plautopatch (21aug18)

git-svn-id: svn://tug.org/texlive/trunk@48447 c570f23f-e606-0410-a88d-b1316a301751

7 files changed, 366 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/plautopatch/LICENSE b/Master/texmf-dist/doc/latex/plautopatch/LICENSE
new file mode 100644
index 00000000000..09610e6994e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/LICENSE
@@ -0,0 +1,27 @@
+Copyright (c) 2018 Hironobu Yamashita
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+
+* Neither the name of the copyright holder nor the names of its contributors
+  may be used to endorse or promote products derived from this software
+  without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/Master/texmf-dist/doc/latex/plautopatch/Makefile b/Master/texmf-dist/doc/latex/plautopatch/Makefile
new file mode 100644
index 00000000000..5f2ef4e5d65
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/Makefile
@@ -0,0 +1,26 @@
+KANJI = -kanji=utf8
+FONTMAP = -f ipaex.map -f ptex-ipaex.map
+TEXMF = $(shell kpsewhich -var-value=TEXMFHOME)
+
+all: plautopatch.pdf plautopatch-ja.pdf
+
+.SUFFIXES: .tex .dvi .pdf
+.tex.dvi:
+	platex $(KANJI) $<
+	platex $(KANJI) $<
+	rm *.aux *.log
+.dvi.pdf:
+	dvipdfmx $(FONTMAP) $<
+
+.PHONY: install clean
+install:
+	mkdir -p ${TEXMF}/doc/platex/plautopatch
+	cp ./Makefile ${TEXMF}/doc/platex/plautopatch/
+	cp ./LICENSE ${TEXMF}/doc/platex/plautopatch/
+	cp ./README.md ${TEXMF}/doc/platex/plautopatch/
+	cp ./*.pdf ${TEXMF}/doc/platex/plautopatch/
+	cp ./*.tex ${TEXMF}/doc/platex/plautopatch/
+	mkdir -p ${TEXMF}/tex/platex/plautopatch
+	cp ./*.sty ${TEXMF}/tex/platex/plautopatch/
+clean:
+	rm -f *.dvi *.pdf
diff --git a/Master/texmf-dist/doc/latex/plautopatch/README.md b/Master/texmf-dist/doc/latex/plautopatch/README.md
new file mode 100644
index 00000000000..b9710306da9
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/README.md
@@ -0,0 +1,63 @@
+# plautopatch
+
+Japanese pLaTeX/upLaTeX formats and packages often conflict
+with other LaTeX packages which are aware of pLaTeX/upLaTeX.
+In the worst case, such packages throw an fatal error or
+end up with a wrong output.
+
+The goal of this package "plautopatch" is that
+there is no need to worry about such incompatibilities,
+by automatically loading specific patches
+when they are necessary.
+This helps not only to simplify source files, but also
+to make the appearance of working pLaTeX/upLaTeX sources
+similar to that of ordinally LaTeX ones.
+
+The following patches are currently registered:
+
+- tracefnt (latex) -> ptrace/uptrace (platex/uplatex)
+- fltrace (latex) -> pfltrace (platex)
+- array (latex-tools) -> plarray (platex-tools)
+- array (latex-tools) + plext (platex) -> plextarray (platex-tools)
+- delarray (latex-tools) + plext (platex) -> plextdelarray (platex-tools)
+- everysel (ms) -> pxeverysel (platex-tools)
+- everyshi (ms) -> pxeveryshi (platex-tools)
+- atbegshi (oberdiek) -> pxatbegshi (platex-tools)
+- ftnright (latex-tools) -> pxftnright (platex-tools)
+- pdfpages -> pxpdfpages (maintained here!)
+
+## Requirements
+
+This package depends on "filehook" package,
+written by Martin Scharrer.
+
+## Miscellaneous
+
+This bundle may distribute some tiny patches
+together with the main package. Short information:
+
+- pxpdfpages.sty:
+    Patch for pdfpages.sty (by An­dreas Matthias) to support
+    Japanese-style crop marks (called 'tombow' in Japanese).
+    Can be used on pLaTeX/upLaTeX.
+
+## Installation
+
+- *.sty -> $TEXMF/tex/platex/plautopatch
+- *.tex, *.pdf -> $TEXMF/doc/platex/plautopatch
+
+## Repository
+
+The bundle is maintained on GitHub:
+  https://github.com/aminophen/plautopatch
+
+## License
+
+The bundle may be distributed and/or modified under the terms of
+the 3-clause BSD license (see [LICENSE](./LICENSE)).
+
+## Release Date
+
+2018-08-21
+
+Hironobu Yamashita
diff --git a/Master/texmf-dist/doc/latex/plautopatch/plautopatch-ja.pdf b/Master/texmf-dist/doc/latex/plautopatch/plautopatch-ja.pdf
new file mode 100644
index 00000000000..605c28aa675
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/plautopatch-ja.pdf
diff --git a/Master/texmf-dist/doc/latex/plautopatch/plautopatch-ja.tex b/Master/texmf-dist/doc/latex/plautopatch/plautopatch-ja.tex
new file mode 100644
index 00000000000..4ca3580f8f1
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/plautopatch-ja.tex
@@ -0,0 +1,124 @@
+%# -*- coding: utf-8 -*-
+\ifx\epTeXinputencoding\undefined\else % defined in e-pTeX (> TL2016)
+  \epTeXinputencoding utf8    % ensure utf-8 encoding for platex
+\fi
+
+\documentclass[a4paper]{jsarticle}
+\usepackage{doc}
+\usepackage{plautopatch}% load this here to make \GetFileInfo work
+\GetFileInfo{plautopatch.sty}
+\title{Package \textsf{plautopatch} \fileversion}
+\author{Hironobu Yamashita}
+\date{\filedate}
+\begin{document}
+
+\maketitle
+
+日本のp\LaTeX/up\LaTeX{}フォーマットや専用パッケージが、
+これらを知らない\LaTeX{}パッケージ（しばしば海外で作られた
+汎用のもの）と衝突することがあります。
+最悪の場合にはエラーが出たり、誤った出力が得られたり
+することがあります。
+
+この\textsf{plautopatch}の目的は、こうした非互換を意識せずに
+済むようにすることです。具体的には、p\LaTeX/up\LaTeX{}と
+衝突するパッケージが使われた場合に、その衝突を解消するパッチを
+提供するパッケージを必要に応じて自動的に読み込みます。
+こうすることで、ソースコードを簡潔にできるだけでなく、
+p\LaTeX/up\LaTeX{}で動作するソースと通常の\LaTeX{}ソースの
+見た目を近づけることができます。
+
+このパッケージはGitHubで開発しています。
+\begin{verbatim}
+    https://github.com/aminophen/plautopatch
+\end{verbatim}
+
+\section*{動作条件}
+
+このパッケージは
+\textsf{filehook}パッケージ（Martin Scharrer氏の作）に依存します。
+
+\section*{使い方}
+
+このパッケージを\LaTeX{}ソースの冒頭で読み込みます。
+このために、\verb+\RequirePackage{plautopatch}+を
+\verb+\documentclass+や他のコマンドよりも\emph{前}に
+読み込むことをお勧めします
+（クラスファイルなどが問題のあるパッケージを読み込む可能性もあるため）。
+
+例を示します。
+\begin{verbatim}
+  %\RequirePackage{plautopatch}
+  \documentclass{tarticle}% 縦組クラス（plext使用）
+  \usepackage{array}% plextと非互換
+  \begin{document}
+  ...
+  \end{document}
+\end{verbatim}
+上記の例では、
+\textsf{tarticle}クラスが内部で読み込む\textsf{plext}パッケージと、
+ソース中で\verb+\usepackage+している\textsf{array}パッケージが
+衝突してエラーになる場合があります。しかし、冒頭で
+\verb+\RequirePackage{plautopatch}+とだけ書いておけば、
+\textsf{array}パッケージの時点で\textsf{plextarray}パッケージが
+追加で読み込まれるため、問題が解消します。
+このように自動追加されたパッケージは、\verb+\end{document}+の
+時点で次のように一覧として表示されます（複数の場合は
+コンマと空白で区切ったリストになります）。
+\begin{verbatim}
+***** List of packages loaded by `plautopatch': *****
+ plextarray.
+*****************************************************
+\end{verbatim}
+
+\section*{現在対応しているパッケージの一覧}
+
+\def\ITEMoo#1 (#2) -> #3 (#4){%
+  \item \textsf{#1} (\textsf{#2})\\
+    $\rightarrow$ \textsf{#3} (\textsf{#4})}
+\def\ITEMooo#1 (#2) + #3 (#4) -> #5 (#6){%
+  \item \textsf{#1} (\textsf{#2}) + \textsf{#3} (\textsf{#4})\\
+    $\rightarrow$ \textsf{#5} (\textsf{#6})}
+\def\ITEM#1 -> #2 {%
+  \item \textsf{#1}\\
+    $\rightarrow$ \textsf{#2} }
+
+凡例：
+\begin{itemize}
+\item \texttt{<元のパッケージ>} (\texttt{<元が含まれるバンドル名>})\\
+  \texttt{<パッチのパッケージ>} (\texttt{<パッチが含まれるバンドル名>})
+\end{itemize}
+
+現在のバージョン (\filedate\space\fileversion) がサポートしているのは
+下記のパッケージです。
+\begin{itemize}
+\ITEMoo  tracefnt (latex) -> ptrace/uptrace (platex/uplatex)
+\ITEMoo  fltrace (latex) -> pfltrace (platex)
+\ITEMoo  array (latex-tools) -> plarray (platex-tools)
+\ITEMooo array (latex-tools) + plext (platex) -> plextarray (platex-tools)
+\ITEMooo delarray (latex-tools) + plext (platex) -> plextdelarray (platex-tools)
+\ITEMoo  everysel (ms) -> pxeverysel (platex-tools)
+\ITEMoo  everyshi (ms) -> pxeveryshi (platex-tools)
+\ITEMoo  atbegshi (oberdiek) -> pxatbegshi (platex-tools)
+\ITEMoo  ftnright (latex-tools) -> pxftnright (platex-tools)
+\ITEM    pdfpages -> pxpdfpages (maintained here!)
+\end{itemize}
+もちろん、このリストは随時、追加・削除・置き換えていく予定です。
+互換性の問題や追加したいパッケージがある場合はご一報ください。
+
+\section*{特定のパッケージを除外したい場合}
+
+デフォルトでは、上記のリストに登録されている\texttt{<元のパッケージ>}が
+使われたことを検出すると、全て自動的にパッチを読み込みます。
+しかし、時にはこれが逆効果となり、問題が起きる可能性は否定できません。
+そのような場合は
+\begin{verbatim}
+    \plautopatchdisable{<元のパッケージ>}
+\end{verbatim}
+と書くことで、そのパッケージを検出対象から除外します。複数ある場合は
+\begin{verbatim}
+    \plautopatchdisable{<元のパッケージ1>,<元のパッケージ2>}
+\end{verbatim}
+のようにコンマで区切っていくつでも除外できます。
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/plautopatch/plautopatch.pdf b/Master/texmf-dist/doc/latex/plautopatch/plautopatch.pdf
new file mode 100644
index 00000000000..6eb94b17475
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/plautopatch.pdf
diff --git a/Master/texmf-dist/doc/latex/plautopatch/plautopatch.tex b/Master/texmf-dist/doc/latex/plautopatch/plautopatch.tex
new file mode 100644
index 00000000000..58b514d8834
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/plautopatch/plautopatch.tex
@@ -0,0 +1,126 @@
+%# -*- coding: utf-8 -*-
+\ifx\epTeXinputencoding\undefined\else % defined in e-pTeX (> TL2016)
+  \epTeXinputencoding utf8    % ensure utf-8 encoding for platex
+\fi
+
+\documentclass[a4paper]{jsarticle}
+\usepackage{doc}
+\usepackage{plautopatch}% load this here to make \GetFileInfo work
+\GetFileInfo{plautopatch.sty}
+\title{Package \textsf{plautopatch} \fileversion}
+\author{Hironobu Yamashita}
+\date{\filedate}
+\begin{document}
+
+\maketitle
+
+Japanese p\LaTeX/up\LaTeX\ formats and packages often conflict
+with other \LaTeX\ packages which are aware of p\LaTeX/up\LaTeX.
+In the worst case, such packages throw an fatal error or
+end up with a wrong output.
+
+The goal of this package \textsf{plautopatch} is that
+there is no need to worry about such incompatibilities,
+by automatically loading specific patches
+when they are necessary.
+This helps not only to simplify source files, but also
+to make the appearance of working p\LaTeX/up\LaTeX\ sources
+similar to that of ordinally \LaTeX\ ones.
+
+The package is maintained on GitHub:
+\begin{verbatim}
+    https://github.com/aminophen/plautopatch
+\end{verbatim}
+
+\section*{Requirements}
+
+This package depends on \textsf{filehook} package,
+written by Martin Scharrer.
+
+\section*{Usage}
+
+Load this package at the very beginning of the \LaTeX\ source.
+It is strongly recommended to use
+\verb+\RequirePackage{plautopatch}+
+before \verb+\documentclass+ or any other commands,
+as such other classes and packages may load
+some problematic packages internally.
+
+Here is an example:
+\begin{verbatim}
+  %\RequirePackage{plautopatch}
+  \documentclass{tarticle}% vertical writing (requires plext)
+  \usepackage{array}% incompatible with plext
+  \begin{document}
+  ...
+  \end{document}
+\end{verbatim}
+In the above example, the class \textsf{tarticle} internally
+requires the package \textsf{plext}.
+However, \textsf{array} explicitly required by \verb+\usepackage+
+conflicts with \textsf{plext}.
+By using \verb+\RequirePackage{plautopatch}+,
+\textsf{plextarray} is automatically loaded and the problem goes.
+The list of automatically-loaded packages is shown at
+\verb+\end{document}+:
+\begin{verbatim}
+***** List of packages loaded by `plautopatch': *****
+ plextarray.
+*****************************************************
+\end{verbatim}
+When multiple packages are loaded, they are all printed
+as a list separated by commas and spaces.
+
+\section*{List of currently available patches}
+
+\def\ITEMoo#1 (#2) -> #3 (#4){%
+  \item \textsf{#1} (\textsf{#2})\\
+    $\rightarrow$ \textsf{#3} (\textsf{#4})}
+\def\ITEMooo#1 (#2) + #3 (#4) -> #5 (#6){%
+  \item \textsf{#1} (\textsf{#2}) + \textsf{#3} (\textsf{#4})\\
+    $\rightarrow$ \textsf{#5} (\textsf{#6})}
+\def\ITEM#1 -> #2 {%
+  \item \textsf{#1}\\
+    $\rightarrow$ \textsf{#2} }
+
+The legend:
+\begin{itemize}
+\item \texttt{<original package>} (\texttt{<bundle name of original package>})\\
+  \texttt{<patch package>} (\texttt{<bundle name of patch package>})
+\end{itemize}
+
+Current version (\filedate\space\fileversion) supports the followings:
+\begin{itemize}
+\ITEMoo  tracefnt (latex) -> ptrace/uptrace (platex/uplatex)
+\ITEMoo  fltrace (latex) -> pfltrace (platex)
+\ITEMoo  array (latex-tools) -> plarray (platex-tools)
+\ITEMooo array (latex-tools) + plext (platex) -> plextarray (platex-tools)
+\ITEMooo delarray (latex-tools) + plext (platex) -> plextdelarray (platex-tools)
+\ITEMoo  everysel (ms) -> pxeverysel (platex-tools)
+\ITEMoo  everyshi (ms) -> pxeveryshi (platex-tools)
+\ITEMoo  atbegshi (oberdiek) -> pxatbegshi (platex-tools)
+\ITEMoo  ftnright (latex-tools) -> pxftnright (platex-tools)
+\ITEM    pdfpages -> pxpdfpages (maintained here!)
+\end{itemize}
+Note that, of course, the list may be adjusted
+(addition, deletion or replacement)
+in the future to get the expected result.
+Feel free to report some compatibility issue or request changes!
+
+\section*{Disabling a specific patch}
+
+By default, \texttt{<patch package>} is automatically loaded when
+\texttt{<original package>} is detected, following the whole list.
+However, there is still a possibility of another regression issue.
+In that case, you can disable the detection of
+\texttt{<original package>} by using the command:
+\begin{verbatim}
+    \plautopatchdisable{<original package>}
+\end{verbatim}
+If you want to disable multiple packages, you can give
+a comma-separated list of them:
+\begin{verbatim}
+    \plautopatchdisable{<original package 1>,<original package 2>}
+\end{verbatim}
+
+\end{document}