new latex package xpunctuate (24may12)

git-svn-id: svn://tug.org/texlive/trunk@26641 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 476 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/xpunctuate/README b/Master/texmf-dist/doc/latex/xpunctuate/README
new file mode 100644
index 00000000000..56d28e886f2
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/xpunctuate/README
@@ -0,0 +1,21 @@
+           --------------------------------------------------------
+           |  xpunctuate: a package to add punctuation, e.g. to   |
+           |              abbreviations, as and when necessary    |
+           |              (along the lines of xspace).            |
+           |                                                      |
+           |    Philip G. Ratcliffe - version 1.0 (2012/05/23)    |
+           --------------------------------------------------------
+
+* Copy xpunctuate.sty to one of your TeX input directories.
+
+* LaTeX xpunctuate.dtx for usage instructions and documentation.
+
+This is the first public release of the "xpunctuate" package; it defines 
+commands for typesetting, e.g., abbreviations where the trailing period may 
+clash with a sentence terminator.  More precisely it avoids the natural 
+problem of definitions such as \def\etc{\emph{etc}.}, which may then cause
+double periods if used at the end of sentences, such as ... cats, dogs \etc. 
+It also deals with optional commas, which again may be rendered unnecessary by
+the presence of a following sentence terminator. 
+
+Change history: v1.0 first official release.
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/xpunctuate/xpunctuate.pdf b/Master/texmf-dist/doc/latex/xpunctuate/xpunctuate.pdf
new file mode 100644
index 00000000000..f9dde3997f6
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/xpunctuate/xpunctuate.pdf
diff --git a/Master/texmf-dist/source/latex/xpunctuate/xpunctuate.dtx b/Master/texmf-dist/source/latex/xpunctuate/xpunctuate.dtx
new file mode 100644
index 00000000000..6aaabd61383
--- /dev/null
+++ b/Master/texmf-dist/source/latex/xpunctuate/xpunctuate.dtx
@@ -0,0 +1,326 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2012 by Philip G. Ratcliffe <philip.ratcliffe@uninsubria.it>
+%
+% This file may be distributed and/or modified under the conditions of
+% the LaTeX Project Public License, either version 1.2 of this license
+% or (at your option) any later version. The latest version of this
+% license is in:
+%
+%    http://www.latex-project.org/lppl.txt
+%
+% and version 1.2 or later is part of all distributions of LaTeX
+% version 1999/12/01 or later.
+%
+% \fi
+%
+% \iffalse
+%
+%<package>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+%<package>\ProvidesPackage{xpunctuate}
+%<package>   [2012/05/21 v1.0 trailing punctuation package (PGR)]
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{xpunctuate}
+\CodelineIndex
+\EnableCrossrefs
+\RecordChanges
+%
+\begin{document}
+  \DocInput{xpunctuate.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{144}
+%
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+%
+% \changes{v1.0}{2012/05/21}{first public release}
+%
+% \GetFileInfo{xpunctuate.sty}
+%
+% \DoNotIndex{\CodelineIndex,\EnableCrossrefs,\RecordChanges}
+%
+% \title{
+%   The \textsf{xpunctuate}\relax
+%   \thanks{
+%     This file has version number \fileversion, and revision date \filedate.}
+%   \space
+%   package for \LaTeX2e
+% }
+% \author{
+%   Philip G. Ratcliffe\thanks{E-mail: \textsf{philip.ratcliffe@uninsubria.it}}
+% \\
+%   Dipartimento di Scienze e Alta Tecnologia
+% \\
+%   Universit\`{a} degli Studi dell'Insubria---Como
+% }
+%
+% \date{}
+%
+% \maketitle
+%
+% \begin{abstract}
+% This package affords the user or package writer post-macro punctuation
+% insertion, \emph{i.e.}, beyond (but similar to) that of the |xspace| package.
+% Three new commands are defined: |\xperiod|, |\xcomma| and |\xperiodcomma|,
+% which, following a similar procedure to the standard |\xspace| macro, are
+% designed to insert the relevant punctuation \emph{if and only if} necessary.
+% \end{abstract}
+%
+% \section{Introduction}
+%
+% The present package is mainly intended for package writers and provides
+% additional post-macro punctuation insertion, similar to that of the |xspace|
+% package. Three new commands are defined: |\xperiod|, |\xcomma| and
+% |\xperiodcomma|, which, in an analogous fashion to the standard |\xspace|
+% macro, insert the relevant punctuation where necessary.
+%
+% \section{Usage}
+%
+% The package is loaded via a standard package call: |\usepackage{xpunctuate}|.
+% There are at present no user options.
+%
+% \subsection{User commands}
+%
+% The package defines three user commands, each having two variants.
+%
+% \DescribeMacro{\xperiod}
+% The purpose of this macro is to insert a period if not found as the
+% successive \LaTeX\ input token. Typical use will be in defining
+% abbreviations, where there may or may not be a following ``accidental''
+% sentence-terminating period. The definition of |\xperiod| is such that if it
+% is followed by a period, then this is considered as a sentence terminator and
+% the appropriate trailing space is inserted. However, when no explicit period
+% follows, the occurrence is assumed to be mid-sentence and therefore normal
+% inter-word spacing is used.
+%
+% \DescribeMacro{\xcomma}
+% The purpose of this macro is to insert a comma if not found as the next
+% token. Typical use will be following an object such as ``\emph{e.g.}'', which
+% according to certain standard style manuals should be followed by a comma.
+% This command has no special spacing behaviour.
+%
+% \DescribeMacro{\xperiodcomma}
+% The purpose of this macro is to insert a period \emph{and} comma if not found
+% as the next input tokens. Typical use will be, as above, following an object
+% such as ``\emph{e.g.}'', which, according to certain style manuals, should be
+% followed by a comma, but may also occur fortuitously immediately preceding an
+% explicit sentence-closing period, the correct trailing space of which would
+% then be inserted.
+%
+% \DescribeMacro{\xperiodafter}
+% \DescribeMacro{\xcommaafter}
+% \DescribeMacro{\xperiodcommaafter}
+% These variants are similar to the above macros except that they take the word
+% or words to be punctuated as an argument; this avoids incorrect spacing
+% adjustment when the word is, for example, |\emph|'asised.
+%
+% Note that the action of |\xperiodcommaafter| may also obtained by suitably
+% nesting |\xperiodafter| and |\xcommaafter| though this has not been
+% thoroughly tested; it is thus included for safety and backward compatibility.
+%
+% The following are examples of possible usage:\\[2ex]
+% |\DeclareRobustCommand\etal{\xperiodafter{\emph{et al}}}| \\
+% |\DeclareRobustCommand\eg{e.g\xperiodcomma}| \\
+% |\DeclareRobustCommand\eg{\xcommaafter{\xperiodafter{\emph{e.g}}}}|
+%
+% \subsection{Caveats}
+%
+% No particular care should be necessary in using the commands defined by this
+% package. However, trailing punctuation hidden inside macro definitions may
+% not be correctly interpreted.
+%
+% \subsection{External package requirements}
+%
+% The |xspace| package is required and is loaded automatically.
+%
+% \subsection{Package conflicts}
+%
+% There are no known conflicts with any standard \LaTeX2e\ packages.
+%
+% \StopEventually{\PrintChanges\PrintIndex}
+%
+% \section{Implementation}
+%
+% \subsection{External package requirements}
+%
+% Load the |xspace| package for automatic trailing space:
+%    \begin{macrocode}
+\RequirePackage{xspace}
+%    \end{macrocode}
+%
+% \subsection{User commands}
+%
+% \begin{macro}{\xperiod}
+% The following macro inserts a period if this is not found to be the next
+% character. It may thus be used to construct common abbreviations (such as
+% ``\emph{etc}.'').
+%    \begin{macrocode}
+\DeclareRobustCommand\xperiod{\xprd@Set{}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xperiodafter}
+% This macro takes one argument and places a period after it if this is not
+% found to be the next character. The correct spacing between the word and
+% period is thus maintained in the case of, say, |\emph|.
+%    \begin{macrocode}
+\DeclareRobustCommand\xperiodafter[1]{\xprd@Set{#1}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xcomma}
+% The following macro inserts a comma if this is not found to be the next
+% character. Thus, it may be used to construct common abbreviations and
+% expressions that should normally be followed by a comma (such as
+% ``\emph{e.g.}'').
+%    \begin{macrocode}
+\DeclareRobustCommand\xcomma{\xcmm@Set{}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xcommaafter}
+% The following macro takes one argument and places a comma after it if this is
+% not found to be the next character. 
+%    \begin{macrocode}
+\DeclareRobustCommand\xcommaafter[1]{\xcmm@Set{#1}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xperiodcomma}
+% The following macro first adds a period and then a comma if these are not
+% found to be the next characters.
+%    \begin{macrocode}
+\DeclareRobustCommand\xperiodcomma{\xpcm@Set{}}
+%    \end{macrocode}
+% It may thus be used to construct common abbreviations that should normally be
+% followed by a comma (such as ``\emph{e.g.}''). The comma is inserted if only
+% and if the following character does not imply the end of a period. Here, of
+% course, there is no problem of spacing either preceding or following the
+% period. If only a period is found this is treated as an end-of-sentence and
+% the spacing is handled accordingly.
+% \end{macro}
+%
+% \begin{macro}{\xperiodcommaafter}
+% This macro takes one argument and places a period and a comma after it if
+% these are not found to be the next characters:
+%    \begin{macrocode}
+\DeclareRobustCommand\xperiodcommaafter[1]{\xpcm@Set{#1}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Internal macros}
+%
+% \begin{macro}{\xprd@Set}
+% The setup for |\xperiod| and |\xperiodafter| is performed by the following
+% auxiliary macro:
+%    \begin{macrocode}
+\newcommand\xprd@Set[1]{\def\xprd@Obj{#1}\futurelet\xprd@Nxt\xprd@Fin}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xprd@Fin}
+% The testing and final output for |\xperiod| and |\xperiodafter| is made by
+% the following auxiliary macro:
+%    \begin{macrocode}
+\newcommand\xprd@Fin{%
+  \ifx\xprd@Nxt.\relax
+    \let\xprd@Out\xprd@Obj
+  \else
+    \def\xprd@Out{\xprd@Obj.\@\xspace}%
+  \fi
+  \xprd@Out
+}
+%    \end{macrocode}
+% Note the insertion of ``|\@|'' following the period when this last is not
+% found; this avoids the standard default end-of-sentence spacing, assuming the
+% occurrence in such a case to be mid-sentence.
+% \end{macro}
+%
+% \begin{macro}{\xcmm@Set}
+% The setup for |\xcomma| and |\xcommaafter| is performed by the following
+% auxiliary macro:
+%    \begin{macrocode}
+\newcommand\xcmm@Set[1]{\def\xcmm@Obj{#1}\futurelet\xcmm@Nxt\xcmm@Fin}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xcmm@Fin}
+% The testing and final output for |\xcomma| and |\xcommaafter| is made by the
+% following auxiliary macro (shamelessly copied from an \emph{old} |xspace| and
+% hacked):
+%    \begin{macrocode}
+\newcommand\xcmm@Fin{%
+  \let\xcmm@Out\xcmm@Obj
+  \ifx\xcmm@Nxt\bgroup\else
+  \ifx\xcmm@Nxt\egroup\else
+  \ifx\xcmm@Nxt\/\else
+  \ifx\xcmm@Nxt~\else
+  \ifx\xcmm@Nxt.\else
+  \ifx\xcmm@Nxt!\else
+  \ifx\xcmm@Nxt,\else
+  \ifx\xcmm@Nxt:\else
+  \ifx\xcmm@Nxt;\else
+  \ifx\xcmm@Nxt?\else
+  \ifx\xcmm@Nxt/\else
+  \ifx\xcmm@Nxt'\else
+  \ifx\xcmm@Nxt)\else
+  \ifx\xcmm@Nxt]\else
+  \ifx\xcmm@Nxt-\else
+    \def\xcmm@Out{\xcmm@Obj,\xspace}%
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \xcmm@Out
+}
+%    \end{macrocode}
+% Note that there are fewer options than in the |xspace| package, for obvious
+% reasons.
+% \end{macro}
+%
+% \begin{macro}{\xpcm@Set}
+% The setup for |\xperiodcomma| and |\xperiodcommaafter| is performed by the
+% following auxiliary macro:
+%    \begin{macrocode}
+\newcommand\xpcm@Set[1]{\def\xpcm@Obj{#1}\futurelet\xpcm@Nxt\xpcm@Fin}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\xpcm@Fin}
+% The testing and final output for |\xperiodcomma| and |\xperiodcommaafter| is
+% made by the following auxiliary macro:
+%    \begin{macrocode}
+\newcommand\xpcm@Fin{%
+  \ifx\xpcm@Nxt.\relax
+    \let\xpcm@Out\xpcm@Obj
+  \else
+    \def\xpcm@Out{\xpcm@Obj.\xcomma}%
+  \fi
+  \xpcm@Out
+}
+%    \end{macrocode}
+% The choice made is that if only a following period is found, then it is
+% treated as an end-of-sentence and the trailing space is handled accordingly.
+% \end{macro}
+%
+% \Finale
+%
+\endinput
+%%
+%% End of file `xpunctuate.dtx'.
\ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/xpunctuate/xpunctuate.ins b/Master/texmf-dist/source/latex/xpunctuate/xpunctuate.ins
new file mode 100644
index 00000000000..48dd28c23ef
--- /dev/null
+++ b/Master/texmf-dist/source/latex/xpunctuate/xpunctuate.ins
@@ -0,0 +1,56 @@
+%%
+%% Copyright (C) 2012 by Philip G. Ratcliffe <philip.ratcliffe@uninsubria.it>
+%%
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.2 of this license
+%% or (at your option) any later version.  The latest version of this
+%% license is in:
+%%
+%%    http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%%
+\input docstrip
+\keepsilent
+\usedir{tex/latex/xpunctuate}
+\preamble
+
+Copyright (C) 2012 by Philip G. Ratcliffe <philip.ratcliffe@uninsubria.it>
+
+This file may be distributed and/or modified under the conditions of
+the LaTeX Project Public License, either version 1.2 of this license
+or (at your option) any later version.  The latest version of this
+license is in:
+
+   http://www.latex-project.org/lppl.txt
+
+and version 1.2 or later is part of all distributions of LaTeX
+version 1999/12/01 or later.
+
+\endpreamble
+
+\generateFile{xpunctuate.sty}{n}{\from{xpunctuate.dtx}{package}}
+
+\ifToplevel{
+\Msg{*************************************************************}
+\Msg{*}
+\Msg{* To finish the installation, move the following file into a}
+\Msg{* directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space xpunctuate.sty }
+\Msg{*}
+\Msg{* To produce the documentation, run xpunctuate.dtx through LaTeX.}
+\Msg{* To produce a documentation index, run makeindex like this:}
+\Msg{*   \space\space makeindex -s gind.ist xpunctuate}
+\Msg{* To produce a history of changes, run makeindex like this:}
+\Msg{*   \space\space makeindex -s gglo.ist -o xpunctuate.gls xpunctuate.glo}
+\Msg{* Finally, run `xpunctuate.dtx' through LaTeX again.}
+\Msg{*}
+\Msg{* Happy LaTeXing}
+\Msg{*************************************************************}
+}
+
+\endbatchfile
+%%
+%% End of file `xpunctuate.ins'.
\ No newline at end of file
diff --git a/Master/texmf-dist/tex/latex/xpunctuate/xpunctuate.sty b/Master/texmf-dist/tex/latex/xpunctuate/xpunctuate.sty
new file mode 100644
index 00000000000..a0768f655f2
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/xpunctuate/xpunctuate.sty
@@ -0,0 +1,73 @@
+%%
+%% This is file `xpunctuate.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% xpunctuate.dtx  (with options: `package')
+%% 
+%% Copyright (C) 2012 by Philip G. Ratcliffe <philip.ratcliffe@uninsubria.it>
+%% 
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.2 of this license
+%% or (at your option) any later version.  The latest version of this
+%% license is in:
+%% 
+%%    http://www.latex-project.org/lppl.txt
+%% 
+%% and version 1.2 or later is part of all distributions of LaTeX
+%% version 1999/12/01 or later.
+%% 
+\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+\ProvidesPackage{xpunctuate}
+   [2012/05/21 v1.0 trailing punctuation package (PGR)]
+\RequirePackage{xspace}
+\DeclareRobustCommand\xperiod{\xprd@Set{}}
+\DeclareRobustCommand\xperiodafter[1]{\xprd@Set{#1}}
+\DeclareRobustCommand\xcomma{\xcmm@Set{}}
+\DeclareRobustCommand\xcommaafter[1]{\xcmm@Set{#1}}
+\DeclareRobustCommand\xperiodcomma{\xpcm@Set{}}
+\DeclareRobustCommand\xperiodcommaafter[1]{\xpcm@Set{#1}}
+\newcommand\xprd@Set[1]{\def\xprd@Obj{#1}\futurelet\xprd@Nxt\xprd@Fin}
+\newcommand\xprd@Fin{%
+  \ifx\xprd@Nxt.\relax
+    \let\xprd@Out\xprd@Obj
+  \else
+    \def\xprd@Out{\xprd@Obj.\@\xspace}%
+  \fi
+  \xprd@Out
+}
+\newcommand\xcmm@Set[1]{\def\xcmm@Obj{#1}\futurelet\xcmm@Nxt\xcmm@Fin}
+\newcommand\xcmm@Fin{%
+  \let\xcmm@Out\xcmm@Obj
+  \ifx\xcmm@Nxt\bgroup\else
+  \ifx\xcmm@Nxt\egroup\else
+  \ifx\xcmm@Nxt\/\else
+  \ifx\xcmm@Nxt~\else
+  \ifx\xcmm@Nxt.\else
+  \ifx\xcmm@Nxt!\else
+  \ifx\xcmm@Nxt,\else
+  \ifx\xcmm@Nxt:\else
+  \ifx\xcmm@Nxt;\else
+  \ifx\xcmm@Nxt?\else
+  \ifx\xcmm@Nxt/\else
+  \ifx\xcmm@Nxt'\else
+  \ifx\xcmm@Nxt)\else
+  \ifx\xcmm@Nxt]\else
+  \ifx\xcmm@Nxt-\else
+    \def\xcmm@Out{\xcmm@Obj,\xspace}%
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \xcmm@Out
+}
+\newcommand\xpcm@Set[1]{\def\xpcm@Obj{#1}\futurelet\xpcm@Nxt\xpcm@Fin}
+\newcommand\xpcm@Fin{%
+  \ifx\xpcm@Nxt.\relax
+    \let\xpcm@Out\xpcm@Obj
+  \else
+    \def\xpcm@Out{\xpcm@Obj.\xcomma}%
+  \fi
+  \xpcm@Out
+}
+\endinput
+%%
+%% End of file `xpunctuate.sty'.