summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdfbin418609 -> 422728 bytes
-rw-r--r--Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx374
-rw-r--r--Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty192
3 files changed, 351 insertions, 215 deletions
diff --git a/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf b/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf
index 80f13ee4382..d93901c70fe 100644
--- a/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf
+++ b/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx b/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx
index c3aaadec488..095ec34bfdc 100644
--- a/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx
+++ b/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx
@@ -15,8 +15,8 @@
%
% \fi
% \iffalse
-\def\myfileversion{2.2}
-\def\myfiledate{2019/06/23}
+\def\myfileversion{2.2.1}
+\def\myfiledate{2019/07/02}
%
%
%<*batchfile>
@@ -52,7 +52,6 @@ version 2005/12/01 or later.
\usepackage{geometry}
\geometry{left=2.8cm,right=2.8cm,top=2.5cm,bottom=2.5cm,papersize={21cm,29.7cm}}
\usepackage{nicematrix}
-\usetikzlibrary{fit}
\NewDocumentEnvironment {scope} {} {} {}
\def\interitem{\vskip 7mm plus 2 mm minus 3mm}
\def\emphase{\bgroup\color{RoyalPurple}\let\next=}
@@ -807,7 +806,8 @@ version 2005/12/01 or later.
% technical reasons, in this preamble, the user must use the letters |L|, |C|
% and~|R|\footnote{The column types |L|, |C| and |R| are defined locally inside
% |{NiceArray}| with |\newcolumntype| of \pkg{array}. This definition overrides
-% an eventual previous definition.} instead of |l|, |c| and |r|. It's possible
+% an eventual previous definition. In fact, the column types |w| and |W| are
+% also redefined.} instead of |l|, |c| and |r|. It's possible
% to use the constructions \verb|w{...}{...}|, \verb|W{...}{...}|, \verb+|+,
% |>{...}|, |<{...}|, |@{...}|, |!{...}| and |*{n}{...}| but the letters |p|,
% |m| and |b| should not be used.\footnote{In a command |\multicolumn|, one
@@ -1081,7 +1081,8 @@ version 2005/12/01 or later.
% 6 & 7 & 8 & 9 & 10 \\
% 11 & 12 & 13 & 14 & 15
% \end{pNiceMatrix}$
-%
+%
+%
% \bigskip
% In the environments with an explicit preamble (like |{NiceArray}|, etc.), it's
% possible to draw a vertical dotted line with the specifier ``|:|''.
@@ -1103,7 +1104,7 @@ version 2005/12/01 or later.
%
% \bigskip
% These dotted lines do \emph{not} extend in the ``first row'' and the ``last column''
-% of the environments with such features.
+% of the environments for the environments with such features (\emph{e.g.} |{pNiceArrayRC}|).
%
% \medskip
% \begin{BVerbatim}[baseline=c,boxwidth=9.5cm]
@@ -2107,7 +2108,7 @@ version 2005/12/01 or later.
%
% \subsection{Technical definitions}
%
-% We test wether the current class is \cls{revtex4-1} or \cls{revtex4-2}.
+% We test whether the current class is \cls{revtex4-1} or \cls{revtex4-2}.
% \begin{macrocode}
\bool_new:N \c_@@_revtex_bool
\@ifclassloaded { revtex4-1 }
@@ -2202,14 +2203,47 @@ version 2005/12/01 or later.
\bool_new:N \l_@@_exterior_column_bool
% \end{macrocode}
%
+% \bigskip
+% Consider the following code :
+% \begin{center}
+% \begin{BVerbatim}
+% \begin{pNiceArrayC}{CC}
+% 1 & 2
+% 3 & 4
+% \end{pNiceArrayC}
+% \end{BVerbatim}
+% \end{center}
+% In such a code, the last column of the environment |{pNiceArrayC}| is not
+% used. We want to be able to detect such a situation. We create a boolean for
+% that job.
+% \begin{macrocode}
+\bool_new:N \g_@@_exterior_column_found_bool
+% \end{macrocode}
+% This boolean will be raised in the last column of environments like |{pNiceArrayC}|.
%
% \bigskip
-% We want to known if we are in a environment |{NiceArray}| because we want to
+% We want to known if we are in an environment |{NiceArray}| because we want to
% raise an error if the user tries to use nested environments |{NiceArray}|.
% \begin{macrocode}
\bool_new:N \l_@@_in_NiceArray_bool
% \end{macrocode}
%
+%
+% \bigskip
+% A list of names of environments of the extension \pkg{nicematrix} which have a
+% preamble as argument. This list is used to parameter some erros messages.
+%
+% \begin{macrocode}
+\seq_new:N \c_@@_env_with_preamble_seq
+\seq_set_from_clist:Nn \c_@@_env_with_preamble_seq
+ {
+ NiceArray , NiceArrayCwithDelims , pNiceArrayC , vNiceArrayC , VNiceArrayC ,
+ bNiceArrayC , BNiceArrayC , NiceArrayRCwithDelims , pNiceArrayRC ,
+ vNiceArrayRC , VNiceArrayRC , bNiceArrayRC , BNiceArrayRC
+ }
+% \end{macrocode}
+%
+%
% \bigskip
% \subsection{The options}
%
@@ -2235,7 +2269,7 @@ version 2005/12/01 or later.
% \end{macrocode}
%
% \bigskip
-% The flag |\l_@@_parallelize_diags_bool| controls wether the diagonals are
+% The flag |\l_@@_parallelize_diags_bool| controls whether the diagonals are
% parallelized. The initial value is~|true|.
% \begin{macrocode}
\bool_new:N \l_@@_parallelize_diags_bool
@@ -2288,7 +2322,7 @@ version 2005/12/01 or later.
% \end{macrocode}
%
% \bigskip
-% The boolean |\l_@@_extra_nodes_bool| will be used to indicate wether the
+% The boolean |\l_@@_extra_nodes_bool| will be used to indicate whether the
% ``medium nodes'' and ``large nodes'' are created in the array.
% \begin{macrocode}
\bool_new:N \l_@@_extra_nodes_bool
@@ -2338,7 +2372,7 @@ version 2005/12/01 or later.
% \end{macrocode}
%
% \bigskip
-% An option to test wether the extra nodes will be created (these nodes are the
+% An option to test whether the extra nodes will be created (these nodes are the
% ``medium nodes'' and ``large nodes''). In some circonstancies, the extra nodes
% are created automatically, for example when a dotted line has an ``open''
% extremity.
@@ -2467,13 +2501,22 @@ version 2005/12/01 or later.
% \end{macrocode}
%
% \bigskip
+% Usually, an error is raised when the user tries to give the same to name two
+% distincts environments of \pkg{nicematrix} (theses names are global and not
+% local to the current TeX scope). However, the option |allow-duplicate-names|
+% disables this feature.
% \begin{macrocode}
allow-duplicate-names .code:n =
- \@@_msg_redirect_name:nn { Duplicate~name } {none} ,
+ \@@_msg_redirect_name:nn { Duplicate~name } { none } ,
allow-duplicate-names .value_forbidden:n = true ,
% \end{macrocode}
%
% \bigskip
+% By default, the specifier used in the preamble of the array (for example in
+% |{pNiceArrayC}| to draw a vertical dotted line between two columns is the
+% colon ``|:|''. However, it's possible to change this letter with
+% |letter-for-dotted-lines| and, by the way, the letter ``|:|'' will remain free
+% for other packages (for example \pkg{arydshln}).
% \begin{macrocode}
letter-for-dotted-lines .tl_set:N = \l_@@_letter_for_dotted_lines_str ,
letter-for-dotted-lines .value_required:n = true ,
@@ -2646,8 +2689,7 @@ version 2005/12/01 or later.
% the |\everycr| because some packages, like \pkg{arydshln}, create special rows
% in the |\halign| that we don't want to take into account.
% \begin{macrocode}
- \int_compare:nNnT \g_@@_column_int = \c_one_int
- { \int_gincr:N \g_@@_row_int }
+ \int_compare:nNnT \g_@@_column_int = 1 { \int_gincr:N \g_@@_row_int }
\int_gset:Nn \g_@@_column_total_int
{ \int_max:nn \g_@@_column_total_int \g_@@_column_int }
\hbox_set:Nw \l_tmpa_box $ % $
@@ -2948,27 +2990,27 @@ version 2005/12/01 or later.
\bool_if:NT \l_@@_auto_columns_width_bool
{
\group_insert_after:N \@@_write_max_cell_width:
- \cs_if_free:cTF { _@@_max_cell_width_ \int_use:N \g_@@_env_int }
- { \dim_set:Nn \l_@@_columns_width_dim \c_zero_dim }
- {
- \dim_set:Nx \l_@@_columns_width_dim
- { \use:c { _@@_max_cell_width _ \int_use:N \g_@@_env_int } }
- }
+ \cs_if_free:cTF { _@@_max_cell_width_ \int_use:N \g_@@_env_int }
+ { \dim_set:Nn \l_@@_columns_width_dim \c_zero_dim }
+ {
+ \dim_set:Nx \l_@@_columns_width_dim
+ { \use:c { _@@_max_cell_width _ \int_use:N \g_@@_env_int } }
+ }
% \end{macrocode}
% If the environment has a name, we read the value of the maximal value of the
% columns from |_@@_name_cell_width|{\ttfamily\slshape name} (the value will be
% the correct value even if the number of the environment has changed (for
% example because the user has created or deleted an environment before the
-% current one).
+% current one)).
% \begin{macrocode}
- \str_if_empty:NF \l_@@_name_str
- {
- \cs_if_free:cF { _@@_max_cell_width_ \l_@@_name_str }
- {
- \dim_set:Nx \l_@@_columns_width_dim
- { \use:c { _@@_max_cell_width_ \l_@@_name_str } }
- }
- }
+ \str_if_empty:NF \l_@@_name_str
+ {
+ \cs_if_free:cF { _@@_max_cell_width_ \l_@@_name_str }
+ {
+ \dim_set:Nx \l_@@_columns_width_dim
+ { \use:c { _@@_max_cell_width_ \l_@@_name_str } }
+ }
+ }
}
% \end{macrocode}
% We don't want to patch any code and that's why some code is executed in a
@@ -3056,19 +3098,38 @@ version 2005/12/01 or later.
{
\skip_horizontal:n { 0.53 pt }
\bool_gset_true:N \g_@@_extra_nodes_bool
- \int_compare:nNnT \g_@@_row_int = 1
+% \end{macrocode}
+%
+% \medskip
+% Consider the following code:
+% \begin{center}
+% \begin{BVerbatim}
+% \begin{NiceArray}{C:CC:C}
+% a & b
+% c & d \\
+% e & f & g & h \\
+% i & j & k & l
+% \end{NiceArray}
+% \end{BVerbatim}
+% \end{center}
+% The first ``|:|'' in the preamble will be encountered during the first row of
+% the environment |{NiceArray}| but the second one will be encountered only in
+% the third row. We have to issue a command |\vdottedline:n| in the |code-after|
+% only one time for each ``|:|'' in the preamble. That's why we keep a counter
+% |\g_@@_last_vdotted_col_int| and with this counter, we know whether a letter
+% ``|:|'' encountered during the parsing has already been taken into account in
+% the |code-after|.
+% \begin{macrocode}
+ \int_compare:nNnT \g_@@_column_int > \g_@@_last_vdotted_col_int
{
- \int_compare:nNnTF \g_@@_column_int = \c_zero_dim
- { \@@_error:n { Use~of~:~in~first~position } }
+ \int_gset_eq:NN \g_@@_last_vdotted_col_int \g_@@_column_int
+ \tl_gput_right:Nx \g_@@_code_after_tl
{
- \tl_gput_right:Nx \g_@@_code_after_tl
- {
- \exp_not:N \@@_vdottedline:n
- \exp_not:N {
- \int_use:N \g_@@_column_int
- \exp_not:N }
- }
- }
+ \exp_not:N \@@_vdottedline:n
+ \exp_not:N {
+ \int_use:N \g_@@_column_int
+ \exp_not:N }
+ }
}
}
}
@@ -3125,6 +3186,11 @@ version 2005/12/01 or later.
% \begin{macrocode}
\int_gzero_new:N \g_@@_column_int
\int_gzero_new:N \g_@@_column_total_int
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \int_gzero_new:N \g_@@_last_vdotted_col_int
+ \int_gset:Nn \g_@@_last_vdotted_col_int { -1 }
\cs_set_eq:NN \@ifnextchar \new@ifnextchar
% \end{macrocode}
%
@@ -3245,14 +3311,14 @@ version 2005/12/01 or later.
% \end{macrocode}
%
% \interitem
-% The conditionnal |\@@_if_not_empty_cell:nnT| tests wether a cell is empty. The
+% The conditionnal |\@@_if_not_empty_cell:nnT| tests whether a cell is empty. The
% first two arguments must be LaTeX3 counters for the row and the column of the
% considered cell.
% \begin{macrocode}
\prg_set_conditional:Npnn \@@_if_not_empty_cell:nn #1 #2 { T , TF }
% \end{macrocode}
% If the cell is an implicit cell (that is after the symbol |\\| of end of row),
-% the cell must, of course, be considered as empty. It's easy to check wether we
+% the cell must, of course, be considered as empty. It's easy to check whether we
% are in this situation considering the correspondant Tikz node.
% \begin{macrocode}
{
@@ -3342,11 +3408,30 @@ version 2005/12/01 or later.
%
% \subsection{After the construction of the array}
%
-% First, we deactivate Tikz externalization (since we use Tikz pictures with the
-% options |overlay| and |remember picture|, there would be errors).
% \begin{macrocode}
\cs_new_protected:Nn \@@_after_array:
{
+ \int_compare:nNnTF \g_@@_row_int > 0
+ \@@_after_array_i:
+ { \@@_error:n { Zero~row } }
+ }
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@@_msg_new:nn { Zero~row }
+ {
+ There~is~a~problem.~Maybe~your~environment~is~empty.~Maybe~you~have~used~L,~
+ ~C~and~R~instead~of~l,~c~and~r~in~the~preamble~of~your~environment.\\
+ If~you~go~on,~the~result~may~be~incorrect.
+ }
+% \end{macrocode}
+%
+% \medskip
+% We deactivate Tikz externalization (since we use Tikz pictures with the
+% options |overlay| and |remember picture|, there would be errors).
+% \begin{macrocode}
+\cs_new_protected:Nn \@@_after_array_i:
+ {
\group_begin:
\cs_if_exist:NT \tikz@library@external@loaded
{ \tikzset { external / export = false } }
@@ -3358,7 +3443,8 @@ version 2005/12/01 or later.
% column.
% \begin{macrocode}
\int_gset_eq:NN \g_@@_column_int \g_@@_column_total_int
- \bool_if:NT \l_@@_exterior_column_bool { \int_gdecr:N \g_@@_column_int }
+ \bool_if:nT { \l_@@_exterior_column_bool && \g_@@_exterior_column_found_bool }
+ { \int_gdecr:N \g_@@_column_int }
% \end{macrocode}
%
% The sequence |\g_@@_yet_drawn_seq| contains a list of lines which have been
@@ -3371,7 +3457,7 @@ version 2005/12/01 or later.
% By default, the diagonal lines will be parallelized\footnote{It's possible to
% use the option |parallelize-diags| to disable this parallelization.}. There
% are two types of diagonals lines: the $|\Ddots|$ diagonals and the |\Iddots|
-% diagonals. We have to count both types in order to know wether a diagonal is
+% diagonals. We have to count both types in order to know whether a diagonal is
% the first of its type in the current |{NiceArray}| environment.
% \begin{macrocode}
\bool_if:NT \l_@@_parallelize_diags_bool
@@ -3481,7 +3567,7 @@ version 2005/12/01 or later.
% coordinates of one extremity of the line;
% \item |\l_@@_final_i_int| and |\l_@@_final_j_int| which are the coordinates of
% the other extremity of the line;
-% \item |\l_@@_initial_open_bool| and |\l_@@_final_open_bool| to indicate wether
+% \item |\l_@@_initial_open_bool| and |\l_@@_final_open_bool| to indicate whether
% the extremities are open or not.
% \end{itemize}
%
@@ -3643,13 +3729,13 @@ version 2005/12/01 or later.
\dim_gzero_new:N \g_@@_x_final_dim
\dim_gzero_new:N \g_@@_y_final_dim
\begin { tikzpicture } [ remember~picture ]
- \tikz@parse@node\pgfutil@firstofone
+ \tikz@parse@node \pgfutil@firstofone
( nm - \int_use:N \g_@@_env_int -
\int_use:N \l_@@_initial_i_int -
\int_use:N \l_@@_initial_j_int #1 )
\dim_gset:Nn \g_@@_x_initial_dim \pgf@x
\dim_gset:Nn \g_@@_y_initial_dim \pgf@y
- \tikz@parse@node\pgfutil@firstofone
+ \tikz@parse@node \pgfutil@firstofone
( nm - \int_use:N \g_@@_env_int -
\int_use:N \l_@@_final_i_int -
\int_use:N \l_@@_final_j_int #2 )
@@ -3751,7 +3837,7 @@ version 2005/12/01 or later.
{ .north~west }
}
% \end{macrocode}
-% The boolean |\l_tmpa_bool| indicates wether the column is of type |l| (|L| of
+% The boolean |\l_tmpa_bool| indicates whether the column is of type |l| (|L| of
% |{NiceArray}|) or may be considered as if.
% \begin{macrocode}
\bool_set:Nn \l_tmpa_bool
@@ -3768,7 +3854,7 @@ version 2005/12/01 or later.
{ .north }
}
% \end{macrocode}
-% The boolean |\l_tmpb_bool| indicates wether the column is of type |c| (|C| of
+% The boolean |\l_tmpb_bool| indicates whether the column is of type |c| (|C| of
% |{NiceArray}|) or may be considered as if.
% \begin{macrocode}
\bool_set:Nn \l_tmpb_bool
@@ -4243,74 +4329,73 @@ version 2005/12/01 or later.
% \bigskip
% \subsection{The commands to draw dotted lines to separate columns and rows}
%
-% The command |\hdottedline| draws a horizontal dotted line to separate two
+% The command |\hdottedline| draws an horizontal dotted line to separate two
% rows. Similarly, the letter ``:'' in the preamble draws a vertical dotted line
% (the letter can be changed with the option |letter-for-dotted-lines|). Both
% mechanisms write instructions in the |code-after|. The actual instructions in
% the |code-after| use the commands |\@@_hdottedline:n| and |\@@_vdottedline:n|.
%
% \bigskip
-%
-% The following command must \emph{not} be protected because it starts with |\noalign|.
+% We want the horizontal lines at the same position\footnote{In fact, almost the
+% same position because of the width of the line: the width of a dotted line is
+% not the same as the width of a line created by |\hline|.} as the line created
+% by |\hline| (or |\hdashline| of \pkg{arydshln}). To this end, we construct a
+% ``false row'' and, in this row, we create a Tikz node (|\coordinate|) that
+% will be used to have the $y$-value of the line.
+%
% \begin{macrocode}
-\cs_new:Nn \@@_hdottedline:
- {
- \noalign { \skip_vertical:n { 0.53 pt } }
- \@@_hdottedline_i:
- }
+\cs_generate_variant:Nn \dim_set:Nn { N v }
% \end{macrocode}
%
+% \medskip
+% The command |\@@_hdottedline:| (which is linked to |\hdottedline| in the
+% environment |{NiceArray}|) begins with a |\noalign| which contains a
+% vertical skip which is part of the construction of the ``false row''.
+%
+% \medskip
+% Some extension, like the extension \pkg{doc} do a redefinition of the command
+% |\dotfill| of LaTeX. That's why we define a command |\@@_dotfill:| as we wish.
% \begin{macrocode}
-\cs_new_protected:Nn \@@_hdottedline_i:
- {
- \int_compare:nNnTF \g_@@_row_int < 2
- { \@@_error:n { Use~of~hdottedline~in~first~position } }
- {
+\cs_set:Npn \@@_dotfill:
+ { \cleaders \hbox_to_wd:nn {.44em} {\hss .\hss } \hfill \kern \c_zero_dim }
+% \end{macrocode}
+%
+
+% This command must \emph{not} be protected because it starts with |\noalign|.
+% \begin{macrocode}
+\cs_new:Nn \@@_hdottedline:
+ {
+ \noalign
+ {
\bool_gset_true:N \g_@@_extra_nodes_bool
- \bool_if:NF \c_@@_draft_bool
- {
- \tl_gput_right:Nx \g_@@_code_after_tl
+ \cs_if_exist:cTF { @@_width_ \int_use:N \g_@@_env_int }
+ { \dim_set:Nv \l_tmpa_dim { @@_width_ \int_use:N \g_@@_env_int } }
+ { \dim_set:Nn \l_tmpa_dim { 5 mm } }
+ \hbox_overlap_right:n
+ { \hbox_to_wd:nn
{
- \exp_not:N \@@_hdottedline:n
- \exp_not:N {
- \int_eval:n { \g_@@_row_int - 1 }
- \exp_not:N }
+ \l_tmpa_dim + 2 \arraycolsep
+ - \l_@@_left_margin_dim - \g_@@_right_margin_dim
}
- }
- }
- }
-% \end{macrocode}
-%
-% The argument of |\@@_hdottedline:n| is the number of the row \emph{after} which
-% we have to draw a dotted line.
-% \begin{macrocode}
-\cs_new_protected:Nn \@@_hdottedline:n
- {
- \@@_create_extra_nodes:
- \dim_zero_new:N \g_@@_x_initial_dim
- \dim_zero_new:N \g_@@_y_initial_dim
- \dim_zero_new:N \g_@@_x_final_dim
- \dim_zero_new:N \g_@@_y_final_dim
- \bool_set_true:N \l_@@_initial_open_bool
- \bool_set_true:N \l_@@_final_open_bool
- \begin { tikzpicture } [ remember~picture ]
- \tikz@parse@node\pgfutil@firstofone
- ( #1 - 1 -large .south~west )
- \dim_gset:Nn \g_@@_x_initial_dim \pgf@x
- \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
- \tikz@parse@node\pgfutil@firstofone
- ( #1 - \int_use:N \g_@@_column_int -large .south~east )
- \dim_gset:Nn \g_@@_x_final_dim \pgf@x
- \dim_gset:Nn \g_@@_y_final_dim \pgf@y
- \end { tikzpicture }
- \@@_draw_tikz_line:
+ \@@_dotfill:
+ }
+ }
}
% \end{macrocode}
%
+%
+%
% \begin{macrocode}
\@@_msg_new:nn { Use~of~hdottedline~in~first~position }
{
You~can't~use~the~command~\token_to_str:N\hdottedline\ in~the~first~row~
+ of~the~environment~\{\@currenvir\}.~But~maybe~you~have~used~l,~c~and~r~
+ instead~of~L,~C,~R~in~the~preamble~of~the~array.\\
+ If~you~go~on,~this~dotted~line~will~be~ignored.
+ }
+\@@_msg_new:nn { Use~of~hdottedline~in~first~position~bis }
+ {
+ You~can't~use~the~command~\token_to_str:N\hdottedline\ in~the~first~row~
of~the~environment~\{\@currenvir\}. \\
If~you~go~on,~this~dotted~line~will~be~ignored.
}
@@ -4322,8 +4407,8 @@ version 2005/12/01 or later.
\cs_new_protected:Nn \@@_vdottedline:n
{
% \end{macrocode}
-% The following test is a security: normally, the error should have been capted
-% before.
+% We should allow the letter ``|:|'' in the first position of the preamble
+% but that would need a special programmation.
% \begin{macrocode}
\int_compare:nNnTF #1 = \c_zero_int
{ \@@_error:n { Use~of~:~in~first~position } }
@@ -4338,39 +4423,42 @@ version 2005/12/01 or later.
\bool_set_true:N \l_@@_initial_open_bool
\bool_set_true:N \l_@@_final_open_bool
% \end{macrocode}
-% If the |w|-nodes are created in the previous column (that is if the previous
-% column was constructed explicitly of implicitly with a letter |w|), we use
-% that column in order to have the dotted lines perfectly aligned when we use
-% the environment |{NiceMatrixBlock}| with the option |auto-columns-width|.
-% \begin{macrocode}
- \cs_if_exist:cTF
+% In order to have the coordinates of the line to draw, we use the ``large nodes''.
+% \begin{macrocode}
+ \begin { tikzpicture } [ remember~picture ]
+ \tikz@parse@node\pgfutil@firstofone
+ ( 1 - #1 - large .north~east )
+ \dim_gset:Nn \g_@@_x_initial_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
+ \tikz@parse@node\pgfutil@firstofone
+ ( \int_use:N \g_@@_row_int - #1 - large .south~east )
+ \dim_gset:Nn \g_@@_x_final_dim \pgf@x
+ \dim_gset:Nn \g_@@_y_final_dim \pgf@y
+ \end { tikzpicture }
+% \end{macrocode}
+% However, if the |w|-nodes are created in the previous column (that is if the
+% previous column was constructed explicitly or implicitly\footnote{A column is
+% constructed implicitly with the letter |w| if the option |columns-width| is
+% used or if the environment |{NiceMatrixBlock}| is used with the option
+% |auto-columns-width|.} with a letter |w|), we use the |w|-nodes to change the
+% $x$-value of the nodes in order to have the dotted lines perfectly aligned
+% when we use the environment |{NiceMatrixBlock}| with the option
+% |auto-columns-width|.
+% \begin{macrocode}
+ \cs_if_exist:cT
{ pgf@sh@ns@nm -\int_use:N \g_@@_env_int - 1 - #1 - w }
{
\begin { tikzpicture } [ remember~picture ]
\tikz@parse@node\pgfutil@firstofone
( 1 - #1 - w .north~east )
\dim_gset:Nn \g_@@_x_initial_dim \pgf@x
- \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
\tikz@parse@node\pgfutil@firstofone
( \int_use:N \g_@@_row_int - #1 - w .south~east )
\dim_gset:Nn \g_@@_x_final_dim \pgf@x
- \dim_gset:Nn \g_@@_y_final_dim \pgf@y
\end { tikzpicture }
\dim_gadd:Nn \g_@@_x_initial_dim \arraycolsep
\dim_gadd:Nn \g_@@_x_final_dim \arraycolsep
}
- {
- \begin { tikzpicture } [ remember~picture ]
- \tikz@parse@node\pgfutil@firstofone
- ( 1 - #1 - large .north~east )
- \dim_gset:Nn \g_@@_x_initial_dim \pgf@x
- \dim_gset:Nn \g_@@_y_initial_dim \pgf@y
- \tikz@parse@node\pgfutil@firstofone
- ( \int_use:N \g_@@_row_int - #1 - large .south~east )
- \dim_gset:Nn \g_@@_x_final_dim \pgf@x
- \dim_gset:Nn \g_@@_y_final_dim \pgf@y
- \end { tikzpicture }
- }
\@@_draw_tikz_line:
}
}
@@ -4502,6 +4590,7 @@ version 2005/12/01 or later.
\cs_new_protected:Nn \@@_NiceArrayC:n
{
\bool_set_true:N \l_@@_exterior_column_bool
+ \bool_gset_false:N \g_@@_exterior_column_found_bool
\begin { NiceArray }
% \end{macrocode}
% The beginning of the preamble is the argument of the environment
@@ -4517,6 +4606,7 @@ version 2005/12/01 or later.
% \begin{macrocode}
>
{
+ \bool_gset_true:N \g_@@_exterior_column_found_bool
\int_gincr:N \g_@@_column_int
\int_gset:Nn \g_@@_column_total_int
{ \int_max:nn \g_@@_column_total_int \g_@@_column_int }
@@ -4526,7 +4616,7 @@ version 2005/12/01 or later.
l
% \end{macrocode}
%
-% We actualize the value of |\g_@@_with_last_col_dim| which, at the end of the
+% We actualize the value of |\g_@@_width_last_col_dim| which, at the end of the
% array, will contain the maximal width of the cells of the last column (thus,
% it will be equal to the width of the last column).
% \begin{macrocode}
@@ -4803,7 +4893,7 @@ version 2005/12/01 or later.
\dim_zero_new:c { l_@@_row_\@@_i _max_dim }
\dim_set:cn { l_@@_row_\@@_i _max_dim } { - \c_max_dim }
}
- \int_step_variable:nnnNn 1 1 \g_@@_column_total_int \@@_j
+ \int_step_variable:nNn \g_@@_column_total_int \@@_j
{
\dim_zero_new:c { l_@@_column_\@@_j _min_dim }
\dim_set_eq:cN { l_@@_column_\@@_j _min_dim } \c_max_dim
@@ -4842,8 +4932,8 @@ version 2005/12/01 or later.
% We retrieve the coordinates of the anchor |north east| of the (normal) node of
% the cell ($i$-$j$). They will be stored in |\pgf@x| and |\pgf@y|.
% \begin{macrocode}
- \tikz@parse@node \pgfutil@firstofone
- ( nm - \int_use:N \g_@@_env_int - \@@_i - \@@_j .north~east )
+ \tikz@parse@node \pgfutil@firstofone
+ ( nm - \int_use:N \g_@@_env_int - \@@_i - \@@_j .north~east )
\dim_set:cn { l_@@_row _ \@@_i _ max_dim }
{ \dim_max:vn { l_@@_row _ \@@_i _ max_dim } \pgf@y }
\seq_if_in:NxF \g_@@_multicolumn_cells_seq { \@@_i - \@@_j }
@@ -4879,7 +4969,7 @@ version 2005/12/01 or later.
% \texttt{l_@@_column_\textsl{j}_min_dim} and
% \texttt{l_@@_column_\textsl{j}_max_dim}.
% \begin{macrocode}
- \int_step_variable:nnnNn 1 1 { \g_@@_row_int - 1 } \@@_i
+ \int_step_variable:nNn { \g_@@_row_int - 1 } \@@_i
{
\dim_set:cn { l_@@_row _ \@@_i _ min _ dim }
{
@@ -4892,7 +4982,7 @@ version 2005/12/01 or later.
\dim_set_eq:cc { l_@@_row _ \int_eval:n { \@@_i + 1 } _ max _ dim }
{ l_@@_row_\@@_i _min_dim }
}
- \int_step_variable:nnnNn 1 1 { \g_@@_column_int - 1 } \@@_j
+ \int_step_variable:nNn { \g_@@_column_int - 1 } \@@_j
{
\dim_set:cn { l_@@_column _ \@@_j _ max _ dim }
{
@@ -4926,6 +5016,27 @@ version 2005/12/01 or later.
% the current TeX group). That's why we put a nullification of the command.
% \begin{macrocode}
\cs_set:Nn \@@_create_extra_nodes: { }
+% \end{macrocode}
+%
+% \medskip
+% We can now compute the width of the array (used by |\hdottedline|).
+% \begin{macrocode}
+ \begin { tikzpicture } [ remember~picture , overlay ]
+ \tikz@parse@node \pgfutil@firstofone
+ ( nm - \int_use:N \g_@@_env_int - 1 - 1 - large .north~west )
+ \dim_gset:Nn \g_tmpa_dim \pgf@x
+ \tikz@parse@node \pgfutil@firstofone
+ ( nm - \int_use:N \g_@@_env_int - 1 -
+ \int_use:N \g_@@_column_int - large .north~east )
+ \dim_gset:Nn \g_tmpb_dim \pgf@x
+ \end { tikzpicture }
+ \iow_now:Nn \@mainaux \ExplSyntaxOn
+ \iow_now:Nx \@mainaux
+ {
+ \cs_gset:cpn { @@_width_ \int_use:N \g_@@_env_int }
+ { \dim_eval:n { \g_tmpb_dim - \g_tmpa_dim } }
+ }
+ \iow_now:Nn \@mainaux \ExplSyntaxOff
}
% \end{macrocode}
%
@@ -5061,7 +5172,7 @@ version 2005/12/01 or later.
% \end{macrocode}
% In the group, we can use |\seq_pop:NN| safely.
% \begin{macrocode}
- \int_step_inline:nnnn 1 1 { \seq_count:N #1 }
+ \int_step_inline:nn { \seq_count:N #1 }
{
\seq_pop:NN #1 \l_tmpa_tl
\seq_pop:NN #2 \l_tmpb_tl
@@ -5201,6 +5312,13 @@ version 2005/12/01 or later.
% specifier ``|:|'' in the preamble (similar to the classical specifier
% ``\verb+|+'' and the specifier ``|:|'' of \pkg{arydshln}).
%
+% \subsection{Changes between version 2.2 and 2.2.1}
+%
+% Improvment of the vertical dotted lines drawn by the specifier ``:'' in the
+% preamble.
+%
+% Modification of the position of the dotted lines drawn by |\hdottedline|.
+%
% \endinput
% Local Variables:
% TeX-fold-mode: nil
diff --git a/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty b/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty
index 20432043d69..86dc6b39765 100644
--- a/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty
+++ b/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty
@@ -18,8 +18,8 @@
%% and version 1.3 or later is part of all distributions of
%% LaTeX version 2005/12/01 or later.
%%
-\def\myfileversion{2.2}
-\def\myfiledate{2019/06/23}
+\def\myfileversion{2.2.1}
+\def\myfiledate{2019/07/02}
\RequirePackage{tikz}
\usetikzlibrary{fit}
\RequirePackage{expl3}[2019/02/15]
@@ -66,7 +66,15 @@
\int_new:N \l__nm_nb_first_row_int
\int_set:Nn \l__nm_nb_first_row_int 1
\bool_new:N \l__nm_exterior_column_bool
+\bool_new:N \g__nm_exterior_column_found_bool
\bool_new:N \l__nm_in_NiceArray_bool
+\seq_new:N \c__nm_env_with_preamble_seq
+\seq_set_from_clist:Nn \c__nm_env_with_preamble_seq
+ {
+ NiceArray , NiceArrayCwithDelims , pNiceArrayC , vNiceArrayC , VNiceArrayC ,
+ bNiceArrayC , BNiceArrayC , NiceArrayRCwithDelims , pNiceArrayRC ,
+ vNiceArrayRC , VNiceArrayRC , bNiceArrayRC , BNiceArrayRC
+ }
\str_new:N \l__nm_pos_env_str
\str_set:Nn \l__nm_pos_env_str c
\bool_new:N \l__nm_exterior_arraycolsep_bool
@@ -163,7 +171,7 @@
{ \__nm_error:n { Option~auto~for~columns-width } }
{ \dim_set:Nn \l__nm_columns_width_dim { #1 } } ,
allow-duplicate-names .code:n =
- \__nm_msg_redirect_name:nn { Duplicate~name } {none} ,
+ \__nm_msg_redirect_name:nn { Duplicate~name } { none } ,
allow-duplicate-names .value_forbidden:n = true ,
letter-for-dotted-lines .tl_set:N = \l__nm_letter_for_dotted_lines_str ,
letter-for-dotted-lines .value_required:n = true ,
@@ -268,8 +276,7 @@
\cs_new_protected:Nn \__nm_Cell:
{
\int_gincr:N \g__nm_column_int
- \int_compare:nNnT \g__nm_column_int = \c_one_int
- { \int_gincr:N \g__nm_row_int }
+ \int_compare:nNnT \g__nm_column_int = 1 { \int_gincr:N \g__nm_row_int }
\int_gset:Nn \g__nm_column_total_int
{ \int_max:nn \g__nm_column_total_int \g__nm_column_int }
\hbox_set:Nw \l_tmpa_box $ % $
@@ -446,20 +453,20 @@
\bool_if:NT \l__nm_auto_columns_width_bool
{
\group_insert_after:N \__nm_write_max_cell_width:
- \cs_if_free:cTF { __nm_max_cell_width_ \int_use:N \g__nm_env_int }
- { \dim_set:Nn \l__nm_columns_width_dim \c_zero_dim }
- {
- \dim_set:Nx \l__nm_columns_width_dim
- { \use:c { __nm_max_cell_width _ \int_use:N \g__nm_env_int } }
- }
- \str_if_empty:NF \l__nm_name_str
- {
- \cs_if_free:cF { __nm_max_cell_width_ \l__nm_name_str }
- {
- \dim_set:Nx \l__nm_columns_width_dim
- { \use:c { __nm_max_cell_width_ \l__nm_name_str } }
- }
- }
+ \cs_if_free:cTF { __nm_max_cell_width_ \int_use:N \g__nm_env_int }
+ { \dim_set:Nn \l__nm_columns_width_dim \c_zero_dim }
+ {
+ \dim_set:Nx \l__nm_columns_width_dim
+ { \use:c { __nm_max_cell_width _ \int_use:N \g__nm_env_int } }
+ }
+ \str_if_empty:NF \l__nm_name_str
+ {
+ \cs_if_free:cF { __nm_max_cell_width_ \l__nm_name_str }
+ {
+ \dim_set:Nx \l__nm_columns_width_dim
+ { \use:c { __nm_max_cell_width_ \l__nm_name_str } }
+ }
+ }
}
\bool_gset_eq:NN \g__nm_extra_nodes_bool \l__nm_extra_nodes_bool
\dim_gset_eq:NN \g__nm_left_margin_dim \l__nm_left_margin_dim
@@ -499,18 +506,15 @@
{
\skip_horizontal:n { 0.53 pt }
\bool_gset_true:N \g__nm_extra_nodes_bool
- \int_compare:nNnT \g__nm_row_int = 1
+ \int_compare:nNnT \g__nm_column_int > \g__nm_last_vdotted_col_int
{
- \int_compare:nNnTF \g__nm_column_int = \c_zero_dim
- { \__nm_error:n { Use~of~:~in~first~position } }
+ \int_gset_eq:NN \g__nm_last_vdotted_col_int \g__nm_column_int
+ \tl_gput_right:Nx \g__nm_code_after_tl
{
- \tl_gput_right:Nx \g__nm_code_after_tl
- {
- \exp_not:N \__nm_vdottedline:n
- \exp_not:N {
- \int_use:N \g__nm_column_int
- \exp_not:N }
- }
+ \exp_not:N \__nm_vdottedline:n
+ \exp_not:N {
+ \int_use:N \g__nm_column_int
+ \exp_not:N }
}
}
}
@@ -529,6 +533,8 @@
\int_gset:Nn \g__nm_row_int { \l__nm_nb_first_row_int - 1 }
\int_gzero_new:N \g__nm_column_int
\int_gzero_new:N \g__nm_column_total_int
+ \int_gzero_new:N \g__nm_last_vdotted_col_int
+ \int_gset:Nn \g__nm_last_vdotted_col_int { -1 }
\cs_set_eq:NN \@ifnextchar \new@ifnextchar
\bool_if:NF \l__nm_exterior_arraycolsep_bool
{ \skip_horizontal:n { - \arraycolsep } }
@@ -618,11 +624,24 @@
}
\cs_new_protected:Nn \__nm_after_array:
{
+ \int_compare:nNnTF \g__nm_row_int > 0
+ \__nm_after_array_i:
+ { \__nm_error:n { Zero~row } }
+ }
+\__nm_msg_new:nn { Zero~row }
+ {
+ There~is~a~problem.~Maybe~your~environment~is~empty.~Maybe~you~have~used~L,~
+ ~C~and~R~instead~of~l,~c~and~r~in~the~preamble~of~your~environment.\\
+ If~you~go~on,~the~result~may~be~incorrect.
+ }
+\cs_new_protected:Nn \__nm_after_array_i:
+ {
\group_begin:
\cs_if_exist:NT \tikz@library@external@loaded
{ \tikzset { external / export = false } }
\int_gset_eq:NN \g__nm_column_int \g__nm_column_total_int
- \bool_if:NT \l__nm_exterior_column_bool { \int_gdecr:N \g__nm_column_int }
+ \bool_if:nT { \l__nm_exterior_column_bool && \g__nm_exterior_column_found_bool }
+ { \int_gdecr:N \g__nm_column_int }
\seq_gclear_new:N \g__nm_yet_drawn_seq
\bool_if:NT \l__nm_parallelize_diags_bool
{
@@ -746,13 +765,13 @@
\dim_gzero_new:N \g__nm_x_final_dim
\dim_gzero_new:N \g__nm_y_final_dim
\begin { tikzpicture } [ remember~picture ]
- \tikz@parse@node\pgfutil@firstofone
+ \tikz@parse@node \pgfutil@firstofone
( nm - \int_use:N \g__nm_env_int -
\int_use:N \l__nm_initial_i_int -
\int_use:N \l__nm_initial_j_int #1 )
\dim_gset:Nn \g__nm_x_initial_dim \pgf@x
\dim_gset:Nn \g__nm_y_initial_dim \pgf@y
- \tikz@parse@node\pgfutil@firstofone
+ \tikz@parse@node \pgfutil@firstofone
( nm - \int_use:N \g__nm_env_int -
\int_use:N \l__nm_final_i_int -
\int_use:N \l__nm_final_j_int #2 )
@@ -1139,51 +1158,36 @@
\end { tikzpicture }
\__nm_draw_tikz_line:
}
+\cs_generate_variant:Nn \dim_set:Nn { N v }
+\cs_set:Npn \__nm_dotfill:
+ { \cleaders \hbox_to_wd:nn {.44em} {\hss .\hss } \hfill \kern \c_zero_dim }
+
\cs_new:Nn \__nm_hdottedline:
{
- \noalign { \skip_vertical:n { 0.53 pt } }
- \__nm_hdottedline_i:
- }
-\cs_new_protected:Nn \__nm_hdottedline_i:
- {
- \int_compare:nNnTF \g__nm_row_int < 2
- { \__nm_error:n { Use~of~hdottedline~in~first~position } }
+ \noalign
{
\bool_gset_true:N \g__nm_extra_nodes_bool
- \bool_if:NF \c__nm_draft_bool
- {
- \tl_gput_right:Nx \g__nm_code_after_tl
+ \cs_if_exist:cTF { __nm_width_ \int_use:N \g__nm_env_int }
+ { \dim_set:Nv \l_tmpa_dim { __nm_width_ \int_use:N \g__nm_env_int } }
+ { \dim_set:Nn \l_tmpa_dim { 5 mm } }
+ \hbox_overlap_right:n
+ { \hbox_to_wd:nn
{
- \exp_not:N \__nm_hdottedline:n
- \exp_not:N {
- \int_eval:n { \g__nm_row_int - 1 }
- \exp_not:N }
+ \l_tmpa_dim + 2 \arraycolsep
+ - \l__nm_left_margin_dim - \g__nm_right_margin_dim
}
+ \__nm_dotfill:
}
}
}
-\cs_new_protected:Nn \__nm_hdottedline:n
+\__nm_msg_new:nn { Use~of~hdottedline~in~first~position }
{
- \__nm_create_extra_nodes:
- \dim_zero_new:N \g__nm_x_initial_dim
- \dim_zero_new:N \g__nm_y_initial_dim
- \dim_zero_new:N \g__nm_x_final_dim
- \dim_zero_new:N \g__nm_y_final_dim
- \bool_set_true:N \l__nm_initial_open_bool
- \bool_set_true:N \l__nm_final_open_bool
- \begin { tikzpicture } [ remember~picture ]
- \tikz@parse@node\pgfutil@firstofone
- ( #1 - 1 -large .south~west )
- \dim_gset:Nn \g__nm_x_initial_dim \pgf@x
- \dim_gset:Nn \g__nm_y_initial_dim \pgf@y
- \tikz@parse@node\pgfutil@firstofone
- ( #1 - \int_use:N \g__nm_column_int -large .south~east )
- \dim_gset:Nn \g__nm_x_final_dim \pgf@x
- \dim_gset:Nn \g__nm_y_final_dim \pgf@y
- \end { tikzpicture }
- \__nm_draw_tikz_line:
+ You~can't~use~the~command~\token_to_str:N\hdottedline\ in~the~first~row~
+ of~the~environment~\{\@currenvir\}.~But~maybe~you~have~used~l,~c~and~r~
+ instead~of~L,~C,~R~in~the~preamble~of~the~array.\\
+ If~you~go~on,~this~dotted~line~will~be~ignored.
}
-\__nm_msg_new:nn { Use~of~hdottedline~in~first~position }
+\__nm_msg_new:nn { Use~of~hdottedline~in~first~position~bis }
{
You~can't~use~the~command~\token_to_str:N\hdottedline\ in~the~first~row~
of~the~environment~\{\@currenvir\}. \\
@@ -1203,34 +1207,30 @@
\dim_zero_new:N \g__nm_y_final_dim
\bool_set_true:N \l__nm_initial_open_bool
\bool_set_true:N \l__nm_final_open_bool
- \cs_if_exist:cTF
+ \begin { tikzpicture } [ remember~picture ]
+ \tikz@parse@node\pgfutil@firstofone
+ ( 1 - #1 - large .north~east )
+ \dim_gset:Nn \g__nm_x_initial_dim \pgf@x
+ \dim_gset:Nn \g__nm_y_initial_dim \pgf@y
+ \tikz@parse@node\pgfutil@firstofone
+ ( \int_use:N \g__nm_row_int - #1 - large .south~east )
+ \dim_gset:Nn \g__nm_x_final_dim \pgf@x
+ \dim_gset:Nn \g__nm_y_final_dim \pgf@y
+ \end { tikzpicture }
+ \cs_if_exist:cT
{ pgf@sh@ns@nm -\int_use:N \g__nm_env_int - 1 - #1 - w }
{
\begin { tikzpicture } [ remember~picture ]
\tikz@parse@node\pgfutil@firstofone
( 1 - #1 - w .north~east )
\dim_gset:Nn \g__nm_x_initial_dim \pgf@x
- \dim_gset:Nn \g__nm_y_initial_dim \pgf@y
\tikz@parse@node\pgfutil@firstofone
( \int_use:N \g__nm_row_int - #1 - w .south~east )
\dim_gset:Nn \g__nm_x_final_dim \pgf@x
- \dim_gset:Nn \g__nm_y_final_dim \pgf@y
\end { tikzpicture }
\dim_gadd:Nn \g__nm_x_initial_dim \arraycolsep
\dim_gadd:Nn \g__nm_x_final_dim \arraycolsep
}
- {
- \begin { tikzpicture } [ remember~picture ]
- \tikz@parse@node\pgfutil@firstofone
- ( 1 - #1 - large .north~east )
- \dim_gset:Nn \g__nm_x_initial_dim \pgf@x
- \dim_gset:Nn \g__nm_y_initial_dim \pgf@y
- \tikz@parse@node\pgfutil@firstofone
- ( \int_use:N \g__nm_row_int - #1 - large .south~east )
- \dim_gset:Nn \g__nm_x_final_dim \pgf@x
- \dim_gset:Nn \g__nm_y_final_dim \pgf@y
- \end { tikzpicture }
- }
\__nm_draw_tikz_line:
}
}
@@ -1303,10 +1303,12 @@
\cs_new_protected:Nn \__nm_NiceArrayC:n
{
\bool_set_true:N \l__nm_exterior_column_bool
+ \bool_gset_false:N \g__nm_exterior_column_found_bool
\begin { NiceArray }
{ #1
>
{
+ \bool_gset_true:N \g__nm_exterior_column_found_bool
\int_gincr:N \g__nm_column_int
\int_gset:Nn \g__nm_column_total_int
{ \int_max:nn \g__nm_column_total_int \g__nm_column_int }
@@ -1487,7 +1489,7 @@
\dim_zero_new:c { l__nm_row_\__nm_i _max_dim }
\dim_set:cn { l__nm_row_\__nm_i _max_dim } { - \c_max_dim }
}
- \int_step_variable:nnnNn 1 1 \g__nm_column_total_int \__nm_j
+ \int_step_variable:nNn \g__nm_column_total_int \__nm_j
{
\dim_zero_new:c { l__nm_column_\__nm_j _min_dim }
\dim_set_eq:cN { l__nm_column_\__nm_j _min_dim } \c_max_dim
@@ -1510,8 +1512,8 @@
\dim_set:cn { l__nm_column _ \__nm_j _ min_dim}
{ \dim_min:vn { l__nm_column _ \__nm_j _min_dim } \pgf@x }
}
- \tikz@parse@node \pgfutil@firstofone
- ( nm - \int_use:N \g__nm_env_int - \__nm_i - \__nm_j .north~east )
+ \tikz@parse@node \pgfutil@firstofone
+ ( nm - \int_use:N \g__nm_env_int - \__nm_i - \__nm_j .north~east )
\dim_set:cn { l__nm_row _ \__nm_i _ max_dim }
{ \dim_max:vn { l__nm_row _ \__nm_i _ max_dim } \pgf@y }
\seq_if_in:NxF \g__nm_multicolumn_cells_seq { \__nm_i - \__nm_j }
@@ -1525,7 +1527,7 @@
\tikzset { name~suffix = -medium }
\__nm_create_nodes:
\int_set:Nn \l__nm_nb_first_row_int 1
- \int_step_variable:nnnNn 1 1 { \g__nm_row_int - 1 } \__nm_i
+ \int_step_variable:nNn { \g__nm_row_int - 1 } \__nm_i
{
\dim_set:cn { l__nm_row _ \__nm_i _ min _ dim }
{
@@ -1538,7 +1540,7 @@
\dim_set_eq:cc { l__nm_row _ \int_eval:n { \__nm_i + 1 } _ max _ dim }
{ l__nm_row_\__nm_i _min_dim }
}
- \int_step_variable:nnnNn 1 1 { \g__nm_column_int - 1 } \__nm_j
+ \int_step_variable:nNn { \g__nm_column_int - 1 } \__nm_j
{
\dim_set:cn { l__nm_column _ \__nm_j _ max _ dim }
{
@@ -1563,6 +1565,22 @@
\__nm_create_nodes:
\end{tikzpicture}
\cs_set:Nn \__nm_create_extra_nodes: { }
+ \begin { tikzpicture } [ remember~picture , overlay ]
+ \tikz@parse@node \pgfutil@firstofone
+ ( nm - \int_use:N \g__nm_env_int - 1 - 1 - large .north~west )
+ \dim_gset:Nn \g_tmpa_dim \pgf@x
+ \tikz@parse@node \pgfutil@firstofone
+ ( nm - \int_use:N \g__nm_env_int - 1 -
+ \int_use:N \g__nm_column_int - large .north~east )
+ \dim_gset:Nn \g_tmpb_dim \pgf@x
+ \end { tikzpicture }
+ \iow_now:Nn \@mainaux \ExplSyntaxOn
+ \iow_now:Nx \@mainaux
+ {
+ \cs_gset:cpn { __nm_width_ \int_use:N \g__nm_env_int }
+ { \dim_eval:n { \g_tmpb_dim - \g_tmpa_dim } }
+ }
+ \iow_now:Nn \@mainaux \ExplSyntaxOff
}
\cs_new_protected:Nn \__nm_create_nodes:
{
@@ -1627,7 +1645,7 @@
\cs_new:Npn \__nm_seq_mapthread_function:NNN #1 #2 #3
{
\group_begin:
- \int_step_inline:nnnn 1 1 { \seq_count:N #1 }
+ \int_step_inline:nn { \seq_count:N #1 }
{
\seq_pop:NN #1 \l_tmpa_tl
\seq_pop:NN #2 \l_tmpb_tl
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 12:30:21 +0000