summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/support/latexindent
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2016-10-27 21:22:59 +0000
committerKarl Berry <karl@freefriends.org>2016-10-27 21:22:59 +0000
commit3223dc8b31952693cb552ebf58bf7b25abd0264f (patch)
tree202ed7b9669317654becd627040ed86776eef627 /Master/texmf-dist/doc/support/latexindent
parent5a052b76b791d6fca889eead61e7fef3d5de4f2a (diff)
latexindent (27oct16)
git-svn-id: svn://tug.org/texlive/trunk@42366 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/support/latexindent')
-rw-r--r--Master/texmf-dist/doc/support/latexindent/documentation/latexindent.pdfbin0 -> 280224 bytes
-rw-r--r--Master/texmf-dist/doc/support/latexindent/documentation/latexindent.tex (renamed from Master/texmf-dist/doc/support/latexindent/documentation/manual.tex)869
-rw-r--r--Master/texmf-dist/doc/support/latexindent/documentation/manual.pdfbin237320 -> 0 bytes
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/alignmentoutsideEnvironments.tex24
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/braceTest.tex2
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/bracketTest.tex6
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/environments.tex4
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/filecontents1.tex18
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/filecontents2.tex21
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/ifelsefiSmall.tex10
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/items1.tex10
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/items2.tex21
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/items3.tex22
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/items4.tex22
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/matrix.tex2
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/nestedalignment.tex4
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/nestedalignment1.tex2
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/outputfile.tex2
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/sampleAFTER.tex510
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/sampleBEFORE.tex510
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/stylefile.tex152
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/table4.tex22
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/table5.tex35
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/testHeadings-simple.tex56
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/testItems.tex2
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/testcls.cls78
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/theorem.tex4
-rw-r--r--Master/texmf-dist/doc/support/latexindent/success/verbatim1.tex21
28 files changed, 1483 insertions, 946 deletions
diff --git a/Master/texmf-dist/doc/support/latexindent/documentation/latexindent.pdf b/Master/texmf-dist/doc/support/latexindent/documentation/latexindent.pdf
new file mode 100644
index 00000000000..4ac36f075da
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/documentation/latexindent.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/support/latexindent/documentation/manual.tex b/Master/texmf-dist/doc/support/latexindent/documentation/latexindent.tex
index a34339c06cd..c39b89e627e 100644
--- a/Master/texmf-dist/doc/support/latexindent/documentation/manual.tex
+++ b/Master/texmf-dist/doc/support/latexindent/documentation/latexindent.tex
@@ -1,24 +1,9 @@
% arara: pdflatex
-% !arara: bibtex
-% !arara: pdflatex
-% !arara: pdflatex
+% arara: bibtex
+% arara: pdflatex
+% arara: pdflatex
% !arara: pdflatex
-% !arara: indent: {overwrite: no, trace: yes, localSettings: yes, silent: yes}
-% http://tex.stackexchange.com/questions/122135/how-to-add-a-png-icon-on-the-right-side-of-a-tcolorbox-title
-\begin{filecontents}{mybib.bib}
- @online{cmh:videodemo,
- title="Video demonstration of latexindet.pl on youtube",
- url="http://www.youtube.com/watch?v=s_AMmNVg5WM"}
- @online{cpan,
- title="CPAN: Comprehensive Perl Archive Network",
- url="http://www.cpan.org/"}
- @online{strawberryperl,
- title="Strawberry Perl",
- url="http://strawberryperl.com/"}
- @online{cmhblog,
- title="A Perl script for indenting tex files",
- url="http://tex.blogoverflow.com/2012/08/a-perl-script-for-indenting-tex-files/"}
-\end{filecontents}
+% !arara: indent: {overwrite: yes, trace: yes, localSettings: yes, silent: yes}
\documentclass[11pt]{article}
% This program is free software: you can redistribute it and/or modify
% it under the terms of the GNU General Public License as published by
@@ -45,22 +30,35 @@ top=2cm,bottom=1.5cm]{geometry} % page setup
\usepackage[charter]{mathdesign} % changes font
\usepackage[expansion=false,kerning=true]{microtype} % better kerning
\usepackage{enumitem} % custom lists
-\usepackage{tikz} % so so much
-\usepackage{tcolorbox}
+% setup gitinfo2, as in the manual, details just above begin{document}
+\usepackage[mark,grumpy]{gitinfo2}
+\usepackage{examplep}
% tcolorbox libraries
\tcbuselibrary{breakable,skins,listings}
+% tikz libraries
\usetikzlibrary{positioning}
+\usetikzlibrary{decorations.pathmorphing}
+\usetikzlibrary{decorations,shapes}
\usepackage{varioref} % clever referencing
-\usepackage[colorlinks=true,linkcolor=blue,citecolor=black]{hyperref}
+\usepackage{hyperref}
+\hypersetup{
+ pdfauthor={Chris Hughes},
+ pdftitle={latexindent.pl package},
+ pdfkeywords={perl;beautify;indentation},
+ bookmarksnumbered,
+ bookmarksopen,
+ linktocpage,
+ colorlinks=true,
+ linkcolor=blue,
+ citecolor=black,
+}
\usepackage{cleveref}
-\addbibresource{mybib}
-
-%\newmdenv[linecolor=red,innertopmargin=.5cm,linewidth=3pt,
-% splittopskip=\topskip,skipbelow=0pt,%
-%]{warning}
+\addbibresource{latex-indent}
+\addbibresource{contributors}
+% http://tex.stackexchange.com/questions/122135/how-to-add-a-png-icon-on-the-right-side-of-a-tcolorbox-title
\newtcolorbox{warning}{parbox=false,breakable,enhanced,arc=0mm,colback=red!5,colframe=red,leftrule=12mm,%
overlay={\node[anchor=north west,outer sep=2pt] at (frame.north west) {\includegraphics[width=8mm]{warning}}; }}
@@ -106,7 +104,66 @@ top=2cm,bottom=1.5cm]{geometry} % page setup
linewidth=1.25\textwidth,
columns=fullflexible,
}
-\newcommand{\verbitem}[1]{\small\ttfamily{#1}}
+
+% stars around contributors
+\pgfdeclaredecoration{stars}{initial}{
+ \state{initial}[width=15pt]
+ {
+ \pgfmathparse{round(rnd*100)}
+ \pgfsetfillcolor{yellow!\pgfmathresult!orange}
+ \pgfsetstrokecolor{yellow!\pgfmathresult!red}
+ \pgfnode{star}{center}{}{}{\pgfusepath{stroke,fill}}
+ }
+ \state{final}
+ {
+ \pgfpathmoveto{\pgfpointdecoratedpathlast}
+ }
+}
+
+\newtcolorbox{stars}{%
+ enhanced jigsaw,
+ breakable, % allow page breaks
+ left=0cm,
+ top=0cm,
+ before skip=0.2cm,
+ boxsep=0cm,
+ frame style={draw=none,fill=none}, % hide the default frame
+ colback=white,
+ overlay={
+ \draw[inner sep=0,minimum size=rnd*15pt+2pt]
+ decorate[decoration={stars,segment length=2cm}] {
+ decorate[decoration={zigzag,segment length=2cm,amplitude=0.3cm}] {
+ ([xshift=-.5cm,yshift=0.1cm]frame.south west) -- ([xshift=-.5cm,yshift=0.4cm]frame.north west)
+ }};
+ \draw[inner sep=0,minimum size=rnd*15pt+2pt]
+ decorate[decoration={stars,segment length=2cm}] {
+ decorate[decoration={zigzag,segment length=2cm,amplitude=0.3cm}] {
+ ([xshift=.75cm,yshift=0.1cm]frame.south east) -- ([xshift=.75cm,yshift=0.6cm]frame.north east)
+ }};
+ },
+ % paragraph skips obeyed within tcolorbox
+ parbox=false,
+}
+
+% copied from /usr/local/texlive/2013/texmf-dist/tex/latex/biblatex/bbx/numeric.bbx
+% the only modification is the \stars and \endstars
+\defbibenvironment{specialbib}
+{\stars\list
+ {\printtext[labelnumberwidth]{%
+ \printfield{prefixnumber}%
+ \printfield{labelnumber}}}
+ {\setlength{\labelwidth}{\labelnumberwidth}%
+ \setlength{\leftmargin}{\labelwidth}%
+ \setlength{\labelsep}{\biblabelsep}%
+ \addtolength{\leftmargin}{\labelsep}%
+ \setlength{\itemsep}{\bibitemsep}%
+ \setlength{\parsep}{\bibparsep}}%
+ \renewcommand*{\makelabel}[1]{\hss##1}}
+{\endlist\endstars}
+{\item}
+
+% see: http://tex.stackexchange.com/questions/2245/verbatim-description-list-item
+\newcommand{\verbitem}[1]{\small\PVerb{#1}}
% stolen from arara.sty http://mirrors.med.harvard.edu/ctan/support/arara/doc/arara.sty
%\lstnewenvironment{yaml}[1][]{\lstset{%
% basicstyle=\ttfamily,
@@ -160,16 +217,47 @@ top=2cm,bottom=1.5cm]{geometry} % page setup
\crefname{listing}{Listing}{Listings}
\Crefname{listing}{Listing}{Listings}
+% headers and footers
+\fancyhf{} % delete current header and footer
+\fancyhead[R]{\bfseries\thepage}
+\fancyheadoffset[L]{3cm}
+\pagestyle{fancy}
+
+% renew plain style
+\fancypagestyle{plain}{%
+\fancyhf{} % clear all header and footer fields
+\renewcommand{\headrulewidth}{0pt}
+\renewcommand{\footrulewidth}{0pt}}
+
+% sidebyside environment
+\newenvironment{sidebyside}{\begin{adjustwidth}{-3cm}{1cm}}{\end{adjustwidth}}
+
+% gitinfo2 settings
+\renewcommand{\gitMark}{\gitBranch\,@\,\gitAbbrevHash{}\,\textbullet{}\,\gitAuthorDate }
+
+% setting up gitinfo2:
+% copy the file post-xxx-sample.txt from https://www.ctan.org/tex-archive/macros/latex/contrib/gitinfo2
+% and put it in .git/hooks/post-checkout
+% then
+% cd .git/hooks
+% chmod g+x post-checkout
+% chmod +x post-checkout
+% cp post-checkout post-commit
+% cp post-checkout post-merge
+% cd ../..
+% git checkout master
+% git checkout develop
+% ls .git
+% and you should see gitHeadInfo.gin
\begin{document}
-
% \begin{noindent}
\title{\lstinline[basicstyle=\huge\ttfamily]!latexindent.pl!\\[1cm]
- Version 2.1R}
+ Version 2.2}
% \end{noindent}
-\author{Chris Hughes \footnote{smr01cmh AT users.sourceforge.net}}
+\author{Chris Hughes \footnote{and contributors! (See \vref{sec:contributors}.)}}
\maketitle
\begin{abstract}
- \lstinline!latexindent.pl! is a \lstinline!Perl! script that indents \lstinline!.tex!
+ \lstinline!latexindent.pl! is a \lstinline!Perl! script that indents \lstinline!.tex! (and other)
files according to an indentation scheme that the user can modify to suit their
taste. Environments, including those with alignment delimiters (such as \lstinline!tabular!),
and commands, including those that can split braces and brackets across lines,
@@ -198,6 +286,10 @@ have to make a GUI for \lstinline!latexindent.pl!, but the release of \lstinline
has meant there is no need. Thank you to Paulo for all of your advice and
encouragement.
+There have been several contributors to the project so far (and hopefully more in
+the future!); thank you very much to the people detailed in \vref{sec:contributors}
+for their valued contributions.
+
\subsection{License}
\lstinline!latexindent.pl! is free and open source, and it always will be.
Before you start using it on any important files, bear in mind that \lstinline!latexindent.pl! has the option to overwrite your \lstinline!.tex! files.
@@ -240,8 +332,8 @@ result would be the same, regardless of the leading white space at the beginning
each line which is stripped by \lstinline!latexindent.pl! (unless a \lstinline!verbatim!-like
environment or \lstinline!noIndentBlock! is specified--more on this in \cref{sec:defuseloc}).
-\begin{adjustwidth}{-2cm}{2cm}
- \noindent
+ \begin{sidebyside}
+ \noindent
\begin{minipage}{.6\textwidth}
\begin{cmhlistings}[style=demo]{\lstinline!filecontents! before}{lst:filecontentsbefore}
\begin{filecontents}{mybib.bib}
@@ -254,7 +346,7 @@ url="...
\end{filecontents}
\end{cmhlistings}
\end{minipage}%
- \noindent
+ \noindent
\begin{minipage}{.6\textwidth}
\begin{cmhlistings}[style=demo]{\lstinline!filecontents! after}{lst:filecontentsafter}
\begin{filecontents}{mybib.bib}
@@ -317,99 +409,127 @@ shrink inner sep/.code={
\end{pspicture}}
\end{cmhlistings}
\end{minipage}
-\end{adjustwidth}
+ \end{sidebyside}
\section{How to use the script}
+\lstinline!latexindent.pl! ships as part of the \TeX Live distribution for
+Linux and Mac users; \lstinline!latexindent.exe! ships as part of the \TeX Live
+and MiK\TeX distributions for Windows users. These files are also available
+from github \cite{latexindent-home} should you wish to use them without
+a \TeX{} distribution; in this case, you may like to read \vref{sec:updating-path}
+which details how the \lstinline!path! variable can be updated.
+
+In what follows, we will always refer to \lstinline!latexindent.pl!, but depending on
+your operating system and preference, you might substitute \lstinline!latexindent.exe! or
+simply \lstinline!latexindent!.
+
There are two ways to use \lstinline!latexindent.pl!: from the command line,
-and using \lstinline!arara!. We will discuss how to change the settings and behaviour
-of the script in \cref{sec:defuseloc}.
+and using \lstinline!arara!; we discuss these in \cref{sec:commandline} and
+\cref{sec:arara} respectively. We will discuss how to change the settings and
+behaviour of the script in \vref{sec:defuseloc}.
\lstinline!latexindent.pl! ships with \lstinline!latexindent.exe! for Windows
users, so that you can use the script with or without a Perl distribution.
If you plan to use \lstinline!latexindent.pl! (i.e, the original Perl script) then you will
need a few standard Perl modules--see \vref{sec:requiredmodules} for details.
-In what follows, we will always refer to \lstinline!latexindent.pl!, but depending on
-your operating system and preference, you might substitute \lstinline!latexindent.exe! or
-simply \lstinline!latexindent!.
-
\subsection{From the command line}\label{sec:commandline}
\lstinline!latexindent.pl! has a number of different switches/flags/options, which
-can be combined in any way that you like. \lstinline!latexindent.pl!
-produces a \lstinline!.log! file, \lstinline!indent.log! every time it
+can be combined in any way that you like, either in short or long form as detailed below.
+\lstinline!latexindent.pl! produces a \lstinline!.log! file, \lstinline!indent.log! every time it
is run. There is a base of information that is written to \lstinline!indent.log!,
but other additional information will be written depending
on which of the following options are used.
-\begin{itemize}[labelsep=.5cm]
+\begin{itemize}[labelsep=.25cm]
\item[] \lstinline!latexindent.pl!
- This will output a welcome message to the terminal, including the version number
- and available options.
- \item[\verbitem{-h}] \lstinline!latexindent.pl -h!
+ This will output a welcome message to the terminal, including the version number
+ and available options.
+ \item[\verbitem{-h, --help}] \lstinline!latexindent.pl -h!
- As above this will output a welcome message to the terminal, including the version number
- and available options.
+ As above this will output a welcome message to the terminal, including the version number
+ and available options.
\item[] \lstinline!latexindent.pl myfile.tex!
- This will operate on \lstinline!myfile.tex!, but will simply output to your terminal; \lstinline!myfile.tex! will not be changed in any way using this command.
- \item[\verbitem{-w}] \lstinline!latexindent.pl -w myfile.tex!
-
- This \emph{will} overwrite \lstinline!myfile.tex!, but it will
- make a copy of \lstinline!myfile.tex! first. You can control the name of
- the extension (default is \lstinline!.bak!), and how many different backups are made--
- more on this in \cref{sec:defuseloc}; see \lstinline!backupExtension! and \lstinline!onlyOneBackUp!.
-
- Note that if \lstinline!latexindent.pl! can not create the backup, then it
- will exit without touching your original file; an error message will be given
- asking you to check the permissions of the backup file.
- \item[\verbitem{-o}] \lstinline!latexindent.pl -o myfile.tex outputfile.tex!
-
- This will indent \lstinline!myfile.tex! and output it to \lstinline!outputfile.tex!,
- overwriting it (\lstinline!outputfile.tex!) if it already exists. Note that if \lstinline!latexindent.pl! is called with both
- the \lstinline!-w! and \lstinline!-o! switches, then \lstinline!-w! will
- be ignored and \lstinline!-o! will take priority (this seems safer than the
- other way round).
-
- Note that using \lstinline!-o! is equivalent to using \lstinline!latexindent.pl myfile.tex > outputfile.tex!
- \item[\verbitem{-s}] \lstinline!latexindent.pl -s myfile.tex!
-
- Silent mode: no output will be given to the terminal.
- \item[\verbitem{-t}] \lstinline!latexindent.pl -t myfile.tex!
-
- Tracing mode: verbose output will be given to \lstinline!indent.log!. This
- is useful if \lstinline!latexindent.pl! has made a mistake and you're
- trying to find out where and why. You might also be interested in learning
- about \lstinline!latexindent.pl!'s thought process--if so, this
- switch is for you.
- \item[\verbitem{-l}] \lstinline!latexindent.pl -l myfile.tex!
-
- \label{page:localswitch}
- Local settings: you might like to read \cref{sec:defuseloc} before
- using this switch. \lstinline!latexindent.pl! will always load \lstinline!defaultSettings.yaml!
- and if it is called with the \lstinline!-l! switch and it finds \lstinline!localSettings.yaml!
- in the same directory as \lstinline!myfile.tex! then these settings will be
- added to the indentation scheme. Information will be given in \lstinline!indent.log! on
- the success or failure of loading \lstinline!localSettings.yaml!.
- \item[\verbitem{-d}] \lstinline!latexindent.pl -d myfile.tex!
-
- Only \lstinline!defaultSettings.yaml!: you might like to read \cref{sec:defuseloc} before
- using this switch. By default, \lstinline!latexindent.pl! will always search for
- \lstinline!indentconfig.yaml! or \lstinline!.indentconfig.yaml! in your home directory. If you would prefer it not to do so
- then (instead of deleting or renaming \lstinline!indentconfig.yaml!/\lstinline!.indentconfig.yaml!) you can simply
- call the script with the \lstinline!-d! switch; note that this will also tell
- the script to ignore \lstinline!localSettings.yaml! even if it has been called with the
- \lstinline!-l! switch.
-
- \item[\verbitem{-c}]\lstinline!latexindent.pl -c=/path/to/directory/ myfile.tex!
-
- If you wish to have backup files and \lstinline!indent.log! written to a directory
- other than the current working directory, then you can send these `cruft' files
- to another directory.
- % this switch was made as a result of http://tex.stackexchange.com/questions/142652/output-latexindent-auxiliary-files-to-a-different-directory
+ This will operate on \lstinline!myfile.tex!, but will simply output to your terminal; \lstinline!myfile.tex! will not be changed in any way using this command.
+ \item[\verbitem{-w, --overwrite}] \lstinline!latexindent.pl -w myfile.tex!
+
+ This \emph{will} overwrite \lstinline!myfile.tex!, but it will
+ make a copy of \lstinline!myfile.tex! first. You can control the name of
+ the extension (default is \lstinline!.bak!), and how many different backups are made--
+ more on this in \cref{sec:defuseloc}; see \lstinline!backupExtension! and \lstinline!onlyOneBackUp!.
+
+ Note that if \lstinline!latexindent.pl! can not create the backup, then it
+ will exit without touching your original file; an error message will be given
+ asking you to check the permissions of the backup file.
+ \item[\verbitem{-o,--outputfile}] \lstinline!latexindent.pl -o myfile.tex outputfile.tex!
+
+ This will indent \lstinline!myfile.tex! and output it to \lstinline!outputfile.tex!,
+ overwriting it (\lstinline!outputfile.tex!) if it already exists. Note that if \lstinline!latexindent.pl! is called with both
+ the \lstinline!-w! and \lstinline!-o! switches, then \lstinline!-w! will
+ be ignored and \lstinline!-o! will take priority (this seems safer than the
+ other way round).
+
+ Note that using \lstinline!-o! is equivalent to using \lstinline!latexindent.pl myfile.tex > outputfile.tex!
+ \item[\verbitem{-s, --silent}] \lstinline!latexindent.pl -s myfile.tex!
+
+ Silent mode: no output will be given to the terminal.
+ \item[\verbitem{-t, --trace}] \lstinline!latexindent.pl -t myfile.tex!
+
+ \label{page:traceswitch}
+ Tracing mode: verbose output will be given to \lstinline!indent.log!. This
+ is useful if \lstinline!latexindent.pl! has made a mistake and you're
+ trying to find out where and why. You might also be interested in learning
+ about \lstinline!latexindent.pl!'s thought process--if so, this
+ switch is for you.
+ \item[\verbitem{-tt, --ttrace}] \lstinline!latexindent.pl -tt myfile.tex!
+
+ \emph{More detailed} tracing mode: this option gives more details to \lstinline!indent.log!
+ than the standard \lstinline!trace! option.
+ \item[\verbitem{-l, --local[=myyaml.yaml]}] \lstinline!latexindent.pl -l myfile.tex!
+
+\lstinline!latexindent.pl -l=myyaml.yaml myfile.tex!
+
+\lstinline!latexindent.pl -l myyaml.yaml myfile.tex!
+
+
+ \label{page:localswitch}
+ Local settings: you might like to read \cref{sec:defuseloc} before
+ using this switch. \lstinline!latexindent.pl! will always load \lstinline!defaultSettings.yaml!
+ and if it is called with the \lstinline!-l! switch and it finds \lstinline!localSettings.yaml!
+ in the same directory as \lstinline!myfile.tex! then these settings will be
+ added to the indentation scheme. Information will be given in \lstinline!indent.log! on
+ the success or failure of loading \lstinline!localSettings.yaml!.
+
+The \lstinline!-l! flag can take an \emph{optional} parameter which details the name of a \lstinline!yaml! file
+that resides in the same directory as \lstinline!myfile.tex!; you can use this option if you would
+like to load a settings file in the current working directory that is \emph{not} called \lstinline!localSettings.yaml!.
+
+ \item[\verbitem{-d, --onlydefault}] \lstinline!latexindent.pl -d myfile.tex!
+
+ Only \lstinline!defaultSettings.yaml!: you might like to read \cref{sec:defuseloc} before
+ using this switch. By default, \lstinline!latexindent.pl! will always search for
+ \lstinline!indentconfig.yaml! or \lstinline!.indentconfig.yaml! in your home directory. If you would prefer it not to do so
+ then (instead of deleting or renaming \lstinline!indentconfig.yaml!/\lstinline!.indentconfig.yaml!) you can simply
+ call the script with the \lstinline!-d! switch; note that this will also tell
+ the script to ignore \lstinline!localSettings.yaml! even if it has been called with the
+ \lstinline!-l! switch.
+
+ \item[\verbitem{-c, --cruft=<directory>}]\lstinline!latexindent.pl -c=/path/to/directory/ myfile.tex!
+
+ If you wish to have backup files and \lstinline!indent.log! written to a directory
+ other than the current working directory, then you can send these `cruft' files
+ to another directory.
+ % this switch was made as a result of http://tex.stackexchange.com/questions/142652/output-latexindent-auxiliary-files-to-a-different-directory
\end{itemize}
-\subsection{From \lstinline!arara!}
+\lstinline!latexindent.pl! can also be called on a file without the file extension, for
+example \lstinline[breaklines=true,breakatwhitespace=true,]!latexindent.pl myfile! and in which case, you can specify
+the order in which extensions are searched for; see \vref{lst:fileExtensionPreference}
+for full details.
+
+\subsection{From \lstinline!arara!}\label{sec:arara}
Using \lstinline!latexindent.pl! from the command line is fine for some folks, but
others may find it easier to use from \lstinline!arara!. \lstinline!latexindent.pl!
ships with an \lstinline!arara! rule, \lstinline!indent.yaml!, which can be copied
@@ -476,100 +596,102 @@ but here is a description of what each switch is designed to do. The default
value is given in each case.
You can certainly feel free to edit \lstinline!defaultSettings.yaml!, but
-this is not ideal as it may be overwritten when you update your distribution--
+this is not ideal as it may be overwritten when you update your \TeX{} distribution --
all of your hard work tweaking the script would be undone! Don't worry,
-there's a solution--feel free to peek ahead to \cref{sec:indentconfig} if you like.
+there's a solution, feel free to peek ahead to \cref{sec:indentconfig} if you like.
\begin{itemize}
\item[\verbitem{defaultIndent}] \lstinline!"\t"!
- This is the default indentation (\lstinline!\t! means a tab) used in the absence of other details
- for the command or environment we are working with--see \lstinline!indentRules!
- for more details (\cpageref{page:indentRules}).
+ This is the default indentation (\lstinline!\t! means a tab) used in the absence of other details
+ for the command or environment we are working with--see \lstinline!indentRules!
+ for more details (\cpageref{page:indentRules}).
- If you're interested in experimenting with \lstinline!latexindent.pl! then you
- can \emph{remove} all indentation by setting \lstinline!defaultIndent: ""!
+ If you're interested in experimenting with \lstinline!latexindent.pl! then you
+ can \emph{remove} all indentation by setting \lstinline!defaultIndent: ""!
\item[\verbitem{backupExtension}] \lstinline!.bak!
- If you call \lstinline!latexindent.pl! with the \lstinline!-w! switch (to overwrite
- \lstinline!myfile.tex!) then it will create a backup file before doing
- any indentation: \lstinline!myfile.bak0!
+ If you call \lstinline!latexindent.pl! with the \lstinline!-w! switch (to overwrite
+ \lstinline!myfile.tex!) then it will create a backup file before doing
+ any indentation: \lstinline!myfile.bak0!
- By default, every time you call \lstinline!latexindent.pl! after this with
- the \lstinline!-w! switch it will create \lstinline!myfile.bak1!, \lstinline!myfile.bak2!,
- etc.
+ By default, every time you call \lstinline!latexindent.pl! after this with
+ the \lstinline!-w! switch it will create \lstinline!myfile.bak1!, \lstinline!myfile.bak2!,
+ etc.
\item[\verbitem{onlyOneBackUp}] \lstinline!0!
- \label{page:onlyonebackup}
- If you don't want a backup for every time that you call \lstinline!latexindent.pl! (so
- you don't want \lstinline!myfile.bak1!, \lstinline!myfile.bak2!, etc) and you simply
- want \lstinline!myfile.bak! (or whatever you chose \lstinline!backupExtension! to be)
- then change \lstinline!onlyOneBackUp! to \lstinline!1!.
+ \label{page:onlyonebackup}
+ If you don't want a backup for every time that you call \lstinline!latexindent.pl! (so
+ you don't want \lstinline!myfile.bak1!, \lstinline!myfile.bak2!, etc) and you simply
+ want \lstinline!myfile.bak! (or whatever you chose \lstinline!backupExtension! to be)
+ then change \lstinline!onlyOneBackUp! to \lstinline!1!.
\item[\verbitem{maxNumberOfBackUps}]\lstinline!0!
- Some users may only want a finite number of backup files,
- say at most $3$, in which case, they can change this switch.
- The smallest value of \lstinline!maxNumberOfBackUps! is $0$ which will \emph{not}
- prevent backup files being made--in this case, the behaviour will be dictated
- entirely by \lstinline!onlyOneBackUp!.
- %\footnote{This was a feature request made on \href{https://github.com/cmhughes/latexindent.plx}{github}}
+ Some users may only want a finite number of backup files,
+ say at most $3$, in which case, they can change this switch.
+ The smallest value of \lstinline!maxNumberOfBackUps! is $0$ which will \emph{not}
+ prevent backup files being made--in this case, the behaviour will be dictated
+ entirely by \lstinline!onlyOneBackUp!.
+ %\footnote{This was a feature request made on \href{https://github.com/cmhughes/latexindent.plx}{github}}
\item[\verbitem{cycleThroughBackUps}]\lstinline!0!
- Some users may wish to cycle through backup files, by deleting the
- oldest backup file and keeping only the most recent; for example,
- with \lstinline!maxNumberOfBackUps: 4!, and \lstinline!cycleThroughBackUps!
- set to \lstinline!1! then the \lstinline!copy! procedure given in \cref{lst:cycleThroughBackUps}
- would be obeyed.
+ Some users may wish to cycle through backup files, by deleting the
+ oldest backup file and keeping only the most recent; for example,
+ with \lstinline!maxNumberOfBackUps: 4!, and \lstinline!cycleThroughBackUps!
+ set to \lstinline!1! then the \lstinline!copy! procedure given in \cref{lst:cycleThroughBackUps}
+ would be obeyed.
- \begin{cmhlistings}[language=Perl]{\lstinline!cycleThroughBackUps!}{lst:cycleThroughBackUps}
+ \begin{cmhlistings}[language=Perl]{\lstinline!cycleThroughBackUps!}{lst:cycleThroughBackUps}
copy myfile.bak1 to myfile.bak0
copy myfile.bak2 to myfile.bak1
copy myfile.bak3 to myfile.bak2
copy myfile.bak4 to myfile.bak3
- \end{cmhlistings}
+ \end{cmhlistings}
\item[\verbitem{indentPreamble}] \lstinline!0!
- The preamble of a document can sometimes contain some trickier code
- for \lstinline!latexindent.pl! to work with. By default, \lstinline!latexindent.pl!
- won't try to operate on the preamble, but if you'd like it to try then
- change \lstinline!indentPreamble! to \lstinline!1!.
+ The preamble of a document can sometimes contain some trickier code
+ for \lstinline!latexindent.pl! to work with. By default, \lstinline!latexindent.pl!
+ won't try to operate on the preamble, but if you'd like it to try then
+ change \lstinline!indentPreamble! to \lstinline!1!.
\item[\verbitem{alwaysLookforSplitBraces}] \lstinline!1!
- This switch tells \lstinline!latexindent.pl! to look for commands that
- can split \emph{braces} across lines, such as \lstinline!parbox!, \lstinline!tikzset!, etc. In older
- versions of \lstinline!latexindent.pl! you had to specify each one in \lstinline!checkunmatched!--this
- clearly became tedious, hence the introduction of \lstinline!alwaysLookforSplitBraces!.
+ This switch tells \lstinline!latexindent.pl! to look for commands that
+ can split \emph{braces} across lines, such as \lstinline!parbox!, \lstinline!tikzset!, etc. In older
+ versions of \lstinline!latexindent.pl! you had to specify each one in \lstinline!checkunmatched!--this
+ clearly became tedious, hence the introduction of \lstinline!alwaysLookforSplitBraces!.
- \emph{As long as you leave this switch on (set to 1) you don't need to specify which
- commands can split braces across lines--you can ignore the
- fields \lstinline!checkunmatched! and \lstinline!checkunmatchedELSE! described
- later on \cpageref{lst:checkunmatched}}.
+ \emph{As long as you leave this switch on (set to 1) you don't need to specify which
+ commands can split braces across lines--you can ignore the
+ fields \lstinline!checkunmatched! and \lstinline!checkunmatchedELSE! described
+ later on \cpageref{lst:checkunmatched}}.
\item[\verbitem{alwaysLookforSplitBrackets}] \lstinline!1!
- This switch tells \lstinline!latexindent.pl! to look for commands that
- can split \emph{brackets} across lines, such as \lstinline!psSolid!, \lstinline!pgfplotstabletypeset!,
- etc. In older versions of \lstinline!latexindent.pl! you had to specify each one in \lstinline!checkunmatchedbracket!--
- this clearly became tedious, hence the introduction of \lstinline!alwaysLookforSplitBraces!.
+ This switch tells \lstinline!latexindent.pl! to look for commands that
+ can split \emph{brackets} across lines, such as \lstinline!psSolid!, \lstinline!pgfplotstabletypeset!,
+ etc. In older versions of \lstinline!latexindent.pl! you had to specify each one in \lstinline!checkunmatchedbracket!--
+ this clearly became tedious, hence the introduction of \lstinline!alwaysLookforSplitBraces!.
- \emph{As long as you leave this switch on (set to 1) you don't need to specify which
- commands can split brackets across lines--you can ignore \lstinline!checkunmatchedbracket! described later on
- \cpageref{lst:checkunmatched}}.
+ \emph{As long as you leave this switch on (set to 1) you don't need to specify which
+ commands can split brackets across lines--you can ignore \lstinline!checkunmatchedbracket! described later on
+ \cpageref{lst:checkunmatched}}.
\item[\verbitem{removeTrailingWhitespace}] \lstinline!0!
- By default \lstinline!latexindent.pl! indents every line (including empty lines)
- which creates `trailing whitespace' feared by most version control systems. If
- this option is set to \lstinline!1!, trailing whitespace is removed from all
- lines, also non-empty ones. In general this should not create any problems, but
- by precaution this option is turned off by default. Thanks to \href{https://github.com/vosskuhle}{vosskuhle} for
- providing this feature.
+ By default \lstinline!latexindent.pl! indents every line (including empty lines)
+ which creates `trailing white space' feared by most version control systems. If
+ this option is set to \lstinline!1!, trailing white space is removed from all
+ lines, also non-empty ones. In general this should not create any problems, but
+ by precaution this option is turned off by default. Thanks to \cite{vosskuhle} for
+ providing this feature.
\item[\verbitem{lookForAlignDelims}] This is the first example of a field
- in \lstinline!defaultSettings.yaml! that has more than one line; \cref{lst:aligndelims}
- shows more details.
+ in \lstinline!defaultSettings.yaml! that has more than one line; \cref{lst:aligndelims:basic}
+ shows more details. In fact, the fields in \verbitem{lookForAlignDelims} can actually
+ take two different forms: the \emph{basic} version is shown in \cref{lst:aligndelims:basic}
+ and the \emph{advanced} version in \cref{lst:aligndelims:advanced}; we will discuss each in turn.
- \begin{cmhlistings}[style=yaml]{\lstinline!lookForAlignDelims!}{lst:aligndelims}
+ \begin{cmhlistings}[style=yaml]{\lstinline!lookForAlignDelims! (basic)}{lst:aligndelims:basic}
lookForAlignDelims:
tabular: 1
tabularx: 1
@@ -591,18 +713,18 @@ lookForAlignDelims:
The environments specified in this field will be operated on in a special way by \lstinline!latexindent.pl!. In particular, it will try and align each column by its alignment
tabs. It does have some limitations (discussed further in \cref{sec:knownlimitations}),
- but in many cases it will produce results such as those in \cref{lst:tabularbefore,lst:tabularafter}.
+ but in many cases it will produce results such as those in \cref{lst:tabularbefore:basic,lst:tabularafter:basic}.
\begin{minipage}{.5\textwidth}
- \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! before}{lst:tabularbefore}
+ \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! before}{lst:tabularbefore:basic}
\begin{tabular}{cccc}
1& 2 &3 &4\\
5& &6 &\\
\end{tabular}
\end{cmhlistings}
- \end{minipage}
+ \end{minipage}%
\begin{minipage}{.5\textwidth}
- \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! after}{lst:tabularafter}
+ \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! after (basic)}{lst:tabularafter:basic}
\begin{tabular}{cccc}
1 & 2 & 3 & 4 \\
5 & & 6 & \\
@@ -614,13 +736,81 @@ lookForAlignDelims:
environments then you can either remove them from \lstinline!lookForAlignDelims! altogether, or set the relevant key to \lstinline!0!, for example \lstinline!tabular: 0!, or if you just want to ignore \emph{specific}
instances of the environment, you could wrap them in something from \lstinline!noIndentBlock! (see \cref{lst:noIndentBlock}).
- \item If you have blocks of code that you wish to align at the \& character that
- are \emph{not} wrapped in, for example, \lstinline!\begin{tabular}...\end{tabular}!, then you use the mark up
- illustrated in \cref{lst:alignmentmarkup}. Note that the \lstinline!%*! must be next to
- each other, but that there can be any number of spaces (possibly none) between the
- \lstinline!*! and \lstinline!\begin{tabular}!; note also that you may use any
- environment name that you have specified in \lstinline!lookForAlignDelims!.
- \begin{cmhlistings}[style=demo,columns=fixed]{Mark up for aligning delimiters outside of environments}{lst:alignmentmarkup}
+ If you wish to remove the alignment of the \lstinline!\\! within a delimiter-aligned block, then the
+ advanced form of \lstinline!lookForAlignDelims! shown in \cref{lst:aligndelims:advanced} is for you.
+ \begin{cmhlistings}[style=yaml]{\lstinline!lookForAlignDelims! (advanced)}{lst:aligndelims:advanced}
+lookForAlignDelims:
+ tabular:
+ delims: 1
+ alignDoubleBackSlash: 0
+ spacesBeforeDoubleBackSlash: 0
+ tabularx:
+ delims: 1
+ longtable: 1
+ \end{cmhlistings}
+
+ Note that you can use a mixture of the basic and advanced form: in \cref{lst:aligndelims:advanced} \lstinline!tabular! and \lstinline!tabularx!
+ are advanced and \lstinline!longtable! is basic. When using the advanced form, each field should receive at least 1 sub-field, and \emph{can} (but does not have to) receive up to 3 fields:
+ \begin{itemize}
+ \item \lstinline!delims!: switch equivalent to simply specifying, for example, \lstinline!tabular: 1! in
+ the basic version shown in \cref{lst:aligndelims:basic} (default: 1);
+ \item \lstinline!alignDoubleBackSlash!: switch to determine if \lstinline!\\! should be aligned (default: 1);
+ \item \lstinline!spacesBeforeDoubleBackSlash!: optionally, specifies the number of spaces to be inserted
+ before (non-aligned) \lstinline!\\!. In order to use this field, \lstinline!alignDoubleBackSlash! needs
+ to be set to 0 (default: 0).
+ \end{itemize}
+
+ With the settings shown in \cref{lst:aligndelims:advanced} we receive the before-and-after results shown in
+ \cref{lst:tabularbefore:advanced,lst:tabularafter:advanced}; note that the ampersands have been aligned, but
+ the \lstinline!\\! have not (compare the alignment of \lstinline!\\! in \cref{lst:tabularafter:basic,lst:tabularafter:advanced}).
+
+ \begin{minipage}{.5\textwidth}
+ \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! before }{lst:tabularbefore:advanced}
+\begin{tabular}{cccc}
+1& 2 &3 &4\\
+5& &6 &\\
+\end{tabular}
+ \end{cmhlistings}
+ \end{minipage}%
+ \begin{minipage}{.5\textwidth}
+ \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! after (advanced)}{lst:tabularafter:advanced}
+\begin{tabular}{cccc}
+ 1 & 2 & 3 & 4\\
+ 5 & & 6 &\\
+\end{tabular}
+ \end{cmhlistings}
+ \end{minipage}
+
+ Using \lstinline!spacesBeforeDoubleBackSlash: 3! gives \cref{lst:tabularbefore:spacing,lst:tabularafter:spacing},
+ note the spacing before the \lstinline!\\! in \cref{lst:tabularafter:spacing}.
+
+ \begin{minipage}{.5\textwidth}
+ \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! before}{lst:tabularbefore:spacing}
+\begin{tabular}{cccc}
+1& 2 &3 &4\\
+5& &6 &\\
+\end{tabular}
+ \end{cmhlistings}
+ \end{minipage}%
+ \begin{minipage}{.5\textwidth}
+ \begin{cmhlistings}[style=demo,columns=fixed]{\lstinline!tabular! after (spacing)}{lst:tabularafter:spacing}
+\begin{tabular}{cccc}
+ 1 & 2 & 3 & 4 \\
+ 5 & & 6 & \\
+\end{tabular}
+ \end{cmhlistings}
+ \end{minipage}
+
+
+
+
+ If you have blocks of code that you wish to align at the \& character that
+ are \emph{not} wrapped in, for example, \lstinline!\begin{tabular}...\end{tabular}!, then you use the mark up
+ illustrated in \cref{lst:alignmentmarkup}. Note that the \lstinline!%*! must be next to
+ each other, but that there can be any number of spaces (possibly none) between the
+ \lstinline!*! and \lstinline!\begin{tabular}!; note also that you may use any
+ environment name that you have specified in \lstinline!lookForAlignDelims!.
+ \begin{cmhlistings}[style=demo,columns=fixed]{Mark up for aligning delimiters outside of environments}{lst:alignmentmarkup}
\matrix{%
%* \begin{tabular}
1 & 2 & 3 & 4 \\
@@ -630,11 +820,11 @@ lookForAlignDelims:
\end{cmhlistings}
\item[\verbitem{verbatimEnvironments}] A field that contains a list of environments
- that you would like left completely alone--no indentation will be done
- to environments that you have specified in this field--see \cref{lst:verbatimEnvironments}.
+ that you would like left completely alone--no indentation will be done
+ to environments that you have specified in this field--see \cref{lst:verbatimEnvironments}.
- \begin{cmhlistings}[style=yaml]{\lstinline!verbatimEnvironments!}{lst:verbatimEnvironments}
+ \begin{cmhlistings}[style=yaml]{\lstinline!verbatimEnvironments!}{lst:verbatimEnvironments}
verbatimEnvironments:
verbatim: 1
lstlisting: 1
@@ -644,12 +834,12 @@ verbatimEnvironments:
then \lstinline!latexindent.pl! will \emph{always} prioritize \lstinline!verbatimEnvironments!.
\item[\verbitem{noIndentBlock}] If you have a block of code that you don't
- want \lstinline!latexindent.pl! to touch (even if it is \emph{not} a verbatim-like
- environment) then you can wrap it in an environment from \lstinline!noIndentBlock!;
- you can use any name you like for this, provided you populate it as demonstrate in
- \cref{lst:noIndentBlock}.
+ want \lstinline!latexindent.pl! to touch (even if it is \emph{not} a verbatim-like
+ environment) then you can wrap it in an environment from \lstinline!noIndentBlock!;
+ you can use any name you like for this, provided you populate it as demonstrate in
+ \cref{lst:noIndentBlock}.
- \begin{cmhlistings}[style=yaml]{\lstinline!noIndentBlock!}{lst:noIndentBlock}
+ \begin{cmhlistings}[style=yaml]{\lstinline!noIndentBlock!}{lst:noIndentBlock}
noIndentBlock:
noindent: 1
cmhtest: 1
@@ -670,12 +860,12 @@ noIndentBlock:
\end{cmhlistings}
\item[\verbitem{noAdditionalIndent}] If you would prefer some of your
- environments or commands not to receive any additional indent, then
- populate \lstinline!noAdditionalIndent!; see \cref{lst:noAdditionalIndent}.
- Note that these environments will still receive the \emph{current} level
- of indentation unless they belong to \lstinline!verbatimEnvironments!, or \lstinline!noIndentBlock!.
+ environments or commands not to receive any additional indent, then
+ populate \lstinline!noAdditionalIndent!; see \cref{lst:noAdditionalIndent}.
+ Note that these environments will still receive the \emph{current} level
+ of indentation unless they belong to \lstinline!verbatimEnvironments!, or \lstinline!noIndentBlock!.
- \begin{cmhlistings}[style=yaml]{\lstinline!noAdditionalIndent!}{lst:noAdditionalIndent}
+ \begin{cmhlistings}[style=yaml]{\lstinline!noAdditionalIndent!}{lst:noAdditionalIndent}
noAdditionalIndent:
document: 1
myexample: 1
@@ -695,10 +885,10 @@ noAdditionalIndent:
you have to specify \emph{both} as \lstinline!1! (the default is \lstinline!0!).
If you do not specify both as the same value you may get some interesting results!
\item[\verbitem{indentRules}] If\label{page:indentRules} you would prefer to specify
- individual rules for certain environments or commands, just
- populate \lstinline!indentRules!; see \cref{lst:indentRules}
+ individual rules for certain environments or commands, just
+ populate \lstinline!indentRules!; see \cref{lst:indentRules}
- \begin{cmhlistings}[style=yaml]{\lstinline!indentRules!}{lst:indentRules}
+ \begin{cmhlistings}[style=yaml]{\lstinline!indentRules!}{lst:indentRules}
indentRules:
myenvironment: "\t\t"
anotherenvironment: "\t\t\t\t"
@@ -715,11 +905,12 @@ indentRules:
is given in \cref{sec:fieldhierachy}.
\item[\verbitem{indentAfterHeadings}] This field enables the user to specify
- indentation rules that take effect after heading commands such as \lstinline!\part!, \lstinline!\chapter!,
- \lstinline!\section!, \lstinline!\subsection*! etc. This field is slightly different from all
- of the fields that we have considered previously, because each element is
- itself a field which has two elements: \lstinline!indent! and \lstinline!level!.
- \begin{cmhlistings}[style=yaml]{\lstinline!indentAfterHeadings!}{lst:indentAfterHeadings}
+ indentation rules that take effect after heading commands such as \lstinline!\part!, \lstinline!\chapter!,
+ \lstinline!\section!, \lstinline!\subsection*! etc. This field is slightly different from most
+ of the fields that we have considered previously, because each element is
+ itself a field which has two elements: \lstinline!indent! and \lstinline!level!. (Similar
+ in structure to the advanced form of \lstinline!lookForAlignDelims! in \cref{lst:aligndelims:advanced}.)
+ \begin{cmhlistings}[style=yaml]{\lstinline!indentAfterHeadings!}{lst:indentAfterHeadings}
indentAfterHeadings:
part:
indent: 0
@@ -744,15 +935,15 @@ indentAfterHeadings:
tells \lstinline!latexindent.pl! simply to use a space character after \lstinline!\chapter! headings
(once \lstinline!indent! is set to \lstinline!1! for \lstinline!chapter!).
- \item[\verbitem{indentAfterItems}] The environments specified in \lstinline!indentAfterItems! tell
-\lstinline!latexindent.pl! to look for \lstinline!\item! commands; if these switches are set to \lstinline!1!
-then indentation will be performed so as indent the code after each \lstinline!item!.
- \begin{cmhlistings}{\lstinline!indentAfterItems!}{lst:indentafteritems}
+ \item[\verbitem{indentAfterItems}] The environments specified in \lstinline!indentAfterItems! tell
+ \lstinline!latexindent.pl! to look for \lstinline!\item! commands; if these switches are set to \lstinline!1!
+ then indentation will be performed so as indent the code after each \lstinline!item!.
+ \begin{cmhlistings}{\lstinline!indentAfterItems!}{lst:indentafteritems}
indentAfterItems:
itemize: 1
enumerate: 1
- \end{cmhlistings}
-A demonstration is given in \cref{lst:itemsbefore,lst:itemsafter}
+ \end{cmhlistings}
+ A demonstration is given in \cref{lst:itemsbefore,lst:itemsafter}
\begin{minipage}{.5\textwidth}
\begin{cmhlistings}[style=demo,xleftmargin=-3mm,columns=fixed]{\lstinline!items! before}{lst:itemsbefore}
@@ -763,7 +954,7 @@ some more text here
\item another item
\end{itemize}
\end{cmhlistings}
- \end{minipage}
+ \end{minipage}%
\begin{minipage}{.5\textwidth}
\begin{cmhlistings}[style=demo,xleftmargin=-3mm,columns=fixed]{\lstinline!items! after}{lst:itemsafter}
\begin{itemize}
@@ -775,38 +966,91 @@ some more text here
\end{cmhlistings}
\end{minipage}
- \item[\verbitem{itemNames}] If you have your own \lstinline!item! commands (perhaps you
- prefer to use \lstinline!myitem!, for example)
- then you can put populate them in \lstinline!itemNames!.
- For example, users of the \lstinline!exam! document class might like to add
-\lstinline!parts! to \lstinline!indentAfterItems! and \lstinline!part! to \lstinline!itemNames!
-to their user settings--see \vref{sec:indentconfig} for details of how to configure user settings,
-and \vref{lst:mysettings} in particular.\label{page:examsettings}
-
-\item[\verbitem{constructIfElseFi}] The commands specified in this field
- will tell \lstinline!latexindent.pl! to look for constructs that
- have the form \lstinline!\if...! \lstinline!\else...! \lstinline!\fi!, such as,
- for example, \lstinline!\ifnum!; see \cref{lst:iffibefore,lst:iffiafter} for
- a before-and-after demonstration.
-
- \begin{minipage}{.5\textwidth}
- \begin{cmhlistings}[style=demo,xleftmargin=-3mm,columns=fixed]{\lstinline!if-else-fi! construct before}{lst:iffibefore}
+ \item[\verbitem{itemNames}] If you have your own \lstinline!item! commands (perhaps you
+ prefer to use \lstinline!myitem!, for example)
+ then you can put populate them in \lstinline!itemNames!.
+ For example, users of the \lstinline!exam! document class might like to add
+ \lstinline!parts! to \lstinline!indentAfterItems! and \lstinline!part! to \lstinline!itemNames!
+ to their user settings--see \vref{sec:indentconfig} for details of how to configure user settings,
+ and \vref{lst:mysettings} in particular.\label{page:examsettings}
+
+ \item[\verbitem{constructIfElseFi}] The commands specified in this field
+ will tell \lstinline!latexindent.pl! to look for constructs that
+ have the form \lstinline!\if...! \lstinline!\else...! \lstinline!\fi!, such as,
+ for example, \lstinline!\ifnum!; see \cref{lst:iffibefore,lst:iffiafter} for
+ a before-and-after demonstration.
+
+ \begin{minipage}{.5\textwidth}
+ \begin{cmhlistings}[style=demo,xleftmargin=-3mm,columns=fixed]{\lstinline!if-else-fi! construct before}{lst:iffibefore}
\ifnum\radius>5
\ifnum\radius<16
\draw[decorate,...
\fi
\fi
-\end{cmhlistings}
- \end{minipage}
- \begin{minipage}{.5\textwidth}
- \begin{cmhlistings}[style=demo,xleftmargin=-3mm,columns=fixed]{\lstinline!if-else-fi! construct after}{lst:iffiafter}
+ \end{cmhlistings}
+ \end{minipage}%
+ \begin{minipage}{.5\textwidth}
+ \begin{cmhlistings}[style=demo,xleftmargin=-3mm,columns=fixed]{\lstinline!if-else-fi! construct after}{lst:iffiafter}
\ifnum\radius>5
\ifnum\radius<16
\draw[decorate,...
\fi
\fi
-\end{cmhlistings}
- \end{minipage}
+ \end{cmhlistings}
+ \end{minipage}
+
+ \item[\verbitem{fileExtensionPreference}] \lstinline!latexindent.pl! can be called to
+ act on a file without
+ specifying the file extension. For example we can call \lstinline!latexindent.pl myfile!
+ in which case the script will look for \lstinline!myfile! with the extensions
+ specified in \lstinline!fileExtensionPreference! in their numeric order. If
+ no match is found, the script will exit. As with all of the fields, you should
+ change and/or add to this as necessary.
+ \begin{cmhlistings}[style=yaml]{\lstinline!fileExtensionPreference!}{lst:fileExtensionPreference}
+fileExtensionPreference:
+ .tex: 1
+ .sty: 2
+ .cls: 3
+ .bib: 4
+ \end{cmhlistings}
+ Calling \lstinline!latexindent.pl myfile! with the details specified in \cref{lst:fileExtensionPreference}
+ means that the script will first look for \lstinline!myfile.tex!, then \lstinline!myfile.sty!, \lstinline!myfile.cls!,
+ and finally \lstinline!myfile.bib! in order.
+\item[\verbitem{logFilePreferences}]
+ \lstinline!latexindent.pl! writes information to \lstinline!indent.log!, some
+ of which can be customised by changing \lstinline!logFilePreferences!; see \cref{lst:logFilePreferences}.
+\begin{cmhlistings}[style=yaml]{\lstinline!logFilePreferences!}{lst:logFilePreferences}
+logFilePreferences:
+ showEveryYamlRead: 1
+ showAlmagamatedSettings: 0
+ endLogFileWith: '--------------'
+ traceModeIncreaseIndent: '>>'
+ traceModeAddCurrentIndent: '||'
+ traceModeDecreaseIndent: '<<'
+ traceModeBetweenLines: "\n"
+ \end{cmhlistings}
+If you load your own user settings (see \vref{sec:indentconfig}) then \lstinline!latexindent.pl! will
+detail them in \lstinline!indent.log!; you can choose not to have the details logged by switching
+\lstinline!showEveryYamlRead! to \lstinline!0!. Once all of your settings have
+been loaded, you can see the amalgamated settings by switching \lstinline!showAlmagamatedSettings!
+to \lstinline!1!, if you wish. The log file will end with the characters
+given in \lstinline!endLogFileWith!.
+
+When \lstinline!trace! mode is active (see \cpageref{page:traceswitch}) verbose information is written
+to \lstinline!indent.log!. The decoration of this information can be customised through the remaining
+fields given in \cref{lst:logFilePreferences}; note, in particular, the use of \lstinline!"\n"! for
+escaped characters (using single quotes will not produce the same results).
+
+\item[\verbitem{fileContentsEnvironments}]
+ \lstinline!latexindent.pl! determines when the main document begins by looking for \lstinline!\begin{document}!;
+ it will not do so when inside any of the environments specified in \lstinline!fileContentsEnvironments!, see
+ \cref{lst:fileContentsEnvironments}.
+\begin{cmhlistings}[style=yaml]{\lstinline!fileContentsEnvironments!}{lst:fileContentsEnvironments}
+fileContentsEnvironments:
+ filecontents: 1
+ filecontents*: 1
+ \end{cmhlistings}
+
\begin{warning}
\emph{The following fields are marked in red, as they are not necessary
unless you wish to micro-manage your indentation scheme.
@@ -816,38 +1060,38 @@ and \vref{lst:mysettings} in particular.\label{page:examsettings}
% to anyone reading the source code- I know the next line isn't the
% correct way to do it :)
\item[\color{red}\verbitem{checkunmatched}] Assuming you keep \lstinline!alwaysLookforSplitBraces! set to \lstinline!1! (which
- is the default) then you don't need to worry about \lstinline!checkunmatched!.
+ is the default) then you don't need to worry about \lstinline!checkunmatched!.
- Should you wish to deactivate \lstinline!alwaysLookforSplitBraces! by setting it to \lstinline!0!, then
- you can populate \lstinline!checkunmatched! with commands that can split braces across
- lines--see \cref{lst:checkunmatched}.
+ Should you wish to deactivate \lstinline!alwaysLookforSplitBraces! by setting it to \lstinline!0!, then
+ you can populate \lstinline!checkunmatched! with commands that can split braces across
+ lines--see \cref{lst:checkunmatched}.
- \begin{cmhlistings}[style=yaml]{\lstinline!checkunmatched!}{lst:checkunmatched}
+ \begin{cmhlistings}[style=yaml]{\lstinline!checkunmatched!}{lst:checkunmatched}
checkunmatched:
parbox: 1
vbox: 1
\end{cmhlistings}
\item[\color{red}\verbitem{checkunmatchedELSE}] Similarly, assuming you keep \lstinline!alwaysLookforSplitBraces! set to \lstinline!1! (which
- is the default) then you don't need to worry about \lstinline!checkunmatchedELSE!.
+ is the default) then you don't need to worry about \lstinline!checkunmatchedELSE!.
- As in \lstinline!checkunmatched!, should you wish to deactivate \lstinline!alwaysLookforSplitBraces! by setting it to \lstinline!0!, then
- you can populate \lstinline!checkunmatchedELSE! with commands that can split braces across
- lines \emph{and} have an `else' statement--see \cref{lst:checkunmatchedELSE}.
+ As in \lstinline!checkunmatched!, should you wish to deactivate \lstinline!alwaysLookforSplitBraces! by setting it to \lstinline!0!, then
+ you can populate \lstinline!checkunmatchedELSE! with commands that can split braces across
+ lines \emph{and} have an `else' statement--see \cref{lst:checkunmatchedELSE}.
- \begin{cmhlistings}[style=yaml]{\lstinline!checkunmatchedELSE!}{lst:checkunmatchedELSE}
+ \begin{cmhlistings}[style=yaml]{\lstinline!checkunmatchedELSE!}{lst:checkunmatchedELSE}
checkunmatchedELSE:
pgfkeysifdefined: 1
DTLforeach: 1
ifthenelse: 1
\end{cmhlistings}
\item[\color{red}\verbitem{checkunmatchedbracket}] Assuming you keep \lstinline!alwaysLookforSplitBrackets!
- set to \lstinline!1! (which is the default) then you don't need to worry about \lstinline!checkunmatchedbracket!.
+ set to \lstinline!1! (which is the default) then you don't need to worry about \lstinline!checkunmatchedbracket!.
- Should you wish to deactivate \lstinline!alwaysLookforSplitBrackets! by setting it
- to \lstinline!0!, then you can populate \lstinline!checkunmatchedbracket! with commands that can
- split \emph{brackets} across lines--see \cref{lst:checkunmatchedbracket}.
+ Should you wish to deactivate \lstinline!alwaysLookforSplitBrackets! by setting it
+ to \lstinline!0!, then you can populate \lstinline!checkunmatchedbracket! with commands that can
+ split \emph{brackets} across lines--see \cref{lst:checkunmatchedbracket}.
- \begin{cmhlistings}[style=yaml]{\lstinline!checkunmatchedbracket!}{lst:checkunmatchedbracket}
+ \begin{cmhlistings}[style=yaml]{\lstinline!checkunmatchedbracket!}{lst:checkunmatchedbracket}
checkunmatchedbracket:
psSolid: 1
pgfplotstablecreatecol: 1
@@ -919,11 +1163,11 @@ and \lstinline!.indentconfig.yaml! (unless
it is called with the \lstinline!-d! switch),
which is a plain text file you can create that contains the \emph{absolute}
paths for any settings files that you wish \lstinline!latexindent.pl! to load. There is no difference
-between \lstinline!indentconfig.yaml! and \lstinline!.indentconfig.yaml!, other than the
-fact that \lstinline!.indentconfig.yaml! is a `hidden' file; thank you to \href{https://github.com/cmhughes/latexindent.pl/pull/23}{Jacobo Diaz}
-for providing this feature. In what follows, we will use \lstinline!indentconfig.yaml!, but it
-is understood that this equally represents \lstinline!.indentconfig.yaml! as well. If you
-have both files in existence, \lstinline!indentconfig.yaml! takes priority.
+between \lstinline!indentconfig.yaml! and \lstinline!.indentconfig.yaml!, other than the
+fact that \lstinline!.indentconfig.yaml! is a `hidden' file; thank you to \cite{jacobo-diaz-hidden-config}
+for providing this feature. In what follows, we will use \lstinline!indentconfig.yaml!, but it
+is understood that this equally represents \lstinline!.indentconfig.yaml! as well. If you
+have both files in existence, \lstinline!indentconfig.yaml! takes priority.
For Mac and Linux users, their home directory is \lstinline!~/username! while
Windows (Vista onwards) is \lstinline!C:\Users\username! \footnote{If you're not sure
@@ -959,7 +1203,7 @@ example, \lstinline!mysettings.yaml!. Once you have added the path to \lstinline
feel free to start changing the switches and adding more environments to it
as you see fit--have a look at \cref{lst:mysettings} for an example
that uses four tabs for the default indent, adds the \lstinline!tabbing!
-environment to the list of environments that contains alignment delimiters,
+environment to the list of environments that contains alignment delimiters,
and adds the changes we described on \cpageref{page:examsettings}.
\begin{cmhlistings}[style=yaml]{\lstinline!mysettings.yaml! (example)}{lst:mysettings}
@@ -998,16 +1242,15 @@ recognize then you'll get a warning, otherwise you'll get confirmation that
will tell you so in \lstinline!indent.log!.
\end{warning}
-\subsection{\lstinline!localSettings.yaml!}
+\subsection{\lstinline!localSettings.yaml!}\label{sec:localsettings}
You may remember on \cpageref{page:localswitch} we discussed the \lstinline!-l! switch
that tells \lstinline!latexindent.pl! to look for \lstinline!localSettings.yaml! in the
\emph{same directory} as \lstinline!myfile.tex!. This settings file will
be read \emph{after} \lstinline!defaultSettings.yaml! and, assuming they exist,
user settings.
-In contrast to the \emph{user} settings which can be named anything you like (provided that
-they are detailed in \lstinline!indentconfig.yaml!), the \emph{local} settings file
-must be called \lstinline!localSettings.yaml!. It can contain any switches that you'd
+The \emph{local} settings file may be called \lstinline!localSettings.yaml!, and
+it can contain any switches that you'd
like to change--a sample is shown in \cref{lst:localSettings}.
\begin{cmhlistings}[style=yaml]{\lstinline!localSettings.yaml! (example)}{lst:localSettings}
@@ -1030,13 +1273,17 @@ for details--if \lstinline!localSettings.yaml! can not be read then you will
get a warning, otherwise you'll get confirmation that
\lstinline!latexindent.pl! has read \lstinline!localSettings.yaml!.
+If you'd prefer to name your \lstinline!localSettings.yaml! file something different, (say, \lstinline!myyaml.yaml!) then
+you can call \lstinline!latexindent.pl! using, for example, \lstinline[breaklines=true]!latexindent.pl -l=myyaml.yaml myfile.tex!.
+
\subsection{Settings load order}\label{sec:loadorder}
\lstinline!latexindent.pl! loads the settings files in the following order:
\begin{enumerate}
- \item \lstinline!defaultSettings.yaml! (always loaded, can not be renamed)
- \item \lstinline!anyUserSettings.yaml! (and any other arbitrarily-named files specified in \lstinline!indentconfig.yaml!)
- \item \lstinline!localSettings.yaml! (if found in same directory as \lstinline!myfile.tex! and called
- with \lstinline!-l! switch; can not be renamed)
+ \item \lstinline!defaultSettings.yaml! is always loaded, and can not be renamed;
+ \item \lstinline!anyUserSettings.yaml! and any other arbitrarily-named files specified in \lstinline!indentconfig.yaml!;
+ \item \lstinline!localSettings.yaml! but only if found in the same directory as \lstinline!myfile.tex! and called
+ with \lstinline!-l! switch; this file can be renamed, provided that the call to \lstinline!latexindent.pl! is adjusted
+ accordingly (see \cref{sec:localsettings}).
\end{enumerate}
A visual representation of this is given in \cref{fig:loadorder}.
@@ -1124,17 +1371,22 @@ environment, the \lstinline!verbatim! environment \emph{will} be formatted, whic
is probably not what you want. I hope to address this in future versions, but for the
moment wrap it in a \lstinline!noIndentBlock! (see \cpageref{lst:noIndentBlockdemo}).
-You can run \lstinline!latexindent! on \lstinline!.sty! and \lstinline!.cls! files, but it may
-struggle with some of the pattern matching; if you find such a case in which it struggles, please feel free
-to report it at \href{https://github.com/cmhughes/latexindent.pl}{https://github.com/cmhughes/latexindent.pl}, and
-in the meantime, use a \lstinline!noIndentBlock! (see \cpageref{lst:noIndentBlockdemo}).
+You can run \lstinline!latexindent! on \lstinline!.sty!, \lstinline!.cls! and any filetypes
+that you specify in \lstinline[breaklines=true]!fileExtensionPreference! (see \vref{lst:fileExtensionPreference});
+if you find a case in which the script struggles, please feel free
+to report it at \cite{latexindent-home}, and
+in the meantime, consider using a \lstinline!noIndentBlock! (see \cpageref{lst:noIndentBlockdemo}).
-I hope that this script is useful to some--if you find an example where the
-script does not behave as you think it should, feel free to e-mail me or else
-come and find me on the \url{http://tex.stackexchange.com} site; I'm often around
+I hope that this script is useful to some; if you find an example where the
+script does not behave as you think it should, the best way to contact me is to
+report an issue on \cite{latexindent-home}; otherwise, feel free to find me on
+the \url{http://tex.stackexchange.com} site; I'm often around
and in the chat room.
-\printbibliography[heading=bibintoc]
+\nocite{*}
+\section{References}
+\printbibliography[heading=subbibnumbered,title={External links},notkeyword=contributor]
+\printbibliography[env=specialbib,heading=subbibnumbered,title={Contributors\label{sec:contributors}},keyword=contributor]
\appendix
\section{Required \lstinline!Perl! modules}\label{sec:requiredmodules}
@@ -1167,12 +1419,25 @@ might visit the software center, or else run
\begin{lstlisting}[numbers=none]
sudo perl -MCPAN -e 'install "File::HomeDir"'
\end{lstlisting}
+
+Linux users may be interested in exploring Perlbrew \cite{perlbrew}; possible installation and setup
+options follow for Ubuntu (other distributions will need slightly different commands).
+\begin{lstlisting}[numbers=none]
+sudo apt-get install perlbrew
+perlbrew install perl-5.20.1
+perlbrew switch perl-5.20.1
+sudo apt-get install curl
+curl -L http://cpanmin.us | perl - App::cpanminus
+cpanm YAML::Tiny
+cpanm File::HomeDir
+\end{lstlisting}
+
Strawberry Perl users on Windows might use
\lstinline!CPAN client!. All of the modules are readily available on CPAN \cite{cpan}.
-As of Version 2.1R, \lstinline!indent.log! will contain details of the location
+As of Version 2.1, \lstinline!indent.log! will contain details of the location
of the Perl modules on your system. \lstinline!latexindent.exe! is a standalone
-executable for Windows (and therefore does not require a Perl distribution) and caches copies of the Perl modules onto your system; if you
+executable for Windows (and therefore does not require a Perl distribution) and caches copies of the Perl modules onto your system; if you
wish to see where they are cached, use the \lstinline!trace! option, e.g \lstinline!latexindent.exe -t myfile.tex!.
\section{The \lstinline!arara! rule}
@@ -1207,41 +1472,41 @@ mode then you can write \lstinline!% arara: indent: {trace: off}!.
Of course, you can apply these types of modifications to \emph{any} of the identifiers,
but proceed with caution if you intend to do this for \lstinline!overwrite!.
+\section{Updating the \lstinline!path! variable}\label{sec:updating-path}
+\lstinline!latexindent.pl! ships with a few scripts that can update the \lstinline!path! variables
+\footnote{Thanks to \cite{jasjuang} for this feature!}. If you're
+on a Linux or Mac machine, then you'll want \lstinline!CMakeLists.txt! from \cite{latexindent-home}.
+\subsection{Add to path for Linux}
+To add \lstinline!latexindent.pl! to the path for Linux, follow these steps:
+\begin{enumerate}
+ \item download \lstinline!latexindent.pl!, \lstinline!defaultSettings.yaml!, to your
+ chosen directory from \cite{latexindent-home} ;
+ \item within your directory, create a directory called \lstinline!path-helper-files! and
+ download \lstinline!CMakeLists.txt! and \lstinline!cmake_uninstall.cmake.in!
+ from \cite{latexindent-home}/path-helper-files to this directory;
+ \item run \lstinline!ls /usr/local/bin! to see what is \emph{currently} in there;
+ \item run the commands given in \cref{linux-add-to-path};
+ \item run \lstinline!ls /usr/local/bin! again to check that \lstinline!latexindent.pl! and \lstinline!defaultSettings.yaml!
+ have been added.
+\end{enumerate}
+\begin{cmhlistings}[style=yaml,numbers=none]{Add to path from a Linux terminal}{linux-add-to-path}
+sudo apt-get install cmake
+sudo apt-get update && sudo apt-get install build-essential
+mkdir build && cd build
+cmake ../path-helper-files
+sudo make install
+\end{cmhlistings}
+To \emph{remove} the files, run \lstinline!sudo make uninstall!.
+\subsection{Add to path for Windows}
+To add \lstinline!latexindent.exe! to the path for Windows, follow these steps:
+\begin{enumerate}
+ \item download \lstinline!latexindent.exe!, \lstinline!defaultSettings.yaml!, \lstinline!add-to-path.bat!
+ from \cite{latexindent-home} to your chosen directory;
+ \item open a command prompt and run \lstinline!echo %path%! to see what is \emph{currently} in your \lstinline!%path%! variable;
+ \item right click on \lstinline!add-to-path.bat! and \emph{Run as administrator};
+ \item log out, and log back in;
+ \item open a command prompt and run \lstinline!echo %path%! to check that the appropriate directory has been added to your
+ \lstinline!%path%!.
+\end{enumerate}
+To \emph{remove} the directory from your \lstinline!%path%!, run \lstinline!remove-from-path.bat! as administrator.
\end{document}
-
-set local settings to include psset as an item
-\documentclass[pstricks,border=30pt,12pt]{standalone}
-\usepackage{pst-eucl}
-\psset{opacity=.2}
-\begin{document}
-\begin{pspicture}(7,7)
- \pstGeonode[PosAngle={-90,-90,0,-90,180}]{A}(5,0){B}(7,1){C}(2,1){D}(0,5){A_1}
- \pstTranslation[PosAngle=120]{A}{A_1}{B,C,D}[B_1,C_1,D_1]
- \pspolygon(A)(B)(C)(C_1)(D_1)(A_1)
- \psline(A_1)(B_1)(C_1)(B)(B_1)
- \pstMiddleAB[PosAngle=20]{B}{C_1}{E}
- \psline(E)(C)
- \pstMarkAngle{D}{E}{C}{}
- \psset{linestyle=dashed}
- \psline(C)(D)(D_1)
- \psline(A)(D)
- \psline(B)(D)(C_1)
- \psline(D)(E)
- \psset{linestyle=none,fillstyle=solid,fillcolor=gray}
- \pspolygon(A)(D)(D_1)(A_1)
- \pspolygon(B)(C_1)(D)
-\end{pspicture}
-\end{document}
-\begin{frame}[label=timeline]{The journey\ldots}
- \begin{tikzpicture}
- \pause
- \node[cloudy](spring2010){Spr...
- \node[below=0mm of spring2010...
- \pause
- \node[cloudy,right=of spring20...
- \node[below=0mm of summer2010...
- \pause
- \node[cloudy,right=of summer2...
- \node[below=0mm of fall2010...
- \end{tikzpicture}
-\end{frame}
diff --git a/Master/texmf-dist/doc/support/latexindent/documentation/manual.pdf b/Master/texmf-dist/doc/support/latexindent/documentation/manual.pdf
deleted file mode 100644
index 0fec7c336b1..00000000000
--- a/Master/texmf-dist/doc/support/latexindent/documentation/manual.pdf
+++ /dev/null
Binary files differ
diff --git a/Master/texmf-dist/doc/support/latexindent/success/alignmentoutsideEnvironments.tex b/Master/texmf-dist/doc/support/latexindent/success/alignmentoutsideEnvironments.tex
index 0edbbbd28e1..04053c027a9 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/alignmentoutsideEnvironments.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/alignmentoutsideEnvironments.tex
@@ -1,18 +1,18 @@
% arara: indent: {overwrite: true, trace: yes, silent: yes}
\matrix{%
- % \begin{tabular}
- & A_1 & A_2 & A_3 & A_4 & A_5 & A_6 & A_7 & A_8 & A_9 \\\hline
- A_1 & 0 & & & & & & & & \\
- A_2 & & 0 & & & & & & & \\
- A_3 & & & 0 & & & & & & \\
- A_4 & & & & 0 & & & & & \\
- A_5 & & & & & 0 & & & & \\
- A_6 & & & & & & 0 & & & \\
- A_7 & & & & & & & 0 & & \\
- A_8 & & & & & & & & 0 & \\
- A_9 & & & & & & & & & 0 \\
- %* \end{align}
+ %* \begin{tabular}
+ & A_1 & A_2 & A_3 & A_4 & A_5 & A_6 & A_7 & A_8 & A_9 \\\hline
+ A_1 & 0 & & & & & & & & \\
+ A_2 & & 0 & & & & & & & \\
+ A_3 & & & 0 & & & & & & \\
+ A_4 & & & & 0 & & & & & \\
+ A_5 & & & & & 0 & & & & \\
+ A_6 & & & & & & 0 & & & \\
+ A_7 & & & & & & & 0 & & \\
+ A_8 & & & & & & & & 0 & \\
+ A_9 & & & & & & & & & 0 \\
+ %* \end{tabular}
}
\begin{tabular}
& A_1 & A_2 & A_3 & A_4 & A_5 & A_6 & A_7 & A_8 & A_9 \\\hline
diff --git a/Master/texmf-dist/doc/support/latexindent/success/braceTest.tex b/Master/texmf-dist/doc/support/latexindent/success/braceTest.tex
index ac6b72d6be4..b389b436602 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/braceTest.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/braceTest.tex
@@ -48,7 +48,7 @@ some other text
\parbox{
\begin{something}
-
+
\end{something}
}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/bracketTest.tex b/Master/texmf-dist/doc/support/latexindent/success/bracketTest.tex
new file mode 100644
index 00000000000..34cf9df16fb
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/bracketTest.tex
@@ -0,0 +1,6 @@
+\cmh[
+ here is some text
+]
+\cmh{
+ here is some text
+}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/environments.tex b/Master/texmf-dist/doc/support/latexindent/success/environments.tex
index bf1d4d86c80..986474dca79 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/environments.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/environments.tex
@@ -9,7 +9,7 @@ text
\begin{align*}
{\color{red}(3x^3+y)}(-4x^3+y) & = {\color{red}(3x^3+y)}(-4x^3)+{\color{red}(3x^3+y)}(y) \\
& = -12x^6-4x^3y+3x^3y+y^2 \\
- & = -12x^6-x^3y+y^2
+ & = -12x^6-x^3y+y^2
\end{align*}
\end{enumerate}
\begin{enumerate}
@@ -19,7 +19,7 @@ text
\begin{align*}
{\color{red}(3x^3+y)}(-4x^3+y) & = {\color{red}(3x^3+y)}(-4x^3)+{\color{red}(3x^3+y)}(y) \\
& = -12x^6-4x^3y+3x^3y+y^2 \\
- & = -12x^6-x^3y+y^2
+ & = -12x^6-x^3y+y^2
\end{align*}
\end{enumerate}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/filecontents1.tex b/Master/texmf-dist/doc/support/latexindent/success/filecontents1.tex
new file mode 100644
index 00000000000..46e501ebaa0
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/filecontents1.tex
@@ -0,0 +1,18 @@
+% arara: indent: {overwrite: true, trace: false, localSettings: yes}
+
+\documentclass{article}
+\begin{filecontents}{mybib.bib}
+ \begin{document}
+ here is some text
+ \end{document}
+\end{filecontents}
+
+\begin{document}
+\begin{myotherenvironment}
+ some text goes here
+ some text goes here
+ some text goes here
+ some text goes here
+\end{myotherenvironment}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/filecontents2.tex b/Master/texmf-dist/doc/support/latexindent/success/filecontents2.tex
new file mode 100644
index 00000000000..54307023361
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/filecontents2.tex
@@ -0,0 +1,21 @@
+% arara: indent: {overwrite: true, trace: false, localSettings: yes}
+
+\documentclass{article}
+\usepackage{verbatim}
+\begin{filecontents}{mybib.bib}
+ \begin{document}
+ here is some text
+ \end{document}
+\end{filecontents}
+
+\begin{document}
+
+\begin{verbatim}
+\begin{filecontents}{mybib.bib}
+ \begin{document}
+ here is some text
+ \end{document}
+ \end{filecontents}
+\end{verbatim}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/ifelsefiSmall.tex b/Master/texmf-dist/doc/support/latexindent/success/ifelsefiSmall.tex
new file mode 100644
index 00000000000..f4b4bad3e64
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/ifelsefiSmall.tex
@@ -0,0 +1,10 @@
+\ifnum\radius>5
+ \ifnum\radius<16
+ \draw[decorate,decoration={crosses},orange!\pgfmathresult!black] (1,1) circle ( \radius ex-5ex);
+ \fi
+\fi
+\ifnum
+ 1
+\else
+ 2
+\fi
diff --git a/Master/texmf-dist/doc/support/latexindent/success/items1.tex b/Master/texmf-dist/doc/support/latexindent/success/items1.tex
new file mode 100644
index 00000000000..29be75d5fdc
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/items1.tex
@@ -0,0 +1,10 @@
+\begin{itemize}
+ \item one
+ here is some text
+ here is some text
+ here is some text
+ \item two
+ here is some text
+ here is some text
+ here is some text
+\end{itemize}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/items2.tex b/Master/texmf-dist/doc/support/latexindent/success/items2.tex
new file mode 100644
index 00000000000..76d70b95729
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/items2.tex
@@ -0,0 +1,21 @@
+\begin{enumerate}
+ \item one
+ here is some text
+ here is some text
+ here is some text
+ \item two
+ here is some text
+ here is some text
+ here is some text
+ \begin{itemize}
+ \item bullet
+ here is some text
+ here is some text
+ here is some text
+ \item bullet
+ here is some text
+ here is some text
+ here is some text
+ \end{itemize}
+ some text
+\end{enumerate}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/items3.tex b/Master/texmf-dist/doc/support/latexindent/success/items3.tex
new file mode 100644
index 00000000000..30460f40e72
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/items3.tex
@@ -0,0 +1,22 @@
+\begin{myenv}
+ \begin{itemize}
+ \item one
+ here is some text
+ here is some text
+ here is some text
+ \item two
+ here is some text
+ here is some text
+ here is some text
+ \end{itemize}
+\end{myenv}
+\begin{itemize}
+\item one
+ here is some text
+ here is some text
+ here is some text
+\item two
+ here is some text
+ here is some text
+ here is some text
+\end{itemize}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/items4.tex b/Master/texmf-dist/doc/support/latexindent/success/items4.tex
new file mode 100644
index 00000000000..49383c47e1a
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/items4.tex
@@ -0,0 +1,22 @@
+\begin{myenv}
+\begin{itemize}
+\item one
+ here is some text
+ here is some text
+ here is some text
+\item two
+ here is some text
+ here is some text
+ here is some text
+\end{itemize}
+\end{myenv}
+\begin{itemize}
+\item one
+ here is some text
+ here is some text
+ here is some text
+\item two
+ here is some text
+ here is some text
+ here is some text
+\end{itemize}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/matrix.tex b/Master/texmf-dist/doc/support/latexindent/success/matrix.tex
index 729a922b8d7..79c959e1ba2 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/matrix.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/matrix.tex
@@ -9,6 +9,6 @@
& 2 & & & \fullmoon & & & & \\
{\color{blue}*} & 1 & & & & & {\color{blue}\newmoon} & & \\\hline
& & 1 & 2 & 3 & 4 & 5 & 6 & \\
- \% & & {\color{red}*} & {\color{red}*} & & {\color{red}*} & & &
+ \% & & {\color{red}*} & {\color{red}*} & & {\color{red}*} & & &
\end{matrix}
\]
diff --git a/Master/texmf-dist/doc/support/latexindent/success/nestedalignment.tex b/Master/texmf-dist/doc/support/latexindent/success/nestedalignment.tex
index 4bf214f2e4f..6578b4f4e00 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/nestedalignment.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/nestedalignment.tex
@@ -9,7 +9,7 @@
\end{array}
\right.
\)
- & Substitution {\em or }Addition & Because it is easy to solve for $x$ in the 1st equation
+ & Substitution {\em or }Addition & Because it is easy to solve for $x$ in the 1st equation
{\em or}
Because it is easy to multiply the first equation by -1 \\ \hline
\(
@@ -29,5 +29,5 @@
\end{array}
\right.
\)
- & Substitution & Because the first equation can easily be solved for one of the variables
+ & Substitution & Because the first equation can easily be solved for one of the variables
\end{tabular}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/nestedalignment1.tex b/Master/texmf-dist/doc/support/latexindent/success/nestedalignment1.tex
index 0e6aa609a03..9a19ca8da43 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/nestedalignment1.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/nestedalignment1.tex
@@ -5,7 +5,7 @@
\%\&\%\% & & \\ % & & 2x+y & =8
x+y & = & 6 \\
2x+y & =8
- 2x+y \&\& & = & 8 % trailine comment
+ 2x+y \&\& & = & 8 % trailine comment
\end{tabular}
here's another line $\{ x^2 + 5x \}$
diff --git a/Master/texmf-dist/doc/support/latexindent/success/outputfile.tex b/Master/texmf-dist/doc/support/latexindent/success/outputfile.tex
index 4d5506777d4..aac040a48c7 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/outputfile.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/outputfile.tex
@@ -48,7 +48,7 @@ some other text
\parbox{
\begin{something}
-
+
\end{something}
}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/sampleAFTER.tex b/Master/texmf-dist/doc/support/latexindent/success/sampleAFTER.tex
index c9b38625713..b1f37474fe0 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/sampleAFTER.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/sampleAFTER.tex
@@ -25,7 +25,7 @@
a \emph{decreasing} function. Similarly, if $a>0$ then $g$ is
\emph{concave up} and if $a<0$ then $g$ is \emph{concave down}. Graphical
representations of these statements are given in \cref{poly:fig:linquad}.
-
+
\begin{figure}[!htb]
\setlength{\figurewidth}{.2\textwidth}
\begin{subfigure}{\figurewidth}
@@ -94,18 +94,18 @@
\caption{Typical graphs of linear and quadratic functions.}
\label{poly:fig:linquad}
\end{figure}
-
+
Let's look a little more closely at the formulas for $f$ and $g$ in
\cref{poly:eq:linquad}. Note that the \emph{degree}
of $f$ is $1$ since the highest power of $x$ that is present in the
formula for $f(x)$ is $1$. Similarly, the degree of $g$ is $2$ since
the highest power of $x$ that is present in the formula for $g(x)$
is $2$.
-
+
In this section we will build upon our knowledge of these elementary
functions. In particular, we will generalize the functions $f$ and $g$ to a function $p$ that has
any degree that we wish.
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -161,7 +161,7 @@
\end{subproblem}
\end{problem}
\end{essentialskills}
-
+
\subsection*{Power functions with positive exponents}
The study of polynomials will rely upon a good knowledge
of power functions| you may reasonably ask, what is a power function?
@@ -171,17 +171,17 @@
f(x) = a_n x^n
\]
where $n$ can be any real number.
-
+
Note that for this section we will only be concerned with the
case when $n$ is a positive integer.
\end{pccdefinition}
-
+
You may find assurance in the fact that you are already very comfortable
with power functions that have $n=1$ (linear) and $n=2$ (quadratic). Let's
explore some power functions that you might not be so familiar with.
As you read \cref{poly:ex:oddpow,poly:ex:evenpow}, try and spot
as many patterns and similarities as you can.
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -199,12 +199,12 @@
the long-run behavior of each of the functions is the same, and in particular
\begin{align*}
f(x)\rightarrow\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same results hold for $g$ and $h$.
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htb]
\begin{minipage}{.45\textwidth}
\begin{tikzpicture}
@@ -254,7 +254,7 @@
\label{poly:fig:evenpow}
\end{minipage}%
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -271,12 +271,12 @@
of each of the functions is the same, and in particular
\begin{align*}
F(x)\rightarrow\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} F(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} F(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same result holds for $G$ and $H$.
\end{pccsolution}
\end{pccexample}
-
+
\begin{doyouunderstand}
\begin{problem}
Repeat \cref{poly:ex:oddpow,poly:ex:evenpow} using (respectively)
@@ -285,7 +285,7 @@
\begin{shortsolution}
The functions $f$, $g$, and $h$ have domain $(-\infty,\infty)$ and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -303,11 +303,11 @@
\legend{$f$,$g$,$h$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
f(x)\rightarrow-\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same is true for $g$ and $h$.
\end{shortsolution}
@@ -317,7 +317,7 @@
\begin{shortsolution}
The functions $F$, $G$, and $H$ have domain $(-\infty,\infty)$ and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -335,18 +335,18 @@
\legend{$F$,$G$,$H$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
F(x)\rightarrow-\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} F(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} F(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same is true for $G$ and $H$.
\end{shortsolution}
\end{subproblem}
\end{problem}
\end{doyouunderstand}
-
+
\subsection*{Polynomial functions}
Now that we have a little more familiarity with power functions,
we can define polynomial functions. Provided that you were comfortable
@@ -357,7 +357,7 @@
and quadratic functions. Once you've studied the examples and problems
in this section, you'll hopefully agree that polynomial functions
are remarkably predictable.
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -376,11 +376,11 @@
\end{itemize}
In particular, we call $a_n$ the \emph{leading} coefficient, and $a_nx^n$ the
\emph{leading term}.
-
+
Note that if a polynomial is given in factored form, then the degree can be found
by counting the number of linear factors.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -416,7 +416,7 @@
\end{enumerate}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -440,7 +440,7 @@
shape and long-run behavior to the functions described in \cref{poly:ex:oddpow}.
\end{itemize}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -536,7 +536,7 @@
\caption{Graphs to illustrate typical curves of polynomial functions.}
\label{poly:fig:typical}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -550,7 +550,7 @@
to guide you.
\begin{shortsolution}
$a_1<0$:
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -563,9 +563,9 @@
\addplot expression[domain=-10:8]{-(x+2)};
\end{axis}
\end{tikzpicture}
-
+
$a_2<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -578,9 +578,9 @@
\addplot expression[domain=-4:4]{-(x^2-6)};
\end{axis}
\end{tikzpicture}
-
+
$a_3<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -593,9 +593,9 @@
\addplot expression[domain=-7.5:7.5]{-0.05*(x+6)*x*(x-6)};
\end{axis}
\end{tikzpicture}
-
+
$a_4<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -608,9 +608,9 @@
\addplot expression[domain=-2.35:5.35,samples=100]{-0.2*(x-5)*x*(x-3)*(x+2)};
\end{axis}
\end{tikzpicture}
-
+
$a_5<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -626,11 +626,11 @@
\end{shortsolution}
\end{problem}
\end{doyouunderstand}
-
+
\fixthis{poly: Need a more basic example here- it can have a similar
format to the multiple zeros example, but just keep it simple; it should
be halfway between the 2 examples surrounding it}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -642,24 +642,24 @@
\begin{align*}
p(x) & =(x-3)^2(x+4)^2 \\
q(x) & =x(x+2)^2(x-1)^2(x-3) \\
- r(x) & =x(x-3)^3(x+1)^2
+ r(x) & =x(x-3)^3(x+1)^2
\end{align*}
Find the degree of $p$, $q$, and $r$, and decide if the functions bounce off or cut
through the horizontal axis at each of their zeros.
\begin{pccsolution}
The degree of $p$ is 4. Referring to \cref{poly:fig:bouncep},
the curve bounces off the horizontal axis at both zeros, $3$ and $4$.
-
+
The degree of $q$ is 6. Referring to \cref{poly:fig:bounceq},
the curve bounces off the horizontal axis at $-2$ and $1$, and cuts
through the horizontal axis at $0$ and $3$.
-
+
The degree of $r$ is 6. Referring to \cref{poly:fig:bouncer},
the curve bounces off the horizontal axis at $-1$, and cuts through
the horizontal axis at $0$ and at $3$, although is flattened immediately to the left and right of $3$.
\end{pccsolution}
\end{pccexample}
-
+
\setlength{\figurewidth}{0.25\textwidth}
\begin{figure}[!htb]
\begin{subfigure}{\figurewidth}
@@ -712,7 +712,7 @@
\caption{}
\label{poly:fig:moremultiple}
\end{figure}
-
+
\begin{pccdefinition}[Multiple zeros]\label{poly:def:multzero}
Let $p$ be a polynomial that has a repeated linear factor $(x-a)^n$. Then we say
that $p$ has a multiple zero at $a$ of multiplicity $n$ and
@@ -724,7 +724,7 @@
\end{itemize}
If $n=1$, then we say that $p$ has a \emph{simple} zero at $a$.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -786,7 +786,7 @@
Let's check if the formula we have written satisfies this requirement
\begin{align*}
p(1) & = (1)(4)(2)(-1) \\
- & = -8
+ & = -8
\end{align*}
which is clearly not correct| it is close though. We can correct this by
multiplying $p$ by a constant $k$; so let's assume that
@@ -807,7 +807,7 @@
evaluate $p(2)$
\begin{align*}
p(2) & =k(4)^2(-1) \\
- & =-16k
+ & =-16k
\end{align*}
We solve the equation $4=-8k$ and obtain $k=-\frac{1}{4}$ and conclude that the
formula for $q(x)$ is
@@ -817,8 +817,8 @@
\end{enumerate}
\end{pccsolution}
\end{pccexample}
-
-
+
+
\fixthis{Chris: need sketching polynomial problems}
\begin{pccspecialcomment}[Steps to follow when sketching polynomial functions]
\begin{steps}
@@ -865,12 +865,12 @@
\item We draw the details we have obtained so far on \cref{poly:fig:simplecubicp1}. Given
that the curve of $p$ looks like the curve of $x^3$ in the long-run, we are able to complete a sketch of the
graph of $p$ in \cref{poly:fig:simplecubicp2}.
-
+
Note that we can not find the coordinates of the local minimums, local maximums, and inflection
points| for the moment we make reasonable guesses as to where these points are (you'll find how
to do this in calculus).
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -909,7 +909,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -934,7 +934,7 @@
\item We mark the details we have found so far on \cref{poly:fig:degree5p1}. Given that
the curve of $q$ looks like the curve of $-x^5$ in the long-run, we can complete \cref{poly:fig:degree5p2}.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -973,7 +973,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -1000,7 +1000,7 @@
the curve of $r$ looks like the curve of $x^6$ in the long-run, we complete the graph
of $r$ in \cref{poly:fig:degree6p2}.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -1038,7 +1038,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -1058,7 +1058,7 @@
$x$ represents the length of a side, and $V(x)$ represents the volume
of the box, we necessarily require both values to be positive; we illustrate
the part of the curve that applies to this problem using a solid line.
-
+
\begin{figure}[!htb]
\centering
\begin{tikzpicture}
@@ -1080,21 +1080,21 @@
\caption{$y=V(x)$}
\label{poly:fig:opentoppedbox}
\end{figure}
-
+
According to \cref{poly:fig:opentoppedbox}, the maximum volume of such a box is
approximately $\unit[4000]{cm^2}$, and we achieve it using a base of length
approximately $\unit[20]{cm}$. Since the base is square and each sheet of cardboard
is $\unit[1200]{cm^2}$, we conclude that the dimensions of each box are $\unit[20]{cm}\times\unit[20]{cm}\times\unit[30]{cm}$.
\end{pccsolution}
\end{pccexample}
-
+
\subsection*{Complex zeros}
There has been a pattern to all of the examples that we have seen so far|
the degree of the polynomial has dictated the number of \emph{real} zeros that the
polynomial has. For example, the function $p$ in \cref{poly:ex:simplecubic}
has degree $3$, and $p$ has $3$ real zeros; the function $q$ in \cref{poly:ex:degree5}
has degree $5$ and $q$ has $5$ real zeros.
-
+
You may wonder if this result can be generalized| does every polynomial that
has degree $n$ have $n$ real zeros? Before we tackle the general result,
let's consider an example that may help motivate it.
@@ -1113,7 +1113,7 @@
x^2+1=0
\end{equation}
The solutions to \cref{poly:eq:complx} are $\pm i$.
-
+
We conclude that $c$ has $3$ zeros: $0$ and $\pm i$; we note that \emph{not
all of them are real}.
\end{pccexample}
@@ -1143,7 +1143,7 @@
We begin by factoring $p$
\begin{align*}
p(x) & =x^4-2x^3+5x^2 \\
- & =x^2(x^2-2x+5)
+ & =x^2(x^2-2x+5)
\end{align*}
We note that $0$ is a zero of $p$ with multiplicity $2$. The other zeros of $p$
can be found by solving the equation
@@ -1154,7 +1154,7 @@
\begin{align*}
x & =\frac{2\pm\sqrt{(-2)^2}-20}{2(1)} \\
& =\frac{2\pm\sqrt{-16}}{2} \\
- & =1\pm 2i
+ & =1\pm 2i
\end{align*}
We conclude that $p$ has $4$ zeros: $0$ (multiplicity $2$), and $1\pm 2i$ (simple).
\end{pccsolution}
@@ -1169,13 +1169,13 @@
We know that the zeros of a polynomial can be found by analyzing the linear
factors. We are given the zeros, and have to work backwards to find the
linear factors.
-
+
We begin by assuming that $p$ has the form
\begin{align*}
p(x) & =(x-(2-i\sqrt{2}))(x-(2+i\sqrt{2})) \\
& =x^2-x(2+i\sqrt{2})-x(2-i\sqrt{2})+(2-i\sqrt{2})(2+i\sqrt{2}) \\
& =x^2-4x+(4-2i^2) \\
- & =x^2-4x+6
+ & =x^2-4x+6
\end{align*}
We conclude that a possible formula for a polynomial function, $p$,
that has zeros at $2\pm i\sqrt{2}$ is
@@ -1235,8 +1235,8 @@
\end{enumerate}
\end{shortsolution}
\end{problem}
-
-
+
+
\begin{figure}[!htb]
\setlength{\figurewidth}{0.3\textwidth}
\begin{subfigure}{\figurewidth}
@@ -1287,10 +1287,10 @@
\caption{}
\label{poly:fig:findformula}
\end{figure}
-
-
-
-
+
+
+
+
\begin{exercises}
%===================================
% Author: Hughes
@@ -1459,14 +1459,14 @@
\begin{align*}
p(x) & = (x-1)(x+2)(x-3) \\
m(x) & = -(x-1)(x+2)(x-3) \\
- n(x) & = (x-1)(x+2)(x-3)(x+1)(x+4)
+ n(x) & = (x-1)(x+2)(x-3)(x+1)(x+4)
\end{align*}
Note that for our present purposes we are not concerned with the vertical scale of the graphs.
\begin{subproblem}
Identify both on the graph {\em and} algebraically, the zeros of each polynomial.
\begin{shortsolution}
$y=p(x)$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-5,xmax=5,
@@ -1477,9 +1477,9 @@
\addplot[soldot] coordinates{(-2,0)(1,0)(3,0)};
\end{axis}
\end{tikzpicture}
-
+
$y=m(x)$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-5,xmax=5,
@@ -1490,9 +1490,9 @@
\addplot[soldot] coordinates{(-2,0)(1,0)(3,0)};
\end{axis}
\end{tikzpicture}
-
+
$y=n(x)$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-5,xmax=5,
@@ -1503,7 +1503,7 @@
\addplot[soldot] coordinates{(-4,0)(-2,0)(-1,0)(1,0)(3,0)};
\end{axis}
\end{tikzpicture}
-
+
The zeros of $p$ are $-2$, $1$, and $3$; the zeros of $m$ are $-2$, $1$, and $3$; the zeros of $n$ are
$-4$, $-2$, $-1$, and $3$.
\end{shortsolution}
@@ -1520,7 +1520,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -1773,7 +1773,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -1792,7 +1792,7 @@
$\dd\lim_{x\rightarrow\infty}s(x)=\infty$,
\end{shortsolution}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -1917,7 +1917,7 @@
is positive.
\begin{shortsolution}
Assuming that $a_3>0$:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -1937,7 +1937,7 @@
is negative.
\begin{shortsolution}
Assuming that $a_3<0$:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -1961,7 +1961,7 @@
coefficient of $q$ is positive. Hint: only one of the zeros is simple.
\begin{shortsolution}
Assuming that $a_4>0$ there are $2$ different options:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -1982,7 +1982,7 @@
coefficient of $q$ is negative.
\begin{shortsolution}
Assuming that $a_4<0$ there are $2$ different options:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -2194,7 +2194,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -2238,7 +2238,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -2290,7 +2290,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2298,7 +2298,7 @@
\begin{problem}[Find a formula from a table]\label{poly:prob:findformula}
\Crefrange{poly:tab:findformulap}{poly:tab:findformulas} show values of polynomial functions, $p$, $q$,
$r$, and $s$.
-
+
\begin{table}[!htb]
\centering
\begin{widepage}
@@ -2382,7 +2382,7 @@
\end{subtable}
\end{widepage}
\end{table}
-
+
\begin{subproblem}
Assuming that all of the zeros of $p$ are shown (in \cref{poly:tab:findformulap}), how many zeros does $p$ have?
\begin{shortsolution}
@@ -2433,7 +2433,7 @@
\end{subproblem}
\end{problem}
\end{exercises}
-
+
\section{Rational functions}
\subsection*{Power functions with negative exponents}
The study of rational functions will rely upon a good knowledge
@@ -2455,21 +2455,21 @@
the long-run behavior of each of the functions is the same, and in particular
\begin{align*}
f(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
\end{align*}
The same results hold for $g$ and $h$. Note also that each of the functions
has a \emph{vertical asymptote} at $0$. We see that
\begin{align*}
f(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} f(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} f(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same results hold for $g$ and $h$.
-
+
The curve of a function that has a vertical asymptote is necessarily separated
into \emph{branches}| each of the functions $f$, $g$, and $h$ have $2$ branches.
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htb]
\begin{minipage}{.45\textwidth}
\begin{tikzpicture}
@@ -2525,8 +2525,8 @@
\label{rat:fig:evenpow}
\end{minipage}%
\end{figure}
-
-
+
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2543,7 +2543,7 @@
the long-run behavior of each of the functions is the same, and in particular
\begin{align*}
F(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
\end{align*}
As in \cref{rat:ex:oddpow}, $F$ has a horizontal asymptote that
has equation $y=0$.
@@ -2551,7 +2551,7 @@
has a \emph{vertical asymptote} at $0$. We see that
\begin{align*}
F(x)\rightarrow \infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} F(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} F(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same results hold for $G$ and $H$. Each of the functions $F$, $G$, and $H$
have $2$ branches.
@@ -2569,7 +2569,7 @@
\begin{shortsolution}
The functions $k$, $m$, and $n$ have domain $(-\infty,0)\cup (0,\infty)$, and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -2590,14 +2590,14 @@
\legend{$k$,$m$,$n$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
k(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
\mathllap{\text{and }} k(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty \\
\intertext{and also}
k(x)\rightarrow \infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} k(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} k(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same are true for $m$ and $n$.
\end{shortsolution}
@@ -2607,7 +2607,7 @@
\begin{shortsolution}
The functions $K$, $M$, and $N$ have domain $(-\infty,0)\cup (0,\infty)$, and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -2628,21 +2628,21 @@
\legend{$K$,$M$,$N$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
K(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
\mathllap{\text{and }} K(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty \\
\intertext{and also}
K(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} K(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} K(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same are true for $M$ and $N$.
\end{shortsolution}
\end{subproblem}
\end{problem}
\end{doyouunderstand}
-
+
\subsection*{Rational functions}
\begin{pccdefinition}[Rational functions]\label{rat:def:function}
Rational functions have the form
@@ -2650,7 +2650,7 @@
r(x) = \frac{p(x)}{q(x)}
\]
where both $p$ and $q$ are polynomials.
-
+
Note that
\begin{itemize}
\item the domain or $r$ will be all real numbers, except those that
@@ -2658,13 +2658,13 @@
\item the zeros of $r$ are the zeros of $p$, i.e the real numbers
that make the \emph{numerator}, $p(x)$, equal to $0$.
\end{itemize}
-
+
\Cref{rat:ex:oddpow,rat:ex:evenpow} are particularly important because $r$
will behave like $\frac{1}{x}$, or $\frac{1}{x^2}$ around its vertical asymptotes,
depending on the power that the relevant term is raised to| we will demonstrate
this in what follows.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2699,7 +2699,7 @@
\end{enumerate}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2779,7 +2779,7 @@
\caption{}
\label{rat:fig:whichiswhich}
\end{figure}
-
+
\begin{pccsolution}
Let's start with the function $r$. Note that domain of $r$ is $(-\infty,3)\cup(0,3)$, so
we search for a function that has a vertical asymptote at $3$. There
@@ -2787,18 +2787,18 @@
but note that the function in \cref{rat:fig:which3} also has a vertical asymptote at $-2$
which is not consistent with the formula for $r(x)$. Therefore, $y=r(x)$
is graphed in \cref{rat:fig:which2}.
-
+
The function $q$ has domain $(-\infty,-5)\cup(-5,\infty)$, so we search
for a function that has a vertical asymptote at $-5$. The only candidate
is the curve shown in \cref{rat:fig:which1}; note that the curve also goes through $(2,0)$,
which is consistent with the formula for $q(x)$, since $q(2)=0$, i.e $q$
has a zero at $2$.
-
+
The function $k$ has domain $(-\infty,-2)\cup(-2,3)\cup(3,\infty)$, and
has vertical asymptotes at $-2$ and $3$. This is consistent with
the graph in \cref{rat:fig:which3} (and is the only curve that
has $3$ branches).
-
+
We note that each function behaves like $\frac{1}{x}$ around its vertical asymptotes,
because each linear factor in each denominator is raised to the power $1$; if (for example)
the definition of $r$ was instead
@@ -2809,7 +2809,7 @@
the graph of $r$ would be very different. We will deal with these cases in the examples that follow.
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2827,7 +2827,7 @@
so we are not surprised to see that each curve has $3$ branches. We also note that
the numerator of each function is the same, which tells us that each function has
only $1$ zero at $2$.
-
+
The functions $g$ and $h$ are different from those that we have considered previously,
because they have a repeated factor in the denominator. Notice in particular
the way that the functions behave around their asymptotes:
@@ -2910,7 +2910,7 @@
\caption{}
\label{rat:fig:repfactd}
\end{figure}
-
+
\Cref{rat:def:function} says that the zeros of
the rational function $r$ that has formula $r(x)=\frac{p(x)}{q(x)}$ are
the zeros of $p$. Let's explore this a little more.
@@ -2929,9 +2929,9 @@
x+5=0
\]
The zero of $\alpha$ is $-5$.
-
+
Similarly, we may solve $9-x=0$ to find the zero of $\beta$, which is clearly $9$.
-
+
The zeros of $\gamma$ satisfy the equation
\[
17x^2-10=0
@@ -2943,7 +2943,7 @@
The zeros of $\gamma$ are $\pm\frac{10}{17}$.
\end{pccsolution}
\end{pccexample}
-
+
\subsection*{Long-run behavior}
Our focus so far has been on the behavior of rational functions around
their \emph{vertical} asymptotes. In fact, rational functions also
@@ -2966,7 +2966,7 @@
\end{pccdefinition}
We will concentrate on functions that have horizontal asymptotes until
we reach \cref{rat:sec:oblique}.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -2979,7 +2979,7 @@
and obtained the curves shown in \cref{rat:fig:horizasymp}. Kebede decides
to test his knowledgeable friend \pccname{Oscar}, and asks him
to match the formulas to the graphs.
-
+
\begin{figure}[!htb]
\setlength{\figurewidth}{0.3\textwidth}
\begin{subfigure}{\figurewidth}
@@ -3050,7 +3050,7 @@
\caption{Horizontal asymptotes}
\label{rat:fig:horizasymp}
\end{figure}
-
+
Oscar notices that each function has a vertical asymptote at $3$ and a zero at $-1$.
The main thing that catches Oscar's eye is that each function has a different
coefficient in the numerator, and that each curve has a different horizontal asymptote.
@@ -3064,14 +3064,14 @@
that since the degree of the numerator and the degree of the denominator is the same
for each of the functions $r$, $s$, and $t$, the horizontal asymptote will be determined
by evaluating the ratio of their leading coefficients.
-
+
Oscar therefore says that $r$ should have a horizontal asymptote $y=\frac{1}{1}=1$, $s$ should
have a horizontal asymptote $y=\frac{2}{1}=2$, and $t$ should have a horizontal asymptote
$y=\frac{3}{1}=3$. Kebede is able to finish the problem from here, and says that $r$ is
shown in \cref{rat:fig:horizasymp2}, $s$ is shown in \cref{rat:fig:horizasymp1}, and
$t$ is shown in \cref{rat:fig:horizasymp3}.
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -3080,7 +3080,7 @@
\pccname{Xiao} and \pccname{Dwayne} saw \cref{rat:ex:horizasymp} but are a little confused
about horizontal asymptotes. What does it mean to say that a function $r$ has a horizontal
asymptote?
-
+
They decide to explore the concept by
constructing a table of values for the rational functions $R$ and $S$ that have formulas
\[
@@ -3119,13 +3119,13 @@
\end{tabular}
\end{minipage}
\end{table}
-
+
Xiao and Dwayne study \cref{rat:tab:plusinfty,rat:tab:minusinfty} and decide that
the functions $R$ and $S$ never actually touch their horizontal asymptotes, but they
do get infinitely close. They also feel as if they have a better understanding of
what it means to study the behavior of a function as $x\rightarrow\pm\infty$.
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -3142,7 +3142,7 @@
\]
We also notice that the numerators of each function are quite similar| indeed, each
function has a zero at $2$, but how does each function behave around their zero?
-
+
Using \cref{rat:fig:repfactn} to guide us, we note that
\begin{itemize}
\item $f$ has a horizontal intercept $(2,0)$, but the curve of
@@ -3152,7 +3152,7 @@
\item $h$ has a horizontal intercept $(2,0)$, and the curve of $h$
also cuts the axis, but appears flattened as it does so.
\end{itemize}
-
+
We can further enrich our study by discussing the long-run behavior of each function.
Using the tools of \cref{rat:def:longrun}, we can deduce that
\begin{itemize}
@@ -3162,7 +3162,7 @@
study this more in \cref{rat:sec:oblique}).
\end{itemize}
\end{pccexample}
-
+
\begin{figure}[!htb]
\setlength{\figurewidth}{0.3\textwidth}
\begin{subfigure}{\figurewidth}
@@ -3235,7 +3235,7 @@
\caption{}
\label{rat:fig:repfactn}
\end{figure}
-
+
\subsection*{Holes}
Rational functions have a vertical asymptote at $a$ if the denominator is $0$ at $a$.
What happens if the numerator is $0$ at the same place? In this case, we say that the rational
@@ -3250,7 +3250,7 @@
$(a,r(a))$ on the curve $y=r(x)$ by
using a hollow circle, $\circ$.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -3262,12 +3262,12 @@
\]
in their calculators, and can not decide if the correct graph
is \cref{rat:fig:hole} or \cref{rat:fig:hole1}.
-
+
Luckily for them, Oscar is nearby, and can help them settle the debate.
Oscar demonstrates that
\begin{align*}
r(x) & =\frac{(x+3)(x-2)}{(x-2)} \\
- & = x+3
+ & = x+3
\end{align*}
but only when $x\ne 2$, because the function is undefined at $2$. Oscar
says that this necessarily means that the domain or $r$ is
@@ -3275,7 +3275,7 @@
(-\infty,2)\cup(2,\infty)
\]
and that $r$ must have a hole at $2$.
-
+
Mohammed and Sue are very grateful for the clarification, and conclude that
the graph of $r$ is shown in \cref{rat:fig:hole1}.
\begin{figure}[!htb]
@@ -3319,7 +3319,7 @@
\end{minipage}%
\end{figure}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -3333,12 +3333,12 @@
make the denominator equal to $0$. Notice that
\begin{align*}
f(x) & = \frac{x(x+3)}{x(x-4)} \\
- & = \frac{x+3}{x-4}
+ & = \frac{x+3}{x-4}
\end{align*}
provided that $x\ne 0$. Since $0$ makes the numerator
and the denominator 0 at the same time, we say that $f$ has a hole at $(0,-\nicefrac{3}{4})$.
Note that this necessarily means that $f$ does not have a vertical intercept.
-
+
We also note $f$ has a vertical asymptote at $4$; the function is graphed in \cref{rat:fig:holeex}.
\begin{figure}[!htb]
\centering
@@ -3362,9 +3362,9 @@
\label{rat:fig:holeex}
\end{figure}
\end{pccexample}
-
-
-
+
+
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -3374,7 +3374,7 @@
if a rational function has a vertical asymptote, then it can
not possibly have local minimums and maximums, nor can it have
global minimums and maximums.
-
+
Trang says this statement is not always true. She plots the functions
$f$ and $g$ that have formulas
\[
@@ -3383,7 +3383,7 @@
in \cref{rat:fig:minmax1,rat:fig:minmax2} and shows them to Seamus. On seeing the graphs,
Seamus quickly corrects himself, and says that $f$ has a local (and global)
maximum of $2$ at $0$, and that $g$ has a local (and global) minimum of $-2$ at $0$.
-
+
\begin{figure}[!htb]
\begin{minipage}{.45\textwidth}
\begin{tikzpicture}[/pgf/declare function={f=-32*(x-1)*(x+1)/(( x-2)^2*(x+2)^2);}]
@@ -3427,19 +3427,19 @@
\label{rat:fig:minmax2}
\end{minipage}%
\end{figure}
-
+
Seamus also notes that (in its domain) the function $f$ is always concave down, and
that (in its domain) the function $g$ is always concave up. Furthermore, Trang
observes that each function behaves like $\frac{1}{x^2}$ around each of its vertical
asymptotes, because each linear factor in the denominator is raised to the power $2$.
-
+
\pccname{Oscar} stops by and reminds both students about the long-run behavior; according
to \cref{rat:def:longrun} since the degree of the denominator is greater than the
degree of the numerator (in both functions), each function has a horizontal asymptote
at $y=0$.
\end{pccexample}
-
-
+
+
\investigation*{}
%===================================
% Author: Pettit/Hughes
@@ -3448,12 +3448,12 @@
\begin{problem}[The spaghetti incident]
The same Queen from \vref{exp:prob:queenschessboard} has recovered from
the rice experiments, and has called her loyal jester for another challenge.
-
+
The jester has an $11-$inch piece of uncooked spaghetti that he puts on a table;
he uses a book to cover $\unit[1]{inch}$ of it so that
$\unit[10]{inches}$ hang over the edge. The jester then produces a box of $\unit{mg}$
weights that can be hung from the spaghetti.
-
+
The jester says it will take $\unit[y]{mg}$ to break the spaghetti when hung
$\unit[x]{inches}$ from the edge, according to the rule $y=\frac{100}{x}$.
\begin{margintable}
@@ -3537,7 +3537,7 @@
note that this necessarily means that you will not be able to plot all of the points.
\begin{shortsolution}
The graph of $y=\frac{100}{x}$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -3567,9 +3567,9 @@
\end{subproblem}
The Queen looks forward to more food-related investigations from her jester.
\end{problem}
-
-
-
+
+
+
%===================================
% Author: Adams (Hughes)
% Date: March 2012
@@ -3593,17 +3593,17 @@
Paying off the debt in $2$ years, we use
\begin{align*}
M & = \frac{2000\cdot 0.015}{1-(1+0.015)^{-24}} \\
- & \approx 99.85
+ & \approx 99.85
\end{align*}
The monthly payments are \$99.85.
-
+
Paying off the debt in $1$ year, we use
\begin{align*}
M & = \frac{2000\cdot 0.015}{1-(1+0.015)^{-12}} \\
- & \approx 183.36
+ & \approx 183.36
\end{align*}
The monthly payments are \$183.36
-
+
In the $2$-year model we would pay a total of $\$99.85\cdot 12=\$2396.40$. In the
$1$-year model we would pay a total of $\$183.36\cdot 12=\$2200.32$. We would therefore
save $\$196.08$ if we went with the $1$-year model instead of the $2$-year model.
@@ -3619,20 +3619,20 @@
For the $20$-year loan we use
\begin{align*}
M & = \frac{300000\cdot \frac{0.052}{12}}{1-\left( 1+\frac{0.052}{12} \right)^{-12\cdot 20}} \\
- & \approx 2013.16
+ & \approx 2013.16
\end{align*}
The monthly payments are \$2013.16.
-
+
For the $30$-year loan we use
\begin{align*}
M & = \frac{300000\cdot \frac{0.052}{12}}{1-\left( 1+\frac{0.052}{12} \right)^{-12\cdot 30}} \\
- & \approx 1647.33
+ & \approx 1647.33
\end{align*}
The monthly payments are \$1647.33.
-
+
The total amount paid during the $20$-year loan is $\$2013.16\cdot 12\cdot 20=\$483,158.40$.
The total amount paid during the $30$-year loan is $\$1647.33\cdot 12\cdot 30=\$593,038.80$.
-
+
Recommendation: if you can afford the payments, choose the $20$-year loan.
\end{shortsolution}
\end{subproblem}
@@ -3662,7 +3662,7 @@
This means that the monthly payments will be calculated using
\begin{align*}
M & = \frac{14000\cdot \frac{0.04}{12}}{1-\left( 1+\frac{0.04}{12} \right)^{-12\cdot 5}} \\
- & \approx 257.83
+ & \approx 257.83
\end{align*}
The monthly payments will be $\$257.83$. The total amount paid will be
$\$257.83\cdot 5\cdot 12=\$15,469.80$, of which $\$1469.80$ is interest.
@@ -3670,7 +3670,7 @@
This means that the monthly payments will be calculated using
\begin{align*}
M & = \frac{12000\cdot \frac{0.08}{12}}{1-\left( 1+\frac{0.08}{12} \right)^{-12\cdot 5}} \\
- & \approx 243.32
+ & \approx 243.32
\end{align*}
The monthly payments will be $\$243.32$. The total amount paid
will be $\$243.32\cdot 5\cdot 12 =\$14,599.20$, of which $\$2599.2$ is
@@ -3681,7 +3681,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
\begin{exercises}
%===================================
% Author: Hughes
@@ -3783,7 +3783,7 @@
$\begin{aligned}[t]
r(0) & =\frac{(0-2)(0+3)}{(0+5)(0-7)} \\
& =\frac{-6}{-35} \\
- & =\frac{6}{35}
+ & =\frac{6}{35}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3793,7 +3793,7 @@
$\begin{aligned}[t]
r(1) & =\frac{(1-2)(1+3)}{(1+5)(1-7)} \\
& =\frac{-4}{-36} \\
- & =\frac{1}{9}
+ & =\frac{1}{9}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3803,7 +3803,7 @@
$\begin{aligned}[t]
r(2) & =\frac{(2-2)(2+3)}{(2+5)(2-7)} \\
& = \frac{0}{-50} \\
- & =0
+ & =0
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3813,7 +3813,7 @@
$\begin{aligned}[t]
r(4) & =\frac{(4-2)(4+3)}{(4+5)(4-7)} \\
& =\frac{14}{-27} \\
- & =-\frac{14}{27}
+ & =-\frac{14}{27}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3822,9 +3822,9 @@
\begin{shortsolution}
$\begin{aligned}[t]
r(7) & =\frac{(7-2)(7+3)}{(7+5)(7-7)} \\
- & =\frac{50}{0}
+ & =\frac{50}{0}
\end{aligned}$
-
+
$r(7)$ is undefined.
\end{shortsolution}
\end{subproblem}
@@ -3834,7 +3834,7 @@
$\begin{aligned}[t]
r(-3) & =\frac{(-3-2)(-3+3)}{(-3+5)(-3-7)} \\
& =\frac{0}{-20} \\
- & =0
+ & =0
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3843,9 +3843,9 @@
\begin{shortsolution}
$\begin{aligned}[t]
r(-5) & =\frac{(-5-2)(-5+3)}{(-5+5)(-5-7)} \\
- & =\frac{14}{0}
+ & =\frac{14}{0}
\end{aligned}$
-
+
$r(-5)$ is undefined.
\end{shortsolution}
\end{subproblem}
@@ -3856,7 +3856,7 @@
r\left( \frac{1}{2} \right) & = \frac{\left( \frac{1}{2}-2 \right)\left( \frac{1}{2}+3 \right)}{\left( \frac{1}{2}+5 \right)\left( \frac{1}{2}-7 \right)} \\
& =\frac{-\frac{3}{2}\cdot\frac{7}{2}}{\frac{11}{2}\left( -\frac{13}{2} \right)} \\
& =\frac{-\frac{21}{4}}{-\frac{143}{4}} \\
- & =\frac{37}{143}
+ & =\frac{37}{143}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3908,7 +3908,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -3925,7 +3925,7 @@
\end{itemize}
\end{shortsolution}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -3997,7 +3997,7 @@
\label{rat:fig:findformula}
\end{widepage}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4034,7 +4034,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4099,7 +4099,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4181,7 +4181,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4212,7 +4212,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: Feb 2011
@@ -4265,8 +4265,8 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
-
+
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4309,7 +4309,7 @@
Sketch a graph of $r$.
\begin{shortsolution}
A graph of $r$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -4329,7 +4329,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -4367,8 +4367,8 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
-
+
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -4419,8 +4419,8 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
-
+
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4428,7 +4428,7 @@
\begin{problem}[Find a formula from a table]\label{rat:prob:findformula}
\Crefrange{rat:tab:findformular}{rat:tab:findformulau} show values of rational functions $r$, $q$, $s$,
and $t$. Assume that any values marked with an X are undefined.
-
+
\begin{table}[!htb]
\begin{widepage}
\centering
@@ -4525,7 +4525,7 @@
r(-4) & = \frac{-4-3}{-4+2} \\
& = \frac{7}{2} \\
\end{aligned}$
-
+
$r(-3)=\ldots$ etc
\end{shortsolution}
\end{subproblem}
@@ -4541,9 +4541,9 @@
\begin{shortsolution}
$\begin{aligned}[t]
s(-4) & =\frac{-4+2}{(-4-3)(-4+1)} \\
- & =-\frac{2}{21}
+ & =-\frac{2}{21}
\end{aligned}$
-
+
$s(-3)=\ldots$ etc
\end{shortsolution}
\end{subproblem}
@@ -4563,13 +4563,13 @@
\end{subproblem}
\end{problem}
\end{exercises}
-
+
\section{Graphing rational functions (horizontal asymptotes)}
\reformatstepslist{R} % the steps list should be R1, R2, \ldots
We studied rational functions in the previous section, but were
not asked to graph them; in this section we will demonstrate the
steps to be followed in order to sketch graphs of the functions.
-
+
Remember from \vref{rat:def:function} that rational functions have
the form
\[
@@ -4583,7 +4583,7 @@
in this section \emph{will have a horizontal asymptote} (see \vref{rat:def:longrun}).
The cases in which the degree of $p$ is greater than the degree of $q$
is covered in the next section.
-
+
Before we begin, it is important to remember the following:
\begin{itemize}
\item Our sketches will give a good representation of the overall
@@ -4612,10 +4612,10 @@
find the exact coordinates of local minimums, local maximums, and points
of inflection.
\end{pccspecialcomment}
-
+
The examples that follow show how \crefrange{rat:step:first}{rat:step:last} can be
applied to a variety of different rational functions.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4641,7 +4641,7 @@
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4678,14 +4678,14 @@
\end{subfigure}%
\caption{$y=\dfrac{1}{x-2}$}
\end{figure}
-
+
The function $r$ in \cref{rat:ex:1overxminus2p2} has a horizontal asymptote which has equation $y=0$.
This asymptote lies on the horizontal axis, and you might (understandably) find it hard
to distinguish between the two lines (\cref{rat:fig:1overxminus2p2}). When faced
with such a situation, it is perfectly acceptable to draw the horizontal axis
as a dashed line| just make sure to label it correctly. We will demonstrate this
in the next example.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4711,12 +4711,12 @@
is, because we know what the overall shape will be. Let's compute $v(2)$
\begin{align*}
v(2) & =\dfrac{10}{2} \\
- & = 5
+ & = 5
\end{align*}
We therefore mark the point $(2,5)$ on \cref{rat:fig:1overxp2}, and then complete the sketch using
the details we found in the previous steps.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4760,7 +4760,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4778,7 +4778,7 @@
\begin{align*}
u(x) & =\frac{-4(x^2-9)}{x^2-8x+15} \\
& =\frac{-4(x+3)(x-3)}{(x-5)(x-3)} \\
- & =\frac{-4(x+3)}{x-5}
+ & =\frac{-4(x+3)}{x-5}
\end{align*}
provided that $x\ne 3$. Therefore $u$ has a vertical asymptote at $5$ and
a hole at $3$. The curve of $u$ has $2$ branches.
@@ -4788,7 +4788,7 @@
\item We put the details we have obtained so far on \cref{rat:fig:1overxminus2p1}. Notice
that there is only one way to complete the graph, which we have done in \cref{rat:fig:1overxminus2p2}.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4833,12 +4833,12 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
\Cref{rat:ex:1overxminus2p2,rat:ex:1overxp1,rat:ex:asympandholep1} have focused on functions
that only have one vertical asymptote; the remaining examples in this section
concern functions that have more than one vertical asymptote. We will demonstrate
that \crefrange{rat:step:first}{rat:step:last} still apply.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4862,20 +4862,20 @@
of the numerator and denominator, we say that $w$ has a horizontal
asymptote with equation $y=\frac{2}{1}=2$.
\item We put the details we have obtained so far on \cref{rat:fig:sketchtwoasymptp1}.
-
+
The function $w$ is a little more complicated than the functions that
we have considered in the previous examples because the curve has $3$
branches. When graphing such functions, it is generally a good idea to start with the branch
for which you have the most information| in this case, that is the \emph{middle} branch
on the interval $(-5,4)$.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
(because of our observations about the behavior of $w$ around its vertical asymptotes),
which we have done in \cref{rat:fig:sketchtwoasymptp2}.
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4921,12 +4921,12 @@
\end{subfigure}%
\caption{$y=\dfrac{2(x+3)(x-5)}{(x+5)(x-4)}$}
\end{figure}
-
+
The rational functions that we have considered so far have had simple
factors in the denominator; each function has behaved like $\frac{1}{x}$
around each of its vertical asymptotes. \Cref{rat:ex:2asympnozeros,rat:ex:2squaredasymp}
consider functions that have a repeated factor in the denominator.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4949,17 +4949,17 @@
denominator of $f$ is $2$. $f$ has a horizontal asymptote with
equation $y=0$.
\item We put the details we have obtained so far on \cref{rat:fig:2asympnozerosp1}.
-
+
The function $f$ is similar to the function $w$ that we considered in \cref{rat:ex:sketchtwoasymp}|
it has two vertical asymptotes and $3$ branches, but in contrast to $w$ it does not have any zeros.
-
+
We sketch $f$ in \cref{rat:fig:2asympnozerosp2}, using the middle branch as our guide
because we have the most information about the function on the interval $(-5,4)$.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
because of our observations about the behavior of $f$ around its vertical asymptotes (it behaves like $\frac{1}{x}$),
which we have done in \cref{rat:fig:2asympnozerosp2}.
-
+
Note that we are not yet able to find the local minimum of $f$ algebraically on the interval $(-5,4)$,
so we make a reasonable guess as to where it is| we can be confident that it is above the horizontal axis
since $f$ has no zeros. You may think that this is unsatisfactory, but once we have the tools of calculus, we will
@@ -4967,7 +4967,7 @@
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -5011,7 +5011,7 @@
\end{subfigure}%
\caption{$y=\dfrac{100}{(x+5)(x-4)^2}$}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -5037,19 +5037,19 @@
\cref{rat:fig:2squaredasymp1}. The function $g$ is similar to the functions
we considered in \cref{rat:ex:sketchtwoasymp,rat:ex:2asympnozeros} because
it has $2$ vertical asymptotes and $3$ branches.
-
+
We sketch $g$ using the middle branch as our guide because we have the most information
about $g$ on the interval $(-3,5)$. Note that there is no other way to draw this branch
without introducing other zeros which $g$ does not have.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
because of our observations about the behavior of $g$ around its vertical asymptotes| it
behaves like $\frac{1}{x^2}$.
-
+
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -5093,14 +5093,14 @@
\end{subfigure}%
\caption{$y=\dfrac{50(2-x)}{(x+3)^2(x-5)^2}$}
\end{figure}
-
+
Each of the rational functions that we have considered so far has had either
a \emph{simple} zero, or no zeros at all. Remember from our work on polynomial
functions, and particularly \vref{poly:def:multzero}, that a \emph{repeated} zero
corresponds to the curve of the function behaving differently at the zero
when compared to how the curve behaves at a simple zero. \Cref{rat:ex:doublezero} details a
function that has a non-simple zero.
-
+
%===================================
% Author: Hughes
% Date: June 2012
@@ -5127,20 +5127,20 @@
\cref{rat:fig:doublezerop1}. The function $h$ is different
from the functions that we have considered in previous examples because
of the multiplicity of the zero at $3$.
-
+
We sketch $h$ using the middle branch as our guide because we have the most information
about $h$ on the interval $(-4,6)$. Note that there is no other way to draw this branch
without introducing other zeros which $h$ does not have| also note how
the curve bounces off the horizontal axis at $3$.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
because of our observations about the behavior of $h$ around its vertical asymptotes| it
behaves like $\frac{1}{x}$.
-
+
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -5199,7 +5199,7 @@
at $b$, and a vertical asymptote at $c$. Furthermore, these functions
behave like $\frac{1}{x}$ around their vertical asymptote, and the
curve of each function will have $2$ branches.
-
+
Katie has been working with $3$ functions that have the form given
in \cref{rat:eq:deducecurve}, and has followed \crefrange{rat:step:first}{rat:step:penultimate};
her results are shown in \cref{rat:fig:deducecurve}. There is just one
@@ -5207,7 +5207,7 @@
Help Katie finish each graph by deducing the curve of each function.
\begin{shortsolution}
\Vref{rat:fig:deducecurve1}
-
+
\begin{tikzpicture}[/pgf/declare function={f=3*(x+4)/(x+5);}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5222,9 +5222,9 @@
\addplot[pccplot] expression[domain=-4.76923:10,samples=50]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducecurve2}
-
+
\begin{tikzpicture}[/pgf/declare function={f=-3*(x-2)/(x-4);}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5239,9 +5239,9 @@
\addplot[pccplot] expression[domain=4.85714:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducecurve4}
-
+
\begin{tikzpicture}[/pgf/declare function={f=2*(x-6)/(x-4);}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5258,7 +5258,7 @@
\end{tikzpicture}
\end{shortsolution}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -5316,7 +5316,7 @@
\label{rat:fig:deducecurve}
\end{widepage}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: June 2012
@@ -5331,13 +5331,13 @@
at $b$ and $c$, and vertical asymptotes at $d$ and $e$. Furthermore,
these functions behave like $\frac{1}{x}$ around both vertical asymptotes,
and the curve of the function will have $3$ branches.
-
+
David has followed \crefrange{rat:step:first}{rat:step:penultimate} for
$3$ separate functions, and drawn the results in \cref{rat:fig:deducehard}.
Help David finish each graph by deducing the curve of each function.
\begin{shortsolution}
\Vref{rat:fig:deducehard1}
-
+
\begin{tikzpicture}[/pgf/declare function={f=(x-6)*(x+3)/( (x-4)*(x+1));}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5354,9 +5354,9 @@
\addplot[pccplot] expression[domain=4.24276:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducehard2}
-
+
\begin{tikzpicture}[/pgf/declare function={f=3*(x-2)*(x+3)/( (x-6)*(x+5));}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5373,9 +5373,9 @@
\addplot[pccplot] expression[domain=7.34324:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducehard3}
-
+
\begin{tikzpicture}[/pgf/declare function={f=2*(x-7)*(x+3)/( (x+6)*(x-5));}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5392,10 +5392,10 @@
\addplot[pccplot] expression[domain=5.25586:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\end{shortsolution}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -5470,7 +5470,7 @@
$y=\dfrac{4}{x+2}$
\begin{shortsolution}
Vertical intercept: $(0,2)$; vertical asymptote: $x=-2$, horizontal asymptote: $y=0$.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -5494,7 +5494,7 @@
Vertical intercept:$\left( 0,\frac{1}{9} \right)$;
horizontal intercept: $\left( \frac{1}{2},0 \right)$;
vertical asymptotes: $x=-3$, $x=3$, horizontal asymptote: $y=0$.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -5519,7 +5519,7 @@
\begin{shortsolution}
Vertical intercept $\left( 0,-\frac{3}{5} \right)$; horizontal
intercept: $(-3,0)$; vertical asymptote: $x=5$; horizontal asymptote: $y=1$.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -5544,7 +5544,7 @@
\begin{shortsolution}
Vertical intercept: $(0,-3)$; horizontal intercept: $\left( -\frac{3}{2},0 \right)$;
vertical asymptote: $x=\frac{1}{3}$, horizontal asymptote: $y=\frac{2}{3}$.
-
+
\begin{tikzpicture}[/pgf/declare function={f=(2*x+3)/(3*x-1);}]
\begin{axis}[
framed,
@@ -5568,7 +5568,7 @@
Vertical intercept: $\left( 0,-\frac{4}{9} \right)$;
horizontal intercepts: $(2,0)$, $(-2,0)$;
vertical asymptotes: $x=-3$, $x=3$; horizontal asymptote: $y=-1$.
-
+
\begin{tikzpicture}[/pgf/declare function={f=(4-x^2)/(x^2-9);}]
\begin{axis}[
framed,
@@ -5594,7 +5594,7 @@
Vertical intercept: $\left( 0,\frac{4}{5} \right)$;
horizontal intercepts: $\left( -\frac{5}{4},0 \right)$, $\left( \frac{4}{3},0 \right)$;
vertical asymptotes: $x=-\frac{5}{2}$, $x=5$; horizontal asymptote: $y=6$.
-
+
\begin{tikzpicture}[/pgf/declare function={f=(4*x+5)*(3*x-4)/((2*x+5)*(x-5));}]
\begin{axis}[
framed,
@@ -5724,7 +5724,7 @@
R(x)=
\begin{dcases}
\frac{2}{x+3}, & x<-5 \\
- \frac{x-4}{x-10}, & x\geq -5
+ \frac{x-4}{x-10}, & x\geq -5
\end{dcases}
\]
Evaluate each of the following.
@@ -5762,7 +5762,7 @@
\end{subproblem}
\end{problem}
\end{exercises}
-
+
\section{Graphing rational functions (oblique asymptotes)}\label{rat:sec:oblique}
\begin{subproblem}
$y=\dfrac{x^2+1}{x-4}$
@@ -5771,7 +5771,7 @@
\item $\left( 0,-\frac{1}{4} \right)$
\item Vertical asymptote: $x=4$.
\item A graph of the function is shown below
-
+
\begin{tikzpicture}[/pgf/declare function={f=(x^2+1)/(x-4);}]
\begin{axis}[
framed,
@@ -5798,7 +5798,7 @@
\item $(0,0)$, $(-3,0)$
\item Vertical asymptote: $x=5$, horizontal asymptote: none.
\item A graph of the function is shown below
-
+
\begin{tikzpicture}[/pgf/declare function={f=x^3*(x+3)/(x-5);}]
\begin{axis}[
framed,
diff --git a/Master/texmf-dist/doc/support/latexindent/success/sampleBEFORE.tex b/Master/texmf-dist/doc/support/latexindent/success/sampleBEFORE.tex
index bf62bb9ee1f..ae704bd4bc1 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/sampleBEFORE.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/sampleBEFORE.tex
@@ -25,7 +25,7 @@
a \emph{decreasing} function. Similarly, if $a>0$ then $g$ is
\emph{concave up} and if $a<0$ then $g$ is \emph{concave down}. Graphical
representations of these statements are given in \cref{poly:fig:linquad}.
-
+
\begin{figure}[!htb]
\setlength{\figurewidth}{.2\textwidth}
\begin{subfigure}{\figurewidth}
@@ -94,18 +94,18 @@
\caption{Typical graphs of linear and quadratic functions.}
\label{poly:fig:linquad}
\end{figure}
-
+
Let's look a little more closely at the formulas for $f$ and $g$ in
\cref{poly:eq:linquad}. Note that the \emph{degree}
of $f$ is $1$ since the highest power of $x$ that is present in the
formula for $f(x)$ is $1$. Similarly, the degree of $g$ is $2$ since
the highest power of $x$ that is present in the formula for $g(x)$
is $2$.
-
+
In this section we will build upon our knowledge of these elementary
functions. In particular, we will generalize the functions $f$ and $g$ to a function $p$ that has
any degree that we wish.
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -161,7 +161,7 @@
\end{subproblem}
\end{problem}
\end{essentialskills}
-
+
\subsection*{Power functions with positive exponents}
The study of polynomials will rely upon a good knowledge
of power functions| you may reasonably ask, what is a power function?
@@ -171,17 +171,17 @@
f(x) = a_n x^n
\]
where $n$ can be any real number.
-
+
Note that for this section we will only be concerned with the
case when $n$ is a positive integer.
\end{pccdefinition}
-
+
You may find assurance in the fact that you are already very comfortable
with power functions that have $n=1$ (linear) and $n=2$ (quadratic). Let's
explore some power functions that you might not be so familiar with.
As you read \cref{poly:ex:oddpow,poly:ex:evenpow}, try and spot
as many patterns and similarities as you can.
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -199,12 +199,12 @@
the long-run behavior of each of the functions is the same, and in particular
\begin{align*}
f(x)\rightarrow\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same results hold for $g$ and $h$.
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htb]
\begin{minipage}{.45\textwidth}
\begin{tikzpicture}
@@ -254,7 +254,7 @@
\label{poly:fig:evenpow}
\end{minipage}%
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -271,12 +271,12 @@
of each of the functions is the same, and in particular
\begin{align*}
F(x)\rightarrow\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} F(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} F(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same result holds for $G$ and $H$.
\end{pccsolution}
\end{pccexample}
-
+
\begin{doyouunderstand}
\begin{problem}
Repeat \cref{poly:ex:oddpow,poly:ex:evenpow} using (respectively)
@@ -285,7 +285,7 @@
\begin{shortsolution}
The functions $f$, $g$, and $h$ have domain $(-\infty,\infty)$ and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -303,11 +303,11 @@
\legend{$f$,$g$,$h$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
f(x)\rightarrow-\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same is true for $g$ and $h$.
\end{shortsolution}
@@ -317,7 +317,7 @@
\begin{shortsolution}
The functions $F$, $G$, and $H$ have domain $(-\infty,\infty)$ and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -335,18 +335,18 @@
\legend{$F$,$G$,$H$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
F(x)\rightarrow-\infty & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} F(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} F(x)\rightarrow-\infty & \text{ as } x\rightarrow-\infty
\end{align*}
The same is true for $G$ and $H$.
\end{shortsolution}
\end{subproblem}
\end{problem}
\end{doyouunderstand}
-
+
\subsection*{Polynomial functions}
Now that we have a little more familiarity with power functions,
we can define polynomial functions. Provided that you were comfortable
@@ -357,7 +357,7 @@
and quadratic functions. Once you've studied the examples and problems
in this section, you'll hopefully agree that polynomial functions
are remarkably predictable.
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -376,11 +376,11 @@
\end{itemize}
In particular, we call $a_n$ the \emph{leading} coefficient, and $a_nx^n$ the
\emph{leading term}.
-
+
Note that if a polynomial is given in factored form, then the degree can be found
by counting the number of linear factors.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -416,7 +416,7 @@
\end{enumerate}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -440,7 +440,7 @@
shape and long-run behavior to the functions described in \cref{poly:ex:oddpow}.
\end{itemize}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -536,7 +536,7 @@
\caption{Graphs to illustrate typical curves of polynomial functions.}
\label{poly:fig:typical}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -550,7 +550,7 @@
to guide you.
\begin{shortsolution}
$a_1<0$:
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -563,9 +563,9 @@
\addplot expression[domain=-10:8]{-(x+2)};
\end{axis}
\end{tikzpicture}
-
+
$a_2<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -578,9 +578,9 @@
\addplot expression[domain=-4:4]{-(x^2-6)};
\end{axis}
\end{tikzpicture}
-
+
$a_3<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -593,9 +593,9 @@
\addplot expression[domain=-7.5:7.5]{-0.05*(x+6)*x*(x-6)};
\end{axis}
\end{tikzpicture}
-
+
$a_4<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -608,9 +608,9 @@
\addplot expression[domain=-2.35:5.35,samples=100]{-0.2*(x-5)*x*(x-3)*(x+2)};
\end{axis}
\end{tikzpicture}
-
+
$a_5<0$
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -626,11 +626,11 @@
\end{shortsolution}
\end{problem}
\end{doyouunderstand}
-
+
\fixthis{poly: Need a more basic example here- it can have a similar
format to the multiple zeros example, but just keep it simple; it should
be halfway between the 2 examples surrounding it}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -642,24 +642,24 @@
\begin{align*}
p(x) & =(x-3)^2(x+4)^2 \\
q(x) & =x(x+2)^2(x-1)^2(x-3) \\
- r(x) & =x(x-3)^3(x+1)^2
+ r(x) & =x(x-3)^3(x+1)^2
\end{align*}
Find the degree of $p$, $q$, and $r$, and decide if the functions bounce off or cut
through the horizontal axis at each of their zeros.
\begin{pccsolution}
The degree of $p$ is 4. Referring to \cref{poly:fig:bouncep},
the curve bounces off the horizontal axis at both zeros, $3$ and $4$.
-
+
The degree of $q$ is 6. Referring to \cref{poly:fig:bounceq},
the curve bounces off the horizontal axis at $-2$ and $1$, and cuts
through the horizontal axis at $0$ and $3$.
-
+
The degree of $r$ is 6. Referring to \cref{poly:fig:bouncer},
the curve bounces off the horizontal axis at $-1$, and cuts through
the horizontal axis at $0$ and at $3$, although is flattened immediately to the left and right of $3$.
\end{pccsolution}
\end{pccexample}
-
+
\setlength{\figurewidth}{0.25\textwidth}
\begin{figure}[!htb]
\begin{subfigure}{\figurewidth}
@@ -712,7 +712,7 @@
\caption{}
\label{poly:fig:moremultiple}
\end{figure}
-
+
\begin{pccdefinition}[Multiple zeros]\label{poly:def:multzero}
Let $p$ be a polynomial that has a repeated linear factor $(x-a)^n$. Then we say
that $p$ has a multiple zero at $a$ of multiplicity $n$ and
@@ -724,7 +724,7 @@
\end{itemize}
If $n=1$, then we say that $p$ has a \emph{simple} zero at $a$.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -786,7 +786,7 @@
Let's check if the formula we have written satisfies this requirement
\begin{align*}
p(1) & = (1)(4)(2)(-1) \\
- & = -8
+ & = -8
\end{align*}
which is clearly not correct| it is close though. We can correct this by
multiplying $p$ by a constant $k$; so let's assume that
@@ -807,7 +807,7 @@
evaluate $p(2)$
\begin{align*}
p(2) & =k(4)^2(-1) \\
- & =-16k
+ & =-16k
\end{align*}
We solve the equation $4=-8k$ and obtain $k=-\frac{1}{4}$ and conclude that the
formula for $q(x)$ is
@@ -817,8 +817,8 @@
\end{enumerate}
\end{pccsolution}
\end{pccexample}
-
-
+
+
\fixthis{Chris: need sketching polynomial problems}
\begin{pccspecialcomment}[Steps to follow when sketching polynomial functions]
\begin{steps}
@@ -865,12 +865,12 @@
\item We draw the details we have obtained so far on \cref{poly:fig:simplecubicp1}. Given
that the curve of $p$ looks like the curve of $x^3$ in the long-run, we are able to complete a sketch of the
graph of $p$ in \cref{poly:fig:simplecubicp2}.
-
+
Note that we can not find the coordinates of the local minimums, local maximums, and inflection
points| for the moment we make reasonable guesses as to where these points are (you'll find how
to do this in calculus).
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -909,7 +909,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -934,7 +934,7 @@
\item We mark the details we have found so far on \cref{poly:fig:degree5p1}. Given that
the curve of $q$ looks like the curve of $-x^5$ in the long-run, we can complete \cref{poly:fig:degree5p2}.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -973,7 +973,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -1000,7 +1000,7 @@
the curve of $r$ looks like the curve of $x^6$ in the long-run, we complete the graph
of $r$ in \cref{poly:fig:degree6p2}.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -1038,7 +1038,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -1058,7 +1058,7 @@
$x$ represents the length of a side, and $V(x)$ represents the volume
of the box, we necessarily require both values to be positive; we illustrate
the part of the curve that applies to this problem using a solid line.
-
+
\begin{figure}[!htb]
\centering
\begin{tikzpicture}
@@ -1080,21 +1080,21 @@
\caption{$y=V(x)$}
\label{poly:fig:opentoppedbox}
\end{figure}
-
+
According to \cref{poly:fig:opentoppedbox}, the maximum volume of such a box is
approximately $\unit[4000]{cm^2}$, and we achieve it using a base of length
approximately $\unit[20]{cm}$. Since the base is square and each sheet of cardboard
is $\unit[1200]{cm^2}$, we conclude that the dimensions of each box are $\unit[20]{cm}\times\unit[20]{cm}\times\unit[30]{cm}$.
\end{pccsolution}
\end{pccexample}
-
+
\subsection*{Complex zeros}
There has been a pattern to all of the examples that we have seen so far|
the degree of the polynomial has dictated the number of \emph{real} zeros that the
polynomial has. For example, the function $p$ in \cref{poly:ex:simplecubic}
has degree $3$, and $p$ has $3$ real zeros; the function $q$ in \cref{poly:ex:degree5}
has degree $5$ and $q$ has $5$ real zeros.
-
+
You may wonder if this result can be generalized| does every polynomial that
has degree $n$ have $n$ real zeros? Before we tackle the general result,
let's consider an example that may help motivate it.
@@ -1113,7 +1113,7 @@
x^2+1=0
\end{equation}
The solutions to \cref{poly:eq:complx} are $\pm i$.
-
+
We conclude that $c$ has $3$ zeros: $0$ and $\pm i$; we note that \emph{not
all of them are real}.
\end{pccexample}
@@ -1143,7 +1143,7 @@
We begin by factoring $p$
\begin{align*}
p(x) & =x^4-2x^3+5x^2 \\
- & =x^2(x^2-2x+5)
+ & =x^2(x^2-2x+5)
\end{align*}
We note that $0$ is a zero of $p$ with multiplicity $2$. The other zeros of $p$
can be found by solving the equation
@@ -1154,7 +1154,7 @@
\begin{align*}
x & =\frac{2\pm\sqrt{(-2)^2}-20}{2(1)} \\
& =\frac{2\pm\sqrt{-16}}{2} \\
- & =1\pm 2i
+ & =1\pm 2i
\end{align*}
We conclude that $p$ has $4$ zeros: $0$ (multiplicity $2$), and $1\pm 2i$ (simple).
\end{pccsolution}
@@ -1169,13 +1169,13 @@
We know that the zeros of a polynomial can be found by analyzing the linear
factors. We are given the zeros, and have to work backwards to find the
linear factors.
-
+
We begin by assuming that $p$ has the form
\begin{align*}
p(x) & =(x-(2-i\sqrt{2}))(x-(2+i\sqrt{2})) \\
& =x^2-x(2+i\sqrt{2})-x(2-i\sqrt{2})+(2-i\sqrt{2})(2+i\sqrt{2}) \\
& =x^2-4x+(4-2i^2) \\
- & =x^2-4x+6
+ & =x^2-4x+6
\end{align*}
We conclude that a possible formula for a polynomial function, $p$,
that has zeros at $2\pm i\sqrt{2}$ is
@@ -1235,8 +1235,8 @@
\end{enumerate}
\end{shortsolution}
\end{problem}
-
-
+
+
\begin{figure}[!htb]
\setlength{\figurewidth}{0.3\textwidth}
\begin{subfigure}{\figurewidth}
@@ -1287,10 +1287,10 @@
\caption{}
\label{poly:fig:findformula}
\end{figure}
-
-
-
-
+
+
+
+
\begin{exercises}
%===================================
% Author: Hughes
@@ -1459,14 +1459,14 @@
\begin{align*}
p(x) & = (x-1)(x+2)(x-3) \\
m(x) & = -(x-1)(x+2)(x-3) \\
- n(x) & = (x-1)(x+2)(x-3)(x+1)(x+4)
+ n(x) & = (x-1)(x+2)(x-3)(x+1)(x+4)
\end{align*}
Note that for our present purposes we are not concerned with the vertical scale of the graphs.
\begin{subproblem}
Identify both on the graph {\em and} algebraically, the zeros of each polynomial.
\begin{shortsolution}
$y=p(x)$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-5,xmax=5,
@@ -1477,9 +1477,9 @@
\addplot[soldot] coordinates{(-2,0)(1,0)(3,0)};
\end{axis}
\end{tikzpicture}
-
+
$y=m(x)$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-5,xmax=5,
@@ -1490,9 +1490,9 @@
\addplot[soldot] coordinates{(-2,0)(1,0)(3,0)};
\end{axis}
\end{tikzpicture}
-
+
$y=n(x)$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-5,xmax=5,
@@ -1503,7 +1503,7 @@
\addplot[soldot] coordinates{(-4,0)(-2,0)(-1,0)(1,0)(3,0)};
\end{axis}
\end{tikzpicture}
-
+
The zeros of $p$ are $-2$, $1$, and $3$; the zeros of $m$ are $-2$, $1$, and $3$; the zeros of $n$ are
$-4$, $-2$, $-1$, and $3$.
\end{shortsolution}
@@ -1520,7 +1520,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -1773,7 +1773,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -1792,7 +1792,7 @@
$\dd\lim_{x\rightarrow\infty}s(x)=\infty$,
\end{shortsolution}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -1917,7 +1917,7 @@
is positive.
\begin{shortsolution}
Assuming that $a_3>0$:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -1937,7 +1937,7 @@
is negative.
\begin{shortsolution}
Assuming that $a_3<0$:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -1961,7 +1961,7 @@
coefficient of $q$ is positive. Hint: only one of the zeros is simple.
\begin{shortsolution}
Assuming that $a_4>0$ there are $2$ different options:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -1982,7 +1982,7 @@
coefficient of $q$ is negative.
\begin{shortsolution}
Assuming that $a_4<0$ there are $2$ different options:
-
+
\begin{tikzpicture}
\begin{axis}[
xmin=-10,xmax=10,
@@ -2194,7 +2194,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -2238,7 +2238,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -2290,7 +2290,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2298,7 +2298,7 @@
\begin{problem}[Find a formula from a table]\label{poly:prob:findformula}
\Crefrange{poly:tab:findformulap}{poly:tab:findformulas} show values of polynomial functions, $p$, $q$,
$r$, and $s$.
-
+
\begin{table}[!htb]
\centering
\begin{widepage}
@@ -2382,7 +2382,7 @@
\end{subtable}
\end{widepage}
\end{table}
-
+
\begin{subproblem}
Assuming that all of the zeros of $p$ are shown (in \cref{poly:tab:findformulap}), how many zeros does $p$ have?
\begin{shortsolution}
@@ -2433,7 +2433,7 @@
\end{subproblem}
\end{problem}
\end{exercises}
-
+
\section{Rational functions}
\subsection*{Power functions with negative exponents}
The study of rational functions will rely upon a good knowledge
@@ -2455,21 +2455,21 @@
the long-run behavior of each of the functions is the same, and in particular
\begin{align*}
f(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
\end{align*}
The same results hold for $g$ and $h$. Note also that each of the functions
has a \emph{vertical asymptote} at $0$. We see that
\begin{align*}
f(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} f(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} f(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same results hold for $g$ and $h$.
-
+
The curve of a function that has a vertical asymptote is necessarily separated
into \emph{branches}| each of the functions $f$, $g$, and $h$ have $2$ branches.
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htb]
\begin{minipage}{.45\textwidth}
\begin{tikzpicture}
@@ -2525,8 +2525,8 @@
\label{rat:fig:evenpow}
\end{minipage}%
\end{figure}
-
-
+
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2543,7 +2543,7 @@
the long-run behavior of each of the functions is the same, and in particular
\begin{align*}
F(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
- \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
+ \mathllap{\text{and }} f(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty
\end{align*}
As in \cref{rat:ex:oddpow}, $F$ has a horizontal asymptote that
has equation $y=0$.
@@ -2551,7 +2551,7 @@
has a \emph{vertical asymptote} at $0$. We see that
\begin{align*}
F(x)\rightarrow \infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} F(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} F(x)\rightarrow \infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same results hold for $G$ and $H$. Each of the functions $F$, $G$, and $H$
have $2$ branches.
@@ -2569,7 +2569,7 @@
\begin{shortsolution}
The functions $k$, $m$, and $n$ have domain $(-\infty,0)\cup (0,\infty)$, and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -2590,14 +2590,14 @@
\legend{$k$,$m$,$n$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
k(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
\mathllap{\text{and }} k(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty \\
\intertext{and also}
k(x)\rightarrow \infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} k(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} k(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same are true for $m$ and $n$.
\end{shortsolution}
@@ -2607,7 +2607,7 @@
\begin{shortsolution}
The functions $K$, $M$, and $N$ have domain $(-\infty,0)\cup (0,\infty)$, and
are graphed below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -2628,21 +2628,21 @@
\legend{$K$,$M$,$N$}
\end{axis}
\end{tikzpicture}
-
+
Note that
\begin{align*}
K(x)\rightarrow 0 & \text{ as } x\rightarrow\infty \\
\mathllap{\text{and }} K(x)\rightarrow 0 & \text{ as } x\rightarrow-\infty \\
\intertext{and also}
K(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^- \\
- \mathllap{\text{and }} K(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
+ \mathllap{\text{and }} K(x)\rightarrow -\infty & \text{ as } x\rightarrow 0^+
\end{align*}
The same are true for $M$ and $N$.
\end{shortsolution}
\end{subproblem}
\end{problem}
\end{doyouunderstand}
-
+
\subsection*{Rational functions}
\begin{pccdefinition}[Rational functions]\label{rat:def:function}
Rational functions have the form
@@ -2650,7 +2650,7 @@
r(x) = \frac{p(x)}{q(x)}
\]
where both $p$ and $q$ are polynomials.
-
+
Note that
\begin{itemize}
\item the domain or $r$ will be all real numbers, except those that
@@ -2658,13 +2658,13 @@
\item the zeros of $r$ are the zeros of $p$, i.e the real numbers
that make the \emph{numerator}, $p(x)$, equal to $0$.
\end{itemize}
-
+
\Cref{rat:ex:oddpow,rat:ex:evenpow} are particularly important because $r$
will behave like $\frac{1}{x}$, or $\frac{1}{x^2}$ around its vertical asymptotes,
depending on the power that the relevant term is raised to| we will demonstrate
this in what follows.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2699,7 +2699,7 @@
\end{enumerate}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2779,7 +2779,7 @@
\caption{}
\label{rat:fig:whichiswhich}
\end{figure}
-
+
\begin{pccsolution}
Let's start with the function $r$. Note that domain of $r$ is $(-\infty,3)\cup(0,3)$, so
we search for a function that has a vertical asymptote at $3$. There
@@ -2787,18 +2787,18 @@
but note that the function in \cref{rat:fig:which3} also has a vertical asymptote at $-2$
which is not consistent with the formula for $r(x)$. Therefore, $y=r(x)$
is graphed in \cref{rat:fig:which2}.
-
+
The function $q$ has domain $(-\infty,-5)\cup(-5,\infty)$, so we search
for a function that has a vertical asymptote at $-5$. The only candidate
is the curve shown in \cref{rat:fig:which1}; note that the curve also goes through $(2,0)$,
which is consistent with the formula for $q(x)$, since $q(2)=0$, i.e $q$
has a zero at $2$.
-
+
The function $k$ has domain $(-\infty,-2)\cup(-2,3)\cup(3,\infty)$, and
has vertical asymptotes at $-2$ and $3$. This is consistent with
the graph in \cref{rat:fig:which3} (and is the only curve that
has $3$ branches).
-
+
We note that each function behaves like $\frac{1}{x}$ around its vertical asymptotes,
because each linear factor in each denominator is raised to the power $1$; if (for example)
the definition of $r$ was instead
@@ -2809,7 +2809,7 @@
the graph of $r$ would be very different. We will deal with these cases in the examples that follow.
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -2827,7 +2827,7 @@
so we are not surprised to see that each curve has $3$ branches. We also note that
the numerator of each function is the same, which tells us that each function has
only $1$ zero at $2$.
-
+
The functions $g$ and $h$ are different from those that we have considered previously,
because they have a repeated factor in the denominator. Notice in particular
the way that the functions behave around their asymptotes:
@@ -2910,7 +2910,7 @@
\caption{}
\label{rat:fig:repfactd}
\end{figure}
-
+
\Cref{rat:def:function} says that the zeros of
the rational function $r$ that has formula $r(x)=\frac{p(x)}{q(x)}$ are
the zeros of $p$. Let's explore this a little more.
@@ -2929,9 +2929,9 @@
x+5=0
\]
The zero of $\alpha$ is $-5$.
-
+
Similarly, we may solve $9-x=0$ to find the zero of $\beta$, which is clearly $9$.
-
+
The zeros of $\gamma$ satisfy the equation
\[
17x^2-10=0
@@ -2943,7 +2943,7 @@
The zeros of $\gamma$ are $\pm\frac{10}{17}$.
\end{pccsolution}
\end{pccexample}
-
+
\subsection*{Long-run behavior}
Our focus so far has been on the behavior of rational functions around
their \emph{vertical} asymptotes. In fact, rational functions also
@@ -2966,7 +2966,7 @@
\end{pccdefinition}
We will concentrate on functions that have horizontal asymptotes until
we reach \cref{rat:sec:oblique}.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -2979,7 +2979,7 @@
and obtained the curves shown in \cref{rat:fig:horizasymp}. Kebede decides
to test his knowledgeable friend \pccname{Oscar}, and asks him
to match the formulas to the graphs.
-
+
\begin{figure}[!htb]
\setlength{\figurewidth}{0.3\textwidth}
\begin{subfigure}{\figurewidth}
@@ -3050,7 +3050,7 @@
\caption{Horizontal asymptotes}
\label{rat:fig:horizasymp}
\end{figure}
-
+
Oscar notices that each function has a vertical asymptote at $3$ and a zero at $-1$.
The main thing that catches Oscar's eye is that each function has a different
coefficient in the numerator, and that each curve has a different horizontal asymptote.
@@ -3064,14 +3064,14 @@
that since the degree of the numerator and the degree of the denominator is the same
for each of the functions $r$, $s$, and $t$, the horizontal asymptote will be determined
by evaluating the ratio of their leading coefficients.
-
+
Oscar therefore says that $r$ should have a horizontal asymptote $y=\frac{1}{1}=1$, $s$ should
have a horizontal asymptote $y=\frac{2}{1}=2$, and $t$ should have a horizontal asymptote
$y=\frac{3}{1}=3$. Kebede is able to finish the problem from here, and says that $r$ is
shown in \cref{rat:fig:horizasymp2}, $s$ is shown in \cref{rat:fig:horizasymp1}, and
$t$ is shown in \cref{rat:fig:horizasymp3}.
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -3080,7 +3080,7 @@
\pccname{Xiao} and \pccname{Dwayne} saw \cref{rat:ex:horizasymp} but are a little confused
about horizontal asymptotes. What does it mean to say that a function $r$ has a horizontal
asymptote?
-
+
They decide to explore the concept by
constructing a table of values for the rational functions $R$ and $S$ that have formulas
\[
@@ -3119,13 +3119,13 @@
\end{tabular}
\end{minipage}
\end{table}
-
+
Xiao and Dwayne study \cref{rat:tab:plusinfty,rat:tab:minusinfty} and decide that
the functions $R$ and $S$ never actually touch their horizontal asymptotes, but they
do get infinitely close. They also feel as if they have a better understanding of
what it means to study the behavior of a function as $x\rightarrow\pm\infty$.
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -3142,7 +3142,7 @@
\]
We also notice that the numerators of each function are quite similar| indeed, each
function has a zero at $2$, but how does each function behave around their zero?
-
+
Using \cref{rat:fig:repfactn} to guide us, we note that
\begin{itemize}
\item $f$ has a horizontal intercept $(2,0)$, but the curve of
@@ -3152,7 +3152,7 @@
\item $h$ has a horizontal intercept $(2,0)$, and the curve of $h$
also cuts the axis, but appears flattened as it does so.
\end{itemize}
-
+
We can further enrich our study by discussing the long-run behavior of each function.
Using the tools of \cref{rat:def:longrun}, we can deduce that
\begin{itemize}
@@ -3162,7 +3162,7 @@
study this more in \cref{rat:sec:oblique}).
\end{itemize}
\end{pccexample}
-
+
\begin{figure}[!htb]
\setlength{\figurewidth}{0.3\textwidth}
\begin{subfigure}{\figurewidth}
@@ -3235,7 +3235,7 @@
\caption{}
\label{rat:fig:repfactn}
\end{figure}
-
+
\subsection*{Holes}
Rational functions have a vertical asymptote at $a$ if the denominator is $0$ at $a$.
What happens if the numerator is $0$ at the same place? In this case, we say that the rational
@@ -3250,7 +3250,7 @@
$(a,r(a))$ on the curve $y=r(x)$ by
using a hollow circle, $\circ$.
\end{pccdefinition}
-
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -3262,12 +3262,12 @@
\]
in their calculators, and can not decide if the correct graph
is \cref{rat:fig:hole} or \cref{rat:fig:hole1}.
-
+
Luckily for them, Oscar is nearby, and can help them settle the debate.
Oscar demonstrates that
\begin{align*}
r(x) & =\frac{(x+3)(x-2)}{(x-2)} \\
- & = x+3
+ & = x+3
\end{align*}
but only when $x\ne 2$, because the function is undefined at $2$. Oscar
says that this necessarily means that the domain or $r$ is
@@ -3275,7 +3275,7 @@
(-\infty,2)\cup(2,\infty)
\]
and that $r$ must have a hole at $2$.
-
+
Mohammed and Sue are very grateful for the clarification, and conclude that
the graph of $r$ is shown in \cref{rat:fig:hole1}.
\begin{figure}[!htb]
@@ -3319,7 +3319,7 @@
\end{minipage}%
\end{figure}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -3333,12 +3333,12 @@
make the denominator equal to $0$. Notice that
\begin{align*}
f(x) & = \frac{x(x+3)}{x(x-4)} \\
- & = \frac{x+3}{x-4}
+ & = \frac{x+3}{x-4}
\end{align*}
provided that $x\ne 0$. Since $0$ makes the numerator
and the denominator 0 at the same time, we say that $f$ has a hole at $(0,-\nicefrac{3}{4})$.
Note that this necessarily means that $f$ does not have a vertical intercept.
-
+
We also note $f$ has a vertical asymptote at $4$; the function is graphed in \cref{rat:fig:holeex}.
\begin{figure}[!htb]
\centering
@@ -3362,9 +3362,9 @@
\label{rat:fig:holeex}
\end{figure}
\end{pccexample}
-
-
-
+
+
+
%===================================
% Author: Hughes
% Date: March 2012
@@ -3374,7 +3374,7 @@
if a rational function has a vertical asymptote, then it can
not possibly have local minimums and maximums, nor can it have
global minimums and maximums.
-
+
Trang says this statement is not always true. She plots the functions
$f$ and $g$ that have formulas
\[
@@ -3383,7 +3383,7 @@
in \cref{rat:fig:minmax1,rat:fig:minmax2} and shows them to Seamus. On seeing the graphs,
Seamus quickly corrects himself, and says that $f$ has a local (and global)
maximum of $2$ at $0$, and that $g$ has a local (and global) minimum of $-2$ at $0$.
-
+
\begin{figure}[!htb]
\begin{minipage}{.45\textwidth}
\begin{tikzpicture}[/pgf/declare function={f=-32*(x-1)*(x+1)/(( x-2)^2*(x+2)^2);}]
@@ -3427,19 +3427,19 @@
\label{rat:fig:minmax2}
\end{minipage}%
\end{figure}
-
+
Seamus also notes that (in its domain) the function $f$ is always concave down, and
that (in its domain) the function $g$ is always concave up. Furthermore, Trang
observes that each function behaves like $\frac{1}{x^2}$ around each of its vertical
asymptotes, because each linear factor in the denominator is raised to the power $2$.
-
+
\pccname{Oscar} stops by and reminds both students about the long-run behavior; according
to \cref{rat:def:longrun} since the degree of the denominator is greater than the
degree of the numerator (in both functions), each function has a horizontal asymptote
at $y=0$.
\end{pccexample}
-
-
+
+
\investigation*{}
%===================================
% Author: Pettit/Hughes
@@ -3448,12 +3448,12 @@
\begin{problem}[The spaghetti incident]
The same Queen from \vref{exp:prob:queenschessboard} has recovered from
the rice experiments, and has called her loyal jester for another challenge.
-
+
The jester has an $11-$inch piece of uncooked spaghetti that he puts on a table;
he uses a book to cover $\unit[1]{inch}$ of it so that
$\unit[10]{inches}$ hang over the edge. The jester then produces a box of $\unit{mg}$
weights that can be hung from the spaghetti.
-
+
The jester says it will take $\unit[y]{mg}$ to break the spaghetti when hung
$\unit[x]{inches}$ from the edge, according to the rule $y=\frac{100}{x}$.
\begin{margintable}
@@ -3537,7 +3537,7 @@
note that this necessarily means that you will not be able to plot all of the points.
\begin{shortsolution}
The graph of $y=\frac{100}{x}$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -3567,9 +3567,9 @@
\end{subproblem}
The Queen looks forward to more food-related investigations from her jester.
\end{problem}
-
-
-
+
+
+
%===================================
% Author: Adams (Hughes)
% Date: March 2012
@@ -3593,17 +3593,17 @@
Paying off the debt in $2$ years, we use
\begin{align*}
M & = \frac{2000\cdot 0.015}{1-(1+0.015)^{-24}} \\
- & \approx 99.85
+ & \approx 99.85
\end{align*}
The monthly payments are \$99.85.
-
+
Paying off the debt in $1$ year, we use
\begin{align*}
M & = \frac{2000\cdot 0.015}{1-(1+0.015)^{-12}} \\
- & \approx 183.36
+ & \approx 183.36
\end{align*}
The monthly payments are \$183.36
-
+
In the $2$-year model we would pay a total of $\$99.85\cdot 12=\$2396.40$. In the
$1$-year model we would pay a total of $\$183.36\cdot 12=\$2200.32$. We would therefore
save $\$196.08$ if we went with the $1$-year model instead of the $2$-year model.
@@ -3619,20 +3619,20 @@
For the $20$-year loan we use
\begin{align*}
M & = \frac{300000\cdot \frac{0.052}{12}}{1-\left( 1+\frac{0.052}{12} \right)^{-12\cdot 20}} \\
- & \approx 2013.16
+ & \approx 2013.16
\end{align*}
The monthly payments are \$2013.16.
-
+
For the $30$-year loan we use
\begin{align*}
M & = \frac{300000\cdot \frac{0.052}{12}}{1-\left( 1+\frac{0.052}{12} \right)^{-12\cdot 30}} \\
- & \approx 1647.33
+ & \approx 1647.33
\end{align*}
The monthly payments are \$1647.33.
-
+
The total amount paid during the $20$-year loan is $\$2013.16\cdot 12\cdot 20=\$483,158.40$.
The total amount paid during the $30$-year loan is $\$1647.33\cdot 12\cdot 30=\$593,038.80$.
-
+
Recommendation: if you can afford the payments, choose the $20$-year loan.
\end{shortsolution}
\end{subproblem}
@@ -3662,7 +3662,7 @@
This means that the monthly payments will be calculated using
\begin{align*}
M & = \frac{14000\cdot \frac{0.04}{12}}{1-\left( 1+\frac{0.04}{12} \right)^{-12\cdot 5}} \\
- & \approx 257.83
+ & \approx 257.83
\end{align*}
The monthly payments will be $\$257.83$. The total amount paid will be
$\$257.83\cdot 5\cdot 12=\$15,469.80$, of which $\$1469.80$ is interest.
@@ -3670,7 +3670,7 @@
This means that the monthly payments will be calculated using
\begin{align*}
M & = \frac{12000\cdot \frac{0.08}{12}}{1-\left( 1+\frac{0.08}{12} \right)^{-12\cdot 5}} \\
- & \approx 243.32
+ & \approx 243.32
\end{align*}
The monthly payments will be $\$243.32$. The total amount paid
will be $\$243.32\cdot 5\cdot 12 =\$14,599.20$, of which $\$2599.2$ is
@@ -3681,7 +3681,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
\begin{exercises}
%===================================
% Author: Hughes
@@ -3783,7 +3783,7 @@
$\begin{aligned}[t]
r(0) & =\frac{(0-2)(0+3)}{(0+5)(0-7)} \\
& =\frac{-6}{-35} \\
- & =\frac{6}{35}
+ & =\frac{6}{35}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3793,7 +3793,7 @@
$\begin{aligned}[t]
r(1) & =\frac{(1-2)(1+3)}{(1+5)(1-7)} \\
& =\frac{-4}{-36} \\
- & =\frac{1}{9}
+ & =\frac{1}{9}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3803,7 +3803,7 @@
$\begin{aligned}[t]
r(2) & =\frac{(2-2)(2+3)}{(2+5)(2-7)} \\
& = \frac{0}{-50} \\
- & =0
+ & =0
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3813,7 +3813,7 @@
$\begin{aligned}[t]
r(4) & =\frac{(4-2)(4+3)}{(4+5)(4-7)} \\
& =\frac{14}{-27} \\
- & =-\frac{14}{27}
+ & =-\frac{14}{27}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3822,9 +3822,9 @@
\begin{shortsolution}
$\begin{aligned}[t]
r(7) & =\frac{(7-2)(7+3)}{(7+5)(7-7)} \\
- & =\frac{50}{0}
+ & =\frac{50}{0}
\end{aligned}$
-
+
$r(7)$ is undefined.
\end{shortsolution}
\end{subproblem}
@@ -3834,7 +3834,7 @@
$\begin{aligned}[t]
r(-3) & =\frac{(-3-2)(-3+3)}{(-3+5)(-3-7)} \\
& =\frac{0}{-20} \\
- & =0
+ & =0
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3843,9 +3843,9 @@
\begin{shortsolution}
$\begin{aligned}[t]
r(-5) & =\frac{(-5-2)(-5+3)}{(-5+5)(-5-7)} \\
- & =\frac{14}{0}
+ & =\frac{14}{0}
\end{aligned}$
-
+
$r(-5)$ is undefined.
\end{shortsolution}
\end{subproblem}
@@ -3856,7 +3856,7 @@
r\left( \frac{1}{2} \right) & = \frac{\left( \frac{1}{2}-2 \right)\left( \frac{1}{2}+3 \right)}{\left( \frac{1}{2}+5 \right)\left( \frac{1}{2}-7 \right)} \\
& =\frac{-\frac{3}{2}\cdot\frac{7}{2}}{\frac{11}{2}\left( -\frac{13}{2} \right)} \\
& =\frac{-\frac{21}{4}}{-\frac{143}{4}} \\
- & =\frac{37}{143}
+ & =\frac{37}{143}
\end{aligned}$
\end{shortsolution}
\end{subproblem}
@@ -3908,7 +3908,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -3925,7 +3925,7 @@
\end{itemize}
\end{shortsolution}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -3997,7 +3997,7 @@
\label{rat:fig:findformula}
\end{widepage}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4034,7 +4034,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4099,7 +4099,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4181,7 +4181,7 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4212,7 +4212,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: Feb 2011
@@ -4265,8 +4265,8 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
-
+
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4309,7 +4309,7 @@
Sketch a graph of $r$.
\begin{shortsolution}
A graph of $r$ is shown below.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -4329,7 +4329,7 @@
\end{shortsolution}
\end{subproblem}
\end{problem}
-
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -4367,8 +4367,8 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
-
+
+
%===================================
% Author: Hughes
% Date: July 2012
@@ -4419,8 +4419,8 @@
\end{subproblem}
\end{multicols}
\end{problem}
-
-
+
+
%===================================
% Author: Hughes
% Date: May 2011
@@ -4428,7 +4428,7 @@
\begin{problem}[Find a formula from a table]\label{rat:prob:findformula}
\Crefrange{rat:tab:findformular}{rat:tab:findformulau} show values of rational functions $r$, $q$, $s$,
and $t$. Assume that any values marked with an X are undefined.
-
+
\begin{table}[!htb]
\begin{widepage}
\centering
@@ -4525,7 +4525,7 @@
r(-4) & = \frac{-4-3}{-4+2} \\
& = \frac{7}{2} \\
\end{aligned}$
-
+
$r(-3)=\ldots$ etc
\end{shortsolution}
\end{subproblem}
@@ -4541,9 +4541,9 @@
\begin{shortsolution}
$\begin{aligned}[t]
s(-4) & =\frac{-4+2}{(-4-3)(-4+1)} \\
- & =-\frac{2}{21}
+ & =-\frac{2}{21}
\end{aligned}$
-
+
$s(-3)=\ldots$ etc
\end{shortsolution}
\end{subproblem}
@@ -4563,13 +4563,13 @@
\end{subproblem}
\end{problem}
\end{exercises}
-
+
\section{Graphing rational functions (horizontal asymptotes)}
\reformatstepslist{R} % the steps list should be R1, R2, \ldots
We studied rational functions in the previous section, but were
not asked to graph them; in this section we will demonstrate the
steps to be followed in order to sketch graphs of the functions.
-
+
Remember from \vref{rat:def:function} that rational functions have
the form
\[
@@ -4583,7 +4583,7 @@
in this section \emph{will have a horizontal asymptote} (see \vref{rat:def:longrun}).
The cases in which the degree of $p$ is greater than the degree of $q$
is covered in the next section.
-
+
Before we begin, it is important to remember the following:
\begin{itemize}
\item Our sketches will give a good representation of the overall
@@ -4612,10 +4612,10 @@
find the exact coordinates of local minimums, local maximums, and points
of inflection.
\end{pccspecialcomment}
-
+
The examples that follow show how \crefrange{rat:step:first}{rat:step:last} can be
applied to a variety of different rational functions.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4641,7 +4641,7 @@
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4678,14 +4678,14 @@
\end{subfigure}%
\caption{$y=\dfrac{1}{x-2}$}
\end{figure}
-
+
The function $r$ in \cref{rat:ex:1overxminus2p2} has a horizontal asymptote which has equation $y=0$.
This asymptote lies on the horizontal axis, and you might (understandably) find it hard
to distinguish between the two lines (\cref{rat:fig:1overxminus2p2}). When faced
with such a situation, it is perfectly acceptable to draw the horizontal axis
as a dashed line| just make sure to label it correctly. We will demonstrate this
in the next example.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4711,12 +4711,12 @@
is, because we know what the overall shape will be. Let's compute $v(2)$
\begin{align*}
v(2) & =\dfrac{10}{2} \\
- & = 5
+ & = 5
\end{align*}
We therefore mark the point $(2,5)$ on \cref{rat:fig:1overxp2}, and then complete the sketch using
the details we found in the previous steps.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4760,7 +4760,7 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4778,7 +4778,7 @@
\begin{align*}
u(x) & =\frac{-4(x^2-9)}{x^2-8x+15} \\
& =\frac{-4(x+3)(x-3)}{(x-5)(x-3)} \\
- & =\frac{-4(x+3)}{x-5}
+ & =\frac{-4(x+3)}{x-5}
\end{align*}
provided that $x\ne 3$. Therefore $u$ has a vertical asymptote at $5$ and
a hole at $3$. The curve of $u$ has $2$ branches.
@@ -4788,7 +4788,7 @@
\item We put the details we have obtained so far on \cref{rat:fig:1overxminus2p1}. Notice
that there is only one way to complete the graph, which we have done in \cref{rat:fig:1overxminus2p2}.
\end{steps}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4833,12 +4833,12 @@
\end{figure}
\end{pccsolution}
\end{pccexample}
-
+
\Cref{rat:ex:1overxminus2p2,rat:ex:1overxp1,rat:ex:asympandholep1} have focused on functions
that only have one vertical asymptote; the remaining examples in this section
concern functions that have more than one vertical asymptote. We will demonstrate
that \crefrange{rat:step:first}{rat:step:last} still apply.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4862,20 +4862,20 @@
of the numerator and denominator, we say that $w$ has a horizontal
asymptote with equation $y=\frac{2}{1}=2$.
\item We put the details we have obtained so far on \cref{rat:fig:sketchtwoasymptp1}.
-
+
The function $w$ is a little more complicated than the functions that
we have considered in the previous examples because the curve has $3$
branches. When graphing such functions, it is generally a good idea to start with the branch
for which you have the most information| in this case, that is the \emph{middle} branch
on the interval $(-5,4)$.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
(because of our observations about the behavior of $w$ around its vertical asymptotes),
which we have done in \cref{rat:fig:sketchtwoasymptp2}.
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -4921,12 +4921,12 @@
\end{subfigure}%
\caption{$y=\dfrac{2(x+3)(x-5)}{(x+5)(x-4)}$}
\end{figure}
-
+
The rational functions that we have considered so far have had simple
factors in the denominator; each function has behaved like $\frac{1}{x}$
around each of its vertical asymptotes. \Cref{rat:ex:2asympnozeros,rat:ex:2squaredasymp}
consider functions that have a repeated factor in the denominator.
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -4949,17 +4949,17 @@
denominator of $f$ is $2$. $f$ has a horizontal asymptote with
equation $y=0$.
\item We put the details we have obtained so far on \cref{rat:fig:2asympnozerosp1}.
-
+
The function $f$ is similar to the function $w$ that we considered in \cref{rat:ex:sketchtwoasymp}|
it has two vertical asymptotes and $3$ branches, but in contrast to $w$ it does not have any zeros.
-
+
We sketch $f$ in \cref{rat:fig:2asympnozerosp2}, using the middle branch as our guide
because we have the most information about the function on the interval $(-5,4)$.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
because of our observations about the behavior of $f$ around its vertical asymptotes (it behaves like $\frac{1}{x}$),
which we have done in \cref{rat:fig:2asympnozerosp2}.
-
+
Note that we are not yet able to find the local minimum of $f$ algebraically on the interval $(-5,4)$,
so we make a reasonable guess as to where it is| we can be confident that it is above the horizontal axis
since $f$ has no zeros. You may think that this is unsatisfactory, but once we have the tools of calculus, we will
@@ -4967,7 +4967,7 @@
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -5011,7 +5011,7 @@
\end{subfigure}%
\caption{$y=\dfrac{100}{(x+5)(x-4)^2}$}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: May 2012
@@ -5037,19 +5037,19 @@
\cref{rat:fig:2squaredasymp1}. The function $g$ is similar to the functions
we considered in \cref{rat:ex:sketchtwoasymp,rat:ex:2asympnozeros} because
it has $2$ vertical asymptotes and $3$ branches.
-
+
We sketch $g$ using the middle branch as our guide because we have the most information
about $g$ on the interval $(-3,5)$. Note that there is no other way to draw this branch
without introducing other zeros which $g$ does not have.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
because of our observations about the behavior of $g$ around its vertical asymptotes| it
behaves like $\frac{1}{x^2}$.
-
+
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -5093,14 +5093,14 @@
\end{subfigure}%
\caption{$y=\dfrac{50(2-x)}{(x+3)^2(x-5)^2}$}
\end{figure}
-
+
Each of the rational functions that we have considered so far has had either
a \emph{simple} zero, or no zeros at all. Remember from our work on polynomial
functions, and particularly \vref{poly:def:multzero}, that a \emph{repeated} zero
corresponds to the curve of the function behaving differently at the zero
when compared to how the curve behaves at a simple zero. \Cref{rat:ex:doublezero} details a
function that has a non-simple zero.
-
+
%===================================
% Author: Hughes
% Date: June 2012
@@ -5127,20 +5127,20 @@
\cref{rat:fig:doublezerop1}. The function $h$ is different
from the functions that we have considered in previous examples because
of the multiplicity of the zero at $3$.
-
+
We sketch $h$ using the middle branch as our guide because we have the most information
about $h$ on the interval $(-4,6)$. Note that there is no other way to draw this branch
without introducing other zeros which $h$ does not have| also note how
the curve bounces off the horizontal axis at $3$.
-
+
Once we have drawn the middle branch, there is only one way to complete the graph
because of our observations about the behavior of $h$ around its vertical asymptotes| it
behaves like $\frac{1}{x}$.
-
+
\end{steps}
\end{pccsolution}
\end{pccexample}
-
+
\begin{figure}[!htbp]
\begin{subfigure}{.45\textwidth}
\begin{tikzpicture}
@@ -5199,7 +5199,7 @@
at $b$, and a vertical asymptote at $c$. Furthermore, these functions
behave like $\frac{1}{x}$ around their vertical asymptote, and the
curve of each function will have $2$ branches.
-
+
Katie has been working with $3$ functions that have the form given
in \cref{rat:eq:deducecurve}, and has followed \crefrange{rat:step:first}{rat:step:penultimate};
her results are shown in \cref{rat:fig:deducecurve}. There is just one
@@ -5207,7 +5207,7 @@
Help Katie finish each graph by deducing the curve of each function.
\begin{shortsolution}
\Vref{rat:fig:deducecurve1}
-
+
\begin{tikzpicture}[/pgf/declare function={f=3*(x+4)/(x+5);}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5222,9 +5222,9 @@
\addplot[pccplot] expression[domain=-4.76923:10,samples=50]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducecurve2}
-
+
\begin{tikzpicture}[/pgf/declare function={f=-3*(x-2)/(x-4);}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5239,9 +5239,9 @@
\addplot[pccplot] expression[domain=4.85714:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducecurve4}
-
+
\begin{tikzpicture}[/pgf/declare function={f=2*(x-6)/(x-4);}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5258,7 +5258,7 @@
\end{tikzpicture}
\end{shortsolution}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -5316,7 +5316,7 @@
\label{rat:fig:deducecurve}
\end{widepage}
\end{figure}
-
+
%===================================
% Author: Hughes
% Date: June 2012
@@ -5331,13 +5331,13 @@
at $b$ and $c$, and vertical asymptotes at $d$ and $e$. Furthermore,
these functions behave like $\frac{1}{x}$ around both vertical asymptotes,
and the curve of the function will have $3$ branches.
-
+
David has followed \crefrange{rat:step:first}{rat:step:penultimate} for
$3$ separate functions, and drawn the results in \cref{rat:fig:deducehard}.
Help David finish each graph by deducing the curve of each function.
\begin{shortsolution}
\Vref{rat:fig:deducehard1}
-
+
\begin{tikzpicture}[/pgf/declare function={f=(x-6)*(x+3)/( (x-4)*(x+1));}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5354,9 +5354,9 @@
\addplot[pccplot] expression[domain=4.24276:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducehard2}
-
+
\begin{tikzpicture}[/pgf/declare function={f=3*(x-2)*(x+3)/( (x-6)*(x+5));}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5373,9 +5373,9 @@
\addplot[pccplot] expression[domain=7.34324:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\Vref{rat:fig:deducehard3}
-
+
\begin{tikzpicture}[/pgf/declare function={f=2*(x-7)*(x+3)/( (x+6)*(x-5));}]
\begin{axis}[
xmin=-10,xmax=10,
@@ -5392,10 +5392,10 @@
\addplot[pccplot] expression[domain=5.25586:10]{f};
\end{axis}
\end{tikzpicture}
-
+
\end{shortsolution}
\end{problem}
-
+
\begin{figure}[!htb]
\begin{widepage}
\setlength{\figurewidth}{0.3\textwidth}
@@ -5470,7 +5470,7 @@
$y=\dfrac{4}{x+2}$
\begin{shortsolution}
Vertical intercept: $(0,2)$; vertical asymptote: $x=-2$, horizontal asymptote: $y=0$.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -5494,7 +5494,7 @@
Vertical intercept:$\left( 0,\frac{1}{9} \right)$;
horizontal intercept: $\left( \frac{1}{2},0 \right)$;
vertical asymptotes: $x=-3$, $x=3$, horizontal asymptote: $y=0$.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -5519,7 +5519,7 @@
\begin{shortsolution}
Vertical intercept $\left( 0,-\frac{3}{5} \right)$; horizontal
intercept: $(-3,0)$; vertical asymptote: $x=5$; horizontal asymptote: $y=1$.
-
+
\begin{tikzpicture}
\begin{axis}[
framed,
@@ -5544,7 +5544,7 @@
\begin{shortsolution}
Vertical intercept: $(0,-3)$; horizontal intercept: $\left( -\frac{3}{2},0 \right)$;
vertical asymptote: $x=\frac{1}{3}$, horizontal asymptote: $y=\frac{2}{3}$.
-
+
\begin{tikzpicture}[/pgf/declare function={f=(2*x+3)/(3*x-1);}]
\begin{axis}[
framed,
@@ -5568,7 +5568,7 @@
Vertical intercept: $\left( 0,-\frac{4}{9} \right)$;
horizontal intercepts: $(2,0)$, $(-2,0)$;
vertical asymptotes: $x=-3$, $x=3$; horizontal asymptote: $y=-1$.
-
+
\begin{tikzpicture}[/pgf/declare function={f=(4-x^2)/(x^2-9);}]
\begin{axis}[
framed,
@@ -5594,7 +5594,7 @@
Vertical intercept: $\left( 0,\frac{4}{5} \right)$;
horizontal intercepts: $\left( -\frac{5}{4},0 \right)$, $\left( \frac{4}{3},0 \right)$;
vertical asymptotes: $x=-\frac{5}{2}$, $x=5$; horizontal asymptote: $y=6$.
-
+
\begin{tikzpicture}[/pgf/declare function={f=(4*x+5)*(3*x-4)/((2*x+5)*(x-5));}]
\begin{axis}[
framed,
@@ -5724,7 +5724,7 @@
R(x)=
\begin{dcases}
\frac{2}{x+3}, & x<-5 \\
- \frac{x-4}{x-10}, & x\geq -5
+ \frac{x-4}{x-10}, & x\geq -5
\end{dcases}
\]
Evaluate each of the following.
@@ -5762,7 +5762,7 @@
\end{subproblem}
\end{problem}
\end{exercises}
-
+
\section{Graphing rational functions (oblique asymptotes)}\label{rat:sec:oblique}
\begin{subproblem}
$y=\dfrac{x^2+1}{x-4}$
@@ -5771,7 +5771,7 @@
\item $\left( 0,-\frac{1}{4} \right)$
\item Vertical asymptote: $x=4$.
\item A graph of the function is shown below
-
+
\begin{tikzpicture}[/pgf/declare function={f=(x^2+1)/(x-4);}]
\begin{axis}[
framed,
@@ -5798,7 +5798,7 @@
\item $(0,0)$, $(-3,0)$
\item Vertical asymptote: $x=5$, horizontal asymptote: none.
\item A graph of the function is shown below
-
+
\begin{tikzpicture}[/pgf/declare function={f=x^3*(x+3)/(x-5);}]
\begin{axis}[
framed,
diff --git a/Master/texmf-dist/doc/support/latexindent/success/stylefile.tex b/Master/texmf-dist/doc/support/latexindent/success/stylefile.tex
index 1fd497c1e2f..c7e3cce3730 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/stylefile.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/stylefile.tex
@@ -45,89 +45,91 @@ Another tabbing mechanism]\relax
\advance\CurrentLineWidth -2em
\advance\CurrentLineWidth -\displayindent
\advance\CurrentLineWidth -\leftskip
- \fi\fi
- \ifdim\CurrentLineWidth<\z@ \CurrentLineWidth\z@\fi
- % Enshrine the tab-to position; #1 might reference \CurrentLineWidth
- \@tempdimb=#1\relax
- \message{*** Tab to \the\@tempdimb, previous width is \the\CurrentLineWidth. ***}%
- % Save width for possible return use
- \xdef\TabPrevPos{\the\CurrentLineWidth}%
- % Build the action to perform
- \protected@xdef\TTo@action{%
- \vrule\@width\z@\@depth\the\prevdepth
- \ifdim\CurrentLineWidth>\@tempdimb
- \ifTTo@overlap\else
- \protect\newline \protect\null
- \fi\fi
- \protect\nobreak
- \protect\hskip\the\@tempdimb\relax
- }%
- %\message{\string\TTo@action: \meaning \TTo@action. }%
- % get back to the baseline, regardless of its depth.
- \vskip-\prevdepth
- \prevdepth-99\p@
- \vskip\prevdepth
- }}%
- $$
- % Don't count the display as lines in the paragraph
- \count@\prevgraf \advance\count@-4 \prevgraf\count@
- \TTo@action
- %% \penalty\@m % to allow a penalized line break
- \fi
- \endgroup
- \TTo@overlapfalse
- \ignorespaces
+ \fi
\fi
- }
+ \ifdim\CurrentLineWidth<\z@ \CurrentLineWidth\z@\fi
+ % Enshrine the tab-to position; #1 might reference \CurrentLineWidth
+ \@tempdimb=#1\relax
+ \message{*** Tab to \the\@tempdimb, previous width is \the\CurrentLineWidth. ***}%
+ % Save width for possible return use
+ \xdef\TabPrevPos{\the\CurrentLineWidth}%
+ % Build the action to perform
+ \protected@xdef\TTo@action{%
+ \vrule\@width\z@\@depth\the\prevdepth
+ \ifdim\CurrentLineWidth>\@tempdimb
+ \ifTTo@overlap\else
+ \protect\newline \protect\null
+ \fi
+ \fi
+ \protect\nobreak
+ \protect\hskip\the\@tempdimb\relax
+ }%
+ %\message{\string\TTo@action: \meaning \TTo@action. }%
+ % get back to the baseline, regardless of its depth.
+ \vskip-\prevdepth
+ \prevdepth-99\p@
+ \vskip\prevdepth
+ }}%
+ $$
+ % Don't count the display as lines in the paragraph
+ \count@\prevgraf \advance\count@-4 \prevgraf\count@
+ \TTo@action
+ %% \penalty\@m % to allow a penalized line break
+ \fi
+ \endgroup
+ \TTo@overlapfalse
+ \ignorespaces
+ \fi
+}
- % \tab -- to the next position
- % \hskip so \tab\tab moves two positions
- % Allow a (penalized but flexible) line-break right after the tab.
- %
- \newcommand\tab{\leavevmode\hskip2sp\tabto{\NextTabStop}%
- \nobreak\hskip\z@\@plus 30\p@\penalty4000\hskip\z@\@plus-30\p@\relax}
+% \tab -- to the next position
+% \hskip so \tab\tab moves two positions
+% Allow a (penalized but flexible) line-break right after the tab.
+%
+\newcommand\tab{\leavevmode\hskip2sp\tabto{\NextTabStop}%
+ \nobreak\hskip\z@\@plus 30\p@\penalty4000\hskip\z@\@plus-30\p@\relax}
- % Expandable macro to select the next tab position from the list
+% Expandable macro to select the next tab position from the list
- \newcommand\NextTabStop{%
- \expandafter \TTo@nexttabstop \TabStopList,\maxdimen,>%
- }
+\newcommand\NextTabStop{%
+ \expandafter \TTo@nexttabstop \TabStopList,\maxdimen,>%
+}
- \def\TTo@nexttabstop #1,{%
- \ifdim#1<\CurrentLineWidth
- \expandafter\TTo@nexttabstop
- \else
- \ifdim#1<0.9999\linewidth#1\else\z@\fi
- \expandafter\strip@prefix
- \fi
- }
- \def\TTo@foundtabstop#1>{}
+\def\TTo@nexttabstop #1,{%
+ \ifdim#1<\CurrentLineWidth
+ \expandafter\TTo@nexttabstop
+ \else
+ \ifdim#1<0.9999\linewidth#1\else\z@\fi
+ \expandafter\strip@prefix
+ \fi
+}
+\def\TTo@foundtabstop#1>{}
- \newcommand\TabPositions[1]{\def\TabStopList{\z@,#1}}
+\newcommand\TabPositions[1]{\def\TabStopList{\z@,#1}}
- \newcommand\NumTabs[1]{%
- \def\TabStopList{}%
- \@tempdimb\linewidth
- \divide\@tempdimb by#1\relax
- \advance\@tempdimb 1sp % counteract rounding-down by \divide
- \CurrentLineWidth\z@
- \@whiledim\CurrentLineWidth<\linewidth\do {%
- \edef\TabStopList{\TabStopList\the\CurrentLineWidth,}%
- \advance\CurrentLineWidth\@tempdimb
- }%
- \edef\TabStopList{\TabStopList\linewidth}%
- }
+\newcommand\NumTabs[1]{%
+ \def\TabStopList{}%
+ \@tempdimb\linewidth
+ \divide\@tempdimb by#1\relax
+ \advance\@tempdimb 1sp % counteract rounding-down by \divide
+ \CurrentLineWidth\z@
+ \@whiledim\CurrentLineWidth<\linewidth\do {%
+ \edef\TabStopList{\TabStopList\the\CurrentLineWidth,}%
+ \advance\CurrentLineWidth\@tempdimb
+ }%
+ \edef\TabStopList{\TabStopList\linewidth}%
+}
- % default setting of tab positions:
- \TabPositions{\parindent,.5\linewidth}
+% default setting of tab positions:
+\TabPositions{\parindent,.5\linewidth}
- \newif\ifTTo@overlap \TTo@overlapfalse
+\newif\ifTTo@overlap \TTo@overlapfalse
- \@ifundefined{predisplaydirection}{
- \let\TTo@Direction\predisplaysize
- \let\predisplaydirection\@undefined
- }
- {
- \let\TTo@Direction\predisplaydirection
- }
+\@ifundefined{predisplaydirection}{
+ \let\TTo@Direction\predisplaysize
+ \let\predisplaydirection\@undefined
+}
+{
+ \let\TTo@Direction\predisplaydirection
+}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/table4.tex b/Master/texmf-dist/doc/support/latexindent/success/table4.tex
new file mode 100644
index 00000000000..6f6e71323ce
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/table4.tex
@@ -0,0 +1,22 @@
+% arara: indent: {overwrite: true, silent: on, localSettings: on}
+\documentclass{article}
+\usepackage{siunitx}
+
+\begin{document}
+\begin{tabular}{%
+ l
+ S[table-format=3.0]
+ S[table-format=3.2]
+ S[table-format=2.2]
+ S[table-format=3.2]
+ S[table-format=-2.2]
+ S[table-format=3.2]
+ }
+ Latex & 360 & 101.77 & 10.71 & 101.86 & 64.60 & 127.20 \\
+ Manufacturing & 360 & -7.33 & 12.59 & -7.24 & -49.00 & 22.00 \\
+ Cons & 360 & -17.19 & 23.4 & -17.22 & -79.00 & 43.00 \\
+ Apple and Orange & 360 & 3.38 & 13.84 & 3.60 & -47.00 & 29.00 \\
+ Services and Harry & 104 & -4.96 & 20.8 & -4.81 & -57.00 & 30.00 \\
+ Manchester & 360 & -9.29 & 8.64 & -9.26 & -35.00 & 8.00 \\
+\end{tabular}
+\end{document}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/table5.tex b/Master/texmf-dist/doc/support/latexindent/success/table5.tex
new file mode 100644
index 00000000000..e2750f40d78
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/table5.tex
@@ -0,0 +1,35 @@
+\documentclass{article}
+
+\begin{document}
+
+\begin{tabular}{M|MMMMMMMMM}
+ & A_1 & A_2 & A_3 & A_4 & A_5 & A_6 & A_7 & A_8 & A_9 \\\hline
+ A_1 & 0 & & & & & & & & \\
+ A_2 & & 0 & & & & & & & \\
+ A_3 & & & 0 & & & & & & \\
+ A_4 & & & & 0 & & & & & \\
+ A_5 & & & & & 0 & & & & \\
+ A_6 & & & & & & 0 & & & \\
+ A_7 & & & & & & & 0 & & \\
+ A_8 & & & & & & & & 0 & \\
+ A_9 & & & & & & & & & 0 \\
+\end{tabular}
+\begin{tabularx}{M|MMMMMMMMM}
+ & A_1 & A_2 & A_3 & A_4 & A_5 & A_6 & A_7 & A_8 & A_9 \\\hline
+ A_1 & 0 & & & & & & & & \\
+ A_2 & & 0 & & & & & & & \\
+ A_3 & & & 0 & & & & & & \\
+ A_4 & & & & 0 & & & & & \\
+ A_5 & & & & & 0 & & & & \\
+ A_6 & & & & & & 0 & & & \\
+ A_7 & & & & & & & 0 & & \\
+ A_8 & & & & & & & & 0 & \\
+ A_9 & & & & & & & & & 0 \\
+\end{tabularx}
+\begin{align*}
+ CCI_n & = \frac{p_n-SMA(p_n)}{0.015 \cdot \sigma(p_n)}\\
+ \textrm{wobei} & n = \textrm{Perioden, i.\,d.\,R. 20};\p_n = \textrm{Typischer Preis/Kurs};\ SMA(p_n) = \textrm{SMA der typischen Preise};\\
+ & \sigma(p_n) = \textrm{Standardabweichung}\\
+\end{align*}
+\end{document}
+
diff --git a/Master/texmf-dist/doc/support/latexindent/success/testHeadings-simple.tex b/Master/texmf-dist/doc/support/latexindent/success/testHeadings-simple.tex
new file mode 100644
index 00000000000..565157dcaca
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/testHeadings-simple.tex
@@ -0,0 +1,56 @@
+% arara: indent: {onlyDefault: no, overwrite: true, trace: on, silent: yes, localSettings: true}
+\part{part}
+ part text
+ part text
+ \chapter{chapter long title}
+ chapter text
+ chapter text
+ \section[for the toc]{section}
+ section text
+ section text
+ \section[for the toc]{section}
+ section text
+ section text
+ \subsection[for the toc]{subsection}
+ subsection text
+ subsection text
+ \subsection[for the toc]{subsection}
+ subsection text
+ subsection text
+ \section[for the toc]{section}
+ section text
+ section text
+ \chapter{chapter}
+ chapter text
+ chapter text
+\part{part}
+ part text
+ part text
+ \chapter[toc]{chapter title}
+ chapter text
+ chapter text
+ \section[for the toc]{section}
+ section text
+ section text
+ \subsubsection[for the toc]{subsubsection}
+ subsubsection text
+ subsubsection text
+ \paragraph{paragraph}
+ paragraph text
+ paragraph text
+ \subparagraph{subparagraph}
+ subparagraph text
+ subparagraph text
+ \section[for the toc]{section}
+ section text
+ section text
+ \subsubsection[for the toc]{subsubsection}
+ subsubsection text
+ subsubsection text
+ \paragraph{paragraph}
+ paragraph text
+ paragraph text
+ \subparagraph{subparagraph}
+ subparagraph text
+ subparagraph text
+ \chapter[somethingelse]{goes here}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/testItems.tex b/Master/texmf-dist/doc/support/latexindent/success/testItems.tex
index 32e153eb19a..fba97784548 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/testItems.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/testItems.tex
@@ -70,7 +70,7 @@ regular text
some other stuff
% here's a comment
\end{list}
-
+
\item some text some text
some text some text
some text some text
diff --git a/Master/texmf-dist/doc/support/latexindent/success/testcls.cls b/Master/texmf-dist/doc/support/latexindent/success/testcls.cls
index 8b0d1a0e73a..d4c23660c5a 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/testcls.cls
+++ b/Master/texmf-dist/doc/support/latexindent/success/testcls.cls
@@ -187,12 +187,14 @@
% - Page break after
% - TODO: couldn't get pdfbookmark to point to this page instead of the
% first page so it was removed.
+%\begin{noindent}
\xpretocmd{\tableofcontents}{%
\begin{singlespace}}{}{}
- \xapptocmd{\tableofcontents}{%
- \end{singlespace}%
- \pagestyle{plain}%
- \clearpage}{}{}
+\xapptocmd{\tableofcontents}{%
+\end{singlespace}%
+\pagestyle{plain}%
+\clearpage}{}{}
+%\end{noindent}
% - Add dot leader for chapter levels
\renewcommand\cftchapdotsep{\cftdotsep}
@@ -201,23 +203,23 @@
% - Adjust indentation of levels
% - Capitalize title entries, if requested
\if@isu@capstoc
-\renewcommand\cftchappresnum{\MakeUppercase{\chaptertitlename} }
-\cftsetindents{chapter}{0em}{8em}
-\cftsetindents{section}{2em}{0em}
-\cftsetindents{subsection}{3em}{0em}
-\renewcommand{\cftchapfont}{\MakeUppercase}
+ \renewcommand\cftchappresnum{\MakeUppercase{\chaptertitlename} }
+ \cftsetindents{chapter}{0em}{8em}
+ \cftsetindents{section}{2em}{0em}
+ \cftsetindents{subsection}{3em}{0em}
+ \renewcommand{\cftchapfont}{\MakeUppercase}
\else
-\renewcommand\cftchappresnum{\chaptertitlename\ }
-\cftsetindents{chapter}{0em}{6em}
-\cftsetindents{section}{1em}{0em}
-\cftsetindents{subsection}{2em}{0em}
+ \renewcommand\cftchappresnum{\chaptertitlename\ }
+ \cftsetindents{chapter}{0em}{6em}
+ \cftsetindents{section}{1em}{0em}
+ \cftsetindents{subsection}{2em}{0em}
\fi
% - Remove section/subsection numbers from ToC by capturing
% see idea at http://tex.stackexchange.com/questions/71123/remove-section-number-toc-entries-with-tocloft
\if@isu@tocnumbersections@\else
-\renewcommand{\cftsecpresnum}{\begin{lrbox}{\@tempboxa}}
-\renewcommand{\cftsecaftersnum}{\end{lrbox}}
+ \renewcommand{\cftsecpresnum}{\begin{lrbox}{\@tempboxa}}
+ \renewcommand{\cftsecaftersnum}{\end{lrbox}}
\fi
\if@isu@tocnumbersubsections@\else
@@ -229,10 +231,12 @@
% List of Figures:
% - Single space
% - Page break after
+%\begin{noindent}
\xpretocmd{\listoffigures}{%
- \begin{singlespace}}{}{}
- \xapptocmd{\listoffigures}{%
- \end{singlespace}\clearpage}{}{}
+\begin{singlespace}}{}{}
+\xapptocmd{\listoffigures}{%
+\end{singlespace}\clearpage}{}{}
+%\end{noindent}
% - Prepend the word "Figure" to the number
\renewcommand\cftfigpresnum{Figure }
@@ -242,10 +246,12 @@
% List of Tables:
% - Single space
% - Page break after
+%\begin{noindent}
\xpretocmd{\listoftables}{%
\begin{singlespace}}{}{}
- \xapptocmd{\listoftables}{%
- \end{singlespace}\clearpage}{}{}
+\xapptocmd{\listoftables}{%
+ \end{singlespace}\clearpage}{}{}
+%\end{noindent}
% - Prepend the word "Table" to the number
\renewcommand\cfttabpresnum{Table }
@@ -279,13 +285,13 @@
% Verify that we actually got some main matter
\AfterEndDocument{
\if@isu@errormissingmainmatter@
- \ifdefined\@isu@gottitle
- \ClassInfo{\@isu@classname}{Full dissertation mode}
- \unless\ifdefined\@isu@gotmainmatter@
- \ClassError{\@isu@classname}{Missing \protect\mainmatter\space before your first real chapter!}{Missing mainmatter}
- % \ClassError{\@isu@classname}{%
- % \protect\mainmatter\space not called in your document expected before your first real chapter}{%
- % You need to put \protect\mainmatter\space before your first real numbered chapter, typically your introduction.}
+ \ifdefined\@isu@gottitle
+ \ClassInfo{\@isu@classname}{Full dissertation mode}
+ \unless\ifdefined\@isu@gotmainmatter@
+ \ClassError{\@isu@classname}{Missing \protect\mainmatter\space before your first real chapter!}{Missing mainmatter}
+ % \ClassError{\@isu@classname}{%
+ % \protect\mainmatter\space not called in your document expected before your first real chapter}{%
+ % You need to put \protect\mainmatter\space before your first real numbered chapter, typically your introduction.}
\fi
\fi
\fi
@@ -318,13 +324,13 @@ All rights reserved.}
\renewcommand{\maketitle}{
\newcommand{\@isu@gottitle}{} % Assume that \maketitle implies typesetting a full thesis, not just a chapter.
\ClassInfo{\@isu@classname}{Generating title page -- assuming we are typesetting a full dissertation.}
-
+
\begin{titlepage}
\setlength{\parindent}{0pt} % Don't you dare try to indent!
\vbox to \textheight{ % Full-page box to contain everything and stretch everything.
\begin{center} % Center this whole page
\vspace*{12pt} % Designated blank line at the top of the page.
-
+
\begin{singlespace} % Single-space this section, we manually add spacing.
\textbf{\@title}\\ % Title in bold
\@isu@maketwoblanklines % "two blank lines"
@@ -332,34 +338,34 @@ All rights reserved.}
\@isu@maketwoblanklines % "two blank lines"
\textbf{\@author} % Author in bold
\end{singlespace}
-
+
\vfill{} % let LaTeX decide what "4-6 blank lines" should be.
-
+
\begin{\isu@space} % Normal document spacing here.
A \isu@submissiontype\ submitted to the graduate faculty\\
in partial fulfillment of the requirements of the degree of\\
\MakeUppercase{\isu@degree} % Doctor of Philosophy, etc. We enforce caps so they don't have to.
\end{\isu@space}
-
+
\@isu@maketwoblanklines % "two blank lines"
-
+
\begin{singlespace} % Committee is single-spaced, looks like really long majors would be too.
\isu@majorline\\ % "Major: MAJ (CONC)" or "Co-majors: MAJ; MAJ;
\medskip % Unspecified space here, looks like just "one blank line" on sample
Program of Study Committee:\\
\isu@committee % Committee, user-delimited with \\ and user-annoted with ", Major Professor" or "Co-major Professor"
\end{singlespace}
-
+
\vfill{} % let LaTeX decide what "7-8 blank lines" should be.
\@isu@maketwoblanklines % Suggest it's a little longer than the other vfill.
-
+
\begin{\isu@space} % Normal document spacing here
Iowa State University\\
Ames, Iowa\\
\isu@gradyear % Newline after here, if needed, is in the copyright notice macro.
\isu@copyrightnotice % Copyright line optional if copyright not formally filed.
\end{\isu@space}
-
+
\end{center}
}
\end{titlepage}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/theorem.tex b/Master/texmf-dist/doc/support/latexindent/success/theorem.tex
index dcf9fe05a23..6541ed31ceb 100644
--- a/Master/texmf-dist/doc/support/latexindent/success/theorem.tex
+++ b/Master/texmf-dist/doc/support/latexindent/success/theorem.tex
@@ -32,7 +32,7 @@
\begin{document}
\section{Introduction}
Lorem ipsum sed nulla id risus adipiscing vulputate.
-
+
\begin{example}
Um consumidor financiou a compra de um veículo pagando 48 parcelas de \$800,00 mensais e a taxa de juros cobrada pela concessionária foi de 1,2\% a.m.. Qual era o valor à vista do automóvel adquirido?
\newline
@@ -42,6 +42,6 @@
PV = 800 \times \left[ \dfrac{0,772820}{0,021274} \right] \newline
PV = \$29.061,79$
\end{example}
-
+
Lorem ipsum sed nulla id risus adipiscing vulputate.
\end{document}
diff --git a/Master/texmf-dist/doc/support/latexindent/success/verbatim1.tex b/Master/texmf-dist/doc/support/latexindent/success/verbatim1.tex
new file mode 100644
index 00000000000..635192051f2
--- /dev/null
+++ b/Master/texmf-dist/doc/support/latexindent/success/verbatim1.tex
@@ -0,0 +1,21 @@
+% arara: indent: {overwrite: true, silent: on}
+\documentclass{article}
+
+\begin{document}
+\begin{verbatim}{%
+ l
+ S[table-format=3.0]
+ S[table-format=3.2]
+ S[table-format=2.2]
+ S[table-format=3.2]
+ S[table-format=-2.2]
+ S[table-format=3.2]
+ }
+ Latex & 360 & 101.77 & 10.71 & 101.86 & 64.60 & 127.20 \\
+Manufacturing & 360 & -7.33 & 12.59 & -7.24 & -49.00 & 22.00 \\
+ Cons & 360 & -17.19 & 23.4 & -17.22 & -79.00 & 43.00 \\
+ Apple and Orange & 360 & 3.38 & 13.84 & 3.60 & -47.00 & 29.00 \\
+ Services and Harry & 104 & -4.96 & 20.8 & -4.81 & -57.00 & 30.00 \\
+ Manchester & 360 & -9.29 & 8.64 & -9.26 & -35.00 & 8.00 \\
+\end{verbatim}
+\end{document}