summaryrefslogtreecommitdiff
path: root/Build
diff options
context:
space:
mode:
Diffstat (limited to 'Build')
-rw-r--r--Build/source/extra/epstopdf/Makefile51
-rw-r--r--Build/source/extra/epstopdf/README9
-rw-r--r--Build/source/extra/epstopdf/epstopdf.110
-rwxr-xr-xBuild/source/extra/epstopdf/epstopdf.pl49
4 files changed, 86 insertions, 33 deletions
diff --git a/Build/source/extra/epstopdf/Makefile b/Build/source/extra/epstopdf/Makefile
index 04f106f913c..c909dccc98b 100644
--- a/Build/source/extra/epstopdf/Makefile
+++ b/Build/source/extra/epstopdf/Makefile
@@ -6,20 +6,22 @@ e2p = ./$(prg).pl #--debug
re2p = ./r$(prg) --restricted
re2p_script = ./r$(prg)
-default:
+default: check
+
+$(re2p_script):
+ ln -s $(prg).pl $@
# These are not comprehensive tests by any means. Mostly we're just
# making sure we don't crash.
-check: check-help check-version \
- check-help-r \
+check: check-help check-version check-help-r check-usage \
check-atend \
check-binary check-bin2 \
check-binhdr-lf check-binhdr-cr check-binhdr-crlf \
+ check-filter check-filter-outfile \
check-gray \
check-gscmd check-gsopt check-gsopts \
- check-filter check-filter-outfile \
- check-gscmd \
check-nogs \
+ check-output \
check-percent \
check-restricted-device \
check-restricted-gscmd \
@@ -37,25 +39,22 @@ check-version:
check-help-r: $(re2p_script)
$(re2p_script) --help | grep restricted # should have default=true
-check-nogs:
- $(e2p) --no-gs test-simple.eps >test-simple.out
-# the two files should be different:
- cmp -s test-simple.eps test-simple.out || exit 0
-
-$(re2p_script):
- ln -s $(prg).pl $@
+check-usage:
+ ! $(e2p) # no args
+ ! $(e2p) arg1 arg2 arg3 # too many args
+ ! $(e2p) --nonesuch # no option
-check-restricted-device:
+check-restricted-device: $(re2p_script)
! $(re2p) --device=unsafe test-simple.eps
-check-restricted-gscmd:
+check-restricted-gscmd: $(re2p_script)
! $(re2p) --gscmd=/bin/unsafe test-simple.eps
! $(re2p) --gscmd=unsafe test-simple.eps
-check-restricted-safe-in:
+check-restricted-safe-in: $(re2p_script)
! $(re2p) /unsafe/in.eps
-check-restricted-safe-out:
+check-restricted-safe-out: $(re2p_script)
! $(re2p) test-simple.eps -o /unsafe/out.eps
check-filter:
@@ -90,6 +89,24 @@ check-gsopts:
$(e2p) --gscmd=echo --gsopts='foo bar' test-simple.eps
! $(e2p) --restricted --gsopts=bar test-simple.eps # fails
+check-nogs:
+ $(e2p) --no-gs test-simple.eps >test-simple.out
+# the two files should be different:
+ cmp -s test-simple.eps test-simple.out || exit 0
+
+check-output: $(re2p_script)
+ $(re2p) test-simple.eps -o test-p.pdf # not if restricted
+ # should do this everywhere -- remove first, validate after.
+ #rm -f test-o.pdf; $(e2p) -o test-o.pdf test-simple.eps; pdfinfo test-o.pdf
+ $(e2p) -o test-o.pdf test-simple.eps
+ $(e2p) --outfile test-o.pdf test-simple.eps
+ $(e2p) --outfile=test-o.pdf test-simple.eps
+ $(e2p) --output test-o.pdf test-simple.eps
+ $(e2p) test-simple.eps test-p.pdf
+ $(re2p) test-simple.eps test-p.pdf
+ ! $(e2p) test-simple.eps test-p.pdg # not .pdf
+ ! $(e2p) -o test-o.pdf test-simple.eps test-p.pdf # two methods
+
check-simple:
$(MAKE) file=test-simple check1
@@ -126,10 +143,12 @@ check-tn5002:
check-floral:
$(MAKE) file=test-floral check1
+# subtarget for simple test that conversion of $(file) works.
check1:
$(e2p) $(file).eps
pdfinfo $(file).pdf | grep "Page size"
+#
# put tar contents in a directory for CTAN.
dist: $(prg).tar.gz $(prg).html
.PHONY: dist
diff --git a/Build/source/extra/epstopdf/README b/Build/source/extra/epstopdf/README
index 18ca6aff779..f28e746db19 100644
--- a/Build/source/extra/epstopdf/README
+++ b/Build/source/extra/epstopdf/README
@@ -3,7 +3,7 @@ This file is public domain. (Originally written by Karl Berry, 2009.)
This is the README for the epstopdf script distribution.
-Primary distribution point: http://mirror.ctan.org/support/epstopdf/
+Primary distribution point: http://ctan.org/pkg/epstopdf
(list of mirrors at: http://ctan.org/mirrors)
Home page: http://tug.org/epstopdf/
@@ -15,7 +15,12 @@ When reporting bugs, please include an input file and command line
options, so the problem can be reproduced.
-------------------------------------------------------------------------
-The test-binary and test-bin2 files were supplied by Akira Kakuto and
+Various test files and a Makefile to drive them are in the source
+repository, which is currently a subdirectory of the texlive Subversion
+repo, purely for the developers' convenience:
+ http://tug.org/svn/texlive/trunk/Build/source/extra/epstopdf/
+
+The test-binary and test-bin2 files there were supplied by Akira Kakuto and
Reinhard Kotucha. They contain binary data. They are public domain.
The test-binhdr* files were supplied by Martin von Gagern, constructed
diff --git a/Build/source/extra/epstopdf/epstopdf.1 b/Build/source/extra/epstopdf/epstopdf.1
index 7d02b186a09..0405e4499f3 100644
--- a/Build/source/extra/epstopdf/epstopdf.1
+++ b/Build/source/extra/epstopdf/epstopdf.1
@@ -1,9 +1,9 @@
-.TH EPSTOPDF 1 "28 May 2016"
+.TH EPSTOPDF 1 "7 January 2017"
.\" $Id$
.SH NAME
epstopdf, repstopdf \- convert an EPS file to PDF
.SH SYNOPSIS
-\fBepstopdf\fP [\fIoptions\fP] [\fIepsfile\fP]
+\fBepstopdf\fP [\fIoptions\fP] [\fIepsfile\fP [\fIpdffile\fP.pdf]]
.SH DESCRIPTION
By default, \fBepstopdf\fP converts the input PostScript file to PDF,
using Ghostscript.
@@ -14,6 +14,11 @@ coordinate, and it sets a page size exactly corresponding to the
BoundingBox. Thus, the result needs no cropping, and the PDF MediaBox
is correct.
.PP
+By default, the output name is the input name with any extension
+replaced by \fB.pdf\fP. An output name ending with .pdf can also be given
+as a second argument on the command line, or the \fB--outfile\fP
+(\fB-o\fP) option can be used with any name.
+.PP
PJL commands at the start of a file are removed. DOS EPS binary files
(TN 5002) are supported.
.PP
@@ -107,6 +112,7 @@ names are allowed, those taking general strings are not.
These examples all equivalently convert `test.eps' to `test.pdf':
.nf
epstopdf test.eps
+epstopdf test.eps test.pdf
cat test.eps | epstopdf --filter >test.pdf
cat test.eps | epstopdf -f -o=test.pdf
.fi
diff --git a/Build/source/extra/epstopdf/epstopdf.pl b/Build/source/extra/epstopdf/epstopdf.pl
index 61ffc72181f..88bff419b66 100755
--- a/Build/source/extra/epstopdf/epstopdf.pl
+++ b/Build/source/extra/epstopdf/epstopdf.pl
@@ -34,9 +34,12 @@
# "%%BoundingBox: (atend)" when input is not seekable (e.g., from a pipe),
#
# emacs-page
-my $ver = "2.25";
-
-# History
+#
+my $ver = "2.26";
+# 2017/01/07 v2.26 (Norbert Preining, Karl Berry)
+# * allow cmdline of infile outfile.pdf.
+# * explicitly allow -o as abbreviation for --outfile,
+# to guard against future --options. (Also --output.)
# 2016/06/30 v2.25 (Norbert Preining, Karl Berry)
# * don't set (default) device until after restricted check.
# * a few more debugging lines.
@@ -182,7 +185,7 @@ my $ver = "2.25";
my $program = "epstopdf";
my $ident = '($Id$)' . " $ver";
my $copyright = <<END_COPYRIGHT ;
-Copyright 2009-2016 Karl Berry et al.
+Copyright 2009-2017 Karl Berry et al.
Copyright 2002-2009 Gerben Wierda et al.
Copyright 1998-2001 Sebastian Rahtz et al.
License RBSD: Revised BSD <http://www.xfree86.org/3.3.6/COPYRIGHT2.html#5>
@@ -331,9 +334,14 @@ my $resmsg = $::opt_res ? $::opt_res : "[use gs default]";
my $rotmsg = $::opt_autorotate ? $::opt_autorotate : "[use gs default]";
my $usage = <<"END_OF_USAGE";
-${title}Usage: $program [OPTION]... [EPSFILE]
+${title}Usage: $program [OPTION]... [EPSFILE [PDFFILE.pdf]]
+
+Convert an EPS file to PDF (or other formats), by default using Ghostscript.
-Convert EPS to PDF (or other formats), by default using Ghostscript.
+By default, the output name is the input name with any extension
+replaced by ".pdf". An output name ending with .pdf can also be given
+as a second argument on the command line, or the --outfile (-o) option
+can be used with any name.
The resulting output is guaranteed to start at the 0,0 coordinate, and
sets a page size exactly corresponding to the BoundingBox. Thus, the
@@ -346,7 +354,7 @@ Options:
--help display this help and exit
--version display version information and exit
- --outfile=FILE write result to FILE (default based on input name)
+ -o, --outfile=FILE write result to FILE (default based on input name)
--restricted use restricted mode (default: $bool[$restricted])
--(no)debug output debugging info (default: $bool[$::opt_debug])
@@ -376,6 +384,7 @@ Options for Ghostscript:
Examples all equivalently converting test.eps to test.pdf:
\$ $program test.eps
+ \$ $program test.eps test.pdf
\$ cat test.eps | $program --filter >test.pdf
\$ cat test.eps | $program -f -o=test.pdf
@@ -428,7 +437,7 @@ GetOptions (
"gsopts=s" => \&gsopts, # \ref{val_gsopts}
"help|h",
"hires!",
- "outfile=s", # \ref{openout_any}
+ "outfile|output|o=s", # \ref{openout_any}
"pdfsettings=s",
"quiet",
"res=s",
@@ -447,7 +456,7 @@ $restricted = 1 if $::opt_restricted;
sub debug { print STDERR "* @_\n" if $::opt_debug; }
sub warning { print STDERR "==> Warning: @_\n"; }
sub error { die "$title!!! Error: @_\n"; }
-sub errorUsage { die "Error: @_ (try --help for more information)\n"; }
+sub errorUsage { die "$program: Error: @_ (try --help for more information)\n"; }
sub warnerr { $restricted ? error(@_) : warning(@_); }
### debug messages
@@ -480,13 +489,13 @@ sub safe_name {
### help, version options.
if ($::opt_help) {
print $usage;
- exit (0);
+ exit 0;
}
if ($::opt_version) {
print $title;
print $copyright;
- exit (0);
+ exit 0;
}
### get input filename (\ref{openin_any} for validation)
@@ -496,10 +505,24 @@ if ($::opt_filter) {
errorUsage "Input file cannot be used with filter option";
debug "Filtering: will read standard input";
} else {
+ # not filtering.
@ARGV > 0 or errorUsage "Input filename missing";
- @ARGV < 2 or errorUsage "Unknown option or too many input files";
+ # allow infile outfile.pdf.
+ if (@ARGV == 2) {
+ if ($::opt_outfile) {
+ errorUsage ("Multiple output specifications: second arg=$ARGV[1],"
+ . " --outfile=$::opt_outfile");
+ }
+ if ($ARGV[1] !~ m/\.pdf$/i) {
+ errorUsage "Output file argument requires .pdf extension: $ARGV[1]";
+ }
+ # seems we can use it.
+ $::opt_outfile = $ARGV[1];
+ debug "Output filename from argv:", $::opt_outfile;
+ }
+ @ARGV > 2 and errorUsage "Too many arguments: @ARGV";
+
$InputFilename = $ARGV[0];
- #-r $InputFilename or error "\"$InputFilename\" not readable";
debug "Input filename:", $InputFilename;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 04:55:10 +0000