lettrine (4jul23)

git-svn-id: svn://tug.org/texlive/trunk@67546 c570f23f-e606-0410-a88d-b1316a301751

9 files changed, 0 insertions, 287 deletions

diff --git a/Master/texmf-dist/doc/latex/lettrine/contrib/optfile.cfl b/Master/texmf-dist/doc/latex/lettrine/contrib/optfile.cfl
deleted file mode 100644
index 407ed82c99e..00000000000
--- a/Master/texmf-dist/doc/latex/lettrine/contrib/optfile.cfl
+++ /dev/null
@@ -1,28 +0,0 @@
-%% This is an example of config file *for syntax only*.
-%% To use it, copy it to your document's directory and code
-%% \usepackage[optionsfile=optfile.cfl]{lettrine}
-%%
-%% The settings below are just *examples*, they are not meant to be good!
-%% Proper values heavily depend on the font used!
-%%
-%% Letters not listed below, will get either the default parameters,
-%% or those given as optional argument of \lettrine, if any.
-%%
-%% The values of the parameters set in this file can be overridden
-%% locally using the optional argument of \lettrine.
-
-%% A
-\LettrineOptionsFor{A}{slope=0.1\LettrineWidth, findent=-.5em, nindent=.7em}
-%% Same parameters for À (utf-8)
-\LettrineOptionsFor{À}{slope=0.1\LettrineWidth, findent=-.5em, nindent=0.7em}
-%% C'
-\LettrineOptionsFor{C'}{nindent=-0.5em}
-%% I and J hang into the margin
-\LettrineOptionsFor{I}{lhang=1, nindent=0pt}
-\LettrineOptionsFor{J}{lhang=1, nindent=0pt}
-%% Q
-\LettrineOptionsFor{Q}{loversize=0, lraise=0.1}
-%% V
-\LettrineOptionsFor{V}{slope=-0.1\LettrineWidth, lhang=0.5, nindent=0pt}
-
-\endinput
diff --git a/Master/texmf-dist/doc/latex/lettrine/contrib/pacl.cfl b/Master/texmf-dist/doc/latex/lettrine/contrib/pacl.cfl
deleted file mode 100644
index e8de17b6d6e..00000000000
--- a/Master/texmf-dist/doc/latex/lettrine/contrib/pacl.cfl
+++ /dev/null
@@ -1,84 +0,0 @@
-%%% This is file `pacl.cfl'.
-%%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert.
-%%% If you modify this file you *MUST* change its name.
-%%%
-%%% This file contains config values to simplify the use of the
-%%% ACaslon-SwashItalic (aka pacri8s) font from Adobe
-%%% with the lettrine package by Daniel Flipo.
-%%%
-%%% If you want to use this file, your document should contain
-%%% the two next lines, without the leading percent signs.
-%%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pacl}\selectfont}
-%%% \renewcommand{\DefaultOptionsFile}{pacl.cfl}
-%%%
-%%% The fontfamily pacl is defined through the file T1pacl.fd.
-%%% The contents of T1pacl.fd is listed at the end of this file.
-%%%
-%%% The settings below were defined according to my visual tastes.
-%%% No mathematical rule based on the metrices was applied.
-%%% Though the result may not please you, it should be better
-%%% than the default placement. This said, comments are welcome.
-%%%
-%%% Comments about this file can be sent to Pascal.Kockaert
-%%% at the mail server ulb.ac.be.
-
-
-\ProvidesFile{pacl.cfl}[2003/08/24 v0.1 Pascal Kockaert]
-\LettrineOptionsFor{A}{loversize= 0.15,lraise= 0.02,lhang= 0.30,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{B}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent=-0.05\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{C}{loversize=-0.10,lraise= 0.25,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{D}{loversize= 0.15,lraise= 0.00,lhang= 0.20,findent=-0.07\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{E}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent=-0.10\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{F}{loversize=-0.10,lraise= 0.20,lhang= 0.00,findent= 0.05\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{G}{loversize=-0.10,lraise= 0.20,lhang= 0.05,findent=-0.05\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{H}{loversize= 0.05,lraise= 0.00,lhang= 0.25,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{I}{loversize= 0.15,lraise= 0.00,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{J}{loversize=-0.10,lraise= 0.20,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{K}{loversize=-0.10,lraise= 0.25,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.45\LettrineWidth}
-\LettrineOptionsFor{L}{loversize= 0.00,lraise= 0.20,lhang= 0.00,findent=-0.10\LettrineWidth,nindent= 0.40\LettrineWidth}
-\LettrineOptionsFor{M}{loversize= 0.15,lraise= 0.00,lhang= 0.24,findent=-0.05\LettrineWidth,nindent= 0.10\LettrineWidth}
-\LettrineOptionsFor{N}{loversize=-0.05,lraise= 0.25,lhang= 0.13,findent= 0.05\LettrineWidth,nindent= 0.35\LettrineWidth}
-\LettrineOptionsFor{O}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent=-0.12\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{P}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{Q}{loversize=-0.15,lraise= 0.25,lhang= 0.10,findent=-0.05\LettrineWidth,nindent= 0.55\LettrineWidth}
-\LettrineOptionsFor{R}{loversize=-0.15,lraise= 0.25,lhang= 0.20,findent=-0.05\LettrineWidth,nindent= 0.45\LettrineWidth}
-\LettrineOptionsFor{S}{loversize=-0.10,lraise= 0.25,lhang=-0.05,findent=-0.05\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{T}{loversize= 0.15,lraise= 0.00,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{U}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{V}{loversize= 0.15,lraise= 0.00,lhang= 0.20,findent=-0.05\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{W}{loversize= 0.15,lraise= 0.00,lhang= 0.15,findent=-0.05\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{X}{loversize= 0.15,lraise= 0.00,lhang= 0.45,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{Y}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.20\LettrineWidth,nindent= 0.25\LettrineWidth}
-\LettrineOptionsFor{Z}{loversize= 0.05,lraise= 0.15,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
-\endinput
-
-
-% The installation of the pacl family can be performed using the fontinst
-% package.
-% You must own the font ACaslon-SwashItalic, that is an AFM and a PFB file
-% which should be renamed as padri8w.afm and padri8w.pfb.
-%
-% You should process the file Makepacl.tex (see below) through TeX,
-% and follow the instructions of the fontinst manual to finish the install.
-% The file T1pacl.fd should be defined as below and put with other local FD
-% files.
-
-%%% File Makepacl.tex
-\input fontinst.sty
-\installfonts
-   \declareencoding{T1-SWASH}{T1}
-   \fromafm{pacri8s} %%% File containing metrics of ACaslon-SwashItalic
-   \installfont{pacri9s}{pacri8s}{T1}{T1}{pacl}{m}{n}{}
-\endinstallfonts
-\bye
-%%% End of file Makepacl.tex
-
-% The pacl family is defined by the file T1pacl.fd, as follows
-
-%%% File T1pacl.fd
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-\ProvidesFile{t1pacl.fd}[2003/08/24 v1.0 Pascal Kockaert]
-\DeclareFontFamily{T1}{pacl}{}
-\DeclareFontShape{T1}{pacl}{m}{n}{<->pacri9s}{}
-\endinput
-%%% End of file T1pacl.fd
diff --git a/Master/texmf-dist/doc/latex/lettrine/contrib/padl.cfl b/Master/texmf-dist/doc/latex/lettrine/contrib/padl.cfl
deleted file mode 100644
index 784bebc935e..00000000000
--- a/Master/texmf-dist/doc/latex/lettrine/contrib/padl.cfl
+++ /dev/null
@@ -1,85 +0,0 @@
-%%% This is file `padl.cfl'.
-%%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert.
-%%% If you modify this file you *MUST* change its name.
-%%%
-%%% This file contains config values to simplify the use of the
-%%% AGaramondAlt-Italic (aka padri8w) font from Adobe
-%%% with the lettrine package by Daniel Flipo.
-%%%
-%%% If you want to use this file, your document should contain
-%%% the two next lines, without the leading percent signs.
-%%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{padl}\selectfont}
-%%% \renewcommand{\DefaultOptionsFile}{padl.cfl}
-%%%
-%%% The fontfamily padl is defined through the file T1padl.fd.
-%%% The contents of T1padl.fd is listed at the end of this file.
-%%%
-%%% The settings below were defined according to my visual tastes.
-%%% No mathematical rule based on the metrices was applied.
-%%% Though the result may not please you, it should be better
-%%% than the default placement. This said, comments are welcome.
-%%%
-%%% Comments about this file can be sent to Pascal.Kockaert
-%%% at the mail server ulb.ac.be.
-
-
-
-\ProvidesFile{padl.cfl}[2003/08/24 v1.0 Pascal Kockaert]
-
-\LettrineOptionsFor{A}{loversize= 0.05,lraise= 0.10,lhang= 0.40,findent= 0.000\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{B}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.025\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{C}{loversize= 0.00,lraise= 0.10,lhang= 0.15,findent= 0.175\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{D}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent=-0.025\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{E}{loversize= 0.10,lraise= 0.00,lhang= 0.10,findent= 0.100\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{F}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.100\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{G}{loversize=-0.08,lraise= 0.20,lhang= 0.10,findent= 0.000\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{H}{loversize=-0.01,lraise= 0.00,lhang= 0.00,findent= 0.040\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{I}{loversize= 0.10,lraise= 0.00,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{J}{loversize=-0.08,lraise= 0.20,lhang= 0.00,findent=-0.025\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{K}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent=-0.050\LettrineWidth,nindent= 0.60\LettrineWidth}
-\LettrineOptionsFor{L}{loversize= 0.00,lraise= 0.20,lhang= 0.00,findent= 0.100\LettrineWidth,nindent= 0.40\LettrineWidth}
-\LettrineOptionsFor{M}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.10\LettrineWidth}
-\LettrineOptionsFor{N}{loversize= 0.00,lraise= 0.20,lhang= 0.20,findent=-0.010\LettrineWidth,nindent= 0.40\LettrineWidth}
-\LettrineOptionsFor{O}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent=-0.010\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{P}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.050\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{Q}{loversize= 0.00,lraise= 0.20,lhang= 0.20,findent= 0.050\LettrineWidth,nindent= 0.70\LettrineWidth}
-\LettrineOptionsFor{R}{loversize=-0.05,lraise= 0.25,lhang= 0.25,nindent= 0.500\LettrineWidth,nindent= 0.50\LettrineWidth}
-\LettrineOptionsFor{S}{loversize= 0.10,lraise= 0.05,lhang= 0.00,findent= 0.000\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{T}{loversize= 0.10,lraise= 0.00,lhang= 0.35,findent= 0.100\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{U}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.050\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{V}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.050\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{W}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.040\LettrineWidth,nindent= 0.50em}
-\LettrineOptionsFor{X}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.20\LettrineWidth}
-\LettrineOptionsFor{Y}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.100\LettrineWidth,nindent= 0.20\LettrineWidth}
-\LettrineOptionsFor{Z}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.55\LettrineWidth}
-\endinput
-
-
-% The installation of the padl family can be performed using the fontinst package.
-% You must own the font AGaramondAlt-Italic, that is an AFM and a PFB file
-% which should be renamed as padri8w.afm and padri8w.pfb.
-%
-% You should process the file Makepadl.tex (see below) through TeX,
-% and follow the instructions of the fontinst manual to finish the install.
-% The file T1padl.fd should be defined as below and put with other local FD files.
-
-%%% File Makepadl.tex
-\input fontinst.sty
-\installfonts
-   \declareencoding{T1-SWASH}{T1}
-   \fromafm{padri8w} %%% File containing metrics of AGaramondAlt-Italic
-   \gdef\uc#1#2{#1swash}
-   \installfont{padw9w}{padri8w}{T1}{T1}{padl}{m}{n}{}
-\endinstallfonts
-\bye
-%%% End of file Makepadl.tex
-
-% The padl family is defined by the file T1padl.fd, as follows
-
-%%% File T1padl.fd
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-\ProvidesFile{t1padl.fd}[2003/08/24 v0.1 Pascal Kockaert]
-\DeclareFontFamily{T1}{padl}{}
-\DeclareFontShape{T1}{padl}{m}{n}{<->padw9w}{}
-\endinput
-%%% End of file T1padl.fd
diff --git a/Master/texmf-dist/doc/latex/lettrine/contrib/pzc2.cfl b/Master/texmf-dist/doc/latex/lettrine/contrib/pzc2.cfl
deleted file mode 100644
index 77799687805..00000000000
--- a/Master/texmf-dist/doc/latex/lettrine/contrib/pzc2.cfl
+++ /dev/null
@@ -1,45 +0,0 @@
-%%% This is file `pzc2.cfl'.
-%%% It is provided under the LPPL. Copyright is held by Kevin M. Dunn.
-%%% If you modify this file you *MUST* change its name.
-%%%
-%%% This file contains config values to simplify the use of the
-%%% Zapf-Chancery (aka pzc) font with the lettrine package by Daniel Flipo.
-%%% This file provides the parameters for 2 DefaultLines.
-%%%
-%%% If you want to use this file, your document should contain
-%%% the next three lines, without the leading percent signs.
-%%% \setcounter{DefaultLines}{2}
-%%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pzc}\selectfont}
-%%% \renewcommand{\DefaultOptionsFile}{pzc2.cfl}
-%%%
-%%% Comments about this file can be sent to Kevin Dunn
-%%% (cavema2 at cavemanchemistry.com)
-%%%
-\ProvidesFile{pzc2.cfl}[2006/03/19 v0.1 Kevin M. Dunn]
-\LettrineOptionsFor{A}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.25\LettrineWidth}
-\LettrineOptionsFor{B}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.08\LettrineWidth}
-\LettrineOptionsFor{C}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.28\LettrineWidth}
-\LettrineOptionsFor{D}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.05\LettrineWidth}
-\LettrineOptionsFor{E}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.28\LettrineWidth}
-\LettrineOptionsFor{F}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.00\LettrineWidth}
-\LettrineOptionsFor{G}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.17\LettrineWidth}
-\LettrineOptionsFor{H}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.20\LettrineWidth}
-\LettrineOptionsFor{I}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.25\LettrineWidth}
-\LettrineOptionsFor{J}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.00\LettrineWidth}
-\LettrineOptionsFor{K}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.13\LettrineWidth}
-\LettrineOptionsFor{L}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=-0.02\LettrineWidth,nindent= 0.30\LettrineWidth}
-\LettrineOptionsFor{M}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{N}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.10\LettrineWidth}
-\LettrineOptionsFor{O}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.08\LettrineWidth}
-\LettrineOptionsFor{P}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.25\LettrineWidth,nindent= 0.05\LettrineWidth}
-\LettrineOptionsFor{Q}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.10\LettrineWidth}
-\LettrineOptionsFor{R}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.08\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{S}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.13\LettrineWidth}
-\LettrineOptionsFor{T}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.20\LettrineWidth}
-\LettrineOptionsFor{U}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{V}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.18\LettrineWidth,nindent=-0.15\LettrineWidth}
-\LettrineOptionsFor{W}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent=-0.05\LettrineWidth}
-\LettrineOptionsFor{X}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.35\LettrineWidth}
-\LettrineOptionsFor{Y}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.05\LettrineWidth}
-\LettrineOptionsFor{Z}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
-\endinput
diff --git a/Master/texmf-dist/doc/latex/lettrine/contrib/pzc3.cfl b/Master/texmf-dist/doc/latex/lettrine/contrib/pzc3.cfl
deleted file mode 100644
index a67ba9b5b0e..00000000000
--- a/Master/texmf-dist/doc/latex/lettrine/contrib/pzc3.cfl
+++ /dev/null
@@ -1,45 +0,0 @@
-%%% This is file `pzc2.cfl'.
-%%% It is provided under the LPPL. Copyright is held by Kevin M. Dunn.
-%%% If you modify this file you *MUST* change its name.
-%%%
-%%% This file contains config values to simplify the use of the
-%%% Zapf-Chancery (aka pzc) font with the lettrine package by Daniel Flipo.
-%%% This file provides the parameters for 3 DefaultLines.
-%%%
-%%% If you want to use this file, your document should contain
-%%% the next three lines, without the leading percent signs.
-%%% \setcounter{DefaultLines}{3}
-%%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pzc}\selectfont}
-%%% \renewcommand{\DefaultOptionsFile}{pzc3.cfl}
-%%%
-%%% Comments about this file can be sent to Kevin Dunn
-%%% (cavema2 at cavemanchemistry.com)
-
-\ProvidesFile{pzc3.cfl}[2006/03/19 v0.1 Kevin M. Dunn]
-\LettrineOptionsFor{A}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.25\LettrineWidth}
-\LettrineOptionsFor{B}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.08\LettrineWidth,slope=-0.08\LettrineWidth}
-\LettrineOptionsFor{C}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.28\LettrineWidth}
-\LettrineOptionsFor{D}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.05\LettrineWidth,slope=-0.05\LettrineWidth}
-\LettrineOptionsFor{E}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.28\LettrineWidth}
-\LettrineOptionsFor{F}{loversize= 0.35,lraise= 0.05,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.00\LettrineWidth}
-\LettrineOptionsFor{G}{loversize= 0.30,lraise= 0.30,lhang= 0.5,findent=0.10\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{H}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.20\LettrineWidth}
-\LettrineOptionsFor{I}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.25\LettrineWidth}
-\LettrineOptionsFor{J}{loversize= 0.35,lraise= 0.05,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.00\LettrineWidth}
-\LettrineOptionsFor{K}{loversize= 0.30,lraise= 0.20,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.13\LettrineWidth,slope= 0.20\LettrineWidth}
-\LettrineOptionsFor{L}{loversize= 0.35,lraise= 0.00,lhang=0.35,findent=-0.02\LettrineWidth,nindent= 0.30\LettrineWidth}
-\LettrineOptionsFor{M}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{N}{loversize= 0.30,lraise= 0.20,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.10\LettrineWidth,slope= 0.20\LettrineWidth}
-\LettrineOptionsFor{O}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.08\LettrineWidth}
-\LettrineOptionsFor{P}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.25\LettrineWidth,nindent= 0.05\LettrineWidth}
-\LettrineOptionsFor{Q}{loversize= 0.30,lraise= 0.25,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.10\LettrineWidth,slope= 0.20\LettrineWidth}
-\LettrineOptionsFor{R}{loversize= 0.30,lraise= 0.20,lhang= 0.35,findent=0.08\LettrineWidth,nindent= 0.15\LettrineWidth,slope= 0.20\LettrineWidth}
-\LettrineOptionsFor{S}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.13\LettrineWidth}
-\LettrineOptionsFor{T}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.20\LettrineWidth}
-\LettrineOptionsFor{U}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
-\LettrineOptionsFor{V}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.18\LettrineWidth,nindent=-0.05\LettrineWidth,slope=-0.15\LettrineWidth}
-\LettrineOptionsFor{W}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.18\LettrineWidth,nindent=-0.05\LettrineWidth,slope=-0.10\LettrineWidth}
-\LettrineOptionsFor{X}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.35\LettrineWidth}
-\LettrineOptionsFor{Y}{loversize= 0.30,lraise= 0.10,lhang= 0.40,findent=0.10\LettrineWidth,nindent= 0.00\LettrineWidth,slope=-0.10\LettrineWidth}
-\LettrineOptionsFor{Z}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
-\endinput
diff --git a/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-de.pdf b/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-de.pdf
index 5e71166cd7e..4b3ff4d6e17 100644
--- a/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-de.pdf
+++ b/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-de.pdf
diff --git a/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-fr.pdf b/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-fr.pdf
index b12099b93a2..c616adba039 100644
--- a/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-fr.pdf
+++ b/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-fr.pdf
diff --git a/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-lua.pdf b/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-lua.pdf
index 31d231ce83b..cc433b0fabc 100644
--- a/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-lua.pdf
+++ b/Master/texmf-dist/doc/latex/lettrine/lettrine-demo-lua.pdf
diff --git a/Master/texmf-dist/doc/latex/lettrine/lettrine.pdf b/Master/texmf-dist/doc/latex/lettrine/lettrine.pdf
index 0299b73102a..ad1c4ac4c0f 100644
--- a/Master/texmf-dist/doc/latex/lettrine/lettrine.pdf
+++ b/Master/texmf-dist/doc/latex/lettrine/lettrine.pdf