summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex')
-rw-r--r--Master/texmf-dist/source/latex/isodoc/isodoc.dtx574
1 files changed, 353 insertions, 221 deletions
diff --git a/Master/texmf-dist/source/latex/isodoc/isodoc.dtx b/Master/texmf-dist/source/latex/isodoc/isodoc.dtx
index 37d2311710f..0f725ef2ec9 100644
--- a/Master/texmf-dist/source/latex/isodoc/isodoc.dtx
+++ b/Master/texmf-dist/source/latex/isodoc/isodoc.dtx
@@ -22,39 +22,24 @@
%<class>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<class>\ProvidesClass{isodoc}%
%<*class>
- [2009/06/15 v0.6 isodoc class for letters and invoices]
+ [2009/11/16 v0.7 isodoc class for letters and invoices]
%</class>
%<class>\ifnum\pdfoutput=1\else\ClassError{isodoc}{Compile me with pdflatex!}{}
%<class>\fi
%<*driver>
-\documentclass[11pt]{ltxdoc}
-\usepackage[
- verbose,
- pdftex,
- paper=a4paper,
- margin=35mm,
- top=15mm,
- bottom=20mm,
- nohead
-]{geometry}
+\documentclass{ltxdoc}
+\usepackage[a4paper,margin=25mm,left=50mm,nohead]{geometry}
\usepackage{txfonts}\pdfprotrudechars=1
-\usepackage{ctable,pdfpages,paralist,marvosym,sverb,ltablex}
-\usepackage[colorlinks]{hyperref}
+\usepackage[l2tabu,orthodox]{nag}
+\usepackage{ctable,pdfpages,paralist,eurosym,sverb,ltablex}
\parindent0pt\parskip1ex
\EnableCrossrefs
\PageIndex
-\RecordChanges
+\IndexPrologue{\section*{Index}}
\newcommand{\FIG}[3]{ % pdfname label caption
- \begin{figure}
- \begin{center}
- \fboxsep=0pt
- \fbox{\includegraphics[width=\hsize]{#1.pdf}}
- \caption{#3\label{#2}}
- \bigskip
- \bigskip
- \bigskip
- \end{center}
- \end{figure}
+ \ctable[label={#2},caption={#3},figure,botcap,framerule=.5pt]{@{}c@{}}{}{%
+ \includegraphics[width=\textwidth]{#1}
+ }
}
\newcommand{\OPTS}[3]{
\smallskip\noindent
@@ -69,13 +54,12 @@
\def\CMP#1{\C{#1}\marginpar{\C{#1}}}
\begin{document}
\DocInput{isodoc.dtx}
- \PrintChanges
\PrintIndex
\end{document}
%</driver>
% \fi
%
-% \CheckSum{1825}
+% \CheckSum{1941}
%
% \CharacterTable
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -96,11 +80,11 @@
% \changes{v0.1}{2006/03/18}{Initial version}
% \changes{v0.2}{2007/04/05}{added options phoneprefix, routingno, logoaddress
% accountname now optional
-% accountnumber-> accountno
+% accountnumber $\Rightarrow$ accountno
% german and french translations corrected
% indents removed in header fields
% expect printer to have more unprintable border
-% ascriptiontext -> accountnametext for dutch
+% ascriptiontext $\Rightarrow$ accountnametext for dutch
% Interdocument language changes now work;
% Vatno, if defined, is reported with accountdata;
% country in returnaddress now separated with dot;
@@ -121,39 +105,48 @@
% }
% \changes{v0.5}{2008/07/12}{text misplacement in subject-less letters
% corrected
-% norwegian translations corrected)
+% norwegian translations corrected
+% }
+% \changes{v0.6}{2008/07/12}{moved all documentation files in subdirectory doc,
+% because files appeared to be wrongly placed on the
+% TeX Collection DVD
+% Some minor corrections
+% }
+% \changes{v0.7}{2010/01/02}{using eurosym package instead of marvosym;
+% using frenchb package instead of french;
+% added addresswidth option, default stays 2 cols;
+% changes suggested by Fabrice Niessen (thanks!):
+% added header/noheader options;
+% added bodyshift option;
+% date format can be yyyy-mm-dd or a literal `today';
+% added forcedate option to enter anything for date;
+% added foldleft and foldright options, default stays right;
+% headingcolor, if defined, colors fancy headings;
+% headcolor, if defined, colors headings in header and footer;
+% foldmarkcolor, if defined, colors foldmark
% }
%
% \DoNotIndex{%
-% \", \baselineskip,\ifdim, \quad,
-% \', \begin, \ifnum, \raggedright,
-% \\, \bfseries, \ifx, \raisebox,
-% \^, \cmidrule, \ignorespaces, \rule,
-% \`, \colorbox, \immediate, \scriptsize,
-% \@auxout, \def, \includegraphics, \scshape,
-% \AtBeginDocument, \define@key, \lastpage@putlabel,\selectlanguage,
-% \AtEndDocument, \definecolor, \let, \setbox,
-% \CurrentOption, \else, \long, \setkeys,
-% \DeclareOption, \empty, \multicolumn, \sffamily,
-% \DescribeMacro, \end, \newcount, \space,
-% \EUR, \enspace, \newdimen, \tbfigures,
-% \LARGE, \fancyhead, \newif, \textbf,
-% \Large, \fancyhf, \newlabel, \textbullet,
-% \LoadClass, \fi, \noindent, \thepage,
-% \ML, \footnotesize,\number, \thispagestyle,
-% \NN, \geometry, \or, \undefined,
-% \PassOptionsToClass,\hfill, \pageref, \unskip,
-% \ProcessOptions, \hsize, \pagestyle, \vbox,
-% \RequirePackage, \hspace, \parindent, \vfill,
-% \TPGrid, \ht, \pdfinfo, \vspace,
-% \addtocounter, \if@twoside, \pdfprotrudechars, \write,
-% \advance, \ifcase, \qquad, \string,
-% \rightskip, \fileversion, \filedat, \clearpage,
-% \parskip
+% \ , \", \', \@auxout, \AtBeginDocument, \AtEndDocument, \Cbox, \CurrentOption,
+% \DeclareOption, \DescribeMacro, \EUR, \LARGE, \Large, \LoadClass, \ML, \NN,
+% \PassOptionsToClass, \ProcessOptions, \RequirePackage, \TPGrid, \Tbox, \\, \^,
+% \`, \aa, \addtocounter, \advance, \barsep, \baselineskip, \begin, \bfseries,
+% \bgroup, \clearpage, \cmidrule, \colorbox, \csname, \def, \define@key,
+% \definecolor, \egroup, \else, \empty, \end, \endcsname, \enspace,
+% \expandafter, \fancyhead, \fancyhf, \fi, \filedat, \fileversion,
+% \footnotesize, \geometry, \hfill, \hsize, \hspace, \ht, \if@twoside,
+% \ifcase, \ifdim, \ifnum, \ifx, \ignorespaces, \immediate, \includegraphics,
+% \lastpage@putlabel, \let, \long, \multicolumn, \newcommand, \newcount,
+% \newdimen, \newenvironment, \newif, \newlabel, \noindent, \number, \o, \or,
+% \pageref, \pagestyle, \paperheight, \paperwidth, \par, \parindent, \parskip,
+% \pdfinfo, \pdfprotrudechars, \qquad, \quad, \raggedright, \raisebox, \relax,
+% \rightskip, \rule, \scriptsize, \scshape, \selectlanguage, \setbox,
+% \setcounter, \setkeys, \sffamily, \space, \string, \tbfigures, \textbf,
+% \textbullet, \thepage, \thispagestyle, \undefined, \unskip, \usepackage,
+% \vbox, \vfill, \vspace, \write
% }
-% \GetFileInfo{isodoc.dtx}
%
-% \DoNotIndex{\newcommand,\newenvironment}
+% \GetFileInfo{isodoc.dtx}
%
% \title{The \textsf{isodoc} class\thanks{This document
% corresponds to \textsf{isodoc}~\fileversion, dated \filedate.}\\for
@@ -194,7 +187,7 @@
% definitions, either in the document or
% in a style file. The latter is indicated for definitions that don't vary on a
% per document basis, such as your company name, address, email address and so
-% on. Thus if you run a company and are the secretary of a club,
+% on. Thus if you run a company and also are the secretary of a club,
% you would have style files for each of them, plus one for your private letters
% or invoices.\footnote{If you archive your documents in their source form
% only, it may be wise to work without a style file and set all options in the
@@ -228,23 +221,24 @@
%
% Options are given as key=value pairs, separated by comma's.
% Extra comma's, including one behind the last pair, don't hurt.
-% Arguments to option should be put between braces if they contain
+% An option argument should be enclosed in braces if it contains
% comma's or equals signs.
%
% As shown in the two examples in the previous section, there are three commands
% that can set options: |\setupdocument|, |\letter|, and |\invoice|.
% These commands will be further explained in the \textsl{Commands} section.
% |\setupdocument| is normally used to set options that are common to all
-% letters of invoices in the document, like your company data; |\letter|, and
-% |\invoice| set only those options that are different for each letter or
-% invoice, like the |to| and |opening| options.
+% letters or invoices in the document, like your company data; the optional
+% arguments of |\letter| and |\invoice| set only those options
+% that are different for each letter or invoice, such as the |to|
+% and |opening| options.
%
% This section lists and explains all available options.
% All options can be used in both the style files and in the document
% source, although several will normally only be used in style files (such as
% |company|) and some only in the document source (such as |to| or |opening|).
%
-% \OPTS{Language}{Currently five languages are defined. As I am not particularly
+% \OPTS{Language}{Currently only a few languages are defined. As I am not particularly
% strong in the translation of administrative terminology, please feel free to
% send me corrections. And if you don't find your own language here, please send
% me your translations and your language will be added. The keywords below set
@@ -253,6 +247,7 @@
% \T{english} & English,\NN
% \T{german} & German,\NN
% \T{american} & American,\NN
+% \T{norwegian} & Norwegian,\NN
% \T{french} & or French.\NN
% \T{foreign} & Use this key if you send your letter to a foreign
% country. With it, your country will be added to
@@ -300,7 +295,7 @@
% \T{leftaddress} & Places the window over columns 2 and 3; this is the
% default.\NN
% \T{rightaddress} & Places the window over columns 4 and 5.\NN
-% \T{addresscenter = ...} & Distance in mm of the center of the window from the top of the
+% \T{addresscenter = ...} & Distance in mm of the center of the window from the top of the
% paper; the default value is 63.5 mm, fitting for a DL
% envelope for triple folded A4 (110x220mm) with a window
% at 50 mm from the top, 30mm high.\footnote{The middle of
@@ -308,11 +303,8 @@
% envelope; the paper is folded (see the folding options
% below) to give the folded paper a tolerance of 1.5mm on
% both sides in the envelope, so the address should be
-% placed 1.5 mm higher at 65-1.5=63.5 mm.} Use
-% \T{addresscenter} \textsl{after} \T{fold}, \T{fold2} or \T{fold3},
-% because the definition of the folding marks also puts
-% the window positions at their corresponding
-% defaults.\NN
+% placed 1.5 mm higher at 65-1.5=63.5 mm.}\NN
+% \T{addresswidth = ...}& The address window's width. The default is 70 mm (2 columns).\NN
% \T{to = ...} & The addressee's address. New lines can be introduced with the \C{}\C{}
% command; lines longer than 70 mm will cause extra
% newlines.\NN\relax
@@ -329,9 +321,46 @@
% window. Or you may want to define a completely
% different return address. With the \T{returnaddress} keyword you can
% redefine the return address. Use \C{}\C{} to insert
-% bullets. \NN
+% bullets.\NN
+% }
+%
+% \OPTS{Header fields}{Under the address window, a header is printed. The
+% page is vertically divided in six columns, one each for the left and right
+% margins, and four which, in the header,
+% say: \textsl{Your letter of}, \textsl{Your reference}, \textsl{Our reference},
+% and \textsl{Date}, each with their respective contents under them. If the
+% \T{subject} keyword is used, an extra line starting with \textsl{Subject:} will
+% appear, followed by the contents on the same line and over a width of 2.5
+% columns. If needed, extra lines will be used.}{
+% \T{bodyshift = ...} & The header starts 98mm from the top of the paper,
+% but it can be shifted with the |bodyshift| option.\NN
+% \T{[no]header} & The |noheader| option disables all header fields, the
+% |header| option re-enables them (|header| is the default.)\NN
+% \T{yourletter = ...} & first field in the header: the date of the letter
+% this document is reaction on; empty by default.\NN
+% \T{yourref = ...} & second field in the header: addressee's reference of the letter
+% this document is reaction on; empty by default.\NN
+% \T{ourref = ...} & third field in the header: your own reference for
+% this document.\NN
+% \T{date = ...} & fourth field of the header. The argument must
+% have the form \T{yyyymmdd} or \T{yyyy-mm-dd}; it will
+% be translated into a date like ``May 3, 2006'' if the
+% document language is English, or into its translation
+% in the actual language. The default value is
+% `Undefined date', i.e.\ the date of \C{today} is not
+% the default as this would make the date untraceable
+% from the document source only. However, you can force
+% the use of \C{today} by providing the string |today|
+% for the argument.\NN
+% \T{forcedate = ...} & The restrictions of the |date| option can be overridden by
+% using the |forcedate| option instead; you can thus enter
+% anything you like for the date.\NN
+% \T{subject = ...} & subject of this document; is placed under the other fields,
+% over the width of the first, second and half of the
+% third fields.\NN
% }
%
+% \pagebreak %%%
% \OPTS{Opening and Closing}{A letter is started with an opening -- something
% like `Dear John', and ended with a closing -- something like
% `Regards,\T{<newline>}Betty', perhaps with an autograph (or white space) in between.}{
@@ -364,45 +393,19 @@
% default is \T{2}\C{baselineskip}.
% }
%
-% \OPTS{Headline fields}{Under the address window, a headline is printed. The
-% page is vertically divided in six columns, one each for the left and right
-% margins, and four which, in the headline,
-% say: \textsl{Your letter of}, \textsl{Your reference}, \textsl{Our reference},
-% and \textsl{Date}, each with their respective contents under them. If the
-% \T{subject} keyword is used, an extra line starting with \textsl{Subject:} will
-% appear, followed by the contents on the same line and over a width of 2.5
-% columns. If needed, extra lines will be used.}{
-% \T{yourletter = ...} & first field in the headline: the date of the letter
-% this document is reaction on; empty by default.\NN
-% \T{yourref = ...} & second field in the headline: addressee's reference of the letter
-% this document is reaction on; empty by default.\NN
-% \T{ourref = ...} & third field in the headline: your own reference for
-% this document.\NN
-% \T{date = ...} & fourth field of the headline; the default is `Undefined
-% date', i.e.\ the date of \C{today} is not the default
-% as this would make the date untraceable from the document
-% source only. The argument of the \T{date} option must
-% have the form \T{yyyymmdd}; it will be translated into a
-% date like ``May 3, 2006'' if the document language is
-% English, or into its translation in the actual language.\NN
-% \T{subject = ...} & subject of this document; is placed under the headline,
-% over the width of the first, second and half of the
-% third fields.\NN
-% }
-%
% \OPTS{Footer fields}{Footer fields are shown in the order in which
% they appear below; they are empty by default, and empty
% fields are not displayed.}{
% \T{[no]footer} & enables or disables printing a page footer; there is room
% for upto four fields, if you set five fields, the last
% one will appear in the right margin.\NN
+% \T{phoneprefix} & prefix for phone numbers. The default is `0'; will be changed
+% into `+$<$areacode$>$-' if the \T{foreign} option is used.\NN
% \T{phone = ...} & if not empty, prints `phone' in the first field of the
% page footer, with the contents under it, prefixed with a~0 or,
% if the \T{foreign} option was used, the areacode (set with the
% \T{areacode} option.) Telephone numbers should thus be entered
% without a prefix.\NN
-% \T{phoneprefix} & prefix for phone numbers. The default is `0'; will be changed
-% into `+<areacode>-' if the \T{foreign} option is used.\NN
% \T{cellphone = ...} & same for cellphone...\NN
% \T{fax = ...} & fax...\NN
% \T{email = ...} & email...\NN
@@ -414,6 +417,8 @@
% parts of the address to become invisible because of the letter loosely filling
% the envelope.}{
% \T{nofold} & Disable folding marks.\NN
+% \T{foldleft} & The folding mark is printed in the left margin.\NN
+% \T{foldright} & The folding mark is printed in the right margin. This is the default.\NN
% \T{fold2} & Folding mark at about halfway, set for tight fitting
% into a 220x162 mm envelope, with a tolerance of 2 mm
% at both sides.\NN
@@ -455,8 +460,7 @@
% \T{acceptreference = ...} & Reference\NN
% }
%
-% \OPTS{Miscellaneous}{Normally, texts in letters are set ragged right. This can
-% be changed with the following keywords:}{
+% \OPTS{Miscellaneous}{}{
% \T{[no]fill} & Use the \T{fill} keyword to justify text both left and
% right; the default is \T{nofill}: left justification
% only.\NN
@@ -464,7 +468,7 @@
% but with the \T{fontpackage} keyword you can select another
% package, like \T{txfonts} or \T{osf-txfonts}.\NN
% \T{shift = ...} & The many textpositions in isodoc are defined in millimeters,
-% but sometime printers show an aberration in their horizontal
+% but sometimes printers show an aberration in their horizontal
% or vertical printing position. You can correct for this with the
% \T{shift = x,y} option, where x and y (both 0 by default) shift
% the output to the right and down, respectively, in millimeters.\NN
@@ -490,21 +494,21 @@
% Although not very often, it may sometimes be useful to have those
% commands available. These are the options with a corresponding
% command:\footnote{Note for developers: the table lines below can be
-% generated with a ruby script listkeys (included at the end of isodoc.dtx):
-% |listkeys isodoc.dtx show|}
+% generated with a ruby script listkeys (included in the distribution):
+% |listkeys show|}
%
% \noindent\begin{tabular}{@{}lllll@{}}
-% accept &areacode &email &phoneprefix &yourletter \NN
-% acceptaccount &autograph &enclosures &returnaddress &yourref \NN
-% acceptaddress &bic &fax &rightaddress &zip \NN
-% acceptcents &cellphone &fontpackage &routingno & \NN
-% acceptdesc &chamber &iban &signature & \NN
-% acceptdescription &city &leftaddress &street & \NN
-% accepteuros &closing &logoaddress &subject & \NN
-% acceptreference &company &opening &term & \NN
-% accountname &country &openingcomma &vatno & \NN
-% accountno &countrycode &ourref &website & \NN
-% addresscenter &currency &phone &who & \NN
+% accept &addresswidth &currency &ourref &website \NN
+% acceptaccount &areacode &email &phone &who \NN
+% acceptaddress &autograph &enclosures &phoneprefix &yourletter \NN
+% acceptcents &bic &fax &returnaddress &yourref \NN
+% acceptdesc &cellphone &fontpackage &rightaddress &zip \NN
+% acceptdescription &chamber &forcedate &routingno & \NN
+% accepteuros &city &iban &signature & \NN
+% acceptreference &closing &leftaddress &street & \NN
+% accountname &company &logoaddress &subject & \NN
+% accountno &country &opening &term & \NN
+% addresscenter &countrycode &openingcomma &vatno & \NN
% \end{tabular}
%
% \noindent So you could write in your letter: ``please send me the money on my bank
@@ -560,7 +564,7 @@
%
% \DescribeMacro{\itotal}
% The |\itotal{amount}| command (|itotal| stands for Invoice total) is
-% equivalent to writing\\
+% equivalent to writing:
% |\cmidrule[.05em]{2-2} Total & amount \NN|, with the additional
% advantage that the word `Total' will be replaced with its equivalent
% in the current language. Thus, the argument to the |\itable|
@@ -615,7 +619,8 @@
%
% \section{Usage: letters}
%
-% Usage of the class is best explained with an example.
+% Usage of the class is best explained by example.
+% \subsection{A simple letter}
% Here is the latex source for a small letter; its result appears in figure~\ref{letter1}:
% \verbinput{letter.txt}
% This source essentially shows three items:
@@ -649,8 +654,8 @@
% compiles to the letter shown in figure~\ref{letter1}.
% This example illustrates some aspects of isodoc:
% \begin{compactitem}
-% \item At the top, you see the default letterhead (logo). The
-% |\renewcommand{\logo}{...}| command can be used to create your own logo.
+% \item At the top, you see the default letterhead (logo). You can create your
+% own logo by redefining the |\logo| command.
% \item Under it is the address. It has a return address in script sized sans
% serif boldface over
% it, because the |return| key has been used. A return address is useful if you
@@ -682,7 +687,8 @@
% using the |footer| key, depending on the default set in the style file.
% \end{compactitem}
%
-% Let's try another illustrative example, seee figures~\ref{logo1}
+% \subsection{Multiple letters, redefined logo}
+% Let's try another illustrative example, see figures~\ref{logo1}
% and~\ref{logo2}: we use a modified style file, with a
% redefined logo, so we don't need a page footer; we use preprinted right-windowed
% envelopes, so a return address is not needed. Here is the style file
@@ -702,6 +708,7 @@
% first letter) of this document, which actually has four pages.
%
% \section{Usage: invoices}
+% \subsection{A simple invoice}
% \FIG{accept}{accept}{Invoice example with accept form}
%
% Invoices (can) have the same structure as letters, except that the |\opening|
@@ -714,6 +721,7 @@
% \verbinput{invoice.txt}
% The result is shown in figure~\ref{invoice}.
%
+% \subsection{Invoice with redefined logo}
% When the |accept| option is used, the invoice will be created with an invoice
% form on the lower third part of the page. Here is an example:
% \verbinput{accept.txt}
@@ -732,12 +740,12 @@
\ProcessOptions
\LoadClass{article}
% \end{macrocode}
-% We don't use |\ctable| floats here, but we need |ctable|'s commands for decent
+% We use |\ctable| floats here, and we need |ctable|'s commands for decent
% spacing in tables and more. |ctable| also brings us |array|, |tabularx|,
-% |color|, and |xkeyval|. |marvosym| is used for the euro symbol.
+% |color|, and |xkeyval|. |eurosym| is used for the euro symbol.
% \begin{macrocode}
-\RequirePackage{ctable,marvosym,graphicx}
-\RequirePackage[dutch,german,french,american,english]{babel}
+\RequirePackage{ctable,eurosym,graphicx,stringstrings}
+\RequirePackage[dutch,norsk,german,frenchb,american,english]{babel}
% \end{macrocode}
%
% Since the name of the package contains 'iso', make the page A4.
@@ -749,10 +757,23 @@
% purposes.
%
% \begin{macrocode}
-\RequirePackage[a4paper,margin=35mm,head=\baselineskip]{geometry}
+\RequirePackage[a4paper,margin=35mm,nofoot,head=\baselineskip]{geometry}
\RequirePackage[absolute,overlay]{textpos}
\ifdim\paperwidth>\paperheight\TPGrid{297}{210}\else\TPGrid{210}{297}\fi
% \end{macrocode}
+% Several colors can be changed, by using the |\definecolor| command;
+% the defaults (all black) are set here:\\
+% \DescribeMacro{headcolor}
+% \texttt{headcolor:} color for the header and footer field texts\\
+% \DescribeMacro{headingcolor}
+% \texttt{headingcolor:} color for the fancy headings\\
+% \DescribeMacro{markercolor}
+% \texttt{markercolor:} color for the folding marks
+% \begin{macrocode}
+\definecolor{headcolor}{gray}{0}
+\definecolor{headingcolor}{gray}{0}
+\definecolor{markercolor}{gray}{0}
+% \end{macrocode}
%
% Use fancy headings, except for the first page.
% The heading, on a rule, looks like:\\[2ex]
@@ -762,11 +783,15 @@
\pagestyle{fancy}
\fancyhf{}
\if@twoside
- \fancyhead[LE,RO]{\pagetext\ \thepage\ \oftext{} \pageref{LastPageOf\thelettercount}}
- \fancyhead[RE,LO]{\totext: \toname\ (\date)}
+ \fancyhead[LE,RO]{\color{headingcolor}%
+ \pagetext\ \thepage\ \oftext{} \pageref{LastPageOf\thelettercount}}
+ \fancyhead[RE,LO]{\color{headingcolor}%
+ \totext: \toname\ (\date)}
\else
- \fancyhead[L]{\totext: \toname\ (\date)}
- \fancyhead[R]{\pagetext\ \thepage\ \oftext{} \pageref{LastPageOf\thelettercount}}
+ \fancyhead[L]{\color{headingcolor}%
+ \totext: \toname\ (\date)}
+ \fancyhead[R]{\color{headingcolor}%
+ \pagetext\ \thepage\ \oftext{} \pageref{LastPageOf\thelettercount}}
\fi
% \end{macrocode}
% The |\xxxdoc| commands (like |\dutchdoc|) set the default language via
@@ -787,20 +812,20 @@
% sender's address information. The idea is that this is used for all
% pre-printed text on the letter paper.
% \begin{macrocode}
-\def\@hft{\footnotesize\sffamily}
+\def\@hft{\footnotesize\sffamily\color{headcolor}}
% \end{macrocode}
% \subsection{The options and their defaults}
% \subsubsection{General options}
% The default font is latin modern (using the |lmodern| package).
-% The |fontpackage| option can be used to select another font.
% \DescribeMacro{fontpackage}
+% The |fontpackage| option can be used to select another font.
% \begin{macrocode}
\define@key{isodoc}{fontpackage}{\def\fontpackage{#1}}
\def\fontpackage{lmodern}
% \end{macrocode}
-% The default shift is 0mm,0mm
-% The |shift| option moves the output to the right and down:
+% The default shift is 0mm,0mm.
% \DescribeMacro{shift}
+% The |shift| option moves the output to the right and down:
% \begin{macrocode}
\def\@xyshift#1,#2@@@{\def\@xshift{#1}\def\@yshift{#2}}
\define@key{isodoc}{shift}{%
@@ -819,13 +844,14 @@
\define@key{isodoc}{localbank}[\localbanktrue]{\localbanktrue}
\newif\iflocalbank\localbankfalse
% \end{macrocode}
-% The following keys set the language; English, set at the |\EndOfClass| is the
-% default.
% \DescribeMacro{dutch}
% \DescribeMacro{english}
% \DescribeMacro{german}
% \DescribeMacro{american}
% \DescribeMacro{french}
+% \DescribeMacro{norwegian}
+% The following keys set the language; English, set at the |\EndOfClass| is the
+% default.
% \begin{macrocode}
\define@key{isodoc}{dutch} []{\dutchdoc}
\define@key{isodoc}{english} []{\englishdoc}
@@ -833,21 +859,18 @@
\define@key{isodoc}{german} []{\germandoc}
\define@key{isodoc}{american}[]{\americandoc}
\define@key{isodoc}{french} []{\frenchdoc}
+\define@key{isodoc}{norwegian} []{\norwegiandoc}
% \end{macrocode}
-% The default is to have left, but not right justification, allowing for hyphenation
-% in extreme cases:
% \DescribeMacro{fill}
% \DescribeMacro{nofill}
+% The default is to have left, but not right justification, allowing for hyphenation
+% in extreme cases:
% \begin{macrocode}
\define@key{isodoc}{fill} []{\rightskip=1\rightskip}
\define@key{isodoc}{nofill}[]{\rightskip=0mm plus 35mm}
\rightskip=0mm plus 35mm
% \end{macrocode}
% \subsubsection{Logo}
-% The logo, by default, consists of a large company or personal name on top a
-% rule, with a contact person's name (probably your own name) and address
-% hanging under the rule.
-% Its contents are defined by the following options:
% \DescribeMacro{company}
% \DescribeMacro{logoaddress}
% \DescribeMacro{who}
@@ -856,6 +879,10 @@
% \DescribeMacro{zip}
% \DescribeMacro{country}
% \DescribeMacro{countrycode}
+% The logo, by default, consists of a large company or personal name on top a
+% rule, with a contact person's name (probably your own name) and address
+% hanging under the rule.
+% Its contents are defined by the following options:
% \begin{macrocode}
\define@key{isodoc}{company} {\def\company{#1}}
\def\company{\Undefined{company}}
@@ -875,6 +902,10 @@
\def\prezip{\ifforeign\countrycode\else\fi}
% \end{macrocode}
% \subsubsection{Address window}
+% \DescribeMacro{leftaddress}
+% \DescribeMacro{rightaddress}
+% \DescribeMacro{addresscenter}
+% \DescribeMacro{addresswidth}
% The address can be positioned vertically with the |addresscenter| option; the
% default is 63.5mm. This is the vertical position of the center of the address.
% Horizontally, the address is positioned either left or right, depending on the
@@ -882,16 +913,16 @@
% address start at x=35mm, which is the left margin (the default), and thus in
% line with the first header field, in the second case at 105mm, in line with
% the one-but-last header field.
-% \DescribeMacro{leftaddress}
-% \DescribeMacro{rightaddress}
-% \DescribeMacro{addresscenter}
% \begin{macrocode}
\define@key{isodoc}{leftaddress} []{\def\xaddress{35}}
\def\xaddress{35}
\define@key{isodoc}{rightaddress}[]{\def\xaddress{105}}
\define@key{isodoc}{addresscenter} {\def\addresscenter{#1}}
\def\addresscenter{63.5}
+\define@key{isodoc}{addresswidth} {\def\addresswidth{#1}}
+ \def\addresswidth{70}
% \end{macrocode}
+% \DescribeMacro{to}
% The |to| option takes the addressee's address lines. Use |\\| to
% separate lines. The info will be split by |\processto| on the first
% |\\| separator into the addressee's name (|\toname|) and his address
@@ -902,7 +933,6 @@
% |\letter| or |\invoice| commands and thus is not seen by the |\hypersetup|,
% which is called |\AtBeginDocument|; so set the defaults to
% |Various people| for the |\toname| and make the address undefined:
-% \DescribeMacro{to}
% \begin{macrocode}
\define@key{isodoc}{to}{\processto{#1}}\def\toname{Various people}
\def\toaddress{\Undefined{to}}
@@ -911,31 +941,59 @@
\long\def\xproc #1\\#2@@@{\def\toname{#1}\def\toaddress{#2}}
\long\def\yproc #1\\#2@@@{\def\toaddress{#2}}
% \end{macrocode}
+% \DescribeMacro{return}
+% \DescribeMacro{noreturn}
+% \DescribeMacro{returnaddress}
% The default is to have no return address; but this can be changed by using
% the |return| (either in the style file or in the source) or, if the default
% was changed in the style file, remove it with |noreturn| in the source.
% Company and country names are often too long to fit in the address window. Or
% you may want to define an entirely different return address. The
% |returnaddress| option is provided to redefine the return address:
-% \DescribeMacro{return}
-% \DescribeMacro{noreturn}
-% \DescribeMacro{returnaddress}
% \begin{macrocode}
\define@key{isodoc}{return} []{\returntrue}
\newif\ifreturn\returnfalse
\define@key{isodoc}{noreturn} []{\returnfalse}
\define@key{isodoc}{returnaddress}{\def\returnaddress{#1}}
% \end{macrocode}
-% \subsubsection{Page footer}
-% A footer is switched on or off with the |footer| and |nofooter| options.
-% The default is the have no page footer.
+%
+% \subsubsection{Header}
+% \DescribeMacro{header}
+% \DescribeMacro{noheader}
+% A header is switched on or off with the |header| and |noheader| options.
+% The default is to have a header.
+% \begin{macrocode}
+\define@key{isodoc}{header} []{\headertrue}
+ \newif\ifheader\headertrue
+\define@key{isodoc}{noheader}[]{\headerfalse}
+% \end{macrocode}
+% \DescribeMacro{bodyshift}
+% The header is the start of the body. It is initially positioned
+% at 98mm from the top of the paper, but it can be shifted with
+% the |bodyshift| option.
+% \begin{macrocode}
+\define@key{isodoc}{bodyshift} {\advance\headerpos#1\advance\bodyskip#1mm}
+ \newdimen\bodyskip\bodyskip=0mm
+\newcount\headerpos\headerpos=98
+% \end{macrocode}
+%
+% \subsubsection{Footer}
% \DescribeMacro{footer}
% \DescribeMacro{nofooter}
+% A footer is switched on or off with the |footer| and |nofooter| options.
+% The default is the have no footer.
% \begin{macrocode}
\define@key{isodoc}{footer} []{\footertrue}
\newif\iffooter\footerfalse
\define@key{isodoc}{nofooter}[]{\footerfalse}
% \end{macrocode}
+% \DescribeMacro{areacode}
+% \DescribeMacro{phone}
+% \DescribeMacro{phoneprefix}
+% \DescribeMacro{cellphone}
+% \DescribeMacro{fax}
+% \DescribeMacro{website}
+% \DescribeMacro{email}
% If there \textsl{is} a page footer, only those fields will be displayed which are not empty.
% Currently the |phone|, |cellphone|, |fax|, |email| and |website| are
% recognised as possible footer fields. Phone and fax number will be prefixed
@@ -960,31 +1018,41 @@
\def\lead{\ifforeign+\areacode-\else\phoneprefix\fi}
% \end{macrocode}
% \subsubsection{Folding mark}
+% \DescribeMacro{nofold}
% The default is to have no folding mark. So start with the folding mark
% position outside the paper boundaries:
-% \DescribeMacro{nofold}
% \begin{macrocode}
\define@key{isodoc}{nofold}[]{\yfold=-1mm}
\newdimen\yfold\yfold=-1mm
% \end{macrocode}
+% \DescribeMacro{foldleft}
+% \DescribeMacro{foldright}
+% The folding mark is in the right margin, but it can be moved to the left
+% margin with the |foldleft| option, or, if made that the default in your style
+% file, back to the right margin with the |foldright| option:
+% \begin{macrocode}
+\define@key{isodoc}{foldleft}[]{\xfold=9mm}
+ \newdimen\xfold\xfold=201mm
+\define@key{isodoc}{foldright}[]{\xfold=201mm}
+% \end{macrocode}
+% \DescribeMacro{fold2}
% The envelope for double folded A4 is C5: 162x220mm,
% window 40x110mm, upper left corner at 20x50mm.
% Fold the A4 to have a tolerance of 2mm at top and bottom, by
% putting the fold mark at 162-4=158 mm.
-% \DescribeMacro{fold2}
% \begin{macrocode}
\define@key{isodoc}{fold2}[]{\yfold=158mm}
% \end{macrocode}
+% \DescribeMacro{fold3}
% The envelope for triple folded A4 is DL: 110x220mm,
% Fold the A4 to have a tolerance of 1.5mm at top and bottom, by
% putting the fold mark at 110-3=107mm.
-% \DescribeMacro{fold3}
% \begin{macrocode}
\define@key{isodoc}{fold3}[]{\yfold=107mm}
% \end{macrocode}
+% \DescribeMacro{fold}
% For non-standard envelopes and paper formats the position of the
% folding mark can be set at any position (in mm) from the top of the paper:
-% \DescribeMacro{fold}
% \begin{macrocode}
\define@key{isodoc}{fold}{\yfold=#1mm}
% \end{macrocode}
@@ -992,6 +1060,7 @@
% \subsubsection{Header fields}
% There are four header fields, each one quarter of the textwidth wide.
% Under those, if the subject has been defined, a subject line.
+% The header position is 98mm by default, but it can be shifted with the |bodyshift| option.
% \DescribeMacro{ourref}
% \DescribeMacro{yourref}
% \DescribeMacro{yourletter}
@@ -1003,83 +1072,87 @@
\define@key{isodoc}{yourletter}{\def\yourletter{#1}}
\def\yourletter{}
% \end{macrocode}
-% The date must be entered in yyyymmdd format; here we check that it
-% contains exactly 8 digits (thanks Taco Hoekwater, Piet van Oostrum)
% \DescribeMacro{date}
-% \DescribeMacro{subject}
+% The date must be entered in either of three formats: yyyy-mm-dd, yyyymmdd
+% or the string |today|. Here we check that a correct format is offered and
+% that the values for |mm| and |dd| are in the range 1--12 and 1--31 respectively.
+% The string |today| sets the date to today's date.
% \begin{macrocode}
-\define@key{isodoc}{date}{\setdate{#1}}
+\define@key{isodoc}{date}{\@isomakedate{#1}}
\def\date{\Undefined{date}}
+% \end{macrocode}
+% \DescribeMacro{forcedate}
+% If you know what you do you can substitute anything you like for the date by
+% using the |forcedate| option instead of |date|:
+% \begin{macrocode}
+\define@key{isodoc}{forcedate}{\def\forcedate{#1}}\def\forcedate{}
+% \end{macrocode}
+% \DescribeMacro{subject}
+% The subject is empty by default and will be typeset.
+% \begin{macrocode}
\define@key{isodoc}{subject}{\def\subject{#1}}
\def\subject{}
-\def\checkdigit#1{%
- \ifcase0\ifcase1#1\or\or\or\or\or\or\or\or\or\else1\fi
- \ClassError{test}{non-digit-character (#1) in date}{}
- \fi
-}
-\def\newdate#1#2#3#4#5#6#7#8#9\wybo{%
- \checkdigit{#1}\checkdigit{#2}\checkdigit{#3}\checkdigit{#4}
- \checkdigit{#5}\checkdigit{#6}\checkdigit{#7}\checkdigit{#8}
- \ifx\relax#9\relax
- \year=#1#2#3#4\month=#5#6\day=#7#8
- \ifnum \month > 12 \ClassError{isodoc}{Illegal date }{}\fi
- \ifnum \day > 31 \ClassError{isodoc}{Illegal date }{}\fi
- \else
- \ClassError{isodoc}{Date must have exactly 8 digits}{}
- \fi
-}
-\def\wybo{}
-\def\setdate#1{\newdate #1\wybo\wybo\wybo\wybo\wybo\wybo\wybo\wybo\wybo}
% \end{macrocode}
+% \DescribeMacro{opening}
+% \DescribeMacro{openingcomma}
% The opening, something like `Dear Reader', is set by the |opening| option; the
% default is `Undefined opening'. It is followed by a comma, unless the
% |openingcomma| has been used to set it to a different character, like a
% semicolon or an exclamation mark.
-% \DescribeMacro{opening}
-% \DescribeMacro{openingcomma}
% \begin{macrocode}
+\newcount\openingpos
\define@key{isodoc}{opening} {\def\opening{#1}}
\def\openingcomma{,}
\define@key{isodoc}{openingcomma}{\def\openingcomma{#1}}
\def\opening{\Undefined{opening}}
% \end{macrocode}
% \subsubsection{Closing, autograph, signature}
+% \DescribeMacro{closing}
+% \DescribeMacro{closingskip}
% The closing, something like `Best regards', is set by the |closing| option;
% the default is `Undefined closing'. It will be preceded by a vertical skip,
% which can be set by the |closingskip| option, which is |2\baselineskip| by
% default:
-% \DescribeMacro{closing}
-% \DescribeMacro{closingskip}
% \begin{macrocode}
\define@key{isodoc}{closing} {\def\closing{#1,}}
- \def\closing{\Undefined{closing}} % Best regards,
+ \def\closing{\Undefined{closing}} % Best regards,
\define@key{isodoc}{closingskip}{\closingskip=#1}
\newdimen\closingskip\closingskip=2\baselineskip
% \end{macrocode}
+% \DescribeMacro{autograph}
% The autograph is either just a newline, or a vertical spacing where you can
% put your autograph manually, or a graphic. In the latter case, is must have
% been defined with the macro |\autograph|, which defines an autograph from an
% image, see the section \textsl{User Macros}.
% Not using the |autograph| option is equivalent to |autograph=0| (just a newline).
% Using it without a value is equivalent to |autograph=2| (image inserted):
-% \DescribeMacro{autograph}
% \begin{macrocode}
\define@key{isodoc}{autograph}[2]{\def\autographversion{#1}}
\def\autographversion{0}
% \end{macrocode}
+% \DescribeMacro{signature}
% The signature, something like `John Letterwriter', is set by the |signature| option;
% the default is `Undefined signature'.
-% \DescribeMacro{signature}
% \begin{macrocode}
\define@key{isodoc}{signature}{\def\signature{#1}}
\def\signature{\Undefined{signature}}
% \end{macrocode}
+% \DescribeMacro{enclosures}
% Enclosures are set by the |enclosures| option. There are none by default.
% \begin{macrocode}
\define@key{isodoc}{enclosures} {\def\enclosures{#1}}
\def\enclosures{}
% \end{macrocode}
% \subsubsection{Invoice specific data}
+% \DescribeMacro{term}
+% \DescribeMacro{accountno}
+% \DescribeMacro{routingno}
+% \DescribeMacro{accountname}
+% \DescribeMacro{iban}
+% \DescribeMacro{bic}
+% \DescribeMacro{vatno}
+% \DescribeMacro{chamber}
+% \DescribeMacro{currency}
% Invoices need to state some specific data, like account data and term of
% payment:
% \begin{macrocode}
@@ -1095,6 +1168,14 @@
\define@key{isodoc}{currency} {\def\currency{#1}}
\def\currency{\EUR}
% \end{macrocode}
+% \DescribeMacro{accept}
+% \DescribeMacro{acceptaccount}
+% \DescribeMacro{acceptaddress}
+% \DescribeMacro{acceptcents}
+% \DescribeMacro{acceptdescription}
+% \DescribeMacro{acceptdesc}
+% \DescribeMacro{accepteuros}
+% \DescribeMacro{acceptreference}
% If an accept form is to be printed, here are the options to fill in all the
% fields:
% \begin{macrocode}
@@ -1120,6 +1201,7 @@
% other forms become available, the content of |\accepttype| will have to be
% checked. Here is a rough layout of the E05 accept form -- the last character
% tells if the items are tyepset in a Tbox (T) or in a Cbox (C):
+% \pagebreak%%%
% \begin{verbatim}
% description T
% ref description T
@@ -1209,7 +1291,7 @@
\end{textblock}
}
\Tbox{140}{22}{35}{\noindent
- \@hft
+ \footnotesize\sffamily
\ifx\undefined\logoaddress%
\ifx\undefined\tbfigures\else\tbfigures\fi
\ifx\who\empty\else\who\\\fi
@@ -1239,6 +1321,42 @@
\RequirePackage{\fontpackage}\pdfprotrudechars=1
}
% \end{macrocode}
+% \DescribeMacro{\@isomakedate}
+% \begin{macrocode}
+\newcount\@isoyear \@isoyear=\year \year=0
+\newcount\@isomonth \@isomonth=\month
+\newcount\@isoday \@isoday=\day
+\def\@isomakedate#1{%
+ \def\@isoarg{#1}\def\@isotoday{today}
+ \ifx\@isoarg\@isotoday
+ \year=\@isoyear
+ \month=\@isomonth
+ \day=\@isoday
+ \else
+ \stringlength[q]{\@isoarg}
+ \ifnum\theresult=10
+ \substring[q]{\@isoarg}{5}{5}
+ \if\thestring-\else\ClassError{isodoc}{
+ Illegal date separator: \thestring (must be -)}{}\fi
+ \substring[q]{\@isoarg}{8}{8}
+ \if\thestring-\else\ClassError{isodoc}{
+ Illegal date separator: \thestring (must be -)}{}\fi
+ \else
+ \ifnum\theresult=8\else\ClassError{isodoc}{
+ Illegal date: not yyyymmdd | yyyy-mm-dd | today}{}\fi
+ \fi
+ \Treatments{0}{0}{0}{1}{0}{0}
+ \substring[q]{\@isoarg}{1}{$} \let\@isodigits=\thestring \def\@isoarg{\thestring}
+ \stringlength[q]{\@isodigits}
+ \ifnum\theresult=8\else\ClassError{isodoc}{Illegal date: must have 8 digits}{}\fi
+ \substring[q]{\@isoarg}{1}{4} \year=\thestring \def\@isoarg{\@isodigits}
+ \substring[q]{\@isoarg}{5}{6} \month=\thestring \def\@isoarg{\@isodigits}
+ \substring[q]{\@isoarg}{7}{8} \day=\thestring \def\@isoarg{\@isodigits}
+ \ifnum \month > 12 \ClassError{isodoc}{Illegal date: month>12}{}\fi
+ \ifnum \day > 31 \ClassError{isodoc}{Illegal date: day>31}{}\fi
+ \fi
+}
+% \end{macrocode}
% \DescribeMacro{\footfield}
% Create any non-empty footfields, starting at left arguments:
% \begin{compactenum}
@@ -1290,8 +1408,8 @@
% \end{macrocode}
% The |\showkeys| command is useful for debugging. It prints a table showing the
% values of most keys.\footnote{Note for developers: the table lines below can
-% be generated with a ruby script listkeys (included at the end of isodoc.dtx):
-% |listkeys isodoc.dtx show|}
+% be generated with a ruby script listkeys (included in the distribution):
+% |listkeys defs|}
% \DescribeMacro{\showkeys}
% \begin{macrocode}
\def\showkeys{%
@@ -1307,6 +1425,7 @@
accountname & \accountname\NN
accountno & \accountno\NN
addresscenter & \addresscenter\NN
+ addresswidth & \addresswidth\NN
areacode & \areacode\NN
autograph & \autograph\NN
bic & \bic\NN
@@ -1322,6 +1441,7 @@
enclosures & \enclosures\NN
fax & \fax\NN
fontpackage & \fontpackage\NN
+ forcedate & \forcedate\NN
iban & \iban\NN
leftaddress & \leftaddress\NN
logoaddress & \logoaddress\NN
@@ -1349,9 +1469,8 @@
\usepackage{hyperref}
\year=0
}
-\AtBeginDocument{%
+\AtEndDocument{%
\hypersetup{pdfauthor={\who},
- pdfsubject={\subject},
pdfproducer={isodoc v\fileversion},
}
}
@@ -1360,7 +1479,8 @@
% \begin{macrocode}
\def\itable#1{
\begin{tabularx}{\hsize}{@{}X@{\barsep\quad\qquad}r@{}}
- \multicolumn{2}{@{}c@{}}{\sffamily\descriptiontext\hfill \amounttext (\currency)}\ML
+ \multicolumn{2}{@{}c@{}}{\sffamily\descriptiontext\hfill
+ \amounttext (\currency)}\ML
#1
\end{tabularx}
}
@@ -1405,18 +1525,19 @@
\newcount\footcount
\newcommand{\invoice}[2][]{%
\closingfalse
- \hypersetup{pdftitle={invoice to \toname\ dated \today}}
\def\barsep{\raisebox{-1.5ex}[0pt][0pt]{\rule{.05em}{4ex}}}%
\letter[#1,opening=\invoicetext,openingcomma={},closing={},signature={}]{%
\Tbox{35}{127}{140}{#2}
}
}
% \end{macrocode}
+% \DescribeMacro{\letter}
% |\letter| prints a letter...
% \begin{macrocode}
\newcommand{\letter}[2][]{{ % extra brace keeps option changes local
- \hypersetup{pdftitle={letter to \toname\ dated \today}}
\setkeys{isodoc}{#1}
+ \hypersetup{pdftitle={letter to \toname\ dated \today},
+ pdfsubject={\subject}}
\label{LastPageOf\thelettercount}
\newpage
\addtocounter{lettercount}{1}
@@ -1428,39 +1549,48 @@
% xaddress should be 1 or 3 for left- and right address windows
% \begin{macrocode}
{ \parskip=0pt\parindent=0pt
- \begin{textblock}{70}[0,.5](\xaddress,\addresscenter)%
+ \begin{textblock}{\addresswidth}[0,.5](\xaddress,\addresscenter)%
\ifreturn
{\def\\{\unskip\enspace\textbullet\enspace\ignorespaces}%
- \sffamily\scriptsize\bfseries\returnaddress
+ \sffamily\bfseries\scriptsize\returnaddress
}\\[-.8\baselineskip]
\rule{\hsize}{.2pt}\\
\fi
\toname\\\toaddress
\end{textblock}
}
- \ifx\subject\empty\else%
- \Tbox{35}{108}{105}{\noindent
- \begin{tabularx}{\hsize}{@{}l>{\raggedright}X@{}}
- \@hft\subjecttext&\subject
- \end{tabularx}
+ \openingpos=\headerpos
+ \ifheader
+ \advance\openingpos12
+ \advance\bodyskip12mm
+ \Tbox{35}{\headerpos}{35}{\noindent
+ {\@hft\yourlettertext}\\
+ \yourletter
+ }
+ \Tbox{70}{\headerpos}{35}{\noindent
+ {\@hft\yourreftext}\\
+ \raggedright\yourref
}
+ \Tbox{105}{\headerpos}{35}{\noindent
+ {\@hft\ourreftext}\\
+ \raggedright\ourref
+ }
+ \Tbox{140}{\headerpos}{35}{\noindent
+ {\@hft\datetext}\\
+ \ifx\forcedate\empty%
+ \ifnum\year=0\Undefined{date}\else\date\fi
+ \else\forcedate\fi
+ }
+ \ifx\subject\empty\else%
+ \advance\openingpos10
+ \advance\bodyskip10mm
+ \Tbox{35}{108}{105}{\noindent
+ \begin{tabularx}{\hsize}{@{}l>{\raggedright}X@{}}
+ \@hft\subjecttext&\subject
+ \end{tabularx}
+ }
+ \fi
\fi
- \Tbox{35}{98}{35}{\noindent
- {\@hft\yourlettertext}\\
- \yourletter
- }
- \Tbox{70}{98}{35}{\noindent
- {\@hft\yourreftext}\\
- \raggedright\yourref
- }
- \Tbox{105}{98}{35}{\noindent
- {\@hft\ourreftext}\\
- \raggedright\ourref
- }
- \Tbox{140}{98}{35}{\noindent
- {\@hft\datetext}\\
- \ifnum\year=0\Undefined{date}\else\date\fi
- }
\footcount=35
\iffooter
\footfield{\websitetext}{}{\website}
@@ -1470,8 +1600,8 @@
\footfield{\emailtext}{}{\email}
\fi
{ \parskip=0pt\parindent=0pt
- \begin{textblock*}{3mm}(201mm,\yfold)%
- \rule{\hsize}{.2pt}
+ \begin{textblock*}{3mm}(\xfold,\yfold)%
+ {\color{markercolor}\rule{\hsize}{.2pt}}
\end{textblock*}
}
\ifx\undefined\accepttype\else\accept\fi
@@ -1584,11 +1714,13 @@
{\ocrb\acceptcents}
}
% \end{macrocode}
-% Definitions of field names in various languages; corrections and suggestions
-% are very welcome:
+% Definitions of field names in various languages; corrections
+% and suggestions are very welcome:
% \DescribeMacro{\dutchdoc}
% \begin{macrocode}
-\def\set@lang#1{\ifpreamble\AtBeginDocument{\selectlanguage{#1}}\else\selectlanguage{#1}\fi}
+\def\set@lang#1{%
+ \ifpreamble\AtBeginDocument{\selectlanguage{#1}}%
+ \else\selectlanguage{#1}\fi}
\def\dutchdoc{%
\set@lang{dutch}
\def\yourlettertext{Uw brief van}
@@ -1792,9 +1924,9 @@
\def\Totaltext{Total}
}
% \end{macrocode}
-% \DescribeMacro{\norskdoc}
+% \DescribeMacro{\norwegiandoc}
% \begin{macrocode}
-\def\norskdoc{%
+\def\norwegiandoc{%
\set@lang{norsk}
\def\yourlettertext{Deres brev av}
\def\yourreftext{Deres ref:}
@@ -1833,4 +1965,4 @@
% \end{macrocode}
% \Finale
\endinput
-$Id: isodoc.dtx,v 1.25 2009-06-15 11:29:33 wybo Exp $
+$Id: isodoc.dtx,v 1.28 2010-01-02 16:54:02 wybo Exp $
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 02:44:27 +0000