diff options
Diffstat (limited to 'Build/source/utils/vlna')
| -rw-r--r-- | Build/source/utils/vlna/ChangeLog | 16 | ||||
| -rw-r--r-- | Build/source/utils/vlna/Makefile.am | 15 | ||||
| -rw-r--r-- | Build/source/utils/vlna/Makefile.in | 28 | ||||
| -rwxr-xr-x | Build/source/utils/vlna/configure | 245 | ||||
| -rw-r--r-- | Build/source/utils/vlna/configure.ac | 33 | ||||
| -rwxr-xr-x | Build/source/utils/vlna/depcomp | 589 | ||||
| -rwxr-xr-x | Build/source/utils/vlna/install-sh | 520 | ||||
| -rwxr-xr-x | Build/source/utils/vlna/missing | 376 |
8 files changed, 131 insertions, 1691 deletions
diff --git a/Build/source/utils/vlna/ChangeLog b/Build/source/utils/vlna/ChangeLog index 097f38872f1..0e8b97685c3 100644 --- a/Build/source/utils/vlna/ChangeLog +++ b/Build/source/utils/vlna/ChangeLog @@ -1,3 +1,14 @@ +2009-05-07 Peter Breitenlohner <peb@mppmu.mpg.de> + + Adapt to TL2009 build system. + + * configure.ac (AC_CONFIG_AUX_DIR): Use auxiliary files from + ../../build-aux in TeX Live tree. + + * Makefile.am, configure.ac: Use the Automake conditional + do_cweb for regeneration of vlna.{c,tex,dvi} from vlna.w; + thus, e.g., missing csplain does not disable maintainer mode. + 2008-07-04 Peter Breitenlohner <peb@mppmu.mpg.de> * vlna.idx, vlna.scn (new): Add these files required to build @@ -7,7 +18,7 @@ 2008-07-01 Peter Breitenlohner <peb@mppmu.mpg.de> * vlna.dvi: new version from Zdenek, keep it here because it is - required for 'make dist (copy in Master/texmf/doc/vlna/). + required for 'make dist' (copy in Master/texmf/doc/vlna/). 2008-06-26 Peter Breitenlohner <peb@mppmu.mpg.de> @@ -17,4 +28,5 @@ 2008-06-25 Peter Breitenlohner <peb@mppmu.mpg.de> Autoconfiscated vlna-1.2, imported from - ftp://math.feld.cvut.cz/pub/olsak/vlna.
\ No newline at end of file + ftp://math.feld.cvut.cz/pub/olsak/vlna. + diff --git a/Build/source/utils/vlna/Makefile.am b/Build/source/utils/vlna/Makefile.am index 2de8c38680c..3a0be0fd53c 100644 --- a/Build/source/utils/vlna/Makefile.am +++ b/Build/source/utils/vlna/Makefile.am @@ -1,5 +1,8 @@ -# Makefile.am -- Peter Breitenlohner <peb@mppmu.mpg.de> -- Public domain. - +## Makefile.am for the TeX Live subdirectory utils/vlna/ +## +## Copyright (C) 2008, 2009 Peter Breitenlohner <tex-live@tug.org> +## You may freely use, modify and/or distribute this file. +## bin_PROGRAMS = vlna dist_man1_MANS = vlna.man @@ -22,15 +25,15 @@ vlna.dvi: vlna.tex vlna.idx vlna.scn # up to date (even if vlna.tex is up to date). Thus the sub-make. # vlna.tex vlna.idx vlna.scn: vlna.w - $(MAKE) do-cweave + $(MAKE) $(AM_MAKEFLAGS) do-cweave do-cweave: vlna.w .FORCE $(CWEAVE) $< .PHONY: do-cweave .FORCE -if MAINTAINER_MODE +if do_cweb all-local: vlna.dvi vlna.c: vlna.w $(CTANGLE) $< -else +else !do_cweb all-local: -endif +endif !do_cweb diff --git a/Build/source/utils/vlna/Makefile.in b/Build/source/utils/vlna/Makefile.in index 22d1b647280..5a58ca517c9 100644 --- a/Build/source/utils/vlna/Makefile.in +++ b/Build/source/utils/vlna/Makefile.in @@ -14,8 +14,6 @@ @SET_MAKE@ -# Makefile.am -- Peter Breitenlohner <peb@mppmu.mpg.de> -- Public domain. - VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -35,8 +33,14 @@ POST_UNINSTALL = : bin_PROGRAMS = vlna$(EXEEXT) subdir = . DIST_COMMON = README $(am__configure_deps) $(dist_man1_MANS) \ - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/configure ChangeLog depcomp install-sh missing + $(srcdir)/../../build-aux/depcomp \ + $(srcdir)/../../build-aux/install-sh \ + $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/configure \ + ../../build-aux/config.guess ../../build-aux/config.sub \ + ../../build-aux/depcomp ../../build-aux/install-sh \ + ../../build-aux/ltmain.sh ../../build-aux/missing \ + ../../build-aux/texinfo.tex ../../build-aux/ylwrap ChangeLog ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -52,7 +56,7 @@ vlna_SOURCES = vlna.c vlna_OBJECTS = vlna.$(OBJEXT) vlna_LDADD = $(LDADD) DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/depcomp +depcomp = $(SHELL) $(top_srcdir)/../../build-aux/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @@ -72,7 +76,7 @@ am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print @@ -372,7 +376,6 @@ distdir: $(DISTFILES) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) - dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) @@ -396,6 +399,7 @@ dist-zip: distdir dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -588,15 +592,15 @@ vlna.dvi: vlna.tex vlna.idx vlna.scn # up to date (even if vlna.tex is up to date). Thus the sub-make. # vlna.tex vlna.idx vlna.scn: vlna.w - $(MAKE) do-cweave + $(MAKE) $(AM_MAKEFLAGS) do-cweave do-cweave: vlna.w .FORCE $(CWEAVE) $< .PHONY: do-cweave .FORCE -@MAINTAINER_MODE_TRUE@all-local: vlna.dvi -@MAINTAINER_MODE_TRUE@vlna.c: vlna.w -@MAINTAINER_MODE_TRUE@ $(CTANGLE) $< -@MAINTAINER_MODE_FALSE@all-local: +@do_cweb_TRUE@all-local: vlna.dvi +@do_cweb_TRUE@vlna.c: vlna.w +@do_cweb_TRUE@ $(CTANGLE) $< +@do_cweb_FALSE@all-local: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/Build/source/utils/vlna/configure b/Build/source/utils/vlna/configure index 19f0b7589d5..762d05f141e 100755 --- a/Build/source/utils/vlna/configure +++ b/Build/source/utils/vlna/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.63 for vlna 1.3. +# Generated by GNU Autoconf 2.63 for vlna for TeX Live 1.3. # # Report bugs to <tex-live@tug.org>. # @@ -594,18 +594,17 @@ MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. -PACKAGE_NAME='vlna' -PACKAGE_TARNAME='vlna' +PACKAGE_NAME='vlna for TeX Live' +PACKAGE_TARNAME='vlna-for-tex-live' PACKAGE_VERSION='1.3' -PACKAGE_STRING='vlna 1.3' +PACKAGE_STRING='vlna for TeX Live 1.3' PACKAGE_BUGREPORT='tex-live@tug.org' ac_unique_file="vlna.w" ac_subst_vars='LTLIBOBJS LIBOBJS -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE +do_cweb_FALSE +do_cweb_TRUE CSPLAIN CWEAVE CTANGLE @@ -625,6 +624,9 @@ CPPFLAGS LDFLAGS CFLAGS CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE am__untar am__tar AMTAR @@ -688,8 +690,8 @@ SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking -enable_dependency_tracking enable_maintainer_mode +enable_dependency_tracking ' ac_precious_vars='build_alias host_alias @@ -1251,7 +1253,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures vlna 1.3 to adapt to many kinds of systems. +\`configure' configures vlna for TeX Live 1.3 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1299,7 +1301,8 @@ Fine tuning of the installation directories: --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/vlna] + --docdir=DIR documentation root + [DATAROOTDIR/doc/vlna-for-tex-live] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] @@ -1317,7 +1320,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of vlna 1.3:";; + short | recursive ) echo "Configuration of vlna for TeX Live 1.3:";; esac cat <<\_ACEOF @@ -1325,10 +1328,10 @@ Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors Some influential environment variables: CC C compiler command @@ -1405,7 +1408,7 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -vlna configure 1.3 +vlna for TeX Live configure 1.3 generated by GNU Autoconf 2.63 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, @@ -1419,7 +1422,7 @@ cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by vlna $as_me 1.3, which was +It was created by vlna for TeX Live $as_me 1.3, which was generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ @@ -1789,10 +1792,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -am__api_version='1.10' - ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do +for ac_dir in ../../build-aux "$srcdir"/../../build-aux; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -1808,8 +1809,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do fi done if test -z "$ac_aux_dir"; then - { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../build-aux \"$srcdir\"/../../build-aux" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in ../../build-aux \"$srcdir\"/../../build-aux" >&2;} { (exit 1); exit 1; }; } fi @@ -1822,6 +1823,9 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + +am__api_version='1.10' + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -2136,7 +2140,7 @@ fi # Define the identity of the package. - PACKAGE='vlna' + PACKAGE='vlna-for-tex-live' VERSION='1.3' @@ -2270,6 +2274,29 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' +{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3374,131 +3401,9 @@ else fi -{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - -done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - +# With --enable-maintainer-mode we may want to regenerate +# vlna.c, vlna.tex, and vlna.dvi, this requires ctangle, cweave, and csplain. for ac_prog in ctangle do # Extract the first word of "$ac_prog", so it can be a program name with args. @@ -3629,37 +3534,24 @@ done test -n "$CSPLAIN" || CSPLAIN="none" -if test x"$enable_maintainer_mode" = xyes; then +do_cweb=$enable_maintainer_mode +if test x"$do_cweb" = xyes; then case :$CTANGLE:$CWEAVE:$CSPLAIN: in *:none:*) - { $as_echo "$as_me:$LINENO: WARNING: Maintainer mode disabled -- requires ctangle, cweave, and csplain." >&5 -$as_echo "$as_me: WARNING: Maintainer mode disabled -- requires ctangle, cweave, and csplain." >&2;} - enable_maintainer_mode=no + { $as_echo "$as_me:$LINENO: WARNING: Can not regenerate vlna.c, vlna.tex, and vlna.dvi -- requires ctangle, cweave, and csplain." >&5 +$as_echo "$as_me: WARNING: Can not regenerate vlna.c, vlna.tex, and vlna.dvi -- requires ctangle, cweave, and csplain." >&2;} + do_cweb=no ;; esac fi - -{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi - - { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' + if test "x$do_cweb" = xyes; then + do_cweb_TRUE= + do_cweb_FALSE='#' else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= + do_cweb_TRUE='#' + do_cweb_FALSE= fi - MAINT=$MAINTAINER_MODE_TRUE - ac_config_files="$ac_config_files Makefile" @@ -3796,6 +3688,13 @@ LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 @@ -3810,10 +3709,10 @@ $as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +if test -z "${do_cweb_TRUE}" && test -z "${do_cweb_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"do_cweb\" was never defined. Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +$as_echo "$as_me: error: conditional \"do_cweb\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi @@ -4139,7 +4038,7 @@ exec 6>&1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by vlna $as_me 1.3, which was +This file was extended by vlna for TeX Live $as_me 1.3, which was generated by GNU Autoconf 2.63. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -4193,7 +4092,7 @@ Report bugs to <bug-autoconf@gnu.org>." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ -vlna config.status 1.3 +vlna for TeX Live config.status 1.3 configured by $0, generated by GNU Autoconf 2.63, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" diff --git a/Build/source/utils/vlna/configure.ac b/Build/source/utils/vlna/configure.ac index 750d233936d..c81fcbc651d 100644 --- a/Build/source/utils/vlna/configure.ac +++ b/Build/source/utils/vlna/configure.ac @@ -1,31 +1,38 @@ -dnl configure.ac -- Peter Breitenlohner <peb@mppmu.mpg.de> -- Public domain. - -AC_PREREQ(2.60) -AC_INIT([vlna], [1.3], [tex-live@tug.org]) +dnl Process this file with autoconf to produce a configure script. +dnl +dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org> +dnl +dnl This file is free software; the copyright holder +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +AC_INIT([vlna for TeX Live], [1.3], [tex-live@tug.org]) +AC_PREREQ([2.63]) AC_CONFIG_SRCDIR([vlna.w]) +AC_CONFIG_AUX_DIR([../../build-aux]) -AM_INIT_AUTOMAKE([foreign no-define])dnl using automake +AM_INIT_AUTOMAKE([foreign dist-bzip2 no-define]) +AM_MAINTAINER_MODE # Checks for programs. AC_PROG_CC -AC_PROG_MAKE_SET -AC_PROG_INSTALL -dnl Maintainer mode requires ctangle, cweave, and csplain +# With --enable-maintainer-mode we may want to regenerate +# vlna.c, vlna.tex, and vlna.dvi, this requires ctangle, cweave, and csplain. AC_CHECK_PROGS([CTANGLE], [ctangle], [none]) AC_CHECK_PROGS([CWEAVE], [cweave], [none]) AC_CHECK_PROGS([CSPLAIN], [csplain], [none]) -if test x"$enable_maintainer_mode" = xyes; then +do_cweb=$enable_maintainer_mode +if test x"$do_cweb" = xyes; then case :$CTANGLE:$CWEAVE:$CSPLAIN: in *:none:*) - AC_MSG_WARN([Maintainer mode disabled -- requires ctangle, cweave, and csplain.]) - enable_maintainer_mode=no + AC_MSG_WARN([Can not regenerate vlna.c, vlna.tex, and vlna.dvi -- requires ctangle, cweave, and csplain.]) + do_cweb=no ;; esac fi - -AM_MAINTAINER_MODE[]dnl maintainer mode only if requested +AM_CONDITIONAL([do_cweb], [test "x$do_cweb" = xyes]) AC_CONFIG_FILES([Makefile]) AC_OUTPUT diff --git a/Build/source/utils/vlna/depcomp b/Build/source/utils/vlna/depcomp deleted file mode 100755 index e5f9736c723..00000000000 --- a/Build/source/utils/vlna/depcomp +++ /dev/null @@ -1,589 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2007-03-29.01 - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software -# Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to <bug-automake@gnu.org>. -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no - for arg in "$@"; do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - "$@" || exit $? - IFS=" " - for arg - do - case "$arg" in - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/Build/source/utils/vlna/install-sh b/Build/source/utils/vlna/install-sh deleted file mode 100755 index 6781b987bdb..00000000000 --- a/Build/source/utils/vlna/install-sh +++ /dev/null @@ -1,520 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2009-04-28.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/Build/source/utils/vlna/missing b/Build/source/utils/vlna/missing deleted file mode 100755 index 727cfa0a15e..00000000000 --- a/Build/source/utils/vlna/missing +++ /dev/null @@ -1,376 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2009-04-28.21; # UTC - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. - -Send bug reports to <bug-automake@gnu.org>." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: |