summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/generic/pst-osci
diff options
context:
space:
mode:
authorNorbert Preining <preining@logic.at>2006-10-04 08:43:01 +0000
committerNorbert Preining <preining@logic.at>2006-10-04 08:43:01 +0000
commitba9472aebfed07843bc4faa00c7b96bc86194691 (patch)
tree4a952a012e2f1663beaac6384dec265fb50dd361 /Master/texmf-dist/doc/generic/pst-osci
parenta88bdfe70c672cfced299babf0a54881a916bcca (diff)
Fix ctan2tds for pgf installation
comment powerdot-doc-vn in tpm-ctan-check, it always breaks Update of the following packages: labelcas pstricks-add sectionbox ltxmisc frenchle flowfram verse emulateapj pst-pdf poemscol babelbib dk-bib breakurl screenplay ncctools xkeyval bibleref muthesis pst-labo pgf ncclatex active-conf xcolor commath lineno dottex makeplo git-svn-id: svn://tug.org/texlive/trunk@2240 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/generic/pst-osci')
-rw-r--r--Master/texmf-dist/doc/generic/pst-osci/Changes7
-rw-r--r--Master/texmf-dist/doc/generic/pst-osci/oscilloscope.pdfbin0 -> 806454 bytes
-rw-r--r--Master/texmf-dist/doc/generic/pst-osci/oscilloscope.tex361
-rw-r--r--Master/texmf-dist/doc/generic/pst-osci/pst-osci.doc539
4 files changed, 368 insertions, 539 deletions
diff --git a/Master/texmf-dist/doc/generic/pst-osci/Changes b/Master/texmf-dist/doc/generic/pst-osci/Changes
new file mode 100644
index 00000000000..36936331bfc
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-osci/Changes
@@ -0,0 +1,7 @@
+..... pst-osci.tex
+2.82 2005-11-07 - using pst-xkey (hv)
+ - some modification to the code (hv)
+
+..... pst-func.sty
+ 2005-11-07 new version
+
diff --git a/Master/texmf-dist/doc/generic/pst-osci/oscilloscope.pdf b/Master/texmf-dist/doc/generic/pst-osci/oscilloscope.pdf
new file mode 100644
index 00000000000..2a59cdbc1ad
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-osci/oscilloscope.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/generic/pst-osci/oscilloscope.tex b/Master/texmf-dist/doc/generic/pst-osci/oscilloscope.tex
new file mode 100644
index 00000000000..fc9f3719709
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/pst-osci/oscilloscope.tex
@@ -0,0 +1,361 @@
+\documentclass [a4paper,12pt,dvips]{article}
+\usepackage[latin1]{inputenc}%accepte les accents
+\usepackage[francais]{babel}% règles de césure
+\usepackage{pstricks}
+\usepackage{pst-osci}
+\usepackage{pst-char,pst-text}%,pst-plot}
+%\usepackage[usenames] {pstcol}
+
+\title {pst-osci \& AllColor}
+\author {Raoul \textsc{Hatterer}}
+\begin {document}
+\maketitle
+\section {Présentation}
+J'ai trouvé ce package magnifique de puissance et de simplicité mais les couleurs employées ne passant pas à l'impression noir et blanc j'ai ajouté une option qui emploie des nuances de gris pour palier à ce problème.
+\section {Utilisation}
+\subsection {En préambule}
+\verb+\usepackage{pst-osci}+
+
+Remarque: \verb+\usepackage{pstcol}+ n'est pas utilisable.
+\subsection {Commande}
+\verb+\Oscillo[options éventuelles]+
+
+\subsection{Compilation}
+Sous MacOSX j'utilise \emph{altpdflatex} ce qui doit correspondre à \emph{latex+dvips+ps2pdf}.
+\subsection {Nouvelle option}
+\verb+AllColor+ qui par defaut est à \verb+true+ mais qui lorsqu'on la met à \verb+false+ permet d'obtenir des oscillogrammes qui passent mieux à l'impression.
+
+\section {Exemples}
+Je reprends les exemples du document \emph{pst-osci.pdf} de Manuel \textsc{Luque} et Christophe \textsc{Jorssen}\footnote{Les auteurs du package \emph{pst-osci}} pour m'assurer qu'ils fonctionnent tels quels puis en rajoutant \verb+AllColor=false+. La taille est réduite à 50 \% grâce à \verb+\psscalebox {0.5}{ }+.
+
+\subsection{Oscillo \& Oscillo[AllColor=false]}
+\psscalebox{0.5}{\Oscillo \hspace{1cm}\Oscillo[AllColor=false]}
+
+\subsection{Oscillo[offset2= 5] \& Oscillo[offset2= 5, AllColor=false]}
+\psscalebox{0.5}{\Oscillo[offset2= 5] \hspace{1cm} \Oscillo[offset2= 5,AllColor=false]}
+
+Remarque: À partir de là, je ne précise plus que la figure de droite a été obtenue en rajoutant l'option \verb+AllColor=false+.
+% Extrema invisible
+\subsection{ Extrema invisible: Oscillo[offset2=5, amplitude1=5]}
+\psscalebox{0.5}{\Oscillo[offset2=5, amplitude1=5] \hspace{1cm}
+\Oscillo[offset2=5, amplitude1=5,AllColor=false]}
+
+% Good sensivity choice
+\subsection{Good sensivity choice: Oscillo[offset2=5,amplitude1=5, sensivity1=2]}
+\psscalebox{0.5}{\Oscillo[offset2=5,amplitude1=5, sensivity1=2]\hspace{1cm}
+\Oscillo[offset2=5,amplitude1=5, sensivity1=2,AllColor=false]}
+
+% Different amplitude
+\subsection{Different amplitude: Oscillo[amplitude1=3, amplitude2=1.5]}
+\psscalebox{0.5}{\Oscillo[amplitude1=3, amplitude2=1.5]\hspace{1cm}
+\Oscillo[amplitude1=3, amplitude2=1.5,AllColor=false]}
+% Different period
+\subsubsection{Different period: Oscillo[amplitude1=3,amplitude2=1.5, period2=50]}
+\psscalebox{0.5}{\Oscillo[amplitude1=3,amplitude2=1.5, period2=50]\hspace{1cm}
+\Oscillo[amplitude1=3,amplitude2=1.5, period2=50,AllColor=false]}
+% Different phase
+\subsection {Different phase: Oscillo[amplitude1=3,amplitude2=1.5, phase1=60, phase2=-30]}
+\psscalebox{0.5}{\Oscillo[amplitude1=3,amplitude2=1.5, phase1=60, phase2=-30]\hspace{1cm}
+\Oscillo[amplitude1=3,amplitude2=1.5, phase1=60, phase2=-30,AllColor=false]}
+
+\subsection{Damping and amplification: Oscillo[amplitude1=3,amplitude2=1.5,
+damping2=0.005, damping1=-0.005]}
+\psscalebox{0.5}{\Oscillo[amplitude1=3,amplitude2=1.5,
+damping2=0.005, damping1=-0.005]\hspace{1cm}
+\Oscillo[amplitude1=3,amplitude2=1.5,
+damping2=0.005, damping1=-0.005,AllColor=false]}
+
+
+\subsection {Changing the plot style}
+\psscalebox{0.5}{\newpsstyle{BlueDots}{plotstyle=dots,
+linecolor=blue,linewidth=0.02,plotpoints=50}
+\Oscillo[amplitude1=3, plotstyle2=BlueDots,amplitude2=2]\hspace{1cm}
+\newpsstyle{GreenDash}{linestyle=dashed,
+linecolor=green,linewidth=0.035,plotpoints=50}
+\Oscillo[amplitude1=2,phase1=90,amplitude2=3.8,period1=25,
+period2=50,phase2=10, plotstyle1=GreenDash]}
+\\
+
+\psscalebox{0.5}{\newpsstyle{BlueDots}{plotstyle=dots,
+linecolor=blue,linewidth=0.02,plotpoints=50}
+\Oscillo[amplitude1=3, plotstyle2=BlueDots,amplitude2=2,AllColor=false]\hspace{1cm}
+\newpsstyle{GreenDash}{linestyle=dashed,
+linecolor=green,linewidth=0.035,plotpoints=50}
+\Oscillo[amplitude1=2,phase1=90,amplitude2=3.8,period1=25,
+period2=50,phase2=10, plotstyle1=GreenDash,AllColor=false]}
+
+
+\begin{verbatim}
+\newpsstyle{BlueDots}{plotstyle=dots,
+linecolor=blue,linewidth=0.02,plotpoints=50}
+\Oscillo[amplitude1=3, plotstyle2=BlueDots,amplitude2=2]\hspace{1cm}
+\newpsstyle{GreenDash}{linestyle=dashed,
+linecolor=green,linewidth=0.035,plotpoints=50}
+\Oscillo[amplitude1=2,phase1=90,amplitude2=3.8,period1=25,
+period2=50,phase2=10, plotstyle1=GreenDash]
+\end{verbatim}
+
+Remarque: Ce n'est plus possible si l'on met \verb+AllColor=false+. Mais rien ne vous empêche de faire des \verb+linecolor=black+ (cependant les \textsc{on} et \textsc{off} ne passeront pas mieux à l'impression qu'auparavant).
+
+\subsection{Channel C: operations}
+\psscalebox{0.5}{\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add]
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,offset1=2,offset2=2]
+% SignalA and SignalB are invisible
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,offset1=6,offset2=6]}
+\\
+
+\psscalebox{0.5}{\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,AllColor=false]
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,offset1=2,offset2=2,AllColor=false]
+% SignalA and SignalB are invisible
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,offset1=6,offset2=6,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add]
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,offset1=2,offset2=2]
+% SignalA and SignalB are invisible
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= add,offset1=6,offset2=6]
+\end{verbatim}
+
+\subsection{Subtraction: Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true,operation= sub]}
+
+\psscalebox{0.5}{\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true,
+operation= sub]\hspace{1cm}
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true,
+operation= sub,AllColor=false]}
+
+\subsection {Multiplications}
+\psscalebox{0.5}{\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= mul]\hspace{1cm}
+\Oscillo[amplitude1=1,amplitude2=2,
+period2=50,period1=2, combine= true, operation= mul]}
+\\
+
+\psscalebox{0.5}{\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= mul,AllColor=false]\hspace{1cm}
+\Oscillo[amplitude1=1,amplitude2=2,
+period2=50,period1=2, combine= true, operation= mul,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[amplitude2=1.5,period2=50,period1=10,
+combine= true, operation= mul]
+\Oscillo[amplitude1=1,amplitude2=2,
+period2=50,period1=2, combine= true, operation= mul]
+\end{verbatim}
+
+\subsection{Channel C: XY-mode}
+\psscalebox{0.5}{\Oscillo[ Lissajous= true,amplitude2=2]
+\Oscillo[Lissajous=true,amplitude2=3,phase2=45]
+\Oscillo[Lissajous=true,amplitude2=2,phase2=90]}
+\\
+
+\psscalebox{0.5}{\Oscillo[ Lissajous=true,amplitude2=2,AllColor=false]
+\Oscillo[Lissajous=true,amplitude2=3,phase2=45,AllColor=false]
+\Oscillo[Lissajous=true,amplitude2=2,phase2=90,AllColor=false]}
+\begin{verbatim}
+\Oscillo[ Lissajous= true,amplitude2=2]
+\Oscillo[Lissajous=true,amplitude2=3,phase2=45]
+\Oscillo[Lissajous=true,amplitude2=2,phase2=90]
+\end{verbatim}
+
+\psscalebox{0.5}{\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=20,period2=10,phase2=0,Lissajous=true]
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=25,period2=5,phase2=60,Lissajous=true]
+\Oscillo[amplitude1=3.5,phase1=90,
+amplitude2=3.5,period1=50,period2=50,
+Lissajous=true,damping1=0.01,damping2=0.01]}
+\\
+
+\psscalebox{0.5}{\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=20,period2=10,phase2=0,Lissajous=true,AllColor=false]
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=25,period2=5,phase2=60,Lissajous=true,AllColor=false]
+\Oscillo[amplitude1=3.5,phase1=90,
+amplitude2=3.5,period1=50,period2=50,
+Lissajous=true,damping1=0.01,damping2=0.01,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=20,period2=10,phase2=0,Lissajous=true]
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=25,period2=5,phase2=60,Lissajous=true]
+\Oscillo[amplitude1=3.5,phase1=90,
+amplitude2=3.5,period1=50,period2=50,
+Lissajous=true,damping1=0.01,damping2=0.01]
+\end{verbatim}
+
+\subsection{Non sinusoidal signals}
+
+%\subsubsection*{Exponential signals}
+\psscalebox{0.5}{\Oscillo[amplitude1=3.5,phase1=90,
+period1= 2E30,offset2=5,damping1=0.02]\hspace{1cm}
+\Oscillo[amplitude1=3.5,phase1=90,
+period1= 2E30,offset2=3,amplitude2=-3,damping1=0.02,
+period2= 2E31,damping2=0.02,phase2=90]}
+
+\psscalebox{0.5}{\Oscillo[amplitude1=3.5,phase1=90,
+period1= 2E30,offset2=5,damping1=0.02,AllColor=false]\hspace{1cm}
+\Oscillo[amplitude1=3.5,phase1=90,
+period1= 2E30,offset2=3,amplitude2=-3,damping1=0.02,
+period2= 2E31,damping2=0.02,phase2=90,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[amplitude1=3.5,phase1=90,
+period1= 2E30,offset2=5,damping1=0.02]
+\Oscillo[amplitude1=3.5,phase1=90,
+period1= 2E30,offset2=3,amplitude2=-3,da
+period2= 2E31,damping2=0.02,phase2=90]
+\end{verbatim}
+
+\psscalebox{0.5}{\Oscillo[ Wave1= \TriangleA,amplitude2=2,period2=20,period1=25]\hspace{1cm}
+\Oscillo[ Wave1= \RectangleA,amplitude2=2,period2=20,period1=25]}
+\\
+
+\psscalebox{0.5}{\Oscillo[ Wave1= \TriangleA,amplitude2=2,period2=20,period1=25,AllColor=false]\hspace{1cm}
+\Oscillo[ Wave1= \RectangleA,amplitude2=2,period2=20,period1=25,AllColor=false]}
+
+\subsection{Combine examples}
+\psscalebox{0.5}{\Oscillo[Wave2=\TriangleB,combine=true,operation=mul,amplitude2=2,period2=50,period1=2,amplitude1=1]
+\Oscillo[combine=true,operation=add,amplitude2=1.5,Wave1=\RectangleA,amplitude1=1.5,period2=15]
+\Oscillo[combine=true,operation=add,amplitude2=1.5,Wave1=\RectangleA,amplitude1=1.5,period2=15,Wave2=\TriangleB]}
+\\
+
+\psscalebox{0.5}{\Oscillo[Wave2=\TriangleB,combine=true,operation=mul,amplitude2=2,period2=50,period1=2,amplitude1=1,AllColor=false]
+\Oscillo[combine=true,operation=add,amplitude2=1.5,Wave1=\RectangleA,amplitude1=1.5,period2=15,AllColor=false]
+\Oscillo[combine=true,operation=add,amplitude2=1.5,Wave1=\RectangleA,amplitude1=1.5,period2=15,Wave2=\TriangleB,AllColor=false]
+}
+\begin{verbatim}
+\Oscillo[Wave2=\TriangleB,combine=true,operation=mul,amplitude2=2,
+period2=50,period1=2,amplitude1=1]
+\Oscillo[combine=true,operation=add,amplitude2=1.5,
+Wave1=\RectangleA,amplitude1=1.5,period2=15]
+\Oscillo[combine=true,operation=add,amplitude2=1.5,
+Wave1=\RectangleA,amplitude1=1.5,period2=15,Wave2=\TriangleB]
+\end{verbatim}
+
+\subsection{Dog's tooth signal}
+\psscalebox{0.5}{\Oscillo[combine=true,operation=mul,amplitude2=1.5,
+Wave1= \RDogToothA,amplitude1=1.5,period2=15]\hspace{1cm}
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=25,period2=6.25,phase2=0,Lissajous=true,Wave2=\RDogToothB]}
+\\
+
+\psscalebox{0.5}{\Oscillo[combine=true,operation=mul,amplitude2=1.5,
+Wave1= \RDogToothA,amplitude1=1.5,period2=15,AllColor=false]\hspace{1cm}
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=25,period2=6.25,phase2=0,Lissajous=true,Wave2=\RDogToothB,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[combine=true,operation=mul,amplitude2=1.5,
+Wave1= \RDogToothA,amplitude1=1.5,period2=15]
+\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
+period1=25,period2=6.25,phase2=0,Lissajous=true,Wave2=\RDogToothB]
+\end{verbatim}
+
+\subsection{Frequency modulation examples}
+\psscalebox{0.5}{\Oscillo[ periodmodulation1=200, freqmod1=5,period1=30,
+timediv=50,plotpoints=1000,amplitude2=2,period2=200]
+\Oscillo[amplitude1=1,amplitude2=1,
+period2=25,period1=2,combine=true,operation=mul]
+\Oscillo[amplitude1=1,amplitude2=1, CC2=2,
+period2=25,period1=2,combine=true,operation=mul,offset1=5]}
+\\
+
+\psscalebox{0.5}{\Oscillo[ periodmodulation1=200, freqmod1=5,period1=30,
+timediv=50,plotpoints=1000,amplitude2=2,period2=200,AllColor=false]
+\Oscillo[amplitude1=1,amplitude2=1,
+period2=25,period1=2,combine=true,operation=mul,AllColor=false]
+\Oscillo[amplitude1=1,amplitude2=1, CC2=2,
+period2=25,period1=2,combine=true,operation=mul,offset1=5,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[ periodmodulation1=200, freqmod1=5,period1=30,
+timediv=50,plotpoints=1000,amplitude2=2,period2=200]
+\Oscillo[amplitude1=1,amplitude2=1,
+period2=25,period1=2,combine=true,operation=mul]
+\Oscillo[amplitude1=1,amplitude2=1, CC2=2,
+period2=25,period1=2,combine=true,operation=mul,offset1=5]
+\end{verbatim}
+
+\psscalebox{0.5}{\Oscillo[amplitude1=1,amplitude2=1,CC2=1.5,Wave2=\TriangleB,
+period2=25,period1=2,combine=true,operation=mul,offset1=5]
+\Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
+period2=25,period1=2,combine=true,operation=mul,offset1=5]
+\Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
+period2=20,period1=3,combine=true,operation=mul,offset1=5]}
+\\
+
+\psscalebox{0.5}{\Oscillo[amplitude1=1,amplitude2=1,CC2=1.5,Wave2=\TriangleB,
+period2=25,period1=2,combine=true,operation=mul,offset1=5,AllColor=false]
+\Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
+period2=25,period1=2,combine=true,operation=mul,offset1=5,AllColor=false]
+\Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
+period2=20,period1=3,combine=true,operation=mul,offset1=5,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[amplitude1=1,amplitude2=1,CC2=1.5,Wave2=\TriangleB,
+period2=25,period1=2,combine=true,operation=mul,offset1=5]
+\Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
+period2=25,period1=2,combine=true,operation=mul,offset1=5]
+\Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
+period2=20,period1=3,combine=true,operation=mul,offset1=5]
+\end{verbatim}
+
+\psscalebox{0.5}{\Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
+period2=25,period1=2,combine=true,operation=mul,
+offset1=5,offset3=-1]\hspace{1cm}
+\Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
+period2=20,period1=3,combine=true,operation=mul,
+offset1=5,offset3=1]}
+\\
+
+\psscalebox{0.5}{\Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
+period2=25,period1=2,combine=true,operation=mul,
+offset1=5,offset3=-1,AllColor=false]\hspace{1cm}
+\Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
+period2=20,period1=3,combine=true,operation=mul,
+offset1=5,offset3=1,AllColor=false]}
+
+\begin{verbatim}
+\Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
+period2=25,period1=2,combine=true,operation=mul,
+offset1=5,offset3=-1]\hspace{1cm}
+\Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
+period2=20,period1=3,combine=true,operation=mul,
+offset1=5,offset3=1]
+\end{verbatim}
+
+\subsection{More examples}
+\psscalebox{0.5}{\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,period1=50,
+period2=50,phase2=0,Lissajous=true,damping1=0.01,
+Wave2=\RectangleB]
+\Oscillo[amplitude1=2,amplitude2=1.8,Wave1=\RectangleA,
+Fourier=500,period1=25,period2=12.5,combine=true,
+operation=add,Wave2=\RectangleB]
+\Oscillo[amplitude1=4,amplitude2=3,period1=50,
+period2=5,Lissajous=true,Wave1=\RectangleA]}
+\\
+
+\psscalebox{0.5}{\Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,period1=50,
+period2=50,phase2=0,Lissajous=true,damping1=0.01,
+Wave2=\RectangleB,AllColor=false]
+\Oscillo[amplitude1=2,amplitude2=1.8,Wave1=\RectangleA,
+Fourier=500,period1=25,period2=12.5,combine=true,
+operation=add,Wave2=\RectangleB,AllColor=false]
+\Oscillo[amplitude1=4,amplitude2=3,period1=50,
+period2=5,Lissajous=true,Wave1=\RectangleA,AllColor=false]}
+
+
+\end {document}
diff --git a/Master/texmf-dist/doc/generic/pst-osci/pst-osci.doc b/Master/texmf-dist/doc/generic/pst-osci/pst-osci.doc
deleted file mode 100644
index 549dbd95b4e..00000000000
--- a/Master/texmf-dist/doc/generic/pst-osci/pst-osci.doc
+++ /dev/null
@@ -1,539 +0,0 @@
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -*- Mode: Latex -*- %%%%%%%%%%%%%%%%%%%%%%%%%%
-%% pst-osci.doc --- Documentation for `pst-osci' PSTricks package
-%%
-%% Authors : Manuel LUQUE <Mluque5130@aol.com>
-%% Christophe JORSSEN <Christophe.Jorssen@wanadoo.fr>
-%% Created : Thu 2 Sept 1999
-%% Last mod. by : Christophe JORSSEN <Christophe.Jorssen@wanadoo.fr>
-%% Last mod. the : Wed 17 Nov 1999
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\documentclass{article}
-
-\usepackage{pstcol,pst-osci,multicol} % PSTricks package for Oscilloscope screen shots
-\usepackage[baw,pstricks]{fvrb-ex} % Example environments with `fancyvrb'
-\usepackage[a4paper,left=1.5cm,right=1.5cm,top=1.5cm,bottom=1.5cm]{geometry}
-\usepackage{fancyhdr}
-
-% Modifications in `fvrb-ex' to use only 7 bits characters as escape ones
-% * will be for comment in place of £, and /() for commands in place of §µ¶
-% (this work here because these four characters are not used in the examples)
-
-\makeatletter
-
-\renewcommand{\Begin@Example}{%
-\parindent=0pt
-\multiply\topsep by 2
-\VerbatimEnvironment
-\begin{VerbatimOut}[codes={\catcode`\*=12\catcode`\/=12\catcode`\(=12%
- \catcode`\)=12}]{\jobname.tmp}}
-
-\renewcommand{\Below@Example}[1]{%
-\VerbatimInput[gobble=0,commentchar=*,commandchars=/(),numbersep=3pt]%
- {\jobname.tmp}
-\catcode`\*=9\relax%
-\NoHighlight@Attributes % To suppress possible highlighting
-\ifFvrbEx@Grid\vspace{5pt}\fi
-#1%
-\ifFvrbEx@Grid\vspace{5pt}\fi
-\par}
-
-\renewcommand{\SideBySide@Example}[1]{%
-\@tempdimb=\FV@XRightMargin
-\advance\@tempdimb -5mm
-\begin{minipage}[c]{\@tempdimb}
- \fvset{xrightmargin=0pt}
- \catcode`\*=9\relax%
- \NoHighlight@Attributes % To suppress possible highlighting
- #1
-\end{minipage}%
-\@tempdimb=\textwidth
-\advance\@tempdimb -\FV@XRightMargin
-\advance\@tempdimb 5mm
-\begin{minipage}[c]{\@tempdimb}
- \VerbatimInput[gobble=0,commentchar=*,commandchars=/(),numbersep=3pt,
- xleftmargin=5mm,xrightmargin=0pt]{\jobname.tmp}
-\end{minipage}}
-
-% The \NoHighlight@Attributes from `hbaw' and `hcolors' packages
-% must be modified too
-\def\NoHighlight@Attributes{%
-\catcode`\/=0\relax%
-\catcode`\(=1\relax%
-\catcode`\)=2\relax%
-\def\HLa##1{##1}%
-\def\HLb##1{##1}%
-\def\HLc##1{##1}%
-\def\HLd##1{##1}%
-\def\HLe##1{##1}%
-\def\HLf##1{##1}%
-\def\HLBFa##1{##1}%
-\def\HLBFb##1{##1}%
-\def\HLBFc##1{##1}%
-\def\HLBFd##1{##1}%
-\def\HLBFe##1{##1}%
-\def\HLBFf##1{##1}%
-\def\HLITa##1{##1}%
-\def\HLITb##1{##1}%
-\def\HLITc##1{##1}%
-\def\HLITd##1{##1}%
-\def\HLITe##1{##1}%
-\def\HLITf##1{##1}%
-\def\HLCBBa##1{##1}%
-\def\HLCBBb##1{##1}%
-\def\HLCBBc##1{##1}%
-\def\HLCBBd##1{##1}%
-\def\HLCBBe##1{##1}%
-\def\HLCBBf##1{##1}%
-\def\HLCBBz##1{##1}%
-\def\HLCBWa##1{##1}%
-\def\HLCBWb##1{##1}%
-\def\HLCBWc##1{##1}%
-\def\HLCBWd##1{##1}%
-\def\HLCBWe##1{##1}%
-\def\HLCBWf##1{##1}%
-\def\HLCBWz##1{##1}%
-}
-
-\makeatother
-
-% Example environments with numbers, single frame, label on top and margin
-\fvset{numbers=none,frame=single,labelposition=topline}
-
-% For macro names
-\DeclareRobustCommand\cs[1]{\texttt{\char`\\#1}}
-
-\newcommand{\OsciPackage}{\textbf{`pst-osci'}}
-\let\phi\varphi
-
-\lhead{\OsciPackage}\rhead{A PSTricks package for oscilloscopes} \pagestyle{fancy}
-
-\begin{document}
-
-\title{\OsciPackage\thanks{Thanks to Denis \textsc{Girou} for his most valuable
-help and his encouragements.}\\ A PSTricks package for oscilloscopes}
-\author{\shortstack{\makeatletter Manuel \textsc{Luque} \texttt{<Mluque5130@aol.com>}\\
-Christophe \textsc{Jorssen} \texttt{<Christophe.Jorssen@wanadoo.fr>}\makeatother}}
-\date{\shortstack{Version 2.7\\ \small Documentation revised November 17, 1999}}
-
-\maketitle
-
-\begin{center}
-\psframebox[framearc=0.3,framesep=5mm,linewidth=0.7mm]{%
-\parbox{15cm}{%
-{\Large\textbf{Abstract}}: \OsciPackage{} is a PSTricks package to draw easily
-oscilloscope screen shots. Three channels can be used to represent the most common
-signals (damped or not): namely sinusoidal ($y=A\exp (-\lambda t)\sin
-(\frac{2\pi}{T}t+m\cdot\sin(\frac{2\pi}{T_m}t)+\phi) + c$), rectangular, triangular,
-dog's tooth (left and right oriented). The third channel allows you to add, to
-subtract or to multiply the two other signals. \textsc{Lissajous} diagrams (XY-mode)
-can also be obtained.}}
-\end{center}
-
-\setlength{\columnseprule}{0.6pt}
-\begin{multicols}{2}
-{\parskip 0pt \tableofcontents}
-\end{multicols}
-
-\section{Introduction}
-
-\OsciPackage{} offers a unique macro with few parameters to interact on it (it is
-the same approach as in Denis \textsc{Girou}'s \textbf{`pst-poly'} package).
-\par
-The syntax is simply: \fbox{\cs{Oscillo}\texttt{[optional\_parameters]}}.
-\par
-\textbf{As for a real oscilloscope, it is important to choose the correct sensivity
-for each channel in relation to the amplitude of the signal. If you did the wrong
-choice, you will get bad-looking curves.}
-\par
-The style of the curves can be customized using the standard PSTricks parameters.
-
-\section{Usage}
-
-\subsection{Parameters}
-
-There are thirty specific parameters defined to change the way the screen shots are
-drawn.
-\par
-Henceforth, the signals represented on channels A, B and C will be called `SignalA',
-`SignalB' and `SignalC'.
-\begin{description}
-
-\item[\HLTTc{period1} (real):] period $T_1$ (in ms) of SignalA (\emph{default:~20}).
-
-\item[\HLTTc{period2} (real):] period $T_2$ (in ms) of SignalB (\emph{default:~20}).
-
-\item[\HLTTc{amplitude1} (real):] amplitude $A_1$ (in V) of SignalA (\emph{default:~2}).
-
-\item[\HLTTc{amplitude2} (real):] amplitude $A_2$ (in V) of SignalB
-(\emph{default:~0 -- no signal}).
-
-\item[\HLTTc{periodmodulation1} (real):] period $T_{m1}$ (in ms) of SignalA
-(\emph{default:~100}).
-
-\item[\HLTTc{periodmodulation2} (real):] period $T_{m2}$ (in ms) of SignalB
-(\emph{default:~100}).
-
-\item[\HLTTc{freqmod1} (real):] modulation factor $m_1$ of SignalA (\emph{default:~0}).
-
-\item[\HLTTc{freqmod2} (real):] modulation factor $m_2$ of SignalB (\emph{default:~0}).
-
-\item[\HLTTc{phase1} (real):] phase $\phi_1$ (in deg) of SignalA (\emph{default:~0}).
-
-\item[\HLTTc{phase2} (real):] phase $\phi_2$ (in deg) of SignalB (\emph{default:~0}).
-
-\item[\HLTTc{CC1} (real):] continuous component $c_1$ (in V) of SignalA (\emph{default:~0}).
-
-\item[\HLTTc{CC2} (real):] continuous component $c_2$ (in V) of SignalB (\emph{default:~0}).
-
-\item[\HLTTc{damping1} (real):] damping $\lambda_1$ of SignalA
-(\emph{default:~0 -- no damping}).
-
-\item[\HLTTc{damping2} (real):] damping $\lambda_2$ of SignalB
-(\emph{default:~0 -- no damping}).
-
-\item[\HLTTc{wave1}:] type of the SignalA chosen between \cs{SinusA}, \cs{RectangleA},
-\cs{TriangleA}, \cs{LDogToothA}, \cs{RDogToothA} (\emph{default: \cs{SinusA}}).
-
-\item[\HLTTc{wave2}:] type of the SignalB chosen between \cs{SinusB}, \cs{RectangleB},
-\cs{TriangleB}, \cs{LDogToothB}, \cs{RDogToothB} (\emph{default: \cs{SinusB}}).
-
-\item[\HLTTc{timediv} (real):] scale (in ms) of the time axis (\emph{default:~5}).
-
-\item[\HLTTc{Lissajous} (boolean):] switch to XY-mode (true) or not (false)
-(\emph{default: false}).
-
-\item[\HLTTc{sensivity1} (real):] scale (in V) of the channel A vertical axis
-(\emph{default:~1}).
-
-\item[\HLTTc{sensivity2} (real):] scale (in V) of the channel B vertical axis
-(\emph{default:~1}).
-
-\item[\HLTTc{plotstyle1}:] determines what kind of plot you will get for
-channel A (\emph{default: GreenContA}). Note that you can customize the plotstyle
-using the \cs{newpsstyle} macro (see below for examples).
-
-\item[\HLTTc{plotstyle2}:] determines what kind of plot you will get for
-channel B (\emph{default: BlueContB}). Same remark as above.
-
-\item[\HLTTc{plotstyle3}:] determines what kind of plot you will get for
-XY-mode (\emph{default: RedContLissajous}). Same remark as above.
-
-\item[\HLTTc{plotstyle4}:] determines what kind of plot you will get for
-add, sub or mul operation (third channel) (\emph{default: MagentaContAddSub}). Same
-remark as above.
-
-\item[\HLTTc{combine} (boolean):] if true allows to draw combination of SignalA
-and SignalB on channel C (namely addition, subtraction or multiplication)
-(\emph{default: false -- no signal}). See next item.
-
-\item[\HLTTc{operation}:] determines what kind of operation will be applied to
-SignalA and SignalB to get SignalC. The valid parameters are add, sub and mul
-(\emph{default: \cs{relax} -- no operation}).
-
-\item[\HLTTc{Fourier} (integer):] see below (Section \ref{Rectangular})
-(\emph{default:~100}).
-
-\item[\HLTTc{offset1} (real):] offset $c'_1$ (in V) of SignalA (\emph{default:~0}).
-
-\item[\HLTTc{offset2} (real):] offset $c'_2$ (in V) of SignalB (\emph{default:~0}).
-
-\item[\HLTTc{offset3} (real):] offset $c'_2$ (in V) of SignalC (\emph{default:~0}).
-
-
-\end{description}
-
-\subsection{Rectangular, triangular and dog's tooth signals\label{Rectangular}}
-
-The parameter \HLTTc{Fourier} controls the precision of the Fourier transform used to
-draw rectangular, triangular and dog's tooth signals. The number of terms is fixed to
-100 by default in order to minimize the computation time. But you can give
-\HLTTc{Fourier} any value you want.
-\par
-Note that those signals can also be damped using the \HLTTc{damping1} and
-\HLTTc{damping2} parameters. By default, there is no damping ($\lambda=1$).
-
-\subsection{\OsciPackage{} and \LaTeX}
-
-\OsciPackage{} defines colors that may interact with the \textbf{`color'} package.
-You should then use the \textbf{`pst-col'} package and load \OsciPackage{} this way:
-\begin{Verbatim}
- \usepackage{pstcol,pst-osci}
-\end{Verbatim}
-
-\subsection{Reducing the size of the Oscilloscope}
-
-The oscilloscope is put inside a 10\,cm square \HLTTc{pspicture} environment. There
-are two ways to reduce the size of the box, depending on the fonts you use.
-
-\subsubsection{Using PostScript fonts}
-
-We recommend that solution because it allows you to treat fonts like any other
-PostScript object. As a matter of fact, you can, for instance, put your \cs{Oscillo}
-macro inside a PSTricks \cs{scalebox}. It is very simple and offers good results.
-However, pay attention to the fact that, if you are using non-PS fonts, the result
-will look ugly!
-
-\subsubsection{Using non-PostScript fonts}
-
-If you use non-PS fonts and if you want to reduce the size of the Oscilloscope, you
-should type something like:
-\begin{Verbatim}
- {\psset{unit=0.5}\footnotesize\Oscillo}
-\end{Verbatim}
-
-\section{Examples}
-
-\subsection{Basic examples}
-
-\begin{CenterExample}[label={The \cs{Oscillo} macro, default parameters}]
- \Oscillo
-\end{CenterExample}
-
-\textbf{In order to minimize the size of the file, all the oscilloscopes are drawn
-scaled $\frac{1}{2}$. This reduced scale is not represented.}
-
-\makeatletter
-\let\Oldpst@Oscillo\pst@Oscillo
-\def\pst@Oscillo[#1]{\scalebox{0.5}{\Oldpst@Oscillo[#1]}}
-\makeatother
-
-\par
-If you only want to see SignalA then set \HLTTc{offset2} in order to have
-$\HLTTc{offset2}\in ]-\infty,-4\times \HLTTc{sensivity2}[ \cup
-]4\times\HLTTc{sensivity2},+\infty[$:
-
-\begin{SideBySideExample}[label=SignalB invisible, xrightmargin=5.5cm]
- \Oscillo[offset2=/HLCBWz(5)]
-\end{SideBySideExample}
-
-Let's have a look at Channel A:
-
-\begin{CenterExample}[label=The importance of sensivity]
- % Extrema invisible
- \Oscillo[offset2=5,/HLCBWz(amplitude1)=5]
- % Good sensivity choice
- £\hfill
- \Oscillo[offset2=5,amplitude1=5,/HLCBWz(sensivity1)=2]
-\end{CenterExample}
-
-Now, let's have two signals on Channel A and B. By default, the two signals have the
-same period and the same phase:
-
-\begin{CenterExample}
- % Different amplitude
- \Oscillo[amplitude1=3,/HLCBWz(amplitude2)=1.5]
- % Different period
- £\hfill
- \Oscillo[amplitude1=3,amplitude2=1.5,/HLCBWz(period2)=50]
- % Different phase
- £\hfill
- \Oscillo[amplitude1=3,amplitude2=1.5,/HLCBWz(phase1)=60,/HLCBWz(phase2)=-30]
-\end{CenterExample}
-
-\begin{SideBySideExample}[label=Damping and amplification,xrightmargin=5.5cm]
- \Oscillo[amplitude1=3,amplitude2=1.5,
- /HLCBWz(damping2)=0.005,/HLCBWz(damping1)=-0.005]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[label=Changing the time scale,xrightmargin=5.5cm]
- \Oscillo[amplitude2=1.5,/HLCBWz(timediv)=10]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[label=Vertical translations,xrightmargin=5.5cm]
- \Oscillo[amplitude1=1.5,amplitude2=1.5,
- /HLCBWz(offset1)=1.5,/HLCBWz(offset2)=-1.5]
-\end{SideBySideExample}
-
-\begin{CenterExample}[label=Changing the plot style]
- /HLCBWz(\newpsstyle){BlueDots}{plotstyle=dots,
- linecolor=blue,linewidth=0.02,plotpoints=50}
- \Oscillo[amplitude1=3,/HLCBWz(plotstyle2)=BlueDots,amplitude2=2]
- /HLCBWz(\newpsstyle){GreenDash}{linestyle=dashed,
- linecolor=green,linewidth=0.035,plotpoints=50}
- £\hfill
- \Oscillo[amplitude1=2,phase1=90,amplitude2=3.8,period1=25,
- period2=50,phase2=10,/HLCBWz(plotstyle1)=GreenDash]
-\end{CenterExample}
-
-\subsection{Channel C: operations}
-
-Note that \HLTTc{offset1} and \HLTTc{offset2} are \textbf{not} taken into account in
-the operations when the \HLTTc{combine} parameter is set to true.
-
-\begin{CenterExample}[label=Additions]
- \Oscillo[amplitude2=1.5,period2=50,period1=10,
- /HLCBWz(combine)=/HLCBWz(true),/HLCBWz(operation)=/HLCBWz(add)]
- £\hfill
- \Oscillo[amplitude2=1.5,period2=50,period1=10,
- /HLCBWz(combine)=/HLCBWz(true),/HLCBWz(operation)=/HLCBWz(add),offset1=2,offset2=2]
- £\hfill
- % SignalA and SignalB are invisible
- \Oscillo[amplitude2=1.5,period2=50,period1=10,
- /HLCBWz(combine)=/HLCBWz(true),/HLCBWz(operation)=/HLCBWz(add),offset1=6,offset2=6]
-\end{CenterExample}
-
-\begin{SideBySideExample}[label=Subtraction,xrightmargin=5.5cm]
- \Oscillo[amplitude2=1.5,period2=50,period1=10,
- /HLCBWz(combine)=/HLCBWz(true),
- /HLCBWz(operation)=/HLCBWz(sub)]
-\end{SideBySideExample}
-
-\begin{CenterExample}[label=Multiplications]
- \Oscillo[amplitude2=1.5,period2=50,period1=10,
- /HLCBWz(combine)=/HLCBWz(true),/HLCBWz(operation)=/HLCBWz(mul)]
- £\hfill
- \Oscillo[amplitude1=1,amplitude2=2,
- period2=50,period1=2,/HLCBWz(combine)=/HLCBWz(true),/HLCBWz(operation)=/HLCBWz(mul)]
-\end{CenterExample}
-
-\subsection{Channel C: XY-mode}
-
-\begin{SideBySideExample}[label={Basic \textsc{Lissajous} curve},xrightmargin=5.5cm]
- \Oscillo[/HLCBWz(Lissajous)=/HLCBWz(true),amplitude2=2]
-\end{SideBySideExample}
-
-\begin{CenterExample}
- \Oscillo[Lissajous=true,amplitude2=3,phase2=45]
- £\hfill
- \Oscillo[Lissajous=true,amplitude2=2,phase2=90]
-\end{CenterExample}
-
-\begin{CenterExample}
- \Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
- period1=20,period2=10,phase2=0,Lissajous=true]
- £\hfill
- \Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
- period1=25,period2=5,phase2=60,Lissajous=true]
-\end{CenterExample}
-
-\begin{SideBySideExample}[label={A damped \textsc{Lissajous} diagram},xrightmargin=5.5cm]
- \Oscillo[amplitude1=3.5,phase1=90,
- amplitude2=3.5,period1=50,period2=50,
- Lissajous=true,damping1=0.01,damping2=0.01]
-\end{SideBySideExample}
-
-\subsection{Non sinusoidal signals}
-
-\begin{CenterExample}[label=Exponential signals]
- \Oscillo[amplitude1=3.5,phase1=90,
- period1=/HLCBWz(2E30),offset2=5,damping1=0.02]
- £\hfill
- \Oscillo[amplitude1=3.5,phase1=90,
- period1=/HLCBWz(2E30),offset2=3,amplitude2=-3,damping1=0.02,
- period2=/HLCBWz(2E31),damping2=0.02,phase2=90]
-\end{CenterExample}
-
-\textbf{Note:} the maximum value for \HLTTc{period1} and \HLTTc{period2} is $\pm$2E31.
-
-\begin{CenterExample}[label={Non-sinusoidal signals}]
- \Oscillo[/HLCBWz(Wave1)=/HLCBWz(\TriangleA),amplitude2=2,period2=20,period1=25]
- £\hfill
- \Oscillo[/HLCBWz(Wave1)=/HLCBWz(\RectangleA),amplitude2=2,period2=20,period1=25]
-\end{CenterExample}
-
-\begin{CenterExample}[label=Combine examples]
- \Oscillo[Wave2=\TriangleB,combine=true,operation=mul,amplitude2=2,
- period2=50,period1=2,amplitude1=1]
- £\hfill
- \Oscillo[combine=true,operation=add,amplitude2=1.5,
- Wave1=\RectangleA,amplitude1=1.5,period2=15]
- £\hfill
- \Oscillo[combine=true,operation=add,amplitude2=1.5,
- Wave1=\RectangleA,amplitude1=1.5,period2=15,Wave2=\TriangleB]
-\end{CenterExample}
-
-\begin{CenterExample}[label={Dog's tooth signal}]
- \Oscillo[combine=true,operation=mul,amplitude2=1.5,
- /HLCBWz(Wave1)=/HLCBWz(\RDogToothA),amplitude1=1.5,period2=15]
- £\hfill
- \Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,
- period1=25,period2=6.25,phase2=0,Lissajous=true,Wave2=\RDogToothB]
-\end{CenterExample}
-
-\subsection{Frequency modulation examples}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[/HLCBWz(periodmodulation1)=200,/HLCBWz(freqmod1)=5,period1=30,
- timediv=50,plotpoints=1000,amplitude2=2,period2=200]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,
- period2=25,period1=2,combine=true,operation=mul]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,/HLCBWz(CC2)=2,
- period2=25,period1=2,combine=true,operation=mul,offset1=5]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,CC2=1.5,Wave2=\TriangleB,
- period2=25,period1=2,combine=true,operation=mul,offset1=5]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
- period2=25,period1=2,combine=true,operation=mul,offset1=5]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
- period2=20,period1=3,combine=true,operation=mul,offset1=5]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,CC2=2,Wave2=\RDogToothB,
- period2=25,period1=2,combine=true,operation=mul,
- offset1=5,offset3=-1]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=1,amplitude2=1,CC2=-2,Wave2=\LDogToothB,
- period2=20,period1=3,combine=true,operation=mul,
- offset1=5,offset3=1]
-\end{SideBySideExample}
-
-\subsection{More examples}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,period1=50,
- period2=50,phase2=0,Lissajous=true,damping1=0.01,
- Wave2=\RectangleB]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=2,amplitude2=1.8,Wave1=\RectangleA,
- Fourier=500,period1=25,period2=12.5,combine=true,
- operation=add,Wave2=\RectangleB]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=4,amplitude2=3,period1=50,
- period2=5,Lissajous=true,Wave1=\RectangleA]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=3,phase1=90,amplitude2=3,damping1=0.05,
- period1=25,period2=12.5,phase2=0,
- Lissajous=true,Wave2=\RDogToothB]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=4,amplitude2=3,period1=25,
- period2=50,Lissajous=true,damping1=0.02,
- Wave2=\TriangleB]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[Wave2=\LDogToothB,combine=true,operation=mul,
- amplitude2=2,period2=50,period1=2,amplitude1=1]
-\end{SideBySideExample}
-
-\begin{SideBySideExample}[xrightmargin=5.5cm]
- \Oscillo[amplitude1=3.5,phase1=90,amplitude2=3.5,period1=50,
- period2=50,phase2=0,Lissajous=true,damping1=0.01,
- Wave2=\RectangleB,damping2=0.01]
-\end{SideBySideExample}
-
-\end{document}