summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/exframe/exframe.dtx
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/exframe/exframe.dtx')
-rw-r--r--Master/texmf-dist/source/latex/exframe/exframe.dtx281
1 files changed, 175 insertions, 106 deletions
diff --git a/Master/texmf-dist/source/latex/exframe/exframe.dtx b/Master/texmf-dist/source/latex/exframe/exframe.dtx
index 4bfa73d693e..43557d40939 100644
--- a/Master/texmf-dist/source/latex/exframe/exframe.dtx
+++ b/Master/texmf-dist/source/latex/exframe/exframe.dtx
@@ -18,10 +18,10 @@
% and the derived files exframe.sty and exfsmp1.tex.
%
%<package|sample1>\NeedsTeXFormat{LaTeX2e}[1996/12/01]
-%<package>\ProvidesPackage{exframe}[2019/01/16 v3.0 Framework for Exercise Problems]
-%<sample1>\ProvidesFile{exfsmp1.tex}[2019/01/16 v3.0 sample 1 for exframe]
+%<package>\ProvidesPackage{exframe}[2019/01/21 v3.1 Framework for Exercise Problems]
+%<sample1>\ProvidesFile{exfsmp1.tex}[2019/01/21 v3.1 sample 1 for exframe]
%<*driver>
-\def\thedate#1{2019/01/16}\def\theversion#1{v3.0}
+\def\thedate#1{2019/01/21}\def\theversion#1{v3.1}
\ProvidesFile{exframe.dtx}[\thedate{} \theversion{} exframe reference manual file]
\PassOptionsToClass{10pt,a4paper}{article}
\documentclass{ltxdoc}
@@ -323,10 +323,12 @@ problem (|problem|) or sheet (|sheet|)
or display them at a manually chosen location (|manual|).
Note that typically solutions are defined at the end of a (sub)problem
and therefore the choice |here| is similar to (|sub|)|problem|.
-The latter form, however, makes sure that a solution is positioned
-\emph{after} the (sub)problem block
-such that it does not inherit the layout (e.g.\ indentation)
-of the latter even if it is defined within this block.
+The latter form, however, makes sure that a solution
+does not inherit the margin of the parent block.
+The alternate modes |problem*| and |subproblem*|
+positions the solution \emph{after} the (sub)problem block
+such that it does not inherit any layout,
+but also the no definitions made in the parent block.
In |manual| mode, all solutions are collected (with appropriate headers)
until they are output by the directive |\insertsolutions|.
If no solutions are stored in the buffer
@@ -1043,7 +1045,7 @@ and returns it followed by a dot.
\DescribeMacro{\exerciseifempty}
\DescribeMacro{\exerciseifnotempty}
Handy conditionals command to check
-whether an expression \textit{expr} is empty (or pure whitespace) is:
+whether an expression \textit{expr} is empty are:
%
\begin{center}
\begin{tabular}{l}
@@ -1083,7 +1085,8 @@ The package defines a couple of standard styles:
%
\begin{itemize}
\item |solutionbelow=|\textit{pos}
-(can take values |here|, |subproblem|, |problem|, |sheet| and |manual|;
+(can take values |here|, |subproblem|, |subproblem*|, |problem|, |problem*|,
+|sheet| and |manual|;
initially set to |subproblem|) --
positions the solutions below the indicated blocks;
see \secref{sec:solutions} for details.
@@ -1114,7 +1117,10 @@ with the prefix \textit{counter}.
number problems by sheet.
\item |equationbysheet| --
-number equations by sheet.
+number dedicated equations for sheets, problems and solutions by sheet;
+note that the main equation counter is unaffected by this setting,
+it therefore makes sense to also activate the style |sheetequation|
+or use |\counterwithin{equation}{sheet}|.
\item |pagebysheet| --
number pages by sheet and denote pages by \textit{sheet}|.|\textit{page};
@@ -1517,6 +1523,18 @@ Define structures for multiple-choice questions.
\subsection{Revision History}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\paragraph{v3.1:} 2019/01/21
+
+\begin{itemize}
+\item
+alternate placement modes for solutions
+\item
+fixed expansion of problem title
+\item
+reset font size for problem text
+\end{itemize}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v3.0:} 2019/01/16
\begin{itemize}
@@ -2231,7 +2249,7 @@ This is beyond the scope of this example.
%
% Basic style for all exercise text:
% \begin{macrocode}
-\exerciseconfig{styletext}{\normalfont}
+\exerciseconfig{styletext}{\normalsize\normalfont}
% \end{macrocode}
% Style for problems:
% \begin{macrocode}
@@ -2385,6 +2403,11 @@ This is beyond the scope of this example.
% \begin{macrocode}
\exerciseconfig{insertproblemafter}{}
% \end{macrocode}
+% Code to insert between a problem and its solution
+% (if style |solutionbelow| is |problem|):
+% \begin{macrocode}
+\exerciseconfig{insertproblemsolution}{}
+% \end{macrocode}
% Code to insert text into the problem opening line
% by means of |\addprobleminfo|:
% \begin{macrocode}
@@ -2395,6 +2418,7 @@ This is beyond the scope of this example.
\exerciseconfig{insertsubproblembefore}{}
\exerciseconfig{insertsubproblemafter}{}
\exerciseconfig{insertsubprobleminfo}{}
+\exerciseconfig{insertsubproblemsolution}{}
% \end{macrocode}
% Analogous definitions for solutions:
% \begin{macrocode}
@@ -2664,7 +2688,8 @@ This is beyond the scope of this example.
% \begin{macrocode}
\def\exf@solutionbelow{subproblem}
\define@choicekey{exf@style}{solutionbelow}%
- {here,subproblem,problem,sheet,manual}{\def\exf@solutionbelow{#1}}
+ {here,subproblem,subproblem*,problem,problem*,sheet,manual}%
+ {\def\exf@solutionbelow{#1}}
% \end{macrocode}
% Conditionals to compare solution locations:
% \begin{macrocode}
@@ -2965,8 +2990,14 @@ This is beyond the scope of this example.
% \end{macrocode}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \paragraph{Problem Info Code.}
+% \paragraph{Problem Block Code.}
%
+% \macro{\exf@addmargin}
+% Define a length for block margin:
+% \begin{macrocode}
+\newlength\exf@addmargin
+% \end{macrocode}
+
% \macro{\exf@section}
% Write out problem opening line followed by some amount of skip
% (positive dimensions add vertical space,
@@ -2984,11 +3015,12 @@ This is beyond the scope of this example.
\exf@exparg{\@startsection{}{}{0pt}{0pt}{#1}{}*}{\exf@tmp}}
% \end{macrocode}
-% \macro{\exf@init@intro}
+% \macro{\exf@init@block}
% Clean info buffer, define amount of skip between items:
% \begin{macrocode}
-\newcommand{\exf@init@intro}[1]%
- {\def\exf@intro{}\def\exf@introitem{}\def\exf@intro@skip{#1}}
+\newcommand{\exf@init@block}[1]{%
+ \def\exf@intro{}\def\exf@intro@skip{#1}%
+ \exf@addmargin0pt\def\exf@introitem{}}
% \end{macrocode}
% \macro{\exf@append@intro}
% Append to info buffer:
@@ -3002,16 +3034,27 @@ This is beyond the scope of this example.
\newcommand{\exf@prepend@intro}[1]%
{\exf@prepend@def\exf@intro{#1\hspace{\exf@intro@skip}}}
% \end{macrocode}
-% \macro{\exf@write@intro}
-% Compose opening line:
+% \macro{\exf@open@block}
+% Open block, set margin, compose opening line:
% \begin{macrocode}
-\newcommand{\exf@write@intro}[1]{%
+\newcommand{\exf@open@block}[1]{%
+ \advance\leftskip\exf@addmargin%
+ \advance\linewidth-\exf@addmargin%
+ \advance\@totalleftmargin\exf@addmargin%
\ifx\exf@intro\exf@empty%
\exf@section{0pt}{\exf@introitem}%
\else%
\exf@section{#1}{\exf@introitem\exf@intro\unskip}%
\fi}%
% \end{macrocode}
+% \macro{\exf@close@block}
+% Close block, undo margin:
+% \begin{macrocode}
+\newcommand{\exf@close@block}{%
+ \advance\leftskip-\exf@addmargin%
+ \advance\linewidth\exf@addmargin%
+ \advance\@totalleftmargin-\exf@addmargin}%
+% \end{macrocode}
% \macro{\addprobleminfo}
% Interface to append or prepend to info buffer:
@@ -3675,12 +3718,6 @@ This is beyond the scope of this example.
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Problems.}
%
-% \macro{\ifexf@problem@solnewsec}
-% Conditional to mark whether problem has been encountered:
-% \begin{macrocode}
-\newif\ifexf@problem@solnewsec\exf@problem@solnewsectrue
-% \end{macrocode}
-
% \macro{exf@problem}
% Define options for |problem| environment:
% \begin{macrocode}
@@ -3695,16 +3732,22 @@ This is beyond the scope of this example.
% \begin{macrocode}
\newenvironment{\exf@problemname}[1][]{%
% \end{macrocode}
-% Start with new paragraph, set text style, add vspace and step counter:
+% Start with new paragraph, set text style, add vspace:
+% \begin{macrocode}
+ \par\exf@config@styletext\addvspace{\exf@config@skipproblemabove}%
+% \end{macrocode}
+% Step problem counter:
% \begin{macrocode}
- \par\exf@config@styletext%
- \addvspace{\exf@config@skipproblemabove}%
\refstepcounter{\exf@problemcounter}%
% \end{macrocode}
-% Insert hook code, remember that a new problem was encountered:
+% Insert hook code:
% \begin{macrocode}
\exf@config@insertproblembefore%
- \global\exf@problem@solnewsectrue%
+% \end{macrocode}
+% Begin inner group, mark in problem:
+% \begin{macrocode}
+ \begingroup%
+ \def\exf@in@problem{}%
% \end{macrocode}
% Use equation counter for problems:
% \begin{macrocode}
@@ -3715,12 +3758,9 @@ This is beyond the scope of this example.
\let\theHequation\theHexf@problemequation%
\fi%
% \end{macrocode}
-% Start a block, mark in problem, initialise variables,
-% process arguments:
+% Initialise variables, process arguments:
% \begin{macrocode}
- \begingroup%
- \def\exf@in@problem{}%
- \exf@init@intro{\exf@config@skipprobleminfo}%
+ \exf@init@block{\exf@config@skipprobleminfo}%
\def\problemtag{\csname the\exf@problemcounter\endcsname}%
\let\exf@points@given\@undefined%
\let\exf@label\@undefined%
@@ -3733,8 +3773,9 @@ This is beyond the scope of this example.
\ifexf@autolabelproblem\label{\exf@config@labelproblem{\problemtag}}\fi%
\ifdefined\exf@label\label{\exf@label}\fi%
% \end{macrocode}
-% Remember problem counter, title for solutions:
+% Mark for new solution section; remember problem counter, title:
% \begin{macrocode}
+ \gdef\exf@problem@solnewsec{}%
\xdef\exf@prevprob{\csname the\exf@problemcounter\endcsname}%
\ifcsname theH\exf@problemcounter\endcsname%
\xdef\exf@prevprobhref{\exf@problemcounter.%
@@ -3743,7 +3784,8 @@ This is beyond the scope of this example.
\ifx\exf@data@problem@rawtitle\exf@empty%
\global\let\exf@prevprobtitle\@undefined%
\else%
- \xdef\exf@prevprobtitle{\exf@data@problem@rawtitle}\fi%
+ \protected@xdef\exf@prevprobtitle{\exf@data@problem@rawtitle}%
+ \fi%
\global\let\exf@prevsubprob\@undefined%
\global\let\exf@prevsubprobhref\@undefined%
% \end{macrocode}
@@ -3795,20 +3837,14 @@ This is beyond the scope of this example.
% \begin{macrocode}
\else%
\ifdim\exf@config@skipproblemitem>0pt%
- \setlength\exf@tmpdim{\exf@config@skipproblemitem}%
+ \setlength\exf@addmargin{\exf@config@skipproblemitem}%
\else%
- \settowidth\exf@tmpdim{%
+ \settowidth\exf@addmargin{%
\exf@config@styletitle\exf@config@styletitleproblem%
\exf@config@composeitemproblem{\exf@config@counterproblemmax}%
\exf@config@composeitemproblemsep}%
\fi%
% \end{macrocode}
-% Set up indentation:
-% \begin{macrocode}
- \advance\leftskip\exf@tmpdim%
- \advance\linewidth -\exf@tmpdim%
- \advance\@totalleftmargin\exf@tmpdim%
-% \end{macrocode}
% Define item label:
% \begin{macrocode}
\def\exf@introitem{\makebox[0cm][r]{%
@@ -3837,7 +3873,7 @@ This is beyond the scope of this example.
% \end{macrocode}
% Write out opening line:
% \begin{macrocode}
- \exf@write@intro{\exf@config@skipproblemtitle}%
+ \exf@open@block{\exf@config@skipproblemtitle}%
% \end{macrocode}
% Add table of contents line:
% \begin{macrocode}
@@ -3898,22 +3934,21 @@ This is beyond the scope of this example.
\PackageWarning{exframe}{no points defined for \exf@problemname}%
\fi\fi%
% \end{macrocode}
-% End paragraph, insert hook code, vertical skip:
+% Solutions to subproblems must be declared within problem block:
% \begin{macrocode}
- \par\endgroup%
- \exf@config@insertproblemafter%
- \addvspace{\exf@config@skipproblembelow}%
+ \global\let\exf@prevsubprob\@undefined%
+ \global\let\exf@prevsubprobhref\@undefined%
+% \end{macrocode}
+% End paragraph and block:
+% \begin{macrocode}
+ \par\exf@close@block%
% \end{macrocode}
% Display solution if desired:
% \begin{macrocode}
\exf@solbelowis{problem}{%
+ \exf@config@insertproblemsolution%
\exf@showsolutions{\exf@config@composetitlesolutionmulti}{}}%
% \end{macrocode}
-% Solutions to subproblems should be declared within problem block:
-% \begin{macrocode}
- \global\let\exf@prevsubprob\@undefined%
- \global\let\exf@prevsubprobhref\@undefined%
-% \end{macrocode}
% Restore original equation counter:
% \begin{macrocode}
\ifexf@style@problemequation%
@@ -3921,6 +3956,20 @@ This is beyond the scope of this example.
\setcounter{equation}{\exf@eqsav}%
\fi%
% \end{macrocode}
+% End inner group:
+% \begin{macrocode}
+ \endgroup%
+% \end{macrocode}
+% Insert hook code, vertical skip:
+% \begin{macrocode}
+ \exf@config@insertproblemafter%
+ \addvspace{\exf@config@skipproblembelow}%
+% \end{macrocode}
+% Display solution if desired:
+% \begin{macrocode}
+ \exf@solbelowis{problem*}{%
+ \exf@showsolutions{\exf@config@composetitlesolutionmulti}{}}%
+% \end{macrocode}
% Done:
% \begin{macrocode}
\ignorespacesafterend}
@@ -3943,28 +3992,21 @@ This is beyond the scope of this example.
% \end{macrocode}
% Start with new paragraph, set text style, add vspace and step counter:
% \begin{macrocode}
- \par%
- {\exf@config@styletext\addvspace{\exf@config@skipsubproblemabove}}%
+ \par{\exf@config@styletext\addvspace{\exf@config@skipsubproblemabove}}%
\refstepcounter{\exf@subproblemcounter}%
% \end{macrocode}
% Insert hook code:
% \begin{macrocode}
\exf@config@insertsubproblembefore%
% \end{macrocode}
-% Remember subproblem counter for solution:
-% \begin{macrocode}
- \xdef\exf@prevsubprob{\csname the\exf@subproblemcounter\endcsname}%
- \ifcsname theH\exf@subproblemcounter\endcsname%
- \xdef\exf@prevsubprobhref{\exf@subproblemcounter.%
- \csname theH\exf@subproblemcounter\endcsname}%
- \fi%
-% \end{macrocode}
-% Start a block, mark in subproblem, initialise variables,
-% process arguments:
+% Start inner group, mark in subproblem:
% \begin{macrocode}
\begingroup%
\def\exf@in@subproblem{}%
- \exf@init@intro{\exf@config@skipsubprobleminfo}%
+% \end{macrocode}
+% Initialise variables, process arguments:
+% \begin{macrocode}
+ \exf@init@block{\exf@config@skipsubprobleminfo}%
\let\exf@subproblem@points\@undefined%
\let\exf@label\@undefined%
\setkeys{exf@subproblem,exf@probleminfo}{#1}%
@@ -3973,6 +4015,14 @@ This is beyond the scope of this example.
% \begin{macrocode}
\ifdefined\exf@label\label{\exf@label}\fi%
% \end{macrocode}
+% Remember subproblem counter for solution:
+% \begin{macrocode}
+ \xdef\exf@prevsubprob{\csname the\exf@subproblemcounter\endcsname}%
+ \ifcsname theH\exf@subproblemcounter\endcsname%
+ \xdef\exf@prevsubprobhref{\exf@subproblemcounter.%
+ \csname theH\exf@subproblemcounter\endcsname}%
+ \fi%
+% \end{macrocode}
% Add given points to problem total:
% \begin{macrocode}
\ifdefined\exf@subproblem@points%
@@ -4019,20 +4069,14 @@ This is beyond the scope of this example.
% \begin{macrocode}
\else%
\ifdim\exf@config@skipsubproblemitem>0pt%
- \setlength\exf@tmpdim{\exf@config@skipsubproblemitem}%
+ \setlength\exf@addmargin{\exf@config@skipsubproblemitem}%
\else%
- \settowidth\exf@tmpdim{%
+ \settowidth\exf@addmargin{%
\exf@config@styletitle\exf@config@styletitlesubproblem%
\exf@config@composeitemsubproblem{\exf@config@countersubproblemmax}%
\exf@config@composeitemsubproblemsep}%
\fi%
% \end{macrocode}
-% Set up indentation:
-% \begin{macrocode}
- \advance\leftskip\exf@tmpdim%
- \advance\linewidth -\exf@tmpdim%
- \advance\@totalleftmargin\exf@tmpdim%
-% \end{macrocode}
% Define item label:
% \begin{macrocode}
\def\exf@introitem{\makebox[0cm][r]{%
@@ -4054,26 +4098,39 @@ This is beyond the scope of this example.
% \end{macrocode}
% Write out opening line:
% \begin{macrocode}
- \exf@write@intro{\exf@config@skipsubproblemtitle}%
+ \exf@open@block{\exf@config@skipsubproblemtitle}%
% \end{macrocode}
% Done:
% \begin{macrocode}
\@afterindentfalse}%
% \end{macrocode}
-% End environment, show points if desired, end paragraph:
+% End environment, show points if desired:
% \begin{macrocode}
{\exf@subpointsatis{end}{\showpoints}%
- \par\endgroup%
% \end{macrocode}
-% Vertical skip, insert hook code:
+% End paragraph and block:
+% \begin{macrocode}
+ \par\exf@close@block%
+% \end{macrocode}
+% Display solution if desired:
+% \begin{macrocode}
+ \exf@solbelowis{subproblem*}{%
+ \exf@config@insertsubproblemsolution%
+ \exf@showsolutions{\exf@config@composetitlesolutionsingle}{}}%
+% \end{macrocode}
+% End inner group:
+% \begin{macrocode}
+ \endgroup%
+% \end{macrocode}
+% Insert hook code, vertical skip:
% \begin{macrocode}
- {\exf@config@styletext\addvspace{\exf@config@skipsubproblembelow}}%
\exf@config@insertsubproblemafter%
+ {\exf@config@styletext\addvspace{\exf@config@skipsubproblembelow}}%
% \end{macrocode}
% Display solution if desired:
% \begin{macrocode}
- \exf@solbelowis{subproblem}{\exf@showsolutions%
- {\exf@config@composetitlesolutionsingle}{}}%
+ \exf@solbelowis{subproblem}{%
+ \exf@showsolutions{\exf@config@composetitlesolutionsingle}{}}%
% \end{macrocode}
% Done:
% \begin{macrocode}
@@ -4103,10 +4160,12 @@ This is beyond the scope of this example.
% \begin{macrocode}
\newenvironment{printsolution}[1]{%
% \end{macrocode}
-% Start new paragraph, add vertical space, insert hook code:
+% Start new paragraph, add vertical space:
+% \begin{macrocode}
+ \par{\exf@config@styletext\addvspace{\exf@config@skipsolutionabove}}%
+% \end{macrocode}
+% Insert hook code:
% \begin{macrocode}
- \par%
- {\exf@config@styletext\addvspace{\exf@config@skipsolutionabove}}%
\exf@config@insertsolutionbefore%
% \end{macrocode}
% Use equation counter for solutions:
@@ -4126,7 +4185,7 @@ This is beyond the scope of this example.
\let\exf@label\@undefined%
\setlength{\exf@solution@points@dim}{0pt}%
\def\exf@solhref{}%
- \exf@init@intro{\exf@config@skipsolutioninfo}%
+ \exf@init@block{\exf@config@skipsolutioninfo}%
\setkeys{exf@solution,exf@probleminfo}{#1}%
% \end{macrocode}
% Set solution counter to reflect associated problem:
@@ -4168,9 +4227,9 @@ This is beyond the scope of this example.
% \begin{macrocode}
\else%
\ifdim\exf@tmp>0pt%
- \setlength\exf@tmpdim{\exf@tmp}%
+ \setlength\exf@addmargin{\exf@tmp}%
\else%
- \settowidth\exf@tmpdim{%
+ \settowidth\exf@addmargin{%
\exf@config@styletitle\exf@config@styletitlesolution%
\ifx\exf@solsubprob\exf@empty%
\exf@config@composeitemsolution{\exf@config@counterproblemmax}%
@@ -4181,12 +4240,6 @@ This is beyond the scope of this example.
\fi\exf@config@composeitemsolutionsep}%
\fi%
% \end{macrocode}
-% Set up indentation:
-% \begin{macrocode}
- \advance\leftskip\exf@tmpdim%
- \advance\linewidth -\exf@tmpdim%
- \advance\@totalleftmargin\exf@tmpdim%
-% \end{macrocode}
% Set item label up depending on problem or subproblem:
% \begin{macrocode}
\ifx\exf@solsubprob\exf@empty%
@@ -4208,7 +4261,7 @@ This is beyond the scope of this example.
% \end{macrocode}
% Write out opening line:
% \begin{macrocode}
- \exf@write@intro{\exf@config@skipsolutiontitle}%
+ \exf@open@block{\exf@config@skipsolutiontitle}%
% \end{macrocode}
% Done:
% \begin{macrocode}
@@ -4223,11 +4276,9 @@ This is beyond the scope of this example.
{\strip@pt\exf@solution@points@dim}{\exf@solution@points}\fi%
\fi\fi\fi%
% \end{macrocode}
-% End paragraph, vertical skip, insert hook code:
+% End paragraph and block:
% \begin{macrocode}
- \par\endgroup%
- {\exf@config@styletext\addvspace{\exf@config@skipsolutionbelow}}%
- \exf@config@insertsolutionafter%
+ \par\exf@close@block%
% \end{macrocode}
% Restore original equation counter:
% \begin{macrocode}
@@ -4236,6 +4287,15 @@ This is beyond the scope of this example.
\setcounter{equation}{\exf@eqsav}%
\fi%
% \end{macrocode}
+% End inner group:
+% \begin{macrocode}
+ \endgroup%
+% \end{macrocode}
+% Vertical skip, insert hook code:
+% \begin{macrocode}
+ {\exf@config@styletext\addvspace{\exf@config@skipsolutionbelow}}%
+ \exf@config@insertsolutionafter%
+% \end{macrocode}
% Done:
% \begin{macrocode}
\ignorespacesafterend}
@@ -4263,6 +4323,8 @@ This is beyond the scope of this example.
{\exf@config@composetocsolution{\exf@solprob}{\exf@solprobtitle}}}%
\exf@solbelowis{problem}{\let\exf@composetitle%
\exf@config@composetitlesolutionsproblemsingle}%
+ \exf@solbelowis{problem*}{\let\exf@composetitle%
+ \exf@config@composetitlesolutionsproblemsingle}%
% \end{macrocode}
% Write section line:
% \begin{macrocode}
@@ -4299,19 +4361,20 @@ This is beyond the scope of this example.
% If this is the first solution within a new section,
% display section heading:
% \begin{macrocode}
- \ifexf@problem@solnewsec%
+ \ifdefined\exf@problem@solnewsec%
\def\exf@probarg{\ifdefined\exf@prevprob prob={\exf@prevprob}\fi%
\ifdefined\exf@prevprobtitle,probtitle={\exf@prevprobtitle}\fi%
\ifdefined\exf@prevprobhref,href={\exf@prevprobhref}\fi%
\ifdefined\exf@sollabel,label={\exf@sollabel}\fi}%
\exf@solbelowis{here}{\let\exf@probarg\@undefined}%
\exf@solbelowis{subproblem}{\let\exf@probarg\@undefined}%
+ \exf@solbelowis{subproblem*}{\let\exf@probarg\@undefined}%
\ifdefined\exf@probarg%
\ifexf@lineno\exf@addbufline{\exf@linesep}\exf@addbufline{\exf@lineno}\fi%
\exf@addbufline{\@backslashchar solutionssection{\exf@probarg}}%
\exf@addbufline{}%
\fi%
- \global\exf@problem@solnewsecfalse%
+ \global\let\exf@problem@solnewsec\@undefined%
\fi%
% \end{macrocode}
% Write separator to buffer:
@@ -4370,10 +4433,16 @@ This is beyond the scope of this example.
% \begin{macrocode}
\exf@solbelowis{here}{\exf@showsolutions%
{\exf@config@composetitlesolutionsingle}{}}%
- \exf@solbelowis{subproblem}{\ifdefined\exf@in@subproblem\else%
- \exf@showsolutions{\exf@config@composetitlesolutionsingle}{}\fi}%
- \exf@solbelowis{problem}{\ifdefined\exf@in@problem\else%
- \exf@showsolutions{\exf@config@composetitlesolutionmulti}{}\fi}%
+ \ifdefined\exf@in@subproblem\else%
+ \exf@solbelowis{subproblem}{%
+ \exf@showsolutions{\exf@config@composetitlesolutionsingle}{}}%
+ \exf@solbelowis{subproblem*}{%
+ \exf@showsolutions{\exf@config@composetitlesolutionsingle}{}}\fi%
+ \ifdefined\exf@in@problem\else%
+ \exf@solbelowis{problem}{%
+ \exf@showsolutions{\exf@config@composetitlesolutionmulti}{}}%
+ \exf@solbelowis{problem*}{%
+ \exf@showsolutions{\exf@config@composetitlesolutionmulti}{}}\fi%
% \end{macrocode}
% Done:
% \begin{macrocode}