restore dingbat.mf from CTAN

git-svn-id: svn://tug.org/texlive/trunk@24093 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 0 insertions, 387 deletions

diff --git a/Master/texmf-dist/source/latex/dingbat/dingbat.dtx b/Master/texmf-dist/source/latex/dingbat/dingbat.dtx
deleted file mode 100644
index a30fb904004..00000000000
--- a/Master/texmf-dist/source/latex/dingbat/dingbat.dtx
+++ /dev/null
@@ -1,329 +0,0 @@
-% \iffalse meta-comment
-%
-% Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
-% -------------------------------------------------------
-%
-% This package may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.2
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-%    http://www.latex-project.org/lppl.txt
-% and version 1.2 or later is part of all distributions of LaTeX
-% version 1999/12/01 or later.
-%
-% \fi
-% \iffalse
-%% File: dingbat.dtx Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
-%
-%<package>\NeedsTeXFormat{LaTeX2e}
-%<package>\ProvidesPackage{dingbat}
-%<package>         [2001/04/27 v1.00 Hands and other dingbats]
-%<uarkfd>\ProvidesFile{uark.fd}
-%<uarkfd>          [2001/04/27 v1.00 Font definitions for the ark10 font]
-%<udingbatfd>\ProvidesFile{udingbat.fd}
-%<udingbatfd>      [2001/04/27 v1.00 Font definitions for the dingbat font]
-%
-%<*driver>
-\documentclass{ltxdoc}
-\usepackage{dingbat}
-\usepackage{tabularx}
-\EnableCrossrefs
-\CodelineIndex
-
-% Uncomment the following line if you don't want to include a
-% source-code listing.
-%\OnlyDescription
-
-\begin{document}
-\DocInput{dingbat.dtx}
-\end{document}
-%</driver>
-% \fi
-%
-% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% \CheckSum{76}
-% \GetFileInfo{dingbat.sty}
-%
-% \title{The \textsf{dingbat} package\thanks{This file
-%         has version number \fileversion, last
-%         revised \filedate.}}
-% \author{Scott Pakin\\pakin@uiuc.edu}
-% \date{\filedate}
-% \maketitle
-%
-% \changes{v1.00}{2001/04/27}{Initial version}
-%
-% \DoNotIndex{\newcommand,\selectfont}
-%
-% \StopEventually{^^A
-%   \section{Credits}
-%
-%   Just so it's clear who did what, here are the various components of
-%   the \textsf{dingbat} package and the associated copyright information:
-%
-%   \begin{center}
-%   \begin{tabularx}{0.9\textwidth}{lX}
-%     \texttt{ark10.mf} & Copyright (c) 1988 by Arthur M. Keller \\
-%     & The ARK font was initially done in MF79
-%       by Scott Kim.  It was converted to (new) MF by N.N. Billawala
-%       of Metamarks. \\
-%     \texttt{dingbat.dtx} & Copyright (C) 2001 Scott Pakin \\
-%     \texttt{dingbat.ins} & Copyright (C) 2001 Scott Pakin \\
-%     \texttt{dingbat.mf} & Created 3-3-89 by Doug Henderson \\
-%     \texttt{uark.fd} & Copyright (C) 2001 Scott Pakin
-%   \end{tabularx}
-%   \end{center}
-%
-%   \PrintIndex
-% }
-%
-% \begin{abstract}
-%   The \textsf{dingbat} package provides a \LaTeXe\ interface to the
-%   |ark10.mf| and |dingbat.mf| fonts.
-% \end{abstract}
-%
-%
-% \section{Usage}
-%
-% ^^A  Typeset a symbol in one column and its name in the next.
-% \def\tblsym#1{#1 & \texttt{\string#1}}
-%
-% \DescribeMacro{\rightpointright}
-% \DescribeMacro{\leftpointright}
-% \DescribeMacro{\leftthumbsdown}
-% \DescribeMacro{\leftthumbsup}
-% \DescribeMacro{\rightpointleft}
-% \DescribeMacro{\rightthumbsdown}
-% \DescribeMacro{\rightthumbsup}
-% The \textsf{dingbat} package defines the following hand gestures:
-%
-% \begin{center}
-% \renewcommand{\arraystretch}{1.2}
-% \begin{tabular}{lll}
-%   \tblsym{\rightpointright}  & Right hand pointing to the right \\
-%   \tblsym{\leftpointright}   & Left hand pointing to the right \\
-%   \tblsym{\leftthumbsdown}   & Left hand, thumbs down \\
-%   \tblsym{\leftthumbsup}     & Left hand, thumbs up \\
-%   \tblsym{\rightpointleft}   & Right hand pointing to the left \\
-%   \tblsym{\rightthumbsdown}  & Right hand, thumbs down \\
-%   \tblsym{\rightthumbsup}    & Right hand, thumbs up \\
-% \end{tabular}
-% \end{center}
-%
-% \noindent
-% (|\rightpointright| comes from |dingbat.mf|, while the rest come from
-% |ark10.mf|, hence, the discrepency in style.)
-%
-% \DescribeMacro{\squarewithdots}
-% \DescribeMacro{\filledsquarewithdots}
-% \DescribeMacro{\Sborder}
-% \DescribeMacro{\Zborder}
-% The following symbols are intended to be used to create fancy borders
-% around a box or the entire page.
-%
-% \begin{center}
-% \renewcommand{\arraystretch}{1.2}
-% \begin{tabular}{lll}
-%   \tblsym{\squarewithdots}       & Unfilled square with dots \\
-%   \tblsym{\filledsquarewithdots} & Filled square with dots \\
-%   \tblsym{\Sborder}              & \textit{S}-like border design \\
-%   \tblsym{\Zborder}              & \textit{Z}-like border design \\
-% \end{tabular}
-% \end{center}
-% 
-% \noindent
-% Note that if you \emph{are} going to create fancy borders, I recommend
-% using the \textsf{niceframe} package.  \textsf{niceframe} is geared
-% to drawing fancy borders and knows specifically about the border
-% characters in |dingbat.mf|.  The symbols defined by the
-% \textsf{dingbat} package, |\squarewithdots|, |\filledsquarewithdots|,
-% |\Sborder|, and |\Zborder|, are the only border characters that might
-% be useful outside of a border (e.g., in a straight line or as a bullet
-% in a fancy itemized list); the other, unnamed, characters defined in
-% |dingbat.mf| represent a frame's corners and sides.
-%
-% \DescribeMacro{\largepencil}
-% \DescribeMacro{\anchor}
-% \DescribeMacro{\carriagereturn}
-% \DescribeMacro{\checkmark}
-% \DescribeMacro{\eye}
-% \DescribeMacro{\satellitedish}
-% \DescribeMacro{\smallpencil}
-% The following \textsf{dingbat} symbols don't fit into either of the
-% previous categories:
-%
-% \begin{center}
-% \renewcommand{\arraystretch}{1.2}
-% \begin{tabular}{lll}
-%   \tblsym{\largepencil}    & Large pencil \\
-%   \tblsym{\anchor}         & Anchor \\
-%   \tblsym{\carriagereturn} & Carriage return \\
-%   \tblsym{\checkmark}      & Check mark \\
-%   \tblsym{\eye}            & Eye \\
-%   \tblsym{\satellitedish}  & DLA satellite dish \\
-%   \tblsym{\smallpencil}    & Small pencil \\
-% \end{tabular}
-% \end{center}
-%
-% For some of these symbols, most notably |\largepencil|, the font
-% metrics seem to be a bit off.  As a result, the symbols tend to jut
-% into previous or subsequent lines.
-%
-%
-% \section{Implementation}
-%
-% There's nothing particularly interesting about the implementation.
-% Section~\ref{sec:symbol-commands} defines the symbol commands that
-% make up |dingbat.sty|, and Section~\ref{sec:font-definitions} creates
-% the |uark.fd| and |udingbat.fd| font definition files, which \LaTeX\
-% loads when |dingbat.sty| selects font encoding~|U| and font family
-% |ark| or |dingbat|.
-%
-% \subsection{Symbol commands}
-% \label{sec:symbol-commands}
-%
-%    \begin{macrocode}
-%<*package>
-%    \end{macrocode}
-%
-% \begin{macro}{\arkfamily}
-% \begin{macro}{\ark@sym}
-% Define a macro, |\arkfamily|, which switches the font to |ark| and
-% another macro, |\ark@sym| which typesets a symbol in the |ark| font.
-%    \begin{macrocode}
-\newcommand{\arkfamily}{\fontencoding{U}\fontfamily{ark}\selectfont}
-\newcommand{\ark@sym}[1]{{\arkfamily\symbol{#1}}}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\carriagereturn}
-% \begin{macro}{\leftthumbsdown}
-% \begin{macro}{\eye}
-% \begin{macro}{\rightpointleft}
-% \begin{macro}{\smallpencil}
-% \begin{macro}{\leftpointright}
-% \begin{macro}{\leftthumbsup}
-% \begin{macro}{\largepencil}
-% \begin{macro}{\rightthumbsdown}
-% \begin{macro}{\rightthumbsup}
-% There are only ten symbols in the |ark| font.  We define names
-% individually for each of them.  Note that |\largepencil|'s bounding box
-% is a little too short, so |\largepencil| may jut into the previous line
-% of text.  I think some of the other bounding boxes may be the wrong
-% size, as well, but I haven't yet tested that carefully.
-%    \begin{macrocode}
-\newcommand{\carriagereturn}{\ark@sym{'103}}
-\newcommand{\leftthumbsdown}{\ark@sym{'104}}
-\newcommand{\eye}{\ark@sym{'105}}
-\newcommand{\rightpointleft}{\ark@sym{'114}}
-\newcommand{\smallpencil}{\ark@sym{'120}}
-\newcommand{\leftpointright}{\ark@sym{'122}}
-\newcommand{\leftthumbsup}{\ark@sym{'125}}
-\newcommand{\largepencil}{\ark@sym{'127}}
-\newcommand{\rightthumbsdown}{\ark@sym{'144}}
-\newcommand{\rightthumbsup}{\ark@sym{'165}}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\dingbatfamily}
-% \begin{macro}{\dingbat@sym}
-% Define a macro, |\dingbatfamily|, which switches the font to |dingbat|
-% and another macro, |\dingbat@sym| which typesets a symbol in the
-% |dingbat| font.
-%    \begin{macrocode}
-\newcommand{\dingbatfamily}{\fontencoding{U}\fontfamily{dingbat}\selectfont}
-\newcommand{\dingbat@sym}[1]{{\dingbatfamily\symbol{#1}}}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\checkmark}
-% \begin{macro}{\satellitedish}
-% \begin{macro}{\rightpointright}
-% \begin{macro}{\anchor}
-% The following are definitions for all the non-border characters in
-% |dingbat.mf|.
-%    \begin{macrocode}
-\newcommand{\checkmark}{\dingbat@sym{'104}}
-\newcommand{\satellitedish}{\dingbat@sym{'111}}
-\newcommand{\rightpointright}{\dingbat@sym{'116}}
-\newcommand{\anchor}{\dingbat@sym{'117}}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\squarewithdots}
-% \begin{macro}{\filledsquarewithdots}
-% \begin{macro}{\Sborder}
-% \begin{macro}{\Zborder}
-% The following are the border characters.  There are many more, but I
-% haven't yet made up \LaTeX\ names for them.
-%    \begin{macrocode}
-\newcommand{\squarewithdots}{\dingbat@sym{'102}}
-\newcommand{\filledsquarewithdots}{\dingbat@sym{'103}}
-\newcommand{\Sborder}{\dingbat@sym{'123}}
-\newcommand{\Zborder}{\dingbat@sym{'132}}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-%    \begin{macrocode}
-%</package>
-%    \end{macrocode}
-%
-% \subsection{Font definition files}
-% \label{sec:font-definitions}
-%
-% \subsubsection{\ttfamily uark.fd}
-%
-% All we do here is define |ark| as a symbol font (|U|~encoding) and tell
-% \LaTeX\ to scale |ark10.mf| to whatever font size is requested.
-%
-%    \begin{macrocode}
-%<*uarkfd>
-%    \end{macrocode}
-%
-%    \begin{macrocode}
-\DeclareFontFamily{U}{ark}{}
-\DeclareFontShape{U}{ark}{m}{n}{<-> ark10}{}
-%    \end{macrocode}
-%
-%    \begin{macrocode}
-%</uarkfd>
-%    \end{macrocode}
-%
-% \subsubsection{\ttfamily udingbat.fd}
-%
-% Similarly, we define |dingbat| as another, |U|-encoded symbol font and
-% instruct \LaTeX\ to scale |dingbat.mf| to whatever font size is requested.
-%
-%    \begin{macrocode}
-%<*udingbatfd>
-%    \end{macrocode}
-%
-%    \begin{macrocode}
-\DeclareFontFamily{U}{dingbat}{}
-\DeclareFontShape{U}{dingbat}{m}{n}{<-> dingbat}{}
-%    \end{macrocode}
-%
-%    \begin{macrocode}
-%</udingbatfd>
-%    \end{macrocode}
-%
-% \Finale
-%
diff --git a/Master/texmf-dist/source/latex/dingbat/dingbat.ins b/Master/texmf-dist/source/latex/dingbat/dingbat.ins
deleted file mode 100644
index c181a574212..00000000000
--- a/Master/texmf-dist/source/latex/dingbat/dingbat.ins
+++ /dev/null
@@ -1,58 +0,0 @@
-%%
-%% This file will generate fast loadable files and documentation
-%% driver files from the doc files in this package when run through
-%% LaTeX or TeX.
-%%
-%% Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
-%% -------------------------------------------------------
-%% 
-%% This package may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.2
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%    http://www.latex-project.org/lppl.txt
-%% and version 1.2 or later is part of all distributions of LaTeX 
-%% version 1999/12/01 or later.
-%%
-%% --------------- start of docstrip commands ------------------
-%%
-\input docstrip
-
-\keepsilent
-
-\usedir{tex/latex/dingbat}
-
-\preamble
-
-This is a generated file.
-
-Copyright (C) 2001 Scott Pakin <pakin@uiuc.edu>
--------------------------------------------------------
-
-This package may be distributed and/or modified under the
-conditions of the LaTeX Project Public License, either version 1.2
-of this license or (at your option) any later version.
-The latest version of this license is in
-   http://www.latex-project.org/lppl.txt
-and version 1.2 or later is part of all distributions of LaTeX 
-version 1999/12/01 or later.
-
-\endpreamble
-
-\generate{\file{dingbat.sty}{\from{dingbat.dtx}{package}}}
-\generate{\file{uark.fd}{\from{dingbat.dtx}{uarkfd}}}
-\generate{\file{udingbat.fd}{\from{dingbat.dtx}{udingbatfd}}}
-
-\Msg{***********************************************************}
-\Msg{*}
-\Msg{* To finish the installation, you have to move}
-\Msg{* dingbat.sty, uark.fd, ark10.mf, and dingbat.mf into}
-\Msg{* directories searched by TeX.}
-\Msg{*}
-\Msg{* To produce the documentation, run dingbat.dtx}
-\Msg{* through LaTeX.}
-\Msg{*}
-\Msg{* Happy TeXing!}
-\Msg{***********************************************************}
-
-\endbatchfile