expl3 2184 (7mar11)

git-svn-id: svn://tug.org/texlive/trunk@21634 c570f23f-e606-0410-a88d-b1316a301751

6 files changed, 578 insertions, 0 deletions

diff --git a/Master/texmf-dist/doc/latex/expl3/expl3.pdf b/Master/texmf-dist/doc/latex/expl3/expl3.pdf
index 1c079761cf7..6ae7f5f29d1 100644
--- a/Master/texmf-dist/doc/latex/expl3/expl3.pdf
+++ b/Master/texmf-dist/doc/latex/expl3/expl3.pdf
diff --git a/Master/texmf-dist/doc/latex/expl3/interface3.tex b/Master/texmf-dist/doc/latex/expl3/interface3.tex
new file mode 100644
index 00000000000..cb2d3d88335
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/expl3/interface3.tex
@@ -0,0 +1,83 @@
+% \iffalse
+%% File: interface3.tex Copyright (C) 1990-2010 LaTeX3 project
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version.  The latest version
+%% of this license is in the file
+%%
+%%    http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the ``expl3 bundle'' (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -----------------------------------------------------------------------
+%%
+%% The development version of the bundle can be found at
+%%
+%%    http://www.latex-project.org/svnroot/experimental/trunk/
+%%
+%% for those people who are interested.
+%%
+%%%%%%%%%%%
+%% NOTE: %%
+%%%%%%%%%%%
+%%
+%%   Snapshots taken from the repository represent work in progress and may
+%%   not work or may contain conflicting material!  We therefore ask
+%%   people _not_ to put them into distributions, archives, etc. without
+%%   prior consultation with the LaTeX Project Team.
+%%
+%% -----------------------------------------------------------------------
+%% \fi
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% This document will typeset the LaTeX3 interface descriptions a single
+% document. This will produce quite a large file (more than 170 pages
+% currently) and may take a long time on a slow machine.
+%
+% There is also a full version of the sources (source3.tex) which additionally
+% also typesets the command implementations.
+%
+% Do not forget to generate the index (as explained on the terminal output
+% near the end of the run)!
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\documentclass{l3doc} \listfiles
+
+\begin{document}
+%\catcode\string`\_\string=\active
+
+\title{The \LaTeX3 Interfaces}
+\author{\Team}
+
+\pagenumbering{roman}
+\maketitle
+
+%
+% First load all modules and typeset the documentation parts
+%
+
+\input{source3body}    % all the individual modules
+
+
+
+\clearpage
+
+\begingroup
+\def\endash{--}
+\catcode`\-\active
+\def-{\futurelet\temp\indexdash}
+\def\indexdash{\ifx\temp-\endash\fi}
+
+\DelayPrintIndex
+\endgroup
+
+\end{document}
+
+
diff --git a/Master/texmf-dist/doc/latex/expl3/l3calc.pdf b/Master/texmf-dist/doc/latex/expl3/l3calc.pdf
index 49e994124a6..f70c06bc799 100644
--- a/Master/texmf-dist/doc/latex/expl3/l3calc.pdf
+++ b/Master/texmf-dist/doc/latex/expl3/l3calc.pdf
diff --git a/Master/texmf-dist/doc/latex/expl3/source3.pdf b/Master/texmf-dist/doc/latex/expl3/source3.pdf
index 5f95838412d..91801d0783b 100644
--- a/Master/texmf-dist/doc/latex/expl3/source3.pdf
+++ b/Master/texmf-dist/doc/latex/expl3/source3.pdf
diff --git a/Master/texmf-dist/doc/latex/expl3/source3.tex b/Master/texmf-dist/doc/latex/expl3/source3.tex
new file mode 100644
index 00000000000..74199936ca1
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/expl3/source3.tex
@@ -0,0 +1,102 @@
+% \iffalse
+%% File: source3.dtx Copyright (C) 1990-2010 LaTeX3 project
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version.  The latest version
+%% of this license is in the file
+%%
+%%    http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the ``expl3 bundle'' (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -----------------------------------------------------------------------
+%%
+%% The development version of the bundle can be found at
+%%
+%%    http://www.latex-project.org/svnroot/experimental/trunk/
+%%
+%% for those people who are interested.
+%%
+%%%%%%%%%%%
+%% NOTE: %%
+%%%%%%%%%%%
+%%
+%%   Snapshots taken from the repository represent work in progress and may
+%%   not work or may contain conflicting material!  We therefore ask
+%%   people _not_ to put them into distributions, archives, etc. without
+%%   prior consultation with the LaTeX Project Team.
+%%
+%% -----------------------------------------------------------------------
+%% \fi
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% This document will typeset the LaTeX3 sources as a single document.
+% This will produce quite a large file (more than 400 pages) and may
+% take a long time on a slow machine.
+%
+% There is also a shorter version (interface3.tex) that only typesets the
+% command % interface descriptions.
+%
+% Do not forget to generate the index (as explained on the terminal output
+% near the end of the run)!
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\documentclass{l3doc}
+\listfiles
+
+\begin{document}
+
+
+\title{The \LaTeX3 Sources}
+\author{\Team}
+
+\pagenumbering{roman}
+\maketitle
+
+%
+% First load all modules and typeset the documentation parts
+%
+
+\input{source3body}    % all the individual modules
+
+%
+% Now reload all modules and typeset the implementation parts
+%
+
+\part{Implementation}
+\def\maketitle{}
+\EnableImplementation
+\DisableDocumentation
+\DocInputAgain
+
+%% \DocInput{l3vers.dtx}   % Current version date
+
+\clearpage
+\pagestyle{headings}
+
+% Make TeX shut up.
+\hbadness=10000
+\newcount\hbadness
+\hfuzz=\maxdimen
+
+\PrintChanges
+\clearpage
+
+\begingroup
+\def\endash{--}
+\catcode`\-\active
+\def-{\futurelet\temp\indexdash}
+\def\indexdash{\ifx\temp-\endash\fi}
+
+\DelayPrintIndex
+\endgroup
+
+\end{document}
+
+
diff --git a/Master/texmf-dist/doc/latex/expl3/source3body.tex b/Master/texmf-dist/doc/latex/expl3/source3body.tex
new file mode 100644
index 00000000000..9700fc44dbf
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/expl3/source3body.tex
@@ -0,0 +1,393 @@
+% \iffalse
+%% File: source3body.tex Copyright (C) 1990-2010 LaTeX3 project
+%%
+%% It may be distributed and/or modified under the conditions of the
+%% LaTeX Project Public License (LPPL), either version 1.3c of this
+%% license or (at your option) any later version.  The latest version
+%% of this license is in the file
+%%
+%%    http://www.latex-project.org/lppl.txt
+%%
+%% This file is part of the ``expl3 bundle'' (The Work in LPPL)
+%% and all files in that bundle must be distributed together.
+%%
+%% The released version of this bundle is available from CTAN.
+%%
+%% -----------------------------------------------------------------------
+%%
+%% The development version of the bundle can be found at
+%%
+%%    http://www.latex-project.org/svnroot/experimental/trunk/
+%%
+%% for those people who are interested.
+%%
+%%%%%%%%%%%
+%% NOTE: %%
+%%%%%%%%%%%
+%%
+%%   Snapshots taken from the repository represent work in progress and may
+%%   not work or may contain conflicting material!  We therefore ask
+%%   people _not_ to put them into distributions, archives, etc. without
+%%   prior consultation with the LaTeX Project Team.
+%%
+%% -----------------------------------------------------------------------
+%% \fi
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% This file is used by
+%
+%  source3.tex            % documentation including implementation
+%
+%  interface3.tex         % only interface documentation
+%
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+\begin{abstract}
+
+\setlength\parindent{0pt}
+\setlength\parskip{\baselineskip}
+
+\noindent This is the reference documentation for the \pkg{expl3} 
+programming environment. The \pkg{expl3} modules set up an experimental
+naming scheme for \LaTeX\ commands, which allow the \LaTeX\ programmer
+to systematically name functions and variables, and specify the argument
+types of functions.
+
+The \TeX\ and \eTeX\ primitives are all given a new name according to
+these conventions. However, in the main direct use of the primitives is
+not required or encouraged: the \pkg{expl3} modules define an
+independent low-level \LaTeX3 programming language.
+
+At present, the \pkg{expl3} modules are designed to be loaded on top of
+\LaTeXe. In time, a \LaTeX3 format will be produced based on this code.
+This allows the code to be used in \LaTeXe\ packages \emph{now} while a
+stand-alone \LaTeX3 is developed.
+
+\begin{bfseries}
+  While \pkg{expl3} is still experimental, the bundle is now regarded as
+  broadly stable. The syntax conventions and functions provided are now
+  ready for wider use. There may still be changes to some functions, but
+  these will be minor when compared to the scope of \pkg{expl3}.
+
+  New modules will be added to the distributed version of \pkg{expl3} as
+  they reach maturity.
+\end{bfseries}
+
+\end{abstract}
+
+\clearpage
+
+{\def\\{:}% fix "newlines" in the ToC
+\tableofcontents}
+
+\clearpage
+\pagenumbering{arabic}
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% Each of the following \DocInput lines includes a file with extension
+% .dtx. Each of these files may be typeset separately. For instance
+%   pdflatex l3box.dtx
+% will typeset the source of the LaTeX3 box commands. If you use the
+% Makefile, the index will be generated automatically; e.g.,
+%   make doc F=l3box
+%
+% If this file is processed, each of these separate dtx files will be
+% contained as a part of a single document.
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\makeatletter
+\def\partname{Part}
+\def\maketitle{\part{\@title}}
+\let\thanks\@gobble
+\let\DelayPrintIndex\PrintIndex
+\let\PrintIndex\@empty
+\makeatother
+
+\part{Introduction to \pkg{expl3} and this document}
+
+This document is intended to act as a comprehensive reference manual 
+for the \pkg{expl3} language. A general guide to the \LaTeX3 
+programming language is found in \href{expl3.pdf}{expl3.pdf}.
+
+\section{Naming functions and variables} 
+
+\LaTeX3 does not use \texttt{@} as a ``letter'' for defining
+internal macros.  Instead, the symbols |_| and \texttt{:}
+are used in internal macro names to provide structure. The name of
+each \emph{function} is divided into logical units using \texttt{_}, 
+while \texttt{:} separates the \emph{name} of the function from the 
+\emph{argument specifier} (``arg-spec''). This describes the arguments 
+expected by the function. In most cases, each argument is represented 
+by a single letter. The complete list of arg-spec letters for a function
+is referred to as the \emph{signature} of the function.
+
+Each function name starts with the \emph{module} to which it belongs.
+Thus apart from a small number of very basic functions, all \pkg{expl3}
+function names contain at least one underscore to divide the module
+name from the descriptive name of the function. For example, all
+functions concerned with comma lists are in module \texttt{clist} and
+begin \cs{clist_}.
+
+Every function must include an argument specifier. For functions which
+take no arguments, this will be blank and the function name will end
+\texttt{:}. Most functions take one or more arguments, and use the
+following argument specifiers:
+\begin{description}
+  \item[\texttt{D}] The \texttt{D} specifier means \emph{do not use}. 
+    All of the \TeX\ primitives are initially \cs{let} to a \texttt{D}
+    name, and some are then given a second name.  Only the kernel 
+    team should use anything with a \texttt{D} specifier!
+  \item[\texttt{N} and \texttt{n}] These mean \emph{no manipulation},
+    of a single token for \texttt{N} and of a set of tokens given in 
+    braces for \texttt{n}. Both pass the argument though exactly as 
+    given. Usually, if you use a single token for an \texttt{n} argument, 
+    all will be well.
+  \item[\texttt{c}] This means \emph{csname}, and indicates that the 
+    argument will be turned into a csname before being used. So
+    So \cs{foo:c} |{ArgumentOne}| will act in the same way as \cs{foo:N}
+    \cs{ArgumentOne}.
+  \item[\texttt{V} and \texttt{v}] These mean \emph{value 
+    of variable}. The \texttt{V} and \texttt{v} specifiers are used to 
+    get the content of a variable without needing to worry about the
+    underlying \TeX\ structure containing the data. A \texttt{V} 
+    argument will be a single token (similar to \texttt{N}), for example
+    \cs{foo:V} \cs{MyVariable}; on the other hand, using \texttt{v} a 
+    csname is constructed first, and then the value is recovered, for 
+    example \cs{foo:v} |{MyVariable}|.
+  \item[\texttt{o}] This means \emph{expansion once}. In general, the
+    \texttt{V} and \texttt{v} specifiers are favoured over \texttt{o}
+    for recovering stored information. However, \texttt{o} is useful
+    for correctly processing information with delimited arguments.
+  \item[\texttt{x}] The \texttt{x} specifier stands for \emph{exhaustive 
+    expansion}: the plain \TeX\ \cs{edef}.
+  \item[\texttt{f}] The \texttt{f} specifier stands for \emph{full 
+    expansion}, and in contrast to \emph{x} stops at the first 
+    non-expandable item without trying to execute it.
+  \item[\texttt{T} and \texttt{F}] For logic tests, there are the branch
+    specifiers \texttt{T} (\emph{true}) and \texttt{F} (\emph{false}). 
+    Both specifiers treat the input in the same way as \texttt{n} (no 
+    change), but make the logic much easier to see.
+  \item[\texttt{p}] The letter \texttt{p} indicates \TeX\ 
+    \emph{parameters}. Normally this will be used for delimited 
+    functions as \pkg{expl3} provides better methods for creating simple
+    sequential arguments.    
+  \item[\texttt{w}] Finally, there is the \texttt{w} specifier for 
+    \emph{weird} arguments. This covers everything else, but mainly 
+    applies to delimited values (where the argument must be terminated 
+    by some arbitrary string).
+\end{description}
+Notice that the argument specifier describes how the argument is 
+processed prior to being passed to the underlying function. For example,
+\cs{foo:c} will take its argument, convert it to a control sequence and
+pass it to \cs{foo:N}.
+
+Variables are named in a similar manner to functions, but begin with
+a single letter to define the type of variable:
+\begin{description}
+  \item[\texttt{c}] Constant: global parameters whose value should not
+    be changed.
+  \item[\texttt{g}] Parameters whose value should only be set globally.
+  \item[\texttt{l}] Parameters whose value should only be set locally.
+\end{description}
+Each variable name is then build up in a similar way to that of a 
+function, typically starting with the module\footnote{The module names are
+  not used in case of generic scratch registers defined in the data
+  type modules, e.g., the
+  \texttt{int} module contains some scratch variables called \cs{l_tmpa_int},
+  \cs{l_tmpb_int}, and so on. In such a case adding the module name up front
+  to denote the module
+  and in the back to indicate the type, as in
+  \cs{l_int_tmpa_int} would be very unreadable.}  name
+and then a descriptive part.
+Variables end with a short identifier to show the variable type:
+\begin{description}
+  \item[\texttt{bool}] Either true or false.
+  \item[\texttt{box}] Box register.
+  \item[\texttt{clist}] Comma separated list.
+  \item[\texttt{dim}] `Rigid' lengths.
+  \item[\texttt{int}] Integer-valued count register.
+  \item[\texttt{num}] A `fake' integer type using only macros. Useful for
+    setting up allocation routines.
+  \item[\texttt{prop}] Property list.
+  \item[\texttt{skip}] `Rubber' lengths.
+  \item[\texttt{seq}] `Sequence': a data-type used to implement lists 
+    (with access at both ends) and stacks.
+  \item[\texttt{stream}] An input or output stream (for reading from or 
+    writing to, respectively).
+  \item[\texttt{tl}] Token list variables: placeholder for a token list.
+  \item[\texttt{toks}] Token register.
+\end{description}
+
+\subsubsection{Terminological inexactitude}
+
+A word of warning. In this document, and others referring to the \pkg{expl3}
+programming modules, we often refer to `variables' and `functions' as if they
+were actual constructs from a real programming language.  In truth, \TeX\ is a
+macro processor, and functions are simply macros that may or mayn't take
+arguments and expand to their replacement text.  Many of the common variables
+are \emph{also} macros, and if placed into the input stream will simply expand
+to their definition as well~--- a `function' with no arguments and a `token
+list variable' are in truth one and the same.  On the other hand, some
+`variables' are actually registers that must be initialised and their values
+set and retreived with specific functions.
+
+The conventions of the \pkg{expl3} code are designed to clearly separate the
+ideas of `macros that contain data' and `macros that contain code', and a
+consistent wrapper is applied to all forms of `data' whether they be macros or
+actually registers.  This means that sometimes we will use phrases like `the
+function returns a value', when actually we just mean `the macro expands to
+something'. Similarly, the term `execute' might be used in place of `expand'
+or it might refer to the more specific case of `processing in \TeX's stomach'
+(if you are familiar with the \TeX{}book parlance).
+
+If in doubt, please ask; chances are we've been hasty in writing certain
+definitions and need to be told to tighten up our terminology.
+
+\section{Documentation conventions}
+
+This document is typeset with the experimental \pkg{l3doc} class; 
+several conventions are used to help describe the features of the code.
+A number of conventions are used here to make the documentation clearer.
+
+Each group of related functions is given in a box. For a function with
+a ``user'' name, this might read:
+\begin{function}{
+    \ExplSyntaxOn |
+    \ExplSyntaxOff
+  }
+  \begin{syntax}
+    "\ExplSyntaxOn" \dots\ "\ExplSyntaxOff"
+  \end{syntax}
+  The textual description of how the function works would appear here. The 
+  syntax of the function is shown in mono-spaced text to the right of 
+  the box. In this example, the function takes no arguments and so the 
+  name of the function is simply reprinted.
+\end{function}
+
+For programming functions, which use \texttt{_} and \texttt{:} in their name
+there are a few additional conventions: If two related functions are given
+with identical names but different argument specifiers, these are termed
+\emph{variants} of each other, and the latter functions are printed in grey to
+show this more clearly. They will carry out the same function but will take
+different types of argument:
+\begin{function}{
+    \seq_new:N |
+    \seq_new:c
+  }
+  \begin{syntax}
+    "\seq_new:N" <sequence>
+  \end{syntax}
+  When a number of variants are described, the arguments are usually
+  illustrated only for the base function. Here, <sequence> indicates 
+  that \cs{seq_new:N} expects the name of a sequence. From the argument
+  specifier, \cs{seq_new:c} also expects a sequence name, but as a 
+  name rather than as a control sequence. Each argument given in the
+  illustration should be described in the following text.
+\end{function}
+
+Some functions are fully expandable, which allows it to be used within 
+an \texttt{x}-type argument (in plain \TeX\ terms, inside an \cs{edef}).
+These fully expandable functions are indicated in the documentation by 
+a star:
+\begin{function}{
+    \cs_to_str:N / (EXP)
+  }
+  \begin{syntax}
+    "\cs_to_str:N" <cs>
+  \end{syntax}
+  As with other functions, some text should follow which explains how
+  the function works. Usually, only the star will indicate that the 
+  function is expandable. In this case, the function expects a <cs>, 
+  shorthand for a <control sequence>. 
+\end{function}
+
+Conditional (\texttt{if}) functions are normally defined in three variants, with
+\texttt{T}, \texttt{F} and \texttt{TF} argument specifiers. This allows
+them to be used for different `true'/`false' branches, depending on 
+which outcome the conditional is being used to test. To indicate this 
+without repetition, this information is given in a shortened form:
+\begin{function}{
+    \xetex_if_engine: / (TF) (EXP)
+  }
+  \begin{syntax}
+    "\xetex_if_engine:TF" <true code> <false code>
+  \end{syntax}
+  The underlining and italic of \texttt{TF} indicates that 
+  \cs{xetex_if_engine:T}, \cs{xetex_if_engine:F} and 
+  \cs{xetex_if_engine:TF} are all available. Usually, the illustration 
+  will use the \texttt{TF} variant, and so both <true code>
+  and <false code> will be shown. The two variant forms \texttt{T} and
+  \texttt{F} take only <true code> and <false code>, respectively.
+  Here, the star also shows that this function is expandable.
+  With some minor exceptions, \emph{all} conditional functions in the 
+  \pkg{expl3} modules should be defined in this way.
+\end{function}
+
+Variables, constants and so on are described in a similar manner:
+\begin{variable}{
+    \l_tmpa_tl
+  }
+  A short piece of text will describe the variable: there is no 
+  syntax illustration in this case.
+\end{variable}
+
+In some cases, the function is similar to one in \LaTeXe\ or plain \TeX.
+In these cases, the text will include an extra `\textbf{\TeX{}hackers 
+note}' section:
+\begin{function}{
+    \token_to_str:N / (EXP)
+  }
+  \begin{syntax}
+    "\token_to_str:N" <token> 
+  \end{syntax}
+  The normal description text.
+  \begin{texnote}
+    Detail for the experienced \TeX\ or \LaTeXe\ programmer. In this 
+    case, it would point out that this function is the \TeX\ primitive
+    \cs{string}.
+  \end{texnote}
+\end{function}
+
+\DisableImplementation
+
+\DocInput{l3names.dtx}
+
+\DocInput{l3basics.dtx}
+\DocInput{l3expan.dtx}
+\DocInput{l3prg.dtx}
+\DocInput{l3quark.dtx}
+\DocInput{l3token.dtx}
+
+\DocInput{l3int.dtx}
+\DocInput{l3skip.dtx}
+
+\DocInput{l3tl.dtx}
+\DocInput{l3toks.dtx}
+\DocInput{l3seq.dtx}
+\DocInput{l3clist.dtx}
+\DocInput{l3prop.dtx}
+
+\DocInput{l3font.dtx}
+\DocInput{l3box.dtx}
+
+\DocInput{l3io.dtx}
+\DocInput{l3msg.dtx}
+\DocInput{l3xref.dtx}
+\DocInput{l3keyval.dtx}
+\DocInput{l3keys.dtx}
+%\DocInput{l3calc.dtx}
+\DocInput{l3file.dtx}
+
+% \DocInput{l3precom.dtx}
+% \DocInput{l3alloc.dtx}
+% \DocInput{l3chk.dtx}
+
+\DocInput{l3fp.dtx}
+\DocInput{l3luatex.dtx}
+
+\endinput