skrapport (25jun13)

git-svn-id: svn://tug.org/texlive/trunk@30942 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 45 insertions, 1790 deletions

diff --git a/Master/texmf-dist/doc/latex/skrapport/README b/Master/texmf-dist/doc/latex/skrapport/README
new file mode 100644
index 00000000000..92f3c99ab0d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/skrapport/README
@@ -0,0 +1,45 @@
+%% skrapport Skånings rapportklass
+%%
+%% Copyright (C) 2012-2013 by Simon Sigurdhsson <sigurdhsson@gmail.com>
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status `maintained'.
+%% 
+%% The Current Maintainer of this work is Simon Sigurdhsson.
+%% 
+%% This work consists of the file skrapport.tex and the derived files:
+%%  * skrapport.cls
+%%  * skrapport-colortheme-default.sty
+%%  * skrapport-colortheme-unscathed.sty
+%%  * skrapport-colortheme-violet.sty
+%%  * skrapport-colortheme-cruelwater.sty
+%%  * skrapport-colortheme-skdoc.sty
+%%  * skrapport-size-common.sty
+%%  * skrapport-size10pt.clo
+%%  * skrapport-size11pt.clo
+%%  * skrapport-size12pt.clo
+
+This is version 0.12a of the skrapport document class, intended for simple
+reports submitted by the author at Chalmers University of Technology.
+
+The following files are enclosed.
+
+  README        - This file
+  Makefile      - GNU Makefile for making the package and documentation
+  skrapport.tex - LaTeX source code of the class and documentation
+  skrapport.pdf - PDF version of the documentation
+
+Installation notes:
+The easiest way to install this package, assuming you have obtained the
+source code from Github or CTAN, is to simply run `make install`. This
+will generate package code and documentation, install it into TEXMFHOME
+and run `mktexlsr`. If you wish to compile the package but not install
+it, run `make all` instead. If you insist on doing it manually, remember
+that you must use `pdflatex` (not `tex` or `latex`).
diff --git a/Master/texmf-dist/doc/latex/skrapport/skrapport.pdf b/Master/texmf-dist/doc/latex/skrapport/skrapport.pdf
index f23e632c343..bb78e6b57b2 100644
--- a/Master/texmf-dist/doc/latex/skrapport/skrapport.pdf
+++ b/Master/texmf-dist/doc/latex/skrapport/skrapport.pdf
diff --git a/Master/texmf-dist/doc/latex/skrapport/skrapport.tex b/Master/texmf-dist/doc/latex/skrapport/skrapport.tex
deleted file mode 100644
index c9b6bc8ad65..00000000000
--- a/Master/texmf-dist/doc/latex/skrapport/skrapport.tex
+++ /dev/null
@@ -1,1790 +0,0 @@
-%% chscite Skånings rapportklass
-%%
-%% Copyright (C) 2012 by Simon Sigurdhsson <sigurdhsson@gmail.com>
-%% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
-%% 
-%% This work has the LPPL maintenance status `maintained'.
-%% 
-%% The Current Maintainer of this work is Simon Sigurdhsson.
-%% 
-%% This work consists of the file skrapport.tex and the 
-%% derived files skrapport.cls, skrapport-colortheme-default.sty,
-%% skrapport-colortheme-unscathed.sty, skrapport-colortheme-violet.sty
-%% and skrapport-colortheme-cruelwater.sty.
-\documentclass{skdoc}
-\usepackage{hologo,booktabs}
-\usepackage[style=authoryear]{biblatex}
-\usepackage{csquotes}
-%\usepackage{chslacite}
-
-% Hide the implementation
-\OnlyDescription
-
-% Bibliography entries
-\begin{filecontents}{skrapport.bib}
-    @article{kpfonts,
-        author = {Christophe Caignaert},
-        title = {KP-Fonts 3.31},
-        year = {2010},
-        url = {http://www.tex.ac.uk/tex-archive/fonts/kpfonts/doc/kpfonts.pdf}
-    }
-\end{filecontents}
-\addbibresource{skrapport.bib}
-
-% Declare the target files
-\SelfPreambleTo{\mypreamble}
-\DeclareFile[key=class,preamble=\mypreamble]{skrapport.cls}
-\DeclareFile[key=theme-default,preamble=\mypreamble]%
-    {skrapport-colortheme-default.sty}
-\DeclareFile[key=theme-unscathed,preamble=\mypreamble]%
-    {skrapport-colortheme-unscathed.sty}
-\DeclareFile[key=theme-cruelwater,preamble=\mypreamble]%
-    {skrapport-colortheme-cruelwater.sty}
-\DeclareFile[key=theme-violet,preamble=\mypreamble]%
-    {skrapport-colortheme-violet.sty}
-
-% This is where the documentation begins
-\begin{document}
-    % Change & version info
-    \version{0.10b}
-    \changes{0.01}{Initial version}
-    \changes{0.03}{Removed \cs{rd} and \cs{id}}
-    \changes{0.04}{Added \pkg{microtype} package}
-    \changes{0.05}{Improved documentation}
-    \changes{0.06}{Corrected cheksum, further improved documentation}
-    \changes{0.07}{Various bugfixes, \hologo{XeLaTeX} compatibility, 
-                    better float settings, quote style fix,
-                    \opt{intlimits} option to \pkg{amsmath}}
-    \changes{0.07a}{Fixed \pkg{kpfonts} issues}
-    \changes{0.09}{Introduced \pkg{kvoptions},
-                    fixed abstract in twocolumn mode}
-    \changes{0.10}{Include skmath if exists
-                    and wanted. Gobble optional arguments to
-                    \env{figure} and \env{table} in two-column mode.}
-    \changes{0.10a}{Include \pkg{xparse} (fixes breakage).}
-
-    % Metadata
-    \package[ctan=skbundle,vcs=https://github.com/urdh/skrapport]{skrapport}
-    \title{The \textbf{\thepackage} document class}
-    \author{Simon Sigurdhsson}
-    \email{sigurdhsson@gmail.com}
-
-    % First page
-    \maketitle
-    \begin{abstract}
-        A document class intended for simple documents \emph{e.g.}
-        reports handed in to courses and such. It is small,
-        straightforwars and heavily inspired by the Prac\TeX{}
-        Journal style.
-    \end{abstract}
-    \tableofcontents
-
-    \section{Documentation}
-    \subsection{Loading the class}
-    The document class is loaded using \cs{documentclass} as usual,
-    but it has a bunch of options that you might want to know about.
-
-    \subsubsection{Compatibility options}
-    There are a couple of options that are mostly provided for
-    compatibility with the standard \LaTeXe\ document classes. These
-    will do exactly the same thing they do in the standard classes,
-    although they may differ in default value. Although some of these
-    are key-value options, for compatibility their valid values may
-    also be passed as keys.
-
-    \Options{paper}\WithValues{a4paper, a5paper}\AndDefault{a4paper}
-    Specifying paper size is possible using the \opt{paper} option
-    (the values of which are based
-    on European paper sizes; use the \pkg{geometry} package for other
-    standards). Only A4 and A5 are defined since these two sizes cover
-    pretty much all intended use of the class. \opt{a4paper} is the
-    default value of this option, and the only other valid value is
-    \opt{a5paper}.
-
-    \Options{ptsize}\WithValues{10pt, 11pt, 12pt}\AndDefault{11pt}
-    The same font sizes specified in the standard classes are also
-    available in \thepackage\ (\emph{i.e.} \opt{10pt},
-    \opt{11pt} and \opt{12pt}. The default font size is
-    \opt{11pt}, and there should be no compelling reason to change
-    this.
-
-    \Options{draft,final}
-    The \opt{draft} and \opt{final} options work as expected, triggering
-    or untriggering the familiar draft mode. The default is \opt{final}.
-
-    \Options{fleqn,leqno}
-    Purely for compatibility \thepackage\ also defines the \opt{fleqn}
-    and \opt{leqno} options. As with the standard \LaTeXe\ classes,
-    \opt{fleqn} aligns equations with the left-hand margin and
-    \opt{leqno} places equation numbers to the left. None of these
-    are activated by default.
-
-    \subsubsection{Typographic options}
-    There is also a number of options available to change certain
-    aspects of the typography of the typeset document.
-
-    \Options{titles}\WithValues{rm, bf, sf}\AndDefault{rm}
-    There are three different ways to typeset section headings in
-    \thepackage: \texttt{rm} (upright serif), \texttt{bf} (boldfaced
-    serif) and \texttt{sf} (sans serif). The default is \texttt{rm}.
-
-    \Options{font}\WithValues{nofont, lmodern, palatino, kpfonts}\AndDefault{kpfonts}
-    In addition, the specific font can also be changed --- the available
-    choices are \texttt{lmodern} (Latin Modern), \texttt{kpfonts}
-    (Kp-Fonts) and \texttt{palatino} (either \TeX-Gyre Pagella or
-    Pazo Math depending on what's available), with the default being
-    \texttt{kpfonts}. It is also possible to tell \thepackage\ not
-    to use any font (\texttt{nofont}), which is sometimes useful
-    when using \hologo{XeLaTeX}, among other things.
-
-    \Options{indent,noindent}
-    Controlling indentation is posible using the options
-    \texttt{(no)indent}. The default, \texttt{noindent}, behaves
-    much like the \pkg{parskip} package in that it replaces
-    paragraph indentation with vertical spacing.
-
-    \Options{onecolumn,twocolumn}
-    Similar to the options available in the standard classes, these
-    options specify wether to typeset the document in one or two
-    columns. Unlike the standard classes, the two-column mode is
-    implemented using \pkg{multicol}. The default is \opt{onecolumn}.
-
-    \subsubsection{Other options}
-    \Options{swe,eng}
-    Either \pkg{babel} or \pkg{polyglossia} (depending on engine) is
-    loaded by the package. These options specify what language should
-    be used as the main language (swedish or english); both languages
-    are always loaded. The default is \opt{swe}.
-
-    \Options{color,nocolor}
-    It is also possible to load \pkg{xcolor} inside the package. If
-    this is done, a range of color themes (discussed later) will be
-    available in the package and these will affect the document. The
-    default value is \opt{nocolor}.
-
-    \Options{math,nomath}
-    Loading the \pkg{skmath} package is recommended and as such it is
-    loaded by default. If this for some reason is undesirable, the
-    \opt{nomath} option will supress this behaviour.
-
-    \subsection{Macros and environments}
-    In general, the class defines the same macros as the \pkg{article} class, and adds a few. Only the novel ones are described here, as
-    the inherited ones should behave identically.
-
-    \subsubsection{Front-matter and metadata}
-    \DescribeMacro\license{<license>}
-    The \cs{license} macro specifies the name of a license under which
-    the document is available. This will be typeset on the lower right
-    corner of the title page.
-
-    \DescribeMacro\regarding{<text>}
-    The class adds a \cs{regarding} macro, which is used like the 
-    standard \cs{author} and \cs{title} macros and should be given an 
-    accurate but short description of the purpose of the report (i.e.
-    ~course name or similar). This is printed along with the date on 
-    the top of the title/first page.
-
-    \DescribeMacro\author[<email>]{<author>}
-    The \cs{author} macro is redefined in two ways. To begin with, the
-    macro now acceps an optional argument specifying the email address
-    of the author. If the macro is used multiple times, authors are
-    appended to the list of author names displayed by \cs{maketitle}.
-
-    \DescribeMacro\maketitle
-    The title page (or rather, block) has been refashioned to mimic the
-    Prac\TeX\ Journal style. This means a fairly compact block, starting
-    with a line of text containing the date and subject matter, followed
-    by a large skip and then the title, author and optionally an
-    abstract set ragged-right and fairly close together.
-
-    \subsubsection{Useful macros}
-    The class defines a few additional macros that aren't available in
-    \pkg{article} but don't fit in any specifiv \enquote{set} of
-    features. These include commands to typeset comments.
-
-    \DescribeMacro\comment*{<comment>}
-    \DescribeMacro\com*{<comment>}
-    \DescribeMacro\note*{<comment>}
-    The \cs{comment} macro (also available in an unstarred variant)
-    typesets a comment. The starred variant typesets the commen in red
-    prefixed by the word \enquote{Comment}, while the unstarred variant
-    typesets the comment as a margin note (but still prefixed). The
-    \cs{com} and \cs{note} macros are aliases of \cs{comment}.
-
-    \subsubsection{Two-column mode}
-    \DescribeEnv[<content>]{onecol}
-    In \opt{twocolumn} mode, the package defines an environment
-    \env{onecol} which typesets its contents in a single column. 
-    Additionally, it redefines \env{figure} and \env{table} as
-    non-floats, leaving the starred versions intact.
-
-    \subsubsection{Color themes}
-    \DescribeMacro\colortheme{<theme>}
-    If the package is loaded with the \opt{color} option, changing the color theme is
-    possible using \cs{colortheme}, which loads an
-    appropriate package. At the moment, four color themes are available.
-
-    \Theme{default}
-    The \thm{default} theme is fairly conservative, only coloring
-    \pkg{hyperef} links with more readable, slightly darker colors than
-    the standard ones. It should print well even on non-color printers.
-
-    \Theme{unscathed}
-    The \thm{unscathed} theme is based on a palette with the same
-    name on COLOURlovers%
-\footnote{\url{http://www.colourlovers.com/palette/1440498/unscathed}},
-    and applies a \textcolor[HTML]{463335}{dark brown} color to
-    emphasized text, a \textcolor[HTML]{CF5D3B}{rusty} color to links,
-    a \textcolor[HTML]{B34430}{darker rust} color to titles and a
-    \textcolor[HTML]{70524A}{lighter brown} to quotes.
-
-    \Theme{cruelwater}
-    The \thm{cruelwater} theme is also based on a palette from 
-    COLOURlovers%
-\footnote{\url{http://www.colourlovers.com/palette/126030/Cruel_Water_at_Night}},
-    and applies a \textcolor[HTML]{030C22}{dark blue} color to bold
-    text and captions, a \textcolor[HTML]{20293F}{slightly less dark 
-    blue} to titles and emphasized text, a \textcolor[HTML]{A9B0B3}{
-    light gray} color to small print and a \textcolor[HTML]{404749}{
-    darker gray} to quotes.
-
-    \Theme{violet}
-    The \thm{violet} theme, like \thm{unscathed} and \thm{cruelwater},
-    is based on a COLOURlovers palette%
-\footnote{\url{http://www.colourlovers.com/palette/1831303/Violet_White_Bedrm}}.
-    It colors all links \textcolor[HTML]{932444}{bright purple}, applies
-    a \textcolor[HTML]{311A2A}{dark puple} color to titles, bold text
-    and captions, a \textcolor[HTML]{D6CBCF}{grayish purple} to small
-    print, a \textcolor[HTML]{463335}{dark brown} color to quotes and a
-    \textcolor[HTML]{98758D}{pastel violet} color to emphasized text.
-
-    \subsection{Additional information}
-    The document class includes a number of packages by default. This
-    is useful to know, since passing explicit options to these packages
-    will require you to utilize the \cs{PassOptionsToPackage} macro
-    before you load the class using \cs{documentclass}.
-    Table~\ref{tab:pkgs} lists the packages included by \thepkg\ along
-    with their options (if applicable).
-
-    \begin{table}[tbp]
-        \centering
-        \caption{User-level packages included by \thepkg.}
-        \label{tab:pkgs}
-        \begin{tabular}{llp{15em}}
-            \toprule
-            \textbf{Package} & \textbf{Options} & \textbf{Comments} \\
-            \midrule
-            \pkg{amsmath} & \texttt{intlimits} & Provides \hologo{AmS} commands and environments. \\
-            \pkg{amssymb} & & Only if not using \opt{kpfonts}.\\
-            \pkg{babel} & see options \opt{swe} and \opt{eng} & Only loaded if \emph{not} using \hologo{XeTeX}.\\
-            \pkg{calc} & & \\
-            \pkg{fontenc} & \texttt{T1} & Only loaded if \emph{not} using \hologo{XeTeX}. Makes sure we are using a good font encoding for crisp appearance on-screen (OT1 is horrible). \\
-            \pkg{fontspec} & \texttt{quiet} & Only loaded if using \hologo{XeTeX}. Provides basic OTF font selection commands.\\
-            \pkg{geometry} & \texttt{a4paper} or \texttt{a5paper} & This is used by the \opt{paper} option to set the paper area. \\
-            \pkg{icomma} & & \\
-            \pkg{microtype} & & Provides micro-typographic improvements.\\
-            \pkg{multicol} & & Only loaded with the \opt{twocolumn} option. \\
-            \pkg{polyglossia} & see options \opt{swe} and \opt{eng} & Only loaded if using \hologo{XeTeX}.\\
-            \pkg{skmath} & & Only if it exists and \opt{nomath} isn't set.\\
-            \pkg{textcomp} & & Only if not using \opt{kpfonts}.\\
-            \pkg{xcolor} & & Only loaded with the \opt{color} option.\\
-            \bottomrule
-        \end{tabular}
-    \end{table}
-
-    \subsection{Known issues}
-    A list of current issues is available in the Github repository of this
-    package\footnote{\url{https://github.com/urdh/skrapport/issues}}, but as
-    of the release of \theversion, there are only two known issues:
-    \begin{description}
-        \item[\#6]  When using the \opt{color} option, sometimes captions are
-                    uncolored. It seems that color only appears when the caption
-                    is long enough to break a line. It is unknown wether this is
-                    due to some error in \thepackage\ or something caused by
-                    \pkg{caption} (or another dependency).
-        \item[\#7]  As of a recent update to \pkg{xparse}, the \opt{twocolumn}
-                    option is broken. When loading \thepackage\ with that option,
-                    \pkg{xparse} emits a warning stating that \enquote{Argument
-                    specification for expandable command ends with optional
-                    argument}. Presumably this is because environments are now
-                    defined using expandable macros, whereas they weren't before.
-                    %It's a tricky one to solve while keeping the \env{figure} and
-                    %\env{table} environments API-compatible across \opt{onecolumn}
-                    %and \opt{twocolumn} documents.
-    \end{description}
-    If you discover any bugs in this package, please report them to the issue
-    tracker in the \thepackage\ Github repository.
-
-    \Implementation
-    \section{Implementation}
-    Start with the standard \LaTeX\ cruft.
-\begin{MacroCode}{class}
-\NeedsTeXFormat{LaTeX2e}[1995/12/01]
-\ProvidesClass{skrapport}%
-    [2013/01/09 v0.10a Skånings rapportklass]
-\end{MacroCode}
-    Then, start by including \pkg{kvoptions} and defining some
-    variables for future use.
-\begin{MacroCode}{class}
-\RequirePackage{xparse,xstring}
-\RequirePackage{kvoptions}
-\SetupKeyvalOptions{family=skrapport,prefix=skrapport@}
-\newcommand\@ptsize{}
-\IfFileExists{ifxetex.sty}{%
-  \RequirePackage{ifxetex}%
-}{%
-  \newif\ifxetex\xetexfalse%
-}
-\end{MacroCode}
-
-    \subsection{Options}
-    \begin{option}{paper}{a4paper, a5paper}
-    \begin{option}{a4paper}
-    \begin{option}{a5paper}
-    Declare the paper size options.
-\begin{MacroCode}{class}
-\DeclareStringOption[a4paper]{paper}
-\DeclareVoidOption{a4paper}{\skrapport@SetupPaper}
-\DeclareVoidOption{a5paper}{\skrapport@SetupPaper}
-\newcommand*{\skrapport@SetupPaper}{\expandafter\@skrapport@SetupPaper\expandafter{\CurrentOption}}
-\newcommand*{\@skrapport@SetupPaper}[1]{\setkeys{skrapport}{paper={#1}}}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-    \end{option}
-
-    \begin{option}{ptsize}{10pt, 11pt, 12pt}
-    \begin{option}{10pt}
-    \begin{option}{11pt}
-    \begin{option}{12pt}
-    Declare point size options.
-\begin{MacroCode}{class}
-\DeclareStringOption[11pt]{ptsize}
-\DeclareVoidOption{10pt}{\skrapport@SetupPtsize}
-\DeclareVoidOption{11pt}{\skrapport@SetupPtsize}
-\DeclareVoidOption{12pt}{\skrapport@SetupPtsize}
-\newcommand*{\skrapport@SetupPtsize}{\expandafter\@skrapport@SetupPtsize\expandafter{\CurrentOption}}
-\newcommand*{\@skrapport@SetupPtsize}[1]{\setkeys{skrapport}{ptsize={#1}}}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-    \end{option}
-    \end{option}
-
-    \begin{option}{twocolumn}
-    \changes{0.08}{Added option \opt{twocolumn}}
-    \begin{option}{onecolumn}
-    Declare column options.
-\begin{MacroCode}{class}
-\DeclareBoolOption[false]{twocolumn}
-\DeclareComplementaryOption{onecolumn}{twocolumn}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-
-    \begin{option}{draft}
-    \begin{option}{final}
-    Declare \opt{draft} and \opt{final} options.
-\begin{MacroCode}{class}
-\DeclareBoolOption[false]{draft}
-\DeclareComplementaryOption{final}{draft}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-
-
-    Declare the \opt{fleqn} and \opt{leqno} options for
-    compatibility with the \pkg{article} class.
-    \begin{option}{leqno}
-\begin{MacroCode}{class}
-\DeclareBoolOption[false]{leqno}
-\end{MacroCode}
-    \end{option}
-    \begin{option}{fleqn}
-\begin{MacroCode}{class}
-\DeclareBoolOption[false]{fleqn}
-\end{MacroCode}
-    \end{option}
-
-    \begin{option}{titles}{rm, bf, sf}
-    Declare options for section titles.
-    \begin{option}{rmtitles}
-    \begin{option}{bftitles}
-    \begin{option}{sftitles}
-    \changes{0.09}{Added \opt{sftitles} option}
-\begin{MacroCode}{class}
-\DeclareStringOption[rm]{titles}
-\DeclareVoidOption{rmtitles}{\skrapport@SetupTitles}
-\DeclareVoidOption{bftitles}{\skrapport@SetupTitles}
-\DeclareVoidOption{sftitles}{\skrapport@SetupTitles}
-\newcommand*{\skrapport@SetupTitles}{\expandafter\@skrapport@SetupTitles\expandafter{\CurrentOption}}
-\newcommand*{\@skrapport@SetupTitles}[1]{%
-    \IfStrEq{#1}{bftitles}{%
-        \setkeys{skrapport}{titles={bf}}%
-    }{\IfStrEq{#1}{sftitles}{%
-        \setkeys{skrapport}{titles={sf}}%
-    }{
-        \setkeys{skrapport}{titles={rm}}%
-    }}}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-    \end{option}
-    \end{option}
-
-    \begin{option}{swe}
-    \begin{option}{eng}
-    Declare options for swedish/english \pkg{babel} or
-    \pkg{polyglossia} support.
-\begin{MacroCode}{class}
-\DeclareBoolOption[false]{eng}
-\DeclareComplementaryOption{swe}{eng}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-
-    \begin{option}{font}{nofont, kpfonts, lmodern, palatino}
-    Declare font options.
-    \begin{option}{kpfonts}
-    \changes{0.07}{Added option \opt{kpfonts}, set as default
-                    option for fonts}
-    \begin{option}{lmodern}
-    \begin{option}{palatino}
-    \begin{option}{nofont}
-\begin{MacroCode}{class}
-\DeclareStringOption[kpfonts]{font}
-\DeclareVoidOption{kpfonts}{\skrapport@SetupFont}
-\DeclareVoidOption{lmodern}{\skrapport@SetupFont}
-\DeclareVoidOption{palatino}{\skrapport@SetupFont}
-\DeclareVoidOption{nofont}{\skrapport@SetupFont}
-\newcommand*{\skrapport@SetupFont}{\expandafter\@skrapport@SetupFont\expandafter{\CurrentOption}}
-\newcommand*{\@skrapport@SetupFont}[1]{\setkeys{skrapport}{font={#1}}}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-    \end{option}
-    \end{option}
-    \end{option}
-
-    \begin{option}{indent}
-    \changes{0.02}{Added option of indented paragraphs}
-    \begin{option}{noindent}
-    Declare indentation options.
-\begin{MacroCode}{class}
-\DeclareBoolOption[false]{indent}
-\DeclareComplementaryOption{noindent}{indent}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-
-    \begin{option}{color}
-    \changes{0.09}{Added \opt{color} option}
-    \begin{option}{nocolor}
-    Declare color options.
-\begin{MacroCode}{class}
-\DeclareBoolOption[true]{color}
-\DeclareComplementaryOption{nocolor}{color}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-
-    \begin{option}{math}
-    \begin{option}{nomath}
-    Declare math options.
-\begin{MacroCode}{class}
-\DeclareBoolOption[true]{math}
-\DeclareComplementaryOption{nomath}{math}
-\end{MacroCode}
-    \end{option}
-    \end{option}
-
-    Execute default options and process given options.
-\begin{MacroCode}{class}
-\ProcessKeyvalOptions*
-\end{MacroCode}
-
-    \subsection{Loading packages}
-    \subsubsection{Optional packages}
-    Require packages as per given options. Start with the paper size.
-\begin{MacroCode}{class}
-\IfStrEq{\skrapport@paper}{a4paper}{%
-    \RequirePackage[a4paper]{geometry}
-    \setlength\paperheight {297mm}
-    \setlength\paperwidth  {210mm}
-}{\IfStrEq{\skrapport@paper}{a5paper}{%
-    \RequirePackage[a5paper]{geometry}
-    \setlength\paperheight {210mm}
-    \setlength\paperwidth  {148mm}
-}{%
-    \ClassError{skrapport}{%
-        Option `paper' has unknown value `\skrapport@paper'!
-    }{} 
-}}
-\end{MacroCode}
-
-    \begin{macro}{\@ptsize}
-    Follow up with the point size.
-\begin{MacroCode}{class}
-\IfStrEq{\skrapport@ptsize}{10pt}{%
-    \renewcommand\@ptsize{0}
-}{%
-    \IfStrEq{\skrapport@ptsize}{11pt}{%
-        \renewcommand\@ptsize{1}
-    }{%
-        \IfStrEq{\skrapport@ptsize}{12pt}{%
-            \renewcommand\@ptsize{2}
-        }{%
-            \ClassError{skrapport}{%
-                Option `ptsize' has unknown value `\skrapport@ptsize'!
-            }{}
-        }
-    }
-}
-\end{MacroCode}
-    \end{macro}
-
-    Setting \opt{draft} mode is fairly easy, we only need
-    \cs{overfullrule}s.
-\begin{MacroCode}{class}
-\ifskrapport@draft
-    \setlength\overfullrule{5pt}
-\else
-    \setlength\overfullrule{0pt}
-\fi
-\end{MacroCode}
-
-    Load \file{leqno.clo} and \file{fleqno.clo} if those options are desired.
-\begin{MacroCode}{class}
-\ifskrapport@leqno\input{leqno.clo}\fi
-\ifskrapport@fleqn\input{fleqn.clo}\fi
-\end{MacroCode}
-
-    \begin{macro*}{\@titstyle}
-    Set the title font as prescribed.
-\begin{MacroCode}{class}
-\IfStrEq{\skrapport@titles}{bf}{%
-    \let\@titstyle\bfseries%
-}{\IfStrEq{\skrapport@titles}{sf}{%
-    \let\@titstyle\sffamily\bfseries%
-}{%
-    \let\@titstyle\relax%
-}}
-\end{MacroCode}
-    \end{macro*}
-
-    Now things get tricky. If we are using \hologo{XeTeX}, we don't
-    want \pkg{fontenc} because it makes no sense. We \emph{do} want
-    \pkg{fontspec}, though, because we want to be able to specify
-    fonts. We also include a \cs{nobreakspace} macro which seems to
-    be broken in \hologo{XeTeX}.
-\begin{MacroCode}{class}
-\ifxetex
-  \RequirePackage[quiet]{fontspec}
-\end{MacroCode}
-    \begin{macro}{\nobreakspace}
-\begin{MacroCode}{class}
-    \DeclareRobustCommand\nobreakspace{\leavevmode\nobreak\space}
-\end{MacroCode}
-    \end{macro}
-\begin{MacroCode}{class}
-\else
-  \RequirePackage[T1]{fontenc}  
-\fi
-\end{MacroCode}
-
-    The \opt{color} option requires both \pkg{etoolbox} and
-    \pkg{xcolor} to be loaded.
-\begin{MacroCode}{class}
-\ifskrapport@color
-    \RequirePackage{etoolbox}
-    \RequirePackage{xcolor}
-\fi
-\end{MacroCode}
-
-    We also need to handle the \opt{font} option. Note that we only
-    load \pkg{tpagella} if it exists, and fall back to \pkg{mathpazo}
-    otherwise.
-\begin{MacroCode}{class}    
-\IfStrEq{\skrapport@font}{nofont}{}{%
-    \IfStrEq{\skrapport@font}{kpfonts}{%
-        \RequirePackage[easyscsl,intlimits,sumlimits]{kpfonts}
-    }{%
-        \IfStrEq{\skrapport@font}{palatino}{%
-            \IfFileExists{tgpagella.sty}{%
-                \RequirePackage{tgpagella}
-            }{%
-                \RequirePackage[sc]{mathpazo}
-            }
-        }{%
-            \IfStrEq{\skrapport@font}{lmodern}{%
-                \RequirePackage{lmodern}
-            }{%
-                \ClassError{skrapport}{%
-                    Option `font' has unknown value `\skrapport@font'!
-                }{}
-            }
-        }
-    }
-}
-\end{MacroCode}
-
-    Language options follow. It it a bit convoluted since we load
-    \pkg{polyglossia} in \hologo{XeTeX} and \pkg{babel} in \TeX,
-    but it's fairly easy to follow.
-\begin{MacroCode}{class}
-\ifxetex
-    \RequirePackage{xkeyval}
-    \RequirePackage{polyglossia}
-    \ifskrapport@eng
-        \setmainlanguage[variant=british]{english}
-        \setotherlanguage{swedish}
-    \else
-        \setmainlanguage{swedish}
-        \setotherlanguage[variant=british]{english}
-    \fi
-\else
-    \ifskrapport@eng
-        \RequirePackage[swedish,british]{babel}
-    \else
-        \RequirePackage[british,swedish]{babel}
-    \fi
-\fi
-\end{MacroCode}
-
-    Two-column mode requires \pkg{etoolbox} and \pkg{multicol}.
-\begin{MacroCode}{class}
-\ifskrapport@twocolumn
-    \RequirePackage{etoolbox}
-    \RequirePackage{multicol}
-\fi
-\end{MacroCode}
-
-    \subsubsection{Required packages}
-    We also include some essential packages per default. The
-    \pkg{calc} package, for instance, is essential in later
-    definitions.
-\begin{MacroCode}{class}
-\RequirePackage{calc}
-\end{MacroCode}
-
-    At the end of the class definition we load a couple of very
-    useful packages that improve typesetting. These are
-    \pkg{microtype}, \pkg{icomma} and \pkg{amsmath}. Additionally,
-    we load \pkg{skmath} if it exists and is wanted, and unless we
-    are using KP-Fonts, we load \pkg{amssymb} and \pkg{textcomp} (the
-    reason being that \pkg{kpfonts} load these packages itself, see
-    \textcite[p.~1]{kpfonts}, and we don't want conflicting options).
-\begin{MacroCode}{class}
-\AtEndOfClass{
-    \RequirePackage{microtype}
-    \RequirePackage{icomma}
-    \IfStrEq{\skrapport@font}{kpfonts}{}{\RequirePackage[intlimits]{amsmath}}
-    \let\Finv\relax
-    \let\Game\relax
-    \let\beth\relax
-    \let\gimel\relax
-    \let\daleth\relax
-    \IfStrEq{\skrapport@font}{kpfonts}{}{\RequirePackage{amssymb}}
-    \IfStrEq{\skrapport@font}{kpfonts}{}{\RequirePackage{textcomp}}
-    \ifskrapport@math\IfFileExists{skmath.sty}{\RequirePackage{skmath}}{}\fi
-}
-\end{MacroCode}
-    
-    When the document starts, we set the URL style if the user has
-    loaded the \pkg{url} package.
-\begin{MacroCode}{class}
-\AtBeginDocument{
-    \@ifundefined{urlstyle}{}{\urlstyle{same}}
-}
-\end{MacroCode}
-
-    Lastly, we include the correct point size \texttt{.clo} file from the
-    \pkg{article} class.
-\begin{MacroCode}{class}
-\input{size1\@ptsize.clo}
-\end{MacroCode}
-    
-    \subsection{Hidden things}
-    Set some default measurements.
-\begin{MacroCode}{class}
-\addtolength\textwidth{0.5\oddsidemargin}
-\addtolength\textwidth{0.5\evensidemargin}
-\addtolength\oddsidemargin{-0.5\oddsidemargin}
-\addtolength\evensidemargin{-0.5\evensidemargin}
-\setlength\lineskip{1\p@}
-\setlength\normallineskip{1\p@}
-\end{MacroCode}
-    \begin{macro}{\baselinestretch}
-\begin{MacroCode}{class}
-\renewcommand\baselinestretch{}
-\end{MacroCode}
-    \end{macro}
-
-    \subsubsection{Indentation}
-    Indentation code. Undo the indentation set by the \pkg{article} 
-    class if indentation was requested by the user. See the
-    \pkg{parskip} package for further information. Enable french
-    spacing as well.
-\begin{MacroCode}{class}
-\ifskrapport@indent\else
-    \setlength\parskip{0.5\baselineskip \@plus 2pt}
-    \parindent=\z@
-    \setlength\parfillskip{30\p@ \@plus 1fil}
-\end{MacroCode}
-    \begin{macro*}{\@listI}
-    \begin{macro*}{\@listi}
-\begin{MacroCode}{class}
-    \def\@listI{\leftmargin\leftmargini
-       \topsep\z@ \parsep\parskip \itemsep\z@}
-    \let\@listi\@listI
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-\begin{MacroCode}{class}
-    \@listi
-\end{MacroCode}
-    \begin{macro*}{\@listii}
-\begin{MacroCode}{class}
-    \def\@listii{\leftmargin\leftmarginii
-      \labelwidth\leftmarginii\advance\labelwidth-\labelsep
-      \topsep\z@ \parsep\parskip \itemsep\z@}
-\end{MacroCode}
-    \end{macro*}
-    \begin{macro*}{\@listiii}
-\begin{MacroCode}{class}
-    \def\@listiii{\leftmargin\leftmarginiii
-      \labelwidth\leftmarginiii\advance\labelwidth-\labelsep
-      \topsep\z@ \parsep\parskip \itemsep\z@}
-\end{MacroCode}
-    \end{macro*}
-\begin{MacroCode}{class}
-    \partopsep=\z@
-    \@ifundefined{CheckCommand}{}{%
-      \CheckCommand*{\@starttoc}[1]{%
-        \begingroup
-          \makeatletter
-          \@input{\jobname.#1}%
-          \if@filesw
-            \expandafter\newwrite\csname tf@#1\endcsname
-            \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
-          \fi
-          \@nobreakfalse
-        \endgroup}}
-\end{MacroCode}
-    \begin{macro*}{\@starttoc}
-\begin{MacroCode}{class}
-    \renewcommand*{\@starttoc}[1]{%
-      \begingroup
-        \makeatletter
-        \parskip\z@
-        \@input{\jobname.#1}%
-        \if@filesw
-          \expandafter\newwrite\csname tf@#1\endcsname
-          \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax
-        \fi
-        \@nobreakfalse
-      \endgroup}
-\end{MacroCode}
-    \end{macro*}
-\begin{MacroCode}{class}
-\fi
-\frenchspacing
-\end{MacroCode}
-
-    \subsubsection{Penalties}
-\begin{MacroCode}{class}
-\@lowpenalty   51
-\@medpenalty  151
-\@highpenalty 301
-\setcounter{topnumber}{2}
-\setcounter{bottomnumber}{1}
-\setcounter{totalnumber}{4}
-\setcounter{dbltopnumber}{2}
-\end{MacroCode}
-    \begin{macro*}{\topfraction}
-    \begin{macro*}{\bottomfraction}
-    \begin{macro*}{\textfraction}
-    \begin{macro*}{\floatpagefraction}
-    \begin{macro*}{\dbltopfraction}
-    \begin{macro*}{\dblfloatpagefraction}
-\begin{MacroCode}{class}
-\renewcommand\topfraction{.75}
-\renewcommand\bottomfraction{.5}
-\renewcommand\textfraction{.25}
-\renewcommand\floatpagefraction{.625}
-\renewcommand\dbltopfraction{.75}
-\renewcommand\dblfloatpagefraction{.625}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-
-    \subsection{User-level commands}
-    \subsubsection{The front page}
-    \begin{macro}{\author}
-    \changes{0.10b}{Improved \cs{author} macro}
-    The \cs{author} macro is redefined to accept an optional argument
-    and to be used multiple times.
-    \begin{macro*}{\skrapport@email}
-    The \cs{skrapport@email} helper macro typesets an email address
-    using \pkg{hyperref} if that package is used. This is suboptimal,
-    the macro behaves differently with respect to special characters
-    depending on wether \pkg{hyperref} is loaded or not.
-\begin{MacroCode}{class}
-\ProvideDocumentCommand\skrapport@email{m}{\texttt{#1}}
-\AtBeginDocument{
-    \@ifpackageloaded{hyperref}{%
-        \DeclareDocumentCommand\skrapport@email{m}{%
-            \href{mailto:#1}{\nolinkurl{#1}}%
-        }%
-    }{}%
-}
-\end{MacroCode}{class}
-    \end{macro*}
-    \begin{macro*}{\@author}
-\begin{MacroCode}{class}
-\def\@author{\relax}
-\DeclareDocumentCommand\author{om}{%
-    \def\skrapport@tempi{#2\IfNoValueTF{#1}{}{~$\langle$\skrapport@email{#1}$\rangle$}}
-    \if\@author\relax
-        \xdef\@author{\skrapport@tempi}
-    \else
-        \expandafter\gdef\expandafter\@author\expandafter{\@author\\[0.5ex]\skrapport@tempi}
-    \fi
-}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro}
-
-    \begin{macro}{\regarding}
-    This macro defines a variable used by \cs{maketitle} to insert a 
-    simple text into the header on the title page.
-    \begin{macro*}{\@regarding}
-\begin{MacroCode}{class}
-\def\@regarding{\relax}
-\newcommand{\regarding}[1]{\gdef\@regarding{#1}}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro}
-
-    \begin{macro}{\license}
-    \changes{0.07}{Added command \cs{license}}
-    This macro defines a variable used by \cs{maketitle} to insert a 
-    license into the footer on the titlepage.
-    \begin{macro*}{\@copyright}
-\begin{MacroCode}{class}
-\def\@copyright{\relax}
-\newcommand{\license}[1]{\gdef\@copyright{#1}}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro}
-
-    \begin{macro}{\maketitle}
-    The standard \cs{maketitle} command as taken from the \pkg{article}
-    class but with some basic restyling.
-\begin{MacroCode}{class}
-\let\@smallprintstyle\relax
-\newcommand\maketitle{\par%
-  \begingroup
-    \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
-    \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
-    \long\def\@makefntext##1{\parindent 1em\noindent%
-      \hb@xt@1.8em{\hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
-    \newpage
-    \global\@topnum\z@
-    \@maketitle
-    \thispagestyle{plain}\@thanks
-  \endgroup
-  \setcounter{footnote}{0}%
-}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro*}{\@maketitle}
-\begin{MacroCode}{class}
-\def\@maketitle{%
-  \newpage
-  \null
-  \begin{flushleft}%
-        \vspace{-\headsep}
-    {\small%
-      \@smallprintstyle
-      \if\@regarding\relax\else\@regarding{, }\fi%
-      \@date\par%
-    }%
-    \vspace{1.5cm}%
-    {\Huge\@titstyle\@title\par}%
-    \vspace{.125cm}%
-    {\Large\@titstyle\@author}%
-    \vspace{.75cm}%
-  \end{flushleft}%
-  \par%
-}
-\end{MacroCode}
-    \end{macro*}
-
-    \begin{environment}{abstract}
-    Standard restyled \env{abstract} environment from the
-    \pkg{article} class.
-\begin{MacroCode}{class}
-\newenvironment{abstract}{\newlength\skrapport@abstract@tw\newlength\skrapport@abstract@aw\settowidth{\skrapport@abstract@tw}{\bfseries\abstractname}\setlength{\skrapport@abstract@aw}{\the\textwidth-\the\skrapport@abstract@tw-1em}\begin{minipage}[t]{\skrapport@abstract@tw}\begin{flushright}\leavevmode\bfseries\abstractname\end{flushright}\end{minipage}\hspace{1em}\begin{minipage}[t]{\skrapport@abstract@aw}}{\end{minipage}}
-\end{MacroCode}
-    \end{environment}
-
-    \begin{environment}{titlepage}
-    Titlepage environment.
-    \begin{macro*}{\ps@skrapport@titlepage}
-\begin{MacroCode}{class}
-\newcommand\ps@skrapport@titlepage{\def\@oddhead{}\def\@evenhead{}\def\@oddfoot{\begin{minipage}{\textwidth}\raggedleft\small\par\@smallprintstyle\@copyright\end{minipage}}\let\@evenfoot\@oddfoot}
-\end{MacroCode}
-    \end{macro*}
-\begin{MacroCode}{class}
-\newenvironment{titlepage}{\cleardoublepage\setcounter{page}\@ne}{\thispagestyle{skrapport@titlepage}\cleardoublepage\setcounter{page}\@ne}
-\end{MacroCode}
-    \end{environment}
-
-    \subsubsection{Sectioning}
-    Sectioning commands.
-\begin{MacroCode}{class}
-\setcounter{secnumdepth}{3}
-\newcounter{section}
-\newcounter{subsection}[section]
-\newcounter{subsubsection}[subsection]
-\newcounter{paragraph}[subsubsection]
-\newcounter{subparagraph}[paragraph]
-\end{MacroCode}
-    \begin{macro*}{\thesection}
-    \begin{macro*}{\thesubsection}
-    \begin{macro*}{\thesubsubsection}
-    \begin{macro*}{\theparagraph}
-    \begin{macro*}{\thesubparagraph}
-\begin{MacroCode}{class}
-\renewcommand\thesection{\@arabic\c@section}
-\renewcommand\thesubsection{\thesection.\@arabic\c@subsection}
-\renewcommand\thesubsubsection{\thesubsection.\@arabic\c@subsubsection}
-\renewcommand\theparagraph{\thesubsubsection.\@arabic\c@paragraph}
-\renewcommand\thesubparagraph{\theparagraph.\@arabic\c@subparagraph}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \begin{macro}{\section}
-\begin{MacroCode}{class}
-\newcommand\section{\@startsection{section}{1}{\z@}%
-  {-4ex \@plus 1ex \@minus -1ex}%
-  {.5ex \@plus.5ex}%
-  {\normalfont\LARGE\@titstyle}}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\subsection}
-\begin{MacroCode}{class}
-\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
-  {-3ex \@plus 1ex \@minus -1ex}%
-  {.25ex \@plus.25ex}%
-  {\normalfont\Large\@titstyle}}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\subsubsection}
-\begin{MacroCode}{class}
-\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
-  {-2ex \@plus .5ex \@minus -.5ex}%
-  {.125ex \@plus.125ex}%
-  {\normalfont\large\@titstyle}}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\paragraph}
-\begin{MacroCode}{class}
-\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
-  {1ex \@plus .25ex \@minus -.25ex}%
-  {-1em}%
-  {\normalfont\normalsize\bfseries}}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\subparagraph}
-\begin{MacroCode}{class}
-\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
-  {1ex \@plus .25ex \@minus -.25ex}%
-  {-1em}%
-  {\normalfont\normalsize\itshape}}
-\end{MacroCode}
-    \end{macro}
-
-    \subsubsection{Commands from \pkg{article}}
-    Itemization commands.
-\begin{MacroCode}{class}
-\setlength\leftmargini{2em}
-\leftmargin\leftmargini
-\setlength\leftmarginii{2em}
-\setlength\leftmarginiii{1.5em}
-\setlength\leftmarginiv{1.5em}
-\setlength\leftmarginv{1em}
-\setlength\leftmarginvi{1em}
-\setlength\labelsep{.5em}
-\setlength\labelwidth{\leftmargini}
-\addtolength\labelwidth{-\labelsep}
-\@beginparpenalty -\@lowpenalty
-\@endparpenalty   -\@lowpenalty
-\@itempenalty     -\@lowpenalty
-\end{MacroCode}
-    \begin{macro*}{\theenumi}
-    \begin{macro*}{\theenumii}
-    \begin{macro*}{\theenumiii}
-    \begin{macro*}{\theenumiv}
-\begin{MacroCode}{class}
-\renewcommand\theenumi{\@arabic\c@enumi}
-\renewcommand\theenumii{\@alph\c@enumii}
-\renewcommand\theenumiii{\@roman\c@enumiii}
-\renewcommand\theenumiv{\@Alph\c@enumiv}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \begin{macro*}{\labelenumi}
-    \begin{macro*}{\labelenumii}
-    \begin{macro*}{\labelenumiii}
-    \begin{macro*}{\labelenumiv}
-\begin{MacroCode}{class}
-\newcommand\labelenumi{\theenumi.}
-\newcommand\labelenumii{\theenumii)}
-\newcommand\labelenumiii{\theenumiii.}
-\newcommand\labelenumiv{\theenumiv.}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \begin{macro*}{\p@enumii}
-    \begin{macro*}{\p@enumiii}
-    \begin{macro*}{\p@enumiiv}
-\begin{MacroCode}{class}
-\renewcommand\p@enumii{\theenumi}
-\renewcommand\p@enumiii{\theenumi(\theenumii)}
-\renewcommand\p@enumiv{\p@enumiii\theenumiii}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \begin{macro*}{\labelitemi}
-    \begin{macro*}{\labelitemii}
-    \begin{macro*}{\labelitemiii}
-    \begin{macro*}{\labelitemiv}
-\begin{MacroCode}{class}
-\newcommand\labelitemi{\textbullet}
-\newcommand\labelitemii{\textopenbullet}
-\newcommand\labelitemiii{\normalfont\bfseries\textendash}
-\newcommand\labelitemiv{\textrightarrow}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \begin{environment}{description}
-\begin{MacroCode}{class}
-\newenvironment{description}
-  {\list{}{\labelwidth\z@\itemindent-\leftmargin
-    \let\makelabel\descriptionlabel}}{\endlist}
-\newcommand*\descriptionlabel[1]{\hspace\labelsep\normalfont\bfseries #1}
-\end{MacroCode}
-    \end{environment}
-
-    Quotation environments.
-    \begin{environment}{quote}
-\begin{MacroCode}{class}
-\newenvironment{quote}{\list{}{\rightmargin\leftmargin}\item\relax\itshape}{\endlist}
-\end{MacroCode}
-    \end{environment}
-    \begin{environment}{quotation}
-\begin{MacroCode}{class}
-\newenvironment{quotation}{\bigskip\begin{quote}}{\end{quote}\bigskip}
-\end{MacroCode}
-    \end{environment}
-    \begin{environment}{verse}
-\begin{MacroCode}{class}
-\newenvironment{verse}{\begin{quote}}{\end{quote}}
-\end{MacroCode}
-    \end{environment}
-
-    \begin{macro}{\appendix}
-    Appendix macro.
-\begin{MacroCode}{class}
-\newcommand\appendix{\par\setcounter{section}{0}\setcounter{subsection}{0}\gdef\thesection{\@Alph\c@section}}
-\end{MacroCode}
-    \end{macro}
-
-    Old font commands.
-    \begin{macro}{\rm}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\sf}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\tt}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\bf}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\it}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\sl}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\sc}
-\begin{MacroCode}{class}
-\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
-\end{MacroCode}
-    \end{macro}
-
-    \begin{macro}{\emph}
-    Redefining the \cs{emph} style to be bold when nested.
-    \begin{macro*}{\em}
-\begin{MacroCode}{class}
-\let\@emstyle\relax
-\DeclareRobustCommand\em{%
-    \@nomath\em%
-    \ifdim \fontdimen\@ne\font >\z@%
-        \itshape\bfseries%
-    \else%
-        \itshape%
-    \fi%
-    \@emstyle%
-}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro}
-
-    \begin{macro*}{\footnoterule}
-    Footnote code.
-    \begin{macro*}{\@makefntext}
-\begin{MacroCode}{class}
-\renewcommand\footnoterule{%
-    \kern-3\p@
-    \hrule\@width.4\columnwidth
-    \kern2.6\p@}
-\newcommand\@makefntext[1]{%
-    \parindent 1em%
-    \noindent
-    \hb@xt@1.8em{\hss\@makefnmark}#1}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-
-    Basic translatable texts.
-    \begin{macro}{\contentsname}
-\begin{MacroCode}{class}
-\newcommand\contentsname{Innehåll}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\refname}
-\begin{MacroCode}{class}
-\newcommand\refname{Referenser}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\figurename}
-\begin{MacroCode}{class}
-\newcommand\figurename{Figur}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\tablename}
-\begin{MacroCode}{class}
-\newcommand\tablename{Tabell}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\appendixname}
-\begin{MacroCode}{class}
-\newcommand\appendixname{Bilaga}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\abstractname}
-\begin{MacroCode}{class}
-\newcommand\abstractname{Sammanfattning}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\today}
-\begin{MacroCode}{class}
-\def\today{\year--\month--\day}
-\end{MacroCode}
-    \end{macro}
-
-    \subsubsection{Floats}
-    Figure and table floats.
-\begin{MacroCode}{class}
-\setlength\arraycolsep{5\p@}
-\setlength\tabcolsep{6\p@}
-\setlength\arrayrulewidth{.4\p@}
-\setlength\doublerulesep{2\p@}
-\setlength\tabbingsep{\labelsep}
-\skip\@mpfootins=\skip\footins
-\setlength\fboxsep{3\p@}
-\setlength\fboxrule{.4\p@}
-\end{MacroCode}
-    \begin{macro*}{\theequation}
-\begin{MacroCode}{class}
-\renewcommand\theequation{\@arabic\c@equation}
-\end{MacroCode}
-    \end{macro*}
-\begin{MacroCode}{class}
-\newcounter{figure}\renewcommand\thefigure{\@arabic\c@figure}
-\def\fps@figure{tb}
-\def\ftype@figure{1}
-\def\ext@figure{lof}
-\def\fnum@figure{\figurename~\thefigure}
-\end{MacroCode}
-    \begin{environment}{figure}
-    \begin{environment*}{figure*}
-\begin{MacroCode}{class}
-\newenvironment{figure}{\@float{figure}}{\end@float}
-\newenvironment{figure*}{\@dblfloat{figure}}{\end@dblfloat}
-\end{MacroCode}
-    \end{environment*}
-    \end{environment}
-\begin{MacroCode}{class}
-\newcounter{table}\renewcommand\thetable{\@arabic\c@table}
-\def\fps@table{tb}
-\def\ftype@table{2}
-\def\ext@table{lot}
-\def\fnum@table{\tablename~\thetable}
-\end{MacroCode}
-    \begin{environment}{table}
-    \begin{environment*}{table*}
-\begin{MacroCode}{class}
-\newenvironment{table}{\@float{table}}{\end@float}
-\newenvironment{table*}{\@dblfloat{table}}{\end@dblfloat}
-\end{MacroCode}
-    \end{environment*}
-    \end{environment}
-
-    Captions.
-\begin{MacroCode}{class}
-\let\@captionstyle\relax
-\newlength\abovecaptionskip\setlength\abovecaptionskip{10\p@}
-\newlength\belowcaptionskip\setlength\belowcaptionskip{10\p@}
-\end{MacroCode}
-    \begin{macro*}{\@makecaption}
-\begin{MacroCode}{class}
-\long\def\@makecaption#1#2{%
-    \vskip\abovecaptionskip
-    \sbox\@tempboxa{\small{\bfseries#1:} \itshape#2}%
-    \ifdim \wd\@tempboxa >\hsize
-        \small{\bfseries\@captionstyle#1:} \itshape#2\par
-    \else
-        \global \@minipagefalse
-        \hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
-    \fi
-    \vskip\belowcaptionskip}
-\end{MacroCode}
-    \end{macro*}
-
-    \subsubsection{Table of contents}
-\begin{MacroCode}{class}
-\newcommand\@pnumwidth{1.55em}
-\newcommand\@tocrmarg{2em}
-\newcommand\@dotsep{1.7}
-\setcounter{tocdepth}{5}
-\end{MacroCode}
-    \begin{macro}{\tableofcontents}
-\begin{MacroCode}{class}
-\newcommand\tableofcontents{%
-  \section*{\contentsname
-    \@mkboth{\MakeUppercase\contentsname}{\MakeUppercase\contentsname}
-  }%
-    \vskip\baselineskip%
-  \@starttoc{toc}%
-}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro*}{\l@section}
-    \begin{macro*}{\l@subsection}
-    \begin{macro*}{\l@subsubsection}
-    \begin{macro*}{\l@paragraph}
-    \begin{macro*}{\l@subparagraph}
-\begin{MacroCode}{class}
-\newcommand*\l@section{\@dottedtocline{1}{0em}{1.3em}}
-\newcommand*\l@subsection{\@dottedtocline{2}{1.3em}{2em}}
-\newcommand*\l@subsubsection{\@dottedtocline{3}{3.3em}{3.15em}}
-\newcommand*\l@paragraph{\@dottedtocline{4}{6.45em}{4.15em}}
-\newcommand*\l@subparagraph{\@dottedtocline{5}{10.6em}{5.15em}}
-\end{MacroCode}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-    \end{macro*}
-
-    Fix for \emph{e.g.}~\pkg{tocloft} package.
-\begin{MacroCode}{class}
-\let\l@figure\@empty
-\let\l@table\@empty
-\end{MacroCode}
-
-    \subsubsection{Basic bibliography support}
-\begin{MacroCode}{class}
-\newdimen\bibindent
-\setlength\bibindent{2em}
-\end{MacroCode}
-    \begin{environment}{thebibliography}
-\begin{MacroCode}{class}
-\newenvironment{thebibliography}[1]
-    {\section*{\refname}%
-        \@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}%
-        \list{\@biblabel{\@arabic\c@enumiv}}%
-            {\settowidth\labelwidth{\@biblabel{#1}}%
-                \leftmargin\labelwidth
-                \advance\leftmargin\labelsep
-                \@openbib@code
-                \usecounter{enumiv}%
-                \let\p@enumiv\@empty
-                \renewcommand\theenumiv{\@arabic\c@enumiv}}%
-        \sloppy
-        \clubpenalty4000
-        \@clubpenalty \clubpenalty
-        \widowpenalty4000}%
-    {\def\@noitemerr
-        {\@latex@warning{Empty ‘thebibliography’ environment}}%
-        \endlist}
-\end{MacroCode}
-    \end{environment}
-    \begin{macro*}{\newblock}
-\begin{MacroCode}{class}
-\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
-\end{MacroCode}
-    \end{macro*}
-\begin{MacroCode}{class}
-\let\@openbib@code\@empty
-\end{MacroCode}
-    \begin{environment}{theindex}
-\begin{MacroCode}{class}
-\newenvironment{theindex}
-    {\twocolumn[\section*{\indexname}]%
-        \@mkboth{\MakeUppercase\indexname}%
-            {\MakeUppercase\indexname}%
-        \thispagestyle{plain}\parindent\z@
-        \parskip\z@ \@plus .3\p@\relax
-        \columnseprule \z@
-        \columnsep 35\p@
-        \let\item\@idxitem}
-    {\onecolumn}
-\end{MacroCode}
-    \end{environment}
-    \begin{macro*}{\@idxitem}
-\begin{MacroCode}{class}
-\newcommand\@idxitem{\par\hangindent 40\p@}
-\end{MacroCode}
-    \end{macro*}
-    \begin{macro}{\subitem}
-\begin{MacroCode}{class}
-\newcommand\subitem{\@idxitem \hspace*{20\p@}}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\subsubitem}
-\begin{MacroCode}{class}
-\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro*}{\indexspace}
-\begin{MacroCode}{class}
-\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
-\end{MacroCode}
-    \end{macro*}
-
-    \subsubsection{Two-column mode}
-    The twocolumn hacks implemented.
-\begin{MacroCode}{class}
-\ifskrapport@twocolumn
-    \AtBeginDocument{
-\end{MacroCode}
-    We include the \pkg{grid} package in two-column mode, because
-    it looks way better that way.
-\begin{MacroCode}{class}
-        \IfStrEq{\skrapport@paper}{a4paper}
-            {\def\@@@lines{40}}{\def\@@@lines{28}}
-        \IfStrEq{\skrapport@ptsize}{10pt}{
-            \RequirePackage[fontsize=10pt,%
-                            baseline=12pt,%
-                            lines=\@@@lines]{grid}
-        }{
-            \IfStrEq{\skrapport@ptsize}{11pt}{
-                \RequirePackage[fontsize=11pt,%
-                                baseline=13.2pt,%
-                                lines=\@@@lines]{grid}
-            }{
-                \RequirePackage[fontsize=12pt,%
-                                baseline=14.4pt,%
-                                lines=\@@@lines]{grid}
-            }   
-        }
-\end{MacroCode}
-    Now, we patch commands. First up is \env{abstract}.
-\begin{MacroCode}{class}
-        \renewenvironment{abstract}{\section*{\abstractname}}{}
-\end{MacroCode}
-    Then \env{document} and \cs{maketitle}.
-\begin{MacroCode}{class}
-        \AfterEndPreamble{\begin{multicols}{2}}
-        \AtEndDocument{\end{multicols}}
-        \pretocmd{\maketitle}{\end{multicols}}{}{}
-        \apptocmd{\maketitle}{\begin{multicols}{2}}{}{}
-\end{MacroCode}
-    Always typeset \env{equation} and friends outside the grid:
-\begin{MacroCode}{class}
-        \BeforeBeginEnvironment{equation}{\begin{gridenv}}
-        \AfterEndEnvironment{equation}{\end{gridenv}}
-        \BeforeBeginEnvironment{equation*}{\begin{gridenv}}
-        \AfterEndEnvironment{equation*}{\end{gridenv}}
-        \BeforeBeginEnvironment{multline}{\begin{gridenv}}
-        \AfterEndEnvironment{multline}{\end{gridenv}}
-        \BeforeBeginEnvironment{multline*}{\begin{gridenv}}
-        \AfterEndEnvironment{multline*}{\end{gridenv}}
-        \BeforeBeginEnvironment{gather}{\begin{gridenv}}
-        \AfterEndEnvironment{gather}{\end{gridenv}}
-        \BeforeBeginEnvironment{gather*}{\begin{gridenv}}
-        \AfterEndEnvironment{gather*}{\end{gridenv}}
-        \BeforeBeginEnvironment{align}{\begin{gridenv}}
-        \AfterEndEnvironment{align}{\end{gridenv}}
-        \BeforeBeginEnvironment{align*}{\begin{gridenv}}
-        \AfterEndEnvironment{align*}{\end{gridenv}}
-        \BeforeBeginEnvironment{flalign}{\begin{gridenv}}
-        \AfterEndEnvironment{flalign}{\end{gridenv}}
-        \BeforeBeginEnvironment{flalign*}{\begin{gridenv}}
-        \AfterEndEnvironment{flalign*}{\end{gridenv}}
-        \BeforeBeginEnvironment{alignat}{\begin{gridenv}}
-        \AfterEndEnvironment{alignat}{\end{gridenv}}
-        \BeforeBeginEnvironment{alignat*}{\begin{gridenv}}
-        \AfterEndEnvironment{alignat*}{\end{gridenv}}
-\end{MacroCode}
-    The \env{figure} environment is patched...
-\begin{MacroCode}{class}
-        \expandafter\let\expandafter
-                    \old@figurest\csname figure*\endcsname
-        \expandafter\let\expandafter
-                    \old@endfigurest\csname endfigure*\endcsname
-        \RenewDocumentEnvironment{figure}{o}{%
-            \begin{gridenv}%
-            \vspace{\intextsep}%
-            \begin{minipage}{\linewidth}%
-            \def\@captype{figure}%
-        }{%
-            \end{minipage}%
-            \vspace{\intextsep}%
-            \end{gridenv}%
-        }
-        \RenewDocumentEnvironment{figure*}{o}{\old@figurest}%
-                                             {\old@endfigurest}
-\end{MacroCode}
-    ...as is \env{table}.
-\begin{MacroCode}{class}
-        \expandafter\let\expandafter
-                    \old@tablest\csname table*\endcsname
-        \expandafter\let\expandafter
-                    \old@endtablest\csname endtable*\endcsname
-        \RenewDocumentEnvironment{table}{o}{%
-            \begin{gridenv}%
-            \vspace{\intextsep}%
-            \begin{minipage}{\linewidth}%
-            \def\@captype{table}%
-            \let\@old@caption\caption%
-            \renewcommand{\caption}[1]{%
-                \setlength{\@tempdima}{\abovecaptionskip}%
-                \setlength{\abovecaptionskip}{\belowcaptionskip}%
-                \setlength{\belowcaptionskip}{\@tempdima}%
-                \@old@caption{##1}%
-                \vspace{\belowcaptionskip}%
-            }%
-        }{%
-            \end{minipage}%
-            \vspace{\intextsep}%
-            \end{gridenv}%
-        }
-        \let\oldoldtablest\oldtablest
-        \renewcommand{\oldtablest}{%
-            \oldoldtablest%
-            \let\@old@caption\caption%
-            \renewcommand{\caption}[1]{%
-                \setlength{\@tempdima}{\abovecaptionskip}%
-                \setlength{\abovecaptionskip}{\belowcaptionskip}%
-                \setlength{\belowcaptionskip}{\@tempdima}%
-                \@old@caption{##1}%
-                \vspace{\belowcaptionskip}%
-            }%
-        }
-        \RenewDocumentEnvironment{table*}{o}{\old@tablest}%
-                                            {\old@endtablest}
-\end{MacroCode}
-    \begin{environment}{onecol}
-    \changes{0.10}{Fixed, now not completely broken}
-    Finally, we define an environment \env{onecol} that typesets
-    arbitrary material in a single column. This is a bit tricky to
-    do, and probably cargo-cult as well. We define the start of the
-    environment to immediately end itself (with the empty ending),
-    then end the \env{multiols} environment, redefine our end macro
-    to start \env{multicols} as well as redefining the start of
-    \env{onecol} to simply reset itself, then start the environment
-    again only to have it ended at once.
-
-    Basically, we trick \LaTeX\ into thinking that we have an empty
-    \env{onecol} environment at the end of the first \env{multicols},
-    then some content inside a fake \env{onecol}, then an empty
-    \env{onecol} at the start of the next \env{multicols}. Voilá, no
-    wierd group errors!
-\begin{MacroCode}{class}
-        \newenvironment{onecol}{
-            \end{onecol}
-            \end{multicols}
-            \begingroup
-            \def\endonecol{
-                \endgroup
-                \begin{multicols}{2}
-                \let\old@onecol\onecol
-                \def\onecol{
-                    \let\onecol\old@onecol
-                }
-                \begin{onecol}
-            }
-            \def\onecol{}
-            \begin{onecol}
-        }{}
-    }
-\end{MacroCode}
-    \end{environment}
-\begin{MacroCode}{class}
-\fi
-\end{MacroCode}
-
-    \subsubsection{Miscellaneous}
-    A macro \cs{comment} (alias \cs{com}/\cs{note}) is defined to let 
-    the user add comments and notes to the document.
-    \begin{macro}{\@comment}
-\begin{MacroCode}{class}
-\NewDocumentCommand\@comment{m}{%
-    {\textbf{Comment:} #1}%
-}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\comment}
-    \changes{0.10}{Added macro for comments}
-\begin{MacroCode}{class}
-\NewDocumentCommand\comment{sm}{%
-    \IfBooleanTF{#1}%
-        {\colorbox{red!50}{\@comment{#2}}}%
-        {\marginpar{\@comment{#2}}}%
-}
-\end{MacroCode}
-    \end{macro}
-    \begin{macro}{\com}
-    \begin{macro}{\note}
-    \changes{0.10b}{Fixed a silly error in \cs{com} and \cs{note}}
-\begin{MacroCode}{class}
-\ProvideDocumentCommand\com{sm}%
-    {\IfBooleanTF{#1}{\comment*{#2}}{\comment{#2}}}
-\ProvideDocumentCommand\note{sm}%
-    {\IfBooleanTF{#1}{\comment*{#2}}{\comment{#2}}}
-\end{MacroCode}
-    \end{macro}
-    \end{macro}
-
-    \subsubsection{Color theme support}
-    Color theme setup. Start by patching commands and declaring
-    default colors. Not implemented: background colors for e.g.
-    quote environments and sections headings, different colors
-    for the different sectioning levels.
-\begin{MacroCode}{class}
-\ifskrapport@color
-    \apptocmd{\bfseries}{\color{skrapport@boldcolor}}{}{\ClassError{skrapport}{Could not patch \protect\bfseries}{}}
-    \apptocmd{\itshape}{\color{skrapport@italiccolor}}{}{\ClassError{skrapport}{Could not patch \protect\itshape}{}}
-    \if\@titstyle\relax
-        \def\@titstyle{\color{skrapport@titlecolor}}
-    \else
-        \apptocmd{\@titstyle}{\color{skrapport@titlecolor}}{}{\ClassError{skrapport}{Could not patch \protect\@titstyle}{}}
-    \fi
-    \def\@smallprintstyle{\color{skrapport@smallprintcolor}}
-    \AtBeginDocument{%
-        \let\@abstractname\abstractname
-        \def\abstractname{\color{skrapport@titlecolor}\@abstractname}
-    }
-    \apptocmd{\quote}{\color{skrapport@quotecolor}}{}{}
-    \def\@captionstyle{\color{skrapport@captioncolor}}
-    \def\@emstyle{\color{skrapport@emphcolor}}
-    \ifskrapport@twocolumn\AtBeginDocument{%
-        \renewcommand\section{\@startsection {section}{1}{\z@}%
-            {-.999\baselineskip}{0.001\baselineskip}{\bfseries\mathversion{bold}\color{skrapport@titlecolor}}}
-        \renewcommand\subsection{\@startsection{subsection}{2}{\z@}%
-            {\baselineskip}{-.35\baselineskip}{\bfseries\color{skrapport@titlecolor}\unskip}}
-        \renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
-            {\baselineskip}{-.35\baselineskip}{\itshape\color{skrapport@titlecolor}\unskip}}
-    }\fi
-    \renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
-        {1ex \@plus .25ex \@minus -.25ex}{-1em}{\normalfont\normalsize\bfseries\color{skrapport@titlecolor}}}
-    \renewcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
-        {1ex \@plus .25ex \@minus -.25ex}{-1em}{\normalfont\normalsize\itshape\color{skrapport@titlecolor}}}
-    \AtBeginDocument{\@ifpackageloaded{hyperref}{%
-        \hypersetup{%
-            citebordercolor=skrapport@citecolor,citecolor=skrapport@citecolor,%
-            filebordercolor=skrapport@filecolor,filecolor=skrapport@filecolor,%
-            linkbordercolor=skrapport@linkcolor,linkcolor=skrapport@linkcolor,%
-            menubordercolor=skrapport@menucolor,menucolor=skrapport@menucolor,%
-            urlbordercolor=skrapport@urlcolor,urlcolor=skrapport@urlcolor,%
-            runbordercolor=skrapport@runcolor,runcolor=skrapport@runcolor%
-        }
-    }{}}
-    \AtBeginDocument{\color{skrapport@defaultcolor}}
-\end{MacroCode}
-    \begin{macro}{\colortheme}
-    The \cs{colortheme} macro allows the end-user to load color themes
-    (described later) to customize the colors of the document when the
-    class is loaded with the \opt{color} option.
-\begin{MacroCode}{class}
-    \newcommand\colortheme[1]{\usepackage{skrapport-colortheme-#1}}
-\end{MacroCode}
-    \end{macro}
-\begin{MacroCode}{class}
-    \colortheme{default}
-\fi
-\end{MacroCode}
-
-    \subsection{Final class setup}
-    We end the document class by setting a few lengths along with the
-    page style and page numbering. Also, activate \cs{raggedbottom} and
-    \cs{onexolumn} (since we always do all the two-column stuff
-    ourselves anyway).
-\begin{MacroCode}{class}
-\setlength\columnsep{10\p@}
-\setlength\columnseprule{0\p@}
-\pagestyle{plain}
-\pagenumbering{arabic}
-\raggedbottom
-\onecolumn
-\endinput
-\end{MacroCode}
-
-    \subsection{Color themes}
-    As described earlier, the user can load color themes to customize
-    the appearance of the document if the class was loaded with the
-    \opt{color} option. Four themes are available by default.
-    
-    \subsubsection{Default color theme}
-    \begin{theme}{Default}
-    \changes{0.09}{Added default color theme}
-\begin{MacroCode}{theme-default}
-\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-\ProvidesPackage{skrapport-colortheme-default}%
-    [2012/06/07 v1.0 skrapport color theme default]
-\definecolor{skrapport@citecolor}{named}{green}
-\definecolor{skrapport@filecolor}{named}{teal}
-\definecolor{skrapport@linkcolor}{named}{red}
-\definecolor{skrapport@menucolor}{named}{red}
-\definecolor{skrapport@urlcolor}{named}{cyan}
-\definecolor{skrapport@runcolor}{named}{teal}
-\definecolor{skrapport@boldcolor}{named}{black}
-\definecolor{skrapport@titlecolor}{named}{black}
-\definecolor{skrapport@italiccolor}{named}{black}
-\definecolor{skrapport@smallprintcolor}{named}{black}
-\definecolor{skrapport@quotecolor}{named}{black}
-\definecolor{skrapport@captioncolor}{named}{black}
-\definecolor{skrapport@emphcolor}{named}{black}
-\definecolor{skrapport@defaultcolor}{named}{black}
-\endinput
-\end{MacroCode}
-    \end{theme}
-
-    \subsubsection{Unscathed color theme}
-    \begin{theme}{Unscathed}
-    \changes{0.09}{Added ``Unschathed'' color theme}
-\begin{MacroCode}{theme-unscathed}
-\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-\ProvidesPackage{skrapport-colortheme-unscathed}%
-    [2012/06/07 v1.0 skrapport color theme unscathed]
-\definecolor{skrapport@citecolor}{named}{skrapport@defaultcolor}
-\definecolor{skrapport@filecolor}{named}{skrapport@defaultcolor}
-\definecolor{skrapport@menucolor}{named}{skrapport@defaultcolor}
-\definecolor{skrapport@runcolor}{named}{skrapport@defaultcolor}
-\definecolor{skrapport@emphcolor}{HTML}{463335}
-\definecolor{skrapport@linkcolor}{HTML}{CF5D3B}
-\definecolor{skrapport@urlcolor}{named}{skrapport@linkcolor}
-\definecolor{skrapport@titlecolor}{HTML}{B34430}
-\definecolor{skrapport@captioncolor}{named}{skrapport@titlecolor}
-\definecolor{skrapport@quotecolor}{HTML}{70524A}
-\definecolor{skrapport@smallprintcolor}{named}{skrapport@quotecolor}
-\endinput
-\end{MacroCode}
-    \end{theme}
-
-    \subsubsection{Cruelwater color theme}
-    \begin{theme}{Cruelwater}
-    \changes{0.09}{Added ``Cruelwater'' color theme}
-\begin{MacroCode}{theme-cruelwater}
-\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-\ProvidesPackage{skrapport-colortheme-cruelwater}%
-    [2012/06/07 v1.0 skrapport color theme cruelwater]
-\definecolor{skrapport@citecolor}{named}{black}
-\definecolor{skrapport@filecolor}{named}{black}
-\definecolor{skrapport@linkcolor}{named}{black}
-\definecolor{skrapport@menucolor}{named}{black}
-\definecolor{skrapport@urlcolor}{named}{black}
-\definecolor{skrapport@runcolor}{named}{black}
-\definecolor{skrapport@boldcolor}{HTML}{030C22}
-\definecolor{skrapport@titlecolor}{HTML}{20293F}
-\definecolor{skrapport@italiccolor}{named}{black}
-\definecolor{skrapport@smallprintcolor}{HTML}{A9B0B3}
-\definecolor{skrapport@quotecolor}{HTML}{404749}
-\definecolor{skrapport@captioncolor}{HTML}{030C22}
-\definecolor{skrapport@emphcolor}{HTML}{20293F}
-\definecolor{skrapport@defaultcolor}{named}{black}
-\endinput
-\end{MacroCode}
-    \end{theme}
-
-    \subsubsection{Violet color theme}
-    \begin{theme}{Violet}
-\changes{0.09}{Added ``Violet'' color theme}
-\begin{MacroCode}{theme-violet}
-\NeedsTeXFormat{LaTeX2e}[1999/12/01]
-\ProvidesPackage{skrapport-colortheme-violet}%
-    [2012/06/07 v1.0 skrapport color theme violet]
-\definecolor{skrapport@citecolor}{HTML}{932444}
-\definecolor{skrapport@filecolor}{HTML}{932444}
-\definecolor{skrapport@linkcolor}{HTML}{932444}
-\definecolor{skrapport@menucolor}{HTML}{932444}
-\definecolor{skrapport@urlcolor}{HTML}{932444}
-\definecolor{skrapport@runcolor}{HTML}{932444}
-\definecolor{skrapport@boldcolor}{HTML}{311A2A}
-\definecolor{skrapport@titlecolor}{HTML}{311A2A}
-\definecolor{skrapport@italiccolor}{named}{black}
-\definecolor{skrapport@smallprintcolor}{HTML}{D6CBCF}
-\definecolor{skrapport@quotecolor}{HTML}{463335}
-\definecolor{skrapport@captioncolor}{HTML}{311A2A}
-\definecolor{skrapport@emphcolor}{HTML}{98758D}
-\definecolor{skrapport@defaultcolor}{named}{black}
-\endinput
-\end{MacroCode}
-    \end{theme}
-
-    \Finale
-    \PrintChanges
-    \PrintIndex
-    \printbibliography
-\end{document}