diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/vrsion/vrsion.dtx')
-rw-r--r-- | Master/texmf-dist/source/latex/vrsion/vrsion.dtx | 726 |
1 files changed, 0 insertions, 726 deletions
diff --git a/Master/texmf-dist/source/latex/vrsion/vrsion.dtx b/Master/texmf-dist/source/latex/vrsion/vrsion.dtx deleted file mode 100644 index 91f5ed1889d..00000000000 --- a/Master/texmf-dist/source/latex/vrsion/vrsion.dtx +++ /dev/null @@ -1,726 +0,0 @@ -% -% \iffalse -% -% The first part is a comment to the reader(s) of `vrsion.dtx'. -% -% vrsion.dtx version 1.41, February 22, 1997 -% (c) 1994-1997 by Mats Dahlgren (matsd@homenet.se) -% -% Please see the information in file `vrsion.ins' on how you -% may use and (re-)distribute this file. Run LaTeX on the file -% `vrsion.ins' to get a .sty-file and on vrsion.dtx to obtain the -% instructions. -% -% This file may NOT be distributed if not accompanied by 'vrsion.ins'. -% -%<*driver> -\documentclass[a4paper]{ltxdoc} -\textwidth=150mm -\textheight=210mm -\topmargin=0mm -\oddsidemargin=5mm -\evensidemargin=5mm -\RecordChanges -%\begin{document} - \DocInput{vrsion.dtx} -% \PrintChanges -\end{document} -%</driver> -% \fi -% -% \CheckSum{804} -% -% \def\filename{vrsion.dtx} -% \def\fileversion{1.41} -% \def\filedate{1997/02/22}\def\docdate{\filedate} -% \date{\docdate} -% \changes{1.0}{1994/12/28}{First version of `version' package.} -% \changes{1.1}{1995/05/15}{Fixed extra spaces and warning in -% the documentation that \texttt{\textbackslash version} is a fragile -% command. Also changed the name of the package.} -% \changes{1.2}{1995/05/31}{Fixed \textsf{babel} -% incompatibility and made \texttt{\textbackslash version} robust.} -% \changes{1.3}{1996/02/08}{Cosmetics in the installation -% routine, adjustments to changes in \textsf{babel}, making use -% of \textsf{xspace} if loaded, and a working solution to -% problems with \texttt{\textbackslash maketitle} command.} -% \changes{1.4}{1996/06/25}{Fixed incompatibility with the -% \textsf{koma-script} package.} -% \changes{1.41}{1997/02/22}{Upgraded documentation.} -% \MakeShortVerb{\|} -% \title{\textsf{vrsion}\\ -- a \LaTeX{} Macro for version Numbering of -% Files\thanks{This document describes \textsf{vrsion} version -% \fileversion , and was last revised on \docdate.}} -% \author{Mats Dahlgren\\ (\texttt{matsd@homenet.se})} -% \begin{document} -% \maketitle -% \begin{abstract} -% The \textsf{vrsion} package provides a user-friendly way to -% introduce file version numbers in \LaTeX{} documents. -% It remembers the previous version number, also when -% the |.aux|-file is corrupted (due to errors in the -% \LaTeX{} run).\\ \small This file and the package:\ -% Copyright \copyright\ 1994-97 by Mats Dahlgren. All rights -% reserved. -% \end{abstract} -% -% \section{Introduction} -% \DescribeMacro\version -% This package provides one command, |\version|, which -% puts a version number where it appears. The version -% number is increased each time \LaTeX{} is run, -% \textit{i.e.}\ it numbers the |.dvi|-file. If the -% package is loaded but the command |\version| is not -% issued, the present version number is preserved. -% Numbering can be incremented at three different levels: -% units, tenths, and hundreds. A change between two of these -% is obtained by changing the package option. After a change -% of steplength, the previous version number is -% incremented with the new steplength. The version number -% can be held constant by using the command -% \DescribeMacro\keepversion -% |\keepversion|; this enables the version number to be -% printed without being increased. (|\keepversion| can be -% \DescribeMacro\stepversion -% overridden by the command |\stepversion|.) -% -% \section{Userguide} -% \subsection{Requirements} -% The file |vrsion.sty| must be available in the user's -% |TEXINPUTS| directories. It requires \LaTeXe{} of -% 1995/12/01 (or newer). -% -% \subsection{Usage} -% The package is included by stating \\ -% | \usepackage[|\textit{option}|]{vrsion}|\\ -% \DescribeMacro{one} \DescribeMacro{ten} -% \DescribeMacro{hundred} \DescribeMacro{xspace} -% in the document preamble. It can take one of the -% options |one|, |ten|, and |hundred|, and in addition |xspace|. -% To produce a -% version number anywhere in your document you issue the -% \DescribeMacro\version -% command |\version| at the desired place in your \LaTeX{} -% input file.\footnote{Notice that the text ``version'' -% is \textit{not} produced by the -% \texttt{\textbackslash version} command.} The -% version number will then be incremented each time you -% run \LaTeX{} on the file. The command |\version| is -% robust.\footnote{Thanks to Timothy Robertson -% (\texttt{timothyr@cmbr.phys.cmu.edu}) for bringing my -% attention to the problem of \texttt{\textbackslash version} -% being fragile.} Depending on the option -% used, the version number will be an integer (no option -% or option |one|), a number with one decimal (option -% |ten|), or a two-decimal number (option |hundred|). -% If the option |xspace| is specified, the \textsf{xspace} -% package is loaded and its features are benefited from. (If -% the \textsf{xspace} package is loaded by a separate -% |\usepackage| statement or by another package, its features -% are used by \textsf{vrsion}.) -% -% When changing from one option (of |one|, |ten|, or |hundred|) -% to another, the previous -% format of the version number will be changed according -% to the new option. If a smaller increment is -% specified, the next increment will simply append one -% digit |1| to the old version number; \textit{e.g.}\ a -% change from option |ten| to |hundred| after version 3.2 -% will result in version 3.21. If a larger increment is -% specified, the old version number will be truncated -% before the increment; \textit{e.g.}\ a change from -% option |hundred| to |ten| after version 3.25 -% will result in version 3.3. You should (normally) not -% use the command |\version| more once in a document. -% The version number is stored in a file with extension -% `|vrs|' in the default directory. (The full name of this -% file is |\jobname.vrs|.) -% -% If you want your document to contain a version -% number without having it incremented each time -% you run \LaTeX{}, you should issue the command -% \DescribeMacro\keepversion -% |\keepversion| in the document (preamble). This -% switches off the incrementation mechanism and prevents -% the package from writing an updated |.vrs|-file. -% The |\keepversion| command can be cancelled at -% any later place in the document by issuing the -% \DescribeMacro\stepversion -% command |\stepversion|. The action taken by the -% |\version| command is determined by which of these -% two was last issued. -% -% Typically, you would load the \textsf{vrsion} package -% with the desired option and use the command -% |\version| where you want your document to state -% its version number. Normally, you would have the -% |\keepversion| command in the preamble, but -% comment it out on the first \LaTeX{} run when you -% prepare to print a new version and then have the -% |\keepversion| in action during the \LaTeX{} runs -% needed to resolve the references. -% -% When it is desired to repeat the version number -% several times in a document, issue a -% |\keepversion| directly after the first use of -% |\version|. This will then produce the same -% version number at all occurrences; and the version -% number will be incremented according to the use of -% |\keepversion| in the preamble. -% -% If the increase of the version number is to occur -% at any stage later than the fist occurrence of -% |\version|, the occurrence of |\version| -% which is to increase the version number should be -% preceeded by a |\stepversion| command (and -% followed by |\keepversion| to prevent further -% increments). The author can not think of any -% reason why this should be desired, but it can be -% achieved anyway$\ldots$ -% -% \subsection{Known Problems} -% \begin{itemize} -% \item At the present (\filedate), \textsf{vrsion} does not -% work properly with neither the \textsf{letter} nor the -% \textsf{scrlettr} document classes. -% \item The |\vrsion| package is not working properly with the -% |\include{|\textit{file}|}| command; use |\input{|\textit{file}|}| -% instead. -% \item If the command |\version| is issued more than once -% in a document, the version number will be incremented -% at each occurrence and produce different version -% numbers at the different occurrences (unless -% |\keepversion| is in effect). This may typically be a -% problem if you use |\version| in the page header or footer. -% This is avoided if |\keepversion| is issued somewhere on the -% second page. -% \end{itemize} -% -% \section{History} -% The first version of the package was released in late -% December of 1994. The package -% was created with useful help and ideas from Johan -% Fr\"oberg (\texttt{emgion@physchem.kth.se}). \par -% The \textsf{vrsion} package version \fileversion{} has -% been tested with \LaTeXe{} of -% 1996/06/01 running -% \TeX{} 3.14159 under OpenVMS. Please send bug reports -% (see below), corrections, additions, suggestions, -% \textit{etc.}\ to me at \texttt{matsd@physchem.kth.se}. -% -% \subsection{Changes from previous versions} -% -% In \textsf{vrsion} (|version|) version 1.0 the macro -% |\@skrivner| caused extra -% space to be inserted in front of the version number. With -% \textsf{vrsion} version 1.1 and later this is avoided. -% -% In version 1.1 the \textsf{vrsion} package had incompatibility -% problems with the \textsf{babel} package.\footnote{Thanks to Peter -% Ryder (\texttt{ryder@theo.physik.uni-bremen.de}) for -% bringing my attention to this problem.} With \textsf{vrsion} -% version 1.2 this problem is eliminated. Also, the command -% |\version| has been made robust. -% -% In version 1.3, some adjustments to changes in the \textsf{babel} -% package have been made,\footnote{Thanks to Cornelius C.\ Noack -% (\texttt{noack@physik.uni-bremen.de}) for bringing my attention to -% the re-appearance of the \textsf{babel} incompatibility.} -% if the \textsf{xspace} package is -% loaded, its features are made use of. Also, some problems with -% |\maketitle| issuing extra blank page(s) have been -% eliminated,\footnote{Thanks to Ludek Matyska (\texttt{ludek@muni.cz}) -% for pointing out this problem.} it -% seems (at least for the \textsf{article}, \textsf{report}, and -% \textsf{book} classes). Furthermore, some cosmetics -% in the installation routine have been added. -% -% Version 1.4 eliminated an incompatibility with -% the \textsf{koma-script} package. The incompatibility was that -% some features of \textsf{koma-script}'s version of the -% |\maketitle| command were lost when \textsf{vrsion} was -% loaded.\footnote{Thanks to Christofer P.\ Baron -% (\texttt{baron@iml.fgh.de}) for bringing my attention to this -% problem.} Furthermore, some |\typeout| statements have been -% removed and the processing order of some of the macro -% definitions has been changed. -% -% \section{Sending a Bug Report} -% \textsf{vrsion} is most likely to contain bugs. -% Reports of bugs in the package are most welcome. -% When filing a bug report, -% please take the following actions: -% \begin{enumerate} -% \item Ensure your problem is not due to your inputfile; -% \item Ensure your problem is not due to -% your own package(s) or class(es); -% \item Ensure your problem is not covered in the section -% ''Known Problems'' above; -% \item Try to locate the problem by writing a minimal -% \LaTeX{} input file which reproduces the problem. -% Include the command\\ -% | \setcounter{errorcontextlines}{999}|\\ -% in your input; -% \item Run your file through \LaTeX ; -% \item Send a description of your problem, the input file -% and the log file via e-mail to:\\ \hspace*{5mm} -% \texttt{matsd@homenet.se}. -% \end{enumerate} -% \bigskip -% -% {\itshape Enjoy your \LaTeX!\raisebox{-\baselineskip}{mats d.}} -% \StopEventually{\par\vfill\hfill{\scriptsize Copyright -% \copyright{} 1996-97 by Mats Dahlgren.}} -% \newpage -% -% \section{The Code} -% For the interested reader(s), here is a short description -% of the code. -% -% First, the package should identify itself: -% \iffalse -%<*paketkod> -% \fi -% \begin{macrocode} -\NeedsTeXFormat{LaTeX2e}[1995/12/01] -\ProvidesPackage{vrsion}% - [1997/02/22 version numbering of LaTeX files (v.1.41).] -% \end{macrocode} -% \par Some counters and booleans used -% are to be defined first. Also the user commands -% |\keepversion| and |\stepversion|, which only (re-)set -% the |Keepversion| boolean, are defined. -% \begin{macrocode} -\newcounter{versionnr} -\newcounter{versionnrten}[versionnr] -\newcounter{versionnrhundred}[versionnrten] -\@addtoreset{versionnrhundred}{versionnr} -\newif\ifKeepversion \Keepversionfalse -\newif\ifxspc \xspcfalse -\newcommand{\keepversion}{\global\Keepversiontrue} -\newcommand{\stepversion}{\global\Keepversionfalse} -% \end{macrocode} -% \par Next, the options are declared. The declaration of -% option |one| is the default version of the |\version| -% macro. If the boolean -% |Keepversion| (set by the command |\keepversion|) is -% true, no increase of the version number is preformed, -% nor is anything written to the |.vrs|-file. The command -% |\@skrivner| is responsible for writing the |.vrs|-file -% (``skriv ner'' is Swedish for ``write down''). -% \begin{macrocode} -\DeclareOption{one}{% -\DeclareRobustCommand{\version}{% - \ifKeepversion \else - \stepcounter{versionnr}% - \@skrivner - \fi - \theversionnr% - \@ifundefined{xspace}{}{\xspace}% -} -} -% \end{macrocode} -% The |ten| option modifies the |\version| command to -% produce a decimal number and steps the integer version -% number if the decimal part reaches 10. -% \begin{macrocode} -\DeclareOption{ten}{% - \DeclareRobustCommand{\version}{% - \ifKeepversion \else - \stepcounter{versionnrten}% - \ifnum\theversionnrten=10\stepcounter{versionnr} \fi - \@skrivner - \fi - \theversionnr .\theversionnrten% - \@ifundefined{xspace}{}{\xspace}% - } -} -% \end{macrocode} -% The option |hundred| does the same as |ten|, but with -% a two-decimal number. -% \begin{macrocode} -\DeclareOption{hundred}{% - \DeclareRobustCommand{\version}{% - \ifKeepversion \else - \stepcounter{versionnrhundred}% - \ifnum\theversionnrhundred=10\stepcounter{versionnrten} \fi - \ifnum\theversionnrten=10\stepcounter{versionnr} \fi - \@skrivner - \fi - \theversionnr .\theversionnrten\theversionnrhundred% - \@ifundefined{xspace}{}{\xspace}% - } -} -% \end{macrocode} -% The |xspace| option, which only forces the \textsf{xspace} package -% to be loaded, is quite short in the code: -% \begin{macrocode} -\DeclareOption{xspace}{\global\xspctrue} -% \end{macrocode} -% All other options which may be specified are to be -% ignored: -% \begin{macrocode} -\DeclareOption*{\OptionNotUsed} -% \end{macrocode} -% \par Now we can process the options, and -- if requested -- load -% the \textsf{xspace} package. -% \begin{macrocode} -\ExecuteOptions{one} -\ProcessOptions -\ifxspc\RequirePackage{xspace}\fi -% \end{macrocode} -% \par Now the task is to define the internals. The macro -% |\vrsFile| simply holds the name of the |.vrs|-file to -% use. The macro |\@skrivner| writes the version number -% counters to a file -% in a format which is easy to deal with in -% \LaTeX{}, a name-wise change\footnote{This was nessecary -% to make \texttt{vrsion} compatible with \textsf{babel}.} -% of the the ordinary |\label| format. The internal -% macro |\@vrs| is used to avoid problems with label -% change warnings and to avoid trouble with missing -% version number information in the |.aux|-file when -% |\keepversion| is used. As an aid, the dummy-counter -% |VrsNr| is used. -% \begin{macrocode} -\def\vrsFile{\jobname.vrs} -\newwrite\@vrs -\newcounter{VrsNr} -\def\@skrivner{% - \setcounter{VrsNr}{\@partaux}% - \addtocounter{VrsNr}{1}% - \let\@vrs=\theVrsNr% - \immediate\openout\@vrs\vrsFile% - \immediate\write\@vrs{\relax}% - \immediate\write\@vrs{% - \string\vrslabel{versionsnummer}{{\theversionnr}{\thepage}}}% - \immediate\write\@vrs{% - \string\vrslabel{versionsnummertio}{{\theversionnrten}{\thepage}}}% - \immediate\write\@vrs{% - \string\vrslabel{versionsnummerhundra}{{\theversionnrhundred}{\thepage}} -}% - \immediate\closeout\@vrs{}% -} -% \end{macrocode} -% \par\textsf{babel} compatibility -% is obtained by defining special |\label| and |\ref| commands. -% \begin{macrocode} -\@ifundefined{bbl@ref}{\let\vrsref=\ref}{\let\vrsref=\bbl@ref} -\@ifundefined{bbl@newlabel}{\let\vrslabel=\newlabel}% -{\let\vrslabel=\bbl@newlabel} -% \end{macrocode} -% \par If it exists, the file |\jobname.vrs| should -% be read, and the counters set accordingly. If this file -% is missing, the counters should be zero. -% \begin{macrocode} -\IfFileExists{\vrsFile}{\@@input\vrsFile% - \setcounter{versionnr}{\vrsref{versionsnummer}}% - \setcounter{versionnrten}{\vrsref{versionsnummertio}}% - \setcounter{versionnrhundred}{\vrsref{versionsnummerhundra}}% - }{% - \typeout{No file \vrsFile.}% - \setcounter{versionnr}{\z@}% - \setcounter{versionnrten}{\z@}% - \setcounter{versionnrhundred}{\z@}% -} -% \end{macrocode} -% \par To prevent |\maketitle| from creating extra blank pages, -% some commands from the \LaTeXe{} kernel have to be slightly -% modified. To make sure we use the desired definitions, the -% changes are issued in an |\AtBeginDocument| command. (The -% changes are that a few |\newpage| commands have been removed and -% that a |\cleardoublepage| has been removed for the \textsf{book} -% class.) To cope with the incompatibility of the -% \textsf{koma-script} package, different modified definitions are -% used. Which is to be used is tested in an |\@ifundefined| -% statement. -% \begin{macrocode} -\AtBeginDocument{% -\@ifundefined{subject}{% -\if@titlepage - \renewcommand\maketitle{\begin{titlepage}% - \let\footnotesize\small - \let\footnoterule\relax - \let \footnote \thanks - \null\vfil - \vskip 60\p@ - \begin{center}% - {\LARGE \@title \par}% - \vskip 3em% - {\large - \lineskip .75em% - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par}% - \vskip 1.5em% - {\large \@date \par}% - \end{center}\par - \@thanks - \vfil\null - \end{titlepage}% - \setcounter{footnote}{0}% - \global\let\thanks\relax - \global\let\maketitle\relax - \global\let\@thanks\@empty - \global\let\@author\@empty - \global\let\@date\@empty - \global\let\@title\@empty - \global\let\title\relax - \global\let\author\relax - \global\let\date\relax - \global\let\and\relax -} -\else -\renewcommand\maketitle{\par - \begingroup - \renewcommand\thefootnote{\@fnsymbol\c@footnote}% - \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}% - \long\def\@makefntext##1{\parindent 1em\noindent - \hb@xt@1.8em{% - \hss\@textsuperscript{\normalfont\@thefnmark}}##1}% - \if@twocolumn - \ifnum \col@number=\@ne - \@maketitle - \else - \twocolumn[\@maketitle]% - \fi - \else - \global\@topnum\z@ - \@maketitle - \fi - \thispagestyle{plain}\@thanks - \endgroup - \setcounter{footnote}{0}% - \global\let\thanks\relax - \global\let\maketitle\relax - \global\let\@maketitle\relax - \global\let\@thanks\@empty - \global\let\@author\@empty - \global\let\@date\@empty - \global\let\@title\@empty - \global\let\title\relax - \global\let\author\relax - \global\let\date\relax - \global\let\and\relax -} -\def\@maketitle{% - \null - \vskip 2em% - \begin{center}% - \let \footnote \thanks - {\LARGE \@title \par}% - \vskip 1.5em% - {\large - \lineskip .5em% - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par}% - \vskip 1em% - {\large \@date}% - \end{center}% - \par - \vskip 1.5em} -\fi% -\renewenvironment{titlepage}{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi - \thispagestyle{empty}% - \setcounter{page}\@ne - }% - {\if@restonecol\twocolumn \else \newpage \fi - \if@twoside\else - \setcounter{page}\@ne - \fi - } -}{% -% \end{macrocode} -% So much for the ordinary \LaTeXe{} kernel code. Next follows -% the code borrowed from the \textsf{koma-script} bundle by Markus -% Kohm,\footnote{Special thanks to Markus Kohm -% (\texttt{Markus\underline{\space}Kohm@ka2.maus.de}) -% for letting me incorporate this -% code.} also with some modifications. -% \begin{macrocode} -\if@titlepage - \newcommand*\maketitle[1][1]{\begin{titlepage}% - \setcounter{page}{#1} - \let\footnotesize\small - \let\footnoterule\relax - \let\footnote\thanks - \ifx\@extratitle\@empty \else - \noindent\@extratitle\next@tpage\thispagestyle{empty} - \fi - \ifx\@titlehead\@empty \else - \noindent\begin{minipage}[t]{\textwidth} - \@titlehead - \end{minipage}\par - \fi - \null\vfill - \begin{center} - \ifx\@subject\@empty \else - {\Large \@subject \par} - \vskip 3em - \fi - {\huge {\sectfont \@title \par}} - \vskip 3em - {\Large \lineskip 0.75em - \begin{tabular}[t]{c} - \@author - \end{tabular}\par} - \vskip 1.5em - {\Large \@date \par} - \vskip \z@ \@plus3fill - {\Large \@publishers \par} - \vskip 3em - \end{center}\par - \@thanks - \vfill\null - \if@twoside\next@tpage - \noindent\begin{minipage}[t]{\textwidth} - \@uppertitleback - \end{minipage}\par - \vfill - \noindent\begin{minipage}[b]{\textwidth} - \@lowertitleback - \end{minipage} - \fi - \ifx\@dedication\@empty \else - \next@tpage\null\vfill - {\centering \Large \@dedication \par} - \vskip \z@ \@plus3fill - \if@twoside \next@tpage \fi - \fi - \end{titlepage} - \setcounter{footnote}{0}% - \global\let\thanks\relax - \global\let\maketitle\relax - \global\let\@thanks\@empty - \global\let\@author\@empty - \global\let\@date\@empty - \global\let\@title\@empty - \global\let\@extratitle\@empty - \global\let\@titlehead\@empty - \global\let\@subject\@empty - \global\let\@publishers\@empty - \global\let\@uppertitleback\@empty - \global\let\@lowertitleback\@empty - \global\let\@dedication\@empty - \global\let\author\relax - \global\let\title\relax - \global\let\extratitle\relax - \global\let\titlehead\relax - \global\let\subject\relax - \global\let\publishers\relax - \global\let\uppertitleback\relax - \global\let\lowertitleback\relax - \global\let\dedication\relax - \global\let\date\relax - \global\let\and\relax} -\else - \newcommand*\maketitle[1][1]{\par - \begingroup - \renewcommand\thefootnote{\@fnsymbol\c@footnote}% - \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}% - \long\def\@makefntext##1{\parindent 1em\noindent - \hb@xt@1.8em{% - \hss\@textsuperscript{\normalfont\@thefnmark}}##1}% - \if@twocolumn - \ifnum \col@number=\@ne - \@maketitle - \else - \twocolumn[\@maketitle]% - \fi - \else - \global\@topnum\z@ - \@maketitle - \fi - \thispagestyle{plain}\@thanks - \endgroup - \setcounter{footnote}{0}% - \let\thanks\relax - \let\maketitle\relax - \let\@maketitle\relax - \global\let\@thanks\@empty - \global\let\@author\@empty - \global\let\@date\@empty - \global\let\@title\@empty - \global\let\@extratitle\@empty - \global\let\@titlehead\@empty - \global\let\@subject\@empty - \global\let\@publishers\@empty - \global\let\@uppertitleback\@empty - \global\let\@lowertitleback\@empty - \global\let\@dedication\@empty - \global\let\author\relax - \global\let\title\relax - \global\let\extratitle\relax - \global\let\titlehead\relax - \global\let\subject\relax - \global\let\publishers\relax - \global\let\uppertitleback\relax - \global\let\lowertitleback\relax - \global\let\dedication\relax - \global\let\date\relax - \global\let\and\relax} -\fi -\def\@maketitle{% - \let\footnote\thanks - \ifx\@extratitle\@empty \else - \noindent\@extratitle \next@tpage \if@twoside \null\next@tpage \fi - \fi - \ifx\@titlehead\@empty \else - \noindent\begin{minipage}[t]{\textwidth} - \@titlehead - \end{minipage}\par - \fi - \null - \vskip 2em% - \begin{center}% - \ifx\@subject\@empty \else - {\Large \@subject \par} - \vskip 1.5em - \fi - {\huge \@title \par}% - \vskip 1.5em% - {\Large - \lineskip .5em% - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par}% - \vskip 1em% - {\Large \@date \par}% - \vskip \z@ \@plus 1em - {\Large \@publishers \par} - \ifx\@dedication\@empty \else - \vskip 2em - {\Large \@dedication \par} - \fi - \end{center}% - \par - \vskip 2em}% -\renewenvironment{titlepage}{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi - \thispagestyle{empty}% - \if@compatibility - \setcounter{page}{0} - \fi}% - {\if@restonecol\twocolumn \else \newpage \fi}% -}% -} -% \end{macrocode} -% \par This brings us to the end of \textsf{vrsion}. Hope you'll -% enjoy it! -% \iffalse -%</paketkod> -% \fi -% -% \Finale -% -\endinput |