diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/etl/etl.dtx')
-rw-r--r-- | Master/texmf-dist/source/latex/etl/etl.dtx | 383 |
1 files changed, 286 insertions, 97 deletions
diff --git a/Master/texmf-dist/source/latex/etl/etl.dtx b/Master/texmf-dist/source/latex/etl/etl.dtx index 4c15f43c130..ae47931f40e 100644 --- a/Master/texmf-dist/source/latex/etl/etl.dtx +++ b/Master/texmf-dist/source/latex/etl/etl.dtx @@ -109,10 +109,11 @@ and the derived files etl.pdf % The \pkg{etl} package provides a few \emph{slow but expandable} alternatives % to unexpandable functions found inside the \pkg{l3tl} module of \pkg{expl3}. % All user functions must not contain the tokens \cs{s__etl_stop}\footnote{At -% any nesting level of groups} or \cs{__etl_act_result:n}\footnote{Outside of -% some local brace groups} in any argument unless specified otherwise (there -% might be other forbidden tokens, all of which are internals to this package, -% and usually shouldn't somehow end up inside the input stream by accident). +% any nesting level of groups} or \cs{__etl_act_result:n}\footnote{On the top +% level (so nested usages in groups are fine)} in any argument unless specified +% otherwise (there might be other forbidden tokens, all of which are internals +% to this package, and usually shouldn't somehow end up inside the input stream +% by accident). % % There is another limitation of this package: There are tokens which cannot % expandably be differentiated from each other, those are active characters let @@ -132,7 +133,10 @@ and the derived files etl.pdf % the parser doesn't consider the character code of tokens with category 1 or 2 % (group begin and group end, typically |{}|), instead all tokens found with % these two category codes are normalised to \texttt{\{\textsubscript{1}} and -% \texttt{\}\textsubscript{2}}. +% \texttt{\}\textsubscript{2}} (an exception to this rule are the functions +% \cs{etl_token_replace_once:nNn} and \cs{etl_replace_once:nnn} in which this +% normalisation is only done up to the replacement, and the rest of the input is +% forwarded unchanged). % % The core macro \cs{etl_act:nnnnnnn} is modelled after an internal of % \pkg{l3tl} called \cs{__tl_act:NNNn} but with some more possibilities added. @@ -160,9 +164,8 @@ and the derived files etl.pdf % expansion using \cs{exp_not:n}). Also you can specify some \meta{output} % which should be there from the beginning. % -% Functions without the argument \meta{output} will start with an empty -% output, and those without \meta{final} will just output the results at the -% end. +% Variants without the argument \meta{output} will start with an empty output, +% and those without \meta{final} will just output the results at the end. % % \begin{texnote} % The result is returned within \cs{exp_not:n}, which means that the token @@ -174,6 +177,9 @@ and the derived files etl.pdf % \end{texnote} % \end{function} % +% All other functions which start in |\etl_act_| should only be used inside the +% \meta{normal}, \meta{space}, or \meta{group} code of \cs{etl_act:nnnnnnn}. +% % \begin{function}[EXP]{\etl_act_output:n, \etl_act_output_pre:n} % \begin{syntax} % \cs{etl_act_output:n} \Arg{token list} @@ -181,8 +187,6 @@ and the derived files etl.pdf % This will add \meta{token list} to the output of \cs{etl_act:nnnnnnn}. The % normal version will add \meta{token list} after the current output, the % |pre| variant will put it before the current output. -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. % \end{function} % % \begin{function}[EXP]{\etl_act_output_rest:, \etl_act_output_rest_pre:} @@ -192,9 +196,12 @@ and the derived files etl.pdf % After this macro was used all remaining things inside the \meta{token list} % argument of \cs{etl_act:nnnnnnn} will be added to the output. The normal % version will add it to the end of the output, the |pre| variant will put the -% remainder before the current output in reversed order. -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. +% remainder before the current output in reversed order. Any begin group and +% end group tokens inside \meta{token list} will be normalised by this. A +% faster alternative (that doesn't normalise) would be +% \begin{verbatim} +% \etl_act_apply_to_rest:n { \etl_act_break_post:n } +% \end{verbatim} % \end{function} % % \begin{function}[EXP]{\etl_act_status:n} @@ -203,8 +210,6 @@ and the derived files etl.pdf % \end{syntax} % This will change the current status of \cs{etl_act:nnnnnnn} to % \meta{status}. -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. % \end{function} % % \begin{function}[EXP]{\etl_act_put_back:n} @@ -214,8 +219,6 @@ and the derived files etl.pdf % You can put \meta{token list} back into the input stream to be reconsidered % by the current \cs{etl_act:nnnnnnn} loop (of course this doesn't have to be % literally put back, you might add completely new contents with this). -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. % \end{function} % % \begin{function}[EXP] @@ -231,8 +234,19 @@ and the derived files etl.pdf % \end{syntax} % With these functions you can change the provided code to act on % \meta{normal} (so |N|-type) tokens, \meta{space}s, and \meta{group}s. -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. +% \end{function} +% +% \begin{function}[EXP]{\etl_act_apply_to_rest:n} +% \begin{syntax} +% \cs{etl_act_apply_to_rest:n} \Arg{code} +% \end{syntax} +% This will fetch the rest of the input \meta{token list} of the current +% \cs{etl_act:nnnnnnn} call and leave \meta{code}\Arg{rest} in the input +% stream (without brace normalisation). It will not end the current +% \cs{etl_act:nnnnnnn} loop (but since the \meta{token list} remainder is now +% empty it'll end after your \meta{code} is done, except if you put new +% contents in the list using \cs{etl_act_put_back:n}) nor affect it in any +% other way. % \end{function} % % \begin{function}[EXP]{\etl_act_do_final:} @@ -244,8 +258,6 @@ and the derived files etl.pdf % \meta{final} code was used, the output). The \meta{final} code will receive % the current status followed by the current output as two arguments (just % like it would when the end of the \meta{token list} was reached). -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. % \end{function} % % \begin{function}[EXP]{\etl_act_break:, \etl_act_break_discard:} @@ -255,8 +267,6 @@ and the derived files etl.pdf % This will immediately stop the current \cs{etl_act:nnnnnnn} invocation and % leave the current output in the input stream. The |discard| variant will % gobble the current output and leave nothing in the input stream. -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. % \end{function} % % \begin{function}[EXP]{\etl_act_break:n} @@ -265,8 +275,6 @@ and the derived files etl.pdf % \end{syntax} % This will immediately stop the current \cs{etl_act:nnnnnnn} invocation, % gobble the current output and leave \meta{token list} in the input stream. -% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group} -% code of \cs{etl_act:nnnnnnn}. % \end{function} % % \begin{function}[EXP]{\etl_act_break_pre:n, \etl_act_break_post:n} @@ -280,6 +288,119 @@ and the derived files etl.pdf % \end{function} % % +% \subsubsection{Examples} +% +% To give examples how you could use \cs{etl_act:nnnnnnn} the following could +% be used to reimplement \cs{tl_reverse:n}. We work with a bit of currying here +% (this gives a small speed gain in general, though for code clarity you might +% decide to not curry each and every argument). Since a reversing function +% doesn't need to postprocess its output we can use the shorter +% \cs{etl_act:nnnnn}. The three internal functions all need to gobble the +% status. +% +% \begin{verbatim} +% % argument #2 is curried +% \cs_new:Npn \__my_reverse_normal:nN #1 { \etl_act_output_pre:n } +% \cs_new:Npn \__my_reverse_space:n #1 { \etl_act_output_pre:n { ~ } } +% \cs_new:Npn \__my_reverse_group:nn #1#2 { \etl_act_output_pre:n { {#2} } } +% % argument #1 is curried +% \cs_new:Npn \my_reverse:n +% { +% \etl_act:nnnnn +% \__my_reverse_normal:nN +% \__my_reverse_space:n +% \__my_reverse_group:nn +% {} % empty status +% } +% \end{verbatim} +% +% We could also create a similar function that'll reverse the input up to the +% first space and discard the remainder (no idea why somebody would want to do +% that). +% +% \begin{verbatim} +% % argument #1 is curried +% \cs_new:Npn \my_reverse_discard_after_space:n +% { +% \etl_act:nnnnn +% \__my_reverse_normal:nN +% \etl_act_break: +% \__my_reverse_group:nn +% {} % empty status +% } +% \end{verbatim} +% +% Or a function that reverses the contents of groups as well. +% +% \begin{verbatim} +% \cs_generate_variant:Nn \etl_act_output_pre:n { e } +% \cs_new:Npn \__my_reverse_group_reversed:nn #1#2 +% { \etl_act_output_pre:e { { \my_reverse_deep:n {#2} } } } +% % argument #1 is curried +% \cs_new:Npn \my_reverse_deep:n +% { +% \etl_act:nnnnn +% \__my_reverse_normal:nN +% \__my_reverse_space:n +% \__my_reverse_group_reversed:nn +% {} % empty status +% } +% \end{verbatim} +% +% Another function could count a specific token inside a token list. Since for +% this neither output-reordering nor post processing is needed we shortcut by +% not using \cs{etl_output:n} but instead directly leaving |+ \c_one_int| (which +% also doesn't need to be protected against further expansion) in the input. +% +% \begin{verbatim} +% \cs_new:Npn \__my_count_token:NN #1#2 +% { \etl_token_if_eq:NNT #1#2 { + \c_one_int } } +% \cs_new:Npn \my_count_token:Nn #1#2 +% { +% \int_eval:n +% { +% \c_zero_int +% \etl_act:nnnnn +% \__my_count_token:NN +% \use_none:n +% \use_none:nn +% {#1} +% {#2} +% } +% } +% \end{verbatim} +% +% As a last example we reimplement the \cs{etl_token_replace_once:nNn} function. +% The function doesn't need to reorder any tokens, so we shortcut with +% \cs{exp_not:n} to output things in place. We put the token we want to replace +% in the code for |N|-type processing and the replacement in the status. When we +% found the token we want to replace we put our replacement there and output the +% rest unaltered. +% +% \begin{verbatim} +% \cs_new:Npn \my_replace_token:nNn #1#2#3 +% { +% \etl_act:nnnnn +% { \__my_replace_token:NnN #2 } +% { ~ \use_none:n } +% { \__my_replace_token:nn } +% {#3} +% {#1} +% } +% \cs_new:Npn \__my_replace_token:nn #1#2 { { \exp_not:n {#2} } } +% \cs_new:Npn \__my_replace_token:NnN #1#2#3 +% { +% \etl_token_if_eq:NNTF #1#3 +% { \exp_not:n {#2} \etl_act_apply_to_rest:n { \etl_act_break:n } } +% { \exp_not:N #3 } +% } +% \end{verbatim} +% +% I hope this gave you at least an idea on how to use the loop and that the +% explanations on the functions not used in these examples suffice to also give +% you an idea on how to use them. +% +% % \subsection{Conditionals}\label{sec:conditionals} % % \begin{function}[pTF]{\etl_token_if_eq:NN} @@ -293,18 +414,6 @@ and the derived files etl.pdf % \cs{str_if_eq:nnTF} is true). % \end{function} % -% \begin{function}[pTF]{\etl_if_eq:nn} -% \begin{syntax} -% \cs{etl_if_eq_p:nn} \Arg{token list_1} \Arg{token list_2} -% \cs{etl_if_eq:nnTF} \Arg{token list_1} \Arg{token list_2} \Arg{true code} \Arg{false code} -% \end{syntax} -% Compares \meta{token list_1} and \meta{token list_2} with each other on a -% token-by-token basis. Keep in mind that there are tokens which can't be told -% apart from each other, and that groups are normalised. If both token lists -% match (modulo the mentioned limitations) the \meta{true code} is left in the -% input stream, else the \meta{false code}. -% \end{function} -% % \begin{function}[pTF]{\etl_token_if_in:nN} % \begin{syntax} % \cs{etl_token_if_in_p:nN} \Arg{token list} \meta{token} @@ -324,6 +433,18 @@ and the derived files etl.pdf % searched as well. % \end{function} % +% \begin{function}[pTF]{\etl_if_eq:nn} +% \begin{syntax} +% \cs{etl_if_eq_p:nn} \Arg{token list_1} \Arg{token list_2} +% \cs{etl_if_eq:nnTF} \Arg{token list_1} \Arg{token list_2} \Arg{true code} \Arg{false code} +% \end{syntax} +% Compares \meta{token list_1} and \meta{token list_2} with each other on a +% token-by-token basis. Keep in mind that there are tokens which can't be told +% apart from each other, and that groups are normalised. If both token lists +% match (modulo the mentioned limitations) the \meta{true code} is left in the +% input stream, else the \meta{false code}. +% \end{function} +% % \begin{function}[pTF]{\etl_if_in:nn} % \begin{syntax} % \cs{etl_if_in_p:nn} \Arg{token list} \Arg{search text} @@ -334,9 +455,8 @@ and the derived files etl.pdf % code}. Both macro parameter tokens as well as tokens with category code~1 % and 2 (normally |{}|) can be part of \meta{search text} (unlike for the % similar function \cs{tl_if_in:nnTF}). Material inside of groups in -% \meta{token list} is ignored (except for the groups contained in -% \meta{search text}). So the following would first yield |true| and then -% |false|: +% \meta{token list} is ignored (except for groups contained in \meta{search +% text}). So the following would first yield |true| and then |false|: % \end{function} % \begin{verbatim} % \etl_if_in:nnTF { a{b{c}} } { {b{c}} } { true } { false } @@ -564,7 +684,7 @@ and the derived files etl.pdf % Tell who we are: % \begin{macrocode} \ProvidesExplPackage{etl} - {2021-08-28} {0.2} + {2021-11-07} {0.3} {expandable token list manipulation} % \end{macrocode} % @@ -603,18 +723,6 @@ and the derived files etl.pdf % % \subsection{Small auxiliaries} % -% \begin{macro}[EXP]{\@@_if_mark:nTF,\@@_if_mark:w,\@@_if_mark_true:w} -% A small check whether some argument contains the scan mark \cs{s_@@_mark}, -% the mark should always be the last token of the argument (and only a single -% such mark should be contained) to ensure correct behaviour. -% \begin{macrocode} -\cs_new:Npn \@@_if_mark:nTF #1 - { \@@_if_mark:w #1 \@@_if_mark_true:w \s_@@_mark \use_ii:nn } -\cs_new:Npn \@@_if_mark:w #1 \s_@@_mark {} -\cs_new:Npn \@@_if_mark_true:w \s_@@_mark \use_ii:nn #1#2 {#1} -% \end{macrocode} -% \end{macro} -% % \begin{macro}[EXP]{\@@_split_first:w} % Can be used to extract the first element from a token list, it should always % be used like this: @@ -732,15 +840,14 @@ and the derived files etl.pdf % \end{macrocode} % We also provide a version without the \cs{@@_unexpanded:w} around it for % internal purposes, in which we'd otherwise have to remove it for correct -% behaviour. +% behaviour. For that we use \cs{use_ii_iii:nnn} which will remove one set +% of braces and the \cs{@@_unexpanded:w}. % \begin{macrocode} -\cs_new:Npn \@@_act:nnnnnnn #1#2#3#4#5#6#7 +\exp_args:NNno \exp_args:Nno \use:n + { \cs_new:Npn \@@_act:nnnnnnn #1#2#3#4#5#6#7 } { - \@@_expanded:w - { - \@@_act:w #7 {\s_@@_stop} . \s_@@_stop {#5} {#1} {#2} {#3} - \@@_act_result:n {#6} {#4} - } + \exp_after:wN \use_ii_iii:nnn + \etl_act:nnnnnnn {#1} {#2} {#3} {#4} {#5} {#6} {#7} } % \end{macrocode} % We also provide two reduced function variants, the first without presetting @@ -921,6 +1028,45 @@ and the derived files etl.pdf % \end{macro} % \end{macro} % +% \begin{macro}[EXP] +% { +% \@@_act_unexpanded_rest:w, +% \@@_act_unexpanded_rest_aux:w, \@@_act_unexpanded_rest_aux:n, +% \@@_act_unexpanded_rest_done:w +% } +% This function tries to shortcut as much as possible to output the +% remainder of the token list in an unchanged way. This can be done by +% grabbing everything up to the next opening brace (since the stop marker is +% contained in a group), outputting that, and checking whether we're done. If +% not output the next group and loop. The first step removes the act code. +% +% Drawback of this is that spaces and braces are not normalised for the +% remainder of that call (which is what we had documented). +% \begin{macrocode} +\cs_new:Npn \@@_act_unexpanded_rest:w #1 \@@_act:w #2# + { + \@@_unexpanded:w {#2} + \@@_act_unexpanded_rest_aux:n + } +\cs_new:Npn \@@_act_unexpanded_rest_aux:w #1# + { + \@@_unexpanded:w {#1} + \@@_act_unexpanded_rest_aux:n + } +\cs_new:Npn \@@_act_unexpanded_rest_aux:n #1 + { + \@@_act_if_end:w #1 \@@_act_unexpanded_rest_done:w \s_@@_stop + { \@@_unexpanded:w {#1} } + \@@_act_unexpanded_rest_aux:w + } +\cs_new:Npn \@@_act_unexpanded_rest_done:w + \s_@@_stop #1 \@@_act_unexpanded_rest_aux:w + . \s_@@_stop #2#3#4#5 + \@@_act_result:n #6#7 + {} +% \end{macrocode} +% \end{macro} +% % \begin{macro}[EXP]{\etl_act_status:n} % Just switch out the status which is stored immediately after \cs{s_@@_stop}. % \begin{macrocode} @@ -964,6 +1110,7 @@ and the derived files etl.pdf { #2 \s_@@_stop {#3} {#4} {#5} {#1} } % \end{macrocode} % \end{macro} +% % \begin{macro}[EXP] % { % \etl_act_do_final:, @@ -990,6 +1137,66 @@ and the derived files etl.pdf % \end{macrocode} % \end{macro} % +% \begin{macro}[EXP]{\etl_act_apply_to_rest:n} +% This function can be used to get the remainder of the input \meta{token +% list} and apply some user code on it. To get past the user code we use +% \cs{@@_expanded:w} with a brace trick. The heavy lifting is done by +% \cs{@@_act_get_rest:w}. The \cs{prg_do_nothing:} prevents accidental brace +% stripping and will be removed by \cs{@@_act_get_rest:w}. +% \begin{macrocode} +\cs_new:Npn \etl_act_apply_to_rest:n #1 + { + \@@_expanded:w { \@@_unexpanded:w {#1} { \if_false: }} \fi: + \@@_act_get_rest:w \prg_do_nothing: + } +% \end{macrocode} +% \end{macro} +% +% \begin{macro}[EXP]{\@@_act_get_rest:w} +% This macro should be used with two unbalanced opening braces before it and +% inside an \cs{@@_expanded:w} context with a \cs{prg_do_nothing:} following +% it to prevent accidental brace stripping. It'll expand to the remainder of +% the input \meta{token list} followed by a closing brace and leaves +% everything else untouched. +% \begin{macro}[EXP] +% {\@@_act_get_rest_aux:nw, \@@_act_get_rest_aux:nn, \@@_act_get_rest_done:w} +% \begin{macrocode} +\cs_new:Npn \@@_act_get_rest:w #1 \@@_act:w #2# + { + \@@_unexpanded:w {#2} + \@@_act_get_rest_aux:nn {#1} + } +\cs_new:Npn \@@_act_get_rest_aux:nw #1 #2# + { + \@@_unexpanded:w {#2} + \@@_act_get_rest_aux:nn {#1} + } +% \end{macrocode} +% Each group might be the end marker, so we check that, else leave the group +% there and grab until the next group starts. +% \begin{macrocode} +\cs_new:Npn \@@_act_get_rest_aux:nn #1#2 + { + \@@_act_if_end:w #2 \@@_act_get_rest_done:w \s_@@_stop + { \@@_unexpanded:w {#2} } + \@@_act_get_rest_aux:nw {#1} + } +% \end{macrocode} +% This closes the two unbalanced opening braces (ending the \cs{@@_expanded:w} +% context) and puts the remaining code back in the input stream (as well as +% the now empty next \cs{@@_act:w} step). The \cs{exp_after:wN} removes the +% leading \cs{prg_do_nothing:}. +% \begin{macrocode} +\cs_new:Npn \@@_act_get_rest_done:w \s_@@_stop #1 \@@_act_get_rest_aux:nw #2 + { + \if_false: {{ \fi: } \exp_after:wN } + #2 + \@@_act:w { \s_@@_stop } + } +% \end{macrocode} +% \end{macro} +% \end{macro} +% % % \subsection{Expandable tests} % @@ -1359,7 +1566,7 @@ and the derived files etl.pdf % % \begin{macro}[EXP]{\etl_token_replace_all:nNn} % \begin{macro}[EXP]{\@@_token_replace:NnnN} -% Replaceing a single token (and in fact the same is true for all the +% Replacing a single token (and in fact the same is true for all the % replacement actions in this package) doesn't need reordering and no post % processing, so we can use in place output using \cs{@@_unexpanded:w}. We % store the token we want to replace inside the act function, as well as an @@ -1418,10 +1625,7 @@ and the derived files etl.pdf \exp_args:Nno \use:n { \cs_new:Npn \etl_token_replace_once:nNn #1#2#3 } { \etl_act:nnnnnn - { - \@@_token_replace:NnnN #2 - { \etl_act_switch_normal:n \@@_act_unexpanded_normal:nN } - } + { \@@_token_replace:NnnN #2 \@@_act_unexpanded_rest:w } \@@_act_unexpanded_space:n \@@_act_unexpanded_group:nn \use_none:nn @@ -1458,7 +1662,7 @@ and the derived files etl.pdf % the remainder of the pattern, the full pattern, delayed tokens (those % which matched the pattern), the replacement, and a marker which should tell % us whether we want to only replace the first match (if so use -% \cs{s_@@_mark}, else any other single token). +% \cs{@@_act_unexpanded_rest:w}, else \cs{prg_do_nothing:}). % \begin{macrocode} \exp_args:Nno \use:n { \cs_new:Npn \etl_replace_all:nnn #1#2#3 } { @@ -1467,7 +1671,7 @@ and the derived files etl.pdf \@@_replace_space:n \@@_replace_group:nn \@@_replace_final:nn - { {#2} {#2} {} {#3} \scan_stop: } + { {#2} {#2} {} {#3} \prg_do_nothing: } {#1} } % \end{macrocode} @@ -1524,15 +1728,8 @@ and the derived files etl.pdf \@@_if_empty:nTF {#2} { \@@_unexpanded:w {#5} - \@@_if_mark:nTF {#6} - { - \etl_act_switch:nnn - \@@_act_unexpanded_normal:nN - \@@_act_unexpanded_space:n - \@@_act_unexpanded_group:nn - \etl_act_status:n { {} {} {} {} #6 } - } - { \etl_act_status:n { {#3} {#3} {} {#5} #6 } } + #6 + \etl_act_status:n { {#3} {#3} {} {#5} #6 } } { \etl_act_status:n { {#2} {#3} { #4 #7 } {#5} #6 } } } @@ -1561,15 +1758,8 @@ and the derived files etl.pdf \@@_if_empty:nTF {#1} { \@@_unexpanded:w {#4} - \@@_if_mark:nTF {#5} - { - \etl_act_switch:nnn - \@@_act_unexpanded_normal:nN - \@@_act_unexpanded_space:n - \@@_act_unexpanded_group:nn - \etl_act_status:n { {} {} {} {} #5 } - } - { \etl_act_status:n { {#2} {#2} {} {#4} #5 } } + #5 + \etl_act_status:n { {#2} {#2} {} {#4} #5 } } { \etl_act_status:n { {#1} {#2} { #3 ~ } {#4} #5 } } } @@ -1598,15 +1788,8 @@ and the derived files etl.pdf \@@_if_empty:nTF {#2} { \@@_unexpanded:w {#5} - \@@_if_mark:nTF {#6} - { - \etl_act_switch:nnn - \@@_act_unexpanded_normal:nN - \@@_act_unexpanded_space:n - \@@_act_unexpanded_group:nn - \etl_act_status:n { {} {} {} {} #6 } - } - { \etl_act_status:n { {#3} {#3} {} {#5} #6 } } + #6 + \etl_act_status:n { {#3} {#3} {} {#5} #6 } } { \etl_act_status:n { {#2} {#3} { #4 {#7} } {#5} #6 } } } @@ -1640,7 +1823,7 @@ and the derived files etl.pdf \@@_replace_space:n \@@_replace_group_deep:nn \@@_replace_final:nn - { {#2} {#2} {} {#3} \scan_stop: } + { {#2} {#2} {} {#3} \prg_do_nothing: } {#1} } \cs_new:Npn \@@_replace_group_deep:nn #1 @@ -1691,7 +1874,7 @@ and the derived files etl.pdf % % \begin{macro}[EXP]{\etl_replace_once:nnn} % And this is the same as the |all| variant except that we now use the -% \cs{s_@@_mark} marker inside the status. +% \cs{@@_act_unexpanded_rest:w} marker inside the status. % \begin{macrocode} \exp_args:Nno \use:n { \cs_new:Npn \etl_replace_once:nnn #1#2#3 } { @@ -1700,7 +1883,7 @@ and the derived files etl.pdf \@@_replace_space:n \@@_replace_group:nn \@@_replace_final:nn - { {#2} {#2} {} {#3} \s_@@_mark } + { {#2} {#2} {} {#3} \@@_act_unexpanded_rest:w } {#1} } % \end{macrocode} @@ -1909,6 +2092,12 @@ and the derived files etl.pdf % \end{macro} % \end{macro} % +% \subsection{Undefine now unnecessary functions} +% +% \begin{macrocode} +\cs_undefine:N \@@_act:nnnnnnn +% \end{macrocode} +% % \begin{macrocode} %</pkg> % \end{macrocode} |