summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/cd
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2014-06-27 21:59:50 +0000
committerKarl Berry <karl@freefriends.org>2014-06-27 21:59:50 +0000
commit7e0271fe9b567db0c855288f5a8591c3ba4ab033 (patch)
tree1bff6a54e5cfa9962802118dc9bb5009196eb27e /Master/texmf-dist/source/latex/cd
parentf3795a34d66778ad8168c661c02cf1da780c7654 (diff)
cd (27jun14)
git-svn-id: svn://tug.org/texlive/trunk@34452 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/source/latex/cd')
-rw-r--r--Master/texmf-dist/source/latex/cd/cd.dtx1344
1 files changed, 748 insertions, 596 deletions
diff --git a/Master/texmf-dist/source/latex/cd/cd.dtx b/Master/texmf-dist/source/latex/cd/cd.dtx
index 32f26fea610..03557bfd27b 100644
--- a/Master/texmf-dist/source/latex/cd/cd.dtx
+++ b/Master/texmf-dist/source/latex/cd/cd.dtx
@@ -1,6 +1,7 @@
% \iffalse meta-comment
%
% File: cd.dtx Copyright (C) 1998-2007 Sebastiano Vigna
+% Copyright (C) 2014 Werner Lemberg
%
% This file is free software; you can redistribute it and/or modify
% it under the terms of the GNU General Public License as published by
@@ -19,7 +20,7 @@
%
% \fi
%
-% \CheckSum{1028}
+% \CheckSum{1121}
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
@@ -39,16 +40,20 @@
% \iffalse
%
%<class>\NeedsTeXFormat{LaTeX2e}
-%<class>\ProvidesClass{cd}[2007/10/12 v1.3 CD Cover Class]
+%<class>\ProvidesClass{cd}[2014/06/13 v1.4 CD Cover Class]
%
%<*driver>
\documentclass{ltxdoc}
+\RecordChanges
\GetFileInfo{cd.cls}
+
\title{A CD Cover Class}
\date{Printed \today}
\author{Sebastiano Vigna}
+
\begin{document}
\maketitle
+ \tableofcontents
\DocInput{cd.dtx}
\end{document}
%</driver>
@@ -56,23 +61,47 @@
% \fi
%
%
-% \changes{v0.0}{1998/06/04}{Created file.}
-% \changes{v0.1}{1998/06/15}{New macros for data file handling.}
-% \changes{v1.0}{2002/01/10}{Bumped revision number 8^).}
-% \changes{v1.1}{2005/09/08}{Added support for slim cases. Better positioning, too.}
-% \changes{v1.3}{2007/10/12}{Implemented covergraphics, etc. and .dat/.lst filename from job name}
+% \changes{v0.0}{1998/06/04}
+% {Created file.}
+%
+% \changes{v0.1}{1998/06/15}
+% {New macros for data file handling.}
+%
+% \changes{v1.0}{2002/01/10}
+% {Bump revision number.}
+%
+% \changes{v1.1}{2005/09/08}
+% {Add support for slim cases.}
+% \changes{v1.1}{2005/09/08}
+% {Better positioning, too.}
+%
+% \changes{v1.3}{2007/10/12}
+% {Implement covergraphics, etc.}
+% \changes{v1.3}{2007/10/12}
+% {Implement .dat/.lst filename from job name.}
+%
+% \changes{v1.4}{2014/06/13}
+% {Make track list height configurable.}
+% \changes{v1.4}{2014/06/13}
+% {Add \cs{trackrange} command.}
+% \changes{v1.4}{2014/06/13}
+% {Fix typo in \cs{track} command.}
+% \changes{v1.4}{2014/06/13}
+% {Make slim and normal back covers use the same height.}
%
%
% \section{Introduction}
%
-% The purpose of this class is to print CD covers. The main design line
-% is allowing the creation of labels with minimum effort, without restraining the
-% freedom to customise. There is also some support for multiple cover printing.
-% Since version 1.1, slim CD boxes are supported.
+% The purpose of this class is to print CD covers. The main design line is
+% allowing the creation of labels with minimum effort, without restraining
+% the freedom to customise. There is also some support for multiple cover
+% printing. Since version 1.1, slim CD boxes are supported.
+%
+% Each CD cover is created by a number of commands that set the content of
+% the front cover, back cover, track lists etc. After everything is ready,
+% additional commands actually generate the covers. This is a very simple
+% example:
%
-% Each CD cover is created by a number of commands which set the content
-% of the front cover, back cover, track lists etc. After everything is ready,
-% additional commands actually generate the covers. This is a very simple example:
% \begin{verbatim}
% \documentclass{cd}
% \begin{document}
@@ -97,18 +126,20 @@
% \makeback\par
% \end{document}
% \end{verbatim}
-% By compiling the file above, you will obtain your first CD cover.
-% Using |\makeslimcover| instead of |\makecover| and |\makeback|, you
-% will obtain a single cover for a slim CD box.
-%
-% Equivalently, you can create a file |CD.dat| containing the lines between
-% |\begin{document}| and |\makecover| and compile with
-% \LaTeX\ the file |CD.tex| (or |slimCD.tex|). This is a better mechanism---each CD should
-% have its own data (|.dat|) file, which is run through the driver file
-% |CD.tex| or the more powerful list mechanism described below.
-% This also allows to set some parameters one for all (for instance,
-% the font family) in the driver file. My driver file, for instance, is
-% as follows (see below for the non-standard commands):
+%
+% By compiling the file above, you will obtain your first CD cover. Using
+% |\makeslimcover| instead of |\makecover| and |\makeback|, you will obtain
+% a single cover for a slim CD box.
+%
+% Equivalently, you can create a file |CD.dat| containing the lines between
+% |\begin{document}| and |\makecover| and compile with \LaTeX{} the file
+% |CD.tex| (or |slimCD.tex|). This is a better mechanism---each CD should
+% have its own data (|.dat|) file that is run through the driver file
+% |CD.tex| or the more powerful list mechanism described below. This also
+% allows to set some parameters one for all (for instance, the font family)
+% in the driver file. My driver file, for instance, is as follows (see
+% below for the non-standard commands):
+%
% \begin{verbatim}
% \documentclass[a4paper]{cd}
% \usepackage[latin1]{inputenc}
@@ -119,144 +150,167 @@
% \makeCD
% \end{document}
% \end{verbatim}
-% The |CD| class loads the |article| class, so commands like |\Large|
-% or |\smallskip| are available. However, the |CD| class provides its
-% own precise size-switching commands, and for greater accuracy it is
-% advisable to use \LaTeX's |\\|\oarg{vspace} mechanism in order to
-% generate vertical spacing.
%
-% Note that the class uses heavily the |rotating|
-% package, so you must convert the resulting dvi file into PostScript\textregistered,
-% or use directly |pdflatex|.
-%
+% The |CD| class loads the |article| class, so commands like |\Large| or
+% |\smallskip| are available. However, the |CD| class provides its own
+% precise size-switching commands, and for greater accuracy it is advisable
+% to use \LaTeX's |\\|\oarg{vspace} mechanism in order to generate vertical
+% spacing.
+%
+% Note that the class uses heavily the |rotating| package, so you must
+% convert the resulting dvi file into PostScript\textregistered, or use
+% directly |pdflatex|.
+%
%
% \section{The Text Commands}
%
-% The content of a CD cover are set using the self-explaining
-% |\covertext|, |\backtext|, |\insidetext|, |\leftspine|, |\centerspine|,
-% |\rightspine|,
-% |\lefttracklist|, |\righttracklist|, |\leftinfo|
-% and |\rightinfo| commands (|\insidetext|, |\leftspine|, |\centerspine| and
-% |\rightspine| are ignored for slim covers). Note that by default the material contained in
-% |\covertext|, |\backtext| and |\insidetext| is bottom-aligned, and
-% the arguments of the spine commands must not contain line breaks. The left
-% and right track lists should use the |\track| command, which inserts a
-% |\par| and an automatically numbered box with the track number. Should you
-% need to set manually the track number, use |\setindex|\marg{n}. The text
-% contained in |\leftinfo| and |\rightinfo| is bottom-aligned just under
-% the respective track lists. Note that if the right information or track list box
-% is empty, the left one will span across the whole cover.
-% By default everything is typeset with
-% no justification, and no paragraph indentation. One tenth of the current
+% The content of a CD cover are set using the following self-explaining
+% commands.
+%
+% \begin{quote}
+% |\covertext|, |\backtext|, |\insidetext|,\\
+% |\leftspine|, |\centerspine|, |\rightspine|,\\
+% |\lefttracklist|, |\righttracklist|,\\
+% |\leftinfo|, |\rightinfo|
+% \end{quote}
+%
+% \noindent The commands |\insidetext|, |\leftspine|, |\centerspine| and
+% |\rightspine| are ignored for slim covers. Note that by default the
+% material contained in |\covertext|, |\backtext| and |\insidetext| is
+% bottom-aligned, and the arguments of the spine commands must not contain
+% line breaks. The left and right track lists should use the |\track|
+% command, which inserts a |\par| and an automatically numbered box with the
+% track number. There is also a |\trackrange| command that takes a
+% parameter and adds a range indication (two numbered boxes separated by a
+% dash). Should you need to set manually the track number, use
+% |\setindex|\marg{n}. The text contained in |\leftinfo| and |\rightinfo|
+% is bottom-aligned just under the respective track lists. Note that if the
+% right information or track list box is empty, the left one will span
+% across the whole cover. By default everything is typeset with no
+% justification, and no paragraph indentation. One tenth of the current
% baseline skip is inserted between paragraphs.
%
-% In extreme cases you may want to create different spines (e.g., for R.E.M.'s
-% \emph{Fables Of The Reconstruction}); the |\leftspinebis|, |\centerspinebis|
-% and |\rightspinebis| commands allows you to insert different content into the
-% ``back'' spine.
+% In extreme cases you may want to create different spines (e.g., for
+% R.E.M.'s \emph{Fables Of The Reconstruction}); the |\leftspinebis|,
+% |\centerspinebis| and |\rightspinebis| commands allows you to insert
+% different content into the ``back'' spine.
+%
+% The height of the track list (in millimeters) can be set with
+% |\tracklistheight|, which expects a dimensionless, positive integer value.
+% If not specified, the height is set to 70. The sum of the track list
+% height and the height of the area used to typeset |\covertext| on the back
+% cover equals 100.
+%
%
% \section{The Graphic Commands}
%
-% In the case you want to fill the cover or the inside of your CD with a picture,
-% the commands |\covergraphics| and |\insidegraphics| work like |\covertext|
-% and |\insidetext|, but they create no border (as opposed to the standard 1\,cm border
-% for text).
+% In the case you want to fill the cover or the inside of your CD with a
+% picture, the commands |\covergraphics| and |\insidegraphics| work like
+% |\covertext| and |\insidetext|, but they create no border (as opposed to
+% the standard 1\,cm border for text).
+%
%
% \section{The Font Commands}
%
% The |CD| class provides some simple commands for switching the font
-% dimension and line spacing. The command |\fh|\marg{height} sets the
-% font height to the given number of points (line spacing is not affected),
-% while |\fhb|\marg{height}\marg{baselineskip} sets both the font height
-% and the baseline skip (usually 6/5 of the font height will work). Note
-% that you can just write |\fh7| in order to switch to a 7 point font, and that
-% the |\fhb| command always sets |\parskip| to 1/10 of the
-% current baseline skip, so |\par| will always space a little more than |\\|.
+% dimension and line spacing. The command |\fh|\marg{height} sets the font
+% height to the given number of points (line spacing is not affected), while
+% |\fhb|\marg{height}\marg{baselineskip} sets both the font height and the
+% baseline skip (usually 6/5th of the font height will work). Note that you
+% can just write |\fh7| in order to switch to a 7~point font, and that the
+% |\fhb| command always sets |\parskip| to 1/10th of the current baseline
+% skip, so |\par| will always space a little more than |\\|.
%
% When you issue a |\newcd| command, all fonts are reset to their default
-% values. But there are a number of self-explaining commands, i.e.,
-% |\coverfont|, |\backfont|, |\insidefont|, |\spinefont|, |\tracklistfont|, |\infofont|
-% and |\indexfont|, that allow to change the font assigned to a part
-% of the cover. In fact, they are just one-argument macros
-% whose arguments are expanded just before the
-% corresponding text commands, and can contain other formatting parameters.
+% values. But there are a number of self-explaining commands, i.e.,
+% |\coverfont|, |\backfont|, |\insidefont|, |\spinefont|, |\tracklistfont|,
+% |\infofont| and |\indexfont|, that allow to change the font assigned to a
+% part of the cover. In fact, they are just one-argument macros whose
+% arguments are expanded just before the corresponding text commands, and
+% can contain other formatting parameters.
+%
%
% \section{The Cover Creation Commands}
%
% Before setting the content of the cover, the |\newcd| command takes care
-% of resetting everything to default values. In particular, |\backtext|
-% is the same as |\covertext| (unless you change it
-% explicitly), so usually you do not need to set the former (note
-% that, of course, this does \emph{not} happen with |\covergraphics|).
-% Analogously, |\backfont| is the same as |\coverfont|.
+% of resetting everything to default values. In particular, |\backtext| is
+% the same as |\covertext| (unless you change it explicitly), so usually you
+% do not need to set the former (note that, of course, this does \emph{not}
+% happen with |\covergraphics|). Analogously, |\backfont| is the same as
+% |\coverfont|.
%
% Once everything is set up, the |\makecover| and |\makeback| commands will
% create a cover and a back cover using the data set so far, whereas the
-% |\makeslimcover| will create a slim cover. Both command have
-% an optional argument that can contain any of the letters |lrtb| (left,
-% right, top, bottom), which create the respective
-% crop marks (note that the argument must be enclosed in brackets). The default value is |lrtb|.
-% The possibility of partially eliminating crop marks is particularly
-% useful when stacking several covers in the same sheet.
-%
-% It is possible to create a single \LaTeX\ document containing a CD
-% cover, but it is usually more useful to create a data file containing all
+% |\makeslimcover| will create a slim cover. Both commands have an optional
+% argument that can contain any of the letters |lrtb| (left, right, top,
+% bottom), which create the respective crop marks (note that the argument
+% must be enclosed in brackets). The default value is |lrtb|. The
+% possibility of partially eliminating crop marks is particularly useful
+% when stacking several covers in the same sheet.
+%
+% It is possible to create a single \LaTeX{} document containing a CD cover,
+% but it is usually more useful to create a data file containing all
% |CD|-specific command, and include it from a ``driver'' file, containing
-% the |\makeCD| or the |\makeslimCD| command. With no argument, it checks for the existence
-% of a \textit{jobname}|.dat| file (where \textit{jobname} is the root of the
-% \LaTeX file under compilation---e.g., |CD.dat| when compiling |CD.tex|).
-% If such a file exists, it is input and then the (slim) CD cover is
-% generated. Otherwise, the user is asked for a data file name (the |CD| class
-% will try automatically to append the |.dat| extension to the name), which
-% is read and processed. Of course, the optional argument (which, note again,
-% must be enclosed in brackets) can be used to specify a data file name.
-%
-% Having a database of data files is particularly useful when using the |\makelist| or the
-% |\makeslimlist| commands, which
-% process an entire list of CDs, printing one cover (or two
-% back covers) per page; the crop marks are suitably aligned so to minimise
-% the cutting effort. The CD list must be contained in a list file, one
-% data file name per line. With no argument, |\makelist| and |\makeslimlist| check for the existence
-% of a |CD.lst| file. If it exists, it is input; otherwise, the user is asked
-% for a list file name (the |CD| class
-% will try automatically to append the |.lst| extension to the name), which
-% is read and processed. Again, the optional argument can be used to
-% specify a list file name.
+% the |\makeCD| or the |\makeslimCD| command. With no argument, it checks
+% for the existence of a \textit{jobname}|.dat| file (where \textit{jobname}
+% is the root of the \LaTeX{} file under compilation---e.g., |CD.dat| when
+% compiling |CD.tex|). If such a file exists, it is input and then the
+% (slim) CD cover is generated. Otherwise, the user is asked for a data
+% file name (the |CD| class will try automatically to append the |.dat|
+% extension to the name), which is read and processed. Of course, the
+% optional argument (which, note again, must be enclosed in brackets) can be
+% used to specify a data file name.
+%
+% Having a database of data files is particularly useful when using the
+% |\makelist| or the |\makeslimlist| commands, which process an entire list
+% of CDs, printing one cover (or two back covers) per page; the crop marks
+% are suitably aligned so to minimise the cutting effort. The CD list must
+% be contained in a list file, one data file name per line. With no
+% argument, |\makelist| and |\makeslimlist| check for the existence of a
+% |CD.lst| file. If it exists, it is input; otherwise, the user is asked
+% for a list file name (the |CD| class will try automatically to append the
+% |.lst| extension to the name), which is read and processed. Again, the
+% optional argument can be used to specify a list file name.
+%
%
% \section{The Options}
-% You can pass to the |CD| class all the options of the |article|
-% class (e.g., paper size). Moreover, there are options |aligncovertop|,
-% |aligninsidetop|, |alignbacktop| and |aligntop| (the last one resumes the first
-% three ones), and analogously |aligncovercenter|, etc.~that allow to change
-% the default alignment behaviour. The |covergraphics| option lets you use
-% the entire cover area (instead of a centered 10\,cm$\times$10\,cm square).
-% Finally, the |alignspine| option forces
-% vertical centring of the spine text
-% on the ``real'' height of the box involved,
-% rather than on the height of a generic upper case character. This is not usually what you
-% want, since, e.g., accents can lead to ugly results. Experiment.
+%
+% You can pass to the |CD| class all the options of the |article| class
+% (e.g., paper size). Moreover, there are options |aligncovertop|,
+% |aligninsidetop|, |alignbacktop| and |aligntop| (the last one resumes the
+% first three ones), and analogously |aligncovercenter|, etc., that allow to
+% change the default alignment behaviour. The |covergraphics| option lets
+% you use the entire cover area (instead of a centered 10\,cm$\times$10\,cm
+% square). Finally, the |alignspine| option forces vertical centring of the
+% spine text on the ``real'' height of the box involved, rather than on the
+% height of a generic upper case character. This is not usually what you
+% want, since, e.g., accents can lead to ugly results. Experiment.
%
%
% \section{Getting Obsessed}
%
-% PostScript fonts usually are set up in such a way that the metric
-% of all digits is the same, regardless of the actual appearance. This
-% (in particular with sans-serif fonts) can lead to a very ugly alignment
-% of two-digit track numbers in which either the first or the last digit is a 1.
-% The solution is to put in the preamble
-% a |\onecorrection|\marg{fraction} command: the positioning of two-digit numbers
-% either starting or ending with 1 will be corrected by the given fraction
-% of the width of a 1. For instance, |\onecorrection{.2}| works great for
-% AvantGarde. The values for other fonts must be set by trial-and-error.
+% PostScript fonts usually are set up in such a way that the metric of all
+% digits is the same, regardless of the actual appearance. This (in
+% particular with sans-serif fonts) can lead to a very ugly alignment of
+% two-digit track numbers in which either the first or the last digit is
+% a~1. The solution is to put in the preamble a
+% |\onecorrection|\marg{fraction} command: the positioning of two-digit
+% numbers either starting or ending with 1 will be corrected by the given
+% fraction of the width of a~1. For instance, |\onecorrection{.2}| works
+% great for AvantGarde. The values for other fonts must be set by
+% trial-and-error.
%
%
% \StopEventually{}
%
+%
% \section{The Code}
-% First of all we manage all options. This is done with a |\newif| for
+%
+% First of all we manage all options. This is done with a |\newif| for
% |alignspine|, and by defining suitably some macros representing the
-% alignment option for the cover, inside and back text. Default is |b|.
+% alignment option for the cover, inside and back text. Default is~|b|.
% All options we do not process are passed to the |article| class.
+%
% \begin{macrocode}
%<*class>
\newif\if@lignspine
@@ -275,41 +329,51 @@
\DeclareOption{covergraphics}{\def\@lignback{t}}
\DeclareOption{aligntop}%
- {\ExecuteOptions{aligncovertop,aligninsidetop,alignbacktop}}
+ {\ExecuteOptions{aligncovertop,
+ aligninsidetop,
+ alignbacktop}}
\DeclareOption{aligncovercenter}{\def\@ligncover{c}}
\DeclareOption{aligninsidecenter}{\def\@ligninside{c}}
\DeclareOption{alignbackcenter}{\def\@lignback{c}}
\DeclareOption{aligncenter}%
- {\ExecuteOptions{aligncovercenter,aligninsidecenter,alignbackcenter}}
+ {\ExecuteOptions{aligncovercenter,
+ aligninsidecenter,
+ alignbackcenter}}
\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
\ProcessOptions\relax
% \end{macrocode}
+%
% Now we load the |article| class and the |rotating| package, which is
% fundamental in typesetting the spine text.
+%
% \begin{macrocode}
\LoadClass{article}
\RequirePackage{rotating}
% \end{macrocode}
+%
% The |\onecorrection| command defines a the fraction used for
-% correcting the alignment of 1's. The default is 0.
+% correcting the alignment of 1's. The default is~0.
+%
% \begin{macrocode}
\DeclareRobustCommand*\onecorrection[1]{\def\onec@rrfrac{#1}}
\onecorrection{0}
% \end{macrocode}
-% Now we have all the font and text declaration commands. They
-% just define a certain macro to be their argument.
+%
+% Now we have all the font and text declaration commands. They just define
+% a certain macro to be their argument.
+%
% \begin{macrocode}
-\DeclareRobustCommand*\coverfont[1]{\def\coverf@nt{#1}}
-\DeclareRobustCommand*\backfont[1]{\def\backf@nt{#1}}
-\DeclareRobustCommand*\insidefont[1]{\def\insidef@nt{#1}}
-\DeclareRobustCommand*\spinefont[1]{\def\spinef@nt{#1}}
-\DeclareRobustCommand*\tracklistfont[1]{\def\tracklistf@nt{#1}}
-\DeclareRobustCommand*\infofont[1]{\def\infof@nt{#1}}
-\DeclareRobustCommand*\indexfont[1]{\def\indexf@nt{#1}}
+\DeclareRobustCommand*{\coverfont}[1]{\def\coverf@nt{#1}}
+\DeclareRobustCommand*{\backfont}[1]{\def\backf@nt{#1}}
+\DeclareRobustCommand*{\insidefont}[1]{\def\insidef@nt{#1}}
+\DeclareRobustCommand*{\spinefont}[1]{\def\spinef@nt{#1}}
+\DeclareRobustCommand*{\tracklistfont}[1]{\def\tracklistf@nt{#1}}
+\DeclareRobustCommand*{\infofont}[1]{\def\infof@nt{#1}}
+\DeclareRobustCommand*{\indexfont}[1]{\def\indexf@nt{#1}}
\DeclareRobustCommand{\lefttracklist}[1]{\def\lefttr@cklist{#1}}
\DeclareRobustCommand{\righttracklist}[1]{\def\righttr@cklist{#1}}
@@ -319,8 +383,10 @@
\DeclareRobustCommand{\backtext}[1]{\def\b@cktext{#1}}
\DeclareRobustCommand{\insidetext}[1]{\def\insid@text{#1}}
-\DeclareRobustCommand{\covergraphics}[1]{\def\c@vertext{#1}\def\c@vergraphics{}}
-\DeclareRobustCommand{\insidegraphics}[1]{\def\insid@text{#1}\def\insid@graphics{}}
+\DeclareRobustCommand{\covergraphics}[1]{%
+ \def\c@vertext{#1}\def\c@vergraphics{}}
+\DeclareRobustCommand{\insidegraphics}[1]{%
+ \def\insid@text{#1}\def\insid@graphics{}}
\DeclareRobustCommand*{\leftspine}[1]{\def\leftspin@{#1}}
\DeclareRobustCommand*{\centerspine}[1]{\def\centerspin@{#1}}
@@ -328,10 +394,24 @@
\DeclareRobustCommand*{\leftspinebis}[1]{\def\leftspin@bis{#1}}
\DeclareRobustCommand*{\centerspinebis}[1]{\def\centerspin@bis{#1}}
\DeclareRobustCommand*{\rightspinebis}[1]{\def\rightspin@bis{#1}}
+
+\DeclareRobustCommand*{\tracklistheight}[1]{%
+ \begingroup
+ \xdef\tr@cklistheight{#1}%
+ \@tempcnta=100
+ \advance\@tempcnta by -\tr@cklistheight
+ \xdef\c@vertextheight{\the\@tempcnta}%
+ \@tempcnta=12
+ \advance\@tempcnta by \tr@cklistheight
+ \xdef\c@verpos{\the\@tempcnta}%
+ \endgroup
+}
% \end{macrocode}
-% We do not want any |lineskip|, as stacked covers should not be separated by any
-% space. Analogously, we want no margins, no indentation and no hyphens. Offsets
-% will be set command by each command.
+%
+% We do not want any |lineskip|, as stacked covers should not be separated
+% by any space. Analogously, we want no margins, no indentation and no
+% hyphenation. Offsets will be set command by each command.
+%
% \begin{macrocode}
\evensidemargin=0cm
\oddsidemargin=0cm
@@ -349,242 +429,287 @@
\parskip=0pt
\parindent=0pt
\hyphenpenalty=10000
-% \end{macrocode}
-% We set the unit for the |picture| environment to 1mm, and prepare a number
-% of lengths which will be useful in aligning track numbers and spine text.
-% |\squ@re| holds the side length of the square framing the track numbers.
-% |\h@nging| is its hanging amount. |\@hstrip| and |\@wstrip| are used when aligning
-% the spine. |\winf@| and |\wtr@cklist| are the width of the information and
-% tracklist minipages.
+% \end{macrocode}
+%
+% We set the unit for the |picture| environment to 1\,mm and prepare a
+% number of lengths that will be useful in aligning track numbers and spine
+% text. |\squ@re| holds the side length of the square framing the track
+% numbers. |\h@nging| is its hanging amount. |\h@ngingg| is the hanging
+% amount of a track range. |\@hstrip| and |\@wstrip| are used when aligning
+% the spine. |\winf@| and |\wtr@cklist| are the width of the information
+% and tracklist minipages.
+%
% \begin{macrocode}
\setlength{\unitlength}{1mm}
\newlength{\squ@re}
\newlength{\@temp}
+\newlength{\@tempp}
+\newlength{\d@shwidth}
\newlength{\h@nging}
+\newlength{\h@ngingg}
\newlength{\@hstrip}
\newlength{\@wstrip}
\newlength{\winf@}
\newlength{\wtr@cklist}
\newlength{\onec@rrection}
-% \end{macrocode}
-% The |\track| command typesets a hanging framed box with a small number
-% inside. The number is given by a counter which is reset to 1 at each
+% \end{macrocode}
+%
+% The |\tr@ck| command typesets a hanging framed box with a small number
+% inside. The number is given by a counter that is reset to~1 at each
% |\makeback|, and can be changed manually with the |\setindex| command.
-% The alignment inside the small box will be corrected for numbers either starting
-% or ending with a 1 by the fraction of the width of 1 specified with the
-% |\onecorrection| command.
+% Two parameters makes it possible to set the hanging amount and the amount
+% of space that follows the box. The alignment inside the small box will be
+% corrected for numbers either starting or ending with a~1 by the fraction
+% of the width of~1 specified with the |\onecorrection| command. The
+% associated user commands are |\track| and |\trackrange|; the latter makes
+% it possible to typeset a range given its length.
+%
% \begin{macrocode}
\newcounter{tr@ckindex}
\DeclareRobustCommand*{\setindex}[1]{\setcounter{tr@ckindex}{#1}}
-\DeclareRobustCommand*{\track}{%
- \par
- \let\@firstdigit=\@empty
- \setlength{\onec@rrection}{0pt}%
- \settowidth{\@temp}{\indexf@nt1}
- \expandafter\@tfor \expandafter\@digit
- \expandafter:\expandafter=\number\value{tr@ckindex}\do {%
- \ifx\@firstdigit\@empty
- \let\@firstdigit=\@digit
- \else
- \if 1\@firstdigit
- \if 1\@digit\else
- \setlength{\onec@rrection}{-\onec@rrfrac\@temp}%
- \fi
- \else
- \if 1\@digit
- \setlength{\onec@rrection}{\onec@rrfrac\@temp}%
- \fi
- \fi
+\DeclareRobustCommand*{\tr@ck}[2]{%
+ \let\@firstdigit=\@empty
+ \setlength{\onec@rrection}{0pt}%
+ \settowidth{\@temp}{\indexf@nt1}%
+ \expandafter\@tfor \expandafter\@digit
+ \expandafter:\expandafter=\number\value{tr@ckindex}\do {%
+ \ifx\@firstdigit\@empty
+ \let\@firstdigit=\@digit
+ \else
+ \if 1\@firstdigit
+ \if 1\@digit\else
+ \setlength{\onec@rrection}{-\onec@rrfrac\@temp}%
\fi
- }%
- \settoheight{\@temp}{M}%
- \addtolength{\@temp}{-\squ@re}%
- \raisebox{.5\@temp}{%
- \setlength{\unitlength}{\squ@re}%
- \hspace*{-\h@nging}%
- \begin{picture}(1,1)
- \put(0,0){%
- \framebox(1,1){\hspace*{\onec@rrection}\indexf@nt\thetr@ckindex}%
- }
- \end{picture}%
- }%
- \hspace*{6pt}%
- \addtocounter{tr@ckindex}{1}%
+ \else
+ \if 1\@digit
+ \setlength{\onec@rrection}{\onec@rrfrac\@temp}%
+ \fi
+ \fi
+ \fi
+ }%
+ \setlength{\@temp}{\squ@re}%
+ \settoheight{\@tempp}{\tracklistf@nt M}%
+ \addtolength{\@temp}{-\@tempp}%
+ \raisebox{-.5\@temp}{%
+ \setlength{\unitlength}{\squ@re}%
+ \hspace*{-#1}%
+ \begin{picture}(1,1)
+ \put(0,0){%
+ \framebox(1,1){%
+ \hspace*{\onec@rrection}\indexf@nt\thetr@ckindex}%
+ }
+ \end{picture}%
+ }%
+ \hspace*{#2}%
+ \addtocounter{tr@ckindex}{1}%
+}
+
+\DeclareRobustCommand*{\track}{%
+ \par\tr@ck{\h@nging}{6pt}%
+}
+
+\DeclareRobustCommand*{\trackrange}[1]{%
+ \par
+ \tr@ck{\h@ngingg}{1pt}%
+ \addtocounter{tr@ckindex}{#1}%
+ \addtocounter{tr@ckindex}{-2}%
+ \settoheight{\@temp}{\indexf@nt M}%
+ \settoheight{\@tempp}{\tracklistf@nt M}%
+ \addtolength{\@temp}{-\@tempp}%
+ \raisebox{-.5\@temp}{\indexf@nt-}%
+ \hspace*{1pt}%
+ \tr@ck{0pt}{6pt}%
}
-% \end{macrocode}
-% We declare some utility commands which allow for easy font dimension
-% switch. The |\newcd| command resets to defaults all the fonts and
-% the text defaults.
+% \end{macrocode}
+%
+% We declare some utility commands that allow for easy font dimension
+% switch. The |\newcd| command resets font and text values to its default
+% values.
+%
% \begin{macrocode}
\AtBeginDocument{%
- \pagestyle{empty}%
- \thispagestyle{empty}%
- \newcd
+ \pagestyle{empty}%
+ \thispagestyle{empty}%
+ \newcd
}
\DeclareRobustCommand*{\fhb}[2]{%
- \fontsize{#1pt}{#2pt}\selectfont
- \parskip=.1\baselineskip
+ \fontsize{#1pt}{#2pt}\selectfont
+ \parskip=.1\baselineskip
}
-\DeclareRobustCommand*{\fh}[1]{\fontsize{#1pt}{\baselineskip}\selectfont}
+\DeclareRobustCommand*{\fh}[1]{%
+ \fontsize{#1pt}{\baselineskip}\selectfont
+}
\DeclareRobustCommand*{\newcd}{%
- \lefttracklist{}%
- \righttracklist{}%
- \covertext{}%
- \insidetext{}%
- \leftspine{}%
- \centerspine{}%
- \rightspine{}%
- \leftspinebis{\leftspin@}%
- \centerspinebis{\centerspin@}%
- \rightspinebis{\rightspin@}%
- \leftinfo{}%
- \rightinfo{}%
- \coverfont{\fhb{16}{19}}%
- \backfont{\coverf@nt}%
- \insidefont{\fhb{10}{12}}%
- \spinefont{\fhb{9}{11}\bfseries}%
- \tracklistfont{\fhb{9}{10.5}}%
- \infofont{\fhb{7}{8.3}}%
- \indexfont{\fhb{5}{0}}%
+ \lefttracklist{}%
+ \righttracklist{}%
+ \covertext{}%
+ \insidetext{}%
+ \leftspine{}%
+ \centerspine{}%
+ \rightspine{}%
+ \leftspinebis{\leftspin@}%
+ \centerspinebis{\centerspin@}%
+ \rightspinebis{\rightspin@}%
+ \leftinfo{}%
+ \rightinfo{}%
+ \coverfont{\fhb{16}{19}}%
+ \backfont{\coverf@nt}%
+ \insidefont{\fhb{10}{12}}%
+ \spinefont{\fhb{9}{11}\bfseries}%
+ \tracklistfont{\fhb{9}{10.5}}%
+ \infofont{\fhb{7}{8.3}}%
+ \indexfont{\fhb{5}{0}}%
+ \tracklistheight{70}%
}
-% \end{macrocode}
-% The following two commands are useful in alignment. The first command
-% decides the height and width of a given strip of text, to be inserted
-% in the spine. The point is that unless the |alignspine| option has been
-% requested, we do not set |\@hstrip|, which has been set previously to
-% the maximum height of a capital letter. The |\alignt@baseline| command is
-% used at the end of boxes which could be bottom aligned: it eliminates the
-% additional height inserted when a box last line has a descendant.
+% \end{macrocode}
+%
+% The following two commands are useful in alignment. The first command
+% decides the height and width of a given strip of text, to be inserted in
+% the spine. The point is that unless the |alignspine| option has been
+% requested, we do not set |\@hstrip|, which has been set previously to the
+% maximum height of a capital letter. The |\alignt@baseline| command is
+% used at the end of boxes that could be bottom aligned: it eliminates the
+% additional height inserted when a box's last line has a descender.
+%
% \begin{macrocode}
\DeclareRobustCommand*{\@sethwstrips}[1]{%
- \settowidth{\@wstrip}{\spinef@nt #1}%
- \if@lignspine
- \settoheight{\@hstrip}{\spinef@nt #1}%
- \fi
+ \settowidth{\@wstrip}{\spinef@nt #1}%
+ \if@lignspine
+ \settoheight{\@hstrip}{\spinef@nt #1}%
+ \fi
}
\DeclareRobustCommand*{\alignt@baseline}{%
- \settodepth{\@temp}{gjpqy}%
- \vphantom{gjpqy}\par
- \vspace*{-\@temp}\par
+ \settodepth{\@temp}{gjpqy}%
+ \vphantom{gjpqy}\par
+ \vspace*{-\@temp}\par
}
-% \end{macrocode}
-% It is now easy to write down the |\makecover| command. It is just a
-% matter of laying out the material, and print the requested crop marks.
+% \end{macrocode}
+%
+% It is now easy to write down the |\makecover| command. It is just a
+% matter of laying out the material and printing the requested crop marks.
+%
% \begin{macrocode}
\DeclareRobustCommand*{\makecover}[1][lrtb]{%
-\voffset=0in
-\begin{picture}(120,240)
-\end{picture}%
-\begin{rotate}{90}%
-\begin{picture}(240,120)
- \@tfor\cr@pmark := #1 \do {
- \if l\cr@pmark
- \put(-1,0){\line(-1,0){5}}
- \put(-1,120){\line(-1,0){5}}
- \else\if r\cr@pmark
- \put(241,0){\line(1,0){5}}
- \put(241,120){\line(1,0){5}}
- \else\if b\cr@pmark
- \put(0,-1){\line(0,-1){5}}
- \put(240,-1){\line(0,-1){5}}
- \put(120,-1){\line(0,-1){1}}
- \put(120,-3){\line(0,-1){1}}
- \put(120,-5){\line(0,-1){1}}
- \else\if t\cr@pmark
- \put(0,121){\line(0,1){5}}
- \put(240,121){\line(0,1){5}}
- \put(120,121){\line(0,1){1}}
- \put(120,123){\line(0,1){1}}
- \put(120,125){\line(0,1){1}}
- \else\if c\cr@pmark
- \put(0,0){\line(1,0){240}}
- \put(0,0){\line(0,1){120}}
- \put(120,0){\line(0,1){120}}
- \put(0,120){\line(1,0){240}}
- \put(240,0){\line(0,1){120}}
- \fi\fi\fi\fi\fi
- }
+ \voffset=0in
+ \begin{picture}(120,240)
+ \end{picture}%
+ \begin{rotate}{90}%
+ \begin{picture}(240,120)
+ \@tfor\cr@pmark := #1 \do {
+ \if l\cr@pmark
+ \put(-1,0){\line(-1,0){5}}
+ \put(-1,120){\line(-1,0){5}}
+ \else\if r\cr@pmark
+ \put(241,0){\line(1,0){5}}
+ \put(241,120){\line(1,0){5}}
+ \else\if b\cr@pmark
+ \put(0,-1){\line(0,-1){5}}
+ \put(240,-1){\line(0,-1){5}}
+ \put(120,-1){\line(0,-1){1}}
+ \put(120,-3){\line(0,-1){1}}
+ \put(120,-5){\line(0,-1){1}}
+ \else\if t\cr@pmark
+ \put(0,121){\line(0,1){5}}
+ \put(240,121){\line(0,1){5}}
+ \put(120,121){\line(0,1){1}}
+ \put(120,123){\line(0,1){1}}
+ \put(120,125){\line(0,1){1}}
+ \else\if c\cr@pmark
+ \put(0,0){\line(1,0){240}}
+ \put(0,0){\line(0,1){120}}
+ \put(120,0){\line(0,1){120}}
+ \put(0,120){\line(1,0){240}}
+ \put(240,0){\line(0,1){120}}
+ \fi\fi\fi\fi\fi
+ }
- \ifx\insid@graphics\@empty
+ \ifx\insid@graphics\@empty
\put(0,0){%
- \makebox(120,120)[\@ligninside]{%
- \parbox{12cm}{%
- \raggedright\insidef@nt\insid@text\alignt@baseline
- }%
- }%
- }
- \else
+ \makebox(120,120)[\@ligninside]{%
+ \parbox{12cm}{%
+ \raggedright
+ \insidef@nt
+ \insid@text
+ \alignt@baseline}}}
+ \else
\put(10,10){%
- \makebox(100,100)[\@ligninside]{%
- \parbox{10cm}{%
- \raggedright\insidef@nt\insid@text\alignt@baseline
- }%
- }%
- }
- \fi
- \ifx\c@vergraphics\@empty
+ \makebox(100,100)[\@ligninside]{%
+ \parbox{10cm}{%
+ \raggedright
+ \insidef@nt
+ \insid@text
+ \alignt@baseline}}}
+ \fi
+ \ifx\c@vergraphics\@empty
\put(120,0){%
- \makebox(120,120)[\@ligncover]{%
- \parbox{12cm}{%
- \raggedright\coverf@nt\c@vertext\alignt@baseline
- }%
- }%
- }
- \else
+ \makebox(120,120)[\@ligncover]{%
+ \parbox{12cm}{%
+ \raggedright
+ \coverf@nt
+ \c@vertext
+ \alignt@baseline}}}
+ \else
\put(130,10){%
- \makebox(100,100)[\@ligncover]{%
- \parbox{10cm}{%
- \raggedright\coverf@nt\c@vertext\alignt@baseline
- }%
- }%
- }
- \fi
-\end{picture}%
-\end{rotate}%
+ \makebox(100,100)[\@ligncover]{%
+ \parbox{10cm}{%
+ \raggedright
+ \coverf@nt
+ \c@vertext
+ \alignt@baseline}}}
+ \fi
+ \end{picture}%
+ \end{rotate}%
}
-% \end{macrocode}
-% The |\makeback| command is slightly more complicated, as it must
-% set up come values for the |\track| command to work. Moreover, it
-% has to check for empty right information or tracklist minipages, as
-% in this case the left ones must be enlarged, and it must try to use
-% the text from the cover page if no back text has been specified.
+% \end{macrocode}
+%
+% The |\makeback| command is slightly more complicated, as it must set up
+% come values for the |\track| command to work. Moreover, it has to check
+% for empty right information or tracklist minipages, as in this case the
+% left ones must be enlarged, and it must try to use the text from the cover
+% page if no back text has been specified.
+%
% \begin{macrocode}
\DeclareRobustCommand*{\makeback}[1][lrtb]{%
-\voffset=-.5in
-\setindex{1}%
-\settowidth{\squ@re}{\indexf@nt00}%
-\settoheight{\@temp}{\indexf@nt0}%
-\addtolength{\squ@re}{.4\@temp}%
-\setlength{\h@nging}{\squ@re}%
-\addtolength{\h@nging}{6pt}%
-\settoheight{\@hstrip}{\spinef@nt ABCDEFGHIJKLMNOPQRSTUVWXYZ}%
-%
-\ifx\righttr@cklist\@empty
+ \voffset=-.5in
+ \setindex{1}%
+ \settowidth{\d@shwidth}{\indexf@nt-}%
+ \settowidth{\squ@re}{\indexf@nt00}%
+ \settoheight{\@temp}{\indexf@nt0}%
+ \addtolength{\squ@re}{.4\@temp}%
+ \setlength{\h@nging}{\squ@re}%
+ \setlength{\h@ngingg}{\squ@re}%
+ \addtolength{\h@ngingg}{\squ@re}%
+ \addtolength{\h@ngingg}{\d@shwidth}%
+ \addtolength{\h@nging}{6pt}%
+ \addtolength{\h@ngingg}{8pt}%
+ \settoheight{\@hstrip}{\spinef@nt ABCDEFGHIJKLMNOPQRSTUVWXYZ}%
+%
+ \ifx\righttr@cklist\@empty
\setlength{\wtr@cklist}{12cm}%
-\else
+ \else
\setlength{\wtr@cklist}{5.5cm}%
-\fi
+ \fi
%
-\ifx\rightinf@\@empty
+ \ifx\rightinf@\@empty
\setlength{\winf@}{12cm}%
-\else
+ \else
\setlength{\winf@}{5.5cm}%
-\fi
+ \fi
%
-\begin{picture}(151,118)
+ \begin{picture}(151,118)
\@tfor\cr@pmark := #1 \do {
- \if l\cr@pmark
+ \if l\cr@pmark
\put(-1,0){\line(-1,0){5}}
\put(-1,118){\line(-1,0){5}}
- \else\if r\cr@pmark
+ \else\if r\cr@pmark
\put(152,0){\line(1,0){5}}
\put(152,118){\line(1,0){5}}
- \else\if b\cr@pmark
+ \else\if b\cr@pmark
\put(0,-1){\line(0,-1){5}}
\put(151,-1){\line(0,-1){5}}
\put(6.5,-1){\line(0,-1){1}}
@@ -593,7 +718,7 @@
\put(144.5,-1){\line(0,-1){1}}
\put(144.5,-3){\line(0,-1){1}}
\put(144.5,-5){\line(0,-1){1}}
- \else\if t\cr@pmark
+ \else\if t\cr@pmark
\put(0,119){\line(0,1){5}}
\put(151,119){\line(0,1){5}}
\put(6.5,119){\line(0,1){1}}
@@ -602,299 +727,315 @@
\put(144.5,119){\line(0,1){1}}
\put(144.5,121){\line(0,1){1}}
\put(144.5,123){\line(0,1){1}}
- \else\if c\cr@pmark
+ \else\if c\cr@pmark
\put(0,0){\line(1,0){151}}
\put(0,0){\line(0,1){118}}
\put(151,0){\line(0,1){118}}
\put(0,118){\line(1,0){151}}
\put(6.5,0){\line(0,1){118}}
\put(144.5,0){\line(0,1){118}}
- \fi\fi\fi\fi\fi
+ \fi\fi\fi\fi\fi
}
\@sethwstrips{\leftspin@}
\put(0,4){%
- \makebox(6.5,110)[b]{%
- \makebox[\@hstrip][r]{%
- \begin{rotate}{90}\spinef@nt\leftspin@\end{rotate}%
- }%
- }%
- }
+ \makebox(6.5,110)[b]{%
+ \makebox[\@hstrip][r]{%
+ \begin{rotate}{90}%
+ \spinef@nt
+ \leftspin@
+ \end{rotate}}}}
\@sethwstrips{\centerspin@}
\put(0,4){%
- \makebox(6.5,110){%
- \raisebox{0pt}[\@wstrip]{\makebox[\@hstrip][r]{%
- \begin{rotate}{90}\spinef@nt\centerspin@\end{rotate}%
- }}%
- }%
- }
+ \makebox(6.5,110){%
+ \raisebox{0pt}[\@wstrip]{%
+ \makebox[\@hstrip][r]{%
+ \begin{rotate}{90}%
+ \spinef@nt
+ \centerspin@
+ \end{rotate}}}}}
\@sethwstrips{\rightspin@}
\put(0,4){%
- \makebox(6.5,110)[t]{%
- \raisebox{0pt}[\@wstrip]{\makebox[\@hstrip][r]{%
- \begin{rotate}{90}\spinef@nt\rightspin@\end{rotate}%
- }}%
- }%
- }
+ \makebox(6.5,110)[t]{%
+ \raisebox{0pt}[\@wstrip]{%
+ \makebox[\@hstrip][r]{%
+ \begin{rotate}{90}%
+ \spinef@nt
+ \rightspin@
+ \end{rotate}}}}}
\@sethwstrips{\leftspin@bis}
\put(144.5,4){%
- \makebox(6.5,110)[t]{%
- \makebox[\@hstrip][l]{%
- \begin{rotate}{-90}\spinef@nt\leftspin@bis\end{rotate}%
- }%
- }%
- }
+ \makebox(6.5,110)[t]{%
+ \makebox[\@hstrip][l]{%
+ \begin{rotate}{-90}%
+ \spinef@nt
+ \leftspin@bis
+ \end{rotate}}}}
\@sethwstrips{\centerspin@bis}
\put(144.5,4){%
- \makebox(6.5,110){%
- \raisebox{\@wstrip}[\@wstrip]{\makebox[\@hstrip][l]{%
- \begin{rotate}{-90}\spinef@nt\centerspin@bis\end{rotate}%
- }}%
- }%
- }
+ \makebox(6.5,110){%
+ \raisebox{\@wstrip}[\@wstrip]{%
+ \makebox[\@hstrip][l]{%
+ \begin{rotate}{-90}%
+ \spinef@nt
+ \centerspin@bis
+ \end{rotate}}}}}
\@sethwstrips{\rightspin@bis}
\put(144.5,4){%
- \makebox(6.5,110)[b]{%
- \raisebox{\@wstrip}[\@wstrip]{\makebox[\@hstrip][l]{%
- \begin{rotate}{-90}\spinef@nt\rightspin@bis\end{rotate}%
- }}%
- }%
- }
+ \makebox(6.5,110)[b]{%
+ \raisebox{\@wstrip}[\@wstrip]{%
+ \makebox[\@hstrip][l]{%
+ \begin{rotate}{-90}%
+ \spinef@nt
+ \rightspin@bis
+ \end{rotate}}}}}
\put(17,0){%
- \begin{picture}(121,118)
- \put(0,82){%
- \makebox(120,30)[\@lignback]{%
- \parbox{12.1cm}{%
- \raggedright\backf@nt
- \ifx\b@cktext\undefined
- \ifx\c@vergraphics\@empty\else\c@vertext\fi
- \else
- \b@cktext
- \fi
- \alignt@baseline
- }%
- }%
- }
-
- \put(0,5){%
- \makebox(55,70)[tl]{%
- \begin{minipage}{\wtr@cklist}%
- \lineskip=.5pt\lineskiplimit=1pt\raggedright
- \tracklistf@nt\lefttr@cklist
- \end{minipage}%
- }%
- }
-
- \put(65,5){%
- \makebox(55,70)[tl]{%
- \begin{minipage}{\wtr@cklist}%
- \lineskip=.5pt\lineskiplimit=1pt\raggedright
- \tracklistf@nt\righttr@cklist
- \end{minipage}%
- }%
- }
-
- \put(0,5){%
- \makebox(0,0)[bl]{%
- \parbox{\winf@}{%
- \raggedright\infof@nt\leftinf@\alignt@baseline
- }%
- }%
- }
-
- \put(65,5){%
- \makebox(0,0)[bl]{%
- \parbox{\winf@}{%
- \raggedright\infof@nt\rightinf@\alignt@baseline
- }%
- }%
- }
+ \begin{picture}(121,118)
+ \put(0,\c@verpos){%
+ \makebox(120,\c@vertextheight)[\@lignback]{%
+ \parbox{12.1cm}{%
+ \raggedright
+ \backf@nt
+ \ifx\b@cktext\undefined
+ \ifx\c@vergraphics\@empty\else\c@vertext\fi
+ \else
+ \b@cktext
+ \fi
+ \alignt@baseline}}}
- \end{picture}%
- }
+ \put(0,5){%
+ \makebox(55,\tr@cklistheight)[tl]{%
+ \begin{minipage}{\wtr@cklist}%
+ \lineskip=.5pt
+ \lineskiplimit=1pt
+ \raggedright
+ \tracklistf@nt
+ \lefttr@cklist
+ \end{minipage}}}
+
+ \put(65,5){%
+ \makebox(55,\tr@cklistheight)[tl]{%
+ \begin{minipage}{\wtr@cklist}%
+ \lineskip=.5pt
+ \lineskiplimit=1pt
+ \raggedright
+ \tracklistf@nt
+ \righttr@cklist
+ \end{minipage}}}
-\end{picture}%
+ \put(0,5){%
+ \makebox(0,0)[bl]{%
+ \parbox{\winf@}{%
+ \raggedright
+ \infof@nt
+ \leftinf@
+ \alignt@baseline}}}
+
+ \put(65,5){%
+ \makebox(0,0)[bl]{%
+ \parbox{\winf@}{%
+ \raggedright
+ \infof@nt
+ \rightinf@
+ \alignt@baseline}}}
+ \end{picture}%
+ }
+ \end{picture}%
}
-% \end{macrocode}
-% The |\makeslimcover| command is essentially a mix of the previous two, as a single slim
-% cover must contain the front matter and the track lists. Note that we have much less space.
+% \end{macrocode}
+%
+% The |\makeslimcover| command is essentially a mix of the previous two, as
+% a single slim cover must contain the front matter and the track lists.
+% Note that we have much less space.
+%
% \begin{macrocode}
\DeclareRobustCommand*{\makeslimcover}[1][lrtb]{%
-\voffset=0in
-\setindex{1}%
-\settowidth{\squ@re}{\indexf@nt00}%
-\settoheight{\@temp}{\indexf@nt0}%
-\addtolength{\squ@re}{.4\@temp}%
-\setlength{\h@nging}{\squ@re}%
-\addtolength{\h@nging}{6pt}%
-\settoheight{\@hstrip}{\spinef@nt ABCDEFGHIJKLMNOPQRSTUVWXYZ}%
-%
-\ifx\righttr@cklist\@empty
+ \voffset=0in
+ \setindex{1}%
+ \settowidth{\d@shwidth}{\indexf@nt-}%
+ \settowidth{\squ@re}{\indexf@nt00}%
+ \settoheight{\@temp}{\indexf@nt0}%
+ \addtolength{\squ@re}{.4\@temp}%
+ \setlength{\h@nging}{\squ@re}%
+ \setlength{\h@ngingg}{\squ@re}%
+ \addtolength{\h@ngingg}{\squ@re}%
+ \addtolength{\h@ngingg}{\d@shwidth}%
+ \addtolength{\h@nging}{6pt}%
+ \addtolength{\h@ngingg}{8pt}%
+ \settoheight{\@hstrip}{\spinef@nt ABCDEFGHIJKLMNOPQRSTUVWXYZ}%
+%
+ \ifx\righttr@cklist\@empty
\setlength{\wtr@cklist}{10cm}%
-\else
+ \else
\setlength{\wtr@cklist}{4.7cm}%
-\fi
+ \fi
%
-\ifx\rightinf@\@empty
+ \ifx\rightinf@\@empty
\setlength{\winf@}{10cm}%
-\else
+ \else
\setlength{\winf@}{4.7cm}%
-\fi
+ \fi
%
-\begin{picture}(120,240)
-\end{picture}%
-\begin{rotate}{90}%
-\begin{picture}(240,120)
- \@tfor\cr@pmark := #1 \do {
- \if l\cr@pmark
- \put(-1,0){\line(-1,0){5}}
- \put(-1,120){\line(-1,0){5}}
- \else\if r\cr@pmark
- \put(241,0){\line(1,0){5}}
- \put(241,120){\line(1,0){5}}
- \else\if b\cr@pmark
- \put(0,-1){\line(0,-1){5}}
- \put(240,-1){\line(0,-1){5}}
- \put(120,-1){\line(0,-1){1}}
- \put(120,-3){\line(0,-1){1}}
- \put(120,-5){\line(0,-1){1}}
- \else\if t\cr@pmark
- \put(0,121){\line(0,1){5}}
- \put(240,121){\line(0,1){5}}
- \put(120,121){\line(0,1){1}}
- \put(120,123){\line(0,1){1}}
- \put(120,125){\line(0,1){1}}
- \else\if c\cr@pmark
- \put(0,0){\line(1,0){240}}
- \put(0,0){\line(0,1){120}}
- \put(120,0){\line(0,1){120}}
- \put(0,120){\line(1,0){240}}
- \put(240,0){\line(0,1){120}}
- \fi\fi\fi\fi\fi
- }
+ \begin{picture}(120,240)
+ \end{picture}%
+ \begin{rotate}{90}%
+ \begin{picture}(240,120)
+ \@tfor\cr@pmark := #1 \do {
+ \if l\cr@pmark
+ \put(-1,0){\line(-1,0){5}}
+ \put(-1,120){\line(-1,0){5}}
+ \else\if r\cr@pmark
+ \put(241,0){\line(1,0){5}}
+ \put(241,120){\line(1,0){5}}
+ \else\if b\cr@pmark
+ \put(0,-1){\line(0,-1){5}}
+ \put(240,-1){\line(0,-1){5}}
+ \put(120,-1){\line(0,-1){1}}
+ \put(120,-3){\line(0,-1){1}}
+ \put(120,-5){\line(0,-1){1}}
+ \else\if t\cr@pmark
+ \put(0,121){\line(0,1){5}}
+ \put(240,121){\line(0,1){5}}
+ \put(120,121){\line(0,1){1}}
+ \put(120,123){\line(0,1){1}}
+ \put(120,125){\line(0,1){1}}
+ \else\if c\cr@pmark
+ \put(0,0){\line(1,0){240}}
+ \put(0,0){\line(0,1){120}}
+ \put(120,0){\line(0,1){120}}
+ \put(0,120){\line(1,0){240}}
+ \put(240,0){\line(0,1){120}}
+ \fi\fi\fi\fi\fi
+ }
- \put(12,10){%
- \begin{picture}(100,100)
- \put(0,80){%
- \makebox(100,30)[\@lignback]{%
- \parbox{10.1cm}{%
- \raggedright\backf@nt
- \ifx\b@cktext\undefined
- \ifx\c@vergraphics\@empty\else\c@vertext\fi
- \else
- \b@cktext
- \fi
- \alignt@baseline
- }%
- }%
- }
-
- \put(0,15){%
- \makebox(47,60)[tl]{%
- \begin{minipage}{\wtr@cklist}%
- \lineskip=.5pt\lineskiplimit=1pt\raggedright
- \tracklistf@nt\lefttr@cklist
- \end{minipage}%
- }%
- }
-
- \put(55,15){%
- \makebox(47,60)[tl]{%
- \begin{minipage}{\wtr@cklist}%
- \lineskip=.5pt\lineskiplimit=1pt\raggedright
- \tracklistf@nt\righttr@cklist
- \end{minipage}%
- }%
- }
-
- \put(0,0){%
- \makebox(0,0)[bl]{%
- \parbox{\winf@}{%
- \raggedright\infof@nt\leftinf@\alignt@baseline
- }%
- }%
- }
-
- \put(55,0){%
- \makebox(0,0)[bl]{%
- \parbox{\winf@}{%
- \raggedright\infof@nt\rightinf@\alignt@baseline
- }%
- }%
- }
+ \put(11,0){%
+ \begin{picture}(100,120)
+ \put(0,\c@verpos){%
+ \makebox(100,\c@vertextheight)[\@lignback]{%
+ \parbox{10.1cm}{%
+ \raggedright
+ \backf@nt
+ \ifx\b@cktext\undefined
+ \ifx\c@vergraphics\@empty\else\c@vertext\fi
+ \else
+ \b@cktext
+ \fi
+ \alignt@baseline}}}
+
+ \put(0,5){%
+ \makebox(47,\tr@cklistheight)[tl]{%
+ \begin{minipage}{\wtr@cklist}%
+ \lineskip=.5pt
+ \lineskiplimit=1pt
+ \raggedright
+ \tracklistf@nt
+ \lefttr@cklist
+ \end{minipage}}}
+
+ \put(55,5){%
+ \makebox(47,\tr@cklistheight)[tl]{%
+ \begin{minipage}{\wtr@cklist}%
+ \lineskip=.5pt
+ \lineskiplimit=1pt
+ \raggedright
+ \tracklistf@nt
+ \righttr@cklist
+ \end{minipage}}}
+
+ \put(0,5){%
+ \makebox(0,0)[bl]{%
+ \parbox{\winf@}{%
+ \raggedright
+ \infof@nt
+ \leftinf@
+ \alignt@baseline}}}
+ \put(55,5){%
+ \makebox(0,0)[bl]{%
+ \parbox{\winf@}{%
+ \raggedright
+ \infof@nt
+ \rightinf@
+ \alignt@baseline}}}
\end{picture}%
- }
- \ifx\c@vergraphics\@empty
+ }
+ \ifx\c@vergraphics\@empty
\put(120,0){%
- \makebox(120,120)[\@ligncover]{%
- \parbox{12cm}{%
- \raggedright\coverf@nt\c@vertext\alignt@baseline
- }%
- }%
- }
- \else
+ \makebox(120,120)[\@ligncover]{%
+ \parbox{12cm}{%
+ \raggedright
+ \coverf@nt
+ \c@vertext
+ \alignt@baseline}}}
+ \else
\put(130,10){%
- \makebox(100,100)[\@ligncover]{%
- \parbox{10cm}{%
- \raggedright\coverf@nt\c@vertext\alignt@baseline
- }%
- }%
- }
- \fi
-\end{picture}%
-\end{rotate}%
+ \makebox(100,100)[\@ligncover]{%
+ \parbox{10cm}{%
+ \raggedright
+ \coverf@nt
+ \c@vertext
+ \alignt@baseline}}}
+ \fi
+ \end{picture}%
+ \end{rotate}%
}
-% \end{macrocode}
-% Finally, we have the high-level commands that allow to produce
-% one or several CD from data files, |\makeCD|, |\makelist|, |\makeslimCD| and |\makeslimlist|.
-% All have an additional argument for the file name, defaulting
-% to |\jobname.dat| or |\jobname.lst|.
-%
-% Two separate commands factor out the checks and the user interaction in case the file
-% is not specified or does not exist.
-%
-% A data file must contain only text declaration commands from the
-% |CD| class. All \LaTeX{} stuff (preamble, etc.) and cover generation
-% commands are handled automatically. A list file must contain a number
-% of lines, each containing a data file name.
+% \end{macrocode}
+%
+% Finally, we have the high-level commands that allow to produce one or
+% several CD from data files, |\makeCD|, |\makelist|, |\makeslimCD| and
+% |\makeslimlist|. All have an additional argument for the file name,
+% defaulting to |\jobname.dat| or |\jobname.lst|.
+%
+% Two separate commands factor out the checks and the user interaction in
+% case the file is not specified or does not exist.
+%
+% A data file must contain only text declaration commands from the |CD|
+% class. All \LaTeX{} stuff (preamble, etc.) and cover generation commands
+% are handled automatically. A list file must contain a number of lines,
+% each containing a data file name.
+%
% \begin{macrocode}
\DeclareRobustCommand*{\@skCDfile}[1]{%
-\def\CDname{#1}%
-\ifx\CDname\@empty
+ \def\CDname{#1}%
+ \ifx\CDname\@empty
\IfFileExists{\jobname.dat}{%
- \def\CDname{\jobname.dat}%
+ \def\CDname{\jobname.dat}%
}{%
- \typein[\CDname]{Please insert CD data file name:}%
+ \typein[\CDname]{Please insert CD data file name:}%
}%
-\fi
-\InputIfFileExists{\CDname.dat}{%
-}{%
+ \fi
+ \InputIfFileExists{\CDname.dat}{%
+ }{%
\InputIfFileExists{\CDname}{%
}{%
- \ClassError{cd}{CD data file (\CDname.dat or \CDname) not found}{}%
- }
-}%
+ \ClassError{cd}
+ {CD data file (\CDname.dat or \CDname) not found}
+ {}%
+ }%
+ }%
}
\DeclareRobustCommand*{\makeCD}[1][]{%
-\@skCDfile{#1}\makecover\par\makeback\par
+ \@skCDfile{#1}%
+ \makecover\par
+ \makeback\par
}
\DeclareRobustCommand*{\makeslimCD}[1][]{%
-\@skCDfile{#1}\makeslimcover\par
+ \@skCDfile{#1}%
+ \makeslimcover\par
}
\newread\CDlist
@@ -905,80 +1046,91 @@
\newif\ifne@f
\DeclareRobustCommand*{\@sklistfile}[1]{%
-\def\CDlistname{#1}%
-\ifx\CDlistname\@empty
+ \def\CDlistname{#1}%
+ \ifx\CDlistname\@empty
\IfFileExists{\jobname.lst}{%
- \def\CDlistname{\jobname.lst}%
+ \def\CDlistname{\jobname.lst}%
}{%
- \typein[\CDlistname]{Please insert CD list file name:}
+ \typein[\CDlistname]{Please insert CD list file name:}
}%
-\fi
-\IfFileExists{\CDlistname.lst}{%
+ \fi
+ \IfFileExists{\CDlistname.lst}{%
\immediate\openin\CDlist=\CDlistname.lst
+ }{%
+ \IfFileExists{\CDlistname}{%
+ \immediate\openin\CDlist=\CDlistname
}{%
- \IfFileExists{\CDlistname}{%
- \immediate\openin\CDlist=\CDlistname
- }{%
- \ClassError{cd}{CD list (\CDlistname.lst or \CDlistname) not found}{}%
- }
- }
-\ne@ftrue
+ \ClassError{cd}
+ {CD list (\CDlistname.lst or \CDlistname) not found}
+ {}%
+ }%
+ }%
+ \ne@ftrue
}
\DeclareRobustCommand*{\makelist}[1][]{%
-\@sklistfile{#1}%
-\advance\endlinechar\@M
-\immediate\read\CDlist to \CDname
-\advance\endlinechar-\@M
-\ifeof\CDlist\ne@ffalse\fi
+ \@sklistfile{#1}%
+ \advance\endlinechar\@M
+ \immediate\read\CDlist to \CDname
+ \advance\endlinechar-\@M
+ \ifeof\CDlist\ne@ffalse\fi
%
-\@whilesw \ifne@f \fi {%
+ \@whilesw \ifne@f \fi {%
\newcd
\InputIfFileExists{\CDname.dat}{%
}{%
- \InputIfFileExists{\CDname}{%
- }{%
- \ClassError{cd}{CD data file (\CDname.dat or \CDname) not found}{}%
- }%
+ \InputIfFileExists{\CDname}{%
+ }{%
+ \ClassError{cd}
+ {CD data file (\CDname.dat or \CDname) not found}
+ {}%
+ }%
}%
\advance\endlinechar\@M
\immediate\read\CDlist to \CDname
\advance\endlinechar-\@M
\ifeof\CDlist\ne@ffalse\fi
\ifodd\value{@cd}%
- \makeback[lrb]\par\makecover\par
+ \makeback[lrb]\par
+ \makecover\par
\else
- \makecover\par\ifne@f\makeback[lrt]\else\makeback\fi\par
+ \makecover\par
+ \ifne@f\makeback[lrt]\else\makeback\fi\par
\fi
\addtocounter{@cd}{1}%
-}
+ }%
}
\DeclareRobustCommand*{\makeslimlist}[1][]{%
-\@sklistfile{#1}%
-\advance\endlinechar\@M
-\immediate\read\CDlist to \CDname
-\advance\endlinechar-\@M
-\ifeof\CDlist\ne@ffalse\fi
+ \@sklistfile{#1}%
+ \advance\endlinechar\@M
+ \immediate\read\CDlist to \CDname
+ \advance\endlinechar-\@M
+ \ifeof\CDlist\ne@ffalse\fi
%
-\@whilesw \ifne@f \fi {%
+ \@whilesw \ifne@f \fi {%
\newcd
\InputIfFileExists{\CDname.dat}{%
}{%
- \InputIfFileExists{\CDname}{%
- }{%
- \ClassError{cd}{CD data file (\CDname.dat or \CDname) not found}{}%
- }%
+ \InputIfFileExists{\CDname}{%
+ }{%
+ \ClassError{cd}
+ {CD data file (\CDname.dat or \CDname) not found}
+ {}%
+ }%
}%
\advance\endlinechar\@M
\immediate\read\CDlist to \CDname
\advance\endlinechar-\@M
\ifeof\CDlist\ne@ffalse\fi
\makeslimcover\par
+ }%
}
-}
-
%</class>
% \end{macrocode}
% \Finale
%
+% \PrintChanges
+% \addcontentsline{toc}{section}{Change History}
+
+\endinput