diff options
Diffstat (limited to 'Build/source')
-rw-r--r-- | Build/source/libs/libpng/ChangeLog | 9 | ||||
-rw-r--r-- | Build/source/libs/libpng/Makefile.in | 12 | ||||
-rw-r--r-- | Build/source/libs/libpng/aclocal.m4 | 37 | ||||
-rwxr-xr-x | Build/source/libs/libpng/configure | 142 | ||||
-rw-r--r-- | Build/source/libs/libpng/configure.ac | 42 | ||||
-rw-r--r-- | Build/source/libs/libpng/include/Makefile.in | 10 |
6 files changed, 219 insertions, 33 deletions
diff --git a/Build/source/libs/libpng/ChangeLog b/Build/source/libs/libpng/ChangeLog index 37517300d20..5adeb74a254 100644 --- a/Build/source/libs/libpng/ChangeLog +++ b/Build/source/libs/libpng/ChangeLog @@ -1,3 +1,12 @@ +2023-01-22 Karl Berry <karl@freefriends.org> + + * configure.ac (KPSE_CANONICAL_HOST): call this, + since we use $host_cpu in the optimization checks. + Else could be determined wrong. Report from Dick Koch, + karl mail 22 Jan 2023 00:43:11. + (PNG_ARM_NEON, PNG_POWERPC_VSX): report results; + also sync comments with upstream (trivial typos). + 2022-11-21 Akira Kakuto <kakuto@jcom.zaq.ne.jp> Import libpng-1.6.39. diff --git a/Build/source/libs/libpng/Makefile.in b/Build/source/libs/libpng/Makefile.in index ac89bcea608..7f7d404fc50 100644 --- a/Build/source/libs/libpng/Makefile.in +++ b/Build/source/libs/libpng/Makefile.in @@ -86,6 +86,8 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ @PNG_ARM_NEON_TRUE@am__append_1 = @LIBPNG_TREE@/arm/arm_init.c\ @PNG_ARM_NEON_TRUE@ @LIBPNG_TREE@/arm/filter_neon.S @LIBPNG_TREE@/arm/filter_neon_intrinsics.c \ @PNG_ARM_NEON_TRUE@ @LIBPNG_TREE@/arm/palette_neon_intrinsics.c @@ -454,6 +456,8 @@ am__DIST_COMMON = $(srcdir)/../../am/dist_hook.am \ $(srcdir)/../../am/rebuild.am $(srcdir)/../../am/reconfig.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/../../build-aux/compile \ + $(top_srcdir)/../../build-aux/config.guess \ + $(top_srcdir)/../../build-aux/config.sub \ $(top_srcdir)/../../build-aux/depcomp \ $(top_srcdir)/../../build-aux/install-sh \ $(top_srcdir)/../../build-aux/missing \ @@ -580,14 +584,22 @@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ +build = @build@ build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ +host = @host@ host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ diff --git a/Build/source/libs/libpng/aclocal.m4 b/Build/source/libs/libpng/aclocal.m4 index 8c7b07821de..881457a9e3e 100644 --- a/Build/source/libs/libpng/aclocal.m4 +++ b/Build/source/libs/libpng/aclocal.m4 @@ -128,6 +128,43 @@ AC_DEFUN([AM_AUX_DIR_EXPAND], am_aux_dir=`cd "$ac_aux_dir" && pwd` ]) +# AM_COND_IF -*- Autoconf -*- + +# Copyright (C) 2008-2021 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_COND_IF +# _AM_COND_ELSE +# _AM_COND_ENDIF +# -------------- +# These macros are only used for tracing. +m4_define([_AM_COND_IF]) +m4_define([_AM_COND_ELSE]) +m4_define([_AM_COND_ENDIF]) + +# AM_COND_IF(COND, [IF-TRUE], [IF-FALSE]) +# --------------------------------------- +# If the shell condition COND is true, execute IF-TRUE, otherwise execute +# IF-FALSE. Allow automake to learn about conditional instantiating macros +# (the AC_CONFIG_FOOS). +AC_DEFUN([AM_COND_IF], +[m4_ifndef([_AM_COND_VALUE_$1], + [m4_fatal([$0: no such condition "$1"])])dnl +_AM_COND_IF([$1])dnl +if test -z "$$1_TRUE"; then : + m4_n([$2])[]dnl +m4_ifval([$3], +[_AM_COND_ELSE([$1])dnl +else + $3 +])dnl +_AM_COND_ENDIF([$1])dnl +fi[]dnl +]) + # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997-2021 Free Software Foundation, Inc. diff --git a/Build/source/libs/libpng/configure b/Build/source/libs/libpng/configure index 57d56fd68bd..c50451e4232 100755 --- a/Build/source/libs/libpng/configure +++ b/Build/source/libs/libpng/configure @@ -676,6 +676,14 @@ am__fastdepCCAS_TRUE CCASDEPMODE CCASFLAGS CCAS +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build WARNING_CFLAGS am__fastdepCC_FALSE am__fastdepCC_TRUE @@ -1400,6 +1408,10 @@ Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi @@ -2433,7 +2445,7 @@ as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H" as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H" # Auxiliary files required by this configure script. -ac_aux_files="compile missing install-sh" +ac_aux_files="config.guess config.sub compile missing install-sh" # Locations in which to look for auxiliary files. ac_aux_dir_candidates="${srcdir}/../../build-aux" @@ -4601,6 +4613,89 @@ WARNING_CFLAGS=$kpse_cv_warning_cflags +# Because we use $host_cpu below. + + + # Make sure we can run config.sub. +$SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5 + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +printf %s "checking build system type... " >&6; } +if test ${ac_cv_build+y} +then : + printf %s "(cached) " >&6 +else $as_nop + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +printf "%s\n" "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +printf %s "checking host system type... " >&6; } +if test ${ac_cv_host+y} +then : + printf %s "(cached) " >&6 +else $as_nop + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` || + as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +printf "%s\n" "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +if test "x$host_alias" != x && test "x$build_alias" = x +then : + as_fn_error $? "when cross-compiling you must specify both --host and --build." "$LINENO" 5 +fi +eval kpse_build_alias=\${build_alias-$build} + + ac_config_headers="$ac_config_headers config.h" @@ -6582,7 +6677,7 @@ then : printf "%s\n" "#define PNG_ARM_NEON_OPT 0" >>confdefs.h # Prevent inclusion of the assembler files below: - enable_arm_neon=no;; + enable_arm_neon=no ;; check) printf "%s\n" "#define PNG_ARM_NEON_CHECK_SUPPORTED /**/" >>confdefs.h @@ -6607,14 +6702,14 @@ printf "%s\n" "$as_me: WARNING: --enable-arm-neon: please specify 'check' or 'ap fi -# Add ARM specific files to all builds where the host_cpu is arm ('arm*') or -# where ARM optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'arm*') +# Add ARM-specific files to all builds where the host_cpu is arm ('arm*') or +# where ARM optimizations were explicitly requested (this allows a fallback +# if a future host CPU does not match 'arm*') if test "$enable_arm_neon" != 'no' && case "$host_cpu" in - arm*|aarch64*) :;; - *) test "$enable_arm_neon" != '';; + arm*|aarch64*) : ;; + *) test "$enable_arm_neon" != '' ;; esac; then PNG_ARM_NEON_TRUE= PNG_ARM_NEON_FALSE='#' @@ -6624,6 +6719,14 @@ else fi +if test -z "$PNG_ARM_NEON_TRUE"; then : + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: arm_neon opts on (host_cpu=$host_cpu)" >&5 +printf "%s\n" "$as_me: arm_neon opts on (host_cpu=$host_cpu)" >&6;} +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: arm_neon opts off (host_cpu=$host_cpu)" >&5 +printf "%s\n" "$as_me: arm_neon opts off (host_cpu=$host_cpu)" >&6;} +fi + # emacs-page # PowerPC # === @@ -6639,8 +6742,8 @@ then : printf "%s\n" "#define PNG_POWERPC_VSX_OPT 0" >>confdefs.h - # Prevent inclusion of the platform specific files below: - enable_powerpc_vsx=no;; + # Prevent inclusion of the platform-specific files below: + enable_powerpc_vsx=no ;; check) printf "%s\n" "#define PNG_POWERPC_VSX_CHECK_SUPPORTED /**/" >>confdefs.h @@ -6659,23 +6762,23 @@ printf "%s\n" "#define PNG_POWERPC_VSX_OPT 2" >>confdefs.h { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: --enable-powerpc-vsx: please specify 'check' or 'api', if you want the optimizations unconditionally pass '-maltivec -mvsx' - or '-mcpu=power8'to the compiler." >&5 + or '-mcpu=power8' to the compiler." >&5 printf "%s\n" "$as_me: WARNING: --enable-powerpc-vsx: please specify 'check' or 'api', if you want the optimizations unconditionally pass '-maltivec -mvsx' - or '-mcpu=power8'to the compiler." >&2;};; + or '-mcpu=power8' to the compiler." >&2;};; *) as_fn_error $? "--enable-powerpc-vsx=${enable_powerpc_vsx}: invalid value" "$LINENO" 5 esac fi -# Add PowerPC specific files to all builds where the host_cpu is powerpc('powerpc*') or -# where POWERPC optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'powerpc*') +# Add PowerPC-specific files to all builds where $host_cpu is powerpc('powerpc*') +# or where PowerPC optimizations were explicitly requested (this allows a fallback +# if a future host CPU does not match 'powerpc*') if test "$enable_powerpc_vsx" != 'no' && case "$host_cpu" in - powerpc*|ppc64*) :;; + powerpc*|ppc64*) : ;; esac; then PNG_POWERPC_VSX_TRUE= PNG_POWERPC_VSX_FALSE='#' @@ -6684,8 +6787,13 @@ else PNG_POWERPC_VSX_FALSE= fi - - +if test -z "$PNG_POWERPC_VSX_TRUE"; then : + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: powerpc_vsx opts on (host_cpu=$host_cpu)" >&5 +printf "%s\n" "$as_me: powerpc_vsx opts on (host_cpu=$host_cpu)" >&6;} +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: powerpc_vsx opts off (host_cpu=$host_cpu)" >&5 +printf "%s\n" "$as_me: powerpc_vsx opts off (host_cpu=$host_cpu)" >&6;} +fi ac_config_files="$ac_config_files Makefile include/Makefile" diff --git a/Build/source/libs/libpng/configure.ac b/Build/source/libs/libpng/configure.ac index c6b07e70410..ade69b838fc 100644 --- a/Build/source/libs/libpng/configure.ac +++ b/Build/source/libs/libpng/configure.ac @@ -1,7 +1,7 @@ dnl $Id$ dnl Process this file with autoconf to produce a configure script. dnl -dnl Copyright 2016-2020 Karl Berry <tex-live@tug.org> +dnl Copyright 2016-2023 Karl Berry <tex-live@tug.org> dnl Copyright 2009-2015 Peter Breitenlohner <tex-live@tug.org> dnl dnl This file is free software; the copyright holder @@ -17,6 +17,9 @@ AC_CONFIG_MACRO_DIR([../../m4]) KPSE_BASIC([libpng]) +# Because we use $host_cpu below. +KPSE_CANONICAL_HOST + AC_CONFIG_HEADERS([config.h]) AC_PROG_CC @@ -96,7 +99,7 @@ AC_ARG_ENABLE([arm-neon], AC_DEFINE([PNG_ARM_NEON_OPT], [0], [Disable ARM Neon optimizations]) # Prevent inclusion of the assembler files below: - enable_arm_neon=no;; + enable_arm_neon=no ;; check) AC_DEFINE([PNG_ARM_NEON_CHECK_SUPPORTED], [], [Check for ARM Neon support at run-time]);; @@ -113,17 +116,22 @@ AC_ARG_ENABLE([arm-neon], AC_MSG_ERROR([--enable-arm-neon=${enable_arm_neon}: invalid value]) esac]) -# Add ARM specific files to all builds where the host_cpu is arm ('arm*') or -# where ARM optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'arm*') +# Add ARM-specific files to all builds where the host_cpu is arm ('arm*') or +# where ARM optimizations were explicitly requested (this allows a fallback +# if a future host CPU does not match 'arm*') AM_CONDITIONAL([PNG_ARM_NEON], [test "$enable_arm_neon" != 'no' && case "$host_cpu" in - arm*|aarch64*) :;; - *) test "$enable_arm_neon" != '';; + arm*|aarch64*) : ;; + *) test "$enable_arm_neon" != '' ;; esac]) +AM_COND_IF([PNG_ARM_NEON], + AC_MSG_NOTICE([[arm_neon opts on (host_cpu=$host_cpu)]]), + AC_MSG_NOTICE([[arm_neon opts off (host_cpu=$host_cpu)]]), +) + # emacs-page # PowerPC # === @@ -142,8 +150,8 @@ AS_HELP_STRING([[[--enable-powerpc-vsx]]], # disable the default enabling on __ppc64__ systems: AC_DEFINE([PNG_POWERPC_VSX_OPT], [0], [Disable POWERPC VSX optimizations]) - # Prevent inclusion of the platform specific files below: - enable_powerpc_vsx=no;; + # Prevent inclusion of the platform-specific files below: + enable_powerpc_vsx=no ;; check) AC_DEFINE([PNG_POWERPC_VSX_CHECK_SUPPORTED], [], [Check for POWERPC VSX support at run-time]) @@ -157,22 +165,24 @@ AS_HELP_STRING([[[--enable-powerpc-vsx]]], [Enable POWERPC VSX optimizations]) AC_MSG_WARN([--enable-powerpc-vsx: please specify 'check' or 'api', if] [you want the optimizations unconditionally pass '-maltivec -mvsx'] - [or '-mcpu=power8'to the compiler.]);; + [or '-mcpu=power8' to the compiler.]);; *) AC_MSG_ERROR([--enable-powerpc-vsx=${enable_powerpc_vsx}: invalid value]) esac]) -# Add PowerPC specific files to all builds where the host_cpu is powerpc('powerpc*') or -# where POWERPC optimizations were explicitly requested (this allows a fallback if a -# future host CPU does not match 'powerpc*') +# Add PowerPC-specific files to all builds where $host_cpu is powerpc('powerpc*') +# or where PowerPC optimizations were explicitly requested (this allows a fallback +# if a future host CPU does not match 'powerpc*') AM_CONDITIONAL([PNG_POWERPC_VSX], [test "$enable_powerpc_vsx" != 'no' && case "$host_cpu" in - powerpc*|ppc64*) :;; + powerpc*|ppc64*) : ;; esac]) - - +AM_COND_IF([PNG_POWERPC_VSX], + AC_MSG_NOTICE([[powerpc_vsx opts on (host_cpu=$host_cpu)]]), + AC_MSG_NOTICE([[powerpc_vsx opts off (host_cpu=$host_cpu)]]), +) AC_CONFIG_FILES([Makefile include/Makefile]) AC_OUTPUT diff --git a/Build/source/libs/libpng/include/Makefile.in b/Build/source/libs/libpng/include/Makefile.in index 07be0edec0a..efb05a4d0cf 100644 --- a/Build/source/libs/libpng/include/Makefile.in +++ b/Build/source/libs/libpng/include/Makefile.in @@ -85,6 +85,8 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ subdir = include ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \ @@ -194,14 +196,22 @@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ +build = @build@ build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ +host = @host@ host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ |