diff options
Diffstat (limited to 'Master/bin/powerpc-linux/texi2dvi')
| -rwxr-xr-x | Master/bin/powerpc-linux/texi2dvi | 836 |
1 files changed, 836 insertions, 0 deletions
diff --git a/Master/bin/powerpc-linux/texi2dvi b/Master/bin/powerpc-linux/texi2dvi new file mode 100755 index 00000000000..18f6f59322b --- /dev/null +++ b/Master/bin/powerpc-linux/texi2dvi @@ -0,0 +1,836 @@ +#! /bin/sh +# texi2dvi --- produce DVI (or PDF) files from Texinfo (or LaTeX) sources. +# $Id: texi2dvi,v 1.42 2005/02/11 13:35:14 karl Exp $ +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, +# 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can either send email to this +# program's maintainer or write to: The Free Software Foundation, +# Inc.; 59 Temple Place, Suite 330; Boston, MA 02111-1307, USA. +# +# Original author: Noah Friedman. +# +# Please send bug reports, etc. to bug-texinfo@gnu.org. +# If possible, please send a copy of the output of the script called with +# the `--debug' option when making a bug report. + +test -f /bin/ksh && test -z "$RUNNING_KSH" \ + && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \ + && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; } +unset RUNNING_KSH + +# This string is expanded by rcs automatically when this file is checked out. +rcs_revision='$Revision: 1.42 $' +rcs_version=`set - $rcs_revision; echo $2` +program=`echo $0 | sed -e 's!.*/!!'` +version="texi2dvi (GNU Texinfo 4.8) $rcs_version + +Copyright (C) 2005 Free Software Foundation, Inc. +There is NO warranty. You may redistribute this software +under the terms of the GNU General Public License. +For more information about these matters, see the files named COPYING." + +usage="Usage: $program [OPTION]... FILE... + +Run each Texinfo or LaTeX FILE through TeX in turn until all +cross-references are resolved, building all indices. The directory +containing each FILE is searched for included files. The suffix of FILE +is used to determine its language (LaTeX or Texinfo). + +Makeinfo is used to perform Texinfo macro expansion before running TeX +when needed. + +Operation modes: + -b, --batch no interaction + -c, --clean remove all auxiliary files + -D, --debug turn on shell debugging (set -x) + -h, --help display this help and exit successfully + -o, --output=OFILE leave output in OFILE (implies --clean); + Only one input FILE may be specified in this case + -q, --quiet no output unless errors (implies --batch) + -s, --silent same as --quiet + -v, --version display version information and exit successfully + -V, --verbose report on what is done + +TeX tuning: + -@ use @input instead of \input; for preloaded Texinfo + -e, -E, --expand force macro expansion using makeinfo + -I DIR search DIR for Texinfo files + -l, --language=LANG specify the LANG of FILE (LaTeX or Texinfo) + -p, --pdf use pdftex or pdflatex for processing + -r, --recode call recode before TeX to translate input characters + -t, --command=CMD insert CMD in copy of input file + or --texinfo=CMD multiple values accumulate + +The values of the BIBTEX, LATEX (or PDFLATEX), MAKEINDEX, MAKEINFO, +TEX (or PDFTEX), TEXINDEX, and THUMBPDF environment variables are used +to run those commands, if they are set. Any CMD strings are added +after @setfilename for Texinfo input, in the first line for LaTeX input. + +Email bug reports to <bug-texinfo@gnu.org>, +general questions and discussion to <help-texinfo@gnu.org>. +Texinfo home page: http://www.gnu.org/software/texinfo/" + +# Initialize variables for option overriding and otherwise. +# Don't use `unset' since old bourne shells don't have this command. +# Instead, assign them an empty value. +batch=false # eval for batch mode +clean= +debug= +escape='\' +expand= # t for expansion via makeinfo +miincludes= # makeinfo include path +oformat=dvi +oname= # --output +quiet= # by default let the tools' message be displayed +recode=false +set_language= +textra= # Extra TeX commands to insert in the input file. +textra_cmd= # sed command to insert TEXTRA where appropriate +tmpdir=${TMPDIR:-/tmp}/t2d$$ # avoid collisions on 8.3 filesystems. +txincludes= # TEXINPUTS extensions, with trailing colon +txiprereq=19990129 # minimum texinfo.tex version with macro expansion +verb=false # echo for verbose mode + +orig_pwd=`pwd` + +# Systems which define $COMSPEC or $ComSpec use semicolons to separate +# directories in TEXINPUTS -- except for Cygwin, where COMSPEC might be +# inherited, but : is used. +if test -n "$COMSPEC$ComSpec" && uname | grep -iv cygwin >/dev/null; then + path_sep=";" +else + path_sep=":" +fi + +# Pacify verbose cds. +CDPATH=${ZSH_VERSION+.}$path_sep + +# In case someone crazy insists on using grep -E. +: ${EGREP=egrep} + +# return true if program $1 is somewhere in PATH, else false. +# +findprog () +{ + foundprog=false + + saveIFS=$IFS + IFS=$path_sep # break path components at the path separator + for dir in $PATH; do + # use test -x rather than test -f for DJGPP, where test -x checks + # for .exe. But test -x will also return true for directories, so + # explicitly ignore those. + if test -x "$dir/$1" && test ! -d "$dir/$1"; then + foundprog=true + break + + # But on cygwin, test -x foo will not find foo.exe. So also check + # for that. + elif test -x "$dir/$1.exe"; then + foundprog=true + break + fi + done + IFS=$saveIFS + $foundprog +} + +# Report some information. +report () +{ + for i in "$@" + do + echo >&2 "$0: $i" + done +} + +# Report some verbose information. +verbose () +{ + $verb >&2 "$0: $@" +} + +# Report an error and exit with failure. +fatal () +{ + s=$1 + shift + report "$@" + exit $s +} + +# Save TEXINPUTS so we can construct a new TEXINPUTS path for each file. +# Likewise for bibtex and makeindex. +tex_envvars="BIBINPUTS BSTINPUTS INDEXSTYLE TEXINPUTS" +for var in $tex_envvars; do + eval ${var}_orig=\$$var + export $var +done + + +# Push a token among the arguments that will be used to notice when we +# ended options/arguments parsing. +# Use "set dummy ...; shift" rather than 'set - ..." because on +# Solaris set - turns off set -x (but keeps set -e). +# Use ${1+"$@"} rather than "$@" because Digital Unix and Ultrix 4.3 +# still expand "$@" to a single argument (the empty string) rather +# than nothing at all. +arg_sep="$$--$$" +set dummy ${1+"$@"} "$arg_sep"; shift + +# +# Parse command line arguments. +while test x"$1" != x"$arg_sep"; do + + # Handle --option=value by splitting apart and putting back on argv. + case "$1" in + --*=*) + opt=`echo "$1" | sed -e 's/=.*//'` + val=`echo "$1" | sed -e 's/[^=]*=//'` + shift + set dummy "$opt" "$val" ${1+"$@"}; shift + ;; + esac + + # This recognizes --quark as --quiet. So what. + case "$1" in + -@ ) escape=@;; + # Silently and without documentation accept -b and --b[atch] as synonyms. + -b | --b*) batch=true;; + -c | --c*) clean=t;; + -D | --d*) debug=t;; + -e | -E | --e*) expand=t;; + -h | --h*) echo "$usage"; exit 0;; + -I | --I*) + shift + miincludes="$miincludes -I $1" + txincludes="$txincludes$1$path_sep" + ;; + -l | --l*) shift; set_language=$1;; + -o | --o*) + shift + clean=t + case "$1" in + /* | ?:/*) oname=$1;; + *) oname="$orig_pwd/$1";; + esac;; + -p | --p*) oformat=pdf;; + -q | -s | --q* | --s*) quiet=t; batch=true;; + -r | --r*) recode=true;; + -t | --tex* | --com* ) shift; textra="$textra\\ +"`echo "$1" | sed 's/\\\\/\\\\\\\\/g'`;; + -v | --vers*) echo "$version"; exit 0;; + -V | --verb*) verb=echo;; + --) # What remains are not options. + shift + while test x"$1" != x"$arg_sep"; do + set dummy ${1+"$@"} "$1"; shift + shift + done + break;; + -*) + fatal 1 "Unknown or ambiguous option \`$1'." \ + "Try \`--help' for more information." + ;; + *) set dummy ${1+"$@"} "$1"; shift;; + esac + shift +done +# Pop the token +shift + +# Interpret remaining command line args as filenames. +case $# in + 0) + fatal 2 "Missing file arguments." "Try \`--help' for more information." + ;; + 1) ;; + *) + if test -n "$oname"; then + fatal 2 "Can't use option \`--output' with more than one argument." + fi + ;; +esac + + +# We can't do much without tex. +# +if findprog ${TEX:-tex}; then :; else cat <<EOM +You don't have a working TeX binary (${TEX:-tex}) installed anywhere in +your PATH, and texi2dvi cannot proceed without one. If you want to use +this script, you'll need to install TeX (if you don't have it) or change +your PATH or TEX environment variable (if you do). See the --help +output for more details. + +For information about obtaining TeX, please see http://www.tug.org. If +you happen to be using Debian, you can get it with this command: + apt-get install tetex-bin +EOM + exit 1 +fi + + +# We want to use etex (or pdftex) if they are available, and the user +# didn't explicitly specify. We don't check for elatex and pdfelatex +# because (as of 2003), the LaTeX team has asked that new distributions +# use etex by default anyway. +# +# End up with the TEX and PDFTEX variables set to what we are going to use. +if test -z "$TEX"; then + if findprog etex; then TEX=etex; else TEX=tex; fi +fi +# +if test -z "$PDFTEX"; then + if findprog pdfetex; then PDFTEX=pdfetex; else PDFTEX=pdftex; fi +fi + + +# Prepare the temporary directory. Remove it at exit, unless debugging. +if test -z "$debug"; then + trap "cd / && rm -rf $tmpdir" 0 1 2 15 +fi + +# Create the temporary directory with strict rights +(umask 077 && mkdir $tmpdir) || exit 1 + +# Prepare the tools we might need. This may be extra work in some +# cases, but improves the readability of the script. +utildir=$tmpdir/utils +mkdir $utildir || exit 1 + +# A sed script that preprocesses Texinfo sources in order to keep the +# iftex sections only. We want to remove non TeX sections, and comment +# (with `@c texi2dvi') TeX sections so that makeinfo does not try to +# parse them. Nevertheless, while commenting TeX sections, don't +# comment @macro/@end macro so that makeinfo does propagate them. +# Unfortunately makeinfo --iftex --no-ifinfo doesn't work well enough +# (yet), makeinfo can't parse the TeX commands, so work around with sed. +# +comment_iftex_sed=$utildir/comment.sed +cat <<EOF >$comment_iftex_sed +/^@tex/,/^@end tex/{ + s/^/@c texi2dvi/ +} +/^@iftex/,/^@end iftex/{ + s/^/@c texi2dvi/ + /^@c texi2dvi@macro/,/^@c texi2dvi@end macro/{ + s/^@c texi2dvi// + } +} +/^@ifnottex/,/^@end ifnottex/{ + s/^/@c (texi2dvi)/ +} +/^@ifinfo/,/^@end ifinfo/{ + /^@node/p + /^@menu/,/^@end menu/p + t + s/^/@c (texi2dvi)/ +} +s/^@ifnotinfo/@c texi2dvi@ifnotinfo/ +s/^@end ifnotinfo/@c texi2dvi@end ifnotinfo/ +EOF +# Uncommenting is simple: Remove any leading `@c texi2dvi'. +uncomment_iftex_sed=$utildir/uncomment.sed +cat <<EOF >$uncomment_iftex_sed +s/^@c texi2dvi// +EOF + +# Compute the list of xref files. +# Takes the filename (without extension) of which we look for xref +# files as argument. The index files must be reported last. +get_xref_files () +{ + # Get list of xref files (indexes, tables and lists). + # Find all files having root filename with a two-letter extension, + # saves the ones that are really Texinfo-related files. .?o? catches + # many files: .toc, .log, LaTeX tables and lists, FiXme's .lox, maybe more. + for this_file in "$1".?o? "$1".aux "$1".?? "$1".idx; do + # If file is empty, skip it. + test -s "$this_file" || continue + # If the file is not suitable to be an index or xref file, don't + # process it. It's suitable if the first character is a + # backslash or right quote or at, as long as the first line isn't + # \input texinfo. + first_character=`sed -n '1s/^\(.\).*$/\1/p;q' $this_file` + if (test "x$first_character" = "x\\" \ + && sed 1q $this_file | grep -v '^\\input *texinfo' >/dev/null) \ + || test "x$first_character" = "x'" \ + || test "x$first_character" = "x@"; then + xref_files="$xref_files ./$this_file" + fi + done + echo "$xref_files" +} + +# Convert relative paths to absolute paths, so we can run in another +# directory (e.g., in --clean mode, or during the macro-support detection.) +# +# Empty path components are meaningful to tex. We rewrite them +# as `EMPTY' so they don't get lost when we split on $path_sep. +# Hopefully no one will have an actual directory named EMPTY. +absolute_filenames () +{ + replace_empty="-e 's/^$path_sep/EMPTY$path_sep/g' \ + -e 's/$path_sep\$/${path_sep}EMPTY/g' \ + -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'" + _res=`echo "$1" | eval sed $replace_empty` + save_IFS=$IFS + IFS=$path_sep + set x $_res; shift + _res=. + for dir + do + case $dir in + EMPTY) + _res=$_res$path_sep + ;; + [\\/]* | ?:[\\/]*) # Absolute paths don't need to be expanded. + _res=$_res$path_sep$dir + ;; + *) + abs=`cd "$dir" && pwd` && _res=$_res$path_sep$abs + ;; + esac + done + echo "$_res" +} + + +# run_tex () +# ---------- +# Run TeX as "$tex $tex_args $filename_input", taking care of errors +# and logs. +run_tex () +{ + # Note that this will be used via an eval: quote properly. + cmd=$tex + + # If possible, make TeX report error locations in GNU format. + tex_args= + case $tex_help in + *file-line-error*) cmd="$cmd --file-line-error";; + esac + + # Tell TeX to be batch if requested. + if $batch; then + # \batchmode does not show terminal output at all, so we don't + # want that. And even in batch mode, TeX insists on having input + # from the user. Close its stdin to make it impossible. + cmd="$cmd </dev/null '${escape}nonstopmode' '${escape}input'" + fi + + cmd="$cmd '$filename_input'" + + verbose "Running $cmd ..." + if eval "$cmd" >&5; then :; else + test "$clean" = t \ + && cp "$filename_noext.log" "$orig_pwd" + fatal 1 "$tex exited with bad status, quitting." \ + "see $filename_noext.log for errors." + fi +} + +# File descriptor usage: +# 0 standard input +# 1 standard output (--verbose messages) +# 2 standard error +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 5 tools output (turned off by --quiet) +# 6 tracing/debugging (set -x output, etc.) + +# Tools' output. If quiet, discard, else redirect to the message flow. +if test "$quiet" = t; then + exec 5>/dev/null +else + exec 5>&1 +fi + +# Enable tracing +if test "$debug" = t; then + exec 6>&1 + set -x +else + exec 6>/dev/null +fi + +# +# TeXify files. + +for command_line_filename in ${1+"$@"}; do + verbose "Processing $command_line_filename ..." + + # If the COMMAND_LINE_FILENAME is not absolute (e.g., --debug.tex), + # prepend `./' in order to avoid that the tools take it as an option. + echo "$command_line_filename" | $EGREP '^(/|[A-z]:/)' >&6 \ + || command_line_filename="./$command_line_filename" + + # See if the file exists. If it doesn't we're in trouble since, even + # though the user may be able to reenter a valid filename at the tex + # prompt (assuming they're attending the terminal), this script won't + # be able to find the right xref files and so forth. + if test ! -r "$command_line_filename"; then + report "Could not read $command_line_filename, skipping." + continue + fi + + # Get the name of the current directory. We want the full path + # because in clean mode we are in tmp, in which case a relative + # path has no meaning. + filename_dir=`echo $command_line_filename | sed 's!/[^/]*$!!;s!^$!.!'` + filename_dir=`cd "$filename_dir" >/dev/null && pwd` + + # Strip directory part but leave extension. + filename_ext=`basename "$command_line_filename"` + # Strip extension. + filename_noext=`echo "$filename_ext" | sed 's/\.[^.]*$//'` + ext=`echo "$filename_ext" | sed 's/^.*\.//'` + + # _src. Use same basename since we want to generate aux files with + # the same basename as the manual. If --expand, then output the + # macro-expanded file to here, else copy the original file. + tmpdir_src=$tmpdir/src + filename_src=$tmpdir_src/$filename_noext.$ext + + # _xtr. The file with the user's extra commands. + tmpdir_xtr=$tmpdir/xtr + filename_xtr=$tmpdir_xtr/$filename_noext.$ext + + # _rcd. The Texinfo file recoded in 7bit. + tmpdir_rcd=$tmpdir/rcd + filename_rcd=$tmpdir_rcd/$filename_noext.$ext + + # _bak. Copies of the previous xref files (another round is run if + # they differ from the new one). + tmpdir_bak=$tmpdir/bak + + # Make all those directories and give up if we can't succeed. + mkdir $tmpdir_src $tmpdir_xtr $tmpdir_rcd $tmpdir_bak || exit 1 + + # Source file might include additional sources. + # We want `.:$orig_pwd' before anything else. (We'll add `.:' later + # after all other directories have been turned into absolute paths.) + # `.' goes first to ensure that any old .aux, .cps, + # etc. files in ${directory} don't get used in preference to fresher + # files in `.'. Include orig_pwd in case we are in clean mode, where + # we've cd'd to a temp directory. + common="$orig_pwd$path_sep$filename_dir$path_sep$txincludes" + for var in $tex_envvars; do + eval ${var}="\$common\$${var}_orig" + export $var + done + + # Convert relative paths to absolute paths, so we can run in another + # directory (e.g., in --clean mode, or during the macro-support detection.) + TEXINPUTS=`absolute_filenames "$TEXINPUTS"` + verbose "TEXINPUTS: $TEXINPUTS" + BIBINPUTS=`absolute_filenames "$BIBINPUTS"` + verbose "BIBINPUTS: $BIBINPUTS" + BSTINPUTS=`absolute_filenames "$BSTINPUTS"` + verbose "BSTINPUTS: $BSTINPUTS" + INDEXSTYLE=`absolute_filenames "$INDEXSTYLE"` + verbose "INDEXSTYLE: $INDEXSTYLE" + + # If the user explicitly specified the language, use that. + # Otherwise, if the first line is \input texinfo, assume it's texinfo. + # Otherwise, guess from the file extension. + if test -n "$set_language"; then + language=$set_language + elif sed 1q "$command_line_filename" | grep 'input texinfo' >&6; then + language=texinfo + else + language= + fi + + # Get the type of the file (latex or texinfo) from the given language + # we just guessed, or from the file extension if not set yet. + case ${language:-$filename_ext} in + [lL]a[tT]e[xX] | *.ltx | *.tex) + # Assume a LaTeX file. LaTeX needs bibtex and uses latex for + # compilation. No makeinfo. + language=latex + bibtex=${BIBTEX:-bibtex} + makeinfo= # no point in running makeinfo on latex source. + texindex=${MAKEINDEX:-makeindex} + textra_cmd=1i + if test $oformat = dvi; then + tex=${LATEX:-latex} + else + tex=${PDFLATEX:-pdflatex} + fi + thumbpdf=${THUMBPDF:-thumbpdf} + ;; + + *) + # Assume a Texinfo file. Texinfo files need makeinfo, texindex and tex. + language=texinfo + bibtex= + texindex=${TEXINDEX:-texindex} + textra_cmd='/^@setfilename/a' + if test $oformat = dvi; then + # MetaPost also uses the TEX environment variable. If the user + # has set TEX=latex for that reason, don't bomb out. + if echo $TEX | grep 'latex$' >/dev/null; then + tex=tex # don't bother trying to find etex + else + tex=$TEX + fi + else + tex=$PDFTEX + fi + # Unless required by the user, makeinfo expansion is wanted only + # if texinfo.tex is too old. + if test "$expand" = t; then + makeinfo=${MAKEINFO:-makeinfo} + else + # Check if texinfo.tex performs macro expansion by looking for + # its version. The version is a date of the form YEAR-MO-DA. + # We don't need to use [0-9] to match the digits since anyway + # the comparison with $txiprereq, a number, will fail with non + # digits. + # Run in the tmpdir to avoid leaving files. + ( + cd $tmpdir + echo '\input texinfo.tex @bye' >txiversion.tex + # Be sure that if tex wants to fail, it is not interactive: + # close stdin. + $tex txiversion.tex </dev/null + ) >$tmpdir/txiversion.out 2>$tmpdir/txiversion.err + if test $? != 0; then + cat $tmpdir/txiversion.out + cat $tmpdir/txiversion.err >&2 + fatal 1 "texinfo.tex appears to be broken, quitting." + fi + eval `sed -n 's/^.*\[\(.*\)version \(....\)-\(..\)-\(..\).*$/txiformat=\1 txiversion="\2\3\4"/p' $tmpdir/txiversion.out` + verbose "texinfo.tex preloaded as \`$txiformat', version is \`$txiversion' ..." + if test "$txiprereq" -le "$txiversion" >/dev/null 2>&1; then + makeinfo= + else + makeinfo=${MAKEINFO:-makeinfo} + fi + # As long as we had to run TeX, offer the user this convenience: + test "$txiformat" = Texinfo && escape=@ + fi + thumbpdf=${THUMBPDF:-thumbpdf} + ;; + esac + + # Go to $tmpdir to try --help, since old versions that don't accept + # --help will generate a texput.log. + tex_help=`cd $tmpdir >/dev/null && $tex --help </dev/null 2>&1` + + # Expand macro commands in the original source file using Makeinfo. + # Always use `end' footnote style, since the `separate' style + # generates different output (arguably this is a bug in -E). + # Discard main info output, the user asked to run TeX, not makeinfo. + if test -n "$makeinfo"; then + verbose "Macro-expanding $command_line_filename to $filename_src ..." + sed -f $comment_iftex_sed "$command_line_filename" \ + | $makeinfo --footnote-style=end -I "$filename_dir" $miincludes \ + -o /dev/null --macro-expand=- \ + | sed -f $uncomment_iftex_sed >"$filename_src" + filename_input=$filename_src + fi + + # If makeinfo failed (or was not even run), use the original file as input. + if test $? -ne 0 \ + || test ! -r "$filename_src"; then + verbose "Reverting to $command_line_filename ..." + filename_input=$filename_dir/$filename_ext + fi + + # Used most commonly for @finalout, @smallbook, etc. + if test -n "$textra"; then + verbose "Inserting extra commands: $textra" + sed "$textra_cmd\\ +$textra" "$filename_input" >"$filename_xtr" + filename_input=$filename_xtr + fi + + # If this is a Texinfo file with a specified input encoding, and + # recode is available, then recode to plain 7 bit Texinfo. + if test $language = texinfo; then + pgm='s/^ *@documentencoding *\([^ ][^ ]*\) *$/\1/ + t found + d + :found + q' + encoding=`sed -e "$pgm" "$filename_input"` + if $recode && test -n "$encoding" && findprog recode; then + verbose "Recoding from $encoding to Texinfo." + if recode "$encoding"..texinfo <"$filename_input" >"$filename_rcd" \ + && test -s "$filename_rcd"; then + filename_input=$filename_rcd + else + verbose "Recoding failed, using original input." + fi + fi + fi + + # If clean mode was specified, then move to the temporary directory. + if test "$clean" = t; then + verbose "cd $tmpdir_src" + cd "$tmpdir_src" || exit 1 + fi + + while :; do # will break out of loop below + orig_xref_files=`get_xref_files "$filename_noext"` + + # Save copies of originals for later comparison. + if test -n "$orig_xref_files"; then + verbose "Backing up xref files: `echo $orig_xref_files | sed 's|\./||g'`" + cp $orig_xref_files $tmpdir_bak + fi + + # Run bibtex on current file. + # - If its input (AUX) exists. + # - If AUX contains both `\bibdata' and `\bibstyle'. + # - If some citations are missing (LOG contains `Citation'). + # or the LOG complains of a missing .bbl + # + # We run bibtex first, because I can see reasons for the indexes + # to change after bibtex is run, but I see no reason for the + # converse. + # + # Don't try to be too smart. Running bibtex only if the bbl file + # exists and is older than the LaTeX file is wrong, since the + # document might include files that have changed. Because there + # can be several AUX (if there are \include's), but a single LOG, + # looking for missing citations in LOG is easier, though we take + # the risk to match false messages. + if test -n "$bibtex" \ + && test -r "$filename_noext.aux" \ + && test -r "$filename_noext.log" \ + && (grep '^\\bibdata[{]' "$filename_noext.aux" \ + && grep '^\\bibstyle[{]' "$filename_noext.aux" \ + && (grep 'Warning:.*Citation.*undefined' "$filename_noext.log" \ + || grep 'No file .*\.bbl\.' "$filename_noext.log")) \ + >&6 2>&1; \ + then + verbose "Running $bibtex $filename_noext ..." + $bibtex "$filename_noext" >&5 || + fatal 1 "$bibtex exited with bad status, quitting." + fi + + # What we'll run texindex on -- exclude non-index files. + # Since we know index files are last, it is correct to remove everything + # before .aux and .?o?. But don't really do <anything>o<anything> + # -- don't match whitespace as <anything>. + # Otherwise, if orig_xref_files contains something like + # foo.xo foo.whatever + # the space after the o will get matched. + index_files=`echo "$orig_xref_files" \ + | sed "s!.*\.aux!!g; + s!./$filename_noext\.[^ ]o[^ ]!!g; + s/^[ ]*//;s/[ ]*$//"` + # Run texindex (or makeindex) on current index files. If they + # already exist, and after running TeX a first time the index + # files don't change, then there's no reason to run TeX again. + # But we won't know that if the index files are out of date or + # nonexistent. + if test -n "$texindex" && test -n "$index_files"; then + verbose "Running $texindex $index_files ..." + $texindex $index_files 2>&5 1>&2 || + fatal 1 "$texindex exited with bad status, quitting." + fi + + # Finally, run TeX. + run_tex + + # Decide if looping again is needed. + finished=t + + # LaTeX (and the package changebar) report in the LOG file if it + # should be rerun. This is needed for files included from + # subdirs, since texi2dvi does not try to compare xref files in + # subdirs. Performing xref files test is still good since LaTeX + # does not report changes in xref files. + if grep "Rerun to get" "$filename_noext.log" >&6 2>&1; then + finished= + fi + + # Check if xref files changed. + new_xref_files=`get_xref_files "$filename_noext"` + verbose "Original xref files = `echo $orig_xref_files | sed 's|\./||g'`" + verbose "New xref files = `echo $new_xref_files | sed 's|\./||g'`" + + # If old and new lists don't at least have the same file list, + # then one file or another has definitely changed. + test "x$orig_xref_files" != "x$new_xref_files" && finished= + + # File list is the same. We must compare each file until we find + # a difference. + if test -n "$finished"; then + for this_file in $new_xref_files; do + verbose "Comparing xref file `echo $this_file | sed 's|\./||g'` ..." + # cmp -s returns nonzero exit status if files differ. + if cmp -s "$this_file" "$tmpdir_bak/$this_file"; then :; else + # We only need to keep comparing until we find one that + # differs, because we'll have to run texindex & tex again no + # matter how many more there might be. + finished= + verbose "xref file `echo $this_file | sed 's|\./||g'` differed ..." + test "$debug" = t && diff -c "$tmpdir_bak/$this_file" "$this_file" + break + fi + done + fi + + # If finished, exit the loop, else rerun the loop. + test -n "$finished" && break + done # while :; + + # If we were using thumbpdf and producing PDF, then run thumbpdf + # and TeX one last time. + if test $oformat = pdf \ + && test -r "$filename_noext.log" \ + && grep 'thumbpdf\.sty' "$filename_noext.log" >&6 2>&1; \ + then + verbose "Running $thumbpdf $filename_noext ..." + $thumbpdf "$filename_noext" >&5 || + fatal 1 "$thumbpdf exited with bad status, quitting." + run_tex + fi + + + # If we were in clean mode, compilation was in a tmp directory. + # Copy the DVI (or PDF) file into the directory where the compilation + # has been done. (The temp dir is about to get removed anyway.) + # We also return to the original directory so that + # - the next file is processed in correct conditions + # - the temporary file can be removed + if test -n "$clean"; then + if test -n "$oname"; then + dest=$oname + else + dest=$orig_pwd + fi + verbose "Copying $oformat file from `pwd` to $dest" + cp -p "./$filename_noext.$oformat" "$dest" + cd / # in case $orig_pwd is on a different drive (for DOS) + cd $orig_pwd || exit 1 + fi + + # Remove temporary files. + if test "x$debug" = "x"; then + verbose "Removing $tmpdir_src $tmpdir_xtr $tmpdir_bak ..." + cd / + rm -rf $tmpdir_src $tmpdir_xtr $tmpdir_bak + fi +done + +verbose "done." +exit 0 # exit successfully, not however we ended the loop. |