for no points.
+In each of the four expressions,
+|#1| will be replaced by the regular points
+and |#2| by the bonus points.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\DescribeMacro{\awardpoints}
@@ -1103,24 +1224,30 @@ The package defines a couple of standard styles:
%
\begin{itemize}
\item |solutionbelow=|\textit{pos}
-(can take values |here|, |here*|, |subproblem|, |subproblem*|,
+(can take values |here|, |subproblem|, |subproblem*|,
|problem|, |problem*|, |sheet| and |manual|;
initially set to |subproblem|) --
-positions the solutions below the indicated blocks;
+positions the solutions below the indicated environments;
see \secref{sec:solutions} for details.
-\item |pointsat=|\textit{pos}
+\item |problempointsat=|\textit{pos}
(can take values |start|, |start*|, |margin|, |end| and |manual|;
initially set to |start|) --
displays points in problems at the indicated location;
see \secref{sec:points} for details.
-\item |subpointsat=|\textit{pos}
+\item |subproblempointsat=|\textit{pos}
(can take values |start|, |start*|, |margin|, |end| and |manual|;
initially set to |end|) --
displays points in subproblems at the indicated location;
see \secref{sec:points} for details.
+\item |solutionpointsat=|\textit{pos}
+(can take values |start|, |start*|, |margin|, |end| and |manual|;
+initially set to |end|) --
+displays points in solutions at the indicated location;
+see \secref{sec:points} for details.
+
\item |problemby={|\textit{counter}|}| --
number problems with the prefix \textit{counter},
i.e.\ reset the problem counter whenever \textit{counter} increases
@@ -1340,6 +1467,21 @@ enable/disable automatically assigning labels
(|prob:\problemtag|; can be adjusted)
to problems according to their tag |\problemtag|.
+\item |solutionbuf|[|=true|\textbar|false|]
+(no value implies |true|, initially set to |true|) --
+enable/disable buffering for |solution| environments
+in order to control their display;
+disabling buffering can be helpful
+in debugging faulty |solution| environments;
+it might also resolve some tokenisation issues in special circumstances;
+note that the display of solutions cannot be suppressed
+with |\exercisesetup{solutions=false}| when buffering if disabled.
+
+\item |problembuf|[|=true|\textbar|false|]
+(no value implies |true|, initially set to |false|) --
+enable/disable buffering for |problem| environments
+in order to control their display.
+
\end{itemize}
%
@@ -1533,12 +1675,16 @@ versions of this package:
%
\begin{itemize}
\item
+Add a section on useful combinations of customisation settings
+to achieve specific goals. Please send suggestions.
+\item
Option to hide problem text while maintaining access to embedded solutions
-(for a version containing only solutions)
-or to postpone problems (for collecting them in an exercises section):
-this is difficult to implement because the problem block
-cannot simply be discarded, but must be scanned very carefully
-for the embedded solution.
+(for a version containing only solutions):
+this is difficult to implement because the problem environment
+cannot simply be discarded, but would have to be scanned very carefully
+for the embedded solution;
+instead process problems to some document and save solutions to file,
+then read solutions from different document.
\item
Define structures for multiple-choice questions.
\end{itemize}
@@ -1547,6 +1693,37 @@ Define structures for multiple-choice questions.
\subsection{Revision History}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\paragraph{v3.3:} 2019/06/15
+
+\begin{itemize}
+\item
+control display of |problem| environments via
+package option |problembuf|:
+manual display, write to file, disable individual problems
+\item
+|solutionbelow| mode |here*| superseded by
+package option |solutionbuf|
+\item
+display total points within solution: |solutionpointsat|
+(thanks to Till Bargheer for suggestion)
+\item
+read points for current sheet, (sub)problem and solution
+(thanks to Johannes Hahn for suggestion)
+\item
+case switch for bonus points
+(thanks to Johannes Hahn for suggestion)
+\item
+option to |disable| particular problems,
+control by hook function
+(thanks to Manuel Benz for suggestion)
+\item
+provided interface |\showfracpoints| and |\exerciseconfig{frac}|
+for fractional points display
+\item
+filename extensions configurable
+\end{itemize}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v3.2:} 2019/05/01
\begin{itemize}
@@ -1555,7 +1732,7 @@ bonus points can be specified as
|points=|[\textit{regular}][|+|\textit{bonus}]
\item
|solutionbelow| mode |here*| added
-for direct processing of the solution block
+for direct processing of the solution environment
\item
multipart sample added
\end{itemize}
@@ -1569,10 +1746,11 @@ fix interaction with
package \href{http://ctan.org/pkg/calc}{\textsf{calc}}
(thanks to Johannes Hahn for bug report)
\item
-fix style |fracpoints| in combination with some [|sub|]|pointsat| choices
+fix style |fracpoints| in combination
+with some [|sub|]|problempointsat| choices
(thanks to Johannes Hahn for bug report)
\item
-fix spacing for [|sub|]|pointsat=margin|
+fix spacing for [|sub|]|problempointsat=margin|
(thanks to Johannes Hahn for bug report)
\end{itemize}
@@ -1750,6 +1928,16 @@ dedicated layout and macros for author's exercise sheets
\exerciseconfig{countersubproblemmax}{vii)}
% \end{macrocode}
+% Automatically display an asterisk for all
+% subproblems with bonus points only;
+% remove space to separate items:
+% \begin{macrocode}
+\exerciseconfig{insertsubprobleminfo}{%
+ \switchpoints{}{\addprobleminfo*{%
+ \hspace{-\getexerciseconfig{skipsubprobleminfo}}*}}%
+ {}{}{\getsubproblempoints{}}}
+% \end{macrocode}
+
% Redefine the terms to be used for sheet(s);
% here, a German version:
% \begin{macrocode}
@@ -1761,7 +1949,7 @@ dedicated layout and macros for author's exercise sheets
% change margin display to use the left margin;
% use the abbreviated form `$n$p.':
% \begin{macrocode}
-\exercisestyle{pointsat=margin}
+\exercisestyle{problempointsat=margin}
\reversemarginpar
\exerciseconfig{composepointsmargin}[1]{#1p.}
\exerciseconfig{composepointspairmargin}[2]{
@@ -1854,7 +2042,7 @@ Compute the sum
\end{equation}
% \end{macrocode}
-% Provide a solution for the subproblem (within the subproblem block):
+% Provide a solution for the subproblem (within the subproblem environment):
% \begin{macrocode}
\begin{solution}
The result is
@@ -2220,7 +2408,7 @@ This is beyond the scope of this example.
% Number figures within sheet to provide a stable numbering
% upon insertion/deletion of new figures or partial compilation.
% Do not warn about unused figures when preparing without solutions
-% (figures for solutions should be declared outside |solution| blocks):
+% (figures for solutions should be declared outside |solution| environments):
% \begin{macrocode}
\mpostsetup{checksum}
\if\draftver y\mpostsetup{now,nowall}\fi
@@ -2620,7 +2808,7 @@ label(btex \figure etex, center(paths[1]));
% Problem body without a figure;
% this time the |solution| environments are
-% included in the |subproblem| blocks:
+% included in the |subproblem| environments:
% \begin{macrocode}
\lorem
@@ -2674,7 +2862,7 @@ label(btex \figure etex, center(paths[1]));
% allows to compile each problem individually.
%
% To that end, prepare a file |exfserp|\textit{nn}|.tex|
-% containing the problem block |\begin{problem}| \ldots |\end{problem}|.
+% containing the |problem| environment.
% This file should start with:
% \begin{macrocode}
%%\providecommand{\printsol}{n}
@@ -2995,7 +3183,7 @@ clean-all: clean
% The package loads the package
% \textsf{verbatim} and \textsf{xkeyval}
% if not yet present.
-% \textsf{verbatim} is used for solution block reading
+% \textsf{verbatim} is used for solution environment reading
% and \textsf{xkeyval} is used for extended options processing:
% \begin{macrocode}
\RequirePackage{verbatim}
@@ -3061,7 +3249,6 @@ clean-all: clean
{\def\exf@tmp{#2}\ifx#1\exf@tmp#3\fi}
% \end{macrocode}
-
% \macro{\exf@href}
% Display text with hyperreference passed by macro |#1|
% (in case \textsf{hyperref} is loaded
@@ -3167,6 +3354,15 @@ clean-all: clean
% \begin{macrocode}
\define@boolkey{exf@setup}[exf@]{warntext}[true]{}
% \end{macrocode}
+% Activate buffering of solutions:
+% \begin{macrocode}
+\define@boolkey{exf@setup}[exf@]{solutionbuf}[true]{}
+\exf@solutionbuftrue
+% \end{macrocode}
+% Activate buffering of problems:
+% \begin{macrocode}
+\define@boolkey{exf@setup}[exf@]{problembuf}[true]{}
+% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Processing.}
@@ -3298,6 +3494,10 @@ clean-all: clean
% \begin{macrocode}
\exerciseconfig{styletitlesolutions}{\normalsize}
% \end{macrocode}
+% Style for problem block title:
+% \begin{macrocode}
+\exerciseconfig{styletitleproblems}{\Large}
+% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Spacing.}
@@ -3364,21 +3564,38 @@ clean-all: clean
\exerciseconfig{skipsolutionitemsub}{0pt}
% \end{macrocode}
-% Spaces related to blocks of solutions;
+% Spaces related to solution blocks;
% space above and below a solution block:
% \begin{macrocode}
\exerciseconfig{skipsolutionsabove}{1.5ex plus 0.5ex minus 1ex}
\exerciseconfig{skipsolutionsbelow}{1.5ex plus 0.5ex minus 1ex}
% \end{macrocode}
-% Space following problem titles in a solution block:
+% Space above problem titles in a solution block:
% \begin{macrocode}
-\exerciseconfig{skipsolutionsproblem}{1.0ex plus 0ex minus 0.5ex}
+\exerciseconfig{skipsolutionsproblemabove}{1.0ex plus 0ex minus 0.5ex}
+% \end{macrocode}
+% Space following problem titles in a solution block
+% (with legacy definition):
+% \begin{macrocode}
+\exerciseconfig{skipsolutionsproblemtitle}{1.0ex plus 0ex minus 0.5ex}
+\exerciseconfig{skipsolutionsproblem}{\exf@config@skipsolutionsproblemtitle}
% \end{macrocode}
% Space following title of a solution block:
% \begin{macrocode}
\exerciseconfig{skipsolutionstitle}{1.0ex plus 0ex minus 0.5ex}
% \end{macrocode}
+% Spaces related to problem blocks;
+% space above and below a problem block:
+% \begin{macrocode}
+\exerciseconfig{skipproblemsabove}{1.5ex plus 0.5ex minus 1ex}
+\exerciseconfig{skipproblemsbelow}{1.5ex plus 0.5ex minus 1ex}
+% \end{macrocode}
+% Space following title of a problem block:
+% \begin{macrocode}
+\exerciseconfig{skipproblemstitle}{1.0ex plus 0ex minus 0.5ex}
+% \end{macrocode}
+
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Hook Code.}
%
@@ -3410,6 +3627,14 @@ clean-all: clean
% \begin{macrocode}
\exerciseconfig{insertsolutionsafter}{}
% \end{macrocode}
+% Code to insert before a problem block is displayed:
+% \begin{macrocode}
+\exerciseconfig{insertproblemsbefore}{}
+% \end{macrocode}
+% Code to insert after a problem block is displayed:
+% \begin{macrocode}
+\exerciseconfig{insertproblemsafter}{}
+% \end{macrocode}
% Code to insert before a problem is displayed:
% \begin{macrocode}
\exerciseconfig{insertproblembefore}{}
@@ -3428,6 +3653,10 @@ clean-all: clean
% \begin{macrocode}
\exerciseconfig{insertprobleminfo}{}
% \end{macrocode}
+% Code to determine the display of problems:
+% \begin{macrocode}
+\exerciseconfig{insertproblemselect}[1]{}
+% \end{macrocode}
% Analogous definitions for subproblems:
% \begin{macrocode}
\exerciseconfig{insertsubproblembefore}{}
@@ -3546,18 +3775,28 @@ clean-all: clean
\exerciseconfig{composetitlesolutions}%
{\getexerciseconfig{termsolutions}}
% \end{macrocode}
+% Compose title for problem block:
+% \begin{macrocode}
+\exerciseconfig{composetitleproblems}%
+ {\getexerciseconfig{termproblems}}
+% \end{macrocode}
% Compose table of contents line for solution block:
% \begin{macrocode}
\exerciseconfig{composetocsolutions}%
{\getexerciseconfig{composetitlesolutions}}
% \end{macrocode}
+% Compose table of contents line for problem block:
+% \begin{macrocode}
+\exerciseconfig{composetocproblems}%
+ {\getexerciseconfig{composetitleproblems}}
+% \end{macrocode}
% Compose sectional title for solution following a single problem;
% arguments are problem number and raw title:
% \begin{macrocode}
\exerciseconfig{composetitlesolutionsproblemsingle}[2]%
{\getexerciseconfig{termsolution}}
% \end{macrocode}
-% Compose sectional title for solution of one problem within a block;
+% Compose sectional title for solution of one problem within a solution block;
% arguments are problem number and raw title:
% \begin{macrocode}
\exerciseconfig{composetitlesolutionsproblemmulti}[2]%
@@ -3647,6 +3886,21 @@ clean-all: clean
(\getexerciseconfig{composepointspair}{#1}{#2}*%
\exerciseifnotempty{#3}{; #3})\fi}
% \end{macrocode}
+% Compose pairs of points for designated situations:
+% \begin{macrocode}
+\exerciseconfig{composepointspairbodyproblem}[2]{%
+ \getexerciseconfig{composepointspairbody}{#1}{#2}}
+\exerciseconfig{composepointspairbodysubproblem}[2]{%
+ \getexerciseconfig{composepointspairbody}{#1}{#2}}
+\exerciseconfig{composepointspairbodysolution}[2]{%
+ \getexerciseconfig{composepointspairbody}{#1}{#2}}
+\exerciseconfig{composepointspairstartproblem}[2]{%
+ \getexerciseconfig{composepointspairstart}{#1}{#2}}
+\exerciseconfig{composepointspairstartsubproblem}[2]{%
+ \getexerciseconfig{composepointspairstart}{#1}{#2}}
+\exerciseconfig{composepointspairstartsolution}[2]{%
+ \getexerciseconfig{composepointspairstart}{#1}{#2}}
+% \end{macrocode}
% Display points in the margin:
% \begin{macrocode}
@@ -3682,7 +3936,8 @@ clean-all: clean
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Further Definitions.}
%
-% \macro{label...}
+% \macro{labelsheet}
+% \macro{labelproblem}
% Templates for automatic generation of labels from tags:
% \begin{macrocode}
\exerciseconfig{labelsheet}[1]{sheet:#1}
@@ -3696,10 +3951,19 @@ clean-all: clean
% \begin{macrocode}
\exerciseconfig{toclevelsheet}{}
\exerciseconfig{toclevelproblem}{}
+\exerciseconfig{toclevelproblems}{}
\exerciseconfig{toclevelsolution}{}
\exerciseconfig{toclevelsolutions}{}
% \end{macrocode}
+% \macro{extsolutions}
+% \macro{extproblems}
+% Filename extension for solution and problem blocks:
+% \begin{macrocode}
+\exerciseconfig{extsolutions}{.sol}
+\exerciseconfig{extproblems}{.prb}
+% \end{macrocode}
+
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{Styles}
% \label{sec:imp-styles}
@@ -3741,13 +4005,20 @@ clean-all: clean
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Default Exercise Styles.}
%
+% \macro{problemmanual}
+% Delay display of problems:
+% \begin{macrocode}
+\define@boolkey{exf@style}[exf@]{problemmanual}[true]{}
+\exf@problemmanualfalse
+% \end{macrocode}
+%
% \macro{solutionbelow}
% Choose location for solutions:
% \begin{macrocode}
\def\exf@solutionbelow{subproblem}
\define@choicekey{exf@style}{solutionbelow}%
- {here,here*,subproblem,subproblem*,problem,problem*,sheet,manual}%
- {\ifexf@infile\else\def\exf@solutionbelow{#1}\fi}
+ {here,subproblem,subproblem*,problem,problem*,sheet,manual}%
+ {\ifexf@solfile@open\else\gdef\exf@solutionbelow{#1}\fi}
% \end{macrocode}
%
% \macro{sheetequation}
@@ -3761,16 +4032,26 @@ clean-all: clean
\exf@style@solutionequationtrue
% \end{macrocode}
%
-% \macro{pointsat}
-% \macro{subpointsat}
-% Choose where points of problems and subproblems are displayed:
+% \macro{problempointsat}
+% \macro{subproblempointsat}
+% \macro{solutionpointsat}
+% Choose where points of (sub)problems and solutions are displayed:
% \begin{macrocode}
\def\exf@pointsat{start}
+\define@choicekey{exf@style}{problempointsat}%
+ {start,start*,margin,end,manual,off}{\def\exf@pointsat{#1}}
\define@choicekey{exf@style}{pointsat}%
{start,start*,margin,end,manual,off}{\def\exf@pointsat{#1}}
\def\exf@subpointsat{end}
+\define@choicekey{exf@style}{subproblempointsat}%
+ {start,start*,margin,end,manual,off}{\def\exf@subpointsat{#1}}
\define@choicekey{exf@style}{subpointsat}%
{start,start*,margin,end,manual,off}{\def\exf@subpointsat{#1}}
+\def\exf@solpointsat{off}
+\define@choicekey{exf@style}{solutionpointsat}%
+ {start,start*,margin,end,manual,off}{\def\exf@solpointsat{#1}}
+\define@choicekey{exf@style}{solpointsat}%
+ {start,start*,margin,end,manual,off}{\def\exf@solpointsat{#1}}
% \end{macrocode}
%
% \macro{problemby}
@@ -3800,7 +4081,7 @@ clean-all: clean
% Use vulgar fractions to display binary fractional points:
% \begin{macrocode}
\defexercisestyle{fracpoints}%
- {\exerciseconfig{composepointsnum}[1]{\protect\exf@nicefrac{##1}}}
+ {\exerciseconfig{composepointsnum}[1]{\protect\showfracpoints{##1}}}
% \end{macrocode}
%
% \macro{twoside}
@@ -3843,7 +4124,8 @@ clean-all: clean
% \begin{macrocode}
\defexercisestyle{solutionsep}{%
\exerciseconfig{insertsolutionsbefore}{\hrule\nopagebreak[3]\vspace{0.5ex}}%
- \exerciseconfig{insertsolutionsafter}{\nopagebreak[3]\vspace{1.0ex}\hrule}}
+ \exerciseconfig{insertsolutionsafter}%
+ {\removelastskip\nopagebreak[3]\vspace{1.0ex}\hrule}}
% \end{macrocode}
% \macro{plainheader}
% Declare a simple sheet header with some configurable options;
@@ -3967,8 +4249,13 @@ clean-all: clean
\define@key{exf@sheet}{#1}%
{\exf@csdo\def{exf@data@sheet@#1}{##1}}}
% \end{macrocode}
+% \macro{\setsheetdata}
+% Set sheet metadata:
+% \begin{macrocode}
+\newcommand{\setsheetdata}[1]{\setkeys{exf@sheet}{#1}}
+% \end{macrocode}
% \macro{\getsheetdata}
-% Read global metadata:
+% Read sheet metadata:
% \begin{macrocode}
\newcommand{\getsheetdata}[1]{\csname exf@data@sheet@#1\endcsname}
% \end{macrocode}
@@ -4005,7 +4292,7 @@ clean-all: clean
% \paragraph{Problem Metadata.}
%
% \macro{\defproblemdata}
-% Declare sheet metadata field
+% Declare problem metadata field
% by defining a key \textit{key} in category |exf@problem|
% that stores the chosen value in |\exf@data@problem@|\textit{key}:
% \begin{macrocode}
@@ -4014,8 +4301,13 @@ clean-all: clean
\define@key{exf@problem}{#1}%
{\exf@csdo\def{exf@data@problem@#1}{##1}}}
% \end{macrocode}
+% \macro{\setproblemdata}
+% Set problem metadata:
+% \begin{macrocode}
+\newcommand{\setproblemdata}[1]{\setkeys{exf@problem,exf@scanproblem}{#1}}
+% \end{macrocode}
% \macro{\getproblemdata}
-% Read global metadata:
+% Read problem metadata:
% \begin{macrocode}
\newcommand{\getproblemdata}[1]{\csname exf@data@problem@#1\endcsname}
% \end{macrocode}
@@ -4035,10 +4327,10 @@ clean-all: clean
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Problem Block Code.}
+% \paragraph{Problem Environment Code.}
%
% \macro{\exf@addmargin}
-% Define a length for block margin:
+% Define a length for environment margin:
% \begin{macrocode}
\newlength\exf@addmargin
% \end{macrocode}
@@ -4080,7 +4372,7 @@ clean-all: clean
{\exf@prepend@def\exf@intro{#1\hspace{\exf@intro@skip}}}
% \end{macrocode}
% \macro{\exf@open@block}
-% Open block, set margin, compose opening line:
+% Open environment, set margin, compose opening line:
% \begin{macrocode}
\newcommand{\exf@open@block}[1]{%
\advance\leftskip\exf@addmargin%
@@ -4093,7 +4385,7 @@ clean-all: clean
\fi}%
% \end{macrocode}
% \macro{\exf@close@block}
-% Close block, undo margin:
+% Close environment, undo margin:
% \begin{macrocode}
\newcommand{\exf@close@block}{%
\advance\leftskip-\exf@addmargin%
@@ -4287,21 +4579,23 @@ clean-all: clean
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{File Output.}
%
-% \macro{\ifexf@infile}
-% Conditional whether an output file is presently in use:
+% \macro{\ifexf@solfile@open}
+% Conditional whether output files are presently in use:
% \begin{macrocode}
-\newif\ifexf@infile\exf@infilefalse
+\newif\ifexf@solfile@open\exf@solfile@openfalse
+\newif\ifexf@probfile@open\exf@probfile@openfalse
% \end{macrocode}
-% \macro{\exf@out}
-% Reserve file handle:
+% \macro{\exf@solfile}
+% Reserve file handles:
% \begin{macrocode}
-\newwrite\exf@out
+\newwrite\exf@solfile
+\newwrite\exf@probfile
% \end{macrocode}
% \macro{\exf@writeline}
% Write a line to the file:
% \begin{macrocode}
-\newcommand{\exf@writeline}[1]{\immediate\write\exf@out{#1}}
+\newcommand{\exf@writeline}[2]{\immediate\write#1{#2}}
% \end{macrocode}
% \macro{\exf@linesep}
@@ -4320,82 +4614,120 @@ clean-all: clean
l.\the\inputlineno}
% \end{macrocode}
-% \macro{\exf@startfile}
-% Open a new file |#1.sol| (do nothing if already open);
+% \macro{\exf@start@solfile}
+% Open a new solution file |#1.sol| (do nothing if already open);
% indicate source, switch to manual solution display mode:
% \begin{macrocode}
-\newcommand{\exf@startfile}[1]{%
- \ifexf@infile\else%
- \global\exf@infiletrue%
- \gdef\exf@solutionbelow{manual}%
+\newcommand{\exf@start@solfile}[1]{%
+ \ifexf@solfile@open\else%
+ \exercisestyle{solutionbelow=manual}%
+ \global\exf@solfile@opentrue%
\edef\exf@tmp{#1}%
- \immediate\openout\exf@out\exf@tmp.sol%
- \exf@writeline{\@percentchar%
+ \immediate\openout\exf@solfile\exf@tmp\exf@config@extsolutions\relax%
+ \exf@writeline\exf@solfile{\@percentchar%
generated from file `\jobname' by exframe.sty}%
- \ifexf@lineno\exf@writeline{\exf@lineno}\fi%
- \exf@writeline{}%
+ \ifexf@lineno\exf@writeline\exf@solfile{\exf@lineno}\fi%
+ \exf@writeline\exf@solfile{}%
\fi}
% \end{macrocode}
-% \macro{\exf@closefile}
-% Close file (if open);
+% \macro{\exf@close@solfile}
+% Close solution file (if open);
% indicate position, close and reset variables:
% \begin{macrocode}
-\newcommand{\exf@closefile}{%
- \ifexf@infile%
- \ifexf@lineno%
- \exf@writeline{\exf@linesep}\exf@writeline{\exf@lineno}\fi%
- \exf@writeline{\@backslashchar endinput}%
- \immediate\closeout\exf@out%
- \global\exf@infilefalse%
+\newcommand{\exf@close@solfile}{%
+ \ifexf@solfile@open%
+ \ifexf@lineno\exf@writeline\exf@solfile{\exf@linesep}%
+ \exf@writeline\exf@solfile{\exf@lineno}\fi%
+ \exf@writeline\exf@solfile{\@backslashchar endinput}%
+ \immediate\closeout\exf@solfile%
+ \global\exf@solfile@openfalse%
\fi}
% \end{macrocode}
-% Make sure to properly close file at the end:
+% \macro{\exf@start@probfile}
+% Open a new problem file |#1.prb| (do nothing if already open);
+% indicate source, switch to manual problem display mode:
% \begin{macrocode}
-\AtEndDocument{\exf@closefile}
+\newcommand{\exf@start@probfile}[1]{%
+ \ifexf@probfile@open\else%
+ \global\exf@probfile@opentrue%
+ \edef\exf@tmp{#1}%
+ \immediate\openout\exf@probfile\exf@tmp\exf@config@extproblems\relax%
+ \exf@writeline\exf@probfile{\@percentchar%
+ generated from file `\jobname' by exframe.sty}%
+ \ifexf@lineno\exf@writeline\exf@probfile{\exf@lineno}\fi%
+ \exf@writeline\exf@probfile{}%
+ \fi}
+% \end{macrocode}
+
+% \macro{\exf@close@probfile}
+% Close problem file (if open);
+% indicate position, close and reset variables:
+% \begin{macrocode}
+\newcommand{\exf@close@probfile}{%
+ \ifexf@probfile@open%
+ \ifexf@lineno\exf@writeline\exf@probfile{\exf@linesep}%
+ \exf@writeline\exf@probfile{\exf@lineno}\fi%
+ \exf@writeline\exf@probfile{\@backslashchar endinput}%
+ \immediate\closeout\exf@probfile%
+ \global\exf@probfile@openfalse%
+ \fi}
+% \end{macrocode}
+
+% Make sure to properly close files at the end:
+% \begin{macrocode}
+\AtEndDocument{\exf@close@solfile\exf@close@probfile}
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Solution Buffer.}
+% \paragraph{Buffers.}
%
-% \macro{\exf@buf}
-% \macro{\ifexf@bufclean}
-% Declare a token buffer for storing the solutions
-% and a conditional indicating whether the buffer has been used:
+% \macro{\exf@solbuf}
+% \macro{\exf@probbuf}
+% \macro{\ifexf@solbuf@clean}
+% \macro{\ifexf@probbuf@clean}
+% Declare token buffers for storing problems and solutions
+% and conditionals indicating whether the buffers have been used:
% \begin{macrocode}
-\newtoks\exf@buf
-\newif\ifexf@bufclean\exf@bufcleantrue
+\newtoks\exf@solbuf
+\newtoks\exf@probbuf
+\newif\ifexf@solbuf@clean\exf@solbuf@cleantrue
+\newif\ifexf@probbuf@clean\exf@probbuf@cleantrue
% \end{macrocode}
-
-% \macro{\exf@clearbuf}
-% Clear solution buffer and mark clean:
+% \macro{\exf@clear@solbuf}
+% \macro{\exf@clear@probbuf}
+% Clear a buffer and mark clean:
% \begin{macrocode}
-\def\exf@clearbuf{\global\exf@bufcleantrue\global\exf@buf={}}
+\def\exf@clear@solbuf{\global\exf@solbuf@cleantrue\global\exf@solbuf={}}
+\def\exf@clear@probbuf{\global\exf@probbuf@cleantrue\global\exf@probbuf={}}
% \end{macrocode}
+
% \macro{\exf@append@buf}
% Append tokens to buffer:
% \begin{macrocode}
-\def\exf@append@buf#1{\global\exf@buf=\expandafter{\the\exf@buf#1}}
+\def\exf@append@buf#1#2{\global#1=\expandafter{\the#1#2}}
% \end{macrocode}
-% \macro{\exf@addbufline}
+% \macro{\exf@addline}
% Add a protected expanded line to the buffer:
% \begin{macrocode}
-\def\exf@addbufline#1{{\protected@edef\exf@tmp{#1}%
- \exf@exptwo\exf@append@buf{\exf@tmp^^J}}}
+\def\exf@addline#1#2{{\protected@edef\exf@tmp{#2}%
+ \exf@exparg{\exf@append@buf#1}{\exf@tmp^^J}}}
% \end{macrocode}
-
-% \macro{\exf@sourcebuf}
-% Source the solution buffer into the document:
+% \macro{\exf@source@buf}
+% Source a buffer into the document:
% \begin{macrocode}
-\def\exf@sourcebuf{\exf@exptwo\scantokens{\the\exf@buf}}
+\def\exf@source@buf#1{\exf@exptwo\scantokens{\the#1}}
% \end{macrocode}
-% \macro{\exf@writebuf}
+% \macro{\exf@write@buf}
% Write the buffer into the solution file:
% \begin{macrocode}
-\def\exf@writebuf{\exf@writeline{\the\exf@buf}}
+\def\exf@write@buf#1#2{\exf@writeline#1{\the#2}}
% \end{macrocode}
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \paragraph{Verbatim Processing.}
+%
% \macro{\exf@verbatim}
% Start reading the buffer from the environment body:
% \begin{macrocode}
@@ -4404,7 +4736,8 @@ clean-all: clean
\@bsphack%
\let\do\@makeother\dospecials%
\catcode`\^^M\active%
- \def\verbatim@processline{\exf@exptwo\exf@append@buf{\the\verbatim@line^^J}}%
+ \def\verbatim@processline{\exf@exptwo\exf@verbatim@process%
+ {\the\verbatim@line^^J}}%
\verbatim@start}
% \end{macrocode}
@@ -4415,8 +4748,8 @@ clean-all: clean
% \end{macrocode}
% \macro{\exf@scanblock}
-% Scan an optional argument from a verbatim block;
-% allow for an empty block and an empty first line;
+% Scan an optional argument from a verbatim environment;
+% allow for an empty environment and an empty first line;
% argument |#1| is macro to be called eventually:
% \begin{macrocode}
\def\exf@scanblock#1{%
@@ -4429,12 +4762,12 @@ clean-all: clean
% \begin{macrocode}
\long\def\exf@scanblock@par#1\par{\exf@scanblock@sel{#1}[]}
% \end{macrocode}
-% Check for optional argument (|[|) and for block ending (|\end|):
+% Check for optional argument (|[|) and for environment ending (|\end|):
% \begin{macrocode}
\def\exf@scanblock@sel#1{\@ifnextchar[{\exf@scanblock@opt{#1}}%
{\@ifnextchar\end{\exf@scanblock@end{#1}}{\exf@scanblock@noopt{#1}}}}
% \end{macrocode}
-% Handle empty block, hopefully environment matches (otherwise?!):
+% Handle empty environment, hopefully environment matches (otherwise?!):
% \begin{macrocode}
\def\exf@scanblock@end#1\end#2{%
\def\exf@tmp{#2}\ifx\exf@tmp\@currenvir%
@@ -4520,6 +4853,20 @@ clean-all: clean
\expandafter#1\exf@tmp}
% \end{macrocode}
+% \macro{\switchpoints}
+% Extract main (plain) and bonus (starred) part from points,
+% and execute one of three:
+% \begin{macrocode}
+\newcommand{\switchpoints}[5]{\edef\exf@tmp{#5}%
+ \exf@exptwo\exf@scanpoints\exf@tmp\exf@tmp++&%
+ \expandafter\exf@switchpoints\exf@tmp{#1}{#2}{#3}{#4}}
+\newcommand{\exf@switchpoints}[6]{%
+ \ifdim#2pt=0pt\ifdim#1pt=0pt\def\exf@tmp##1##2{#6}%
+ \else\def\exf@tmp##1##2{#3}\fi%
+ \else\ifdim#1pt=0pt\def\exf@tmp##1##2{#4}%
+ \else\def\exf@tmp##1##2{#5}\fi\fi\exf@tmp{#1}{#2}}
+% \end{macrocode}
+
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Tools.}
%
@@ -4571,12 +4918,12 @@ clean-all: clean
\def\exf@splitdecimal#1.#2.#3&{\def\exf@splitint{#1}\def\exf@splitdec{#2}}
% \end{macrocode}
-% \macro{\exf@nicefrac}
+% \macro{\showfracpoints}
% Display a float number as a fraction
% with denominators 2, 4 or 8 when possible;
% first split number, complete missing zeros and handle cases:
% \begin{macrocode}
-\newcommand{\exf@nicefrac}[1]{%
+\newcommand{\showfracpoints}[1]{%
\edef\exf@tmp{#1}%
\expandafter\exf@splitsign\exf@tmp--&%
\expandafter\exf@splitdecimal\exf@splitnum..&%
@@ -4584,22 +4931,22 @@ clean-all: clean
\if&\exf@splitdec&\def\exf@splitdec{0}\fi%
\def\exf@tmp{\exf@splitint.\exf@splitdec}%
\ifnum\exf@splitdec=0\def\exf@tmp{\exf@splitint}\fi%
- \ifnum\exf@splitdec=5\def\exf@tmp{\exf@intfrac{\exf@splitint}{1}{2}}\fi%
- \ifnum\exf@splitdec=25\def\exf@tmp{\exf@intfrac{\exf@splitint}{1}{4}}\fi%
- \ifnum\exf@splitdec=75\def\exf@tmp{\exf@intfrac{\exf@splitint}{3}{4}}\fi%
- \ifnum\exf@splitdec=125\def\exf@tmp{\exf@intfrac{\exf@splitint}{1}{8}}\fi%
- \ifnum\exf@splitdec=375\def\exf@tmp{\exf@intfrac{\exf@splitint}{3}{8}}\fi%
- \ifnum\exf@splitdec=625\def\exf@tmp{\exf@intfrac{\exf@splitint}{5}{8}}\fi%
- \ifnum\exf@splitdec=875\def\exf@tmp{\exf@intfrac{\exf@splitint}{7}{8}}\fi%
+ \ifnum\exf@splitdec=5\def\exf@tmp{\exf@config@frac{\exf@splitint}{1}{2}}\fi%
+ \ifnum\exf@splitdec=25\def\exf@tmp{\exf@config@frac{\exf@splitint}{1}{4}}\fi%
+ \ifnum\exf@splitdec=75\def\exf@tmp{\exf@config@frac{\exf@splitint}{3}{4}}\fi%
+ \ifnum\exf@splitdec=125\def\exf@tmp{\exf@config@frac{\exf@splitint}{1}{8}}\fi%
+ \ifnum\exf@splitdec=375\def\exf@tmp{\exf@config@frac{\exf@splitint}{3}{8}}\fi%
+ \ifnum\exf@splitdec=625\def\exf@tmp{\exf@config@frac{\exf@splitint}{5}{8}}\fi%
+ \ifnum\exf@splitdec=875\def\exf@tmp{\exf@config@frac{\exf@splitint}{7}{8}}\fi%
\ifx\exf@splitminus\exf@empty\else$\exf@splitminus$\fi\exf@tmp%
}
% \end{macrocode}
-% \macro{\exf@intfrac}
+% \macro{\exf@config@frac}
% Display a vulgar fraction
% such as 12$^3\mskip-4mu/\mskip-2mu_4$:
% \begin{macrocode}
-\newcommand{\exf@intfrac}[3]{%
+\newcommand{\exf@config@frac}[3]{%
\ifnum#1=0\else#1\fi%
\ifnum#2=0\else$%
^{\exf@text{#2}}%
@@ -4629,10 +4976,13 @@ clean-all: clean
{\exf@formatpoints{#1}{#2}}}}
% \end{macrocode}
% \macro{\getsheetpoints}
-% Read sheet points stored in |.aux| file:
+% Read points for current sheet or from |.aux| file:
% \begin{macrocode}
-\newcommand{\getsheetpoints}[1]{\ifcsname exf@sheetpoints@#1\endcsname%
- \csname exf@sheetpoints@#1\endcsname\else 0\fi}
+\newcommand{\getsheetpoints}[1]{\if&#1&%
+ \ifdefined\exf@sheet@points%
+ \expandafter\exf@formatpoints\exf@sheet@points\else 0\fi%
+ \else\ifcsname exf@sheetpoints@#1\endcsname%
+ \csname exf@sheetpoints@#1\endcsname\else 0\fi\fi}
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -4657,21 +5007,34 @@ clean-all: clean
{\exf@formatpoints{#1}{#2}}}}
% \end{macrocode}
% \macro{\getproblempoints}
-% Read problem points stored in |.aux| file:
+% Read points for current problem or from |.aux| file:
+% \begin{macrocode}
+\newcommand{\getproblempoints}[1]{\if&#1&%
+ \ifdefined\exf@problem@points%
+ \expandafter\exf@formatpoints\exf@problem@points\else 0\fi%
+ \else\ifcsname exf@problempoints@#1\endcsname%
+ \csname exf@problempoints@#1\endcsname\else 0\fi\fi}
+% \end{macrocode}
+% \macro{\getsubproblempoints}
+% Read points for current subproblem:
% \begin{macrocode}
-\newcommand{\getproblempoints}[1]{\ifcsname exf@problempoints@#1\endcsname%
- \csname exf@problempoints@#1\endcsname\else 0\fi}
+\newcommand{\getsubproblempoints}[1]{\if&#1&%
+ \ifdefined\exf@subproblem@points%
+ \expandafter\exf@formatpoints\exf@subproblem@points\else 0\fi%
+ \else 0\fi}
% \end{macrocode}
% \macro{\showpoints}
% Show points within a problem or subproblem:
% \begin{macrocode}
\newcommand{\showpoints}{%
- \ifdefined\exf@in@subproblem\exf@outpoints{\exf@ensuretext}%
- {\exf@config@composepointspairbody}{\exf@subproblem@points}%
+ \ifdefined\exf@in@solution\exf@outpoints{\exf@ensuretext}%
+ {\exf@config@composepointspairbodysolution}{\exf@solution@points@show}%
+ \else\ifdefined\exf@in@subproblem\exf@outpoints{\exf@ensuretext}%
+ {\exf@config@composepointspairbodysubproblem}{\exf@subproblem@points@show}%
\else\ifdefined\exf@in@problem\exf@outpoints{\exf@ensuretext}%
- {\exf@config@composepointspairbody}{\exf@problem@points@show}%
- \fi\fi}
+ {\exf@config@composepointspairbodyproblem}{\exf@problem@points@show}%
+ \fi\fi\fi}
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -4701,17 +5064,23 @@ clean-all: clean
\newcommand{\awardpoints}{\@ifstar\exf@awardpointsalt\exf@awardpointsreg}
% \end{macrocode}
+% \macro{\getsolutionpoints}
+% Read points for current solution:
+% \begin{macrocode}
+\newcommand{\getsolutionpoints}[1]{\if&#1&%
+ \ifdefined\exf@solution@points%
+ \expandafter\exf@formatpoints\exf@solution@points\else 0\fi%
+ \else 0\fi}
+% \end{macrocode}
+
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \subsection{Environments}
-% \label{sec:imp-env}
-%
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Sheets.}
+% \subsection{Sheet Environment}
+% \label{sec:imp-sheet}
%
% \macro{exf@sheet}
% Define options for |sheet| environment:
% \begin{macrocode}
-\define@key{exf@sheet}{points}{\exf@scanpoints\exf@points@given#1++&}
+\define@key{exf@sheet}{points}{\exf@scanpoints\exf@sheet@points#1++&}
\define@key{exf@sheet}{number}{\setcounter{\exf@sheetcounter}{#1}}
\define@key{exf@sheet}{label}{\def\exf@label{#1}}
\define@key{exf@sheet}{tag}{\def\sheettag{#1}}
@@ -4738,7 +5107,7 @@ clean-all: clean
% \end{macrocode}
% Reset optional arguments, process arguments:
% \begin{macrocode}
- \let\exf@points@given\@undefined%
+ \let\exf@sheet@points\@undefined%
\def\sheettag{\csname the\exf@sheetcounter\endcsname}%
\let\exf@sheet@points@total\@undefined%
\let\exf@label\@undefined%
@@ -4751,12 +5120,13 @@ clean-all: clean
% \end{macrocode}
% Set points from explicit input or from |.aux| storage:
% \begin{macrocode}
- \let\exf@sheet@points\@undefined%
- \ifdefined\exf@points@given%
- \let\exf@sheet@points\exf@points@given%
- \else\ifcsname exf@sheetpoints@\sheettag\endcsname%
- \exf@csdotwo\let\exf@tmp{exf@sheetpoints@\sheettag}%
- \exf@exptwo\exf@scanpoints\exf@sheet@points\exf@tmp++&%
+ \ifdefined\exf@sheet@points%
+ \let\exf@sheet@points@given\exf@empty%
+ \else%
+ \let\exf@sheet@points@given\@undefined%
+ \ifcsname exf@sheetpoints@\sheettag\endcsname%
+ \exf@csdotwo\let\exf@tmp{exf@sheetpoints@\sheettag}%
+ \exf@exptwo\exf@scanpoints\exf@sheet@points\exf@tmp++&%
\fi\fi%
% \end{macrocode}
% Process metadata:
@@ -4782,7 +5152,7 @@ clean-all: clean
% End of environment;
% perform sanity check on total points if given explicitly:
% \begin{macrocode}
- {\ifdefined\exf@points@given%
+ {\ifdefined\exf@sheet@points@given%
\exf@warnmismatch{\exf@sheetname}{\exf@sheetcounter}%
{\exf@sheet@points@total}{\exf@sheet@points}%
% \end{macrocode}
@@ -4832,22 +5202,26 @@ clean-all: clean
\thispagestyle{empty}\hbox{}\newpage\fi\fi}
% \end{macrocode}
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \subsection{Problem Environment}
+% \label{sec:imp-problem}
+%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Problems.}
+% \paragraph{Print Problems.}
%
% \macro{exf@problem}
% Define options for |problem| environment:
% \begin{macrocode}
-\define@key{exf@problem}{points}{\exf@scanpoints\exf@points@given#1++&}
+\define@key{exf@problem}{points}{\exf@scanpoints\exf@problem@points#1++&}
\define@key{exf@problem}{label}{\def\exf@label{#1}}
\define@key{exf@problem}{tag}{\def\problemtag{#1}}
\define@key{exf@problem}{sollabel}{\xdef\exf@sollabel{#1}}
% \end{macrocode}
-% \macro{problem}
-% Define |problem| environment (potentially using custom name):
+% \macro{printproblem}
+% Define |printproblem| environment:
% \begin{macrocode}
-\newenvironment{\exf@problemname}[1][]{%
+\newenvironment{printproblem}[1]{%
% \end{macrocode}
% Start with new paragraph, set text style, add vspace:
% \begin{macrocode}
@@ -4879,11 +5253,11 @@ clean-all: clean
% \begin{macrocode}
\exf@init@block{\exf@config@skipprobleminfo}%
\def\problemtag{\csname the\exf@problemcounter\endcsname}%
- \let\exf@points@given\@undefined%
+ \let\exf@problem@points\@undefined%
\let\exf@label\@undefined%
\global\let\exf@sollabel\@undefined%
\let\exf@problem@points@total\@undefined%
- \setkeys{exf@problem,exf@probleminfo}{#1}%
+ \setkeys{exf@problem,exf@probleminfo,exf@scanproblem}{#1}%
% \end{macrocode}
% Process automatic and manual labels:
% \begin{macrocode}
@@ -4908,12 +5282,13 @@ clean-all: clean
% \end{macrocode}
% Set points from explicit input or from |.aux| storage:
% \begin{macrocode}
- \let\exf@problem@points\@undefined%
- \ifdefined\exf@points@given%
- \let\exf@problem@points\exf@points@given%
- \else\ifcsname exf@problempoints@\problemtag\endcsname%
- \exf@csdotwo\let\exf@tmp{exf@problempoints@\problemtag}%
- \exf@exptwo\exf@scanpoints\exf@problem@points\exf@tmp++&%
+ \ifdefined\exf@problem@points%
+ \let\exf@problem@points@given\exf@empty%
+ \else%
+ \let\exf@problem@points@given\@undefined%
+ \ifcsname exf@problempoints@\problemtag\endcsname%
+ \exf@csdotwo\let\exf@tmp{exf@problempoints@\problemtag}%
+ \exf@exptwo\exf@scanpoints\exf@problem@points\exf@tmp++&%
\fi\fi%
\global\let\exf@prevpoints\exf@problem@points%
\let\exf@problem@points@show\@undefined%
@@ -4929,9 +5304,9 @@ clean-all: clean
% expand points into argument and remove points:
% \begin{macrocode}
\exf@ifis\exf@pointsat{start}{\exf@outpoints{\exf@append@intro}%
- {\exf@config@composepointspairstart}{\exf@problem@points@show}}%
+ {\exf@config@composepointspairstartproblem}{\exf@problem@points@show}}%
\exf@ifis\exf@pointsat{start*}{\exf@outpoints{\exf@prepend@intro}%
- {\exf@config@composepointspairstart}{\exf@problem@points@show}}%
+ {\exf@config@composepointspairstartproblem}{\exf@problem@points@show}}%
% \end{macrocode}
% Insert hook code, set problem body style:
% \begin{macrocode}
@@ -5001,7 +5376,7 @@ clean-all: clean
% \end{macrocode}
% Perform sanity checks on total points if given explicitly:
% \begin{macrocode}
- \ifdefined\exf@points@given%
+ \ifdefined\exf@problem@points@given%
\exf@warnmismatch{\exf@problemname}{\exf@problemcounter}%
{\exf@problem@points@total}{\exf@problem@points}%
% \end{macrocode}
@@ -5026,12 +5401,12 @@ clean-all: clean
\PackageWarning{exframe}{no points defined for \exf@problemname}%
\fi\fi%
% \end{macrocode}
-% Solutions to subproblems must be declared within problem block:
+% Solutions to subproblems must be declared within problem environment:
% \begin{macrocode}
\global\let\exf@prevsubprob\@undefined%
\global\let\exf@prevsubprobhref\@undefined%
% \end{macrocode}
-% End paragraph and block:
+% End paragraph and environment:
% \begin{macrocode}
\par\exf@close@block%
% \end{macrocode}
@@ -5068,7 +5443,208 @@ clean-all: clean
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Subproblems.}
+% \paragraph{Read Problem Environment.}
+%
+% \macro{exf@scanproblem}
+% Define options for |problem| environment:
+% \begin{macrocode}
+\define@boolkey{exf@scanproblem}[exf@scanproblem@]{disable}[true]{}
+% \end{macrocode}
+
+% \macro{exf@problem@direct}
+% Define direct output version of |problem| environment;
+% pass on to |printproblem| environment:
+% \begin{macrocode}
+\newenvironment{exf@problem@direct}[1][]%
+ {\printproblem{#1}}{\endprintproblem\ignorespacesafterend}
+% \end{macrocode}
+
+% \macro{exf@problem@scan}
+% \macro{exf@scanproblem}
+% Define scan version of |problem| environment;
+% use |\exf@scanblock| to properly parse optional argument
+% and pass on to |exf@scanproblem|:
+% \begin{macrocode}
+\newenvironment{exf@problem@scan}%
+ {\exf@scanblock{\exf@scanproblem}}{\endexf@scanproblem}%
+\newenvironment{exf@scanproblem}[2]{%
+% \end{macrocode}
+% Determine problem display:
+% \begin{macrocode}
+ \exf@scanproblem@disablefalse%
+ \setkeys*{exf@scanproblem}{#1}%
+ \exf@config@insertproblemselect{#1}%
+% \end{macrocode}
+% Write separator and |printproblem| environment to buffer:
+% \begin{macrocode}
+ \ifexf@scanproblem@disable%
+ \def\exf@verbatim@process{\@gobble}%
+ \else%
+ \ifexf@lineno\exf@addline\exf@probbuf{\exf@linesep}%
+ \exf@addline\exf@probbuf{\exf@lineno}\fi%
+ \exf@addline\exf@probbuf%
+ {\@backslashchar begin{printproblem}{#1}}%
+ \def\exf@verbatim@process{\exf@append@buf\exf@probbuf}%
+ \fi%
+% \end{macrocode}
+% Start verbatim processing:
+% \begin{macrocode}
+ \exf@verbatim#2}%
+% \end{macrocode}
+% End verbatim processing; close |printproblem| environment:
+% \begin{macrocode}
+ {\exf@endverbatim%
+ \ifexf@scanproblem@disable\else%
+ \exf@addline\exf@probbuf{\@backslashchar end{printproblem}}%
+ \global\exf@probbuf@cleanfalse%
+ \fi%
+% \end{macrocode}
+% Write buffer to file if output file open:
+% \begin{macrocode}
+ \ifexf@probfile@open%
+ \exf@write@buf\exf@probfile\exf@probbuf%
+ \exf@clear@probbuf%
+ \fi%
+% \end{macrocode}
+% Output buffer immediately:
+% \begin{macrocode}
+ \ifexf@problemmanual\else%
+ \exf@source@buf\exf@probbuf%
+ \exf@clear@probbuf%
+ \fi%
+% \end{macrocode}
+% Done:
+% \begin{macrocode}
+ \ignorespacesafterend}
+% \end{macrocode}
+
+% \macro{problem}
+% Define |problem| environment
+% (potentially using custom name)
+% to choose between direct and buffered version:
+% \begin{macrocode}
+\newenvironment{\exf@problemname}%
+ {\ifexf@problembuf\let\exf@tmp\exf@problem@scan%
+ \else\let\exf@tmp\exf@problem@direct\fi%
+ \exf@tmp}%
+ {\ifexf@problembuf\let\exf@tmp\endexf@problem@scan%
+ \else\let\exf@tmp\endexf@problem@direct\fi%
+ \exf@tmp}
+% \end{macrocode}
+
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \subsection{Problem Blocks}
+% \label{sec:imp-problems}
+%
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \paragraph{Problem Block Handling.}
+%
+% \macro{\exf@problemstitle}
+% Compose the title for a problem block section:
+% \begin{macrocode}
+\newcommand{\exf@problemstitle}{%
+% \end{macrocode}
+% Check whether title is empty:
+% \begin{macrocode}
+ \protected@edef\exf@problemstitleexp{\exf@config@composetitleproblems}%
+ \ifx\exf@problemstitleexp\exf@empty\else%
+% \end{macrocode}
+% Output section line:
+% \begin{macrocode}
+ \exf@section{\exf@config@skipproblemstitle}%
+ {\exf@config@styletitle\exf@config@styletitleproblems%
+ \exf@problemstitleexp}%
+ \exf@addcontentsline{\exf@config@toclevelproblems}%
+ {\exf@config@composetocproblems}%
+ \fi}
+% \end{macrocode}
+
+% \macro{\exf@showproblemsin}
+% Output problem block intro:
+% \begin{macrocode}
+\newcommand{\exf@showproblemsin}{%
+% \end{macrocode}
+% Set problem body style; add vertical space; insert hook code:
+% \begin{macrocode}
+ \par\exf@config@styletext\addvspace{\exf@config@skipproblemsabove}%
+ \exf@config@insertproblemsbefore}
+% \end{macrocode}
+
+% \macro{\exf@showproblemsout}
+% Output problem block outro:
+% \begin{macrocode}
+\newcommand{\exf@showproblemsout}{%
+% \end{macrocode}
+% Insert hook code; close paragraph; add vertical space:
+% \begin{macrocode}
+ \exf@config@insertproblemsafter%
+ \par\exf@config@styletext\addvspace{\exf@config@skipproblemsbelow}}
+% \end{macrocode}
+
+% \macro{\exf@showproblems}
+% Output problem block in buffer:
+% \begin{macrocode}
+\newcommand{\exf@showproblems}{%
+% \end{macrocode}
+% Do nothing if buffer is empty (avoid titles):
+% \begin{macrocode}
+ \ifexf@probbuf@clean\else\begingroup%
+% \end{macrocode}
+% Execute output problem block intro:
+% \begin{macrocode}
+ \exf@showproblemsin%
+ \exf@problemstitle%
+% \end{macrocode}
+% Source and clear buffer:
+% \begin{macrocode}
+ \exf@source@buf\exf@probbuf%
+ \exf@clear@probbuf%
+% \end{macrocode}
+% Execute output problem block outro:
+% \begin{macrocode}
+ \exf@showproblemsout%
+ \endgroup\fi}
+% \end{macrocode}
+
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \paragraph{Problems Buffer Interface.}
+%
+% \macro{\writeproblems}
+% Open a file |#1.prb| for writing problems;
+% default is present main file name:
+% \begin{macrocode}
+\newcommand{\writeproblems}[1][\jobname]{%
+ \exf@close@probfile\exf@start@probfile{#1}}
+% \end{macrocode}
+
+% \macro{\closeproblems}
+% Close problems output file (if open):
+% \begin{macrocode}
+\newcommand{\closeproblems}{\exf@close@probfile}
+% \end{macrocode}
+
+% \macro{\readproblems}
+% Read problems from file |#1.prb|;
+% default is present main file name;
+% switch layout and add heading:
+% \begin{macrocode}
+\newcommand{\readproblems}[1][\jobname]{\exf@close@probfile%
+ \begingroup%
+ \exf@config@styletext\exf@config@styletextproblem%
+ \exf@problemstitle%
+ \input{#1\exf@config@extproblems}%
+ \endgroup}
+% \end{macrocode}
+
+% \macro{\insertproblems}
+% Show problems buffer:
+% \begin{macrocode}
+\newcommand{\insertproblems}{\exf@showproblems}
+% \end{macrocode}
+
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \subsection{Subproblem Environment}
+% \label{sec:imp-subproblem}
%
% \macro{exf@subproblem}
% Define options for |subproblem| environment:
@@ -5115,6 +5691,14 @@ clean-all: clean
\csname theH\exf@subproblemcounter\endcsname}%
\fi%
% \end{macrocode}
+% Remeber points for display;
+% disable points display if desired:
+% \begin{macrocode}
+ \let\exf@subproblem@points@show\@undefined%
+ \ifdefined\exf@subproblem@points%
+ \let\exf@subproblem@points@show\exf@subproblem@points\fi%
+ \exf@ifis\exf@subpointsat{off}{\let\exf@subproblem@points@show\@undefined}%
+% \end{macrocode}
% Add given points to problem total:
% \begin{macrocode}
\ifdefined\exf@subproblem@points%
@@ -5129,17 +5713,13 @@ clean-all: clean
\fi%
\fi%
% \end{macrocode}
-% Disable points display if desired:
-% \begin{macrocode}
- \exf@ifis\exf@subpointsat{off}{\let\exf@subproblem@points\@undefined}%
-% \end{macrocode}
% Display points in opening line if desired;
% expand points into argument and remove points:
% \begin{macrocode}
\exf@ifis\exf@subpointsat{start}{\exf@outpoints{\exf@append@intro}%
- {\exf@config@composepointspairstart}{\exf@subproblem@points}}%
+ {\exf@config@composepointspairstartsubproblem}{\exf@subproblem@points@show}}%
\exf@ifis\exf@subpointsat{start*}{\exf@outpoints{\exf@prepend@intro}%
- {\exf@config@composepointspairstart}{\exf@subproblem@points}}%
+ {\exf@config@composepointspairstartsubproblem}{\exf@subproblem@points@show}}%
% \end{macrocode}
% Insert hook code:
% \begin{macrocode}
@@ -5179,7 +5759,7 @@ clean-all: clean
% \begin{macrocode}
\exf@ifis\exf@subpointsat{margin}{%
\exf@outpoints{\exf@prepend@def\exf@introitem}%
- {\exf@makepointsmargin}{\exf@subproblem@points}}%
+ {\exf@makepointsmargin}{\exf@subproblem@points@show}}%
% \end{macrocode}
% Write out opening line:
% \begin{macrocode}
@@ -5193,7 +5773,7 @@ clean-all: clean
% \begin{macrocode}
{\exf@ifis\exf@subpointsat{end}{\showpoints}%
% \end{macrocode}
-% End paragraph and block:
+% End paragraph and environment:
% \begin{macrocode}
\par\exf@close@block%
% \end{macrocode}
@@ -5222,6 +5802,10 @@ clean-all: clean
\ignorespacesafterend}
% \end{macrocode}
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \subsection{Solution Environment}
+% \label{sec:imp-solution}
+%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Print Solutions.}
%
@@ -5240,7 +5824,7 @@ clean-all: clean
% \macro{printsolution}
% Define |printsolution| environment
-% to display a previously read |solution| block;
+% to display a previously read |solution| environment;
% this works analogously to |problem| and |subproblem|:
% \begin{macrocode}
\newenvironment{printsolution}[1]{%
@@ -5262,12 +5846,14 @@ clean-all: clean
\let\theHequation\theHexf@solutionequation%
\fi%
% \end{macrocode}
-% Start a block, initialise variables, process arguments:
+% Start a group, initialise variables, process arguments:
% \begin{macrocode}
\begingroup%
+ \def\exf@in@solution{}%
\def\exf@solprob{}%
\def\exf@solsubprob{}%
\let\exf@label\@undefined%
+ \let\exf@solution@points\@undefined%
\let\exf@solution@points@total\@undefined%
\def\exf@solhref{}%
\exf@init@block{\exf@config@skipsolutioninfo}%
@@ -5283,6 +5869,22 @@ clean-all: clean
% \begin{macrocode}
\ifdefined\exf@label\label{\exf@label}\fi%
% \end{macrocode}
+% Remeber points for display;
+% disable points display if desired:
+% \begin{macrocode}
+ \let\exf@solution@points@show\@undefined%
+ \ifdefined\exf@solution@points%
+ \let\exf@solution@points@show\exf@solution@points\fi%
+ \exf@ifis\exf@solpointsat{off}{\let\exf@solution@points@show\@undefined}%
+% \end{macrocode}
+% Display points in opening line if desired;
+% expand points into argument and remove points:
+% \begin{macrocode}
+ \exf@ifis\exf@solpointsat{start}{\exf@outpoints{\exf@append@intro}%
+ {\exf@config@composepointspairstartsolution}{\exf@solution@points@show}}%
+ \exf@ifis\exf@solpointsat{start*}{\exf@outpoints{\exf@prepend@intro}%
+ {\exf@config@composepointspairstartsolution}{\exf@solution@points@show}}%
+% \end{macrocode}
% Insert hook code, set solution body style:
% \begin{macrocode}
\exf@config@insertsolutioninfo%
@@ -5325,7 +5927,7 @@ clean-all: clean
\fi\exf@config@composeitemsolutionsep}%
\fi%
% \end{macrocode}
-% Set item label up depending on problem or subproblem:
+% Set item label depending on problem or subproblem:
% \begin{macrocode}
\ifx\exf@solsubprob\exf@empty%
\protected@edef\exf@solution@item%
@@ -5344,6 +5946,13 @@ clean-all: clean
\exf@config@composeitemproblemsep}}%
\fi%
% \end{macrocode}
+% Write points into margin if desired;
+% expand points into argument and remove points:
+% \begin{macrocode}
+ \exf@ifis\exf@solpointsat{margin}{%
+ \exf@outpoints{\exf@prepend@def\exf@introitem}%
+ {\exf@makepointsmargin}{\exf@solution@points@show}}%
+% \end{macrocode}
% Write out opening line:
% \begin{macrocode}
\exf@open@block{\exf@config@skipsolutiontitle}%
@@ -5354,10 +5963,11 @@ clean-all: clean
% \end{macrocode}
% End environment, show points if desired, perform sanity check:
% \begin{macrocode}
- {\exf@warnmismatch{\exf@solutionname}{\exf@solutioncounter}%
+ {\exf@ifis\exf@solpointsat{end}{\showpoints}%
+ \exf@warnmismatch{\exf@solutionname}{\exf@solutioncounter}%
{\exf@solution@points@total}{\exf@solution@points}%
% \end{macrocode}
-% End paragraph and block:
+% End paragraph and envionment:
% \begin{macrocode}
\par\exf@close@block%
% \end{macrocode}
@@ -5383,7 +5993,7 @@ clean-all: clean
% \end{macrocode}
% \macro{\solutionssection}
-% Define a section for a problem within a block with multiple solutions:
+% Define a section for a problem within a solution block:
% \begin{macrocode}
\newcommand{\solutionssection}[1]{\begingroup%
% \end{macrocode}
@@ -5397,81 +6007,58 @@ clean-all: clean
\setkeys{exf@solution}{#1}%
% \end{macrocode}
% Select title (and table of contents entry)
-% corresponding to multiple problems vs. single problem:
+% corresponding to multiple problems vs.\ single problem:
% \begin{macrocode}
\let\exf@composetitle\exf@config@composetitlesolutionsproblemmulti%
- \def\exf@solutionstoc{\exf@addcontentsline{\exf@config@toclevelsolution}%
- {\exf@config@composetocsolution{\exf@solprob}{\exf@solprobtitle}}}%
\exf@ifis\exf@solutionbelow{problem}{\let\exf@composetitle%
\exf@config@composetitlesolutionsproblemsingle}%
\exf@ifis\exf@solutionbelow{problem*}{\let\exf@composetitle%
\exf@config@composetitlesolutionsproblemsingle}%
+ \def\exf@solutionstoc{\exf@addcontentsline{\exf@config@toclevelsolution}%
+ {\exf@config@composetocsolution{\exf@solprob}{\exf@solprobtitle}}}%
% \end{macrocode}
% Write section line:
% \begin{macrocode}
+ \addvspace{\exf@config@skipsolutionsproblemabove}%
\exf@solutionssection{\exf@config@styletitlesolutionsproblem}%
{\exf@composetitle{\exf@solprob}{\exf@solprobtitle}}%
- {\exf@config@skipsolutionsproblem}%
+ {\exf@config@skipsolutionsproblemtitle}%
{\exf@solutionstoc}{\exf@label}{\exf@solhref}%
\endgroup}
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Read Solution Block to Buffer.}
+% \paragraph{Read Solution Environment.}
%
-% \macro{solution}
-% Define |solution| environment (potentially using custom name);
-% pass to |exf@scansolution| environment via
-% |\exf@scanblock| mechanism;
-% redefine |\exf@scanblock| in |solutionbelow=here*| mode:
-% \begin{macrocode}
-\newenvironment{\exf@solutionname}%
- {\exf@ifis\exf@solutionbelow{here*}{%
- \newcommand{\exf@scanblockplain}[1][]{\exf@scansolution{##1}{}}%
- \def\exf@scanblock##1{\exf@scanblockplain}}%
- \exf@scanblock{\exf@scansolution}}{\endexf@scansolution}%
-% \end{macrocode}
-
-% \macro{exf@scansolution}
-% Define |exf@scansolution| to read solution to buffer and process:
-% \begin{macrocode}
-\newenvironment{exf@scansolution}[2]{%
-% \end{macrocode}
-% If solution is to be displayed immediately,
-% make sure to display points first:
-% \begin{macrocode}
- \exf@ifis\exf@solutionbelow{here}{\showpoints}%
- \exf@ifis\exf@solutionbelow{here*}{\showpoints}%
- \global\exf@bufcleanfalse%
-% \end{macrocode}
+% \macro{\exf@process@solnewsec}
% If this is the first solution within a new section,
-% display section heading:
+% write section heading to buffer:
% \begin{macrocode}
+\newcommand{\exf@process@solnewsec}{%
\ifdefined\exf@problem@solnewsec%
\def\exf@probarg{\ifdefined\exf@prevprob prob={\exf@prevprob}\fi%
\ifdefined\exf@prevprobtitle,probtitle={\exf@prevprobtitle}\fi%
\ifdefined\exf@prevprobhref,href={\exf@prevprobhref}\fi%
\ifdefined\exf@sollabel,label={\exf@sollabel}\fi}%
\exf@ifis\exf@solutionbelow{here}{\let\exf@probarg\@undefined}%
- \exf@ifis\exf@solutionbelow{here*}{\let\exf@probarg\@undefined}%
\exf@ifis\exf@solutionbelow{subproblem}{\let\exf@probarg\@undefined}%
\exf@ifis\exf@solutionbelow{subproblem*}{\let\exf@probarg\@undefined}%
\ifdefined\exf@probarg%
- \ifexf@lineno\exf@addbufline{\exf@linesep}\exf@addbufline{\exf@lineno}\fi%
- \exf@addbufline{\@backslashchar solutionssection{\exf@probarg}}%
- \exf@addbufline{}%
+ \ifexf@lineno\exf@addline\exf@solbuf{\exf@linesep}%
+ \exf@addline\exf@solbuf{\exf@lineno}\fi%
+ \exf@addline\exf@solbuf{\@backslashchar solutionssection{\exf@probarg}}%
+ \exf@addline\exf@solbuf{}%
\fi%
\global\let\exf@problem@solnewsec\@undefined%
- \fi%
-% \end{macrocode}
-% Write separator to buffer:
-% \begin{macrocode}
- \ifexf@lineno\exf@addbufline{\exf@linesep}\exf@addbufline{\exf@lineno}\fi%
+ \fi}%
% \end{macrocode}
+
+% \macro{\exf@process@solnewsec}
% Declare additional arguments to |printsolution|
% to describe corresponding problem and tags:
% \begin{macrocode}
- \def\exf@subprobarg{%
+\newcommand{\exf@generate@solprobarg}{%
+ \edef\exf@solprobarg{%
\ifdefined\exf@prevprob prob={\exf@prevprob},\fi%
\ifdefined\exf@prevsubprob subprob={\exf@prevsubprob},%
\ifdefined\exf@prevsubprobhref href={\exf@prevsubprobhref},\fi%
@@ -5483,48 +6070,76 @@ clean-all: clean
\ifdefined\sheettag sheettag={\sheettag},\fi%
\ifdefined\problemtag problemtag={\problemtag},\fi}%
% \end{macrocode}
-% Write |printsolution| opening to buffer:
-% \begin{macrocode}
- \exf@addbufline{\@backslashchar begin{printsolution}{\exf@subprobarg#1}}%
-% \end{macrocode}
% Clean up:
% \begin{macrocode}
\global\let\exf@prevsubprob\@undefined%
\global\let\exf@prevsubprobhref\@undefined%
- \global\let\exf@prevpoints\@undefined%
+ \global\let\exf@prevpoints\@undefined}%
+% \end{macrocode}
+
+% \macro{exf@solution@direct}
+% Define direct output version of |solution| environment;
+% pass on to |printsolution| environment:
+% \begin{macrocode}
+\newenvironment{exf@solution@direct}[1][]%
+ {\showpoints%
+ \global\let\exf@problem@solnewsec\@undefined%
+ \exf@generate@solprobarg%
+ \exf@showsolutionsin%
+ \let\exf@composetitle\exf@config@composetitlesolutionsingle%
+ \exf@exptwo\printsolution{\exf@solprobarg#1}}%
+ {\endprintsolution%
+ \exf@showsolutionsout%
+ \ignorespacesafterend}%
% \end{macrocode}
-% In |here*| mode, output solution immediately;
-% overwrite verbatim macros to display solution:
+
+% \macro{exf@solution@scan}
+% \macro{exf@scansolution}
+% Define scan version of |solution| environment;
+% use |\exf@scanblock| to properly parse optional argument
+% and pass on to |exf@scansolution|:
% \begin{macrocode}
- \exf@ifis\exf@solutionbelow{here*}{%
- \def\exf@verbatim{\exf@clearbuf\begingroup%
- \edef\exf@subprobarg{\exf@subprobarg}%
- \exf@showsolutionsin{\exf@config@composetitlesolutionsingle}%
- \exf@exptwo\printsolution{\exf@subprobarg#1}}%
- \def\exf@endverbatim{\endprintsolution\exf@showsolutionsout\endgroup}}%
+\newenvironment{exf@solution@scan}%
+ {\exf@scanblock{\exf@scansolution}}{\endexf@scansolution}%
+\newenvironment{exf@scansolution}[2]{%
% \end{macrocode}
-% Verbatim read block to buffer:
+% If solution is to be displayed immediately,
+% make sure to display points first;
+% insert solution section heading in buffer;
+% compose additional arguments to |printsolution|:
% \begin{macrocode}
- \exf@verbatim#2}%
+ \exf@ifis\exf@solutionbelow{here}{\showpoints}%
+ \exf@process@solnewsec%
+ \exf@generate@solprobarg%
% \end{macrocode}
-% End environment; stop reading buffer:
+% Write separator and |printsolution| environment to buffer:
% \begin{macrocode}
- {\exf@endverbatim%
+ \ifexf@lineno\exf@addline\exf@solbuf{\exf@linesep}%
+ \exf@addline\exf@solbuf{\exf@lineno}\fi%
+ \exf@addline\exf@solbuf%
+ {\@backslashchar begin{printsolution}{\exf@solprobarg#1}}%
% \end{macrocode}
-% Write |printsolution| closing to buffer:
+% Start verbatim processing:
% \begin{macrocode}
- \exf@addbufline{\@backslashchar end{printsolution}}%
+ \def\exf@verbatim@process{\exf@append@buf\exf@solbuf}%
+ \exf@verbatim#2}%
+% \end{macrocode}
+% End verbatim processing; close |printsolution| environment:
+% \begin{macrocode}
+ {\exf@endverbatim%
+ \exf@addline\exf@solbuf{\@backslashchar end{printsolution}}%
+ \global\exf@solbuf@cleanfalse%
% \end{macrocode}
% Write buffer to file if output file open:
% \begin{macrocode}
- \ifexf@infile%
- \exf@writebuf%
- \exf@clearbuf%
+ \ifexf@solfile@open%
+ \exf@write@buf\exf@solfile\exf@solbuf%
+ \exf@clear@solbuf%
\fi%
% \end{macrocode}
% Drop buffer if solutions not to be displayed:
% \begin{macrocode}
- \ifsolutions\else\exf@clearbuf\fi%
+ \ifsolutions\else\exf@clear@solbuf\fi%
% \end{macrocode}
% Display solution immediately in various cases:
% \begin{macrocode}
@@ -5546,11 +6161,29 @@ clean-all: clean
\ignorespacesafterend}
% \end{macrocode}
+% \macro{solution}
+% Define |solution| environment
+% (potentially using custom name)
+% to choose between direct and buffered version:
+% \begin{macrocode}
+\newenvironment{\exf@solutionname}%
+ {\ifexf@solutionbuf\let\exf@tmp\exf@solution@scan%
+ \else\let\exf@tmp\exf@solution@direct\fi%
+ \exf@tmp}%
+ {\ifexf@solutionbuf\let\exf@tmp\endexf@solution@scan%
+ \else\let\exf@tmp\endexf@solution@direct\fi%
+ \exf@tmp}
+% \end{macrocode}
+
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \subsection{Solution Blocks}
+% \label{sec:imp-solutions}
+%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Solution Block Handling.}
%
% \macro{\exf@solutionssection}
-% Output solutions section:
+% Output solution block section:
% \begin{macrocode}
\newcommand{\exf@solutionssection}[6]{%
% \end{macrocode}
@@ -5576,7 +6209,7 @@ clean-all: clean
% \end{macrocode}
% \macro{\exf@solutionstitle}
-% Compose the title for a solution section:
+% Compose the title for a solution block:
% \begin{macrocode}
\newcommand{\exf@solutionstitle}{\exf@solutionssection%
{\exf@config@styletitlesolutions}{%
@@ -5586,51 +6219,49 @@ clean-all: clean
% \end{macrocode}
% \macro{\exf@showsolutionsin}
-% Output solutions intro:
+% Output solution block intro:
% \begin{macrocode}
-\newcommand{\exf@showsolutionsin}[1]{%
+\newcommand{\exf@showsolutionsin}{%
% \end{macrocode}
% Set solution body style; add vertical space; insert hook code:
% \begin{macrocode}
\par\exf@config@styletext\addvspace{\exf@config@skipsolutionsabove}%
\exf@config@styletextsolution%
- \exf@config@insertsolutionsbefore%
- \let\exf@composetitle#1}
+ \exf@config@insertsolutionsbefore}
% \end{macrocode}
% \macro{\exf@showsolutionsout}
-% Output solutions outro:
+% Output solution block outro:
% \begin{macrocode}
\newcommand{\exf@showsolutionsout}{%
% \end{macrocode}
-% Ignore most recent skip; insert hook code;
-% close paragraph; add vertical space:
+% Insert hook code; close paragraph; add vertical space:
% \begin{macrocode}
- \removelastskip%
\exf@config@insertsolutionsafter%
- \par\exf@config@styletext\addvspace{\exf@config@skipsolutionbelow}}
+ \par\exf@config@styletext\addvspace{\exf@config@skipsolutionsbelow}}
% \end{macrocode}
% \macro{\exf@showsolutions}
-% Output solutions in buffer:
+% Output solution block in buffer:
% \begin{macrocode}
\newcommand{\exf@showsolutions}[2]{%
% \end{macrocode}
% Do nothing if buffer is empty (avoid titles):
% \begin{macrocode}
- \ifexf@bufclean\else\begingroup%
+ \ifexf@solbuf@clean\else\begingroup%
% \end{macrocode}
-% Execute output solutions intro:
+% Execute output solution block intro:
% \begin{macrocode}
- \exf@showsolutionsin{#1}%
+ \exf@showsolutionsin%
+ \let\exf@composetitle#1%
#2%
% \end{macrocode}
% Source and clear buffer:
% \begin{macrocode}
- \exf@sourcebuf%
- \exf@clearbuf%
+ \exf@source@buf\exf@solbuf%
+ \exf@clear@solbuf%
% \end{macrocode}
-% Execute output solutions outro:
+% Execute output solution block outro:
% \begin{macrocode}
\exf@showsolutionsout%
\endgroup\fi}
@@ -5643,13 +6274,14 @@ clean-all: clean
% Open a file |#1.sol| for writing solutions;
% default is present main file name:
% \begin{macrocode}
-\newcommand{\writesolutions}[1][\jobname]{\exf@closefile\exf@startfile{#1}}
+\newcommand{\writesolutions}[1][\jobname]{%
+ \exf@close@solfile\exf@start@solfile{#1}}
% \end{macrocode}
% \macro{\closesolutions}
-% Close output file (if open):
+% Close solutions output file (if open):
% \begin{macrocode}
-\newcommand{\closesolutions}{\exf@closefile}
+\newcommand{\closesolutions}{\exf@close@solfile}
% \end{macrocode}
% \macro{\readsolutions}
@@ -5657,17 +6289,17 @@ clean-all: clean
% default is present main file name;
% switch layout and add heading:
% \begin{macrocode}
-\newcommand{\readsolutions}[1][\jobname]{\exf@closefile%
+\newcommand{\readsolutions}[1][\jobname]{\exf@close@solfile%
\ifsolutions\begingroup%
\exf@config@styletext\exf@config@styletextsolution%
- \let\exf@config@composetitlesolution\exf@config@composetitlesolutionmulti%
+ \let\exf@composetitle\exf@config@composetitlesolutionmulti%
\exf@solutionstitle%
- \input{#1.sol}%
+ \input{#1\exf@config@extsolutions}%
\endgroup\fi}
% \end{macrocode}
% \macro{\insertsolutions}
-% Show solution buffer:
+% Show solutions buffer:
% \begin{macrocode}
\newcommand{\insertsolutions}{\exf@showsolutions%
{\exf@config@composetitlesolutionmulti}{\exf@solutionstitle}}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:21:29 +0000