rm fltpage, unclear license

git-svn-id: svn://tug.org/texlive/trunk@24910 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 0 insertions, 809 deletions

diff --git a/Master/texmf-dist/source/latex/fltpage/fltpage.dtx b/Master/texmf-dist/source/latex/fltpage/fltpage.dtx
deleted file mode 100644
index a56fea64c2d..00000000000
--- a/Master/texmf-dist/source/latex/fltpage/fltpage.dtx
+++ /dev/null
@@ -1,722 +0,0 @@
-% ^^A -----------------------------
-% \iffalse
-% File: fltpage.dtx
-%
-%  Copyright (C) [1998] by Sebastian Gross.  All rights reserved.
-% \fi
-% ^^A -----------------------------
-%
-% \iffalse
-% IMPORTANT NOTICE:
-%
-% This is a tool or better yet, an experiments written by Sebastian Gross
-% (seppel@zedat.fu-berlin.de), who is writing this not only for it utility
-% value, but as part of the process of learning LaTeX.  This utility is far
-% from perfect, and comments are welcome.
-%
-% The usual disclaimers apply:  If it doesn't work right that's your problem!
-%
-% The usual GNU-style conditions apply: If you change it, you take
-% the blame; if you pass it on, pass on all present conditions;
-%
-% For error reports in case of UNCHANGED versions see fltpage.ins
-% \fi
-%
-% ^^A -----------------------------
-% \CheckSum{309}
-%%
-%% \iffalse meta-comment
-%% ===================================================================
-%%  @LaTeX-package-file{
-%%     author     = {Sebastian Gross},
-%%     version    = {0.3},
-%%     date       = {13 Nov 1998},
-%%     filename   = {fltpage.dtx},
-%%     email      = {seppel@zedat.fu-berlin.de},
-%%     codetable  = {ISO/ASCII},
-%%     keywords   = {LaTeX2e, float, table, figure, caption, FPfigure, FPtable},
-%%     supported  = {yes},
-%%     docstring  = {LaTeX package which defines new environments to place
-%%                   captions of tables and figures on the facing/following page.}
-%%  }
-%% ===================================================================
-%% \fi
-%
-% ^^A -----------------------------
-%
-%  \def\fileversion{0.3}
-%  \def\filedate{1998/10/29}
-%  \newcommand{\docdate}{1998/11/13}
-%  \newcommand{\fp}{\textsf{fltpage}}
-%
-%  \newenvironment{options}[1]%
-%  {\begin{list}{}{\renewcommand{\makelabel}[1]{\texttt{##1}\hfil}%
-%     \settowidth{\labelwidth}{\texttt{#1\space}}%
-%     \setlength{\leftmargin}{\labelwidth}%
-%     \addtolength{\leftmargin}{\labelsep}%
-%     \setlength{\topsep}{0pt}%
-%     \setlength{\itemsep}{0pt}%
-%     \setlength{\parsep}{0pt}%
-%     \setlength{\partopsep}{0pt}}}%
-%  {\end{list}\vspace{4pt}}
-%  \setlength{\parskip}{4pt plus2pt minus1pt}
-%  \setlength{\parindent}{0pt}
-%  \newcommand*{\pkg}[1]{\textsf{#1}}
-%  \newcommand*{\cls}[1]{\textsf{#1}}
-%
-% ^^A -----------------------------
-%
-%  \changes{v0.3}{1998/10/29}{Added option noHints}
-%  \changes{v0.2}{1998/10/28}{Resolved the problem of accessible Variables}
-%  \changes{v0.1}{1998/10/07}{First private version}
-%
-%
-% \title{Welcome to the beta test of \fp\thanks{Sorry for the crippled name
-%        \fp! I just did not have a better and compelling idea.}\ ~package!}
-%  \author{Sebastian Gross\thanks{e-mail: \texttt{seppel@zedat.fu-berlin.de}.}}
-%  \date{beta \fileversion\ -- \docdate}
-%  \maketitle
-%
-% ^^A -----------------------------
-%
-%  \begin{abstract}
-%    This package defines the new environments |FPfigure| and |FPtable|,
-%    analogous to |figure| and |table|.  In |twoside| mode the caption will
-%    be set on the opposite page of a figure/table which needs a whole page.
-%    In |oneside| mode the caption will be set on the preceding or following
-%    page.
-%  \end{abstract}
-%
-%  \pagestyle{headings}
-%
-% ^^A -----------------------------
-%
-%  \section{Introduction}
-%
-%  In some cases, there is just enough space to place a figure or table on a page,
-%  unfortunately there is no space left for the caption below or above.
-%  Moreover, it is might be impossible to decrease the size (for example, due to a
-%  fixed scale of a map) or the use of \pkg{longtable} is inappropriate.
-%  In these (rare) cases it seems acceptable to place the caption on the opposite
-%  page in |twoside| mode or on the preceding/following page in |oneside| mode.
-%  For this purpose the package \fp\ provides the new environments |FPfigure|
-%  and |FPtable| in the sense of `generic markup'.  The basic idea is to use
-%  two floats, which follow directly and contain the figure/table and the caption
-%  respectively.  For correct positioning on odd or even pages in |twoside| mode
-%  at least two compilation runs are required.
-%
-% ^^A -----------------------------
-%
-%  \section{Usage}
-%
-%  \changes{v0.1}{1998/10/07}{First options introduced}
-%
-%  To use this package just type in the preamble of your document\\
-%  \hspace*{1cm} |\usepackage[|\meta{option}|]{fltpage}|.
-%
-%  The order of caption and figure/table are controlled one of the following options:
-%  \begin{options}{closeFloats}
-%   \item[closeFloats]
-%    the float using the whole page is placed on the next page.
-%    When the current page is even the caption is placed on the bottom,
-%    when it is odd the caption is placed at the bottom of the page after the
-%    float.  In any case the caption appears on opposite page in |twoside|
-%    mode of document or the page before in |oneside| mode.
-%   \item[rightFloats, CaptionBefore]
-%    the big float appears always on the right page and the caption afterwards.
-%   \item[leftFloats, CaptionAfterwards]
-%    the big float appears always on the left page and the caption afterwards.
-%  \end{options}
-%
-%  To distinguish the `isolated' caption from the text a separator line:
-%  \begin{options}{closeFloats}
-%   \item[noSeparatorLine]
-%     With this option the the separator will be suppressed
-%  \end{options}
-%
-%  To clarify the connection of caption to the float on an other page it might
-%  be helpful to give a hint like `Fig. N (on the facing page):'.  The following
-%  options control, how this is implemented:
-%  \begin{options}{closeFloats}
-%   \item[german]
-%    So far only German is implemented as other language.
-%   \item[varioref]
-%    Reference texts are already implemented for many languages in the standard
-%    package |varioref|, which implements slightly different expressions, too.
-%    With this option these texts will be used.
-%  \changes{v0.3}{1998/10/29}{new option}
-%   \item[noHints]
-%    When this option is used, any hint from the float caption to the float is
-%    disabled.
-%  \end{options}
-%
-%  Moreover the following global options (probably declared with the document
-%  class) will be evaluated:
-%  \begin{options}{closeFloats}
-%   \item[draft]
-%    causes placing of margin notes, where in the running text the one of the
-%    new environments is inserted.
-%   \item[oneside, twoside]
-%    just to decide mode of document\dots
-%  \end{options}
-%
-% \begin{macro}{FPfigure}
-% \begin{macro}{FPtable}
-%  In your Document you simply use the new environments instead of the standard
-%  environments |table| or |figure| with the usual |\begin{}| and |\end{}| commands:\\
-%  \hspace*{1cm}  |\begin{FPtable} ... \end{FPtable}|
-%  \\
-%  \hspace*{1cm}  |\begin{FPfigure} ... \end{FPfigure}|
-% \end{macro}
-% \end{macro}
-%  Be sure that there are not more than one or two `small' pending floats, otherwise
-%  the results will become unpredictable.  Moreover you should not use more than one
-%  of the new environment on a page.  The contents of the second will probably
-%  overwrite the contents of the first!
-%
-%  \paragraph{Example}
-%  \changes{v0.3}{1998/11/06}{Example inserted}
-%  The following example will produce a caption below and an almost empty facing
-%  page:\\
-%  \begin{FPfigure}
-%   \caption{A caption alone on a page will belong to the
-%            following figure without a caption!}
-%   \fbox{\rule[-10cm]{0pt}{\textheight}Frame symbolizing figure on a whole page.\hspace{5cm}}
-%  \end{FPfigure}
-%  \hspace*{08mm} |\usepackage[rightFloats]{fltpage}|\\
-%  \hspace*{10mm} |...|\\
-%  \hspace*{10mm} |\begin{FPfigure}|\\
-%  \hspace*{12mm} |\caption{A caption alone ... figure without a caption!}|\\
-%  \hspace*{12mm} |\fbox{\rule[-10cm]{0pt}{\textheight}Frame ... page.\hspace{5cm}}|\\
-%  \hspace*{10mm} |\end{FPfigure}|
-%
-% ^^A -----------------------------
-%
-%  \subsection{Requirements}
-%
-%  The present version of \fp\ (v.\fileversion) has been developed
-%  and tested with \LaTeXe{} of 1998/06/01 using em\TeX~4b running \TeX~3.14159
-%  under Windows~3.1, using the \cls{article} document class.
-%  It requires
-%  the standard \LaTeX\ package \pkg{ifthen} vers.\,1.0n of 1997/11/02
-%  and \pkg{tools} package \pkg{afterpage} vers.\,1.08 of 1995/10/27.
-%  Maybe it will work with older versions, maybe not\dots
-%
-%  With the option |varioref| the \pkg{tools} package \pkg{varioref} is
-%  needed, as well.
-%
-% ^^A -----------------------------
-%
-%  \subsection{Compatibility}
-%
-%  This package was developed and tested with following versions of the
-%  other packages:
-%  \begin{center} \begin{tabular}{lll}
-%   package           & version & date \\\hline
-%   \pkg{sidecap}  & 1.00    & 1997/05/08 \\
-%   \pkg{caption}  & 1.4b    & 1995/04/05 \\
-%   \pkg{booktabs} & 1.00    & 1995/11/06 \\
-%  \end{tabular} \end{center}
-%  Again it may work with older versions or not\dots
-%
-% ^^A -----------------------------
-%
-%  \section{Known problems and limitations}
-%
-%  This package is rather a quick and dirty solution to a problem than a
-%  sophisticated mechanism for placing captions and floats.  It should be
-%  regarded as an experiment, rather than a utility.  It was written by
-%  Sebastian Gross not only for it utility value, but as part of the process
-%  of learning LaTeX.   Therefore it is far from being perfect, and comments
-%  are welcome.   Your remarks and ideas are welcome to improve the concept
-%  and implementation in future releases.
-%
-%  Probably most problems will arose from pending floats, which should be
-%  cleared with |\clearpage|.  So far, no attempt is done!
-%
-%  When unpredicted suites of caption and floats result, you must \emph{first}
-%  assure two compilations of your document.
-%  An unresolved problem happens for example when the current page is even and
-%  the caption should be placed on the bottom of the page, but there is not
-%  enough space for it.  It will be moved to the next page (odd) and the long
-%  float will be on next even page, which means caption and float are
-%  separated!  To inquire this problem the option |draft| is provided, which
-%  causes the a margin note, where the FPfloat was inserted in the text.
-%
-%  The simple design employed does not allow any floats on the odd text page
-%  following the big float before the caption is resolved.
-%
-%  Also there is no solution implemented, when two of the new environments
-%  occur within a short interval.  This is especially dangerous when they
-%  are called on one page:  The contents of the second will overwrite the
-%  contents of the first!
-%
-%  In some cases the capacity of \TeX\ might be exceeded (main memory).
-%  This happens for example, when the table itself is too big.  It is
-%  assumed that tables included by files up to approximately 30\,KB will
-%  fill one page, even with |\tiny|.   Though, bigger tables may be included
-%  with the standard |table| environment\dots
-%
-%  This package does not work correctly with the \pkg{showkeys} package.
-%  Apparently the behaviour of the |\isodd{}| command of the standard
-%  \pkg{ifthen} package is disabled.
-%
-% ^^A -----------------------------
-%
-%  \section{Acknowlegments}
-%
-%  This package was partly based on the contributions to |de.comp.text.tex|,
-%  particulary of Hans Steffani, Heiko Oberdiek, Martin Schr\"oder, Stefan Ulrich.
-%  I have to admit, the exploitation of  Rolf Niepraschk's \pkg{sidecap}
-%  package, especially how to write a documented style file.
-%
-% ^^A -----------------------------
-%
-%  \section{The documentation driver file}
-%
-%  The next bit of code contains the documentation driver file for \TeX\, i.\,e.,
-%  the file that will produce the documentation you are currently reading.
-%  It will be extracted from this file by the \cls{docstrip} program.
-%    \begin{macrocode}
-%<*driver>
-\documentclass{ltxdoc}
-\setlength\hfuzz{5pt}    % ignore small overfull boxes
-\GetFileInfo{fltpage.sty}
-%\CodelineIndex
-%\EnableCrossrefs    % Will prepare and index
-%\DisableCrossrefs   % Say \DisableCrossrefs if index is ready
-%\OnlyDescription    % comment out for implementation details
-%\RecordChanges      % Gather update information
-\usepackage[rightFloats]{fltpage}
-\MakeShortVerb{\|}
-\begin{document}
-   \DocInput{fltpage.dtx}
-\end{document}
-%</driver>
-%    \end{macrocode}
-%
-% ^^A -----------------------------
-%
-%  \StopEventually{}
-%  \section{The implementation}
-%
-%  \subsection{File and Package Identification}
-%
-%    \begin{macrocode}
-%<*package>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{fltpage}[1998/10/29 v.0.3 Floats on full page (SMU)]
-%    \end{macrocode}
-%
-%  \subsection{Necessary files}
-%
-%    \begin{macrocode}
-\RequirePackage{ifthen}
-\RequirePackage{afterpage}
-%    \end{macrocode}
-%
-%  \subsection{Some internal variables and macros}
-%
-% \begin{macro}{FP@figureC}
-% \begin{macro}{FP@tableC}
-%  Two counters to store the number of instantiations, used to create unique labels:
-%    \begin{macrocode}
-\newcounter{FP@figureC}
-\newcounter{FP@tableC}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\FP@floatCorpusBOX}
-%  To store the actual figure or table we will use a box:
-%    \begin{macrocode}
-\newsavebox{\FP@floatCorpusBOX}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\FP@guide}
-% \begin{macro}{\FP@guideStyle}
-% \begin{macro}{\FP@guideOneside}
-% \begin{macro}{\FP@guideTwoside}
-% \begin{macro}{\FP@guideAfter}
-% \begin{macro}{\FP@guideBefore}
-% \begin{macro}{\FP@guideFaceBefore}
-% \begin{macro}{\FP@guideFaceAfter}
-%  To clarify the connection of caption to the float on other page it might be
-%  helpful to give a hint with the macro |\FP@guide|.  The macro |\FP@guideStyle|
-%  contains the appropriate style options. The |\FP@guideAfter|,
-%  |\FP@guideFaceAfter|, and |\FP@guideFaceAfter| contain the the default text
-%  strings:
-%    \begin{macrocode}
-\newcommand*{\FP@guide}{}%
-\newcommand*{\FP@guideStyle}{\slshape}
-\newcommand*{\FP@guideOneside}{following page}
-\newcommand*{\FP@guideTwoside}{facing page}
-\newcommand*{\FP@guideAfter}{following page}
-\newcommand*{\FP@guideBefore}{preceding page}
-\newcommand*{\FP@guideFaceBefore}{preceding page}
-\newcommand*{\FP@guideFaceAfter}{following page}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\FP@separatorCaption}
-%  To distinguish the caption on the separate page better from the text, we define
-%  a separator:
-%    \begin{macrocode}
-\newcommand*{\FP@separatorCaption}{\rule{\linewidth}{.4pt}}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\FP@positionLabel}
-%  To get information about the page we need some unique labels
-%    \begin{macrocode}
-\newcommand{\FP@positionLabel}{FP\@captype-\number\value{FP@\@captype C}-pos}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\FP@helpNote}
-%  For debugging the following messages are displayed helping to identify the
-%  position of an |FPfigure| resp.\ |FPtable|.
-%    \begin{macrocode}
-\newcommand{\FP@helpNote}[2]{%
-  \typeout{FP#1 is inserted on page \pageref{#2}!}}%
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\FP@float}
-% \begin{macro}{\FP@floatOneside}
-% \begin{macro}{\FP@floatTwoside}
-%  The Internal Macro |\FP@float| is the central output macro to perform the
-%  sequence of caption and float.  Here it is preliminary defined as a dummy:
-%    \begin{macrocode}
-\newcommand{\FP@floatOneside}{}
-\newcommand{\FP@floatTwoside}{}
-\newcommand{\FP@float}{}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%
-% \subsection{Declaration of options}
-%
-% \begin{macro}{german}
-%  In other languages the text strings pointing to the page of the float must be
-%  declared in other languages.  So far only German is implemented.
-%  When option |varioref| is later used, we must pass this option to
-%  \pkg{varioref}:
-%    \begin{macrocode}
-\DeclareOption{german}{%
-  \renewcommand{\FP@guideAfter}{n\"achste Seite}
-  \renewcommand{\FP@guideBefore}{vorhergehende Seite}
-  \renewcommand{\FP@guideOneside}{\FP@guideAfter}
-  \renewcommand{\FP@guideFaceBefore}{gegen\"uberliegende Seite}
-  \renewcommand{\FP@guideFaceAfter}{gegen\"uberliegende Seite}
-  \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}
-  \PassOptionsToPackage{german}{varioref}
-}%
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{varioref}
-%  Reference texts are already implemented for many languages in the standard
-%  package \pkg{varioref}, which implements slightly different expressions.
-%  To ensure the inclusion of the package we use |\RequirePackage{}|, which can
-%  only placed after |\ProcessOptions| below.  Therefore the code is delayed
-%  by |\AtBeginDocument{}|.
-%    \begin{macrocode}
-\DeclareOption{varioref}{%
-  \AtBeginDocument{%
-    \RequirePackage{varioref}
-    \ifthenelse{\equal{\reftextbefore}{\@empty}}%
-      {}{\renewcommand{\FP@guideBefore}{\reftextbefore}}%
-    \ifthenelse{\equal{\reftextafter}{\@empty}}%
-      {}{\renewcommand{\FP@guideAfter}{\reftextafter}}%
-    \renewcommand{\FP@guideOneside}{\FP@guideAfter}
-    \ifthenelse{\equal{\reftextfacebefore}{\@empty}}%
-      {}{\renewcommand{\FP@guideFaceBefore}{\reftextfacebefore}}%
-    \ifthenelse{\equal{\reftextfaceafter}{\@empty}}%
-      {}{\renewcommand{\FP@guideFaceAfter}{\reftextfaceafter}}%
-    \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}%
-  }%
-}%
-%    \end{macrocode}
-% \end{macro}
-%
-%   The Options are implemented via |\FP@float|, which will now have
-%   three arguments:
-%   The first is the label of the current page to determine if it is odd or even.
-%   The second contains the float itself, i.e. the figure ore table.
-%   The third contains all the commands, to initialize counters etc..
-%   The fourth is the caption part.
-% \begin{macro}{closeFloats}
-%    \begin{macrocode}
-\DeclareOption{closeFloats}{%
-  \renewcommand{\FP@floatOneside}[3]{#3#2#1}%
-  \renewcommand{\FP@floatTwoside}[4]{%
-    \ifthenelse{\isodd{\pageref{#1}}}{#2#3#4}{#4#3#2}}%
-}%
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{leftFloats}
-%    \begin{macrocode}
-\DeclareOption{leftFloats}{%
-  \renewcommand{\FP@floatOneside}[3]{#1#2#3}%
-  \renewcommand{\FP@floatTwoside}[4]{%
-    \ifthenelse{\isodd{\pageref{#1}}}{{#2#3#4}}{\afterpage{#2#3#4}}}%
-  \renewcommand{\FP@guideOneside}{\FP@guideBefore}%
-  \renewcommand{\FP@guideTwoside}{\FP@guideFaceBefore}%
-}%
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{rightFloats}
-%    \begin{macrocode}
-\DeclareOption{rightFloats}{%
-  \renewcommand{\FP@floatOneside}[3]{#3#2#1}%
-  \renewcommand{\FP@floatTwoside}[4]{%
-    \ifthenelse{\isodd{\pageref{#1}}}{\afterpage{#4#3#2}}{{#4#3#2}}}%
-  \renewcommand{\FP@guideOneside}{\FP@guideAfter}%
-  \renewcommand{\FP@guideTwoside}{\FP@guideFaceAfter}%
-}%
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{CaptionAfterwards}
-% \begin{macro}{CaptionBefore}
-% Some synonymous options
-%    \begin{macrocode}
-\DeclareOption{CaptionAfterwards}{\ExecuteOptions{leftFloats}}
-\DeclareOption{CaptionBefore}{\ExecuteOptions{rightFloats}}%
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{draft}
-% With the following options, we process options packages etc:
-%    \begin{macrocode}
-\DeclareOption{draft}{%
-  \renewcommand{\FP@helpNote}[2]{%
-    \marginpar{Insertion of FP#1}%
-    \typeout{FP#1 is inserted on page \pageref{#2}!}}%
-}%
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{oneside}
-%    \begin{macrocode}
-\DeclareOption{oneside}{%
-  \renewcommand{\FP@guide}{\FP@guideStyle(\FP@guideOneside)}%
-  \renewcommand{\FP@float}[4]{\FP@floatOneside{#2}{#3}{#4}}
-}%
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{twoside}
-%    \begin{macrocode}
-\DeclareOption{twoside}{%
-  \renewcommand{\FP@guide}{\FP@guideStyle(\FP@guideTwoside)}%
-  \renewcommand{\FP@float}[4]{\FP@floatTwoside{#1}{#2}{#3}{#4}}
-}%
-%    \end{macrocode}
-% \end{macro}
-%
-%
-% \begin{macro}{noSeparatorLine}
-%  He we implement some options to disable some of the functionality of the \fp\
-%  package: First the implementation of a separator line in |\FP@separatorCaption|
-%  is destroyed:
-%    \begin{macrocode}
-\DeclareOption{noSeparatorLine}{%
-  \renewcommand{\FP@separatorCaption}{}
-}
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{noHints}
-%  Secondly any hint in the caption towards the float is disabled.  We must
-%  delay this, because the option |varioref| will be executed later, too.
-%  We assume that the order of delayed code is the same as in the declaration.
-%    \begin{macrocode}
-\DeclareOption{noHints}{%
-  \AtBeginDocument{\renewcommand{\FP@guide}{}}
-}%
-%    \end{macrocode}
-% \end{macro}
-%
-%  Unknown options will result in a warning. Perhaps they mean anything to
-%  \pkg{varioref}:
-%    \begin{macrocode}
-\DeclareOption*{%
-  \PackageWarning{fltpage}{Unknown option `\CurrentOption'!}%
-  \PassOptionsToPackage{\currentOption}{varioref}
-}%
-%    \end{macrocode}
-%
-% \subsection{Excecution of options}
-%
-%  Set the default behaviour:
-%    \begin{macrocode}
-\ExecuteOptions{closeFloats}
-\ExecuteOptions{oneside}
-%    \end{macrocode}
-%
-%  Don't forget to process the Options in the order of declaration:
-%    \begin{macrocode}
-\ProcessOptions*
-\relax
-%    \end{macrocode}
-%
-% \subsection{New environments}
-%
-% \subsubsection{Internal environment doing the magic}
-%
-% \begin{macro}{\FP@floatBegin}
-%  The opening statement |\FP@float| has one argument which contains
-%  the strings `figure' or `table'.
-%    \begin{macrocode}
-\newcommand{\FP@floatBegin}[1]{%
-%    \end{macrocode}
-%  First we save the type of float for further processing to |\@captype|:
-%    \begin{macrocode}
-  \gdef\@captype{#1}%
-%    \end{macrocode}
-%  The |caption|, |label| and |fnum@figure| resp. |fnum@table| commands must be saved
-%  to be used later in the local group:
-%    \begin{macrocode}
-  \global\let\FP@savedCaptionCommand\caption%
-  \global\let\FP@savedLabelCommand\label%
-  \ifthenelse{\equal{\@captype}{figure}}
-     {\global\let\old@Fnum\fnum@figure}%
-     {\global\let\old@Fnum\fnum@table}%
-%    \end{macrocode}
-%  Initialize some text variables\dots
-%    \begin{macrocode}
-  \let\FP@LabelText\@empty%
-  \let\FP@CaptionText\@empty%
-  \let\FP@optionalCaptionText\@empty%
-%    \end{macrocode}
-%  Now we redefine the |label| and |caption| commands:
-%    \begin{macrocode}
-  \renewcommand\label[1]{\gdef\FP@LabelText{##1}}%
-  \renewcommand\caption[2][]{\gdef\FP@optionalCaptionText{##1}\gdef\FP@CaptionText{##2}}%
-%    \end{macrocode}
-%
-%  Finally we must start to record/save the contents of the float, i.e. figure or table etc.,
-%  in a box.
-%    \begin{macrocode}
-  \begin{lrbox}{\FP@floatCorpusBOX}%
-}%
-%    \end{macrocode}
-% \end{macro}
-%
-%
-%  \begin{macro}{\FP@floatEnd}
-%  The closing statement |\FP@floatEnd| terminates the collection of the float and
-%  causes the output of it and the caption.  Since we use |\afterpage|, the local Box
-%  |\FP@floatCorpusBOX| must assigned to the global |\FP@floatCorpusBOX|.
-%    \begin{macrocode}
-\newcommand{\FP@floatEnd}{%
-  \end{lrbox}%
-  \global\setbox\FP@floatCorpusBOX=\box\FP@floatCorpusBOX
-%    \end{macrocode}
-%  Creates a label for each figure or table for later determination if the page
-%  is odd or even. The counters |FP@figureC| or |FP@tableC| must be
-%  incremented before.
-%    \begin{macrocode}
-  \stepcounter{FP@\@captype C}%
-  \FP@savedLabelCommand{\FP@positionLabel}%
-%    \end{macrocode}
-%  Here we give some hints to the user about the state of the environment\dots
-%    \begin{macrocode}
-  \FP@helpNote{\@captype}{\FP@positionLabel}%
-%    \end{macrocode}
-%  Now call the wanted sequence of caption and float according to the options above
-%  with the |\FP@float| macro.  The first argument is the location label, which
-%  will be used to determine the current page.
-%    \begin{macrocode}
-  \FP@float{\FP@positionLabel}% location label test
-%    \end{macrocode}
-%  The second argument contains the float itself:
-%  First we open a float environment of type |\@captype| with option |[p]|.  The
-%  float itself, i.e. figure or table, will be used the contents of the box
-%  |\FP@floatCorpusBOX|.
-%  Before placing the label, in order to get the actual page of the figure/table
-%  referenced later, rather than the one with the caption, we must increment the
-%  the counter of type |\@captype|.
-%    \begin{macrocode}
-          {\begin{\@captype}[p!]
-             \usebox{\FP@floatCorpusBOX}%
-             \refstepcounter{\@captype}%
-             \ifthenelse{\equal{\FP@LabelText}{\@empty}}
-                {}{\FP@savedLabelCommand{\expandafter\protect\FP@LabelText}}%
-          \end{\@captype}}
-%    \end{macrocode}
-%  The third argument is used to reset something changed in the first object.
-%  So far it is only the counter of type |\@captype|.
-%    \begin{macrocode}
-           {\addtocounter{\@captype}{-1}}
-%    \end{macrocode}
-%  The fourth argument contains the caption:
-%  Again we open a float environment of type |\@captype| with option |[p]|.
-%  To distinguish the caption from the text, it is separated with a horizontal line.
-%  Space above and below are adjusted accordingly.
-%  Than we will adjust |\fnum@figure|, when wanted.
-%  Finally the caption is given with or without optional argument.
-%    \begin{macrocode}
-           {\begin{\@captype}[b!]%
-             \ifthenelse{\equal{\FP@guide}{\@empty}}%
-               {}{\ifthenelse{\equal{\@captype}{figure}}%
-                   {\renewcommand{\fnum@figure}{\old@Fnum\ {\FP@guide}}}%
-                   {\renewcommand{\fnum@table}{\old@Fnum\ {\FP@guide}}}}%
-             \setlength{\abovecaptionskip}{2pt plus2pt minus 1pt} % length above caption
-             \setlength{\belowcaptionskip}{2pt plus2pt minus 1pt} % length above caption
-             \FP@separatorCaption%
-             \ifthenelse{\equal{\FP@optionalCaptionText}{\@empty}}%
-               {\FP@savedCaptionCommand{\expandafter\protect\FP@CaptionText}}%
-               {\FP@savedCaptionCommand[\expandafter\protect\FP@optionalCaptionText]{\expandafter\protect\FP@CaptionText}}%
-           \end{\@captype}}%
-}%
-%    \end{macrocode}
-%  \end{macro}
-%
-%
-%  \subsubsection{The user interface with the new two environments}
-%
-% \begin{macro}{FPfigure}
-% \begin{macro}{FPtable}
-%  Finally we implement the new environments, the user wants to use.
-%  They redirect to |FP@floatBegin| with the string `figure' or `table' and to
-%  |FP@floatEnd|.
-%    \begin{macrocode}
-\newenvironment{FPfigure}{\FP@floatBegin{figure}}{\FP@floatEnd}
-\newenvironment{FPtable}{\FP@floatBegin{table}}{\FP@floatEnd}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-%
-%    \begin{macrocode}
-%</package>
-%    \end{macrocode}
-%
-% ^^A -----------------------------
-%
-\endinput
-%% \CharacterTable
-%% {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%%  Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%%  Digits        \0\1\2\3\4\5\6\7\8\9
-%%  Exclamation   \!     Double quote  \"     Hash (number) \#
-%%  Dollar        \$     Percent       \%     Ampersand     \&
-%%  Acute accent  \'     Left paren    \(     Right paren   \)
-%%  Asterisk      \*     Plus          \+     Comma         \,
-%%  Minus         \-     Point         \.     Solidus       \/
-%%  Colon         \:     Semicolon     \;     Less than     \<
-%%  Equals        \=     Greater than  \>     Question mark \?
-%%  Commercial at \@     Left bracket  \[     Backslash     \\
-%%  Right bracket \]     Circumflex    \^     Underscore    \_
-%%  Grave accent  \`     Left brace    \{     Vertical bar  \|
-%%  Right brace   \}     Tilde         \~}
-%  \Finale
diff --git a/Master/texmf-dist/source/latex/fltpage/fltpage.ins b/Master/texmf-dist/source/latex/fltpage/fltpage.ins
deleted file mode 100644
index 08aa7101bbd..00000000000
--- a/Master/texmf-dist/source/latex/fltpage/fltpage.ins
+++ /dev/null
@@ -1,87 +0,0 @@
-%%
-%% Copyright (C) [1998] by Sebastian Gross. All rights reserved.
-%%
-%% IMPORTANT NOTICE:
-%%
-%% You are not allowed to change this file.
-%%
-%% The copyright notice below is also valid for this file.
-%%
-%% This file will be used by the docstrip.tex program to generate
-%% fast loadable files from the doc files.
-%%
-%% Remember: DON’T CHANGE THIS FILE
-%%
-%% --------------- start of docstrip commands ------------------
-\def\batchfile{fltpage.ins}
-\input docstrip.tex
-{\ifx\generate\undefined
-\Msg{**********************************************}
-\Msg{*}
-\Msg{* This installation requires docstrip}
-\Msg{* version 2.3c or later.}
-\Msg{*}
-\Msg{* An older version of docstrip has been input}
-\Msg{*}
-\Msg{**********************************************}
-\errhelp{Move or rename old docstrip.tex.}
-\errmessage{Old docstrip in input path}
-\batchmode
-\csname @@end\endcsname
-\fi}
-
-\preamble
-
-Copyright (C) 1998 by Sebastian Gross. All rights reserved.
-
-
-This file is part of the fltpage package
-
-IMPORTANT NOTICE:
-
-This a tool or better yet, an experiments written by Sebastian Gross,
-who is writing this not only for it utility value, but as part of the
-process of learning LaTeX.  This utility is far from perfect, and
-comments are welcome.
-
-The usual disclaimers apply:  If it doesn't work right that's your problem!
-
-The usual GNU-style conditions apply: If you change it, you take
-the blame; if you pass it on, pass on all present conditions;
-
-Error Reports in case of UNCHANGED versions to
-
-      Sebastian Gross   <seppel@zedat.fu-berlin.de>
-
-\endpreamble
-\declarepreamble\driverpreamble
-This file is part of the fltpage package
------------------------------------------
-
-Copyright (C) 1998 Sebastian Gross. All rights reserved.
-
-To produce the documentation in the way you like you are allowed
-to change this driver file.
-\endpreamble
-
-\keepsilent
-\askforoverwritefalse
-\generate{\file{fltpage.sty}{\from{fltpage.dtx}{package}}
-         }
-
-\Msg{***********************************************************}
-\Msg{*}
-\Msg{* To finish the installation you have to move the following}
-\Msg{* style files into a directory searched by TeX:}
-\Msg{*}
-\Msg{* \space\space fltpage.sty}
-\Msg{*}
-\Msg{* To produce the documentation run the file fltpage.dtx}
-\Msg{* through LaTeX.}
-\Msg{*}
-\Msg{* Happy TeXing}
-\Msg{***********************************************************}
-
-\endinput
-%%
-%% End of file ‘fltpage.ins’.