diff options
| -rw-r--r-- | Master/texmf-dist/tex/latex/resume/res.cls | 803 |
1 files changed, 803 insertions, 0 deletions
diff --git a/Master/texmf-dist/tex/latex/resume/res.cls b/Master/texmf-dist/tex/latex/resume/res.cls new file mode 100644 index 00000000000..e033d4a1524 --- /dev/null +++ b/Master/texmf-dist/tex/latex/resume/res.cls @@ -0,0 +1,803 @@ +% RESUME DOCUMENT STYLE -- Released 23 Nov 1989 +% for LaTeX version 2.09 +% Copyright (C) 1988,1989 by Michael DeCorte + +\typeout{Document Style `res' <26 Sep 89>.} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% res.sty +% +% \documentstyle{res} +% +% Copyright (c) 1988 by Michael DeCorte +% Permission to copy all or part of this work is granted, provided +% that the copies are not made or distributed for resale, and that +% the copyright notice and this notice are retained. +% +% THIS WORK IS PROVIDED ON AN "AS IS" BASIS. THE AUTHOR PROVIDES NO +% WARRANTY WHATSOEVER, EITHER EXPRESS OR IMPLIED, REGARDING THE WORK, +% INCLUDING WARRANTIES WITH RESPECT TO ITS MERCHANTABILITY OR FITNESS +% FOR ANY PARTICULAR PURPOSE. +% +% If you make any improvements, I'd like to hear about them. +% +% Michael DeCorte +% P.O. Box 652 +% Potsdam NY 13676 +% mrd@sun.soe.clarkson.edu +% mrd@clutx.bitnet +% +% Changes for LaTeX2e -- Venkat Krishnamurthy (Aug 7, 2001) +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% You can have multiple style options the legal options ones are: +% +% centered the name and address are centered at the top of the +% page (default) +% +% line the name is the left with a horizontal line then +% the address to the right +% +% overlapped the section titles overlap the body text (default) +% +% margin the section titles are to the left of the body text +% +% 11pt use 11 point fonts instead of 10 point fonts +% +% 12pt use 12 point fonts instead of 10 point fonts +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Commands +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% \Resume prints the word resume but typeset nicely +% +% \newsectionwidth{dimen} +% defines the amount of space the labels extend +% into the left margin. +% DO NOT TRY to change any of the dimensions +% yourself. You will probably confuse the style file. +% +% \name{text} defines your name +% +% \address{text} +% defines your address +% this can be called twice if you have two addresses +% use \\'s to indicate where either line breaks or +% comas should go +% +% \opening this prints your name and address at that spot +% this is not normally needed, as \begin{resume} +% does this but is provided just in case you need +% to do something odd +% +% \begin{resume} ... \end{resume} +% all of the resume should go inside of this +% environment +% +% \section{text} +% This prints 'text' in the left hand margin. +% Its exact placement depends on what the style +% options has been set to. (overlapped or margin) +% You should use \\ to start a new line. If the +% style option is margin, the \\ is converted +% to a space. +% To use this in any of the list environments, put +% the \section after the \item[] but before the +% text. +% Eg. +% \begin{itemize} +% \item\section{text} +% text +% \end{itemize} +% +% \begin{ncolumn}{n} ... \end{ncolumn} +% creates a tabular environment with n equally +% spaced columns. Separate columns by & and +% end them with \\ +% +% \begin{position} ... \end{position} +% this is used to print a job description. There should +% be only one job description in it. Information +% related to the job (such as title, dates...) will +% be printed. +% +% \begin{format} ... \end{format} +% used to change the default format for the position +% environment. Within it the recognized commands are: +% \title{option} +% \employer{option} +% \location{option} +% \dates{option} +% \body +% \\ +% where option is one of l,r,c standing for left, right, center. +% The format will eventually be used to make several +% tabular environments and you are defining the number of columns +% and the placement of text within the columns of the tabulars. +% Each row is terminated by a \\. Any number of options can +% be on a line, they will each be set in their own columns. +% Any of the options except \body may be left out. +% +% Eg. +% \begin{format} +% \title{l}\employer{r}\\ +% \dates{r}\\ +% \body\\ +% \location{l}\\ +% \end{format} +% +% In this example the title and employer information +% are set in 2 columns left justified and right justified +% respectively. Then the date is set right justified. +% Then the body is set. Then the location is set left +% justified. +% +% \employer{text} +% \title{text} +% \dates{text} +% \location{text} +% declare text for the next invocation of the position +% environment +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Glue +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% +% sectionskip the amount of horizontal before a section +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Dimensions +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% +% sectionwidth the amount that the section titles go in the +% left margin +% +% resumewidth the width of the total resume from the left +% margin to the right. Don't use textwidth +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Definitions +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% +% sectionfont the font used to print section titles +% use \renewcommand to change it +% +% namefont the font used to print your name +% use \renewcommand to change it +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% THINGS TO DO +% +% add lm,rm options to format style to allow things to be placed +% in the left or right margin respectivly +% +% add capability so that \body doesn't have to be proceeded (followed) +% by a \\ allowing part of the description (eg. location) to be the +% first (last) thing of the body +% +% clean up the list building procedures +% +% write docs to tell people how to use this + +\NeedsTeXFormat{LaTeX2e}[1995/12/01] +\ProvidesClass{res}[2000/05/19 v1.4b Resume class] + +%\DeclareOption{11pt}{\renewcommand\@ptsize{1}} +%\DeclareOption{12pt}{\renewcommand\@ptsize{2}} + +\PassOptionsToClass{11pt,12pt}{article} +\LoadClassWithOptions{article} + +\newif\if@line +\newif\if@margin + +\DeclareOption{line}{\@linetrue} +\DeclareOption{centered}{\@linefalse} + +\DeclareOption{margin}{\@margintrue} +\DeclareOption{overlapped}{\@marginfalse} + +\ExecuteOptions{overlapped,centered} +\ProcessOptions\relax + +\nofiles % resume's don't need .aux files + + +\newtoks\tabular@text % holds the current list being processed +\newtoks\tabular@head % holds the head tabular list +\newtoks\tabular@tail % holds the tail tabular list +\newtoks\@ta % used by \@append +\newtoks\undefined@token\undefined@token={} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% prints a centered name with the address centered +% or the two address on opposite sides of the page +% +\def\@printcentername{\begingroup + % print the name centered + \leavevmode\hbox to \textwidth{\hfil\@tablebox{\namefont\@name}\hfil}\par + \@ifundefined{@addressone}{% + % do nothing + }{% + \@ifundefined{@addresstwo}{ + % only one address + \leavevmode\hbox to \textwidth{\hfil\@tablebox{\@addressone}\hfil}\par + }{ + % two addresses + \leavevmode\hbox to \textwidth{\@tablebox{\@addressone}\hfil + \@tablebox{\@addresstwo}}\par + }% + }% +\endgroup} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% this is used to print the name and address at the top of +% the page with a hline in between +% +\def\namefont{\large\bf} +\def\@linename{\begingroup + \def\\{, } + {\namefont\@name} + \vskip 2pt + \fullline + \vskip 2pt + % where do you live? + \@ifundefined{@addressone}{% + % do nothing + }{% + \leavevmode\hbox to \textwidth + {\hfill\vbox{\hbox{\@addressone} + \hbox{\@addresstwo} + }% + }\par + } +\endgroup} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% HEADINGS: +% There are two types of headings: +% 1) one with the name centered and the address centered or +% in the left and right side if there are two address +% 2) one where the name is in the upper left corner +% the a line accross the paper +% then the address all on one line in the right corner +% the second address will be directly below the first if defined +% +\let\print@name\relax +\def\ds@centered{\ifx\print@name\relax\let\print@name\@printcentername\fi} +\def\ds@line{\ifx\print@name\relax\let\print@name\@linename\fi} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Use this to set the sectionwidth. +% It adjust the width of the text as well as the hoffset +% You probably shouldn't touch any of the size paramaters +% unless you really understand all of this but it is not +% hard. Either way, it can only be executed once +% +\def\sectionfont{\bf} +\newdimen\sectionwidth +\newskip\sectionskip +\newdimen\resumewidth + +\resumewidth=6.5in +\sectionskip=3.5ex plus 1ex minus -.2ex % values stolen from LaTeX + +\def\newsectionwidth#1{% + \sectionwidth=#1 + \textwidth=\resumewidth + \advance\textwidth-\sectionwidth + \hsize=\textwidth + \hoffset=\sectionwidth +} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% This is for sectiontitles that are entirely in the left margin. +% multiline sectiontitles are permited and will be broken by +% \TeX{} to fit into a box \verb|\sectionwidth| wide. It is advised +% that \verb|\\| be used to break the lines by hand as \TeX{} will +% probably not do what you want. +% +% When using this with {\tt tabbing} and {\tt list} (or anything +% that is made out of {\tt list}) put the \section's inside of +% the \verb|\begin{}| and the \verb|\item|Eg. +% \begin{verbatim} +% \begin{trivlist} +% \item[] +% \section{foo} +% text +% \end{trivlist} +% \end{verbatim} +% +\def\boxed@sectiontitle#1{% + % this macro may be called in a tabular. Special code must be written + % to accomodate this. In LaTeX, a tabular is made out of hboxes. + % TeX never goes into horizontal mode because of this; it only + % gets into vertical mode and restricted horizontal mode. Certain + % indenting problems must be handled because of this. They + % are delt with at the end of this routine. + % It is also necessary to close the hbox that was created before + % the \section and create a new one when this macro has ended. + % This macro therefore simulates a \kill, so that any text before + % the \section not be printed. The proper use is therefore + % ... + % text\\ + % \section{foo} + % more text\\ + % ... + \ifx\\\@tabcr % is this in a tabular? (this *should* work but is a cludge) + \@stopfield % the is the first part of a \kill + \else + \@@par % This will end the previous paragraph if needed and + % go into vertical mode. If this was already in + % vertical mode then the \par does nothing. + + \fi + \begingroup + \everypar={}% + \def\par{\@@par}% + \let\\=\@normalcr + \addpenalty{\@secpenalty} % this would be a good place for a page break + % \@secpenalty is what LaTeX uses before its + % section's. It happens to be -300 + \addvspace{\sectionskip} % put in a bit of glue + % The following hbox will be contributed to the page list without going + % into horizontal mode. Therefore, any \parindent's, \parshape's, \leftskip + % will be ignored but \hoffset's are not. The result is that the box will + % only by \hoffset. This is what I want + \hbox to 0pt{% + \hss % this is an llap. In other words, this glue + % will shrink by the width of the stuff in the vbox + % (\sectionwidth) into the left margin and then + % insert the contents of the vbox. + \vtop to 0pt{% make a 0pt height paragraph, with the baseline at the + % lined up with the baseline of the first box in the list + \leftskip=0pt + \hsize=\sectionwidth + \textwidth=\sectionwidth + \raggedright % you don't want this filled out to the right margin + \sectionfont + #1\vss % Go into horizontal mode; do the paragraph; + % go into vertical mode; add some negative glue + % to give a box of 0pt height and depth + }% + }% + \addpenalty{-\@secpenalty} % this would be a bad place for a page break + \vskip-\baselineskip % when the next box is processed, baselineskip glue + % glue will be added (the box has no depth because of + % the \vss; therefore, we don't have to worry about + % \lineskiplimit). This -\baselineskip glue + % is to undo this. \nointerlineskip doesn't + % work because the baseline of this line would be lined + % up with the top of the top of the next box. We + % want the baselines lined up. + % + % It may have been possible to do this by forcing the + % baseline of this box to be the top of the box but + % then the interline skip between this box and the + % previous box would be off as the baselines of the + % this box (the one that being made above) and the + % previous line would be separated by \baselineskip + % (probably, it may be separted by the depth of the + % previous box + \lineskip) but as the baseline of + % this box has been moved to the top, the box's would + % separted by to much glue. The exact amount being + % the height of this box. + \endgroup + \ifx\\\@tabcr % is this in a tabular? (this *should* work but is a cludge) + % this is the second part of the \kill; it starts the next tabbing line + % Because this routine will never get into paragraph mode when used in + % tabbing the \parskip that is discussed below will never be inserted. + % Therefore it should not be negated as done below. + \@startline + \ignorespaces + \else + \vskip-\parskip % The next thing to be contributed will be a paragraph. + % Right before being contributed though a \vskip\parskip + % will be inserted. This is to negate it. + % + % I do consider this to be a bit of a cludge but + % I can not find a way to write \unskipfutureskip + % or a way to make TeX think that nothing has + % been contributed to the page list. + \fi +} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% This is for sectiontitles that are entirely above the section text +% +\def\unboxed@sectiontitle#1{% + \ifx\\\@tabcr % see boxed@sectiontitle for explation + \@stopfield + \else + \@@par + \fi + \begingroup + \everypar={}% + \def\par{\@@par}% + \def\\{ } + \addpenalty{\@secpenalty} + \addvspace{\sectionskip} + \hbox to 0pt{\hss\hbox to \sectionwidth{\sectionfont#1\hss}} + \addpenalty{-\@secpenalty} % this would be a bad place for a page break + \endgroup + \ifx\\\@tabcr % see boxed@sectiontitle for explation + \@startline + \else + \vskip-\parskip + \fi + \ignorespaces +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% There are two types of section headings: +% 1) the section heading is all on one line and directly +% below it, is the body of the text +% 2) the section heading is entirely in the left margin +% (possibly taking multiple lines) with the body of +% the text next to it +% +\let\@@section\relax +\def\ds@overlapped{\ifx\@@section\relax\newsectionwidth{0.5in}\let + \@@section\unboxed@sectiontitle\fi} +\def\ds@margin{\ifx\@@section\relax\newsectionwidth{1.3in}\let + \@@section\boxed@sectiontitle\fi} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% DEFAULTS: (some of them) +% +% centered name +% overlapped section titles +% +% format is: +% title employer +% location dates +% body +% with everything in the left of its column + +%\input article.sty + +\if@line\ds@line\else\ds@centered\fi +\if@margin\ds@margin\else\ds@overlapped\fi + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% typeset resume all nice and pretty +% +\def\Resume{{R\'{e}sum\'{e}}} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% makes a line of width \textwidth starting at -\hoffset +% +\def\fullline{ % hrules only listen to \hoffset + \nointerlineskip % so I have this code + \moveleft\hoffset\vbox{\hrule width\textwidth} + \nointerlineskip +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% create a multiline box. +% +\def\@tablebox#1{\begin{tabular}[t]{@{}l@{\extracolsep{\fill}}}#1\end{tabular}} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% use this to define your name +% +\def\name#1{\def\@name{#1}} + +\def\@name{} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% use this to define your address, this may be called more than once. +% +\let\@addressone\relax +\let\@addresstwo\relax + +\def\address#1{ + \@ifundefined{@addressone}{\def\@addressone{#1}}{\def\@addresstwo{#1}}} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% if you want to print your name and address is a slightly +% different format than sugessted, then this can be used +% to place it exactly where you want +% +\def\opening{\def\@opening{} + \begingroup + \leftskip=-\hoffset % I use leftskip to move things to the left as + \advance\textwidth\hoffset % changing hoffset doesn't work. But this + \hsize=\textwidth % doesn't really work as hboxes are rules + % are unaffeted + \let\par=\@@par + \parindent=0pt + \parskip=0pt + \print@name + \endgroup +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% all of the resume goes in the resume environment +% +\newenvironment{resume}{\begingroup + \@ifundefined{@opening}{\opening}{} +}{\endgroup} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% gives you a tabular environment with n equally spaced columns +% \begin{ncolumn}{#} ... \end{ncolumn} +% +% The p option of LaTeX is broken in all but the newest verion +% of latex.tex, this is how to fix it +% +\def\@endpbox{\par\egroup\hfil} +\let\@@endpbox=\@endpbox + +\newdimen\@columnwidth % the width of each column equal to +\def\ncolumn#1{% + % \@columnwidth = \textwidth / #1 + \@columnwidth=\textwidth \divide\@columnwidth by #1 + \begin{tabular*}{\textwidth}[t]% + {*{#1}{@{}p{\@columnwidth}@{\extracolsep{\fill}}}} +} + +\def\endncolumn{\end{tabular*}} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% \employer{text} defines employer to be text +% \location{text} defines location to be text +% \dates{text} defines dates to be text +% \title{text} defines title to be text +% \body +% + +\def\employer#1{\def\@employer{\print@employer{#1}}} +\def\location#1{\def\@location{\print@location{#1}}} +\def\dates#1{\def\@dates{\print@dates{#1}}} +\def\title#1{\def\@title{\print@title{#1}}} + +\let\l@justify\raggedright +\let\r@justify\raggedleft +\let\c@justify\centering + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% \@format{name}{justify} +% will define \print@#1 to print it's one argument +% justified according to #2 which can be +% l = left +% r = right +% c = center +% +% eg. +% \@format{employer}{c} +% is the same as \def\print@employer#1{{\centering #1\par}} +% +\def\@format#1#2{% + \expandafter\gdef\csname print@#1\endcsname##1{% + {\csname#2@justify\endcsname##1\par}} +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% this is used to define how the position environment should +% formated. +% +% \begin{format} positioning text \end{format} +% where positioning text may be +% \employer{pos} +% \location{pos} +% \dates{pos} +% \title{pos} +% \body (for the body of the position environment) +% where pos is +% l for left +% r for right +% c for center +% use \\ to break the line +% you don't have to use all of the options. +% on any one line, you should indicate what you want on that line +% and where it should go within its column. +% eg. +% the following prints the employer in the left with the location +% centered within that its column. It then prints the date on the +% right. Then it prints the body of the position environment. Then +% it prints the title centered within its column; as there is only +% one column here it is really just centered. +% +% \begin{format} +% \employer{l}\location{c}\\ +% \dates{r}\\ +% \body\\ +% \title{c}\\ +% \end{format} + +\newcounter{numberofcolumns} +\newenvironment{format}{% + \def\end@line@head{\append@tabular@head{tabular@text}\tabular@text={}% + \c@numberofcolumns 0} + \def\end@line@tail{\append@tabular@tail{tabular@text}\tabular@text={}% + \c@numberofcolumns 0} + \tabular@text={} + \tabular@head={} + \tabular@tail={} + \c@numberofcolumns 0 + \let\\=\end@line@head + \def\employer##1{\advance\c@numberofcolumns 1 + \@format{employer}{##1} + \append@tabular@text{employer}} + \def\location##1{\advance\c@numberofcolumns 1 + \@format{location}{##1} + \append@tabular@text{location}} + \def\dates##1{\advance\c@numberofcolumns 1 + \@format{dates}{##1} + \append@tabular@text{dates}} + \def\title##1{\advance\c@numberofcolumns 1 + \@format{title}{##1} + \append@tabular@text{title}} + \def\body{\iftoks\tabular@head\undefined@token\then + \else + \@append{\noexpand\\}\to\tabular@head + \skotfi + \let\\=\end@line@tail}}{} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%taken from page 378 of TeXbook but freely hacked +% +% appends the expansion of #1 to the token list #2 + +\def\@append#1\to#2{% + \@ta=\expandafter{#1}% + \xdef\@append@temp{\the#2\the\@ta} + \global#2=\expandafter{\@append@temp}% +} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% CHAA006%vaxb.rhbnc.ac.uk@NSS.Cs.Ucl.AC.UK +% texhax.88.078 +% is used to see if two token lists are equal +% there must be a better way +% + +\let \then = \empty +\def \iftoks #1#2\then #3\else #4\skotfi{ + \edef \1{\the #1} + \edef \2{\the #2} + \ifx \1\2\then #3\else #4\fi} + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% \append@tabular@text{command} +% +% appends command to the end of \tabular@text. +% NOTE: command MUST be a command but without the \ +% Eg. \append@tabular@text{relax} +% +% used to define \tabular@text for the tabular environment +% used by append@tabular@head and append@tabular@tail +% + +\def\append@tabular@text#1{% +\iftoks\tabular@text\undefined@token\then + \global\tabular@text=\expandafter{\csname @#1\endcsname} +\else + \@append{&}\to\tabular@text + \@append{\csname @#1\endcsname}\to\tabular@text +\skotfi +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% append@tabular@head +% +% appends command to the end of \tabular@text@head +% NOTE: command MUST be a command but without the \ +% Eg. \append@tabular@head{relax} +% +% used to define \tabular@head for the tabular environment +% used by the position environment +% +\def\append@tabular@head#1{% + \ifnum\the\c@numberofcolumns=0\relax + \else + \iftoks\tabular@head\undefined@token\then + \relax + \else + \@append{\noexpand\\}\to\tabular@head + \@append{\noexpand\penalty-\@secpenalty}\to\tabular@head + \skotfi + \@append{\noexpand\begin{ncolumn}}\to\tabular@head + \@append{\expandafter{\the\c@numberofcolumns}}\to\tabular@head + \@append{\the\csname#1\endcsname}\to\tabular@head + \@append{\noexpand\end{ncolumn}}\to\tabular@head + \fi +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% append@tabular@tail +% +% appends command to the end of \tabular@text@htail +% NOTE: command MUST be a command but without the \ +% Eg. \append@tabular@tail{relax} +% +% used to define \tabular@tail for the tabular environment +% used by the position environment +% +\def\append@tabular@tail#1{% + \ifnum\the\c@numberofcolumns=0\relax + \else + \iftoks\tabular@tail\undefined@token\then + \else + \@append{\noexpand\\}\to\tabular@tail + \@append{\noexpand\penalty-\@secpenalty}\to\tabular@tail + \skotfi + \@append{\noexpand\begin{ncolumn}}\to\tabular@tail + \@append{\expandafter{\the\c@numberofcolumns}}\to\tabular@tail + \@append{\the\csname#1\endcsname}\to\tabular@tail + \@append{\noexpand\end{ncolumn}}\to\tabular@tail + \fi +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% put the actual job descriptions here +% \begin{postion} ... \end{position} +% in the ... describe the position. +% don't put the \dates \location etc in here. define them before hand +\newenvironment{position}% + {% + \begingroup + \par + \the\tabular@head +% \addpenalty{-\@secpenalty}% bad place for a page break + \penalty -\@secpenalty % bad place for a page break + \penalty 10000 + \ignorespaces + }{% + \the\tabular@tail +% \addpenalty{\@secpenalty}% good place for a page break + \penalty \@secpenalty % good place for a page break + \endgroup +} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% DEFAULTS: (the rest of them) +% +% centered name +% overlapped section titles +% +% format is: +% title employer +% location dates +% body +% with everything in the left of its column + +\@secpenalty = -500 +\topmargin 0pt +\headheight 0pt +\headsep 0pt +\textheight 9in +\parindent 0pt +\topmargin 0in +\oddsidemargin 0pt +\evensidemargin 0pt +\marginparwidth 0pt +\parindent 0pt +\parskip \baselineskip +\setcounter{secnumdepth}{0} +\def\@listI{\leftmargin\leftmargini +\topsep 0pt +\parskip 0pt +\partopsep 2pt plus 2pt +\parsep 2pt plus 2pt +\itemsep \parsep} + +\pagestyle{empty} % don't want page numbers + +\begin{format} +\title{l}\employer{r}\\ +\location{l}\dates{r}\\ +\body\\ +\end{format} + +\let\section\@@section + |