summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Master/texmf-dist/doc/luatex/hyph-utf8/README59
-rw-r--r--Master/texmf-dist/doc/luatex/hyph-utf8/luatex-hyphen.pdfbin0 -> 393081 bytes
-rw-r--r--Master/texmf-dist/source/luatex/hyph-utf8/Makefile35
-rw-r--r--Master/texmf-dist/source/luatex/hyph-utf8/luatex-hyphen.dtx836
-rw-r--r--Master/texmf-dist/tex/luatex/hyph-utf8/etex.src928
-rw-r--r--Master/texmf-dist/tex/luatex/hyph-utf8/hyphen.cfg426
-rw-r--r--Master/texmf-dist/tex/luatex/hyph-utf8/luatex-hyphen.lua77
7 files changed, 2361 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/luatex/hyph-utf8/README b/Master/texmf-dist/doc/luatex/hyph-utf8/README
new file mode 100644
index 00000000000..0ef0959f81c
--- /dev/null
+++ b/Master/texmf-dist/doc/luatex/hyph-utf8/README
@@ -0,0 +1,59 @@
+ The luatex hyphenation package.
+
+This package aims at replacing the standard hyphen.cfg for LuaTeX. The main
+difference is that the patterns are loaded at runtime and not in the format.
+This leads to much shorter format loading time, with no loss as the
+patterns are not really loaded in the format, just copied and then loaded
+at runtime.
+
+This package is developped on <http://github.com/eroux/luatex-hyphen>.
+
+Installation
+------------
+
+Here are the recommended installation methods (preferred first).
+
+1. If you are using TeX Live 2010 or later, the files are already installed.
+
+2. a. Grab luatex-hyphen.tds.zip on the CTAN.
+ b. Unzip it at the root of one or your TDS trees.
+ c. Update some filename database after, and regenerate the formats for
+ LuaTeX. See your TeX distribution's manual for details.
+
+3. a. Grab the sources from CTAN or github.
+ b. Run 'make install TEXMFROOT=/path/to/texmf'.
+ c. See 2c.
+
+4. Try to figure it out by looking at the Makefile and comments in the sources.
+
+Manifest
+--------
+
+Source files:
+ luatex-hyphen.dtx single file source & doc
+
+Derived files:
+ luatex-hyphen.pdf documentation
+ hyphen.cfg pattern loading file
+ luatex-hyphen.lua lua code used by the package
+
+
+License
+-------
+
+This work is under the CC0 license, with an additional restriction:
+the article 6 of the LaTeX Project Public License (lppl), that applies to code
+that has been taken from LaTeX files.
+
+You can find the text of the lppl at
+
+The lppl can be found at http://www.latex-project.org/lppl.txt
+
+You can find the CC0 full text at
+
+http://creativecommons.org/publicdomain/zero/1.0/legalcode
+
+The file luatex-hyphen.dtx contains code with the lppl restriction as well as the
+derived files
+ hyphen.cfg
+ luatex-hyphen.pdf
diff --git a/Master/texmf-dist/doc/luatex/hyph-utf8/luatex-hyphen.pdf b/Master/texmf-dist/doc/luatex/hyph-utf8/luatex-hyphen.pdf
new file mode 100644
index 00000000000..474174fbb6b
--- /dev/null
+++ b/Master/texmf-dist/doc/luatex/hyph-utf8/luatex-hyphen.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/luatex/hyph-utf8/Makefile b/Master/texmf-dist/source/luatex/hyph-utf8/Makefile
new file mode 100644
index 00000000000..2ae8bd67a1f
--- /dev/null
+++ b/Master/texmf-dist/source/luatex/hyph-utf8/Makefile
@@ -0,0 +1,35 @@
+# Makefile for luatex-hyphen in tex-hyphen/hyph-utf8
+
+NAME = luatex-hyphen
+DTX = $(NAME).dtx
+
+# Generated files
+COMPILED = $(NAME).pdf
+UNPACKED = $(NAME).lua hyphen.cfg
+
+# Installation locations
+RUNDIR = ../../../tex/luatex/hyph-utf8
+DOCDIR = ../../../doc/luatex/hyph-utf8
+
+# Final files
+RUNFILES = $(patsubst %, $(RUNDIR)/%, $(UNPACKED))
+DOCFILE = $(DOCDIR)/$(COMPILED)
+
+all: $(RUNFILES) $(DOCFILE)
+
+DO_TEX = tex --interaction=batchmode $< >/dev/null
+DO_PDFLATEX = pdflatex --interaction=batchmode $< >/dev/null
+
+$(DOCFILE): $(DTX)
+ $(DO_PDFLATEX)
+ $(DO_PDFLATEX)
+ mv $(COMPILED) $(DOCDIR)
+
+$(RUNFILES): $(DTX)
+ $(DO_TEX)
+ for file in $(UNPACKED); do mv $$file $(RUNDIR); done
+
+clean:
+ @$(RM) -- *.log *.aux *.toc *.idx *.ind *.ilg
+
+.PHONY: clean
diff --git a/Master/texmf-dist/source/luatex/hyph-utf8/luatex-hyphen.dtx b/Master/texmf-dist/source/luatex/hyph-utf8/luatex-hyphen.dtx
new file mode 100644
index 00000000000..2eac29d4e5c
--- /dev/null
+++ b/Master/texmf-dist/source/luatex/hyph-utf8/luatex-hyphen.dtx
@@ -0,0 +1,836 @@
+% \iffalse meta-comment
+%
+% This is a modified version of the hyphen.cfg file from the babel system,
+% intended for use with LuaTeX, but compatible with other engines.
+% The present file IS NOT part of the babel system.
+%
+% The modifications are Copyright 2010 Khaled Hosny, Elie Roux, and Manuel
+% Pegourie-Gonnard, under LPPL version 1.3 or later.
+%
+% Here is the licence statement of the original hyphen.cfg file:
+% |
+% | Copyright 1989-2008 Johannes L. Braams and any individual authors
+% | Listed elsewhere in this file. All rights reserved.
+% |
+% | It may be distributed and/or modified under the
+% | Conditions of the LaTeX Project Public License, either version 1.3
+% | Of this license or (at your option) any later version.
+% | The latest version of this license is in
+% | http://www.latex-project.org/lppl.txt
+% | And version 1.3 or later is part of all distributions of LaTeX
+% | Version 2003/12/01 or later.
+% |
+% | This work has the LPPL maintenance status "maintained".
+% |
+% | The Current Maintainer of this work is Johannes Braams.
+% |
+% `---=(licence statement of original hyphen.cfg)=---
+%
+%<*ignore>
+\begingroup
+ \def\x{LaTeX2e}%
+\expandafter\endgroup
+\ifcase 0\ifx\install y1\fi\expandafter
+ \ifx\csname processbatchFile\endcsname\relax\else1\fi
+ \ifx\fmtname\x\else 1\fi\relax
+\else\csname fi\endcsname
+%</ignore>
+%<*install>
+\input docstrip.tex
+
+\keepsilent
+\askforoverwritefalse
+
+\preamble
+
+This is a modified version of the hyphen.cfg file from the babel system,
+intended for use with LuaTeX, but compatible with other engines.
+The present file IS NOT part of the babel system.
+
+The modifications are Copyright 2010 Khaled Hosny, Elie Roux, and Manuel
+Pegourie-Gonnard, under LPPL version 1.3 or later.
+
+Here is the licence statement of the original hyphen.cfg file:
+ |
+ | Copyright 1989-2008 Johannes L. Braams and any individual authors
+ | Listed elsewhere in this file. All rights reserved.
+ |
+ | It may be distributed and/or modified under the
+ | Conditions of the LaTeX Project Public License, either version 1.3
+ | Of this license or (at your option) any later version.
+ | The latest version of this license is in
+ | http://www.latex-project.org/lppl.txt
+ | And version 1.3 or later is part of all distributions of LaTeX
+ | Version 2003/12/01 or later.
+ |
+ | This work has the LPPL maintenance status "maintained".
+ |
+ | The Current Maintainer of this work is Johannes Braams.
+ |
+ `---=(licence statement of original hyphen.cfg)=---
+
+\endpreamble
+
+\generate{%
+ \file{hyphen.cfg}{\from{luatex-hyphen.dtx}{hyphen}}%
+}
+
+\def\MetaPrefix{-- }
+
+\def\luapostamble{%
+ \MetaPrefix^^J%
+ \MetaPrefix\space End of File `\outFileName'.%
+}
+
+\def\currentpostamble{\luapostamble}%
+
+\preamble
+
+This is a generated file (source: luatex-hyphen.dtx).
+
+Copyright (C) 2010 by The LuaLaTeX development team.
+
+This work is under the CC0 license.
+
+\endpreamble
+
+\generate{%
+ \file{luatex-hyphen.lua}{\from{luatex-hyphen.dtx}{lua}}%
+}
+
+\endbatchfile
+%</install>
+%<*ignore>
+\fi
+%</ignore>
+%<*driver>
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesFile{luatex-hyphen.drv}
+ [2010/04/28 v1.3beta Hyphenation file for LuaTeX]
+\documentclass{ltxdoc}
+\usepackage[ascii]{inputenc}
+\usepackage[T1]{fontenc}
+\usepackage{lmodern}
+\EnableCrossrefs
+\CodelineIndex
+\begin{document}
+ \DocInput{luatex-hyphen.dtx}%
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{0}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+% \GetFileInfo{luatex-hyphen.drv}
+%
+% \title{The \texttt{hyphen.cfg} file for Lua\TeX }
+% \date{2010/04/28 v1.3beta}
+% \author{Khaled Hosny, \'Elie Roux, and Manuel P\'egouri\'e-Gonnard\\
+% \texttt{khaledhosny@eglug.org} \\
+% \texttt{elie.roux@telecom-bretagne.eu} \\
+% \texttt{mpg@elzevir.fr}}
+%
+% \maketitle
+%
+% \begin{abstract}
+% This is a modified version of the file \texttt{hyphen.cfg} distributed with
+% the \textsf{babel} package, with a supporting Lua module, aimed at adapting
+% \textsf{babel}'s hyphenation patterns loading mechanism to Lua\TeX's dynamic
+% pattern loading capabilities. It makes use of a \texttt{language.dat.lua}
+% file (whose format is described below) that should be present in the
+% distribution, in addition to the regular \texttt{language.dat} file.
+%
+% There is a version of \texttt{etex.src} modified for the same reasons using
+% similar code, which also makes use of the \texttt{luatex-hyphen.lua} and
+% \texttt{language.dat.lua} files described here.
+% \end{abstract}
+%
+% \section{Documentation}
+%
+% Hyphenation patterns should be loaded at runtime with Lua\TeX: if they appear
+% in the format, they will be rehashed when the format is loaded anyway, which
+% makes the format quite long to load (many seconds even on modern machines)
+% and provides for bad user experience. Hence, it is desirable to load as few
+% patterns as possible in the format, and load on-demand the needed patterns
+% at runtime.
+%
+% This package provides a modified version of hyphen.cfg adapted to Lua\TeX,
+% as well as a supporting Lua module. Since a lot of things, especially the
+% catcodes, are not as predictable at runtime than at format creation time, we
+% don't \verb+\input+ the usual pattern files, but rather load the patterns
+% using the Lua interface, using a special plain text version of the pattern
+% files if available.
+%
+% The existence and file name of such a version cannot be guessed, so we need
+% a specific database: the file \texttt{language.dat.lua}. This file should be
+% loadable by Lua and return a table whose keys are the canonical language
+% names as found in \texttt{language.dat}, and the values are Lua tables
+% consisting of:
+% \begin{enumerate}
+% \item A fixed part with two fields:
+% \begin{quote}
+% \verb+loader = <string> name of the TeX loader+\\
+% \verb+synonyms = { <string> alternative name, ...}+
+% \end{quote}
+% Those field's values must be the same as in \texttt{language.dat}. The
+% \verb+loader+ field is currently unused.
+% \item A variable part consisting of either:
+% \begin{itemize}
+% \item For most languages:
+% \begin{quote}
+% \verb+patterns = <string> filename for patterns+\\
+% \verb+hyphenation = <string> filename for exceptions+\\
+% \verb+lefthyphenmin = <number> value for \letfhyphenmin+\\
+% \verb+righthyphenmin = <number> value for \letfhyphenmin+
+% \end{quote}
+% The files given by \verb+patterns+ (resp. \verb+hypenation+) must be
+% plain text files encoded in utf8, with only patterns (resp.
+% exceptions) and not even comments: their content will be used
+% directly without being parsed by \TeX. If one of these keys is
+% missing or is the empty string, it is ignored and no patterns (resp.
+% exceptions) are loaded for this language. The values of
+% \texttt{*hyphenmin} are currently unused.
+% \item Special case are supported by a field \verb+special+. Currently,
+% the following kind of values are recognized:
+% \begin{description}
+% \item[\texttt{'null'}] for languages with no hyphenation patterns
+% nor exceptions. (Note that this is equivalent to both
+% \verb+hyphenation+ and \verb+patterns+ being \verb+nil+ or
+% \verb+''+, but produces a more explicit message in the log.)
+% \item[\texttt{'disabled:<reason>'}] allows to disable specific
+% languages: when the user tries to load this language, an error
+% will be issued, with the \verb+<reason>+.
+% \item[\texttt{'language0'}] only \texttt{english} should use this
+% type of special, to indicate it is normally dumped in the format
+% as \verb+\language0+ (see below).
+% \end{description}
+% Special languages may have \texttt{*hyphenmin} information when it
+% makes sense (mostly \verb+\language0+).
+% \end{itemize}
+% \end{enumerate}
+% Languages that are mentioned in \texttt{language.dat} but not in
+% \texttt{language.dat.lua} will be loaded in the format. So, if the
+% \texttt{language.dat.lua} file is missing or incomplete, languages will just
+% go back to the ``old'' behaviour, resulting in longer startup time, which
+% seems less bad than complete breakage.
+%
+% For backward compatibility, Knuth's original patterns for US English are
+% always loaded in the format, as \verb+\language0+.\footnote{It is assumed
+% to be the first entry in \texttt{language.dat}.}
+%
+% The modified version of \texttt{hyphen.cfg} provided here checks for the
+% engine, and should continue to work with any engine without any modified
+% behaviour. However, it is recommended to install it in such a way that the
+% original \verb+hyphen.cfg+ from \textsf{babel} is found first by any engine
+% other than Lua\TeX.
+%
+% \StopEventually{
+% }
+%
+% \section{Implementation}
+%
+% \subsection{luatex-hyphen.lua}
+%
+% \begin{macrocode}
+%<*lua>
+% \end{macrocode}
+%
+% Start a Lua module, importing only the necessary functions as locals.
+%
+% \begin{macrocode}
+local error, dofile, pairs, ipairs = error, dofile, pairs, ipairs
+local io, texio, lang, kpse = io, texio, lang, kpse
+module('luatexhyphen')
+% \end{macrocode}
+%
+% Two functions for error and information reporting.
+%
+% \begin{macrocode}
+local function wlog(msg, ...)
+ texio.write_nl('log', 'luatex-hyphen: '..msg:format(...))
+end
+local function err(msg, ...)
+ error('luatex-hyphen: '..msg:format(...), 2)
+end
+% \end{macrocode}
+%
+% Load the \texttt{language.dat.lua} file with the Lua version of the
+% language database.
+%
+% \begin{macrocode}
+local dbname = "language.dat.lua"
+local language_dat
+local dbfile = kpse.find_file(dbname)
+if not dbfile then
+ err("file not found: "..dbname)
+else
+ language_dat = dofile(dbfile)
+end
+% \end{macrocode}
+%
+% Look up a language in the database, and return the associated
+% information, as well as the canonical name of the language.
+%
+% \begin{macrocode}
+function lookupname(name)
+ if language_dat[name] then
+ return language_dat[name], name
+ else
+ for canon, data in pairs(language_dat) do
+ for _,syn in ipairs(data.synonyms) do
+ if syn == name then
+ return data, canon
+ end
+ end
+ end
+ end
+end
+% \end{macrocode}
+%
+% Set hyphenation patterns and exceptions for a language given by its name
+% (in the database) and number (value of \verb+\language+). Doesn't return
+% anything, but will call \verb+error()+ if things go wrong.
+%
+% \begin{macrocode}
+function loadlanguage(lname, id)
+ local msg = "loading%s patterns and exceptions for: %s (\\language%d)"
+% \end{macrocode}
+%
+% Lookup the language in the database.
+%
+% \begin{macrocode}
+ local ldata, cname = lookupname(lname)
+ if not ldata then
+ err("no entry in %s for this language: %s", dbname, lname)
+ end
+% \end{macrocode}
+%
+% Handle special languages.
+%
+% \begin{macrocode}
+ if ldata.special then
+ if ldata.special == 'null' then
+ wlog(msg, ' (null)', cname, id)
+ return
+ elseif ldata.special:find('^disabled:') then
+ err("language disabled by %s: %s (%s)", dbname, cname,
+ ldata.special:gsub('^disabled:', ''))
+ elseif ldata.special == 'language0' then
+ err("\\language0 should be dumped in the format")
+ else
+ err("bad entry in %s for language %s")
+ end
+ end
+% \end{macrocode}
+%
+% The generic case: load hyphenation patterns and exceptions from files
+% given by the language code.
+%
+% \begin{macrocode}
+ wlog(msg, '', cname, id)
+ for _, item in ipairs{'hyphenation', 'patterns'} do
+ local file = ldata[item]
+ if file ~= nil and file ~= '' then
+ local file = kpse.find_file(file) or err("file not found: %s", file)
+ local fh = io.open(file, 'r')
+ local data = fh:read('*a') or err("file not readable: %s", f)
+ fh:close()
+ lang[item](lang.new(id), data)
+ end
+ end
+end
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</lua>
+% \end{macrocode}
+%
+% \subsection{hyphen.cfg}
+%
+% \begin{macrocode}
+%<*hyphen>
+% \end{macrocode}
+%
+% Start with unmodified code from \textsf{babel}.
+%
+% \begin{macrocode}
+\ifx\ProvidesFile\@undefined
+ \def\ProvidesFile#1[#2 #3 #4]{%
+ \wlog{File: #1 #4 #3 <#2>}%
+% \end{macrocode}
+%
+% Use a modified banner for Lua\TeX.
+%
+% \begin{macrocode}
+ \ifx\directlua\@undefined
+ \toks8{Babel <#3> and hyphenation patterns for }%
+ \else
+ \toks8{LuaTeX adaptation of babel <#3>
+ and hyphenation patterns for }%
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \let\ProvidesFile\@undefined
+ }
+ \def\ProvidesLanguage#1[#2 #3 #4]{%
+ \wlog{Language: #1 #4 #3 <#2>}%
+ }
+\else
+ \let\bbl@tempa\ProvidesFile
+ \def\ProvidesFile#1[#2 #3 #4]{%
+% \end{macrocode}
+%
+% Same here.
+%
+% \begin{macrocode}
+ \ifx\directlua\@undefined
+ \toks8{Babel <#3> and hyphenation patterns for }%
+ \else
+ \toks8{LuaTeX adaptation of babel <#3>
+ and hyphenation patterns for }%
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \bbl@tempa#1[#2 #3 #4]%
+ \let\ProvidesFile\bbl@tempa}
+ \def\ProvidesLanguage#1{%
+ \begingroup
+ \catcode`\ 10 %
+ \@makeother\/%
+ \@ifnextchar[%]
+ {\@provideslanguage{#1}}{\@provideslanguage{#1}[]}}
+ \def\@provideslanguage#1[#2]{%
+ \wlog{Language: #1 #2}%
+ \expandafter\xdef\csname ver@#1.ldf\endcsname{#2}%
+ \endgroup}
+\fi
+
+% \end{macrocode}
+%
+% File identification is modified again.
+%
+% \begin{macrocode}
+\ProvidesFile{hyphen.cfg}
+ [2010/04/26 v3.8l-luatex-1.3beta %
+ Language switching mechanism for LuaTeX, adapted from babel v3.8l]
+% \end{macrocode}
+%
+% \begin{macrocode}
+\ifx\AtBeginDocument\@undefined
+ \input plain.def\relax
+\fi
+\ifx\language\@undefined
+ \csname newcount\endcsname\language
+\fi
+\ifx\newlanguage\@undefined
+ \csname newcount\endcsname\last@language
+\else
+ \countdef\last@language=19
+\fi
+\ifx\newlanguage\@undefined
+ \def\addlanguage#1{%
+ \global\advance\last@language \@ne
+ \ifnum\last@language<\@cclvi
+ \else
+ \errmessage{No room for a new \string\language!}%
+ \fi
+ \global\chardef#1\last@language
+ \wlog{\string#1 = \string\language\the\last@language}}
+\else
+ \def\addlanguage{\alloc@9\language\chardef\@cclvi}
+\fi
+\def\adddialect#1#2{%
+ \global\chardef#1#2\relax
+ \wlog{\string#1 = a dialect from \string\language#2}}
+\def\iflanguage#1{%
+ \expandafter\ifx\csname l@#1\endcsname\relax
+ \@nolanerr{#1}%
+ \else
+ \bbl@afterfi{\ifnum\csname l@#1\endcsname=\language
+ \expandafter\@firstoftwo
+ \else
+ \expandafter\@secondoftwo
+ \fi}%
+ \fi}
+\edef\selectlanguage{%
+ \noexpand\protect
+ \expandafter\noexpand\csname selectlanguage \endcsname
+ }
+\ifx\@undefined\protect\let\protect\relax\fi
+\ifx\documentclass\@undefined
+ \def\xstring{\string\string\string}
+\else
+ \let\xstring\string
+\fi
+\xdef\bbl@language@stack{}
+\def\bbl@push@language{%
+ \xdef\bbl@language@stack{\languagename+\bbl@language@stack}%
+ }
+\def\bbl@pop@lang#1+#2-#3{%
+ \def\languagename{#1}\xdef#3{#2}%
+ }
+\def\bbl@pop@language{%
+ \expandafter\bbl@pop@lang\bbl@language@stack-\bbl@language@stack
+ \expandafter\bbl@set@language\expandafter{\languagename}%
+ }
+\expandafter\def\csname selectlanguage \endcsname#1{%
+ \bbl@push@language
+ \aftergroup\bbl@pop@language
+ \bbl@set@language{#1}}
+\def\bbl@set@language#1{%
+ \edef\languagename{%
+ \ifnum\escapechar=\expandafter`\string#1\@empty
+ \else \string#1\@empty\fi}%
+ \select@language{\languagename}%
+ \if@filesw
+ \protected@write\@auxout{}{\string\select@language{\languagename}}%
+ \addtocontents{toc}{\xstring\select@language{\languagename}}%
+ \addtocontents{lof}{\xstring\select@language{\languagename}}%
+ \addtocontents{lot}{\xstring\select@language{\languagename}}%
+ \fi}
+\def\select@language#1{%
+ \expandafter\ifx\csname l@#1\endcsname\relax
+ \@nolanerr{#1}%
+ \else
+ \expandafter\ifx\csname date#1\endcsname\relax
+ \@noopterr{#1}%
+ \else
+ \bbl@patterns{\languagename}%
+ \originalTeX
+ \expandafter\def\expandafter\originalTeX
+ \expandafter{\csname noextras#1\endcsname
+ \let\originalTeX\@empty}%
+ \languageshorthands{none}%
+ \babel@beginsave
+ \csname captions#1\endcsname
+ \csname date#1\endcsname
+ \csname extras#1\endcsname\relax
+ \babel@savevariable\lefthyphenmin
+ \babel@savevariable\righthyphenmin
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname\relax
+ \fi
+ \fi
+ \fi}
+\long\def\otherlanguage#1{%
+ \csname selectlanguage \endcsname{#1}%
+ \ignorespaces
+ }
+\long\def\endotherlanguage{%
+ \originalTeX
+ \global\@ignoretrue\ignorespaces
+ }
+\expandafter\def\csname otherlanguage*\endcsname#1{%
+ \foreign@language{#1}%
+ }
+\expandafter\def\csname endotherlanguage*\endcsname{%
+ \csname noextras\languagename\endcsname
+ }
+\def\foreignlanguage{\protect\csname foreignlanguage \endcsname}
+\expandafter\def\csname foreignlanguage \endcsname#1#2{%
+ \begingroup
+ \originalTeX
+ \foreign@language{#1}%
+ #2%
+ \csname noextras#1\endcsname
+ \endgroup
+ }
+\def\foreign@language#1{%
+ \def\languagename{#1}%
+ \expandafter\ifx\csname l@#1\endcsname\relax
+ \@nolanerr{#1}%
+ \else
+ \bbl@patterns{\languagename}%
+ \languageshorthands{none}%
+ \csname extras#1\endcsname
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname\relax
+ \fi
+ \fi
+ }
+\def\bbl@patterns#1{%
+ \language=\expandafter\ifx\csname l@#1:\f@encoding\endcsname\relax
+ \csname l@#1\endcsname
+ \else
+ \csname l@#1:\f@encoding\endcsname
+ \fi\relax
+% \end{macrocode}
+%
+% With Lua\TeX, load patterns and exceptions on the fly using functions
+% from the supporting Lua module, unless of course they are already loaded
+% for this language (identified by its number to avoid problems with
+% synonyms).
+%
+% Also, since this code will be executed at runtime, be careful while
+% testing if we're using Lua\TeX.
+%
+% \begin{macrocode}
+ \ifx\directlua\@undefined\else
+ \ifx\directlua\relax\else
+ \ifcsname lu@texhyphen@loaded@\the\language\endcsname \else
+ \global\@namedef{lu@texhyphen@loaded@\the\language}{}%
+ \directlua{
+ if not luatexhyphen then
+ dofile(assert(kpse.find_file("luatex-hyphen.lua")))
+ end
+ luatexhyphen.loadlanguage("\luatexluaescapestring{#1}",
+ \the\language)}%
+ \fi
+ \fi
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+}
+\def\hyphenrules#1{%
+ \expandafter\ifx\csname l@#1\endcsname\@undefined
+ \@nolanerr{#1}%
+ \else
+ \bbl@patterns{#1}%
+ \languageshorthands{none}%
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname\relax
+ \fi
+ \fi
+ }
+\def\endhyphenrules{}
+\def\providehyphenmins#1#2{%
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \@namedef{#1hyphenmins}{#2}%
+ \fi}
+\def\set@hyphenmins#1#2{\lefthyphenmin#1\righthyphenmin#2}
+\def\LdfInit{%
+ \chardef\atcatcode=\catcode`\@
+ \catcode`\@=11\relax
+ \input babel.def\relax
+ \catcode`\@=\atcatcode \let\atcatcode\relax
+ \LdfInit}
+\ifx\originalTeX\@undefined\let\originalTeX\@empty\fi
+\ifx\babel@beginsave\@undefined\let\babel@beginsave\relax\fi
+\ifx\PackageError\@undefined
+ \def\@nolanerr#1{%
+ \errhelp{Your command will be ignored, type <return> to proceed}%
+ \errmessage{You haven't defined the language #1\space yet}}
+ \def\@nopatterns#1{%
+ \message{No hyphenation patterns were loaded for}%
+ \message{the language `#1'}%
+ \message{I will use the patterns loaded for \string\language=0
+ instead}}
+ \def\@noopterr#1{%
+ \errmessage{The option #1 was not specified in \string\usepackage}
+ \errhelp{You may continue, but expect unexpected results}}
+ \def\@activated#1{%
+ \wlog{Package babel Info: Making #1 an active character}}
+\else
+ \newcommand*{\@nolanerr}[1]{%
+ \PackageError{babel}%
+ {You haven't defined the language #1\space yet}%
+ {Your command will be ignored, type <return> to proceed}}
+ \newcommand*{\@nopatterns}[1]{%
+ \PackageWarningNoLine{babel}%
+ {No hyphenation patterns were loaded for\MessageBreak
+ the language `#1'\MessageBreak
+ I will use the patterns loaded for \string\language=0
+ instead}}
+ \newcommand*{\@noopterr}[1]{%
+ \PackageError{babel}%
+ {You haven't loaded the option #1\space yet}%
+ {You may proceed, but expect unexpected results}}
+ \newcommand*{\@activated}[1]{%
+ \PackageInfo{babel}{%
+ Making #1 an active character}}
+\fi
+\def\process@line#1#2 #3/{%
+ \ifx=#1
+ \process@synonym#2 /
+ \else
+ \process@language#1#2 #3/%
+ \fi
+ }
+\toks@{}
+\def\process@synonym#1 /{%
+ \ifnum\last@language=\m@ne
+ \expandafter\chardef\csname l@#1\endcsname0\relax
+ \wlog{\string\l@#1=\string\language0}
+ \toks@\expandafter{\the\toks@
+ \expandafter\let\csname #1hyphenmins\expandafter\endcsname
+ \csname\languagename hyphenmins\endcsname}%
+ \else
+ \expandafter\chardef\csname l@#1\endcsname\last@language
+ \wlog{\string\l@#1=\string\language\the\last@language}
+ \expandafter\let\csname #1hyphenmins\expandafter\endcsname
+ \csname\languagename hyphenmins\endcsname
+ \fi
+ }
+\def\process@language#1 #2 #3/{%
+ \expandafter\addlanguage\csname l@#1\endcsname
+ \expandafter\language\csname l@#1\endcsname
+ \def\languagename{#1}%
+% \end{macrocode}
+%
+% In the Lua\TeX case, we have to decide wether to load the language now.
+% Remember our choice, since we'll need it two times more.
+%
+% If we choose to load the language now, mark it as loaded. This is done
+% using \TeX\ macros in order to survive the format dumping-loading cycle,
+% which would not be as straigthforward using Lua objects.
+%
+% \begin{macrocode}
+ \ifx\directlua\@undefined
+ \global\toks8\expandafter{\the\toks8#1, }%
+ \else
+ \directlua{
+ if not luatexhyphen then
+ dofile(assert(kpse.find_file("luatex-hyphen.lua")))
+ end
+ processnow = (tex.language == 0) or
+ (luatexhyphen.lookupname("\luatexluaescapestring{#1}") == nil)}%
+ \ifnum0=\directlua{tex.sprint(processnow and "0" or "1")}\relax
+ \global\toks8\expandafter{\the\toks8#1, }%
+ \global\@namedef{lu@texhyphen@loaded@\the\language}{}%
+ \fi
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \begingroup
+ \bbl@get@enc#1:\@@@
+ \ifx\bbl@hyph@enc\@empty
+ \else
+ \fontencoding{\bbl@hyph@enc}\selectfont
+ \fi
+ \lefthyphenmin\m@ne
+% \end{macrocode}
+%
+% Conditionally input the patterns file.
+%
+% \begin{macrocode}
+ \ifx\directlua\@undefined
+ \input #2\relax
+ \else
+ \ifnum0=\directlua{tex.sprint(processnow and "0" or "1")}\relax
+ \input #2\relax
+ \fi
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \ifnum\lefthyphenmin=\m@ne
+ \else
+ \expandafter\xdef\csname #1hyphenmins\endcsname{%
+ \the\lefthyphenmin\the\righthyphenmin}%
+ \fi
+ \endgroup
+ \ifnum\the\language=\z@
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname
+ \fi
+ \the\toks@
+ \fi
+ \toks@{}%
+ \def\bbl@tempa{#3}%
+ \ifx\bbl@tempa\@empty
+ \else
+ \ifx\bbl@tempa\space
+ \else
+% \end{macrocode}
+%
+% Conditionnaly input the exceptions file.
+%
+% \begin{macrocode}
+ \ifx\directlua\@undefined
+ \input #3\relax
+ \else
+ \ifnum0=\directlua{tex.sprint(processnow and "0" or "1")}\relax
+ \input #3\relax
+ \fi
+ \directlua{processnow = nil}%
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \fi
+ \fi
+ }
+\def\bbl@get@enc#1:#2\@@@{%
+ \def\bbl@tempa{#1}%
+ \def\bbl@tempb{#2}%
+ \ifx\bbl@tempb\@empty
+ \let\bbl@hyph@enc\@empty
+ \else
+ \bbl@get@enc#2\@@@
+ \edef\bbl@hyph@enc{\bbl@tempa}%
+ \fi}
+\openin1 = language.dat
+\ifeof1
+ \message{I couldn't find the file language.dat,\space
+ I will try the file hyphen.tex}
+ \input hyphen.tex\relax
+\else
+ \last@language\m@ne
+ \loop
+ \endlinechar\m@ne
+ \read1 to \bbl@line
+ \endlinechar`\^^M
+ \ifx\bbl@line\@empty
+ \else
+ \edef\bbl@line{\bbl@line\space/}%
+ \expandafter\process@line\bbl@line
+ \fi
+ \iftrue \csname fi\endcsname
+ \csname if\ifeof1 false\else true\fi\endcsname
+ \repeat
+ \language=0
+\fi
+\closein1
+\let\process@language\@undefined
+\let\process@synonym\@undefined
+\let\process@line\@undefined
+\let\bbl@tempa\@undefined
+\let\bbl@tempb\@undefined
+\let\bbl@eq@\@undefined
+\let\bbl@line\@undefined
+\let\bbl@get@enc\@undefined
+\ifx\addto@hook\@undefined
+\else
+ \expandafter\addto@hook\expandafter\everyjob\expandafter{%
+ \expandafter\typeout\expandafter{\the\toks8 loaded.}}
+\fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</hyphen>
+% \end{macrocode}
+%
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/tex/luatex/hyph-utf8/etex.src b/Master/texmf-dist/tex/luatex/hyph-utf8/etex.src
new file mode 100644
index 00000000000..343c56eff02
--- /dev/null
+++ b/Master/texmf-dist/tex/luatex/hyph-utf8/etex.src
@@ -0,0 +1,928 @@
+%% e-TeX V2.1;0-luatex
+%% Revision-date: 26-APR-2010 11:05:45
+%% Revision-history: (at-end)
+
+% The version number in the first line is compared with the corresponding
+% element in e-TeX, and an error reported if incompatibility is detected.
+% The cycle and revision numbers (that is, the element(s) following the
+% period) are not used in this comparison, allowing enhancements to be made to
+% this module and recorded in its header without introducing a risk of conflict.
+%
+% This allows to use this file with e-TeX versions 2.0 and 2.1!
+%
+% Other files whose headers must be kept in synch include "etexdefs.lib" and
+% "language.def".
+
+% This is "etex.src", the (e-TeX) source file for the "etex" format file.
+% To build the format from it, use one of the following commands or the
+% local equivalent:
+
+% Generic: einitex *etex.src \dump
+% emTeX: etex -i *etex.src \dump
+% VMS: etex /init /noformat *"etex.src \dump"
+
+% Assume a purely IniTeX environment and set up a minimal \catcode r\'egime
+
+\catcode `\{=1
+\catcode `\}=2
+\catcode `\#=6
+\catcode `\^=7
+\catcode `\@=\catcode `\A
+
+% Define the basic error-reporting and abort mechanisms:
+
+\def \et@xmsg #1#2%
+ {\begingroup
+ \def \n {^^J}%
+ \def \ { }%
+ \newlinechar=\expandafter `\n
+ \if E#1%
+ \errorcontextlines=0
+ \errmessage {e-TeX error: #2}%
+ \else
+ \message {\n ! e-TeX \if I#1 message%
+ \else \if W#1 warning%
+ \else \if F#1 fatal error%
+ \else
+ \ unknown (#1)%
+ \fi
+ \fi
+ \fi: #2%
+ }%
+ \fi
+ \endgroup
+ }
+
+% Note: a future version may report errors in the %<fac>-<s>-<code>[, <text>]
+% format, allowing the more verbose <text>s to be read from file rather than
+% stored in the format.
+
+\def \et@xabort #1%
+ {\et@xmsg {F}{#1}%
+ \batchmode
+ \end
+ }
+
+% Make sure this file is being read by e-TeX in extended mode;
+% If it is, prepare to check version/revision compatibility, otherwise abort.
+
+\ifx \undefined \eTeXversion
+ \et@xabort {this file can be processed only in extended mode;\n
+ \ \ did you perhaps forget the asterisk?%
+ }%
+\else
+ \begingroup
+ \catcode `\%=12
+ \catcode `\?=14
+ \xdef \et@xfilehdr
+ {\detokenize {%% e-TeX V}\the \eTeXversion \eTeXrevision}?
+ \xdef \et@xlibhdr
+ {\detokenize {%% e-TeXlib V}\the \eTeXversion \eTeXrevision}?
+ \endgroup
+\fi
+
+% Assume extended mode, but no additional \catcodes/\defs yet;
+% set up a simple e-TeX condition-reporting system:
+
+\def \et@xinf #1{\et@xmsg {I}{#1}} %%% not currently used
+\def \et@xwarn #1{\et@xmsg {W}{#1}}
+\def \et@xerr #1#2{{\errhelp={#2}\et@xmsg {E}{#1}}}
+
+% deactivate the processing of patterns and exceptions; these will be
+% reinstated later, after the \uselanguage mechanism has been defined.
+
+\let \et@xpatterns=\patterns
+\def \patterns
+ {\begingroup
+ \everyeof={\fi \endgroup}%
+ \message {[skipping from \noexpand \patterns to end-of-file...]}%
+ \iffalse
+ }
+
+% Read "plain.tex" (\patterns & \hyphenation will be skipped)
+
+\input plain
+
+% restore the catcode of commercial-at (@), which will just have been clobbered
+
+\catcode `\@=\catcode `\A
+
+% Assume an extended Plain environment (i.e. there are no longer any
+% restrictions on the coding techniques we can use). First prepare to
+% carry out consistency checks on the file headers and the current e-TeX
+% version/revision levels:
+
+\newread \et@xinput
+
+\def \etexhdrchk #1#2%
+ {\openin \et@xinput=#2
+ \ifeof \et@xinput
+ \chardef \etexstatus=0 % V1.0-1
+ \else
+ \begingroup
+ \endlinechar=-1
+ \readline \et@xinput to \et@xbuf
+ \closein \et@xinput
+ \def \p@rtition ##1.##2\endp@rtition {##1}% V2.1%0
+ \xdef \et@xbuf
+ {\expandafter \p@rtition \et@xbuf .\endp@rtition}% V2.1;0
+ \xdef \et@xtmp {\csname et@x#1hdr\endcsname}%
+ \xdef \et@xtmp
+ {\expandafter \p@rtition \et@xtmp .\endp@rtition}% V2.1;0
+ \endgroup
+ \ifx \et@xtmp \et@xbuf
+ \chardef \etexstatus=2 % V1.1;4
+ \else
+ \chardef \etexstatus=1 % V1.1;4
+ \fi
+ \fi
+ }
+
+% Check the version number of this file:
+
+\def \et@xfmtsrc {etex.src}
+\etexhdrchk {file} {\et@xfmtsrc}
+\ifcase \etexstatus
+ \et@xerr {unable to open format source file "\et@xfmtsrc";}
+ {This should not happen; please ensure that your system
+ allows a file to be opened for reading more than once
+ concurrently.%
+ }%
+\or
+ \et@xwarn {format source file "\et@xfmtsrc" has wrong header;\n
+ \ \ expected: "\et@xfilehdr"; found: "\et@xbuf";%
+ }%
+ {You are using a version of e-TeX which may be incompatible
+ with the source for the format file you are trying to
+ compile; please ensure that you have the most recent
+ version of each. I will proceed, but you should treat
+ the results with caution...%
+ }%
+\fi
+
+% Module handling now implemented (V1.0-2)
+
+\def \module #1{\iftrue}
+\let \endmodule=\fi
+
+\newtoks \et@xtoks
+
+\def \et@xl@@d #1 #2\endl@ad %%% the "#1 #2" code avoids trailing spaces
+ {\ifcsname module:#1\endcsname
+ \et@xwarn {duplicate module name "#1"}%
+ \else
+ \csname module:#1\endcsname %%% we exploit the side-effect explicitly
+ \et@xtoks=\expandafter
+ {\the \et@xtoks
+ \expandafter \let \csname module:#1\endcsname=\undefined
+ }%
+ \fi
+ }
+
+\def \et@xl@ad #1#2,#3\endl@ad %%% the #1#2 code avoids spurious leading spaces
+ {\et@xl@@d #1#2 \endl@ad
+ \if *#3*
+ \let \n@xt=\relax
+ \else
+ \def \n@xt {\et@xl@ad #3\endl@ad}%
+ \fi
+ \n@xt
+ }
+
+\def \et@xload #1 %%% needed because of the embedded \ifs...
+ {\def \module ##1%
+ {\unless
+ \ifcsname module:##1\endcsname
+ \message {Skipping module "##1";}%
+ \else
+ \message {Loading module "##1";}%
+ }%
+ \input #1
+ \def \module ##1{\iftrue}%
+ }
+
+\def \load #1 from #2 %%% selective module loading from an e-TeX library file
+ {\etexhdrchk {lib} {#2}%
+ \ifcase \etexstatus
+ \et@xerr {unable to open library file "#2"; load aborted.}
+ {I got an <eof> on trying to open your library file;
+ please make sure it exists, is readable and is not locked.%
+ }%
+ \or
+ \et@xerr {library file "#2" has wrong header;\n
+ \ \ expected: "\et@xlibhdr"; found: "\et@xbuf";\n
+ \ \ load aborted.%
+ }%
+ {The first line of your library does not start with
+ the correct e-TeX header; you may need to update the
+ file to be compatible with the current version of
+ e-TeX, or you may simply have specified the wrong file.%
+ }%
+ \else
+ \et@xtoks={\et@xtoks={}}%
+ \et@xl@ad #1,\endl@ad
+ \et@xload {#2}
+ \the \et@xtoks
+ \fi
+ }
+
+\load interactionmodes from etexdefs.lib %%% \load <foo>[, <bar>...] from <baz>
+
+\def \@sk #1#2#3%
+ {\ifnum \interactionmode=\interactionmodes {errorstop} %%% V2.0;15
+ \def \pr@mpt {\csname #1 \endcsname}%
+ \edef \pr@mptloop {{\escapechar=-1 \global \readline 16 to \pr@mpt}}%
+ \loop \pr@mptloop
+ \ch@ckforyn \pr@mpt {#2}%
+ \ifb@dresponse
+ \message {Please answer Y[es] or N[o]}%
+ \repeat
+ \else
+ \def \pr@mpt {#3}%
+ \ch@ckforyn \pr@mpt {#2}%
+ \fi
+ }
+
+\def \ch@ckforyn #1#2% Bernd Raichle's improved version, V1.0-1
+ {\edef \@nswer {#1}%
+ \def \p@rse ##1##2\endp@rse
+ {\lowercase {\if y##1}\b@dresponsefalse \csname #2true\endcsname
+ \else \lowercase {\if n##1}\b@dresponsefalse \csname #2false\endcsname
+ \else
+ \b@dresponsetrue
+ \fi
+ \fi
+ }%
+ \expandafter \p@rse \@nswer \endp@rse
+ }
+
+\def \usef@llback %%% V1.0-3
+ {\message {Using fallback mode (USenglish)}%
+ \addlanguage {USenglish}{hyphen}{}{2}{3}%
+ }
+
+% OK, that's all the utilities defined; on with the real work:
+% First, re-instate \patterns:
+
+\let \patterns=\et@xpatterns
+
+% Define the language-handling commands
+
+\def \et@xlang {\csname newlanguage\endcsname}
+
+\def \uselanguage #1%
+ {\ifcsname lang@#1\endcsname
+ \language=\csname lang@#1\endcsname
+ \lefthyphenmin=\csname lhm@#1\endcsname
+ \righthyphenmin=\csname rhm@#1\endcsname
+ \ifdefined\directlua % V2.1;0-luatex
+ \ifcsname lu@texhyphen@loaded@\the\language\endcsname \else
+ \global\expandafter\def\csname
+ lu@texhyphen@loaded@\the\language\endcsname{}%
+ \directlua{
+ if not status.ini_version then
+ if not luatexhyphen then
+ dofile(assert(kpse.find_file("luatex-hyphen.lua")))
+ end
+ luatexhyphen.loadlanguage("\luatexluaescapestring{#1}",
+ \the\language)
+ end}%
+ \fi
+ \fi
+ \ifdefined \uselanguage@hook % V1.0-1
+ \uselanguage@hook {#1}% % V1.0-1
+ \fi
+ \else
+ \et@xerr {language #1 undefined.}%
+ {You are trying to use a language which has not previously
+ been defined; remember that any language you want to use
+ will need to have been specified at the time the format
+ was created.%
+ }%
+ \fi
+ }
+
+\def \addlanguage #1#2#3#4#5% language patterns exceptions lhm rhm
+ {\expandafter \et@xlang \csname lang@#1\endcsname
+ \expandafter \chardef \csname lhm@#1\endcsname=#4 % V1.0-1
+ \expandafter \chardef \csname rhm@#1\endcsname=#5 % V1.0-1
+ \ifdefined\directlua % V2.1;0-luatex
+ \csname fi\endcsname
+ \csname if\directlua{% do we want to skip this language now?
+ if not luatexhyphen then
+ dofile(assert(kpse.find_file("luatex-hyphen.lua")))
+ end
+ if (luatexhyphen.lookupname("\luatexluaescapestring{#1}") == nil)
+ or (\number\csname lang@#1\endcsname == 0) then
+ tex.sprint("false") % no, load it (execute 'else' part)
+ else
+ tex.sprint("true") % yes, skip
+ end}\endcsname
+ \else
+ \uselanguage {#1}%
+ \input #2
+ \if *#3*\else \input #3 \fi
+ \edef \fmtversion {\fmtversion/#1}%
+ \fi
+ \ifdefined \addlanguage@hook % V1.0-4
+ \addlanguage@hook {#1}% % V1.0-4
+ \fi
+ }
+
+% Decrement \count 19, because \newlanguage will increment it again
+
+\advance \count 19 by -1
+
+% We are about to try to process a user/site-specific file "language.def",
+% which establishes a Babel-like language selection environment. Since
+% there is always a risk of a spurious file of that name being found,
+% we look for an e-TeX header in the first line. If the file can be opened,
+% but doesn't have the right header, we interrogate the user as to whether
+% to use fallback mode; in this mode, we simply establish USenglish as the
+% sole language, with the et@x patterns, exceptions and left- and right-
+% hyphen minima for TeX. If we can't interrogate the user (e.g. not in
+% \errorstopmode), or if the user elects not to use fallback, we abort;
+% if the file can't be found/opened, we use fallback unconditionally.
+
+\newif \ifb@dresponse
+\newif \ifusef@llback
+
+\def \l@ngdefnfile {language.def}
+
+\etexhdrchk {file} {\l@ngdefnfile}
+\ifcase \etexstatus
+ \et@xwarn {unable to open file "\l@ngdefnfile";}%
+ \usef@llback % unable to open "language.def"
+\or
+ \et@xwarn {file "\l@ngdefnfile" has wrong header;\n
+ \ \ expected: "\et@xfilehdr"; found: "\et@xbuf";%
+ }%
+ \@sk {Use fallback?} {usef@llback} {y}%
+ \ifusef@llback
+ \usef@llback
+ \else
+ \input \l@ngdefnfile % use "language.def" after warning
+ \fi
+\else
+ \input \l@ngdefnfile % "language.def" open & valid
+\fi
+
+% All that was just to set up natural language handling...
+% The "real" work of "etex.src", however, is to augment the non-primitives
+% of Plain.TeX to incorporate e-TeX specific features, and to add new
+% non-primitives to simplify access to new e-TeX specific primitives.
+
+\message {Augmenting the Plain TeX definitions:}
+\message {\string \tracingall;}
+
+\def \tracingall
+ {\tracingonline=\@ne
+ \tracingcommands=\thr@@ % plain.tex has \tw@
+ \tracingstats=\tw@
+ \tracingpages=\@ne
+ \tracingoutput=\@ne
+ \tracinglostchars=\tw@ % plain.tex has \@ne
+ \tracingmacros=\tw@
+ \tracingparagraphs=\@ne
+ \tracingrestores=\@ne
+ \showboxbreadth=\maxdimen
+ \showboxdepth=\maxdimen
+ \errorstopmode
+ \tracinggroups=\@ne
+ \tracingifs=\@ne
+ \tracingscantokens=\@ne
+ \tracingnesting=\@ne
+ \tracingassigns=\tw@
+ }
+
+\message {Adding new e-TeX definitions:}
+
+\message {\string \eTeX,}
+\def \eTeX {$\varepsilon$-\TeX} %%% the simple version, not suitable for maths;
+ %%% a more sophisticated one may find its way
+ %%% into "etexdefs.lib" in due course.
+
+\message {\string \loggingall,}
+\def \loggingall {\tracingall \tracingonline=\z@}
+
+\message {\string \tracingnone,}
+\def \tracingnone
+ {\tracingassigns=\z@
+ \tracingnesting=\z@
+ \tracingscantokens=\z@
+ \tracingifs=\z@
+ \tracinggroups=\z@
+ \showboxdepth=\thr@@
+ \showboxbreadth=5
+ \tracingrestores=\z@
+ \tracingparagraphs=\z@
+ \tracingmacros=\z@
+ \tracinglostchars=\@ne
+ \tracingoutput=\z@
+ \tracingpages=\z@
+ \tracingstats=\z@
+ \tracingcommands=\z@
+ \tracingonline=\z@
+ }
+
+\message {register allocation;}
+
+\newcount \et@xins % our insertion counter (\insc@unt is used differently)
+
+% We have to adjust the Plain TeX register allocation counts for our
+% slightly modified book-keeping:
+
+\advance \count 10 by 1 % \count 10=23 % allocates \count registers 23, 24, ...
+\advance \count 11 by 1 % \count 11=10 % allocates \dimen registers 10, 11, ...
+\advance \count 12 by 1 % \count 12=10 % allocates \skip registers 10, 11, ...
+\advance \count 13 by 1 % \count 13=10 % allocates \muskip registers 10, 11, ...
+\advance \count 14 by 1 % \count 14=10 % allocates \box registers 10, 11, ...
+\advance \count 15 by 1 % \count 15=10 % allocates \toks registers 10, 11, ...
+\advance \count 16 by 1 % \count 16=0 % allocates input streams 0, 1, ...
+\advance \count 17 by 1 % \count 17=0 % allocates output streams 0, 1, ...
+\advance \count 18 by 1 % \count 18=4 % allocates math families 4, 5, ...
+\advance \count 19 by 1 % \count 19=0 % allocates \language codes 0, 1, ...
+
+\et@xins=\insc@unt % \et@xins=255 % allocates insertions 254, 253, ...
+
+% We don't change the Plain TeX definitions of \newcount, etc., but the
+% \alloc@ macro doing the actual work is redefined.
+
+% When the normal register pool for \count, \dimen, \skip, \muskip,
+% \box, or \toks registers is exhausted, we switch to the extended pool.
+
+\def \alloc@ #1#2#3#4#5%
+ {\ifnum \count 1#1 < #4% make sure there's still room
+ \allocationnumber=\count 1#1
+ \global \advance \count 1#1 by \@ne
+ \global #3#5=\allocationnumber
+ \wlog {\string #5=\string #2\the \allocationnumber}%
+ \else \ifnum #1 < 6
+ \begingroup \escapechar=\m@ne
+ \expandafter \alloc@@ \expandafter {\string #2}#5%
+ \else
+ \errmessage {No room for a new #2}%
+ \fi
+ \fi
+ }
+
+% The \expandafter construction used here allows the generation of
+% \newcount and \globcount from #1=count. Moreover (and more important)
+% this construction avoids the appearance of \outer macros inside
+% macro definitions or conditionals.
+
+\def \alloc@@ #1#2%
+ {\endgroup % restore \escapechar
+ \message {Normal \csname#1\endcsname register pool exhausted,
+ switching to extended pool.}%
+ \global \expandafter
+ \let \csname new#1\expandafter \endcsname \csname glob#1\endcsname
+ \csname new#1\endcsname#2%
+ }
+
+% We do change the Plain TeX definition of \newinsert
+
+\outer \def \newinsert #1%make sure there's still room for ...
+ {\ch@ck 0 \et@xins \count % ... a \count, ...
+ {\ch@ck 1 \et@xins \dimen % ... \dimen, ...
+ {\ch@ck 2 \et@xins \skip % ... \skip, ...
+ {\ch@ck 4 \et@xins \box % ... and \box register
+ {\global \advance \et@xins by \m@ne
+ \unless
+ \ifnum \insc@unt < \et@xins
+ \global \insc@unt=\et@xins
+ \fi
+ \allocationnumber=\et@xins
+ \global \chardef #1=\allocationnumber
+ \wlog {\string #1=\string \insert \the \allocationnumber}%
+ }%
+ }%
+ }%
+ }%
+ }
+
+\def \ch@ck #1#2#3#4%
+ {\ifnum \count 1#1 < #2#4\else \errmessage {No room for a new #3}\fi}
+
+% And we define \reserveinserts, so that you can say \reserveinserts{17}
+% in order to reserve room for up to 17 additional insertion classes that will
+% not be taken away by \newcount, \newdimen, \newskip, or \newbox.
+
+\outer \def \reserveinserts#1%
+ {\global \insc@unt=\numexpr \et@xins \ifnum #1 > \z@ -#1\fi \relax}
+
+\message {extended register allocation;}
+
+% Now, we define \globcount, \globbox, etc., so that you can say
+% \globcount\foo and \foo will be defined (with \countdef) to be the
+% next count register from the vastly larger but somewhat less efficient
+% extended register pool. We also define \loccount, etc., but these
+% register definitions are local to the current group.
+
+\count 260=277 % globally allocates \count registers 277, 278, ...
+\count 261=\@cclvi % globally allocates \dimen registers 256, 257, ...
+\count 262=\@cclvi % globally allocates \skip registers 256, 257, ...
+\count 263=\@cclvi % globally allocates \muskip registers 256, 257, ...
+\count 264=\@cclvi % globally allocates \box registers 256, 257, ...
+\count 265=\@cclvi % globally allocates \toks registers 256, 257, ...
+\count 266=\@ne % globally allocates \marks classes 1, 2, ...
+
+\def \et@xmaxregs {32768}
+
+\count 270=\et@xmaxregs % locally allocates \count registers 32767, 32766, ...
+\count 271=\et@xmaxregs % ditto for \dimen registers
+\count 272=\et@xmaxregs % ditto for \skip registers
+\count 273=\et@xmaxregs % ditto for \muskip registers
+\count 274=\et@xmaxregs % ditto for \box registers
+\count 275=\et@xmaxregs % ditto for \toks registers
+\count 276=\et@xmaxregs % ditto for \marks classes
+
+% \count registers 256-259 and 267-269 are not (yet) used
+
+\outer \def \globcount {\et@xglob 0 \count \countdef}
+ \def \loccount {\et@xloc 0 \count \countdef}
+\outer \def \globdimen {\et@xglob 1 \dimen \dimendef}
+ \def \locdimen {\et@xloc 1 \dimen \dimendef}
+\outer \def \globskip {\et@xglob 2 \skip \skipdef}
+ \def \locskip {\et@xloc 2 \skip \skipdef}
+\outer \def \globmuskip {\et@xglob 3 \muskip \muskipdef}
+ \def \locmuskip {\et@xloc 3 \muskip \muskipdef}
+\outer \def \globbox {\et@xglob 4 \box \mathchardef}
+ \def \locbox {\et@xloc 4 \box \mathchardef}
+\outer \def \globtoks {\et@xglob 5 \toks \toksdef}
+ \def \loctoks {\et@xloc 5 \toks \toksdef}
+\outer \def \globmarks {\et@xglob 6 \marks \mathchardef}
+ \def \locmarks {\et@xloc 6 \marks \mathchardef}
+
+\let\newmark=\globmarks %%% 2.0;14
+\let\newmarks=\globmarks
+
+\def \et@xglob #1#2#3#4%
+ {\et@xchk #1#2% make sure there's still room
+ {\allocationnumber=\count 26#1
+ \global \advance \count 26#1 by \@ne
+ \global #3#4=\allocationnumber
+ \wlog {\string #4=\string #2\the \allocationnumber}%
+ }%
+ }
+
+\def \et@xloc#1#2#3#4%
+ {\et@xchk #1#2% make sure there's still room
+ {\advance \count 27#1 by \m@ne
+ \allocationnumber=\count 27#1
+ #3#4=\allocationnumber
+ \wlog {\string #4=\string #2\the \allocationnumber \space (local)}%
+ }%
+ }
+
+\def \et@xchk #1#2#3%
+ {\ifnum \count 26#1 < \count 27#1
+ #3%
+ \else
+ \errmessage {No room for a new #2}%
+ \fi
+ }
+
+% Next we define \globcountblk, \loccountblk, etc., so that one can
+% write \globcountblk\foo{17} and \foo will be defined (with \mathchardef)
+% as the first (the zeroth?) of a block of 17 consecutive registers.
+% Thus the user is intended to reference elements <\foo+0> to <\foo+n-1>,
+% where n is the length of the block allocated.
+
+\outer \def \globcountblk {\et@xgblk 0 \count}
+ \def \loccountblk {\et@xlblk 0 \count}
+\outer \def \globdimenblk {\et@xgblk 1 \dimen}
+ \def \locdimenblk {\et@xlblk 1 \dimen}
+\outer \def \globskipblk {\et@xgblk 2 \skip}
+ \def \locskipblk {\et@xlblk 2 \skip}
+\outer \def \globmuskipblk {\et@xgblk 3 \muskip}
+ \def \locmuskipblk {\et@xlblk 3 \muskip}
+\outer \def \globboxblk {\et@xgblk 4 \box}
+ \def \locboxblk {\et@xlblk 4 \box}
+\outer \def \globtoksblk {\et@xgblk 5 \toks}
+ \def \loctoksblk {\et@xlblk 5 \toks}
+\outer \def \globmarksblk {\et@xgblk 6 \marks}
+ \def \locmarksblk {\et@xlblk 6 \marks}
+
+% And, both to provide a higher-level interface to the block allocation
+% scheme, and to demonstrate possible applications of the new \...expr
+% primitives, we also define \globcountvector and \loccountvector (etc)
+% which allow the user to access elements with embedded arithmetic, as in
+
+% \globcountvector \foo {12}
+% \foo {\count 0 + 3} = \foo {\count 1 * 2}
+
+\outer \def \globcountvector {\et@xgvec 0 \count}
+ \def \loccountvector {\et@xlvec 0 \count}
+\outer \def \globdimenvector {\et@xgvec 1 \dimen}
+ \def \locdimenvector {\et@xlvec 1 \dimen}
+\outer \def \globskipvector {\et@xgvec 2 \skip}
+ \def \locskipvector {\et@xlvec 2 \skip}
+\outer \def \globmuskipvector {\et@xgvec 3 \muskip}
+ \def \locmuskipvector {\et@xlvec 3 \muskip}
+\outer \def \globboxvector {\et@xgvec 4 \box}
+ \def \locboxvector {\et@xlvec 4 \box}
+\outer \def \globtoksvector {\et@xgvec 5 \toks}
+ \def \loctoksvector {\et@xlvec 5 \toks}
+\outer \def \globmarksvector {\et@xgvec 6 \marks}
+ \def \locmarksvector {\et@xlvec 6 \marks}
+
+\def \et@xgblk #1#2#3#4%
+ {\et@xchkblk #1#2{#4}% make sure there's still room
+ {\allocationnumber=\count 26#1
+ \global \advance \count 26#1 by #4%
+ \global \mathchardef #3=\allocationnumber
+ \wlog {\string #3=\string #2blk{\number #4} at \the \allocationnumber}%
+ }%
+ }
+
+\def \et@xlblk #1#2#3#4%
+ {\et@xchkblk #1#2{#4}% make sure there's still room
+ {\advance \count 27#1 by -#4%
+ \allocationnumber=\count 27#1
+ \mathchardef #3=\allocationnumber
+ \wlog {\string #3=\string #2blk{\number #4}
+ at \the \allocationnumber \space (local)%
+ }%
+ }%
+ }
+
+\begingroup
+\catcode `\# = 12
+\gdef \et@xhash {#}
+\endgroup
+
+\def \et@xgvec #1#2#3#4%
+ {\et@xchkblk #1#2{#4}% make sure there's still room
+ {\allocationnumber=\count 26#1
+ \global \advance \count 26#1 by #4%
+ \ifx #2\box
+ \def \2{}%
+ \else \ifx #2\marks
+ \def \2{}%
+ \else
+ \def \2{\string #2}%
+ \fi
+ \fi
+ \xdef #3##1{\2 \noexpand \numexpr \the \allocationnumber+##1\relax}%
+ \wlog {\string #3 {\et@xhash 1} =
+ \2 {\the \allocationnumber+\et@xhash 1} (global #2 vector)%
+ }%
+ }%
+ }
+
+\def \et@xlvec #1#2#3#4%
+ {\et@xchkblk #1#2{#4}% make sure there's still room
+ {\advance \count 27#1 by -#4%
+ \allocationnumber=\count27#1
+ \mathchardef #3=\allocationnumber
+ \ifx #2\box
+ \def \2{}%
+ \else \ifx #2\marks
+ \def \2{}%
+ \else
+ \def \2{\string #2}%
+ \fi
+ \fi
+ \edef #3##1{\2 \noexpand \numexpr \the \allocationnumber+##1\relax}%
+ \wlog {\string #3 {\et@xhash 1} =
+ \2 {\the \allocationnumber+\et@xhash 1} (local #2 vector)%
+ }%
+ }%
+ }
+
+\def \et@xchkblk #1#2#3#4%
+ {\ifnum #3 < \z@
+ \errmessage {Negative register block size \number #3}%
+ \else \ifnum \numexpr \count 26#1+#3 > \count 27#1
+ \errmessage {No room for new #2block of size \number#3}%
+ \else
+ #4%
+ \fi
+ \fi
+ }
+
+% In an attempt to reduce the overheads of e-TeX, we recycle all possible
+% resources, including (as a penultimate step) the recycler itself...
+% The user can circumvent (or force) this during format creation,
+% by \letting \ifrecycle=\iffalse (or \iftrue, to force it).
+
+% As this file has grown by accretion, it is possible that we are no
+% longer recycling all the resources we could; this will be investigated.
+
+\def \mayber@cycle {\expandafter \ifrecycle}
+\def \forcer@cycle {\expandafter \iftrue}
+
+\ifdefined \ifrecycle
+ \mayber@cycle
+\else
+ \forcer@cycle
+\fi
+
+% There's a concealed \if... lurking here, which explains the
+% strange indentation of the code that follows (V1.0-1)
+
+ \def \r@cycle #1%
+ {\ifdefined #1
+ \message {\string #1,}\let #1=\und@fined
+ \else
+ \message {\string #1 (not defined),}
+ \fi
+ }
+ {\newlinechar=`\! \message {!Recycling:}}
+
+ \r@cycle \addlanguage
+ \r@cycle \@nswer
+ \r@cycle \@sk
+ \r@cycle \b@dresponsetrue
+ \r@cycle \b@dresponsefalse
+ \r@cycle \ch@ckforyn
+ \r@cycle \mayber@cycle
+ \r@cycle \et@xabort
+ \r@cycle \et@xbuf
+ \r@cycle \et@xfmtsrc
+ \r@cycle \et@xfilehdr
+ \r@cycle \et@xinf
+ \r@cycle \et@xpatterns
+% \r@cycle \ifb@dresponse
+% \r@cycle \ifusef@llback
+ \r@cycle \l@ngdefnfile
+ \r@cycle \n@xt
+ \r@cycle \p@rse
+ \r@cycle \pr@mpt
+ \r@cycle \pr@mptloop
+ \r@cycle \forcer@cycle
+ \r@cycle \usef@llback
+ \r@cycle \usef@llbacktrue
+ \r@cycle \usef@llbackfalse
+
+% The following are retained, since they may be needed by user code; with a few
+% (regrettable) exceptions, all of these are given the \etex or \et@x prefix,
+% to reduce as far as possible the risk of them clashing with other used-defined
+% names.
+
+% The e-TeX team are willing to change the names of the remaining, at-risk,
+% control sequences if it is demonstrated that the current names cause problems
+% or difficulties.
+
+ \def \r@tain #1%
+ {\ifdefined #1
+ \message {\string #1,}
+ \else
+ \message {\string #1 (not defined),}
+ \fi
+ }
+ {\newlinechar=`\! \message {!Retaining:}}
+
+ \r@tain \et@xerr
+ \r@tain \et@xinput
+ \r@tain \et@xlibhdr
+ \r@tain \et@xmsg
+ \r@tain \et@xtoks
+ \r@tain \et@xwarn
+ \r@tain \et@xl@@d
+ \r@tain \et@xl@ad
+ \r@tain \et@xload
+ \r@tain \et@xlang
+ \r@tain \et@xhash
+ \r@tain \eTeX
+ \r@tain \etexhdrchk
+% \r@tain \endmodule
+ \r@tain \etexstatus
+ \r@tain \module
+ \r@tain \uselanguage
+
+ \r@cycle \r@tain
+ \r@cycle \r@cycle
+
+\fi
+
+% And finally re-catcode commercial-at
+
+\catcode `\@=12
+\endinput
+
+%% Revision-history:
+
+3-MAY-2010: 2.1;0-luatex With LuaTeX, don't embed hyphenation patterns and
+ exceptions in the format, but on-demand at runtime, for faster
+ format loading. Use the Lua interface for loading hyphenation
+ rules from plain text files according to the new configuration
+ file language.lua.dat. Make use of a supporting lua file,
+ luatex-hyphen.lua. See also luatex-hyphen.pdf.
+ (Manuel Pegourie-Gonnard, Elie Roux and Khaled Hosny)
+
+01-FEB-1999: 2.1;0 Allow file to be used with e-TeX versions 2.0 and 2.1
+
+25-MAR-1998: 2.0;19 Improved log message for \{glob|loc}{marks|box}vector (PEB)
+
+24-MAR-1998: 2.0;18 Optimisation of one section made (DC & PEB),
+ a couple of \if tests made more robust,
+ and spacing improved in one macro.
+
+24-MAR-1998: 2.0;17 Coding styles unified and all references to Peter
+ Breitenlohner eliminated from main code
+
+23-MAR-1998: 2.0;16 Continued from 2.0;15
+
+20-MAR-1998: 2.0;15 Changes made here and in "etexdefs.lib" to
+ improve compatibility with LaTeX, and
+ \{glob,loc}{marks,box}vector re-thought.
+
+11-MAR-1998: 2.0;14 \newmark made synonym for \newmarks / PT
+
+10-MAR-1998: 2.0;13 Missing brace re-inserted in \...lvec /PT
+
+10-MAR-1998: 2.0;12 Typo corrected in Peter's name /PT
+
+10-MAR-1998: 2.0;11 "\...lvec" failed to use \et@xhash; fixed / PT
+
+10-MAR-1998: 2.0;10 \h@sh -> \et@xhash /PT
+
+06-MAR-1998: 2.0;9 Final tweaks by PEB !
+
+05-MAR-1998: <missing version number> Final tweaks by PT
+
+28-Feb-1998: 2.0;8 Major re-work by PEB
+
+24-Feb-1998: 2.0;7 \tracingnesting -> \tw@
+
+24-FEB-1998: 2.0;6 version-mismatch reduced in severity;
+ \tracingall and ...none improved;
+ aesthetic spaces around "=" removed
+
+24-Jan-1998: 2.0;5: block allocation of registers added
+
+21-Jan-1998: 2.0;4: released to e-TeX team for testing/comments
+
+20-Jan-1998: \glob... implemented, and coding simplified by
+ the implementation and use of of \max@xpr
+
+06-Jan-1998: Alpha-testing complete of extended and local register allocation.
+
+29-Dec-1997: The "%!" convention replaced by a corresponding "%%":
+ this should avoid any inadvertent conflict with Adobe conventions.
+
+ \tracingall augmented with
+ \tracinglostchars=\tw@ %%% Q -- should this be default?
+ \tracingnesting=\@ne
+
+ \tracingnone augmented.
+
+05-DEC-1997: A long-standing bug removed: left- and right- hyphenmin
+ were transposed in fallback mode :-(((((
+
+24-APR-1997: An interim release, to provide compatibility with Peter's
+ naming conventions for beta-test versions of e-TeX V2.
+ Consistency checking is now restricted to \eTeXversion,
+ and \eTeXrevision is ignored.
+
+01-NOV-1996: V1.1;5: Final stage? Checking that everything possible
+ is recycled whilst nothing that is needed is lost. Retained
+ names given \etex or \et@x prefix wherever possible. Some
+ potentially dangerous cs-names commented out of the recycle/retain
+ lists because they were synonyms of members of the if-else-fi set.
+ The definition of the e-TeX logo added: this had somehow slipped
+ through the net! Intended to be the final revision before public
+ release, but awaiting comments from other members of the team.
+
+31-OCT-1996: V1.1;4: errors noticed while proof-reading corrected; far
+ greater use made of concealed control sequences with
+ commercial-at (@); library file headers differentiated
+ from ordinary file headers; return-values for header-check
+ altered to allow fall-thru' if ok; fallback-use algorithm
+ significantly modified (major semantic shift).
+
+29-OCT-1996: V1.1;3: tidying up prior to release; careful check on
+ which control words can be re-cycled; \recycle made more
+ robust, to check whether one is trying to re-cycle something
+ that was never 'cycled' in the first place (PEB suggestion);
+ \et@xmsg re-written to use \message or \errmessage as necessary;
+ \errhelps provided for all places they might be referenced.
+
+27-OCT-1996: V1.1;2: minor version numbers re-introduced, using semi-colon
+ as delimiter and stopping pattern matching at the semi-colon;
+ \et@xfilehdr defined dynamically, based in \eTeXversion and
+ \eTeXrevision; \load now uses \etexhdrchk, so library
+ files are required to start with an e-TeX header; this will
+ have implications when e-TeX -> V2+, so this code should be
+ re-considered at this point.
+
+17-OCT-1996: V1.1: minor version numbers eliminated, to reduce the
+ need for users to update their "language.def" files.
+
+17-OCT-1996: V1.0-4: \addlanguage@hook added, version history moved to end.
+
+17-OCT-1996: Version 1.0-3 does away with the "fallback" file.
+
+16-OCT-1996: Version 1.0-2 implements module handling, so constant "3"
+ no longer used (see below).
+
+13-Oct-1996: Replaced \def by \chardef where possible;
+ eliminated dependency on "etexdefs.def", hard-coding
+ in the constant "3" (with comment) instead;
+ used Bernd's \ch@ckforyn;
+ re-catcoded `\@ earlier, to reduce number of \[if]csnames;
+ commented the strange indentation of the \recycles at end.
+
+11-Oct-1996: language handling commands modified (V1.0): PT/BR
diff --git a/Master/texmf-dist/tex/luatex/hyph-utf8/hyphen.cfg b/Master/texmf-dist/tex/luatex/hyph-utf8/hyphen.cfg
new file mode 100644
index 00000000000..d7dfc419340
--- /dev/null
+++ b/Master/texmf-dist/tex/luatex/hyph-utf8/hyphen.cfg
@@ -0,0 +1,426 @@
+%%
+%% This is file `hyphen.cfg',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% luatex-hyphen.dtx (with options: `hyphen')
+%%
+%% This is a modified version of the hyphen.cfg file from the babel system,
+%% intended for use with LuaTeX, but compatible with other engines.
+%% The present file IS NOT part of the babel system.
+%%
+%% The modifications are Copyright 2010 Khaled Hosny, Elie Roux, and Manuel
+%% Pegourie-Gonnard, under LPPL version 1.3 or later.
+%%
+%% Here is the licence statement of the original hyphen.cfg file:
+%% |
+%% | Copyright 1989-2008 Johannes L. Braams and any individual authors
+%% | Listed elsewhere in this file. All rights reserved.
+%% |
+%% | It may be distributed and/or modified under the
+%% | Conditions of the LaTeX Project Public License, either version 1.3
+%% | Of this license or (at your option) any later version.
+%% | The latest version of this license is in
+%% | http://www.latex-project.org/lppl.txt
+%% | And version 1.3 or later is part of all distributions of LaTeX
+%% | Version 2003/12/01 or later.
+%% |
+%% | This work has the LPPL maintenance status "maintained".
+%% |
+%% | The Current Maintainer of this work is Johannes Braams.
+%% |
+%% `---=(licence statement of original hyphen.cfg)=---
+%%
+\ifx\ProvidesFile\@undefined
+ \def\ProvidesFile#1[#2 #3 #4]{%
+ \wlog{File: #1 #4 #3 <#2>}%
+ \ifx\directlua\@undefined
+ \toks8{Babel <#3> and hyphenation patterns for }%
+ \else
+ \toks8{LuaTeX adaptation of babel <#3>
+ and hyphenation patterns for }%
+ \fi
+ \let\ProvidesFile\@undefined
+ }
+ \def\ProvidesLanguage#1[#2 #3 #4]{%
+ \wlog{Language: #1 #4 #3 <#2>}%
+ }
+\else
+ \let\bbl@tempa\ProvidesFile
+ \def\ProvidesFile#1[#2 #3 #4]{%
+ \ifx\directlua\@undefined
+ \toks8{Babel <#3> and hyphenation patterns for }%
+ \else
+ \toks8{LuaTeX adaptation of babel <#3>
+ and hyphenation patterns for }%
+ \fi
+ \bbl@tempa#1[#2 #3 #4]%
+ \let\ProvidesFile\bbl@tempa}
+ \def\ProvidesLanguage#1{%
+ \begingroup
+ \catcode`\ 10 %
+ \@makeother\/%
+ \@ifnextchar[%]
+ {\@provideslanguage{#1}}{\@provideslanguage{#1}[]}}
+ \def\@provideslanguage#1[#2]{%
+ \wlog{Language: #1 #2}%
+ \expandafter\xdef\csname ver@#1.ldf\endcsname{#2}%
+ \endgroup}
+\fi
+
+\ProvidesFile{hyphen.cfg}
+ [2010/04/26 v3.8l-luatex-1.3beta %
+ Language switching mechanism for LuaTeX, adapted from babel v3.8l]
+\ifx\AtBeginDocument\@undefined
+ \input plain.def\relax
+\fi
+\ifx\language\@undefined
+ \csname newcount\endcsname\language
+\fi
+\ifx\newlanguage\@undefined
+ \csname newcount\endcsname\last@language
+\else
+ \countdef\last@language=19
+\fi
+\ifx\newlanguage\@undefined
+ \def\addlanguage#1{%
+ \global\advance\last@language \@ne
+ \ifnum\last@language<\@cclvi
+ \else
+ \errmessage{No room for a new \string\language!}%
+ \fi
+ \global\chardef#1\last@language
+ \wlog{\string#1 = \string\language\the\last@language}}
+\else
+ \def\addlanguage{\alloc@9\language\chardef\@cclvi}
+\fi
+\def\adddialect#1#2{%
+ \global\chardef#1#2\relax
+ \wlog{\string#1 = a dialect from \string\language#2}}
+\def\iflanguage#1{%
+ \expandafter\ifx\csname l@#1\endcsname\relax
+ \@nolanerr{#1}%
+ \else
+ \bbl@afterfi{\ifnum\csname l@#1\endcsname=\language
+ \expandafter\@firstoftwo
+ \else
+ \expandafter\@secondoftwo
+ \fi}%
+ \fi}
+\edef\selectlanguage{%
+ \noexpand\protect
+ \expandafter\noexpand\csname selectlanguage \endcsname
+ }
+\ifx\@undefined\protect\let\protect\relax\fi
+\ifx\documentclass\@undefined
+ \def\xstring{\string\string\string}
+\else
+ \let\xstring\string
+\fi
+\xdef\bbl@language@stack{}
+\def\bbl@push@language{%
+ \xdef\bbl@language@stack{\languagename+\bbl@language@stack}%
+ }
+\def\bbl@pop@lang#1+#2-#3{%
+ \def\languagename{#1}\xdef#3{#2}%
+ }
+\def\bbl@pop@language{%
+ \expandafter\bbl@pop@lang\bbl@language@stack-\bbl@language@stack
+ \expandafter\bbl@set@language\expandafter{\languagename}%
+ }
+\expandafter\def\csname selectlanguage \endcsname#1{%
+ \bbl@push@language
+ \aftergroup\bbl@pop@language
+ \bbl@set@language{#1}}
+\def\bbl@set@language#1{%
+ \edef\languagename{%
+ \ifnum\escapechar=\expandafter`\string#1\@empty
+ \else \string#1\@empty\fi}%
+ \select@language{\languagename}%
+ \if@filesw
+ \protected@write\@auxout{}{\string\select@language{\languagename}}%
+ \addtocontents{toc}{\xstring\select@language{\languagename}}%
+ \addtocontents{lof}{\xstring\select@language{\languagename}}%
+ \addtocontents{lot}{\xstring\select@language{\languagename}}%
+ \fi}
+\def\select@language#1{%
+ \expandafter\ifx\csname l@#1\endcsname\relax
+ \@nolanerr{#1}%
+ \else
+ \expandafter\ifx\csname date#1\endcsname\relax
+ \@noopterr{#1}%
+ \else
+ \bbl@patterns{\languagename}%
+ \originalTeX
+ \expandafter\def\expandafter\originalTeX
+ \expandafter{\csname noextras#1\endcsname
+ \let\originalTeX\@empty}%
+ \languageshorthands{none}%
+ \babel@beginsave
+ \csname captions#1\endcsname
+ \csname date#1\endcsname
+ \csname extras#1\endcsname\relax
+ \babel@savevariable\lefthyphenmin
+ \babel@savevariable\righthyphenmin
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname\relax
+ \fi
+ \fi
+ \fi}
+\long\def\otherlanguage#1{%
+ \csname selectlanguage \endcsname{#1}%
+ \ignorespaces
+ }
+\long\def\endotherlanguage{%
+ \originalTeX
+ \global\@ignoretrue\ignorespaces
+ }
+\expandafter\def\csname otherlanguage*\endcsname#1{%
+ \foreign@language{#1}%
+ }
+\expandafter\def\csname endotherlanguage*\endcsname{%
+ \csname noextras\languagename\endcsname
+ }
+\def\foreignlanguage{\protect\csname foreignlanguage \endcsname}
+\expandafter\def\csname foreignlanguage \endcsname#1#2{%
+ \begingroup
+ \originalTeX
+ \foreign@language{#1}%
+ #2%
+ \csname noextras#1\endcsname
+ \endgroup
+ }
+\def\foreign@language#1{%
+ \def\languagename{#1}%
+ \expandafter\ifx\csname l@#1\endcsname\relax
+ \@nolanerr{#1}%
+ \else
+ \bbl@patterns{\languagename}%
+ \languageshorthands{none}%
+ \csname extras#1\endcsname
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname\relax
+ \fi
+ \fi
+ }
+\def\bbl@patterns#1{%
+ \language=\expandafter\ifx\csname l@#1:\f@encoding\endcsname\relax
+ \csname l@#1\endcsname
+ \else
+ \csname l@#1:\f@encoding\endcsname
+ \fi\relax
+ \ifx\directlua\@undefined\else
+ \ifx\directlua\relax\else
+ \ifcsname lu@texhyphen@loaded@\the\language\endcsname \else
+ \global\@namedef{lu@texhyphen@loaded@\the\language}{}%
+ \directlua{
+ if not luatexhyphen then
+ dofile(assert(kpse.find_file("luatex-hyphen.lua")))
+ end
+ luatexhyphen.loadlanguage("\luatexluaescapestring{#1}",
+ \the\language)}%
+ \fi
+ \fi
+ \fi
+}
+\def\hyphenrules#1{%
+ \expandafter\ifx\csname l@#1\endcsname\@undefined
+ \@nolanerr{#1}%
+ \else
+ \bbl@patterns{#1}%
+ \languageshorthands{none}%
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname\relax
+ \fi
+ \fi
+ }
+\def\endhyphenrules{}
+\def\providehyphenmins#1#2{%
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \@namedef{#1hyphenmins}{#2}%
+ \fi}
+\def\set@hyphenmins#1#2{\lefthyphenmin#1\righthyphenmin#2}
+\def\LdfInit{%
+ \chardef\atcatcode=\catcode`\@
+ \catcode`\@=11\relax
+ \input babel.def\relax
+ \catcode`\@=\atcatcode \let\atcatcode\relax
+ \LdfInit}
+\ifx\originalTeX\@undefined\let\originalTeX\@empty\fi
+\ifx\babel@beginsave\@undefined\let\babel@beginsave\relax\fi
+\ifx\PackageError\@undefined
+ \def\@nolanerr#1{%
+ \errhelp{Your command will be ignored, type <return> to proceed}%
+ \errmessage{You haven't defined the language #1\space yet}}
+ \def\@nopatterns#1{%
+ \message{No hyphenation patterns were loaded for}%
+ \message{the language `#1'}%
+ \message{I will use the patterns loaded for \string\language=0
+ instead}}
+ \def\@noopterr#1{%
+ \errmessage{The option #1 was not specified in \string\usepackage}
+ \errhelp{You may continue, but expect unexpected results}}
+ \def\@activated#1{%
+ \wlog{Package babel Info: Making #1 an active character}}
+\else
+ \newcommand*{\@nolanerr}[1]{%
+ \PackageError{babel}%
+ {You haven't defined the language #1\space yet}%
+ {Your command will be ignored, type <return> to proceed}}
+ \newcommand*{\@nopatterns}[1]{%
+ \PackageWarningNoLine{babel}%
+ {No hyphenation patterns were loaded for\MessageBreak
+ the language `#1'\MessageBreak
+ I will use the patterns loaded for \string\language=0
+ instead}}
+ \newcommand*{\@noopterr}[1]{%
+ \PackageError{babel}%
+ {You haven't loaded the option #1\space yet}%
+ {You may proceed, but expect unexpected results}}
+ \newcommand*{\@activated}[1]{%
+ \PackageInfo{babel}{%
+ Making #1 an active character}}
+\fi
+\def\process@line#1#2 #3/{%
+ \ifx=#1
+ \process@synonym#2 /
+ \else
+ \process@language#1#2 #3/%
+ \fi
+ }
+\toks@{}
+\def\process@synonym#1 /{%
+ \ifnum\last@language=\m@ne
+ \expandafter\chardef\csname l@#1\endcsname0\relax
+ \wlog{\string\l@#1=\string\language0}
+ \toks@\expandafter{\the\toks@
+ \expandafter\let\csname #1hyphenmins\expandafter\endcsname
+ \csname\languagename hyphenmins\endcsname}%
+ \else
+ \expandafter\chardef\csname l@#1\endcsname\last@language
+ \wlog{\string\l@#1=\string\language\the\last@language}
+ \expandafter\let\csname #1hyphenmins\expandafter\endcsname
+ \csname\languagename hyphenmins\endcsname
+ \fi
+ }
+\def\process@language#1 #2 #3/{%
+ \expandafter\addlanguage\csname l@#1\endcsname
+ \expandafter\language\csname l@#1\endcsname
+ \def\languagename{#1}%
+ \ifx\directlua\@undefined
+ \global\toks8\expandafter{\the\toks8#1, }%
+ \else
+ \directlua{
+ if not luatexhyphen then
+ dofile(assert(kpse.find_file("luatex-hyphen.lua")))
+ end
+ processnow = (tex.language == 0) or
+ (luatexhyphen.lookupname("\luatexluaescapestring{#1}") == nil)}%
+ \ifnum0=\directlua{tex.sprint(processnow and "0" or "1")}\relax
+ \global\toks8\expandafter{\the\toks8#1, }%
+ \global\@namedef{lu@texhyphen@loaded@\the\language}{}%
+ \fi
+ \fi
+ \begingroup
+ \bbl@get@enc#1:\@@@
+ \ifx\bbl@hyph@enc\@empty
+ \else
+ \fontencoding{\bbl@hyph@enc}\selectfont
+ \fi
+ \lefthyphenmin\m@ne
+ \ifx\directlua\@undefined
+ \input #2\relax
+ \else
+ \ifnum0=\directlua{tex.sprint(processnow and "0" or "1")}\relax
+ \input #2\relax
+ \fi
+ \fi
+ \ifnum\lefthyphenmin=\m@ne
+ \else
+ \expandafter\xdef\csname #1hyphenmins\endcsname{%
+ \the\lefthyphenmin\the\righthyphenmin}%
+ \fi
+ \endgroup
+ \ifnum\the\language=\z@
+ \expandafter\ifx\csname #1hyphenmins\endcsname\relax
+ \set@hyphenmins\tw@\thr@@\relax
+ \else
+ \expandafter\expandafter\expandafter\set@hyphenmins
+ \csname #1hyphenmins\endcsname
+ \fi
+ \the\toks@
+ \fi
+ \toks@{}%
+ \def\bbl@tempa{#3}%
+ \ifx\bbl@tempa\@empty
+ \else
+ \ifx\bbl@tempa\space
+ \else
+ \ifx\directlua\@undefined
+ \input #3\relax
+ \else
+ \ifnum0=\directlua{tex.sprint(processnow and "0" or "1")}\relax
+ \input #3\relax
+ \fi
+ \directlua{processnow = nil}%
+ \fi
+ \fi
+ \fi
+ }
+\def\bbl@get@enc#1:#2\@@@{%
+ \def\bbl@tempa{#1}%
+ \def\bbl@tempb{#2}%
+ \ifx\bbl@tempb\@empty
+ \let\bbl@hyph@enc\@empty
+ \else
+ \bbl@get@enc#2\@@@
+ \edef\bbl@hyph@enc{\bbl@tempa}%
+ \fi}
+\openin1 = language.dat
+\ifeof1
+ \message{I couldn't find the file language.dat,\space
+ I will try the file hyphen.tex}
+ \input hyphen.tex\relax
+\else
+ \last@language\m@ne
+ \loop
+ \endlinechar\m@ne
+ \read1 to \bbl@line
+ \endlinechar`\^^M
+ \ifx\bbl@line\@empty
+ \else
+ \edef\bbl@line{\bbl@line\space/}%
+ \expandafter\process@line\bbl@line
+ \fi
+ \iftrue \csname fi\endcsname
+ \csname if\ifeof1 false\else true\fi\endcsname
+ \repeat
+ \language=0
+\fi
+\closein1
+\let\process@language\@undefined
+\let\process@synonym\@undefined
+\let\process@line\@undefined
+\let\bbl@tempa\@undefined
+\let\bbl@tempb\@undefined
+\let\bbl@eq@\@undefined
+\let\bbl@line\@undefined
+\let\bbl@get@enc\@undefined
+\ifx\addto@hook\@undefined
+\else
+ \expandafter\addto@hook\expandafter\everyjob\expandafter{%
+ \expandafter\typeout\expandafter{\the\toks8 loaded.}}
+\fi
+\endinput
+%%
+%% End of file `hyphen.cfg'.
diff --git a/Master/texmf-dist/tex/luatex/hyph-utf8/luatex-hyphen.lua b/Master/texmf-dist/tex/luatex/hyph-utf8/luatex-hyphen.lua
new file mode 100644
index 00000000000..fd68da74710
--- /dev/null
+++ b/Master/texmf-dist/tex/luatex/hyph-utf8/luatex-hyphen.lua
@@ -0,0 +1,77 @@
+--
+-- This is file `luatex-hyphen.lua',
+-- generated with the docstrip utility.
+--
+-- The original source files were:
+--
+-- luatex-hyphen.dtx (with options: `lua')
+--
+-- This is a generated file (source: luatex-hyphen.dtx).
+--
+-- Copyright (C) 2010 by The LuaLaTeX development team.
+--
+-- This work is under the CC0 license.
+--
+local error, dofile, pairs, ipairs = error, dofile, pairs, ipairs
+local io, texio, lang, kpse = io, texio, lang, kpse
+module('luatexhyphen')
+local function wlog(msg, ...)
+ texio.write_nl('log', 'luatex-hyphen: '..msg:format(...))
+end
+local function err(msg, ...)
+ error('luatex-hyphen: '..msg:format(...), 2)
+end
+local dbname = "language.dat.lua"
+local language_dat
+local dbfile = kpse.find_file(dbname)
+if not dbfile then
+ err("file not found: "..dbname)
+else
+ language_dat = dofile(dbfile)
+end
+function lookupname(name)
+ if language_dat[name] then
+ return language_dat[name], name
+ else
+ for canon, data in pairs(language_dat) do
+ for _,syn in ipairs(data.synonyms) do
+ if syn == name then
+ return data, canon
+ end
+ end
+ end
+ end
+end
+function loadlanguage(lname, id)
+ local msg = "loading%s patterns and exceptions for: %s (\\language%d)"
+ local ldata, cname = lookupname(lname)
+ if not ldata then
+ err("no entry in %s for this language: %s", dbname, lname)
+ end
+ if ldata.special then
+ if ldata.special == 'null' then
+ wlog(msg, ' (null)', cname, id)
+ return
+ elseif ldata.special:find('^disabled:') then
+ err("language disabled by %s: %s (%s)", dbname, cname,
+ ldata.special:gsub('^disabled:', ''))
+ elseif ldata.special == 'language0' then
+ err("\\language0 should be dumped in the format")
+ else
+ err("bad entry in %s for language %s")
+ end
+ end
+ wlog(msg, '', cname, id)
+ for _, item in ipairs{'hyphenation', 'patterns'} do
+ local file = ldata[item]
+ if file ~= nil and file ~= '' then
+ local file = kpse.find_file(file) or err("file not found: %s", file)
+ local fh = io.open(file, 'r')
+ local data = fh:read('*a') or err("file not readable: %s", f)
+ fh:close()
+ lang[item](lang.new(id), data)
+ end
+ end
+end
+--
+-- End of File `luatex-hyphen.lua'.