summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/tugboat
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2006-01-09 00:44:40 +0000
committerKarl Berry <karl@freefriends.org>2006-01-09 00:44:40 +0000
commitb4fc5f639874db951177ec539299d20908adb654 (patch)
tree52f08823ca58fffe3db6a9b075635038c567626c /Master/texmf-dist/doc/latex/tugboat
parentdec3d98ebe442d7ea93efbaa8dd2e2be8149a467 (diff)
doc 4
git-svn-id: svn://tug.org/texlive/trunk@80 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/latex/tugboat')
-rw-r--r--Master/texmf-dist/doc/latex/tugboat/README59
-rw-r--r--Master/texmf-dist/doc/latex/tugboat/ltubguid.ltx992
-rw-r--r--Master/texmf-dist/doc/latex/tugboat/ltubguid.pdfbin0 -> 260834 bytes
-rw-r--r--Master/texmf-dist/doc/latex/tugboat/tugboat.pdfbin0 -> 380193 bytes
4 files changed, 1051 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/tugboat/README b/Master/texmf-dist/doc/latex/tugboat/README
new file mode 100644
index 00000000000..2726ccb6e12
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tugboat/README
@@ -0,0 +1,59 @@
+LaTeX macros for use in TUGboat
+===============================
+
+The files in this directory will generate both a TUGboat articles
+class and a TUG conference proceedings class.
+
+These macros *are* supported; please do *not* bother the TUGboat
+editor with queries about the macros (or the TUGboat proceedings
+editor, if you're preparing an article for submission to a TUG
+conference). Bother me, instead (the editors do, in any case, so you
+might as well short-circuit them ;-)
+
+Robin Fairbairns
+robin.fairbairns@cl.cam.ac.uk
+
+Installation and use:
+=====================
+
+The directory contains three files containing TeX code:
+
+ tugboat.dtx -- the source for the macros
+ tugboat.ins -- the docstrip instructions
+ ltubguid.ltx -- documentation for the macros (published in TUGboat
+ 52, but revised since)
+
+other files are
+ ltugbib.bst -- a BibTeX style to match ltugboat.cls's default
+ biblio capabilities
+ ltubguid.pdf -- browsable user documentation
+ tugboat.pdf -- browsable implementation documentation
+
+Processing the .ins file produces:
+
+ ltugboat.cls -- For preparing articles for regular issues of TUGboat
+ ltugproc.cls -- For preparing articles for conference proceedings
+ ltugboat.sty -- The usual `obsolete file' warning
+ ltugproc.sty -- The usual `obsolete file' warning
+ ltugcomn.sty -- Used when processing tugboat.dtx for its
+ documentation content
+
+The procedure for using the macros should therefore be:
+
+ process the .ins file
+ move the .sty and .cls to "somewhere LaTeX will search"
+ move the .bib to "somewhere BibTeX will search"
+ move the browsable documentation to "somewhere texdoc will search"
+
+On a TDS installation, common search locations are:
+
+ $TEXMF/tex/latex/tugboat (for .sty, .cls)
+ $TEXMF/bibtex/bst/misc (for .bst)
+ $TEXMF/doc/latex/tugboat (for .pdf)
+
+($TEXMF being a pointer to the root of a TDS tree, preferably a local
+one, to avoid tangling with future releases of your TeX distribution.)
+
+`User-level' documentation is provided in file ltubguid.pdf, which is
+ a revised version of a TUGboat paper. The documented source of the
+ macros is also provided in readily readable form, as tugboat.pdf.
diff --git a/Master/texmf-dist/doc/latex/tugboat/ltubguid.ltx b/Master/texmf-dist/doc/latex/tugboat/ltubguid.ltx
new file mode 100644
index 00000000000..afc85ad0165
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tugboat/ltubguid.ltx
@@ -0,0 +1,992 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% tubguide.bib -- the bibliography for this paper (apart from the
+% references to TUGboat itself)
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+\begin{filecontents}{tubguide.bib}
+% BibTeX bibliography file (generated by aux2bib)
+
+@Misc{Arseneau:url:1996,
+ author = {Donald Arseneau},
+ title = {The {\textsf{url}} package},
+ year = {1996},
+ howpublished = {Available from {\CTAN}, {\CTANref{url}}}
+}
+
+@Article{Baxter:TB15-3-331,
+ author = {William Erik Baxter},
+ title = {{{An object-oriented programming system in {\TeX}}}},
+ journal = {{\TUB}},
+ year = {1994},
+ month = {September},
+ volume = {15},
+ number = {3},
+ pages = {331--338}
+}
+
+@Misc{Duggan:moreverb:1996,
+ author = {Angus Duggan and Rainer Sch{\umlaut{o}}pf and Victor Eijkhout and
+ Robin Fairbairns},
+ title = {The {\textsf{moreverb}} package},
+ year = {1997},
+ howpublished = {Available from {\CTAN}, {\CTANref{moreverb}}}
+}
+
+@Misc{Rahtz:hyperref:1997,
+ author = {Sebastian Rahtz},
+ title = {The {\textsf{hyperref}} system},
+ year = 1997,
+ howpublished = {Available from {\CTAN}, {\CTANref{hyperref}}}
+}
+
+@Book{Lamport:1994,
+ author = {Leslie Lamport},
+ title = {{\LaTeX}, a Document Preparation System},
+ edition = {\nth{2}},
+ year = {1994},
+ publisher = {Addison-Wesley}
+}
+
+@Article{Ogawa:TB15-3-325,
+ author = {Arthur Ogawa},
+ title = {{{Object-oriented programming, descriptive markup, and {\TeX}}}},
+ journal = {{\TUB}},
+ year = {1994},
+ month = {September},
+ volume = {15},
+ number = {3},
+ pages = {325--330}
+}
+
+@Article{Rowley:TB15-1-63,
+ author = {Chris Rowley},
+ title = {{{{\LaTeXe} update, dateline: 31 January 1994}}},
+ journal = {{\TUB}},
+ year = {1994},
+ month = {March},
+ volume = {15},
+ number = {1},
+ pages = {63}
+}
+
+@Misc{Schoepf:verbatim:1996,
+ author = {Rainer Sch{\umlaut{o}}pf},
+ title = {The {\textsf{verbatim}} package},
+ year = {1996},
+ month = {June},
+ howpublished = {Part of the \textsf{tools} bundle, available from {\CTAN},
+ {\CTANref{tools}}}
+}
+
+@Article{Swift:TB16-3-269,
+ author = {Matt Swift},
+ title = {Modularity in {\LaTeX}},
+ journal = {{\TUB}},
+ year = {1995},
+ volume = {16},
+ number = {3},
+ pages = {269--275}
+}
+
+@Misc{Vieth:mflogo:1995,
+ author = {Ulrik Vieth},
+ title = {The {\textsf{mflogo}} package},
+ year = {1995},
+ howpublished = {Available from {\CTAN}, {\CTANref{mflogo}}}
+}
+
+@Article{Whitney:TB10-3-378,
+ author = {Ron Whitney and Barbara Beeton},
+ title = {{{{\TUB} authors' guide}}},
+ journal = {{\TUB}},
+ year = {1989},
+ month = {November},
+ volume = {10},
+ number = {3},
+ pages = {378--385}
+}
+
+\end{filecontents}
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% ctandir.sty -- an experimental style file to go with Donald
+% Arseneau's url.sty to perform some of the functions that we use the
+% \FAQverb stuff in the UK TUG FAQ for
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+\begin{filecontents}{ctandir.sty}
+%
+% Experimental CTAN location information macros for use with Donald
+% Arseneau's |url.sty|
+%
+% we need url.sty; we can rely on it to demand anything it needs of
+% LaTeX
+\IfFileExists{url.sty}%
+ {\RequirePackage{url}}%
+ {\PackageWarning{ctandir}{You should acquire a copy of url.sty}%
+ \newcommand\urldef[3]{\def#1{\texttt{#3}}}%
+ \let\url\texttt
+ }
+%
+\newcommand\CTANdirectory[1]{\expandafter\urldef
+ \csname CTAN@#1\endcsname\path}
+\newcommand\CTANfile[1]{\expandafter\urldef
+ \csname CTAN@#1\endcsname\path}
+%
+% Use the standard label-referencing mechanism to get the warning for
+% an undefined label
+\newcommand\CTANref[1]{\expandafter\@setref\csname CTAN@#1\endcsname
+ \relax{#1}}
+\end{filecontents}
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+\listfiles
+\setcounter{errorcontextlines}{999}
+\documentclass[harvardcite]{ltugboat}
+\usepackage{ctandir}
+\IfFileExists{booktabs.sty}%
+ {\usepackage{booktabs}}%
+ {\let\midrule\hline}
+%
+% only tell me important overfulls, please
+\hfuzz=2pt
+%
+% ahem, why not?
+\hyphenation{col-umns}
+%
+% define CTAN addresses using the commands of the |ctandir| package
+\CTANdirectory{bibextract}{biblio/bibtex/utils/bibextract}
+\CTANdirectory{mflogo}{macros/latex/contrib/mflogo}
+\CTANdirectory{moreverb}{macros/latex/contrib/moreverb}
+\CTANdirectory{packages}{macros/latex/required}
+\CTANdirectory{tools}{macros/latex/required/tools}
+\CTANdirectory{tub-latex}{macros/latex/contrib/tugboat}
+\CTANdirectory{hyperref}{macros/latex/contrib/hyperref}
+%
+\CTANfile{cite}{macros/latex/contrib/cite/cite.sty}
+\CTANfile{tub-biblio}{digests/tugboat/biblio/tugboat.bib}
+\CTANfile{url}{macros/latex/contrib/misc/url.sty}
+%
+% commands that would be defined by changebar if we were using it:
+\providecommand\cbstart{}
+\providecommand\cbend{}
+%
+% this isn't really all that much of a `proof' copy
+\NoBlackBoxes
+%
+% ***** Commands provided by this paper *****
+%
+% Typeset the name of an environment, class, package, option, program
+\providecommand\envname[1]{\textsf{#1}}
+\providecommand\clsname[1]{\textsf{#1}}
+\providecommand\pkgname[1]{\textsf{#1}}
+\providecommand\optname[1]{\textsf{#1}}
+\providecommand\progname[1]{\textsf{#1}}
+%
+% A list of options for a package/class
+\newenvironment{optlist}{\begin{description}%
+ \renewcommand\makelabel[1]{%
+ \descriptionlabel{\mdseries\optname{##1}}}%
+ \itemsep0.25\itemsep}%
+ {\end{description}}
+%
+% A list of command names (using \mdwcmd, which as its name implies
+% comes from the work of Mark Wooding)
+\newenvironment{cmdlist}{\begin{description}%
+ \renewcommand\makelabel[1]{%
+ \descriptionlabel{\mdseries\mdwcmd##1}}%
+ \itemsep0.25\itemsep}%
+ {\end{description}}
+%
+\makeatletter
+\providecommand{\mdwcmd}[1]{%
+ \expandafter\texttt\expandafter{\string#1}%
+ \mdwcmd@i}
+\def\mdwcmd@i{\futurelet\@let@token\mdwcmd@ii}
+\def\mdwcmd@ii{%
+ \let\@tempa\relax%
+ \ifx\@let@token\bgroup%
+ \def\@tempa##1{\texttt{\char`\{}\textit{##1}\texttt{\char`\}}\mdwcmd@i}%
+ \fi%
+ \ifx\@let@token[%
+ \def\@tempa[##1]{\texttt{[}\textit{##1}\texttt{]}\mdwcmd@i}%
+ \fi%
+ \@tempa%
+}
+\makeatother
+%
+% for raggedy-footnotes (necessary for CTAN references, I find)
+\newcommand\raggedfoot{\rightskip=\raggedskip plus\raggedstretch\relax}
+%
+% To use umlauts in a bibliography entry in BibTeX 0.99, we have to
+% use a certain amount of subterfuge...
+\let\umlaut\"
+%
+%%%%%%%%%%%%%%%%
+\begin{document}
+%%%%%%%%%%%%%%%%
+%
+\title{The New (\LaTeXe) \TUB{} Macros}
+\author{Robin Fairbairns}
+\address{University of Cambridge Computer Laboratory\\
+ William Gates Building\\
+ J J Thomson Avenue,\\
+ Cambridge CB3 0FD,\\
+ UK}
+\netaddress{rf@cl.cam.ac.uk}
+\personalURL{http://www.cl.cam.ac.uk/users/rf/robin.html}
+\maketitle
+
+\section{Introduction}
+
+This note reports on a new set of macros for use by \TUB{} authors.
+The macros represent a development of the earlier \clsname{ltugboat} and
+\clsname{ltugproc} styles that were written for use with \LaTeX~2.09. The
+development was started by others than I, notably Sebastian Rahtz,
+Michel Goossens, Nico Poppelier and Johannes Braams; I have been
+assisted in my work both directly and indirectly by many others,
+including Barbara Beeton, Mimi Burbank and (of course) the \LaTeX3
+team.
+
+The ultimate aim of the work is to provide a single production
+environment for the whole of \TUB{}. That aim has not (yet) been
+achieved, though it is still believed to be achievable for a
+significant proportion of papers.\footnote{\TUB{} will continue to
+accept papers written using the `plain' macros; it's probably
+fanciful to hope that \emph{every} paper can be moulded into use
+within \LaTeX.}
+
+\section{Availability}
+
+\begin{sloppypar}
+ The macros are released for general use, and are distributed via
+ \CTAN{}\footnote{\raggedfoot From directory \CTANref{tub-latex}} in the usual
+ \LaTeX{} way as files \path|tugboat.dtx| and \path|tugboat.ins|.
+ When the\,\verb|.ins| file is processed by \LaTeX{}, the files
+ \path|ltugboat.cls|, \path|ltugproc.cls| and \path|ltugbib.bst| (for
+ ordinary production work) and \path|ltugcomn.sty| (a cooking pot of
+ useful macros, for documentation, etc.)\ are produced. The\,\verb|.dtx|
+ file may itself be processed by \LaTeX{} to produce a formatted
+ (somewhat `literate') source listing for those who feel they need
+ more detailed description of the macros than is offered in the
+ present note.
+\end{sloppypar}
+
+\section{The general structure of a paper}
+
+The author need not understand the details of the production of
+\TUB{}\Dash her business is to produce the text that the editor is to
+mould into the body of an issue.
+
+However, any modern author wants to be able to view the progress of
+her efforts; for this, she needs to use the \TUB{} class
+\path|ltugboat.cls|\Dash it defines the way an article in a normal issue of
+\TUB{} will appear, and is therefore a useful aid.
+
+Similarly, one submitting a paper for presentation at an annual \tug{}
+conference may use the \path|ltugproc.cls|, which will set the paper as it
+should appear in a proceedings issue of \TUB{}.
+
+Each paper, therefore, is written as a document that may stand on its
+own. It starts with a \cs{documentclass} command, and its body is
+enclosed in a \envname{document} environment. Each of the document
+classes specifies a set of options, described in the next two
+subsections (\ref{sec:boat-opts} and~\ref{sec:proc-opts}). In the
+ordinary course of events the author needn't bother with any of these
+options, since the defaults are designed for creating proof copies of
+papers.
+
+Since the author typesets her paper in a `proof mode', the paper's
+published appearance will differ from its appearance at the time of
+submission. The changes required in this process are the
+responsibility of the \TUB{} production team, and the author need not
+be concerned with them.
+
+\subsection{Class options: the \clsname{ltugboat} class}
+\label{sec:boat-opts}
+
+The \clsname{ltugboat} class accepts all the options of the
+\clsname{article} class (though it suppresses the font-size selection,
+one/two-side and one/two-column options).
+\begin{optlist}
+\item[draft] Set up for a draft copy of a paper (this is the default
+ setting\Dash the author need not explicitly set it): page numbering
+ to start at 1001, black marks for overfull boxes, and no
+ registration marks.
+\item[extralabel] Use the extra label-distinguishing mark in the body
+ of the reference; see section~\ref{sec:biblio}.
+\item[final] Set up for the final copy of a paper: page numbering to
+ come from elsewhere, no black marks, and registration marks to be
+ used.
+\item[harvardcite] Specify Harvard-style citation; see
+ section~\ref{sec:biblio}.
+\item[noextralabel] Don't use the extra label-distinguishing mark in
+ the body of the reference; see section~\ref{sec:biblio}.
+\item[nonumber] Sections are not to be numbered; section heading
+ layout is to be as in the `plain' \pkgname{tugboat} styles.
+\item[numbersec] Sections, subsections and subsubsections are to be
+ numbered (this is the default setting\Dash the author need not
+ explicitly set it).
+\item[preprint] Set up for a preprint.
+
+\item[rawcite] Specify default (unnumbered) citation; see
+ section~\ref{sec:biblio}.
+\end{optlist}
+
+\subsection{Class options: the \clsname{ltugproc} class}
+\label{sec:proc-opts}
+
+The \clsname{ltugproc} class accepts all of the options allowed with
+\clsname{ltugboat}. In addition, it accepts an option that specifies
+the year of the conference for which the paper is submitted. For
+example, the conference for 2004 would be specified by option
+%
+%% % although this paper will be published in 1996, it may be reprinted
+%% % again in the future, so let's calculate `this year' on the fly
+%% \newcount\y
+%% \y\year
+%% \divide\y100
+%% \multiply\y100
+%% \advance\y-\year
+%% \y-\y
+%
+% from 2000 on, the option is just the year
+\optname{tug\number\year}. Such an option may be necessary if the
+(detailed) type design of papers for the year's proceedings issue is
+changed by the year's editor. Unless ``instructions to authors''
+say otherwise, authors should not specify such an option, and
+\clsname{ltugproc} will choose an appropriate default.
+
+The class reads a configuration file
+\path|ltugproc.cfg|, in which you may specify the year by a command of
+the form:
+\begin{verbatim}[\small]
+ \newcommand{\tugProcYear}{97}
+\end{verbatim}
+
+The class deals with two-digit year selections for conferences up to
+2069 (which date was chosen entirely at random, uninfluenced, of
+course, by the Unix\texttrademark Epoch\dots); however, the user
+should not feel constrained to write such confusing dates since
+\clsname{ltugproc} will cope with the full year number (4 digits, for
+quite a while yet).
+
+\section{Command syntax}
+\label{sec:syntax}
+
+We would have liked to offer perfectly uniform syntax for people to
+use when preparing their papers. Unfortunately, uniform syntax is not
+available with any widely-available set of macros (though see, for
+example, the discussions in \citeNP{Ogawa:TB15-3-325},
+\citeNP{Baxter:TB15-3-331}, and \citeNP{Swift:TB16-3-269}). In the
+circumstances, we have sought simply to keep to the spirit of
+Lamport's \citeyear{Lamport:1994}, as modified\footnote{The cited
+ edition of Lamport's book documents the modified version of \LaTeX{},
+ but it's worth emphasising that we use the modified version as the
+ reference.} by the \LaTeXe{} work (see, for example,
+\citeNP{Rowley:TB15-1-63}).
+
+In the few cases that it has proved possible to emulate (what seems to
+a staid old \LaTeX{} programmer, such as the present author) the gay
+abandon of the syntax of the `plain' \pkgname{tugboat} styles
+\cite{Whitney:TB10-3-378}, we have done. Nevertheless, on the whole,
+the new \clsname{ltugboat} macros simply define \LaTeX{} commands and
+environments, or modify the definitions of \LaTeX{} `standard'
+commands. Section~\ref{sec:equiv} lists equivalences between macros
+defined by the `plain' package and those defined by the new package.
+
+The `down' side of this decision is, of course, the `welter of
+\LaTeX{} braces' that Barbara Beeton has been heard to complain of in
+production team discussions. One has to hope that the (near)
+uniformity of syntax offers those who think like Barbara some small
+recompense!
+
+\section{Divisions of the paper}
+\label{sec:divs-paper}
+
+Papers in \TUB{} may be subdivided in the normal way of a \LaTeX{}
+article (the classes are defined in terms of \LaTeX{}'s
+\clsname{article} class). Thus the author may use \cs{section},
+\cs{subsection}, \dots, \cs{paragraph} commands (but \cs{part} and
+\cs{subparagraph} from \clsname{article} are suppressed, and
+\cs{chapter}, which doesn't even appear in the parent class, receives
+the same treatment).
+
+Authors should note that the style of ordinary issues of \TUB{} makes
+no distinction between the titles of the divisions; the visual style
+relies on the section numbers to indicate where the divisions lie in
+the hierarchy. As a result, the un-numbered `\verb|*|' forms of the
+\cs{section}, etc., commands, are inappropriate. The
+\clsname{ltugboat} class therefore warns the author who (possibly
+inadvertently) uses one of these forms. (The author who wishes to use
+un-numbered sections throughout her paper may use the
+\optname{nonumber} class option (see~\ref{sec:boat-opts}).
+
+By contrast, whether or not sections are numbered in a conference
+proceedings issues of \TUB{} is a matter of that year's editor's
+choice (in collaboration with the \TUB{} team). If sections are not
+to be numbered, the use of `\texttt{*}' forms is inappropriate, and the
+class equally warns the author. Since the sections don't have
+numbers, references to section numbers don't work; they therefore
+(once they're resolved) warn the author of potential problems.
+
+Reference may, however, be made to the `title' of divisions of the
+paper, whether they are numbered or not. The \cs{nameref} command
+(which uses the technique developed for the \textsf{hyperref} package
+\cite{Rahtz:hyperref:1997}) permits such references; for example, the
+present section was introduced by:
+\begin{verbatim}[\small]
+ \section{Divisions of the paper}
+ \label{sec:divs-paper}
+\end{verbatim}
+and the command \verb|\nameref{sec:divs-paper}| produces
+`\nameref{sec:divs-paper}'.
+
+\subsection{Abstracts}
+
+The classes make provision for abstracts, but the provision is
+different for the two classes.
+
+The \clsname{ltugboat} class provides two environments, \envname{abstract}
+and \envname{longabstract}. The \envname{abstract} environment simply
+typesets its body as an un-numbered section whose title is
+`Abstract'. The \envname{longabstract} environment typesets its body in
+small text, and separates the abstract from the rest of the paper with
+a decorative line.
+
+The \clsname{ltugproc} class typesets abstracts as part of the title
+of the paper, below the names and addresses of the authors, but before
+the main body of the paper. Therefore, for proceedings articles, the
+\envname{abstract} environment must appear in the source of the paper
+\emph{before} the \cs{maketitle} command (it may even appear before
+\verb"\begin{document}", if the author so chooses).
+
+\subsection{Appendices}
+
+A paper may have appendices, which are expressed in exactly the same
+way as they would be in \LaTeX{} article class:
+
+\begin{verbatim}[\small]
+\appendix
+\section{This is appendix A}
+...
+\section{This is appendix B}
+\end{verbatim}
+Which will produce `section' headings similar to:
+\begin{quote}
+\textbf{A\quad This is appendix A}
+\end{quote}
+
+\TUB{} articles may have a small extension to this format: this
+extension was originally developed for proceedings issues, but is also
+available in normal issues:
+
+\begin{verbatim}[\small]
+\begin{appendix}
+\section{This is the first one}
+...
+\end{appendix}
+\end{verbatim}
+Which will produce `section' headings similar to:
+\begin{quote}
+\textbf{Appendix A\quad This is the first one}
+\end{quote}
+
+In both cases, the subsections are numbered as normal (i.e., as
+`A.\ensuremath{n}' in normal \TUB{} papers, and not at all in
+proceedings classes).
+
+\section{Titles, addresses and so on}
+
+The title and author(s) of a paper are quoted using commands that are
+familiar (in syntax, at least) to most \LaTeX{} users; the \cs{title}
+command is exactly that used in the standard \LaTeX{} classes.
+
+The \cs{author} command is used once for each co-author of the paper,
+and for each \cs{author} there should be a \cs{address} command that
+gives a (postal) correspondence address. In addition (wherever
+possible), \TUB{} likes to quote an email address for authors: for
+this, the \cs{netaddress} command is used. Finally, each
+author may advertise a `home' Web page, using a \cs{personalURL} command.
+
+For example, the present paper has at its start:
+
+\begin{verbatim}[\small]
+\title{The New (\LaTeXe) \TUB{} Macros}
+\author{Robin Fairbairns}
+\address{University of Cambridge
+ Computer Laboratory\\
+ Pembroke Street,\\
+ Cambridge, CB2 3QG,\\
+ UK}
+\netaddress{rf@cl.cam.ac.uk}
+\personalURL{http://www.cl.cam.ac.uk/...}
+\maketitle
+\end{verbatim}
+
+Since this paper is prepared for a normal issue of \TUB{} and
+therefore uses the \clsname{ltugboat} class, the \cs{maketitle} merely
+typesets the title of the paper and the author's name. The
+address(es) are typeset at the end of the paper where the author gives
+a \cs{makesignature} command.
+
+The \clsname{ltugproc} class typesets all the information about the
+author at the head of the paper, when the \cs{maketitle} is given;
+this class disallows the \cs{makesignature} command.
+
+Note that the author had a problem typesetting the above example
+verbatim: the lines are too long. If the information being given is
+to be typeset as ordinary text (as in the case of the \cs{address}
+line above), it can be `wrapped' perfectly happily, as in normal text.
+If one of the verbatim items (\cs{netaddress} or \cs{personalURL}
+commands) is going to be too wide for the column, what is the author
+to do? (Abbreviating the text, as in the \cs{personalURL} above, is
+\emph{not} usually an acceptable option!) Unfortunately, the \verb|%|
+sign is an entirely acceptable element of both email addresses and
+\acro{URL}s, so that the normal `fall-back' isn't available.
+Therefore, the classes typeset these electronic addresses in an
+environment where some of the characters (notably `\verb|.|' and
+`\verb|/|') are treated as word-divisions for the purposes of laying
+out the line. This is visible in the case of my personal \acro{URL},
+in the signature block at the end of the present paper.
+
+If the paper is the result of more than one author's labours, a sequence of
+\cs{author}, \cs{address}, \cs{netaddress} and \cs{personalURL}
+commands may be given, as in the following, which comes from a paper
+given at \tug'95 (slightly edited):
+
+\begin{verbatim}[\small]
+\author{Michel Goossens}
+\address{CN Division, CERN\\
+ ...}
+\netaddress{...}
+
+\author{Sebastian Rahtz}
+\address{Elsevier Science Ltd\\
+ ...}
+\netaddress{...}
+
+\author{Robin Fairbairns}
+\address{University of Cambridge
+ Computer Laboratory\\
+ ...}
+\netaddress{...}
+\personalURL{...}
+\end{verbatim}
+
+The class files will take care of arranging author names and addresses
+between the \cs{maketitle} and (possibly) \cs{makesignature} commands.
+
+\subsection{Compilation articles}
+
+\begin{sloppypar}
+ Compilation articles are built from a set of contributed parts, and
+ are under the general (sub-)\penalty0\relax\hskip0pt plus0pt minus0pt\relax
+ editorship of the author\footnote{Or authors: there's no reason in
+ particular that compilation articles should not be put together
+ more than one person} of the article. The author of the article
+ is presented (using \cs{author} and suchlike commands) in the usual
+ way, and writes the introductory text. Each contributors' part then
+ follows. The contributor's name is quoted in the \cs{contributor}
+ command, which is an analogue of the \cs{author} command;
+ contributors' \cs{address}, \cs{netaddress} or \cs{personalURL}.
+ The \cs{contributor} command opens a group in which the contribution
+ appears, and the contributor's signature (produced with a
+ \cs{makesignature} command) closes the group. The general scheme
+ looks like:
+\end{sloppypar}
+\begin{verbatim}[\small\makeescape\|\makebgroup\[\makeegroup\]]
+\title{Example compilation article}
+\author{Robin Fairbairns}
+\address{University of Cambridge ...}
+\netaddress{...}
+ ...
+ |emph[introductory text]
+ ...
+\makesignature
+
+\contributor{Betsy the Dog}
+\address{Romsey Town, Cambridge}
+ ...
+ |emph[Betsy's contribution]
+ ...
+\makesignature
+
+...
+\end{verbatim}
+
+\section{Verbatim text}
+\label{sec:verbatim}
+
+The classes do not at present provide the same wide range of
+facilities as the `plain' \pkgname{tugboat} style
+\cite{Whitney:TB10-3-378}; the author had hoped to `borrow' facilities
+from a package which is believed to be in development, but in the
+event that package has not materialised.
+
+For in-line verbatim text, authors should ordinarily employ the
+facilities of \LaTeX{} itself (the \cs{verb} macro). This macro, of
+course, is highly restricted as to its usage (primarily, that it may
+not appear in the argument of \emph{any} other macro, even
+\cs{footnote}).
+
+For `display verbatim' (to employ the term used by
+\citeANP{Whitney:TB10-3-378}), the classes add a small increment to
+the functionality of \LaTeX{}'s \envname{verbatim} environment, by
+introducing an optional argument. The optional argument may contain
+commands to be executed before starting the verbatim text; the set of
+commands which have useful effect is strictly limited, but the
+following are commonly used:
+\begin{itemize}
+\itemsep=0.2\itemsep
+\item Font size selection commands: for example, all the display
+ verbatim in the present paper starts with:
+
+ {\small\verb| \begin{verbatim}[\small]|}
+\item The command \cs{ruled}, which is available \emph{only} in
+ \envname{verbatim}'s optional argument, and specifies that a
+ column-wide rule should be drawn before and after the verbatim text
+\item One of the \cs{make*} commands,\footnote{\cs{makeescape},
+ \cs{makebgroup}, \dots, \cs{makecomment}; used, for example, as
+ \cs{makeescape}\cs{|}} which change the category code of
+ characters within the verbatim text. This is (of course) a facility
+ that should only be used with the utmost caution, but it can, for
+ example, be employed to provide interesting effects by knowledgeable
+ authors.
+\end{itemize}
+Two caveats about the use of this facility should be noted:
+\begin{itemize}
+\itemsep=0.2\itemsep
+\item The search for the optional argument can be confused by the
+ appearance of a \verb|[| character as the first of the displayed
+ verbatim. An author who wishes to start verbatim text with a
+ \verb|[| character should provide an empty optional argument (i.e.,
+ simply `\verb|[]|') to the \envname{verbatim} environment.
+\item The facility is lost when certain packages are loaded. An
+ example is the \pkgname{verbatim} package
+ \cite{Schoepf:verbatim:1996}, which redefines the \envname{verbatim}
+ environment in its entirety. Of course, any package that loads
+ \pkgname{verbatim} (such as \pkgname{moreverb},
+ \shortciteNP{Duggan:moreverb:1996}) will necessarily have the same
+ effect. (It should be noted that \pkgname{verbatim} and
+ \pkgname{moreverb} provide some of the facilities that are available
+ in the `plain' \pkgname{tugboat} styles, so that an author could
+ reasonably be tempted to use them. There is no objection in
+ principle to authors using these packages.)
+\end{itemize}
+
+\section{Floating inserts}
+
+The classes do not make any change to \LaTeX{}'s built-in provision
+for floating inserts, so that authors may generate figures and tables
+just as they would in any `normal' \LaTeX{} document. Figure and
+table captions, and labels referring to them, are also substantially
+untouched.
+
+However, since both classes typeset in two columns, authors must
+distinguish between the \envname{figure} and \envname{table} environments
+(which produce floats that are the same width as the column) and the
+\envname{figure*} and \envname{table*} (which produce floats that are the same
+width as the page).
+
+%\begin{itemize}
+%\item figures and tables as normal
+%\item captions and labels work whatever (i.e., no restriction on
+% numbering)
+%\item twocolumn setting implies distinction between \envname{figure} and
+% \envname{figure*}
+%\end{itemize}
+
+\section{Special-purpose typesetting}
+
+The classes define a rather large set of commands for special-purpose
+typesetting. Some of them are available for historical reasons only,
+and many are only useful in somewhat restricted circumstances. For
+this reason, the present paper only outlines a representative, small
+set of the macros.
+
+\subsection{Acronyms and logos}
+
+The classes provide macros that produce `correct' representations of a
+large number of acronyms and logos; a small representative selection is
+shown in figure~\ref{fig:acro-logo}.
+\begin{figure}[htbp!]
+ \begin{center}
+ \begin{tabular}{@{}ll@{}}
+ \small\textsl{\textsf{Macro}}&\small\textsl{\textsf{Output}}\\
+ \midrule
+ \verb|\CTAN| & \CTAN \\
+ \verb|\eTex| & \eTeX \\
+ \verb|\HTML| & \HTML \\
+ \verb|\ISBN| & \ISBN \\
+ \verb|\ISSN| & \ISSN \\
+ \verb|\MF| & \MF \\
+ \verb|\MP| & \MP \\
+ \verb|\NTS| & \NTS \\
+ \verb|\OMEGA| & \OMEGA \\
+ \verb|\OTP| & \OTP \\
+ \verb|\SGML| & \SGML \\
+ \verb|\TUB| & \TUB \\
+ \verb|\TUG| & \TUG \\
+ \verb|\tug| & \tug \\
+ \end{tabular}
+ \end{center}
+ \caption{Some of the classes' acronyms and logos}
+ \label{fig:acro-logo}
+\end{figure}
+
+Authors are urged to note the \cs{acro} command, which is defined in
+the classes. The visual appearance of (mostly) lower-case English
+text, with interpolated acronyms in the same point size, is generally
+unpleasing. Therefore, the \cs{acro} command typesets its argument
+slightly smaller than it would otherwise appear: compare `\acro{URL}'
+(\verb|\acro{URL}|, as used above) with `URL'\@. Many macros that
+simply generate calls to \cs{acro} are defined by the classes; two
+examples, \cs{CTAN} and \cs{tug} of the list in
+figure~\ref{fig:acro-logo} have already been used in the present
+paper.
+
+\subsection{Other special typesetting}
+
+A small list of special typesetting commands follows: a large set of
+such commands is defined in the classes, but the list covers most of
+the `everyday' ones.
+\begin{cmdlist}
+\item[\cs{cmd}] Typeset a control sequence name. (The command
+ \verb|\cs{fred}| is typeset as \cs{fred}.)
+\item[\env{environment}] Typeset an environment name as if at the
+ start of the environment. (The command \verb|\env{fred}| is typeset
+ as \env{fred}.)
+\item[\meta{arg}] Typeset a formal argument name. (The command
+ \verb|\meta{fred}| is typeset as \meta{fred}.)
+\item[\Dash] Typeset an em-dash, surrounded by thin spa\-ces, only
+ breakable \emph{after} the dash; this is the preferred method of
+ specifying a dash in running text.
+\item[\dash] Typeset an en-dash, in the same way as \cs{Dash} does.
+\item[\nth{n}] Typeset an ordinal number. For example, \verb|\nth{1}| is
+ set as \nth{1}, \verb|\nth{27}| is set as \nth{27}, and so on.
+\item[\sfrac{num}{denom}] Typeset a fraction to match running text;
+ for example \verb|\sfrac{3}{4}| is set as \sfrac{3}{4}\,.
+\end{cmdlist}
+
+\section{Use of packages}
+
+In general, the \TUB{} team will be sympathetic to authors who wish to
+use non-standard packages in their papers; indeed, in a journal
+devoted to the usage of \TeX{}, the editor would be churlish indeed to
+refuse such usage. However, the team does need to be able to process
+the paper on the \TUB{} production computers, and the author who is
+slapdash about the way she submits her paper will cause confusion and
+delay. (Remember that the editorial team is a group of volunteers,
+each working in his or her spare time.)
+
+In general, packages currently on \CTAN, and known to work with
+\emph{current} \LaTeX{},\footnote{The team's version of \LaTeX{} is
+ regularly updated, though not during the course of a production
+ run.} are unlikely to give problems.
+
+In particular, the team is happy to accept papers using packages
+that are supported by members of the \LaTeX3 team,\footnote{%\raggedfoot
+ Those in the \LaTeX{} base distribution, or one of those on the
+ \CTANref{packages} sub-tree on \CTAN.} subject to the two provisos:
+\begin{itemize}
+\itemsep=0.2\itemsep
+\item Use of the \pkgname{verbatim} package has implications for the
+ \envname{verbatim} facilities provided by the classes\Dash see
+ section~\ref{sec:verbatim}.
+\item Use of \pkgname{babel} almost inevitably implies use of
+ hyphenation patterns that the team may not have installed in their
+ \LaTeX{} format; it is therefore important that the author explains
+ her \pkgname{babel} configuration to the editorial team. The
+ minimum documentation required is a copy of the author's
+ \url{language.dat} file, and copies (or \CTAN{} pointers to) any
+ hyphenation files used.
+\end{itemize}
+
+Usage of other packages should always be subject to negotiation with
+the team. If the team does not have access to a copy of the package,
+life is going to be very difficult; authors are urged to be sensible
+in this regard. A sensible mechanism for submitting
+out-of-the-ordinary packages (as for paper-specific bibliographies) is
+by use of the \envname{filecontents} environment.
+
+\cbstart
+\tug{} has a policy that macro packages described in \TUB{} should be
+available for readers to use. Since typing macros from printed
+sources is such an error-prone undertaking, authors of publicly
+available packages are urged to submit their macros to the \CTAN{}
+archives. If a package is only available under restricted terms,
+authors are urged to make this fact clear when first submitting an
+article to the editor.
+\cbend
+
+Some facilities are considered inappropriate to delivery by the
+\TUB{} classes, and as a result, the \TUB{} team recommend certain
+packages to authors.
+
+At present, the list of recommended packages consists of only two,
+\path|mflogo.sty| \cite{Vieth:mflogo:1995} and \path|url.sty|
+\cite{Arseneau:url:1996}.
+
+Both classes will load the \pkgname{mflogo} package if it is present on the
+author's system; if the package is not present, the classes will
+emulate its more important features; the package defines \MF{} and
+\MP{} logos using recent versions of Knuth's \verb|logo10| font family.
+
+The \pkgname{url} package is useful when one is typesetting significant
+numbers of file names, network addresses or \acro{URL}s; it is being
+used in the present paper (not least in the bibliography).
+
+\section{Bibliography}
+\label{sec:biblio}
+
+Bibliographic citations give much grief to the editorial team. Good
+publishing practice requires that there be editorial control of the
+way citations in a journal are presented yet, all too often, authors
+submit articles whose bibliography is formatted according to their
+preference. The important rules for authors, then, are that they
+\emph{shouldn't} supply a \verb|.bbl| file (\BibTeX{} processed output),
+and that they \emph{shouldn't} write out a \envname{thebibliography}
+environment, but should rather submit a working \verb|.bib| file with their
+paper.\footnote{The program \progname{bibextract}, available from
+ \CTAN{} in directory \CTANref{bibextract}, provides a convenient
+ mechanism for extracting just the relevant portions of your
+ bibliography database for submitting your paper; many of the common
+ \BibTeX{}-database management packages, such as \textsc{BibDB} or
+ \textsc{Bib}Tools offer similar facilities.} As with uncommon
+packages, the \envname{filecontents} environment is a convenient way to
+deliver the bibliography file.
+
+A special case is made of the accumulated bibliography of \TUB{}
+itself;\footnote{\raggedfoot Available on \CTAN{} as
+ \CTANref{tub-biblio}} it is always available to the production team,
+so that authors may make reference to items from that \verb|.bib| file
+without further ado.
+
+Two citation styles are supported within \TUB{} articles, `\emph{raw}'
+and `\emph{harvard}' (the present article is employing \emph{harvard}
+citation). The raw citation style uses the `standard'
+\BibTeX{} `\pkgname{plain}' (numeric) citation style; its modification
+by use of Donald Arseneau's \pkgname{cite}
+package\footnote{\raggedfoot Available on \CTAN{} as \CTANref{cite}}
+is acceptable. Raw citation is selected by default (by execution of
+class option \optname{rawcite}).
+
+Harvard citation may be selected by specifying \optname{harvardcite} as an
+option of the \cs{documentclass} command. The macros used derive
+pretty directly from the \textsl{\pkgname{harvard}} styles written by Glenn
+Paulley and now maintained by Peter Williams; the \BibTeX{} style
+derives from one developed by Patrick Daly.
+
+The basic citation format is `author-year', but the macros are capable
+of many variations: this in turn places somewhat of a load on the
+author to use the correct citation macro. The macros available are
+shown in figure~\ref{fig:citation-macros}; the figure assumes an entry
+in the bibliography with authors Tom, Dick, and~Harry, and with a
+1990 date.
+
+\begin{figure}[htbp!]
+ \begin{center}
+ \leavevmode
+ \begin{tabular}{@{}ll@{}}% @{ $\rightarrow$ } between columns removed
+ \small\textsf{\textsl{Macro}} &\small\textsf{\textsl{Output}}\\
+ \midrule
+ \verb|\cite{key}| & (Tom, Dick, and Harry, 1990)\\
+ \verb|\citeA{key}| & (Tom, Dick, and Harry)\\
+ \verb|\citeNP{key}| & Tom, Dick, and Harry, 1990\\
+ \verb|\citeANP{key}| & Tom, Dick, and Harry\\
+ \verb|\citeN{key}| & Tom, Dick, and Harry (1990)\\
+ \verb|\shortcite{key}| & (Tom et al., 1990)\\
+ & [also has \texttt{A} and \texttt{NP}
+ variants]\\
+ \verb|\citeyear{key}| & (1990)\\
+ & [also has an \texttt{NP} variant]
+ \end{tabular}
+ \end{center}
+ \caption{The range of citations in \optname{harvard} style}
+ \label{fig:citation-macros}
+\end{figure}
+
+Note that, if Tom, Dick, and Harry are a prolific team, there can
+easily be more than one reference to their work in one year. In such
+a case, the citations will be (Tom, Dick, and Harry, 1990a), (Tom,
+Dick, and Harry, 1990b), and so on. These extra `a', `b', etc., tags
+may also appear in the references section of the paper, attached to
+the year recorded for the reference: whether this indeed happens is
+controlled by the \optname{extralabel} and \optname{noextralabel} class
+options. The default state (option \optname{extralabel}) attaches the
+extra characters.
+
+Bibliographies provide further problems because they're notoriously
+difficult to typeset at the best of times. \LaTeX{} sets \cs{sloppy}
+when typesetting the bibliography, but this can often lead to pretty
+unpleasant output in the narrow columns typical of \TUB{}. The author
+may control the typesetting using the command
+\cs{SetBibJustification}. The classes set \cs{sloppy}, by default
+(just like \LaTeX{}), but the author may (for example) say:
+\begin{verbatim}
+ \SetBibJustification{\raggedright}
+\end{verbatim}
+as the present article does, to achieve somewhat better results.
+
+\section{Equivalences between the `plain' and the \LaTeX{} packages}
+\label{sec:equiv}
+
+A good proportion of the commands in the `plain' packages also appear
+(with the same meaning) in the \LaTeX{} classes.
+Figure~\ref{fig:plain-equiv} gives a brief summary of where the macros
+differ significantly.
+
+\begin{figure}[htbp]
+ \begin{center}
+ \leavevmode
+ \begin{tabular}{@{}ll@{}}
+ \small\textsf{Plain macro} & \small\textsf{\LaTeX{} macro} \\
+ \midrule
+ \cs{head} & \cs{section} \\
+ \cs{subhead} & \cs{subsection} \\
+ \cs{subsubhead} & \cs{subsubsection} \\
+ \cs{list} & \envname{itemize}, \envname{enumerate}, etc., \\
+ & environments \\
+ \cs{verbatim} & \envname{verbatim} or \cs{verb} \\
+ \cs{figure} & \envname{figure} or \envname{figure*} environments \\
+ \end{tabular}
+ \end{center}
+ \caption{Equivalences between \pkgname{plain} and \LaTeX{} macros}
+ \label{fig:plain-equiv}
+\end{figure}
+
+\LaTeX{} itself makes comprehensive provision for lists; the \TUB{}
+classes make no attempt to emulate the list facilities of the `plain'
+macros.
+
+The `plain' styles' provision for verbatim text is also somewhat
+different from the \LaTeX{} approach; the \TUB{} classes offer a small
+subset of the extra facilities that the `plain' styles provide; for
+more elaborate facilities, the user is referred to the
+\pkgname{verbatim} and \pkgname{moreverb} packages (see
+section~\ref{sec:verbatim}).
+
+Of course, the syntax of commands given to the \LaTeX{} classes is
+different (as discussed in section~\ref{sec:syntax}); arguments are
+(almost always) enclosed in braces, and neither of the forms of
+argument provision promulgated by the `plain' macros
+(\cs{macro}\meta{argument}\linebreak[0]\cs{endmacro} and
+\cs{macro * }\meta{argument}\verb| *|) are provided by the \LaTeX{}
+classes.
+
+%\EdNote[Should I mention the lack of \cs{every*} token registers (for
+%all sorts of instances of \texttt{*}?)]
+
+\SetBibJustification{\raggedright}
+\bibliography{tubguide}
+
+\makesignature
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/tugboat/ltubguid.pdf b/Master/texmf-dist/doc/latex/tugboat/ltubguid.pdf
new file mode 100644
index 00000000000..5211b28f836
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tugboat/ltubguid.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/tugboat/tugboat.pdf b/Master/texmf-dist/doc/latex/tugboat/tugboat.pdf
new file mode 100644
index 00000000000..4d327cd84c1
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tugboat/tugboat.pdf
Binary files differ