diff options
author | Karl Berry <karl@freefriends.org> | 2023-11-01 20:13:49 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2023-11-01 20:13:49 +0000 |
commit | a776d572cfd8fa24365dbc0cc22bbd856fbbe97b (patch) | |
tree | 849f92803a749fc1bc8aecd7ba910bd723ec4095 /Master/texmf-dist/source/latex/tools | |
parent | d090e61f0bea55cb371aeb790140dbcb6c5d7d36 (diff) |
latex2e (1nov23)
git-svn-id: svn://tug.org/texlive/trunk@68720 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source/latex/tools')
-rw-r--r-- | Master/texmf-dist/source/latex/tools/afterpage.dtx | 12 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/array.dtx | 4 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/bm.dtx | 63 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/calc.dtx | 26 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/dcolumn.dtx | 22 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/enumerate.dtx | 10 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/ftnright.dtx | 18 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/indentfirst.dtx | 4 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/layout.dtx | 42 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/longtable.dtx | 36 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/shellesc.dtx | 18 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/showkeys.dtx | 20 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/tabularx.dtx | 38 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/theorem.dtx | 12 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/verbatim.dtx | 24 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/tools/xr.dtx | 4 |
16 files changed, 179 insertions, 174 deletions
diff --git a/Master/texmf-dist/source/latex/tools/afterpage.dtx b/Master/texmf-dist/source/latex/tools/afterpage.dtx index b94a85d26d9..518b70761d9 100644 --- a/Master/texmf-dist/source/latex/tools/afterpage.dtx +++ b/Master/texmf-dist/source/latex/tools/afterpage.dtx @@ -25,7 +25,7 @@ % %<package>\NeedsTeXFormat{LaTeX2e} %<package>\ProvidesPackage{afterpage} -%<package> [2014/10/28 v1.08 After-Page Package (DPC)] +%<package> [2023/07/04 v1.08 After-Page Package (DPC)] % %<*driver> \documentclass{ltxdoc} @@ -199,7 +199,7 @@ \global\setbox\@ne\lastbox}% % \end{macrocode} % If the text that is saved in |\AP@partial| had footnotes, we'd -% better grab them as well otherwise they may come out on a page +% better grab them as well, otherwise they may come out on a page % with the `afterpage' text, before the page that has the % footnote mark! (Added at v1.08.) % \begin{macrocode} @@ -218,7 +218,7 @@ % \end{macrocode} % % Restore the |\everydisplay| register. |\ignorespaces| prevents a space -% or newline after |$$| creating rogue a indentation or paragraph. +% or newline after |$$| creating a rogue indentation or paragraph. % \begin{macrocode} \def\AP@ed{\everydisplay\expandafter{\the\toks@}\ignorespaces} % \end{macrocode} @@ -264,7 +264,7 @@ % `afterpage' commands, so just add the new commands to the end of the % list. Otherwise save the commands in |\AP@|. (within a local group), % and switch the output routine. (The new output routine just calls the -% old one if it is invoked by a \LaTeX{} float. +% old one if it is invoked by a \LaTeX{} float.) % \begin{macrocode} \long\def\afterpage#1{% \ifx\AP@\relax @@ -291,7 +291,7 @@ \global\output\expandafter{\the\AP@output}% \AP@clearpage % \end{macrocode} -% At this point (since v1.08) Need to clear |\AP@| \emph{before} +% At this point (since v1.08) need to clear |\AP@| \emph{before} % using its expansion, as otherwise hit an infinite loop. Sigh. % \begin{macrocode} \global\expandafter\let\expandafter\AP@\expandafter\relax @@ -350,7 +350,7 @@ % \end{macrocode} % Subtract the new height of |#1| from |\skip@|, and add back on % |\splittopskip|, so |\skip@| is now the height of the first row of -% |#1| This may still be 0pt if (eg) a mark or whatsit is between the +% |#1|. This may still be 0pt if (eg) a mark or whatsit is between the % top glue and the first box. Save (this height${}-{}$|\splittopskip|) % in |\skip\tw@|. % \begin{macrocode} diff --git a/Master/texmf-dist/source/latex/tools/array.dtx b/Master/texmf-dist/source/latex/tools/array.dtx index 72e2f095e94..6e4e34ea260 100644 --- a/Master/texmf-dist/source/latex/tools/array.dtx +++ b/Master/texmf-dist/source/latex/tools/array.dtx @@ -33,7 +33,7 @@ %<+package>\DeclareCurrentRelease{}{2020-10-01} %<+package> %<+package>\ProvidesPackage{array} -%<+package> [2022/09/04 v2.5g Tabular extension package (FMi)] +%<+package> [2023/10/16 v2.5g Tabular extension package (FMi)] % % \fi % @@ -2272,7 +2272,7 @@ % insert the row strut now as it isn't inside the template (as that % got =\omit=ted). % \changes{v2.4h}{2018/04/30}{Fixing issue 42} - % \begin{macrocode} +% \begin{macrocode} \ifnum\@multicnt >\z@ \do@row@strut \fi \cr} \let\do@row@strut\relax diff --git a/Master/texmf-dist/source/latex/tools/bm.dtx b/Master/texmf-dist/source/latex/tools/bm.dtx index 51ae53f041a..a608c6aeb58 100644 --- a/Master/texmf-dist/source/latex/tools/bm.dtx +++ b/Master/texmf-dist/source/latex/tools/bm.dtx @@ -36,7 +36,7 @@ %<driver>\ProvidesFile{bm.drv} % \fi % \ProvidesFile{bm.dtx} - [2022/01/05 v1.2f Bold Symbol Support (DPC/FMi)] + [2023/07/08 v1.2f Bold Symbol Support (DPC/FMi)] % % \iffalse %<*driver> @@ -97,7 +97,7 @@ % % If there is a `heavy' math version defined (usually accessed by a % user-command |\heavymath|) then a similar command |\hm| -% is defined which access these `ultra bold' fonts. Currently this is +% is defined which accesses these `ultra bold' fonts. Currently this is % probably only useful with the `mathtime plus' font collection. % Definitions of commands that use these fonts may be made by % specifying the optional argument `heavy' to |\DeclareBoldMathCommand|. @@ -140,7 +140,7 @@ % your font set. % % \section{Features} -% In most cases this package should work in a fairly self explanatory +% In most cases this package should work in a fairly self-explanatory % way, but there are some things that might not be obvious. % % \subsection{Interaction with Math Alphabet Commands} @@ -209,7 +209,7 @@ % Normally if a command takes arguments the full command, including % any arguments, should be included in |\bm|. % -% So |\bm{\overbrace{abc}}| (producing \smash{$\bm{\overbrace{abc}}$}) +% So |\bm{\overbrace{abc}}| (producing \smash{$\bm{\overbrace{abc}}$}), % not % |\bm{\overbrace}{abc}|. If you do not include all the arguments you % will typically get the error message:\\ @@ -245,7 +245,7 @@ % allocations. % % If no bold font appears to be available for a particular symbol, -% |\bm| will use `poor man's bold' that is, overprinting the same +% |\bm| will use `poor man's bold', which will overprint the same % character in slightly offset % positions to give an appearance of boldness. % @@ -255,8 +255,8 @@ % font set there are suitable fonts for bold and heavy math setting, % and so |\bm| and |\hm| work well. Similarly in the basic Lucida % New Math font set there are no bold math fonts, so |\bm| will -% use `poor man's bold. However if the Lucida Expert set is used, -% Then |\bm| will detect, and use the bold math fonts that are +% use `poor man's bold'. However, if the Lucida Expert set is used, +% then |\bm| will detect, and use, the bold math fonts that are % available. % % As discussed above, one may set |\bmmax| higher or lower than its @@ -310,7 +310,7 @@ % ``poor man's bold''. That is, over-printing the character with slight offsets. % Since version 1.2e, the package now warns if a font is set up to use this over-printing and % the package option |nopbm| is available which prevents its use in which case |\bm| will -% use the non-bold for characters from the affected font, +% use the non-bold for characters from the affected font. % % \MaybeStop{} % @@ -339,7 +339,7 @@ % % \changes{v1.2e}{2021/04/25} % {Package options gh/71} -% Options to use or not use poor mans bold (over-printing) +% Options to use or not use poor man's bold (over-printing) % and level of warning messages. % \begin{macrocode} %<*package> @@ -399,7 +399,7 @@ % code, which is temporarily defined to |\bm|, to save wasting a csname. % Similarly |\bm@pmb|\ldots\ (which will be defined later) are used % as scratch macros. -% (This csname saving no longer used, setup command is |\bm@setup| not |\bm|). +% (This csname saving no longer used, setup command is |\bm@setup|, not |\bm|.) % % The general plan. Run through the fonts allocated to the normal math % version. Ignore \meta{math alphabet} allocations\footnote{For now?} @@ -505,11 +505,11 @@ \ifx\bm@pmb@\@firstofone\else, using \string\pmb\fi}% \else % \end{macrocode} -% Else make a new name by adjoining |#1| to the name of the symbol font +% Else make a new name by adjoining |#1| to the name of the symbol font, % eg, |\symboldsymbols| to match |\symsymbols|. If that font has already % been allocated, or if |\@tempcnta| is positive so we can allocate a % new slot for this font, then the table will be -% set with the offset between the two fonts. otherwise set the offset to +% set with the offset between the two fonts. Otherwise set the offset to % zero (so |\boldmath| will be used to access the font). % \begin{macrocode} \edef\@tempa{sym#1\expandafter\@gobblefour\string##1}% @@ -673,8 +673,8 @@ \fi % \end{macrocode} % -% If there is no bold math version, It is very easy to set up -% the table, no need to use all the tricky code above. +% If there is no bold math version, it is very easy to set up +% the table since there is no need to use all the tricky code above. % Also, at the end of the package redefine the internal macro % that |\bm| uses to call |\boldmath|, to use poor man's bold % instead. @@ -711,7 +711,7 @@ % % \begin{macro}{\hmmax} % -% Same for heavy (but default to three this time (enough for mathtime +% Same for heavy, but default to three this time (enough for mathtime % plus, as no heavy operators font). % \begin{macrocode} \ifx\hmmax\@undefined @@ -777,7 +777,7 @@ \let\protect\@empty \let\@typeset@protect\@empty % \end{macrocode} -% Set up either bold or heavy +% Set up either bold or heavy. % \begin{macrocode} \def\bm@mathchoice{\bm@m@thchoice#1}% \def\bm@group{\bm@gr@up#1}% @@ -848,9 +848,9 @@ \let\next@\copy \global\let\bm@first\@empty % \end{macrocode} -% For AMS version of |\sqrt|: don't expand just wrap in brace group -% so that it can be made bold in a safe but slow way. Do the same for -% internal accent command +% For AMS version of |\sqrt|: don't expand, just wrap it in a brace +% group so that it can be made bold in a safe but slow way. Do the same +% for internal accent command. % \changes{v1.1b}{2003/10/05}{AMS \cs{sqrt} not working} % % \changes{v1.1c}{2004/02/26}{\cs{accentV} made safe (pr/3625)} @@ -886,7 +886,7 @@ % |\mv@bold| or |\mv@heavy| and we execute that after redefining % |\install@mathalphabet| and |\getanddefine@fonts| suitably. % The definitions are reverted back to their original the moment -% the scanning is done +% the scanning is done. % \changes{v1.0h}{2002/11/22}{Get math alphabets right (pr/3476)} % \begin{macrocode} \let\install@mathalphabet\def @@ -972,7 +972,7 @@ % |\bm| is empty within the definition, so that either\\ % |\bmdefine\balpha{\bm\alpha}| or |\bmdefine\balpha{\alpha}| \\ % may be used. (The former just for compatibility with the original -% version for plain \TeX). +% version for plain \TeX.) % \begin{macrocode} \def\bmdefine{\DeclareBoldMathCommand[bold]} % \end{macrocode} @@ -1092,8 +1092,8 @@ % \begin{macro}{\bm@gr@up} % \changes{v1.0c}{1997/10/09} % {Extra brace around argument for \cs{over}} -% If faced with a group, -% If we are in math mode, stick it in a |\boldsymbol| like construct +% If faced with a group +% when we are in math mode, put it in a |\boldsymbol|-like construct % and then recurse on |\bm@expand|. % Otherwise just use |\bfseries\boldmath|. % The actual test is deferred till `run time'. @@ -1131,7 +1131,7 @@ % Other things just copy straight over to the command being built. % (Anything inside a |\mathop| or similar will end up being made bold % as the |\mathop| will be copied over, but its argument will be made -% bold by the group code above. +% bold by the group code above.) % \begin{macrocode} \def\bm@test@token#1{% \let\bm@next\@empty @@ -1139,7 +1139,7 @@ % % Stop here. Note that it is vital that the terminating token % is non-expandable and defined, rather than the usual \LaTeX\ -% terminators |\@nil| or |\@@|. (Worse still would be a `quark' +% terminators |\@nil| and |\@@|. (Worse still would be a `quark' % like |docstrip|'s |\qStop|.) % \begin{macrocode} \ifx#1\@@end @@ -1166,7 +1166,7 @@ \afterassignment\bm@radical\count@ % \end{macrocode} % -% Need to trap spaces otherwise digits will get turned to bold +% Need to trap spaces, otherwise digits will get turned to bold % mathchars. % \changes{v1.1a}{2003/09/01}{Forgotten to check for \cs{hskip} (pr/3572)} % \begin{macrocode} @@ -1451,7 +1451,7 @@ % \begin{macro}{\bm@pmb@} % \changes{v0.10}{1997/01/04} % {Macro added} -% |\pmb| variant. (See \TeX{}Book, or AMS \textsf{amsbsy} package). +% |\pmb| variant. (See \TeX{}book, or AMS \textsf{amsbsy} package.) % This one takes a bit more care to use smaller offsets in subscripts. % \begin{macrocode} \ifx\bm@pmb@\@firstofone\else @@ -1544,7 +1544,7 @@ \def\bm@mathaccent{% \bm@changefam{}% % \end{macrocode} -% The next four lines were added a v1.0e. Without them |\bm{\hat{A}}| +% The next four lines were added in v1.0e. Without them |\bm{\hat{A}}| % makes the accent bold using |\bm| but the group |{A}| is made bold % via a |\mathchoice| construction as for any other group, as |\bm| % does not attempt to parse inside brace groups. While that produces @@ -1674,9 +1674,10 @@ % \begin{macro}{\bm@changefam} % \changes{v0.10}{1997/01/04} % {Rewrite for new \cs{bm@table} system} -% Pull out one specified hex digit and passes -% it to |\bm@modify| to change. argument is empty normally but |000| to -% access the second math group in a delimiter code. +% Pull out one specified hex digit and pass +% it to |\bm@modify| to change. Its one argument is normally empty, +% but it will be |000| when necessary to access the second math group +% in a delimiter code. % \begin{macrocode} \def\bm@changefam#1{% \@tempcnta\count@ diff --git a/Master/texmf-dist/source/latex/tools/calc.dtx b/Master/texmf-dist/source/latex/tools/calc.dtx index c243eed8d32..2c4cecbf038 100644 --- a/Master/texmf-dist/source/latex/tools/calc.dtx +++ b/Master/texmf-dist/source/latex/tools/calc.dtx @@ -40,7 +40,7 @@ %<driver> \ProvidesFile{calc.drv} % \fi % \ProvidesFile{calc.dtx} - [2017/05/25 v4.3 Infix arithmetic (KKT,FJ)] + [2023/07/08 v4.3 Infix arithmetic (KKT,FJ)] % % \iffalse %<*driver> @@ -102,7 +102,7 @@ % Arithmetic in \TeX\ is done using low-level operations such as % |\advance| and |\multiply|. This may be acceptable when developing % a macro package, but it is not an acceptable interface for the -% end-user. +% end user. % % This package introduces proper infix notation arithmetic which is % much more familiar to most people. The infix notation is more @@ -271,7 +271,7 @@ % or at the end of the expression being evaluated. % % When \TeX\ performs arithmetic on integers, any fractional part of -% the results are discarded. For example, +% the result is discarded. For example, %\begin{verbatim} % \setcounter{x}{7/2} % \setcounter{y}{3*\real{1.6}} @@ -318,7 +318,7 @@ % \setlength{\parindent}{% % \minof{3pt}{\parskip}*\real{1.5}*\maxof{2*\real{1.6}}{2-1}} %\end{verbatim} -% will assign $\min(13.5\textrm{pt},4.5\cs{parskip})$ to \cs{parindent} +% will assign $\min(13.5\textrm{pt},4.5\cs{parskip})$ to \cs{parindent}. % % % @@ -453,7 +453,7 @@ % or a parenthesized expression~$(E')$. % % Since the \TeX\ engine can only execute arithmetic operations in a -% machine-code like manner, we have to find a way to translate the +% machine-code-like manner, we have to find a way to translate the % infix notation into this `instruction set'. % % Our goal is to design a translation scheme that translates~$X$ (an @@ -565,9 +565,9 @@ % When an \<integer factor> is expected, we must change $A$ and~$B$ to % refer to integer type registers. We can accomplish this by % including instructions to change the type of $A$ and~$B$ to integer -% type as part of the replacement code for~`$*$; if we append such +% type as part of the replacement code for~`$*$'; if we append such % instructions to the replacement code described above, we also ensure -% that the type-change is local (provided that the type-changing +% that the type change is local (provided that the type-changing % instructions only have local effect). However, note that the % instance of~$A$ referred to in $\savecode{B\lassign B*A}$ is the % integer instance of~$A$. @@ -933,7 +933,7 @@ % \begin{macro}{\calc@addAtoB} % \begin{macro}{\calc@subtractAfromB} % The replacement code for the binary operators `\texttt{+}' and -% `\texttt{-}' follow a common pattern; the only difference is the +% `\texttt{-}' follows a common pattern; the only difference is the % token that is stored away by |\aftergroup|. After this replacement % code, control is transferred to |\calc@pre@scan|. % \begin{macrocode} @@ -1063,7 +1063,7 @@ % \begin{macro}{\calc@ratio@multiply} % \begin{macro}{\calc@ratio@divide} % When |\calc@post@scan| encounters a |\ratio| control sequence, it hands -% control to one of the macros |\calc@ratio@multiply| or |\calc@ratio@divide|, +% control to one of the macros |\calc@ratio@multiply| and |\calc@ratio@divide|, % depending on the preceding character. Those macros both forward the % control to the macro |\calc@ratio@evaluate|, which performs two steps: (1) it % calculates the ratio, which is saved in the global macro token @@ -1109,7 +1109,7 @@ % Here we calculate the ratio. First, we check for negative numerator % and/or denominator; note that \TeX\ interprets two minus signs the % same as a plus sign. Then, we calculate the integer part. -% The minus sign(s), the integer part, and a decimal point, form the +% The minus sign(s), the integer part, and a decimal point form the % initial expansion of the |\calc@the@ratio| macro. % \begin{macrocode} \gdef\calc@the@ratio{}% @@ -1305,8 +1305,8 @@ % {Use \cs{PackageError} for error messages (DPC)} % \changes{v4.0e}{1997/11/11} % {typo fixed} -% If |\calc@post@scan| reads a character that is not one of `\texttt{+}', -% `\texttt{-}', `\texttt{*}', `\texttt{/}', or `\texttt{)}', an error +% If |\calc@post@scan| reads a character that is neither `\texttt{+}', +% `\texttt{-}', `\texttt{*}', `\texttt{/}', nor `\texttt{)}', an error % has occurred, and this is reported to the user. Violations in the % syntax of \<numeric>s will be detected and reported by \TeX. % \changes{v4.1a}{1998/06/07} @@ -1327,7 +1327,7 @@ % \changes{v4.2}{2005/08/06} % {Added macro} % The kernel macro \cs{@settodim} is changed so that it runs through a list -% containing \cs{ht}, \cs{wd}, and \cs{dp} and than advance the length +% containing \cs{ht}, \cs{wd}, and \cs{dp} and then advances the length % one step at a time. We just have to use a scratch register in case the % user decides to put in a \cs{global} prefix on the length register. % A search on the internet confirmed that some people do that kind of thing. diff --git a/Master/texmf-dist/source/latex/tools/dcolumn.dtx b/Master/texmf-dist/source/latex/tools/dcolumn.dtx index cfb7b4d33e8..c8ddaf4ce6b 100644 --- a/Master/texmf-dist/source/latex/tools/dcolumn.dtx +++ b/Master/texmf-dist/source/latex/tools/dcolumn.dtx @@ -31,7 +31,7 @@ %<driver>\ProvidesFile{dcolumn.drv} % \fi % \ProvidesFile{dcolumn.dtx} - [2014/10/28 v1.06 decimal alignment package (DPC)] + [2023/07/08 v1.06 decimal alignment package (DPC)] % % \iffalse %<*driver> @@ -117,7 +117,7 @@ % % \noindent"\newcolumntype{,}{D{,}{,}{2}}" % -% {\tt ,} specifies takes a column of entries with at most two decimal +% {\tt ,} specifies a column of entries with at most two decimal % places after a~$,$. % % \newcolumntype{d}[1]{D{.}{\cdot}{#1}} @@ -138,7 +138,7 @@ % \end{center} % % Note that the first column, which had a negative \meta{decimal places} -% argument is wider than the second column, so that the decimal point +% argument, is wider than the second column, so that the decimal point % appears in the middle of the column. % Also note that this package deals correctly with entries with no % decimal part, no integer part, and blank entries. @@ -200,7 +200,7 @@ %<*package> % \end{macrocode} % -% First we load {\tt array.sty} if it not already loaded. +% First we load {\tt array.sty} if it is not already loaded. % \begin{macrocode} \RequirePackage{array} % \end{macrocode} @@ -243,10 +243,10 @@ % \begin{macro}{\DC@x} % \changes{v1.03}{1996/02/28}{Macro added} % If "\count@" is negative, centre on the decimal point. If it is -% positive either "#1" will be empty in which case bad out decimal +% positive either "#1" will be empty in which case pad out decimal % part to the number of digits specified by "\count@" or (new feature % in v1.03) it is none empty in which case "\count@" contains the -% number of digits to the left of the point, and "#1" contains a junk +% number of digits to the left of the point and "#1" contains a junk % token (probably ".") followed by the number of digits to the right % of the point. In either of these latter cases, "\DC@right" is used. % \begin{macrocode} @@ -261,7 +261,7 @@ % \end{macro} % % \begin{macro}{\DC@centre} -% If centering on the decimal point, just need to box up the two halves. +% If centering on the decimal point, just need to box up the two halves: % \begin{macrocode} \def\DC@centre#1#2#3{% \let\DC@end\DC@endcentre @@ -293,16 +293,16 @@ \ifx\relax#3\relax % \end{macrocode} % If "#3" is empty, add "\hfill" to right align the column, and -% Just set "\DC@rl" to begin a group, so nothing fancy is done with +% just set "\DC@rl" to begin a group, so that nothing fancy is done with % the whole number part. % \begin{macrocode} \hfill \let\DC@rl\bgroup \else % \end{macrocode} -% Otherwise set "\DC@rl" so that the whole number part is put in a +% Otherwise set "\DC@rl" so that the whole number part is put in a % box "\count@" times as wide as a digit. -% In order to share code with the other branch, then move "#3" (the +% In order to share code with the other branch, move "#3" (the % number of decimal places) into "\count@" throwing away the `.' from % the user syntax. % \changes{v1.04}{1996/09/23}{Add \cs{hfill} so integer part @@ -318,7 +318,7 @@ % \end{macrocode} % Box 2 contains the decimal part, set to "\dimen@" which is % calculated below to be "\count@" times the width of a digit, plus -% the with of the `decimal point'. +% the width of the `decimal point'. % \begin{macrocode} \uppercase{\def~}{$\egroup\setbox\tw@\hbox to\dimen@\bgroup${#2}}% \setbox\z@\hbox{$1$}\dimen@ii\wd\z@ diff --git a/Master/texmf-dist/source/latex/tools/enumerate.dtx b/Master/texmf-dist/source/latex/tools/enumerate.dtx index 49179cfa067..2818a73a09b 100644 --- a/Master/texmf-dist/source/latex/tools/enumerate.dtx +++ b/Master/texmf-dist/source/latex/tools/enumerate.dtx @@ -31,7 +31,7 @@ %<driver> \ProvidesFile{enumerate.drv} % \fi % \ProvidesFile{enumerate.dtx} - [2015/07/23 v3.00 enumerate extensions (DPC)] + [2023/07/04 v3.00 enumerate extensions (DPC)] % % \iffalse %<*driver> @@ -66,7 +66,7 @@ % This package gives the enumerate environment an optional argument % which determines the style in which the counter is printed. % -% An occurrence of one of the tokens |A a I i| or |1| produces the value +% An occurrence of one of the tokens |A a I i 1| produces the value % of the counter printed with (respectively) |\Alph \alph \Roman \roman| % or |\arabic|. % @@ -233,7 +233,7 @@ % % To enable a new counter type based on a letter, you just need % to add a new |\ifx| clause by analogy with the code above. -% So for example to make |*| trigger footnote symbol counting. +% So for example to make |*| trigger footnote symbol counting, % a package should do the following. % % Initialise the hook, in case the package is loaded before @@ -255,7 +255,7 @@ % in this way. % % At this point we just need initialise the hook, taking care not -% to over write any definitions another package may already have added. +% to overwrite any definitions another package may already have added. % \begin{macrocode} \providecommand\@enhook{} % \end{macrocode} @@ -276,7 +276,7 @@ % \end{macro} % % \begin{macro}{\@@enum@} -% Handle the optional argument.. +% Handle the optional argument. % \begin{macrocode} \def\@@enum@[#1]{% % \end{macrocode} diff --git a/Master/texmf-dist/source/latex/tools/ftnright.dtx b/Master/texmf-dist/source/latex/tools/ftnright.dtx index 00e98c3f773..663fa304a94 100644 --- a/Master/texmf-dist/source/latex/tools/ftnright.dtx +++ b/Master/texmf-dist/source/latex/tools/ftnright.dtx @@ -26,7 +26,7 @@ %% Copyright (C) 1989-2004 Frank Mittelbach, all rights reserved. %<+package>\NeedsTeXFormat{LaTeX2e}[1995/06/01] %<+package>\ProvidesPackage{ftnright} -%<+package> [2014/10/28 v1.1f footnote layout package (FMi)] +%<+package> [2023/07/08 v1.1f footnote layout package (FMi)] % % \fi %% @@ -171,7 +171,7 @@ % % I also upgraded the documentation to conform to the \LaTeXe{} % terminology, e.g., this is a package since document classes will not -% know about it. However it is very likely that i have missed some +% know about it. However it is very likely that I have missed some % necessary corrections. % % \section{Introduction} @@ -220,7 +220,7 @@ % % The result of this effort is presented in this paper and the reader % can judge for himself whether it was successful or -% not.\footnote{Please note, that this option only changed the +% not.\footnote{Please note that this option changed only the % placement of footnotes. Since this article also makes use of the % {\tt doc} package \cite{bk:GMS94}, that assigns tiny numbers to % code lines sprinkled throughout the text, the resulting design is @@ -235,7 +235,7 @@ % footnote separator rule which is used in most publications prepared % with \TeX{}.\footnote{People who prefer the rule can add it by % redefining the command {\tt\bslash footnoterule} -% \cite[p.~156]{book:LLa86}. Please, note, that this command should +% \cite[p.~156]{book:LLa86}. Please note that this command should % occupy no space, so that a negative space should be used to % compensate for the width of the rule used.} Furthermore, I decided % to place the footnote markers\footnote{\label{thisftn}The tiny @@ -572,7 +572,7 @@ % are only partly typeset on the preceding page are not resolved. % They are held over until \LaTeX{} starts a page (or column) % containing text besides floats again. For our current layout, -% this would mean, that if \LaTeX{} decided to make the right +% this would mean that if \LaTeX{} decided to make the right % column of a page a float column, footnotes from the left column % would appear on a later page. A real cure for this problem would % be to rewrite two-thirds of \LaTeX{}'s output routine, so I am @@ -615,8 +615,8 @@ % footnotes from the left column. So we have to change the output % routine at least in the part that contributes floats to the next % column. The macro involved is called |\@startcolumn|. The first -% thing we do is to check and see whether any deferred floats -% exists. +% thing we do is to check and see whether there are any deferred +% floats. % \begin{macrocode} \def\@startcolumn{% \ifx\@deferlist\@empty @@ -764,7 +764,7 @@ % and output the footnotes on a separate page in an % emergency.\footnote{Otherwise, the footnotes are held over for % ever, preventing \TeX{} from finishing the document successfully. -% Instead, \TeX{} will produce infinity many empty pages at the end +% Instead, \TeX{} will produce infinitely many empty pages at the end % of the document, trying in vain to output the held over % footnotes. This problem was found by Rainer Sch\"opf when we % prepared the paper for the Cork conference.} @@ -790,7 +790,7 @@ % moment we simply detect it here, perhaps some better scheme can be % implemented. One way to avoid this is to allow more than |\textheight| of % footnotes in |\preparefootins|. However, that isn't such a good idea -% either as that means that a footnote from column one, might end up +% either since it means that a footnote from column one might end up % completely on a later page. % \changes{v1.1f}{2010/02/25}{Check for split footnotes (pr/4099)} % \begin{macrocode} diff --git a/Master/texmf-dist/source/latex/tools/indentfirst.dtx b/Master/texmf-dist/source/latex/tools/indentfirst.dtx index 295b678fd86..2314db1c70c 100644 --- a/Master/texmf-dist/source/latex/tools/indentfirst.dtx +++ b/Master/texmf-dist/source/latex/tools/indentfirst.dtx @@ -25,7 +25,7 @@ % %<package>\NeedsTeXFormat{LaTeX2e} %<package>\ProvidesPackage{indentfirst} -%<package> [1995/11/23 v1.03 Indent first paragraph (DPC)] +%<package> [2023/07/02 v1.03 Indent first paragraph (DPC)] % %<*driver> \documentclass{ltxdoc} @@ -52,7 +52,7 @@ % \changes{v1.03}{1995/11/23}{Typo fixes in documentation} % % \begin{abstract} -% Make the first line of all sections etc., be indented by the usual +% Make the first line of all sections etc. be indented by the usual % paragraph indentation. This should work with all the standard document % classes. % \end{abstract} diff --git a/Master/texmf-dist/source/latex/tools/layout.dtx b/Master/texmf-dist/source/latex/tools/layout.dtx index fffa6d8e189..2798bd4f60d 100644 --- a/Master/texmf-dist/source/latex/tools/layout.dtx +++ b/Master/texmf-dist/source/latex/tools/layout.dtx @@ -30,7 +30,7 @@ %<+package>\ProvidesPackage{layout} %<+driver>\ProvidesFile{layout.drv} %\ProvidesFile{layout.dtx} - [2021-03-10 v1.2e Show layout parameters] + [2023-08-20 v1.2e Show layout parameters] % % A short driver is provided that can be extracted if necessary by % the \textsf{DocStrip} program provided with \LaTeXe. @@ -409,7 +409,7 @@ % % \begin{macro}{\cnt@paperwidth} % \begin{macro}{\cnt@paperheight} -% The dimensions of the paper +% The dimensions of the paper, % \begin{macrocode} \newcount\cnt@paperwidth \newcount\cnt@paperheight @@ -514,7 +514,7 @@ \newcount\ref@hoffset \newcount\ref@voffset % \end{macrocode} -% The |\hoffset| and |\voffset| values are added to the default +% the |\hoffset| and |\voffset| values are added to the default % offset of one inch. % \begin{macrocode} \ref@hoffset=\cnt@hoffset \advance\cnt@hoffset by \oneinch @@ -531,7 +531,7 @@ % \end{macro} % % \begin{macro}{\ref@head} -% and the text areas, running heads, +% And the text areas, running heads, % \begin{macrocode} \newcount\ref@head % \end{macrocode} @@ -566,7 +566,7 @@ % \end{macro} % % The following are a number of scratch registers, used in the -% positioning of the various pices of the picture. +% positioning of the various pieces of the picture. % \begin{macrocode} \newcount\Interval \newcount\ExtraYPos @@ -639,7 +639,7 @@ \ifodd\count\z@ % \end{macrocode} % -% Here we deal with an odd page in the twosided case. +% Here we deal with an odd page in the two-sided case. % % \begin{macrocode} \typeout{Two-sided document style, odd page.} @@ -667,7 +667,7 @@ \else % \end{macrocode} % -% Here we deal with an even page in the twosided case. +% Here we deal with an even page in the two-sided case. % % \begin{macrocode} \typeout{Two-sided document style, even page.} @@ -696,7 +696,7 @@ \else % \end{macrocode} % -% Finally we the case for single sided printing. +% Finally we deal with the case for single-sided printing. % % \changes{v1.1}{1994/02/23}{Added check for reversemargin} % \begin{macrocode} @@ -718,7 +718,7 @@ % % % Now we begin the picture environment; dividing all the lengths by -% two is done by setting |\unitlength| to \texttt{0.5pt} +% two is done by setting |\unitlength| to \texttt{0.5pt}. % \begin{macrocode} \setlength{\unitlength}{.5pt} \begin{picture}(\cnt@paperwidth,\cnt@paperheight) @@ -790,7 +790,7 @@ \InsideHArrow\cnt@textwidth % \end{macrocode} % -% Now the |\textheight| +% Now the |\textheight|. % \begin{macrocode} \SetToHalf\PositionY\cnt@textheight \advance\PositionY by \ref@body @@ -812,7 +812,7 @@ % \end{macrocode} % % -% The |\hoffset|, +% The |\hoffset|. % \changes{v1.2}{1998/04/13}{\cs{PositionY} for label 1 is % fixed at 50} % \begin{macrocode} @@ -840,12 +840,12 @@ \Identify{3} % \end{macrocode} % -% the |\marginparwidth|, +% The |\marginparwidth|. % \begin{macrocode} \SetToQuart\PositionY\cnt@textheight \advance\PositionY by \ref@body % \end{macrocode} -% This arrow has to be bit below the one for the |\oddsidemargin| +% This arrow has to be a bit below the one for the |\oddsidemargin| % or\\ |\evensidemargin|. % \begin{macrocode} \advance\PositionY by 30 @@ -856,14 +856,14 @@ % \end{macrocode} % % -% The |\marginparsep|, this depends on single or double sided +% The |\marginparsep|, this depends on single- or double-sided % printing. % \begin{macrocode} \advance\PositionY by 30 \if@twoside % \end{macrocode} % -% Twosided mode, reversemargin; +% Two-sided mode, reversemargin: % \changes{v1.1b}{1994/03/23}{\cs{OutSideHArrow} should be % \cs{OutsideHArrow}} % \changes{v1.2}{1998/04/13}{Added check for reversemargin} @@ -878,7 +878,7 @@ \fi \else % \end{macrocode} -% Not reversemargin; +% Not reversemargin: % \begin{macrocode} \ifodd\count\z@ \OutsideHArrow\ref@marginpar\cnt@marginparsep{20} @@ -891,7 +891,7 @@ \else % \end{macrocode} % -% Single sided mode. +% Single-sided mode. % \changes{v1.2}{1998/04/13}{Added check for reversemargin} % \begin{macrocode} \if@reversemargin @@ -911,7 +911,7 @@ \Identify{9} % \end{macrocode} % -% Identify the |\footskip|. The arrow will be located on $1/8$th of +% Identify the |\footskip|. The arrow will be located on $1/8$ of % the |\textwidth|. % \changes{v1.2}{1998/04/13}{The \cs{PositionY} of the label 11 is % changed to the upper side of the arrows} @@ -942,7 +942,7 @@ % % Identify |\topmargin|, |\headheight| and |\headsep|. % -% The arrows will be located on $1/8$th of the |\textwidth|, with +% The arrows will be located on $1/8$ of the |\textwidth|, with % intervals of the same size, stored in |\Interval|. % \begin{macrocode} \Interval = \cnt@textwidth @@ -983,7 +983,7 @@ \Identify{5} \advance\PositionX by \Interval % \end{macrocode} -% and finally the |\headsep| +% and finally the |\headsep|. % \changes{v1.2}{1998/04/13}{The \cs{PositionY} of the label 6 is % fixed} % \begin{macrocode} @@ -1006,7 +1006,7 @@ % % Below the picture we put a table to show the actual values of the % parameters. Note that fractional points are truncated, i.e., -% \texttt{72.27pt} is displayed as \texttt{72pt} +% \texttt{72.27pt} is displayed as \texttt{72pt}. % % The table is typeset inside a box with a depth of 0 to always % keep it on the same page as the picture. diff --git a/Master/texmf-dist/source/latex/tools/longtable.dtx b/Master/texmf-dist/source/latex/tools/longtable.dtx index 332a95d224e..5fb6364e75b 100644 --- a/Master/texmf-dist/source/latex/tools/longtable.dtx +++ b/Master/texmf-dist/source/latex/tools/longtable.dtx @@ -37,7 +37,7 @@ %<driver> \ProvidesFile{longtable.drv} % \fi % \ProvidesFile{longtable.dtx} - [2021-09-01 v4.17 Multi-page Table package (DPC)] + [2025-10-25 v4.18 Multi-page Table package (DPC)] % % \iffalse %<*driver> @@ -54,7 +54,7 @@ % has version number \fileversion, last % revised \filedate.}} % \author{David Carlisle\thanks{The new algorithm for aligning `chunks' -% of a table used in version 4 of this package was devised coded +% of a table used in version 4 of this package was devised, coded % and documented by David Kastrup.}} % \date{\filedate} % @@ -317,7 +317,7 @@ % ".aux" file, so that it can line up the different chunks. % Prior to version~4 of this package, this information was not used % unless a "\setlongtables" command was issued, however, now the -% information is always used, using a new algorithm\footnote{Due to +% information is always used, via a new algorithm,\footnote{Due to % David Kastrup.} and so "\setlongtables" is no longer needed. It is % defined (but does nothing) for the benefit of old documents that % use it. @@ -396,7 +396,7 @@ % are modified in a compatible manner. % % You may use the "\label" command so that you can cross reference -% \env{longtable}s with "\ref". Note however, that the "\label" command +% \env{longtable}s with "\ref". Note, however, that the "\label" command % should not be used in a heading that may appear more than once. Place % it either in the \env{firsthead}, or in the body of the table. It % should not be the \emph{first} command in any entry. @@ -493,7 +493,7 @@ % always converged in three passes as described above, but in examples % such as the ones in Tables \ref{pass1}--\ref{pass4}, the final % widths were not optimal as the width of column~2, which is -% determined by a "\multicolumn" entry was not known when the final +% determined by a "\multicolumn" entry, was not known when the final % width for column~3 was fixed, due to the fact that \emph{both} % "\multicolumn" commands were switched from `draft' mode to `normal' % mode at the same time. @@ -511,7 +511,7 @@ % many overlapping "\multicolumn" entries, all being wider than the % natural widths of the columns they span, and all occurring in % different chunks. In the typical case the algorithm will converge -% after three or four passes, and, the benefits of not needing to edit +% after three or four passes, and the benefits of not needing to edit % the document before the final run to add "\setlongtables", and the % better choice of final column widths in the case of multiple % "\multicolumn" entries will hopefully more than pay for the extra @@ -576,7 +576,7 @@ % \item The mechanism for adding the head and foot of the table has been % completely rewritten. With this new mechanism, \env{longtable} does % not need to issue a "\clearpage" at the start of the table, and so the -% table may start half way down a page. Also the "\endlastfoot" command +% table may start half way down a page. Also the "\endlastfoot" command, % which could not safely be implemented under the old scheme, has been % added. % \item \env{longtable} now issues an error if started in the scope of @@ -673,7 +673,7 @@ % "\endhead"& % Specifies rows to appear at the top of every page.\\ % "\endfirsthead"& -% Specifies rows to appear at the top the first page.\\ +% Specifies rows to appear at the top of the first page.\\ % "\endfoot"& % Specifies rows to appear at the bottom of every page.\\ % "\endlastfoot"& @@ -885,7 +885,7 @@ % \begin{macro}{\LTchunksize} % \changes{v4.14}{2020/02/07} % {Increase default chunksize from 20 to 200} -% Chunk size (The number of rows taken per "\halign"). Default 200. +% Chunk size (the number of rows taken per "\halign"). Default 200. % \begin{macrocode} \newcount\LTchunksize \LTchunksize=200 % \end{macrocode} @@ -1189,12 +1189,12 @@ % \changes{v4.05}{1996/11/12} % {\cs{LT@setprevdepth} added} % The following line was added in v4.05. -% In order to get the "\penalties" to work at chunk boundaries -% Need to take more care about where and when "\lineskip" glue +% In order to get the "\penalties" to work at chunk boundaries, +% we need to take more care about where and when "\lineskip" glue % is added. The following does nothing at top of table, and in % header chunks, but in normal body chunks it sets "\prevdepth" % (to 0pt, but any value would do) so that "\lineskip" glue will -% be added. the important thing to note is that the glue will be +% be added. The important thing to note is that the glue will be % added \emph{after} any vertical material coming from "\noalign". % \begin{macrocode} \LT@setprevdepth @@ -1257,7 +1257,7 @@ % \end{macrocode} % \changes{v4.14}{2020/02/07} % {Guard against shrink glue on current page tools/3396 and github 183} -% This next block was suggested by Lars Hellström in pr tools/3396 +% This next block was suggested by Lars Hellström in pr tools/3396. % He documents it as: % % The original problem occurs because TeX has not yet found an awfully bad @@ -1325,7 +1325,7 @@ % \changes{v4.14}{2020/02/07} % {Guard against shrink glue on current page see github 183} % The LT output routine does not handle shrink on the page, which can cause -% The first page to be over-long, so forget it is there. +% the first page to be over-long, so forget it is there. % \begin{macrocode} \ifdim\pageshrink>\z@\pageshrink\z@\fi \fi @@ -1551,7 +1551,7 @@ % Increment the counter, and do \env{tabular}'s "\\" or finish the % chunk.\\ The "\expandafter" trick was added in Version~3. % Set the "\prevdepth" at the start of a new chunk. (Done here -% so not set in header chunks). +% so not set in header chunks.) % \begin{macrocode} \global\advance\LT@rows\@ne \ifnum\LT@rows=\LTchunksize @@ -2206,12 +2206,16 @@ \bgroup % \end{macrocode} % \changes{v4.12}{2019/02/06}{Color group to match array package} +% \changes{v4.18}{2023/08/25}{Use \cs{everypar} to match array package, github 1128}% % \begin{macrocode} \color@begingroup \let\@footnotetext\LT@p@ftntext \setlength\hsize{#1}% \@arrayparboxrestore - \vrule \@height \ht\@arstrutbox \@width \z@} + \everypar{% + \vrule \@height \ht\@arstrutbox \@width \z@ + \everypar{}}% + } % \end{macrocode} % \end{macro} % diff --git a/Master/texmf-dist/source/latex/tools/shellesc.dtx b/Master/texmf-dist/source/latex/tools/shellesc.dtx index 97ec542b662..aa707fe550a 100644 --- a/Master/texmf-dist/source/latex/tools/shellesc.dtx +++ b/Master/texmf-dist/source/latex/tools/shellesc.dtx @@ -20,7 +20,7 @@ %<driver> \ProvidesFile{shellesc.drv} % \fi % \ProvidesFile{shellesc.dtx} - [2023/04/15 v1.0d unified shell escape interface for LaTeX] + [2023/07/08 v1.0d unified shell escape interface for LaTeX] % % \iffalse %<*driver> @@ -50,7 +50,7 @@ % \section{Introduction} % % -% For many years web2c based \TeX\ implementations have used the syntax +% For many years web2c-based \TeX\ implementations have used the syntax % of the \verb|\write| command to access system commands by using a % special stream 18 (streams above 15 can not be allocated to files in % classical \TeX\ so stream 18 would otherwise just print to the @@ -59,9 +59,9 @@ % This is a useful extension that did not break the strict rules on % extensions in classical \TeX. This package provides a simple % macro level interface hiding the \verb|write18| implementation -% so a command to remove a file on a unix-like system could be +% so a command to remove a file on a Unix-like system could be % specified using \verb|\ShellEscape{rm file.txt}| (or \verb|del| in -% windows). Note that by default system access is not allowed and +% Windows). Note that by default system access is not allowed and % \LaTeX\ will typically need to be called with the \verb|--shell-escape| % command line option. % @@ -77,7 +77,7 @@ % \verb|\ShellEscape| in fact corresponds to \verb|\immediate\write18| % (or \verb|\directlua|). Very rarely you may need to delay a system % command until the current page is output (when page numbers are -% known) for this classically you could use \verb|\write18| (or +% known), for this you could classically use \verb|\write18| (or % (\verb|\latelua|). This package provides \verb|\DelayedShellEscape| % as a common syntax for this use. % @@ -92,7 +92,7 @@ % \verb|\immediate| will work as normal when writing to file streams % or the terminal but the special case of stream 18 which is defined to % use \verb|os.execute| always uses \verb|\directlua| (so corresponds -% to \verb|\immediate\write18|. In the rare situations that you need +% to \verb|\immediate\write18|). In the rare situations that you need % non-immediate \verb|\write18| in a document being ported to current % Lua\TeX, you will need to change to use the % \verb|\DelayedShellEscape| command. @@ -118,7 +118,7 @@ % % \begin{macro}{\ShellEscapeStatus} % \changes{v1.0a}{2019/10/13}{Command Introduced} -% Integer value with meanings 0 (shell escape disabled), 1 (shell escape allowed), 2 (Restricted shell escape). +% Integer value with meanings 0 (shell escape disabled), 1 (shell escape allowed), 2 (restricted shell escape). % % \begin{macrocode} \chardef\ShellEscapeStatus @@ -215,8 +215,8 @@ if status == nil then % % \subsection{The write18 package interface} % -% In web2c based engines other than Lua\TeX, |\write18| may be used -% directly. The same was true in older LuaTeX, but from version 0.85 +% In web2c-based engines other than Lua\TeX, |\write18| may be used +% directly. The same was true in older Lua\TeX, but from version 0.85 % onwards that is not available. % % The above |shellesc| package interface is recommended for new code, diff --git a/Master/texmf-dist/source/latex/tools/showkeys.dtx b/Master/texmf-dist/source/latex/tools/showkeys.dtx index 98410041569..c90b3863e1a 100644 --- a/Master/texmf-dist/source/latex/tools/showkeys.dtx +++ b/Master/texmf-dist/source/latex/tools/showkeys.dtx @@ -39,7 +39,7 @@ %<driver> \ProvidesFile{showkeys.drv} % \fi % \ProvidesFile{showkeys.dtx} - [2023/05/11 v3.19 Show cite and label keys (DPC, MH)] + [2023/07/08 v3.19 Show cite and label keys (DPC, MH)] % % \iffalse %<*driver> @@ -112,13 +112,13 @@ % print its key argument (usually in the margin). % % If you find the printed keys distracting, but don't want to use the -% above options to stop them altogether you may use: +% above options to stop them altogether, you may use: % \begin{description} % \item[color] Print the keys in a distinguishing colour. The default % value is a light grey. % \end{description} % The colours may be changed by redefining the following two colours -% after the package is loaded. +% after the package is loaded: % |refkey| (also used for |\cite|) and % |labelkey| (also used for |\bibitem|). % The defaults are: @@ -131,7 +131,7 @@ % % The package accepts two further options. % \begin{description} -% \item[final] to suporess the action of this package, for `final' +% \item[final] to suppress the action of this package, for `final' % versions. % \item[draft] the normal behaviour of this package. % \end{description} @@ -437,7 +437,7 @@ % change |\prevdepth| as that would affect vertical spacing in the % document. (The box itself should not cause any difference in break % points as there is a node there anyway coming from the |\write| to -% the aux file. +% the aux file.) % \begin{macrocode} \dimen@\prevdepth \nointerlineskip @@ -451,8 +451,8 @@ % In inner vertical mode, attach the label to the right of the % immediately preceding box, if it is a box before the current point. % Otherwise just put it in a box of zero dimensions, with no interline -% skip. (This may slightly move the surrounding text (but perhaps not -% now that |\prevdepth| is restored.) +% skip. This may slightly move the surrounding text (but perhaps not +% now that |\prevdepth| is restored). % \changes{v3.00}{1994/09/07} % {Back up over a previous skip because of the new % \cs{belowcaptionskip}} @@ -502,7 +502,7 @@ \fi \else % \end{macrocode} -% If we are in an numbered equation-style environment, do nothing as the +% If we are in a numbered equation-style environment, do nothing as the % code to print the number will also print the label, otherwise just % stick the label at the current point, in a box of zero dimensions. % \changes{v3.02}{1995/03/17} @@ -650,7 +650,7 @@ % The following environments print an equation number, so |\label| % should not print its argument at the point where it appears. % Note this will fail to show the label if you are in an |eqnarray| -% environment, and use |\label| together with |\nonumber| This might +% environment, and use |\label| together with |\nonumber|. This might % just about make sense if you are going to use |\pageref|, but that is % too bad\ldots % \begin{macrocode} @@ -665,7 +665,7 @@ % \changes{v3.09}{1996/08/30} % {Fix eqnarray AMS incompatibility. tools/2252} % When the AMS packages are loaded |showkeys| assumes environments -% work `The AMS way' However |eqnarray| (unlike |equation|) is not +% work `The AMS way'. However, |eqnarray| (unlike |equation|) is not % redefined, so here we need to remove some of the AMS hacks. % \begin{macrocode} \toks@\expandafter{\eqnarray} diff --git a/Master/texmf-dist/source/latex/tools/tabularx.dtx b/Master/texmf-dist/source/latex/tools/tabularx.dtx index 177d92f12fd..6d59ca4c228 100644 --- a/Master/texmf-dist/source/latex/tools/tabularx.dtx +++ b/Master/texmf-dist/source/latex/tools/tabularx.dtx @@ -31,7 +31,7 @@ %<driver> \ProvidesFile{tabularx.drv} % \fi % \ProvidesFile{tabularx.dtx} - [2020/01/15 v2.11c `tabularx' package (DPC)] + [2023/07/08 v2.11c `tabularx' package (DPC)] % \iffalse %<*driver> \documentclass{ltxdoc} @@ -164,7 +164,7 @@ % \item The body of the {\ttfamily tabularx} environment is in fact the % argument to a command, and so certain constructions which are not % allowed in command arguments (like "\verb") may not be used.\footnote -% {Since Version 1.02, {\ttfamily\bslash verb and \ttfamily\bslash +% {Since Version 1.02, {\ttfamily\bslash verb} and {\ttfamily\bslash % verb*} may be used, but they may treat spaces incorrectly, and the % argument can not contain an unmatched {\ttfamily\char`\{} or % {\ttfamily\char`\}}, or a {\ttfamily\char`\%} character.} @@ -207,7 +207,7 @@ % % \DescribeMacro{\newcolumntype} % These preamble specifications may of course be saved using the -% command, "\newcolumntype", defined in {\ttfamily array.sty}. Thus we +% command "\newcolumntype" defined in {\ttfamily array.sty}. Thus we % may say\\ % "\newcolumntype{Y}{>{\small\raggedright\arraybackslash}X}"\\ % and then use {\ttfamily Y} in the {\ttfamily tabularx} preamble @@ -314,7 +314,7 @@ % \footnote{This adds an extra level of grouping, % which is not really needed. Instead, I could use \box0\ here, and % \box2\ below, however the code here would then have to be moved after -% the first line, because of the footnote to page 386 of the \TeX{}Book, +% the first line, because of the footnote to page 386 of the \TeX{}book, % and I do not think I should be writing code that is so obscure as to % be documented in a footnote in an appendix called ``Dirty Tricks''!} % @@ -331,9 +331,9 @@ %\newenvironment{foo}{\tabularx{XX}}{\endtabularx} %\end{verbatim} % The scanner now looks for the end of the current environment ("foo" in -% this example.) There are some restrictions on this usage, the -% principal one being that "\endtabularx" must not be inside any "{ }" pairs -% ao that the code before "\endtabularx" may be extracted and added to the table body +% this example). There are some restrictions on this usage, the +% principal one being that "\endtabularx" must not be inside any "{ }" pairs, +% so that the code before "\endtabularx" may be extracted and added to the table body % (prior to version 2.09 "\endtabularx" had to be % the \emph{first} token of the `end code' of the environment). % \begin{macrocode} @@ -396,7 +396,7 @@ % \changes{v2.09}{2014/04/22}{macro added} % \changes{v2.10}{2014/05/13}{macro modified to test for missing \cs{endtabularx}} % \changes{v2.11}{2016/01/03}{Fix to previous change to guard against empty arg 2. (Ulrike Fischer)} -% split up the end code, and extract the part that lives in the table body. +% Split up the end code, and extract the part that lives in the table body. % \begin{macrocode} \long\def\TX@find@endtabularxa #1\endtabularx#2\endtabularx#3\TX@find@endtabularxa{% @@ -408,7 +408,7 @@ % \begin{macro}{\TX@find@endtabularxb} % \changes{v2.09}{2014/04/22}{macro added} % \changes{v2.10}{2014/05/13}{macro modified to test for missing \cs{endtabularx}} -% split up the end code, and extract the part that lives outside the table body. +% Split up the end code, and extract the part that lives outside the table body. % \begin{macrocode} \long\def\TX@find@endtabularxb #1\endtabularx#2\endtabularx#3\TX@find@endtabularxb{% @@ -502,7 +502,7 @@ \TX@col@width\TX@target \global\TX@cols\@ne % \end{macrocode} -% Typeout some headings (unless this is disabled). +% Type out some headings (unless this is disabled). % \begin{macrocode} \TX@typeout@ {\@spaces Table Width\@spaces Column Width\@spaces X Columns}% @@ -514,7 +514,7 @@ \global\advance\TX@cols\@ne\NC@find p{\TX@col@width}}}% % \end{macrocode} % Repeatedly decrease column width until table is the correct width, -% or stops shrinking, or the columns become two narrow. +% or stops shrinking, or the columns become too narrow. % If there are no multicolumn entries, this will only take one attempt. % \begin{macrocode} \loop @@ -601,7 +601,7 @@ \ifdim\dimen@<\TX@delta % \end{macrocode} % If this amount is less than "\TX@delta", stop. ("\TX@delta" -% should be non-zero otherwise we may miss the target due to rounding +% should be non-zero, otherwise we may miss the target due to rounding % error.) % \begin{macrocode} \TX@typeout@{Reached target.}% @@ -621,7 +621,7 @@ \ifdim \dimen@ >\z@ % \end{macrocode} % If the new width would be too narrow, abort the loop. At the moment -% too narrow, means less than 0\,pt! +% too narrow means less than 0\,pt! % % Prior to v2.03, if the loop was aborted here, the X columns were left % with the width of the previous run, but this may make the table far @@ -715,7 +715,7 @@ \expandafter\let\expandafter\endtabularx\csname endtabular*\endcsname % \end{macrocode} % Added at v1.05: disable "\write"s during a trial run. This trick is -% from the \TeX{}Book.\footnote{Actually the \TeX{}Book trick does +% from the \TeX{}book.\footnote{Actually the \TeX{}book trick does % not work correctly, so changed for v2.05.} % \changes{v2.05}{1997/09/18} % {New \cs{write} trick. tools/2607} @@ -789,7 +789,7 @@ % \end{macro} % % \begin{macro}{\TX@typeout} -% The default is to be to be quiet +% The default is to be quiet. % \begin{macrocode} \let\TX@typeout\@gobble \let\TX@typeout@\@gobble @@ -830,7 +830,7 @@ % tabularx}, but that did not stop people using it! This usually put % \LaTeX\ into an irrecoverable error position, with error messages that % did not mention the cause of the error. The `poor man's "\verb"' (and -% "\verb*") defined here is based on page 382 of the \TeX{}Book. As +% "\verb*") defined here is based on page 382 of the \TeX{}book. As % explained there, doing verbatim this way means that spaces are not % treated correctly, and so "\verb*" may well be useless, however I % consider this section of code to be error-recovery, rather than a real @@ -882,10 +882,10 @@ % does not consist of a single "{ }" group. \TeX\ would strip the outer % braces from such a group. The `"!"' will be removed later. % -% Originally I followed Knuth, and had "\def\@tempa{##1}", however this +% Originally I followed Knuth, and had "\def\@tempa{##1}", however, this % did not allow "#" to appear in the argument. So in v1.04, I changed -% this to use a token register, and "\edef". This allows "#" appear, -% but makes each one appear twice!, so later we loop through, replacing +% this to use a token register, and "\edef". This allows "#" to appear +% but makes each one appear twice, so later we loop through, replacing % "##" by "#". % \begin{macrocode} \def\TX@vb#1{\def\@tempa##1#1{\toks@{##1}\edef\@tempa{\the\toks@}% diff --git a/Master/texmf-dist/source/latex/tools/theorem.dtx b/Master/texmf-dist/source/latex/tools/theorem.dtx index 58476db07ee..e3a8e90b8c2 100644 --- a/Master/texmf-dist/source/latex/tools/theorem.dtx +++ b/Master/texmf-dist/source/latex/tools/theorem.dtx @@ -24,7 +24,7 @@ %% % % -\def\FMithmInfo{2014/10/28 v2.2c Theorem extension package (FMi)} +\def\FMithmInfo{2023/07/05 v2.2c Theorem extension package (FMi)} % % \ProvidesFile{theorem.dtx}[\FMithmInfo] %\iffalse % this is a METACOMMENT ! @@ -100,7 +100,7 @@ % % \begin{abstract} % The macros described in this paper yield an extension of the -% \LaTeX{} theorem mechanism. It is designed is to satisfy the +% \LaTeX{} theorem mechanism. It is designed to satisfy the % different requirements of various journals. Thus, the % layout of the ``theorems'' can be manipulated by determining a % ``style''. This article describes not only the use, but @@ -226,7 +226,7 @@ % |\theorempreskipamount| and |\theorempostskipamount| define, % respectively, the spacing before and after such an environment. % These parameters apply for all theorem sets and can be manipulated -% with the ordinary length macros. They are rubber lengths, +% with the ordinary length macros. They are rubber lengths % (`\textsf{skips}'), and therefore can contain \texttt{plus} and % \texttt{minus} parts. % @@ -385,7 +385,7 @@ % \section{Definition of the Macros} % % If the file has been loaded before, we abort immediately. If not the -% package announces itself (this is actually done at the very top if +% package announces itself (this is actually done at the very top of % the file---the way it is done isn't good style so don't copy it). % \changes{v2.0e}{89/07/19}{Spaces removed from `typeout'.} % \changes{v2.2b}{95/11/19}{Announce moved to top of file} @@ -546,8 +546,8 @@ % ``non-Big-versions'', we have to avoid offering too many unused % definitions. Therefore we define these styles in separate files % that can be loaded on demand. Thus the commands themselves only -% load these files. We use |\@input@| a \LaTeXe{} internal command -% that ensures that the file will be listed with |\listfiles| +% load these files. We use |\@input@|, a \LaTeXe{} internal command +% that ensures that the file will be listed with |\listfiles|. % \changes{v2.2a}{94/02/02}{Use `@input@ to load theorem layout files} % \begin{macrocode} \gdef\th@plain{\@input@{thp.sty}} diff --git a/Master/texmf-dist/source/latex/tools/verbatim.dtx b/Master/texmf-dist/source/latex/tools/verbatim.dtx index 0085f166ea1..832f80ef3a0 100644 --- a/Master/texmf-dist/source/latex/tools/verbatim.dtx +++ b/Master/texmf-dist/source/latex/tools/verbatim.dtx @@ -48,14 +48,14 @@ \pagestyle{myheadings} \title{A New Implementation of \LaTeX{}'s \\ \texttt{verbatim} - and \texttt{verbatim*} Environments.} + and \texttt{verbatim*} Environments} \author{Rainer Sch\"opf\\ \and Bernd Raichle\\ \and Chris Rowley} -\date{2022/07/02} +\date{2023/07/08} \begin{document} \markboth{Verbatim style option}{Verbatim style option} \MaintainedByLaTeXTeam{tools} @@ -434,7 +434,7 @@ % % A further possibility is to define a variant of the |verbatim| % environment that boxes and centers the whole verbatim text. -% Note that the boxed text should be less than a page otherwise you +% Note that the boxed text should be less than a page, otherwise you % have to change this example. % %\begin{verbatim} @@ -706,7 +706,7 @@ % necessary for correct vertical spacing if \texttt{verbatim} % is nested inside \texttt{quote}.} % The following extra vertical space is for compatibility with the -% \LaTeX kernel: otherwise, using the |verbatim| package changes +% \LaTeX{} kernel: otherwise, using the |verbatim| package changes % the vertical spacing of a |verbatim| environment nested within a % |quote| environment. % \begin{macrocode} @@ -790,18 +790,18 @@ \def\@noitemerr{\@warning{No verbatim text}}% % \end{macrocode} % Now we call |\obeylines| to make the end of line character -% active, +% active. % \begin{macrocode} \obeylines % \end{macrocode} -% change the category code of all special characters, +% The category code of all special characters is changed, % to $12$ (other). % \changes{v1.5i}{1996/06/04}{Moved \cs{verbatim@font} after % \cs{dospecials}.} % \begin{macrocode} \let\do\@makeother \dospecials % \end{macrocode} -% and switch to the font to be used. +% We switch to the font to be used. % \begin{macrocode} \verbatim@font % \end{macrocode} @@ -1391,7 +1391,7 @@ % (This token list was inserted after the current macro % by |\verbatim@@@|.) % Since we are still in an |\edef| we protect it -% by means of|\noexpand|. +% by means of |\noexpand|. % \begin{macrocode} \noexpand\verbatim@rescan{\@currenvir}}% % \end{macrocode} @@ -1493,7 +1493,7 @@ \else % \end{macrocode} % At this point we pass the name of the file to |\@addtofilelist| -% so that its appears in the output of a |\listfiles| +% so that it appears in the output of a |\listfiles| % command. % \changes{v1.5j}{1996/09/25}{Add \cs{@addtofilelist} and % \cs{ProvidesFile} so that the name of the file @@ -1579,9 +1579,9 @@ % the contents of |\@filef@und|, we need to save it by expanding it % first. The use of |\@swaptwoargs| makes it so that the % \emph{expansion} of |\@filef@und| gets to be the second argument -% of |\verbatim@readfile|. +% of |\verbatim@readfile|. % \changes{v1.5t}{2020-07-06}{Expand \cs{@filef@und} before the call -% of \cs{@verbatim} (gh/222)}m +% of \cs{@verbatim} (gh/222)} % \begin{macrocode} \def\verbatim@input#1#2{% \IfFileExists {#2}{% @@ -1606,7 +1606,7 @@ % \end{macro} % % -% \subsection{Getting verbatim text into arguments.} +% \subsection{Getting verbatim text into arguments} % % One way of achieving this is to define a macro (command) whose % expansion is the required verbatim text. This command can then be diff --git a/Master/texmf-dist/source/latex/tools/xr.dtx b/Master/texmf-dist/source/latex/tools/xr.dtx index 0dd5f3ad95f..be48f5a01b2 100644 --- a/Master/texmf-dist/source/latex/tools/xr.dtx +++ b/Master/texmf-dist/source/latex/tools/xr.dtx @@ -25,7 +25,7 @@ % %<package>\NeedsTeXFormat{LaTeX2e} %<package>\ProvidesPackage{xr} -%<package> [2020-05-10 v5.06 eXternal References (DPC)] +%<package> [2023-07-04 v5.06 eXternal References (DPC)] % %<*driver> \documentclass{ltxdoc} @@ -74,7 +74,7 @@ % If any of the external documents, or the main document, use the same % |\label| then an error will occur as the label will be multiply % defined. To overcome this problem |\externaldocument| has an optional -% argument. If you declare |\externaldocument[A-]{aaa}| Then all +% argument. If you declare |\externaldocument[A-]{aaa}|, then all % references from |aaa| are prefixed by |A-|. So for instance, if a % section of |aaa| had |\label{intro}|, then this could be referenced % with |\ref{A-intro}|. The prefix need not be |A-|, it can be any |