diff options
Diffstat (limited to 'Build/source/utils/chktex/chktex-1.6.4/chktexrc')
| -rw-r--r-- | Build/source/utils/chktex/chktex-1.6.4/chktexrc | 678 |
1 files changed, 0 insertions, 678 deletions
diff --git a/Build/source/utils/chktex/chktex-1.6.4/chktexrc b/Build/source/utils/chktex/chktex-1.6.4/chktexrc deleted file mode 100644 index d6f288a6690..00000000000 --- a/Build/source/utils/chktex/chktex-1.6.4/chktexrc +++ /dev/null @@ -1,678 +0,0 @@ -## -## ChkTeX, example resource file for ChkTeX. -## Copyright (C) 1995-96 Jens T. Berger Thielemann -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -## -## Contact the author at: -## Jens Berger -## Spektrumvn. 4 -## N-0666 Oslo -## Norway -## E-mail: <jensthi@ifi.uio.no> -## - -##################################################################### -# -# Note: The format has changed slightly (again). The { ... } -# syntax does now mean case-sensitive comparing, while [ ... ] means -# case-insensitive comparing of the keywords. Case-insensitive -# comparing of the keywords is only supported on a few of the -# keywords (it's not meaningful in all contexts, and it slows ChkTeX -# down). Keywords supporting this are marked throughout the file. -# -# You may also reset a list by saying "KEYWORD = { ... }"; it will -# then be set equal to the contents of the list you specify. -# -# Comments begin with `#', and continues for the rest of the line. -# Blank lines plus leading and trailing spaces are of course ignored. -# -# The general format of this file is the following: -# -# KEYWORD { item item ...} [ item item ... ] /* Adds items */ -# -# KEYWORD [ item item ...] { item item ... } /* Adds items */ -# -# KEYWORD = item -# -# KEYWORD = { item item ... } /* Clears list before adding */ -# -# KEYWORD = [ item item ... ] /* Clears list before adding */ -# -# This does _not_ mean that you may alternate the forms; certain -# keywords demands a list, other a single value. You thus have to -# look at the examples of their use. -# -# Please also note that if you specify a list-keyword twice, we'll -# concatenate the lists. If you you specify a item-keyword twice, -# we'll kill the previous value. -# -# We are slightly context-sensitive when detecting tokens like "}" -# and "]"; they have to be preceded by a space. This generally makes -# life easier. -# -# Items are separated by spaces. Newlines are considered as spaces, -# but can't be escaped. You may surround items with quotes (`"') to -# easily put spaces into them. -# -# Escape sequences available: -# -# Sequence Resulting character -# ! A space (type `! ', not just a exclamation mark) -# !" " -# !# # -# !! ! -# !{ { -# !} } -# ![ [ -# !] ] -# != = -# !b Backspace -# !n New line -# !r Carriage return -# !t Tab -# !f Form feed -# !xNN NN must be a hexadecimal number (00 - ff), -# _both_ characters must be included. -# !dNNN DDD must be a decimal number (000 - 255), all -# three characters must be included. Unspecified -# results if DDD > 255. -# !NNN DDD must be a octal number (000 - 377), all -# three characters must be included. Unspecified -# results if DDD > 377. -# -# Minor note: As you can see, most of these escape sequences are -# equal to those in C (with some extensions); however, we use ! -# instead of \ as escape character for obvious reasons. -# -# -# Quick summary of keywords follows. Keywords marked with a * accept -# keywords accepting case-insensitive lists. -# -# Abbrev* - A list of abbreviations not automatically catched. -# CenterDots - Commands/characters which should have \cdots in -# between. -# CmdLine - Default commandline options. These will be -# processed before the ones you give on the command -# line. -# HyphDash \ -# NumDash - No. of dashes allowed in different contexts. -# WordDash / -# IJAccent - Commands which puts an accent _over_ their -# argument. -# Italic - Commands immediately turning on italic mode. -# ItalCmd - Commands putting their argument into italic. -# Linker - Commands which should have a non-breaking space in -# front. -# LowDots - Commands/characters which should have \ldots in -# between. -# MathEnvir - Environments which turn on math mode. -# MathRoman - Mathematical operators with LaTeX replacement -# defined. -# NoCharNext - Insists on that certain commands aren't followed by -# certain characters. -# NonItalic - Commands immediately turning off italic mode. -# NotPreSpaced- Commands which should not have a space in front of -# them. -# Primitives - Primitive TeX commands. -# PostLink - Commands which generates a page reference. -# OutFormat - Formats to use for output. See the -f & -v switch -# in the main doc. -# QuoteStyle - Either "Traditional" or "Logical". See main doc, -# warning 38. -# Silent - These commands do not produce any textual output; -# and are thus allowed to have a space after them. -# TabSize - Tab size you are using. -# TeXInputs - Paths to search \input and \include files for. -# UserWarn* - These strings will be searched for throughout the -# text. -# VerbEnvir - Environments which contents should be ignored. -# VerbClear - String we will overwrite unwanted data with. -# WipeArg - Commands (with arguments) which should be ignored -# in the checking. -# - - -##################################################################### -# -# Enter which type of quote-style you are using here. Currently, we -# support the following styles: -# -# Style Example of use -# Traditional "An example," he said, "would be great." -# Logical "An example", he said, "would be great". -# - -QuoteStyle = Logical - -##################################################################### -# -# Enter here what interval you have between your tabs. Only regular -# intervals are supported. -# - -TabSize = 8 - -##################################################################### -# -# Here, you can put default commandline options; most users would for -# instance like to put -v2 here. -# - -CmdLine -{ - -} - -##################################################################### -# -# These patterns will be searched for through the text; no matter -# whether they appear as normal text, commands or whatever. -# Currently case-sensitive. -# -# I usually define a special command like this: -# -# \def\unknown{\large\bf??} -# -# which I use whenever there is some information I don't have at the -# moment of writing. Thus, it makes sense to search for it. -# -# You should be able to develop your own uses for this. -# - -UserWarn -{ - - \unknown -### -# -# Another example; one should write \chktex or Chk\TeX - never ChkTeX. -# -### - - ChkTeX -} -[ - -### -# -# You may put case-insensitive patterns here. -# -### - -] - -##################################################################### -# -# Here you can list the path of where ChkTeX should look for files it -# \inputs. The // postfix is now supported; if you append a double -# path-separator we'll recursively search that directory directories. -# MS-DOS users must append \\ instead, e.g. "C:\EMTEX\\". -# -# If you under either MS-DOS or UNIX wish to search an entire -# partition or the complete directory tree, you must use *three* -# slashes, e.g. "c:\\\" or "///". This may be considered to be a bug. -# -# By default, we'll search the current directory (not recursively, -# put "//" in the list for this); any paths specified below will be -# searched in addition to this. -# - -TeXInputs -{ - -} - -##################################################################### -# -# Here you may specify more outputformats for use with the -v option, -# it simply indexes into this list. Remember to use ! instead of \, -# though. -# -# For explanation of how % fields expand; look at ChkTeX.{dvi,ps}. -# -# We will by default select entry number _two_ in this list (we count -# from 0), and -v without any parameter selects entry number _three_. -# - -OutFormat -{ - -# -v0; silent mode -%f%b%l%b%c%b%n%b%m!n - -# -v1; normal mode -"%k %n in %f line %l: %m!n%r%s%t!n%u!n" - -# -v2; fancy mode -"%k %n in %f line %l: %m!n%r%i%s%I%t!n!n" - -# -v3; lacheck mode -"!"%f!", line %l: %m!n" - -# -v4; verbose lacheck mode -"!"%f!", line %l: %m!n%r%s%t!n%u!n" - -# -v5; no line number, ease auto-test -"%k %n in %f: %m!n%r%s%t!n%u!n" - -} - - - -##################################################################### -# -# These commands should be ignored when detecting whether a command -# is ended by a space. -# - -Silent -{ - \rm \em \bf \it \sl \sf \sc \tt \selectfont - \rmfamily \sffamily \ttfamily \mdseries \bfseries - \slshape \scshape \relax - \vskip \pagebreak \nopagebreak - - \textrm \textem \textbf \textit \textsl \textsf \textsc \texttt - - \clearpage \ddots \dotfill \flushbottom \fussy \indent \linebreak - \onecolumn \pagebreak \pushtabs \poptabs \scriptsize \sloppy - \twocolumn \vdots - \today \kill \newline \thicklines \thinlines - - \columnsep \space \item \tiny \footnotesize \small \normalsize - \normal \large \Large \LARGE \huge \Huge \printindex - - \newpage \listoffigures \listoftables \tableofcontents - \maketitle \makeindex - - \hline \hrule \vrule - - \centering - - \bigskip \medskip \smallskip - - \noindent \expandafter - - \makeatletter \makeatother - - \columnseprule - - \textwidth \textheight \hsize \vsize - - \if \fi - - \csname \endcsname - - \z@ \p@ \@warning \typeout - - \dots \ldots \input \endinput \nextline \leavevmode \cdots -- \appendix \listfiles \and \quad - \vfill \vfil \hfill \hfil \topmargin \oddsidemargin - \frenchspacing \nonfrenchspacing - \begingroup \endgroup \par - - \vrefwarning \upshape \headheight \headsep \hoffset \voffset - \cdot \qquad - \left \right -} - -##################################################################### -# -# Here, you can specify the length of various dashes. We sort the -# dash according to which type of characters that are on the left and -# right of of it. We are only conclusive if they are the same. -# -# We associate as follows: -# -# Name Type of character on each side -# HyphDash Alphabetic (foo-bar) -# NumDash Numeric (2--3) -# WordDash Space (like this --- see?) -# -# Below you specify how many dashes which are legal in each case. We -# define 0 as an magic constant which always generates an error. You -# may specify more than one legal dash-length. -# -# Let's look at an example. You use the following dash-syntax: -# -# foo-bar -# 2--3 -# like this---see? -# -# -# HYPHDASH { 1 3 } # Either a hyphen, or inter-word -# NUMDASH { 2 } # Between words -# WORDDASH { 0 } # We never use this -# - -HyphDash -{ - 1 3 -} - -NumDash -{ - 2 -} - -WordDash -{ - 3 -} - -##################################################################### -# -# This keyword indicates commands which argument isn't LaTeX code, -# and which thus should be ignored. -# -# After the command, you may place arguments that you wish that -# should be wiped in the process; use [] for optional arguments, {} -# for required ones and * if the command supports an alternative -# variant. These should be separated from the command with a colon. -# -# For instance, if you would like to wipe the \newcommand command, -# you would declare it as \newcommand:*[][]{} -# -# These commands may be "executed" before they're wiped, so you will -# typically also wish to list filehandling commands and similar here. -# - -WipeArg -{ - \label:{} \ref:{} \vref:{} \pageref:{} \index:{} \cite:[]{} - \input:{} \verbatiminput:[]{} \listinginput:[]{}{} - \verbatimtabinput:[]{} \include:{} \includeonly:{} - \bibitem:[]{} -} - -##################################################################### -# -# These environments contains material which will be typeset as -# mathematics by LaTeX. This turns on/off some warnings. -# -# We will automagically append a * to each keyword. -# - -MathEnvir -{ - displaymath math eqnarray array equation - align alignat gather flalign multline -} - -##################################################################### -# -# These environments contains material which contents should be -# ignored. -# -# We will automagically append a * to each keyword. -# - -VerbEnvir -{ - verbatim comment listing verbatimtab rawhtml errexam picture texdraw -} - -##################################################################### -# -# ChkTeX does automagically catch most abbreviations; the ones we -# need to list here, are those which are most likely to be followed -# by a word with an upper-case letter (that is not the beginning of a -# new sentence). -# -# The case-insensitive abbreviations are not really case-insensitive, -# it seems to be more practical to only let the first character be -# case-insensitive, while the remaining are case-sensitive. -# -# To speed up the searching process somewhat, we require that these -# end in a `.', this should not be a problem. -# -# Much of this work (both the abbreviations below, and the regexps -# necessary to catch the remaining automatically) have been provided -# by Russ Bubley, <russ@scs.leeds.ac.uk>. -# - - -Abbrev -{ -# Ordinals -1st. 2nd. 3rd. 4th. -# Titles -Mr. Mrs. Miss. Ms. Dr. Prof. St. - -# -# Days -# Mon. Tue. Wed. Thu. Fri. Sat. Sun. -# -# Months -# Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec. -# -# Letters -# Kt. Jr. -# -# Corporate -# Co. Ltd. -# -# Addresses -# Rd. Dr. St. Ave. Cres. Gdns. Sq. Circ. Terr. Pl. Arc. La. Clo. Ho. Est. Gn. -# -# Misc. -# oe. pbab. ps. rsvp. Tx. -} -[ -### -# -# The first letter is case-insensitive in the abbrevs in this -# list. Due to the nature of the checking algorithm used for -# this, entries consisting of only one character will be -# silently ignored. -# -## - -# Latin -# cf. "et al." etc. qed. qv. viz. -# -# Corporate -# inc. plc. -# -# Misc -# fax. pcs. qty. tel. misc. -] - -##################################################################### -# -# Commands which accent characters, meaning that \i or \j (\imath and -# \jmath in mathmode) should be used instead of `i' and `j' -# - -IJAccent -{ - \hat \check \breve \acute \grave \tilde \bar \vec \dot \ddot - - \' \` \^ \" \~ \= \. \u \v \H \t - -### -# -# The remaining accent commands (\c,\d,\b) put their accent _under_ -# the character, not above, and should thus be used with normal i's -# and j's. -# -### - -} - -##################################################################### -# -# Commands which, when the group is terminated, needs italic -# correction. -# - -Italic -{ - \it \em \sl - \itshape \slshape -} - -##################################################################### -# -# Commands which makes the font non-italic. -# - -NonItalic -{ - \bf \rm \sf \tt \sc - \upshape -} - -##################################################################### -# -# Commands which puts their argument into italic (and thus possibly -# needs italic correction in the end). -# -# This is currently empty, since \textit, \textsl and \emph do that -# automatically. -# - -ItalCmd -{ -} - -##################################################################### -# -# These commands all have in common that a pagebreak right in front -# of them is highly undesirable; thus there should be no space in -# front of them. -# - -PostLink -{ - \index \label -} - -##################################################################### -# -# These commands should not have a space in front of them for various -# reasons. I.e. much the same as POSTLINK, but produces another -# warning. -# - -NotPreSpaced -{ - \footnote \footnotemark \/ -} - -##################################################################### -# -# The commands listed here, should be prepended with a `~', as in -# "look in table~\ref{foo}", to avoid the references being split -# across lines. -# - -Linker -{ - \ref \vref \pageref \cite -} - -##################################################################### -# -# Commands/characters which should have \cdots in between, e.g. -# $1+2+3+\cdots+n$. -# - -CenterDots -{ - = + - \cdot \div & \times \geq \leq < > -} - -##################################################################### -# -# Commands/characters which should have \ldots in between, e.g. -# $1,2,3,\ldots,n$. -# - -LowDots -{ - . , ; -} - -##################################################################### -# -# In maths mode, there are certain aliases for mathematical operators -# like sin, cos, etc. Ignore the leading backslash in the commands, -# and so forth. You should list these below. -# - -MathRoman -{ - log lg ln lim limsup liminf sin arcsin sinh cos arccos cosh tan - arctan tanh cot coth sec csc max min sup inf arg ker dim hom det - exp Pr gcd deg bmod pmod mod -} - -##################################################################### -# -# These TeX commands have become unnecessary, as there are LaTeX cmds -# that does the same. Purists should thus avoid these in their code. -# -# (These are a spell-corrected version of those lacheck uses). -# - -Primitives -{ - \above \advance \catcode \chardef \closein \closeout \copy \count - \countdef \cr \crcr \csname \delcode \dimendef \dimen \divide - \expandafter \font \hskip \vskip \openout -} - -##################################################################### -# -# Format: \command:characters -# -# We'll emit a warning if any of characters are found after the -# command. -# - -NoCharNext -{ - \left:{}$ \right:{}$ -} - -##################################################################### -# -# We're killing \verb@...@ commands and the arguments of the commands -# listed above in WIPEARG by overwriting them with a string or a -# single character. -# -# This should not contain an alphabetic character (in case the user -# writes (\foo\verb@bar@), neither should it contain be one of LaTeX' -# reserved characters (`#$%&~_^\{}'), or any parenthesis character -# ('()[]{}'). If possible, don't use a punctuation character, -# either, or any spacing character. -# -# The asterix is also unsuitable, as some commands behave in another -# way if they are postpended with an asterix. Which more or less -# leaves us with the pipe. -# -# Please note that this may also be a _string_, which will be -# repeated until the proper length is reached. -# - -VerbClear = "|" - -# -# All for now - have fun. -# -##################################################################### - |