we do not distribute chktex, so do not distribute its dot file either

git-svn-id: svn://tug.org/texlive/trunk@12256 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 0 insertions, 670 deletions

diff --git a/Master/texmf/chktex/.chktexrc b/Master/texmf/chktex/.chktexrc
deleted file mode 100644
index 71280bda5a0..00000000000
--- a/Master/texmf/chktex/.chktexrc
+++ /dev/null
@@ -1,670 +0,0 @@
-##
-##  ChkTeX, example resource file for ChkTeX.
-##  Copyright (C) 1995-96 Jens T. Berger Thielemann
-##
-##  This program is free software; you can redistribute it and/or modify
-##  it under the terms of the GNU General Public License as published by
-##  the Free Software Foundation; either version 2 of the License, or
-##  (at your option) any later version.
-##
-##  This program is distributed in the hope that it will be useful,
-##  but WITHOUT ANY WARRANTY; without even the implied warranty of
-##  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-##  GNU General Public License for more details.
-##
-##  You should have received a copy of the GNU General Public License
-##  along with this program; if not, write to the Free Software
-##  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-##
-##  Contact the author at:
-##      Jens Berger
-##      Spektrumvn. 4
-##      N-0666 Oslo
-##      Norway
-##      E-mail: <jensthi@ifi.uio.no>
-##
-
-#####################################################################
-#
-# Note:   The  format  has  changed  slightly  (again).  The { ...  }
-# syntax does now mean case-sensitive comparing, while [ ...  ] means
-# case-insensitive   comparing  of  the  keywords.   Case-insensitive
-# comparing  of  the  keywords  is  only  supported  on  a few of the
-# keywords  (it's not meaningful in all contexts, and it slows ChkTeX
-# down).  Keywords supporting this are marked throughout the file.
-#
-# You  may  also reset a list by saying "KEYWORD = { ...  }"; it will
-# then be set equal to the contents of the list you specify.
-#
-# Comments  begin  with  `#', and continues for the rest of the line.
-# Blank lines plus leading and trailing spaces are of course ignored.
-#
-# The general format of this file is the following:
-#
-# KEYWORD { item item ...} [ item item ... ] /* Adds items */
-#
-# KEYWORD [ item item ...] { item item ... } /* Adds items */
-#
-# KEYWORD = item
-#
-# KEYWORD = { item item ... } /* Clears list before adding */
-#
-# KEYWORD = [ item item ... ] /* Clears list before adding */
-#
-# This  does  _not_  mean  that  you may alternate the forms; certain
-# keywords  demands  a  list, other a single value.  You thus have to
-# look at the examples of their use.
-#
-# Please  also  note  that if you specify a list-keyword twice, we'll
-# concatenate  the  lists.   If you you specify a item-keyword twice,
-# we'll kill the previous value.
-#
-# We  are  slightly  context-sensitive when detecting tokens like "}"
-# and "]"; they have to be preceded by a space.  This generally makes
-# life easier.
-#
-# Items  are separated by spaces.  Newlines are considered as spaces,
-# but  can't be escaped.  You may surround items with quotes (`"') to
-# easily put spaces into them.
-#
-# Escape sequences available:
-#
-#   Sequence        Resulting character
-#   !               A space (type `! ', not just a exclamation mark)
-#   !"              "
-#   !#              #
-#   !!              !
-#   !{              {
-#   !}              }
-#   ![              [
-#   !]              ]
-#   !=              =
-#   !b              Backspace
-#   !n              New line
-#   !r              Carriage return
-#   !t              Tab
-#   !f              Form feed
-#   !xNN            NN must be a hexadecimal number (00 - ff),
-#                   _both_ characters must be included.
-#   !dNNN           DDD must be a decimal number (000 - 255), all
-#                   three characters must be included. Unspecified
-#                   results if DDD > 255.
-#   !NNN            DDD must be a octal number (000 - 377), all
-#                   three characters must be included. Unspecified
-#                   results if DDD > 377.
-#
-# Minor  note:   As  you  can see, most of these escape sequences are
-# equal  to  those  in  C  (with  some extensions); however, we use !
-# instead of \ as escape character for obvious reasons.
-#
-#
-# Quick summary of keywords follows.  Keywords marked with a * accept
-# keywords accepting case-insensitive lists.
-#
-#   Abbrev*     - A list of abbreviations not automatically catched.
-#   CenterDots  - Commands/characters  which  should  have  \cdots in
-#                 between.
-#   CmdLine     - Default   commandline   options.    These  will  be
-#                 processed  before  the ones you give on the command
-#                 line.
-#   HyphDash   \
-#   NumDash     - No. of dashes allowed in different contexts.
-#   WordDash   /
-#   IJAccent    - Commands   which   puts   an  accent  _over_  their
-#                 argument.
-#   Italic      - Commands immediately turning on italic mode.
-#   ItalCmd     - Commands putting their argument into italic.
-#   Linker      - Commands  which should have a non-breaking space in
-#                 front.
-#   LowDots     - Commands/characters  which  should  have  \ldots in
-#                 between.
-#   MathEnvir   - Environments which turn on math mode.
-#   MathRoman   - Mathematical   operators   with  LaTeX  replacement
-#                 defined.
-#   NoCharNext  - Insists on that certain commands aren't followed by 
-#                 certain characters.
-#   NonItalic   - Commands immediately turning off italic mode.
-#   NotPreSpaced- Commands  which should not have a space in front of
-#                 them.
-#   Primitives  - Primitive TeX commands.
-#   PostLink    - Commands which generates a page reference.
-#   OutFormat   - Formats  to use for output.  See the -f & -v switch
-#                 in the main doc.
-#   QuoteStyle  - Either  "Traditional"  or "Logical".  See main doc,
-#                 warning 38.
-#   Silent      - These  commands  do not produce any textual output;
-#                 and are thus allowed to have a space after them.
-#   TabSize     - Tab size you are using.
-#   TeXInputs   - Paths to search \input and \include files for.
-#   UserWarn*   - These  strings  will be searched for throughout the
-#                 text.
-#   VerbEnvir   - Environments which contents should be ignored.
-#   VerbClear   - String we will overwrite unwanted data with.
-#   WipeArg     - Commands  (with  arguments) which should be ignored
-#                 in the checking.
-#
-
-
-#####################################################################
-#
-# Enter which type of  quote-style you are using here.  Currently, we
-# support the following styles:
-#
-#  Style        Example of use
-#  Traditional  "An example," he said, "would be great."
-#  Logical      "An example", he said, "would be great".
-#
-
-QuoteStyle = Logical
-
-#####################################################################
-#
-# Enter  here what interval you have between your tabs.  Only regular
-# intervals are supported.
-#
-
-TabSize = 8
-
-#####################################################################
-#
-# Here, you can put default commandline options; most users would for
-# instance like to put -v2 here.
-#
-
-CmdLine
-{
-
-}
-
-#####################################################################
-#
-# These  patterns  will  be  searched for through the text; no matter
-# whether   they   appear  as  normal  text,  commands  or  whatever.
-# Currently case-sensitive.
-#
-# I usually define a special command like this:
-#
-# \def\unknown{\large\bf??}
-#
-# which  I use whenever there is some information I don't have at the
-# moment of writing.  Thus, it makes sense to search for it.
-#
-# You should be able to develop your own uses for this.
-#
-
-UserWarn
-{
-
-    \unknown
-###
-#
-# Another example; one should write \chktex or Chk\TeX - never ChkTeX.
-#
-###
-
-    ChkTeX
-}
-[
-
-###
-#
-# You may put case-insensitive patterns here.
-#
-###
-
-]
-
-#####################################################################
-#
-# Here you can list the path of where ChkTeX should look for files it
-# \inputs.   The  // postfix is now supported; if you append a double
-# path-separator we'll recursively search that directory directories.
-# MS-DOS users must append \\ instead, e.g.  "C:\EMTEX\\".
-#
-# If you under either MS-DOS or UNIX wish to search an entire
-# partition or the complete directory tree, you must use *three*
-# slashes, e.g. "c:\\\" or "///". This may be considered to be a bug.
-#
-# By  default,  we'll  search the current directory (not recursively,
-# put  "//"  in the list for this); any paths specified below will be
-# searched in addition to this.
-#
-
-TeXInputs
-{
-
-}
-
-#####################################################################
-#
-# Here you may specify more outputformats for use with the -v option,
-# it simply indexes  into this list.  Remember to use ! instead of \,
-# though.
-#
-# For explanation of how % fields expand; look at ChkTeX.{dvi,ps}.
-#
-# We will by default select entry number _two_ in this list (we count
-# from 0), and -v without any parameter selects entry number _three_.
-#
-
-OutFormat
-{
-
-# -v0; silent mode
-%f%b%l%b%c%b%n%b%m!n
-
-# -v1; normal mode
-"%k %n in %f line %l: %m!n%r%s%t!n%u!n"
-
-# -v2; fancy mode
-"%k %n in %f line %l: %m!n%r%i%s%I%t!n!n"
-
-# -v3; lacheck mode
-"!"%f!", line %l: %m!n"
-
-# -v4; verbose lacheck mode
-"!"%f!", line %l: %m!n%r%s%t!n%u!n"
-
-}
-
-
-
-#####################################################################
-#
-# These  commands  should be ignored when detecting whether a command
-# is ended by a space.
-#
-
-Silent
-{
-    \rm \em \bf \it \sl \sf \sc \tt \selectfont
-    \rmfamily \sffamily \ttfamily \mdseries \bfseries
-    \slshape \scshape \relax
-    \vskip \pagebreak \nopagebreak
-
-    \textrm \textem \textbf \textit \textsl \textsf \textsc \texttt
-
-    \clearpage \ddots \dotfill \flushbottom \fussy \indent \linebreak
-    \onecolumn \pagebreak \pushtabs \poptabs \scriptsize \sloppy
-    \twocolumn \vdots
-    \today \kill \newline \thicklines \thinlines
-
-    \columnsep \space \item \tiny \footnotesize \small \normalsize
-    \normal \large \Large \LARGE \huge \Huge \printindex
-
-    \newpage \listoffigures \listoftables \tableofcontents
-    \maketitle \makeindex
-
-    \hline \hrule \vrule
-
-    \centering
-
-    \bigskip \medskip \smallskip
-
-    \noindent \expandafter
-
-    \makeatletter \makeatother
-
-    \columnseprule
-
-    \textwidth \textheight \hsize \vsize
-
-    \if \fi
-
-    \csname \endcsname
-
-    \z@ \p@ \@warning \typeout
-
-    \dots \ldots \input \endinput \nextline \leavevmode \cdots
--    \appendix \listfiles \and \quad
-    \vfill \vfil \hfill \hfil \topmargin \oddsidemargin
-    \frenchspacing \nonfrenchspacing
-    \begingroup \endgroup \par
-
-    \vrefwarning \upshape \headheight \headsep \hoffset \voffset
-    \cdot \qquad
-    \left \right
-}
-
-#####################################################################
-#
-# Here,  you  can  specify the length of various dashes.  We sort the
-# dash according to which type of characters that are on the left and
-# right of of it.  We are only conclusive if they are the same.
-#
-# We associate as follows:
-#
-#     Name        Type of character on each side
-#     HyphDash    Alphabetic (foo-bar)
-#     NumDash     Numeric (2--3)
-#     WordDash    Space (like this --- see?)
-#
-# Below you specify how many dashes which are legal in each case.  We
-# define 0 as an magic constant which always generates an error.  You
-# may specify more than one legal dash-length.
-#
-# Let's look at an example.  You use the following dash-syntax:
-#
-#     foo-bar
-#     2--3
-#     like this---see?
-#
-#
-# HYPHDASH { 1 3 }        # Either a hyphen, or inter-word
-# NUMDASH { 2 }           # Between words
-# WORDDASH { 0 }          # We never use this
-#
-
-HyphDash
-{
-    1
-}
-
-NumDash
-{
-    2
-}
-
-WordDash
-{
-    3
-}
-
-#####################################################################
-#
-# This  keyword  indicates commands  which argument isn't LaTeX code,
-# and which thus should be ignored.
-#
-# After the  command,  you  may place arguments  that  you  wish that
-# should be  wiped in the process;  use [] for optional arguments, {}
-# for required  ones and *  if the  command  supports  an alternative
-# variant. These should be separated from the command with a colon.
-#
-# For  instance,  if  you would like to wipe the \newcommand command,
-# you would declare it as \newcommand:*[][]{}
-#
-# These  commands may be "executed" before they're wiped, so you will
-# typically also wish to list filehandling commands and similar here.
-#
-
-WipeArg
-{
-    \label:{} \ref:{} \vref:{} \pageref:{} \index:{} \cite:[]{}
-    \input:{} \verbatiminput:[]{} \listinginput:[]{}{}
-    \verbatimtabinput:[]{} \include:{} \includeonly:{} 
-    \bibitem:[]{}
-}
-
-#####################################################################
-#
-# These  environments  contains  material  which  will  be typeset as
-# mathematics by LaTeX.  This turns on/off some warnings.
-#
-# We will automagically append a * to each keyword.
-#
-
-MathEnvir
-{
-    displaymath math eqnarray array equation
-}
-
-#####################################################################
-#
-# These  environments  contains  material  which  contents  should be
-# ignored.
-#
-# We will automagically append a * to each keyword.
-#
-
-VerbEnvir
-{
-    verbatim comment listing verbatimtab rawhtml errexam picture texdraw
-}
-
-#####################################################################
-#
-# ChkTeX  does  automagically  catch  most abbreviations; the ones we
-# need  to  list here, are those which are most likely to be followed
-# by a word with an upper-case letter (that is not the beginning of a
-# new sentence).
-#
-# The case-insensitive abbreviations are not really case-insensitive,
-# it seems to be more  practical to  only let  the first character be
-# case-insensitive, while the remaining are case-sensitive.
-#
-# To  speed  up the searching process somewhat, we require that these
-# end in a `.', this should not be a problem.
-#
-# Much  of  this  work (both the abbreviations below, and the regexps
-# necessary  to catch the remaining automatically) have been provided
-# by Russ Bubley, <russ@scs.leeds.ac.uk>.
-#
-
-
-Abbrev
-{
-# Ordinals
-1st. 2nd. 3rd. 4th.
-# Titles
-Mr. Mrs. Miss. Ms. Dr. Prof. St.
-
-#
-# Days
-# Mon. Tue. Wed. Thu. Fri. Sat. Sun.
-#
-# Months
-# Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct. Nov. Dec.
-#
-# Letters
-# Kt. Jr.
-#
-# Corporate
-# Co. Ltd.
-#
-# Addresses
-# Rd. Dr. St. Ave. Cres. Gdns. Sq. Circ. Terr. Pl. Arc. La. Clo. Ho. Est. Gn.
-#
-# Misc.
-# oe. pbab. ps. rsvp. Tx.
-}
-[
-###
-#
-# The first letter is case-insensitive in the abbrevs in this
-# list. Due to the nature of the checking algorithm used for
-# this, entries consisting of only one character will be
-# silently ignored.
-#
-##
-
-# Latin
-# cf. "et al." etc. qed. qv. viz.
-#
-# Corporate
-# inc. plc.
-#
-# Misc
-# fax. pcs. qty. tel. misc.
-]
-
-#####################################################################
-#
-# Commands which accent characters, meaning that \i or \j (\imath and
-# \jmath in mathmode) should be used instead of `i' and `j'
-#
-
-IJAccent
-{
-    \hat \check \breve \acute \grave \tilde \bar \vec \dot \ddot
-
-    \' \` \^ \" \~ \= \. \u \v \H \t
-
-###
-#
-# The  remaining  accent commands (\c,\d,\b) put their accent _under_
-# the  character,  not above, and should thus be used with normal i's
-# and j's.
-#
-###
-
-}
-
-#####################################################################
-#
-# Commands   which,  when  the  group  is  terminated,  needs  italic
-# correction.
-#
-
-Italic
-{
-    \it \em \sl
-}
-
-#####################################################################
-#
-# Commands which makes the font non-italic.
-#
-
-NonItalic
-{
-    \bf \rm \sf \tt \sc
-}
-
-#####################################################################
-#
-# Commands   which puts their argument into italic (and thus possibly
-# needs italic correction in the end.
-#
-
-ItalCmd
-{
-    \textit \textsl \emph
-}
-
-#####################################################################
-#
-# These  commands  all have in common that a pagebreak right in front
-# of  them  is  highly  undesirable; thus there should be no space in
-# front of them.
-#
-
-PostLink
-{
-    \index \label
-}
-
-#####################################################################
-#
-# These commands should not have a space in front of them for various
-# reasons.   I.e.   much  the  same as POSTLINK, but produces another
-# warning.
-#
-
-NotPreSpaced
-{
-    \footnote \footnotemark \/
-}
-
-#####################################################################
-#
-# The  commands  listed  here,  should be prepended with a `~', as in
-# "look  in  table~\ref{foo}", to avoid the references being split
-# across lines.
-#
-
-Linker
-{
-    \ref \vref \pageref \cite
-}
-
-#####################################################################
-#
-# Commands/characters  which  should  have  \cdots  in  between, e.g.
-# $1+2+3+\cdots+n$.
-#
-
-CenterDots
-{
-    = + - \cdot \div & \times \geq \leq < >
-}
-
-#####################################################################
-#
-# Commands/characters  which  should  have  \ldots  in  between, e.g.
-# $1,2,3,\ldots,n$.
-#
-
-LowDots
-{
-    . , ;
-}
-
-#####################################################################
-#
-# In maths mode, there are certain aliases for mathematical operators
-# like  sin, cos, etc.  Ignore the leading backslash in the commands,
-# and so forth.  You should list these below.
-#
-
-MathRoman
-{
-    log lg ln lim limsup liminf sin arcsin sinh cos arccos cosh tan
-    arctan tanh cot coth sec csc max min sup inf arg ker dim hom det
-    exp Pr gcd deg bmod pmod mod
-}
-
-#####################################################################
-#
-# These TeX commands have become unnecessary, as there are LaTeX cmds
-# that does the same. Purists should thus avoid these in their code.
-#
-# (These are a spell-corrected version of those lacheck uses).
-#
-
-Primitives
-{
-   \above \advance \catcode \chardef \closein \closeout \copy \count
-   \countdef \cr \crcr \csname \delcode \dimendef \dimen \divide
-   \expandafter \font \hskip \vskip \openout
-}
-
-#####################################################################
-#
-# Format: \command:characters
-#
-# We'll emit a warning if any of characters are found after the 
-# command.
-#
-
-NoCharNext 
-{
-   \left:{}$ \right:{}$
-}
-
-#####################################################################
-#
-# We're killing \verb@...@ commands and the arguments of the commands
-# listed above in WIPEARG by overwriting them with a string or a
-# single character.
-#
-# This  should  not contain an alphabetic character (in case the user
-# writes (\foo\verb@bar@), neither should it contain be one of LaTeX'
-# reserved  characters  (`#$%&~_^\{}'),  or any parenthesis character
-# ('()[]{}').   If  possible,  don't  use  a  punctuation  character,
-# either, or any spacing character.
-#
-# The  asterix is also unsuitable, as some commands behave in another
-# way  if  they  are  postpended with an asterix.  Which more or less
-# leaves  us  with  the  pipe.
-#
-# Please  note  that  this  may  also  be  a  _string_, which will be
-# repeated until the proper length is reached.
-#
-
-VerbClear = "|"
-
-#
-# All for now - have fun.
-#
-#####################################################################
-