summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2009-03-23 23:55:25 +0000
committerKarl Berry <karl@freefriends.org>2009-03-23 23:55:25 +0000
commitf3e4da8de0bec75f027ec22af12443c9cfa2a0f6 (patch)
tree379874ddfb450374aa4041d4cfe33ba339650cd6 /Master/texmf-dist/source/latex
parent7c3f2bb14d2593c80109a9f0d28f3310dcb60c9b (diff)
svn-multi 2.0 (23mar09)
git-svn-id: svn://tug.org/texlive/trunk@12503 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source/latex')
-rw-r--r--Master/texmf-dist/source/latex/svn-multi/Makefile95
-rw-r--r--Master/texmf-dist/source/latex/svn-multi/svn-multi-pl.dtx565
-rw-r--r--Master/texmf-dist/source/latex/svn-multi/svn-multi.dtx3979
-rw-r--r--Master/texmf-dist/source/latex/svn-multi/svn-multi.ins32
4 files changed, 3982 insertions, 689 deletions
diff --git a/Master/texmf-dist/source/latex/svn-multi/Makefile b/Master/texmf-dist/source/latex/svn-multi/Makefile
index 47c8399e7cb..fc3662c8d2b 100644
--- a/Master/texmf-dist/source/latex/svn-multi/Makefile
+++ b/Master/texmf-dist/source/latex/svn-multi/Makefile
@@ -1,38 +1,51 @@
# $Id: Makefile 628 2007-07-10 20:32:06Z martin $
PACKAGE=svn-multi
-PACKFILES = ${PACKAGE}.dtx ${PACKAGE}.ins ${PACKAGE}.pdf example_main.tex \
- example_chap1.tex example.pdf Makefile README
-TEXAUX = *.aux *.log *.glo *.ind *.idx *.out *.svn *.toc *.ilg *.gls *.hd
+PACKFILES = ${PACKAGE}.dtx ${PACKAGE}.ins ${PACKAGE}.pdf svn-multi-pl.dtx svn-multi.pl example_main.tex \
+ example_chap1.tex example.pdf Makefile README group_example.tex
+TEXAUX = *.aux *.log *.glo *.ind *.idx *.out *.svn *.svx *.svt *.toc *.ilg *.gls *.hd
TESTDIR = tests
TESTS = $(patsubst %.tex,%,$(subst ${TESTDIR}/,,$(wildcard ${TESTDIR}/test?.tex ${TESTDIR}/test??.tex))) # look for all test*.tex file names and remove the '.tex'
TESTARGS = -output-directory ${TESTDIR}
-GENERATED = ${PACKAGE}.pdf ${PACKAGE}.sty svnkw.sty example.pdf ${PACKAGE}.zip ${PACKAGE}.tar.gz ${TESTDIR}/test*.pdf
+INSGENERATED = ${PACKAGE}.sty svnkw.sty svn-multi.pl
+GENERATED = ${INSGENERATED} ${PACKAGE}.pdf svn-multi-pl.pdf example.pdf group_example.pdf group_example_*.tex ${PACKAGE}.zip ${PACKAGE}.tar.gz ${TESTDIR}/test*.pdf
+ZIPFILE = ${PACKAGE}-${ZIPVERSION}.zip
+
+LATEX_OPTIONS = -interaction=batchmode
+LATEX = pdflatex ${LATEX_OPTIONS}
RED = \033[01;31m
GREEN = \033[01;32m
WHITE = \033[00m
-.PHONY: all doc package clean fullclean example ${TESTS}
+.PHONY: all doc package clean fullclean example testclean ${TESTS}
all: package doc example
new: fullclean all
-doc: ${PACKAGE}.pdf
+doc: ${PACKAGE}.pdf svn-multi-pl.pdf
+
+package: ${PACKAGE}.sty ${PACKAGE}.pl
+
+%.pdf: %.dtx
+ ${LATEX} $*.dtx
+ ${LATEX} $*.dtx
+ -makeindex -s gind.ist -o $*.ind $*.idx
+ -makeindex -s gglo.ist -o $*.gls $*.glo
+ ${LATEX} $*.dtx
+ ${LATEX} $*.dtx
-package: ${PACKAGE}.sty
+%.pdf: %.eps
+ epstopdf $<
-${PACKAGE}.pdf: ${PACKAGE}.dtx ${PACKAGE}.sty
- pdflatex ${PACKAGE}.dtx
- pdflatex ${PACKAGE}.dtx
- pdflatex ${PACKAGE}.dtx
- makeindex -s gind.ist -o ${PACKAGE}.ind ${PACKAGE}.idx
- makeindex -s gglo.ist -o ${PACKAGE}.gls ${PACKAGE}.glo
- pdflatex ${PACKAGE}.dtx
- pdflatex ${PACKAGE}.dtx
+%.eps: %.dia
+ dia -t eps -e $@ $<
-${PACKAGE}.sty: ${PACKAGE}.dtx ${PACKAGE}.ins
+${PACKAGE}.pdf:
+
+${INSGENERATED}: *.dtx ${PACKAGE}.ins
yes | latex ${PACKAGE}.ins
+ @-chmod +x *.pl
clean:
rm -f ${TEXAUX} $(addprefix ${TESTDIR}/, ${TEXAUX})
@@ -40,22 +53,37 @@ clean:
fullclean:
rm -f ${TEXAUX} $(addprefix ${TESTDIR}/, ${TEXAUX}) ${GENERATED} *~ *.backup
-example: example.pdf
+example: example.pdf gexample
example.pdf: example_main.tex example_chap1.tex ${PACKAGE}.sty
- pdflatex $<
- pdflatex $<
+ ${LATEX} $<
+ perl ./svn-multi.pl $<
+ ${LATEX} $<
mv example_main.pdf $@
-nsexample: namespace_example.tex $(wildcard namespace*.tex)
- pdflatex $<
- pdflatex $<
+gexample: group_example.pdf
+
+group_example.pdf: group_example.tex svn-multi.sty
+ ${RM} $(addprefix group_example, ${TEXAUX}) group_example_*.tex
+ ${LATEX} $<
+ ${LATEX} $<
+ perl svn-multi.pl group_example
+ ${LATEX} $<
+ ${LATEX} $<
+ ${LATEX} $<
+
+zip: fullclean package doc example tests ${ZIPFILE}
+${PACKAGE}.zip: zip
-zip: package doc example ${PACKAGE}.zip
+zip: ZIPVERSION=$(shell grep '\\def\\fileversion{.*}' svn-multi.dtx | sed -e 's/\\def\\fileversion{\(.*\)}/\1/' -e 's/\s\+//g')
-${PACKAGE}.zip: ${PACKFILES}
+${ZIPFILE}: ${PACKFILES}
grep -q '\* Checksum passed \*' svn-multi.log
- cd .. && zip ${PACKAGE}/$@ $(addprefix ${PACKAGE}/, ${PACKFILES})
+ grep -q '\* Checksum passed \*' svn-multi-pl.log
+ -pdfopt ${PACKAGE}.pdf opt_${PACKAGE}.pdf && mv opt_${PACKAGE}.pdf ${PACKAGE}.pdf
+ zip ${ZIPFILE} ${PACKFILES}
+ @echo
+ @echo "ZIP file ${ZIPFILE} created!"
tar.gz: ${PACKAGE}.tar.gz
@@ -64,18 +92,23 @@ ${PACKAGE}.tar.gz:
# Make sure TeX finds the input files in TESTDIR
tests ${TESTS}: export TEXINPUTS:=${TEXINPUTS}:${TESTDIR}
+tests ${TESTS}: LATEX_OPTIONS=
+
+testclean:
+ @${RM} $(foreach ext, aux log out pdf svn svx, tests/test*.${ext})
-tests: package
+tests: package testclean
@echo "Running tests: ${TESTS}:"
@${MAKE} -e -i --no-print-directory ${TESTS} \
TESTARGS="-interaction=batchmode -output-directory=${TESTDIR}"\
TESTPLOPT="-q"\
> /dev/null
-${TESTS}: % : ${TESTDIR}/%.tex package
- @-pdflatex -interaction=nonstopmode ${TESTARGS} $< 1>/dev/null 2>/dev/null
- @if (pdflatex ${TESTARGS} $< && (test ! -e ${TESTDIR}/$*.pl || ${TESTDIR}/$*.pl ${TESTPLOPT})); \
- then echo -e "${GREEN}$@ succeeded${WHITE}" >&2; \
- else echo -e "${RED}$@ failed!!!!!!${WHITE}" >&2; fi
+${TESTS}: % : ${TESTDIR}/%.tex package testclean
+ @-${LATEX} -interaction=nonstopmode ${TESTARGS} $< 1>/dev/null 2>/dev/null
+ @if test -e ${TESTDIR}/$*.svn; then perl ./svn-multi.pl ${TESTDIR}/$* 1>/dev/null ; fi
+ @if (${LATEX} ${TESTARGS} $< && (test ! -e ${TESTDIR}/$*.pl || ${TESTDIR}/$*.pl ${TESTPLOPT})); \
+ then /bin/echo -e "${GREEN}$@ succeeded${WHITE}" >&2; \
+ else /bin/echo -e "${RED}$@ failed!!!!!!${WHITE}" >&2; fi
diff --git a/Master/texmf-dist/source/latex/svn-multi/svn-multi-pl.dtx b/Master/texmf-dist/source/latex/svn-multi/svn-multi-pl.dtx
new file mode 100644
index 00000000000..cd849921e65
--- /dev/null
+++ b/Master/texmf-dist/source/latex/svn-multi/svn-multi-pl.dtx
@@ -0,0 +1,565 @@
+% \iffalse
+%<*driver>
+\iffalse
+%</driver>
+#!/usr/bin/perl
+# --------------------------------------------------------------
+# svn-multi.pl for the svn-multi v2.0 LaTeX package
+# version 0.1, Mar 1st, 2009
+# --------------------------------------------------------------
+#
+# Copyright (C) 2006-2009 Martin Scharrer
+# E-mail: martin@scharrer-online.de
+# WWW: http://www.scharrer-online.de/latex/svn-multi/
+#
+# $Id: svn-multi-pl.dtx 591 2009-03-19 18:08:07Z martin $
+#
+# This program works only in combination with the LaTeX package 'svn-multi' and
+# generates .svx files with '\svnidlong' macros holding Subversion keywords for
+# files declared with '\svnexternal' inside the LaTeX document.
+#
+# This program is free software under the GPL v3 and LPPL v1.3c or later.
+#
+#
+# GPL v3:
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# LPPL v1.3c:
+# This work may be distributed and/or modified under the
+# conditions of the LaTeX Project Public License, either version 1.3c
+# of this license or (at your option) any later version.
+# The latest version of this license is in
+# http://www.latex-project.org/lppl.txt
+# and version 1.3c or later is part of all distributions of LaTeX
+# version 2008/05/04 or later.
+#
+# This work has the LPPL maintenance status `maintained'.
+#
+# The Current Maintainer of this work is Martin Scharrer.
+#
+# This work consists of the files svn-multi.dtx, svn-multi-pl.dtx and
+# svn-multi.ins and the derived files svn-multi.sty, svnkw.sty and svn-multi.pl.
+#
+# The file 'svn-multi.pl' may be renamed to 'svn-multi' for installation
+# purposes.
+#
+#
+%<*driver>
+\fi
+\def\filedate$#1: #2 #3 #4-#5-#6 #7 ${%
+ \year#4\month#5\day#6\relax
+ \def\filedate{#4/#5/#6}%
+}
+\filedate$Id: svn-multi-pl.dtx 591 2009-03-19 18:08:07Z martin $
+\def\fileversion{v0.1}
+\ProvidesFile{svn-multi-pl.dtx}
+ [\filedate\space\fileversion\space SVN Keywords extractor for svn-multi]
+
+\documentclass{ltxdoc}
+\usepackage{ifpdf}
+\ifpdf
+ % use hypdoc if you have it, hyperref else
+ %\usepackage[hyperfootnotes=false]{hyperref}
+ \usepackage{hypdoc}
+\else\let\url=\texttt\fi
+\usepackage{xspace}
+\newcommand{\ie}{i.e.\@\xspace}
+\newcommand{\eg}{e.g.\@\xspace}
+
+\newenvironment{sub}{\begin{macro}}{\end{macro}}
+\newcommand{\parni}{\par\noindent}
+\newlength{\origparindent}
+\setlength{\origparindent}{\parindent}
+\setlength{\parindent}{0pt}
+\let\origpar=\par
+\def\par{\parindent=\origparindent\origpar\parindent=0pt}
+
+%\EnableCrossrefs
+\DisableCrossrefs
+\CodelineIndex
+%\PageIndex
+%\RecordChanges
+\begin{document}
+ %\OnlyDescription
+ \DocInput{\jobname.dtx}%
+ %\PrintChanges
+ %\clearpage
+ %\PrintIndex
+\end{document}
+%</driver>
+%<*script>
+%\fi
+%
+% \CheckSum{66}
+%
+% {\makeatother
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+% }
+% \iffalse " \fi
+%
+% \title{The \textsf{svn-multi.pl} script\thanks{This document
+% corresponds to \textsf{svn-multi.pl}~\fileversion, dated \filedate.}}
+% \author{Martin Scharrer \\ \url{martin@scharrer-online.de} \\
+% \url{http://www.scharrer-online.de/latex/svn-multi}}
+%
+% \ifpdf
+% \hypersetup{
+% pdfauthor={Martin Scharrer <martin@scharrer-online.de>},
+% pdftitle={The svn-multi.pl script},
+% pdfsubject={Documentation of Perl script svn-multi.pl which allows the
+% typesetting of external Subversion keywords in multi-file LaTeX documents},
+% pdfkeywords={svn-multi, svnkw, LaTeX, Subversion, keywords, Version
+% Control, Id, script}
+% }
+% \fi
+% \maketitle
+%
+% \textbf{Note:} This document is work in progress.\par
+% \section{Usage}
+% See the section in the |svn-multi| package manual or the
+% \hyperlink{usage}{\texttt{usage}} function below.
+%
+% \StopEventually{}
+% \section{Implementation}
+%
+% \subsection{Script Head}
+% Loading of required Modules.
+% \begin{macrocode}
+use strict;
+use warnings;
+use File::Basename;
+% \end{macrocode}
+% Declaration of constants VERSION, REV and DATE for script info output:
+% \begin{macrocode}
+my $VERSION = "0.2";
+my ($REV,$DATE) =
+ (split ' ','$Id: svn-multi-pl.dtx 591 2009-03-19 18:08:07Z martin $')[2,3];
+% \end{macrocode}
+
+% Declaration of other global constants and variables:
+% \begin{macrocode}
+my $dollar = '$';
+my @PATH;
+my %EXCLUDE = map { $_ => 1 } qw(sty tex aux log out toc fff ttt svn svx);
+% \end{macrocode}
+
+% Subfunction prototypes:
+% \begin{macrocode}
+sub create_svxfile ($@);
+sub usage;
+% \end{macrocode}
+
+% Check if help was requested:
+% \begin{macrocode}
+if (!@ARGV or grep { $_ eq '--help' or $_ eq '-h' } @ARGV) {
+ usage();
+}
+% \end{macrocode}
+
+% Print identification line like other TeX related programs:
+% \begin{macrocode}
+print STDOUT "This is svn-multi.pl, Version $VERSION-$REV, $DATE\n";
+% \end{macrocode}
+
+% The first argument is taken as the jobname. To be more userfriendly the name
+% can include some standard extension and a path which are stripped.
+% \begin{macrocode}
+my ($jobname, $dir, $suffix) = fileparse(shift @ARGV, qr/\.(tex|ltx|dtx|svn)$/);
+% \end{macrocode}
+% If a directory was specified this program is changing into it because the
+% file paths in the |.svn| file are relative to it.
+% \begin{macrocode}
+if ($dir && $dir ne './') {
+ printf STDOUT "Main directory is '$dir'.\n";
+ chdir($dir);
+}
+% \end{macrocode}
+% \begin{macrocode}
+
+if ($jobname =~ /^-/) {
+ usage();
+}
+my $outfile = "$jobname.svx";
+
+my %external;
+
+% \end{macrocode}
+% Regular expressions to read the |.svn| file:
+% \paragraph{svnexternalpath:} The format is:\\
+% \hspace*{2em}|\@svnexternalpath{{patha}{pathb}{...}{pathd}}|
+% \begin{macrocode}
+my $resvnexternalpath = qr/
+ ^ # at begin of line
+ \s* # allow for spaces
+ \\\@svnexternalpath # the macro name
+ \s*
+ { # begin token group
+ \s*
+ (?: # paths:
+ { # { of first path
+ (.*) # everything else, e.g: 'patha}{pathb}{pathc'
+ } # } of last path
+ | # or nothing
+ )
+ \s*
+ } # end token group
+ \s*
+ $ # end of line
+ /x;
+% \end{macrocode}
+
+% \paragraph{svnexternal:} The format is:\\
+% \hspace*{2em}|\@svnexternal[group name]{{filea}{fileb}{...}{filed}}|
+% \begin{macrocode}
+my $resvnexternal = qr/
+ ^ # at begin of line
+ \s* # allow for spaces
+ \\\@svnexternal # the macro name
+ \s*
+ (?: # optional:
+ \[ # opening [
+ ([^\]]*) # group name (everything until ])
+ \] # closing ]
+ )?
+ \s*
+ { # begin token group
+ ([^}]+) # file name (everything until })
+ } # end token group
+ \s*
+ { # begin token group
+ \s*
+ (?: # paths:
+ { # { of first file
+ (.*) # everything else, e.g: 'filea}{fileb}{filec'
+ } # } of last file
+ | # or nothing
+ )
+ \s*
+ } # end token group
+ \s*
+ $ # end of line
+ /x;
+% \end{macrocode}
+
+% \begin{macrocode}
+if (-e "$jobname.svn" and open( my $svnfh, '<', "$jobname.svn")) {
+ print STDOUT "Reading '$jobname.svn'.\n";
+ while (<$svnfh>) {
+ chomp;
+ if (/$resvnexternalpath/) {
+ push @PATH, ( split /}\s*{/, $1 );
+ }
+ elsif (/$resvnexternal/) {
+ my ($group,$file,$list) = ($1||"",$2,$3||"");
+ $file =~ s/^\.\///;
+ push @{$external{$file}{$group} ||= []}, ( split /}\s*{/, $list );
+ }
+ }
+ close ($svnfh);
+}
+else {
+ warn "No .svn file found for '$jobname'!\n";
+}
+
+# Add TEXINPUTS to path
+push @PATH, map { $_ =~ s/(?<!\/)$/\//; $_ } grep { $_ }
+ split(':', $ENV{'TEXINPUTS'}||"");
+
+my @mainfilepairs;
+my $maintex = "$jobname.tex";
+if (exists $external{$maintex}) {
+ while ( my ($group,$list) = each %{$external{$maintex}} ) {
+ push @mainfilepairs, [ $group, [ @$list ] ];
+ }
+ delete $external{$maintex};
+}
+
+push @mainfilepairs, parse_args(@ARGV);
+create_svxfile("$jobname.svx", @mainfilepairs )
+ if @mainfilepairs;
+
+foreach my $file (keys %external) {
+ my @pairs;
+ my $svxfile = $file;
+ $svxfile =~ s/\.(tex|ltx)$/.svx/;
+ while ( my ($group,$list) = each %{$external{$file}} ) {
+ push @pairs, [ $group, [ @$list ] ];
+ }
+ create_svxfile($svxfile, @pairs);
+}
+% \end{macrocode}
+
+% \subsection{Functions}
+
+% \begin{sub}{parse args}
+% Parses the arguments and builds a list of (group,(files)) pairs.
+% \begin{macrocode}
+sub parse_args {
+ my @args = @_;
+ my $group = '';
+ my @files;
+ my $readfg;
+ my @pairs;
+
+ foreach my $arg (@args) {
+ if ($readfg) {
+ $readfg = 0;
+ $group = $arg;
+ $group =~ s/^["']|["']$//; # '
+ }
+ elsif ($arg =~ /^--group|^-?-fg/) {
+ push @pairs, [ $group, [ @files ] ];
+ @files = ();
+ if ($arg =~ /^--group=(.*)/) {
+ $group = $1;
+ $group =~ s/^["']|["']$//; # '
+ }
+ else {
+ $readfg = 1;
+ }
+ }
+ elsif ($arg =~ /^--fls/) {
+ push @files, read_fls("$jobname.fls");
+ }
+ else {
+ push @files, $arg;
+ }
+ }
+ push @pairs, [ $group, [ @files ] ] if @files;
+ return @pairs;
+}
+% \end{macrocode}
+% \end{sub}
+
+% \begin{sub}{path search}
+% Search all directories in |PATH| to find the given file and return the first
+% own found.
+% \begin{macrocode}
+sub path_search {
+ my $file = shift;
+ $file =~ s/##/#/g;
+ return $file if not $file or -e $file or not @PATH;
+
+ foreach my $dir (@PATH) {
+ if (-e "$dir$file") {
+ return "$dir$file";
+ }
+ }
+
+ return $file;
+}
+% \end{macrocode}
+% \end{sub}
+
+% \begin{sub}{ceate svxfile}
+% Creates the |.svx| file named by the first argument. The second argument is a
+% list of (group name/files) pairs.
+% \begin{macrocode}
+sub create_svxfile ($@) {
+ my ($svxfile, @fgpair) = @_;
+ my $lastgroup;
+ my $fgused = 0;
+ my %seen;
+ return if not @fgpair or not $svxfile;
+
+ open(my $svxfh, '>', $svxfile) or do {
+ warn "ERROR: Could not create SVX file '$svxfile'!\n";
+ return;
+ };
+ print STDOUT "Generating .svx file '$svxfile'.\n";
+ select $svxfh;
+ print "% Generated by svn-multi.pl v$VERSION\n\n";
+
+ while ( my ($group, $files) = @{shift @fgpair||[]}) {
+ no warnings 'uninitialized';
+ if ( (not defined $lastgroup and $group) or ($group ne $lastgroup) ) {
+ print "\\svngroup{$group}\n";
+ }
+ use warnings;
+ if ($group) {
+ $fgused = 1;
+ }
+
+ foreach my $file (@$files) {
+ $file = path_search($file);
+
+ # Only print the file once per group and .svx file
+ next if $seen{$group}{$file};
+ $seen{$group}{$file} = 1;
+
+ open(my $infoh, '-|', "svn info '$file' 2>/dev/null") or next;
+ my %info = map { chomp; split /\s*:\s*/, $_, 2 } <$infoh>;
+ close($infoh);
+ if (not keys %info) {
+ print "% Could not receive keywords for '$file'!\n\n";
+ next;
+ }
+ print "% Keywords for '$file'\n";
+ print svnidlong(\%info);
+ print "\\svnexternalfile";
+ print "[$group]" if $group;
+ print "{$file}\n";
+ print "\n"
+ }
+
+ $lastgroup = $group;
+ }
+ print "\n";
+ close ($svxfh);
+}
+% \end{macrocode}
+% \end{sub}
+
+% \begin{sub}{svnid}
+% Generates \cs{svnid} macro lines. Awaits a hash with the information
+% received from |svn|. The |$| sign is masked to avoid keyword extension by
+% Subversion inside this source file.
+% Additional modules are needed to produce the date format used by |$||Id$|.
+% \begin{macrocode}
+sub svnid {
+ use Date::Parse;
+ use Date::Format;
+ my $href = shift;
+ return "" if (not defined $href->{Name});
+ my $date = time2str("%Y-%m-%d %XZ", str2time($href->{'Last Changed Date'}), 'Z');
+ return <<"EOT";
+\\svnid{${dollar}Id: $href->{Name} $href->{'Last Changed Rev'} $date $href->{'Last Changed Author'} \$}
+EOT
+}
+% \end{macrocode}
+% \end{sub}
+
+% \begin{sub}{svnidlong}
+% Generates \cs{svnidlong} macro lines. Awaits a hash with the information
+% received from |svn|. The |$| sign is masked to avoid keyword extension by
+% Subversion inside this source file.
+% \begin{macrocode}
+sub svnidlong {
+ my $href = shift;
+ return <<"EOT";
+\\svnidlong
+{${dollar}HeadURL: $href->{URL} \$}
+{${dollar}LastChangedDate: $href->{'Last Changed Date'} \$}
+{${dollar}LastChangedRevision: $href->{'Last Changed Rev'} \$}
+{${dollar}LastChangedBy: $href->{'Last Changed Author'} \$}
+EOT
+}
+% \end{macrocode}
+% \end{sub}
+
+% \begin{sub}{read fls}
+% Reads the |.fls| file and looks for |INPUT relativedir/file| lines.
+% The file is ignored if its extension is in the |EXCLUDE| list.
+% \begin{macrocode}
+sub read_fls {
+ my $fls = shift;
+ my %stack;
+ open (my $fh, '<', $fls) or return;
+ while (<$fh>) {
+ chomp;
+ if (/^INPUT ([^\/].*)$/) {
+ my $file = $1;
+ my $ext = substr($file, rindex($file,'.')+1);
+ $stack{$1} = 1 if not exists $EXCLUDE{$ext};
+ }
+ }
+ close($fh);
+ return keys %stack;
+}
+% \end{macrocode}
+% \end{sub}
+
+% \begin{sub}{usage}
+% \hypertarget{usage}{}%
+% Prints usage information.
+% \begin{macrocode}
+sub usage {
+ print STDOUT <<'EOT';
+Usage:
+ svn-multi.pl jobname[.tex] [--fls] [--group|-g <group name>] [input_files] ...
+ ... [--group|-g <group name>] [input_files] ...
+
+Description:
+ This LaTeX helper script collects Subversion keywords from non-(La)TeX files
+ and provides it to the 'svn-multi' package using '.svx' files. It will first
+ scan the file '<jobname>.svn' for files declared by the '\svnextern' macro but
+ also allows to provide additional files including the corresponding groups. The
+ keywords for the additional files will be written in the file '<jobname>.svx'.
+
+Options:
+ jobname[.tex] : The LaTeX `jobname`, i.e. the basename of your main LaTeX file.
+ --group <GN> : Use given group name <GN> for all following files,
+ or -g <GN> including the one read by a '--fls' option, until the next
+ group is specified.
+ --fls : Read list of (additional) files from the file '<jobname>.fls'. This
+ file is produced by LaTeX when run with the '--recorder' option and
+ contains a list of all input and output files used by the LaTeX main
+ file. Only input files with a relative path will be used. A
+ previously selected group will be honoured.
+
+Examples:
+The main LaTeX file here is 'mymainlatexfile.tex'.
+
+ svn-multi.pl mymainlatexfile
+ Creates Subversion keywords for all files declared by '\svnextern' inside
+ the LaTeX code.
+
+ svn-multi.pl mymainlatexfile --group=FLS --fls
+ Creates Subversion keywords for all files declared by '\svnextern' inside
+ the LaTeX code. In addition it does the same for all relative input files
+ mentioned in the .fls file which are placed in the 'FLS' group.
+
+ svn-multi.pl mymainlatexfile a b c --group=B e d f
+ In addition to the '\svnextern' declared files the keywords for the files
+ 'a', 'b' and 'c' will be added without a specific group, i.e. the last group
+ specified in the LaTeX file before the '\svnextern' macro will be used. The
+ keywords for 'e', 'd', 'f' will be part of group 'B'.
+
+ svn-multi.pl mymainlatexfile --group=A a --group=B b --group='' c
+ File 'a' is in group 'A', 'b' is in 'B' and 'c' is not in any group.
+
+Further Information:
+See the svn-multi package manual for more information about this script.
+EOT
+ exit(0);
+}
+% \end{macrocode}
+% \end{sub}
+
+% End of File
+% \begin{macrocode}
+__END__
+% \end{macrocode}
+%
+% \Finale
+% \iffalse
+%</script>
+% \fi
+% ^^A \iffalse vim: ft=perl,sw=2,ts=2
+% ^^A \fi
diff --git a/Master/texmf-dist/source/latex/svn-multi/svn-multi.dtx b/Master/texmf-dist/source/latex/svn-multi/svn-multi.dtx
index 67c693b24b9..8b33547727d 100644
--- a/Master/texmf-dist/source/latex/svn-multi/svn-multi.dtx
+++ b/Master/texmf-dist/source/latex/svn-multi/svn-multi.dtx
@@ -1,8 +1,8 @@
% \iffalse meta-comment
-% Copyright (C) 2006-2007 by Martin Scharrer <martin@scharrer-online.de>
+% Copyright (C) 2006-2009 by Martin Scharrer <martin@scharrer-online.de>
% http://www.scharrer-online.de/latex/
% -----------------------------------------------------------------
-%
+%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
@@ -10,92 +10,272 @@
% http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
-%
+%
% This work has the LPPL maintenance status `maintained'.
-%
+%
% The Current Maintainer of this work is Martin Scharrer.
-%
+%
% This work consists of the files svn-multi.dtx and svn-multi.ins
% and the derived files svn-multi.sty and svnkw.sty.
-% $Id: svn-multi.dtx 628 2007-07-10 20:32:06Z martin $
+% $Id: svn-multi.dtx 621 2009-03-23 12:26:36Z martin $
% \fi
% \iffalse
+%<*package|driver|wrapper>
+\def\filedate$#1: #2 #3 #4-#5-#6 #7 ${%
+ \year#4\month#5\day#6\relax
+ \def\filedate{#4/#5/#6}%
+ \def\filerev{#3}%
+}
+\filedate$Id: svn-multi.dtx 621 2009-03-23 12:26:36Z martin $
+\def\fileversion{v2.0}
+%</package|driver|wrapper>
%<*driver>
\ProvidesFile{svn-multi.dtx}
-%</driver>
-%<package>%% DTX Id: $Id: svn-multi.dtx 628 2007-07-10 20:32:06Z martin $
-%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-%<package>\ProvidesPackage{svn-multi}
-%<*package|driver>
- [2009/02/28 v1.5 SVN Keywords for multi-file LaTeX documents]
-%</package|driver>
-%<wrapper>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-%<wrapper>\ProvidesPackage{svnkw}
-%<wrapper> [2009/02/28 v1.5 Backward compatibility wrapper for svn-multi]
-%<wrapper>\RequirePackage{svn-multi}[2009/02/28]
-%
-%<*driver>
+ [\filedate\space\fileversion\space SVN Keywords for multi-file LaTeX documents]
+
\documentclass{ltxdoc}
\usepackage{svn-multi}
+\usepackage{booktabs}
\usepackage{ifpdf}
\ifpdf
- % use hypdoc if you have it, hyperref else
- %\usepackage[hyperfootnotes=false]{hyperref}
- \usepackage{hypdoc}
-\else\let\url=\texttt\fi
+ % use hypdoc if you have it, hyperref else
+ \IfFileExists{hypdoc.sty}
+ {\usepackage{hypdoc}}
+ {\usepackage{hyperref}}
+\else
+ \let\url\texttt
+\fi
\usepackage{xspace}
\newcommand{\ie}{i.e.\@\xspace}
\newcommand{\eg}{e.g.\@\xspace}
-\iffalse % crossreference of macros in documentation
-\begingroup
-\catcode`\*=0
-\catcode`\\=12
-*gdef*removeslash\#1 #2END{#1#2}
-*endgroup
-
+\iffalse
+\let\css=\cs
+\let\op=\cs
+\let\DescribeOption\DescribeMacro
+\let\DescribeScript\DescribeOption
+\else % crossreference of macros in documentation
\makeatletter
- % link \cs to macro definitions
- \let\origmacro\macro
- \let\origendmacro\endmacro
- \let\origStopEventually\StopEventually
- \let\origPrintDescribeMacro\PrintDescribeMacro
-
- \renewenvironment{macro}[1]{%
- \edef\macroname{\expandafter\removeslash\detokenize{#1}END}
- \hypertarget{\macroname}{}
- \origmacro#1}
- {\origendmacro}
-
- \DeclareRobustCommand{\cs}[1]{\hyperlink{Desc@#1}{\texttt{\textbackslash#1}}}
-
- \def\StopEventually#1{\origStopEventually{#1}%
- \DeclareRobustCommand{\cs}[1]{\hyperlink{##1}{\texttt{\textbackslash##1}}}
- }
-
- \def\PrintDescribeMacro#1{%
- \edef\macroname{\expandafter\removeslash\detokenize{#1}END}%
- \raisebox{11pt}[11pt]{\hypertarget{Desc@\macroname}{}}
- \origPrintDescribeMacro{#1}
- }
+
+\usepackage{xspace}
+\@namedef{seen@package@latex}{1} %^^A avoid footnotes for 'latex'
+\newcommand*{\pkg}[1]{%
+ \href{http://tug.ctan.org/pkg/#1}{\texttt{#1}}%
+ % URL footnote (for print-out) on first appearance:
+ \@ifundefined{seen@package@#1}{%
+ \footnote{CTAN: \url{http://tug.ctan.org/pkg/#1}}%
+ \@namedef{seen@package@#1}{1}%
+ }{}%
+ \xspace
+}
+\newcommand*{\svnmulti}{%
+ \texttt{svn-multi}\xspace%
+}
+
+% link \cs to macro definitions
+\let\origmacro\macro
+\let\origendmacro\endmacro
+\let\origStopEventually\StopEventually
+\let\origPrintDescribeMacro\PrintDescribeMacro
+\usepackage{xcolor}
+\definecolor{darkred}{rgb}{0.333.0.0,0.0}
+\hypersetup{colorlinks=true,linkcolor=darkred,urlcolor=darkred}
+\definecolor{macrodesccolor}{rgb}{0.0,0.0,0.8}
+\definecolor{macroimplcolor}{rgb}{0.0,0.0,0.4}
+\definecolor{metacolor}{rgb}{0.0,0.4,0.4}
+\definecolor{scriptcolor}{rgb}{0.2,0.6,0.2}
+\definecolor{optioncolor}{rgb}{0.3.0.2,0}
+
+\let\macroline\\
+\newlength{\macrosep}
+\setlength{\macrosep}{-3em}
+\renewcommand{\meta@font@select}{\color{metacolor}\itshape}
+\newcommand{\macroformat}[1]{\textbf{\ttfamily #1}}
+\newcommand{\optionformat}[1]{\textbf{\sffamily #1}}
+\newcommand{\scriptformat}[1]{\textbf{\ttfamily #1}}
+\newcommand{\macroargformat}[1]{\texttt{#1}}
+\newcommand{\scriptargformat}[1]{\textbf{#1}}
+\newcommand{\macrohlinkprefix}{desc}
+\newcommand{\macrolink}{}
+
+\usepackage[T1]{fontenc}
+\usepackage{lmodern}
+
+\def\DescribeMacro{\@ifnextchar*{\DescribeMacroS}{\DescribeMacroN}}
+\def\DescribeMacroN{%
+ \bigskip\pagebreak[3]\par\noindent\DescribeMacroS*%
+}
+\def\DescribeMacroS*#1#2{%
+ \begingroup
+ \g@namedef{href@desc@#1}{}%
+ \immediate\write\@mainaux{%
+ \noexpand\g@namedef{href@desc@#1}{}%
+ }%
+ \@ifundefined{href@impl@#1}%
+ {\let\macrolink\relax}%
+ {\def\macrolink{\hyperlink{impl@#1}}}%
+ \hypersetup{linkcolor=macrodesccolor}%
+ \hspace*{\macrosep}%
+ \raisebox{\baselineskip}[\baselineskip]{\hypertarget{desc@#1}{}}%
+ \macrolink{\macroformat{\textcolor{macrodesccolor}{\textbackslash #1}}}%
+ \noindent\mbox{}\macroargformat{#2}\nopagebreak
+ \macroline*[0.2\baselineskip]%
+ \endgroup
+ \nopagebreak
+ \ignorespaces
+}
+\def\DescribeScript{\@ifnextchar*{\DescribeScriptS}{\DescribeScriptN}}
+\def\DescribeScriptN{%
+ \bigskip\par\pagebreak[2]\noindent\DescribeScriptS*%
+}
+\def\DescribeScriptS*#1#2{%
+ \hspace*{\macrosep}%
+ \raisebox{\baselineskip}[\baselineskip]{\hypertarget{script@#1}{}}%
+ \scriptformat{\textcolor{scriptcolor}{#1}}%
+ \noindent\mbox{}\scriptargformat{\ {#2}}\macroline*[0.2\baselineskip]%
+ \nopagebreak
+}
+\def\DescribeOption{\@ifnextchar*{\DescribeOptionS}{\DescribeOptionN}}
+\def\DescribeOptionN{%
+ \bigskip\par\noindent\DescribeOptionS*%
+}
+\def\DescribeOptionS*#1{%
+ \hspace*{\macrosep}%
+ \raisebox{\baselineskip}[\baselineskip]{\hypertarget{option@#1}{}}%
+ \optionformat{\textcolor{optioncolor}{#1}}%
+ \noindent\mbox{}\macroline*[0.2\baselineskip]%
+ \nopagebreak
+}
+\newcounter{macrolevel}
+\renewenvironment{macro}[1]{%
+ \addtocounter{macrolevel}{1}%
+ \expandafter\macroX\expandafter{\expandafter\@gobble\string#1}%
+}{%
+ \addtocounter{macrolevel}{-1}%
+}
+\providecommand*{\g@namedef}[1]{%
+ \expandafter\gdef\csname #1\endcsname
+}
+\newcommand*{\macroX}[1]{%
+ \ifnum\c@macrolevel<2
+ \smallskip
+ \fi
+ \par\noindent
+ \g@namedef{href@impl@#1}{}%
+ \immediate\write\@mainaux{%
+ \noexpand\g@namedef{href@impl@#1}{}%
+ }%
+ \@ifundefined{href@desc@#1}%
+ {\let\macrolink\relax}%
+ {\def\macrolink{\hyperlink{desc@#1}}}%
+ \hspace*{\macrosep}%
+ \raisebox{\baselineskip}[\baselineskip]{\hypertarget{impl@#1}{}}%
+ \macrolink{\macroformat{%
+ \textcolor{macroimplcolor}{\textbackslash #1}}}%
+ \\*[\smallskipamount]%
+ \@ifnextchar\begin{\vspace*{-\baselineskip}}{\imacroarg}%
+}
+
+\newcounter{macroargs}
+\newcounter{nmacroarg}
+
+\newcommand*{\imacroarg}[1][0]{%
+ \setcounter{macroargs}{#1}%
+ \setcounter{nmacroarg}{1}%
+ \ifnum\c@macroargs>0
+ \expandafter\imacroargX
+ \fi
+}
+\newcommand*{\aftermacroargs}{%
+ \@ifnextchar\begin
+ {\\*[-2ex]\ignorespaces}%
+ {\\*[\smallskipamount]\ignorespaces}%
+}
+\newcommand*{\imacroargX}[1]{%
+ \hspace*{-1em}\texttt{\#\thenmacroarg:} #1\relax
+ \ifnum\c@macroargs>1
+ \newline
+ \fi
+ \addtocounter{nmacroarg}{1}%
+ \addtocounter{macroargs}{-1}%
+ \ifnum\c@macroargs>0
+ \expandafter\imacroargX
+ \else
+ \expandafter\aftermacroargs
+ \fi
+}
+
+
+\def\karg#1{\{\$\textcolor{metacolor}{#1}\$\}}
+\def\kmarg#1{\{\$\meta{#1}\$\}}
+
+\DeclareRobustCommand{\csi}[1]{%
+ \begingroup
+ \hypersetup{linkcolor=macroimplcolor}%
+ \renewcommand{\macrohlinkprefix}{impl}%
+ \@ifundefined{href@impl@#1}%
+ {\let\macrolink\relax}%
+ {\def\macrolink{\hyperlink{impl@#1}}}%
+ \csX{#1}%
+ \endgroup
+}
+\DeclareRobustCommand{\csd}[1]{%
+ \begingroup
+ \hypersetup{linkcolor=macrodesccolor}%
+ \renewcommand{\macrohlinkprefix}{macro}%
+ \@ifundefined{href@desc@#1}%
+ {\let\macrolink\relax}%
+ {\def\macrolink{\hyperlink{desc@#1}}}%
+ \csX{#1}%
+ \endgroup
+}
+\DeclareRobustCommand{\csX}[1]{%
+ \begingroup
+ \macrolink{\texttt{\textbackslash#1}}%
+ \endgroup
+}
+\let\cs\csd
+\DeclareRobustCommand{\css}[1]{\texttt{\textbackslash#1}}
+\DeclareRobustCommand{\op}[1]{%
+ \begingroup
+ \hypersetup{linkcolor=optioncolor}%
+ \hyperlink{option@#1}{\textbf{\sffamily #1}}%
+ \endgroup
+}
+\DeclareRobustCommand{\scr}[1]{%
+ \begingroup
+ \hypersetup{linkcolor=scriptcolor}%
+ \hyperlink{script@#1}{\scriptformat{#1}}%
+ \endgroup
+}
+
+\def\StopEventually#1{\origStopEventually{#1}%
+\let\cs\csi
+}
+
\fi
+\usepackage{graphicx}
+
\EnableCrossrefs
%\DisableCrossrefs
\CodelineIndex
%\PageIndex
\RecordChanges
%\OnlyDescription
+\widowpenalty=500
+\clubpenalty=500
\begin{document}
- \DocInput{svn-multi.dtx}
+ \DocInput{svn-multi.dtx}%
\PrintChanges
+ %\clearpage
\PrintIndex
\end{document}
%</driver>
%<*package>
% \fi
%
-% \CheckSum{641}
+% \CheckSum{2264}
%
% {\makeatother
% \CharacterTable
@@ -116,8 +296,8 @@
% }
% \changes{v1.0}{2006/05/27}{Initial version}
% \changes{v1.1}{2006/06/08}{Added macros to extract and typeset date/time
-% informations. Added macros to set and typeset main URL or filename.}
-% \changes{v1.2}{2007/06/22}{Renamed packet from \texttt{svnkw} to
+% information. Added macros to set and typeset main URL or filename.}
+% \changes{v1.2}{2007/06/22}{Renamed package from \texttt{svnkw} to
% \texttt{svn-multi} to match CTAN directory. Wrapper file
% \texttt{svnkw.sty} is provided for backward compatibility.}
% \changes{v1.3}{2007/07/01}{Added verbatim support. Keywords can now contain
@@ -125,17 +305,19 @@
% keyword check macros to work with verbatim code. \texttt{\textbackslash
% nofiles} is now obeyed.}
% \changes{v1.3a}{2007/07/10}{Fixed issue with unwanted spaces generated by
-% \cs{svnid}, \cs{svnidlong} and \cs{svnkwsave}, \eg when used in a file which is
-% included with \cs{input}}
-% \changes{v1.3b}{2008/12/03}{Changed the way catcodes are modified to be compatible
-% with the french option of the babel package or other packages which modify the
-% list of special characters.}
+% \cs{svnid}, \cs{svnidlong} and \cs{svnkwsave}, \eg when used in a file which
+% is included with \css{input}}
+% \changes{v1.3b}{2008/12/03}{Changed the way catcodes are modified to be
+% compatible with the french option of the babel package or other packages which
+% modify the list of special characters.}
% \changes{v1.4}{2009/02/27}{Added support for timezones with non-zero minute
% part, \eg +0530.}
-% \changes{v1.5}{2009/02/28}{Added \cs{today}-style macros \cs{svntoday} and
+% \changes{v1.5}{2009/02/28}{Added \css{today}-style macros \cs{svntoday} and
% \cs{svnfiletoday}.}
+% \changes{v2.0}{2009/03/23}{New features: keyword groups, external file
+% support, auto-include of images, files as subgroups and table of revisions.}
%
-% \GetFileInfo{svn-multi.sty}
+% ^^A \GetFileInfo{svn-multi.dtx}
%
% \DoNotIndex{\newcommand,\newenvironment,\AtBeginDocument,\AtEndDocument}
% \DoNotIndex{\def,\let,\edef,\xdef,\item,\space,\write,\jobname,\relax,\!}
@@ -145,199 +327,475 @@
% \DoNotIndex{\newcount,\noexpand,\openout,\PackageWarning,\@percentchar}
% \DoNotIndex{\@sanitize,\@makeother,\@iwsvn,\%,\_,\&,\^,\$,\#,\ ,\\,\if@filesw}
% \DoNotIndex{\gdef,\begingroup,\endgroup,\catcode}
+% \DoNotIndex{\^,\ ,\_,\(,\),\$,\&,\#,\@ampersamchar,\AtEndOfPackage}
+% \DoNotIndex{\@backslashchar,\begin,\bgroup,\chapter,\day}
+% \DoNotIndex{\DeclareOption,\do,\dospecials,\@dottedtocline,\egroup}
+% \DoNotIndex{\end,\ExecuteOptions,\filedate,\fileversion,\@for}
+% \DoNotIndex{\futurelet,\g@addto@macro,\global,\@gobbletwo,\hline}
+% \DoNotIndex{\hspace,\if@restonecol,\if@twocolumn,\ignorespaces}
+% \DoNotIndex{\makeatletter,\MakeUppercase,\@mkboth,\month,\@namedef}
+% \DoNotIndex{\NeedsTeXFormat,\newif,\onecolumn,\orig@fink@prepare}
+% \DoNotIndex{\orig@fink@restore,\PackageError,\ProcessOptions}
+% \DoNotIndex{\ProvidesPackage,\renewcommand,\RequirePackage}
+% \DoNotIndex{\@restonecolfalse,\@restonecoltrue,\section,\strut}
+% \DoNotIndex{\tableofcontents,\tableofrevisions,\texttt,\today}
+% \DoNotIndex{\twocolumn,\@undefined,\url,\year}
+% \DoNotIndex{\textwidth,\the,\string,\raggedright,\providecommand,\small,\toks@}
+% \DoNotIndex{\medskipamount,\long,\leftskip,\clearpage,\advance,\addtolength}
+% \DoNotIndex{\DeclareBoolOption,\DeclareStringOption,\DeclareVoidOption}
+% \DoNotIndex{\ProcessKeyvalOptions,\SetupKeyvalOptions}
+% \DoNotIndex{\@firstoftwo,\@secondoftwo,\@gobble}
%
-%
-% \title{The \textsf{svn-multi} package\thanks{This document
-% corresponds to \textsf{svn-multi}~\fileversion, dated \filedate.}
-% \\also known as \textsf{svnkw}}
+% \title{The \textsf{svn-multi} package \\ formerly known as \textsf{svnkw}}
% \author{Martin Scharrer \\ \url{martin@scharrer-online.de} \\
-% \url{http://www.scharrer-online.de/latex/svn-multi}}
+% \url{http://www.scharrer-online.de/latex/svn-multi}\\
+% CTAN: \url{http://tug.ctan.org/pkg/svn-multi}}
+% \date{Version \expandafter\@gobble\fileversion\\[0.5ex]\today}
%
% \ifpdf
-% \hypersetup{
-% pdfauthor={Martin Scharrer <martin@scharrer-online.de>},
-% pdftitle={The svn-multi package also known as svnkw},
-% pdfsubject={Documentation of LaTeX package svn-multi which allows the
-% typesetting of Subversion keywords in multi-file LaTeX documents},
-% pdfkeywords={svn-multi, svnkw, LaTeX, Subversion, keywords, Version
-% Control, Id}
-% }
+% \hypersetup{%
+% pdfauthor = {Martin Scharrer <martin@scharrer-online.de>},
+% pdftitle = {The svn-multi package, \fileversion, r\filerev\ from
+% \filedate},
+% pdfsubject = {Documentation of LaTeX package svn-multi which allows the
+% typesetting of Subversion keywords in multi-file LaTeX
+% documents},
+% pdfkeywords = {svn-multi, svnkw, LaTeX, Subversion, keywords, Version
+% Control, Id, Table Of Revisions}
+% }%
% \fi
% \maketitle
%
-% \section{Package naming}
-% The authors first choice for this package was |svnkw| but the CTAN
-% maintainer suggested a more descriptive name and put the package in the
-% |svn-multi|\footnote{CTAN:
-% \url{http://www.ctan.org/tex-archive/macros/latex/contrib/svn-multi/}}
-% directory. Therefore the style file got renamed to |svn-multi|, but a
-% |svnkw| dummy style file is still provided for backward compatibility.
-%
% \section{Introduction}
-% This package lets you typeset keywords of the version control system Subversion\footnote
-% {Subversion homepage: \url{http://subversion.tigris.org/}} (svn), which is the successor of the popular CVS,
-% inside your \LaTeX{} files anywhere you like.
-% Unlike the very similar package
-% |svn|\footnote{CTAN:
-% \url{http://www.ctan.org/tex-archive/macros/latex/contrib/svn/}} the usage of
-% multiple files for one \LaTeX{} document is well supported. The package
-% acquires the keywords of the last changed file and provides them to the user
-% through macros. The package has to read all keywords of all files first and
-% writes the most recent values in an auxiliary file with an `.svn'
-% extention. This file is read back at the next \LaTeX{} run which introduces a
-% delay like by the table of contents. The standard \LaTeX{} switch |\nofiles|
-% can be used to suppress the file generation. Macros to typeset the keywords
-% of the current |include|d or |input|ed \LaTeX{} file are also provided.
+% This package allows to typeset version control (VC) information provided by
+% Subversion\footnote{Subversion homepage: \url{http://subversion.tigris.org/}}
+% keywords (\eg |$||Id: ... $|) in \LaTeX\ documents which can contain of
+% multiple |.tex| files included using |\include| or |\input|.
+% Subversion is a modern version control system designed to replace its
+% predecessor CVS and uses integers as revision numbers.
%
+% This package reads the keywords of all files and provides the VC information
+% of of the most recent changed file of the document to the user through a set
+% of macros. This information is written to an auxiliary |.svn| file during the
+% first \LaTeX\ run and read back at the next which introduces the same delay
+% known from the table of contents. The standard \LaTeX{} switch |\nofiles| can
+% be used to suppress the file generation.
+%
+% In addition to this basic functionality several more features are provided:
+% \begin{itemize}
+% \item Macros to typeset the VC information of the current source file.
+% \item Access of all parts of the VC date.
+% \item Formatting of author names or revision numbers.
+% \item Definition of groups and subgroups.
+% \item Including of the VC information of external files.
+% \item Table of Revisions.
+% \end{itemize}
+%
+% \subsection{Scope of Keywords}
+% This package provides the Subversion keyword data in several different scopes:
+% document-global, file-local and, new with v2.0, by group.
+%
+% \subsubsection*{Document Global}
+% The document global macros, like \cs{svnrev}, return the latest version
+% control information (keyword data) for the whole multi-file document, \ie the
+% information of the latest changed file of the document. To collect, sort and
+% provide this information is the main functionality of this package.
+%
+% \subsubsection*{Local to Current File}
+% There are also file-local macros, \eg \cs{svnfilerev}, which return the
+% version control information of the current file, \ie the file they are used
+% in. It is assumed here that every file using this macros calls first either a
+% \cs{svnid} or \cs{svnidlong} macro or both. See section~\ref{sec:usage:id}
+% for more details about the id macros. Please note that the file-local macros
+% technically actually return the \emph{last registered} information from the
+% last \cs{svnid} or \cs{svnidlong}. As long the \op{filehooks} option (new in
+% v2.0) is not enabled (explicit or implicit) this keyword macros will leak from
+% one file over to the next. This will cause wrong results if they are used in
+% a file before or without any id macros. With this option the macros will be
+% reset at the beginning of every source file of the document.
+%
+% \subsubsection*{Groups}
+% Version 2.0 introduces the concept of groups. Several files of a multi-file
+% \LaTeX\ document can be grouped together and the latest version control
+% information of all files of a group is provided by macros. This works in the
+% same way as the global macros mentioned above but only with the files in the
+% group. It can also be seen from the other side: the macros are local like the
+% file-local macros mentioned above but for all files of the group, not only the
+% current one.
+%
+% These groups could also be called \textit{file groups}, \textit{keyword
+% groups} or, like in programming languages, \textit{namespaces}. In this manual
+% they will be reference as simple \textit{groups} most the time. In places
+% where they could be confused with \TeX\ groups (|{ }|, |\begingroup|
+% |\endgroup|), \eg ``in the current group'' or ``group local'', they will be
+% called \textit{keyword groups}.
+%
+% There is no limitation (besides internal \LaTeX\ resource limits) for the
+% number of different groups. The files of one group do not have to be included
+% in a row but can be included everywhere in the document. The version control
+% information of the current group can be typeset with macros like \cs{svncgrev}
+% (|cg| for \emph{current group}). Also, a general but less robust macro
+% \cs{svng}\marg{group name}\marg{key} is provided to access others groups by
+% name everywhere in the document. To avoid some macro robustness problems the
+% current group can be changed locally for the output macros using
+% \cs{svnsetcg}\marg{group name}.
+%
+% See section~\ref{sec:group} for further details and usage instructions on
+% group macros.
%
% \section{Usage}
+% The version control information are provided by Subversion keywords which
+% first need to be read in by dedicated macros and can then be typeset using
+% different macros.
+%
+% \subsection{Package Options}
+% Since v2.0 this package provides options to enable only a needed features, \eg
+% to avoid problems with other packages or save \TeX\ memory. For backwards
+% compatibility to pre-2.0 package versions all old features are enabled by
+% default and all new features are disabled to save a little of \TeX\ memory.
+%
+% All options except the first two are boolean key=value options (so far) and
+% await either `|true|' or `|false|' as value. A missing value means `|true|'.
+% So \eg |[groups=true,verbatim=false,external]|, enables the \op{external} and
+% \op{groups} options but disables the \op{verbatim} option.
+%
+% The available options are:\par
+%
+% \DescribeOption{old}
+% Only pre-v2.0 features are active. This enables \op{verbatim} and disables all
+% other options below. This is the default for reasons mentioned above.
+%
+% \DescribeOption{all}
+% Activates all features of the package.
+%
+% \DescribeOption{verbatim}
+% Controls the verbatim mode of the keyword parser macros. Normally verbatim
+% mode is very much wanted to support strange characters in URLs and file names,
+% but this options gives the user a possibility to disable verbatim, \eg for
+% trouble shooting. Please note that verbatim mode is needed in order to make
+% \svnmulti work with some packages, like \pkg{babel} with the |french| option.
+%
+% \DescribeOption{external}
+% Controls the support for keywords from external files described in
+% section~\ref{sec:external}. An old |.svn| file should be removed when this
+% feature is deactivated to avoid \textit{undefined macro} errors caused by
+% macros placed there by this feature.
+%
+% If the \op{groups} option is enabled the macro
+% \csi{svnexternalgroup}\marg{group name} can be used to declare a own group
+% which is used for all the external files. Otherwise they are placed in the
+% currently active group. This macro can be used several times during the
+% document where an empty argument means \emph{no group} and a `|*|' means
+% \emph{current group}.
+%
+% \DescribeOption{groups}
+% Controls the keyword groups feature described in section~\ref{sec:group}.
+%
+% \DescribeOption{subgroups}
+% Controls the automatic declaration of all input files as subgroups so that
+% there keyword information can be typeset inside other files. The group name is
+% the file path without the file extension (`|subdir/filebase|').
+% It is possible to disable and re-enable this using \cs{svnsubgroupsfalse} and
+% \cs{svnsubgroupstrue} during the document preamble or body to exclude certain
+% files. See section~\ref{sec:subgroups} for additional information.
+%
+% \DescribeOption{graphics}
+% This option allows to automatically declare all images included using the
+% macro |\includegraphics| from the \pkg{graphics}/\pkg{graphicx} package as
+% external files (see section~\ref{sec:external}). The options \op{external} and
+% \op{autoload} are activated by this option so that the produced |.svx| files
+% are loaded automatically. An |autoload=false| option after \pkg{graphics}
+% will deactivate this, but then an \cs{svnexternal} macro must be included in
+% all \LaTeX\ files which should take the image revisions into account.\par The
+% \pkg{graphics} package is loaded if this option is active. If this package is
+% needed with some special options it should be loaded by the \LaTeX\ document
+% before \svnmulti.\par Please note that this feature needs to tie itself into
+% the \pkg{graphics} package and might fail if the internal structure of this
+% package changes in future versions.
+%
+% If the \op{groups} option is enabled the macro
+% \csi{svngraphicsgroup}\marg{group name} can be used to declare a own group
+% which is used for all the graphic files (also for pgf images, see below).
+% Otherwise they are placed in the group specified by \cs{svnexternalgroup}
+% which defaults to the currently active group. This macro can be used several
+% times during the document where an empty argument means \emph{no group} and a
+% `|*|' means \emph{current group}.\par Some graphics like logos can appear
+% frequently in a document. Do not count them as part of each chapter they can
+% be ignored using \csi{svnignoregraphic}\marg{file path}. The macro
+% \csi{svnconsidergraphic}\marg{file path} disables this again. Such graphics
+% can be then included manually using an explicit \cs{svnexternal} macro.
+%
+% \DescribeOption{pgfimages}
+% Identical to like the \op{graphics} option but for the \pkg{pgf} package
+% (implemented against the version from 2008/01/15) with the |\pgfuseimage| and
+% |\pgfimage| macros. Please also see the notes about package loading and ties
+% mentioned above.
+%
+% \DescribeOption{autoload}
+% Controls automatic loading of corresponding |.svx| files at the begin of files
+% included using |\input| or |\import|. This avoids the need of putting an
+% \cs{svnexternal} macro in every file just to load the |.svx| files created
+% automatically by the \op{graphics} option. The option \op{external} is
+% activated by \op{autoload}.
+%
+% \DescribeOption{table}
+% Controls the generation of a table of revisions which can be included using
+% the \cs{tableofrevisions} macro. This table shows the revisions of all files
+% and groups. This needs \op{groups} to work which is activated with \op{table}.
+% Enable \op{subgroups} to include a list of all files per group. See the
+% section~\ref{sec:table} for more information.
+%
+% \DescribeOption{filehooks}
+% This option loads the \pkg{fink} package and installs at-begin-input-file and
+% at-end-input-file hooks which are needed for many of the options above. While
+% this option is enabled automatically if needed it can be also enabled
+% manually to ensure that the file-local macros are reset to empty values at
+% the begin of each input file. This prevents the keyword from leaking over
+% from one file to the next. After every subfile the file-local keyword macros
+% are also restored to the value of the parent file.
+%
+% \subsection{Including Subversion Keywords}\label{sec:usage:id}
+% Subversion keywords are included using \cs{svnid} or \cs{svnidlong}. These
+% macros should be written very early in each file, \ie in the preamble of the
+% main document soon after |\documentclass| and |\usepackage{svn-multi}| and as
+% first in \emph{every} subfile before an |\chapter| or similar macro. They do
+% not create any output. See section~\ref{sec:kwaccess} to learn how to typeset
+% the keyword values.
+%
+% \DescribeMacro{svnid}{\karg{Id}}
+% The macro is for the |Id| keyword and must be written like shown. A trailing
+% colon with or without spaces after the `|Id|' is also valid but
+% \textbf{everything else} except a valid Subversion string will cause a \TeX{}
+% parse error. The subversion property |svn:keywords| must be set on all source
+% files and include `|Id|' so that Subversion will expand it at the next commit.
+%
+% \DescribeMacro{svnidlong}{\ignorespaces
+% \\\hspace*{\macrosep}\karg{HeadURL}\ignorespaces
+% \\\hspace*{\macrosep}\karg{LastChangedDate}\ignorespaces
+% \\\hspace*{\macrosep}\karg{LastChangedRevision}\ignorespaces
+% \\\hspace*{\macrosep}\karg{LastChangedBy}}
+% Macro for a ``long Id''. Saves similar values like in `|Id|' but from the
+% above four keywords. The usage of \cs{svnid} or \cs{svnidlong} is a matter of
+% taste. The second is more readable inside the code and results in a nicer date
+% and a full URL, not only the filename. However, both can also be used
+% together. In this case the \cs{svnid} macro should be come last. Because its
+% revision is not higher (but identical) than the revision of the \cs{svnidlong}
+% macro it does not override its values. This way both the full time zone from
+% the long and the file name from the short id macro can be accessed. Please
+% note that all features from the 2.0 version load the \pkg{fink} package which
+% lets you typeset the current file name anyway using
+% |\finkbase.\finkext|\footnote{The file name in \texttt{\${}Id\$} is always the
+% original Subversion file name while the one given by the \pkg{fink} package is
+% the current file name. Both could differ if the file got renamed.}.
%
-% \subsection{Including of the Subversion keywords}
-% To include your Subversion Id keywords use \cs{svnid} or \cs{svnidlong}.
-% This macros should be written very
-% early in each file, \ie in the preamble of the main document soon after
-% |\documentclass| and |\usepackage{svn-multi}| (or, outdated,
-% |\usepackage{svnkw}|) and as first in \emph{every} |\include|d
-% subfile before the |\chapter| macro. They do not create any output.
-% See section~\ref{sec:kwaccess} to learn how to typeset the keyword values.
-%
-% \DescribeMacro{\svnid}
-% Macro for the svn Id keyword.
-% Write the macro as |\svnid{$||Id$}| into your \LaTeX{} files. A trailing colon
-% with spaces after the |Id| is also valid but \textbf{everything else} except
-% a valid Subversion string will cause a \TeX{} parse error.
-% Don't forget to set the subversion property |svn:keywords| of the files
-% to at least `|Id|'. Subversion will expand it at the next commit.
-% Please note that because the value is read verbatim the macro should exactly be
-% written like above. Spaces, newlines or comments between |\svnid| and
-% the \{ will lead to \TeX{} parse errors.
-%
-% \DescribeMacro{\svnidlong}
-% Macro for a ``long Id''.
-% Saves similar values like in `|Id|' but from the keywords
-% |HeadURL|, |LastChangedDate|, |LastChangedRevision| and |LastChangedBy|.
-% The usage of \cs{svnid} or \cs{svnidlong} is a matter of taste. The second is
-% more readable inside the code and results in a nicer date and a full URL,
-% not only the filename. Both can also be used together.
-%
-% Write this macro like this (order of arguments not meaningfull)\\[2ex]
-% |\svnidlong|\\
-% |{$||HeadURL$}|\\
-% |{$||LastChangedDate$}|\\
-% |{$||LastChangedRevision$}|\\
-% |{$||LastChangedBy$}|\\[2ex]
-% in your files and set the subversion
-% property |svn:keywords| of them
-% to\\`|HeadURL LastChangedDate LastChangedRevision LastChangedBy|'.
-%
-% Please note that the arguments are read verbatim. Special precaution are
-% taken to allow spaces, newlines and comments direct after the |\svnidlong|
-% and after each of the four arguments, just in case someone need this.
-% In fact everything not inside braces \{ \} is ignored.
-%
-% The two macros above are sufficient for the operation of |svn-multi| but
-% the following macros are provided for additional or alternative keyword
-% handling.
-%
-% \DescribeMacro{\svn}
-% \DescribeMacro{\svn*}
-% This macro let you typeset svn keywords directly. The only argument is
-% the svn keyword in the usual dollars. The dollars will be stripped
-% and the rest is typeset as normal text. The star version strips also the
-% space before the last dollar.
-% This macro alone was the very first version of |svnkw| and is still included
-% for fast and simple keyword typesetting.
-%
-% \DescribeMacro{\svnkwsave}
-% This macro lets you include and save any keyword you like. The syntax is
-% |\svnkwsave|\{\$\meta{keyword}\$\}. The keyword can be already expanded or
-% not (no value and only ``|:|'' or nothing after the key name). This macro is
-% also used internally and does not create any output.
+% This macro must be written like seen above while the order of arguments is not
+% meaningfull. The Subversion property |svn:keywords| must be set on all source
+% files with an value which includes `|HeadURL| |LastChangedDate|
+% |LastChangedRevision| |LastChangedBy|' or one of their alternative spellings
+% (\eg `|URL|', `|Rev|', `|Date|', etc.).
+%
+% Please note that the arguments are read verbatim as long the \op{verbatim}
+% option is not disabled explicitly. Special precaution are taken to allow
+% spaces, newlines and comments direct after the |\svnidlong| and after each of
+% the four arguments. In fact everything not inside braces |{ }| is ignored.
+%
+% \DescribeMacro{svn}{\kmarg{keyword}}
+% \DescribeMacro*{svn*}{\kmarg{keyword}}
+% This macro let you typeset svn keywords directly. The dollars will be stripped
+% and the rest is typeset as normal text. The star version strips also the space
+% before the last dollar. This macro alone was the very first version of
+% |svnkw| and is still included for fast and simple keyword typesetting.
+%
+% \DescribeMacro{svnkwsave}{\kmarg{keyword}}
+% This macro lets you include and save any keyword you like. The keyword can be
+% already expanded or not (no value and only ``|:|'' or nothing after the key
+% name). This macro is also used internally and does not create any output.
% Please note that the argument is read verbatim and that there should be no
% space between the macro and the argument's left brace.
%
-% \subsection{Typesetting the keyword values}\label{sec:kwaccess}
-% The following macros can be used to typeset the keyword values anywhere in
-% the document. Please note that note all \LaTeX{} fonts have all special
-% characters, \eg `\_' is not provided in the standard roman font. To proper
-% typeset filename and URL containing these letters you can use either
-% texttyper font (|\texttt|) or use |{\urlstyle{rm}\svnnolinkurl{...}}| which
-% needs the |hyperref| package.
-%
-% Like already mentioned |svn-multi| knows two groups of keywords. The first
-% group contains of the keywords for the whole document which hold the values
-% of the most recent committed file, the second contains of the \emph{current}
-% or \emph{file local} keywords, \eg the keywords of the current file.
-%
-% \DescribeMacro{\svnrev}
-% \DescribeMacro{\svndate}
-% \DescribeMacro{\svnauthor}
-% These macros hold the keyword values of the whole document, \ie of the
-% most recent revision. They can be used everywhere in every file of the
-% \LaTeX{} document, after |\usepackage{svn}| of course. Please see
+% \subsection{Groups}\label{sec:group}
+% Starting with v2.0 files can be grouped together and the keyword values of the
+% latest revision of a group can be accessed. Use the \op{groups} option to
+% activate these macros.
+%
+% \DescribeMacro{svngroup}{\marg{group name}}
+% This macro declares all following files until the next \cs{svngroup} as part
+% of the given keyword group. It can be placed inside the main file before some
+% |\include|/|\input| macros or inside subfiles before the id macros, \ie direct
+% at the start of the file.
+%
+% The changes done by this macro are \TeX\ global, \ie there can't be caught
+% using \TeX\ groups (|{ }|). However, in order to prevent subfiles to change
+% the group of the rest of the parent file the group will be restored to the
+% previous one at the end of each input file.
+%
+% The latest VC information of a group can be typeset with the |\svnvgXXX|
+% macros or the \cs{svng} macro shown in section~\ref{sec:kwaccess}.
+%
+% \DescribeMacro{thesvngroup}{}
+% Returns the name of the current keyword group.
+%
+% \DescribeMacro{svnsetcg}{\marg{group name}}
+% Normally the |\svncgXXX| macros mentioned below use the last keyword
+% group defined by \cs{svngroup} but this can be changed using the \cs{svnsetcg}
+% macro. The idea behind it is that the currently selected group can be
+% changed locally to the current \TeX\ group for the keyword output macros
+% |\svncgXXX| only while the group for the keyword input macros like \cs{svnid}
+% is unaffected.
+%
+% To reset the used group to the last one defined by \cs{svngroup} simply use
+% \cs{svnsetcg} with an `|*|' as argument.
+%
+% \paragraph*{Example 1:} |{\svnsetcg{abc}\svnFullAuthor{\svncgauthor}}|\\ would
+% output the full author's name of group \textit{abc}.\par
+% \paragraph*{Example 2:} To typeset the three keyword values of group
+% \textit{abc} somewhere outside this group use:\\
+% |{\svnsetcg{abc}Rev: \svncgrev\\||Date: \svncgdate\\|\\{}
+% |Author: \svncgauthor\\}|
+% \paragraph*{Example 3:} To typeset the date of group \textit{abc} outside of
+% this group in the format of |\today| use: |{\svnsetcg{abc}\svncgtoday}|
+% \smallskip
+%
+% \DescribeMacro{thesvncg}{}
+% Returns the name of the current group selected by \cs{svnsetcg}.
+%
+% \subsubsection{Files as Subgroups}\label{sec:subgroups}
+% The group feature could be used to access the version control information of
+% single files anywhere in the document when these are defined as own groups for
+% themselves. Because a file can only be in one group this would not be
+% compatible with the normal usage of the group feature. Therefore a special
+% feature was introduced to automatically or manually define a file as subgroup
+% for itself which does not influence its membership in a normal group.
+% \paragraph{Declaration:}
+% This feature is enabled by the \op{subgroups} option. All files of the
+% document are then automatically declared as extra groups. This can be disabled
+% for parts of the document using \csi{svnsubgroupsfalse} and re-enabled
+% using \cs{svnsubgroupstrue} macros. The current file can be manually
+% declared as extra group with the \cs{svnsubgroup} macro.\par
+% \DescribeMacro{svnsubgroup}{}
+% This macro declares the current file as subgroup. It is used automatically for
+% every subfile if \op{subgroups} and \csi{svnsubgroupstrue} are enabled.
+%
+% \paragraph{Exclude/Consider files extensions:}
+% The above mentioned automatically group declaration uses an hook which is
+% triggered every time another file is read by the document. This unfortunately
+% includes other packages, some auxiliary files and font, config and other files
+% read in by this packages. An internal filter is in place to ignore this files
+% by their file extension. This filter can by modified by the two following
+% macros.
+% \DescribeMacro{svnignoreextensions}{\marg{comma separated list of extension
+% without leading dot}}
+% Tells \svnmulti to ignore the following file extension and never declare files
+% with them as extra groups.
+% \DescribeMacro{svnconsiderextensions}{\marg{comma separated list of extension
+% without leading dot}}
+% Tells \svnmulti to (re-)consider the following file extension and declare
+% files with them as extra groups if read in.
+%
+% \paragraph{Typesetting:}
+% The keyword information of the subgroups (subfile including any included
+% external files or subsubfiles) can be typeset using the normal group typeset
+% macros mentioned below where the group name is the file path without
+% extension. The keyword information of the |.tex| file alone can be typeset
+% with the full file path including extension.
+% \paragraph{Example:} |\svnsetcg{subdir/some_file.tex}\svncgrev| would typeset
+% the revision of the file |some_file.tex| while
+% |\svnsetcg{subdir/some_file}\svncgrev| would typeset the latest revision of
+% the same file or any subfile or declared external file included by it.
+%
+%
+% \subsection{Typesetting the Keyword Values}\label{sec:kwaccess}
+% The following macros can be used to typeset the keyword values anywhere in the
+% document. Please note that not all \LaTeX{} fonts have all special
+% characters, \eg `|_|' is not provided in the standard roman font. To proper
+% typeset file names and URLs containing these letters you can use either
+% teletype font (|\texttt|) or use |{\urlstyle{rm}\svnnolinkurl{...}}| which
+% requires the \pkg{hyperref} package.
+%
+% Like already mentioned \svnmulti knows three scopes of keywords. The first
+% contains of the keywords for the complete document which hold the values of
+% the most recent committed file and the second contains of the \emph{current}
+% or \emph{file local} keywords, \eg the keywords of the current file. Only this
+% two are described here while the third scope is described in
+% section~\ref{sec:group}.
+%
+% \DescribeMacro{svnrev}{}
+% \DescribeMacro*{svndate}{}
+% \DescribeMacro*{svnauthor}{}
+% These macros hold the keyword values of the whole document, \ie of the most
+% recent revision. They can be used everywhere in every file of the \LaTeX{}
+% document, after |\usepackage{svn}| of course. Please see
% section~\ref{sec:date} how to typeset parts of the date.
%
-% \DescribeMacro{\svnfilerev}
-% \DescribeMacro{\svnfiledate}
-% \DescribeMacro{\svnfileauthor}
-% These macros hold the keyword values of the current \LaTeX{} file, but
-% only if it contains a \cs{svnid} or \cs{svnidlong} macro. Otherwise
-% the macros hold still the values of the last file. Please see
+% \DescribeMacro{svnfilerev}{}
+% \DescribeMacro*{svnfiledate}{}
+% \DescribeMacro*{svnfileauthor}{}
+% These macros hold the keyword values of the current \LaTeX{} file, but only if
+% it contains a \cs{svnid} or \cs{svnidlong} macro. Otherwise the macros hold
+% either zero values or the values of the last file dependent on whether an
+% option is enabled which enabled the \pkg{fink} package. Please see
% section~\ref{sec:date} how to typeset parts of the date. See \cs{svnkw} below
% for all other keywords.
%
-% \DescribeMacro{\svntoday}
-% \DescribeMacro{\svnfiletoday}
-% This macros typeset the document-global or file-local date, respectively,
-% using the format of |\today| which depends on the used language. To adjust the
-% language of your document use the |babel| package.
-%
-% \DescribeMacro{\svnmainurl}
-% \DescribeMacro{\svnmainfilename}
-% The macro |\svnmainurl| and |\svnmainfilename| hold the URL and the filename
-% of the main \LaTeX{file} as long the keywords |HeadURL| or |Id| were used in
-% it, respectively.
-% These can be used to typeset this information anywhere in the document
-% which might be more descriptive as the name of the current file (which can
-% be typeset with |\svnkw{HeadURL}| or |\svnkw{Filename}| after \cs{svnid} or
-% \cs{svnidlong}, respectively).
-%
-% \DescribeMacro{\svnsetmainfile}
-% This will declare the current file as the main LaTeX
-% file by defining the above macros. It will automatically be called at the
-% end of the preamble so the user normally doesn't have to use it by him- or
-% herself as long it isn't needed in the preamble. \par
-% Please note that this macro changes the definition of |\svnmainurl| and
-% |\svnmainfilename| directly without going over the auxiliary file. Calling
-% it in several files will make this two macros inconsistent.
-%
-% \DescribeMacro{\svnkw}
-% All keywords saved with \cs{svnid}, \cs{svnidlong} or \cs{svnkwsave} can be typeset
-% by this macro which is a holdover of pare-multi-file times of this package.
-% It takes one argument which must be a subversion keyword name. It
-% then returns the current value of this keyword or nothing (|\relax|) when
-% the keyword was not set yet.
+% \DescribeMacro{svncgrev}{}
+% \DescribeMacro*{svncgauthor}{}
+% \DescribeMacro*{svncgdate}{}
+% These macros return keyword values of the currently selected keyword group.
+% In order to hold them robust, which is important to use them in macros like
+% \cs{svnFullAuthor}, they do not provide any arguments to select other groups
+% than the current one. To access keyword values of other groups use the general
+% macro \cs{svng} or change the locally selected keyword group using the macro
+% \cs{svnsetcg}.
+%
+% \DescribeMacro{svng}{\marg{group name}\marg{key}}
+% This macro is a general form of the |\svncgXXX| macro mentioned above.
+% The first argument is the requested keyword group, the second one the
+% requested keyword in the form of |rev|, |date|, |author|, |year|, etc.. Please
+% note that this macro can not be used inside macros like \cs{svnFullAuthor}.
+%
+%
+% \DescribeMacro{svnmainurl}{}
+% \DescribeMacro*{svnmainfilename}{}
+% The macro \cs{svnmainurl} and \cs{svnmainfilename} hold the URL and the
+% filename of the main \LaTeX{file} as long the keywords |HeadURL| or |Id| were
+% used in it, respectively. These can be used to typeset this information
+% anywhere in the document which might be more descriptive as the name of the
+% current file (which can be typeset with \cs{svnkw}|{HeadURL}| or
+% \cs{svnkw}|{Filename}| after \cs{svnid} or \cs{svnidlong}, respectively).
+%
+% \DescribeMacro{svnsetmainfile}{}
+% This will declare the current file as the main LaTeX file by defining the
+% above macros. It will automatically be called at the end of the preamble so
+% the user normally doesn't have to use it by him- or herself as long it isn't
+% needed in the preamble.\par Please note that this macro changes the
+% definition of \cs{svnmainurl} and \cs{svnmainfilename} directly without going
+% over the auxiliary file. Calling it in several files will make this two macros
+% inconsistent.
+%
+% \DescribeMacro{svnkw}{\marg{keyword name}}
+% All keywords saved with \cs{svnid}, \cs{svnidlong} or \cs{svnkwsave} can be
+% typeset by this macro which is a holdover from a very early version of this
+% package when multiple files where not supported. It takes one argument which
+% must be a subversion keyword name. It then returns the current value of this
+% keyword or nothing (|\relax|) when the keyword was not set yet.
% Examples:\\
% \indent\indent |\textsl{Revision: \svnkw{Revision}}|\\
% \indent\indent |URL: \url{\svnkw{HeadURL}}|\\
-% In the second example |\url| (|hyperref| package) is used to add a
-% hyperlink and to avoid problems with underscores (|_|) inside the URL.
-% |svn-multi| is also providing a macro \cs{svnnolinkurl} which works like |\url|
-% but doesn't adds an hyperlink. See the description of this macro for more
-% details.
+% In the second example |\url| (\pkg{hyperref} package) is used to add a hyperlink
+% and to avoid problems with underscores (|_|) inside the URL. \svnmulti is
+% also providing a macro \cs{svnnolinkurl} which works like |\url| but doesn't
+% adds an hyperlink. See the description of this macro for more details.
%
% If the given keyword doesn't exists a package warning is given to allow
-% spelling errors to be tracked down. This doesn't work well when \cs{svnkw}
-% is used inside |\url|. In this case the
-% warning code will be typeset(!) verbatim into the document by |\url|.
-%
-% \DescribeMacro{\svnkwdef}
-% This macro is used to define the keyword values, \ie
-% \cs{svnkwdef}\marg{keyword}\marg{value}. This is normally only
-% called internally but could be used by the user to override single keywords.
-% The values can then be typeset by \cs{svnkw}.
-% Note that this macro has no influence on the calculation of the latest
-% revision.
+% spelling errors to be tracked down. This doesn't work well when \cs{svnkw} is
+% used inside |\url|. In this case the warning code will be typeset(!) verbatim
+% into the document by |\url|.
+%
+% \DescribeMacro{svnkwdef}{\marg{keyword name}\marg{value}}
+% This macro is used to define the keyword values. This is normally only called
+% internally but could be used by the user to override single keywords. The
+% values can then be typeset by \cs{svnkw}. Note that this macro has no
+% influence on the calculation of the latest revision.
%
% Note that for \cs{svnkw} and \cs{svnkwdef} all different names for one keyword
% are valid and result in the access of the same variable. So \eg subversion
@@ -345,54 +803,62 @@
% macros. You can \eg say |\svnkwdef{Rev}{123}| and then typeset it with
% |\svnkw{Revision}| or |\svnkw{LastChangedRev}| if you like.
%
-% \subsubsection{Accessing Date Values}\label{sec:date}
-% \DescribeMacro{\svnfileyear}
-% \DescribeMacro{\svnfilemonth}
-% \DescribeMacro{\svnfileday}
-% \DescribeMacro{\svnfilehour}
-% Whenever the date information is read, \ie by |\svnkwsave{LastChangedDate}|
-% |\svnkwsave{Date}|, \cs{svnidlong} or \cs{svnid}, the following macros are
-% set to the appropriate date parts for the current file (the |\svnfile...|
-% versions) and for the whole document.
-%
-% \iffalse Put here and not above to avoid 'to many floats' error. \fi
-% \DescribeMacro{\svnfileminute}
-% \DescribeMacro{\svnfilesecond}
-% \DescribeMacro{\svnfiletimezone}
-% \DescribeMacro{\svnfiletimezonehour}
-% \DescribeMacro{\svnfiletimezoneminute}
-% Please note that the hour and timezone are dependend on the keyword which
-% defines the date informations. The hour will be in UTC aka Zulu-time, \ie
+% \subsection{Accessing Date Values}\label{sec:date}
+% \begin{tabular}{@{}l@{\hspace{-2\macrosep}}l@{\hspace{-2\macrosep}}l@{}}\\
+% \DescribeMacro*{svnyear}{}&
+% \DescribeMacro*{svnfileyear}{}&
+% \DescribeMacro*{svncgyear}{}\\
+% \DescribeMacro*{svnmonth}{}&
+% \DescribeMacro*{svnfilemonth}{}&
+% \DescribeMacro*{svncgmonth}{}\\
+% \DescribeMacro*{svnday}{}&
+% \DescribeMacro*{svnfileday}{}&
+% \DescribeMacro*{svncgday}{}\\
+% \DescribeMacro*{svnhour}{}&
+% \DescribeMacro*{svnfilehour}{}&
+% \DescribeMacro*{svncghour}{}\\
+% \DescribeMacro*{svnminute}{}&
+% \DescribeMacro*{svnfileminute}{}&
+% \DescribeMacro*{svncgminute}{}\\
+% \DescribeMacro*{svnsecond}{}&
+% \DescribeMacro*{svnfilesecond}{}&
+% \DescribeMacro*{svncgsecond}{}\\
+% \DescribeMacro*{svntimezone}{}&
+% \DescribeMacro*{svnfiletimezone}{}&
+% \DescribeMacro*{svncgtimezone}{}\\
+% \DescribeMacro*{svntimezonehour}{}&
+% \DescribeMacro*{svnfiletimezonehour}{}&
+% \DescribeMacro*{svncgtimezonehour}{}\\
+% \DescribeMacro*{svntimezoneminute}{}&
+% \DescribeMacro*{svnfiletimezoneminute}{}&
+% \DescribeMacro*{svncgtimezoneminute}{}\\
+% \end{tabular}
+% \\*[\medskipamount]
+% Whenever the date information is read, \ie by
+% \cs{svnkwsave}|{LastChangedDate}| \cs{svnkwsave}|{Date}|, \cs{svnidlong} or
+% \cs{svnid}, the following macros are set to the appropriate date parts for the
+% current file (the |\svnfile...| versions) and for the whole document.
+%
+% Please note that the hour and timezone are dependent on the keyword which
+% defines the date information. The hour will be in UTC aka Zulu-time, \ie
% timezone +0000, when the date comes from the |Id| keyword.
-% \iffalse Put here and not above to avoid 'to many floats' error. \fi
-% \DescribeMacro{\svnyear}
-% \DescribeMacro{\svnmonth}
-% \DescribeMacro{\svnday}
-% \DescribeMacro{\svnhour}
% Otherwise the hour and timezone will be in local time.
% To avoid confusion the |Id| and |Date|/|LastChangedDate| keywords, \eg
% \cs{svnid} and \cs{svnidlong}, should not be intermixed and/or the timezone
% should always be typeset together with the time.
%
-% \iffalse Put here and not above to avoid 'to many floats' error. \fi
-% \DescribeMacro{\svnminute}
-% \DescribeMacro{\svnsecond}
-% \DescribeMacro{\svntimezone}
-% \DescribeMacro{\svntimezonehour}
-% \DescribeMacro{\svntimezoneminute}
-% Starting with v1.4 of |svn-multi| the timezone macros return the full
+% Starting with v1.4 of \svnmulti the timezone macros return the full
% timezone, \ie sign, hour and minute part, \eg |+0100|, not only the sign and
-% hour. The new macros % |\svntimezonehour|/|\svnfiletimezonehour| and
-% |\svntimezoneminute|/\linebreak[3]|\svnfiletimezoneminute| can be used to access only the
-% hour including sign or the minute part, respectively.
+% hour. The new macros % \cs{svntimezonehour}/\cs{svnfiletimezonehour} and
+% \cs{svntimezoneminute}/\linebreak[3]\cs{svnfiletimezoneminute} can be used to
+% access only the hour including sign or the minute part, respectively.
%
% Older versions of this manual assumed the minute part as always |00| and
-% suggested to add it manually if needed: |\svnfiletimezone00| or |\svntimezone00|.
-% In order not to ``break'' documents which followed this suggestion this two
-% macros now remove a trailing |00| if present.
-% However, this can be a problem when they are used inside an argument of
-% another macro. One solution for this is to redefine them without the |00|
-% removal part:\\
+% suggested to add it manually if needed: |\svnfiletimezone00| or
+% |\svntimezone00|. In order not to ``break'' documents which followed this
+% suggestion this two macros now remove a trailing |00| if present. However,
+% this can be a problem when they are used inside an argument of another macro.
+% One solution for this is to redefine them without the |00| removal part:\\
% \begingroup\small
% |\renewcommand{\svntimezone}{\svntimezonehour\svntimezoneminute}|\\
% |\renewcommand{\svnfiletimezone}{\svnfiletimezonehour\svnfiletimezoneminute}|
@@ -404,77 +870,454 @@
% \endgroup
% \vspace{1ex}
%
-% \DescribeMacro{\svnpdfdate}
+% \DescribeMacro{svntime}{}
+% \DescribeMacro*{svnfiletime}{}
+% \DescribeMacro*{svncgtime}{}
+% This macros return the time part of the date only and simply return the
+% corresponding hour, minute and second macros with a colon as separator.
+%
+% \DescribeMacro{svnpdfdate}{}
% Returns the last changed date of the whole document in a format needed for
% |\pdfinfo|. Can be used like this:\\
% \hbox{}\hfill|\pdfinfo{ /CreationDate (D:\svnpdfdate) }|\hfill\hbox{}\\
-% to set the PDF creation date to
-% the last changed date if you use |pdflatex| to compile your \LaTeX{} document.
+% to set the PDF creation date to the last changed date if you use |pdflatex| to
+% compile your \LaTeX{} document.
+%
+% \DescribeMacro{svntoday}{}
+% \DescribeMacro*{svnfiletoday}{}
+% \DescribeMacro*{svncgtoday}{}
+% These macros typeset the document-global, current-file or current-group date,
+% respectively, using the format of |\today| which depends on the used language.
+% To adjust the language of your document use the \pkg{babel} package.
%
-% \subsection{Using full author names}
+% \subsection{Using Full Author Names}
% If you like to have the full author\footnote{This means subversion authors,
-% \eg the persons who commit changes into the svn repository.}
-% names, not only the usernames, in your
-% document you can use the following macros. First you have to register all
-% authors of the document with \cs{svnRegisterAuthor} and then you can write
-% \eg |\svnFullAuthor{\svnauthor}| or |\svnFullAuthor{\svnfileauthor}|.
-%
-% \DescribeMacro{\svnRegisterAuthor}
-% The usage is \cs{svnRegisterAuthor}\marg{username}\marg{full name} which
-% registers \meta{full name} as full name for \meta{username}.
-%
-% \DescribeMacro{\svnFullAuthor}
-% \DescribeMacro{\svnFullAuthor*}
-% Takes the username as argument and returns the full name if it was
-% registered first with \cs{svnRegisterAuthor}, otherwise it returns the given
-% username. The star version returns the username in parentheses after the
-% full name.
-%
-% \subsection{Using full revision names}
+% \eg the persons who commit changes into the svn repository.} names, not only
+% the usernames, in your document you can use the following macros. First you
+% have to register all authors of the document with \cs{svnRegisterAuthor} and
+% then you can write \eg |\svnFullAuthor{\svnauthor}| or
+% |\svnFullAuthor{\svnfileauthor}|.
+%
+% \DescribeMacro{svnRegisterAuthor}{\marg{author}\marg{full name}}
+% This macro registers \meta{full name} as full name for \meta{author} (a
+% subversion username) for later use with \cs{svnFullAuthor}.
+%
+% \DescribeMacro{svnFullAuthor}{\marg{author name or macro}}
+% \DescribeMacro*{svnFullAuthor*}{\marg{author name or macro}}
+% Takes the username as argument and returns the full name if it was registered
+% first with \cs{svnRegisterAuthor}, otherwise it returns the given username.
+% The star version returns the username in parentheses after the full name.
+% This is normally used in one of the following forms:\\
+% \hspace*{3em}\cs{svnFullAuthor}|{|\cs{svnauthor}|}|\\
+% \hspace*{3em}\cs{svnFullAuthor}|{|\cs{svnfileauthor}|}|\\
+% \hspace*{3em}\cs{svnFullAuthor}|{|\cs{svncgauthor}|}|
+%
+% \subsection{Using Full Revision Names}
% Like the author's also revision names/tags can be registered and used later.
-% This macros were implemented on user request and have the drawback
-% that you have to guess the next revision number of your document in order
-% to get correct results when you like to tag the to-be-checked-in revision.
-% Please note that this has nothing to do with the normal subversion tagging.
-%
-% \DescribeMacro{\svnRegisterRevision}
-% The usage is \cs{svnRegisterRevision}\marg{revision number}\marg{tag name}
-% which registers \meta{tag name} as tag name for \meta{revision number}.
-%
-% \DescribeMacro{\svnFullRevision}
-% \DescribeMacro{\svnFullRevision*}
-% Takes a \marg{revision number} (\ie |\svnrev|, |\svnfilerev| or a number)
-% as argument and returns the full name if it was registered first with
-% \cs{svnRegisterRevision}, otherwise it returns ``Revision \meta{revision
-% number}''.
-% The star version returns also the revision number leaded by `r' in parentheses
-% after the tag name, \eg |Name (r123)|.
-%
-% \subsection{Verbatim URLs with and without hyperlinks}
-% \DescribeMacro{\svnnolinkurl}
-% This macro allows you to write |\svnnolinkurl{\svnkw{HeadURL}}| and get
-% the Head URL typeset verbatim. However |\url{\svnkw{HeadURL}}| (|hyperref|
-% package) gives you the same result with hyperlinked. Both macros require
-% the |hyperref| package which is not automatically loaded by |svn-multi|.
-% Please load it manually when you like to use \cs{svnnolinkurl}.
-%
-% Since v1.3 all keywords are read and typeset verbatim so this macro isn't
-% this important anymore. However together with |hyperref|s |\urlstyle| macro
-% it can be used to have keyword values with special characters in roman font,
-% which normaly doesn't hold letters like `\_'.
-%
-% Please note that you can't use |hyperref|s |\nolinkurl| because it won't
+% These macros were implemented on user request and have the drawback that you
+% have to guess the next revision number of your document in order to get
+% correct results when you like to tag the to-be-checked-in revision. Please
+% note that this has nothing to do with the normal subversion tagging.
+%
+% \DescribeMacro{svnRegisterRevision}{\marg{revision number}\marg{tag name}}
+% This registers \meta{tag name} as tag name for \meta{revision number} for
+% later use with \cs{svnFullRevision}.
+%
+% \DescribeMacro{svnFullRevision}{\marg{revision number or macro}}
+% \DescribeMacro*{svnFullRevision*}{\marg{revision number or macro}}
+% Takes a revision number coming from a macro like \cs{svnrev}, \cs{svnfilerev}
+% or a number as argument and returns the full name if it was registered first
+% with \cs{svnRegisterRevision}, otherwise it returns ``Revision \meta{revision
+% number}''. The star version returns also the revision number leaded by `r' in
+% parentheses after the tag name, \eg |Name (r123)|.
+%
+% \subsection{Verbatim URLs with and without Hyperlinks}
+% \vspace{-\baselineskip}
+% \DescribeMacro{svnnolinkurl}{\marg{macro with returns special text}}
+% This macro allows you to write |\svnnolinkurl{\svnkw{HeadURL}}| and get the
+% Head URL typeset verbatim. However |\url{|\cs{svnkw}|{HeadURL}}|
+% (\pkg{hyperref} package) gives you the same result with a hyperlink. Both
+% macros require the \pkg{hyperref} package which is not automatically loaded by
+% \svnmulti. Please load it manually when you like to use \cs{svnnolinkurl}.
+%
+% Since v1.3 all keywords are read and typeset verbatim so this macro isn't this
+% important anymore. However together with \pkg{hyperref}'s |\urlstyle| macro it
+% can be used to have keyword values with special characters in roman font,
+% which normally doesn't hold letters like `|_|'.
+%
+% Please note that you can't use \pkg{hyperref}'s |\nolinkurl| because it won't
% expand \cs{svnkw}.
%
+%
+% \subsection{Table of Revisions}\label{sec:table}
+% Version 2.0 introduces this new feature which allows a overview table to be
+% typeset which holds the version control information of all files of the
+% document.
+%
+% \DescribeMacro{tableofrevisions}{}
+% If the \op{table} is enabled a table of revision is written into a file called
+% \meta{main \LaTeX\ file}|.svt| (|t| for table) which can be included using the
+% \cs{tableofrevisions} macro. The table contains the revision information of
+% the complete document and of all defined groups.
+% If the \op{subgroups} option is set the table will also include the single
+% files sorted by group.\par
+%
+% \subsubsection*{Table Format Macros}
+% The |.svt| file is in an general format which uses a lot of macros to format
+% the table and the different cells. This macros should not be used by the user
+% directly but rather can be redefined to fit the personal taste.
+% Figure~\ref{fig:tablemacros} shows this macros in their position inside the
+% table of revisions.
+%
+% \par\noindent
+% \begin{figure}
+% \makebox[1.175\textwidth][r]{%
+% \framebox{\scalebox{0.675}{%
+% \begin{tabular}{ll@{\ \ \ }l@{\ \ \ }l@{\ \ \ }ll}
+% &\multicolumn{4}{l}{\texttt{\textbackslash chapterORsection*\{\cs{svnrevisionsname}\}}}\\
+% \\
+% &\multicolumn{4}{l}{\cs{svnbeforetable}}\\
+% & \cs{svntable} (like \cs{begin}\texttt{\{svntable\}})\\
+% \\
+% \cmidrule{2-5}
+% &\cs{svntablehead}\\
+% \cmidrule{2-5}
+% \cs{svnglobalrow} & \cs{svntabglobal} &&&&\cs{endsvnglobalrow} \\
+% \cs{svngrouprow} & \cs{svntabgroup} \marg{group} &&&&\cs{endsvngrouprow}\\
+% \cs{svnsubgrouprow} & \cs{svntabsubgroup} \marg{level}\marg{name} &&&&\cs{endsvnsubgrouprow}\\
+% \cs{svnfilerow} & \cs{svntabfile} \marg{level}\marg{name} &
+% \raisebox{3.3ex}[-3.3ex]{%
+% \cs{svntabrev}\marg{rev}
+% }&
+% \raisebox{3.3ex}[-3.3ex]{%
+% \cs{svntabauthor}\marg{username}
+% }&
+% \raisebox{4ex}[-4ex]{\parbox{13.5em}{\raggedright
+% \cs{svntabdate}\newline\marg{year}\marg{month}\marg{day}\newline
+% \marg{hour}\marg{minute}\marg{second}\newline\marg{TZ~hour}\marg{TZ~minute}
+% }}
+% &\cs{endsvnfilerow}\\[\smallskipamount]
+% &\cs{svntablefoot} \\
+% \cmidrule{2-5}
+% \\
+% &\cs{endsvntable} (like \cs{end}\texttt{\{svntable\}})\\
+% &\multicolumn{4}{l}{\cs{svnaftertable}}\\
+% \end{tabular}
+% }}}
+% \caption{Table formatting macros and their position.}\label{fig:tablemacros}
+% \end{figure}
+%
+% \DescribeMacro{svnrevisionsname}{}
+% Holds the name of the table of revisions which is printed above it. The
+% default is ``Table of Revisions'' which can be changed \eg to another
+% language.
+%
+% \DescribeMacro{svnbeforetable}{}
+% Can hold some content to be placed between the headline and the table.
+%
+% \DescribeMacro{svnaftertable}{}
+% Can hold some content to be placed after the table. By default it holds a
+% macro to force a new page.
+%
+% \DescribeMacro{svntable}{}
+% \DescribeMacro*{endsvntable}{}
+% This macros build the table environment and hold a |\begin{tabular}{llll}|
+% |\end{tabular}| group by default. They can be redefined using\\
+% \hspace*{3em}|\renewcommand{svntable}{...}{...}|.\\ In order to support
+% special table packages like \pkg{tabularx} or \pkg{longtable} the
+% \emph{content} of this macro is written verbatim into the |.svt| file. All
+% other table macros are written as string and will be expanded when the |.svt|
+% is read back.
+%
+% \DescribeMacro{svntablehead}{}
+% Holds the table head row ``Name |&| Rev |&| Author |&| Date |\\\hline|''.
+%
+% \DescribeMacro{svntablefoot}{}
+% Can hold the table foot row but is empty by default.
+%
+% \noindent
+% \begin{tabular}{@{}l@{\hspace{-2\macrosep}}l@{}}\\
+% \DescribeMacro*{svnglobalrow}{} & \DescribeMacro*{endsvnglobalrow}{} \\
+% \DescribeMacro*{svngrouprow}{} & \DescribeMacro*{endsvngrouprow}{} \\
+% \DescribeMacro*{svnsubgrouprow}{} & \DescribeMacro*{endsvnsubgrouprow}{} \\
+% \DescribeMacro*{svnfilerow}{} & \DescribeMacro*{endsvnfilerow}{} \\
+% \end{tabular}
+% \\*[\medskipamount]
+% This macros are placed at the begin and end of every corresponding row and are
+% empty be default. They can be used to insert horizontal lines before or after
+% certain row types.
+%
+% \DescribeMacro{svntabglobal}{}
+% Simply typesets the name for the row holding the information of the whole
+% document, \eg ``Document''.
+%
+% \DescribeMacro{svntabgroup}{\marg{group name}}
+% Formats the group name.
+%
+% \DescribeMacro{svntabsubgroup}{\marg{nesting level
+% (1,2,3,\ldots)}\marg{subgroup name}}
+% Formats a subgroup name. The name is derived from a file name and therefore
+% could contain characters like `|_|' which should be taken into account. The
+% macro \cs{svnnolinkurl} can be used for this. Because subgroups can be nested
+% a number is provided to tell the nesting depth. This can be used to produce
+% different indents for different levels: \eg:
+% |\addtolength{\leftskip}{#1\someindentamount}|.
+%
+% \DescribeMacro{svntabfile}{\marg{nesting level
+% (1,2,3,\ldots)}\marg{file path/name}}
+% Same as for the subgroup above but for file names.
+%
+% \DescribeMacro{svntabrev}{\marg{revision number}}
+% Allows the formatting of the revision number. If empty the number will be
+% typeset as normal. Conditional formatting is possible using the \pkg{ifthen}
+% package: \eg the highest revision should be bold:
+% \begin{verbatim}
+% \renewcommand*{\svntabrev}[1]{\ifthenelse{#1=\svnrev}{\textbf{#1}}{#1}}
+% \end{verbatim}
+% \vspace{-1\baselineskip}
+% \DescribeMacro{svntabauthor}{\marg{author username}}
+% Formats the user names in the table. The macro \cs{svnFullAuthor} is a good
+% candidate to be used here.
+%
+% \DescribeMacro{svntabdate}{\ignorespaces
+% \marg{year}\marg{month}\marg{day}\ignorespaces
+% \marg{hour}\marg{minute}\marg{second}\ignorespaces
+% \marg{TZ~hour}\marg{TZ~minute}}
+% Allows the formatting of the date. All values are given as numbers. The year
+% has four digits and the timezone hour has a |+| or |-| sign, but all other
+% values have only two digits.
+%
+% \subsection{Including Keywords of External Files}\label{sec:external}
+% Version 2.0 now supports the inclusion of keywords of external files using the
+% following macros and the Perl script \scr{svn-multi.pl}.
+%
+% \DescribeMacro{svnexternal}{\oarg{group name}\{\{\meta{filea}\}\ignorespaces
+% \{\meta{fileb}\}\ldots\{\meta{filex}\}\}}
+% Subversion keywords of external files (\eg non-\LaTeX\ files like images or
+% even directories) can be included using this macro which awaits a list of
+% files, each with the full path relative to the main \LaTeX\ file and each
+% enclosed by |{ }|. The files must be under version control by Subversion, of
+% course. Use \cs{svnexternalpath} to specify paths to be scanned for this
+% files if they are not located relative to the main file. The requested
+% filenames are written into the |.svn| auxiliary file and then processed by the
+% external script \scr{svn-multi.pl} which must be executed like described
+% below. The appropriate keywords are then written in \meta{source file}|.svx|
+% files (|x| like eXternal) which are read in by the same \cs{svnexternal} macro
+% at the next \LaTeX\ run. If a group name of `|*|' for the external files is
+% specified using the optional argument the keywords will be placed in the same
+% keyword group as this macro. The file local macros like \cs{svnfilerev} which
+% appear in a source file after \cs{svnexternal} are affected, \ie updated if
+% one of the external revision is higher than the one of the source file. This
+% makes sense if \eg the included graphics are taken as logical part of a source
+% file.
+%
+% \DescribeMacro{svnexternalpath}{\{\{\meta{patha}\}\ignorespaces
+% \{\meta{pathb}\}\ldots\{\meta{pathx}\}\}}
+% This macro can be used in the document preamble to declare a set of paths to
+% be scanned for files specified with \cs{svnexternal}. This avoids the need to
+% provide the path again and again for every file.
+% The paths need to be enclosed in |{ }| and must be in Unix style, \ie with
+% `|/|' as directory separator and should end with a `|/|'. Windows users should
+% just replace all `|\|' with `|/|', \eg `|C:\My dir|' gets `|{C:/My dir/}|'.
+%
+% \subsection*{Script \hypertarget{script@svn-multi.pl}{\texttt{svn-multi.pl}}}
+% The file \scr{svn-multi.pl} which comes with the \svnmulti package is an
+% external Perl script which has to be run in the command line or by a \LaTeX\
+% development environment/editor like other tools like |Bib|\TeX\ or
+% |Makeindex|. A Perl interpreter and a Subversion command line client (|svn|)
+% must be installed to execute this script. Both are available for free for all
+% major operating systems.\par
+% The script should be run inside the document folder in the following order:
+% \begin{enumerate}
+% \item Compile \LaTeX\ document, |.svn| file is generated.
+% \item Run \scr{svn-multi.pl} script, |.svx| files are generated.
+% \item Compile \LaTeX\ document, |.svx| files are read in.
+% \end{enumerate}
+%
+% The script can be used with three different sets of arguments and with
+% any combination of them. Please note that the word |jobname| stands for
+% the main \LaTeX\ file name without the |.tex| extension.
+%
+% \DescribeScript{svn-multi.pl}{\meta{jobname}}
+% As already mentioned in the \cs{svnexternal} description above this script
+% reads the requested external filename from the \meta{jobname}|.svn| file. The
+% Subversion command line client |svn| is then used to fetch the needed keywords
+% which are placed in a \cs{svnidlong} macro inside a \meta{source file}|.svx|
+% file. Every single source file which uses \cs{svnexternal} will become its own
+% |.svx| file which allows to attach specific external files to one (or more)
+% specific source files.
+%
+% \DescribeScript{svn-multi.pl}{\meta{jobname} [-{}-group \meta{group name}]
+% \meta{file(s)} \ldots}
+% The second way to use \scr{svn-multi.pl} is to call it with a list of external
+% files. A keyword group can be specified using the |--group| \meta{group name}
+% option which can placed any number of times between the file names. The group
+% is used for all external files listed after the option until the next group is
+% specified. All keywords of these files are written in the \meta{jobname}|.svx|
+% file and read in by the main \LaTeX\ file if a, possible empty,
+% \cs{svnexternal} macro is included. This allows for easy including of many
+% external files without specifying them all inside the source file. For example
+% \scr{svn-multi.pl}| */*.jpg| (under Linux/Unix) will include the keywords of
+% all JPG files in all subdirectories.\par
+% It is also possible to do this with a sub-(\LaTeX)-file by calling the script
+% on it: \scr{svn-multi.pl}~\mbox{\meta{sub file} \meta{external files for sub
+% file}}, which will create/overwrite the \meta{sub file}|.svx| file. However
+% the files given by \cs{svnexternal} in this sub-file will not be honoured in
+% this case.
+%
+% \DescribeScript{svn-multi.pl}{\meta{jobname} [-{}-group \meta{group name}]
+% -{}-fls}
+% Instead of providing a list of all non-\LaTeX/external files the |--fls|
+% option can be used to read this list from the \meta{jobname}|.fls| file. This
+% file is produced by the \LaTeX\ compiler when run with the |--recorder| option
+% and contains a list of all input and output files. Only input files with a
+% relative path are used. A corresponding keyword group can also be specified.
+%
+% \section{Compile Guide}\label{sec:compileguide}
+% A document which uses \svnmulti\ needs to be compiled by \LaTeX\ in the
+% following ways depending on the used features.
+% ^^A The Figure~\ref{fig:compi} below shows the complete compilation cycle.
+%
+% \subsection*{Basic Features -- Global and Group Keywords}
+% \begin{enumerate}
+% \item Compile document with \LaTeX. The |.svn| file is generated. Document
+% global and group keyword macros are not valid yet.
+% \item Compile document again with \LaTeX. The |.svn| file is read by
+% \svnmulti. Document global and group keyword macros are now valid.
+% \end{enumerate}
+%
+% \subsection*{Table of Revisions}
+% \begin{enumerate}
+% \item Compile document with \LaTeX. Document global and group keyword macros
+% are calculated and written to the |.svt| file.
+% \item Compile document again with \LaTeX. The |.svt| file is read and
+% typeset by the \cs{tableofrevisions} macro.
+% \end{enumerate}
+%
+% \subsection*{External Files}
+% \begin{enumerate}
+% \item Compile document with \LaTeX. The |.svn| file is generated with
+% references to the external files. Document global and group keyword macros
+% are not valid yet. External files are not taken into account.
+% \item Run \scr{svn-multi.pl} with the main base name (main file name without
+% extension) as argument. This generates |.svx| files for each |.tex| file
+% which used \cs{svnexternal}. This files contain the keywords of the
+% external files.
+% \item Compile document again with \LaTeX. The |.svx| files are read by
+% \svnmulti and the |.svn| file is updated to take the new keywords into
+% account. Document global and group keywords macros only hold
+% internal values.
+% \item Compile document again with \LaTeX. The |.svn| file is read by
+% \svnmulti. Document global and group keyword macros are now fully valid.
+% \end{enumerate}
+%
+% \iffalse
+% \begin{figure}
+% \centerline{\includegraphics[width=.8\textwidth]{images/compilation.pdf}}
+% \caption{Compilation cycle of documents which use \svnmulti}\label{fig:compi}
+% \end{figure}
+% \fi
+%
+% \section{Known Issues}\label{sec:issues}
+% This section lists some known issues of the \svnmulti package and tries to
+% provide some workaround. Please feel free to write \svnmulti author if you
+% detect any side effects or other issues causes by this package.
+%
+% \subsection{Packet \texttt{listings} uses \cs{input}}
+% If a file \meta{basename}.\meta{extension} is typeset verbatim using
+% |\lstinputlisting|, which uses |\input| to read the file, an existing
+% \meta{basename}|.svx| file is also included as part of the listing. This can
+% be avoided by code like this:
+% \begin{verbatim}
+% {\makeatletter\let\input\@input
+% \lstinputlisting[options]{filename}
+% }
+% \end{verbatim}
+%
+% \section{Package Dependencies and Acknowledgements}\label{sec:depack}
+% This package uses some features from other packages and/or patches some macros
+% of them to provide additional related features. This section is used to list
+% this packages, their internal macro which got used and acknowledge the
+% authors/maintainers of them. Please send error reports to the author of
+% \svnmulti and not to the people listed below.\par
+% All packages (including \svnmulti) stand under the \LaTeX\ Project Public
+% Licence (LPPL) which can be found at
+% \hbox{\url{http://www.latex-project.org/lppl/}} and can be freely downloaded
+% from the Comprehensive TeX Archive Network (CTAN) at
+% \hbox{\url{http://www.ctan.org/}}.
+%
+% \newenvironment*{DepPackage}[1]{\ignorespaces
+% \subsection*{\pkg{#1}}%
+% \def\thedeppackage{#1}%
+% \def\infoline##1{\par\smallskip\textbf{##1}\hspace{1em}}%
+% }
+% {\infoline{Location:} CTAN: \url%
+% {http://tug.ctan.org/pkg/\thedeppackage}}
+%
+% \begin{DepPackage}{hyperref}
+% The macro \cs{svnnolinkurl} is resembling the \pkg{hyperref} macro
+% |\nolinkurl| and uses some its internal macros from the |\url| macro
+% definition.
+% \infoline{Used internal macros:} |\hyper@normalise|, |\Hurl|
+% \infoline{Version used:} 2008/11/18 v6.78m
+% \infoline{Licence:} LPPL, any version
+% \infoline{Authors/Maintainers:} Sebastian Rahtz, Heiko Oberdiek
+% \end{DepPackage}
+%
+% \begin{DepPackage}{fink}
+% The FiNK (File Name Keeper) package is used to get the file name and path of
+% the input files. Two macros are patched to install hooks to execute own macros
+% before and after each input file. This is only done if needed for an enabled
+% option and therefore can be disabled using the option \op{old}.
+% \infoline{Used internal macros:} |\fink@file|, |\fink@nextdir|,
+% |\fink@nextext|, |\fink@nextbase|
+% \infoline{Patched internal macros:} |\fink@prepare|, |\fink@restore|
+% \infoline{Version used:} 2008/02/27 v2.1.1
+% \infoline{Licence:} LPPL, any version
+% \infoline{Author/Maintainer:} Didier Verna
+% \end{DepPackage}
+%
+% \begin{DepPackage}{graphics}
+% If the \op{graphics} option is enabled the following macro is patched to
+% record the file name and path of the included graphic.
+% \infoline{Patched internal macros:} |\Gin@setfile|
+% \infoline{Version used:} 2006/02/20 v1.0o
+% \infoline{Licence:} LPPL, any version
+% \infoline{Author/Maintainer:} David Carlisle, \LaTeX3 Project
+% \end{DepPackage}
+%
+% \begin{DepPackage}{pgf}
+% Like the \pkg{graphics} package above a macro of this package is pathed to
+% record the file names and paths of included images when the option
+% \op{pgfimages} is enabled. Because this images pre-declares images for later
+% use the internal declared `image macros' are patched as well.
+% \infoline{Patched internal macros:} |\pgf@declareimage|,
+% \hbox{|\pgf@image@|\meta{image name}|!|}
+% \infoline{Used internal macros:} |\pgf@filename|, |\pgf@image|
+% \infoline{Version used:} 2008/01/15 v2.00
+% \infoline{Licence:} LPPL v1.3c and GPL v2
+% \infoline{Author\&Maintainer:} Till Tantau
+% \end{DepPackage}
+%
+% \begin{DepPackage}{latex}
+% Parts of the macro definitions of the |\tableofcontents| macros from the
+% |article| and |book| class of standard \LaTeX\ were used to define a similar
+% \csi{tableofrevisions} macro for both this classes and other similar classes.
+% \infoline{Version used:} 2005/09/16 v1.4f
+% \infoline{Licence:} LPPL v1.3c
+% \infoline{Authors/Maintainers:} \LaTeX3 Project
+% \end{DepPackage}
+%
+%
% \section{Further Reading}
-% The \textsf{svn-multi} package and its usage got discussed in the following
-% articles:
+% The \textsf{svn-multi} package (in version 1.3) and its usage got discussed in
+% the following articles:
%
% \begin{itemize}
% \item[{[1]}] Martin Scharrer, ``Version Control of LaTeX Documents with
% svn-multi'', The Prac\TeX\ Journal, (3), 2007.
% URL: \url{http://www.tug.org/pracjourn/2007-3/scharrer/}
-% \item[{[2]}] Mark Eli Kalderon, ``LaTeX and Subversion'',
+% \item[{[2]}] Mark Eli Kalderon, ``LaTeX and Subversion'',
% The Prac\TeX\ Journal, (3), 2007.
% URL: \url{http://www.tug.org/pracjourn/2007-3/kalderon-svnmulti/}
% \item[{[3]}] Uwe Ziegenhagen , ``LaTeX Document Management with Subversion'',
@@ -485,99 +1328,385 @@
% \StopEventually{}
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \section{Implementation}
-
-% \begin{macro}{\svn}
-% \begin{macro}{\svn*}
-% After *-testing, the intermediate macros |\svn@s| and |\svn@n| are called to
-% strip the |{ }| from |\svn|[|*|]|{$...$}| and to remove the |*|. Then the
-% actual macros are called to strip the dollars with or without the space
-% before the last dollar.
-% \changes{v1.2}{2007/06/22}{Added star version. Normal version was not
-% changed to not break existing documents with user defined keywords without
-% leading space.}
+% \subsection{Package Header}
+% \subsubsection*{Package Identification}
% \begin{macrocode}
-\newcommand{\svn}{\@ifnextchar{*}{\svn@s}{\svn@n}}
-\def\svn@n#1{\@svn@n#1}
-\def\svn@s*#1{\@svn@s#1}
-\def\@svn@n$#1${#1}
-\def\@svn@s$#1 ${#1}
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{svn-multi}
+ [\filedate\space\fileversion\space SVN Keywords for multi-file LaTeX documents]
+% \end{macrocode}
+
+% \subsubsection*{Options}
+% Declaration of options and internal switches.
+% \begin{macrocode}
+\RequirePackage{kvoptions}
+
+\SetupKeyvalOptions{%
+ family = svn-multi,
+ prefix = @svnmulti@
+}
+\newif\if@svnmulti@anygraphic
+\newif\if@svnmulti@autoload
+
+\DeclareVoidOption{old}{%
+ \@svnmulti@verbatimtrue
+ \@svnmulti@groupsfalse
+ \@svnmulti@externalfalse
+ \@svnmulti@graphicsfalse
+ \@svnmulti@pgfimagesfalse
+ \@svnmulti@autoloadfalse
+ \@svnmulti@tablefalse
+ \@svnmulti@filehooksfalse
+ \@svnmulti@subgroupsfalse
+}
+\DeclareVoidOption{all}{%
+ \@svnmulti@verbatimtrue
+ \@svnmulti@groupstrue
+ \@svnmulti@externaltrue
+ \@svnmulti@graphicstrue
+ \@svnmulti@pgfimagestrue
+ \@svnmulti@autoloadtrue
+ \@svnmulti@tabletrue
+ \@svnmulti@filehookstrue
+ \@svnmulti@subgroupstrue
+}
+\DeclareBoolOption[true]{verbatim}
+\DeclareBoolOption[false]{groups}
+\DeclareBoolOption[false]{external}
+\DeclareBoolOption[false]{subgroups}
+\DeclareBoolOption[false]{graphics}
+\DeclareBoolOption[false]{pgfimages}
+\DeclareStringOption{autoload}[true]
+\DeclareBoolOption[false]{table}
+\DeclareBoolOption[false]{filehooks}
+
+\ExecuteOptions{old}
+\ProcessKeyvalOptions{svn-multi}
+% \end{macrocode}
+%
+% Enable dependent options:
+% \begin{macrocode}
+\def\svn@depoption#1{%
+ \csname if@svnmulti@#1\endcsname\else
+ \message{svn-multi: Required option '#1' enabled.}%
+ \csname @svnmulti@#1true\endcsname
+ \fi
+}
+
+\if@svnmulti@groups
+ \svn@depoption{filehooks}
+\fi
+\if@svnmulti@external
+ \svn@depoption{filehooks}
+\fi
+\if@svnmulti@subgroups
+ \svn@depoption{groups}
+ \svn@depoption{filehooks}
+\fi
+\if@svnmulti@graphics
+ \svn@depoption{external}
+ \svn@depoption{autoload}
+ \svn@depoption{filehooks}
+\fi
+\if@svnmulti@pgfimages
+ \svn@depoption{external}
+ \svn@depoption{autoload}
+ \svn@depoption{filehooks}
+\fi
+\if@svnmulti@autoload
+ \svn@depoption{external}
+ \svn@depoption{filehooks}
+\fi
+\if@svnmulti@table
+ \svn@depoption{groups}
+ \svn@depoption{filehooks}
+\fi
+% \end{macrocode}
+%
+% Check if \op{autoload} was set explicitly and obey the value.
+% \begin{macrocode}
+\ifx\@svnmulti@autoload\@undefined
+\else
+\ifx\@svnmulti@autoload\empty
+\else
+\def\svn@temp{true}
+\ifx\@svnmulti@autoload\svn@temp
+ \@svnmulti@autoloadtrue
+ \svn@depoption{external}
+ \svn@depoption{filehooks}
+\else
+\def\svn@temp{false}
+\ifx\@svnmulti@autoload\svn@temp
+ \if@svnmulti@autoload
+ \PackageWarning{svn-multi}{Option 'autoload' disabled.}
+ \fi
+ \@svnmulti@autoloadfalse
+\else
+ \PackageError{svn-multi}%
+ {Invalid value for 'autoload' option: '\@svnmulti@autoload'^^J%
+ ! Only 'true','false' or empty (='true') are allowed!}
+\fi\fi\fi\fi
+% \end{macrocode}
+
+% General switch if any graphic option is enabled:
+% \begin{macrocode}
+\if@svnmulti@graphics
+ \@svnmulti@anygraphictrue
+\fi
+\if@svnmulti@pgfimages
+ \@svnmulti@anygraphictrue
+\fi
+% \end{macrocode}
+%
+
+% \subsection{General Internal Macros}
+% Some internal used macro which don't fit in any other section.
+%
+% \begin{macro}{\svn@ifempty}[1]{string}
+% Tests if the given argument is empty. If so the first of the next two token
+% will be expanded, the second one otherwise.
+% \begin{macrocode}
+\def\svn@ifempty#1{%
+ \begingroup
+ \edef\svn@temp{#1}%
+ \ifx\svn@temp\empty
+ \endgroup
+ \expandafter
+ \@firstoftwo
+ \else
+ \endgroup
+ \expandafter
+ \@secondoftwo
+ \fi
+}
% \end{macrocode}
% \end{macro}
+
+% \begin{macro}{\svn@ifequal}[2]{string a}{string b}
+% Tests if the given arguments are identical, \eg same strings. If so the first
+% of the next two token will be expanded, the second one otherwise.
+% \begin{macrocode}
+\def\svn@ifequal#1#2{%
+ \begingroup
+ \edef\svn@stringa{#1}%
+ \edef\svn@stringb{#2}%
+ \ifx\svn@stringa\svn@stringb
+ \endgroup
+ \expandafter
+ \@firstoftwo
+ \else
+ \endgroup
+ \expandafter
+ \@secondoftwo
+ \fi
+}
+% \end{macrocode}
% \end{macro}
+% \begin{macro}{\svn@ifvalidrev}[1]{macro name}
+% Checks if the given macro (by name) is a valid revision, \ie defined and
+% greater than zero.
+% \begin{macrocode}
+\def\svn@ifvalidrev#1{%
+ \begingroup
+ \@ifundefined{#1}%
+ {\def\svn@temp{-1}}%
+ {\expandafter\edef
+ \expandafter\svn@temp\expandafter{\csname #1\endcsname}}%
+ \ifnum\svn@temp>-1\relax
+ \endgroup
+ \expandafter
+ \@firstoftwo
+ \else
+ \endgroup
+ \expandafter
+ \@secondoftwo
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\svn@input}[1]{file name/path}
+% Macro to load |.svx| and |.svt| files. The current keyword group is saved
+% away and restored after the |.svx| file is loaded. The macros |\IfFileExists|
+% with |\@@input| are used because |\InputIfFileExists| got redefined by the
+% \pkg{fink} package and there is no need to use \pkg{fink} for this files.
+% \begin{macrocode}
+\def\svn@input#1{%
+ \begingroup
+ \let\svn@rg\svn@g
+ \IfFileExists{#1}{\@@input #1\relax}{}%
+ \global\let\svn@g\svn@rg
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\svn@inputsvx}[1]{file name/path without extension}
+% Used to save and restore file keywords when reading |.svx| files.
+% \begin{macrocode}
+\def\svn@inputsvx#1{%
+ \svn@pushfilestack
+ \svn@input{#1.svx}%
+ \svn@popfilestack
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@namexdef}[1]{macro name}
+% Provides an expanding and global version of |\@namedef|.
+% \begin{macrocode}
+\providecommand\@namexdef[1]{%
+ \expandafter\xdef\csname #1\endcsname
+}
+% \end{macrocode}
+% \end{macro}
+%
+
% \subsection{Definition of init values}
+% Initialisation of at least the revision to a numeric value is necessary to not
+% break the |\ifnum| tests later in this package. The revision is initialised to
+% -1, but will be set to 0 if an unexpanded |$||Rev:$| keyword is read. This way
+% it can be tested if a file had any keyword macros or not.\par
+% Note that there a two different macros for the document global keywords:\par
+% The user level |\svn|\meta{kw} macros hold the global value and are only valid
+% after a \LaTeX\ run. They are initialised here and defined in the |.svn|
+% file which is read at the end of the package if it exists and written at the
+% end of the document.\par
+% The internal macros |\@svn@|\meta{kw} store the oldest (i.e. highest revision)
+% keywords read so far from the \cs{svnid} and \cs{svnidlong} macros. They
+% change during the document and are used to produce the values of the
+% |\svn|\meta{kw} macros when the |.svn| file is written.\par
+% Group wide macros are initialised when the group is first defined and have
+% three different macros: |\svng@|\meta{group}|@|\meta{kw} (defined in |.svn|),
+% |\@svng@|\meta{group}|@|\meta{kw} (accumulator) and also an access
+% macro |\svncg|\meta{group} which uses
+% |\svn@g|\meta{current group}|@|\meta{kw}.
% \begin{macrocode}
% Init values
-\def\svnrev{0} \def\svnfilerev{0} \def\@svn@rev{0}
-\def\svndate{} \def\svnfiledate{} \def\@svn@date{}
-\def\svnauthor{} \def\svnfileauthor{} \def\@svn@author{}
-\def\svnyear{0} \def\svnfileyear{0} \def\@svn@year{0}
-\def\svnmonth{0} \def\svnfilemonth{0} \def\@svn@month{0}
-\def\svnday{0} \def\svnfileday{0} \def\@svn@day{0}
-\def\svnhour{0} \def\svnfilehour{0} \def\@svn@hour{0}
-\def\svnminute{0} \def\svnfileminute{0} \def\@svn@minute{0}
-\def\svnsecond{0} \def\svnfilesecond{0} \def\@svn@second{0}
-\def\svntimezonehour{+00} \def\svnfiletimezonehour{+00} \def\@svn@timezonehour{+00}
-\def\svntimezoneminute{00} \def\svnfiletimezoneminute{00} \def\@svn@timezoneminute{00}
-\def\svnmainurl{NOT SET}\def\svnmainfilename{NOT SET}
+\def\svnrev{-1} \def\@svn@rev{-1}
+\def\svndate{} \def\@svn@date{}
+\def\svnauthor{} \def\@svn@author{}
+\def\svnyear{0000} \def\@svn@year{0000}
+\def\svnmonth{00} \def\@svn@month{00}
+\def\svnday{00} \def\@svn@day{00}
+\def\svnhour{00} \def\@svn@hour{00}
+\def\svnminute{00} \def\@svn@minute{00}
+\def\svnsecond{00} \def\@svn@second{00}
+\def\svntimezonehour{+00} \def\@svn@timezonehour{+00}
+\def\svntimezoneminute{00} \def\@svn@timezoneminute{00}
+\def\svnmainurl{NOT SET} \def\svnmainfilename{NOT SET}
+\def\svnurl{} \def\svnfname{}
+\def\svn@temp{}
+
+\def\svn@pg{} \def\svn@g{} \def\svn@cg{\svn@g}
+\let\@svng@@files\relax
+
+\def\svn@initfile{%
+ \gdef\svnfilerev{-1}%
+ \gdef\svnfiledate{}%
+ \gdef\svnfileauthor{}%
+ \gdef\svnfileyear{0000}%
+ \gdef\svnfilemonth{00}%
+ \gdef\svnfileday{00}%
+ \gdef\svnfilehour{00}%
+ \gdef\svnfileminute{00}%
+ \gdef\svnfilesecond{00}%
+ \gdef\svnfiletimezonehour{+00}%
+ \gdef\svnfiletimezoneminute{00}%
+ \gdef\svnfileurl{}%
+ \gdef\svnfilefname{}%
+}
+\svn@initfile
% \end{macrocode}
%
% \subsection{Timezone macros}
-% \begin{macro}{\svnfiletimezone}
% \begin{macro}{\svntimezone}
-% This macros return the global and local time zones. Since v1.4 the minute part
-% is returned as well and the macro removes manually added |00| after it to
-% support older documents.
+% \begin{macro}{\svnfiletimezone}
+% \begin{macro}{\svncgtimezone}
+% These macros return the global, file-local and current group time zones,
+% respectively. Since v1.4 the minute part is returned as well and the macro
+% removes manually added |00| after it to support older documents.
% \changes{v1.4}{2009/02/27}{Return now full timezone (hour + minute part).
% Manually added 00 minutes are removed.}
% \begin{macrocode}
\def\svntimezone{\svntimezonehour\svntimezoneminute\svn@gobblezeros}
\def\svnfiletimezone{\svnfiletimezonehour\svnfiletimezoneminute\svn@gobblezeros}
+\def\svncgtimezone{\svncgtimezonehour\svncgtimezoneminute}
% \end{macrocode}
% \end{macro}
% \end{macro}
+% \end{macro}
% \begin{macro}{\svn@gobblezeros}
% \begin{macro}{\svn@gobblezeros@}
% This two cascaded macros remove a trailing |00| and are used by
-% |\svnfiletimezone| and |\svntimezone|.
+% \cs{svnfiletimezone} and \cs{svntimezone}.
% \begin{macrocode}
\def\svn@gobblezeros{%
-\futurelet\svn@nextchar\svn@gobblezeros@
+ \futurelet\svn@nextchar\svn@gobblezeros@
}
\def\svn@gobblezeros@{%
-\let\@tempa=\relax
-\def\@tempb{0}%
-\ifx0\svn@nextchar
-\let\@tempa=\@gobbletwo
-\fi
-\@tempa
+ \let\@tempa=\relax
+ \def\@tempb{0}%
+ \ifx0\svn@nextchar
+ \let\@tempa=\@gobbletwo
+ \fi
+ \@tempa
}
% \end{macrocode}
% \end{macro}
% \end{macro}
+% \begin{macro}{\svntime}
+% \begin{macro}{\svnfiletime}
+% \begin{macro}{\svncgtime}
+% This macros simple use the hour, minute and second macros.
+% \begin{macrocode}
+\def\svntime{\svnhour:\svnminute:\svnsecond}
+\def\svnfiletime{\svnfilehour:\svnfileminute:\svnfilesecond}
+\def\svncgtime{\svncghour:\svncgminute:\svncgsecond}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
% \subsection{\textit{Today} macros}
-% This macros use the |\today| macro to typeset the current date using the local
-% language settings. Thanks and credit goes to Manuel P\'egouri\'e-Gonnard for
-% suggesting this feature and for providing the code.
+% These macros use the |\today| macro to typeset the current date using the
+% local language settings. Thanks and credit goes to Manuel P\'egouri\'e-Gonnard
+% for suggesting this feature and for providing the code.
% \begin{macro}{\svntoday}
% \begin{macrocode}
-\newcommand\svntoday{%
-\begingroup
-\year\svnyear \month\svnmonth \day\svnday
-\relax \today
-\endgroup}
+\newcommand*{\svntoday}{%
+ \begingroup
+ \year\svnyear \month\svnmonth \day\svnday
+ \relax \today
+ \endgroup
+}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\svnfiletoday}
% \begin{macrocode}
-\newcommand\svnfiletoday{%
-\begingroup
-\year\svnfileyear \month\svnfilemonth \day\svnfileday
-\relax \today
-\endgroup}
+\newcommand*{\svnfiletoday}{%
+ \begingroup
+ \year\svnfileyear \month\svnfilemonth \day\svnfileday
+ \relax \today
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\svncgtoday}
+% \begin{macrocode}
+\newcommand*{\svncgtoday}{%
+ \@ifundefined{svng@\svn@cg @year}{??}{%
+ \begingroup
+ \year\svncgyear \month\svncgmonth \day\svncgday
+ \relax \today
+ \endgroup
+ }%
+}%
% \end{macrocode}
% \end{macro}
@@ -588,117 +1717,149 @@
% parsed at the end of \cs{svnkwsave}.
% \begin{macrocode}
\newcommand*{\svnid}{%
-\@svnidswtrue
-\svnkwsave
-}
+ \@svnidswtrue
+ \svnkwsave
+}
\newif\if@svnidsw
\@svnidswfalse
% \end{macrocode}
% \end{macro}
%
-% \begin{macro}{\svn@scanId}
-% Scans svn Id (after it got parsed by \cs{svnkwsave}).
-% Awaits only Id value without leading `|Id:|' and a trailing |\relax| as end
-% marker.
-% It calls \cs{@svn@scandate} to extract the date informations and
-% \cs{@svn@updateid} to update global Id values and also sets the appropriate
-% keywords.
+% \begin{macro}{\svn@scanId}[5]{file name}{revision}{date (YYYY-MM-DD)}{time
+% (HH:MM:SSZ)}{author (username)}
+% Scans svn Id (after it got parsed by \cs{svnkwsave}). Awaits only Id value
+% without leading `|Id:|' and a trailing |\relax| as end marker. It calls
+% \cs{@svn@scandate} to extract the date information and \cs{@svn@updateid} to
+% update global Id values and also sets the appropriate keywords.
% \begin{macrocode}
\def\svn@scanId#1 #2 #3 #4 #5\relax{%
-% #1 is filename, #2 is revision, #3 is date (JJJJ-MM-DD),
-% #4 is time (HH:MM:SST), #5 is author (username)
-\@svn@scandate{#3 #4}%
-\@svn@updateid{#2}{#3 #4}{#5}%
-\svnkwdef{Filename}{#1}%
-\svnkwdef{Date}{#3 #4}%
-\svnkwdef{Revision}{#2}%
-\svnkwdef{Author}{#5}%
-}
-% \end{macrocode}
-% \end{macro}
-%
-
-% \begin{macro}{\@svn@updateid}
-% We first define the expanded arguments to variables for the user.
-% The expansion is needed because the arguments content is mostly generic like
-% |\svn@key| and |\svn@value| which can change very soon after this macro.
-% \begin{macrocode}
-\def\@svn@updateid#1#2#3{% #1 = rev, #2 date, #3 author (username)
-\xdef\svnfilerev{#1}%
-\xdef\svnfiledate{#2}%
-\xdef\svnfileauthor{#3}%
-% \end{macrocode}
-% Then we check if the revision is non-empty (not yet expanded by
-% subversion?) and larger then the current maximum value |\@svn@rev|.
-% If yes we save all value to save them in the .svn-file later.
-% \begin{macrocode}
-\ifx\svnfilerev\empty\else
-\ifnum\@svn@rev<\svnfilerev
-\xdef\@svn@rev{#1}%
-\xdef\@svn@date{#2}%
-\xdef\@svn@author{#3}%
-\xdef\@svn@year{\svnfileyear}%
-\xdef\@svn@month{\svnfilemonth}%
-\xdef\@svn@day{\svnfileday}%
-\xdef\@svn@hour{\svnfilehour}%
-\xdef\@svn@minute{\svnfileminute}%
-\xdef\@svn@second{\svnfilesecond}%
-\xdef\@svn@timezonehour{\svnfiletimezonehour}%
-\xdef\@svn@timezoneminute{\svnfiletimezoneminute}%
-\else\fi
-\fi
+ \@svn@scandate{#3 #4}%
+ \@svn@updateid{#2}{#3 #4}{#5}{#1}%
+ \svnkwdef{Filename}{#1}%
+ \svnkwdef{Date}{#3 #4}%
+ \svnkwdef{Revision}{#2}%
+ \svnkwdef{Author}{#5}%
}
% \end{macrocode}
% \end{macro}
%
+% \begin{macro}{\@svn@updateid}[4]{rev}{date}{author (username)}{url}
+% We first define the expanded arguments to variables for the user. The
+% expansion is needed because the arguments content is mostly generic like
+% |\svn@value| which can change very soon after this macro.
+% \begin{macrocode}
+\def\@svn@updateid#1#2#3#4{%
+ \xdef\svnfilerev{#1}%
+ \xdef\svnfiledate{#2}%
+ \xdef\svnfileauthor{#3}%
+ \xdef\svnfileurl{#4}%
+ \svn@getfilename\svnfileurl%
+% \end{macrocode}
+% Then we check if the revision is non-empty (not yet expanded by subversion?)
+% and larger then the current maximum value |\@svn@rev|. If yes we save all
+% value to save them in the .svn-file later.
+% \begin{macrocode}
+ \ifx\svnfilerev\empty\else
+ \ifnum\@svn@rev<\svnfilerev
+ \xdef\@svn@rev{\svnfilerev}%
+ \xdef\@svn@date{\svnfiledate}%
+ \xdef\@svn@author{\svnfileauthor}%
+ \xdef\@svn@year{\svnfileyear}%
+ \xdef\@svn@month{\svnfilemonth}%
+ \xdef\@svn@day{\svnfileday}%
+ \xdef\@svn@hour{\svnfilehour}%
+ \xdef\@svn@minute{\svnfileminute}%
+ \xdef\@svn@second{\svnfilesecond}%
+ \xdef\@svn@timezonehour{\svnfiletimezonehour}%
+ \xdef\@svn@timezoneminute{\svnfiletimezoneminute}%
+ \xdef\@svn@url{\svnfileurl}%
+ \xdef\@svn@fname{\svnfilefname}%
+ \fi
+
+ \if@svnmulti@groups
+ \ifx\svn@g\empty\else
+ \svn@updategroup{\svn@g}%
+ \fi
+ \if@svnmulti@subgroups
+ \ifsvnsubgroups
+ \svn@updategroup{\svn@filedir\svn@filebase}%
+ \fi
+ \fi
+ \fi
+ \fi
+}
+
+\def\@svncg@save#1#2{%
+ \expandafter\xdef\csname @svng@\svn@g @#1\endcsname{#2}%
+}
+
+% \end{macrocode}
+% \end{macro}
+%
+
% \subsubsection{Long Id}
% \begin{macro}{\svnidlong}
% We clear the keyword value first to reduce the risk though bad user input.
% \begin{macrocode}
\newcommand{\svnidlong}{%
-\svnkwdef{HeadURL}{}%
-\svnkwdef{LastChangedDate}{}%
-\svnkwdef{LastChangedRevision}{0}%
-\svnkwdef{LastChangedBy}{}%
+ \svnkwdef{HeadURL}{}%
+ \svnkwdef{LastChangedDate}{}%
+ \svnkwdef{LastChangedRevision}{0}%
+ \svnkwdef{LastChangedBy}{}%
% \end{macrocode}
-% The catcodes are changed by \cs{svn@catcodes} to allow \TeX-special characters
-% inside the keywords.
-% The braces \{ \} are changed to allow comments between the arguments.
-% \cs{svnidlong@readargsfull} is called to read the arguments.
+% The catcodes are changed by \cs{svn@catcodes} to allow \TeX-special characters
+% inside the keywords. The braces |{ }| are changed to allow comments between
+% the arguments. \cs{svnidlong@readargsfull} is called to read the arguments.
% \begin{macrocode}
-\begingroup
-\svn@catcodes
-\catcode`\{=12
-\catcode`\}=12
-\svnidlong@readargsfull
+ \begingroup
+ \if@svnmulti@verbatim
+ \svn@catcodes
+ \catcode`\{=12
+ \catcode`\}=12
+ \else
+ \def\svnidlong@readargsfull{\svnidlong@readargs}%
+ \fi
+ \svnidlong@readargsfull
}
% \end{macrocode}
% \end{macro}
% \begin{macro}{\svn@catcodes}
% Changes all \TeX-special character to category ``other''. The newline aka
-% return is changed to category ``ignore'' so line breaks are not taken as
-% part of the verbatim arguments.
+% return is changed to category ``ignore'' so line breaks are not taken as part
+% of the verbatim arguments.
% \begin{macrocode}
+\if@svnmulti@verbatim
\def\svn@catcodes{%
-\let\do\@makeother \dospecials
-\catcode`\^^M9 \catcode`\ 10
-\catcode`\{1 \catcode`\}2
+ \let\do\@makeother
+ \dospecials
+ \catcode`\^^M9
+ \catcode`\ 10
+ \catcode`\{1
+ \catcode`\}2
}
+\else
+ \def\svn@catcodes{}
+\fi
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnidlong@readargsfull}
+% \begin{macro}{\svnidlong@readargsfull}[8]
+% {some text, ignored}{Keyword 1}
+% {some text, ignored}{Keyword 2}
+% {some text, ignored}{Keyword 3}
+% {some text, ignored}{Keyword 4}
% Reads all four arguments of \cs{svnidlong} and passes them to
% \cs{svnidlong@readargs}. The normal argument braces are changed to category
% ``other'' and put into the macros parameter text to remove all code between
% them. This is done to avoid problems with comments direct after one of the
-% arguments. Because the braces are now non-special the parentheses are made
-% to a local replacement.
+% arguments. Because the braces are now non-special the parentheses are made to
+% a local replacement.
%
% \begin{macrocode}
+\if@svnmulti@verbatim
\begingroup
\catcode`\{=12\catcode`\}=12
\catcode`\(=1\catcode`\)=2
@@ -706,113 +1867,118 @@
\svnidlong@readargs(#2)(#4)(#6)(#8)%
)
\endgroup
+\fi
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnidlong@readargs}
+% \begin{macro}{\svnidlong@readargs}[4]{Keyword 1}{Keyword 2}{Keyword 3}
+% {Keyword 4}
% Calls sub macro for all four arguments and ends the catcode changes made
% by \cs{svnidlong}.
% \begin{macrocode}
\def\svnidlong@readargs#1#2#3#4{%
-\svnkwsave@read #1\relax
-\svnkwsave@read #2\relax
-\svnkwsave@read #3\relax
-\svnkwsave@read #4\relax
-\endgroup
+ \svnkwsave@read #1\relax
+ \svnkwsave@read #2\relax
+ \svnkwsave@read #3\relax
+ \svnkwsave@read #4\relax
+ \endgroup
% \end{macrocode}
% Now the update macros for date and id are called.
% \begin{macrocode}
-\ifx\svnkwLastChangedDate\empty
-\else\@svn@scanlongdate{\svnkwLastChangedDate}\fi
-\@svn@updateid{\svnkw{LastChangedRevision}}{\svnkw{LastChangedDate}}
-{\svnkw{LastChangedBy}}%
-\ignorespaces
+ \ifx\svnkwLastChangedDate\empty\else
+ \@svn@scanlongdate{\svnkwLastChangedDate}%
+ \fi
+ \@svn@updateid{\svnkw{LastChangedRevision}}{\svnkw{LastChangedDate}}%
+ {\svnkw{LastChangedBy}}{\svnkw{HeadURL}}%
+ \ignorespaces
}%
% \end{macrocode}
% \end{macro}
% \subsection{KeyWord Macros}
% \begin{macro}{\svnkwsave}
-% Save macro. Takes a dollar wrapped keyword string, reads it though
-% \cs{svn@readkw} and saves it using \cs{svnkwdef}.
+% Enabled verbatim mode and uses a sub macro to read the arguments afterwards.
% \begin{macrocode}
\def\svnkwsave{%
-\begingroup
-\svn@catcodes
-\svnkwsave@readargs
-}
+ \begingroup
+ \svn@catcodes
+ \svnkwsave@readargs
+}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnkwsave@readargs}
+% \begin{macro}{\svnkwsave@readargs}[1]{\$kw: value\$}
% Reads full argument, calls parse submacro and ends catcode changes.
% If \cs{svnkwsave} was called by \cs{svnid} scans the id keyword by calling the
% scan macro.
% \begin{macrocode}
\gdef\svnkwsave@readargs#1{%
-\svnkwsave@read#1\relax
-\endgroup
-\if@svnidsw
- \ifx\svnkwId\empty
- \else
- \expandafter
- \svn@scanId\svnkwId\relax
- \@svnidswfalse
+ \svnkwsave@read#1\relax
+ \endgroup
+ \if@svnidsw
+ \ifx\svnkwId\empty\else
+ \expandafter
+ \svn@scanId\svnkwId\relax
+ \@svnidswfalse
+ \fi
\fi
-\fi
-\ignorespaces
+ \ignorespaces
}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnkwsave@read}
+% \begin{macro}{\svnkwsave@read}[1]{keyword line without surrounding \$ \$}
% Reads the full keyword and strips the dollars.
% \begin{macrocode}
\begingroup
+\if@svnmulti@verbatim
\catcode`\$=12
+\fi
\gdef\svnkwsave@read $#1$\relax{%
- \svn@checkcolon#1:\relax
+ \svn@checkcolon#1:\relax
}
\endgroup
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnkwsave@parse}
+% \begin{macro}{\svnkwsave@parse}[2]{key}{value}
% Parse the keyword and save it away.
% \begin{macrocode}
\begingroup
\catcode`\$=11
\gdef\svnkwsave@parse$#1:#2${%
-\expandafter\xdef\csname svnkw#1\endcsname{#2}}
+ \expandafter\xdef\csname svnkw#1\endcsname{#2}%
+}%
\endgroup
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnkwdef}
+% \begin{macro}{\svnkwdef}[2]{key}{value}
% First we check if there is a `setter'-macro for the keyword called
% \cs{svnkwdef@}\meta{keyword}.
% \begin{macrocode}
\newcommand{\svnkwdef}[2]{%
-\@ifundefined{svnkwdef@#1}
+ \@ifundefined{svnkwdef@#1}%
% \end{macrocode}
% If not we call the general macro \cs{svnkwdef@}.
% \begin{macrocode}
-{\svnkwdef@{#1}{#2}}
+ {\svnkwdef@{#1}{#2}}%
% \end{macrocode}
% If yes we just call it with the value as argument.
% \begin{macrocode}
-{\csname svnkwdef@#1\endcsname{#2}}%
+ {\csname svnkwdef@#1\endcsname{#2}}%
}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svnkwdef@}
+% \begin{macro}{\svnkwdef@}[2]{key}{value}
% This macro defines the second argument under \cs{svnkw}\meta{1st argument}.
-% The |\xdef| is used to expand the content first (needed for internal use)
-% and make the definition globally.
+% The |\xdef| is used to expand the content first (needed for internal use) and
+% make the definition globally.
% \begin{macrocode}
-\newcommand{\svnkwdef@}[2]
-{\expandafter\xdef\csname svnkw#1\endcsname{#2}}
+\newcommand{\svnkwdef@}[2]{%
+ \expandafter\xdef\csname svnkw#1\endcsname{#2}%
+}
% \end{macrocode}
% Example: |\svnkwdef{Revision}{23}| will define |\svnkwRevision| as 23.
% \end{macro}
@@ -820,16 +1986,23 @@
% \begin{macro}{\svnkwdef@Rev}
% \begin{macro}{\svnkwdef@Author}
% \begin{macro}{\svnkwdef@Date}
-% `Setter'-macros for single keywords, used by \cs{svnkwdef}.\\
-% These are needed to have have a common value for all alternative keyword
-% names ala |Rev|, |Revision|, |LastChangedRevision|.
+% \begin{macro}{\svnkwdef@URL}[1]{value}
+% `Setter'-macros for single keywords, used by \cs{svnkwdef}.\\ These are needed
+% to have have a common value for all alternative keyword names ala |Rev|,
+% |Revision|, |LastChangedRevision|.
%
-% The keywords |Rev|, |Author| and |Date|
-% are just calling \cs{svnkwdef@} with a fixed first argument.
+% The keywords |Author| and |Date| are just calling \cs{svnkwdef@} with a fixed
+% first argument. For the revision the value is checked if empty and then a 0
+% is substituted.
% \begin{macrocode}
-\def\svnkwdef@Rev#1{\svnkwdef@{Rev}{#1}}
+\def\svnkwdef@Rev#1{%
+ \svn@ifempty{#1}%
+ {\svnkwdef@{Rev}{0}}%
+ {\svnkwdef@{Rev}{#1}}%
+}
\def\svnkwdef@Author#1{\svnkwdef@{Author}{#1}}
\def\svnkwdef@Date#1{\svnkwdef@{Date}{#1}}
+\def\svnkwdef@URL#1{\svnkwdef@{HeadURL}{#1}}
% \end{macrocode}
% The long keywords are defined then as aliases of the short,\\
% first for writing
@@ -845,12 +2018,14 @@
\def\svnkwLastChangedRevision{\svnkwRev}
\def\svnkwLastChangedBy{\svnkwAuthor}
\def\svnkwLastChangedAt{\svnkwDate}
+\def\svnkwURL{\svnkwHeadURL}
% \end{macrocode}
% So \eg |\svnkw{LastChangedRevision}| is always be the
% same as |\svnkw{Rev}|.
% \end{macro}
% \end{macro}
% \end{macro}
+% \end{macro}
% We define default values for normal keywords. Keyword |Filename| is the name
% given by |Id| and not a real keyword.
@@ -862,142 +2037,174 @@
\svnkwdef{HeadURL}{}
% \end{macrocode}
-% \begin{macro}{\svnkw}
+% \begin{macro}{\svnkw}[1]{keyword name}
% Macro to get keyword value. Just calls \cs{svnkw}\meta{ARGUMENT} where
% the argument interpreted as text. So \eg |\svnkw{Date}| is the same as
-% |\svnkwDate| but this could be changed later so always use this interface
+% |svnkwDate| but this could be changed later so always use this interface
% to get the keyword values.
%
% \changes{v1.2}{2007/06/22}{Added warning when a wrong, maybe
% misspelled, keyword is given.}
% \begin{macrocode}
\newcommand{\svnkw}[1]{%
-\@ifundefined{svnkw#1}
-{\PackageWarning{svn-multi}{SVN keyword '#1' not defined (typo?)}}
-{\csname svnkw#1\endcsname}}%
+ \@ifundefined{svnkw#1}%
+ {\PackageWarning{svn-multi}{SVN keyword '#1' not defined (typo?)}}%
+ {\csname svnkw#1\endcsname}%
+}%
% \end{macrocode}
% \end{macro}
%
% \subsection{Keyword check and strip macros}
% The following macros are used to test whether the given keywords are fully
-% expanded or not.
+% expanded or not.
% Subversion supports unexpanded keywords as input with or without colon and
-% with or without trailing space(s), \ie a:~|$KW$|, b:~|$KW:$| or c:~|$KW: $|.
-% To avoid \LaTeX{} syntax errors in this pre-commit state the keyword is
-% checked by the following macros. Unexpanded keywords result in an empty value.
+% with or without trailing space(s), \ie a:~|$KW$|, b:~|$KW:$| or c:~|$KW: $|.
+% To avoid \LaTeX{} syntax errors in this pre-commit state the keyword is
+% checked by the following macros. Unexpanded keywords result in an empty value.
% Also leading and trailing spaces are removed.
%
-% \begin{macro}{\svn@checkcolon}
-% Checks if the keyword contains a colon. It is called by \cs{svnkwsave@read}
-% with a trailing |:\relax| so that \#2 will be empty if there is no earlier
-% colon or will hold the value with this trailing colon otherwise.
-% The first case means that the keyword is unexpanded without colon (case a)
-% which leads to an empty value. In the second case \cs{svn@stripcolon} is
-% called to strip the colon and surrounding spaces. The final value is
+% \begin{macro}{\svn@checkcolon}[2]{key}{potential value, might be empty}
+% Checks if the keyword contains a colon. It is called by \cs{svnkwsave@read}
+% with a trailing |:\relax| so that \#2 will be empty if there is no earlier
+% colon or will hold the value with this trailing colon otherwise.
+% The first case means that the keyword is unexpanded without colon (case a)
+% which leads to an empty value. In the second case \cs{svn@stripcolon} is
+% called to strip the colon and surrounding spaces. The final value is
% returned by |\svn@value|.
% \begin{macrocode}
\def\svn@checkcolon#1:#2\relax{%
- \def\svn@test{#2}%
- \ifx\svn@test\empty
- \svnkwdef{#1}{}%
- \else
- \svn@stripcolon#2\relax
- \svnkwdef{#1}{\svn@value}%
- \fi
+ \svn@ifempty{#2}%
+ {\svnkwdef{#1}{}}%
+ {\svn@stripcolon#2\relax\svnkwdef{#1}{\svn@value}}%
}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svn@stripcolon}
+% \begin{macro}{\svn@stripcolon}[1]{potential value}
% Strips the previous added colon (for \cs{svn@checkcolon}).
% The remaining argument is checked if it's empty (case b) or only a space
% (case c). Otherwise the keyword is expanded and \cs{svn@stripspace} is
% called to strip the spaces.
% \begin{macrocode}
\def\svn@stripcolon#1:\relax{%
- \def\svn@test{#1}%
- \ifx\svn@test\empty
- \gdef\svn@value{}%
- \else
- \ifx\svn@test\svn@spaceonly
- \gdef\svn@value{}%
- \else
- \svn@stripspace#1\relax\relax
- \fi\fi
+ \svn@ifempty{#1}%
+ {\gdef\svn@value{}}%
+ {\svn@ifequal{#1}{ }%
+ {\gdef\svn@value{}}%
+ {\svn@stripspace#1\relax\relax}%
+ }%
}
-
-\def\svn@spaceonly{ }
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svn@stripspace}
+% \begin{macro}{\svn@stripspace}[2]{first character}{rest of string}
% Strips leading space if present and calls \cs{svn@striptrailingspace} to
% strip the trailing space.
% \begin{macrocode}
\def\svn@stripspace#1#2\relax{%
- \def\svn@test{#1}%
- \ifx\svn@test\svn@spaceonly
- \gdef\svn@value{#2}%
- \else
- \svn@striptrailingspace#1#2\relax
- \fi
+ \svn@ifequal{#1}{ }%
+ {\gdef\svn@value{#2}}%
+ {\svn@striptrailingspace#1#2\relax}%
}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\svn@striptrailingspace}
+% \begin{macro}{\svn@striptrailingspace}[1]{string}
% Strips trailing space using the macros parameter text. Must be called with
% |\relax| as end marker.
% \begin{macrocode}
\def\svn@striptrailingspace#1 \relax{%
- \gdef\svn@value{#1}%
+ \gdef\svn@value{#1}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@gdefverb}[1]{macro}
+% \begin{macrocode}
+\def\svn@gdefverb#1{%
+ \begingroup
+ \def\svn@temp{#1}%
+ \begingroup
+ \if@svnmulti@verbatim
+ \svn@catcodes
+ \fi
+ \svn@gdefverb@
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@defverb@}[1]{verbatim stuff}
+% \begin{macrocode}
+\def\svn@gdefverb@#1{%
+ \endgroup
+ \expandafter\gdef\svn@temp{#1}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@namegdefverb}[1]{macro name}
+% \begin{macrocode}
+\def\svn@namegdefverb#1{%
+ \begingroup
+ \expandafter\def
+ \expandafter\svn@temp
+ \expandafter{\csname #1\endcsname}%
+ \begingroup
+ \if@svnmulti@verbatim
+ \svn@catcodes
+ \fi
+ \svn@gdefverb@
}
% \end{macrocode}
% \end{macro}
+
% \subsection{Date Macros}
-% \begin{macro}{\@svn@scandate}
-% Scans data informations in Id keyword and saves them in macros.
+% \begin{macro}{\@svn@scandate}[1]{date}
+% Scans data information in Id keyword and saves them in macros.
% \begin{macrocode}
\def\@svn@scandate#1{\@svn@scandate@#1\relax}
\def\@svn@scandate@#1-#2-#3 #4:#5:#6#7#8\relax{%
-\gdef\svnfileyear{#1}%
-\gdef\svnfilemonth{#2}%
-\gdef\svnfileday{#3}%
-\gdef\svnfilehour{#4}%
-\gdef\svnfileminute{#5}%
-\gdef\svnfilesecond{#6#7}%
-\gdef\svnfiletimezonehour{+00}%
-\gdef\svnfiletimezoneminute{00}% #8 always 'Z' for Zulu-time (UTC)
+ \gdef\svnfileyear{#1}%
+ \gdef\svnfilemonth{#2}%
+ \gdef\svnfileday{#3}%
+ \gdef\svnfilehour{#4}%
+ \gdef\svnfileminute{#5}%
+ \gdef\svnfilesecond{#6#7}%
+ \gdef\svnfiletimezonehour{+00}%
+ \gdef\svnfiletimezoneminute{00}% #8 always 'Z' for Zulu-time (UTC)
}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\@svn@scanlongdate}
-% Scans data informations in Date keyword and saves them in macros.
+% \begin{macro}{\@svn@scanlongdate}[8]{Year}{Month}{Day}{Hour}{Minute}{Second}
+% {Timezone}{Date description string (ignored)}
+% Scans date information in Date keyword and saves them in macros.
% \begin{macrocode}
\def\@svn@scanlongdate#1{\expandafter\@svn@scanlongdate@#1\relax}
%
\def\@svn@scanlongdate@#1-#2-#3 #4:#5:#6 #7 #8\relax{%
-\gdef\svnfileyear{#1}%
-\gdef\svnfilemonth{#2}%
-\gdef\svnfileday{#3}%
-\gdef\svnfilehour{#4}%
-\gdef\svnfileminute{#5}%
-\gdef\svnfilesecond{#6}%
-\@svn@parsetimezone#7\relax%
+ \gdef\svnfileyear{#1}%
+ \gdef\svnfilemonth{#2}%
+ \gdef\svnfileday{#3}%
+ \gdef\svnfilehour{#4}%
+ \gdef\svnfileminute{#5}%
+ \gdef\svnfilesecond{#6}%
+ \@svn@parsetimezone#7\relax%
}
% \end{macrocode}
% \end{macro}
-% \begin{macro}{\@svn@parsetimezone}
+% \begin{macro}{\@svn@parsetimezone}[5]{sign (+/-)}{hour first digit}{hour
+% second digit}{minute first digit}{minute second digit}
% Scans timezone and splits hour and minute part.
% \begin{macrocode}
\def\@svn@parsetimezone#1#2#3#4#5\relax{%
-\gdef\svnfiletimezonehour{#1#2#3}%
-\gdef\svnfiletimezoneminute{#4#5}%
+ \gdef\svnfiletimezonehour{#1#2#3}%
+ \gdef\svnfiletimezoneminute{#4#5}%
}
% \end{macrocode}
% \end{macro}
@@ -1005,8 +2212,10 @@
% \begin{macro}{\svnpdfdate}
% Returns date in a format needed for |\pdfinfo|.
% \begin{macrocode}
-\def\svnpdfdate{\svnyear\svnmonth\svnday
-\svnhour\svnminute\svnsecond\svntimezonehour'\svntimezoneminute'}
+\def\svnpdfdate{%
+ \svnyear\svnmonth\svnday
+ \svnhour\svnminute\svnsecond\svntimezonehour'\svntimezoneminute'%
+}
% \end{macrocode}
% \end{macro}
@@ -1016,20 +2225,20 @@
% Will be called automatically in the preamble.
% \changes{v1.2}{2007/06/22}{New macro}
% \begin{macrocode}
-\newcommand{\svnsetmainfile}
-{\edef\svnmainurl{\svnkw{HeadURL}}
-\edef\svnmainfilename{\svnkw{Filename}}}
+\newcommand{\svnsetmainfile}{%
+ \xdef\svnmainurl{\svnfileurl}%
+ \xdef\svnmainfilename{\svnfilefname}%
+}
\AtBeginDocument{\svnsetmainfile}
% \end{macrocode}
% \end{macro}
% \subsection{Register and FullName Macros}
-% \begin{macro}{\svnRegisterAuthor}
-% Saves the author's name by defining
-% |\svn@author@|\meta{username} to it.
+% \begin{macro}{\svnRegisterAuthor}[2]{author username}{Full Name}
+% Saves the author's name by defining |svn@author@|\meta{username} to it.
% \begin{macrocode}
\newcommand{\svnRegisterAuthor}[2]{%
-\expandafter\def\csname svn@author@#1\endcsname{#2}%
+ \expandafter\def\csname svn@author@#1\endcsname{#2}%
}
% \end{macrocode}
% \end{macro}
@@ -1037,41 +2246,55 @@
% \begin{macro}{\svnFullAuthor}
% \begin{macro}{\svnFullAuthor*}
% We test if the starred or the normal version is used and call the
-% appropriate submacro |\svnFullAuthor@star| or |\svnFullAuthor@normal|.
+% appropriate submacro |svnFullAuthor@star| or |svnFullAuthor@normal|.
% \changes{v1.2}{2007/06/22}{Macro now returns the username if the full name
% was not registered.}
% \begin{macrocode}
\newcommand{\svnFullAuthor}{%
-\@ifnextchar{*}
-{\svnFullAuthor@star}
-{\svnFullAuthor@normal}
-}
+ \@ifnextchar{*}%
+ {\svnFullAuthor@star}%
+ {\svnFullAuthor@normal}%
+}%
% \end{macrocode}
-% Both submacros are calling |\svnFullAuthor@| but with different arguments.
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\svnFullAuthor@star}[1]{username}
+% Both submacros are calling |svnFullAuthor@| but with different arguments.
% The star macro also removes the star of course.
% \begin{macrocode}
-\def\svnFullAuthor@star*#1{\svnFullAuthor@{#1}{~(#1)}}
-\def\svnFullAuthor@normal#1{\svnFullAuthor@{#1}{}}
+\def\svnFullAuthor@star*#1{%
+ \edef\svn@temp{#1}%
+ \svnFullAuthor@{\svn@temp}{~(\svn@temp)}%
+}%
% \end{macrocode}
-% |\svnFullAuthor@| now sets the author's full name. Note that |#2| is empty
+% \end{macro}
+% \begin{macro}{\svnFullAuthor@normal}[1]{username}
+% \begin{macrocode}
+\def\svnFullAuthor@normal#1{%
+ \edef\svn@temp{#1}%
+ \svnFullAuthor@{\svn@temp}{}%
+}%
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svnFullAuthor@}[2]{username}{previous defined trailing string}
+% |svnFullAuthor@| now sets the author's full name. Note that |#2| is empty
% when the normal version is called.
% \begin{macrocode}
\def\svnFullAuthor@#1#2{%
-\@ifundefined{svn@author@#1}
-{#1}
-{\csname svn@author@#1\endcsname #2}%
+ \@ifundefined{svn@author@#1}%
+ {#1}%
+ {\csname svn@author@#1\endcsname #2}%
}
% \end{macrocode}
% \end{macro}
-% \end{macro}
-% \begin{macro}{\svnRegisterRevision}
+% \begin{macro}{\svnRegisterRevision}[2]{revision number}{tag name}
% Saves the revision's name or tag by defining
-% |\svn@revision@|\meta{revisionnumber} to it.
+% |svn@revision@|\meta{revisionnumber} to it.
% \changes{v1.2}{2007/06/22}{New macro}
% \begin{macrocode}
\newcommand{\svnRegisterRevision}[2]{%
-\expandafter\def\csname svn@revision@#1\endcsname{#2}
+ \expandafter\def\csname svn@revision@#1\endcsname{#2}%
}
% \end{macrocode}
% \end{macro}
@@ -1079,91 +2302,1555 @@
% \begin{macro}{\svnFullRevision}
% \begin{macro}{\svnFullRevision*}
% We test if the starred or the normal version is used and call the
-% appropriate submacro |\svnFullRevision@star| or |\svnFullRevision@normal|.
+% appropriate submacro |svnFullRevision@star| or |svnFullRevision@normal|.
% \changes{v1.2}{2007/06/22}{New macro}
% \begin{macrocode}
\newcommand{\svnFullRevision}{%
-\@ifnextchar{*}
-{\svnFullRevision@star}
-{\svnFullRevision@normal}
+ \@ifnextchar{*}%
+ {\svnFullRevision@star}%
+ {\svnFullRevision@normal}%
}
% \end{macrocode}
-% Both submacros are calling |\svnFullRevision@| but with different arguments.
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\svnFullRevision@star}[1]{revision number}
+% Both submacros are calling |svnFullRevision@| but with different arguments.
% The star macro also removes the star of course.
% \begin{macrocode}
-\def\svnFullRevision@star*#1{\svnFullRevision@{#1}{~(r#1)}}
-\def\svnFullRevision@normal#1{\svnFullRevision@{#1}{}}
+\def\svnFullRevision@star*#1{%
+ \edef\svn@temp{#1}%
+ \svnFullRevision@{\svn@temp}{~(r\svn@temp)}%
+}
% \end{macrocode}
-% |\svnFullRevision@| now sets the revision name. Note that |#2| is empty
+% \end{macro}
+% \begin{macro}{\svnFullRevision@normal}[1]{revision number}
+% \begin{macrocode}
+\def\svnFullRevision@normal#1{%
+ \edef\svn@temp{#1}%
+ \svnFullRevision@{\svn@temp}{}%
+}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svnFullRevision@}[2]{revision number}{previous defined trailing
+% string}
+% |svnFullRevision@| now sets the revision name. Note that |#2| is empty
% when the normal version is called.
% \begin{macrocode}
\def\svnFullRevision@#1#2{%
-\@ifundefined{svn@revision@#1}
-{Revision #1}
-{\csname svn@revision@#1\endcsname #2}%
+ \@ifundefined{svn@revision@#1}%
+ {Revision #1}%
+ {\csname svn@revision@#1\endcsname #2}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \subsection{Input File Name}
+% The \pkg{fink} package is used to get the input file names. AtBegin/AtEnd
+% hooks are installed which will be used later.
+% \begin{macrocode}
+\if@svnmulti@filehooks
+% \end{macrocode}
+
+% Load \pkg{fink} package and check if all needed macros are provided.
+% \begin{macrocode}
+\RequirePackage{fink}[2008/02/27]
+\begingroup
+\def\svn@finkerror{%
+\PackageError{svn-multi}{Your installed version of the 'fink' package does not
+provide the needed macros. It is either too old or too new.
+Try a different version, e.g. v2.1.1 from 2008/02/27}{}%
+\let\svn@finkerror\relax
+}
+\@ifundefined{finkpath}{\svn@finkerror}{}%
+\@ifundefined{finkdir}{\svn@finkerror}{}%
+\@ifundefined{finkbase}{\svn@finkerror}{}%
+\@ifundefined{fink@prepare}{\svn@finkerror}{}%
+\@ifundefined{fink@restore}{\svn@finkerror}{}%
+\@ifundefined{fnk@maindir}{\svn@finkerror}{}%
+\@ifundefined{fnk@mainext}{\svn@finkerror}{}%
+\endgroup
+% \end{macrocode}
+
+% \begin{macro}{\svn@removedotslash}[1]{string (\eg file path) which might start
+% with \texttt{./}}
+% Removes leading './' from given macro (holding a directory path). Awaits a
+% macro as argument which is redefined inside the current group!
+% \begin{macrocode}
+\def\svn@removedotslash#1{%
+ \def\svn@removedotslash@##1##2##3\relax{%
+ \svn@ifequal{./}{##1##2}%
+ {\edef#1{##3}\def\next{\svn@removedotslash@##3\empty\empty\empty\relax}}%
+ {\edef#1{##1##2##3}\let\next\relax}%
+ \next
+ }%
+ \expandafter\svn@removedotslash@#1\empty\empty\empty\relax
+}
+% \end{macrocode}
+% \end{macro}
+
+% Init values for file name macros.
+% \begin{macrocode}
+\let\svn@mainext\fnk@mainext
+\let\svn@maindir\fnk@maindir
+\svn@removedotslash\svn@maindir
+\edef\svn@filebase{\jobname}%
+\edef\svn@fileext{\svn@mainext}%
+\edef\svn@filedir{\svn@maindir}%
+% \end{macrocode}
+% Filename and -path are build using the other macros:
+% \begin{macrocode}
+\def\svn@filename{\fink@file\svn@filebase\svn@fileext}%
+\def\svn@filepath{\svn@filedir\svn@filename}%
+% \end{macrocode}
+
+% \begin{macro}{\svnmulti@begininputfilehook}
+% This hook is installed in the |\fink@prepare| macro from the \pkg{fink}
+% package which will be executed at the begin of a input file. The file name and
+% path are not yet in |\finkpath| etc. but in |\fink@nextpath|.
+% \begin{macrocode}
+\def\svnmulti@begininputfilehook{}
+\message{Package svn-multi: patching macro '\string\fink@prepare' from the
+'fink' package!}%
+\let\svnmulti@fink@prepare\fink@prepare
+\renewcommand*{\fink@prepare}[1]{%
+ \svnmulti@fink@prepare{#1}%
+ \if@svnmulti@groups
+ \svn@ifequal{\svn@filepath}{\jobname.\svn@mainext}%
+ {\global\let\svn@pg\svn@g}%
+ {\xdef\svn@pg{\svn@filedir\svn@filebase}}%
+ \fi
+ \xdef\svn@filebase{\fink@nextbase}%
+ \xdef\svn@fileext{\fink@nextext}%
+ \xdef\svn@filedir{\fink@nextdir}%
+ \svn@removedotslash\svn@filedir
+ \svnmulti@begininputfilehook
+}%
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnmulti@endinputfilehook}
+% This hook is installed in the |\fink@restore| macro from the \pkg{fink}
+% package which will be executed at the end of a input file. The file path
+% |\finkpath| etc. is still valid.
+% \begin{macrocode}
+\def\svnmulti@endinputfilehook{}
+\message{Package svn-multi: patching macro '\string\fink@restore' from the
+'fink' package!}%
+\let\svnmulti@fink@restore\fink@restore
+\def\fink@restore#1{%
+ \svnmulti@endinputfilehook
+ \svnmulti@fink@restore{#1}%
+ \xdef\svn@filebase{\finkbase}%
+ \xdef\svn@fileext{\finkext}%
+ \xdef\svn@filedir{\finkdir}%
+ \svn@removedotslash\svn@filedir
+}%
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnmulti@atbegininputfile}
+% This macro adds the argument to the end of the \cs{svnmulti@begininputfilehook}.
+% \begin{macrocode}
+\def\svnmulti@atbegininputfile{%
+ \g@addto@macro\svnmulti@begininputfilehook
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnmulti@atendinputfile}
+% This macro adds the argument to the \emph{begin} of the
+% \cs{svnmulti@endinputfilehook}. This ensures that code added first is more at
+% the end than code added later.
+% The code below was adapted from the definition of the \LaTeX2e macro
+% |\g@addto@macro| which was used above.
+% \begin{macrocode}
+\long\def\svnmulti@atendinputfile#1{%
+ \begingroup
+ \@temptokena\expandafter{\svnmulti@endinputfilehook}%
+ \toks@{#1}%
+ \xdef\svnmulti@endinputfilehook{\the\toks@\the\@temptokena}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macrocode}
+\def\svn@filestack{{}}
+
+\def\svn@pushfilestack{%
+ \xdef\svn@filestack{{%
+ {\svnfilerev}%
+ {\svnfiledate}%
+ {\svnfileauthor}%
+ {\svnfileyear}%
+ {\svnfilemonth}%
+ {\svnfileday}%
+ {\svnfilehour}%
+ {\svnfileminute}%
+ {\svnfilesecond}%
+ {\svnfiletimezonehour}%
+ {\svnfiletimezoneminute}%
+ {\svnfileurl}%
+ {\svnfilefname}%
+ {\svn@g}%
+ {\svn@pg}%
+ }\svn@filestack}%
+}
+
+\def\svn@restorefilekws#1#2\relax{%
+ \svn@restorefilekws@#1\empty
+ \empty \empty \empty \empty
+ \empty \empty \empty \empty
+ \empty \empty \empty \empty
+ \svn@ifempty{#2}%
+ {\gdef\svn@filestack{{}}}%
+ {\gdef\svn@filestack{#2}}%
+}
+\def\svn@restorefilekws@#1#2#3#4#5#6#7#8#9{%
+ \gdef\svnfilerev{#1}%
+ \gdef\svnfiledate{#2}%
+ \gdef\svnfileauthor{#3}%
+ \gdef\svnfileyear{#4}%
+ \gdef\svnfilemonth{#5}%
+ \gdef\svnfileday{#6}%
+ \gdef\svnfilehour{#7}%
+ \gdef\svnfileminute{#8}%
+ \gdef\svnfilesecond{#9}%
+ \svn@restorefilekws@@
+}
+
+\def\svn@restorefilekws@@#1#2#3#4#5#6{%
+ \gdef\svnfiletimezonehour{#1}%
+ \gdef\svnfiletimezoneminute{#2}%
+ \gdef\svnfileurl{#3}%
+ \gdef\svnfilefname{#4}%
+ \gdef\svn@g{#5}%
+ \gdef\svn@pg{#6}%
+}
+
+\def\svn@popfilestack{%
+ \ifx\svn@filestack\empty
+ \PackageWarning{svn-multi}{Underflow of file keyword stack!}%
+ \else
+ \svn@ifequal{\svn@filestack}{{}}%
+ {\PackageWarning{svn-multi}{Underflow of file keyword stack!}}%
+ {\expandafter\svn@restorefilekws\svn@filestack\relax}%
+ \fi
+}
+
+\svnmulti@atbegininputfile{%
+ \svn@pushfilestack
+}
+
+\svnmulti@atendinputfile{%
+ \svn@popfilestack
+}%
+%
+% \end{macrocode}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+
+% \subsection{Keyword Group Macros}
+% These macros implement the user interface for the keyword group functionality
+% introduced with v2.0.
+%
+% The list of keyword groups |\svn@glist| is initial set empty and will be
+% filled by \cs{svngroup}.
+% \begin{macrocode}
+\if@svnmulti@groups
+\let\svn@glist=\empty
+% \end{macrocode}
+
+% \begin{macro}{\svngroup}[1]{group name}
+% Saves the group to |\svn@g| and initiates |\svn@g@|\meta{group name}|@rev|
+% and |\@svn@g@|\meta{group name}|@rev| if this is the first time the group
+% got used.\par
+% The current group symbol `|*|' is invalid here because there is no way to
+% change to a current group.
+% \begin{macrocode}
+\def\svngroup#1{%
+ \svn@ifequal{#1}{*}%
+ {\PackageError{svn-multi}%
+ {The group name '*' is invalid for '\string\svngroup'}{}{}%
+ }{}%
+ \xdef\svn@g{#1}%
+ \let\svn@pg\svn@g
+ \ifx\svn@g\empty\else%
+% \end{macrocode}
+% Only initialise the group at first usage:
+% \begin{macrocode}
+ \expandafter
+ \ifx\csname @svng@\svn@g @rev\endcsname\relax%
+ \svn@initgroup{\svn@g}%
+% \end{macrocode}
+% Now save new group to list. The list is checked if its empty to avoid an
+% unwanted leading comma.
+% \begin{macrocode}
+ \ifx\svn@glist\empty
+ \xdef\svn@glist{#1}%
+ \else
+ \xdef\svn@glist{\svn@glist,#1}%
+ \fi
+ \fi
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\thesvngroup}
+% Returns the current group name to the user.
+% \begin{macrocode}
+\def\thesvngroup{\svn@g}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnsetcg}[1]{group name}
+% Defines |\svn@cg| to the given argument or to |\svn@g| if the argument was
+% `|*|'.
+% \begin{macrocode}
+\def\svnsetcg#1{%
+ \svn@ifequal{#1}{*}%
+ {\def\svn@cg{\svn@g}}%
+ {\def\svn@cg{#1}}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svncg@def}[1]{key name, \eg `rev', `date'}
+% Defines a |\svncgXXX| macro, \eg |svncgrev|, which returns the
+% requested keyword values of the current keyword group.
+% \begin{macrocode}
+\def\svncg@def#1{%
+ \expandafter
+ \def\csname svncg#1\endcsname{%
+ \@ifundefined{svng@\svn@cg @#1}{??}{%
+ \csname svng@\svn@cg @#1\endcsname}%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svncgrev}
+% \begin{macro}{\svncgdate}
+% \begin{macro}{\svncgauthor}
+% \begin{macro}{\svncgyear}
+% \begin{macro}{\svncgmonth}
+% \begin{macro}{\svncgday}
+% \begin{macro}{\svncghour}
+% \begin{macro}{\svncgminute}
+% \begin{macro}{\svncgsecond}
+% \begin{macro}{\svncgtimezonehour}
+% \begin{macro}{\svncgtimezoneminute}
+% \begin{macro}{\svncgurl}
+% \begin{macro}{\svncgfname}
+% Define all |\svncgXXX| macros by calling \cs{svncg@def} in a for loop.
+% \begin{macrocode}
+\@for\@tempa:=%
+ rev,author,date,year,month,day,hour,minute,second,%
+ timezonehour,timezoneminute,url,fname%
+\do{%
+ \expandafter\svncg@def\expandafter{\@tempa}%
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\thesvncg}
+% Simply return the internal macro.
+% \begin{macrocode}
+\def\thesvncg{\svn@cg}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svng}[2]{group name}{keyword name}
+% Simply returns |svng@#1@#2| if defined, '??' otherwise.
+% \begin{macrocode}
+\def\svng#1#2{%
+ \@ifundefined{svng@\svn@temp @#2}%
+ {??}%
+ {\csname svng@\svn@temp @#2\endcsname}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@addfiletogroup}[2]{file name}{group name}
+% Adds the given file to the given group. If the group list doesn't exist yet
+% it is initialised. A extra macro for each file is used to remember that the
+% file is already in the group. This could be avoided using a list search.\par
+% This is an internal macro so no `|*|' substitution for the group name.
+% \begin{macrocode}
+\def\svn@addfiletogroup#1#2{%
+ \expandafter
+ \ifx\csname @svng@#2@files@#1\endcsname\relax%
+ \expandafter\gdef\csname @svng@#2@files@#1\endcsname{1}%
+ %
+ \@ifundefined{@svng@#2@files}%
+ {\expandafter\xdef\csname @svng@#2@files\endcsname{#1}}%
+ {\expandafter\xdef\csname @svng@#2@files\endcsname{%
+ \csname @svng@#2@files\endcsname,#1%
+ }%
+ }%
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% The input files are added to the list of the current group at their begin to
+% have them before the included graphics and other external files.
+% Special care is taken to not re-initialise the main file which could happen in
+% some special cases (\eg |\lstinputlisting{\jobname .tex}|).
+% \begin{macrocode}
+\svnmulti@atbegininputfile{%
+ \svn@ifequal{\svn@filepath}{\svn@maindir\jobname.\svn@mainext}%
+ {}%
+ {\svn@initfile}%
+ \svn@ifequal{\svn@fileext}{\svn@mainext}%
+ {\svn@addfiletogroup{\svn@filedir\svn@filebase}{\svn@pg}}{}%
+ \svn@ifequal{\svn@fileext}{sty}%
+ {\svn@addfiletogroup{\svn@filedir\svn@filebase}{\svn@pg}}{}%
+ \svn@ifequal{\svn@fileext}{cls}%
+ {\svn@addfiletogroup{\svn@filedir\svn@filebase}{\svn@pg}}{}%
+ \svn@addfiletogroup{\svn@filepath}{\svn@filedir\svn@filebase}%
+}
+% \end{macrocode}
+
+% \begin{macro}{\svn@writegroup}[1]{group name}
+% Writes group to |\svn@write| file.
+% \begin{macrocode}
+\def\svn@writegroup#1{%
+ \def\svn@writekw##1{%
+ \immediate\write\svn@write{%
+ \noexpand\@namedef{svng@#1@##1}{\csname @svng@#1@##1\endcsname}%
+ }%
+ }%
+ \svn@writekw{rev}%
+ \svn@writekw{date}%
+ \svn@writekw{author}%
+ \svn@writekw{year}%
+ \svn@writekw{month}%
+ \svn@writekw{day}%
+ \svn@writekw{hour}%
+ \svn@writekw{minute}%
+ \svn@writekw{second}%
+ \svn@writekw{timezonehour}%
+ \svn@writekw{timezoneminute}%
+ \@ifundefined{@svng@#1@files}{}{%
+ \immediate\write\svn@write{%
+ \noexpand
+ \svn@namegdefverb{svng@#1@files}{\csname @svng@#1@files\endcsname}%
+ }%
+ }%
+ \immediate\write\svn@write{%
+ \noexpand
+ \svn@namegdefverb{svng@#1@url}{\csname @svng@#1@url\endcsname}^^J%
+ \noexpand
+ \svn@namegdefverb{svng@#1@fname}{\csname @svng@#1@fname\endcsname}^^J%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\svn@writeallgroups}[1]{macro holding a list of groups}
+% \begin{macrocode}
+\def\svn@writeallgroups#1{%
+ \begingroup
+ \ifx\relax#1\relax\else
+ \@for\svn@temp:=#1\do{%
+ \svn@ifvalidrev{@svng@\svn@temp @rev}%
+ {%
+ \expandafter
+ \svn@cleanfilelist\csname @svng@\svn@temp @files\endcsname
+ \svn@writegroup{\svn@temp}%
+ \@ifundefined{@svng@\svn@temp @files}{}%
+ {\expandafter\svn@writeallgroups
+ \csname @svng@\svn@temp @files\endcsname
+ }%
+ }{}%
+ }%
+ \fi
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@updategroup}[1]{group name}
+% Updates group with |\svnfile...| macro values.
+% \begin{macrocode}
+\def\svn@updategroup#1{%
+ \@ifundefined{@svng@#1@rev}%
+ {\svn@initgroup{#1}}%
+ {}%
+ \expandafter
+ \ifnum\csname @svng@#1@rev\endcsname<\svnfilerev
+ \svn@gkwset{#1}{rev}{\svnfilerev}%
+ \svn@gkwset{#1}{date}{\svnfiledate}%
+ \svn@gkwset{#1}{author}{\svnfileauthor}%
+ \svn@gkwset{#1}{year}{\svnfileyear}%
+ \svn@gkwset{#1}{month}{\svnfilemonth}%
+ \svn@gkwset{#1}{day}{\svnfileday}%
+ \svn@gkwset{#1}{hour}{\svnfilehour}%
+ \svn@gkwset{#1}{minute}{\svnfileminute}%
+ \svn@gkwset{#1}{second}{\svnfilesecond}%
+ \svn@gkwset{#1}{timezonehour}{\svnfiletimezonehour}%
+ \svn@gkwset{#1}{timezoneminute}{\svnfiletimezoneminute}%
+ \svn@gkwset{#1}{url}{\svnfileurl}%
+ \svn@gkwset{#1}{fname}{\svnfilefname}%
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@definegroup}[1]{group name}
+% Defines group value so that they are available for the user, e.g. instead of
+% the internal |@svng@...| macros it sets the |svng@...| macros.
+% This is done by calling \cs{svn@updategroup} with a modified version of
+% \cs{svn@gkwset}.
+% \begin{macrocode}
+\def\svn@definegroup#1{%
+ \svn@gkwdef{#1}{rev}%
+ \svn@gkwdef{#1}{date}%
+ \svn@gkwdef{#1}{author}%
+ \svn@gkwdef{#1}{year}%
+ \svn@gkwdef{#1}{month}%
+ \svn@gkwdef{#1}{day}%
+ \svn@gkwdef{#1}{hour}%
+ \svn@gkwdef{#1}{minute}%
+ \svn@gkwdef{#1}{second}%
+ \svn@gkwdef{#1}{timezonehour}%
+ \svn@gkwdef{#1}{timezoneminute}%
+ \svn@gkwdef{#1}{url}%
+ \svn@gkwdef{#1}{fname}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@initgroup}[1]{group name}
+% Initialises group.
+% \begin{macrocode}
+\def\svn@initgroup#1{%
+ \svn@gkwset{#1}{rev}{-1}%
+ \svn@gkwset{#1}{date}{}%
+ \svn@gkwset{#1}{author}{}%
+ \svn@gkwset{#1}{year}{0000}%
+ \svn@gkwset{#1}{month}{00}%
+ \svn@gkwset{#1}{day}{00}%
+ \svn@gkwset{#1}{hour}{00}%
+ \svn@gkwset{#1}{minute}{00}%
+ \svn@gkwset{#1}{second}{00}%
+ \svn@gkwset{#1}{timezonehour}{+00}%
+ \svn@gkwset{#1}{timezoneminute}{00}%
+ \svn@gkwset{#1}{url}{}%
+ \svn@gkwset{#1}{fname}{}%
+}
+% \end{macrocode}
+% \end{macro}
+
+
+% \begin{macro}{\svn@gkwset}[3]{group name}{keyword name}{value}
+% Sets \meta{value} for \meta{keyword} in \meta{group}.
+% \begin{macrocode}
+\def\svn@gkwset#1#2#3{%
+ \expandafter
+ \xdef\csname @svng@#1@#2\endcsname{#3}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@gkwdef}[2]{group name}{keyword name}
+% Defines |svng@...| macros used by the user macros to the value of the
+% internal |@svng@...| macros.
+% \begin{macrocode}
+\def\svn@gkwdef#1#2{%
+ \expandafter
+ \xdef\csname svng@#1@#2\endcsname{\csname @svng@#1@#2\endcsname}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@cleanfilelist}[1]{macro holing a file list}
+% Takes a macro which holds a file list and removes all files from the list
+% which don't have a valid revision number.
+% \begin{macrocode}
+\def\svn@cleanfilelist#1{
+ \begingroup
+ \def\svn@tmplist{}%
+ \ifx\relax#1\relax\else
+ \@for\svn@temp:=#1\do{%
+ \expandafter\svn@ifvalidrev
+ \expandafter{@svng@\svn@temp @rev}%
+ {\edef\svn@tmplist{\svn@tmplist,\svn@temp}}%
+ {}%
+ }%
+ \xdef#1{\expandafter\@gobble\svn@tmplist\empty}%
+ \fi
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+
+% \subsection{Files as extra groups}
+% Macros which allow single files to be declared as extra groups so that their
+% keywords can be accessed in the whole document like with normal groups.
+% This special groups are not added to the list of groups.
+
+% A user-level switch is declared to enable or disable the automatic declaration
+% of every file as own group. This causes \cs{svnsubgroup} to be called for
+% all input files.
+% The if macro is defined outside the |\if@svnmulti@subgroups| because
+% |\newif| inside |\if| is not a good idea.
+% \begin{macrocode}
+\newif\ifsvnsubgroups
+\svnsubgroupsfalse
+% \end{macrocode}
+
+% \begin{macrocode}
+\if@svnmulti@subgroups
+\svnsubgroupstrue
+% \end{macrocode}
+
+% \begin{macro}{\svnsubgroup}
+% User level and internal macro to declare the current file as extra group.
+% It produces the current file path and calls \cs{svn@subgroup}.
+% Creates two groups one with and one without the file extension. The one
+% without holds the latest revision of all files included in this file.
+% \begin{macrocode}
+\def\svnsubgroup{%
+ \begingroup
+ \svn@removedotslash\svn@filedir
+ \svn@subgroup{\svn@filedir\svn@filebase}%
+ \svn@subgroup{\svn@filepath}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@subgroup}[1]{file name}
+% Macro to write a file as group to |.svn| file. After checking if the filename
+% was not already written, the |.svn| file is checked if it is open and then the
+% file keyword information is written.
+% \begin{macrocode}
+\def\svn@subgroup#1{%
+ \ifnum\svnfilerev>-1\relax
+ \expandafter\ifx\csname svn@g@#1\endcsname\relax%
+ \expandafter\gdef\csname svn@g@#1\endcsname{1}%
+ \svn@updategroup{#1}%
+ \fi
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnignoreextensions}[1]{A comma separated list of file name
+% extensions (without leading dot) to ignore for automatic \csd{svnsubgroup}.}
+% A special macro is defined for all extensions. The existents of this macro is
+% then tested later to check if this extension should be ignored.
+% \begin{macrocode}
+\def\svnignoreextensions#1{%
+ \@for\svn@temp:=#1\do{%
+ \expandafter\def\csname svn@ignore@ext@\svn@temp\endcsname{}%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnconsiderextensions}[1]{A comma separated list of file name
+% extensions (without leading dot) to consider for automatic
+% \csd{svnsubgroup}.}
+% The special macro defined by \csi{svnignoreextentions} is deleted, i.e. |\let|
+% to |\relax|.
+% \begin{macrocode}
+\def\svnconsiderextensions#1{%
+ \@for\svn@temp:=#1\do{%
+ \expandafter\let\csname svn@ignore@ext@\svn@temp\endcsname\relax%
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+
+% The following extensions are ignored by default.
+% \begin{macrocode}
+\svnignoreextensions{aux,bbl,cfg,cls,fd,enc,fls,glo,idx,ilg,ind,ist,%
+lof,log,lot,out,sty,svn,svt,svx,toc}
+% \end{macrocode}
+
+% Check at the end of every input file if files should be extra groups and
+% declare this file as group if its extension is not configured to be ignored.
+% \begin{macrocode}
+\svnmulti@atendinputfile{%
+ \if@svnmulti@subgroups
+ \ifsvnsubgroups
+ \expandafter\ifx\csname svn@ignore@ext@\svn@fileext\endcsname\relax
+ \svnsubgroup
+ \fi
+ \fi
+ \fi
+}
+% \end{macrocode}
+
+% \begin{macrocode}
+\AtBeginDocument{%
+ \if@svnmulti@subgroups
+ \ifsvnsubgroups
+ \svn@addfiletogroup{\jobname .\svn@mainext}{\jobname}%
+ \svnsubgroup
+ \fi
+ \fi
+}
+% \end{macrocode}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+
+% \subsection{External Files}
+% Macros to declare external files and load the keywords from |.svx| files
+% generated by \scr{svn-multi.pl}.
+% \begin{macrocode}
+\if@svnmulti@external
+% \end{macrocode}
+
+% \begin{macro}{\svnexternalgroup}[1]{group name}
+% Defines the default group of external files. The default is to always use the
+% current group. An empty argument puts the external files in no group. A `|*|'
+% switches back to always use the current group.
+% \begin{macrocode}
+\if@svnmulti@groups
+\def\svnexternalgroup#1{%
+ \svn@ifequal{#1}{*}%
+ {\def\svn@externalgroup{#1}}%
+ {\def\svn@externalgroup{\svn@g}}%
+}
+\def\svn@externalgroup{\svn@g}
+\else
+\def\svn@externalgroup{}
+\fi
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnexternal}[2]{group name}{list of filenames in \texttt{\{ \}}}
+% Writes the current input file path and its argument as arguments of
+% \cs{@svnexternal} into the |.svn| file.
+% \begin{macrocode}
+\newcommand*\svnexternal[2][]{%
+ \if@filesw
+ \svn@checkwrite
+ \begingroup
+ \svn@ifequal{#1}{*}%
+ {\def\svn@temp{\svn@g}}%
+ {\svn@ifempty{#1}%
+ {\def\svn@temp{\svn@externalgroup}}%
+ {\def\svn@temp{#1}}%
+ }%
+ \immediate\write\svn@write{%
+ \noexpand\@svnexternal[\svn@temp]{\svn@filepath}{#2}%
+ }%
+ \endgroup
+ \fi
+ \svn@inputsvx{\svn@filedir\svn@filebase}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnexternalpath}[1]{list of paths in \texttt{\{ \}}}
+% Writes its argument as argument of \cs{@svnexternalpath} into the |.svn| file.
+% \begin{macrocode}
+\def\svnexternalpath#1{%
+ \if@filesw
+ \svn@checkwrite
+ \immediate\write\svn@write{%
+ \noexpand\@svnexternalpath{#1}%
+ }%
+ \fi
}
% \end{macrocode}
% \end{macro}
+
+% \begin{macro}{\@svnexternal}
+% \begin{macro}{\@svnexternalpath}
+% Discards the argument(s). These macros and their arguments are only used by
+% the external \scr{svn-multi.pl} script.
+% \begin{macrocode}
+\newcommand*\@svnexternal[3][]{}
+\def\@svnexternalpath#1{}
+% \end{macrocode}
+% \end{macro}
% \end{macro}
-% \begin{macro}{\svnnolinkurl}
-% This code is taken from the |hyperref| package and is the definition of
+
+% \begin{macro}{\svnexternalfile}
+% This macro is generated by \scr{svn-multi.pl} and should not be used by the
+% user. If files-as-group is enabled some special characters are disabled and
+% the \cs{svn@externalfile} is called to read the file name. Otherwise the
+% argument is simply removed.
+% \begin{macrocode}
+\newcommand*\svnexternalfile[1][\svn@filedir\svn@filebase]{%
+ \begingroup % TODO: maybe use \svn@catcodes
+ \catcode`\_=12
+ \catcode`\&=12
+ \catcode`\^=12
+ \catcode`\$=12
+ \catcode`\#=12
+ \svn@externalfile{#1}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@externalfile}[2]{group name}{file name}
+% Ends group which began in \cs{svnexternalfile} and calls the appropriate
+% macros.
+% \begin{macrocode}
+\def\svn@externalfile#1#2{%
+ \endgroup
+ \if@svnmulti@subgroups
+ \ifsvnsubgroups
+ \svn@ifequal{#1}{\svn@rg}%
+ {\svn@addfiletogroup{#2}{\svn@filedir\svn@filebase}}%
+ {\svn@addfiletogroup{#2}{#1}}%
+ \svn@subgroup{#2}%
+ \fi
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% If \op{external} option is not enabled a placeholder macro is defined which
+% simply ignores its argument.
+% \begin{macrocode}
+\else
+ \def\svnexternalfile#1{}%
+\fi
+% \end{macrocode}
+
+
+% \subsection{Auto loading of \texttt{.svx} files}
+% Auto loading of |.svx| files at the begin of |\input| or |\include| files
+% using the \cs{svnmulti@atbegininputfile} macro.
+% The macros \cs{svn@addfiletogroup} and \cs{svnsubgroup} are used to do the
+% actual work.
+% \begin{macrocode}
+\if@svnmulti@autoload
+
+\svnmulti@atbegininputfile{%
+ \svn@ifequal{\svn@fileext}{tex}%
+ {\svn@inputsvx{\svn@filedir\svn@filebase}}%
+ {}%
+}
+% \end{macrocode}
+
+% The main |.svx| is loaded at the end of the package.
+% \begin{macrocode}
+%%\AtEndOfPackage{%
+\AtBeginDocument{%
+ \svn@inputsvx{\jobname}%
+}
+% \end{macrocode}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+
+
+% \subsection{Support for Graphic Packages}
+
+% \subsubsection{Common Code}
+% \begin{macrocode}
+\if@svnmulti@anygraphic
+% \end{macrocode}
+
+% \begin{macro}{\svngraphicsgroup}[1]{graphic group name}
+% Defines the default group of graphics files. The default is empty which means
+% the current group.
+% \begin{macrocode}
+\def\svngraphicsgroup#1{%
+ \svn@ifequal{#1}{*}%
+ {\def\svn@graphicsgroup{\svn@g}}%
+ {\def\svn@graphicsgroup{#1}}%
+}
+\def\svn@graphicsgroup{\svn@externalgroup}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnignoregraphic}[1]{file name/path}
+% Ignores the given graphic file by defining a special macro.
+% \begin{macrocode}
+\def\svnignoregraphic#1{%
+ \expandafter\def\csname svn@ignoregraphic@#1\endcsname{}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnconsidergraphic}[1]{file name/path}
+% Deletes the special ignore macro to consider the graphic again.
+% \begin{macrocode}
+\def\svnconsidergraphic#1{%
+ \expandafter\let\csname svn@ignoregraphic@#1\endcsname\relax%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+
+% \subsubsection{Package \texttt{graphics}}
+% Automatic declaration of all images included by |\includegraphics| from the
+% \pkg{graphics} package as external files. We use the |\Gin@setfile| macro from
+% that package which receives the image file name as third argument.
+% \begin{macrocode}
+\if@svnmulti@graphics
+\RequirePackage{graphics}[2006/02/20]
+% \end{macrocode}
+
+% \begin{macro}{\Gin@setfile}[3]{??, not used}{??, not used}{graphic file
+% name/path}
+% \begin{macrocode}
+\message{Package svn-multi: patching macro '\string\Gin@setfile' from the
+'graphics' package!}%
+\let\svnmulti@Gin@setfile\Gin@setfile
+\renewcommand*{\Gin@setfile}[3]{%
+ \expandafter\ifx\csname svn@ignoregraphic@#3\endcsname\relax%
+ \svnexternal[\svn@graphicsgroup]{{#3}}%
+ \fi
+ \svnmulti@Gin@setfile{#1}{#2}{#3}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+
+% \subsubsection{Package \texttt{pgf}}
+% The \pkg{pgf} macro |\pgf@declareimage| which is called by the user macro
+% |\pgfdeclareimage| is used.
+% \begin{macrocode}
+\if@svnmulti@pgfimages
+\RequirePackage{pgf}[2008/01/15]
+% \end{macrocode}
+
+% \begin{macro}{\pgf@declareimage}[3]{??, not used}{image label}{??, not used}
+% \begin{macrocode}
+\message{Package svn-multi: patching macro '\string\pgf@declareimage' and will
+patch generated macros '\string\pgf@image@<name>!' from the 'pgf' package!}%
+\let\svnmulti@pgf@declareimage\pgf@declareimage
+\renewcommand*{\pgf@declareimage}[3][]{%
+ \svnmulti@pgf@declareimage[#1]{#2}{#3}%
+% \end{macrocode}
+% At this point the used image filename is defined by |\pgf@filename| and the
+% image itself is defined by |\pgf@image@#2!| which is a |\let| copy of
+% temporary |\pgf@image|. An own copy of this is created and the old name
+% |\pgf@image@#2!| is used to execute \cs{svnexternal} every time the image is
+% included using |\pgfuseimage|.
+% \begin{macrocode}
+ \ifx\pgf@filename\empty\else
+ \expandafter\ifx\csname svn@ignoregraphic@\pgf@filename\endcsname\relax%
+ \expandafter\global\expandafter%
+ \let\csname svnmulti@pgf@image@#2!\endcsname=\pgf@image%
+ \expandafter\xdef\csname pgf@image@#2!\endcsname{%
+ \noexpand\svnexternal[\noexpand\svn@graphicsgroup]{{\pgf@filename}}%
+ \csname svnmulti@pgf@image@#2!\endcsname
+ }%
+ \fi
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+%
+% \subsection{Table of Revisions}
+%
+% \begin{macrocode}
+\if@svnmulti@table
+\ifx\tableofcontents\relax\else
+% \end{macrocode}
+%
+% \begin{macro}{\svnrevisionsname}
+% Simple definition for now. Language support over `babel's |\languagename|
+% possible.
+% \begin{macrocode}
+\def\svnrevisionsname{Table of Revisions}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\svn@svt}
+% File ending for table of revision auxiliary file. A macro is used to allow
+% redefinition by the user if another package is uses the same ending.
+% \begin{macrocode}
+\def\svn@svt{svt}
+% \end{macrocode}
+% \end{macro}
+%
+
+% \begin{macro}{\tableofrevisions}
+% The |\tableofcontents| macro from standard \LaTeX\ is adapted for this macro.
+% Classes which provide chapters will get a different table then one which not.
+% \begin{macrocode}
+\AtBeginDocument{%
+\ifx\chapter\@undefined
+
+%% Adapted from the \tableofcontents macro, LaTeX `article' class [2005/09/16]
+\newcommand\tableofrevisions{%
+ \section*{\svnrevisionsname
+ \@mkboth{\MakeUppercase\svnrevisionsname}{\MakeUppercase\svnrevisionsname}}%
+ \svn@input{\jobname .\svn@svt}%
+}
+
+\else
+
+%% Adapted from the \tableofcontents macro, LaTeX `book' class [2005/09/16]
+\newcommand\tableofrevisions{%
+ \if@twocolumn
+ \@restonecoltrue\onecolumn
+ \else
+ \@restonecolfalse
+ \fi
+ \chapter*{\svnrevisionsname
+ \@mkboth{\MakeUppercase\svnrevisionsname}{\MakeUppercase\svnrevisionsname}}%
+ \svn@input{\jobname .\svn@svt}%
+ \if@restonecol\twocolumn\fi
+}
+
+\fi
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+\fi % defined \tableofcontents
+% \end{macrocode}
+
+% \begin{macro}{\svn@writerow}[3]{row type ('group', 'file', 'global', \ldots)}
+% {row type specific argument}{row type specific argument}
+% Writes a table row by using |\svn@tabcell| and |\svn@tabcellarg| defined by
+% the |\svn@writeXXXrow| macro below.
+% \begin{macrocode}
+\def\svn@writerow#1#2#3{%
+ \immediate\write\svn@svtwrite{%
+ \expandafter\noexpand\csname svn#1row\endcsname
+ \expandafter\noexpand\csname svntab#1\endcsname{#2}{#3}\space
+ \@ampersamchar\space
+ \svn@tabcell{rev}\space\@ampersamchar\space
+ \svn@tabcell{author}\space\@ampersamchar\space
+ \noexpand\svntabdate%
+ \svn@tabcellarg{year}%
+ \svn@tabcellarg{month}%
+ \svn@tabcellarg{day}%
+ \svn@tabcellarg{hour}%
+ \svn@tabcellarg{minute}%
+ \svn@tabcellarg{second}%
+ \svn@tabcellarg{timezonehour}%
+ \svn@tabcellarg{timezoneminute}%
+ \space\@backslashchar\@backslashchar
+ \expandafter\noexpand\csname endsvn#1row\endcsname
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@writegrouprow}[1]{current group}
+% \begin{macrocode}
+\def\svn@writegrouprow#1{%
+ \begingroup
+ \def\svn@tabcellarg##1{{\csname @svng@#1@##1\endcsname}}%
+ \def\svn@tabcell##1{\expandafter\noexpand\csname svntab##1\endcsname%
+ \svn@tabcellarg{##1}%
+ }%
+ \svn@writerow{group}{#1}{}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@writesubgrouprow}[2]{grouping level}{subgroup name}
+% \begin{macrocode}
+\def\svn@writesubgrouprow#1#2{%
+ \begingroup
+ \def\svn@tabcellarg##1{{\csname @svng@#2@##1\endcsname}}%
+ \def\svn@tabcell##1{\expandafter\noexpand\csname svntab##1\endcsname%
+ \svn@tabcellarg{##1}%
+ }%
+ \svn@writerow{subgroup}{#1}{#2}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@writefilerow}[2]{grouping level}{file name}
+% \begin{macrocode}
+\def\svn@writefilerow#1#2{%
+ \begingroup
+ \def\svn@tabcellarg##1{{\csname @svng@#2@##1\endcsname}}%
+ \def\svn@tabcell##1{\expandafter\noexpand\csname svntab##1\endcsname%
+ \svn@tabcellarg{##1}%
+ }%
+ \svn@writerow{file}{#1}{#2}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@writeglobalrow}
+% \begin{macrocode}
+\def\svn@writeglobalrow{%
+ \begingroup
+ \def\svn@tabcellarg##1{{\csname @svn@##1\endcsname}}%
+ \def\svn@tabcell##1{\expandafter\noexpand\csname svntab##1\endcsname%
+ \svn@tabcellarg{##1}%
+ }%
+ \svn@writerow{global}{}{}%
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+
+% \subsubsection{Table Format Macros}\label{sec:impl:table}
+% Generic format macro used in the |.svt| file. Can be redefined by the user to
+% change table format. % TODO: More documentation needed!
+%
+% \begin{macro}{\svntable}
+% \begin{macrocode}
+\def\svntable{%
+ \begin{tabular}{p{0.425\textwidth}rp{0.25\textwidth}p{0.225\textwidth}}%
+ \hline
+}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\endsvntable}
+% \begin{macrocode}
+\def\endsvntable{\hline\end{tabular}}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svntablehead}
+% \begin{macrocode}
+\def\svntablehead{%
+ Name & Rev & Last Author & Last Changed At \\\hline
+}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svntablefoot}
+% \begin{macrocode}
+\def\svntablefoot{}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnbeforetable}
+% \begin{macrocode}
+\def\svnbeforetable{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svnaftertable}
+% \begin{macrocode}
+\def\svnaftertable{\clearpage}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svnglobalrow}
+% \begin{macrocode}
+\def\svnglobalrow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\endsvnglobalrow}
+% \begin{macrocode}
+\def\endsvnglobalrow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svngrouprow}
+% \begin{macrocode}
+\def\svngrouprow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\endsvngrouprow}
+% \begin{macrocode}
+\def\endsvngrouprow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svnsubgrouprow}
+% \begin{macrocode}
+\def\svnsubgrouprow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\endsvnsubgrouprow}
+% \begin{macrocode}
+\def\endsvnsubgrouprow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svnsubgrouprow}
+% \begin{macrocode}
+\def\svnfilerow{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\endsvnfilerow}
+% \begin{macrocode}
+\def\endsvnfilerow{}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svntabglobal}
+% \begin{macrocode}
+\def\svntabglobal{Document}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svntabgroup}
+% \begin{macrocode}
+\def\svntabgroup#1{Group `#1'}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svntabfile}
+% \begin{macrocode}
+\def\svntabsubgroup#1{%
+ \raggedright
+ \addtolength{\leftskip}{#1\medskipamount}%
+ \begingroup
+ \catcode`\_=12
+ \catcode`\&=12
+ \catcode`\^=12
+ \catcode`\$=12
+ \catcode`\#=12
+ \svn@tabsubgroup
+}
+\def\svn@tabsubgroup#1{\endgroup Subgroup `\texttt{\small #1}'}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svntabfile}
+% \begin{macrocode}
+\def\svntabfile#1{%
+ \raggedright
+ \addtolength{\leftskip}{#1\medskipamount}%
+ \begingroup
+ \catcode`\_=12
+ \catcode`\&=12
+ \catcode`\^=12
+ \catcode`\$=12
+ \catcode`\#=12
+ \svn@tabfile
+}
+\def\svn@tabfile#1{\endgroup File `\texttt{\small #1}'}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svntabrev}
+% \begin{macrocode}
+\def\svntabrev{}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svntabauthor}
+% \begin{macrocode}
+\def\svntabauthor#1{\svnFullAuthor{#1}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\svntabdate}
+% \begin{macrocode}
+\def\svntabdate#1#2#3#4#5#6#7#8{%
+ #1-#2-#3 #4:#5:#6% #7#8%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macrocode}
+\fi
+% \end{macrocode}
+%
+
+% \subsection{Other macros}
+% This section contains macros which don't fit in any other section.
+%
+% \begin{macro}{\svn}
+% \begin{macro}{\svn*}
+% After *-testing, the intermediate macros |\svn@s| and |\svn@n| are called to
+% strip the |{ }| from |\svn|[|*|]|{$...$}| and to remove the |*|. Then the
+% actual macros are called to strip the dollars with or without the space
+% before the last dollar.
+% \changes{v1.2}{2007/06/22}{Added star version. Normal version was not
+% changed to not break existing documents with user defined keywords without
+% leading space.}
+% \begin{macrocode}
+\newcommand{\svn}{\@ifnextchar{*}{\svn@s}{\svn@n}}
+\def\svn@n#1{\@svn@n#1}
+\def\svn@s*#1{\@svn@s#1}
+\def\@svn@n$#1${#1}
+\def\@svn@s$#1 ${#1}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\svnnolinkurl}[1]{URL}
+% This code is taken from the \pkg{hyperref} package and is the definition of
% |\url| just without the part which creates the actual hyperlink. This needs
-% of course the |hyperref| package. A warning is given if it isn't loaded.
+% of course the \pkg{hyperref} package. A warning is given if it isn't loaded.
% \changes{v1.2}{2007/06/22}{New macro}
% \begin{macrocode}
- \DeclareRobustCommand*{\svnnolinkurl}{%
- \@ifundefined{hyper@normalise}
- {\PackageWarning{svn-multi}{Package hyperref is needed for \noexpand
- \svnnolinkurl.}}
- {\hyper@normalise\svnnolinkurl@}}%
- \def\svnnolinkurl@#1{\Hurl{#1}}
+%% Adapted from the \url macro of the `hyperref` package.
+\DeclareRobustCommand*{\svnnolinkurl}{%
+ \@ifundefined{hyper@normalise}%
+ {\PackageWarning{svn-multi}{Package hyperref is needed for \noexpand
+ \svnnolinkurl.}}%
+ {\hyper@normalise\svnnolinkurl@}%
+}%
+\def\svnnolinkurl@#1{\Hurl{#1}}%
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@getfilename}[1]{URL}
+% This macro expands the content using the temporary macro and sets it in front
+% of the \csi{svn@getfilename} sub-macro together with |/{}| to make sure the
+% macro does not break at values without directories. A |\relax| is used as
+% end marker.
+% \begin{macrocode}
+\def\svn@getfilename#1{%
+ \begingroup
+ \edef\svn@temp{#1}%
+ \expandafter\@svn@getfilename\svn@temp/{}\relax
+}%
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\@svn@getfilename}[2]{URL part before first slash}{URL part after
+% first slash}
+% Splits the content at the first slash (|/|) and checks if the remainder is
+% empty. If so the end marker got reached and the part before the slash is the
+% filename which is returned. Otherwise the macro recursively calls itself to
+% split the remainder.
+% \begin{macrocode}
+\def\@svn@getfilename#1/#2\relax{%
+ \svn@ifempty{#2}%
+ {\endgroup\gdef\svnfilefname{#1}}%
+ {\@svn@getfilename#2\relax}%
+}%
% \end{macrocode}
% \end{macro}
% \subsection{Auxiliary file generation and read-back}
-% At the end of document we write the values to an auxiliary file.
+%
+% Reread output from last compile run if it exists.
% \begin{macrocode}
-\AtEndDocument{%
+\@input{\jobname .svn}
+% \end{macrocode}
+
+% \begin{macro}{\svn@checkwrite}
+% Checks if .svn file is already open and if not opens it. This makes sure that
+% the file is only created if really needed. The macro is only needed once, so
+% it's redefines itself to |\relax| at the end.
+% \begin{macrocode}
+\def\svn@checkwrite{%
+ \@ifundefined{svn@write}{%
+ \newwrite\svn@write
+ \immediate\openout\svn@write=\jobname.svn\relax%
+ \immediate\write\svn@write{\@percentchar\space SVN Keyword cache}%
+ %\immediate\write\svn@write{\noexpand\makeatletter}%
+ }{}%
+ \let\svn@checkwrite=\relax
+}
% \end{macrocode}
-% We first check if we have something to save. Revision, date and author must be
-% non-empty. This suppresses the auxiliary file if the user doesn't use the
-% appropriate macros but other provided by this package.
-% \begin{macrocode}
- \if@filesw
- \ifx\@svn@rev\empty\else
- \ifnum\@svn@rev=0\else
- \ifx\@svn@date\empty\else
- \ifx\@svn@author\empty\else
-% \end{macrocode}
-% Open outfile to write project keywords.
-% \begin{macrocode}
- \newwrite\svn@write
- \immediate\openout\svn@write=\jobname.svn
- \immediate\write\svn@write{%
- \@percentchar\space SVN cache^^J%
- \noexpand\def\noexpand\svnrev{\@svn@rev}^^J%
- \noexpand\def\noexpand\svndate{\@svn@date}^^J%
- \noexpand\def\noexpand\svnauthor{\@svn@author}^^J%
- \noexpand\def\noexpand\svnyear{\@svn@year}^^J%
- \noexpand\def\noexpand\svnmonth{\@svn@month}^^J%
- \noexpand\def\noexpand\svnday{\@svn@day}^^J%
- \noexpand\def\noexpand\svnhour{\@svn@hour}^^J%
- \noexpand\def\noexpand\svnminute{\@svn@minute}^^J%
- \noexpand\def\noexpand\svnsecond{\@svn@second}^^J%
- \noexpand\def\noexpand\svntimezonehour{\@svn@timezonehour}^^J%
- \noexpand\def\noexpand\svntimezoneminute{\@svn@timezoneminute}^^J%
- }
- \immediate\closeout\svn@write%
- \fi\fi\fi\fi\fi%
+% \end{macro}
+%
+% \begin{macro}{\svn@writesvn}
+% This macro writes the |.svn| auxiliary file and is called from a
+% |\AtEndDocument| macro later on.
+% \begin{macrocode}
+{\catcode`\&=12
+\gdef\@ampersamchar{&}
}
+\def\svn@writesvn{%
+% \end{macrocode}
+% Remove all files which do not have a revision number from list:
+% \begin{macrocode}
+ \if@svnmulti@groups
+ \fi
+% \end{macrocode}
+% Write document global values:
+% \begin{macrocode}
+ \svn@checkwrite
+ \immediate\write\svn@write{^^J%
+ \@percentchar\space Global values:^^J%
+ \noexpand\def\noexpand\svnrev{\@svn@rev}^^J%
+ \noexpand\def\noexpand\svndate{\@svn@date}^^J%
+ \noexpand\def\noexpand\svnauthor{\@svn@author}^^J%
+ \noexpand\def\noexpand\svnyear{\@svn@year}^^J%
+ \noexpand\def\noexpand\svnmonth{\@svn@month}^^J%
+ \noexpand\def\noexpand\svnday{\@svn@day}^^J%
+ \noexpand\def\noexpand\svnhour{\@svn@hour}^^J%
+ \noexpand\def\noexpand\svnminute{\@svn@minute}^^J%
+ \noexpand\def\noexpand\svnsecond{\@svn@second}^^J%
+ \noexpand\def\noexpand\svntimezonehour{\@svn@timezonehour}^^J%
+ \noexpand\def\noexpand\svntimezoneminute{\@svn@timezoneminute}^^J%
+ \noexpand\svn@gdefverb\noexpand\svnurl{\@svn@url}^^J%
+ \noexpand\svn@gdefverb\noexpand\svnfname{\@svn@fname}^^J%
+ }%
+% \end{macrocode}
+% Write group keyword macro definitions.
+% Remove all files which do not have a revision number from list:
+% \begin{macrocode}
+ \if@svnmulti@groups
+ \svn@cleanfilelist\@svng@@files
+ \immediate\write\svn@write{%
+ \noexpand\def\noexpand\svng@@files{\@svng@@files}^^J%
+ }%
+ \svn@writeallgroups\@svng@@files
+% \end{macrocode}
+% Write keyword group values if groups were specified:
+% \begin{macrocode}
+ \ifx\svn@glist\empty\else
+ \begingroup
+ \immediate\write\svn@write{^^J%
+ \@percentchar\space SVN File Groups: \svn@glist
+ }%
+ \svn@writeallgroups\svn@glist
+ \endgroup
+ \fi
+ \else
+ \immediate\write\svn@write{^^J}%
+ \fi
+% \end{macrocode}
+% Finally close output file:
+% \begin{macrocode}
+ \immediate\closeout\svn@write%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\svn@writegroupfiles}[1]{group name}
+% Writes all files of a group to the |.svt| file. If the file is actually a
+% subgroup it calls itself recursively.
+% \begin{macrocode}
+\def\svn@writegroupfiles#1{%
+ \begingroup
+ \advance\svn@grouplevel by 1\relax
+ \expandafter\let
+ \expandafter\svn@files\csname @svng@#1@files\endcsname
+ \ifx\svn@files\relax\else
+ \svn@cleanfilelist\svn@files
+ \@for\svn@file:=\svn@files\do{%
+ \svn@ifvalidrev{@svng@\svn@file @rev}%
+ {%
+ \@ifundefined{@svng@\svn@file @files}%
+ {\svn@writefilerow{\the\svn@grouplevel}{\svn@file}}%
+ {\svn@ifequal{\csname @svng@\svn@file @files\endcsname}{\svn@file.tex}%
+ {\svn@writefilerow{\the\svn@grouplevel}{\svn@file.tex}}%
+ {%
+ \svn@writesubgrouprow{\the\svn@grouplevel}{\svn@file}%
+ \svn@writegroupfiles{\svn@file}%
+ }%
+ }%
+ }{}%
+ }%
+ \fi
+ \endgroup
+}%
% \end{macrocode}
-% Reread output from last compile run if it exists.
+% \end{macro}
+
+% \begin{macro}{\svn@writesvt}
+% This macro writes the |.svt| auxiliary file and is called from a
+% |\AtEndDocument| macro later on.
% \begin{macrocode}
-\InputIfFileExists{\jobname.svn}{}{}
+\def\svn@writesvt{%
% \end{macrocode}
+% Write table of revisions if enabled.
+% \begin{macrocode}
+ \if@svnmulti@table
+% \end{macrocode}
+% Open |.svt| file and write table header:
+% \begin{macrocode}
+ \newwrite\svn@svtwrite
+ \immediate\openout\svn@svtwrite=\jobname.\svn@svt\relax
+ \@onelevel@sanitize\svntable%
+ \immediate\write\svn@svtwrite{%
+ \noexpand\svnbeforetable^^J%
+ \svntable
+ \noexpand\svntablehead^^J%
+ }%
+% \end{macrocode}
+% Group rows:
+% \begin{macrocode}
+ \let\svn@grouplevel\@tempcnta
+ \svn@grouplevel=0\relax
+ \svn@writeglobalrow{}%
+ \svn@writegroupfiles{}%
+%
+ \@for\svn@g:=\svn@glist\do{%
+ \@ifundefined{@svng@\svn@g @rev}{}%
+ {%
+ \expandafter
+ \ifnum\csname @svng@\svn@g @rev\endcsname>0\relax
+ \svn@writegrouprow{\svn@g}%
+ \svn@writegroupfiles{\svn@g}%
+ \fi
+ }%
+ }%
+
+% \end{macrocode}
+% Write table footer and close file:
+% \begin{macrocode}
+ \@onelevel@sanitize\endsvntable%
+ \immediate\write\svn@svtwrite{%
+ \noexpand\svntablefoot^^J%
+ \endsvntable^^J%
+ \noexpand\svnaftertable
+ }%
+ \immediate\closeout\svn@svtwrite%
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% At the end of document the values are written to the auxiliary file.
+% \begin{macrocode}
+\AtEndDocument{%
+ \if@filesw
+ \ifx\@svn@rev\empty\else
+ \ifnum\@svn@rev<1\else
+ \svn@writesvn
+ \svn@writesvt
+ \fi
+ \fi
+ \fi
+}
+% \end{macrocode}
+%
+% \subsection{Backward compatibility wrapper \texttt{svnkw.sty}}
+% For backward compatibility a wrapper file with the old package name |svnkw| is
+% provided. Newer documents should use the name \svnmulti.
+% \setcounter{CodelineNo}{0}
+% \iffalse
+%</package>
+%<*wrapper>
+% \fi
+% \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{svnkw}
+[\filedate\space\fileversion\space Backward compatibility wrapper for svn-multi]
+\PackageWarning{svnkw}{The package 'svnkw' got renamed to 'svn-multi'
+and is now only a backward compatibility wrapper which loads 'svn-multi'.
+Please adjust your document preamble to use the new name.}
+\RequirePackage{svn-multi}[\filedate]
+% \end{macrocode}
+% \iffalse
+%</wrapper>
+% \fi
%
% \Finale
\endinput
-
diff --git a/Master/texmf-dist/source/latex/svn-multi/svn-multi.ins b/Master/texmf-dist/source/latex/svn-multi/svn-multi.ins
index e7b24f385de..9ae4d53330e 100644
--- a/Master/texmf-dist/source/latex/svn-multi/svn-multi.ins
+++ b/Master/texmf-dist/source/latex/svn-multi/svn-multi.ins
@@ -12,9 +12,11 @@
%%
%% The Current Maintainer of this work is Martin Scharrer.
%%
-%% This work consists of the files svn-multi.dtx and svn-multi.ins
-%% and the derived files svn-multi.sty and svnkw.sty.
-%% $Id: svn-multi.ins 146 2008-12-03 13:29:19Z martin $
+%% This work consists of the files svn-multi.dtx, svn-multi-pl.dtx, svn-multi.ins
+%% and the derived files svn-multi.sty, svnkw.sty and svn-multi.pl.
+%%
+%% $Id: svn-multi.ins 622 2009-03-23 12:27:16Z martin $
+
\input docstrip.tex
\keepsilent
@@ -25,7 +27,7 @@
This is a generated file.
-Copyright (C) 2006-2007 by Martin Scharrer <martin@scharrer-online.de>
+Copyright (C) 2006-2009 by Martin Scharrer <martin@scharrer-online.de>
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either version 1.3
@@ -39,26 +41,32 @@ This work has the LPPL maintenance status `maintained'.
The Current Maintainer of this work is Martin Scharrer.
-This work consists of the files svn-multi.dtx and svn-multi.ins
-and the derived files svn-multi.sty and svnkw.sty.
+This work consists of the files svn-multi.dtx, svn-multi-pl.dtx, svn-multi.ins
+and the derived files svn-multi.sty, svnkw.sty and svn-multi.pl.
\endpreamble
\generate{%
- %\file{svn-multi.drv}{\from{svn-multi.dtx}{driver}}
- \file{svn-multi.sty}{\from{svn-multi.dtx}{package}}
- \nopreamble \nopostamble
- \file{svnkw.sty}{\from{svn-multi.dtx}{wrapper}}
+ %\file{svn-multi.drv}{\from{svn-multi.dtx}{driver}}%
+ \file{svn-multi.sty}{\from{svn-multi.dtx}{package}}%
+ %\nopreamble \nopostamble
+ \file{svnkw.sty}{\from{svn-multi.dtx}{wrapper}}%
+ \nopreamble\nopostamble
+ \file{svn-multi.pl}{\from{svn-multi-pl.dtx}{script}}%
}
\obeyspaces
\Msg{*************************************************************}
\Msg{* *}
\Msg{* To finish the installation you have to move the following *}
-\Msg{* filesinto a directory searched by TeX: *}
+\Msg{* files into a directory searched by TeX: *}
\Msg{* *}
\Msg{* svn-multi.sty svnkw.sty *}
\Msg{* *}
+\Msg{* and copy the script 'svn-multi.pl' into a directory of *}
+\Msg{* your path and (on Unix like operation systems only) make *}
+\Msg{* it executable: chmod +x svn-multi.pl *}
+\Msg{* *}
\Msg{* To produce the documentation run the file svn-multi.dtx *}
\Msg{* through LaTeX. *}
\Msg{* *}
@@ -68,4 +76,4 @@ and the derived files svn-multi.sty and svnkw.sty.
\endbatchfile
-
+% vim: ft=tex
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 13:02:30 +0000