diff options
Diffstat (limited to 'Master/texmf-dist/source/fontinst/base/CHANGES')
| -rw-r--r-- | Master/texmf-dist/source/fontinst/base/CHANGES | 644 |
1 files changed, 644 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/fontinst/base/CHANGES b/Master/texmf-dist/source/fontinst/base/CHANGES new file mode 100644 index 00000000000..481d5f3a34d --- /dev/null +++ b/Master/texmf-dist/source/fontinst/base/CHANGES @@ -0,0 +1,644 @@ +--- CHANGES --- + +This is the changes log for the fontinst font installation package. + +Feb 4 1993, v0.01: Created the file, wrote an afm and enc parser, + started on a vpl writer. + +Feb 10 1993, v0.02: Rewrote the enc parser, generally hacked around, + imported trig.tex to convert Adobe's italic slope (expressed in + angles!) into a font dimension (expressed as a ratio!) grrrrrr... + +Feb 12 1993, v0.03: Tidied up the comments a bit, moved the + \fontlist out of \readafm, added \writepl (as well as \writevpl). + Replaced \fake{CHARACTER} by having the .fd file give default + definitions for \char-CHARACTER. Added the \map and + \ligtable entries to \char-CHARACTER. Redefined \ligtable, + \map and \codingscheme as token lists. Moved the \kernpair's + into \ligtable. + +Feb 16 1993, v0.04: Added FontName, FullName, UnderlineThickness and + Notice. Added the source font encodings, and MAPFONT. + Discovered a seriousish bug---if a character exists in the afm + file but is not in the source encoding, then the fake character + is still overwritten, since we don't know what the source + encoding is going to be until later. Fixed this by reading in + the source encoding first, and looking to see if there is a + character in the source encoding for the one in the afm file. + Added \topaccent. + +17 Feb 1993, v0.05: Added the visual centre parameter to \topaccent, + and added \botaccent and \doublechar. Fixed a bug where the + default \missingchar had a horizontal rather than a vertical + rule. Added \settoken. + +19 Feb 1993, v0.06: Fixed a bug whereby a character which was in the + source encoding but not in the afm file overwrote it's faked + version. Changed the default \missingchar to be independent of + the values parsed from the afm file (so it doesn't matter when + you set a \missingchar). Added \parameter and \ligatures. Added + \kernalikes and \copykern, which meant I had to split \ligtable + back into \ligtable and \kerntable, since when you say \copykern + you only want the \kerntable copied, not the \ligtable. + Redefined \map so that it's more portable---the contents of \map + are allowed to assume they start in font \startfont, should move + and should finish having moved right by \charwd and in font + \stopfont. This makes it possible to have composite characters + within composite characters---for example to make <ffi> out of + <f><fi> and <fi> is in turn made out of <f><i>. + +23 Feb 1993, v0.07: Introduced the \character token list (previously + all of the variables had been set by \char-FOO). \botaccent, + \topaccent, etc are now commands to be used inside \defchar, so + you can say something like \defchar{FOO}{\ifblah ... \botaccent + ... \else ... \topaccent ... \fi}. Added \cramchar. Added + the shift-left argument to \doublechar. + +24 Feb 1993, v0.08: Replaced \charic by \leftbearing and + \rightbearing. Made the assingments in a \char-FOO command + global, so we can protect local variables. Fixed a bug with + \getchar{FOO} which used to end up calling \the\character. + However, \the\character may contain other \getchar{BAZ} calls, + which will override the values of \kernalike, \source, \target, + etc. So \getchar can't call \the\character. Added \shrinkfont. + Made all the AFM variables counts rather than dimens. Added + \afmunits, and did all the conversion between AFM units and TeX + units as late as possible (which means we can alter \afmunits + locally and perform scaling). Added \getfont so fonts are now + loaded dynamically, and can be scaled. Added \shrinkchar for + producing c&sc fonts. + +3 Mar 1993, v0.09: Added \fractionchar, \inferiorchar and + \superiorchar. No character is produced for characters called + .notdef in the target encoding. Produced a first bash at a + complement encoding to Cork, containing the Adobe standard and + Expert characters missing from Cork. + +9 Mar 1993, v0.10: A major spring clean. Introduced ATX and ETX + files, so the parser for AFM files now reads an AFM file and writes + out the same information in a TeX-friendly fashion as an ATX file. + Similarly, an ETX file contains the same information as an ENC file. + Introduced \inputatx, \inputetx and \inputenc to input an ATX, ETX + or ENC file if it already exists and to make it otherwise. + +14 Mar 1993, v0.11: A continuation of the spring clean. Redefined + \getchars to define everything locally. Redefined \writechars to + read the encoding from a .etx file. Discovered I'd used the command + \afmchar twice(!) so I redefined one of them to be \rawchar. + Rewrote the LIGTABLE section. + +15 Mar 1993, v0.12: Finished the spring clean of the file generation. + Redid \writevpl and \writepl. Read the FUD file in after the ATX + files, so the FUD file can use the parameters read in by the ATX + file. Fixed a bug with \afmchar that wrote incorrect values + to \charactersize in the ATX file. Rewrote \fontdimens to write the + PARAMETERs out immediately (since we are now writing the VPL file + when reading the FUD file). Finished the LIGTABLE section, redid + \copykern. + +22 Mar 1993, v0.13: Rewrote the generation of ATX files, so kern table + information is gathered together as in a LIGTABLE. Renamed + \defchars to \readafm. Renamed \writevpl to \makevpl ... \endvpl, + and rewrote it to cope with the new syntax of ATX files. + +24 Mar 1993, v0.14: Added \lkern and \rkern entries to ATX files, + replacing \copykern. Added kern copying to LIGTABLEs. + +29 Mar 1993, v0.15: Added \boundarychar, \nextlarger and \varchar. + Fixed a bug with \lrkern. + +30 Mar 1993, v0.16: Fixed a bug whereby FONTDIMENS was being output + rather than FONTDIMEN. Also \writepl was generating a VPL file. + And I discovered a bug with dvips that means that fonts generated + with designsize and designunits R 9.9945 cause a rounding error + and dvips complains about a design size mismatch. Grr... Fixed + a bug with outputting ligatures for characters without + kernings---previously I output a LABEL without checking that + there were actually going to be any LIG instructions (which there + might not be if, for example, it was a monoweight font). + +4 Apr 1993, v0.17: Added the interactive prompt. Generated the .fd + file. \makevpl and \makepl don't overwrite files any + longer---they give a message saying `FILENAME.(v)pl already + exists.' + +17 Apr 1993, v0.18: Added \makefamily, \maketexfont and \makerawfont. + +27 Apr 1993, v0.19: Fixed a bug with \finishligs, which caused + multiple LABEL instructions to be put down (I had a \labelfalse + where I should have had a \labeltrue). + +4 Aug 1993, v1.00: Ripped it up and started again... v1.00 is going + to be a fairly complete rewrite from the ground up. I can keep: + + * the AFM parser + * the ENC parser + * much of the VPL and PL writer + + but the fud engine is going to be replaced by the notion of a + glyphbase. The idea will be that all of the information kept in + the ATX and FUD files will be put into one file called a + `glyphbase'. Then we'll have two utilities: + + * \makerawfont{ENCODING}{AFMFILE}{FONTNAME} + will convert an AFM file into a glyphbase and a property list. + + * \maketexfont{ENCODING}{GLYPHBASES}{FONTNAME} + will convert a collection of glyphbases into a virtual font. + + For example: + + \makerawfont{adobe}{Times-Roman}{ptmr0} + \maketexfont{T1ulc}{ptmr0,cork}{ptmrq} + + makes the raw font ptmr0.pl, the glyphbase ptmr0.gly, and then + converts the glyphbases ptmr0 and cork into the font ptmrq. This + notion of glyphbase will also allow users to modify fonts easily, + for example you could write a little ptmhax glyphbase, which + would override the default cork glyphbase by saying: + + \maketexfont{T1ulc}{ptmr0,ptmhax,cork}{ptmrq} + + This will make it much easier to tweak fonts. I'll also specify + the glyphbase syntax, and do my best to make everything upwardly + compatible. + + On the 4th of August I started on the above. I wrote + \makeglyphbase, which converts an AFM file into a glyphbase, and + I wrote the glyphbase commands to store the glyphbase information + in TeX. The main thing that's missing is the PL and VPL writers, + and the ligature, nextlarger and varchar entries. + +10 Aug 1993, v1.01: Edited trig.tex to remove uses of \then. Separated + \maketexfont into \inputglyphbase and \makevirtualfont. Added the + ability to write CHARACTER instructions, (OK, but not the MAPFONTs + yet). + +11 Aug 1993, v1.02: Only output CHARDP, CHARHT and CHARIC when they + are positive. Added the MAPFONT and \mapfont instructions. + +12 Aug 1993, v1.03: Corrected a bug where I was calling \inputetx + *after* an \openout\outfile, which caused the \outfile to be closed, + if the etx file had to be generated. + +22 Aug 1993, v1.04: Added the concept of variable and number expression. + Included trig.tex as part of this file. Changed design size to an + integer. Renamed `glyphbase' to `metric file', and changed the + syntax of ETX files. Only write out SELECTFONT instructions when + necessary. + +23 Aug 1993, v1.05: Added the font dimensions. + +24 Aug 1993, v1.06: Made the slot of each glyph an int variable like + any other. Added dim variables. Made designsize a dim variable, + which should cure a bug that was causing design sizes not to match + up. Added the LIGTABLE. Fixed a bug with \inputetx and \inputmtx + which caused the redefinition of \relax to survive past the + \inputFOO command. Fixed a bug with \vplrule, since I'd got the + arguments to SETRULE the wrong way round (again!). + +25 Aug 1993, v1.07: Added the VARCHAR and NEXTLARGER entries. Added + the encoding documentation commands. Renamed the file to + fontinst.sty. + +26 Aug 1993, v1.08: Added the documentation of MTX files. + +27 Aug 1993, v1.09: Corrected a bug with \comment. Added \tfmtomtx. + Removed the SCALE argument to \setrawglyph. Added \convertafm to + convert integer AFM units to a dimen, trying to minimize rounding + errors whilst avoiding rounding errors. Renamed \leftkerning and + \rightkerning to \setleftkerning and \setrightkerning. + +30 Aug 1993, v1.10: Added \resetwidth, \resetheight, \resetdepth and + \resetitalic. Added the ability to use \width{GLYPH} etc. inside + \setglyph{GLYPH}. Added everyglyph and everyendglyph. + +10 Sep 1993, v1.11: Discovered a bug with the VPL glyphs which was + causing it never to write out a SELECTFONT instruction. + +13 Sep 1993, v1.12: Added the \familyinst...\endfamilyinst commands. + Added commands to zero the fonts between calls of \makefont, so + one document can make a large number of fonts. + +14 Sep 1993, v1.13: FIRST ALPHA-RELEASE OF V1. + Changed the syntax of \useafm and \useetx to use + the same parameters as LaTeX NFSS. Removed the prefix f0 from + the beginning of the font names, in a pathetic attempt to fit + MS-DOS 8+3 filenames. Added the \tempfile command. + +4 Oct 1993, v1.14: Removed a spurious \let in \docnextslot. Thanks + to Damian Cugley for spotting that one. Added \usetfm to \familyinst. + +5 Oct 1993, v1.15: Fixed a bug with \dotfm, which was causing it to + generate a PL file, even though the font was already in TFM + format! Thanks again to Damian. Also changed + \let\Input=\@@input to a catcode hack, just in case fontinst.sty + is read in by LaTeX when @ isn't a letter. That one was spotted + by Paul Thompson. + +6 Oct 1993, v1.16: Replaced Phil Taylor's trig macros with David + Carlisle's. Added the PL parser. Fixed a bug with the bug fix + for \dotfm, where I'd removed an \inputmtx command that was + needed... And I fixed a bug which was causing the VPL files to + be generated once for each font that contributed to the VPL file. + Damian got those ones as well. + +11 Oct 1993, v1.17: Added the SIZE argument to \useafm and \usepl, + and redid the FD generation to use the size info. This should + allow fonts like Malvern to be generated at different design + sizes and still have a sensible FD file. NOTE: This means old + fontinst files will no longer work! I also made \pltomtx create + a \setdim{designsize} command. + +13 Oct 1993, v1.18: Fixed a bug with \calculateitslant which caused + it to bomb if the italic angle didn't have a decimal... this was + caused by allowing extraneous spaces at the end of the angle. + These have now been stripped away. Thanks to Paul Thompson for + spotting that one! + +15 Oct 1993, v1.19: Discovered a bug with \familyinst, which caused + only one ETX file to be loaded. This one was introduced when I + added the SIZE arguments, since I reorganized the main + \endfamilyinst loop. Serves me right! This is now fixed, but + I'm left with the problem that the sensible order to generate VPL + files is not the sensible order to generate FD lines in. FD + files need the SIZE parameter inside the SERIES and SHAPE, + whereas if a font is contributing to a number of SERIES and + SHAPEs but only one SIZE, then it's sensible to have it outside + the SERIES and SHAPE parameters. Oh dear... + +19 Oct 1993, v1.20: Added the glyph `missingglyph' which is produced + whenever a glyph is missing. + +3 Nov 1993, v1.21: Corrected a bug with \kerning, which was causing + \kerning{A}{V} to give the kerning between V and A! And I added + the PL names for the math font parameters NUM1--AXISHEIGHT. + Damian spotted those ones. Rewrote the main loop as I said I + would have to in the note on v1.19, so there's no useless + regeneration of fonts now. + +17 Nov 1993, v1.22: Restored the final parameter to + \DeclareFontShape which had disappeared somehow! Rob Hutchings + spotted this one. And I stopped trying to be clever about + checking to see if a glyph has been defined before using it. + This means you get a horrible error message if you try to use an + undeclared glyph, but hey ho. Trying to trap this has caused so + many problems with other things breaking that I think I'll give + up :-) Added the \glyphwarning command, and removed the + `missingglyph' glyph. Docstripped David's trig.doc into + trig.sty, so I don't have to worry about trig.doc generating the + trig.sty file. Saved the catcodes of ` ', `@', `~' `_' and NL so I + so I can use @ and _ for internal macro names, space and NL + for ignored white space, and ~ for `real' white space. Renamed + all the internal commands (apart from the documentation ones) to + have _ in their names. + +29 Nov 1993, v1.23: Added a check that a glyph exists before writing + it to a (V)PL file... this was causing fontinst to crash if there + was a glyph missing from an AFM file. Yannis Haralambous and Paul + Thompson spotted this one. + +23 Dec 1993, v1.24: Removed the \familyinst...\endfamilyinst interface, + and replaced it by \installfonts ... \endinstallfonts, which makes + it easier to generate FD files that look like standard LaTeX2e FD + files. Removed (I'm not sure if this is a great idea) the ability + to specify an encoding for an AFM file, since I'm not sure every + dvi-to-ps converter can re-encode raw fonts. I added the + \declarefamily command to specify which encoding string corresponds + to which ETX file. + +24 Dec 1993, v1.25: Redid the \declare... commands, and replaced + everyglyh and everyendglyph by sidebearings. + +25 Dec 1993, v1.26: Drank a lot. + +26 Dec 1993, v1.27: Added \setcommand, \resetcommand and \ifiscommand. + +27 Dec 1993, v1.28: Bug-fixes in \setcommand and \resetcommand. Redid + \pltomtx so that it can read the encoding from the CODINGSCHEME line + in the file. Moved the documentation and tables into fontdoc and + fonttab.tex. + +28 Dec 1993, v1.29: Removed the fd-commands argument from \makefont, + since the FD syntax is to allow FD-commands dependent on + encoding/family/series/shape but not on size. This means we can't + generate font-specific FD-commands, but I've never seen those used, + so I'm not too worried... Fixed a bug with the CC commands, which + was producing a glyph with a different width than its horizontal + escapement, and I'm not sure what every DVI driver would do with + that. Replaced \etxtopl with \mtxtopl. Replaced the GLYPH COMMAND + \rawglyph with the MTX COMMAND \setrawglyph. + +29 Dec 1993, v1.30: Fixed a bug with \setrawglyph, which wasn't + checking to see if the glyph was already defined. Added + \unsetglyph. Corrected the spelling of `\immedaite' (sic) in + \vpl_nextlarger. + +3 Jan 1994, v1.301: The glyph warning message is now only produced when + the glyph is used, rather than when it is defined. And I've moved + over to three-digit version numbers, since I was going through the + two-digit ones quite rapidly. Added \bye, so fontinst documents can + run under LaTeX as well as plain TeX. Added \unsetint, \unsetstr, + \unsetdim and \unsetcommand. Renamed \makefont and \makefamily to + \installfont and \installfamily. + +4 Jan 1994, v1.302: Fixed a bug with the definition of \bye. + +6 Jan 1994, v1.303: Added the FONTNAME argument to \installfont. + Actually got rid of everyglyph. + +8 Jan 1994, v1.304: Added minimumkern and \resetglyph. Fixed a bug + with \vpl_kerning, which was swapping the left- and right-kerns. + Surprising I never spotted this before... + +9 Jan 1994, v1.305: Worked on the MTX and ETX files. + +10 Jan 1994, v1.306: Worked on the MTX and ETX files. + +12 Jan 1994, v1.307: Edited the documentation. + +20 Jan 1994, v1.308: Added the rawscale integer variable, and the + \setnotglyph command. Redid the way that CC instructions are + processed, to use the dimensions stored in the glyph-not variables. + Set all of the saved VPL commands to \relax so that they can be + \edef'ed on without having to protect them. Replaced some \def\foo{} + by \let\foo\empty_command's. Replaced a large definition that was + being made by \CHARACTER (when parsing PL files) by a \let. Redid + the datatype used to store kerning so it uses control sequences as a + compact representation of glyph names. All in all, fontinst now runs + in 79% of the time and 77% of the space that it did last week. + +21 Jan 1994, v1.309: Saved some more time and space on the kern table. + +22 Jan 1994, v1.310: Added the `FONT scaled AMOUNT', made \setkern take + account of \int{rawscale}. Moved the change log into a separate + CHANGES file. Redid \samesize and \resetwidth so that the width is + adjusted by a MOVERIGHT, so the glyph will have the correct horizontal + escapement. Corrected a typo which had renamed \resetint to \setint + (oops!). Corrected a typo of `itslant' rather than `italicslant'. + Added the \transformfont command and \mtxtomtx. Changed the + definition of \unfakable{foo} in latin.mtx to look to see if there's a + glyph <foo-not> to get the dimensions for. Added a fake <space> and a + fake <dotlessj> which is a missing glyph rule with the dimensions + combined from <j> and <dotlessi>. Changed the default interword + stretch to be 1/3 of interword space, rather than zero. Removed the + checks for the existence of <space> and <x> in OT1.etx and T1.etx, + since these are now faked in latin.mtx. Renamed the PS/CM math fonts, + after a discussion with Karl Berry, added the OMS and OMX math fonts. + Added the Greek letters, digits and other humanists to unsetalf.mtx. + Added the DEFAULTRULETHICKNESS and BIGOPSPACING commands to the PL + parser. Fixed a bug I'd introduced by giving \vartop, \varmid, + \varrep and \varbot no parameters. Oops. Created timesmat.sty and + testmath.tex. All in all, a reasonable day's work... + +23 Jan 1994, v1.311: Added some more tests to testmath.tex. Added the + new math sizes to timesmat.sty. Fixed a bug with fontstnd.tex which + was causing it to generate the wrong FD entry for italic fonts. Fixed + a bug with CHARACTER parsing in \pltomtx which wasn't resetting the + values of WIDTH, HEIGHT, DEPTH and CHARIC between glyphs. + +24 Jan 1994, v1.312: Added the SEVENBITSSAFE command to the PL parser. + +25 Jan 1994, v1.313: Restored the catcode of ~, which I'd left as 10. + Made /, < and > in zptmcmrm come from cmmi rather than ptmri. Added + zptmcmr to fontptcm.tex, which is Adobe Times with +, =, (, ), [ and ] + taken from CMR. This means that [...] and (...) in text is different + from in math, but means that the delimiters are the right size for + math setting with CM symbols, and match the growing delimiters in cmex. + Moved the files ptmcmhax.mtx and psycmhax.mtx to zrmhax.mtx and + zrvhax.mtx. + +27 Jan 1994, v1.314: Took the textstyle and displaystyle big operators + in zpsycmrv from cmex8 rather than cmex10, since they are more + suitably sized for the <summation> and <product> from Adobe Symbol. + Made all the accents in latin.mtx zero depth (which TeX's math accent + placement requires). Discovered that cmex8 doesn't have a + CODINGSCHEME, so I added one by hand to the PL file. + +30 Jan 1994, v1.315: Replaced cmex8 in zpsycmrv by cmex9. Added + <epsilon1>, <pi1> and <rho1> to unsethum.mtx. Added the \skewchar + declaration for zptmcmrm. Fixed a bug which was causing negative + mathchardefs. Finished off the skewchar kerns for zptcmrm. + Renamed timesmat.sty to mathptm.sty, since there's already a + timesmat.sty. + +7 Feb 1994, v1.316: Fixed the \ProvidesPackage line in mathptm.sty. + +8 Feb 1994, v1.317: Fixed a bug with fontptcm.tex where I'd put the + \skewchar command in the wrong argument! Made the `size' argument + to \installfont an FD size specification. Added fakes for <lslash> + and <Lslash> built from <lslashslash> to latin.mtx. Added a check + that a ligature glyph exists before writing out the LIGTABLE entry. + Edited the documentation a bit---thanks to Karl Berry for comments. + Added the fontcmro example, inspired by Norman Walsh. Fixed a bug + with .fd file generation which caused multiple \DeclareFontShape + entries to be produced. Added \unfakable{endash} and + \unfakable{emdash} to latin.mtx. Sebastian spotted that one. + +10 Feb 1994, v1.318: Added \unfakable{dotlessi} to latin.mtx. Karl + Berry pointed that one out. + +1 Mar 1994, v1.319: Added the HEADER. Karl Berry pointed that one out + too. + +6 Apr 1994, v1.320: Write out a LABEL BOUNDARYCHAR ligable entry where + necessary. Alan Hoenig pointed that one out. Rewrote mathptm.sty + to remove some of the nastier hacks. + +7 Apr 1994, v1.321: Added the ability to generate font substitutions + in the FD files. + +8 Apr 1994, v1.322: Fixed a bug with font substitution which was + causing the font substitutions to be written out before the real + fonts. Moved the mathptm package to standing on its own. + +17 Apr 1994, v1.323: Added the top-level \latinfamily commands, and + updated the example files and documentation to use them. Added + OT1ci.etx. Made the list of files in an \installfont command + expanded before running along the list, so you can have a macro + which expands out to a list of files now. Added substitutions for + semibold and demibold, for upright italic, and for sc to nc. Added + OT19.etx, OT1c9.etx, OT1ci9.etx, OT1i9.etx, T19.etx and T1c9.etx. + Removed OT1o.etx. + +19 Apr 1994, v1.324: Removed italic and oblique small caps. Fixed a + bug which was causing the latin.mtx file to be read in inside a + group if a latin family without an expert font was created. + +25 Apr 1994, v1.325: Removed a bug which caused sc fonts to have the + same names as u&lc fonts. Fixed a bug which was causing oblique + fonts not to be generated properly. Fixed a bug with FD + generation which was producing too few arguments for + DeclareFontShape for substitutions. + +27 May 1994, v1.326: Made fontinst.tex a 2e document. Fixed a bug + with generating slant which was generating slant in design size per + point rather than points per point. Sigh. Ciar\'an \'O Duibh\'in + spotted that one. Declared this to be the first full release. + +1 Jun 1994, v1.327: Fixed bug with filename parsing which was losing + variants. Rewrote the encoding files to use the OT1 tt encoding + whenever monoweight is set. Removed the f-liagatures from the T1 + encoding for monowidth fonts. Sebastian spotted that one. + +2 Jun 1994, v1.328: Fixed a bug with FD generation: I'd added the + extra argument for series substitutions but not shape + substitutions. Ta Sebastian again. + +3 Jun 1994, v1.329: Made Upsilon1 unfakable. + +15 Jun 1994, v1.330: Fixed a bug with font substitution which was + ignoring chains of substitutions such as bx -> b -> db. Added the + m->l substitution. Renamed the `mn' and `bn' series to `mc' and + 'bc'. Added the `k' and `m' series. + +16 Jun 1994, v1.331: Sebastian spotted another problem with + substitutions. If a font had both a series and a shape + substitution, the series was sometimes getting lost. + Steve Grathwohl pointed out that I'd forgotten to switch off + kerning before loading the math italic fonts in fontcmro. + +27 Jun 1994, v1.332: Added braces to \needsfontinstversion, which was + clobbering \a_dimen and \b_dimen. Fixed a bug with compwordmark + which was causing it to get letterspacing added to it. Added the + GLYPH-spacing variable to cope with this. These were + spotted by Constantin Kahn. + +29 Jun 1994, v1.333: Added \ProvidesFile line to the .fd files. + +16 Aug 1994, v1.334: Added \frompl, fixed bugs with \resetdim and + <ccedilla>---all reported by Constantin Kahn. + +9 Sep 1994, v1.335: Fixed a bug with NEXTLARGER and VARCHAR generation + which was causing the entries to be printed out for nonexistent + glyphs---spotted by Alan Hoenig. Updated the example installation + files for Times, Helvetica and Courier. Updated to a more recent + trig.sty, and added the hacks to allow trig.sty to be used outside + LaTeX2e. Made fontinst.sty initex processable, so you can save + memory by building your own fontinst format without plain. Fixed + the names of `narrow' fonts, which used to clobber the non-narrow + fonts---spotted by Peter Busk Laursen. + +12 Sep 1994, v1.336: Fixed a bug with fontcmro, which was listing the + 9pt font as being 10pt in the fd file---spotted by Steve Grathwohl. + +22 Sep 1994, v1.337: Corrected spelling mistake in \declareencoding in + error message of \CODINGSCHEME---spotted by Alan Hoenig. + +8 Oct 1994, v1.338: Corrected definition of \space in + fontinst.ini---spotted by Rob Hutchings. + +18 Nov 1994, v1.339: Added 8r.etx and 8r.enc from Sebastian. + Distributed a patched fontinst.rc file containing a reimplementation + of \latinfamily that uses the 8r encoding. + +21 Nov 1994, v1.400: Added missing \fi to 8r.etx---spotted by Steve + Grahthwohl. Added \mtxtopl for expert fonts in + \latinfamily---spotted by Rob Hutchings. + +29 Nov 1994, v1.401: Added hyphen+hyphenchar = hyphenchar lig to + T1.etx (so that foo-bar words can be hyphenated as foo<hyphenchar> + bar)---spotted by Frank Mittelbach. Made default stretch and + shrink 50% and 16.7% of <space> respectively. Added \everyjob to + fontinst.ini to load the fontinst.rc file---spotted by Rob + Hutchings. + +7 Dec 1994, v1.402: Corrected typos with 8r.etx---spotted by + Constantin Kahn. + +12 May 1995, v1.403: Mentioned the pl files in fontinst.tex, and added + the encoding TEX TEXT WITHOUT F-LIGATURES. Both spotted by John + Wells. + +16 Sep 1995, v1.500: Incorporated changes by SPQR and CK in their + fontinst.rc file. In detail... Added the \NOFILES debugging + option. Used SPQR and CK's complete reimplementation of + \latinfamily. Added the TEXBASE1ENCODING. Added \etxtopl and + \installrawfont. Added the setting of \errorcontextlines. Grabbed + T1i.etx from CTAN. Added the setting of \newlinechar (pointed out + by Constantin). Fixed bug with \resetcommand which stopped braces + around the csname from working (Contantin again). Removed the + contrib/zd directory at Constantin's request. Rewrote the + documentation. Added fontinst.cls. + +[16 Sep 1995, v1.500 on CTAN with fonts/psfonts/tools] + +21 Sep 1995, v1.501: Corrected some typos in the documentation. + Added kerns for ng, Ng and hyphenchar. Fixed spacing in faked + <FFsmall> and friends. Fixed kerning of <dotlessJ>. Raised the + <macron> in <dbar> to half-way between the xheight and the height of + <d>. Added fake <ng> -> <eng>. Made \cscbotaccent and + \csctopaccent look to see if both of the glyphs exist rather than just + the first. Thanks to Hilmar Schlegel for all these points. + +29 Sep 1995, v1.502: Renamed all the distributed afm files from + *0*.afm to *8a*.afm. Updated the file header on 8r.etx. + Renamed Karl's fontinst.rc to karl-fontinst.rc, to avoid it being + picked up by every punter. + All pointed out by Sebastian. + +24 Nov 1995, v1.503: Included Alan Hoenig's vfinst in contrib/vfinst. + +23 Jan 1996, v1.504: Included some of Sebastian's changes to OT1.etx: + upped stretch and shrink to .6 and .24 of space; reduced extra + space after . to .24 of space; removed <endash> + <hyphen> = + <emdash> ligature from OT1 monowidth; made \setslot{grave} + etc. into \setslot{\lc{Grave}{grave}} etc; fixed a bug with T1c + `monoweight' -> `monowidth' (!); implemented Rob's changes to + small caps and small accented caps; included fake kerning for + Udieresis; added hackery from spqr.rc for faking small caps and + faking widths. + +[28 Jan 1996, v1.504 on CTAN with:fonts/psfonts/tools] + +24 Jan 1996, v1.505: Updated fontptcm.tex to use ptmr8a rather than ptmr0. + +25 Jan 1996, v1.506: Added extra braces to \latinfamily to stop + setting of \digits in one run from affecting it in subsequent + runs. Spotted by Richard Walker. + +23 Feb 1996, v1.507: Replaced vpltovf by vptovf. Spotted by Sebastian. + +17 Jun 1996, v1.508: Added an \ifdim check to stop lots of MOVERIGHT R 0.0 + instructions being generated. Spotted by Sebastian. + +18 Jun 1996, v1.509: Allow real numbers in .afm files. Spotted by + Gintautas Grigelionis. Made spaces before ; optional, in order to + parse v2.0 afm files (spaces before ; were made compulsory in v3.0). + +20 Jun 1996, v1.510: Added 9d and 9o encodings for fonts with + old-style digits. + +21 Jun 1996, v1.511: Removed \endinput from the end of .fd files, so + that additions can be made more easily. + +24 Jul 1996, v1.512: Updated version of trig.sty. + +7 Aug 1996, v1.513: Moved unfakable glyphs eariler in latin.mtx so + that all-caps fonts will work. + +6 Feb 1997, v1.514: Added a zero-width rule to cwm in latin.mtx (to + stop the MAP entry from being empty). Made cwm 1ex high. + +--- Copyright 1993, 1994, 1995, 1996 Alan Jeffrey --- + +11 Feb 1997, unofficial v1.6 SPQR on CTAN:fonts/psfonts/tools + Derived from v1.504 with minor hacks and fixes (not documented). + +29 May 1998, unofficial v1.7 SPQR on CTAN:fonts/psfonts/tools + Derived from v1.6 with fixes by UV. Corrected mapping of weights. + Added code for 8r-encoded AFM files (intended to cope with ttf2afm + limitations, but taken out again after ttf2afm was updated). + +22 Jun 1998, unofficial v1.8 UV + Derived from v1.7 and v1.511. Many .etx/.mtx files touched up. + fontinst.sty and fontdoc.sty now generated from fontinst.dtx. + \textcompfamily integrated into \latinfamily. Reintroduced + oldstyle encodings (from v1.511). 8y.etx/8y.mtx added as an + alternative to 8r.etx/8r.mtx. ts1.etx and textcomp.mtx revised. + +30 Jun 1998, unofficial v1.800 UV on CTAN:fonts/utilities/fontinst + Several changes to examples/mathptm and examples/mathptmx. + +07 Jun 1998, v1.801: Fixed a bug when oldstyle small-caps fonts + are generated from <font>8r + <font>8x instead of <font>c8r. |