remove ibycus, it has been removed from CTAN and is superseeded by

ibygrk


git-svn-id: svn://tug.org/texlive/trunk@5511 c570f23f-e606-0410-a88d-b1316a301751

5 files changed, 0 insertions, 714 deletions

diff --git a/Master/texmf-dist/doc/generic/ibycus/README b/Master/texmf-dist/doc/generic/ibycus/README
deleted file mode 100644
index 189e8b1935e..00000000000
--- a/Master/texmf-dist/doc/generic/ibycus/README
+++ /dev/null
@@ -1,303 +0,0 @@
-[This is ./doc/fonts/ibycus4/tex/README
- 12 July, 1997.  [For some of the previous history see the 
-	final notes on Ibycus 3, from May 30, 1966 in README.ibycus3]
-	
-		( THIS IS A TDS-CONFORMANT PACKAGE )
-
-BE SURE THAT ibycus4.map HAS BEEN MADE ACCESSIBLE AS DESCRIBED BELOW
-
-FOR INCOMPATIBILITIES WITH IBYCUS3, SEARCH FOR %%%%%%%%%%%% on page 3.
-
-Like its predecessors, Ibycus4 is based on Silvio Levy's
-realization of a classic Didot cut of Greek type from around 1800.	
-Ibycus4 is as close as possible to Ibycus3 in all possible
-respects, but there are some improved set widths and pair-kernings
-which might clobber old carefully adjusted text spacings
-such as Alexandrian shaped poetry.
-
-A sample input file is provided in iby4text.tex or ibycus4.ltx
-
-PLAIN TeX USAGE:   \input iby4text
-
-	then: \setgreek10/12 (or other reasonable combination 
-				of pointsize and leading)
-
-	then: Latin text \GK{}a)rxai=a gra'mmata\RM{} Latin again.
-
-		NOTE that the ) is a smooth breathing, not a parenthesis.
-
-LaTeX2e USAGE:  \usepackage{ibycus4}
-
-	then: Latin text {\greek{a)rxai=a gra'mmata}} Latin again.
-		(Note the double braces, there is a font change here.)
-
-	change font size with the \fontsize macro, thus:
- 		
-		\fontsize{14}{17pt}\selectfont
-        
-
-The TeX files in $TEXMF/tex/generic/ibycus4 together with the METAFONT
-files in $TEXMF/fonts/source/public/ibycus4 {\em especially
-ibycus4.map} are intended to provide a reasonable degree of
-compatibility between David Packard Jr.'s Ibycus/TLG system, and the
-TeX and METAFONT environment.  If you are not using Karl Berry's
-path-searching or its equivalent, these TeX files may have to be moved
-to an appropriate branch directory of $TEXMF/tex/
-                                                               continues . . .
-
-                                                              README Page 2
-
-The TeX files are:
-
-	1.  $TEXMF/tex/generic/ibycus4/ibycus4.tex 
-	
-	    The driver file for this package (in plain tex).
-
-        1a. $TEXMF/tex/generic/ibycus4/ibycus4.sty
-
-	    The driver file for this package (in LaTeX2e).
-
-	2.  $TEXMF/tex/generic/ibycus4/setiby4.tex 
-
-	    Included by ibygrk.tex unless newnep format is running
-
-	3.  $TEXMF/tex/generic/ibycus4/tlgsqq.tex
-
-	    The name suggests the association with coding of the 
-	    Thesaurus Linguae Graecae.
-
-	This file provides uniquely named macros for all combinations
-	of letter and accent, so that any invocation of the macro will
-	produce a sequence of characters corresponding with the
-	entries put into the TFM ligature table.  These sequences may
-	always be used to generate accented characters.  They are
-	based, with some slight modifications where David Packard's Ibycus
-	input coding seems too misleading, on the Ibycus adaptation of
-	TLG beta-code.  
-	
-	For input coding, the parentheses, ) and ( are used for
-	breathings, ' (ASCII char '047--acute or single quote) and `
-	(ASCII char '140--grave) are used for oxytone and barytone (to
-	avoid preemption of the usual TeX excape character) and =
-	(ASCII char '075) is used for perispomenon to avoid preemption
-	of the active tie character in plain.tex.  + is used for
-	dieresis after u or i and for some other special characters.
-	| is used for iota subscript and ! (ASCII char '041--\bang) is
-	used to call out the "dot-under" convention for partially
-	preserved letters in manuscript or epigraphical texts.  Order
-	is significant.  Breathings or diereses come first, after the
-	affected letter, then accents, then iota subscript or \bang.
-	These codings represent the input coding convention, not the
-	mapping in the font itself.
-
-	The digraphs, trigraphs etc. can be read from tlgsqq.tex
-	Postpositives fall into three order-dependent and 
-	exclusive classes--only one from each class may be used
-	in any single accented cluster. 
-
-               1                     2                  3	
-	      nil                   nil                nil
-               ( [asper]             ' [oxytone]        | [iota subscript]
-               ) [lenis]             ` [barytone]       ! [dot below letter]
-               + [other]             = [perispomene]                 
-
-                                                               continues . . .
-
-                                                              README Page 3
-
-	Some special digraphs are K+ Koppa, k+ koppa, C+ lunate Cigma,
-	c+ lunate cigma, s+ sampi (lowercase late form only) and s| which
-	forces a medial sigma.
-	<< and >> give guillemets (not guillemots as Adobe
-	ornithologically supposes) and (( )) give single parentheses
-	though care must be taken that the first ( or ) is not
-	interpreted as a breathing.  {((} and {))} are safe.
-
-	%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-	NOTE: THE FOLLOWING CODINGS ARE NOT COMPATIBLE WITH IBYCUS3
-	%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-	I have tried to keep incompatible codings to the minimum
-	but the ibycus3 versions of the following were extremely
-	undesirable.  These are all simplifications of ibycus3 coding.
-        %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-	The mark of elision is ' or {'} (the form in braces may be
-	needed to prevent ' from being read as an accent).
-	Single quotes may be provided by ` {`} and ' {'}, (isolate them 
-        in braces if necessary). Double quotes are `` {``} and
-	'' {''} (isolate in braces if necessary).  < and > are the
-	angle brackets used for conjectural supplements. 
-        %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-	4. ibycus4.map  
-
-	This is {\em exactly} the same file as is used by METAFONT.
-	Copy $TEXMF/fonts/source/public/ibycus4/ibycus4.map 
-	to the same directory as ibycus4.tex
-	or, even better, link it with a symbolic link.
-	It is so structured that it can be read by either
-	TeX or Metafont.  The mapping is very close to that of GreekKeys,
-	which is distributed for the Macintosh by the American
-	Philological Association. Other mappings can be created
-	in the same manner.
-
-        5. $TEXMF/tex/generic/ibycus4/Uibycus4.fd
-
-	Supporting fd file for LaTeX2e.
-
-	6. $TEXMF/tex/generic/ibycus4/iby4extr.tex
-
-	Access to some editorial symbols for classical editions.
-
-                                                               continues . . .
-
-                                                              README Page 4
-
-	7. $TEXMF/tex/generic/ibygrk/ibycus4.ltx
-	   $TEXMF/tex/generic/ibygrk/iby4text.tex
-	The exquisite little poem by Ibycus of Rhegium, until recently
-	almost the only thing known by him.  (The Ibycus system
-	developed by David Packard is only indirectly named after
-	the poet.  The direct inspiration was Packard's cat.)
-
-                          M E T A F O N T
-
-The METAFONT part of the package consists of a set of files which use
-the original characters of Silvio Levy's greek fonts and combine them
-in ways which reflect the increased capabilities of TeX and METAFONT
-developed since Levy did the original greek for TeX. The Levy source
-files can be got from one of the CTAN archives and placed in
-$TEXMF/fonts/source/public/levy
-                                where they will automatically become
-accessible if you are using a TeX Directory Structure [TDS] layout of
-files.  If you are not using a file searching system like Karl Berry's
-"kpathsea", see $TEXMF/fonts/source/public/ibycus4/ibycus4.mf for
-hints on making the Levy source available.  For directions on the
-use and management of Karl Berry's path searching, consult "The TeX
-Live Guide, version 2" by Sebastian Rahtz and Michael Goosens, in
-{\it TUGboat}. Volume 18 (1997). Pages 81-112, especially pp. 87--9.
-Web2c TeX for Unix systems, Thomas Esser's teTeX, and the Solaris package
-referenced at http://smc.vnet.net/solaris_2.5.html all use Karl
-Berry's path searching.
-
-Ibycus4 METAFONT files are in $TEXMF/fonts/source/public/ibycus4
-
-The most significant changes are:
-
-	1.  The large repertory of initial/medial sigma + letter pairs
-	is suppressed from the new fonts, and the new enhanced TFM
-	ligature scheme is used instead to provide for the automatic
-	differentiation between medial and final sigma.
-
-	2.  The cells thus opened up in the font mapping are used for
-	a variety of additional characters:
-
-		a.  A full repertory of vowels with breathings and
-		barytone accents (many of these were absent from the
-		original).  The various forms of long epsilon and
-		omicron with perispomene accent needed for early Attic
-		and similar local scripts are provided.
-
-		b.  Lunate sigma, digamma, koppa and sampi are
-        	provided (the last in its lowercase late form
-		only, since earlier forms are rather problematic
-		and are virtually unused even in epigraphical texts).  
-	
-		c.  A simple iota subscript in a 0.5em character space
-		is provided at position '174 for use in unusual
-
-                                                               continues . . .
-
-                                                              README Page 5
-	
-		groupings.  For all normal usages three additional
-		occurences of the glyph are kerned (in the traditional
-		sense) far to the left so that they will fit under
-		alpha, eta and omega respectively.  These characters
-		are called out automatically through the TeX TFM
-		ligature system, for which see below.  The glyph under
-		eta is shortened slightly to give better clearance
-		under the left stem of lowercase eta.  The iota
-		subscript glyph retains its simple form in 300dpi
-		renditions, and in any bitmap which drops below
-		500dpi, but it thins out and develops a slight
-		rightward hook at 600dpi and above.
-
-		d. The mechanism of drastic left kerning is also used
-		to set dots under letters which cannot be read
-		completely from the manuscript or stone.  These dota
-		are likewise called out automatically through the TFM
-		ligature system.  A final ! {\bang} after any letter
- 		or letter with postpositive accents (except those
-		with iota subscripts) will produce the dotted form.
-
-        	e.  Angle brackets, half brackets, double quotes, braces,
-		a dagger and a doubledagger are now provided (see 
-        	iby4extr.tex).
-
-	3.  All characters have been named.  The constructs
-	ASCII"A" and oct"000" appear only at lower levels 
-	of programming.
-
-	4.  Character spacing has been adjusted through kerning tables,
-	particularly around lowercase iota (file ibylig4.mf).
-	There is better separation between breathings and accents
-	(this has required a redesign of almost all accents) and
-	clearance between accent and base letter has been increased.
-	The perispomene has been restored to its traditional form with
-	a thick center and tapered ends, and the breathings have been
-	given shorter, tapered tails.  The deep ink trap between the
-	bulb and tail of the breathings has been eliminated.  Accents
-	over epsilon have been raised and slightly shortened to give
-	better clearance. The accents with diaeresis have been shifted
-        up and laterally to clear the dot they lean toward.  
-
-	5.  Font mapping is specified independently of other
- 	parameters, in a distinct and separate file (file ibycus4.map).
-	In some cases it may be more effective to remap the font
-	than to struggle with TeX remapping.  
-
-                                                               continues . . .
-
-                                                              README Page 6
-
-	6.  A programming error which produced the wrong displacement
-	value with free-standing accents has been corrected.  Accents
-	before uppercase vowels are kerned (in the traditional sense)
-	out left to a negative left side bearing of about one unit
-	(1/18em) unit so that their escapement does not leave
-	excessive space after the preceding word or at the start of a
-	line.  They have also been properly pair-kerned with the
-	uppercase vowels.
-
-A new naming convention uses "ibycus4" wherever possible, and
-the shorter string "iby4" where that would lead to ambiguity.
-some of the individual METAFONT character files are simply
-taged with the number 4.  8+3 filename compatibility is preserved.
-(under protest and with difficulty).   
-
-The names of PK and TFM files follow Karl Berry's font name convention
-( 84 is the encoding for Ibycus 4).
-
-Foundry   Facename    Weights   Variants    Encoding_Variants  DesignSize
- 
-f            ib      [r], b      r, o          84              [10], 9, 8
- 
-fibr84 fibo84 fibb84 
- 
-   with METAFONT design-size additions
-fibr848 fibo848 fibb848 
-fibr849 fibo849 fibb849 
- 
-Driver files for the Bold Oblique variant can be provided but their use
-is discouraged.  These Didot-derived characters do not stand up well
-to either boldfacing or obliqueing, and the combination is quite
-unfortunate. The typewriter style originally offered with these
-designs is quietly forgotten, although the code for it is still
-embedded in Silvio Levy's source.	
-
-	Also in the works, a type1 version.
-
-Pierre A. MacKay
-Department of Classics
-University of Washington
-mackay@cs.washington.edu
diff --git a/Master/texmf-dist/doc/generic/ibycus/ibycus3.RME b/Master/texmf-dist/doc/generic/ibycus/ibycus3.RME
deleted file mode 100644
index 7f7f5672380..00000000000
--- a/Master/texmf-dist/doc/generic/ibycus/ibycus3.RME
+++ /dev/null
@@ -1,231 +0,0 @@
-[This is ./doc/fonts/ibycus3/tex/README
- May 1992, revised Apr. 1994, revised for LaTeX2e Sep-Oct. 1995
- Final notes on Ibycus 3, May 30, 1966 ]
-	
-		( THIS IS A TDS-CONFORMANT PACKAGE )
-
-BE SURE THAT ibycus3.map HAS BEEN COPIED AS DESCRIBED BELOW
-
-A sample input file is provided in iby3text.tex or ibycus3.ltx
-
-PLAIN TeX USAGE:   \input iby3text
-
-	then: \setgreek10/12 (or other reasonable combination 
-				of pointsize and leading)
-
-	then: Latin text \GK{}a)rxai=a gra'mmata\RM{} Latin again.
-
-		NOTE that the ) is a smooth breathing, not a parenthesis.
-
-LaTeX2e USAGE:  \usepackage{ibycus3}
-
-	then: Latin text {\greek{a)rxai=a gra'mmata}} Latin again.
-		(Note the double braces, there is a font change here.)
-
-	change font size with the \fontsize macro, thus:
- 		
-		\fontsize{14}{17pt}\selectfont
-        
-
-The TeX files in $TEXMF/tex/generic/ibycus3 together with the 
-METAFONT files in $TEXMF/fonts/source/public/ibycus3
-{\em especially ibycus3.map} are intended to provide a
-reasonable degree of compatibility between David Packard Jr.'s
-Ibycus/TLG system, and the TeX and METAFONT environment.  These TeX
-files may have to be moved to an appropriate branch directory of
-$TEXMF/tex/ if you are not using Karl Berry's path-searching
-or its equivalent.
-
-The package consists of a set of METAFONT files which use the original
-characters of Silvio Levy's greek fonts (these can be got from
-one of the CTAN archives and placed in $TEXMF/fonts/source/public/levy
-if you are using a TeX Directory Structure [TDS] layout of files)
-and combine them in ways which reflect the increased capabilities of TeX
-and METAFONT developed since Levy did the original greek for TeX.
-If you are not using a file searching system like Karl Berry's
-"kpathsea", see $TEXMF/fonts/source/public/ibycus3/ibycus3.mf for
-hints on making the levy source available
-
-Ibycus3 METAFONT files are in $TEXMF/fonts/source/public/ibycus3
-
-The most significant changes are:
-
-	1.  The large repertory of initial/medial sigma + letter pairs
-	is suppressed from the new fonts, and the new enhanced TFM
-	ligature scheme is used instead to provide for the automatic
-	differentiation between medial and final sigma.
-
-	2.  The cells thus opened up in the font mapping are used for
-	a variety of additional characters:
-
-		a.  A full repertory of vowels with breathings and
-		barytone accents (absent from the original).
-
-		b.  Digamma, koppa and sampi (the last in lowercase
-		late form only, since earlier forms are rather
-		problematic and are virtually unused even in
- 		epigraphical texts).  
-		NOTE: there is still room for things like acrophonic
-		numerals, and perhaps the two markers used to
-		distinguish numeric from alphabetic use of the letters
-		ought to be provided.   Another possibility is
-		special symbols for text-edition, such as double
-		brackets.  (Editor supplements can be done
-		using the characters defined in iby3extr.tex).
-	
-		Iota subscript retains its simple form in 300dpi
-		renditions, and in any bitmap which drops below
-		500dpi, but it thins out and develops a slight
-		rightward hook at 600dpi and above.
-
-	3.  All characters have been named.  The constructs
-	ASCII"A" and oct"000" appear only at lower levels 
-	of programming.
-
-	4.  Character spacing has been adjusted through kerning tables,
-	particularly around lowercase iota (file ibylig.mf).
-	There is more that could and should be done.  
-        Maybe it will yet happen.
-
-	5.  Font mapping is specified independently of other
- 	parameters, in a distinct and separate file (file ibycus3.map).
-	In some cases it may be more effective to remap the font
-	than to struggle with TeX remapping.  
-
-	6.  Accents have been redesigned in several cases, usually
-	in an attempt to reduce crowding among the elements of
-        accent clusters.  The accents with diaeresis have been shifted
-        to clear the dot they lean toward.  A programming error which
-        produced the wrong displacement value with free-standing accents
-        has been corrected. Accents before uppercase vowels are
-        pair-kerned with the vowels.  Angle brackets, half brackets,
-        double quotes, braces and a dagger are now provided (see 
-        ibyextra.tex).
-
-The associated TeX files are:
-
-	1.  $TEXMF/tex/generic/ibycus3/ibycus3.tex 
-	
-	The driver file for this package (in plain tex).
-
-        1a. $TEXMF/tex/generic/ibycus3/ibycus3.sty
-
-	The driver file for this package (in LaTeX2e).
-
-	2.  $TEXMF/tex/generic/ibycus3/set3grk.tex 
-
-	Included by ibygrk.tex unless newnep format is running
-
-	3.  $TEXMF/tex/generic/ibycus3/tlgsqq.tex
-
-	The name suggests the association with coding of the 
-	Thesaurus Linguae Graecae.
-
-	This file provides uniquely named macros for all combinations
-	of letter and accent, so that any invocation of the macro will
-	produce a sequence of characters corresponding with the
-	entries put into the TFM ligature table.  These sequences may
-	always be used to generate accented characters.  They are
-	based, with some slight modifications where David Packard's Ibycus
-	input coding seems too misleading, on the Ibycus adaptation of
-	TLG beta-code.  ) and ( are used for breathings, ' and ` are
-	used for oxytone and barytone (to avoid preemption of the
-	usual TeX excape character) and = is used for perispomenon
-	to avoid preemption of the active tie character in plain.tex.
-	| is used for iota subscript.  Order is significant.
-	Breathings or diereses come first, after the affected letter, then 
-	accents, then iota subscript.  + is dieresis, which should
-	only appear after u or i.  '' is the mark of elision
-	Single quotes may be provided by `` and '', but isolate them 
-        in braces whereever the first of either pair risks being
-	interpreted as an accent.
-
-	The digraphs, trigraphs etc can be read from tlgsqq.tex
-
-	Additional digraphs are K+ Koppa, k+ koppa, C+ lunate Cigma,
-	c+ lunate cigma, s+ sampi (lowercase late form only) and s| which
-	forces a medial sigma at word end.
-	<< and >> give guillemets (not guillemots as Adobe
-	ornithologically supposes) and (( )) give single parentheses
-	though care must be taken that the first ( or ) is not
-	interpreted as a breathing.  {((} and {))} are safe.
-	
-	4. ibycus3.map  
-
-	This is {\em exactly} the same file as is used by METAFONT.
-	Copy $TEXMF/fonts/source/public/ibycus3/ibycus3.map 
-	to the same directory as ibycus3.tex
-	or, even better, link it with a symbolic link.
-	It is so structured that it can be read by either
-	TeX or Metafont.  The mapping is very close to that of GreekKeys,
-	which is distributed for the Macintosh by the American
-	Philological Association. Other mappings can be created
-	in the same manner.
-
-        5. $TEXMF/tex/generic/ibycus3/Uibycus3.fd
-
-	Supporting fd file for LaTeX2e.
-
-	6. $TEXMF/tex/generic/ibycus3/iby3extr.tex
-
-	Some editorial symbols for classical editions.
-
-	7. $TEXMF/tex/generic/ibygrk/ibycus3.ltx
-	   $TEXMF/tex/generic/ibygrk/iby3text.tex
-	The exquisite little poem by Ibycus of Rhegium, until recently
-	almost the only thing known by him.  (The Ibycus system
-	developed by David Packard is only indirectly named after
-	the poet.  The direct inspiration was Packard's cat.)
-
-NOTE: Earlier users of this package may be dismayed by the new naming
-system for the fonts, but it seems the only way to provide for
-desirable results.  It is necessary to keep this Ibycus package
-clearly distinct from the new package announced below.  Symbolic
-links are provided to ease the transition.  Ibycus4 (see below) will
-be as close as possible to Ibycus3 in all external respects, but
-there are some improved set widths which might clobber old carefully
-adjusted text spacings.  
-
-The new naming convention uses "ibycus3" wherever possible, and
-the shorter string "iby3" where that would lead to ambiguity.
-some of the individual METAFONT character files are simply
-taged with the number 3.  8+3 filename compatibility is preserved.
-(with difficulty).   
-
-The names of PK and TFM files follow Karl Berry's font name convention
-( 84 is the encoding for Ibycus 4, for which see below).
-
-Foundry   Facename    Weights   Variants    Encoding_Variants  DesignSize
- 
-f            ib      [r], b      r, o         83, 84            [10], 9, 8
- 
-fibr83 fibo83 fibb83 
- 
-   with METAFONT design-size additions
-fibr838 fibo838 fibb838 
-fibr839 fibo839 fibb839 
- 
-
-
-Still in the future.
-
-	Ibycus4 will have the major epigraphical characters and conventions,
-        dotted letters, epsilon and omicron with perispomene accent
-        for pre-403 Attic orthography, uprighted italic h for aspirate and
-	a special set of TFM files for "stoichedon" inscriptions.
-	Maybe even a prime that really works for numbers.  
-	The input coding for Ibycus4 is hardly changed at all from
-	Ibycus3 coding: The apostrophe and single quotes can be
-	given as ` {`} and ' {'} instead of having to be doubled
-	and <> give conjectural emendation angle brackets without
-	requiring an excursion into math mode.  ! {\bang} gives
-	a dotted letter for all except iota-subscripted vowels.
-	Slight improvements in set widths, which is the chief reason
-	for keeping Ibycus3 and Ibycus4 clearly separate.
-
-	Also in the works, a type1 version.
-
-Pierre A. MacKay
-Department of Classics
-University of Washington
-mackay@cs.washington.edu
diff --git a/Master/texmf-dist/doc/generic/ibycus/ibycus4.ltx b/Master/texmf-dist/doc/generic/ibycus/ibycus4.ltx
deleted file mode 100644
index 2800c5904b1..00000000000
--- a/Master/texmf-dist/doc/generic/ibycus/ibycus4.ltx
+++ /dev/null
@@ -1,40 +0,0 @@
-% ibycus4.ltx-- P.A.  MacKay -- July 13, 1997
-% Pierre A. MacKay, Dept. of Classics, University of Washington
-% mackay@cs.washington.edu
-% ------------------------
-% An example of ibycus4 using LaTeX2e 
-%
-% Text from D. L. Page, {\it Greek Melic Poets}, (Oxford, 1962), p. 148
-%     accepting the emendations of Mehlhorn and Hermann.  
-%
-\documentclass[11pt]{article}
-\usepackage{ibycus4}
-\pagestyle{empty}
-
-\begin{document}
-\begin{center}
-\greek{\fontsize{20.74}{17pt}\selectfont
-IBUKOU TOU RHGINOU}
-\end{center}
-
-\vspace{.5in}
-
-\greek{
-\fontsize{14}{17pt}\selectfont
-\begin{verse}
-\leavevmode\llap{)=}Hri me`n ai(' te Kudw'niai\\
-mhli'des a)rdo'menai r(oa=n\\
-e)k pota'mwn i('na Parqe'nwn\\
-kh=pos a)kh'ratos, ai(' t' oi)nanqi'des\\
-au)co'menai skie'roisin u(f' e('rnesin\\
-oi)nare'ois qale'qoisin; e)moi` d' e)'ros\\
-ou)demi'an kata'koitos w('ran.\\
-<a)ll' a(' >q' u(po` steropa=s fle'gwn\\
-Qrhi+'kios Bore'as a)i's|-\\
-\quad swn para` Ku'pridos a)zale'ais mani'aisin e)remno`s a)qambh`s\\
-e)gkrate'ws pedo'qen \dagger fla'sen\dagger\\
-h(mete'ras fre'nas.
-\end{verse}}
-\end{document}
-
-\bye
diff --git a/Master/texmf-dist/doc/generic/ibycus/psibycus.RME b/Master/texmf-dist/doc/generic/ibycus/psibycus.RME
deleted file mode 100644
index 0abc81d1dae..00000000000
--- a/Master/texmf-dist/doc/generic/ibycus/psibycus.RME
+++ /dev/null
@@ -1,99 +0,0 @@
-This file is psibycus.RME
-
-The Type1 version of the Ibycus Greek font (regular weight only)
-available on orhan.classics.washington.edu, in the directory
-/ftp/pub/tex has been sell enough received that it is being added to
-the ibycus4 package.  The font is still largely unhinted, but I am
-beginning to wonder whether that matters.  I did plan to provide a
-rather thorough set of hints, since the primary purpose for making up
-this font was to get away from the crude bitmap scaling that is all
-you can get out of PDF readers.  Hinting, however, is even worse than
-filing matrices.  It is a soul-destroying bore, and I cannot do very
-much of it at any given session.  The absence of hints will not be
-noticed at resolutions of 600dpi and above.  On paper, the weight is
-just about right.  In PDF files created with Adobe Distiller, the
-screen appearance is remarkably good.  In xdvi it is even better.  In
-ghostscript the rasterization uncontrolled by hints produces too dark
-an effect, but it does make it that much more readable.  The font has
-a private UniqueID in the open range for now, but a registered
-UniqueID will be applied for.
-
-The original METAFONT realization of ibycus4 remains the controlling
-form of the font.  The TeX user will see absolutely no difference
-in the set-widths of the Type1 font because the set widths in the 
-TFM file are directly related (with infinitesimal roundings) to
-those in the the TFM file for the METAFONT version.  NOTE: My previous
-hope that I could use exactly the same TFM for the type1 version
-and the METAFONT version failed because some renderers such as
-pdftex choke on even the slightest difference in set width.
-
-The Type1 control points have been derived from METAFONT log output
-generated by "tracingspecs".  This is not impossible, as has sometimes
-been claimed, but it does take work.
-
-The additions to the METAFONT based package consist of:
-
-1.  IbycusHTG-Regular.pfa ( = fibr.pfa = IBYHTGR_.PFB ).  
-    The character designs are Silvio Levy's. Some small differences
-    in accent positioning and vertical positioning on the classic
-    METAFONT typeface grid have been allowed.  My own lowercase lunate
-    sigma has been improved.  These changes will ultimately be read
-    back into the ibycus4 METAFONT source.  
-
-2.  fibr.tfm (blended from the TFM file produced by afm2tfm and
-    the ligature and kerning from fibr84.tfm.  The use of the Type1 font
-    is specified by calling on fibr, rather than fibr84.
-    Obliqued versions are invoked with fibo.tfm (derived in the same way).
-    Bold versions of the font are still exclusively METAFONT. 
-    They will continue to be invoked as fibb84[89]?
-    until I make up Type1 versions of them (if I ever do).
-
-3.  fibr.vf (fibo.vf), which serves to provide a reference into a dvips map
-    file.  The raw TFM for this VF file is fibr84.tfm (fibo84.tfm), which
-    has the interesting effect of making METAFONT generated PK files a
-    fail-safe alternative in sizes above 10pt if the dvips map lookup fails.
-    The checksums for fibr.tfm fibr84.tfm and fibr.vf are identical.
-    likewise for fibo.tfm fibo84.tfm and fibo.vf.
-    This is arbitrary, since fibr.vf has integer escapement values
-    rounded from the METAFONT values in the tfm files.
-
-4.  config.iby and iby.map.  The iby.map file shows how to associate
-    fibr84 and fibo84 with IbycusHTG-Regular.  
-        fibr84 IbycusHTG-Regular <IbycusHTG-Regular.pfa
-	fibo84 IbycusHTG-Regular  ".167 SlantFont" <IbycusHTG-Regular.pfa
-	  or
-        fibr84 IbycusHTG-Regular <fibr.pfa
-	fibo84 IbycusHTG-Regular  ".167 SlantFont" <fibr.pfa
-    If you still use the large explicit psfonts.map from the web2c
-    days, these lines can be copied into psfonts.map for general use.  
-    A better idea is to put them into a file iby.map and add the
-    line p +iby.map to the sort of psfonts.map that is provided
-    with teTeX.
-
-5.  IbycusHTG-Regular.afm and IbycusHTG.enc.  These are provided for
-    information only.  The AFM file contains only the character info
-    and the pair-kerning data.  There is no point in going further
-    since the Adobe convention for AFM is incapable of specifying the
-    ligature sequences needed for ibycus4.  The encoding file could
-    supply both ligatures and pair-kerns, but to what purpose?
-
-6.  Various TeX input files rewritten to use the fibr invocation in
-    place of the fibr84 invocation.  (This is the only change that
-    users will need to make, other than installing the above files in
-    the TEXMF directory tree).
-
-IbycusHTG-Regular is licensed without charge for use in the creation of
-documents in all media, in accordance with the included copyright
-notice.  Users are welcome and indeed encouraged to adapt the font
-to other typesetting systems.  Note that iota subscript is applied to
-the affected vowel as a following zero-width character kerned
-drastically to the left.  (Other well-known Polytonic Greek fonts
-do the same thing. This trick saves many, many glyph spaces for more
-constructive use.)  
-
-        mackay@cs.washington.edu                Pierre A. MacKay
-Smail:  Department of Classics                  Emeritus Druid for
-        Denny Hall, Box 353110		        Unix-flavored TeX
-        University of Washington
-        Seattle, WA 98195
-        (206) 543-2268 (Message recorder)
diff --git a/Master/texmf-dist/doc/generic/ibycus/psibycus.ltx b/Master/texmf-dist/doc/generic/ibycus/psibycus.ltx
deleted file mode 100644
index 64ad1099b3a..00000000000
--- a/Master/texmf-dist/doc/generic/ibycus/psibycus.ltx
+++ /dev/null
@@ -1,41 +0,0 @@
-% psibycus.ltx-- P.A.  MacKay -- July 16, 1999
-% Pierre A. MacKay, Dept. of Classics, University of Washington
-% mackay@cs.washington.edu
-% ------------------------
-% An example of ibycus4 using LaTeX2e and calling on the type1
-% font IbycusHTG-Regular in place of fibr84
-%
-% Text from D. L. Page, {\it Greek Melic Poets}, (Oxford, 1962), p. 148
-%     accepting the emendations of Mehlhorn and Hermann.  
-%
-\documentclass[11pt]{article}
-\usepackage{psibycus}
-\pagestyle{empty}
-
-\begin{document}
-\begin{center}
-\greek{\fontsize{20.74}{17pt}\selectfont
-IBUKOU TOU RHGINOU}
-\end{center}
-
-\vspace{.5in}
-
-\greek{
-\fontsize{14}{17pt}\selectfont
-\begin{verse}
-\leavevmode\llap{)=}Hri me`n ai(' te Kudw'niai\\
-mhli'des a)rdo'menai r(oa=n\\
-e)k pota'mwn i('na Parqe'nwn\\
-kh=pos a)kh'ratos, ai(' t' oi)nanqi'des\\
-au)co'menai skie'roisin u(f' e('rnesin\\
-oi)nare'ois qale'qoisin; e)moi` d' e)'ros\\
-ou)demi'an kata'koitos w('ran.\\
-<a)ll' a(' >q' u(po` steropa=s fle'gwn\\
-Qrhi+'kios Bore'as a)i's|-\\
-\quad swn para` Ku'pridos a)zale'ais mani'aisin e)remno`s a)qambh`s\\
-e)gkrate'ws pedo'qen \dagger fla'sen\dagger\\
-h(mete'ras fre'nas.
-\end{verse}}
-\end{document}
-
-\bye