Removed unused files

git-svn-id: svn://tug.org/texlive/trunk@62920 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 0 insertions, 1644 deletions

diff --git a/Master/tlpkg/tlgs/lib/cat.ps b/Master/tlpkg/tlgs/lib/cat.ps
deleted file mode 100644
index 6c88c2f4824..00000000000
--- a/Master/tlpkg/tlgs/lib/cat.ps
+++ /dev/null
@@ -1,74 +0,0 @@
-% Copyright (C) 2001-2021 Artifex Software, Inc.
-% All Rights Reserved.
-%
-% This software is provided AS-IS with no warranty, either express or
-% implied.
-%
-% This software is distributed under license and may not be copied,
-% modified or distributed except as expressly authorized under the terms
-% of the license contained in the file LICENSE in this distribution.
-%
-% Refer to licensing information at http://www.artifex.com or contact
-% Artifex Software, Inc.,  1305 Grant Avenue - Suite 200, Novato,
-% CA 94945, U.S.A., +1(415)492-9861, for further information.
-%
-%
-% $Id: cat.ps 8331 2008-02-05 11:07:00Z kens $
-%
-% Appends one file to another. Primarily used to overcome the
-% 'copy' limitation of Windows command shell for ps2epsi
-%
-% the files to be appended are given by the environament
-% variables %infile% and %outfile%. %infile% is appended to
-% %outfile%
-%
-
-/datastring 1024 string def
-
-{
-        (outfile) getenv
-        {
-                /outfilename exch def
-                (infile) getenv
-                {
-                        /infilename exch def
-
-                        infilename status
-                        {
-                                pop pop pop pop outfilename status
-                                {
-                                        pop pop pop pop
-                                        infilename (r) file /infile exch def
-                                        outfilename (a+) file /outfile exch def
-                                        {
-                                                infile datastring readstring
-                                                {
-                                                        outfile exch writestring
-                                                }
-                                                {
-                                                        dup length 0 gt
-                                                        {outfile exch writestring} {pop} ifelse
-                                                        exit
-                                                } ifelse
-                                        } loop
-                                        infile closefile
-                                        outfile closefile
-                                }
-                                {
-                                        (Failed to find file ) print outfilename ==
-                                } ifelse
-                        }
-                        {
-                                (Failed to find file ) print infilename ==
-                        } ifelse
-                }
-                {
-                        (Couldn't find %infile% environment variable) ==
-                } ifelse
-        }
-        {
-                (Couldn't find %outfile% environment variable) ==
-        }
-        ifelse
-} bind
-exec
diff --git a/Master/tlpkg/tlgs/lib/font2pcl.ps b/Master/tlpkg/tlgs/lib/font2pcl.ps
deleted file mode 100644
index 7ab9330d898..00000000000
--- a/Master/tlpkg/tlgs/lib/font2pcl.ps
+++ /dev/null
@@ -1,604 +0,0 @@
-% Copyright (C) 2001-2021 Artifex Software, Inc.
-% All Rights Reserved.
-%
-% This software is provided AS-IS with no warranty, either express or
-% implied.
-%
-% This software is distributed under license and may not be copied,
-% modified or distributed except as expressly authorized under the terms
-% of the license contained in the file LICENSE in this distribution.
-%
-% Refer to licensing information at http://www.artifex.com or contact
-% Artifex Software, Inc.,  1305 Grant Avenue - Suite 200, Novato,
-% CA 94945, U.S.A., +1(415)492-9861, for further information.
-%
-
-% font2pcl.ps
-% Write out a font as a PCL bitmap font.
-
-/pcldict 60 dict def
-
-% Write out the current font as a PCL bitmap font.
-% The current transformation matrix defines the font size and orientation.
-
-/WriteResolution? false def	% true=use "resolution bound font" format,
-                                % false=use older format
-
-/LJ4 false def			% true=use LJ4 Typeface code
-                                % false=use LJIIP/IID/IIIx Typeface code
-
-pcldict begin		% internal procedures
-
-/findstring	% <string> <substring> findstring <bool>
- { search { pop pop pop true } { pop false } ifelse
- } def
-
-        % Determine which set of keywords is present in a string.
-        % The last keyword set must be empty.
-
-/keysearch	% <string> <array of arrays of keywords> keysearch <index>
- { 0 1 2 index length 1 sub
-    { 2 copy get true exch
-       {	% Stack: <string> <a.a.k.> <index> <bool> <keyword>
-         4 index exch findstring and
-       }
-      forall
-       { 0 exch getinterval exit
-       }
-      if pop
-    }
-   for
-   exch pop length	% invalid index if missing
- } def
-
-        % Determine the device height of a string in quarter-dots.
-
-/charheight		% <string> charheight <int>
- { gsave newpath 0 0 moveto false charpath
-   pathbbox exch pop exch sub exch pop 0 exch grestore
-   dtransform add abs 4 mul cvi
- } def
-
-        % Compute an integer version of the transformed FontBBox.
-
-/inflate		% <num> inflate <num>
- { dup 0 gt { ceiling } { floor } ifelse
- } def
-/ixbbox			% - ixbbox <llx> <lly> <urx> <ury>
- { /FontBBox load aload pop		% might be executable or literal
-   4 2 roll transform exch truncate cvi exch truncate cvi
-   4 2 roll transform exch inflate cvi exch inflate cvi
- } def
-
-        % Determine the original font of a possibly transformed font.
-        % Since some badly behaved PostScript files construct transformed
-        % fonts "by hand", we can't just rely on the OrigFont pointers.
-        % Instead, if a font with the given name exists, and if its
-        % entries for FontType and UniqueID match those of the font we
-        % obtain by following the OrigFont chain, we use that font.
-
-/origfont
- {  { dup /OrigFont known not { exit } if /OrigFont get } loop
-   FontDirectory 1 index /FontName get .knownget
-    {		% Stack: origfont namedfont
-      1 index /FontType get 1 index /FontType get eq
-       { 1 index /UniqueID .knownget
-          { 1 index /UniqueID .knownget
-             { eq { exch } if }
-             { pop }
-            ifelse
-          }
-         if
-       }
-      if pop
-    }
-   if
- } def
-
-        % Determine the bounding box of the current device's image.
-        % Free variables: row, zerow.
-
-/devbbox		% <rw> <rh> devbbox <ymin> <ymax1> <xmin> <xmax1>
- {		% Find top and bottom whitespace.
-   dup
-    { dup 0 eq { exit } if 1 sub
-      dup currentdevice exch row copyscanlines
-      zerow ne { 1 add exit } if
-    }
-   loop		% ymax1
-   0
-    { 2 copy eq { exit } if
-      dup currentdevice exch row copyscanlines
-      zerow ne { exit } if
-      1 add
-    }
-   loop		% ymin
-   exch
-                % Find left and right whitespace.
-   3 index 0
-                % Stack: rw rh ymin ymax1 xmin xmax1
-   3 index 1 4 index 1 sub
-    { currentdevice exch row copyscanlines .findzeros
-      exch 4 1 roll .max 3 1 roll .min exch
-    }
-   for		% xmin xmax1
-                % Special check: xmin > xmax1 if height = 0
-   2 copy gt { exch pop dup } if
-   6 -2 roll pop pop
-
- } def
-
-        % Write values on outfile.
-
- /w1 { 255 and outfile exch write } def
- /w2 { dup -8 bitshift w1 w1 } def
- /wbyte			% <byte> <label> wbyte
-  { VDEBUG { print ( =byte= ) print dup == flush } { pop } ifelse w1
-  } def
- /wword			% <word16> <label> wword
-  { VDEBUG { print ( =word= ) print dup == flush } { pop } ifelse w2
-  } def
- /wdword		% <word32> <label> wdword
-  { VDEBUG { print ( =dword= ) print dup == flush } { pop } ifelse
-    dup -16 bitshift w2 w2
-  } def
-
-/style.posture.keys
- [ { (Italic) } { (Oblique) }
-   { }
- ] def
-/style.posture.values <010100> def
-
-/style.appearance.width.keys
- [ { (Ultra) (Compressed) }
-   { (Extra) (Compressed) }
-   { (Extra) (Condensed) }
-   { (Extra) (Extended) }
-   { (Extra) (Expanded) }
-   { (Compressed) }
-   { (Condensed) }
-   { (Extended) }
-   { (Expanded) }
-   { }
- ] def
-/style.appearance.width.values <04030207070201060600> def
-
-/width.type.keys
- [ { (Ultra) (Compressed) }
-   { (Extra) (Compressed) }
-   { (Extra) (Condensed) }
-   { (Extra) (Expanded) }
-   { (Compressed) }
-   { (Condensed) }
-   { (Expanded) }
-   { }
- ] def
-/width.type.values <fbfcfd03fdfe0200> def
-
-/stroke.weight.keys
- [ { (Ultra) (Thin) }
-   { (Ultra) (Black) }
-   { (Extra) (Thin) }
-   { (Extra) (Light) }
-   { (Extra) (Bold) }
-   { (Extra) (Black) }
-   { (Demi) (Light) }
-   { (Demi) (Bold) }
-   { (Semi) (Light) }
-   { (Semi) (Bold) }
-   { (Thin) }
-   { (Light) }
-   { (Bold) }
-   { (Black) }
-   { }
- ] def
-/stroke.weight.values <f907fafc0406fe02ff01fbfd030500> def
-
-/vendor.keys
- [ { (Agfa) }
-   { (Bitstream) }
-   { (Linotype) }
-   { (Monotype) }
-   { (Adobe) }
-   { }
- ] def
-/vendor.default.index 4 def		% might as well be Adobe
-/old.vendor.values <020406080a00> def
-/new.vendor.values <010203040500> def
-/vendor.initials (CBLMA\000) def
-
-currentdict readonly end pop		% pcldict
-
-% Convert and write a PCL font for the current font and transformation.
-
-% Write the font header.  We split this off only to avoid overflowing
-% the limit on the maximum size of a procedure.
-% Free variables: outfile uury u0y rw rh orientation uh ully
-/writefontheader
- { outfile (\033\)s) writestring
-   outfile 64 WriteResolution? { 4 add } if
-     Copyright length add write==only
-   outfile (W) writestring
-   WriteResolution? { 20 68 } { 0 64 } ifelse
-     (Font Descriptor Size) wword
-     (Header Format) wbyte
-   1 (Font Type) wbyte
-   FullName style.posture.keys keysearch style.posture.values exch get
-   FullName style.appearance.width.keys keysearch
-     style.appearance.width.values exch get 4 mul add
-   PaintType 2 eq { 32 add } if
-     /style exch def
-   style -8 bitshift (Style MSB) wbyte
-   0 (Reserved) wbyte
-   /baseline uury 1 sub u0y sub def
-     baseline (Baseline Position) wword
-   rw (Cell Width) wword
-   rh (Cell Height) wword
-   orientation (Orientation) wbyte
-   FontInfo /isFixedPitch .knownget not { false } if
-    { 0 } { 1 } ifelse (Spacing) wbyte
-        % Use loop/exit to fake a multiple-exit block.
-    { Encoding StandardEncoding eq { 10 (J) exit } if
-      Encoding ISOLatin1Encoding eq { 11 (J) exit } if
-      Encoding SymbolEncoding eq { 19 (M) exit } if
-      Encoding DingbatsEncoding eq { 10 (L) exit } if
-%      (Warning: unknown Encoding, using ISOLatin1.\n) print flush
-      11 (J) exit
-    }
-   loop
-   0 get 64 sub exch 32 mul add (Symbol Set) wword
-   ( ) stringwidth pop 0 dtransform add abs 4 mul
-     /pitch exch def
-   pitch cvi (Pitch) wword
-   uh 4 mul (Height) wword			% Height
-   (x) charheight (x-Height) wword
-   FullName width.type.keys keysearch
-     width.type.values exch get (Width Type) wbyte
-   style 255 and (Style LSB) wbyte
-   FullName stroke.weight.keys keysearch
-     stroke.weight.values exch get (Stroke Weight) wbyte
-   FullName vendor.keys keysearch
-     dup vendor.initials exch get 0 eq
-      {		% No vendor in FullName, try Notice
-        pop Copyright vendor.keys keysearch
-        dup vendor.initials exch get 0 eq { pop vendor.default.index } if
-      }
-     if
-     /vendor.index exch def
-   0 (Typeface LSB) wbyte		% punt
-   0 (Typeface MSB) wbyte		% punt
-   0 (Serif Style) wbyte		% punt
-   2 (Quality) wbyte
-   0 (Placement) wbyte
-   gsave FontMatrix concat rot neg rotate
-   /ulwidth
-     FontInfo /UnderlineThickness .knownget
-      { 0 exch dtransform exch pop abs }
-      { resolution 100 div }
-     ifelse def
-   FontInfo /UnderlinePosition .knownget
-    { 0 exch transform exch pop negY ulwidth 2 div add }
-    { ully ulwidth add }
-   ifelse u0y sub
-   round cvi 1 .max 255 .min (Underline Position) wbyte
-   ulwidth round cvi 1 .max 255 .min (Underline Thickness) wbyte
-   grestore
-   uh 1.2 mul 4 mul cvi (Text Height) wword
-   (average lowercase character) dup stringwidth
-     pop 0 dtransform add abs
-     exch length div 4 mul cvi (Text Width) wword
-   0
-    { dup Encoding exch get /.notdef ne { exit } if
-      1 add
-    }
-   loop (First Code) wword
-   255
-    { dup Encoding exch get /.notdef ne { exit } if
-      1 sub
-    }
-   loop (Last Code) wword
-   pitch dup cvi sub 256 mul cvi (Pitch Extended) wbyte
-   0 (Height Extended) wbyte
-   0 (Cap Height) wword			% (default)
-   currentfont /UniqueID known { UniqueID } { 0 } ifelse
-     16#c1000000 add (Font Number (Adobe UniqueID)) wdword
-   FontName length 16 .max string
-     dup FontName exch cvs pop
-     outfile exch 0 16 getinterval writestring	% Font Name
-   WriteResolution?
-    { resolution dup (X Resolution) wword (Y Resolution) wword
-    }
-   if
-   outfile Copyright writestring	% Copyright
- } def
-
-/writePCL		% <fontfile> <resolution> writePCL -
- {
-   save
-   currentfont begin
-   pcldict begin
-   80 dict begin		% allow for recursion
-     /saved exch def
-     /resolution exch def
-     /outfile exch def
-   matrix currentmatrix dup 4 0 put dup 5 0 put setmatrix
-
-        % Supply some default values so we don't have to check later.
-
-   currentfont /FontInfo known not { /FontInfo 1 dict def } if
-   currentfont /FontName known not { /FontName () def } if
-   /Copyright   FontInfo /Notice .knownget not { () } if   def
-   /FullName
-     FontInfo /FullName .knownget not
-      { FontName dup length string cvs }
-     if def
-
-        % Determine the original font, and its relationship to this one.
-
-   /OrigFont currentfont origfont def
-   /OrigMatrix OrigFont /FontMatrix get def
-   /OrigMatrixInverse OrigMatrix matrix invertmatrix def
-   /ScaleMatrix matrix currentfont OrigFont ne
-    { FontMatrix exch OrigMatrixInverse exch concatmatrix
-    } if
-   def
-   /CurrentScaleMatrix
-     matrix currentmatrix
-     matrix defaultmatrix
-     dup 0 get 1 index 3 get mul 0 lt
-     1 index dup 1 get exch 2 get mul 0 gt or
-       /flipY exch def
-     dup invertmatrix
-     dup concatmatrix
-   def
-   /negY flipY { {neg} } { {} } ifelse def
-
-        % Print debugging information.
-
-   /CDEBUG where { pop } { /CDEBUG false def } ifelse
-   /VDEBUG where { pop } { /VDEBUG false def } ifelse
-   CDEBUG { /VDEBUG true def } if
-   DEBUG
-    { (currentmatrix: ) print matrix currentmatrix ==
-      (defaultmatrix: ) print matrix defaultmatrix ==
-      (flipY: ) print flipY ==
-      (scaling matrix: ) print CurrentScaleMatrix ==
-      (FontMatrix: ) print FontMatrix ==
-      (FontBBox: ) print /FontBBox load ==
-      currentfont OrigFont ne
-       { OrigFont /FontName .knownget { (orig FontName: ) print == } if
-         (orig FontMatrix: ) print OrigMatrix ==
-       } if
-      currentfont /ScaleMatrix .knownget { (ScaleMatrix: ) print == } if
-      gsave
-        FontMatrix concat
-        (combined matrix: ) print matrix currentmatrix ==
-      grestore
-      flush
-    } if
-
-        % Determine the orientation.
-
-   ScaleMatrix matrix currentmatrix dup concatmatrix
-   0 1 3
-    { 1 index 1 get 0 eq 2 index 2 get 0 eq and 2 index 0 get 0 gt and
-       { exit } if
-      pop -90 matrix rotate exch dup concatmatrix
-    }
-   for
-   dup type /integertype ne
-    { (Only rotations by multiples of 90 degrees are supported:\n) print
-      == flush
-      saved end end end restore stop
-    }
-   if
-   /orientation exch def
-   /rot orientation 90 mul def
-   DEBUG { (orientation: ) print orientation == flush } if
-
-   dup dup 0 get exch 3 get negY sub abs 0.5 ge
-    { (Only identical scaling in X and Y is supported:\n) print
-      exch flipY 3 array astore ==
-%
-% .devicename has been deprecated
-%      currentdevice .devicename ==
-%
-      currentpagedevice /Name get ==
-      matrix defaultmatrix == flush
-      saved end end end restore stop
-    }
-   if pop
-
-        % Determine the font metrics, in the PCL character coordinate system,
-        % which has +Y going towards the top of the page.
-
-   gsave
-   FontMatrix concat
-     0 0 transform
-     negY round cvi /r0y exch def
-     round cvi /r0x exch def
-   ixbbox
-     negY /rury exch def  /rurx exch def
-     negY /rlly exch def  /rllx exch def
-     /rminx rllx rurx .min def
-     /rminy rlly negY rury negY .min def
-     /rw rurx rllx sub abs def
-     /rh rury rlly sub abs def
-   gsave rot neg rotate
-     0 0 transform
-     negY round cvi /u0y exch def
-     round cvi /u0x exch def
-   ixbbox
-     negY /uury exch def   /uurx exch def
-     negY /ully exch def   /ullx exch def
-     /uw uurx ullx sub def
-     /uh uury ully sub def
-   grestore
-   DEBUG
-    { (rmatrix: ) print matrix currentmatrix ==
-      (rFontBBox: ) print [rllx rlly rurx rury] ==
-      (uFontBBox: ) print [ullx ully uurx uury] ==
-      flush
-    } if
-   grestore
-
-        % Disable the character cache, to avoid excessive allocation
-        % and memory sandbars.
-
-   mark cachestatus   /upper exch def
-   cleartomark 0 setcachelimit
-
-        % Write the font header.
-
-   writefontheader
-
-        % Establish an image device for rasterizing characters.
-
-   matrix currentmatrix
-     dup 4 rminx neg put
-     dup 5 rminy neg put
-        % Round the width up to a multiple of 8
-        % so we don't get garbage bits in the last byte of each row.
-   rw 7 add -8 and rh <ff 00> makeimagedevice
-     /cdevice exch def
-   nulldevice			% prevent page device switching
-   cdevice setdevice
-
-        % Rasterize each character in turn.
-
-   /raster   rw 7 add 8 idiv   def
-   /row   raster string   def
-   /zerow   row length string   def
-   0 1 Encoding length 1 sub
-    { /cindex exch def
-      Encoding cindex get /.notdef ne
-       { VDEBUG { Encoding cindex get == flush } if
-         erasepage initgraphics
-         0 0 moveto currentpoint transform add
-         ( ) dup 0 cindex put show
-         currentpoint transform add exch sub round cvi
-           /cwidth exch abs def
-         rw rh devbbox
-         VDEBUG
-          { (image bbox: ) print 4 copy 4 2 roll 4 array astore == flush
-          } if
-                % Save the device bounding box.
-                % Note that this is in current device coordinates,
-                % not PCL (right-handed) coordinates.
-         /bqx exch def  /bpx exch def  /bqy exch def  /bpy exch def
-                % Re-render with the character justified to (0,0).
-                % This may be either the lower left or the upper left corner.
-         bpx neg bpy neg idtransform moveto
-         erasepage
-         VDEBUG { (show point: ) print [ currentpoint transform ] == flush } if
-         ( ) dup 0 cindex put show
-                % Find the bounding box.  Note that xmin and ymin are now 0,
-                % xmax1 = xw, and ymax1 = yh.
-         rw rh devbbox
-           /xw exch def
-                % xmin or ymin can be non-zero only if the character is blank.
-           xw 0 eq
-            { pop }
-            { dup 0 ne { (Non-zero xmin! ) print = } { pop } ifelse }
-           ifelse
-           /yh exch def
-           yh 0 eq
-            { pop }
-            { dup 0 ne { (Non-zero ymin! ) print = } { pop } ifelse }
-           ifelse
-
-         /xbw xw 7 add 8 idiv def
-         /xright raster 8 mul xw sub def
-                % Write the Character Code command.
-         outfile (\033*c) writestring
-         outfile cindex write==only
-         outfile (E) writestring
-                % Write the Character Definition command.
-         outfile (\033\(s) writestring
-         yh xbw mul 16 add
-         outfile exch write=only
-                % Record the character position for the .PCM file.
-         /cfpos outfile fileposition 1 add def
-         outfile (W\004\000\016\001) writestring
-         orientation (Orientation) wbyte 0 (Reserved) wbyte
-         rminx bpx add r0x sub (Left Offset) wword
-         flipY { rminy bpy add neg } { rminy bqy add } ifelse r0y sub
-           (Top Offset) wword
-         xw (Character Width) wword
-         yh (Character Height) wword
-         cwidth orientation 2 ge { neg } if 4 mul (Delta X) wword
-                % Write the character data.
-         flipY { 0 1 yh 1 sub } { yh 1 sub -1 0 } ifelse
-          { cdevice exch row copyscanlines
-            0 xbw getinterval
-            CDEBUG
-             { dup
-                { 8
-                   { dup 128 ge { (+) } { (.) } ifelse print
-                     127 and 1 bitshift
-                   }
-                  repeat pop
-                }
-               forall (\n) print
-             }
-            if
-            outfile exch writestring
-          }
-         for
-       }
-       { /bpx 0 def   /bpy 0 def   /bqx 0 def   /bqy 0 def
-         /cwidth 0 def
-         /cfpos 0 def
-       }
-      ifelse
-
-    }
-   for
-
-        % Wrap up.
-
-   upper setcachelimit
-   outfile closefile
-
-   nulldevice			% prevent page device switching
-   saved end end end restore
-
- } def
-
-% Provide definitions for testing with older or non-custom interpreters.
-
-/.findzeros where { pop (%END) .skipeof } if
-/.findzeros
- { userdict begin   /zs exch def   /zl zs length def
-   0 { dup zl ge { exit } if dup zs exch get 0 ne { exit } if 1 add } loop
-   zl { dup 0 eq { exit } if dup 1 sub zs exch get 0 ne { exit } if 1 sub } loop
-   exch 3 bitshift exch 3 bitshift
-   2 copy lt
-    { exch zs 1 index -3 bitshift get
-       { dup 16#80 and 0 ne { exit } if exch 1 add exch 1 bitshift } loop pop
-      exch zs 1 index -3 bitshift 1 sub get
-       { dup 1 and 0 ne { exit } if exch 1 sub exch -1 bitshift } loop pop
-    }
-   if end
- } bind def
-%END
-
-/write=only where { pop (%END) .skipeof } if
-/w=s 128 string def
-/write=only
- { w=s cvs writestring
- } bind def
-%END
-
-%**************** Test
-/PCLTEST where {
-  pop
-  /DEBUG true def
-  /CDEBUG true def
-  /VDEBUG true def
-  /Times-Roman findfont 10 scalefont setfont
-  (t.pcf) (w) file
-  300 72 div dup scale
-  300 writePCL
-  flush quit
-} if
diff --git a/Master/tlpkg/tlgs/lib/jobseparator.ps b/Master/tlpkg/tlgs/lib/jobseparator.ps
deleted file mode 100644
index fbb6920842f..00000000000
--- a/Master/tlpkg/tlgs/lib/jobseparator.ps
+++ /dev/null
@@ -1,3 +0,0 @@
-% Execute the "real" system version of the ^D to separate jobs
-% when -dJOBDSERVER is being used.
-<04> cvn .systemvar exec
diff --git a/Master/tlpkg/tlgs/lib/stcinfo.ps b/Master/tlpkg/tlgs/lib/stcinfo.ps
deleted file mode 100644
index 9f41b382e51..00000000000
--- a/Master/tlpkg/tlgs/lib/stcinfo.ps
+++ /dev/null
@@ -1,794 +0,0 @@
-% Copyright (C) 2001-2021 Artifex Software, Inc.
-% All Rights Reserved.
-%
-% This software is provided AS-IS with no warranty, either express or
-% implied.
-%
-% This software is distributed under license and may not be copied,
-% modified or distributed except as expressly authorized under the terms
-% of the license contained in the file LICENSE in this distribution.
-%
-% Refer to licensing information at http://www.artifex.com or contact
-% Artifex Software, Inc.,  1305 Grant Avenue - Suite 200, Novato,
-% CA 94945, U.S.A., +1(415)492-9861, for further information.
-%
-
-% stcinfo.ps
-% Epson Stylus-Color Printer-Driver
-
-% The purpose of this file is to print & show Parameters of the
-% stcolor-driver. If not run on ghostscript/stcolor, it prints
-% something like a color-chart.
-
-% use either existing STCinfo-dictionary, retrieve new one or create dummy
-
-statusdict begin product end
-dup (Ghostscript) eq 1 index (Artifex Ghostscript) eq or
-exch (AFPL Ghostscript) eq or{
-
-  currentdevice getdeviceprops .dicttomark
-  dup /Name get (stcolor) eq /STCi_onstc exch def
-  /STCinfo where {/STCinfo get exch pop} if
-  /STCinfo exch def
-
-}{
-
-  /STCinfo 10 dict def
-  STCinfo begin /Name (unknown) def end
-  /STCi_onstc false def
-
-}ifelse
-
-% Next Block are procedures to generate the color-triangles.
-% you may wish to separate them, just look ahead for the name
-% given in the next line to achieve that.
-% Begin: colortri_procedures
-
-% Plot the CIE-XY-triangle (or something like that)
-
-% /colortri_mat   Conversion matrix RGB -> XYZ
-% /colortri_bg    procedure, that takes X/Y-Values and delivers the
-%                 "background color" as RGB-Values, default is:
-%                 {pop pop 0.85 dup dup}
-
-% The default matrix was taken from:
-%             Color spaces FAQ - David Bourgin
-%             Date: 15/6/94 (items 5.3 and 6 updated)
-%             Last update: 29/6/94
-
-   /colortri_mat [ % RGB -> CIE XYZitu601-1 (D65)
-         0.4306 0.3415 0.1784
-         0.2220 0.7067 0.0713
-         0.0202 0.1295 0.9394
-   ] def
-
-   /colortri_bg {pop pop 0.85 dup dup} bind def
-
-% +---------------------------------------------------------------------+
-% | Besides from fixing bugs, nothing should be changed below this line |
-% +---------------------------------------------------------------------+
-
-%  Arbitrary operation on a pair of vectors, *CHANGES* 1st.
-%  invoke: Vaccu Vop op vop
-   /vop {
-      bind 0 1 3 index length 1 sub {
-       3 index 1 index get 3 index 2 index get 3 index exec 4 index 3 1 roll put
-      } for pop pop
-   } bind def
-
-   /vsub { {sub} vop } bind def % subtract two vectors
-   /vmul { {mul} vop } bind def % multiply two vectors
-
-%  Compute sum of vectors elements
-   /vsum {0.0 exch{add}forall} bind def
-
-%  Sum up products of elements
-   /veqn { [ 3 -1 roll {} forall ] exch vmul vsum } bind def
-
-%  Find index of |maximum| in array
-   /imax {
-      dup 0 get abs 0 exch % array i v[i]
-      1 1 4 index length 1 sub {
-         3 index 1 index get abs dup 3 index gt {4 2 roll}if pop pop
-      } for
-      3 -1 roll pop
-   } bind def
-
-%  Procedure to *CHANGE*  RGB-Values into XYZ-Values
-   /rgb2xyz {
-      0 3 6 { colortri_mat exch 3 getinterval 1 index veqn exch } for astore
-   } bind def
-
-% Procedure to *CHANGE* transform rgb->xy
-   /rgb2xy {
-      rgb2xyz
-      dup 0 get 1 index 1 get 2 index vsum % XYZ X Y sum
-      dup 0 ne {
-        exch 1 index div 3 1 roll div      % XYZ y x
-        2 index exch 0 exch put            % xYZ y
-        1 index exch 1 exch put            % xyZ
-      }{
-        pop pop pop dup 0 0 put dup 0 1 put
-      } ifelse
-      0 2 getinterval
-   } bind def
-
-% So here we go with our procedure
-
-/colortri { %Usage: box #pixels
-   save
-   1 index type /arraytype eq {exch 8}{3 1 roll} ifelse % Default scale
-   /colortri_scale exch def
-   /colortri_box   exch def
-
-%  Prepare some useful constants for xy -> RGB conversion
-
-   /colsum [                              % Array with column-sums
-     0 1 2{0 exch 3 1 index 6 add{colortri_mat exch get add}for}for
-   ] def
-
-   /Xrow colortri_mat 0 3 getinterval def % two rows from colortri_mat
-   /Yrow colortri_mat 3 3 getinterval def
-
-%  Avoid allocating new arrays
-   /xcoeff 3 array def
-   /ycoeff 3 array def
-
-% Procedure to derive RGB-Values form X,Y
-   /xy2rgb{ aload pop
-      dup     dup dup ycoeff astore colsum vmul Yrow vsub imax
-      3 index dup dup xcoeff astore colsum vmul Xrow vsub imax
-      3 -1 roll 1 index 1 index gt{
-         xcoeff ycoeff /xcoeff exch def /ycoeff exch def pop 3 -1 roll pop
-      }{
-        3 1 roll pop pop
-      } ifelse
-      1e-6 lt { % No Pivot ?
-         pop colortri_bg xcoeff astore pop
-      }{        % Have a Pivot
-         dup ycoeff exch get neg
-         0 1 2 { dup ycoeff exch get 2 index div ycoeff 3 1 roll put} for
-         pop ycoeff 1 index 0 put
-
-         xcoeff 1 index get
-         0 1 2 {
-            ycoeff 1 index get 2 index mul xcoeff 2 index get add
-            xcoeff 3 1 roll put
-         } for
-         pop xcoeff 1 index 0 put
-         xcoeff imax 1e-6 lt { % no Pivot ?
-           pop pop colortri_bg xcoeff astore pop
-         }{
-           dup 2 index or 3 exch sub
-           xcoeff 1 index get xcoeff 3 index get div neg
-           xcoeff exch 3 index exch put
-           xcoeff 1 index 1 put
-           ycoeff exch get ycoeff 2 index get xcoeff 4 -1 roll get mul add
-           xcoeff 3 1 roll put
-           0 1 2 {
-               xcoeff exch get dup -0.0015 lt exch 1.0015 gt or {
-                 colortri_bg xcoeff astore dup exit
-               } if
-           } for
-           pop pop xcoeff
-         } ifelse
-      } ifelse
-   } bind def
-
-% Compute the displayed range
-   [ 1 1 1 ] rgb2xy
-   dup 0 get /colortri_x0 exch def /colortri_dx colortri_x0 def
-   1 get     /colortri_y0 exch def /colortri_dy colortri_y0 def
-   [[0 0 1][0 1 0][0 1 1][1 0 0][1 0 1][1 1 0]] {
-      rgb2xy
-      dup 0 get
-      dup colortri_x0 lt {/colortri_x0 1 index def}if
-      dup colortri_dx gt {/colortri_dx 1 index def}if
-      pop 1 get
-      dup colortri_y0 lt {/colortri_y0 1 index def}if
-      dup colortri_dy gt {/colortri_dy 1 index def}if
-      pop
-   } forall
-   colortri_dx colortri_x0 sub /colortri_dx exch def
-   colortri_dy colortri_y0 sub /colortri_dy exch def
-%
-
-% determine the scale
-   colortri_box 2 get colortri_box 0 get sub colortri_dx div % fx
-   colortri_box 3 get colortri_box 1 get sub colortri_dy div % fx fy
-   gt { % fy limits
-      colortri_box 3 get colortri_box 1 get sub
-      dup colortri_dx mul colortri_dy div exch
-   }{   % fx limits
-      colortri_box 2 get colortri_box 0 get sub
-      dup colortri_dy mul colortri_dx div
-   } ifelse
-   dtransform abs colortri_scale div cvi /colortri_ny exch def
-              abs colortri_scale div cvi /colortri_nx exch def
-   colortri_nx colortri_scale mul colortri_ny colortri_scale mul
-   idtransform abs exch abs exch
-   colortri_box 0 get colortri_box 2 get 1 index sub 3 index sub 2 div add
-   colortri_box 1 get colortri_box 3 get 1 index sub 3 index sub 2 div add
-   transform .5 add cvi exch .5 add cvi exch itransform
-   translate scale
-
-%  String & indices
-   /colortri_tmp colortri_nx 3 mul string def
-   /colortri_dx colortri_dx colortri_nx 1 sub div def
-   /colortri_dy colortri_dy colortri_ny 1 sub div def
-   /colortri_xy [ colortri_x0 colortri_y0 ] def
-   /colortri_ie colortri_tmp length 3 sub def
-
-   colortri_nx colortri_ny 8 [ colortri_nx 0 0 colortri_ny 0 0 ]
-   {
-     colortri_xy 0 colortri_x0 put
-     0 3 colortri_ie {
-         colortri_tmp exch   % buf ir
-         colortri_xy xy2rgb  % buf ir rgb buf ib
-         2 index 2 index 2 add 2 index 2 get 255 mul cvi put
-         2 index 2 index 1 add 2 index 1 get 255 mul cvi put
-         0     get 255 mul cvi put
-         colortri_xy dup 0 exch 0 get colortri_dx add put
-     }for
-     colortri_xy dup 1 exch 1 get colortri_dy add put
-     colortri_tmp
-   } bind
-   false 3 colorimage
-   restore
-} bind def
-
-% [ newpath clippath pathbbox ]  colortri showpage % standalone usage
-
-% End:   colortri_procedures
-
-% The next section is a group of procedures, that I for myself
-% do no more fully understand, but they do the Job.
-
-% Begin: stcinfo_procedures_1
-
-% fetch a parameter from the dictionary
-/STCiget { STCinfo exch get } bind def
-
-% action upon ProcessColorModel
-/STCimode {
-   /ProcessColorModel STCiget dup
-   /DeviceCMYK eq{pop 2}{/DeviceRGB eq{1}{0}ifelse}ifelse get exec
-} bind def
-
-% print given number of blanks
-/STCipspace {
-   dup 0 gt{ 1 exch 1 exch { pop ( ) print}for }{ pop } ifelse
-} bind def
-
-% print right or left-justified text
-/STCiprint {
-   dup 0 gt { dup 2 index length sub STCipspace } if
-   1 index print
-   dup 0 lt { neg dup 2 index length sub STCipspace } if
-   pop pop
-} bind def
-
-% floating-point to fixed-length-string conversion
-
-/STCicvs { % number -> string
-
-% Prepare the result
-   8 string dup 0 (        ) putinterval
-   exch
-
-% Make it unsigned
-   dup 0 lt {neg(-)}{( )}ifelse 0 get exch
-
-   dup 1000 lt 1 index 0 eq 2 index 0.001 ge or and { % floating point
-     (e+) 0
-   }{                                                 % engineering
-      0 {
-        1 index 1000.0 ge
-          {3 add exch 1000 div exch}
-          {1 index 1 lt {3 sub exch 1000 mul exch}{exit}ifelse}
-        ifelse
-      }loop
-      dup 0 lt {neg(e-)}{(e+)}ifelse exch
-  }ifelse
-
-% string sign num esig e
-
-% always up to three Integer Digits plus sign
-   2 index cvi 3 { % string sign num esig e int ind
-      1 index 10 div cvi dup 10 mul 3 index exch sub cvi
-      (0123456789) exch get 8 index exch 3 index exch put
-      3 -2 roll 1 sub exch pop dup 0 eq 2 index 0 eq or {exit} if
-   } loop exch pop % string sign num esig e ind
-   5 index exch 6 -1 roll put % string num esig e
-
-% print either fraction or exponent
-   dup 0 eq { pop pop dup cvi sub % String fraction
-
-      dup 0.0 ne { % Fraction present
-         0.0005 add 1 index 4 (.) putinterval
-         5 1 7 { % string frac ind
-           exch 10 mul dup cvi exch 1 index sub % string ind ic nfrac
-           exch (0123456789) exch get 3 -1 roll % string nfrac chr ind
-           exch 3 index 3 1 roll put
-         } for
-      } if
-      pop
-
-   }{ 3 -1 roll pop % string esig e
-
-      exch 2 index exch 4 exch putinterval
-      7 -1 6 { % string n i
-         1 index 10 div cvi dup 10 mul 3 index exch sub cvi % string n i n/10
-         (0123456789) exch get 4 index exch 3 index exch put
-         exch pop exch pop
-      } for
-      pop
-   } ifelse
-
-} bind def
-
-% compute colorvalue-steps from transfer & coding
-/STCisteps { % xfer, coding => X-values, Y-Values
-% 2^nbits
-   2 /BitsPerComponent STCiget dup 11 gt { pop 11 } if exp cvi
-
-% X & Y - Arrays (stack: xv:4  yv:3 xfer:2  coding:1 2^ni:0)
-   dup 1 add array 1 index array 5 2 roll
-
-% compute GS-Color-Value according to the coding-array
-
-   1 index null eq { % no coding present
-
-      0 1 2 index 1 sub {
-         dup 6 index exch dup 4 index div put
-         4 index exch dup 3 index 1 sub div put
-      } for
-
-   }{                % coding-array given
-
-      1.0 1 index 1 sub div % y step
-      0                     % current index
-      0 1 4 index 1 sub { % over indices
-         dup 3 index mul
-         {
-            dup 3 index 1 add dup 8 index length ge {pop pop exit} if % i y
-            7 index exch get le {exit} if
-            2 index 1 add 3 1 roll 4 -1 roll pop
-         } loop
-         5 index 3 index get sub
-         5 index 3 index 1 add get 6 index 4 index get sub div
-         2 index add 5 index length 1 sub div
-         2 copy exch dup 0 eq {
-            10 index exch 0.0 put pop
-         }{
-            dup 10 index exch 1 sub get 3 -1 roll add 2 div
-            10 index 3 1 roll put
-         }ifelse
-         7 index 3 1 roll put
-     } for               % over indices
-     pop pop
-   } ifelse
-   4 index 1 index 1.0 put
-
-% Replace the raw y-values by those computed from the transfer-array
-
-   0 1 2 index 1 sub { % over indices, 2nd
-      dup 5 index exch get
-      dup 5 index length 1 sub mul cvi % -> iy
-      5 index 1 index get
-      1 index 1 add 7 index length lt {
-        dup 7 index 3 index 1 add get exch sub
-        3 index 3 index 9 index length 1 sub div sub mul
-        7 index length 1 sub mul add
-      } if
-      exch pop exch pop 5 index 3 1 roll put
-   } for               % over indices, 2nd
-
-   pop pop pop
-} bind def
-
-/STCibar { % Window X-Values proc => Window
-   0 1 3 index length 2 sub {
-     dup 3 index exch get exch
-     1 add 3 index exch get
-     dup 2 index add 2 div 3 index exec % Color to average
-     4 index 2 get 5 index 0 get sub exch 1 index mul 5 index 0 get add 3 1 roll
-     mul 4 index 0 get add 4 index 3 get 5 index 1 get
-     newpath
-     2 index 1 index moveto
-     3 index 1 index lineto
-     3 index 2 index lineto
-     2 index 2 index lineto
-     closepath fill
-     pop pop pop pop
-   } for
-   pop pop
-   0 setgray
-   newpath
-   dup 0 get 1 index 1 get moveto
-   dup 2 get 1 index 1 get lineto
-   dup 2 get 1 index 3 get lineto
-   dup 0 get 1 index 3 get lineto
-   closepath stroke
-   pop
-} bind def
-
-% End:   stcinfo_procedures_1
-
-% Begin: stcinfo_preparation
-
-% Compute used area from clippath
-
-/STCi_clip [
-  newpath clippath pathbbox
-  2 sub 4 1 roll 2 sub 4 1 roll 2 add 4 1 roll 2 add 4 1 roll
-] def
-
-%
-% Perpare the texual messages, assume no stcolor if this fails
-%
-{
-   /STCi_stopped % A Special Mark
-
-% Textual Parameters (an array of pairs of strings)
-   /STCi_l1 0 def
-   /STCi_l2 0 def
-   /STCi_text [
-% Driver-Name & Version
-      (Parameters of)
-         /Name STCiget length /Version STCiget length add 1 add string
-         dup 0 /Name STCiget putinterval dup /Name STCiget length (-)putinterval
-         dup /Name STCiget length 1 add /Version STCiget putinterval
-% Dithering-Algorithm
-      (Dithering)
-         /Dithering STCiget
-         [{( \(Monochrome\))}{( \(RGB\))}{( \(CMYK\))}] STCimode
-         dup length 2 index length add string exch 1 index exch
-         3 index length exch putinterval dup 3 1 roll exch 0 exch putinterval
-% Flags for the algorithm
-      (Flag4-0) 5 string
-         dup 0 /Flag4 STCiget {(T)}{(f)} ifelse putinterval
-         dup 1 /Flag3 STCiget {(T)}{(f)} ifelse putinterval
-         dup 2 /Flag2 STCiget {(T)}{(f)} ifelse putinterval
-         dup 3 /Flag1 STCiget {(T)}{(f)} ifelse putinterval
-         dup 4 /Flag0 STCiget {(T)}{(f)} ifelse putinterval
-
-% Bits Per Pixel & Bits Per Component
-      (BitsPerPixel) 10 string % (nn -> nxnn)
-         /BitsPerPixel STCiget 1 index cvs length % string used
-         dup 2 index exch ( -> ) putinterval 4 add dup 2 add exch 2 index exch
-         [{(1x)}{(3x)}{(4x)}] STCimode putinterval % String used
-         /BitsPerComponent STCiget 2 index 2 index 2 getinterval cvs length add
-         0 exch getinterval
-
-      () ()
-% ColorAdjustMatrix
-      (ColorAdjustMatrix)
-         /ColorAdjustMatrix STCiget dup null eq {
-            pop (default)
-         }{
-            { STCicvs } forall
-            [{ % Monochrome
-               26 string
-               dup  0 6 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9 5 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18 4 -1 roll putinterval
-             }{ % RGB
-               26 string
-               dup  0 12 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9 11 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18 10 -1 roll putinterval
-
-               () 26 string
-               dup  0 11 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9 10 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18  9 -1 roll putinterval
-
-               () 26 string
-               dup  0 10 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9  9 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18  8 -1 roll putinterval
-             }{
-               35 string
-               dup  0 19 -1 roll  putinterval dup  8 ( ) putinterval
-               dup  9 18 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18 17 -1 roll putinterval dup 26 ( ) putinterval
-               dup 27 16 -1 roll putinterval
-
-               () 35 string
-               dup  0 17 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9 16 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18 15 -1 roll putinterval dup 26 ( ) putinterval
-               dup 27 14 -1 roll putinterval
-
-               () 35 string
-               dup  0 15 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9 14 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18 13 -1 roll putinterval dup 26 ( ) putinterval
-               dup 27 12 -1 roll putinterval
-
-               () 35 string
-               dup  0 13 -1 roll putinterval dup  8 ( ) putinterval
-               dup  9 12 -1 roll putinterval dup 17 ( ) putinterval
-               dup 18 11 -1 roll putinterval dup 26 ( ) putinterval
-               dup 27 10 -1 roll putinterval
-
-             }
-            ] STCimode
-         } ifelse
-      () ()
-
-% Printer Model
-      (Printer-Model)  /Model STCiget
-
-% Resolution
-      (Resolution) 15 string % (nnnnnxnnnnn DpI)
-         /HWResolution STCiget 0 get cvi 1 index cvs length
-         dup 2 index exch (x) putinterval 1 add dup 2 index exch 5 getinterval
-         /HWResolution STCiget 1 get cvi exch cvs length add dup 2 index
-         exch ( DpI) putinterval 4 add 0 exch getinterval
-
-% HWsize holds entire Page in Pixels,
-% .HWMargins is [left,bottom,right,top] in Points
-      (Printed Area)   18 string % (nnnnnxnnnnn Pixel)
-         /HWSize STCiget 0 get /.HWMargins STCiget dup 0 get exch 2 get add
-         /HWResolution STCiget 0 get mul 72.0 div sub cvi 1 index cvs length
-         dup 2 index exch (x) putinterval 1 add dup 2 index exch 5 getinterval
-         /HWSize STCiget 1 get /.HWMargins STCiget dup 1 get exch 3 get add
-         /HWResolution STCiget 1 get mul 72.0 div sub cvi exch cvs length add
-         dup 2 index exch ( Pixel) putinterval 6 add 0 exch getinterval
-
-      () ()
-% WeaveMode
-      (Weave-Mode)
-         /noWeave STCiget {
-           (noWeave)
-         }{
-           /Microweave STCiget {(Microweave)}{(Softweave)}ifelse
-         }ifelse
-% Unidirectional
-      (Unidirectional) /Unidirectional STCiget {(ON)}{(off)} ifelse
-% Output coding
-      (OutputCode)     /OutputCode STCiget
-% number of heads
-      (escp_Band)   /escp_Band   STCiget 3 string cvs
-      (escp_Width)  /escp_Width  STCiget 5 string cvs
-      (escp_Height) /escp_Height STCiget 5 string cvs
-      (escp_Top)    /escp_Top    STCiget 5 string cvs
-      (escp_Bottom) /escp_Bottom STCiget 5 string cvs
-   ] def
-
-%
-% compute the Proper X & Y-Arrays
-%
-   [{  % Monochrome
-     /Ktransfer STCiget /Kcoding STCiget STCisteps
-     /STCi_yv   [ 3 -1 roll ] def
-     /STCi_xv   [ 3 -1 roll ] def
-     /STCi_col  [[0 0 0]] def
-     /STCi_set  [{1.0 exch sub setgray}] def
-    }{ % RGB
-     /Rtransfer STCiget /Rcoding STCiget STCisteps
-     /Gtransfer STCiget /Gcoding STCiget STCisteps
-     /Btransfer STCiget /Bcoding STCiget STCisteps
-     exch 4 -1 roll 6 -1 roll exch 3 -1 roll
-     /STCi_xv [ 5 2 roll ] def
-     /STCi_yv [ 5 2 roll ] def
-     /STCi_col  [[1 0 0] [0 1 0] [0 0 1]] def
-     /STCi_set [
-      {1.0 exch sub 1 exch dup setrgbcolor}
-      {1.0 exch sub dup 1 exch setrgbcolor}
-      {1.0 exch sub dup 1      setrgbcolor}
-      ] def
-    }{ % CMYK
-     /Ctransfer STCiget /Ccoding STCiget STCisteps
-     /Mtransfer STCiget /Mcoding STCiget STCisteps exch 3 1 roll
-     /Ytransfer STCiget /Ycoding STCiget STCisteps exch 4 1 roll
-     /Ktransfer STCiget /Kcoding STCiget STCisteps exch 5 1 roll
-     /STCi_yv  [ 6 2 roll ] def
-     /STCi_xv  [ 6 2 roll ] def
-     /STCi_col [[0 1 1] [1 0 1] [1.0 0.5 0.0] [0 0 0]] def
-     /STCi_set [
-       { 0 0 0 setcmykcolor }
-       { 0 exch 0 0 setcmykcolor }
-       { 0 exch 0 exch 0 setcmykcolor }
-       { 0 exch 0 exch 0 exch setcmykcolor }
-     ] def
-    }
-   ]STCimode
-
-} stopped
-
-{ {/STCi_stopped eq {exit}if}loop true}
-{ {/STCi_stopped eq {exit}if}loop false} ifelse
-
-% End:   stcinfo_preparation
-
-% The Next section does the real job
-
-% Begin: stcinfo_execution
-{
-   (%%[ stcinfo.ps: currentdevice is not supported -> colortri ]%%\n) print
-   STCi_clip  colortri % The default action
-
-}{
-%
-% Print the text
-%
-   0 2 STCi_text length 2 sub { dup 1 add exch
-     STCi_text exch get length dup STCi_l1 gt{/STCi_l1 exch def}{pop}ifelse
-     STCi_text exch get length dup STCi_l2 gt{/STCi_l2 exch def}{pop}ifelse
-   } for
-   /STCi_l2 STCi_l2 neg def
-   0 2 STCi_text length 2 sub {
-     dup 1 add STCi_text exch get exch STCi_text exch get
-     1 index length 0 gt {
-       dup STCi_l1 STCiprint length 0 gt {(: )}{(  )}ifelse print print
-     }{
-       pop pop
-     } ifelse
-     (\n) print
-   } for
-%
-% Deactivate a present ColorAdjust Matrix, if any
-%
-   /ColorAdjustMatrix STCiget null ne STCi_onstc and {
-       mark
-       /ColorAdjustMatrix null
-       currentdevice putdeviceprops pop
-   } if
-%
-% "Show" the text
-%
-   /Times-Roman findfont 10 scalefont setfont
-   /STCi_l1 0 def
-   0 2 STCi_text length 2 sub {
-       STCi_text exch get stringwidth pop dup STCi_l1 gt {
-          /STCi_l1 exch def
-       }{
-          pop
-       } ifelse
-   } for
-   STCi_l1 STCi_clip 0 get add /STCi_l1 exch def
-
-   STCi_clip 3 get 12 sub
-   0 2 STCi_text length 2 sub {
-       STCi_text exch get dup length 0 gt {
-         dup stringwidth pop STCi_l1 exch sub 2 index moveto show
-       }{
-          pop
-       } ifelse
-       12 sub
-   } for
-   pop
-
-   /Courier findfont 10 scalefont setfont
-   /STCi_l2 0 def
-   1 2 STCi_text length 1 sub {
-       STCi_text exch get stringwidth pop dup STCi_l2 gt {
-          /STCi_l2 exch def
-       }{
-          pop
-       } ifelse
-   } for
-
-   STCi_clip 3 get 12 sub
-   1 2 STCi_text length 1 sub {
-       STCi_text exch get dup length 0 gt {
-          STCi_l1 12 add 2 index moveto show
-       }{
-         pop
-       } ifelse
-       12 sub
-   } for
-   pop
-
-%
-%  compute the space for the graph-window
-%
-   STCi_l1 12 add STCi_l2 add 12 add dup STCi_clip 2 get exch sub % Extend
-   [ 3 -1 roll dup 3 index add STCi_clip 3 get dup 5 index sub 3 1 roll ]
-   /STCi_win exch def /STCi_l1 exch def
-
-% The "Axis"
-   newpath
-   STCi_win 0 get STCi_win 1 get 14 add moveto
-   STCi_win 2 get STCi_win 1 get 14 add lineto stroke
-
-   STCi_win 0 get 14 add STCi_win 1 get moveto
-   STCi_win 0 get 14 add STCi_win 3 get lineto stroke
-
-% The Labels
-   /Times-Roman findfont 10 scalefont setfont
-   (Postscript-color) dup stringwidth pop
-   STCi_win 2 get STCi_win 0 get sub 14 sub 1 index sub 2 div exch pop
-   STCi_win 0 get add 14 add STCi_win 1 get 4 add moveto show
-
-   gsave
-     STCi_win 0 get 10 add STCi_win 1 get 14 add translate 90 rotate
-     (Device-color) dup stringwidth pop
-     STCi_win 3 get STCi_win 1 get sub 14 sub 1 index sub 2 div exch pop
-     0 moveto show
-   grestore
-
-% The Graphs
-  gsave
-     STCi_win 0 get 14 add STCi_win 1 get 14 add
-     STCi_win 2 get 2 index sub STCi_win 3 get 2 index sub
-     4 2 roll translate
-     STCi_col 0 1 2 index length 1 sub {
-       1 index 1 index get aload pop setrgbcolor
-       STCi_xv 1 index get STCi_yv 3 -1 roll get
-       newpath
-       1 index 0 get 5 index mul 1 index 0 get 5 index mul moveto
-       1 index 1 get 5 index mul 1 index 0 get 5 index mul lineto
-       1 1 2 index length 1 sub {
-         2 index 1 index       get 6 index mul
-         2 index 2 index       get 6 index mul lineto
-         2 index 1 index 1 add get 6 index mul
-         2 index 2 index       get 6 index mul lineto
-         pop
-       } for
-       stroke pop pop
-     } for
-     pop pop pop
-  grestore
-
-%
-% Find lowest Y from Text or graph
-%
-   STCi_win 1 get  STCi_clip 3 get STCi_text length 2 div 12 mul sub
-   dup 2 index gt { pop } { exch pop } ifelse 12 sub
-
-%
-%  compute the upper bar-window
-%
-   /STCi_win [
-      STCi_clip 0 get 4 -1 roll 36 sub STCi_clip 2 get 1 index 36 add
-   ] def
-
-%
-% Draw the required number of graphs
-%
-   [{  % Monochrome
-      STCi_win STCi_xv 0 get {setgray} STCibar
-    }{ % RGB
-      STCi_win STCi_xv 0 get {0 0 setrgbcolor} STCibar
-      STCi_win dup 1 exch 1 get 47 sub put
-      STCi_win dup 3 exch 3 get 47 sub put
-      STCi_win STCi_xv 1 get {0 0 3 1 roll setrgbcolor} STCibar
-      STCi_win dup 1 exch 1 get 47 sub put
-      STCi_win dup 3 exch 3 get 47 sub put
-      STCi_win STCi_xv 2 get {0 0 3 2 roll setrgbcolor} STCibar
-    }{ % CMYK
-      STCi_win STCi_xv 0 get {0 0 0          setcmykcolor} STCibar
-      STCi_win dup 1 exch 1 get 47 sub put
-      STCi_win dup 3 exch 3 get 47 sub put
-      STCi_win STCi_xv 1 get {0 0 0 4 1 roll setcmykcolor} STCibar
-      STCi_win dup 1 exch 1 get 47 sub put
-      STCi_win dup 3 exch 3 get 47 sub put
-      STCi_win STCi_xv 2 get {0 0 0 4 2 roll setcmykcolor} STCibar
-      STCi_win dup 1 exch 1 get 47 sub put
-      STCi_win dup 3 exch 3 get 47 sub put
-      STCi_win STCi_xv 3 get {0 0 0 4 3 roll setcmykcolor} STCibar
-    }
-   ] STCimode
-
-   STCi_win 1 STCi_clip 1 get put
-   STCi_win dup 3 exch 3 get 47 sub put
-
-%
-% Plot either one or two Color-Triangles
-%
-   /ColorAdjustMatrix STCiget null ne STCi_onstc and {
-     STCi_win 0 get STCi_win 2 get add 2 div
-     [STCi_win 0 get STCi_win 1 get 3 index STCi_win 3 get ] colortri
-     mark /ColorAdjustMatrix dup STCiget currentdevice putdeviceprops pop
-     [1 index STCi_win 1 get STCi_win 2 get STCi_win 3 get ] colortri
-     pop
-   }{
-     STCi_win colortri
-   } ifelse
-   newpath clippath stroke
-} ifelse
-showpage
diff --git a/Master/tlpkg/tlgs/lib/stcolor.ps b/Master/tlpkg/tlgs/lib/stcolor.ps
deleted file mode 100644
index 096209fadba..00000000000
--- a/Master/tlpkg/tlgs/lib/stcolor.ps
+++ /dev/null
@@ -1,169 +0,0 @@
-% Copyright (C) 2001-2021 Artifex Software, Inc.
-% All Rights Reserved.
-%
-% This software is provided AS-IS with no warranty, either express or
-% implied.
-%
-% This software is distributed under license and may not be copied,
-% modified or distributed except as expressly authorized under the terms
-% of the license contained in the file LICENSE in this distribution.
-%
-% Refer to licensing information at http://www.artifex.com or contact
-% Artifex Software, Inc.,  1305 Grant Avenue - Suite 200, Novato,
-% CA 94945, U.S.A., +1(415)492-9861, for further information.
-%
-
-% stcolor.ps
-% Epson Stylus-Color Printer-Driver
-
-% The purpose of this file is to configure the stcolor-printer driver
-
-%
-% It is useless and dangerous to interpret the following code with anything
-% else than Ghostscript, so this condition is verified first. If this fails
-% a message is send to the output. If this message bothers you, remove it,
-% but I prefer to know why the device-setup failed.
-
-statusdict begin product end
-dup (Ghostscript) eq 1 index (Artifex Ghostscript) eq or
-exch (AFPL Ghostscript) eq or{
-
-% fetch the current device-parameters this is specific for Ghostscript.
-
-  /STCold currentdevice getdeviceprops .dicttomark def
-
-% Any Ghostscript-Driver has a Name, verify that the selected device is
-% stcolor, otherwise nothing than another message will be produced.
-
-  STCold /Name get (stcolor) eq {
-
-%
-% The main thing this file does, is to establish transfer-functions.
-% Here are two predefined arrays for 360x360Dpi and for 720x720DpI.
-% If resolution is 360x720 or 720x360 the average is used. You may
-% want to define other arrays here.
-%
-
-     /STCdeftransfer [ 0.0 1.0 ] def
-
-     /STCKtransfer360 [
-       0.0000 0.0034 0.0185 0.0377 0.0574 0.0769 0.0952 0.1147
-       0.1337 0.1540 0.1759 0.1985 0.2209 0.2457 0.2706 0.2949
-       0.3209 0.3496 0.3820 0.4145 0.4505 0.4907 0.5344 0.5840
-       0.6445 0.7093 0.8154 0.9816 0.9983 0.9988 0.9994 1.0000
-     ] def
-
-     /STCKtransfer720 [
-       0.0000 0.0011 0.0079 0.0151 0.0217 0.0287 0.0354 0.0425
-       0.0492 0.0562 0.0633 0.0700 0.0766 0.0835 0.0900 0.0975
-       0.1054 0.1147 0.1243 0.1364 0.1489 0.1641 0.1833 0.2012
-       0.2217 0.2492 0.2814 0.3139 0.3487 0.3996 0.4527 0.5195
-     ] def
-
-% compute the resolution
-
-     STCold /HWResolution get dup
-     0 get exch 1 get mul sqrt /STCdpi exch def
-
-% pick the colormodel
-     STCold /ProcessColorModel get /STCcolor exch def
-
-     mark % prepare stack for "putdeviceprops"
-
-% warn for BitsPerPixel=30 with fsrgb
-     STCcolor /DeviceRGB eq STCold /BitsPerPixel get 32 eq and
-     {
-       (%%[ stcolor.ps: inefficient RGB-setup, recommend BitsPerPixel=24 ]%%\n)
-       print
-      } if
-
-% if the Dithering-Method is default (gscmyk), change it to fscmyk
-% this is achieved by pushing a name/value-pair onto the stack
-% if the selected algorithm uses another ProcessColorModel, it is necessary
-% to change the Value of STCcolor according to the new algorithm.
-
-     STCold /Dithering get (gscmyk) eq
-     {
-        /Dithering (hscmyk) % preferred dithering-method
-     } if % might be necessary to change STCcolor too
-
-%
-% select the array according to the resolution
-%
-     STCdpi 359.0 lt
-     { STCdeftransfer }
-     { STCdpi 361.0 lt
-       { STCKtransfer360 }
-       { STCdpi 719.0 gt
-         { STCKtransfer720 }
-         {
-           STCKtransfer360 length STCKtransfer720 length eq
-           {
-             0 1 STCKtransfer360 length 1 sub
-             {
-               dup dup
-               STCKtransfer360 exch get
-               exch STCKtransfer720 exch get
-               add 2.0 div
-               STCKtransfer360 3 1 roll put
-             } for
-           }if
-           STCKtransfer360
-         } ifelse
-       }ifelse
-     } ifelse
-     /STCtransfer exch def
-
-%
-% Add the arrays. With Version 1.17 and above, it seems to be
-% a good idea, to use the transfer-arrays as coding-arrays too.
-%
-
-%
-% RGB-Model requires inversion of the transfer-arrays
-%
-     STCcolor /DeviceRGB eq
-     {
-        /RGBtransfer STCtransfer length array def
-        0 1 STCtransfer length 1 sub
-        {
-          dup RGBtransfer length 1 sub exch sub exch
-          STCtransfer exch get 1.0 exch sub
-          RGBtransfer 3 1 roll put
-        } for
-
-        /Rtransfer RGBtransfer
-        /Gtransfer RGBtransfer
-        /Btransfer RGBtransfer
-
-        /Rcoding   RGBtransfer
-        /Gcoding   RGBtransfer
-        /Bcoding   RGBtransfer
-
-     }{
-
-       /Ctransfer STCtransfer
-       /Mtransfer STCtransfer
-       /Ytransfer STCtransfer
-       /Ktransfer STCtransfer
-
-       /Ccoding   STCtransfer
-       /Mcoding   STCtransfer
-       /Ycoding   STCtransfer
-       /Kcoding   STCtransfer
-
-     } ifelse
-
-     counttomark 0 ne
-        {currentdevice putdeviceprops pop}{cleartomark}ifelse
-
-% decativate predefined correction
-
-     {} dup dup currenttransfer setcolortransfer
-
-  }{
-    (%%[ stcolor.ps: currentdevice is not stcolor - ignored ]%%\n) print
-  } ifelse
-}{
-  (%%[ stcolor.ps: not interpreted by AFPL Ghostscript - ignored ]%%\n) print
-} ifelse