rm elsevier, use elsarticle

git-svn-id: svn://tug.org/texlive/trunk@20361 c570f23f-e606-0410-a88d-b1316a301751

8 files changed, 0 insertions, 1813 deletions

diff --git a/Master/texmf-dist/doc/latex/elsevier/CHANGES b/Master/texmf-dist/doc/latex/elsevier/CHANGES
deleted file mode 100644
index 976990eebce..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/CHANGES
+++ /dev/null
@@ -1,43 +0,0 @@
-Changes from elsart 2.19 to 2.20

-================================

-

-Enable \tableofcontents at the end of the frontmatter

-Suppress linenumbering in the frontmatter

-Correct an error in the \collab command

-Define \@ptsize to report the point size

-Add \endNoHyper to \endfrontmatter

-Change \let to \def in \endfigure, \endtable and \endalgorithm commands

-

-Changes from elsart 2.18 to 2.19

-================================

-

-2006-05-01: added narrowdisplay option

-2006-05-01: added draft and final option

-2006-05-01: added \ensuremath around \ell in \@alph (suggested by

-			Alik Widge)

-2006-05-01: added \cal and \mit as alternatives for \mathcal and

-			\mathnormal

-2006-05-01, in \collab@fmt: added check for the presence of a

-			footnote symbol

-2001-02-22, in \collab@arg: \first@collab has been replaced with

-			\first@author

-2001-02-22, in \ead@au: changed \edef to \def

-2001-12-14, in \collapse@citex: added code to remove leading spaces

-			on cite key, from ltbibl

-

-Changed files July 2006

-=======================

-

-Updated: elsart.cls.

-

-New: elsart1p.cls, elsart3p.cls, elsart5p.cls.

-

-Removed: elsart.sty, elsart12.sty. These are outdated.

-

-Rewritten: instructions-harv.pdf, instructions-num.pdf. These replace

-model-harv.pdf and model-num.pdf.

-

-Removed: instraut. These instructions are outdated.

-

-Modified: template-harv.tex, template-num.tex. The lineno package was

-added.

diff --git a/Master/texmf-dist/doc/latex/elsevier/README b/Master/texmf-dist/doc/latex/elsevier/README
deleted file mode 100644
index 853b8b9510c..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/README
+++ /dev/null
@@ -1,36 +0,0 @@
-This is the Elsevier LaTeX package
-Last update: 16 August 2007
-
-Versions
-========
-
-class files: version 2.20, 16-08-2007
-documentation: 18-07-2006
-
-The latest version of this package can always be found at Elsevier's
-web site: http://www.elsevier.com/locate/latex.
-
-Requirements
-============
-Standard LaTeX 2e. Additional LaTeX packages are required for
-additional functionality.
-
-Contained files
-===============
-
-The class file for preprint style: elsart.cls.
-
-The class files for journal layout style: elsart1p.cls, elsart3p.cls,
-elsart5p.cls. See the instructions for an explanation.
-
-For articles with Harvard style (author-year) references:
-instructions: instructions-harv.pdf,
-template file: template-harv.tex,
-the LaTeX file of the instructions: instructions-harv.tex.
-
-For articles with numbered references:
-instructions: instructions-num.pdf,
-template file: template-num.tex,
-the LaTeX file of the instructions: instructions-num.tex.
-
-Copyright (C) 1998-2007 by Elsevier B.V., The Netherlands
diff --git a/Master/texmf-dist/doc/latex/elsevier/instructions-harv.pdf b/Master/texmf-dist/doc/latex/elsevier/instructions-harv.pdf
deleted file mode 100644
index 5b65d009538..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/instructions-harv.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/elsevier/instructions-harv.tex b/Master/texmf-dist/doc/latex/elsevier/instructions-harv.tex
deleted file mode 100644
index c60219e226a..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/instructions-harv.tex
+++ /dev/null
@@ -1,754 +0,0 @@
-\documentclass{elsart}
-\usepackage{ifpdf}
-\usepackage{graphicx,natbib,amssymb,lineno}
-\ifpdf
-\usepackage[%
-  pdftitle={Instructions for use of the document class
-    elsart},%
-  pdfauthor={Simon Pepping},%
-  pdfsubject={The preprint document class elsart},%
-  pdfkeywords={instructions for use, elsart, document class},%
-  pdfstartview=FitH,%
-  bookmarks=true,%
-  bookmarksopen=true,%
-  breaklinks=true,%
-  colorlinks=true,%
-  linkcolor=blue,anchorcolor=blue,%
-  citecolor=blue,filecolor=blue,%
-  menucolor=blue,pagecolor=blue,%
-  urlcolor=blue]{hyperref}
-\else
-\usepackage[%
-  breaklinks=true,%
-  colorlinks=true,%
-  linkcolor=blue,anchorcolor=blue,%
-  citecolor=blue,filecolor=blue,%
-  menucolor=blue,pagecolor=blue,%
-  urlcolor=blue]{hyperref}
-\fi
-
-\renewcommand\floatpagefraction{.2}
-\makeatletter
-\def\elsartstyle{%
-    \def\normalsize{\@setfontsize\normalsize\@xiipt{14.5}}
-    \def\small{\@setfontsize\small\@xipt{13.6}}
-    \let\footnotesize=\small
-    \def\large{\@setfontsize\large\@xivpt{18}}
-    \def\Large{\@setfontsize\Large\@xviipt{22}}
-    \skip\@mpfootins = 18\p@ \@plus 2\p@
-    \normalsize
-}
-\@ifundefined{square}{}{\let\Box\square}
-\makeatother
-
-\def\file#1{\texttt{#1}}
-
-\pagestyle{plain}
-\begin{document}
-
-\begin{frontmatter}
-\title{Instructions for use\\of the document class \file{elsart}}
-
-\author{Simon Pepping}
-\address{Elsevier, P.O. Box 103, 1000 AC Amsterdam,
-Netherlands}
-
-\ead{s.pepping@elsevier.com}
-\ead[url]{authors.elsevier.com/locate/latex}
-
-\begin{abstract}
-This article discusses several features of preparing articles
-with the \file{elsart} document style, using Harvard style bibliographic
-references.
-\end{abstract}
-
-\begin{keyword}
-\file{elsart}, document class, instructions for use
-\PACS 01.30.$-$y
-\end{keyword}
-\end{frontmatter}
-
-\section{Introduction}
-\label{intro}
-
-This article discusses how to prepare articles with the \file{elsart}
-document class.  For more general information about \LaTeX{}, see the
-\LaTeX{} manual written by \citet{Lamp86}.
-
-Elsevier has prepared the following \LaTeX{} support files for
-authors:
-\begin{itemize}
-\item The document class \file{elsart.cls}, which provides a preprint
-  layout.
-\item The document classes \file{elsart1p.cls}, \file{elsart3p.cls},
-  \file{elsart5p.cls}, which each provide a layout in one of
-  Elsevier's standard journal styles, called 1+, 3+ and 5+.
-\item The instructions for use of \file{elsart},
-  \file{instructions-harv} for use with a Harvard-style bibliography,
-  and \file{instructions-num} for use with a numbered style
-  bibliography.
-\item Template files for a quick start of your \LaTeX{} article with
-  \file{elsart},
-  \newline
-  \file{template-harv.tex} for use with a Harvard-style
-  bibliography, and
-  \newline
-  \file{template-num.tex} for use with a numbered
-  style bibliography.
-\item Styles for BibTeX, \file{elsart-harv.bst} for a Harvard-style
-  bibliography, and \file{elsart-num.bst} for a numbered style
-  bibliography.
-\end{itemize}
-The files are freely available from Elsevier's Author Gateway
-\url{http://authors.elsevier.com/locate/latex}. 
-
-On Elsevier's Author Gateway you will also find support files for CRC
-journal articles. Support for monographs or contributed book chapters
-may be obtained via the publisher of the book.
-
-Elsevier's \LaTeX{} support files can also be obtained from one of the
-servers of the Comprehensive TeX Archive Network (CTAN) in the
-directory\newline
-\href{ftp://ctan.tug.org/tex-archive/macros/latex/contrib/supported/elsevier}%
-{\texttt{/tex-archive/macros/latex/contrib/supported/elsevier}}. CTAN is a
-mirrored network of FTP servers, with the following web front ends:
-\href{http://www.tex.ac.uk}{\texttt{www.tex.ac.uk}},
-\href{http://www.dante.de/software/ctan}{\texttt{www.dante.de/software/ctan}}
-(in German) and \href{http://www.ctan.org}{\texttt{www.ctan.org}}. The
-network is widely mirrored, see
-\url{http://www.tug.org/tex-archive/CTAN.sites}. It holds up-to-date
-copies of all the public-domain versions of \TeX, \LaTeX, Metafont and
-ancillary programs.
-
-Note that CTAN is not related to Elsevier, and that Elsevier's author
-support cannot accept complaints or answer questions about the
-availability of any CTAN server.
-
-The non-Elsevier macro packages recommended later in this document and
-many other useful macro packages can also be obtained from CTAN.
-
-In the following sections we show how you may use the \file{elsart}
-document class.
-
-\section{Options}
-
-The \file{elsart} document class enables the following options:
-
-\begin{description}
-  
-\item[doublespacing, reviewcopy] This is a single option with two
-  names to obtain double line spacing, as is sometimes required for
-  copies submitted for review.
-  
-\item[seceqn, secthm] The option \texttt{seceqn} numbers the equation
-  environments per section. The option \texttt{secthm} does the same
-  for the \texttt{thm} environment. In elsart all predefined theorem
-  environments except Algorithm, Note, Summary and Case use the same
-  counter as the \texttt{thm} environment.
-
-\item[draft, final] As in many other document classes, these are
-  options to produce draft and final layout. In the draft layout you
-  will see warnings for overfull boxes. You also need draft layout to
-  test your formulas on a narrower display width, see option
-  \texttt{narrowdisplay}.
-  
-\item[narrowdisplay] Many Elsevier journals print their text in two
-  columns. Because the preprint layout uses a larger line width
-  than such columns, the formulas are too wide for the line width in
-  print. In draft mode (see the \texttt{draft} option) you can use the
-  \texttt{narrowdisplay} option to force a narrower width for
-  displayed formulas. The width is roughly equal to the column width
-  of the printed journals, compensated for the larger font size of the
-  preprint layout. The \texttt{narrowdisplay} option is ineffective
-  with packages which redefine the equation environments, such as
-  \texttt{amsmath}.
-  
-  The \texttt{narrowdisplay} option is especially useful for journals
-  for which the articles are printed from the author's \LaTeX{} file.
-  This is the case for a number of mathematics journals. When you
-  break your formulas such that they fit in the narrow column width,
-  the typesetter will be able to retain most of your breaks. Article
-  for other journals are printed after transformation to an XML file.
-  For such journals the formula layout in the \LaTeX{} file is always
-  lost in the transformation.
-  
-  The narrow display width is obtained by giving the formulas a larger
-  indent. Too wide formulas in the one-line display environments
-  \texttt{equation} and \texttt{displaymath} will show an overfull
-  rule:
-  
-  \def\testformula{%
-    \sum_{i=0}^{\infty}A^n\int \mathrm{d}x\, \frac{F_n(x)}{A_n + B_n} =
-    B^n C^n \int\mathrm{d}x\,\int \mathrm{d}y\,
-    \frac{G_n(x,y)}{\mathcal{A}_n{x} + \mathcal{B}_n{y}}
-    }
-  \overfullrule 5pt
-  \mathindent\linewidth\relax
-  \advance\mathindent-259pt
-  \begin{equation}
-    \label{eq:1}
-    \testformula.
-  \end{equation}
-
-  This is not the case for the multiline display environment
-  \texttt{eqnarray}. But in both cases too wide formulas will extend
-  into the right margin, giving you visual feedback:
-
-  \begin{eqnarray}
-    \label{eq:2}
-    \testformula,\nonumber\\
-    \testformula.
-  \end{eqnarray}
-
-  When you switch off draft mode, the formulas will have their normal
-  indentation, and too wide formulas will no longer be signalled.
-
-\end{description}
-
-\section{Print layout}
-\label{printlayout}
-
-Elsevier also makes available a few document classes that roughly
-reproduce the layout of the printed journals. The majority of Elsevier
-journals use one of a small set of standard layouts. We have document
-classes for three of those layouts:
-
-\begin{description}
-\item[elsart1p] text width 32 picas (134 mm), text height 47 lines,
-  one column.
-\item[elsart3p] text width 39 picas (164 mm), text height 51 lines,
-  one or two columns.
-\item[elsart5p] text width 43.5 picas (183 mm), text height 57 lines,
-  two columns.
-\end{description}
-
-These classes can be used in the same way as elsart. If you prepared
-an article for elsart, you can run it with one of these print layout
-classes without changes to the markup. In fact, they use elsart and
-you must have elsart on your system as well.
-
-Note that the layout is only roughly the same as that of the printed
-journal. One major source of differences is the font. The printer uses
-a different font with different character widths, which will cause
-deviations in layout. There are various other sources of small
-differences. You cannot use the layout of one of these classes to make
-claims on the final layout of your article.
-
-\section{Frontmatter}
-\label{frontmatter}
-
-The \texttt{elsart} document class has a separate 
-\texttt{frontmatter} environment for the title, authors, addresses,
-abstract and keywords.
-\begin{itemize}
-\item \verb|\title|: As in standard \LaTeX, e.g. 
-\verb|\title{Model}|.
-\item \verb|\author|: Different from standard \LaTeX, the \verb|\author|
-command contains only one author and no address.
-Multiple authors go into multiple \verb|\author| commands,
-separated from each other by commas.
-The address goes into a separate 
-\verb|\address| command.
-Example: \verb|\author{D.E. Knuth}|.
-\item \verb|\address|: Here goes the address, e.g. 
-\verb|\address{CERN, Geneva}|.
-\item \verb|\thanks| and \verb|\thanksref|: 
-These provide footnotes to the title, authors and addresses. 
-The \verb|\thanksref| command takes a label: \verb|\thanksref{label}|
-to relate it to the \verb|\thanks| command with 
-the same label: \verb|\thanks[label]|. There can be several
-references to a single \verb|\thanks| command. Example:\\
-\verb|\title{Model\thanksref{titlefn}}| and\\
-\verb|\thanks[titlefn]{Supported by grants.}|
-\item \verb|\corauth| and \verb|\corauthref|: 
-These provide footnotes to mark the corresponding author and the
-correspondence address. They are used in the same manner as
-\verb|\thanks| and \verb|\thanksref|. Example:\\
-\verb|\author{A. Name\corauthref{cor}}| and\\
-\verb|\corauth[cor]{Corresponding author. Address: ... .}|
-\item \verb|\ead|:
-This command should be used for the email address or the URL of the
-author. It refers to the `current author', i.e., the author last
-mentioned before the command.
-When it holds a URL, this should be indicated by setting the
-optional argument to `url'. Example:
-\verb|\ead{s.pepping@elsevier.com}|,
-\verb|\ead[url]{authors.elsevier.com/locate/latex}|.
-\end{itemize}
-
-It is not necessary to give a \verb|\maketitle| command. The title,
-authors and addresses are printed as soon as \TeX{} sees them.
-
-The authors and addresses can be combined in one of two ways:
-\begin{itemize}
-\item The simplest way lists the authors of one address or one group
-  of addresses, followed by the address or addresses, and so on for
-  all addresses or groups of addresses.
-\item The other way first lists all authors, and then all addresses.
-The authors and addresses are related to each other by labels:
-\verb|\author[label1]{Name1}| corresponds to
-\verb|\address[label1]{Address1}|. Example:
-\begin{verbatim}
-\author[South]{T.R. Marsh},
-\author[Oxford]{S.R. Duck}
-\address[South]{University of Southampton, UK}
-\address[Oxford]{University of Oxford, UK}
-\end{verbatim}
-\end{itemize}
-
-See the extensive examples in figs.
-\ref{ex:explinput}, \ref{ex:exploutput}, 
-\ref{ex:implinput}, \ref{ex:imploutput}.
-
-If you put the frontmatter in an included file, that file should
-contain the whole frontmatter, including its \texttt{begin} and
-\texttt{end} commands. Otherwise, the labels of the frontmatter will
-remain undefined.
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:explinput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-
-\caption{Article opening with explicit links (input)} \label{ex:explinput}
-\vspace{1pc}
-
-\begin{verbatim}
-\documentclass{elsart}
-\usepackage{graphicx,natbib,amssymb}
-\journal{New Astronomy}
-\begin{document}
-\begin{frontmatter}
-
-\title{Stroboscopic Doppler tomography of FO Aqr}
-\author[South]{T.R. Marsh\corauthref{cor}},
-\corauth[cor]{Corresponding author.}
-\ead{trm@astro.soton.ac.uk}
-
-\author[Oxford]{S.R. Duck\thanksref{now}}
-\thanks[now]{Present address: Systems Engineering and Assessment Ltd.,
-Beckington Castle, PO Box 800, Bath BA3 6TB, UK.}
-\ead{srd@sea.co.uk}
-
-\address[South]{University of Southampton, Department of Physics,
-Highfield, Southampton SO17 1BJ, UK} 
-\address[Oxford]{University of Oxford, Department of Physics, Nuclear
-Physics Laboratory, Keble Road, Oxford, OX1 3RH, UK}
- 
-\begin{abstract} 
-FO Aqr is a close binary star in
-which a magnetic white dwarf accretes from a cool companion. Light
-curves and spectra show variations on the orbital frequency, the
-white dwarf's spin frequency and combinations of the two.
-\end{abstract}
-\begin{keyword}
-Accretion, accretion disks \sep Line: profiles \sep
-Binaries: close \sep Novae, cataclysmic variables 
-\PACS 97.10.Gz \sep 97.30.Qt \sep 97.80.Gm 
-\end{keyword}
-\end{frontmatter}
-
-\section{Introduction}
-FO Aqr is a member of the DQ~Her class of stars which
-are close binary stars in which a magnetic white dwarf accretes from
-a late-type main-sequence secondary star. These stars have most
-recently been reviewed by \citet{Patterson94}. 
-\end{verbatim}
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:exploutput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-\caption{Article opening with explicit links (output)\label{ex:exploutput}} 
-\vspace{1pc}
-
-\begin{minipage}{\textwidth}
-\elsartstyle
-\parskip 12pt
-%
-\renewcommand{\thempfootnote}{\fnsymbol{mpfootnote}}
-%
-\leftskip=2pc
-%
-\begin{center}
-{\LARGE Stroboscopic Doppler tomography of FO Aqr}\\[30pt]
-%
-\large
-T.R. Marsh$^{\mathrm{a},*}$,
-S.R. Duck$^{\mathrm{b},1}$\\[12pt]
-%
-\small\itshape
-$^a$University of Southampton, Department of Physics,\\
-Highfield, Southampton SO17 1BJ, UK\\
-$^b$University of Oxford, Department of Physics, Nuclear Physics\\
-Laboratory, Keble Road, Oxford, OX1 3RH, UK
- 
-\end{center}
-
-\bigskip
-\leftskip=0pt
-
-\hrule\vskip 8pt
-\begin{small}
-{\bfseries Abstract}
-\parindent 1em
-
-FO Aqr is a close binary star in
-which a magnetic white dwarf accretes from a cool companion. Light
-curves and spectra show variations on the orbital frequency, the
-white dwarf's spin frequency and combinations of the two.
-
-\noindent\textit{Key words:}
-Accretion, accretion disks, Line: profiles,
-Binaries: close, Novae, cataclysmic variables\\
-\textit{PACS:} 97.10.Gz, 97.30.Qt, 97.80.Gm 
-\end{small}
-%
-\vskip 10pt\hrule 
-
-\leftskip=0pt
-
-\vspace{24pt}
-
-\textbf{Introduction}
-
-FO Aqr is a member of the DQ~Her class of stars which
-are close binary stars in which a magnetic white dwarf accretes from
-a late-type main-sequence secondary star. These stars have most
-recently been reviewed by Patterson (1994). 
-
-\begin{footnotesize}
-\leavevmode
-\rlap{$^*$}\hspace{1pc}Corresponding author.\\
-\rlap{$^1$}\hspace{1pc}Present address: Systems Engineering and
-Assessment Ltd., Beckington Castle, PO Box 800, Bath BA3 6TB, UK.\\
-\rlap{}\hspace{1pc}\textit{Email addresses:} trm@astro.soton.ac.uk
-(T.R. Marsh), srd@sea.co.uk (S.R. Duck).
-\end{footnotesize}
-
-\leavevmode\hbox to \hsize{\small\slshape Preprint submitted to New Astronomy
-\hfil 21 August 1997}
-
-\end{minipage}
-
-\bigskip
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:implinput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-\caption{Article opening with implicit links (input)\label{ex:implinput}}
-\vspace{1pc}
-
-\begin{verbatim}
-\documentclass{elsart}
-
-\begin{document}
-\begin{frontmatter}
-\title{Integrability in
-       random matrix models\thanksref{talk}}
-\thanks[talk]{Expanded version of a talk
-  presented at the Singapore Meeting on
-  Particle Physics (Singapore, August 1990).}
-
-\author{L. Alvarez-Gaum\'{e}\corauthref{cor}}
-\address{Theory Division, CERN,
-  CH-1211 Geneva 23, Switzerland}
-\corauth[cor]{Corresponding author.}
-\ead{lag@cern.ch}
-
-\author{C. Gomez\corauthref{cor}\thanksref{SNSF}}
-\address{D\'{e}partment de Physique Th\'{e}orique, 
-  Universit\'{e} de Gen\`{e}ve,
-  CH-1211 Geneva 4, Switzerland}
-\ead{cg@ug.ch}
-
-\author{J. Lacki}
-\address{School of Natural Sciences,
-  Institute for Advanced Study,
-  Princeton, NJ 08540, USA}
-\ead[url]{www.ias.edu/~jl}
-\thanks[SNSF]{Supported by the
-  Swiss National Science Foundation}
-
-\begin{abstract}
-We prove the equivalence between the recent matrix
-model formulation of 2D gravity and lattice
-integrable models.  For even potentials this
-system is the Volterra hierarchy.
-\end{abstract}
-\end{frontmatter}
-
-\section{Introduction}
-Some aspects of the recently discovered
-non-perturbative solutions to non-critical strings
-\cite{Patterson94} can be better understood and
-clarified directly in terms of the integrability
-properties of the random matrix model.
-...
-\end{verbatim}
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:imploutput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-\caption{Article opening with implicit links (output)\label{ex:imploutput}}
-\vspace{1pc}
-
-\begin{minipage}{\textwidth}
-\elsartstyle
-%
-\renewcommand{\thempfootnote}{\fnstar{mpfootnote}}
-%
-\leftskip=2pc
-%
-\begin{center}
-{\LARGE Integrability in random matrix models$^\star$}\\[30pt]
-\footnotetext[1]{\upshape Expanded version of a talk presented at the
-Singapore Meeting on Particle Physics (Singapore, August 1990).}
-%
-\large
-L. Alvarez-Gaum\'{e}$^*$         \\[6pt]
-{\small\itshape Theory Division, CERN,
-  CH-1211 Geneva 23, Switzerland}\\[18pt]
-C. Gomez$^{*,1}$                   \\[6pt]
-{\small\itshape D\'{e}partment de Physique Th\'{e}orique, 
-  Universit\'{e} de Gen\`{e}ve,
-  CH-1211 Geneva 4, Switzerland} \\[15pt]
-J. Lacki                         \\[6pt]
-{\small\itshape School of Natural Sciences, Institute for Advanced Study,
-  Princeton, NJ 08540, USA}
-% BW:
-\end{center}
-%
-\renewcommand{\thempfootnote}{\astsymbol{mpfootnote}}
-\footnotetext[1]{Corresponding author.}
-\setbox0=\hbox{\footnotesize 1}
-\edef\thempfootnote{\hskip\wd0}
-\footnotetext[0]{\textit{Email adresses:} lag@cern.ch
-  (L. Alvarez-Gaum\'{e}), cg@ug.ch (C. Gomez).}
-\footnotetext[1]{\textit{URL:} www.ias.edu/\~{ }jl (J. Lacki).}
-\renewcommand{\thempfootnote}{\arabic{mpfootnote}}
-\footnotetext[1]{Supported by the Swiss National Science Foundation}
-
-\bigskip
-\leftskip=0pt
-
-\hrule\vskip 8pt
-\begin{small}
-{\bfseries Abstract}
-\parindent 1em
-
-We prove the equivalence between the recent matrix model
-formulation of 2D gravity and lattice integrable models. For even
-potentials this system is the Volterra hierarchy.\par
-\end{small}
-\vskip 10pt\hrule 
-
-\medskip
-
-\section*{1. Introduction}
-
-Some aspects of the recently discovered non-perturbative
-solutions to non-critical strings (Patterson, 1994) can be better
-understood and clarified directly in terms of the
-integrability properties of the random matrix model.
-
-...
-\end{minipage}
-
-\bigskip
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%% end of figures %%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{Abstract}
-
-The abstract should be self-contained. Therefore, do not refer to the
-list of references. Instead, quote the reference in full, as follows:
-Wettig \& Brown (1996, NewA, 1, 17).
-
-\section{Keywords}
-\label{keywd}
-\enlargethispage*{2.5pc}
-
-In electronic publications a proper classification is more important
-than ever. Elsevier's physics journals use several keyword
-schemes:\ 
-
-\begin{description}
-\item[Keywords:] Uncontrolled keywords.
-\item[PACS:] The PACS scheme, developed and maintained by the AIP,
-covers the whole field of Physics.
-See \url{http://www.aip.org/pacs/pacs.html}
-or \url{http://www.elsevier.com/locate/pacs}.
-\item[MSC:] The MSC scheme, developed and maintained by the AMS,
-covers the whole field of Mathematics.
-See \url{http://www.ams.org/msc}
-or \url{http://www.elsevier.com/locate/msc}.
-\end{description}
-
-Keywords are entered below the abstract in the following way:
-\pagebreak[4]
-\begin{verbatim}
-\begin{keyword}
-Keyword \sep Keyword
-\PACS PACS code \sep PACS code
-\MSC MSC code \sep MSC code
-\end{keyword}
-\end{verbatim}
-
-\section{Cross-references}
-\label{xrefs}
-
-In electronic publications articles may be internally hyperlinked.
-Hyperlinks are generated from proper cross-references in the article.
-
-For example, the words Fig. 1 will never be more than simple text,
-whereas the proper cross-reference \verb|\ref{mapfigure}| may be
-turned into a hyperlink to the figure itself.
-
-In the same way, the words Governato et al. (1997) will fail to
-turn into a hyperlink; the proper cross-reference is 
-\verb|\citet{Gea97}|.
-
-Cross-referencing is possible in \LaTeX{} for sections, subsections,
-formulae, figures, tables, and literature references.
-
-\section{PostScript figures}
-\label{psfigs}
-
-\LaTeX{} and PostScript have had a long and successful relationship.
-There are three packages for including PostScript figures:
-\begin{itemize}
-\item \texttt{graphics}.
-This simple package provides the command\\
-\verb|\includegraphics*[<llx,lly>][<urx,ury>]{file}|.
-The \texttt{*} is optional; it enables the PostScript feature of clipping.
-In its simplest form,\\
-\verb|\includegraphics{file}|,
-it includes the figure in the PostScript file \texttt{file}
-without resizing.
-\item \texttt{graphicx}.
-This package provides the command\\
-\verb|\includegraphics*[key--value list]{file}|.
-The \texttt{*} is optional; it enables the PostScript feature of clipping.
-Often used keys are:
-\def\labelitemii{--}
-\begin{itemize}
-\item \texttt{scale=.40} to scale the size of the figure with 40\%,
-\item \texttt{width=25pc}, \texttt{height=15pc} to set the width or
-height of the figure,
-\item \texttt{angle=90} to rotate the figure over $90^\circ$.
-\end{itemize}
-\item \texttt{epsfig}.
-This package is really the \texttt{graphicx} package,
-but it allows one to include PostScript figures using 
-the familiar commands from 
-the earlier packages \texttt{epsfig} and \texttt{psfig}.
-\end{itemize}
-For detailed information, see the documentation of the \texttt{graphics}
-packages, in particular the file \texttt{grfguide.tex}.
-\begin{figure}
-\leftmargin=2pc
-\begin{verbatim}
-\begin{figure}
-\begin{center}
-\includegraphics*[width=5cm]{name.eps}
-\end{center}
-\caption{An example of a figure.}
-\label{fig:exmp}
-\end{figure}
-\end{verbatim} 
-\caption{An example of a figure.}
-\label{fig:exmp}
-\end{figure}
-
-\section{Mathematical symbols}
-\label{symbols}
-
-Many physics authors require more mathematical symbols than the
-few that are provided in standard \LaTeX. A useful package for
-additional symbols is the \texttt{amssymb} package, developed by the American
-Mathematical Society.  This package includes such oft used symbols as
-\verb|\lesssim| for $\lesssim$, \verb|\gtrsim| for $\gtrsim$ or
-\verb|\hbar| for $\hbar$.  Note that your \TeX{} system should have
-the \texttt{msam} and \texttt{msbm} fonts installed.
-If you need only a few symbols, such as \verb|\Box| for $\Box$,
-you might try the package \texttt{latexsym}.
-
-In the \texttt{elsart} document class vectors are preferably coded as 
-\verb|\vec{a}| instead of \verb|\bf{a}| or \verb|\pol{a}|.
-
-\section{Line numbering}
-\label{linenumbering}
-
-\begin{linenumbers}
-Reviewing an electronic version of an article has many
-advantages. However, reviewers have a harder task indicating remarks
-and desired changes to the article. Their task is made easier if the
-lines of the article are numbered. \LaTeX's \texttt{lineno} package
-performs this task. It is compatible with \texttt{elsart}.
-\end{linenumbers}
-
-\section{The Bibliography}
-\label{thebib}
-
-In \LaTeX{} literature references are listed in the
-\verb|thebibliography| environment. Each reference is a
-\verb|\bibitem|; each \verb|\bibitem| is identified by a label, by
-which it can be cited in the text:
-\verb|\bibitem[Elson et al.(1996)]{ESG96}|
-is cited as \verb|\citet{ESG96}|. In connection
-with cross-referencing and possible future hyperlinking it is not a
-good idea to collect more that one literature item in one
-\verb|\bibitem|.
-
-The so-called Harvard or author-year style of referencing is enabled by
-the \LaTeX{} package \texttt{natbib}. With this package the
-literature can be cited as follows:
-
-\begin{itemize}
-\item Parenthetical: \verb|\citep{WB96}| produces \citep{WB96}.
-\item Textual: \verb|\citet{ESG96}| produces \citet{ESG96}.
-\item An affix and part of a reference:
-   \verb|\citep[e.g.][Ch. 2]{Gea97}|
-   produces \citep[e.g.][Ch. 2]{Gea97}.
-\end{itemize}
-
-\section{Template article}
-\label{templart}
-
-There is a template article \file{templat-harv.tex}, which you can use as a
-skeleton for your own article. It is available from Elsevier's Author
-Gateway, \url{http://authors.elsevier.com/locate/latex}.
-
-\begin{thebibliography}{}
-
-\bibitem[Lamport(1986)]{Lamp86}
-Leslie Lamport: \LaTeX, {\em A document preparation system},
-2nd edition, Addison-Wesley (Reading, Massachusetts, 1994).
-
-\bibitem[Wettig \& Brown(1996)]{WB96}
-Wettig, T., \& Brown, G.E.,
-The evolution of relativistic binary pulsars,
-1996, NewA, 1, 17-34.
-
-\bibitem[Elson et al.(1996)]{ESG96}
-Elson, R.A.W., Santiago, B.X., \& Gilmore, G.F.,
-Halo stars, starbursts, and distant globular clusters:
-A survey of unresolved objects in the Hubble Deep Field,
-1996, NewA, 1, 1-16.
-% (\url{http://www.elsevier.com/PII/S1384107696000061})
-
-\bibitem[Governato et al.(1997)]{Gea97}
-Governato, F., Moore, B., Cen, R., Stadel, J., Lake, G., \& Quinn, T.,
-The Local Group as a test of cosmological models,
-1997, NewA 2, 91-106.
-
-\end{thebibliography}
-
-\end{document}
diff --git a/Master/texmf-dist/doc/latex/elsevier/instructions-num.pdf b/Master/texmf-dist/doc/latex/elsevier/instructions-num.pdf
deleted file mode 100644
index 8a42c272f76..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/instructions-num.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/elsevier/instructions-num.tex b/Master/texmf-dist/doc/latex/elsevier/instructions-num.tex
deleted file mode 100644
index 48de5c0e93b..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/instructions-num.tex
+++ /dev/null
@@ -1,774 +0,0 @@
-\documentclass{elsart}
-\usepackage{ifpdf}
-\usepackage{graphicx,amssymb,lineno}
-\ifpdf
-\usepackage[%
-  pdftitle={Instructions for use of the document class
-    elsart},%
-  pdfauthor={Simon Pepping},%
-  pdfsubject={The preprint document class elsart},%
-  pdfkeywords={instructions for use, elsart, document class},%
-  pdfstartview=FitH,%
-  bookmarks=true,%
-  bookmarksopen=true,%
-  breaklinks=true,%
-  colorlinks=true,%
-  linkcolor=blue,anchorcolor=blue,%
-  citecolor=blue,filecolor=blue,%
-  menucolor=blue,pagecolor=blue,%
-  urlcolor=blue]{hyperref}
-\else
-\usepackage[%
-  breaklinks=true,%
-  colorlinks=true,%
-  linkcolor=blue,anchorcolor=blue,%
-  citecolor=blue,filecolor=blue,%
-  menucolor=blue,pagecolor=blue,%
-  urlcolor=blue]{hyperref}
-\fi
-
-\renewcommand\floatpagefraction{.2}
-\makeatletter
-\def\elsartstyle{%
-    \def\normalsize{\@setfontsize\normalsize\@xiipt{14.5}}
-    \def\small{\@setfontsize\small\@xipt{13.6}}
-    \let\footnotesize=\small
-    \def\large{\@setfontsize\large\@xivpt{18}}
-    \def\Large{\@setfontsize\Large\@xviipt{22}}
-    \skip\@mpfootins = 18\p@ \@plus 2\p@
-    \normalsize
-}
-\@ifundefined{square}{}{\let\Box\square}
-\makeatother
-
-\def\file#1{\texttt{#1}}
-
-\pagestyle{plain}
-\begin{document}
-
-\begin{frontmatter}
-\title{Instructions for use\\of the document class \file{elsart}}
-
-\author{Simon Pepping}
-\address{Elsevier, P.O. Box 103, 1000 AC Amsterdam,
-Netherlands}
-
-\ead{s.pepping@elsevier.com}
-\ead[url]{authors.elsevier.com/locate/latex}
-
-\begin{abstract}
-This article discusses several features of preparing articles
-with the \file{elsart} document style, using numbered style bibliographic
-references.
-\end{abstract}
-
-\begin{keyword}
-\file{elsart}, document class, instructions for use
-\PACS 01.30.$-$y
-\end{keyword}
-\end{frontmatter}
-
-\section{Introduction}
-\label{intro}
-
-This article discusses how to prepare articles with the \file{elsart}
-document class.  For more general information about \LaTeX{}, see the
-\LaTeX{} manual written by Lamport \cite{Lamp86}.
-
-Elsevier has prepared the following \LaTeX{} support files for
-authors:
-\begin{itemize}
-\item The document class \file{elsart.cls}, which provides a preprint
-  layout.
-\item The document classes \file{elsart1p.cls}, \file{elsart3p.cls},
-  \file{elsart5p.cls}, which each provide a layout in one of
-  Elsevier's standard journal styles, called 1+, 3+ and 5+.
-\item The instructions for use of \file{elsart},
-  \file{instructions-harv} for use with a Harvard-style bibliography,
-  and \file{instructions-num} for use with a numbered style
-  bibliography.
-\item Template files for a quick start of your \LaTeX{} article with
-  \file{elsart},
-  \newline
-  \file{template-harv.tex} for use with a Harvard-style
-  bibliography, and
-  \newline
-  \file{template-num.tex} for use with a numbered
-  style bibliography.
-\item Styles for BibTeX, \file{elsart-harv.bst} for a Harvard-style
-  bibliography, and \file{elsart-num.bst} for a numbered style
-  bibliography.
-\end{itemize}
-The files are freely available from Elsevier's Author Gateway
-\url{http://authors.elsevier.com/locate/latex}. 
-
-On Elsevier's Author Gateway you will also find support files for CRC
-journal articles. Support for monographs or contributed book chapters
-may be obtained via the publisher of the book.
-
-Elsevier's \LaTeX{} support files can also be obtained from one of the
-servers of the Comprehensive TeX Archive Network (CTAN) in the
-directory\newline
-\href{ftp://ctan.tug.org/tex-archive/macros/latex/contrib/supported/elsevier}%
-{\texttt{/tex-archive/macros/latex/contrib/supported/elsevier}}. CTAN is a
-mirrored network of FTP servers, with the following web front ends:
-\href{http://www.tex.ac.uk}{\texttt{www.tex.ac.uk}},
-\href{http://www.dante.de/software/ctan}{\texttt{www.dante.de/software/ctan}}
-(in German) and \href{http://www.ctan.org}{\texttt{www.ctan.org}}. The
-network is widely mirrored, see
-\url{http://www.tug.org/tex-archive/CTAN.sites}. It holds up-to-date
-copies of all the public-domain versions of \TeX, \LaTeX, Metafont and
-ancillary programs.
-
-Note that CTAN is not related to Elsevier, and that Elsevier's author
-support cannot accept complaints or answer questions about the
-availability of any CTAN server.
-
-The non-Elsevier macro packages recommended later in this document and
-many other useful macro packages can also be obtained from CTAN.
-
-In the following sections we show how you may use the \file{elsart}
-document class.
-
-\section{Options}
-
-The \file{elsart} document class enables the following options:
-
-\begin{description}
-  
-\item[doublespacing, reviewcopy] This is a single option with two
-  names to obtain double line spacing, as is sometimes required for
-  copies submitted for review.
-  
-\item[seceqn, secthm] The option \texttt{seceqn} numbers the equation
-  environments per section. The option \texttt{secthm} does the same
-  for the \texttt{thm} environment. In elsart all predefined theorem
-  environments except Algorithm, Note, Summary and Case use the same
-  counter as the \texttt{thm} environment.
-
-\item[draft, final] As in many other document classes, these are
-  options to produce draft and final layout. In the draft layout you
-  will see warnings for overfull boxes. You also need draft layout to
-  test your formulas on a narrower display width, see option
-  \texttt{narrowdisplay}.
-  
-\item[narrowdisplay] Many Elsevier journals print their text in two
-  columns. Because the preprint layout uses a larger line width
-  than such columns, the formulas are too wide for the line width in
-  print. In draft mode (see the \texttt{draft} option) you can use the
-  \texttt{narrowdisplay} option to force a narrower width for
-  displayed formulas. The width is roughly equal to the column width
-  of the printed journals, compensated for the larger font size of the
-  preprint layout. The \texttt{narrowdisplay} option is ineffective
-  with packages which redefine the equation environments, such as
-  \texttt{amsmath}.
-  
-  The \texttt{narrowdisplay} option is especially useful for journals
-  for which the articles are printed from the author's \LaTeX{} file.
-  This is the case for a number of mathematics journals. When you
-  break your formulas such that they fit in the narrow column width,
-  the typesetter will be able to retain most of your breaks. Article
-  for other journals are printed after transformation to an XML file.
-  For such journals the formula layout in the \LaTeX{} file is always
-  lost in the transformation.
-  
-  The narrow display width is obtained by giving the formulas a larger
-  indent. Too wide formulas in the one-line display environments
-  \texttt{equation} and \texttt{displaymath} will show an overfull
-  rule:
-  
-  \def\testformula{%
-    \sum_{i=0}^{\infty}A^n\int \mathrm{d}x\, \frac{F_n(x)}{A_n + B_n} =
-    B^n C^n \int\mathrm{d}x\,\int \mathrm{d}y\,
-    \frac{G_n(x,y)}{\mathcal{A}_n{x} + \mathcal{B}_n{y}}
-    }
-  \overfullrule 5pt
-  \mathindent\linewidth\relax
-  \advance\mathindent-259pt
-  \begin{equation}
-    \label{eq:1}
-    \testformula.
-  \end{equation}
-
-  This is not the case for the multiline display environment
-  \texttt{eqnarray}. But in both cases too wide formulas will extend
-  into the right margin, giving you visual feedback:
-
-  \begin{eqnarray}
-    \label{eq:2}
-    \testformula,\nonumber\\
-    \testformula.
-  \end{eqnarray}
-
-  When you switch off draft mode, the formulas will have their normal
-  indentation, and too wide formulas will no longer be signalled.
-
-\end{description}
-
-\section{Print layout}
-\label{printlayout}
-
-Elsevier also makes available a few document classes that roughly
-reproduce the layout of the printed journals. The majority of Elsevier
-journals use one of a small set of standard layouts. We have document
-classes for three of those layouts:
-
-\begin{description}
-\item[elsart1p] text width 32 picas (134 mm), text height 47 lines,
-  one column.
-\item[elsart3p] text width 39 picas (164 mm), text height 51 lines,
-  one or two columns.
-\item[elsart5p] text width 43.5 picas (183 mm), text height 57 lines,
-  two columns.
-\end{description}
-
-These classes can be used in the same way as elsart. If you prepared
-an article for elsart, you can run it with one of these print layout
-classes without changes to the markup. In fact, they use elsart and
-you must have elsart on your system as well.
-
-Note that the layout is only roughly the same as that of the printed
-journal. One major source of differences is the font. The printer uses
-a different font with different character widths, which will cause
-deviations in layout. There are various other sources of small
-differences. You cannot use the layout of one of these classes to make
-claims on the final layout of your article.
-
-\section{Frontmatter}
-\label{frontmatter}
-
-The \texttt{elsart} document class has a separate 
-\texttt{frontmatter} environment for the title, authors, addresses,
-abstract and keywords.
-\begin{itemize}
-\item \verb|\title|: As in standard \LaTeX, e.g. 
-\verb|\title{Model}|.
-\item \verb|\author|: Different from standard \LaTeX, the \verb|\author|
-command contains only one author and no address.
-Multiple authors go into multiple \verb|\author| commands,
-separated from each other by commas.
-The address goes into a separate 
-\verb|\address| command.
-Example: \verb|\author{D.E. Knuth}|.
-\item \verb|\address|: Here goes the address, e.g. 
-\verb|\address{CERN, Geneva}|.
-\item \verb|\thanks| and \verb|\thanksref|: 
-These provide footnotes to the title, authors and addresses. 
-The \verb|\thanksref| command takes a label: \verb|\thanksref{label}|
-to relate it to the \verb|\thanks| command with 
-the same label: \verb|\thanks[label]|. There can be several
-references to a single \verb|\thanks| command. Example:\\
-\verb|\title{Model\thanksref{titlefn}}| and\\
-\verb|\thanks[titlefn]{Supported by grants.}|
-\item \verb|\corauth| and \verb|\corauthref|: 
-These provide footnotes to mark the corresponding author and the
-correspondence address. They are used in the same manner as
-\verb|\thanks| and \verb|\thanksref|. Example:\\
-\verb|\author{A. Name\corauthref{cor}}| and\\
-\verb|\corauth[cor]{Corresponding author. Address: ... .}|
-\item \verb|\ead|:
-This command should be used for the email address or the URL of the
-author. It refers to the `current author', i.e., the author last
-mentioned before the command.
-When it holds a URL, this should be indicated by setting the
-optional argument to `url'. Example:
-\verb|\ead{s.pepping@elsevier.com}|,
-\verb|\ead[url]{authors.elsevier.com/locate/latex}|.
-\end{itemize}
-
-It is not necessary to give a \verb|\maketitle| command. The title,
-authors and addresses are printed as soon as \TeX{} sees them.
-
-The authors and addresses can be combined in one of two ways:
-\begin{itemize}
-\item The simplest way lists the authors of one address or one group
-  of addresses, followed by the address or addresses, and so on for
-  all addresses or groups of addresses.
-\item The other way first lists all authors, and then all addresses.
-The authors and addresses are related to each other by labels:
-\verb|\author[label1]{Name1}| corresponds to
-\verb|\address[label1]{Address1}|. Example:
-\begin{verbatim}
-\author[South]{T.R. Marsh},
-\author[Oxford]{S.R. Duck}
-\address[South]{University of Southampton, UK}
-\address[Oxford]{University of Oxford, UK}
-\end{verbatim}
-\end{itemize}
-
-See the extensive examples in figs.
-\ref{ex:explinput}, \ref{ex:exploutput}, 
-\ref{ex:implinput}, \ref{ex:imploutput}.
-
-If you put the frontmatter in an included file, that file should
-contain the whole frontmatter, including its \texttt{begin} and
-\texttt{end} commands. Otherwise, the labels of the frontmatter will
-remain undefined.
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:explinput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-
-\caption{Article opening with explicit links (input)} \label{ex:explinput}
-\vspace{1pc}
-
-\begin{verbatim}
-\documentclass{elsart}
-\usepackage{graphicx,amssymb}
-\journal{New Astronomy}
-\begin{document}
-\begin{frontmatter}
-
-\title{Stroboscopic Doppler tomography of FO Aqr}
-\author[South]{T.R. Marsh\corauthref{cor}},
-\corauth[cor]{Corresponding author.}
-\ead{trm@astro.soton.ac.uk}
-
-\author[Oxford]{S.R. Duck\thanksref{now}}
-\thanks[now]{Present address: Systems Engineering and Assessment Ltd.,
-Beckington Castle, PO Box 800, Bath BA3 6TB, UK.}
-\ead{srd@sea.co.uk}
-
-\address[South]{University of Southampton, Department of Physics,
-Highfield, Southampton SO17 1BJ, UK} 
-\address[Oxford]{University of Oxford, Department of Physics, Nuclear
-Physics Laboratory, Keble Road, Oxford, OX1 3RH, UK}
- 
-\begin{abstract} 
-FO Aqr is a close binary star in
-which a magnetic white dwarf accretes from a cool companion. Light
-curves and spectra show variations on the orbital frequency, the
-white dwarf's spin frequency and combinations of the two.
-\end{abstract}
-\begin{keyword}
-Accretion, accretion disks \sep Line: profiles \sep
-Binaries: close \sep Novae, cataclysmic variables 
-\PACS 97.10.Gz \sep 97.30.Qt \sep 97.80.Gm 
-\end{keyword}
-\end{frontmatter}
-
-\section{Introduction}
-FO Aqr is a member of the DQ~Her class of stars which
-are close binary stars in which a magnetic white dwarf accretes from
-a late-type main-sequence secondary star. These stars have most
-recently been reviewed in Ref. \cite{Patterson94}. 
-\end{verbatim}
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:exploutput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-\caption{Article opening with explicit links (output)\label{ex:exploutput}} 
-\vspace{1pc}
-
-\begin{minipage}{\textwidth}
-\elsartstyle
-\parskip 12pt
-%
-\renewcommand{\thempfootnote}{\fnsymbol{mpfootnote}}
-%
-\leftskip=2pc
-%
-\begin{center}
-{\LARGE Stroboscopic Doppler tomography of FO Aqr}\\[30pt]
-%
-\large
-T.R. Marsh$^{\mathrm{a},*}$,
-S.R. Duck$^{\mathrm{b},1}$\\[12pt]
-%
-\small\itshape
-$^a$University of Southampton, Department of Physics,\\
-Highfield, Southampton SO17 1BJ, UK\\
-$^b$University of Oxford, Department of Physics, Nuclear Physics\\
-Laboratory, Keble Road, Oxford, OX1 3RH, UK
- 
-\end{center}
-
-\bigskip
-\leftskip=0pt
-
-\hrule\vskip 8pt
-\begin{small}
-{\bfseries Abstract}
-\parindent 1em
-
-FO Aqr is a close binary star in
-which a magnetic white dwarf accretes from a cool companion. Light
-curves and spectra show variations on the orbital frequency, the
-white dwarf's spin frequency and combinations of the two.
-
-\noindent\textit{Key words:}
-Accretion, accretion disks, Line: profiles,
-Binaries: close, Novae, cataclysmic variables\\
-\textit{PACS:} 97.10.Gz, 97.30.Qt, 97.80.Gm 
-\end{small}
-%
-\vskip 10pt\hrule 
-
-\leftskip=0pt
-
-\vspace{24pt}
-
-\textbf{Introduction}
-
-FO Aqr is a member of the DQ~Her class of stars which
-are close binary stars in which a magnetic white dwarf accretes from
-a late-type main-sequence secondary star. These stars have most
-recently been reviewed in Ref. [1]. 
-
-\begin{footnotesize}
-\leavevmode
-\rlap{$^*$}\hspace{1pc}Corresponding author.\\
-\rlap{$^1$}\hspace{1pc}Present address: Systems Engineering and
-Assessment Ltd., Beckington Castle, PO Box 800, Bath BA3 6TB, UK.\\
-\rlap{}\hspace{1pc}\textit{Email addresses:} trm@astro.soton.ac.uk
-(T.R. Marsh), srd@sea.co.uk (S.R. Duck).
-\end{footnotesize}
-
-\leavevmode\hbox to \hsize{\small\slshape Preprint submitted to New Astronomy
-\hfil 21 August 1997}
-
-\end{minipage}
-
-\bigskip
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:implinput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-\caption{Article opening with implicit links (input)\label{ex:implinput}}
-\vspace{1pc}
-
-\begin{verbatim}
-\documentclass{elsart}
-
-\begin{document}
-\begin{frontmatter}
-\title{Integrability in
-       random matrix models\thanksref{talk}}
-\thanks[talk]{Expanded version of a talk
-  presented at the Singapore Meeting on
-  Particle Physics (Singapore, August 1990).}
-
-\author{L. Alvarez-Gaum\'{e}\corauthref{cor}}
-\address{Theory Division, CERN,
-  CH-1211 Geneva 23, Switzerland}
-\corauth[cor]{Corresponding author.}
-\ead{lag@cern.ch}
-
-\author{C. Gomez\corauthref{cor}\thanksref{SNSF}}
-\address{D\'{e}partment de Physique Th\'{e}orique, 
-  Universit\'{e} de Gen\`{e}ve,
-  CH-1211 Geneva 4, Switzerland}
-\ead{cg@ug.ch}
-
-\author{J. Lacki}
-\address{School of Natural Sciences,
-  Institute for Advanced Study,
-  Princeton, NJ 08540, USA}
-\ead[url]{www.ias.edu/~jl}
-\thanks[SNSF]{Supported by the
-  Swiss National Science Foundation}
-
-\begin{abstract}
-We prove the equivalence between the recent matrix
-model formulation of 2D gravity and lattice
-integrable models.  For even potentials this
-system is the Volterra hierarchy.
-\end{abstract}
-\end{frontmatter}
-
-\section{Introduction}
-Some aspects of the recently discovered
-non-perturbative solutions to non-critical strings
-\cite{Patterson94} can be better understood and
-clarified directly in terms of the integrability
-properties of the random matrix model.
-...
-\end{verbatim}
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%ex:imploutput%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\begin{figure}[p]
-\caption{Article opening with implicit links (output)\label{ex:imploutput}}
-\vspace{1pc}
-
-\begin{minipage}{\textwidth}
-\elsartstyle
-%
-\renewcommand{\thempfootnote}{\fnstar{mpfootnote}}
-%
-\leftskip=2pc
-%
-\begin{center}
-{\LARGE Integrability in random matrix models$^\star$}\\[30pt]
-\footnotetext[1]{\upshape Expanded version of a talk presented at the
-Singapore Meeting on Particle Physics (Singapore, August 1990).}
-%
-\large
-L. Alvarez-Gaum\'{e}$^*$         \\[6pt]
-{\small\itshape Theory Division, CERN,
-  CH-1211 Geneva 23, Switzerland}\\[18pt]
-C. Gomez$^{*,1}$                   \\[6pt]
-{\small\itshape D\'{e}partment de Physique Th\'{e}orique, 
-  Universit\'{e} de Gen\`{e}ve,
-  CH-1211 Geneva 4, Switzerland} \\[15pt]
-J. Lacki                         \\[6pt]
-{\small\itshape School of Natural Sciences, Institute for Advanced Study,
-  Princeton, NJ 08540, USA}
-% BW:
-\end{center}
-%
-\renewcommand{\thempfootnote}{\astsymbol{mpfootnote}}
-\footnotetext[1]{Corresponding author.}
-\setbox0=\hbox{\footnotesize 1}
-\edef\thempfootnote{\hskip\wd0}
-\footnotetext[0]{\textit{Email adresses:} lag@cern.ch
-  (L. Alvarez-Gaum\'{e}), cg@ug.ch (C. Gomez).}
-\footnotetext[1]{\textit{URL:} www.ias.edu/\~{ }jl (J. Lacki).}
-\renewcommand{\thempfootnote}{\arabic{mpfootnote}}
-\footnotetext[1]{Supported by the Swiss National Science Foundation}
-
-\bigskip
-\leftskip=0pt
-
-\hrule\vskip 8pt
-\begin{small}
-{\bfseries Abstract}
-\parindent 1em
-
-We prove the equivalence between the recent matrix model
-formulation of 2D gravity and lattice integrable models. For even
-potentials this system is the Volterra hierarchy.\par
-\end{small}
-\vskip 10pt\hrule 
-
-\medskip
-
-\section*{1. Introduction}
-
-Some aspects of the recently discovered non-perturbative
-solutions to non-critical strings [1] can be better
-understood and clarified directly in terms of the
-integrability properties of the random matrix model.
-
-...
-\end{minipage}
-
-\bigskip
-
-\end{figure}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%% end of figures %%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\section{Abstract}
-
-The abstract should be self-contained. Therefore, do not refer to the
-list of references. Instead, quote the reference in full, as follows:
-Wettig \& Brown (1996, NewA, 1, 17).
-
-\section{Keywords}
-\label{keywd}
-\enlargethispage*{2.5pc}
-
-In electronic publications a proper classification is more important
-than ever. Elsevier's physics journals use several keyword
-schemes:\ 
-
-\begin{description}
-\item[Keywords:] Uncontrolled keywords.
-\item[PACS:] The PACS scheme, developed and maintained by the AIP,
-covers the whole field of Physics.
-See \url{http://www.aip.org/pacs/pacs.html}
-or \url{http://www.elsevier.com/locate/pacs}.
-\item[MSC:] The MSC scheme, developed and maintained by the AMS,
-covers the whole field of Mathematics.
-See \url{http://www.ams.org/msc}
-or \url{http://www.elsevier.com/locate/msc}.
-\end{description}
-
-Keywords are entered below the abstract in the following way:
-\pagebreak[4]
-\begin{verbatim}
-\begin{keyword}
-Keyword \sep Keyword
-\PACS PACS code \sep PACS code
-\MSC MSC code \sep MSC code
-\end{keyword}
-\end{verbatim}
-
-\section{Cross-references}
-\label{xrefs}
-
-In electronic publications articles may be internally hyperlinked.
-Hyperlinks are generated from proper cross-references in the article.
-
-For example, the words Fig. 1 will never be more than simple text,
-whereas the proper cross-reference \verb|\ref{mapfigure}| may be
-turned into a hyperlink to the figure itself.
-
-In the same way, the words Ref. [1] will fail to
-turn into a hyperlink; the proper cross-reference is 
-\verb|\cite{Gea97}|.
-
-Cross-referencing is possible in \LaTeX{} for sections, subsections,
-formulae, figures, tables, and literature references.
-
-\section{PostScript figures}
-\label{psfigs}
-
-\LaTeX{} and PostScript have had a long and successful relationship.
-There are three packages for including PostScript figures:
-\begin{itemize}
-\item \texttt{graphics}.
-This simple package provides the command\\
-\verb|\includegraphics*[<llx,lly>][<urx,ury>]{file}|.
-The \texttt{*} is optional; it enables the PostScript feature of clipping.
-In its simplest form,\\
-\verb|\includegraphics{file}|,
-it includes the figure in the PostScript file \texttt{file}
-without resizing.
-\item \texttt{graphicx}.
-This package provides the command\\
-\verb|\includegraphics*[key--value list]{file}|.
-The \texttt{*} is optional; it enables the PostScript feature of clipping.
-Often used keys are:
-\def\labelitemii{--}
-\begin{itemize}
-\item \texttt{scale=.40} to scale the size of the figure with 40\%,
-\item \texttt{width=25pc}, \texttt{height=15pc} to set the width or
-height of the figure,
-\item \texttt{angle=90} to rotate the figure over $90^\circ$.
-\end{itemize}
-\item \texttt{epsfig}.
-This package is really the \texttt{graphicx} package,
-but it allows one to include PostScript figures using 
-the familiar commands from 
-the earlier packages \texttt{epsfig} and \texttt{psfig}.
-\end{itemize}
-For detailed information, see the documentation of the \texttt{graphics}
-packages, in particular the file \texttt{grfguide.tex}.
-\begin{figure}
-\leftmargin=2pc
-\begin{verbatim}
-\begin{figure}
-\begin{center}
-\includegraphics*[width=5cm]{name.eps}
-\end{center}
-\caption{An example of a figure.}
-\label{fig:exmp}
-\end{figure}
-\end{verbatim} 
-\caption{An example of a figure.}
-\label{fig:exmp}
-\end{figure}
-
-\section{Mathematical symbols}
-\label{symbols}
-
-Many physics authors require more mathematical symbols than the
-few that are provided in standard \LaTeX. A useful package for
-additional symbols is the \texttt{amssymb} package, developed by the American
-Mathematical Society.  This package includes such oft used symbols as
-\verb|\lesssim| for $\lesssim$, \verb|\gtrsim| for $\gtrsim$ or
-\verb|\hbar| for $\hbar$.  Note that your \TeX{} system should have
-the \texttt{msam} and \texttt{msbm} fonts installed.
-If you need only a few symbols, such as \verb|\Box| for $\Box$,
-you might try the package \texttt{latexsym}.
-
-In the \texttt{elsart} document class vectors are preferably coded as 
-\verb|\vec{a}| instead of \verb|\bf{a}| or \verb|\pol{a}|.
-
-\section{Line numbering}
-\label{linenumbering}
-
-\begin{linenumbers}
-Reviewing an electronic version of an article has many
-advantages. However, reviewers have a harder task indicating remarks
-and desired changes to the article. Their task is made easier if the
-lines of the article are numbered. \LaTeX's \texttt{lineno} package
-performs this task. It is compatible with \texttt{elsart}.
-\end{linenumbers}
-
-\section{The Bibliography}
-\label{thebib}
-
-In \LaTeX{} literature references are listed in the
-\verb|thebibliography| environment. Each reference is a
-\verb|\bibitem|; each \verb|\bibitem| is identified by a label, by
-which it can be cited in the text: \verb|\bibitem{ESG96}| is cited as
-\verb|\cite{ESG96}|.
-
-Version 2.16 of \texttt{elsart} introduces the \texttt{subbibitems}
-environment. The references in a \texttt{subbibitems} environment
-have the same major reference number, and are counted by letters
-a, b, etc. The \texttt{subbibitems} environment has
-a label of its own: \verb|\begin{subbibitems}{label}|. 
-It can therefore be referred to as \verb|\cite{label}|, which produces
-a citation like [7a--c]. A short citation like [7] can be produced by
-adding \texttt{:s} to the label: \verb|\cite{label:s}|. Example: See
-Refs. \cite{Lee}, or in short form, see Refs. \cite{Lee:s}.
-
-Version 2.16 of \texttt{elsart} also introduces the possibility to
-insert notes into the bibliography, by using the \verb|\note| command.
-In a \texttt{subbibitems} environment it must be the last item.
-Example: See Refs. \cite{note,x}.
-
-These options do not work well with the \texttt{natbib} package.
-
-\section{Template article}
-\label{templart}
-
-There is a template article \file{templat-num.tex}, which you can use as a
-skeleton for your own article. It is available from Elsevier's Author
-Gateway, \url{http://authors.elsevier.com/locate/latex}.
-
-\begin{thebibliography}{9}
-
-\bibitem{Lamp86}
-Leslie Lamport: \LaTeX, {\em A document preparation system},
-2nd edition, Addison-Wesley (Reading, Massachusetts, 1994).
-
-\bibitem{WB96}
-Wettig, T., \& Brown, G.E.,
-The evolution of relativistic binary pulsars,
-1996, NewA, 1, 17-34.
-
-\bibitem{ESG96}
-Elson, R.A.W., Santiago, B.X., \& Gilmore, G.F.,
-Halo stars, starbursts, and distant globular clusters:
-A survey of unresolved objects in the Hubble Deep Field,
-1996, NewA, 1, 1-16.
-% (\url{http://www.elsevier.com/PII/S1384107696000061})
-
-\bibitem{Gea97}
-Governato, F., Moore, B., Cen, R., Stadel, J., Lake, G., \& Quinn, T.,
-The Local Group as a test of cosmological models,
-1997, NewA 2, 91-106.
-
-\bibitem{note}%
-  \note We consider an exactly solvable two-band model of electrons moving in
-one dimension and interacting with a $\delta$-function spin-exchange
-potential.
-
-\begin{subbibitems}{Lee}
-\bibitem{Lee:a} N.~Nagaosa and P.~A.~Lee, Phys. Rev. Lett. {\bf 79}, 3755
-(1997).
-\bibitem{Lee:b}C.~P\'epin and P.~A.~Lee, Phys. Rev. Lett. {\bf 81},
-  2779 (1998).
-\end{subbibitems}
-
-\bibitem{x} K.~Gorny, O.~M.~Vyasilev,
-J.~A.~Marindale, V.~A.~Nandor, C.~H.~Pennington, P.~C.~Hammel,
-W.~L.~Hults, J.~L.~Smith, P.~L.~Kuhns, A.~P.~Reyes and W.~G.~Moulton,
-Phys. Rev. Lett.  {\bf 82}, 177 (1999).
-\note These references demonstrate that for some high-$T_c$ compounds
-the gap does not seem to depend on the magnetic field.
-
-\end{thebibliography}
-
-\end{document}
diff --git a/Master/texmf-dist/doc/latex/elsevier/template-harv.tex b/Master/texmf-dist/doc/latex/elsevier/template-harv.tex
deleted file mode 100644
index 44b3c84f680..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/template-harv.tex
+++ /dev/null
@@ -1,105 +0,0 @@
-% Template article for preprint document class `elsart'
-% with harvard style bibliographic references
-% SP 2006/04/26
-
-\documentclass{elsart}
-
-% Use the option doublespacing or reviewcopy to obtain double line spacing
-% \documentclass[doublespacing]{elsart}
-
-% the natbib package allows both number and author-year (Harvard)
-% style referencing;
-\usepackage{natbib}
-
-% if you use PostScript figures in your article
-% use the graphics package for simple commands
-% \usepackage{graphics}
-% or use the graphicx package for more complicated commands
-% \usepackage{graphicx}
-% or use the epsfig package if you prefer to use the old commands
-% \usepackage{epsfig}
-
-% The amssymb package provides various useful mathematical symbols
-\usepackage{amssymb}
-
-% The lineno packages adds line numbers. Start line numbering with
-% \begin{linenumbers}, end it with \end{linenumbers}. Or switch it on
-% for the whole article with \linenumbers.
-% \usepackage{lineno}
-
-% \linenumbers
-\begin{document}
-
-\begin{frontmatter}
-
-% Title, authors and addresses
-
-% use the thanksref command within \title, \author or \address for footnotes;
-% use the corauthref command within \author for corresponding author footnotes;
-% use the ead command for the email address,
-% and the form \ead[url] for the home page:
-% \title{Title\thanksref{label1}}
-% \thanks[label1]{}
-% \author{Name\corauthref{cor1}\thanksref{label2}}
-% \ead{email address}
-% \ead[url]{home page}
-% \thanks[label2]{}
-% \corauth[cor1]{}
-% \address{Address\thanksref{label3}}
-% \thanks[label3]{}
-
-\title{}
-
-% use optional labels to link authors explicitly to addresses:
-% \author[label1,label2]{}
-% \address[label1]{}
-% \address[label2]{}
-
-\author{}
-
-\address{}
-
-\begin{abstract}
-% Text of abstract
-
-\end{abstract}
-
-\begin{keyword}
-% keywords here, in the form: keyword \sep keyword
-
-% PACS codes here, in the form: \PACS code \sep code
-
-\end{keyword}
-
-\end{frontmatter}
-
-% main text
-\section{}
-\label{}
-
-% The Appendices part is started with the command \appendix;
-% appendix sections are then done as normal sections
-% \appendix
-
-% \section{}
-% \label{}
-
-% Bibliographic references with the natbib package:
-% Parenthetical: \citep{Bai92} produces (Bailyn 1992).
-% Textual: \citet{Bai95} produces Bailyn et al. (1995).
-% An affix and part of a reference:
-%   \citep[e.g.][Ch. 2]{Bar76}
-%   produces (e.g. Barnes et al. 1976, Ch. 2).
-
-\begin{thebibliography}{}
-
-% \bibitem[Names(Year)]{label} or \bibitem[Names(Year)Long names]{label}.
-% (\harvarditem{Name}{Year}{label} is also supported.)
-% Text of bibliographic item
-
-\bibitem[]{}
-
-\end{thebibliography}
-
-\end{document}
-
diff --git a/Master/texmf-dist/doc/latex/elsevier/template-num.tex b/Master/texmf-dist/doc/latex/elsevier/template-num.tex
deleted file mode 100644
index 24f204c7b2d..00000000000
--- a/Master/texmf-dist/doc/latex/elsevier/template-num.tex
+++ /dev/null
@@ -1,101 +0,0 @@
-% Template article for preprint document class `elsart'
-% SP 2006/04/26
-
-\documentclass{elsart}
-
-% Use the option doublespacing or reviewcopy to obtain double line spacing
-% \documentclass[doublespacing]{elsart}
-
-% if you use PostScript figures in your article
-% use the graphics package for simple commands
-% \usepackage{graphics}
-% or use the graphicx package for more complicated commands
-% \usepackage{graphicx}
-% or use the epsfig package if you prefer to use the old commands
-% \usepackage{epsfig}
-
-% The amssymb package provides various useful mathematical symbols
-\usepackage{amssymb}
-
-% The lineno packages adds line numbers. Start line numbering with
-% \begin{linenumbers}, end it with \end{linenumbers}. Or switch it on
-% for the whole article with \linenumbers.
-% \usepackage{lineno}
-
-% \linenumbers
-\begin{document}
-
-\begin{frontmatter}
-
-% Title, authors and addresses
-
-% use the thanksref command within \title, \author or \address for footnotes;
-% use the corauthref command within \author for corresponding author footnotes;
-% use the ead command for the email address,
-% and the form \ead[url] for the home page:
-% \title{Title\thanksref{label1}}
-% \thanks[label1]{}
-% \author{Name\corauthref{cor1}\thanksref{label2}}
-% \ead{email address}
-% \ead[url]{home page}
-% \thanks[label2]{}
-% \corauth[cor1]{}
-% \address{Address\thanksref{label3}}
-% \thanks[label3]{}
-
-\title{}
-
-% use optional labels to link authors explicitly to addresses:
-% \author[label1,label2]{}
-% \address[label1]{}
-% \address[label2]{}
-
-\author{}
-
-\address{}
-
-\begin{abstract}
-% Text of abstract
-\end{abstract}
-
-\begin{keyword}
-% keywords here, in the form: keyword \sep keyword
-
-% PACS codes here, in the form: \PACS code \sep code
-\PACS 
-\end{keyword}
-\end{frontmatter}
-
-% main text
-\section{}
-\label{}
-
-% The Appendices part is started with the command \appendix;
-% appendix sections are then done as normal sections
-% \appendix
-
-% \section{}
-% \label{}
-
-\begin{thebibliography}{00}
-
-% \bibitem{label}
-% Text of bibliographic item
-
-% notes:
-% \bibitem{label} \note
-
-% subbibitems:
-% \begin{subbibitems}{label}
-% \bibitem{label1}
-% \bibitem{label2}
-% If there is a note, it should come last:
-% \bibitem{label3} \note
-% \end{subbibitems}
-
-\bibitem{}
-
-\end{thebibliography}
-
-\end{document}
-