rm Thumbs.db and *.bak per CTAN, from PauloC

git-svn-id: svn://tug.org/texlive/trunk@68678 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 0 insertions, 482 deletions

diff --git a/Master/texmf-dist/doc/latex/latex-course/Graphics/Thumbs.db b/Master/texmf-dist/doc/latex/latex-course/Graphics/Thumbs.db
deleted file mode 100644
index ba1cd463945..00000000000
--- a/Master/texmf-dist/doc/latex/latex-course/Graphics/Thumbs.db
+++ /dev/null
diff --git a/Master/texmf-dist/doc/latex/unamth-template/Latex/Classes/PhDthesisPSnPDF.cls.bak b/Master/texmf-dist/doc/latex/unamth-template/Latex/Classes/PhDthesisPSnPDF.cls.bak
deleted file mode 100644
index d076c3d49bd..00000000000
--- a/Master/texmf-dist/doc/latex/unamth-template/Latex/Classes/PhDthesisPSnPDF.cls.bak
+++ /dev/null
@@ -1,409 +0,0 @@
-
-%---------------------------------------------------------------
-% PhDthesis version 2 style file by Jakob Suckale, 2007
-% based on CUEDthesis version 1 by Harish Bhanderi 2002
-%---------------------------------------------------------------
-
-
-
-%-------------------------- identification ---------------------
-%\NeedsTeXFormat{LaTeX2e}
-\ProvidesClass{Latex/Classes/PhDthesisPSnPDF}[2007/09/06 v2 PhD thesis class]
-
-
-%:-------------------------- report or book -----------------------
-
-%If you want to use a Report style document then uncomment the following 3 lines and comment the below 8 book style lines:
-%\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
-%\ProcessOptions\relax
-%%\LoadClass[a4paper]{report}
-%\ifx\pdfoutput\undefined
-%   \LoadClass[dvips, a4paper]{report}
-%\else
-%   \LoadClass[pdftex, a4paper]{report}
-%\fi
-
-%%Bibliography
-%%uncomment next line to change bibliography name to references for Report document class
-%\renewcommand{\refname}{References}
-
-%If you want to use a Book style document then uncomment the following 3 lines and comment the above 8 report style lines:
-\DeclareOption*{\PassOptionsToClass{\CurrentOption}{book}}
-\ProcessOptions\relax
-\ifx\pdfoutput\undefined
-   \LoadClass[dvips, a4paper]{book}
-\else
-   \LoadClass[pdftex, a4paper]{book}
-\fi
-
-
-%:-------------------------- packages for fancy things -----------------------
-
-\usepackage{amssymb}
-\usepackage{graphics} % for improved inclusion of graphics
-%\usepackage{wrapfig} % to include figure with text wrapping around it
-\usepackage[margin=10pt,font=small,labelfont=bf]{caption} % for improved layout of figure captions with extra margin, smaller font than text
-\usepackage{fancyhdr} % for better header layout
-\usepackage{eucal}
-\usepackage[english]{babel}
-\usepackage[usenames, dvipsnames]{color}
-\usepackage[perpage]{footmisc}
-\usepackage[round, sort, numbers]{natbib}
-\usepackage{ifthen}
-\usepackage{multicol} % for pages with multiple text columns, e.g. References
-\setlength{\columnsep}{20pt} % space between columns; default 10pt quite narrow
-\usepackage[nottoc]{tocbibind} % correct page numbers for bib in TOC, nottoc suppresses an entry for TOC itself
-%\usepackage{nextpage}
-
-%:-------------------------- Glossary/Abbrev./Symbols -----------------------
-
-\usepackage[intoc]{nomencl} % load nomencl extension; include in TOC
-%\nomrefpage % to include page numbers after abbrevations
-\renewcommand{\nomname}{Glossary} % rename nomenclature
-\renewcommand{\nomlabel}[1]{\textbf{#1}} % make abbreviations bold
-\makenomenclature % used to be \makeglossary
-\newcommand{\g}{\footnote{For all abbreviations see the glossary on page \pageref{nom}.}} % type "\g" to refer to glossary
-
-% used to be for sorting into categories:
-%\renewcommand\nomgroup[1]{%
-%  \ifthenelse{\equal{#1}{A}}{%
-%   \item[\textbf{Roman Symbols}] }{%             A - Roman
-%    \ifthenelse{\equal{#1}{G}}{%
-%     \item[\textbf{Greek Symbols}]}{%             G - Greek
-%      \ifthenelse{\equal{#1}{R}}{%
-%        \item[\textbf{Superscripts}]}{%              R - Superscripts
-%          \ifthenelse{\equal{#1}{S}}{%
-%           \item[\textbf{Subscripts}]}{{%             S - Subscripts
-%	    \ifthenelse{\equal{#1}{X}}{%
-%	     \item[\textbf{Other Symbols}]}{{%    X - Other Symbols
-%	    \ifthenelse{\equal{#1}{Z}}{%
-%	     \item[\textbf{Acronyms}]}%              Z - Acronyms
-%              			{{}}}}}}}}}}
-
-
-%:-------------------------- PDF/PS setup -----------------------
-
-%if you use a macTeX 2008 or later, use the ifpdf package
-\usepackage{ifpdf} 
-
-%if you use an older version, uncomment these lines:
-%\newif \ifpdf
-%    \ifx \pdfoutput \undefined
-        % for running latex
-%        \pdffalse
-%    \else
-        % for running pdflatex
-%        \pdfoutput = 1    % positive value for a PDF output
-                          % otherwise a DVI
-%        \pdftrue
-%\fi
-
-\ifpdf
-%-->
-%--> Google.com search "hyperref options"
-%--> 
-%--> http://www.ai.mit.edu/lab/sysadmin/latex/documentation/latex/hyperref/manual.pdf
-%--> http://www.chemie.unibas.ch/~vogtp/LaTeX2PDFLaTeX.pdf 
-%--> http://www.uni-giessen.de/partosch/eurotex99/ oberdiek/print/sli4a4col.pdf
-%--> http://me.in-berlin.de/~miwie/tex-refs/html/latex-packages.html
-%-->
-    \usepackage[ pdftex, plainpages = false, pdfpagelabels, 
-                 pdfpagelayout = useoutlines,
-                 bookmarks,
-                 bookmarksopen = true,
-                 bookmarksnumbered = true,
-                 breaklinks = true,
-                 linktocpage,
-                 pagebackref,
-                 colorlinks = false,  % was true
-                 linkcolor = blue,
-                 urlcolor  = blue,
-                 citecolor = red,
-                 anchorcolor = green,
-                 hyperindex = true,
-                 hyperfigures
-                 ]{hyperref} 
-
-    \DeclareGraphicsExtensions{.png, .jpg, .jpeg, .pdf, .gif} %GIF doesn't work??
-    \usepackage[pdftex]{graphicx}
-    \pdfcompresslevel=9
-    \graphicspath{{0_frontmatter/figures/PNG/}{0_frontmatter/figures/PDF/}{0_frontmatter/figures/}}
-\else
-    \usepackage[ dvips, 
-                 bookmarks,
-                 bookmarksopen = true,
-                 bookmarksnumbered = true,
-                 breaklinks = true,
-                 linktocpage,
-                 pagebackref,
-                 colorlinks = true,
-                 linkcolor = blue,
-                 urlcolor  = blue,
-                 citecolor = red,
-                 anchorcolor = green,
-                 hyperindex = true,
-                 hyperfigures
-                 ]{hyperref}
-
-    \DeclareGraphicsExtensions{.eps, .ps}
-    \usepackage{epsfig}
-    \usepackage{graphicx}
-    \graphicspath{{0_frontmatter/figures/EPS/}{0_frontmatter/figures/}}
-\fi
-
-
-%:-------------------------- page layout -----------------------
-
-%A4 settings
-\ifpdf
-   \pdfpageheight=297mm
-   \pdfpagewidth=210mm
-\else
-   \setlength{\paperheight}{297mm}
-   \setlength{\paperwidth}{210mm}
-\fi
-
-\setlength{\hoffset}{0.00cm}
-\setlength{\voffset}{0.00cm}
-
-%: Uncomment this secion for two-sided printing
-% ------------------------------
-\setlength{\oddsidemargin}{1.5cm}
-\setlength{\evensidemargin}{0cm}
-\setlength{\topmargin}{1mm}
-\setlength{\headheight}{1.36cm}
-\setlength{\headsep}{1.00cm}
-\setlength{\textheight}{20.84cm}
-\setlength{\textwidth}{14.5cm}
-\setlength{\marginparsep}{1mm}
-\setlength{\marginparwidth}{3cm}
-\setlength{\footskip}{2.36cm}
-
-
-%: Uncomment this secion for one-sided printing
-% taken from the original file, but with the first two lanes modified
-% ------------------------------
-%\setlength{\evensidemargin}{1.9cm} % was 1.96cm in original
-%\setlength{\oddsidemargin}{-0.001cm} % was -0.54cm in original file
-%\setlength{\topmargin}{1mm}
-%\setlength{\headheight}{1.36cm}
-%\setlength{\headsep}{1.00cm}
-%\setlength{\textheight}{20.84cm}
-%\setlength{\textwidth}{14.5cm}
-%\setlength{\marginparsep}{1mm}
-%\setlength{\marginparwidth}{3cm}
-%\setlength{\footskip}{2.36cm}
-
-
-%: section below defines fancy page layout options
-% ------------------------------
-\pagestyle{fancy}
-\renewcommand{\chaptermark}[1]{\markboth{\MakeUppercase{\thechapter. #1 }}{}}
-\renewcommand{\sectionmark}[1]{\markright{\thesection\ #1}}
-\fancyhf{}
-\fancyhead[RO]{\bfseries\rightmark}
-\fancyhead[LE]{\bfseries\leftmark}
-\fancyfoot[C]{\thepage}
-\renewcommand{\headrulewidth}{0.5pt}
-\renewcommand{\footrulewidth}{0pt}
-\addtolength{\headheight}{0.5pt}
-\fancypagestyle{plain}{
-  \fancyhead{}
-  \renewcommand{\headrulewidth}{0pt}
-}
-
-
-
-
-
-%:-------------------------- title page layout -----------------------
-
-% starts roman page numbering until chapter 1
-% important to avoid two pages numbered 1 and 2 which may cause bad links
-% bug: cover i + back side ii and then numbering restarts with i; should be iii
-\renewcommand{\thepage}{\roman{page}}
-
-\newcommand{\submittedtext}{{A thesis submitted for the degree of}}
-
-% DECLARATIONS
-% These macros are used to declare arguments needed for the
-% construction of the title page and other preamble.
-
-% The year and term the degree will be officially conferred
-\def\degreedate#1{\gdef\@degreedate{#1}}
-% The full (unabbreviated) name of the degree
-\def\degree#1{\gdef\@degree{#1}}
-% The name of your college or department(eg. Trinity, Pembroke, Maths, Physics)
-\def\collegeordept#1{\gdef\@collegeordept{#1}}
-% The name of your University
-\def\university#1{\gdef\@university{#1}}
-% Defining the crest
-\def\crest#1{\gdef\@crest{#1}}
-% Stating the city of birth for title page where needed; uncommented for use
-%\def\cityofbirth#1{\gdef\@cityofbirth{#1}}
-
-% These macros define an environment for front matter that is always 
-% single column even in a double-column document.
-
-\newenvironment{alwayssingle}{%
-       \@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
-       \else\newpage\fi}
-       {\if@restonecol\twocolumn\else\newpage\fi}
-
-%define title page layout
-\renewcommand{\maketitle}{%
-\begin{alwayssingle}
-    \renewcommand{\footnotesize}{\small}
-    \renewcommand{\footnoterule}{\relax}
-    \thispagestyle{empty}
-%  \null\vfill
-  \begin{center}
-    { \Huge {\bfseries {\@title}} \par}
-{\large \vspace*{35mm} {{\@crest} \par} \vspace*{25mm}}
-    {{\Large \@author} \par}
-%	\vspace*{1ex}
-%	{{\@cityofbirth} \par}    
-{\large 
-	\vspace*{1ex}
-    {{\@collegeordept} \par}
-	\vspace*{1ex}
-    {{\@university} \par}
-	\vspace*{25mm}
-    {{\submittedtext} \par}
-	\vspace*{1ex}
-    {\it {\@degree} \par}
-	\vspace*{2ex}
-    {\@degreedate}
-}%end large
-  \end{center}
-  \null\vfill
-\end{alwayssingle}}
-
-% page number for cover back side should have page number blanked
-
-
-%:-------------------------- front matter layout -----------------------
-
-% DEDICATION
-%
-% The dedication environment makes sure the dedication gets its
-% own page and is set out in verse format.
-
-\newenvironment{dedication}
-{\begin{alwayssingle}
-  \pagestyle{empty}
-  \begin{center}
-  \vspace*{1.5cm}
-  {\LARGE }
-  \end{center}
-  \vspace{0.5cm}
-  \begin{quote} \begin{center}}
-{\end{center} \end{quote} \end{alwayssingle}}
-
-
-% ACKNOWLEDGEMENTS
-%
-% The acknowledgements environment puts a large, bold, centered 
-% "Acknowledgements" label at the top of the page. The acknowledgements
-% themselves appear in a quote environment, i.e. tabbed in at both sides, and
-% on its own page.
-
-\newenvironment{acknowledgements}
-{\pagestyle{empty}
-\begin{alwayssingle}
-\begin{center}
-\vspace*{1.5cm}
-{\Large \bfseries Acknowledgements}
-\end{center}
-\vspace{0.5cm}
-\begin{quote}}
-{\end{quote}\end{alwayssingle}}
-
-% The acknowledgementslong environment puts a large, bold, centered 
-% "Acknowledgements" label at the top of the page. The acknowledgement itself 
-% does not appears in a quote environment so you can get more in.
-
-\newenvironment{acknowledgementslong}
-{\pagestyle{empty}
-\begin{alwayssingle}
-\begin{center}
-\vspace*{1.5cm}
-{\Large \bfseries Acknowledgements}
-\end{center}
-\vspace{0.5cm}\begin{quote}}
-{\end{quote}\end{alwayssingle}}
-
-%ABSTRACT
-%
-%The abstract environment puts a large, bold, centered "Abstract" label at
-%the top of the page. The abstract itself appears in a quote environment,
-%i.e. tabbed in at both sides, and on its own page.
-
-\newenvironment{abstracts} {\begin{alwayssingle} \pagestyle{empty}
-  \begin{center}
-  \vspace*{1.5cm}
-  {\Large \bfseries  Abstract}
-  \end{center}
-  \vspace{0.5cm}
-   \begin{quote}}
-{\end{quote}\end{alwayssingle}}
-
-%The abstractlong environment puts a large, bold, centered "Abstract" label at
-%the top of the page. The abstract itself does not appears in a quote
-%environment so you can get more in.
-
-\newenvironment{abstractslong} {\begin{alwayssingle} \pagestyle{empty}
-  \begin{center}
-  \vspace*{1.5cm}
-  {\Large \bfseries  Abstract}
-  \end{center}
-  \vspace{0.5cm} \begin{quote}}
-{\end{quote}\end{alwayssingle}}
-
-%The abstractseparate environment is for running of a page with the abstract
-%on including title and author etc as required to be handed in separately
-
-\newenvironment{abstractseparate} {\begin{alwayssingle} \pagestyle{empty}
-  \vspace*{-1in}
- \begin{center}
-    { \Large {\bfseries {\@title}} \par}
-    {{\large \vspace*{1ex} \@author} \par}
-{\large \vspace*{1ex}
-    {{\@collegeordept} \par}
-    {{\@university} \par}
-\vspace*{1ex}
-    {{\it \submittedtext} \par}
-    {\it {\@degree} \par}
-\vspace*{2ex}
-    {\@degreedate}}
-  \end{center}}
-{\end{alwayssingle}}
-
-%Statement of originality if required
-
-\newenvironment{declaration} {\begin{alwayssingle} \pagestyle{empty}
-  \begin{center}
-  \vspace*{1.5cm}
-  {\Large \bfseries  Declaration}
-  \end{center}
-  \vspace{0.5cm}
-   \begin{quote}}
-{\end{quote}\end{alwayssingle}}
-
-
-%:-------------------------- page numbers: roman+arabic -----------------------
-
-% ROMANPAGES
-%
-% The romanpages environment set the page numbering to lowercase roman one
-% for the contents and figures lists. It also resets
-% page-numbering for the remainder of the dissertation (arabic, starting at 1).
-
-%\newenvironment{romanpages}
-%{
-%	\setcounter{page}{1}
-%	\renewcommand{\thepage}{\roman{page}}
-%} % close romanpage env't
- 
-{\newpage\renewcommand{\thepage}{\arabic{page}}\setcounter{page}{1}}
-
diff --git a/Master/texmf-dist/doc/latex/unamth-template/Latex/Macros/MacroFile1.tex.bak b/Master/texmf-dist/doc/latex/unamth-template/Latex/Macros/MacroFile1.tex.bak
deleted file mode 100644
index 09d9fe11070..00000000000
--- a/Master/texmf-dist/doc/latex/unamth-template/Latex/Macros/MacroFile1.tex.bak
+++ /dev/null
@@ -1,73 +0,0 @@
-% This file contains macros that can be called up from connected TeX files
-% It helps to summarise repeated code, e.g. figure insertion (see below).
-
-% insert a centered figure with caption and description
-% parameters 1:filename, 2:title, 3:description and label
-\newcommand{\figuremacro}[3]{
-	\begin{figure}[htbp]
-		\centering
-		\includegraphics[width=1\textwidth]{#1}
-		\caption[#2]{\textbf{#2} - #3}
-		\label{#1}
-	\end{figure}
-}
-
-% insert a centered figure with caption and description AND WIDTH
-% parameters 1:filename, 2:title, 3:description and label, 4: textwidth
-% textwidth 1 means as text, 0.5 means half the width of the text
-\newcommand{\figuremacroW}[4]{
-	\begin{figure}[htbp]
-		\centering
-		\includegraphics[width=#4\textwidth]{#1}
-		\caption[#2]{\textbf{#2} - #3}
-		\label{#1}
-	\end{figure}
-}
-
-% inserts a figure with wrapped around text; only suitable for NARROW figs
-% o is for outside on a double paged document; others: l, r, i(inside)
-% text and figure will each be half of the document width
-% note: long captions often crash with adjacent content; take care
-% in general: above 2 macro produce more reliable layout
-\newcommand{\figuremacroN}[3]{
-	\begin{wrapfigure}{o}{0.5\textwidth}
-		\centering
-		\includegraphics[width=0.48\textwidth]{#1}
-		\caption[#2]{{\small\textbf{#2} - #3}}
-		\label{#1}
-	\end{wrapfigure}
-}
-
-% predefined commands by Harish
-\newcommand{\PdfPsText}[2]{
-  \ifpdf
-     #1
-  \else
-     #2
-  \fi
-}
-
-\newcommand{\IncludeGraphicsH}[3]{
-  \PdfPsText{\includegraphics[height=#2]{#1}}{\includegraphics[bb = #3, height=#2]{#1}}
-}
-
-\newcommand{\IncludeGraphicsW}[3]{
-  \PdfPsText{\includegraphics[width=#2]{#1}}{\includegraphics[bb = #3, width=#2]{#1}}
-}
-
-\newcommand{\InsertFig}[3]{
-  \begin{figure}[!htbp]
-    \begin{center}
-      \leavevmode
-      #1
-      \caption{#2}
-      \label{#3}
-    \end{center}
-  \end{figure}
-}
-
-
-%%% Local Variables: 
-%%% mode: latex
-%%% TeX-master: "~/Documents/LaTeX/CUEDThesisPSnPDF/thesis"
-%%% End: